With a newer pylint we get a warning about how offset could be used
before assigned. This is because when the underlying filesystem wasn't
one that is supported we would have runtime test failures. Address this
by raise'ing an Exception if fs is not supported.
Signed-off-by: Tom Rini <trini@konsulko.com>
With a newer pylint version we get a warning about how mounted_test_fn
could be used before assignment. Evaluating the code, this can't happen
because we check for "not have_writable_fs_partition" and return before
moving to the part of the tests which use mounted_test_fn. However, we
should instead have this written so that we only try this part of the
test if have_writable_fs_partition is set, and this also fixes the
warning. As part of this we also move test_f and mounted_test_fn to the
section of code that already only does this if
have_writable_fs_partition is set.
Signed-off-by: Tom Rini <trini@konsulko.com>
When running a newer version of pylint it will complain that page_size
may be used before being assignment. Looking deeper what is going on is
that we could run in to the case where the regex we run for any of the
flash information fails but since we don't have a result, we don't check
it either. In the case of the rest of the numerical values we then have
some assignment (multiplying by some value) and so pylint doesn't
complain. Rework things to assert that each regex has a result and so
failure will stop the test and we won't have any use before assignment.
Signed-off-by: Tom Rini <trini@konsulko.com>
Up to now root has been the parent device for all block devices created via
calling ConnectController(). This does not work well together with the
implementation of bootstd.
Add a dummy parent device for all EFI block devices.
With this change EFI block devices are also accessible via commands like
'cat', 'load', and 'ls'.
=> dm tree
Class Seq Probed Driver Name
-----------------------------------------------------------
efi 0 [ + ] EFI block driver `-- efi
blk 3 [ + ] efi_blk `-- efi.efiblk#0
partition 0 [ + ] blk_partition `-- efi.efiblk#0:1
=> ls efiloader 0:1
13 hello.txt
7 u-boot.txt
2 file(s), 0 dir(s)
=> cat efiloader 0:1 hello.txt
Hello world!
=> efidebug dh
0000000018df1700 (efi.efiblk#0:1)
/VenHw(dbca4c98-6cb0-694d-0872-819c650cb7b8)/HD(1,MBR,0xd1535d21,0x1,0x7f)
Block IO
Simple File System
Adjust the event dump unit test to consider the new event spy.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini <trini@konsulko.com> says:
A challenge we've run in to is making it easier for more people to use
various python tools that we include in the tree. Part of the problem is
that when we have a requirements.txt file, aside from the doc one we
share with the kernel, I created it using "pip freeze". And while this
might have been a best (or at least OK) practice at the time, that's no
longer the case and is why our files have so many things in them. What
this series does is create multiple files, one per project/tool and then
has CI install them as needed. There's a few places here where this
means that we update the requirements as well, but we keep a few big
things where they are currently. This is because updating them
introduces problems of their own and delaing with that would best be a
follow up series. I've put this through GitLab and Azure to make sure
everything is still going fine on both platforms.
Link: https://lore.kernel.org/r/20250205000743.949790-1-trini@konsulko.com
Use the "pipreqs" tool to re-create these files, with a few manual
corrections. We still need to include pytest-xdist which the tool does
not detect. We also for now don't upgrade most of the required tools as
that creates problems with various tests, which should be resolved
independently.
Signed-off-by: Tom Rini <trini@konsulko.com>
Add unit tests for the library functions.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
[jf: drop unwanted change to lib/string.c]
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
At present the 'ut' command handles its flags in a strange way, in that
they must come after the subcommand.
So, we must use 'ut bloblist -r2' to run the bloblist tests twice. This
is an artefact of the way tests were run, through subcommands.
It is now possible to correct this, by doing flag-processing before
running the suite.
Update the code to handle this, so that 'ut -r2 bloblist' works. Update
the 'test_suite' test to check the new arguments.
Add a sanity-check for -I while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the logic from this function into run_suite(), on the way to having
flag parsing in the top-level 'ut' command instead of its children.
Signed-off-by: Simon Glass <sjg@chromium.org>
Enhance the ut command to accept a comma-separated list of test suites
to run. Report the summary information for these at the end.
Signed-off-by: Simon Glass <sjg@chromium.org>
Now that everything is using the new test-suite features, drop support
for running commands.
