As exposed by "make randconfig", we have an issue with the dependencies
for REGMAP (and xPL variants). As this is a library function, it should
always be selected and not depended on by other functionality. This is
largely done correctly today, so just correct the few outliers.
Acked-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issue with the dependencies
for QCOM_GENI. The symbol PARTITION_TYPE_GUID depends on EFI_PARTITION
and this driver cannot function without both being set, so select that
as well.
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Quentin Schulz <quentin.schulz@cherry.de> says:
This migrates the last user of the legacy LED API, IMX233-OLinuXino and
net/bootp.c, to the modern LED framework.
I do have concern about being able to use BOOTP in SPL? In which case, I
should probably add an additional check on CONFIG_IS_ENABLED(LED) in
addition to IS_ENABLED(CONFIG_LED_BOOT)?
I haven't tested this as I do not own an IMX233-OLinuXino, so please
give this a try if you own this device.
Then, since there's no user left of this legacy API, it is entirely
removed.
Link: https://lore.kernel.org/r/20251120-legacy-led-removal-v1-0-369d44338358@cherry.de
No user of the legacy LED API anymore (except Sunxi with the PinePhone
but that is now a Sunxi-specific implementation), so let's remove
anything related.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
The XSPI SET GMID command is used to assign GMID ownership to the
requester, allowing access to protected XSPI control registers. This API
must be called in SPL if XSPI GMID-protected settings need to be
modified. Otherwise, XSPI configuration depends on the previous GMID
owner to provide the correct settings.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
If CONFIG_CMD_FUSE is not enabled in imx93_11x11_evk_defconfig, then
compilation fails with various undefined references to 'fuse_read',
such as:
| .../arch/arm/mach-imx/imx9/soc.c:188:(.text.get_cpu_rev+0x38): undefined reference to `fuse_read'
therefore remove the 'fuse' command dependency in order to compile
fuse.c unconditionally to mitigate the issue.
Signed-off-by: Niko Mauno <niko.mauno@vaisala.com>
K3 OTP bits can only be programmed 25bits at a time. Limit the value
accordingly using a 25 bit mask.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Error out if readback value doesn't match the programmed value.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Use signed int format to print error codes so that its more readable
Fixes: ed5f2e5bed91 ("drivers: k3_fuse: Add fuse sub-system func calls")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Add support for the OTP controller in RK3506. The OTPC is similar to the
OTPC in RK3568 and can use the same ops for reading OTP data.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
add function sc_misc_get_boot_type() which returns the
boot type.
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Signed-off-by: Walter Schweizer <walter.schweizer@siemens.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.
Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <anshuld@ti.com> #TI boards
Acked-by: Yao Zi <me@ziyao.cc> #TH1520
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This symbol is used on a number of PowerPC platforms as well, so make it
available there again.
Fixes: 424b324165ea ("armv7: Add CPLD support via IFC to the ls1021a-iot board.")
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
On GDET enabled part, need to call voltage change start and finish
APIs when adjust the voltage more than 100mv. Otherwise GDET will be
triggered and system is reset
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The "fixed-layout" nvmem controller subnode used to be optional wrapper
around nvmem controller cells subnodes. The "fixed-layout" node is now
mandatory in most cases, but in order to support both recent and legacy
DTs, both variants have to be supported.
Implement support for the "fixed-layout" node in the most trivial manner,
check whether the nvmem cell supernode is compatible with "fixed-layout"
and if it is, proceed one level above it to find the nvmem controller.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
To the exception of red_led_on in the arm-specific assembly code, all
code interacting with the red status LED was guarded by the
CONFIG_LED_STATUS_RED symbol, which is enabled in none of the upstream
defconfigs.
Since the last board which overrode the weak red_led_on function got
migrated to the new LED mechanism, there's also no user of the
arm-specific assembly code anymore, therefore it can be removed along
the other unreachable code sections.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
The last user of it was removed in a previous commit so let's remove its
support entirely.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
The last user of coloured_LED_init has been recently removed, so we can
remove all places it's called and defined as it does nothing now.
