Place the SDR104/HS200/HS400 checks into the mmc_deinit() and always
call it. This simplifies the code and removes ifdeffery. No functional
change is expected.
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Do not access SCC when sending commands during tuning operation as that
will disrupt the tuning operation. The tuning operation is adjusting the
SCC settings itself in execute_tuning callback.
When renesas_sdhi_execute_tuning() is called by the MMC core code, a loop
which consists of renesas_sdhi_prepare_tuning(), mmc_send_tuning() and
renesas_sdhi_compare_scc_data() iterates over each SCC tuning tap.
The renesas_sdhi_prepare_tuning() configures the SCC tuning tap number into
hardware, mmc_send_tuning() triggers transfer of tuning block which depends
on the bus mode for which the bus is currently being tuned, this information
is supplied by the MMC core code, and finally renesas_sdhi_compare_scc_data()
tests the received tuning block for validity.
Because renesas_sdhi_prepare_tuning() configures the SCC tuning tap into
the hardware to fit the tuning operation, mmc_send_tuning() which triggers
command transfer using renesas_sdhi_send_cmd() must not manipulate with
the SCC in any way. Currently renesas_sdhi_send_cmd() does unconditionally
call renesas_sdhi_check_scc_error(), which may adjust the SCC tuning tap
position by writing RENESAS_SDHI_SCC_TAPSET, which would overwrite the
required tuning configuration set by renesas_sdhi_prepare_tuning() and
disrupt the tuning operation.
Fix this by skipping the renesas_sdhi_check_scc_error() call in case the
MMC subsystem is in tuning state. This way, the SCC settings are left
unmodified by command transfer during tuning operation.
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Tested-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Set generic mmc->tuning flag when performing tuning to indicate
this condition to drivers. Drivers may use this to bypass various
checks during tuning.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
This hs400_tuning is a flag, make it bool. No functional change.
This will be useful in the following patch, which adds another
more generic flag, where the compiler can better use the space
now reserved for the u8 to store more flags in it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
The current code uses the state of tuning block received by SCC to
determine whether or not to send transmission stop command. This is
not correct. Use the state of tuning block transfer to determine
whether or not to send transmission stop command instead, because
the transmission stop command has to be sent in case the tuning
block transfer failed.
This requires two changes, separate variable to store and check the
state of tuning block received by SCC, and another separate variable
to store and check return value from transmission stop command.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Tested-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
In case a CRC error occurs during DMA transfer, the transfer completion
flag is not set in TMIO_SD_DMA_INFO1 and the transfer would eventually
time out. The timeout could be very long in case the transfer consists
of a large amount of blocks, the base timeout is 10 seconds and every
block adds 100 us more.
In case a CRC error does occur, a completion flag is set in a different
register, TMIO_SD_INFO1. Use this other completion flag to detect DMA
transfer ended and stop waiting for TMIO_SD_DMA_INFO1 completion flag.
This reduces the lengthy timeout in case of an error. The unconditional
check of TMIO_SD_DMA_INFO2 register for DMA related errors must not be
skipped in any case to actually recognize the DMA error and report it.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Tested-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
The PL180/MMCI driver is implied to use CONFIG_DM and the ARM
defconfigs such as configs/vexpress_ca9x4_defconfig will get it
as well.
With a simple oneline to default to not being the v2 variant,
the original ARM MMCI variant works fine with the driver as well.
The IP version actually needs to be read out from a register on
the ARM versions, but we will simply assume we are running on the
original hardware if arm,primecell-periphid is not explicitly
specified in the device tree.
Drop the !CONFIG_DM code and depend on DM_MMC.
Tested on the Versatile Express CA9x4 board.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With MMC_PWRSEQ enabled the following link issue may happen when
building SPL and SPL_PWRSEQ is not enabled.
aarch64-linux-gnu-ld.bfd: drivers/mmc/meson_gx_mmc.o: in function `meson_mmc_probe':
drivers/mmc/meson_gx_mmc.c:295: undefined reference to `pwrseq_set_power'
Fix this by adding a SPL_MMC_PWRSEQ Kconfig option used to enable mmc
pwrseq support in SPL.