Fix a missing closing-bracket while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
These tests run three different checks on the nodes, but the logic is
currently all in one tests.
Split the code out into three different tests, which do different setup
and then run the same checks.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Fix the comment abotu 'environment' while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having an init function and then running the tests, create a
test-init function to do it. This will allow us to get rid of the
command function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the helpers provided for this purpose, rather than different ones in
this particular test.
Leave fdt_getprop_str() alone as it seems to have more value.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the init code into a separate function since it is quite large.
Adjust it to use unit-test functions which have become available since
the test was written.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than having this condition defined separately for each suite,
bracket all options with 'if UNIT_TEST'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some suites need things to be set up before they can run. Add a way to
declare an init function using the UNIT_TEST_INIT() macro. The init
function is just like any other test, but is always placed first so that
it runs before all the other test functions in the suite.
Add an uninit function as well, to clean up after the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
When tests are all in the same suite it is annoying to have to read all
the common text after each name. Skip this to help the user.
Signed-off-by: Simon Glass <sjg@chromium.org>
Show the average duration of a test, so we can keep track of how it is
trending. Report the suite with the longest average test to encourage
people to improve it.
Add a function to update the stats based on the results from a single
suite and another to show the summary information.
Make this optional, since sandbox's SPL tests do not have a timer driver
and people may want to print results without times.
Signed-off-by: Simon Glass <sjg@chromium.org>
Show the time taken by each test suite with 'ut all' and the total time
for all suites.
Take care to remove any sandbox time-offset from the values.
Fix the comment-format on timer_test_add_offset() while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
All tests should belong to a suite, but if there is a suite we don't
know about (e.g. not added to cmd_ut.c) then the totals will not add up.
Add a check for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
This test does not appear to use sandbox's memory-mapped I/O so there is
no need to enable it.
Even if there were a need, it should be disabled at the end of the test,
so as not to affect other tests.
Drop these lines from the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
USB tests on ext partitions can fail with the following output
test/py/tests/test_usb.py:245: in test_usb_part
'fstype usb %d:%d' % i, part_id
E TypeError: not enough arguments for format string
So add brackets around the format string arguments to prevent the
error.
Fixes: a730947974 ("test/py: usb: Distinguish b/w ext2/ext4 partitions")
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Love Kumar <love.kumar@amd.com>
Heinrich Schuchardt <heinrich.schuchardt@canonical.com> says:
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
* Remove invalid memory leak tests
Link: https://lore.kernel.org/r/20250203151029.60265-1-heinrich.schuchardt@canonical.com
The setexpr.s command allows to concatenate two strings.
According to the description in doc/usage/cmd/setexpr.rst the parameters
value1 and value2 can be either direct values or pointers to a
memory location holding the values.
Unfortunately `setexpr.s <value1> + <value2>` fails if any of the values
is a direct value. $? is set to false.
* Add support for direct values in setexpr.s.
* Correct the unit test for "setexpr.s fred 0".
* Add a new unit test for "setexpr.s fred '1' + '3'" giving '13'.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
env_set() frees the previous value after allocating the new value.
As the free() may merge memory chunks the available memory is not
expected to stay constant.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
env_set() frees the previous value after allocating the new value.
As the free() may merge memory chunks the available memory is not
expected to stay constant.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heiko Schocher <hs@denx.de> says:
In linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This series adds support for parsing this properties if there
is no label property.
Link: https://lore.kernel.org/r/20250128135246.74838-1-hs@denx.de
[trini: Document name parameter in led.h]
in linux we have the option to create the name of a led
optionally through the following properties:
- function
- color
- function-enumerator
This patch adds support for parsing this properties if there
is no label property.
The led name is created in led_post_bind() and we need some
storage place for it. Currently this patch prevents to use
malloc() instead it stores the name in new member :
char name[LED_MAX_NAME_SIZE];
of struct led_uc_plat. While at it append led tests for the
new feature.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Execution time varies widely with the existing tests. Provides a way to
produce a summary of the time taken for each test, along with a
histogram.
This is enabled with the --timing flag.
Enable it for sandbox in CI.
