mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-05-05 04:36:13 +02:00
board: adi: Add support for SC589 boards
This adds support for the Analog Devices SC589-EZKIT and SC589-mini. Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com> Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com> Signed-off-by: Philip Molloy <philip.molloy@analog.com> Signed-off-by: Greg Malysa <malysagreg@gmail.com>
This commit is contained in:
Greg Malysa
Tom Rini
parent
34d41f8da6
commit
e382cb2be4
@ -8,6 +8,204 @@
|
||||
#include "sc58x.dtsi"
|
||||
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
model = "ADI SC589-EZKIT";
|
||||
compatible = "adi,sc589-ezkit", "adi,sc58x";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio_expander1: mcp23017@21 {
|
||||
compatible = "microchip,mcp23017";
|
||||
reg = <0x21>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
bootph-pre-ram;
|
||||
|
||||
eeprom {
|
||||
gpio-hog;
|
||||
gpios = <0 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "eeprom-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
uart0-flow-en {
|
||||
gpio-hog;
|
||||
gpios = <1 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "uart0-flow-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
uart0-en {
|
||||
gpio-hog;
|
||||
gpios = <2 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "uart0-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
eth0 {
|
||||
gpio-hog;
|
||||
gpios = <3 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "eth0-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
eth1 {
|
||||
gpio-hog;
|
||||
gpios = <4 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "eth1-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
mlb {
|
||||
gpio-hog;
|
||||
gpios = <5 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "mlb-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
can0 {
|
||||
gpio-hog;
|
||||
gpios = <6 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "can0-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
can1 {
|
||||
gpio-hog;
|
||||
gpios = <7 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "can1-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
adau1962 {
|
||||
gpio-hog;
|
||||
gpios = <8 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "adau1962-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
adau1979 {
|
||||
gpio-hog;
|
||||
gpios = <9 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "adau1979-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
sd_wp {
|
||||
gpio-hog;
|
||||
gpios = <11 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "sd-wp-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
spi2d2-d3 {
|
||||
gpio-hog;
|
||||
gpios = <12 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "spi2d2-d3-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
spi2flash-cs {
|
||||
gpio-hog;
|
||||
gpios = <13 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "spi2flash-cs";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
spdif-opt {
|
||||
gpio-hog;
|
||||
gpios = <14 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "spdif-optical-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
spdif-dig {
|
||||
gpio-hog;
|
||||
gpios = <15 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "spdif-digital-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_expander2: mcp23017@22 {
|
||||
compatible = "microchip,mcp23017";
|
||||
reg = <0x22>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
bootph-pre-ram;
|
||||
|
||||
pushbutton1 {
|
||||
gpio-hog;
|
||||
gpios = <0 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "pushbutton1-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
pushbutton2 {
|
||||
gpio-hog;
|
||||
gpios = <1 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "pushbutton2-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
led10 {
|
||||
gpio-hog;
|
||||
gpios = <2 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "led10-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
led11 {
|
||||
gpio-hog;
|
||||
gpios = <3 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "led11-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
|
||||
led12 {
|
||||
gpio-hog;
|
||||
gpios = <4 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "led12-en";
|
||||
bootph-pre-ram;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
snps,reset-gpio = <&gpio0 ADI_ADSP_PIN('B', 14) GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
emac0_phy_pwdn {
|
||||
gpio-hog;
|
||||
output-high;
|
||||
gpios = <ADI_ADSP_PIN('C', 15) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -8,6 +8,22 @@
|
||||
#include "sc58x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ADI SC598-MINI";
|
||||
model = "ADI SC589-MINI";
|
||||
compatible = "adi,sc589-mini", "adi,sc58x";
|
||||
};
|
||||
|
||||
ð0 {
|
||||
snps,reset-gpio = <&gpio0 ADI_ADSP_PIN('B', 7) GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
emac0_phy_pwdn {
|
||||
gpio-hog;
|
||||
output-high;
|
||||
gpios = <ADI_ADSP_PIN('F', 6) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -6,18 +6,176 @@
|
||||
#include "sc5xx.dtsi"
|
||||
|
||||
/ {
|
||||
gic: interrupt-controller@310b2000 {
