From 1727e216987a2d4e3e220f8c09e4bb54a611d21e Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Mon, 27 Sep 2010 15:43:52 +0900 Subject: [PATCH 001/116] s5p_mmc: support 8-bit bus width This Patch do support 8-bit bus width for s5p So we add parameter for bus_width (in s5p_mmc_init(), s5p_mmc_initialize()) If want to use 8-bit bus width, only change (0, 8) instead of (0, 4). Signed-off-by: Jaehoon Chung Signed-off-by: Minkyu Kang Signed-off-by: Kyungmin Park --- arch/arm/include/asm/arch-s5pc1xx/mmc.h | 2 +- board/samsung/goni/goni.c | 2 +- drivers/mmc/s5p_mmc.c | 19 ++++++++++++++----- 3 files changed, 16 insertions(+), 7 deletions(-) diff --git a/arch/arm/include/asm/arch-s5pc1xx/mmc.h b/arch/arm/include/asm/arch-s5pc1xx/mmc.h index 68c59d13e34..48de64d9c35 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/mmc.h +++ b/arch/arm/include/asm/arch-s5pc1xx/mmc.h @@ -65,7 +65,7 @@ struct mmc_host { unsigned int clock; /* Current clock (MHz) */ }; -int s5p_mmc_init(int dev_index); +int s5p_mmc_init(int dev_index, int bus_width); #endif /* __ASSEMBLY__ */ #endif diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index 43367291132..0b09ebaf898 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -87,6 +87,6 @@ int board_mmc_init(bd_t *bis) gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X); } - return s5p_mmc_init(0); + return s5p_mmc_init(0, 4); } #endif diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c index 1fd425cbb67..195b5be39ea 100644 --- a/drivers/mmc/s5p_mmc.c +++ b/drivers/mmc/s5p_mmc.c @@ -352,11 +352,16 @@ static void mmc_set_ios(struct mmc *mmc) ctrl = readb(&host->reg->hostctl); /* + * WIDE8[5] + * 0 = Depend on WIDE4 + * 1 = 8-bit mode * WIDE4[1] * 1 = 4-bit mode * 0 = 1-bit mode */ - if (mmc->bus_width == 4) + if (mmc->bus_width == 8) + ctrl |= (1 << 5); + else if (mmc->bus_width == 4) ctrl |= (1 << 1); else ctrl &= ~(1 << 1); @@ -437,7 +442,7 @@ static int mmc_core_init(struct mmc *mmc) return 0; } -static int s5p_mmc_initialize(int dev_index) +static int s5p_mmc_initialize(int dev_index, int bus_width) { struct mmc *mmc; @@ -450,7 +455,11 @@ static int s5p_mmc_initialize(int dev_index) mmc->init = mmc_core_init; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; - mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS; + if (bus_width == 8) + mmc->host_caps = MMC_MODE_8BIT; + else + mmc->host_caps = MMC_MODE_4BIT; + mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; mmc->f_min = 400000; mmc->f_max = 52000000; @@ -462,7 +471,7 @@ static int s5p_mmc_initialize(int dev_index) return 0; } -int s5p_mmc_init(int dev_index) +int s5p_mmc_init(int dev_index, int bus_width) { - return s5p_mmc_initialize(dev_index); + return s5p_mmc_initialize(dev_index, bus_width); } From 1628cfc4fe4b2c3caa7e9d5622f0665c54e8ba6e Mon Sep 17 00:00:00 2001 From: Minkyu Kang Date: Tue, 28 Sep 2010 14:35:02 +0900 Subject: [PATCH 002/116] ARMV7: S5P: serial: support the s5pc210 This patch is for s5pc210 support. Due to the resigter of baudrate is changed from slot to value, add both of them to uart structure. Signed-off-by: Minkyu Kang Signed-off-by: Kyungmin Park --- arch/arm/include/asm/arch-s5pc1xx/uart.h | 14 +++++++++++--- drivers/serial/serial_s5p.c | 6 +++++- 2 files changed, 16 insertions(+), 4 deletions(-) diff --git a/arch/arm/include/asm/arch-s5pc1xx/uart.h b/arch/arm/include/asm/arch-s5pc1xx/uart.h index 2d7ad7ec987..f6eeab45cdc 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/uart.h +++ b/arch/arm/include/asm/arch-s5pc1xx/uart.h @@ -24,6 +24,12 @@ #define __ASM_ARCH_UART_H_ #ifndef __ASSEMBLY__ +/* baudrate rest value */ +union br_rest { + unsigned short slot; /* udivslot */ + unsigned char value; /* ufracval */ +}; + struct s5p_uart { unsigned int ulcon; unsigned int ucon; @@ -38,10 +44,12 @@ struct s5p_uart { unsigned char urxh; unsigned char res2[3]; unsigned int ubrdiv; - unsigned short udivslot; - unsigned char res3[2]; - unsigned char res4[0x3d0]; + union br_rest rest; + unsigned char res3[0x3d0]; }; + +static int use_divslot = 1; + #endif /* __ASSEMBLY__ */ #endif diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index 77096643f1f..36333c3d49a 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -70,7 +70,11 @@ void serial_setbrg_dev(const int dev_index) val = uclk / baudrate; writel(val / 16 - 1, &uart->ubrdiv); - writew(udivslot[val % 16], &uart->udivslot); + + if (use_divslot) + writew(udivslot[val % 16], &uart->rest.slot); + else + writeb(val % 16, &uart->rest.value); } /* From 6b0ccc3b456bcec534620aac93427e4a2207a66a Mon Sep 17 00:00:00 2001 From: Heiko Schocher <[hs@denx.de]> Date: Wed, 20 Oct 2010 19:33:26 +0530 Subject: [PATCH 003/116] arm926ejs, suen3: fix relocation issues - use internal 2k security SRAM as RAM for early stack. - do early inits in board_init_f() Signed-off-by: Heiko Schocher Cc: Prafulla Wadaskar --- board/keymile/km_arm/km_arm.c | 24 +++++++++++++++--------- include/configs/km_arm.h | 6 ++++-- 2 files changed, 19 insertions(+), 11 deletions(-) diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 7c0b8588873..a2a8bfeeb4a 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -143,7 +143,7 @@ int misc_init_r(void) return 0; } -int board_init(void) +int board_early_init_f(void) { u32 tmp; @@ -160,14 +160,6 @@ int board_init(void) writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE + 4); printf("KM: setting NAND mode\n"); - /* - * arch number of board - */ - gd->bd->bi_arch_number = MACH_TYPE_SUEN3; - - /* address of boot parameters */ - gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; - #if defined(CONFIG_SOFT_I2C) /* init the GPIO for I2C Bitbang driver */ kw_gpio_set_valid(SUEN3_SDA_PIN, 1); @@ -179,6 +171,20 @@ int board_init(void) kw_gpio_set_valid(SUEN3_ENV_WP, 38); kw_gpio_direction_output(SUEN3_ENV_WP, 1); #endif + + return 0; +} + +int board_init(void) +{ + /* + * arch number of board + */ + gd->bd->bi_arch_number = MACH_TYPE_SUEN3; + + /* address of boot parameters */ + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; + return 0; } diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h index faa0f503266..4b706f1f447 100644 --- a/include/configs/km_arm.h +++ b/include/configs/km_arm.h @@ -182,6 +182,8 @@ int get_scl (void); /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_INIT_SP_ADDR (0x00000000 + 0x1000 - /* Fix this */ \ - CONFIG_SYS_GBL_DATA_SIZE) +/* Kirkwood has 2k of Security SRAM, use it for SP */ +#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 +/* Do early setups now in board_init_f() */ +#define CONFIG_BOARD_EARLY_INIT_F #endif /* _CONFIG_KM_ARM_H */ From 754ae3fbb76dc429ef932bbd04b432196efe45ff Mon Sep 17 00:00:00 2001 From: Prafulla Wadaskar Date: Wed, 20 Oct 2010 20:12:27 +0530 Subject: [PATCH 004/116] Kirkwood: bugfix: broken early console messages It has been observed that, the complete u-boot banner does not appear on the console when the system is booted from NAND/NOR/SPI flash. This patch fixes this issue on all Marvell boards by adding board_early_init_f() support Signed-off-by: Prafulla Wadaskar --- board/Marvell/guruplug/guruplug.c | 6 +++++- board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 6 +++++- board/Marvell/openrd_base/openrd_base.c | 6 +++++- board/Marvell/rd6281a/rd6281a.c | 6 +++++- board/Marvell/sheevaplug/sheevaplug.c | 6 +++++- include/configs/mv-common.h | 1 + 6 files changed, 26 insertions(+), 5 deletions(-) diff --git a/board/Marvell/guruplug/guruplug.c b/board/Marvell/guruplug/guruplug.c index 4df4e9b2604..1f0e67a7fe7 100644 --- a/board/Marvell/guruplug/guruplug.c +++ b/board/Marvell/guruplug/guruplug.c @@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR; -int board_init(void) +int board_early_init_f(void) { /* * default gpio configuration @@ -96,7 +96,11 @@ int board_init(void) 0 }; kirkwood_mpp_conf(kwmpp_config); + return 0; +} +int board_init(void) +{ /* * arch number of board */ diff --git a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c index 93d1400be49..80fd20b7f4b 100644 --- a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c +++ b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c @@ -32,7 +32,7 @@ DECLARE_GLOBAL_DATA_PTR; -int board_init(void) +int board_early_init_f(void) { /* * default gpio configuration @@ -98,7 +98,11 @@ int board_init(void) 0 }; kirkwood_mpp_conf(kwmpp_config); + return 0; +} +int board_init(void) +{ /* * arch number of board */ diff --git a/board/Marvell/openrd_base/openrd_base.c b/board/Marvell/openrd_base/openrd_base.c index d006b2ddf7d..10109c1322a 100644 --- a/board/Marvell/openrd_base/openrd_base.c +++ b/board/Marvell/openrd_base/openrd_base.c @@ -35,7 +35,7 @@ DECLARE_GLOBAL_DATA_PTR; -int board_init(void) +int board_early_init_f(void) { /* * default gpio configuration @@ -102,7 +102,11 @@ int board_init(void) }; kirkwood_mpp_conf(kwmpp_config); + return 0; +} +int board_init(void) +{ /* * arch number of board */ diff --git a/board/Marvell/rd6281a/rd6281a.c b/board/Marvell/rd6281a/rd6281a.c index 0d76146b658..e69e035308b 100644 --- a/board/Marvell/rd6281a/rd6281a.c +++ b/board/Marvell/rd6281a/rd6281a.c @@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; -int board_init(void) +int board_early_init_f(void) { /* * default gpio configuration @@ -97,7 +97,11 @@ int board_init(void) 0 }; kirkwood_mpp_conf(kwmpp_config); + return 0; +} +int board_init(void) +{ /* * arch number of board */ diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c index 173a7b809df..d7dc80c1ba2 100644 --- a/board/Marvell/sheevaplug/sheevaplug.c +++ b/board/Marvell/sheevaplug/sheevaplug.c @@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR; -int board_init(void) +int board_early_init_f(void) { /* * default gpio configuration @@ -96,7 +96,11 @@ int board_init(void) 0 }; kirkwood_mpp_conf(kwmpp_config); + return 0; +} +int board_init(void) +{ /* * arch number of board */ diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index bdcebd3b5de..2b19a34bb28 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -142,6 +142,7 @@ #define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ +#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ #define CONFIG_NR_DRAM_BANKS 4 #define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ From 0284816e985ab8509371170f39501da0cdee75e4 Mon Sep 17 00:00:00 2001 From: Macpaul Lin Date: Tue, 19 Oct 2010 20:14:36 +0800 Subject: [PATCH 005/116] ftrtc010.c : enhance code according to original datasheet Add missing codes according to original datasheet. This patch also makes ftrtc010 could be adapted to PCLK and EXT_CLK. Signed-off-by: Macpaul Lin --- drivers/rtc/ftrtc010.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/rtc/ftrtc010.c b/drivers/rtc/ftrtc010.c index 7738a7acaa0..25e4a7bcdb8 100644 --- a/drivers/rtc/ftrtc010.c +++ b/drivers/rtc/ftrtc010.c @@ -34,6 +34,13 @@ struct ftrtc010 { unsigned int alarm_hour; /* 0x18 */ unsigned int record; /* 0x1c */ unsigned int cr; /* 0x20 */ + unsigned int wsec; /* 0x24 */ + unsigned int wmin; /* 0x28 */ + unsigned int whour; /* 0x2c */ + unsigned int wday; /* 0x30 */ + unsigned int intr; /* 0x34 */ + unsigned int div; /* 0x38 */ + unsigned int rev; /* 0x3c */ }; /* @@ -85,7 +92,11 @@ int rtc_get(struct rtc_time *tmp) debug("%s(): record register: %x\n", __func__, readl(&rtc->record)); +#ifdef CONFIG_FTRTC010_PCLK + now = (ftrtc010_time() + readl(&rtc->record)) / RTC_DIV_COUNT; +#else /* CONFIG_FTRTC010_EXTCLK */ now = ftrtc010_time() + readl(&rtc->record); +#endif to_tm(now, tmp); From 7a8ddeea5ed0b80fc83b6ae57ef3e98fc69a92da Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 20 Oct 2010 08:31:45 +0200 Subject: [PATCH 006/116] MPC52xx, motionpro: update default configuration Signed-off-by: Wolfgang Denk --- include/configs/motionpro.h | 74 +++++++++++++++---------------------- 1 file changed, 29 insertions(+), 45 deletions(-) diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 935b5b9a052..f7493f56be7 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -47,29 +47,27 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #include #define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_MII #define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII #define CONFIG_CMD_NET #define CONFIG_CMD_PING -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DATE -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_DTT - +#define CONFIG_CMD_REGINFO /* * Serial console configuration @@ -79,7 +77,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - /* * Ethernet configuration */ @@ -101,11 +98,14 @@ #define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ "press \"\" to stop\n", bootdelay +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + #define CONFIG_ETHADDR 00:50:C2:40:10:00 #define CONFIG_OVERWRITE_ETHADDR_ONCE 1 #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - /* * Default environment settings */ @@ -117,21 +117,22 @@ "serverip=192.168.1.1\0" \ "gatewayip=192.168.1.1\0" \ "console=ttyPSC0,115200\0" \ - "u-boot_addr=100000\0" \ - "kernel_addr=200000\0" \ - "fdt_addr=400000\0" \ - "ramdisk_addr=500000\0" \ + "u-boot_addr=400000\0" \ + "kernel_addr=400000\0" \ + "fdt_addr=700000\0" \ + "ramdisk_addr=800000\0" \ "multi_image_addr=800000\0" \ - "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ - "u-boot=/tftpboot/motionpro/u-boot.bin\0" \ - "bootfile=/tftpboot/motionpro/uImage\0" \ - "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \ - "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "u-boot=motionpro/u-boot.bin\0" \ + "bootfile=motionpro/uImage\0" \ + "fdt_file=motionpro/motionpro.dtb\0" \ + "ramdisk_file=motionpro/uRamdisk\0" \ "multi_image_file=kernel+initrd+dtb.img\0" \ "load=tftp ${u-boot_addr} ${u-boot}\0" \ - "update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \ + "update=prot off fff00000 +${filesize};" \ + "era fff00000 +${filesize}; " \ "cp.b ${u-boot_addr} fff00000 ${filesize};" \ - "prot on fff00000 fff3ffff\0" \ + "prot on fff00000 +${filesize}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ @@ -160,24 +161,20 @@ */ #define CONFIG_BOARD_EARLY_INIT_R 1 - /* * Low level configuration */ - /* * Clock configuration: SYS_XTALIN = 33MHz */ #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 - /* * Set IPB speed to 100MHz */ #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK - /* * Memory map */ @@ -186,7 +183,7 @@ * Setting MBAR to otherwise will cause system hang when using SmartDMA such * as network commands. */ -#define CONFIG_SYS_MBAR 0xf0000000 +#define CONFIG_SYS_MBAR 0xf0000000 #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* @@ -218,7 +215,6 @@ #define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ - /* * Chip selects configuration */ @@ -251,7 +247,6 @@ #define CONFIG_SYS_CS_BURST 0x00000000 #define CONFIG_SYS_CS_DEADCYCLE 0x22222222 - /* * SDRAM configuration */ @@ -261,7 +256,6 @@ #define SDRAM_CONTROL 0x504f0000 #define SDRAM_MODE 0x00cd0000 - /* * Flash configuration */ @@ -299,7 +293,6 @@ #define CONFIG_SYS_ATA_STRIDE 4 #define CONFIG_DOS_PARTITION - /* * I2C configuration */ @@ -308,7 +301,6 @@ #define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ #define CONFIG_SYS_I2C_SLAVE 0x7F - /* * EEPROM configuration */ @@ -317,14 +309,12 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* 2ms/cycle + 3ms extra */ #define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* 2 EEPROMs (addr:50,52) */ - /* * RTC configuration */ #define CONFIG_RTC_DS1337 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 - /* * Status LED configuration */ @@ -346,14 +336,12 @@ extern void __led_toggle(led_id_t id); extern void __led_set(led_id_t id, int state); #endif /* __ASSEMBLY__ */ - /* * Temperature sensor */ #define CONFIG_DTT_LM75 1 #define CONFIG_DTT_SENSORS { 0x49 } - /* * Environment settings */ @@ -381,13 +369,11 @@ extern void __led_set(led_id_t id, int state); */ #define CONFIG_SYS_GPS_PORT_CONFIG 0x1105a004 - /* * Motion-PRO's CPLD revision control register */ #define CPLD_REV_REGISTER (CONFIG_SYS_CS2_START + 0x06) - /* * Miscellaneous configurable options */ @@ -406,7 +392,6 @@ extern void __led_set(led_id_t id, int state); #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Various low-level settings */ @@ -415,7 +400,6 @@ extern void __led_set(led_id_t id, int state); #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ - /* Not needed for MPC 5xxx U-Boot, but used by tools/updater */ #define CONFIG_SYS_RESET_ADDRESS 0xfff00100 From c62491d2602b353a815a909e27eec0df9f2c06a2 Mon Sep 17 00:00:00 2001 From: John Schmoller Date: Wed, 29 Sep 2010 14:05:44 -0500 Subject: [PATCH 007/116] ppc: Don't initialize write protected NOR flashes If a NOR flash is write protected it can not be initialized/detected so add the ability for boards to skip NOR initialization on bootup. A board can skip NOR initialization by implementing the board_flash_wp_on() function. Signed-off-by: John Schmoller Signed-off-by: Peter Tyser CC: sr@denx.de Acked-by: Stefan Roese --- arch/powerpc/lib/board.