Example:
Duration : Number of tests
======== : ========================================
<1ms : 1
<8ms : 1
<20ms : # 20
<30ms : ######## 127
<50ms : ######################################## 582
<75ms : ####### 102
<100ms : ## 39
<200ms : ##### 86
<300ms : # 29
<500ms : ## 42
<750ms : # 16
<1.0s : # 15
<2.0s : # 23
<3.0s : 13
<5.0s : 9
<7.5s : 1
<10.0s : 6
<20.0s : 12
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
bloblist_find function only returns the pointer of blob data,
which is fine for those self-describing data like FDT.
But as a common scenario, an interface is needed to retrieve both
the pointer and the size of the blob data.
Add a few ut test cases for the new api.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The $loadaddr variable is a hexadecimal value, not a string, it must be
assigned using env_set_hex(). This may break follow up tests, like the
dm_test_cmd_hash_md5 in CI. To avoid any interference with other tests,
set $wgetaddr variable which is specific to this test and use it in the
test.
Fixes: 20f641987f ("test/cmd/wget.c: move net_test_wget() to the cmd test suite")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Up to now we could only use log level, category, and file for filtering.
Allow filtering on a list of functions.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This script can fail if there is no toolchain available for the board.
At present this is not handled very nicely, in that only the error
output is reported. It is much more useful to see everything, so
combine stdout and stderr and report them both.
Signed-off-by: Simon Glass <sjg@chromium.org>
The u-boot-test-getrole script runs before the normal environment
variables have been set up. This is unavoidable since the script is
providing necessary information to test.py
This means that U_BOOT_SOURCE_DIR is not set in the environment.
As a result, Labgrid uses its default source path, configured in its
environment variable. While this may happen to work, it is not correct.
Also, it causes problems when running from Gitlab, where the runner may
not have access to that source path.
Provide the required source path in U_BOOT_SOURCE_DIR so that Labgrid
does the right thing.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: bf89a8f1fc ("test: Introduce the concept of a role")
[1] https://patchwork.ozlabs.org/project/uboot/patch/20241211131858.520639-1-sjg@chromium.org/
Simon Glass <sjg@chromium.org> says:
The current method of running unit tests relies on subcommands of the
ut command. Only the code in each subcommand knows how to find the tests
related to that subcomand.
This is not ideal and we now have quite a few subcommands which do
nothing but locate the relevant tests in a linker list, then call a
common function to run them.
This series adds a list of test suites, so that these subcommands can be
removed.
An issue with 'ut all' is that it doesn't record how many tests failed
overall, so it is necessary to examine copious amounts of output to look
for failures. This series adds a new 'total' feature allow recording the
total number of failed tests.
To help with 'ut all' a new pytest is created which runs it (as well as
'ut info') and makes sure that all is well. Due to the 'ut all' failures
this does not pass, so the test is disabled for now. It is here because
it provides security against misnaming a test suite and causing it not
to run.
Future work may:
- get 'ut all' passing
- enable test_suite() in CL, to ensure that 'ut all' keeps passing
- record duration of each suite
- allow running the tests in random order to tease out dependencies
- tweak the output to remove common prefixes
- getting rid of bootstd, optee and seame 'ut' subcommands
Link: https://lore.kernel.org/r/20250120212613.516664-1-sjg@chromium.org
Rather than having the help in the longhelp, put it in the suite info
so 'ut info -s' can show it. This is tidier, particular due to the
removal of #ifdefs
This means that the help text is present in the image (although not
displayed with 'ut info -s') so the image-size increases. But with
UNIT_TEST enabled, we expect large images so this doesn't seem
important.
Signed-off-by: Simon Glass <sjg@chromium.org>
Put the suites in order by name, for easier code-maintenance. This also
helps find test results for a particular swuit in the 'ut all' output.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a function to show the stats, so we can decide when to print it.
This slightly adjusts the output, so that any 'test not found' message
appears on its own line after all other output.
The 'failures' message now appears in lower case so update pytest
accordingly.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is useful information and is not always the same as the 'count' arg
to ut_run_list() so add it as a separate stat.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use a struct to hold the stats, since we also want to have the same
stats for all runs as we have for each suite.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update this function to access a unit-test state, so that the caller can
collect results from running multiple suites.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is not needed anymore. If a test suite is not built, then it will
have no linker-list entries. So we can just check for that and know that
the suite is not present.
This allows removal of the #ifdefs and the need to keep them in sync
with the associated Makefile rules, which has actually failed, since the
help does not match what commands are actually present.