Nobody makes use of the yellow and blue status LEDs from the legacy API,
so let's remove all references to it.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
On RISC-V QEMU provides an XSDT table. The RSDP table points to it.
We must not zero out this pointer because otherwise no ACPI table can be
found.
Fixes: 15ca25e31ed5 ("x86: emulation: Support BLOBLIST_TABLES properly")
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Qualcomm peripherals like UART, SPI, I2C, etc are all exposed under a
common GENI Serial Engine wrapper device. Replace the stub driver we use
for this currently with a full-on misc device and implement support for
loading peripheral firmware.
Each of the peripherals has it's own protocol-specific firmware, this is
stored on the internal storage of the device with a well-known partition
type GUID.
To support this, GENI will bind peripherals in two stages. First the
ones that already have firmware loaded (such as the serial port) are
bound in the typical way. But devices that require firmware loading are
deferred until EVT_LAST_STAGE_INIT. At this point we can be sure that
the storage device is available, so we load the firmware and then bind
and probe the remaining children.
Child devices are expected to determine if firmware loading is necessary
and call qcom_geni_load_firmware().
Since Linux currently doesn't support loading firmware (and firmware may
not be available), we probe all GENI peripherals to ensure that they
always load firmware if necessary.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://patch.msgid.link/20250714-geni-load-fw-v5-3-5abbc0d29838@linaro.org
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>
There is nothing x86-centric in this include file, and moving it will
allow for some drivers to be compile-tested on sandbox.
Signed-off-by: Tom Rini <trini@konsulko.com>
The script based firmware loader does not use anything from the
fs_loader implementation. Separate it into its own library source
file and convert the mediatek PHY to use this separate code. This
should reduce the amount of code that is pulled in alongside the
firmware loader, as the FS loader is no longer included.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
This driver cannot build without access to some platform specific header
files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Use plain buffer pointer in request_firmware_into_buf_via_script()
instead of a pointer to pointer. The later is not necessary as the
request_firmware_into_buf_via_script() does not modify the buffer
pointer. Update the mediatek driver to match.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
The ahab_commit command allows the user to commit into the SECO fuses
that control the SRK key revocation information. This is used to Revoke
compromised SRK keys.
To use ahab_commit, the boot container must be built with an SRK
revocation bit mask that is not 0x0. For the SPSDK provided by NXP, this
means setting the 'srk_revoke_mask' option in the config file used to
sign the boot container. The 'ahab_commit 0x10' can then be used to commit
the SRK revocation information into the SECO fuses.
Signed-off-by: John Ripple <john.ripple@keysight.com>
Include functions to use the system controller to read the device tree
overlays which supports auto update functionality.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The MediaTek MT7987/MT7988 SoCs features a built-in 2.5Gb PHY
connected to GMAC1. The PHY supports 10/100/1000/2500 Mbps
full-duplex only.
The PHY requires one or two firmware files. Firmware for MT7988 has
already been added to upstream: mediatek/mt7988/i2p5ge-phy-pmb.bin.
MT7987 has two firmware files which will be add to upstream later:
i2p5ge-phy-pmb.bin and i2p5ge-phy-DSPBitTb.bin.
Environment variable can be set for firmware data loading:
mt7987_i2p5ge_load_pmb_firmware for i2p5ge-phy-pmb.bin
mt7987_i2p5ge_load_dspbit_firmware for i2p5ge-phy-DSPBitTb.bin
mt7988_i2p5ge_load_pmb_firmware for i2p5ge-phy-pmb.bin
This driver allows dedicated weak functions to be overridden by
board to provide the firmware data:
mt7987_i2p5ge_get_fw() for MT7987
mt7988_i2p5ge_get_fw() for MT7988
To enable the PHY, add the following not to device tree:
ð1 {
status = "okay";
phy-mode = "xgmii";
phy-handle = <&phy15>;
phy15: ethernet-phy@15 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <15>;
phy-mode = "xgmii";
};
};
Signed-off-by: Sky Huang <SkyLake.Huang@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
It's important to return the actual firmware data size as some
firmware files may have no checksum and need the size as the only
way for firmware validation check.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Initialize the actread variable to prevent undefined behavior
that can occur if the variable is used before being assigned a
value.