|
||||
compatible = "arm,cortex-a5-gic";
|
||||
gic: interrupt-controller@310B2000 {
|
||||
compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
|
||||
#interrupt-cells = <3>;
|
||||
#address-cells = <0>;
|
||||
interrupt-controller;
|
||||
reg = <0x310B2000 0x1000>,
|
||||
<0x310B4000 0x100>;
|
||||
};
|
||||
|
||||
soc {
|
||||
rcu: rcu@0x3108B000 {
|
||||
compatible = "adi,reset-controller";
|
||||
reg = <0x3108B000 0x1000>;
|
||||
adi,sharc-min = <1>;
|
||||
adi,sharc-max = <2>;
|
||||
adi,enable-reboot;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mmc: mmc0@31010000 {
|
||||
compatible = "snps,dw-mshc";
|
||||
reg = <0x31010000 0x400>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc_default>;
|
||||
bus-width = <4>;
|
||||
fifo-depth = <128>;
|
||||
clock-names = "biu", "ciu";
|
||||
max-frequency = <52000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb0: musb@310c1000 {
|
||||
compatible = "adi,sc5xx-musb";
|
||||
reg = <0x310c1000 0x390>;
|
||||
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "mc", "dma";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb1: musb@310c2000 {
|
||||
compatible = "adi,sc5xx-musb";
|
||||
reg = <0x310c2000 0x390>;
|
||||
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "mc", "dma";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sharc1: sharc@0x28240000 {
|
||||
compatible = "adi,sc5xx-rproc";
|
||||
reg = <0x28240000 0x100>;
|
||||
coreid = <1>;
|
||||
adi,rcu = <&rcu>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sharc2: sharc@0x28a40000 {
|
||||
compatible = "adi,sc5xx-rproc";
|
||||
reg = <0x28a40000 0x100>;
|
||||
coreid = <2>;
|
||||
adi,rcu = <&rcu>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&timer0 {
|
||||
reg = <0x31001004 0x100>,
|
||||
<0x31001060 0x100>;
|
||||
<0x31001060 0x100>;
|
||||
clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
&pinctrl0 {
|
||||
mmc_default: mmc_pins {
|
||||
bootph-pre-ram;
|
||||
adi,pins = <ADI_ADSP_PIN('F', 2) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('F', 3) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('F', 4) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('F', 5) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('F', 10) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('F', 11) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('F', 12) ADI_ADSP_PINFUNC_ALT0>;
|
||||
};
|
||||
|
||||
eth0_default: eth0_pins {
|
||||
adi,pins = <ADI_ADSP_PIN('A', 0) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 1) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 2) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 3) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 4) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 5) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 6) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 7) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 8) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 9) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 10) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 11) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 12) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('A', 13) ADI_ADSP_PINFUNC_ALT0>;
|
||||
};
|
||||
|
||||
uart0_default: uart0_pins {
|
||||
bootph-pre-ram;
|
||||
adi,pins = <ADI_ADSP_PIN('C', 13) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('C', 14) ADI_ADSP_PINFUNC_ALT0>;
|
||||
};
|
||||
|
||||
spi2_default: spi2_pins {
|
||||
adi,pins = <ADI_ADSP_PIN('C', 1) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('C', 2) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('C', 3) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('C', 4) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('C', 5) ADI_ADSP_PINFUNC_ALT0>,
|
||||
<ADI_ADSP_PIN('C', 6) ADI_ADSP_PINFUNC_ALT0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl0 {
|
||||
adi,npins = <102>;
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
adi,ngpios = <102>;
|
||||
};
|
||||
|
||||
&clk {
|
||||
compatible = "adi,sc58x-clocks";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK1>;
|
||||
reg = <0x31044000 0x1000>;
|
||||
|
||||
flash1: is25lp512@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor", "is25lp512";
|
||||
reg = <1>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-max-frequency = <10000000>;
|
||||
bootph-pre-ram;
|
||||
};
|
||||
};
|
||||
|
||||
&wdog {
|
||||
clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
ð0 {
|
||||
reg = <0x3100C000 0x1000>;
|
||||
};
|
||||
|
||||
&mmc {
|
||||
clocks = <&dummy>, <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
|
||||
};
|
||||
|
||||
6
board/adi/sc589-ezkit/Makefile
Normal file
6
board/adi/sc589-ezkit/Makefile
Normal file
@ -0,0 +1,6 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#
|
||||
# (C) Copyright 2025 - Analog Devices, Inc.
|
||||
#
|
||||
|
||||
obj-y := sc589-ezkit.o
|
||||
21
board/adi/sc589-ezkit/sc589-ezkit.c
Normal file
21
board/adi/sc589-ezkit/sc589-ezkit.c
Normal file
@ -0,0 +1,21 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* (C) Copyright 2025 - Analog Devices, Inc.