Signed-off-by: Simon Glass <sjg@chromium.org>
The 'info' test is not a real test. With the new suite array we can drop
this and the associated special-case code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the new suite-runner to run these tests instead.
It is not clear that these actually work, since they are not enabled on
sandbox for some reason.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the new suite-runner to run these tests instead.
It is not clear that these actually work, since they are not enabled on
sandbox for some reason.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The current cmd_ut_sub[] array was fine when there were only a few test
suites. But is quite unwieldy now:
- it requires a separate do_ut_xxx for each suite, even though the code
for most is almost identical
- running more than one suite requires running multiple commands, and
there is no record of which suites passed or failed
- 'ut all' runs all suites but reports their results individually
- we need lots of #ifdefs in the array, mirroring those in the makefile
but maintained in a separate place
In fact the tests are all in the same linker list. The suites are
grouped, so it is possible to access the information without a command.
Introduce a 'suite' array, which holds the cmd_ut_...() function to
call, but can also support running a suite without that function. This
means that the array of struct cmd_tbl is transformed into an array of
'struct suite'.
This will allow removal of many of the functions, particularly those
without test-specific init.
Signed-off-by: Simon Glass <sjg@chromium.org>
Most test suites have a _test suffix. This is not necessary as there is
also a ut_ prefix.
Drop the suffix so that (with future work) the suite name can be used as
the linker-list name.
Remove the suffix from the pytest regex as well, moving it to the top of
the file, as it is a constant.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a Python test which runs 'ut all' and then checks that the expected
suites are present and all tests in each suite are run.
This can help to check that nothing is missing.
Update 'ut info' to ignore the 'all' suite when counting the number of
suites, since that is really just a combination of all the other suites.
Adjust the message for skipped tests so that appears even if no
particular test was selected. This helps the new 'test_suite' test see
what is going on.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is helpful to see a list of available suites. At present this is
handled by the longhelp for the 'ut' command, but this is not in a
format which can be easily parsed by python tests.
Add a -s option to show this. At present it is not possible to show the
number of tests in each suite, but future work will address this. For
now, show a ?
Signed-off-by: Simon Glass <sjg@chromium.org>
Some suites have a different name from that used in the linker list.
That makes it hard to programmatically match the name printed when the
suite runs to the linker-list name it has.
Update the names so they are the same.
Signed-off-by: Simon Glass <sjg@chromium.org>
A few messages lack a newline so the test output shows the next
test-name on the same line. For example:
Beware: this test sets local variable dollar_bar and dollar_quux
and they cannot be unset!Test: hush_test_env_dollar: dollar.c
This is confusing, so fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move these operations into separate functions so that it is clearer what
is needed. These functions can also be called from somewhere other than
ut_run_list().
Signed-off-by: Simon Glass <sjg@chromium.org>
The string conversion functions are implemented in lib/strto.c which is
only compiled if CONFIG_STRTO=y.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The ofnode_find_subnode() function currently processes things two
different ways, so the treatment of unit addresses differs depending on
whether OF_LIVE is enabled or not.
Add a new version which uses the ofnode API and add a test to check that
unit addresses can be matched correctly. Leave the old function in place
for the !OF_LIVE case, to avoid a code-size increase, e.g. on
firefly-rk3288
Signed-off-by: Simon Glass <sjg@chromium.org>
When a unit-address is provided, use it to match against the node
name.
Since this increases code size, put it into a separate function.
Signed-off-by: Simon Glass <sjg@chromium.org>
In many cases it is useful to get the address of a buffer, e.g. when
booting from it. Add a function to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
We want to encourage people to use an allocated bloblist since it is
more flexible than a fixed one. Make this the default, being sure not to
change existing users.
The unit tests require BLOBLIST_FIXED so add a dependency in the
Makefile to avoid build errors.
All sandbox builds require BLOBLIST_FIXED so make that the default for
sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
Philippe Reynes <philippe.reynes@softathome.com> says:
This serie adds the support of sha256_hmac and sha256_hkdf.
A first version was sent several months ago just before the
integration of mbedtls. This new version is based on mbedtls.
The first patch of this serie add the support of hkdf
using mbedtls.
Link: https://lore.kernel.org/r/20241219130554.49825-1-philippe.reynes@softathome.com
Adds a test for the function sha256_hkdf.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Raymond Mao <raymond.mao@linaro.org>
Adds a test for the function sha256_hmac
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Raymond Mao <raymond.mao@linaro.org>
Simon Glass <sjg@chromium.org> says:
This series provides a way to keep track of the images used in bootstd,
including the type of each image.