Also add depends on DM_GPIO to fix following link issue:
aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.o: in function `mmc_pwrseq_set_power':
drivers/mmc/mmc-pwrseq.c:26: undefined reference to `gpio_request_by_name'
aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.c:29: undefined reference to `dm_gpio_set_value'
aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.c:31: undefined reference to `dm_gpio_set_value'
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
If the CSD register contains a reserved value (4 - 7) in bits 0:2 of the
TRAN_SPEED field, a buffer overrun occurs. Resize the mapping table.
According to the original report
https://lore.kernel.org/u-boot/20180826231332.2491-11-erosca@de.adit-jv.com/
reserved values have been observed resulting in a buffer overrun.
Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Fixes: 272cc70b211e ("Add MMC Framework")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Commit 3f190c55a4211215914126b74357344342329943
("drivers: misc: Add socfpga_dtreg driver for Intel SoCFPGA")
This commit rename CONFIG_SPL_SOCFPGA_SEC_REG to CONFIG_SPL_SOCFPGA_DT_REG
in Makefile.
Signed-off-by: Wan Yee Lau <wan.yee.lau@intel.com>
Add Kconfig that enables FPGA reprogramming with warm boot on Arria 10.
This option allows to change the bitstream on the filesystem and apply
changes with warm reboot without the need for a power cycle.
Signed-off-by: Michał Barnaś <barnas@google.com>
The second patch is by Arseniy Krasnov and adds basic support for Amlogic
Meson NAND controller on AXG.
The following four patches are by Alexander Dahl and apply some fixes to
drivers/mtd/nand/raw/ and port some changes applied in Linux.
The following patch is by Bruce Suen and adds support for XTX SPINAND.
Finally, the last patch is again by Arseniy Krasnov and adds access to
OTP region, supporting info, dump, write and lock operations.
-----BEGIN PGP SIGNATURE-----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=vjgL
-----END PGP SIGNATURE-----
Merge tag 'u-boot-nand-20240414' of https://source.denx.de/u-boot/custodians/u-boot-nand-flash
The first patch is by Weizhao Ouyang and avoids sf probe crashes.
The second patch is by Arseniy Krasnov and adds basic support for Amlogic
Meson NAND controller on AXG.
The following four patches are by Alexander Dahl and apply some fixes to
drivers/mtd/nand/raw/ and port some changes applied in Linux.
The following patch is by Bruce Suen and adds support for XTX SPINAND.
Finally, the last patch is again by Arseniy Krasnov and adds access to
OTP region, supporting info, dump, write and lock operations.
Add access to OTP region. It supports info, dump, write and lock
operations. Usage example:
'mtd otpread nand0 u 0 1024' - dump 1024 bytes of user area starting
from offset 0 of device 'nand0'.
'mtd otpwrite nand0 10 11223344' - write binary data 0x11, 0x22, 0x33,
0x44 to offset 10 to user area of device 'nand0'.
'mtd otplock nand0 0 1024' - lock 1024 bytes of user area starting
from offset 0 of device 'nand0'.
'mtd otpinfo nand0 f' - show info about factory area of device 'nand0'.
Link: https://lore.kernel.org/all/20240326223919.3781-1-avkrasnov@salutedevices.com
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Add support for XTX XT26G0xA and XT26xxxD. The driver is ported from
linux-6.7.1. This driver is tested on Banana BPI-R3 with XT26G01A and
XT26G12D.
Link: https://lore.kernel.org/all/20240312014314.15454-1-bruce_suen@163.com
Signed-off-by: Bruce Suen <bruce_suen@163.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Introduced with commit 6a8dfd57220d ("nand: atmel: Add DM based NAND
driver") when driver was initially ported from Linux. The context
around this and especially the code itself suggests 'read' is meant
instead of write.
The fix is the same as accepted in Linux already with mainline Linux
kernel commit 1c60e027ffde ("mtd: nand: raw: atmel: Fix comment in
timings preparation").
Link: https://lore.kernel.org/all/20240320090214.40465-6-ada@thorsis.com
Link: https://lore.kernel.org/linux-mtd/20240307172835.3453880-1-miquel.raynal@bootlin.com/T/#t
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
One tab in general. One tab plus two spaces for help text.