|
||||
*/
|
||||
|
||||
#include <phy.h>
|
||||
#include <asm/u-boot.h>
|
||||
#include <asm/arch-adi/sc5xx/sc5xx.h>
|
||||
#include <asm/arch-adi/sc5xx/soc.h>
|
||||
|
||||
int board_phy_config(struct phy_device *phydev)
|
||||
{
|
||||
fixup_dp83867_phy(phydev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
sc5xx_enable_rgmii();
|
||||
return 0;
|
||||
}
|
||||
@ -1,13 +1,17 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0-or-later+ */
|
||||
|
||||
/*
|
||||
* (C) Copyright 2024 - Analog Devices, Inc.
|
||||
*/
|
||||
|
||||
#include <env/adi/adi_boot.env>
|
||||
|
||||
adi_stage2_offset=0x20000
|
||||
adi_image_offset=0xE0000
|
||||
adi_rfs_offset=0x6E0000
|
||||
loadaddr=0xC3000000
|
||||
adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
|
||||
adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
|
||||
adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
|
||||
jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-ezkit.jffs2
|
||||
loadaddr=CONFIG_SC5XX_LOADADDR
|
||||
|
||||
#define USE_NFS
|
||||
#define USE_RAM
|
||||
#define USE_MMC
|
||||
#define USE_SPI
|
||||
|
||||
#include <env/adi/adi_boot.env>
|
||||
|
||||
6
board/adi/sc589-mini/Makefile
Normal file
6
board/adi/sc589-mini/Makefile
Normal file
@ -0,0 +1,6 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#
|
||||
# (C) Copyright 2025 - Analog Devices, Inc.
|
||||
#
|
||||
|
||||
obj-y := sc589-mini.o
|
||||
21
board/adi/sc589-mini/sc589-mini.c
Normal file
21
board/adi/sc589-mini/sc589-mini.c
Normal file
@ -0,0 +1,21 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* (C) Copyright 2025 - Analog Devices, Inc.
|
||||
*/
|
||||
|
||||
#include <phy.h>
|
||||
#include <asm/u-boot.h>
|
||||
#include <asm/arch-adi/sc5xx/sc5xx.h>
|
||||
#include <asm/arch-adi/sc5xx/soc.h>
|
||||
|
||||
int board_phy_config(struct phy_device *phydev)
|
||||
{
|
||||
fixup_dp83867_phy(phydev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
sc5xx_enable_rgmii();
|
||||
return 0;
|
||||
}
|
||||
@ -1,13 +1,17 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0-or-later+ */
|
||||
|
||||
/*
|
||||
* (C) Copyright 2024 - Analog Devices, Inc.