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index c0c7fd4f6ee..2e0749da0a5 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -175,6 +175,16 @@ void __board_add_ram_info(int use_default) } void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info"))); +int __board_flash_wp_on(void) +{ + /* + * Most flashes can't be detected when write protection is enabled, + * so provide a way to let U-Boot gracefully ignore write protected + * devices. + */ + return 0; +} +int board_flash_wp_on(void) __attribute__((weak, alias("__board_flash_wp_on"))); static int init_func_ram (void) { @@ -698,7 +708,11 @@ void board_init_r (gd_t *id, ulong dest_addr) #if !defined(CONFIG_SYS_NO_FLASH) puts ("FLASH: "); - if ((flash_size = flash_init ()) > 0) { + if (board_flash_wp_on()) { + printf("Uninitialized - Write Protect On\n"); + /* Since WP is on, we can't find real size. Set to 0 */ + flash_size = 0; + } else if ((flash_size = flash_init ()) > 0) { # ifdef CONFIG_SYS_FLASH_CHECKSUM print_size (flash_size, ""); /* From cf2c87d3223901e329241f241c3402c6186e0d98 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 28 Sep 2010 12:14:57 +0900 Subject: [PATCH 008/116] sh: Add support load and boot of Initrd. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Nobuhiro Iwamatsu --- arch/sh/lib/bootm.c | 66 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 65 insertions(+), 1 deletion(-) diff --git a/arch/sh/lib/bootm.c b/arch/sh/lib/bootm.c index 9c58ed7ec8c..019e8ec172a 100644 --- a/arch/sh/lib/bootm.c +++ b/arch/sh/lib/bootm.c @@ -43,6 +43,41 @@ static void hexdump(unsigned char *buf, int len) } #endif +#define MOUNT_ROOT_RDONLY 0x000 +#define RAMDISK_FLAGS 0x004 +#define ORIG_ROOT_DEV 0x008 +#define LOADER_TYPE 0x00c +#define INITRD_START 0x010 +#define INITRD_SIZE 0x014 +#define COMMAND_LINE 0x100 + +#define RD_PROMPT (1<<15) +#define RD_DOLOAD (1<<14) +#define CMD_ARG_RD_PROMPT "prompt_ramdisk=" +#define CMD_ARG_RD_DOLOAD "load_ramdisk=" + +#ifdef CONFIG_SH_SDRAM_OFFSET +#define GET_INITRD_START(initrd, linux) (initrd - linux + CONFIG_SH_SDRAM_OFFSET) +#else +#define GET_INITRD_START(initrd, linux) (initrd - linux) +#endif + +static void set_sh_linux_param(unsigned long param_addr, unsigned long data) +{ + *(unsigned long *)(param_addr) = data; +} + +static unsigned long sh_check_cmd_arg(char *cmdline, char *key, int base) +{ + unsigned long val = 0; + char *p = strstr(cmdline, key); + if (p) { + p += strlen(key); + val = simple_strtol(p, NULL, base); + } + return val; +} + int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { /* Linux kernel load address */ @@ -51,7 +86,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima unsigned char *param = (unsigned char *)image_get_load(images->legacy_hdr_os); /* Linux kernel command line */ - char *cmdline = (char *)param + 0x100; + char *cmdline = (char *)param + COMMAND_LINE; /* PAGE_SIZE */ unsigned long size = images->ep - (unsigned long)param; char *bootargs = getenv("bootargs"); @@ -61,8 +96,37 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima /* Setup parameters */ memset(param, 0, size); /* Clear zero page */ + + /* Set commandline */ strcpy(cmdline, bootargs); + sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10); + /* Initrd */ + if (images->rd_start || images->rd_end) { + unsigned long ramdisk_flags; + int val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_PROMPT, 10); + if (val == 1) + ramdisk_flags |= RD_PROMPT; + else + ramdisk_flags &= ~RD_PROMPT; + + val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10); + if (val == 1) + ramdisk_flags |= RD_DOLOAD; + else + ramdisk_flags &= ~RD_DOLOAD; + + set_sh_linux_param((unsigned long)param + MOUNT_ROOT_RDONLY, 0x0001); + set_sh_linux_param((unsigned long)param + RAMDISK_FLAGS, ramdisk_flags); + set_sh_linux_param((unsigned long)param + ORIG_ROOT_DEV, 0x0200); + set_sh_linux_param((unsigned long)param + LOADER_TYPE, 0x0001); + set_sh_linux_param((unsigned long)param + INITRD_START, + GET_INITRD_START(images->rd_start, CONFIG_SYS_SDRAM_BASE)); + set_sh_linux_param((unsigned long)param + INITRD_SIZE, + images->rd_end - images->rd_start); + } + + /* Boot kernel */ kernel(); /* does not return */ From 915d6b7d2b7af0bb28ed4c5aceb92ba64fe86fa8 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 5 Oct 2010 16:58:05 +0900 Subject: [PATCH 009/116] sh: sh7785lcr: Add CONFIG_SH_SDRAM_OFFSET Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Nobuhiro Iwamatsu --- include/configs/sh7785lcr.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index 2c18e2f7fdf..6627f99ce30 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -62,8 +62,10 @@ /* MEMORY */ #if defined(CONFIG_SH_32BIT) -#define SH7785LCR_SDRAM_PHYS_BASE (0x48000000) -#define SH7785LCR_SDRAM_BASE (0x88000000) +/* 0x40000000 - 0x47FFFFFF does not use */ +#define CONFIG_SH_SDRAM_OFFSET (0x8000000) +#define SH7785LCR_SDRAM_PHYS_BASE (0x40000000 + CONFIG_SH_SDRAM_OFFSET) +#define SH7785LCR_SDRAM_BASE (0x80000000 + CONFIG_SH_SDRAM_OFFSET) #define SH7785LCR_SDRAM_SIZE (384 * 1024 * 1024) #define SH7785LCR_FLASH_BASE_1 (0xa0000000) #define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024) From 006442b35211472d325ee3955566cfb0d079e5b0 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 19 Oct 2010 17:07:07 +0900 Subject: [PATCH 010/116] sh: Rename TEXT_BASE to CONFIG_SYS_TEXT_BASE Signed-off-by: Nobuhiro Iwamatsu --- arch/sh/config.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/config.mk b/arch/sh/config.mk index 07ba68f1987..415c9497984 100644 --- a/arch/sh/config.mk +++ b/arch/sh/config.mk @@ -29,6 +29,6 @@ STANDALONE_LOAD_ADDR += -EB endif PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__ -PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE) +PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(CONFIG_SYS_TEXT_BASE) LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds From de03f8bc4a3f7bbb09bccbf2e3a5f14b45d5ad64 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 19 Oct 2010 17:14:15 +0900 Subject: [PATCH 011/116] sh: Fix warning about uninitialized value of ramdisk_flags Signed-off-by: Nobuhiro Iwamatsu --- arch/sh/lib/bootm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/lib/bootm.c b/arch/sh/lib/bootm.c index 019e8ec172a..f38d0b0e8e3 100644 --- a/arch/sh/lib/bootm.c +++ b/arch/sh/lib/bootm.c @@ -103,7 +103,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10); /* Initrd */ if (images->rd_start || images->rd_end) { - unsigned long ramdisk_flags; + unsigned long ramdisk_flags = 0; int val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_PROMPT, 10); if (val == 1) ramdisk_flags |= RD_PROMPT; From 41f2747b9a3c2324e5e6b6fc52a29671426f89d9 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 20 Oct 2010 01:17:08 +0900 Subject: [PATCH 012/116] sh: sh7785lcr: Add CONFIG_SYS_TEXT_BASE for 32bit mode Signed-off-by: Nobuhiro Iwamatsu --- board/renesas/sh7785lcr/config.mk | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/board/renesas/sh7785lcr/config.mk b/board/renesas/sh7785lcr/config.mk index 1a9038c7533..6853d2b28be 100644 --- a/board/renesas/sh7785lcr/config.mk +++ b/board/renesas/sh7785lcr/config.mk @@ -24,6 +24,8 @@ # sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp -ifndef CONFIG_SYS_TEXT_BASE +ifdef CONFIG_SH_32BIT +CONFIG_SYS_TEXT_BASE = 0x8FF80000 +else CONFIG_SYS_TEXT_BASE = 0x0ff80000 endif From e0f0e527f8290bdf72d0fb5e5937c6b943879bf8 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 20 Oct 2010 01:22:25 +0900 Subject: [PATCH 013/116] sh: rsk7203: Move to boards.cfg Move the rsk7203 target out of the Makefile and into boards.cfg. And fix sh2 of MAKEALL. Signed-off-by: Nobuhiro Iwamatsu --- MAKEALL | 5 ++--- Makefile | 8 -------- boards.cfg | 1 + 3 files changed, 3 insertions(+), 11 deletions(-) diff --git a/MAKEALL b/MAKEALL index 51312dd5e3c..a97061c8690 100755 --- a/MAKEALL +++ b/MAKEALL @@ -609,9 +609,8 @@ LIST_blackfin="$(boards_by_arch blackfin) ## SH Systems ######################################################################### -LIST_sh2=" \ - rsk7203 \ -" +LIST_sh2="$(boards_by_cpu sh2)" + LIST_sh3=" \ mpr2 \ ms7720se \ diff --git a/Makefile b/Makefile index 06c71a2db86..205e7108667 100644 --- a/Makefile +++ b/Makefile @@ -1188,14 +1188,6 @@ bf527-ezkit-v2_config : unconfig # SH3 (SuperH) #======================================================================== -######################################################################### -## sh2 (Renesas SuperH) -######################################################################### -rsk7203_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh2 rsk7203 renesas - ######################################################################### ## sh3 (Renesas SuperH) ######################################################################### diff --git a/boards.cfg b/boards.cfg index 0f3292fd390..2599c2ac8c9 100644 --- a/boards.cfg +++ b/boards.cfg @@ -732,5 +732,6 @@ davinci_dm6467evm arm arm926ejs dm6467evm davinci davinci davinci_schmoogie arm arm926ejs schmoogie davinci davinci davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci bf527-ad7160-eval blackfin blackfin +rsk7203 sh sh2 rsk7203 renesas - # Target ARCH CPU Board name Vendor SoC Options ############################################################################################### From 3771c69d78cd1acbfd8c530fbd3b153487cdf70c Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 20 Oct 2010 01:28:29 +0900 Subject: [PATCH 014/116] sh: sh3: Move to boards.cfg Move the sh3 target boards out of the Makefile and into boards.cfg. And fix sh3 of MAKEALL. Signed-off-by: Nobuhiro Iwamatsu --- MAKEALL | 6 +----- Makefile | 14 -------------- boards.cfg | 2 ++ 3 files changed, 3 insertions(+), 19 deletions(-) diff --git a/MAKEALL b/MAKEALL index a97061c8690..71dcba29947 100755 --- a/MAKEALL +++ b/MAKEALL @@ -610,11 +610,7 @@ LIST_blackfin="$(boards_by_arch blackfin) ######################################################################### LIST_sh2="$(boards_by_cpu sh2)" - -LIST_sh3=" \ - mpr2 \ - ms7720se \ -" +LIST_sh3="$(boards_by_cpu sh3)" LIST_sh4=" \ ms7750se \ diff --git a/Makefile b/Makefile index 205e7108667..3083c22de6c 100644 --- a/Makefile +++ b/Makefile @@ -1188,20 +1188,6 @@ bf527-ezkit-v2_config : unconfig # SH3 (SuperH) #======================================================================== -######################################################################### -## sh3 (Renesas SuperH) -######################################################################### - -mpr2_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh3 mpr2 - -ms7720se_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh3 ms7720se - ######################################################################### ## sh4 (Renesas SuperH) ######################################################################### diff --git a/boards.cfg b/boards.cfg index 2599c2ac8c9..1dc557ef299 100644 --- a/boards.cfg +++ b/boards.cfg @@ -733,5 +733,7 @@ davinci_schmoogie arm arm926ejs schmoogie davinci davinci davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci bf527-ad7160-eval blackfin blackfin rsk7203 sh sh2 rsk7203 renesas - +mpr2 sh sh3 mpr2 - - +ms7720se sh sh3 ms7720se - - # Target ARCH CPU Board name Vendor SoC Options ############################################################################################### From 03626be3f4533c9875e919bd58c1dfdb73d7f6f0 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 20 Oct 2010 01:35:28 +0900 Subject: [PATCH 015/116] sh: sh4: Move to boards.cfg Move the sh4 target boards out of the Makefile and into boards.cfg. And fix sh4 of MAKEALL. Signed-off-by: Nobuhiro Iwamatsu --- MAKEALL | 19 ++--------------- Makefile | 60 ------------------------------------------------------ boards.cfg | 10 +++++++++ 3 files changed, 12 insertions(+), 77 deletions(-) diff --git a/MAKEALL b/MAKEALL index 71dcba29947..4ae741a6956 100755 --- a/MAKEALL +++ b/MAKEALL @@ -611,24 +611,9 @@ LIST_blackfin="$(boards_by_arch blackfin) LIST_sh2="$(boards_by_cpu sh2)" LIST_sh3="$(boards_by_cpu sh3)" +LIST_sh4="$(boards_by_cpu sh4)" -LIST_sh4=" \ - ms7750se \ - ms7722se \ - MigoR \ - r7780mp \ - r2dplus \ - sh7763rdp \ - sh7785lcr \ - ap325rxa \ - espt \ -" - -LIST_sh=" \ - ${LIST_sh2} \ - ${LIST_sh3} \ - ${LIST_sh4} \ -" +LIST_sh="$(boards_by_arch sh)" ######################################################################### ## SPARC Systems diff --git a/Makefile b/Makefile index 3083c22de6c..f8e13d782ad 100644 --- a/Makefile +++ b/Makefile @@ -1184,66 +1184,6 @@ bf527-ezkit-v2_config : unconfig @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \ bf527-ezkit blackfin blackfin bf527-ezkit -#======================================================================== -# SH3 (SuperH) -#======================================================================== - -######################################################################### -## sh4 (Renesas SuperH) -######################################################################### - -MigoR_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 MigoR renesas - -ms7750se_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 ms7750se - -ms7722se_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 ms7722se - -r2dplus_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 r2dplus renesas - -r7780mp_config: unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 r7780mp renesas - -sh7763rdp_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 sh7763rdp renesas - -sh7785lcr_32bit_config \ -sh7785lcr_config : unconfig - @mkdir -p $(obj)include - @mkdir -p $(obj)board/renesas/sh7785lcr - @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h - @if [ "$(findstring 32bit, $@)" ] ; then \ - echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ - echo "CONFIG_SYS_TEXT_BASE = 0x8ff80000" > \ - $(obj)board/renesas/sh7785lcr/config.tmp ; \ - fi - @$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas - -ap325rxa_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 ap325rxa renesas - -espt_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h - @$(MKCONFIG) -a $@ sh sh4 espt - ######################################################################### ######################################################################### diff --git a/boards.cfg b/boards.cfg index 1dc557ef299..b7017374753 100644 --- a/boards.cfg +++ b/boards.cfg @@ -735,5 +735,15 @@ bf527-ad7160-eval blackfin blackfin rsk7203 sh sh2 rsk7203 renesas - mpr2 sh sh3 mpr2 - - ms7720se sh sh3 ms7720se - - +MigoRsh sh4 MigoR renesas - +ms7750se sh sh4 ms7750se - - +ms7722se sh sh4 ms7722se - - +r2dplus sh sh4 r2dplus renesas - +r7780mp sh sh4 r7780mp renesas - +sh7763rdp sh sh4 sh7763rdp renesas - +sh7785lcr sh sh4 sh7785lcr renesas - +sh7785lcr_32bit sh sh4 sh7785lcr renesas - sh7785lcr:SH_32BIT=1 +ap325rxa sh sh4 ap325rxa renesas - +espt sh sh4 espt - - # Target ARCH CPU Board name Vendor SoC Options ############################################################################################### From fff6ec382c139eb242bd85356e66a0bc43becb63 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Thu, 21 Oct 2010 18:30:35 +0200 Subject: [PATCH 016/116] Fix building for 83xx boards