Link: https://lore.kernel.org/all/20240320090214.40465-4-ada@thorsis.com
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Introduced in upstream Linux with commit 7a08dbaedd365 for release v5.0.
When the new atmel nand driver was backported to U-Boot with commit
6a8dfd57220d ("nand: atmel: Add DM based NAND driver") that definition
was added to the driver instead of the header file. Move it over to the
other definitions with the same help text it has in Linux.
Code actually using this has not been ported over to raw nand base yet.
Link: https://lore.kernel.org/all/20240320090214.40465-3-ada@thorsis.com
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
In every other place in this file the macro is used, make it consistent.
Link: https://lore.kernel.org/all/20240320090214.40465-2-ada@thorsis.com
Fixes: 9d1806fadc24 ("mtd: nand: Get rid of mtd variable in function calls")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Basic support for Amlogic Meson NAND controller on AXG. This version
works at only first EDO mode.
Based on Linux version 6.7.0-rc4.
Link: https://lore.kernel.org/all/20240210223927.570043-1-avkrasnov@salutedevices.com
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Handle the return value of spi_flash_probe_bus_cs() to avoid sf probe
crashes.
Link: https://lore.kernel.org/all/20240104114619.280513-1-o451686892@gmail.com
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Documentation:
* bump build dependency idna to 3.7
* update docker image reference to latest
* fix section levels in gen_compile_commands
* fix references to trace doc
UEFI:
* eliminate duplicate runtime section definitions
* let 'EFI using ACPI tables at' be a debug message
* sanitize efi_tcg2_final_events_table definition
* move efi_var_collect to common functions
* improve error messages in variables unit test by using
EFI_UNSUPPORTED for private authenticated variables
-----BEGIN PGP SIGNATURE-----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=PpZf
-----END PGP SIGNATURE-----
Merge tag 'efi-2024-07-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2024-07-rc1-2
Documentation:
* bump build dependency idna to 3.7
* update docker image reference to latest
* fix section levels in gen_compile_commands
* fix references to trace doc
UEFI:
* eliminate duplicate runtime section definitions
* let 'EFI using ACPI tables at' be a debug message
* sanitize efi_tcg2_final_events_table definition
* move efi_var_collect to common functions
* improve error messages in variables unit test by using
EFI_UNSUPPORTED for private authenticated variables
While we unlikely to have an issue with CVE-2024-3651, it is simple
enough to bump our version of idna to receive the fix, do so.
Reported-by: GitHub dependabot
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The README.trace has been moved and converted to rst in commit dce26c7d56ed
("doc: move README.trace to HTML documentation"); fix all the remaining
references to this file.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The length of the variable name typically is not 1.
Neither the length of the variable name nor the size of the appended
data is known in the include.
* Define the size of element variable_name as variable.
* Remove the unusable element variable_data.
Addresses-Coverity-ID: 467400 Out-of-bounds read
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The message "EFI using ACPI tables at %lx\n" is only of interest when
debugging. Make it a debug message.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The following symbols are defined in two includes:
* __efi_runtime_start[]
* __efi_runtime_stop[]
* __efi_runtime_rel_start[]
* __efi_runtime_rel_stop[]
Eliminate the definitions in efi_loader.h.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
efi_var_collect() was initially placed in efi_var_file.c, since back
then we only supported efi variables stored in a file. Since then we
support variables stored in an RPMB as well and use that function to
collect variables that should be present at runtime.
So let's move it around in efi_var_common.c which makes more sense
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ilias Apalodimas <apalos@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The 2 subsections of this page ("Compatible IDEs" and "Usage") are using
the same header level as the title (with "===").
Because of this, they always appear in the HTML rendered ToC.
Drop the subsections one level lower by replacing "=" by "-".
This fixes the HTML rendering.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
commit cacc0b2678c0 ("CI: Move to latest container image") updated the
docker container image.
Reflect the change in the documentation.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Eugene Uriev <eugeneuriev@gmail.com> says:
There was no "mcheck" for U-Boot before.
Since U-Boot has only 1 thread, and normally makes 4000+ - 6000+
mallocs, it's better to use havier canaries to protect heap-chunks.
