This option is very useful for A/B boot setups with read-only
filesystems: Letting U-Boot fill in the rootfs (and possibly related
parameters) allows keeping all boot parameters except the actual slot
selection in the extlinux.conf file, where they can be updated easily.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Cc: Tom Rini <trini@konsulko.com>
The note about U-Boot not being able to verify server certificates is
false now that WGET_CACERT and WGET_BUILTIN_CACERT have been added.
Remove it.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Add information on type partition, copied from README.gpt.
I also correct issue for gpt_parts variable and add example of
"gpt read" usage.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0
(R8A779G3) SoC. This is a single-board computer with single gigabit ethernet,
DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports,
micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD,
debug UART and JTAG.
DT is imported from Linux next commit:
a719915e76f2 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Fix a typo error in gcc.rst, changing "out-out-tree" to
"out-of-tree" in the Out-of-tree section.
Signed-off-by: BehradElmi <behradelmi1@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
There are backslashes in some of the tags which seems to be unnecessary.
Remove then.
Change the word 'either' to 'any' since there are three options.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The details of the sysfw.itb from the R5 build that
also needs to be copied as part of the target images
is missing, but is included in the image formats a
little further down, so add it to the instructions.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
The last platform to enable this driver was removed in 2019. Remove this
unused code and documentation now.
Signed-off-by: Tom Rini <trini@konsulko.com>
Include these function so they can be browsed in the API docs. Exclude
END since it causes a warning, which becomes an error:
./include/efi_device_path.h:22: warning: cannot understand function
prototype: 'const struct efi_device_path END; '
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Support for eMMC, SD card, GPIO and SPL have been available in LPi4A
port. Update the documentation of support status and build
instructions.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Functions called from EFI applications should not do console output.
Refactor the wget code to implement this requirement. The wget_http_info
struct is used to hold the boolean that signifies whether the output is
allowed or not.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
In some cases we have alternative configuration options that supply the
same functionality, e.g CONFIG_NET and CONFIG_NET_LWIP.
Allow to specify all of them as arguments for buildconfigspec() and execute
the text if any of these is fulfilled, e.g.
@pytest.mark.buildconfigspec('net', 'net_lwip')
Update the documentation.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
After the original series was merged, Quentin noted that we could handle
adding additional tests more easily by using the glob feature. Do so.
Suggested-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Mention that RISC-V supports semihosting.
Update the link to ARM's semihosting documentation
Update SPDX identifier to current format.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add this test to the documentation. No changes to the test itself were
required.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add this test to the documentation. There was already a function comment
that included the argument, so convert it to the right style to be
rendered correctly in output.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add this test to the documentation. None of the functions had comments,
so attempt to explain what each does.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add this test to the documentation. We need to add a code-block
annotation to the example and indent it correctly. We also need to
document the do_test_efi_helloworld_net function and that in turn means
changing the documentation to test_efi_helloworld_net_http and
test_efi_helloworld_net_tftp to reflect what is and isn't done in those
functions themselves now.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add this test to the documentation. We need to move the import to follow
the main comment so that it renders correctly, and add a code-block
annotation to the example and indent it correctly. Next, neither of the
functions had comments themselves, so document them now.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add this test to the documentation. While the diff appears large at
first, the only changes within the test are to move the imports to
follow the pydoc comment and then to code-block and indent the example
configuration.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add the test_net_boot.py test to the generated documentation. While most
of this was already commented correctly for inclusion the biggest
problem was examples of code without a code-block notation. This in turn
broke parsing. Add the missing notations. We also must have the comment
prior to any import lines or it will not be seen as a comment on the
overall file and thus not included.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
In order to easily document pytests, we need to include the autodoc
extension. We also need to make sure that for building the docs, CI
includes pytest and that we have PYTHONPATH configured such that it will
find all of the tests and related files. Finally, we need to have our
comments in the test file by in proper pydoc format in order to be
included in the output.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Begin the work of documenting all of our pytests. To do this, we should
have a directory under develop for it as there will be a large number of
new files. As the current document is referenced externally in a number
of locations, add the sphinx_reredirects module so that we can redirect
from the old location to the new.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The scripts u-boot-test-release is called at the end of testing.
Describe it.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Using power cycling is a valid option to implement u-boot-test-reset.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Since Ubuntu Jammy lz4-tools is only a virtual package which pulls in
lz4 as dependency.
Update documentation too.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
I haven't been involved in U-Boot development for quite a while, so
CCing me on patches isn't currently useful. Add a .mailmap entry that I
believe will turn off patch CCs. This can always be removed if I become
active again! Remove myself from a few MAINTAINERS failed and the git
mailrc file too.
The LG Optimus 2X is a touchscreen-based, slate-sized smartphone designed
and manufactured by LG that runs the Android operating system. The
Optimus 2X features a 4" WVGA display, an Nvidia Tegra 2 dual-core chip,
512 MB of RAM and extendable 8 GB of internal storage. UART-B is default
debug port.
Tested-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The LCKFB TaishanPi is a single-board computer based on the RK3566 SoC.
Specification:
- 1/2 Gib RAM
- Optinal EMMC
- SD-Card
- HDMI / MIPI CSI / MIPI DSI
- USB 2.0 Host (Type-A)
- USB 2.0 Host / OTG (Type-C)
- No Ethernet
This patch adds U-Boot support for the LCKFB TaishanPi RK3566 board, including:
- U-Boot device tree
- Default defconfig
- Board documentation
- MAINTAINERS entry
Changes in v2:
- Removed unused configs from `lckfb-tspi-rk3566_defconfig`
- Reordered TaishanPi entry in `doc/board/rockchip/rockchip.rst` alphabetically
Link to v1:
https://lore.kernel.org/u-boot/tencent_95ED0C0545D87B6A8C4B62EC045D53AD2406@qq.com/
Signed-off-by: Jiehui He <jiehui.he@foxmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The 5 Max is another board in the Orange Pi 5 family.
It's overall similar to the 5 Plus, but in a smaller form factor,
which leads to some I/O being reshuffled, but nothing relevant
to u-boot.
So, just reuse the config for the 5 Plus and adjust the DT names.
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Ilya Katsnelson <me@0upti.me>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This patch adds i.MX95 19x19 EVK board basic support.
Messaging unit for EdgeLock Secure Enclave, messaging unit for System
Manager, uSDHC for SD Card, gpio, lpuart are supported now.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Nishanth Menon <nm@ti.com> says:
Just happened to get a BeagleY-AI at desk and happened to test master
branch (7dd49a9264 drivers: scsi: Add 'erase' support), noticed a few
issues which were rather easy to solve.. so, here we go:
Link: https://lore.kernel.org/r/20250425173120.141503-1-nm@ti.com
The code-block directive requires addition of the prompt symbol for each
line, using the prompt directive instead allows for auto insertion of
the symbol per line[1].
For the readers, the character added by the prompt directive is
un-selectable i.e the entire line can be more easily selected for copy
pasting etc. Whereas with code-block, the prompt symbol like "$" is also
selectable which is usually not the intent.
This is mostly a QoL addition + making the docs consistent since k3.rst
makes use of prompt directives which these board docs include from.
[1]: https://pypi.org/project/sphinx-prompt/
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Provide the settings for using the debug UART in SPL.
Reviewed-by: E Shattow <e@freeshell.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