|
||||
*/
|
||||
|
||||
#include <env/adi/adi_boot.env>
|
||||
|
||||
adi_stage2_offset=0x20000
|
||||
adi_image_offset=0xE0000
|
||||
adi_rfs_offset=0x8E0000
|
||||
loadaddr=0xC3000000
|
||||
adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
|
||||
adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
|
||||
adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
|
||||
jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-mini.jffs2
|
||||
loadaddr=CONFIG_SC5XX_LOADADDR
|
||||
|
||||
#define USE_NFS
|
||||
#define USE_RAM
|
||||
#define USE_SPI
|
||||
#define USE_MMC
|
||||
|
||||
#include <env/adi/adi_boot.env>
|
||||
|
||||
101
configs/sc589-ezkit_defconfig
Normal file
101
configs/sc589-ezkit_defconfig
Normal file
@ -0,0 +1,101 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SYS_ARM_CACHE_WRITETHROUGH=y
|
||||
CONFIG_ARCH_SC5XX=y
|
||||
CONFIG_SYS_MALLOC_LEN=0x100000
|
||||
CONFIG_SPL_GPIO=y
|
||||
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xC203F000
|
||||
CONFIG_SF_DEFAULT_SPEED=1000000
|
||||
CONFIG_ENV_SIZE=0x4000
|
||||
CONFIG_ENV_OFFSET=0xD0000
|
||||
CONFIG_ENV_SECT_SIZE=0x4000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL_STACK=0x200C0000
|
||||
CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
|
||||
CONFIG_SPL_BSS_START_ADDR=0x200A0000
|
||||
CONFIG_SPL_BSS_MAX_SIZE=0x8000
|
||||
CONFIG_SC58X=y
|
||||
CONFIG_TARGET_SC589_EZKIT=y
|
||||
CONFIG_SC5XX_UBOOT_OFFSET=0x20000
|
||||
CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
|
||||
CONFIG_SC5XX_ROOTFS_OFFSET=0x6E0000
|
||||
CONFIG_SC5XX_LOADADDR=0xC3000000
|
||||
CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
|
||||
CONFIG_ADI_USE_DMC1=y
|
||||
CONFIG_CGU0_CLKOUTSEL=7
|
||||
# CONFIG_EFI_LOADER is not set
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_SIGNATURE=y
|
||||
CONFIG_LEGACY_IMAGE_FORMAT=y
|
||||
CONFIG_USE_BOOTCOMMAND=y
|
||||
CONFIG_BOOTCOMMAND="run ramboot"
|
||||
CONFIG_SYS_CBSIZE=512
|
||||
CONFIG_CYCLIC_MAX_CPU_TIME_US=1000
|
||||
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
CONFIG_SPL_I2C=y
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
# CONFIG_BOOTM_NETBSD is not set
|
||||
# CONFIG_BOOTM_PLAN9 is not set
|
||||
# CONFIG_BOOTM_RTEMS is not set
|
||||
# CONFIG_BOOTM_VXWORKS is not set
|
||||
# CONFIG_CMD_ELF is not set
|
||||
CONFIG_CMD_DM=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
# CONFIG_CMD_PINMUX is not set
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_SYS_DISABLE_AUTOLOAD=y
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_DNS=y
|
||||
CONFIG_CMD_MII=y
|
||||
# CONFIG_CMD_MDIO is not set
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_EMBED=y
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_ENV_SPI_MAX_HZ=10000000
|
||||
CONFIG_USE_HOSTNAME=y
|
||||
CONFIG_HOSTNAME="sc589-ezkit"
|
||||
CONFIG_NET_RETRY_COUNT=20
|
||||
CONFIG_IP_DEFRAG=y
|
||||
CONFIG_SPL_CLK=y
|
||||
CONFIG_SPL_CLK_CCF=y
|
||||
CONFIG_GPIO_HOG=y
|
||||
CONFIG_SPL_GPIO_HOG=y
|
||||
CONFIG_DM_GPIO_LOOKUP_LABEL=y
|
||||
CONFIG_SPL_DM_GPIO_LOOKUP_LABEL=y
|
||||
CONFIG_MCP230XX_GPIO=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_DM_I2C_GPIO=y
|
||||
CONFIG_SYS_I2C_ADI=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_SNPS=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_WINBOND=y
|
||||
CONFIG_ETH_DESIGNWARE=y
|
||||
CONFIG_DW_ALTDESCRIPTOR=y
|
||||
CONFIG_PINCTRL=y
|
||||
# CONFIG_PINCTRL_GENERIC is not set
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
# CONFIG_SPL_PINCTRL_GENERIC is not set
|
||||
CONFIG_SPECIFY_CONSOLE_INDEX=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