My variant uses 2x8 = 16byte-long protector. And
the multiplier could be changed to tune speed/protection tradeoff.
This protects not only against memset()-s, but against "near" wild
pointers too, and makes more probable to catch "distant" ones.
The core file of the set is included into the C-file, not complied
separately in order to enable (potential) coexisting of
mcheck-protectors, e.g. malloc_simple(.) and dlmalloc simultaneously.
My tests were for ARM SoC, 64bit, so the patch is
aware of alignment.
Primary this patch is for using by developers: to verify,
if a change doesn't break the heap integrity.
By default the mcheck is disabled and wouldn't affect the boot.
I used pedantic mode, canary=16byte, registry-size=6608.
For my system the overhead was 230ms.
The using of pre-reloc/malloc_simple heap is
too hard to follow after the relocation.
So lets drop it from the pedantic registry
and switch to dlmalloc, when moved.
The offset is ignored, but kept in the API
for the probable case, when that early
heap is relocated too.
Signed-off-by: Eugene Uriev <eugeneuriev@gmail.com>
The pedantic mode is run-time contolled, so
appropriate registry take place everytime.
Maybe it's worth to use compile-time control only.
So, the registry could be optimized out by an #ifdef.
Signed-off-by: Eugene Uriev <eugeneuriev@gmail.com>
This changes are probable worth to be generalized in a
separate .h-file so, making it able to cover
libc-mallocs and others, without too much copy-paste.
But the malloc<=>mALLOc substitutions interfere
with an elegant way to do this.
Signed-off-by: Eugene Uriev <eugeneuriev@gmail.com>
These fast helpers sometimes breach mem-chunk boundaries.
Thus they trigger mcheck alarm. Standard ones are accurate though.
Signed-off-by: Eugene Uriev <eugeneuriev@gmail.com>
Allowing multicast packets is required for IPv6 neighbor discovery
protocol.
Signed-off-by: Parvathi Bhogaraju <pbhogaraju@microsoft.com>
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
In IPv6 context, the ICMP and UDP checksum byte in the RX packet
is initially set to 0, recaclculated, and then re-inserted.
This process can result in a dirty cache line. To prevent issues,
it is essential to invalidate cache for the RX buffer before freeing
the descriptor for next DMA transfer.
This ensure that the dirty cache line doesn't inadvertently written back
due to cache eviction, there by corrupting the RX buffer
Signed-off-by: Parvathi Bhogaraju <pbhogaraju@microsoft.com>
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
MD Danish Anwar <danishanwar@ti.com> says:
Introduce ICSSG PRUETH support in uboot. The ICSSG driver is used in TI
AM654 SR2.0.
The ICSSG PRU Sub-system runs on EMAC firmware. This series Introduces
support for ICSSG driver in uboot.
This series has been tested on AM65x SR2.0, and the ICSSG interface is
able to ping / dhcp and boot kernel using tftp in uboot.
To use ICSSG2 ethernet, the ICSSG firmware needs to be loaded to PRU RPROC
cores and RPROC cores need to be booted with the firmware. This step is
done inside driver similar to kernel.
The remoteproc driver uses request_fw_into_buf() API from fs-loader driver
to load and start rproc with the required firmwares.
This series only introduces driver files. The device tree and config
changes to enable ICSSG driver will be introduced later.
ICSSG firmware supports FDB commands. Add support to send FDB commands
from driver. Once rx_flow_id is obtained from dma, let firmware know that
we are using this rx_flow_id by sending a FDB command.
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
This is the PRUSS Ethernet driver for TI AM654 SR2.0 and later SoCs with
the ICSSG PRU Sub-system running EMAC firmware. ICSSG Subsystem supports
two slices per instance. This driver caters to both slices / ports of
the icssg subsystem.
Since it is not possible for Ethernet driver to register more than one
port for a given instance, this patch introduces top level PRUETH as
UCLASS_MISC and binds UCLASS_ETH to individual ports in order to support
bringing up more than one Ethernet interface in U-Boot.
Since top level driver is UCLASS_MISC, board files would need to
instantiate the driver explicitly.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