At present this is sort-of handled by struct bootflow but in quite an
ad-hoc way. The structure has become quite large and is hard to query.
Future work will be able to reduce its size.
Ultimately the 'bootflow info' command may change to also show images as
a list, but that is left for later, as this series is already fairly
long. So for now, just introduce the concept and adjust bootstd to use
it, with a simple command to list the images.
This series includes various alist enhancements, to make use of this new
data structure a little easier.
[trini: Drop patch 18 and 19 for now due to size considerations]
Link: https://lore.kernel.org/r/20241115231926.211999-1-sjg@chromium.org
Add a new 'bootstd images' command, which lists the images which have
been loaded.
Update some existing tests to use it. Provide some documentation about
images in general and this command in particular.
Use a more realistic kernel command-line to make the test easier to
follow.
Signed-off-by: Simon Glass <sjg@chromium.org>
Raymond Mao <raymond.mao@linaro.org> says:
Motivations for changes:
Current SMBIOS library and command-line tool is not fully matching with
the requirements:
1. Missing support for other mandatory types (#7, #9, #16, #17, #19).
2. Only a few platforms support SMBIOS node from the device tree.
3. Values of some fields are hardcoded in the library other than fetching
from the device hardware.
4. Embedded data with dynamic length is not supported (E.g. Contained
Object Handles in Type #2 and Contained Elements in Type #3)
Changes:
1. Refactor the SMBIOS library and command-line tool to better align with
the SMBIOS spec.
2. Create an arch-specific driver for all aarch64-based platforms to fetch
SMBIOS private data from the device hardware (processor and cache).
3. Create a sysinfo driver to poppulate platform SMBIOS private data.
4. Add generic SMBIOS DTS file for arm64 platforms for those common strings
and values which cannot be retrieved from the system registers.
Vendors can create their own SMBIOS node using this as an example.
For those boards without SMBIOS nodes, this DTS file can be included to
have a generic SMBIOS information of the system.
5. Add support for Type #7 (Cache Information) and link its handles to
Type #4.
6. To minimize size-growth for those platforms which have not sufficient
ROM spaces or the platforms which don't need detailed SMBIOS
information, new added fields are only being built when kconfig
GENERATE_SMBIOS_TABLE_VERBOSE is selected.
Once this patch is acceptted, subsequent patch sets will add other missing
types (#9, #16, #17, #19).
Tests:
To test this with QEMU arm64, please follow the guide on dt_qemu.rst to
get a merged DT to run with.
```
qemu-system-aarch64 -machine virt -machine dumpdtb=qemu.dtb
cat <(dtc -I dtb qemu.dtb) <(dtc -I dtb ./dts/dt.dtb | grep -v /dts-v1/) \
| dtc - -o merged.dtb
qemu-system-aarch64 -machine virt -nographic -bios u-boot.bin \
-dtb merged.dtb
```
Link: https://lore.kernel.org/r/20241206225438.13866-1-raymond.mao@linaro.org
Update the cmd according to the changes of the smbios library:
1. Refactor smbios cmd print functions to match the content defined
by the specification.
2. Add new print functions for Type 3, 4 and 7.
3. Remove the fallback string "Not specified" from smbios_get_string,
as the spec requires a NULL output for those undefined strings.
4. Update the test_cmd_smbios_sandbox pytest expected result to
align with the smbios library changes and add new pytest
test_cmd_smbios_sysinfo_verbose to test the verbose smbios
output.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
test_extension.py assumes that no extension is known at test start.
This assumption is wrong because we do not come out of reboot.
A prior test may have already hunted for the extension bootdev.
Remove the invalid assert.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Andrew Goodbody <andrew.goodbody@linaro.org> says:
Picking up a series from Dan Carpenter and applying requested
changes for v2.
I had previously set CONFIG_64BIT for arm64. This patchset does the
same thing for sandbox and x86_64. (Mips and riscv were already
doing it). This CONFIG option is used in the Makefile to determine
if it's a 32 or 64 bit system for the CHECKER.