CONFIG_ADI_SPI3=y
|
||||
CONFIG_SPL_TIMER=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_MUSB_HOST=y
|
||||
CONFIG_USB_MUSB_SC5XX=y
|
||||
CONFIG_USB_MUSB_PIO_ONLY=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_FAT_WRITE=y
|
||||
# CONFIG_REGEX is not set
|
||||
# CONFIG_SPL_CRC8 is not set
|
||||
97
configs/sc589-mini_defconfig
Normal file
97
configs/sc589-mini_defconfig
Normal file
@ -0,0 +1,97 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SYS_ARM_CACHE_WRITETHROUGH=y
|
||||
CONFIG_ARCH_SC5XX=y
|
||||
CONFIG_SYS_MALLOC_LEN=0x100000
|
||||
CONFIG_SPL_GPIO=y
|
||||
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xC203F000
|
||||
CONFIG_ENV_SIZE=0x10000
|
||||
CONFIG_ENV_OFFSET=0xD0000
|
||||
CONFIG_ENV_SECT_SIZE=0x10000
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_SPL_STACK=0x200C0000
|
||||
CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
|
||||
CONFIG_SPL_BSS_START_ADDR=0x200A0000
|
||||
CONFIG_SPL_BSS_MAX_SIZE=0x8000
|
||||
CONFIG_SC58X=y
|
||||
CONFIG_TARGET_SC589_MINI=y
|
||||
CONFIG_SC5XX_UBOOT_OFFSET=0x20000
|
||||
CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
|
||||
CONFIG_SC5XX_ROOTFS_OFFSET=0x8E0000
|
||||
CONFIG_SC5XX_LOADADDR=0xC3000000
|
||||
CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
|
||||
CONFIG_ADI_USE_DMC1=y
|
||||
# CONFIG_EFI_LOADER is not set
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_SIGNATURE=y
|
||||
CONFIG_LEGACY_IMAGE_FORMAT=y
|
||||
CONFIG_USE_BOOTCOMMAND=y
|
||||
CONFIG_BOOTCOMMAND="run ramboot"
|
||||
CONFIG_SYS_CBSIZE=512
|
||||
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
CONFIG_SPL_I2C=y
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
# CONFIG_BOOTM_NETBSD is not set
|
||||
# CONFIG_BOOTM_PLAN9 is not set
|
||||
# CONFIG_BOOTM_RTEMS is not set
|
||||
# CONFIG_BOOTM_VXWORKS is not set
|
||||
# CONFIG_CMD_ELF is not set
|
||||
CONFIG_CMD_DM=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
# CONFIG_CMD_PINMUX is not set
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_SYS_DISABLE_AUTOLOAD=y
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_DNS=y
|
||||
CONFIG_CMD_MII=y
|
||||
# CONFIG_CMD_MDIO is not set
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_FS_GENERIC=y
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_EMBED=y
|
||||
CONFIG_ENV_OVERWRITE=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_ENV_SPI_MAX_HZ=10000000
|
||||
CONFIG_USE_HOSTNAME=y
|
||||
CONFIG_HOSTNAME="sc589-mini"
|
||||
CONFIG_NET_RETRY_COUNT=20
|
||||
CONFIG_IP_DEFRAG=y
|
||||
CONFIG_SPL_CLK=y
|
||||
CONFIG_SPL_CLK_CCF=y
|
||||
CONFIG_GPIO_HOG=y
|
||||
CONFIG_SPL_GPIO_HOG=y
|
||||
CONFIG_DM_GPIO_LOOKUP_LABEL=y
|
||||
CONFIG_SPL_DM_GPIO_LOOKUP_LABEL=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_DM_I2C_GPIO=y
|
||||
CONFIG_SYS_I2C_ADI=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_SNPS=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_ISSI=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_ETH_DESIGNWARE=y
|
||||
CONFIG_DW_ALTDESCRIPTOR=y
|
||||
CONFIG_PINCTRL=y
|
||||
# CONFIG_PINCTRL_GENERIC is not set
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
# CONFIG_SPL_PINCTRL_GENERIC is not set
|
||||
CONFIG_SPECIFY_CONSOLE_INDEX=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
CONFIG_ADI_SPI3=y
|
||||
CONFIG_SPL_TIMER=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_MUSB_HOST=y
|
||||
CONFIG_USB_MUSB_SC5XX=y
|
||||
CONFIG_USB_MUSB_PIO_ONLY=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_FAT_WRITE=y
|
||||
# CONFIG_REGEX is not set
|
||||
Loading…
x
Reference in New Issue
Block a user