with USB support Commit 29c6fbe0471afd7ffa41fcb2103eec5b53294897 broke building for 83xx boards with USB support: ehci-fsl.c: In function 'ehci_hcd_init': ehci-fsl.c:43: error: 'CONFIG_SYS_FSL_USB_ADDR' undeclared (first use in this function) ehci-fsl.c:43: error: (Each undeclared identifier is reported only once ehci-fsl.c:43: error: for each function it appears in.) make[1]: *** [ehci-fsl.o] Error 1 Signed-off-by: Anatolij Gustschin --- include/usb/ehci-fsl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h index 08691a0f2a1..67600ed5228 100644 --- a/include/usb/ehci-fsl.h +++ b/include/usb/ehci-fsl.h @@ -161,7 +161,7 @@ #define MPC83XX_SCCR_USB_DRCM_01 0x00100000 #define MPC83XX_SCCR_USB_DRCM_10 0x00200000 -#if defined(CONFIG_MPC83XX) +#if defined(CONFIG_MPC83xx) #define CONFIG_SYS_FSL_USB_ADDR CONFIG_SYS_MPC83xx_USB_ADDR #elif defined(CONFIG_MPC85xx) #define CONFIG_SYS_FSL_USB_ADDR CONFIG_SYS_MPC85xx_USB_ADDR From 7ae549926acf7778e7a439191d2d8117c9e9e1c9 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Thu, 21 Oct 2010 17:20:09 +0200 Subject: [PATCH 017/116] a4m072: changes to the default environment The default values for 'addip' and 'norargs' changed per customer request. Everything else cleaned up to fit into 80 symbol line. Signed-off-by: Ilya Yanok --- include/configs/a4m072.h | 58 +++++++++++++++++++++++++--------------- 1 file changed, 37 insertions(+), 21 deletions(-) diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index 24a04ebefb5..a24b304e639 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -147,27 +147,43 @@ #define CONFIG_PREBOOT "run try_update" #define CONFIG_EXTRA_ENV_SETTINGS \ - "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \ - "cf1=diskboot 200000 0:1\0" \ - "bootcmd_cf1=run bcf1\0" \ - "bcf=setenv bootargs root=/dev/hda3\0" \ - "bootcmd_nfs=run bnfs\0" \ - "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs\0" \ - "bootcmd_nor=cp.b ${kernel_addr} 200000 100000; run norargs addip; run bk\0" \ - "bnfs=nfs 200000 ${rootpath}/boot/uImage ; run nfsargs addip ; run bk\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \ - "try_update=usb start;sleep 2;usb start;sleep 1;fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;source 2F0000\0" \ - "env_addr=FE060000\0" \ - "kernel_addr=FE100000\0" \ - "rootfs_addr=FE200000\0" \ - "add_mtd=setenv bootargs ${bootargs} mtdparts=phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \ - "bcf1=run cf1; run bcf; run addip; run bk\0" \ - "add_consolespec=setenv bootargs ${bootargs} console=/dev/null quiet\0" \ - "addip=if test \"${ethaddr}\" != \"00:00:00:00:00:00\" ; then if test -n ${ipaddr}; then setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off panic=1; fi ; fi\0" \ - "hostname=CPUP0\0" \ - "ethaddr=00:00:00:00:00:00\0" \ - "netdev=eth0\0" \ - "bootcmd=run bootcmd_nor\0" \ + "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \ + "cf1=diskboot 200000 0:1\0" \ + "bootcmd_cf1=run bcf1\0" \ + "bcf=setenv bootargs root=/dev/hda3\0" \ + "bootcmd_nfs=run bnfs\0" \ + "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs "\ + "panic=1\0" \ + "bootcmd_nor=cp.b ${kernel_addr} 200000 100000;" \ + "run norargs addip; run bk\0" \ + "bnfs=nfs 200000 ${rootpath}/boot/uImage;" \ + "run nfsargs addip ; run bk\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "try_update=usb start;sleep 2;usb start;sleep 1;" \ + "fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;" \ + "source 2F0000\0" \ + "env_addr=FE060000\0" \ + "kernel_addr=FE100000\0" \ + "rootfs_addr=FE200000\0" \ + "add_mtd=setenv bootargs ${bootargs} mtdparts=" \ + "phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \ + "bcf1=run cf1; run bcf; run addip; run bk\0" \ + "add_consolespec=setenv bootargs ${bootargs} " \ + "console=/dev/null quiet\0" \ + "addip=if test -n ${ethaddr};" \ + "then if test -n ${ipaddr};" \ + "then setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:"\ + "${netmask}:${hostname}:${netdev}:off;" \ + "fi;" \ + "else;" \ + "setenv bootargs ${bootargs} no_ethaddr;" \ + "fi\0" \ + "hostname=CPUP0\0" \ + "ethaddr=00:00:00:00:00:00\0" \ + "netdev=eth0\0" \ + "bootcmd=run bootcmd_nor\0" \ "" /* * IPB Bus clocking configuration. From 8f54dd4f13ce2a2d71bb820c0adcfc1db36d6671 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Thu, 21 Oct 2010 17:20:10 +0200 Subject: [PATCH 018/116] a4m072: change 'display' command implementation This patch changes implementation of 'display' command for a4m072 that uses 7-segment LED display as customer requested: a) The "display" command shall _not_ turn on the decimal point. b) Exception: "display ." shall turn on (only) the decimal point. c) Hex digits (0-9, A-F, a-f) shall be displayed as usual. d) Letters U, P, Y, L, S, T, H shall be displayed as usual (lower case letters identical to upper case letters) e) 'I' (and 'i') shall be displayed like '1' f) 'O' (and 'o') shall be displayed like '0' g) all other Characters shall be displayed like ' ' (all segments off). Signed-off-by: Ilya Yanok --- board/a4m072/a4m072.c | 62 ++++++++++++++++--------------------------- 1 file changed, 23 insertions(+), 39 deletions(-) diff --git a/board/a4m072/a4m072.c b/board/a4m072/a4m072.c index ae7ccbb4e9d..09a5a5183bf 100644 --- a/board/a4m072/a4m072.c +++ b/board/a4m072/a4m072.c @@ -270,8 +270,6 @@ static u8 display_buf[DISPLAY_BUF_SIZE]; static u8 display_putc_pos; static u8 display_out_pos; -static u8 display_dot_enable; - void display_set(int cmd) { if (cmd & DISPLAY_CLEAR) { @@ -281,12 +279,6 @@ void display_set(int cmd) { if (cmd & DISPLAY_HOME) { display_putc_pos = 0; } - - if (cmd & DISPLAY_MARK) { - display_dot_enable = 1; - } else { - display_dot_enable = 0; - } } #define SEG_A (1<<0) @@ -314,10 +306,12 @@ void display_set(int cmd) { * A..Z index 10..35 * - index 36 * _ index 37 + * . index 38 */ #define SYMBOL_DASH (36) #define SYMBOL_UNDERLINE (37) +#define SYMBOL_DOT (38) static u8 display_char2seg7_tbl[]= { @@ -337,28 +331,29 @@ static u8 display_char2seg7_tbl[]= SEG_B | SEG_C | SEG_D | SEG_E | SEG_G, /* d */ SEG_A | SEG_D | SEG_E | SEG_F | SEG_G, /* E */ SEG_A | SEG_E | SEG_F | SEG_G, /* F */ - SEG_A | SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* g */ + 0, /* g - not displayed */ SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* H */ - SEG_E | SEG_F, /* I */ - SEG_B | SEG_C | SEG_D | SEG_E, /* J */ - SEG_A, /* K - special 1 */ + SEG_B | SEG_C, /* I */ + 0, /* J - not displayed */ + 0, /* K - not displayed */ SEG_D | SEG_E | SEG_F, /* L */ - SEG_B, /* m - special 2 */ - SEG_C | SEG_E | SEG_G, /* n */ - SEG_C | SEG_D | SEG_E | SEG_G, /* o */ + 0, /* m - not displayed */ + 0, /* n - not displayed */ + SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* O */ SEG_A | SEG_B | SEG_E | SEG_F | SEG_G, /* P */ - SEG_A | SEG_B | SEG_C | SEG_F | SEG_G, /* q */ - SEG_E | SEG_G, /* r */ + 0, /* q - not displayed */ + 0, /* r - not displayed */ SEG_A | SEG_C | SEG_D | SEG_F | SEG_G, /* S */ SEG_D | SEG_E | SEG_F | SEG_G, /* t */ SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* U */ - SEG_C | SEG_D | SEG_E | SEG_F, /* V */ - SEG_C, /* w - special 3 */ - SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* X */ + 0, /* V - not displayed */ + 0, /* w - not displayed */ + 0, /* X - not displayed */ SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* Y */ - SEG_A | SEG_B | SEG_D | SEG_E | SEG_G, /* Z */ + 0, /* Z - not displayed */ SEG_G, /* - */ - SEG_D /* _ */ + SEG_D, /* _ */ + SEG_P /* . */ }; /* Convert char to the LED segments representation */ @@ -374,23 +369,20 @@ static u8 display_char2seg7(char c) c -= 'A' - 10; else if (c == '-') c = SYMBOL_DASH; - else if ((c == '_') || (c == '.')) + else if (c == '_') c = SYMBOL_UNDERLINE; + else if (c == '.') + c = SYMBOL_DOT; else c = ' '; /* display unsupported symbols as space */ if (c != ' ') val = display_char2seg7_tbl[(int)c]; - /* Handle DP LED here */ - if (display_dot_enable) { - val |= SEG_P; - } - return val; } -static inline int display_putc_nomark(char c) +int display_putc(char c) { if (display_putc_pos >= DISPLAY_BUF_SIZE) return -1; @@ -403,13 +395,6 @@ static inline int display_putc_nomark(char c) return c; } -int display_putc(char c) -{ - /* Mark the codes from the "display" command with the DP LED */ - display_set(DISPLAY_MARK); - return display_putc_nomark(c); -} - /* * Flush current symbol to the LED display hardware */ @@ -493,9 +478,8 @@ void show_boot_progress(int status) if (a4m072_status2code(status, buf) < 0) return; - display_set(0); /* Clear DP Led */ - display_putc_nomark(buf[0]); - display_putc_nomark(buf[1]); + display_putc(buf[0]); + display_putc(buf[1]); display_set(DISPLAY_HOME); display_out_pos = 0; /* reset output position */ From e03e4b7312f0da424550e6b06f1964332aac1c09 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Thu, 21 Oct 2010 17:20:11 +0200 Subject: [PATCH 019/116] led_display: remove unused DISPLAY_MARK define DISPLAY_MARK subcommand of display_set() is not used anywhere so we can remove it safely. Signed-off-by: Ilya Yanok --- doc/README.LED_display | 1 - include/led-display.h | 1 - 2 files changed, 2 deletions(-) diff --git a/doc/README.LED_display b/doc/README.LED_display index 521746e1291..19977ea7e0d 100644 --- a/doc/README.LED_display +++ b/doc/README.LED_display @@ -14,7 +14,6 @@ This function should control the state of the LED display. Argument is an ORed combination of the following values: DISPLAY_CLEAR -- clear the display DISPLAY_HOME -- set the position to the beginning of display - DISPLAY_MARK -- enable mark (decimal point), if implemented int display_putc(char c); diff --git a/include/led-display.h b/include/led-display.h index 41c37443452..eaa0f406406 100644 --- a/include/led-display.h +++ b/include/led-display.h @@ -29,7 +29,6 @@ /* Display Commands */ #define DISPLAY_CLEAR 0x1 /* Clear the display */ #define DISPLAY_HOME 0x2 /* Set cursor at home position */ -#define DISPLAY_MARK 0x4 /* Enable the decimal point led, if implemented */ void display_set(int cmd); int display_putc(char c); From bf90ecd3c366177c55012e68d15b8aeb2c41e907 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Wed, 13 Oct 2010 12:14:29 +0200 Subject: [PATCH 020/116] Add linux framebuffer header include/linux/fb.h [port of linux 2.6.34 commit 6a9ee8af344e3bd7dbd61e67037096cdf7f83289] Signed-off-by: Stefano Babic --- include/linux/fb.h | 616 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 616 insertions(+) create mode 100644 include/linux/fb.h diff --git a/include/linux/fb.h b/include/linux/fb.h new file mode 100644 index 00000000000..f4ac4bf90e8 --- /dev/null +++ b/include/linux/fb.h @@ -0,0 +1,616 @@ +#ifndef _LINUX_FB_H +#define _LINUX_FB_H + +#include + +/* Definitions of frame buffers */ + +#define FB_MAX 32 /* sufficient for now */ + +#define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */ + +#define FB_VISUAL_MONO01 0 /* Monochr. 1=Black 0=White */ +#define FB_VISUAL_MONO10 1 /* Monochr. 1=White 0=Black */ +#define FB_VISUAL_TRUECOLOR 2 /* True color */ +#define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */ +#define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */ +#define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */ + +#define FB_ACCEL_NONE 0 /* no hardware accelerator */ + +struct fb_fix_screeninfo { + char id[16]; /* identification string eg "TT Builtin" */ + unsigned long smem_start; /* Start of frame buffer mem */ + /* (physical address) */ + __u32 smem_len; /* Length of frame buffer mem */ + __u32 type; /* see FB_TYPE_* */ + __u32 type_aux; /* Interleave for interleaved Planes */ + __u32 visual; /* see FB_VISUAL_* */ + __u16 xpanstep; /* zero if no hardware panning */ + __u16 ypanstep; /* zero if no hardware panning */ + __u16 ywrapstep; /* zero if no hardware ywrap */ + __u32 line_length; /* length of a line in bytes */ + unsigned long mmio_start; /* Start of Memory Mapped I/O */ + /* (physical address) */ + __u32 mmio_len; /* Length of Memory Mapped I/O */ + __u32 accel; /* Indicate to driver which */ + /* specific chip/card we have */ + __u16 reserved[3]; /* Reserved for future compatibility */ +}; + +/* + * Interpretation of offset for color fields: All offsets are from the right, + * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you + * can use the offset as right argument to <<). A pixel afterwards is a bit + * stream and is written to video memory as that unmodified. + * + * For pseudocolor: offset and length should be the same for all color + * components. Offset specifies the position of the least significant bit + * of the pallette index in a pixel value. Length indicates the number + * of available palette entries (i.e. # of entries = 1 << length). + */ +struct fb_bitfield { + __u32 offset; /* beginning of bitfield */ + __u32 length; /* length of bitfield */ + __u32 msb_right; + +}; + +#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */ +#define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */ + +#define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/ +#define FB_ACTIVATE_NXTOPEN 1 /* activate on next open */ +#define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */ +#define FB_ACTIVATE_MASK 15 + /* values */ +#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */ +#define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */ +#define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */ +#define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/ +#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */ + +#define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */ +#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */ +#define FB_SYNC_EXT 4 /* external sync */ +#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */ +#define FB_SYNC_BROADCAST 16 /* broadcast video timings */ + /* vtotal = 144d/288n/576i => PAL */ + /* vtotal = 121d/242n/484i => NTSC */ +#define FB_SYNC_ON_GREEN 32 /* sync on green */ + +#define FB_VMODE_NONINTERLACED 0 /* non interlaced */ +#define FB_VMODE_INTERLACED 1 /* interlaced */ +#define FB_VMODE_DOUBLE 2 /* double scan */ +#define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */ +#define FB_VMODE_MASK 255 + +#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */ +#define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */ +#define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */ + +/* + * Display rotation support + */ +#define FB_ROTATE_UR 0 +#define FB_ROTATE_CW 1 +#define FB_ROTATE_UD 2 +#define FB_ROTATE_CCW 3 + +#define PICOS2KHZ(a) (1000000000UL/(a)) +#define KHZ2PICOS(a) (1000000000UL/(a)) + +struct fb_var_screeninfo { + __u32 xres; /* visible resolution */ + __u32 yres; + __u32 xres_virtual; /* virtual resolution */ + __u32 yres_virtual; + __u32 xoffset; /* offset from virtual to visible */ + __u32 yoffset; /* resolution */ + + __u32 bits_per_pixel; /* guess what */ + __u32 grayscale; /* != 0 Graylevels instead of colors */ + + struct fb_bitfield red; /* bitfield in fb mem if true color, */ + struct fb_bitfield green; /* else only length is significant */ + struct fb_bitfield blue; + struct fb_bitfield transp; /* transparency */ + + __u32 nonstd; /* != 0 Non standard pixel format */ + + __u32 activate; /* see FB_ACTIVATE_* */ + + __u32 height; /* height of picture in mm */ + __u32 width; /* width of picture in mm */ + + __u32 accel_flags; /* (OBSOLETE) see fb_info.flags */ + + /* Timing: All values in pixclocks, except pixclock (of course) */ + __u32 pixclock; /* pixel clock in ps (pico seconds) */ + __u32 left_margin; /* time from sync to picture */ + __u32 right_margin; /* time from picture to sync */ + __u32 upper_margin; /* time from sync to picture */ + __u32 lower_margin; + __u32 hsync_len; /* length of horizontal sync */ + __u32 vsync_len; /* length of vertical sync */ + __u32 sync; /* see FB_SYNC_* */ + __u32 vmode; /* see FB_VMODE_* */ + __u32 rotate; /* angle we rotate counter clockwise */ + __u32 reserved[5]; /* Reserved for future compatibility */ +}; + +struct fb_cmap { + __u32 start; /* First entry */ + __u32 len; /* Number of entries */ + __u16 *red; /* Red values */ + __u16 *green; + __u16 *blue; + __u16 *transp; /* transparency, can be NULL */ +}; + +struct fb_con2fbmap { + __u32 console; + __u32 framebuffer; +}; + +/* VESA Blanking Levels */ +#define VESA_NO_BLANKING 0 +#define VESA_VSYNC_SUSPEND 1 +#define VESA_HSYNC_SUSPEND 2 +#define VESA_POWERDOWN 3 + + +enum { + /* screen: unblanked, hsync: on, vsync: on */ + FB_BLANK_UNBLANK = VESA_NO_BLANKING, + + /* screen: blanked, hsync: on, vsync: on */ + FB_BLANK_NORMAL = VESA_NO_BLANKING + 1, + + /* screen: blanked, hsync: on, vsync: off */ + FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1, + + /* screen: blanked, hsync: off, vsync: on */ + FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1, + + /* screen: blanked, hsync: off, vsync: off */ + FB_BLANK_POWERDOWN = VESA_POWERDOWN + 1 +}; + +#define FB_VBLANK_VBLANKING 0x001 /* currently in a vertical blank */ +#define FB_VBLANK_HBLANKING 0x002 /* currently in a horizontal blank */ +#define FB_VBLANK_HAVE_VBLANK 0x004 /* vertical blanks can be detected */ +#define FB_VBLANK_HAVE_HBLANK 0x008 /* horizontal blanks can be detected */ +#define FB_VBLANK_HAVE_COUNT 0x010 /* global retrace counter is available */ +#define FB_VBLANK_HAVE_VCOUNT 0x020 /* the vcount field is valid */ +#define FB_VBLANK_HAVE_HCOUNT 0x040 /* the hcount field is valid */ +#define FB_VBLANK_VSYNCING 0x080 /* currently in a vsync */ +#define FB_VBLANK_HAVE_VSYNC 0x100 /* verical syncs can be detected */ + +struct fb_vblank { + __u32 flags; /* FB_VBLANK flags */ + __u32 count; /* counter of retraces since boot */ + __u32 vcount; /* current scanline position */ + __u32 hcount; /* current scandot position */ + __u32 reserved[4]; /* reserved for future compatibility */ +}; + +/* Internal HW accel */ +#define ROP_COPY 0 +#define ROP_XOR 1 + +struct fb_copyarea { + __u32 dx; + __u32 dy; + __u32 width; + __u32 height; + __u32 sx; + __u32 sy; +}; + +struct fb_fillrect { + __u32 dx; /* screen-relative */ + __u32 dy; + __u32 width; + __u32 height; + __u32 color; + __u32 rop; +}; + +struct fb_image { + __u32 dx; /* Where to place image */ + __u32 dy; + __u32 width; /* Size of image */ + __u32 height; + __u32 fg_color; /* Only used when a mono bitmap */ + __u32 bg_color; + __u8 depth; /* Depth of the image */ + const char *data; /* Pointer to image data */ + struct fb_cmap cmap; /* color map info */ +}; + +/* + * hardware cursor control + */ + +#define FB_CUR_SETIMAGE 0x01 +#define FB_CUR_SETPOS 0x02 +#define FB_CUR_SETHOT 0x04 +#define FB_CUR_SETCMAP 0x08 +#define FB_CUR_SETSHAPE 0x10 +#define FB_CUR_SETSIZE 0x20 +#define FB_CUR_SETALL 0xFF + +struct fbcurpos { + __u16 x, y; +}; + +struct fb_cursor { + __u16 set; /* what to set */ + __u16 enable; /* cursor on/off */ + __u16 rop; /* bitop operation */ + const char *mask; /* cursor mask bits */ + struct fbcurpos hot; /* cursor hot spot */ + struct fb_image image; /* Cursor image */ +}; + +#ifdef CONFIG_FB_BACKLIGHT +/* Settings for the generic backlight code */ +#define FB_BACKLIGHT_LEVELS 128 +#define FB_BACKLIGHT_MAX 0xFF +#endif + +#ifdef __KERNEL__ + +struct vm_area_struct; +struct fb_info; +struct device; +struct file; + +/* Definitions below are used in the parsed monitor specs */ +#define FB_DPMS_ACTIVE_OFF 1 +#define FB_DPMS_SUSPEND 2 +#define FB_DPMS_STANDBY 4 + +#define FB_DISP_DDI 1 +#define FB_DISP_ANA_700_300 2 +#define FB_DISP_ANA_714_286 4 +#define FB_DISP_ANA_1000_400 8 +#define FB_DISP_ANA_700_000 16 + +#define FB_DISP_MONO 32 +#define FB_DISP_RGB 64 +#define FB_DISP_MULTI 128 +#define FB_DISP_UNKNOWN 256 + +#define FB_SIGNAL_NONE 0 +#define FB_SIGNAL_BLANK_BLANK 1 +#define FB_SIGNAL_SEPARATE 2 +#define FB_SIGNAL_COMPOSITE 4 +#define FB_SIGNAL_SYNC_ON_GREEN 8 +#define FB_SIGNAL_SERRATION_ON 16 + +#define FB_MISC_PRIM_COLOR 1 +#define FB_MISC_1ST_DETAIL 2 /* First Detailed Timing is preferred */ +struct fb_chroma { + __u32 redx; /* in fraction of 1024 */ + __u32 greenx; + __u32 bluex; + __u32 whitex; + __u32 redy; + __u32 greeny; + __u32 bluey; + __u32 whitey; +}; + +struct fb_monspecs { + struct fb_chroma chroma; + struct fb_videomode *modedb; /* mode database */ + __u8 manufacturer[4]; /* Manufacturer */ + __u8 monitor[14]; /* Monitor String */ + __u8 serial_no[14]; /* Serial Number */ + __u8 ascii[14]; /* ? */ + __u32 modedb_len; /* mode database length */ + __u32 model; /* Monitor Model */ + __u32 serial; /* Serial Number - Integer */ + __u32 year; /* Year manufactured */ + __u32 week; /* Week Manufactured */ + __u32 hfmin; /* hfreq lower limit (Hz) */ + __u32 hfmax; /* hfreq upper limit (Hz) */ + __u32 dclkmin; /* pixelclock lower limit (Hz) */ + __u32 dclkmax; /* pixelclock upper limit (Hz) */ + __u16 input; /* display type - see FB_DISP_* */ + __u16 dpms; /* DPMS support - see FB_DPMS_ */ + __u16 signal; /* Signal Type - see FB_SIGNAL_* */ + __u16 vfmin; /* vfreq lower limit (Hz) */ + __u16 vfmax; /* vfreq upper limit (Hz) */ + __u16 gamma; /* Gamma - in fractions of 100 */ + __u16 gtf : 1; /* supports GTF */ + __u16 misc; /* Misc flags - see FB_MISC_* */ + __u8 version; /* EDID version... */ + __u8 revision; /* ...and revision */ + __u8 max_x; /* Maximum horizontal size (cm) */ + __u8 max_y; /* Maximum vertical size (cm) */ +}; + +struct fb_cmap_user { + __u32 start; /* First entry */ + __u32 len; /* Number of entries */ + __u16 *red; /* Red values */ + __u16 *green; + __u16 *blue; + __u16 *transp; /* transparency, can be NULL */ +}; + +struct fb_image_user { + __u32 dx; /* Where to place image */ + __u32 dy; + __u32 width; /* Size of image */ + __u32 height; + __u32 fg_color; /* Only used when a mono bitmap */ + __u32 bg_color; + __u8 depth; /* Depth of the image */ + const char *data; /* Pointer to image data */ + struct fb_cmap_user cmap; /* color map info */ +}; + +struct fb_cursor_user { + __u16 set; /* what to set */ + __u16 enable; /* cursor on/off */ + __u16 rop; /* bitop operation */ + const char *mask; /* cursor mask bits */ + struct fbcurpos hot; /* cursor hot spot */ + struct fb_image_user image; /* Cursor image */ +}; + +/* + * Register/unregister for framebuffer events + */ + +/* The resolution of the passed in fb_info about to change */ +#define FB_EVENT_MODE_CHANGE 0x01 +/* The display on this fb_info is beeing suspended, no access to the + * framebuffer is allowed any more after that call returns + */ +#define FB_EVENT_SUSPEND 0x02 +/* The display on this fb_info was resumed, you can restore the display + * if you own it + */ +#define FB_EVENT_RESUME 0x03 +/* An entry from the modelist was removed */ +#define FB_EVENT_MODE_DELETE 0x04 +/* A driver registered itself */ +#define FB_EVENT_FB_REGISTERED 0x05 +/* A driver unregistered itself */ +#define FB_EVENT_FB_UNREGISTERED 0x06 +/* CONSOLE-SPECIFIC: get console to framebuffer mapping */ +#define FB_EVENT_GET_CONSOLE_MAP 0x07 +/* CONSOLE-SPECIFIC: set console to framebuffer mapping */ +#define FB_EVENT_SET_CONSOLE_MAP 0x08 +/* A hardware display blank change occured */ +#define FB_EVENT_BLANK 0x09 +/* Private modelist is to be replaced */ +#define FB_EVENT_NEW_MODELIST 0x0A +/* The resolution of the passed in fb_info about to change and + all vc's should be changed */ +#define FB_EVENT_MODE_CHANGE_ALL 0x0B +/* A software display blank change occured */ +#define FB_EVENT_CONBLANK 0x0C +/* Get drawing requirements */ +#define FB_EVENT_GET_REQ 0x0D +/* Unbind from the console if possible */ +#define FB_EVENT_FB_UNBIND 0x0E + +struct fb_event { + struct fb_info *info; + void *data; +}; + +struct fb_blit_caps { + u32 x; + u32 y; + u32 len; + u32 flags; +}; + +/* + * Pixmap structure definition + * + * The purpose of this structure is to translate data + * from the hardware independent format of fbdev to what + * format the hardware needs. + */ + +#define FB_PIXMAP_DEFAULT 1 /* used internally by fbcon */ +#define FB_PIXMAP_SYSTEM 2 /* memory is in system RAM */ +#define FB_PIXMAP_IO 4 /* memory is iomapped */ +#define FB_PIXMAP_SYNC 256 /* set if GPU can DMA */ + +struct fb_pixmap { + u8 *addr; /* pointer to memory */ + u32 size; /* size of buffer in bytes */ + u32 offset; /* current offset to buffer */ + u32 buf_align; /* byte alignment of each bitmap */ + u32 scan_align; /* alignment per scanline */ + u32 access_align; /* alignment per read/write (bits) */ + u32 flags; /* see FB_PIXMAP_* */ + u32 blit_x; /* supported bit block dimensions (1-32)*/ + u32 blit_y; /* Format: blit_x = 1 << (width - 1) */ + /* blit_y = 1 << (height - 1) */ + /* if 0, will be set to 0xffffffff (all)*/ + /* access methods */ + void (*writeio)(struct fb_info *info, void *dst, void *src, unsigned int size); + void (*readio) (struct fb_info *info, void *dst, void *src, unsigned int size); +}; + +#ifdef CONFIG_FB_DEFERRED_IO +struct fb_deferred_io { + /* delay between mkwrite and deferred handler */ + unsigned long delay; + struct mutex lock; /* mutex that protects the page list */ + struct list_head pagelist; /* list of touched pages */ + /* callback */ + void (*deferred_io)(struct fb_info *info, struct list_head *pagelist); +}; +#endif + +/* FBINFO_* = fb_info.flags bit flags */ +#define FBINFO_MODULE 0x0001 /* Low-level driver is a module */ +#define FBINFO_HWACCEL_DISABLED 0x0002 + /* When FBINFO_HWACCEL_DISABLED is set: + * Hardware acceleration is turned off. Software implementations + * of required functions (copyarea(), fillrect(), and imageblit()) + * takes over; acceleration engine should be in a quiescent state */ + +/* hints */ +#define FBINFO_PARTIAL_PAN_OK 0x0040 /* otw use pan only for double-buffering */ +#define FBINFO_READS_FAST 0x0080 /* soft-copy faster than rendering */ + +/* + * A driver may set this flag to indicate that it does want a set_par to be + * called every time when fbcon_switch is executed. The advantage is that with + * this flag set you can really be sure that set_par is always called before + * any of the functions dependant on the correct hardware state or altering + * that state, even if you are using some broken X releases. The disadvantage + * is that it introduces unwanted delays to every console switch if set_par + * is slow. It is a good idea to try this flag in the drivers initialization + * code whenever there is a bug report related to switching between X and the + * framebuffer console. + */ +#define FBINFO_MISC_ALWAYS_SETPAR 0x40000 + +/* + * Host and GPU endianness differ. + */ +#define FBINFO_FOREIGN_ENDIAN 0x100000 +/* + * Big endian math. This is the same flags as above, but with different + * meaning, it is set by the fb subsystem depending FOREIGN_ENDIAN flag + * and host endianness. Drivers should not use this flag. + */ +#define FBINFO_BE_MATH 0x100000 + +struct fb_info { + int node; + int flags; + struct fb_var_screeninfo var; /* Current var */ + struct fb_fix_screeninfo fix; /* Current fix */ + struct fb_monspecs monspecs; /* Current Monitor specs */ + struct fb_pixmap pixmap; /* Image hardware mapper */ + struct fb_pixmap sprite; /* Cursor hardware mapper */ + struct fb_cmap cmap; /* Current cmap */ + struct list_head modelist; /* mode list */ + struct fb_videomode *mode; /* current mode */ + + char *screen_base; /* Virtual address */ + unsigned long screen_size; /* Amount of ioremapped VRAM or 0 */ + void *pseudo_palette; /* Fake palette of 16 colors */ +#define FBINFO_STATE_RUNNING 0 +#define FBINFO_STATE_SUSPENDED 1 + u32 state; /* Hardware state i.e suspend */ + void *fbcon_par; /* fbcon use-only private area */ + /* From here on everything is device dependent */ + void *par; +}; + +#define FBINFO_DEFAULT 0 + +#define FBINFO_FLAG_MODULE FBINFO_MODULE +#define FBINFO_FLAG_DEFAULT FBINFO_DEFAULT + +// This will go away +#if defined(__sparc__) + +/* We map all of our framebuffers such that big-endian accesses + * are what we want, so the following is sufficient. + */ + +// This will go away +#define fb_readb sbus_readb +#define fb_readw sbus_readw +#define fb_readl sbus_readl +#define fb_readq sbus_readq +#define fb_writeb sbus_writeb +#define fb_writew sbus_writew +#define fb_writel sbus_writel +#define fb_writeq sbus_writeq +#define fb_memset sbus_memset_io + +#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__avr32__) || defined(__bfin__) + +#define fb_readb __raw_readb +#define fb_readw __raw_readw +#define fb_readl __raw_readl +#define fb_readq __raw_readq +#define fb_writeb __raw_writeb +#define fb_writew __raw_writew +#define fb_writel __raw_writel +#define fb_writeq __raw_writeq +#define fb_memset memset_io + +#else + +#define fb_readb(addr) (*(volatile u8 *) (addr)) +#define fb_readw(addr) (*(volatile u16 *) (addr)) +#define fb_readl(addr) (*(volatile u32 *) (addr)) +#define fb_readq(addr) (*(volatile u64 *) (addr)) +#define fb_writeb(b,addr) (*(volatile u8 *) (addr) = (b)) +#define fb_writew(b,addr) (*(volatile u16 *) (addr) = (b)) +#define fb_writel(b,addr) (*(volatile u32 *) (addr) = (b)) +#define fb_writeq(b,addr) (*(volatile u64 *) (addr) = (b)) +#define fb_memset memset + +#endif + +#define FB_LEFT_POS(p, bpp) (fb_be_math(p) ? (32 - (bpp)) : 0) +#define FB_SHIFT_HIGH(p, val, bits) (fb_be_math(p) ? (val) >> (bits) : \ + (val) << (bits)) +#define FB_SHIFT_LOW(p, val, bits) (fb_be_math(p) ? (val) << (bits) : \ + (val) >> (bits)) +/* drivers/video/fbmon.c */ +#define FB_MAXTIMINGS 0 +#define FB_VSYNCTIMINGS 1 +#define FB_HSYNCTIMINGS 2 +#define FB_DCLKTIMINGS 3 +#define FB_IGNOREMON 0x100 + +#define FB_MODE_IS_UNKNOWN 0 +#define FB_MODE_IS_DETAILED 1 +#define FB_MODE_IS_STANDARD 2 +#define FB_MODE_IS_VESA 4 +#define FB_MODE_IS_CALCULATED 8 +#define FB_MODE_IS_FIRST 16 +#define FB_MODE_IS_FROM_VAR 32 + + +/* drivers/video/fbcmap.c */ + +extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp); +extern void fb_dealloc_cmap(struct fb_cmap *cmap); +extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to); +extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to); +extern int fb_set_cmap(struct fb_cmap *cmap, struct fb_info *fb_info); +extern int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *fb_info); +extern const struct fb_cmap *fb_default_cmap(int len); +extern void fb_invert_cmaps(void); + +struct fb_videomode { + const char *name; /* optional */ + u32 refresh; /* optional */ + u32 xres; + u32 yres; + u32 pixclock; + u32 left_margin; + u32 right_margin; + u32 upper_margin; + u32 lower_margin; + u32 hsync_len; + u32 vsync_len; + u32 sync; + u32 vmode; + u32 flag; +}; + +#endif /* __KERNEL__ */ + +#endif /* _LINUX_FB_H */ From 575001e40c9d10e63f2924649098e7c07d3985c7 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Wed, 13 Oct 2010 12:16:35 +0200 Subject: [PATCH 021/116] MX51: Add IPU driver for video support The patch is a porting of the IPU Linux driver developed by Freescale to have framebuffer functionalities in u-boot. The port is based on kernel 2.6.31 commit cc4fe714041805997b601fe8e5dd585d8a99297f, as delivered by Freescale [i.MX BSP]. Most features are dropped from the original driver and only LCD support is the goal of this porting. Signed-off-by: Stefano Babic --- arch/arm/include/asm/arch-mx5/crm_regs.h | 11 + drivers/video/ipu.h | 321 +++++ drivers/video/ipu_common.c | 1183 +++++++++++++++++++ drivers/video/ipu_disp.c | 1359 ++++++++++++++++++++++ drivers/video/ipu_regs.h | 418 +++++++ 5 files changed, 3292 insertions(+) create mode 100644 drivers/video/ipu.h create mode 100644 drivers/video/ipu_common.c create mode 100644 drivers/video/ipu_disp.c create mode 100644 drivers/video/ipu_regs.h diff --git a/arch/arm/include/asm/arch-mx5/crm_regs.h b/arch/arm/include/asm/arch-mx5/crm_regs.h index 14aa231a5b0..4ed8eb31c8a 100644 --- a/arch/arm/include/asm/arch-mx5/crm_regs.h +++ b/arch/arm/include/asm/arch-mx5/crm_regs.h @@ -189,4 +189,15 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0 #define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x7 +/* Define the bits in register CCDR */ +#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17) + +/* Define the bits in register CCGRx */ +#define MXC_CCM_CCGR_CG_MASK 0x3 + +#define MXC_CCM_CCGR5_CG5_OFFSET 10 + +/* Define the bits in register CLPCR */ +#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18) + #endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */ diff --git a/drivers/video/ipu.h b/drivers/video/ipu.h new file mode 100644 index 00000000000..d8bc287d841 --- /dev/null +++ b/drivers/video/ipu.h @@ -0,0 +1,321 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de + * + * Linux IPU driver for MX51: + * + * (C) Copyright 2005-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_IPU_H__ +#define __ASM_ARCH_IPU_H__ + +#include + +#define IDMA_CHAN_INVALID 0xFF +#define HIGH_RESOLUTION_WIDTH 1024 + +struct clk { + const char *name; + int id; + /* Source clock this clk depends on */ + struct clk *parent; + /* Secondary clock to enable/disable with this clock */ + struct clk *secondary; + /* Current clock rate */ + unsigned long rate; + /* Reference count of clock enable/disable */ + __s8 usecount; + /* Register bit position for clock's enable/disable control. */ + u8 enable_shift; + /* Register address for clock's enable/disable control. */ + void *enable_reg; + u32 flags; + /* + * Function ptr to recalculate the clock's rate based on parent + * clock's rate + */ + void (*recalc) (struct clk *); + /* + * Function ptr to set the clock to a new rate. The rate must match a + * supported rate returned from round_rate. Leave blank if clock is not + * programmable + */ + int (*set_rate) (struct clk *, unsigned long); + /* + * Function ptr to round the requested clock rate to the nearest + * supported rate that is less than or equal to the requested rate. + */ + unsigned long (*round_rate) (struct clk *, unsigned long); + /* + * Function ptr to enable the clock. Leave blank if clock can not + * be gated. + */ + int (*enable) (struct clk *); + /* + * Function ptr to disable the clock. Leave blank if clock can not + * be gated. + */ + void (*disable) (struct clk *); + /* Function ptr to set the parent clock of the clock. */ + int (*set_parent) (struct clk *, struct clk *); +}; + +/* + * Enumeration of Synchronous (Memory-less) panel types + */ +typedef enum { + IPU_PANEL_SHARP_TFT, + IPU_PANEL_TFT, +} ipu_panel_t; + +/* IPU Pixel format definitions */ +#define fourcc(a, b, c, d)\ + (((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24)) + +/* + * Pixel formats are defined with ASCII FOURCC code. The pixel format codes are + * the same used by V4L2 API. + */ + +#define IPU_PIX_FMT_GENERIC fourcc('I', 'P', 'U', '0') +#define IPU_PIX_FMT_GENERIC_32 fourcc('I', 'P', 'U', '1') +#define IPU_PIX_FMT_LVDS666 fourcc('L', 'V', 'D', '6') +#define IPU_PIX_FMT_LVDS888 fourcc('L', 'V', 'D', '8') + +#define IPU_PIX_FMT_RGB332 fourcc('R', 'G', 'B', '1') /*< 8 RGB-3-3-2 */ +#define IPU_PIX_FMT_RGB555 fourcc('R', 'G', 'B', 'O') /*< 16 RGB-5-5-5 */ +#define IPU_PIX_FMT_RGB565 fourcc('R', 'G', 'B', 'P') /*< 1 6 RGB-5-6-5 */ +#define IPU_PIX_FMT_RGB666 fourcc('R', 'G', 'B', '6') /*< 18 RGB-6-6-6 */ +#define IPU_PIX_FMT_BGR666 fourcc('B', 'G', 'R', '6') /*< 18 BGR-6-6-6 */ +#define IPU_PIX_FMT_BGR24 fourcc('B', 'G', 'R', '3') /*< 24 BGR-8-8-8 */ +#define IPU_PIX_FMT_RGB24 fourcc('R', 'G', 'B', '3') /*< 24 RGB-8-8-8 */ +#define IPU_PIX_FMT_BGR32 fourcc('B', 'G', 'R', '4') /*< 32 BGR-8-8-8-8 */ +#define IPU_PIX_FMT_BGRA32 fourcc('B', 'G', 'R', 'A') /*< 32 BGR-8-8-8-8 */ +#define IPU_PIX_FMT_RGB32 fourcc('R', 'G', 'B', '4') /*< 32 RGB-8-8-8-8 */ +#define IPU_PIX_FMT_RGBA32 fourcc('R', 'G', 'B', 'A') /*< 32 RGB-8-8-8-8 */ +#define IPU_PIX_FMT_ABGR32 fourcc('A', 'B', 'G', 'R') /*< 32 ABGR-8-8-8-8 */ + +/* YUV Interleaved Formats */ +#define IPU_PIX_FMT_YUYV fourcc('Y', 'U', 'Y', 'V') /*< 16 YUV 4:2:2 */ +#define IPU_PIX_FMT_UYVY fourcc('U', 'Y', 'V', 'Y') /*< 16 YUV 4:2:2 */ +#define IPU_PIX_FMT_Y41P fourcc('Y', '4', '1', 'P') /*< 12 YUV 4:1:1 */ +#define IPU_PIX_FMT_YUV444 fourcc('Y', '4', '4', '4') /*< 24 YUV 4:4:4 */ + +/* two planes -- one Y, one Cb + Cr interleaved */ +#define IPU_PIX_FMT_NV12 fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ + +#define IPU_PIX_FMT_GREY fourcc('G', 'R', 'E', 'Y') /*< 8 Greyscale */ +#define IPU_PIX_FMT_YVU410P fourcc('Y', 'V', 'U', '9') /*< 9 YVU 4:1:0 */ +#define IPU_PIX_FMT_YUV410P fourcc('Y', 'U', 'V', '9') /*< 9 YUV 4:1:0 */ +#define IPU_PIX_FMT_YVU420P fourcc('Y', 'V', '1', '2') /*< 12 YVU 4:2:0 */ +#define IPU_PIX_FMT_YUV420P fourcc('I', '4', '2', '0') /*< 12 YUV 4:2:0 */ +#define IPU_PIX_FMT_YUV420P2 fourcc('Y', 'U', '1', '2') /*< 12 YUV 4:2:0 */ +#define IPU_PIX_FMT_YVU422P fourcc('Y', 'V', '1', '6') /*< 16 YVU 4:2:2 */ +#define IPU_PIX_FMT_YUV422P fourcc('4', '2', '2', 'P') /*< 16 YUV 4:2:2 */ + +/* + * IPU Driver channels definitions. + * Note these are different from IDMA channels + */ +#define IPU_MAX_CH 32 +#define _MAKE_CHAN(num, v_in, g_in, a_in, out) \ + ((num << 24) | (v_in << 18) | (g_in << 12) | (a_in << 6) | out) +#define _MAKE_ALT_CHAN(ch) (ch | (IPU_MAX_CH << 24)) +#define IPU_CHAN_ID(ch) (ch >> 24) +#define IPU_CHAN_ALT(ch) (ch & 0x02000000) +#define IPU_CHAN_ALPHA_IN_DMA(ch) ((uint32_t) (ch >> 6) & 0x3F) +#define IPU_CHAN_GRAPH_IN_DMA(ch) ((uint32_t) (ch >> 12) & 0x3F) +#define IPU_CHAN_VIDEO_IN_DMA(ch) ((uint32_t) (ch >> 18) & 0x3F) +#define IPU_CHAN_OUT_DMA(ch) ((uint32_t) (ch & 0x3F)) +#define NO_DMA 0x3F +#define ALT 1 + +/* + * Enumeration of IPU logical channels. An IPU logical channel is defined as a + * combination of an input (memory to IPU), output (IPU to memory), and/or + * secondary input IDMA channels and in some cases an Image Converter task. + * Some channels consist of only an input or output. + */ +typedef enum { + CHAN_NONE = -1, + + MEM_DC_SYNC = _MAKE_CHAN(7, 28, NO_DMA, NO_DMA, NO_DMA), + MEM_DC_ASYNC = _MAKE_CHAN(8, 41, NO_DMA, NO_DMA, NO_DMA), + MEM_BG_SYNC = _MAKE_CHAN(9, 23, NO_DMA, 51, NO_DMA), + MEM_FG_SYNC = _MAKE_CHAN(10, 27, NO_DMA, 31, NO_DMA), + + MEM_BG_ASYNC0 = _MAKE_CHAN(11, 24, NO_DMA, 52, NO_DMA), + MEM_FG_ASYNC0 = _MAKE_CHAN(12, 29, NO_DMA, 33, NO_DMA), + MEM_BG_ASYNC1 = _MAKE_ALT_CHAN(MEM_BG_ASYNC0), + MEM_FG_ASYNC1 = _MAKE_ALT_CHAN(MEM_FG_ASYNC0), + + DIRECT_ASYNC0 = _MAKE_CHAN(13, NO_DMA, NO_DMA, NO_DMA, NO_DMA), + DIRECT_ASYNC1 = _MAKE_CHAN(14, NO_DMA, NO_DMA, NO_DMA, NO_DMA), + +} ipu_channel_t; + +/* + * Enumeration of types of buffers for a logical channel. + */ +typedef enum { + IPU_OUTPUT_BUFFER = 0, /*< Buffer for output from IPU */ + IPU_ALPHA_IN_BUFFER = 1, /*< Buffer for input to IPU */ + IPU_GRAPH_IN_BUFFER = 2, /*< Buffer for input to IPU */ + IPU_VIDEO_IN_BUFFER = 3, /*< Buffer for input to IPU */ + IPU_INPUT_BUFFER = IPU_VIDEO_IN_BUFFER, + IPU_SEC_INPUT_BUFFER = IPU_GRAPH_IN_BUFFER, +} ipu_buffer_t; + +#define IPU_PANEL_SERIAL 1 +#define IPU_PANEL_PARALLEL 2 + +struct ipu_channel { + u8 video_in_dma; + u8 alpha_in_dma; + u8 graph_in_dma; + u8 out_dma; +}; + +enum ipu_dmfc_type { + DMFC_NORMAL = 0, + DMFC_HIGH_RESOLUTION_DC, + DMFC_HIGH_RESOLUTION_DP, + DMFC_HIGH_RESOLUTION_ONLY_DP, +}; + + +/* + * Union of initialization parameters for a logical channel. + */ +typedef union { + struct { + uint32_t di; + unsigned char interlaced; + } mem_dc_sync; + struct { + uint32_t temp; + } mem_sdc_fg; + struct { + uint32_t di; + unsigned char interlaced; + uint32_t in_pixel_fmt; + uint32_t out_pixel_fmt; + unsigned char alpha_chan_en; + } mem_dp_bg_sync; + struct { + uint32_t temp; + } mem_sdc_bg; + struct { + uint32_t di; + unsigned char interlaced; + uint32_t in_pixel_fmt; + uint32_t out_pixel_fmt; + unsigned char alpha_chan_en; + } mem_dp_fg_sync; +} ipu_channel_params_t; + +/* + * Bitfield of Display Interface signal polarities. + */ +typedef struct { + unsigned datamask_en:1; + unsigned ext_clk:1; + unsigned interlaced:1; + unsigned odd_field_first:1; + unsigned clksel_en:1; + unsigned clkidle_en:1; + unsigned data_pol:1; /* true = inverted */ + unsigned clk_pol:1; /* true = rising edge */ + unsigned enable_pol:1; + unsigned Hsync_pol:1; /* true = active high */ + unsigned Vsync_pol:1; +} ipu_di_signal_cfg_t; + +typedef enum { + RGB, + YCbCr, + YUV +} ipu_color_space_t; + +/* Common IPU API */ +int32_t ipu_init_channel(ipu_channel_t channel, ipu_channel_params_t *params); +void ipu_uninit_channel(ipu_channel_t channel); + +int32_t ipu_init_channel_buffer(ipu_channel_t channel, ipu_buffer_t type, + uint32_t pixel_fmt, + uint16_t width, uint16_t height, + uint32_t stride, + dma_addr_t phyaddr_0, dma_addr_t phyaddr_1, + uint32_t u_offset, uint32_t v_offset); + +int32_t ipu_update_channel_buffer(ipu_channel_t channel, ipu_buffer_t type, + uint32_t bufNum, dma_addr_t phyaddr); + +int32_t ipu_is_channel_busy(ipu_channel_t channel); +void ipu_clear_buffer_ready(ipu_channel_t channel, ipu_buffer_t type, + uint32_t bufNum); +int32_t ipu_enable_channel(ipu_channel_t channel); +int32_t ipu_disable_channel(ipu_channel_t channel); + +int32_t ipu_init_sync_panel(int disp, + uint32_t pixel_clk, + uint16_t width, uint16_t height, + uint32_t pixel_fmt, + uint16_t h_start_width, uint16_t h_sync_width, + uint16_t h_end_width, uint16_t v_start_width, + uint16_t v_sync_width, uint16_t v_end_width, + uint32_t v_to_h_sync, ipu_di_signal_cfg_t sig); + +int32_t ipu_disp_set_global_alpha(ipu_channel_t channel, unsigned char enable, + uint8_t alpha); +int32_t ipu_disp_set_color_key(ipu_channel_t channel, unsigned char enable, + uint32_t colorKey); + +uint32_t bytes_per_pixel(uint32_t fmt); + +void clk_enable(struct clk *clk); +void clk_disable(struct clk *clk); +u32 clk_get_rate(struct clk *clk); +int clk_set_rate(struct clk *clk, unsigned long rate); +long clk_round_rate(struct clk *clk, unsigned long rate); +int clk_set_parent(struct clk *clk, struct clk *parent); +int clk_get_usecount(struct clk *clk); +struct clk *clk_get_parent(struct clk *clk); + +void ipu_dump_registers(void); +int ipu_probe(void); + +void ipu_dmfc_init(int dmfc_type, int first); +void ipu_init_dc_mappings(void); +void ipu_dmfc_set_wait4eot(int dma_chan, int width); +void ipu_dc_init(int dc_chan, int di, unsigned char interlaced); +void ipu_dc_uninit(int dc_chan); +void ipu_dp_dc_enable(ipu_channel_t channel); +int ipu_dp_init(ipu_channel_t channel, uint32_t in_pixel_fmt, + uint32_t out_pixel_fmt); +void ipu_dp_uninit(ipu_channel_t channel); +void ipu_dp_dc_disable(ipu_channel_t channel, unsigned char swap); +ipu_color_space_t format_to_colorspace(uint32_t fmt); + +#endif diff --git a/drivers/video/ipu_common.c b/drivers/video/ipu_common.c new file mode 100644 index 00000000000..9d20c864bac --- /dev/null +++ b/drivers/video/ipu_common.c @@ -0,0 +1,1183 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de + * + * Linux IPU driver for MX51: + * + * (C) Copyright 2005-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* #define DEBUG */ +#include +#include +#include +#include +#include +#include +#include +#include "ipu.h" +#include "ipu_regs.h" + +extern struct mxc_ccm_reg *mxc_ccm; +extern u32 *ipu_cpmem_base; + +struct ipu_ch_param_word { + uint32_t data[5]; + uint32_t res[3]; +}; + +struct ipu_ch_param { + struct ipu_ch_param_word word[2]; +}; + +#define ipu_ch_param_addr(ch) (((struct ipu_ch_param *)ipu_cpmem_base) + (ch)) + +#define _param_word(base, w) \ + (((struct ipu_ch_param *)(base))->word[(w)].data) + +#define ipu_ch_param_set_field(base, w, bit, size, v) { \ + int i = (bit) / 32; \ + int off = (bit) % 32; \ + _param_word(base, w)[i] |= (v) << off; \ + if (((bit) + (size) - 1) / 32 > i) { \ + _param_word(base, w)[i + 1] |= (v) >> (off ? (32 - off) : 0); \ + } \ +} + +#define ipu_ch_param_mod_field(base, w, bit, size, v) { \ + int i = (bit) / 32; \ + int off = (bit) % 32; \ + u32 mask = (1UL << size) - 1; \ + u32 temp = _param_word(base, w)[i]; \ + temp &= ~(mask << off); \ + _param_word(base, w)[i] = temp | (v) << off; \ + if (((bit) + (size) - 1) / 32 > i) { \ + temp = _param_word(base, w)[i + 1]; \ + temp &= ~(mask >> (32 - off)); \ + _param_word(base, w)[i + 1] = \ + temp | ((v) >> (off ? (32 - off) : 0)); \ + } \ +} + +#define ipu_ch_param_read_field(base, w, bit, size) ({ \ + u32 temp2; \ + int i = (bit) / 32; \ + int off = (bit) % 32; \ + u32 mask = (1UL << size) - 1; \ + u32 temp1 = _param_word(base, w)[i]; \ + temp1 = mask & (temp1 >> off); \ + if (((bit)+(size) - 1) / 32 > i) { \ + temp2 = _param_word(base, w)[i + 1]; \ + temp2 &= mask >> (off ? (32 - off) : 0); \ + temp1 |= temp2 << (off ? (32 - off) : 0); \ + } \ + temp1; \ +}) + + +void clk_enable(struct clk *clk) +{ + if (clk) { + if (clk->usecount++ == 0) { + clk->enable(clk); + } + } +} + +void clk_disable(struct clk *clk) +{ + if (clk) { + if (!(--clk->usecount)) { + if (clk->disable) + clk->disable(clk); + } + } +} + +int clk_get_usecount(struct clk *clk) +{ + if (clk == NULL) + return 0; + + return clk->usecount; +} + +u32 clk_get_rate(struct clk *clk) +{ + if (!clk) + return 0; + + return clk->rate; +} + +struct clk *clk_get_parent(struct clk *clk) +{ + if (!clk) + return 0; + + return clk->parent; +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + if (clk && clk->set_rate) + clk->set_rate(clk, rate); + return clk->rate; +} + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (clk == NULL || !clk->round_rate) + return 0; + + return clk->round_rate(clk, rate); +} + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + clk->parent = parent; + if (clk->set_parent) + return clk->set_parent(clk, parent); + return 0; +} + +static int clk_ipu_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg |= MXC_CCM_CCGR_CG_MASK << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + /* Handshake with IPU when certain clock rates are changed. */ + reg = __raw_readl(&mxc_ccm->ccdr); + reg &= ~MXC_CCM_CCDR_IPU_HS_MASK; + __raw_writel(reg, &mxc_ccm->ccdr); + + /* Handshake with IPU when LPM is entered as its enabled. */ + reg = __raw_readl(&mxc_ccm->clpcr); + reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS; + __raw_writel(reg, &mxc_ccm->clpcr); + + return 0; +} + +static void clk_ipu_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(MXC_CCM_CCGR_CG_MASK << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); + + /* + * No handshake with IPU whe dividers are changed + * as its not enabled. + */ + reg = __raw_readl(&mxc_ccm->ccdr); + reg |= MXC_CCM_CCDR_IPU_HS_MASK; + __raw_writel(reg, &mxc_ccm->ccdr); + + /* No handshake with IPU when LPM is entered as its not enabled. */ + reg = __raw_readl(&mxc_ccm->clpcr); + reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS; + __raw_writel(reg, &mxc_ccm->clpcr); +} + + +static struct clk ipu_clk = { + .name = "ipu_clk", + .rate = 133000000, + .enable_reg = (u32 *)(MXC_CCM_BASE + + offsetof(struct mxc_ccm_reg, CCGR5)), + .enable_shift = MXC_CCM_CCGR5_CG5_OFFSET, + .enable = clk_ipu_enable, + .disable = clk_ipu_disable, + .usecount = 0, +}; + +/* Globals */ +struct clk *g_ipu_clk; +unsigned char g_ipu_clk_enabled; +struct clk *g_di_clk[2]; +struct clk *g_pixel_clk[2]; +unsigned char g_dc_di_assignment[10]; +uint32_t g_channel_init_mask; +uint32_t g_channel_enable_mask; + +static int ipu_dc_use_count; +static int ipu_dp_use_count; +static int ipu_dmfc_use_count; +static int ipu_di_use_count[2]; + +u32 *ipu_cpmem_base; +u32 *ipu_dc_tmpl_reg; + +/* Static functions */ + +static inline void ipu_ch_param_set_high_priority(uint32_t ch) +{ + ipu_ch_param_mod_field(ipu_ch_param_addr(ch), 1, 93, 2, 1); +}; + +static inline uint32_t channel_2_dma(ipu_channel_t ch, ipu_buffer_t type) +{ + return ((uint32_t) ch >> (6 * type)) & 0x3F; +}; + +/* Either DP BG or DP FG can be graphic window */ +static inline int ipu_is_dp_graphic_chan(uint32_t dma_chan) +{ + return (dma_chan == 23 || dma_chan == 27); +} + +static inline int ipu_is_dmfc_chan(uint32_t dma_chan) +{ + return ((dma_chan >= 23) && (dma_chan <= 29)); +} + + +static inline void ipu_ch_param_set_buffer(uint32_t ch, int bufNum, + dma_addr_t phyaddr) +{ + ipu_ch_param_mod_field(ipu_ch_param_addr(ch), 1, 29 * bufNum, 29, + phyaddr / 8); +}; + +#define idma_is_valid(ch) (ch != NO_DMA) +#define idma_mask(ch) (idma_is_valid(ch) ? (1UL << (ch & 0x1F)) : 0) +#define idma_is_set(reg, dma) (__raw_readl(reg(dma)) & idma_mask(dma)) + +static void ipu_pixel_clk_recalc(struct clk *clk) +{ + u32 div = __raw_readl(DI_BS_CLKGEN0(clk->id)); + if (div == 0) + clk->rate = 0; + else + clk->rate = (clk->parent->rate * 16) / div; +} + +static unsigned long ipu_pixel_clk_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div, div1; + u32 tmp; + /* + * Calculate divider + * Fractional part is 4 bits, + * so simply multiply by 2^4 to get fractional part. + */ + tmp = (clk->parent->rate * 16); + div = tmp / rate; + + if (div < 0x10) /* Min DI disp clock divider is 1 */ + div = 0x10; + if (div & ~0xFEF) + div &= 0xFF8; + else { + div1 = div & 0xFE0; + if ((tmp/div1 - tmp/div) < rate / 4) + div = div1; + else + div &= 0xFF8; + } + return (clk->parent->rate * 16) / div; +} + +static int ipu_pixel_clk_set_rate(struct clk *clk, unsigned long rate) +{ + u32 div = (clk->parent->rate * 16) / rate; + + __raw_writel(div, DI_BS_CLKGEN0(clk->id)); + + /* Setup pixel clock timing */ + __raw_writel((div / 16) << 16, DI_BS_CLKGEN1(clk->id)); + + clk->rate = (clk->parent->rate * 16) / div; + return 0; +} + +static int ipu_pixel_clk_enable(struct clk *clk) +{ + u32 disp_gen = __raw_readl(IPU_DISP_GEN); + disp_gen |= clk->id ? DI1_COUNTER_RELEASE : DI0_COUNTER_RELEASE; + __raw_writel(disp_gen, IPU_DISP_GEN); + + return 0; +} + +static void ipu_pixel_clk_disable(struct clk *clk) +{ + u32 disp_gen = __raw_readl(IPU_DISP_GEN); + disp_gen &= clk->id ? ~DI1_COUNTER_RELEASE : ~DI0_COUNTER_RELEASE; + __raw_writel(disp_gen, IPU_DISP_GEN); + +} + +static int ipu_pixel_clk_set_parent(struct clk *clk, struct clk *parent) +{ + u32 di_gen = __raw_readl(DI_GENERAL(clk->id)); + + if (parent == g_ipu_clk) + di_gen &= ~DI_GEN_DI_CLK_EXT; + else if (!IS_ERR(g_di_clk[clk->id]) && parent == g_di_clk[clk->id]) + di_gen |= DI_GEN_DI_CLK_EXT; + else + return -EINVAL; + + __raw_writel(di_gen, DI_GENERAL(clk->id)); + ipu_pixel_clk_recalc(clk); + return 0; +} + +static struct clk pixel_clk[] = { + { + .name = "pixel_clk", + .id = 0, + .recalc = ipu_pixel_clk_recalc, + .set_rate = ipu_pixel_clk_set_rate, + .round_rate = ipu_pixel_clk_round_rate, + .set_parent = ipu_pixel_clk_set_parent, + .enable = ipu_pixel_clk_enable, + .disable = ipu_pixel_clk_disable, + .usecount = 0, + }, + { + .name = "pixel_clk", + .id = 1, + .recalc = ipu_pixel_clk_recalc, + .set_rate = ipu_pixel_clk_set_rate, + .round_rate = ipu_pixel_clk_round_rate, + .set_parent = ipu_pixel_clk_set_parent, + .enable = ipu_pixel_clk_enable, + .disable = ipu_pixel_clk_disable, + .usecount = 0, + }, +}; + +/* + * This function resets IPU + */ +void ipu_reset(void) +{ + u32 *reg; + u32 value; + + reg = (u32 *)SRC_BASE_ADDR; + value = __raw_readl(reg); + value = value | SW_IPU_RST; + __raw_writel(value, reg); +} + +/* + * This function is called by the driver framework to initialize the IPU + * hardware. + * + * @param dev The device structure for the IPU passed in by the + * driver framework. + * + * @return Returns 0 on success or negative error code on error + */ +int ipu_probe(void) +{ + unsigned long ipu_base; + u32 temp; + + u32 *reg_hsc_mcd = (u32 *)MIPI_HSC_BASE_ADDR; + u32 *reg_hsc_mxt_conf = (u32 *)(MIPI_HSC_BASE_ADDR + 0x800); + + __raw_writel(0xF00, reg_hsc_mcd); + + /* CSI mode reserved*/ + temp = __raw_readl(reg_hsc_mxt_conf); + __raw_writel(temp | 0x0FF, reg_hsc_mxt_conf); + + temp = __raw_readl(reg_hsc_mxt_conf); + __raw_writel(temp | 0x10000, reg_hsc_mxt_conf); + + ipu_base = IPU_CTRL_BASE_ADDR; + ipu_cpmem_base = (u32 *)(ipu_base + IPU_CPMEM_REG_BASE); + ipu_dc_tmpl_reg = (u32 *)(ipu_base + IPU_DC_TMPL_REG_BASE); + + g_pixel_clk[0] = &pixel_clk[0]; + g_pixel_clk[1] = &pixel_clk[1]; + + g_ipu_clk = &ipu_clk; + debug("ipu_clk = %u\n", clk_get_rate(g_ipu_clk)); + + ipu_reset(); + + clk_set_parent(g_pixel_clk[0], g_ipu_clk); + clk_set_parent(g_pixel_clk[1], g_ipu_clk); + clk_enable(g_ipu_clk); + + g_di_clk[0] = NULL; + g_di_clk[1] = NULL; + + __raw_writel(0x807FFFFF, IPU_MEM_RST); + while (__raw_readl(IPU_MEM_RST) & 0x80000000) + ; + + ipu_init_dc_mappings(); + + __raw_writel(0, IPU_INT_CTRL(5)); + __raw_writel(0, IPU_INT_CTRL(6)); + __raw_writel(0, IPU_INT_CTRL(9)); + __raw_writel(0, IPU_INT_CTRL(10)); + + /* DMFC Init */ + ipu_dmfc_init(DMFC_NORMAL, 1); + + /* Set sync refresh channels as high priority */ + __raw_writel(0x18800000L, IDMAC_CHA_PRI(0)); + + /* Set MCU_T to divide MCU access window into 2 */ + __raw_writel(0x00400000L | (IPU_MCU_T_DEFAULT << 18), IPU_DISP_GEN); + + clk_disable(g_ipu_clk); + + return 0; +} + +void ipu_dump_registers(void) +{ + debug("IPU_CONF = \t0x%08X\n", __raw_readl(IPU_CONF)); + debug("IDMAC_CONF = \t0x%08X\n", __raw_readl(IDMAC_CONF)); + debug("IDMAC_CHA_EN1 = \t0x%08X\n", + __raw_readl(IDMAC_CHA_EN(0))); + debug("IDMAC_CHA_EN2 = \t0x%08X\n", + __raw_readl(IDMAC_CHA_EN(32))); + debug("IDMAC_CHA_PRI1 = \t0x%08X\n", + __raw_readl(IDMAC_CHA_PRI(0))); + debug("IDMAC_CHA_PRI2 = \t0x%08X\n", + __raw_readl(IDMAC_CHA_PRI(32))); + debug("IPU_CHA_DB_MODE_SEL0 = \t0x%08X\n", + __raw_readl(IPU_CHA_DB_MODE_SEL(0))); + debug("IPU_CHA_DB_MODE_SEL1 = \t0x%08X\n", + __raw_readl(IPU_CHA_DB_MODE_SEL(32))); + debug("DMFC_WR_CHAN = \t0x%08X\n", + __raw_readl(DMFC_WR_CHAN)); + debug("DMFC_WR_CHAN_DEF = \t0x%08X\n", + __raw_readl(DMFC_WR_CHAN_DEF)); + debug("DMFC_DP_CHAN = \t0x%08X\n", + __raw_readl(DMFC_DP_CHAN)); + debug("DMFC_DP_CHAN_DEF = \t0x%08X\n", + __raw_readl(DMFC_DP_CHAN_DEF)); + debug("DMFC_IC_CTRL = \t0x%08X\n", + __raw_readl(DMFC_IC_CTRL)); + debug("IPU_FS_PROC_FLOW1 = \t0x%08X\n", + __raw_readl(IPU_FS_PROC_FLOW1)); + debug("IPU_FS_PROC_FLOW2 = \t0x%08X\n", + __raw_readl(IPU_FS_PROC_FLOW2)); + debug("IPU_FS_PROC_FLOW3 = \t0x%08X\n", + __raw_readl(IPU_FS_PROC_FLOW3)); + debug("IPU_FS_DISP_FLOW1 = \t0x%08X\n", + __raw_readl(IPU_FS_DISP_FLOW1)); +} + +/* + * This function is called to initialize a logical IPU channel. + * + * @param channel Input parameter for the logical channel ID to init. + * + * @param params Input parameter containing union of channel + * initialization parameters. + * + * @return Returns 0 on success or negative error code on fail + */ +int32_t ipu_init_channel(ipu_channel_t channel, ipu_channel_params_t *params) +{ + int ret = 0; + uint32_t ipu_conf; + + debug("init channel = %d\n", IPU_CHAN_ID(channel)); + + if (g_ipu_clk_enabled == 0) { + g_ipu_clk_enabled = 1; + clk_enable(g_ipu_clk); + } + + + if (g_channel_init_mask & (1L << IPU_CHAN_ID(channel))) { + printf("Warning: channel already initialized %d\n", + IPU_CHAN_ID(channel)); + } + + ipu_conf = __raw_readl(IPU_CONF); + + switch (channel) { + case MEM_DC_SYNC: + if (params->mem_dc_sync.di > 1) { + ret = -EINVAL; + goto err; + } + + g_dc_di_assignment[1] = params->mem_dc_sync.di; + ipu_dc_init(1, params->mem_dc_sync.di, + params->mem_dc_sync.interlaced); + ipu_di_use_count[params->mem_dc_sync.di]++; + ipu_dc_use_count++; + ipu_dmfc_use_count++; + break; + case MEM_BG_SYNC: + if (params->mem_dp_bg_sync.di > 1) { + ret = -EINVAL; + goto err; + } + + g_dc_di_assignment[5] = params->mem_dp_bg_sync.di; + ipu_dp_init(channel, params->mem_dp_bg_sync.in_pixel_fmt, + params->mem_dp_bg_sync.out_pixel_fmt); + ipu_dc_init(5, params->mem_dp_bg_sync.di, + params->mem_dp_bg_sync.interlaced); + ipu_di_use_count[params->mem_dp_bg_sync.di]++; + ipu_dc_use_count++; + ipu_dp_use_count++; + ipu_dmfc_use_count++; + break; + case MEM_FG_SYNC: + ipu_dp_init(channel, params->mem_dp_fg_sync.in_pixel_fmt, + params->mem_dp_fg_sync.out_pixel_fmt); + + ipu_dc_use_count++; + ipu_dp_use_count++; + ipu_dmfc_use_count++; + break; + default: + printf("Missing channel initialization\n"); + break; + } + + /* Enable IPU sub module */ + g_channel_init_mask |= 1L << IPU_CHAN_ID(channel); + if (ipu_dc_use_count == 1) + ipu_conf |= IPU_CONF_DC_EN; + if (ipu_dp_use_count == 1) + ipu_conf |= IPU_CONF_DP_EN; + if (ipu_dmfc_use_count == 1) + ipu_conf |= IPU_CONF_DMFC_EN; + if (ipu_di_use_count[0] == 1) { + ipu_conf |= IPU_CONF_DI0_EN; + } + if (ipu_di_use_count[1] == 1) { + ipu_conf |= IPU_CONF_DI1_EN; + } + + __raw_writel(ipu_conf, IPU_CONF); + +err: + return ret; +} + +/* + * This function is called to uninitialize a logical IPU channel. + * + * @param channel Input parameter for the logical channel ID to uninit. + */ +void ipu_uninit_channel(ipu_channel_t channel) +{ + uint32_t reg; + uint32_t in_dma, out_dma = 0; + uint32_t ipu_conf; + + if ((g_channel_init_mask & (1L << IPU_CHAN_ID(channel))) == 0) { + debug("Channel already uninitialized %d\n", + IPU_CHAN_ID(channel)); + return; + } + + /* + * Make sure channel is disabled + * Get input and output dma channels + */ + in_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER); + out_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER); + + if (idma_is_set(IDMAC_CHA_EN, in_dma) || + idma_is_set(IDMAC_CHA_EN, out_dma)) { + printf( + "Channel %d is not disabled, disable first\n", + IPU_CHAN_ID(channel)); + return; + } + + ipu_conf = __raw_readl(IPU_CONF); + + /* Reset the double buffer */ + reg = __raw_readl(IPU_CHA_DB_MODE_SEL(in_dma)); + __raw_writel(reg & ~idma_mask(in_dma), IPU_CHA_DB_MODE_SEL(in_dma)); + reg = __raw_readl(IPU_CHA_DB_MODE_SEL(out_dma)); + __raw_writel(reg & ~idma_mask(out_dma), IPU_CHA_DB_MODE_SEL(out_dma)); + + switch (channel) { + case MEM_DC_SYNC: + ipu_dc_uninit(1); + ipu_di_use_count[g_dc_di_assignment[1]]--; + ipu_dc_use_count--; + ipu_dmfc_use_count--; + break; + case MEM_BG_SYNC: + ipu_dp_uninit(channel); + ipu_dc_uninit(5); + ipu_di_use_count[g_dc_di_assignment[5]]--; + ipu_dc_use_count--; + ipu_dp_use_count--; + ipu_dmfc_use_count--; + break; + case MEM_FG_SYNC: + ipu_dp_uninit(channel); + ipu_dc_use_count--; + ipu_dp_use_count--; + ipu_dmfc_use_count--; + break; + default: + break; + } + + g_channel_init_mask &= ~(1L << IPU_CHAN_ID(channel)); + + if (ipu_dc_use_count == 0) + ipu_conf &= ~IPU_CONF_DC_EN; + if (ipu_dp_use_count == 0) + ipu_conf &= ~IPU_CONF_DP_EN; + if (ipu_dmfc_use_count == 0) + ipu_conf &= ~IPU_CONF_DMFC_EN; + if (ipu_di_use_count[0] == 0) { + ipu_conf &= ~IPU_CONF_DI0_EN; + } + if (ipu_di_use_count[1] == 0) { + ipu_conf &= ~IPU_CONF_DI1_EN; + } + + __raw_writel(ipu_conf, IPU_CONF); + + if (ipu_conf == 0) { + clk_disable(g_ipu_clk); + g_ipu_clk_enabled = 0; + } + +} + +static inline void ipu_ch_param_dump(int ch) +{ +#ifdef DEBUG + struct ipu_ch_param *p = ipu_ch_param_addr(ch); + debug("ch %d word 0 - %08X %08X %08X %08X %08X\n", ch, + p->word[0].data[0], p->word[0].data[1], p->word[0].data[2], + p->word[0].data[3], p->word[0].data[4]); + debug("ch %d word 1 - %08X %08X %08X %08X %08X\n", ch, + p->word[1].data[0], p->word[1].data[1], p->word[1].data[2], + p->word[1].data[3], p->word[1].data[4]); + debug("PFS 0x%x, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 85, 4)); + debug("BPP 0x%x, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 107, 3)); + debug("NPB 0x%x\n", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 78, 7)); + + debug("FW %d, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 125, 13)); + debug("FH %d, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 0, 138, 12)); + debug("Stride %d\n", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 102, 14)); + + debug("Width0 %d+1, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 116, 3)); + debug("Width1 %d+1, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 119, 3)); + debug("Width2 %d+1, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 122, 3)); + debug("Width3 %d+1, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 125, 3)); + debug("Offset0 %d, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 128, 5)); + debug("Offset1 %d, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 133, 5)); + debug("Offset2 %d, ", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 138, 5)); + debug("Offset3 %d\n", + ipu_ch_param_read_field(ipu_ch_param_addr(ch), 1, 143, 5)); +#endif +} + +static inline void ipu_ch_params_set_packing(struct ipu_ch_param *p, + int red_width, int red_offset, + int green_width, int green_offset, + int blue_width, int blue_offset, + int alpha_width, int alpha_offset) +{ + /* Setup red width and offset */ + ipu_ch_param_set_field(p, 1, 116, 3, red_width - 1); + ipu_ch_param_set_field(p, 1, 128, 5, red_offset); + /* Setup green width and offset */ + ipu_ch_param_set_field(p, 1, 119, 3, green_width - 1); + ipu_ch_param_set_field(p, 1, 133, 5, green_offset); + /* Setup blue width and offset */ + ipu_ch_param_set_field(p, 1, 122, 3, blue_width - 1); + ipu_ch_param_set_field(p, 1, 138, 5, blue_offset); + /* Setup alpha width and offset */ + ipu_ch_param_set_field(p, 1, 125, 3, alpha_width - 1); + ipu_ch_param_set_field(p, 1, 143, 5, alpha_offset); +} + +static void ipu_ch_param_init(int ch, + uint32_t pixel_fmt, uint32_t width, + uint32_t height, uint32_t stride, + uint32_t u, uint32_t v, + uint32_t uv_stride, dma_addr_t addr0, + dma_addr_t addr1) +{ + uint32_t u_offset = 0; + uint32_t v_offset = 0; + struct ipu_ch_param params; + + memset(¶ms, 0, sizeof(params)); + + ipu_ch_param_set_field(¶ms, 0, 125, 13, width - 1); + + if ((ch == 8) || (ch == 9) || (ch == 10)) { + ipu_ch_param_set_field(¶ms, 0, 138, 12, (height / 2) - 1); + ipu_ch_param_set_field(¶ms, 1, 102, 14, (stride * 2) - 1); + } else { + ipu_ch_param_set_field(¶ms, 0, 138, 12, height - 1); + ipu_ch_param_set_field(¶ms, 1, 102, 14, stride - 1); + } + + ipu_ch_param_set_field(¶ms, 1, 0, 29, addr0 >> 3); + ipu_ch_param_set_field(¶ms, 1, 29, 29, addr1 >> 3); + + switch (pixel_fmt) { + case IPU_PIX_FMT_GENERIC: + /*Represents 8-bit Generic data */ + ipu_ch_param_set_field(¶ms, 0, 107, 3, 5); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 6); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 63); /* burst size */ + + break; + case IPU_PIX_FMT_GENERIC_32: + /*Represents 32-bit Generic data */ + break; + case IPU_PIX_FMT_RGB565: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 3); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */ + + ipu_ch_params_set_packing(¶ms, 5, 0, 6, 5, 5, 11, 8, 16); + break; + case IPU_PIX_FMT_BGR24: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 1); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 19); /* burst size */ + + ipu_ch_params_set_packing(¶ms, 8, 0, 8, 8, 8, 16, 8, 24); + break; + case IPU_PIX_FMT_RGB24: + case IPU_PIX_FMT_YUV444: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 1); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 19); /* burst size */ + + ipu_ch_params_set_packing(¶ms, 8, 16, 8, 8, 8, 0, 8, 24); + break; + case IPU_PIX_FMT_BGRA32: + case IPU_PIX_FMT_BGR32: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 0); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */ + + ipu_ch_params_set_packing(¶ms, 8, 8, 8, 16, 8, 24, 8, 0); + break; + case IPU_PIX_FMT_RGBA32: + case IPU_PIX_FMT_RGB32: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 0); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */ + + ipu_ch_params_set_packing(¶ms, 8, 24, 8, 16, 8, 8, 8, 0); + break; + case IPU_PIX_FMT_ABGR32: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 0); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 7); /* pix format */ + + ipu_ch_params_set_packing(¶ms, 8, 0, 8, 8, 8, 16, 8, 24); + break; + case IPU_PIX_FMT_UYVY: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 3); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 0xA); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); /* burst size */ + break; + case IPU_PIX_FMT_YUYV: + ipu_ch_param_set_field(¶ms, 0, 107, 3, 3); /* bits/pixel */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 0x8); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */ + break; + case IPU_PIX_FMT_YUV420P2: + case IPU_PIX_FMT_YUV420P: + ipu_ch_param_set_field(¶ms, 1, 85, 4, 2); /* pix format */ + + if (uv_stride < stride / 2) + uv_stride = stride / 2; + + u_offset = stride * height; + v_offset = u_offset + (uv_stride * height / 2); + /* burst size */ + if ((ch == 8) || (ch == 9) || (ch == 10)) { + ipu_ch_param_set_field(¶ms, 1, 78, 7, 15); + uv_stride = uv_stride*2; + } else { + ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); + } + break; + case IPU_PIX_FMT_YVU422P: + /* BPP & pixel format */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 1); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */ + + if (uv_stride < stride / 2) + uv_stride = stride / 2; + + v_offset = (v == 0) ? stride * height : v; + u_offset = (u == 0) ? v_offset + v_offset / 2 : u; + break; + case IPU_PIX_FMT_YUV422P: + /* BPP & pixel format */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 1); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */ + + if (uv_stride < stride / 2) + uv_stride = stride / 2; + + u_offset = (u == 0) ? stride * height : u; + v_offset = (v == 0) ? u_offset + u_offset / 2 : v; + break; + case IPU_PIX_FMT_NV12: + /* BPP & pixel format */ + ipu_ch_param_set_field(¶ms, 1, 85, 4, 4); /* pix format */ + ipu_ch_param_set_field(¶ms, 1, 78, 7, 31); /* burst size */ + uv_stride = stride; + u_offset = (u == 0) ? stride * height : u; + break; + default: + puts("mxc ipu: unimplemented pixel format\n"); + break; + } + + + if (uv_stride) + ipu_ch_param_set_field(¶ms, 1, 128, 14, uv_stride - 1); + + /* Get the uv offset from user when need cropping */ + if (u || v) { + u_offset = u; + v_offset = v; + } + + /* UBO and VBO are 22-bit */ + if (u_offset/8 > 0x3fffff) + puts("The value of U offset exceeds IPU limitation\n"); + if (v_offset/8 > 0x3fffff) + puts("The value of V offset exceeds IPU limitation\n"); + + ipu_ch_param_set_field(¶ms, 0, 46, 22, u_offset / 8); + ipu_ch_param_set_field(¶ms, 0, 68, 22, v_offset / 8); + + debug("initializing idma ch %d @ %p\n", ch, ipu_ch_param_addr(ch)); + memcpy(ipu_ch_param_addr(ch), ¶ms, sizeof(params)); +}; + +/* + * This function is called to initialize a buffer for logical IPU channel. + * + * @param channel Input parameter for the logical channel ID. + * + * @param type Input parameter which buffer to initialize. + * + * @param pixel_fmt Input parameter for pixel format of buffer. + * Pixel format is a FOURCC ASCII code. + * + * @param width Input parameter for width of buffer in pixels. + * + * @param height Input parameter for height of buffer in pixels. + * + * @param stride Input parameter for stride length of buffer + * in pixels. + * + * @param phyaddr_0 Input parameter buffer 0 physical address. + * + * @param phyaddr_1 Input parameter buffer 1 physical address. + * Setting this to a value other than NULL enables + * double buffering mode. + * + * @param u private u offset for additional cropping, + * zero if not used. + * + * @param v private v offset for additional cropping, + * zero if not used. + * + * @return Returns 0 on success or negative error code on fail + */ +int32_t ipu_init_channel_buffer(ipu_channel_t channel, ipu_buffer_t type, + uint32_t pixel_fmt, + uint16_t width, uint16_t height, + uint32_t stride, + dma_addr_t phyaddr_0, dma_addr_t phyaddr_1, + uint32_t u, uint32_t v) +{ + uint32_t reg; + uint32_t dma_chan; + + dma_chan = channel_2_dma(channel, type); + if (!idma_is_valid(dma_chan)) + return -EINVAL; + + if (stride < width * bytes_per_pixel(pixel_fmt)) + stride = width * bytes_per_pixel(pixel_fmt); + + if (stride % 4) { + printf( + "Stride not 32-bit aligned, stride = %d\n", stride); + return -EINVAL; + } + /* Build parameter memory data for DMA channel */ + ipu_ch_param_init(dma_chan, pixel_fmt, width, height, stride, u, v, 0, + phyaddr_0, phyaddr_1); + + if (ipu_is_dmfc_chan(dma_chan)) { + ipu_dmfc_set_wait4eot(dma_chan, width); + } + + if (idma_is_set(IDMAC_CHA_PRI, dma_chan)) + ipu_ch_param_set_high_priority(dma_chan); + + ipu_ch_param_dump(dma_chan); + + reg = __raw_readl(IPU_CHA_DB_MODE_SEL(dma_chan)); + if (phyaddr_1) + reg |= idma_mask(dma_chan); + else + reg &= ~idma_mask(dma_chan); + __raw_writel(reg, IPU_CHA_DB_MODE_SEL(dma_chan)); + + /* Reset to buffer 0 */ + __raw_writel(idma_mask(dma_chan), IPU_CHA_CUR_BUF(dma_chan)); + + return 0; +} + +/* + * This function enables a logical channel. + * + * @param channel Input parameter for the logical channel ID. + * + * @return This function returns 0 on success or negative error code on + * fail. + */ +int32_t ipu_enable_channel(ipu_channel_t channel) +{ + uint32_t reg; + uint32_t in_dma; + uint32_t out_dma; + + if (g_channel_enable_mask & (1L << IPU_CHAN_ID(channel))) { + printf("Warning: channel already enabled %d\n", + IPU_CHAN_ID(channel)); + } + + /* Get input and output dma channels */ + out_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER); + in_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER); + + if (idma_is_valid(in_dma)) { + reg = __raw_readl(IDMAC_CHA_EN(in_dma)); + __raw_writel(reg | idma_mask(in_dma), IDMAC_CHA_EN(in_dma)); + } + if (idma_is_valid(out_dma)) { + reg = __raw_readl(IDMAC_CHA_EN(out_dma)); + __raw_writel(reg | idma_mask(out_dma), IDMAC_CHA_EN(out_dma)); + } + + if ((channel == MEM_DC_SYNC) || (channel == MEM_BG_SYNC) || + (channel == MEM_FG_SYNC)) + ipu_dp_dc_enable(channel); + + g_channel_enable_mask |= 1L << IPU_CHAN_ID(channel); + + return 0; +} + +/* + * This function clear buffer ready for a logical channel. + * + * @param channel Input parameter for the logical channel ID. + * + * @param type Input parameter which buffer to clear. + * + * @param bufNum Input parameter for which buffer number clear + * ready state. + * + */ +void ipu_clear_buffer_ready(ipu_channel_t channel, ipu_buffer_t type, + uint32_t bufNum) +{ + uint32_t dma_ch = channel_2_dma(channel, type); + + if (!idma_is_valid(dma_ch)) + return; + + __raw_writel(0xF0000000, IPU_GPR); /* write one to clear */ + if (bufNum == 0) { + if (idma_is_set(IPU_CHA_BUF0_RDY, dma_ch)) { + __raw_writel(idma_mask(dma_ch), + IPU_CHA_BUF0_RDY(dma_ch)); + } + } else { + if (idma_is_set(IPU_CHA_BUF1_RDY, dma_ch)) { + __raw_writel(idma_mask(dma_ch), + IPU_CHA_BUF1_RDY(dma_ch)); + } + } + __raw_writel(0x0, IPU_GPR); /* write one to set */ +} + +/* + * This function disables a logical channel. + * + * @param channel Input parameter for the logical channel ID. + * + * @param wait_for_stop Flag to set whether to wait for channel end + * of frame or return immediately. + * + * @return This function returns 0 on success or negative error code on + * fail. + */ +int32_t ipu_disable_channel(ipu_channel_t channel) +{ + uint32_t reg; + uint32_t in_dma; + uint32_t out_dma; + + if ((g_channel_enable_mask & (1L << IPU_CHAN_ID(channel))) == 0) { + debug("Channel already disabled %d\n", + IPU_CHAN_ID(channel)); + return 0; + } + + /* Get input and output dma channels */ + out_dma = channel_2_dma(channel, IPU_OUTPUT_BUFFER); + in_dma = channel_2_dma(channel, IPU_VIDEO_IN_BUFFER); + + if ((idma_is_valid(in_dma) && + !idma_is_set(IDMAC_CHA_EN, in_dma)) + && (idma_is_valid(out_dma) && + !idma_is_set(IDMAC_CHA_EN, out_dma))) + return -EINVAL; + + if ((channel == MEM_BG_SYNC) || (channel == MEM_FG_SYNC) || + (channel == MEM_DC_SYNC)) { + ipu_dp_dc_disable(channel, 0); + } + + /* Disable DMA channel(s) */ + if (idma_is_valid(in_dma)) { + reg = __raw_readl(IDMAC_CHA_EN(in_dma)); + __raw_writel(reg & ~idma_mask(in_dma), IDMAC_CHA_EN(in_dma)); + __raw_writel(idma_mask(in_dma), IPU_CHA_CUR_BUF(in_dma)); + } + if (idma_is_valid(out_dma)) { + reg = __raw_readl(IDMAC_CHA_EN(out_dma)); + __raw_writel(reg & ~idma_mask(out_dma), IDMAC_CHA_EN(out_dma)); + __raw_writel(idma_mask(out_dma), IPU_CHA_CUR_BUF(out_dma)); + } + + g_channel_enable_mask &= ~(1L << IPU_CHAN_ID(channel)); + + /* Set channel buffers NOT to be ready */ + if (idma_is_valid(in_dma)) { + ipu_clear_buffer_ready(channel, IPU_VIDEO_IN_BUFFER, 0); + ipu_clear_buffer_ready(channel, IPU_VIDEO_IN_BUFFER, 1); + } + if (idma_is_valid(out_dma)) { + ipu_clear_buffer_ready(channel, IPU_OUTPUT_BUFFER, 0); + ipu_clear_buffer_ready(channel, IPU_OUTPUT_BUFFER, 1); + } + + return 0; +} + +uint32_t bytes_per_pixel(uint32_t fmt) +{ + switch (fmt) { + case IPU_PIX_FMT_GENERIC: /*generic data */ + case IPU_PIX_FMT_RGB332: + case IPU_PIX_FMT_YUV420P: + case IPU_PIX_FMT_YUV422P: + return 1; + break; + case IPU_PIX_FMT_RGB565: + case IPU_PIX_FMT_YUYV: + case IPU_PIX_FMT_UYVY: + return 2; + break; + case IPU_PIX_FMT_BGR24: + case IPU_PIX_FMT_RGB24: + return 3; + break; + case IPU_PIX_FMT_GENERIC_32: /*generic data */ + case IPU_PIX_FMT_BGR32: + case IPU_PIX_FMT_BGRA32: + case IPU_PIX_FMT_RGB32: + case IPU_PIX_FMT_RGBA32: + case IPU_PIX_FMT_ABGR32: + return 4; + break; + default: + return 1; + break; + } + return 0; +} + +ipu_color_space_t format_to_colorspace(uint32_t fmt) +{ + switch (fmt) { + case IPU_PIX_FMT_RGB666: + case IPU_PIX_FMT_RGB565: + case IPU_PIX_FMT_BGR24: + case IPU_PIX_FMT_RGB24: + case IPU_PIX_FMT_BGR32: + case IPU_PIX_FMT_BGRA32: + case IPU_PIX_FMT_RGB32: + case IPU_PIX_FMT_RGBA32: + case IPU_PIX_FMT_ABGR32: + case IPU_PIX_FMT_LVDS666: + case IPU_PIX_FMT_LVDS888: + return RGB; + break; + + default: + return YCbCr; + break; + } + return RGB; +} diff --git a/drivers/video/ipu_disp.c b/drivers/video/ipu_disp.c new file mode 100644 index 00000000000..11cf98d3d5a --- /dev/null +++ b/drivers/video/ipu_disp.c @@ -0,0 +1,1359 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de + * + * Linux IPU driver for MX51: + * + * (C) Copyright 2005-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* #define DEBUG */ + +#include +#include +#include +#include +#include +#include +#include "ipu.h" +#include "ipu_regs.h" + +enum csc_type_t { + RGB2YUV = 0, + YUV2RGB, + RGB2RGB, + YUV2YUV, + CSC_NONE, + CSC_NUM +}; + +struct dp_csc_param_t { + int mode; + void *coeff; +}; + +#define SYNC_WAVE 0 + +/* DC display ID assignments */ +#define DC_DISP_ID_SYNC(di) (di) +#define DC_DISP_ID_SERIAL 2 +#define DC_DISP_ID_ASYNC 3 + +int dmfc_type_setup; +static int dmfc_size_28, dmfc_size_29, dmfc_size_24, dmfc_size_27, dmfc_size_23; +int g_di1_tvout; + +extern struct clk *g_ipu_clk; +extern struct clk *g_di_clk[2]; +extern struct clk *g_pixel_clk[2]; + +extern unsigned char g_ipu_clk_enabled; +extern unsigned char g_dc_di_assignment[]; + +void ipu_dmfc_init(int dmfc_type, int first) +{ + u32 dmfc_wr_chan, dmfc_dp_chan; + + if (first) { + if (dmfc_type_setup > dmfc_type) + dmfc_type = dmfc_type_setup; + else + dmfc_type_setup = dmfc_type; + + /* disable DMFC-IC channel*/ + __raw_writel(0x2, DMFC_IC_CTRL); + } else if (dmfc_type_setup >= DMFC_HIGH_RESOLUTION_DC) { + printf("DMFC high resolution has set, will not change\n"); + return; + } else + dmfc_type_setup = dmfc_type; + + if (dmfc_type == DMFC_HIGH_RESOLUTION_DC) { + /* 1 - segment 0~3; + * 5B - segement 4, 5; + * 5F - segement 6, 7; + * 1C, 2C and 6B, 6F unused; + */ + debug("IPU DMFC DC HIGH RES: 1(0~3), 5B(4,5), 5F(6,7)\n"); + dmfc_wr_chan = 0x00000088; + dmfc_dp_chan = 0x00009694; + dmfc_size_28 = 256 * 4; + dmfc_size_29 = 0; + dmfc_size_24 = 0; + dmfc_size_27 = 128 * 4; + dmfc_size_23 = 128 * 4; + } else if (dmfc_type == DMFC_HIGH_RESOLUTION_DP) { + /* 1 - segment 0, 1; + * 5B - segement 2~5; + * 5F - segement 6,7; + * 1C, 2C and 6B, 6F unused; + */ + debug("IPU DMFC DP HIGH RES: 1(0,1), 5B(2~5), 5F(6,7)\n"); + dmfc_wr_chan = 0x00000090; + dmfc_dp_chan = 0x0000968a; + dmfc_size_28 = 128 * 4; + dmfc_size_29 = 0; + dmfc_size_24 = 0; + dmfc_size_27 = 128 * 4; + dmfc_size_23 = 256 * 4; + } else if (dmfc_type == DMFC_HIGH_RESOLUTION_ONLY_DP) { + /* 5B - segement 0~3; + * 5F - segement 4~7; + * 1, 1C, 2C and 6B, 6F unused; + */ + debug("IPU DMFC ONLY-DP HIGH RES: 5B(0~3), 5F(4~7)\n"); + dmfc_wr_chan = 0x00000000; + dmfc_dp_chan = 0x00008c88; + dmfc_size_28 = 0; + dmfc_size_29 = 0; + dmfc_size_24 = 0; + dmfc_size_27 = 256 * 4; + dmfc_size_23 = 256 * 4; + } else { + /* 1 - segment 0, 1; + * 5B - segement 4, 5; + * 5F - segement 6, 7; + * 1C, 2C and 6B, 6F unused; + */ + debug("IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)\n"); + dmfc_wr_chan = 0x00000090; + dmfc_dp_chan = 0x00009694; + dmfc_size_28 = 128 * 4; + dmfc_size_29 = 0; + dmfc_size_24 = 0; + dmfc_size_27 = 128 * 4; + dmfc_size_23 = 128 * 4; + } + __raw_writel(dmfc_wr_chan, DMFC_WR_CHAN); + __raw_writel(0x202020F6, DMFC_WR_CHAN_DEF); + __raw_writel(dmfc_dp_chan, DMFC_DP_CHAN); + /* Enable chan 5 watermark set at 5 bursts and clear at 7 bursts */ + __raw_writel(0x2020F6F6, DMFC_DP_CHAN_DEF); +} + +void ipu_dmfc_set_wait4eot(int dma_chan, int width) +{ + u32 dmfc_gen1 = __raw_readl(DMFC_GENERAL1); + + if (width >= HIGH_RESOLUTION_WIDTH) { + if (dma_chan == 23) + ipu_dmfc_init(DMFC_HIGH_RESOLUTION_DP, 0); + else if (dma_chan == 28) + ipu_dmfc_init(DMFC_HIGH_RESOLUTION_DC, 0); + } + + if (dma_chan == 23) { /*5B*/ + if (dmfc_size_23 / width > 3) + dmfc_gen1 |= 1UL << 20; + else + dmfc_gen1 &= ~(1UL << 20); + } else if (dma_chan == 24) { /*6B*/ + if (dmfc_size_24 / width > 1) + dmfc_gen1 |= 1UL << 22; + else + dmfc_gen1 &= ~(1UL << 22); + } else if (dma_chan == 27) { /*5F*/ + if (dmfc_size_27 / width > 2) + dmfc_gen1 |= 1UL << 21; + else + dmfc_gen1 &= ~(1UL << 21); + } else if (dma_chan == 28) { /*1*/ + if (dmfc_size_28 / width > 2) + dmfc_gen1 |= 1UL << 16; + else + dmfc_gen1 &= ~(1UL << 16); + } else if (dma_chan == 29) { /*6F*/ + if (dmfc_size_29 / width > 1) + dmfc_gen1 |= 1UL << 23; + else + dmfc_gen1 &= ~(1UL << 23); + } + + __raw_writel(dmfc_gen1, DMFC_GENERAL1); +} + +static void ipu_di_data_wave_config(int di, + int wave_gen, + int access_size, int component_size) +{ + u32 reg; + reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) | + (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET); + __raw_writel(reg, DI_DW_GEN(di, wave_gen)); +} + +static void ipu_di_data_pin_config(int di, int wave_gen, int di_pin, int set, + int up, int down) +{ + u32 reg; + + reg = __raw_readl(DI_DW_GEN(di, wave_gen)); + reg &= ~(0x3 << (di_pin * 2)); + reg |= set << (di_pin * 2); + __raw_writel(reg, DI_DW_GEN(di, wave_gen)); + + __raw_writel((down << 16) | up, DI_DW_SET(di, wave_gen, set)); +} + +static void ipu_di_sync_config(int di, int wave_gen, + int run_count, int run_src, + int offset_count, int offset_src, + int repeat_count, int cnt_clr_src, + int cnt_polarity_gen_en, + int cnt_polarity_clr_src, + int cnt_polarity_trigger_src, + int cnt_up, int cnt_down) +{ + u32 reg; + + if ((run_count >= 0x1000) || (offset_count >= 0x1000) || + (repeat_count >= 0x1000) || + (cnt_up >= 0x400) || (cnt_down >= 0x400)) { + printf("DI%d counters out of range.