Makefile
1052 # the checker needs the correct machine size
1053 CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
Link: https://lore.kernel.org/r/20241216180736.1933807-1-andrew.goodbody@linaro.org
Should use CONFIG_64BIT to detect a 64 bit compile and not
CONFIG_PHYS_64BIT. This allows more platforms to run the
full test code.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
lmb_alloc_base() is just calling lmb_alloc_base_flags() with LMB_NONE.
There's not much we gain from this abstraction, so let's remove the
former add the flags argument to lmb_alloc_base() and make the code
a bit easier to follow.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
lmb_alloc_addr() is just calling lmb_alloc_addr_flags() with LMB_NONE
There's not much we gain from this abstraction, so let's remove the
latter, add a flags argument to lmb_alloc_addr() and make the code a
bit easier to follow.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
free_mem is a misnomer. We never update it with the free memory for
LMB. Instead, it describes all available memory and is checked against
used_mem to decide whether an area is free or not.
So let's rename this field to better match its usage.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
lmb_reserve() is just calling lmb_reserve_flags() with LMB_NONE.
There's not much we gain from this abstraction.
So let's remove the latter, add the flags argument to lmb_reserve()
and make the code a bit easier to follow.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
LMB flags is not an enum anymore. It's currently used as a bitmask
in various places of our code. So make it a u32 which is more
appropriate when dealing with masks.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
According to HTTP/1.0 standard the HTTP reply consist of
* Status Line + CRLF
* Zero or more Response Header Fields (each ended with CRLF)
* CRLF on new line (Response Header Fields end marker)
* Optional Entity Body.
Thus in response headers we state:
Content-Length = 30
but actual transferred file data is:
"\r\n<html><body>Hi</body></html>\r\n".
This is 32 bytes of data.
So we get and check for correctness 32 bytes of data, but
* The response we are used is incorrect, real server will
set Content-Length to 32.
* default_wget_info->hdr_cont_len will be set to wrong
value 30 (used for efi http booting).
Fix an issue by:
* replace bogus response with an actual response from the HTTP server
* format response to show HTTP response structure
* recalculate md5sum as transferred file data has been changed.
The server response was captured with the commands
echo -ne "<html><body>Hi</body></html>\n" > ~/public_html/test.html
echo -ne "GET /~${USER}/test.html HTTP/1.0\r\n\r\n" | netcat localhost 80 >reply.txt
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Changes:
* update to new tcp stack
* fix zero values for ISS and IRS issue (see RFC 9293)
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
Having CONFIG_OF_EMBED=y && CONFIG_BLOBLIST=n leads to the link
error:
```
ld: /tmp/ccwtRVty.ltrans28.ltrans.o:(.data.rel+0x4b0): undefined \
reference to `do_ut_bloblist'
```
Fixes: 6ea5df39e8 ("test: Only enable bloblist test when supported")
Signed-off-by: Evgeny Bachinin <EABachinin@salutedevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Having CONFIG_OF_EMBED=y && CONFIG_BLOBLIST=n leads to the link
error:
```
ld: /tmp/ccRVty.ltrans40.ltrans.o: in function `lib_test_is_enabled':
test/lib/kconfig.c:24: undefined reference to \
`invalid_use_of_IF_ENABLED_INT'
ld: test/lib/kconfig.c:26: undefined reference to \
`invalid_use_of_CONFIG_IF_ENABLED_INT'
```
Fixes: 29784d62ed ("test: Add some tests for kconfig.h")
Signed-off-by: Evgeny Bachinin <EABachinin@salutedevices.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The logic in get_details() retrieves the default source directory from
the Labgrid settings. This is convenient for interactive use, since it
allows pytests to be run from any directory and still find the source
tree.
However, it is not actually correct.
Gitlab sets the current directory to the source tree and expects that to
be used. At present it is ignored. The result is that Gitlab builds
whatever happens to be in the default source directory, ignoring the
tree it is supposed to be building.
Fix this by using the directory of the source tree, always. This is
obtained by looking at the grandparent of the conftest.py file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
Fixes: bf89a8f1fc ("test: Introduce the concept of a role")
Tested-by: Tom Rini <trini@konsulko.com>
An attempt to add the already added LMB region using
lmb_add_region_flags() ends up in lmb_addrs_overlap() check, which
eventually leads to either returning 0 if 'flags' is LMB_NONE, or -1
otherwise. It makes it impossible for the user of this function to catch
the case when the region is already added and differentiate it from
regular errors. That in turn may lead to incorrect error handling in the
caller code, like reporting misleading errors or interrupting the normal
code path where it could be treated as the normal case. An example is
boot_fdt_reserve_region() function, which might be called twice (e.g.
during board startup in initr_lmb(), and then during 'booti' command
booting the OS), thus trying to reserve exactly the same memory regions
described in the device tree twice, which produces an error message on
second call.
