:hile we had hoped to be able to remove these options finally, it was
missed that zynq still requires these currently.
This reverts commit 5b9261fb0b1ed087387f2036d279fd3f4bb20a61 and
commit 099b6df556c95f5d06864612e9199eab7ba50ed3.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
The SPL_FIT_GENERATOR is long superseded by binman, drop SPL_FIT_GENERATOR
support as there are no more users.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The SPL_FIT_SOURCE is long superseded by SPL_FIT_GENERATOR which
is long superseded by binman, drop SPL_FIT_SOURCE support as there
are no more users.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
We have previously added logic to allow a "fallback" option to be
specified in the extlinux configuration. Provide a command that allows
us to set this as the preferred default option when booting.
Combined with the bootcount functionality, this allows the "altbootcmd"
to provide a means of falling back to a previously known good state
after a failed update. For example, if "bootcmd" is set to:
bootflow scan -lb
We would set "altbootcmd" to:
bootmeth set extlinux fallback 1; bootflow scan -lb
Causing the boot process to boot from the fallback option.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Replace CONFIG_USB_USB_GADGET by CONFIG_USB_GADGET_DOWNLOAD.
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The mmc erase command currently requires blk# and cnt parameters
which can be obtained using the part start and part size commands
if the entire partition needs to be erased.
Simplify the use of the mmc erase command by allowing the partition
name to be specified directly.
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Currently uclass index is used for bind/unbind which ignores alias
sequence numbering. Use device sequence number instead as it's
the number explicitly set in the DT.
Also update documentation to use sequence number.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Currently uclass index is shown in DM tree dump which ignores alias
sequence numbering. The result could be confusing since these 2 numbers
could be different. Show device sequence number instead as it's more
meaningful.
Also update documentation to use sequence number.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The UT_TESTF_ macros read as 'unit test test flags' which is not right.
Rename to UTF ('unit test flags').
This has the benefit of being shorter, which helps keep UNIT_TEST()
declarations on a single line.
Give the enum a name and reference it from the UNIT_TEST() macros while
we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
current env_set_default_vars() doesn't delete
var that are not in the imported env. hashtable
removes vars that are not in the imported
env but present in the current env only if H_NOCLEAR
flag is not set.
This change is to avoid passing H_NOCLEAR flag if
specific vars are passed to env_set_default_vars()
Without this change:
Marvell>> env default boot_mode
Marvell>>
With the change:
Marvell>> env default boot_mode
WARNING: 'boot_mode' not in imported env, deleting it!
Signed-off-by: Ravi Minnikanti <rminnikanti@marvell.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a 'upl' command to work with Universal Payload features. For now it
only supports reading and writing a handoff structure.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add documentation for the 'cpu' command, taking NXP i.MX 8M Plus
as a example.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Before adding more files, move the bootstd docs into a new directory,
with an index.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Before 9d0750064e (doc: Move external FIT docs into the main body), the
FIT property data-size was not a mandatory property and still it is not
expected to be set alongside the data property.
Move the data-size property to the "Conditionally mandatory property"
section, where it actually belongs.
Signed-off-by: Sam Povilus <sam.povilus@amd.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The Examples section should be on the second heading level.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Before 9d0750064e (doc: Move external FIT docs into the main body), the
FIT property data-size was not a mandatory property and still it is not
expected to be set alongside the data property.
Move the data-size property to the "Conditionally mandatory property"
section, where it actually belongs.
Signed-off-by: Bastian Germann <bage@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Now that am335x_evm boots OK on the Beaglebone black, drop the latter
and update the docs to cover the change.
Also add a few updates about 'make fit' and drop the note about the
security review, as U-Boot's verified boot has had quite extensive
review now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
We currently only describe the process to enable measured boot using
bootm. Describe the UEFI requirements as well which predate bootm.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Fix a trivial typo in the bootmeth documentation.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Stderr was missing from the initial description and example.
As I understand the env command documentation the subcommand style is
preferred, though the old format is still fully supported.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
This adds details that I would have liked to have readily available,
in particular how to activate the network interface before enabling
netconsole, and how to integrate netconsole so you can use the U-Boot
prompt.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
If 'env print -e' is invoked without variable name, all UEFI variables are
listed.
Describe that 'env print -e' requires CONFIG_HEXDUMP=y to print content of
UEFI variables.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add the environment variable "usb_ignorelist" to prevent USB devices
listed in it from being bound to drivers. This allows to ignore devices
which are undesirable or trigger bugs in u-boot's USB stack.
Devices emulating keyboards are one example of undesirable devices as
u-boot currently supports only a single USB keyboard device. Most
commonly, people run into this with Yubikeys, so let's ignore those in
the default environment.
Based on previous USB keyboard specific patches for the same purpose.
Link: https://lore.kernel.org/u-boot/7ab604fb-0fec-4f5e-8708-7a3a7e2cb568@denx.de/
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Janne Grunau <j@jannau.net>
List all prefix currently used for generating FAT partition names.
Describe which device class uses which prefix.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
- A new driver in the misc to register setting from device tree. This
also provides user a clean interface and all register settings are
centralized in one place, device tree.
- Enable Agilex5 platform for Intel product. Changes, modification and
new files are created for board, dts, configs and makefile to create
the base for Agilex5.
Build-tested on SoC64 boards, boot tested on some of them.
The 'rng list' command probes all RNG devices and list those devices
that are successfully probed. Also update the help info.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
In gsub, when the destination string is empty, the string 't' is
provided and the regular expression doesn't match, then the final result
is an empty string.
Example:
=> echo ${foo}
=> setenv foo
=> setexpr foo gsub e a bar
=> echo ${foo}
=>
The variable ${foo} should contain "bar" and the lack of match shouldn't
be considered an error.
This patch fixes the erroneous behavior by removing the return
statement and breaking out of the loop in case of lack of match.
Also add a test for the no match case.
Signed-off-by: Massimiliano Minella <massimiliano.minella@se.com>
With the relatively new button API in U-Boot, it's now much easier to
model the common usecase of mapping arbitrary actions to different
buttons during boot - for example entering fastboot mode, setting some
additional kernel cmdline arguments, or booting with a custom recovery
ramdisk, to name a few.
Historically, this functionality has been implemented in board code,
making it fixed for a given U-Boot binary and requiring the code be
duplicated and modified for every board.
Implement a generic abstraction to run an arbitrary command during boot
when a specific button is pressed. The button -> command mapping is
configured via environment variables with the following format:
button_cmd_N_name=<button label>
button_cmd_N=<command to run>
Where N is the mapping number starting from 0. For example:
button_cmd_0_name=vol_down
button_cmd_0=fastboot usb 0
This will cause the device to enter fastboot mode if volume down is held
during boot.
After we enter the cli loop the button commands are no longer valid,
this allows the buttons to additionally be used for navigating a boot
menu.
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Tegra30
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