This will help to prevent potential issues, especially if
actread is used (e.g., read, incremented, or returned) before
being explicitly set elsewhere in the code.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
This commit introduces a new API,
request_firmware_into_buf_via_script(), to the fs_loader framework.
This function allows firmware to be loaded into memory using
a user-defined U-Boot script, providing greater flexibility for
firmware loading scenarios that cannot be handled by static file
paths or device/partition selection alone.
Key features:
- The API runs a specified U-Boot script (by name), which is responsible
for loading the firmware into memory by any means (e.g., load from MMC, USB, network, etc.).
- The script must set two environment variables: 'fw_addr'
(the memory address where the firmware is loaded) and
'fw_size' (the size of the firmware in bytes).
- The function validates these variables, copies the firmware into a newly
allocated buffer (using memdup), and returns the pointer
via the provided double pointer argument.
- The maximum allowed firmware size is checked to prevent buffer overflows.
- The environment variables are cleared after use to avoid stale data.
- Detailed error messages are provided for all failure conditions to aid debugging.
Usage example:
1. Define a U-Boot script in the environment that loads the firmware
and sets the required variables:
=> env set my_fw_script 'load mmc 0:1 ${loadaddr} firmware.bin &&
env set fw_addr ${loadaddr} && env set fw_size ${filesize}'
2. In your code, call the new API:
void *fw_buf = NULL;
int ret = request_firmware_into_buf_via_script(&fw_buf, 0x46000000, "my_fw_script");
if (ret < 0)
return ret;
This approach allows board integrators and users to customize the firmware
loading process without modifying the source code,
simply by changing the script in the U-Boot environment.
Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[trini: Fix printf of size_t needing to use %zx]
Signed-off-by: Tom Rini <trini@konsulko.com>
If there is an unhandled KCS/BPC pending interrupt after reboot,
the KCS/BPC Linux driver may trigger interrupts immediately upon
registering the irq. However, since the driver is not yet initialized
to handle them, this can lead to unexpected behavior.
To prevent this, disable KCS/BPC interrupts in u-boot to avoid pending
interrupts from being raised before the Linux driver is fully initialized.
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Enabling an eSPI channel(e.g. Peripheral Channel) during
an eSPI transaction might cause the BMC eSPI module to
transition to a wrong state and therefore respond with
FATAL_ERROR on incoming transaction.
Add workaround to avoid the module getting into the wrong
state.
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
This driver provides an interface to access the functions of the system
controller on the Microchip PolarFire SoC.
This driver includes functions to use the system controller to read
the device serial number.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
In sc_seco_secvio_dgo_config there is a check for data being NULL but
this occurs after data has already been dereferenced. All callers of the
function provide a valid pointer for data so no need for the NULL check.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
In socfpga_dtreg_probe it is possible that if mask is 0 then reg will
not be assigned to before first use. Refactor the code slightly to
ensure that reg is always assigned to and remove a piece of duplicated
code.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Add a driver for the BIST module that support triggering of both PBIST
(Memory BIST) and LBIST (Logic BIST) tests. Also expose the relevant
operations and functions that would be required for an end user to
trigger the tests.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
As no platforms use this driver anymore and it's not been converted from
to DM_I2C for use, remove it.
Fixes: ed7fe2bee12a ("ppc: Remove xpedite boards")
Signed-off-by: Tom Rini <trini@konsulko.com>
This driver has not been converted to DM_I2C and the last platform that
used it was removed as well. Remove the driver.
Fixes: 4bbcec08ebec ("arm: Remove mx6dlarm2 board")
Signed-off-by: Tom Rini <trini@konsulko.com>
This driver requires that the gdsys legacy driver option also be enabled
in order to build. Express that requirement in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
The options related to FSL_SEC_MON are part of the chain of trust
related options and should be under that menu, so move it there.
Furthermore we don't need to prompt for the driver itself but do need to
allow for configuration of the monitor endianess.
Signed-off-by: Tom Rini <trini@konsulko.com>