Return -EEXIST error code in case when the added region exists and it's
not LMB_NONE; for LMB_NONE return 0, to conform to unit tests
(specifically test_alloc_addr() in test/lib/lmb.c) and the preferred
behavior described in commit 1d9aa4a283 ("lmb: Fix the allocation of
overlapping memory areas with !LMB_NONE"). The change of
lmb_add_region_flags() return values is described in the table below:
Return case Pre-1d9 1d9 New
-----------------------------------------------------------
Added successfully 0 0 0
Failed to add -1 -1 -1
Already added, flags == LMB_NONE 0 0 0
Already added, flags != LMB_NONE 0 -1 -EEXIST
Rework all affected functions and their documentation. Also fix the
corresponding unit test which checks reserving the same region with the
same flags to account for the changed return value.
No functional change is intended (by this patch itself).
Fixes: 1d9aa4a283 ("lmb: Fix the allocation of overlapping memory areas with !LMB_NONE")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Christian Marangi <ansuelsmth@gmail.com> says:
This series is split in 2 part.
While adapting the LED boot and activity code to the new property
accepted by Rob in dt-schema repository, a big BUG was discovered.
The reason wasn't clear at start and took me some days to figure it
out.
This was triggered by adding a new phandle in the test.dts to
introduce test for the new OPs.
This single addition caused the sandbox CI test to fail in the
dm_test_ofnode_phandle_ot test.
This doesn't make sense as reverting the change made the CI test
to correctly finish. Also moving the uboot node down
after the first phandle (in test.dts the gpio one) also made
the CI test to correctly finish.
A little bit of searching and debugging made me realize the
parse phandle OPs didn't support other.dts at all and they
were still referencing phandle index from test.dts.
(more info in the related commit)
In short the test was broken all along and was working by
pure luck. The first 4 patch address and fix the problem for good.
The other 4 patch expand and address the property change for
LED boot/activity.
Posting in a single series as changes are trivial and just
to speedup review process. (and also because the second
part depends on the first)
All CI tested with azure pipeline.
Link: https://lore.kernel.org/r/20241110115054.2555-1-ansuelsmth@gmail.com
Update test for LED activity and boot to follow new implementation with
property set to the LED node phandle.
Also update a copy-paste error in the function name for the activity
tests and actually enable the test with the DM_TEST macro.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add test for ofnode options phandle helper and add new property in the
sandbox test dts.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Expand dm_test_ofnode_phandle(_ot) with new ofnode/tree_parse_phandle() op.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Fix broken dm_test_ofnode_phandle_ot test. They never actually worked
and were passing test by pure luck by having the same phandle index of
test.dts that coincicentally had #gpio-cells in the same index node.
It was sufficient to add a phandle to test.dts to make the test fail.
To correctly test these feature, make use oif the new OPs oftree to
parse phandle.
For consistency with the dm_test_ofnode_phandle, rework the test and
other.dts to use the same property with the other- prefix to every
node.
Also fix dm_test_ofnode_get_by_phandle_ot by making it more robust and
renaming the phandle property to other-phandle.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
At the moment the LMB allocator will return 'success' immediately on two
consecutive allocations if the second one is smaller and the flags match
without resizing the reserved area.
This is problematic for two reasons, first of all the new updated
allocation won't update the size and we end up holding more memory than
needed, but most importantly it breaks the EFI SCT tests since EFI
now allocates via LMB.
More specifically when EFI requests a specific address twice with the
EFI_ALLOCATE_ADDRESS flag set, the first allocation will succeed and
update the EFI memory map. Due to the LMB behavior the second allocation
will also succeed but the address ranges are already in the EFI memory
map due the first allocation. EFI will then fail to update the memory map,
returning EFI_OUT_OF_RESOURCES instead of EFI_NOT_FOUND which break EFI
conformance.
So let's remove the fast check with is problematic anyway and leave LMB
resize and calculate address properly. LMB will now
- try to resize the reservations for LMB_NONE
- return -1 if the memory is not LMB_NONE and already reserved
The LMB code needs some cleanup in that part, but since we are close to
2025.01 do the easy fix and plan to refactor it later.
Also update the dm tests with the new behavior.
Fixes: commit 22f2c9ed9f ("efi: memory: use the lmb API's for allocating and freeing memory")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
binman:
- Separate binman description from main DT
zynqmp:
- Enable binman for ZynqMP platforms
- DT sync with Linux v6.12
- Update usb5744 hub for SOMs
common:
- Drop SPL_FIT_GENERATOR support
versal2
- Enable OPTEE layers
ospi:
- Refactor the flash reset functionality
pytest:
- Fix tcminit mode handling
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZ0m53AAKCRDKSWXLKUoM
Ie4PAJ4r7EHkSngpW3QdBEb15aLxN1pC4ACcC9DDGGn04kCTChpv0CEi/kRLUBU=
=Veyg
-----END PGP SIGNATURE-----
Merge tag 'xilinx-for-v2025.04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next
AMD/Xilinx changes for v2025.04-rc1
binman:
- Separate binman description from main DT
zynqmp:
- Enable binman for ZynqMP platforms
- DT sync with Linux v6.12
- Update usb5744 hub for SOMs
common:
- Drop SPL_FIT_GENERATOR support
versal2
- Enable OPTEE layers
ospi:
- Refactor the flash reset functionality
pytest:
- Fix tcminit mode handling
Tom Rini <trini@konsulko.com> says:
Hey all,
This is picking up Simon's v5 of the above-named series and making a few
more changes so that the follow-up series I have leads to arm64 being
supported for almost all jobs. To quote Simon's cover letter:
All gitlab runners are currently amd64 machines. This series attempts to
create a docker image which can also support arm64 so that sandbox tests
can be run on it.
The TARGET_... environment variables for grub could perhaps be adjusted,
using the new variables, but I have not done that for now.
Adding to what Simon said, we now build grub for all architectures as
the reason to install it was to be able to use the binaries in QEMU.
That won't provide us with amd64 binaries on arm64 hosts so we can't use
that shortcut anymore.
Link: https://lore.kernel.org/r/20241127172247.1488685-1-trini@konsulko.com
Since char is unsigned on arm64, this test currently fails. It seems
better to use unsigned anyway, since 0xff is written into the string at
the start. Update the terminator-assert to use a character instead of a
byte.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Changes in v6:
- Re-introduce
Changes in v2:
- Use '\0' instead of 0
test/print_ut.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
When a timeout occurs while executing a command a 'Boot fail' message is
written and testing is stopped. The user is left in the dark about the
failure cause.
! _pytest.outcomes.Exit: Boot fail: Marking connection bad - no other tests will run !
Add the executed command to the message.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
When a timeout occurs while executing a command a 'Lab failure' message is
written and testing is stopped. The user is left in the dark about the
failure cause.
! _pytest.outcomes.Exit: Lab failure: Marking connection bad - no other tests will run !
Add the word 'Timeout' and the executed command to the message.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
We don't need the fallback anymore. Remove the code which uses these
files.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
We don't need the fallback anymore. As a first step to removing it,
drop the try...except clauses and unindent the code.
This produces a large diff but there are no other code changes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Like for test_fs, no need to mess with loop mounts.
Tweaks to reduce diff (keep mnt variable):
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a parameter to indicate the size of the image to build.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Since no mounting happens anymore, rename the "mnt"
directory to "scratch" and the related variables.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
There is no need to mount the filesystem on the host side.
All filesystem tools offer some way to fill the fs without mounting.
So, create the content on the host side, create and fill the fs
without mounting.
No more sudo or guestmount needed.
This new approach works because the tests don't care about user IDs
and no device files are needed.
If user IDs start to matter it's still possible to use wrapper
tools like fakeroot in future while filling the fs.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Since net_test_wget() is testing a command and is in test/cmd it should
be in the 'cmd' test suite, not 'lib'.
Saving and restoring the values of the environment variables that the
test manipulates is necessary to avoid a regression when running the
whole ut test suite. A minimal reproducer is:
$ ./u-boot -T -c "ut cmd net_test_wget; ut dm dm_test_eth_act" | \
grep -E "(Test:|Failures:)"
Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