\n", di); + return; + } + + reg = (run_count << 19) | (++run_src << 16) | + (offset_count << 3) | ++offset_src; + __raw_writel(reg, DI_SW_GEN0(di, wave_gen)); + reg = (cnt_polarity_gen_en << 29) | (++cnt_clr_src << 25) | + (++cnt_polarity_trigger_src << 12) | (++cnt_polarity_clr_src << 9); + reg |= (cnt_down << 16) | cnt_up; + if (repeat_count == 0) { + /* Enable auto reload */ + reg |= 0x10000000; + } + __raw_writel(reg, DI_SW_GEN1(di, wave_gen)); + reg = __raw_readl(DI_STP_REP(di, wave_gen)); + reg &= ~(0xFFFF << (16 * ((wave_gen - 1) & 0x1))); + reg |= repeat_count << (16 * ((wave_gen - 1) & 0x1)); + __raw_writel(reg, DI_STP_REP(di, wave_gen)); +} + +static void ipu_dc_map_config(int map, int byte_num, int offset, int mask) +{ + int ptr = map * 3 + byte_num; + u32 reg; + + reg = __raw_readl(DC_MAP_CONF_VAL(ptr)); + reg &= ~(0xFFFF << (16 * (ptr & 0x1))); + reg |= ((offset << 8) | mask) << (16 * (ptr & 0x1)); + __raw_writel(reg, DC_MAP_CONF_VAL(ptr)); + + reg = __raw_readl(DC_MAP_CONF_PTR(map)); + reg &= ~(0x1F << ((16 * (map & 0x1)) + (5 * byte_num))); + reg |= ptr << ((16 * (map & 0x1)) + (5 * byte_num)); + __raw_writel(reg, DC_MAP_CONF_PTR(map)); +} + +static void ipu_dc_map_clear(int map) +{ + u32 reg = __raw_readl(DC_MAP_CONF_PTR(map)); + __raw_writel(reg & ~(0xFFFF << (16 * (map & 0x1))), + DC_MAP_CONF_PTR(map)); +} + +static void ipu_dc_write_tmpl(int word, u32 opcode, u32 operand, int map, + int wave, int glue, int sync) +{ + u32 reg; + int stop = 1; + + reg = sync; + reg |= (glue << 4); + reg |= (++wave << 11); + reg |= (++map << 15); + reg |= (operand << 20) & 0xFFF00000; + __raw_writel(reg, ipu_dc_tmpl_reg + word * 2); + + reg = (operand >> 12); + reg |= opcode << 4; + reg |= (stop << 9); + __raw_writel(reg, ipu_dc_tmpl_reg + word * 2 + 1); +} + +static void ipu_dc_link_event(int chan, int event, int addr, int priority) +{ + u32 reg; + + reg = __raw_readl(DC_RL_CH(chan, event)); + reg &= ~(0xFFFF << (16 * (event & 0x1))); + reg |= ((addr << 8) | priority) << (16 * (event & 0x1)); + __raw_writel(reg, DC_RL_CH(chan, event)); +} + +/* Y = R * 1.200 + G * 2.343 + B * .453 + 0.250; + * U = R * -.672 + G * -1.328 + B * 2.000 + 512.250.; + * V = R * 2.000 + G * -1.672 + B * -.328 + 512.250.; + */ +static const int rgb2ycbcr_coeff[5][3] = { + {0x4D, 0x96, 0x1D}, + {0x3D5, 0x3AB, 0x80}, + {0x80, 0x395, 0x3EB}, + {0x0000, 0x0200, 0x0200}, /* B0, B1, B2 */ + {0x2, 0x2, 0x2}, /* S0, S1, S2 */ +}; + +/* R = (1.164 * (Y - 16)) + (1.596 * (Cr - 128)); + * G = (1.164 * (Y - 16)) - (0.392 * (Cb - 128)) - (0.813 * (Cr - 128)); + * B = (1.164 * (Y - 16)) + (2.017 * (Cb - 128); + */ +static const int ycbcr2rgb_coeff[5][3] = { + {0x095, 0x000, 0x0CC}, + {0x095, 0x3CE, 0x398}, + {0x095, 0x0FF, 0x000}, + {0x3E42, 0x010A, 0x3DD6}, /*B0,B1,B2 */ + {0x1, 0x1, 0x1}, /*S0,S1,S2 */ +}; + +#define mask_a(a) ((u32)(a) & 0x3FF) +#define mask_b(b) ((u32)(b) & 0x3FFF) + +/* Pls keep S0, S1 and S2 as 0x2 by using this convertion */ +static int rgb_to_yuv(int n, int red, int green, int blue) +{ + int c; + c = red * rgb2ycbcr_coeff[n][0]; + c += green * rgb2ycbcr_coeff[n][1]; + c += blue * rgb2ycbcr_coeff[n][2]; + c /= 16; + c += rgb2ycbcr_coeff[3][n] * 4; + c += 8; + c /= 16; + if (c < 0) + c = 0; + if (c > 255) + c = 255; + return c; +} + +/* + * Row is for BG: RGB2YUV YUV2RGB RGB2RGB YUV2YUV CSC_NONE + * Column is for FG: RGB2YUV YUV2RGB RGB2RGB YUV2YUV CSC_NONE + */ +static struct dp_csc_param_t dp_csc_array[CSC_NUM][CSC_NUM] = { + { + {DP_COM_CONF_CSC_DEF_BOTH, &rgb2ycbcr_coeff}, + {0, 0}, + {0, 0}, + {DP_COM_CONF_CSC_DEF_BG, &rgb2ycbcr_coeff}, + {DP_COM_CONF_CSC_DEF_BG, &rgb2ycbcr_coeff} + }, + { + {0, 0}, + {DP_COM_CONF_CSC_DEF_BOTH, &ycbcr2rgb_coeff}, + {DP_COM_CONF_CSC_DEF_BG, &ycbcr2rgb_coeff}, + {0, 0}, + {DP_COM_CONF_CSC_DEF_BG, &ycbcr2rgb_coeff} + }, + { + {0, 0}, + {DP_COM_CONF_CSC_DEF_FG, &ycbcr2rgb_coeff}, + {0, 0}, + {0, 0}, + {0, 0} + }, + { + {DP_COM_CONF_CSC_DEF_FG, &rgb2ycbcr_coeff}, + {0, 0}, + {0, 0}, + {0, 0}, + {0, 0} + }, + { + {DP_COM_CONF_CSC_DEF_FG, &rgb2ycbcr_coeff}, + {DP_COM_CONF_CSC_DEF_FG, &ycbcr2rgb_coeff}, + {0, 0}, + {0, 0}, + {0, 0} + } +}; + +static enum csc_type_t fg_csc_type = CSC_NONE, bg_csc_type = CSC_NONE; +static int color_key_4rgb = 1; + +void ipu_dp_csc_setup(int dp, struct dp_csc_param_t dp_csc_param, + unsigned char srm_mode_update) +{ + u32 reg; + const int (*coeff)[5][3]; + + if (dp_csc_param.mode >= 0) { + reg = __raw_readl(DP_COM_CONF(dp)); + reg &= ~DP_COM_CONF_CSC_DEF_MASK; + reg |= dp_csc_param.mode; + __raw_writel(reg, DP_COM_CONF(dp)); + } + + coeff = dp_csc_param.coeff; + + if (coeff) { + __raw_writel(mask_a((*coeff)[0][0]) | + (mask_a((*coeff)[0][1]) << 16), DP_CSC_A_0(dp)); + __raw_writel(mask_a((*coeff)[0][2]) | + (mask_a((*coeff)[1][0]) << 16), DP_CSC_A_1(dp)); + __raw_writel(mask_a((*coeff)[1][1]) | + (mask_a((*coeff)[1][2]) << 16), DP_CSC_A_2(dp)); + __raw_writel(mask_a((*coeff)[2][0]) | + (mask_a((*coeff)[2][1]) << 16), DP_CSC_A_3(dp)); + __raw_writel(mask_a((*coeff)[2][2]) | + (mask_b((*coeff)[3][0]) << 16) | + ((*coeff)[4][0] << 30), DP_CSC_0(dp)); + __raw_writel(mask_b((*coeff)[3][1]) | ((*coeff)[4][1] << 14) | + (mask_b((*coeff)[3][2]) << 16) | + ((*coeff)[4][2] << 30), DP_CSC_1(dp)); + } + + if (srm_mode_update) { + reg = __raw_readl(IPU_SRM_PRI2) | 0x8; + __raw_writel(reg, IPU_SRM_PRI2); + } +} + +int ipu_dp_init(ipu_channel_t channel, uint32_t in_pixel_fmt, + uint32_t out_pixel_fmt) +{ + int in_fmt, out_fmt; + int dp; + int partial = 0; + uint32_t reg; + + if (channel == MEM_FG_SYNC) { + dp = DP_SYNC; + partial = 1; + } else if (channel == MEM_BG_SYNC) { + dp = DP_SYNC; + partial = 0; + } else if (channel == MEM_BG_ASYNC0) { + dp = DP_ASYNC0; + partial = 0; + } else { + return -EINVAL; + } + + in_fmt = format_to_colorspace(in_pixel_fmt); + out_fmt = format_to_colorspace(out_pixel_fmt); + + if (partial) { + if (in_fmt == RGB) { + if (out_fmt == RGB) + fg_csc_type = RGB2RGB; + else + fg_csc_type = RGB2YUV; + } else { + if (out_fmt == RGB) + fg_csc_type = YUV2RGB; + else + fg_csc_type = YUV2YUV; + } + } else { + if (in_fmt == RGB) { + if (out_fmt == RGB) + bg_csc_type = RGB2RGB; + else + bg_csc_type = RGB2YUV; + } else { + if (out_fmt == RGB) + bg_csc_type = YUV2RGB; + else + bg_csc_type = YUV2YUV; + } + } + + /* Transform color key from rgb to yuv if CSC is enabled */ + reg = __raw_readl(DP_COM_CONF(dp)); + if (color_key_4rgb && (reg & DP_COM_CONF_GWCKE) && + (((fg_csc_type == RGB2YUV) && (bg_csc_type == YUV2YUV)) || + ((fg_csc_type == YUV2YUV) && (bg_csc_type == RGB2YUV)) || + ((fg_csc_type == YUV2YUV) && (bg_csc_type == YUV2YUV)) || + ((fg_csc_type == YUV2RGB) && (bg_csc_type == YUV2RGB)))) { + int red, green, blue; + int y, u, v; + uint32_t color_key = __raw_readl(DP_GRAPH_WIND_CTRL(dp)) & + 0xFFFFFFL; + + debug("_ipu_dp_init color key 0x%x need change to yuv fmt!\n", + color_key); + + red = (color_key >> 16) & 0xFF; + green = (color_key >> 8) & 0xFF; + blue = color_key & 0xFF; + + y = rgb_to_yuv(0, red, green, blue); + u = rgb_to_yuv(1, red, green, blue); + v = rgb_to_yuv(2, red, green, blue); + color_key = (y << 16) | (u << 8) | v; + + reg = __raw_readl(DP_GRAPH_WIND_CTRL(dp)) & 0xFF000000L; + __raw_writel(reg | color_key, DP_GRAPH_WIND_CTRL(dp)); + color_key_4rgb = 0; + + debug("_ipu_dp_init color key change to yuv fmt 0x%x!\n", + color_key); + } + + ipu_dp_csc_setup(dp, dp_csc_array[bg_csc_type][fg_csc_type], 1); + + return 0; +} + +void ipu_dp_uninit(ipu_channel_t channel) +{ + int dp; + int partial = 0; + + if (channel == MEM_FG_SYNC) { + dp = DP_SYNC; + partial = 1; + } else if (channel == MEM_BG_SYNC) { + dp = DP_SYNC; + partial = 0; + } else if (channel == MEM_BG_ASYNC0) { + dp = DP_ASYNC0; + partial = 0; + } else { + return; + } + + if (partial) + fg_csc_type = CSC_NONE; + else + bg_csc_type = CSC_NONE; + + ipu_dp_csc_setup(dp, dp_csc_array[bg_csc_type][fg_csc_type], 0); +} + +void ipu_dc_init(int dc_chan, int di, unsigned char interlaced) +{ + u32 reg = 0; + + if ((dc_chan == 1) || (dc_chan == 5)) { + if (interlaced) { + ipu_dc_link_event(dc_chan, DC_EVT_NL, 0, 3); + ipu_dc_link_event(dc_chan, DC_EVT_EOL, 0, 2); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, 0, 1); + } else { + if (di) { + ipu_dc_link_event(dc_chan, DC_EVT_NL, 2, 3); + ipu_dc_link_event(dc_chan, DC_EVT_EOL, 3, 2); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, + 4, 1); + } else { + ipu_dc_link_event(dc_chan, DC_EVT_NL, 5, 3); + ipu_dc_link_event(dc_chan, DC_EVT_EOL, 6, 2); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, + 7, 1); + } + } + ipu_dc_link_event(dc_chan, DC_EVT_NF, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NFIELD, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_EOF, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_EOFIELD, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR, 0, 0); + + reg = 0x2; + reg |= DC_DISP_ID_SYNC(di) << DC_WR_CH_CONF_PROG_DISP_ID_OFFSET; + reg |= di << 2; + if (interlaced) + reg |= DC_WR_CH_CONF_FIELD_MODE; + } else if ((dc_chan == 8) || (dc_chan == 9)) { + /* async channels */ + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_0, 0x64, 1); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_1, 0x64, 1); + + reg = 0x3; + reg |= DC_DISP_ID_SERIAL << DC_WR_CH_CONF_PROG_DISP_ID_OFFSET; + } + __raw_writel(reg, DC_WR_CH_CONF(dc_chan)); + + __raw_writel(0x00000000, DC_WR_CH_ADDR(dc_chan)); + + __raw_writel(0x00000084, DC_GEN); +} + +void ipu_dc_uninit(int dc_chan) +{ + if ((dc_chan == 1) || (dc_chan == 5)) { + ipu_dc_link_event(dc_chan, DC_EVT_NL, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_EOL, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NF, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NFIELD, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_EOF, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_EOFIELD, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR, 0, 0); + } else if ((dc_chan == 8) || (dc_chan == 9)) { + ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_W_0, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_W_1, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_W_0, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_W_1, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_0, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_1, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_R_0, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_R_1, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_R_0, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_R_1, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_R_0, 0, 0); + ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_R_1, 0, 0); + } +} + +int ipu_chan_is_interlaced(ipu_channel_t channel) +{ + if (channel == MEM_DC_SYNC) + return !!(__raw_readl(DC_WR_CH_CONF_1) & + DC_WR_CH_CONF_FIELD_MODE); + else if ((channel == MEM_BG_SYNC) || (channel == MEM_FG_SYNC)) + return !!(__raw_readl(DC_WR_CH_CONF_5) & + DC_WR_CH_CONF_FIELD_MODE); + return 0; +} + +void ipu_dp_dc_enable(ipu_channel_t channel) +{ + int di; + uint32_t reg; + uint32_t dc_chan; + + if (channel == MEM_FG_SYNC) + dc_chan = 5; + if (channel == MEM_DC_SYNC) + dc_chan = 1; + else if (channel == MEM_BG_SYNC) + dc_chan = 5; + else + return; + + if (channel == MEM_FG_SYNC) { + /* Enable FG channel */ + reg = __raw_readl(DP_COM_CONF(DP_SYNC)); + __raw_writel(reg | DP_COM_CONF_FG_EN, DP_COM_CONF(DP_SYNC)); + + reg = __raw_readl(IPU_SRM_PRI2) | 0x8; + __raw_writel(reg, IPU_SRM_PRI2); + return; + } + + di = g_dc_di_assignment[dc_chan]; + + /* Make sure other DC sync channel is not assigned same DI */ + reg = __raw_readl(DC_WR_CH_CONF(6 - dc_chan)); + if ((di << 2) == (reg & DC_WR_CH_CONF_PROG_DI_ID)) { + reg &= ~DC_WR_CH_CONF_PROG_DI_ID; + reg |= di ? 0 : DC_WR_CH_CONF_PROG_DI_ID; + __raw_writel(reg, DC_WR_CH_CONF(6 - dc_chan)); + } + + reg = __raw_readl(DC_WR_CH_CONF(dc_chan)); + reg |= 4 << DC_WR_CH_CONF_PROG_TYPE_OFFSET; + __raw_writel(reg, DC_WR_CH_CONF(dc_chan)); + + clk_enable(g_pixel_clk[di]); +} + +static unsigned char dc_swap; + +void ipu_dp_dc_disable(ipu_channel_t channel, unsigned char swap) +{ + uint32_t reg; + uint32_t csc; + uint32_t dc_chan = 0; + int timeout = 50; + + dc_swap = swap; + + if (channel == MEM_DC_SYNC) { + dc_chan = 1; + } else if (channel == MEM_BG_SYNC) { + dc_chan = 5; + } else if (channel == MEM_FG_SYNC) { + /* Disable FG channel */ + dc_chan = 5; + + reg = __raw_readl(DP_COM_CONF(DP_SYNC)); + csc = reg & DP_COM_CONF_CSC_DEF_MASK; + if (csc == DP_COM_CONF_CSC_DEF_FG) + reg &= ~DP_COM_CONF_CSC_DEF_MASK; + + reg &= ~DP_COM_CONF_FG_EN; + __raw_writel(reg, DP_COM_CONF(DP_SYNC)); + + reg = __raw_readl(IPU_SRM_PRI2) | 0x8; + __raw_writel(reg, IPU_SRM_PRI2); + + timeout = 50; + + /* + * Wait for DC triple buffer to empty, + * this check is useful for tv overlay. + */ + if (g_dc_di_assignment[dc_chan] == 0) + while ((__raw_readl(DC_STAT) & 0x00000002) + != 0x00000002) { + udelay(2000); + timeout -= 2; + if (timeout <= 0) + break; + } + else if (g_dc_di_assignment[dc_chan] == 1) + while ((__raw_readl(DC_STAT) & 0x00000020) + != 0x00000020) { + udelay(2000); + timeout -= 2; + if (timeout <= 0) + break; + } + return; + } else { + return; + } + + if (dc_swap) { + /* Swap DC channel 1 and 5 settings, and disable old dc chan */ + reg = __raw_readl(DC_WR_CH_CONF(dc_chan)); + __raw_writel(reg, DC_WR_CH_CONF(6 - dc_chan)); + reg &= ~DC_WR_CH_CONF_PROG_TYPE_MASK; + reg ^= DC_WR_CH_CONF_PROG_DI_ID; + __raw_writel(reg, DC_WR_CH_CONF(dc_chan)); + } else { + timeout = 50; + + /* Wait for DC triple buffer to empty */ + if (g_dc_di_assignment[dc_chan] == 0) + while ((__raw_readl(DC_STAT) & 0x00000002) + != 0x00000002) { + udelay(2000); + timeout -= 2; + if (timeout <= 0) + break; + } + else if (g_dc_di_assignment[dc_chan] == 1) + while ((__raw_readl(DC_STAT) & 0x00000020) + != 0x00000020) { + udelay(2000); + timeout -= 2; + if (timeout <= 0) + break; + } + + reg = __raw_readl(DC_WR_CH_CONF(dc_chan)); + reg &= ~DC_WR_CH_CONF_PROG_TYPE_MASK; + __raw_writel(reg, DC_WR_CH_CONF(dc_chan)); + + reg = __raw_readl(IPU_DISP_GEN); + if (g_dc_di_assignment[dc_chan]) + reg &= ~DI1_COUNTER_RELEASE; + else + reg &= ~DI0_COUNTER_RELEASE; + __raw_writel(reg, IPU_DISP_GEN); + + /* Clock is already off because it must be done quickly, but + we need to fix the ref count */ + clk_disable(g_pixel_clk[g_dc_di_assignment[dc_chan]]); + } +} + +void ipu_init_dc_mappings(void) +{ + /* IPU_PIX_FMT_RGB24 */ + ipu_dc_map_clear(0); + ipu_dc_map_config(0, 0, 7, 0xFF); + ipu_dc_map_config(0, 1, 15, 0xFF); + ipu_dc_map_config(0, 2, 23, 0xFF); + + /* IPU_PIX_FMT_RGB666 */ + ipu_dc_map_clear(1); + ipu_dc_map_config(1, 0, 5, 0xFC); + ipu_dc_map_config(1, 1, 11, 0xFC); + ipu_dc_map_config(1, 2, 17, 0xFC); + + /* IPU_PIX_FMT_YUV444 */ + ipu_dc_map_clear(2); + ipu_dc_map_config(2, 0, 15, 0xFF); + ipu_dc_map_config(2, 1, 23, 0xFF); + ipu_dc_map_config(2, 2, 7, 0xFF); + + /* IPU_PIX_FMT_RGB565 */ + ipu_dc_map_clear(3); + ipu_dc_map_config(3, 0, 4, 0xF8); + ipu_dc_map_config(3, 1, 10, 0xFC); + ipu_dc_map_config(3, 2, 15, 0xF8); + + /* IPU_PIX_FMT_LVDS666 */ + ipu_dc_map_clear(4); + ipu_dc_map_config(4, 0, 5, 0xFC); + ipu_dc_map_config(4, 1, 13, 0xFC); + ipu_dc_map_config(4, 2, 21, 0xFC); +} + +int ipu_pixfmt_to_map(uint32_t fmt) +{ + switch (fmt) { + case IPU_PIX_FMT_GENERIC: + case IPU_PIX_FMT_RGB24: + return 0; + case IPU_PIX_FMT_RGB666: + return 1; + case IPU_PIX_FMT_YUV444: + return 2; + case IPU_PIX_FMT_RGB565: + return 3; + case IPU_PIX_FMT_LVDS666: + return 4; + } + + return -1; +} + +/* + * This function is called to adapt synchronous LCD panel to IPU restriction. + */ +void adapt_panel_to_ipu_restricitions(uint32_t *pixel_clk, + uint16_t width, uint16_t height, + uint16_t h_start_width, + uint16_t h_end_width, + uint16_t v_start_width, + uint16_t *v_end_width) +{ + if (*v_end_width < 2) { + uint16_t total_width = width + h_start_width + h_end_width; + uint16_t total_height_old = height + v_start_width + + (*v_end_width); + uint16_t total_height_new = height + v_start_width + 2; + *v_end_width = 2; + *pixel_clk = (*pixel_clk) * total_width * total_height_new / + (total_width * total_height_old); + printf("WARNING: adapt panel end blank lines\n"); + } +} + +/* + * This function is called to initialize a synchronous LCD panel. + * + * @param disp The DI the panel is attached to. + * + * @param pixel_clk Desired pixel clock frequency in Hz. + * + * @param pixel_fmt Input parameter for pixel format of buffer. + * Pixel format is a FOURCC ASCII code. + * + * @param width The width of panel in pixels. + * + * @param height The height of panel in pixels. + * + * @param hStartWidth The number of pixel clocks between the HSYNC + * signal pulse and the start of valid data. + * + * @param hSyncWidth The width of the HSYNC signal in units of pixel + * clocks. + * + * @param hEndWidth The number of pixel clocks between the end of + * valid data and the HSYNC signal for next line. + * + * @param vStartWidth The number of lines between the VSYNC + * signal pulse and the start of valid data. + * + * @param vSyncWidth The width of the VSYNC signal in units of lines + * + * @param vEndWidth The number of lines between the end of valid + * data and the VSYNC signal for next frame. + * + * @param sig Bitfield of signal polarities for LCD interface. + * + * @return This function returns 0 on success or negative error code on + * fail. + */ + +int32_t ipu_init_sync_panel(int disp, uint32_t pixel_clk, + uint16_t width, uint16_t height, + uint32_t pixel_fmt, + uint16_t h_start_width, uint16_t h_sync_width, + uint16_t h_end_width, uint16_t v_start_width, + uint16_t v_sync_width, uint16_t v_end_width, + uint32_t v_to_h_sync, ipu_di_signal_cfg_t sig) +{ + uint32_t reg; + uint32_t di_gen, vsync_cnt; + uint32_t div, rounded_pixel_clk; + uint32_t h_total, v_total; + int map; + struct clk *di_parent; + + debug("panel size = %d x %d\n", width, height); + + if ((v_sync_width == 0) || (h_sync_width == 0)) + return EINVAL; + + adapt_panel_to_ipu_restricitions(&pixel_clk, width, height, + h_start_width, h_end_width, + v_start_width, &v_end_width); + h_total = width + h_sync_width + h_start_width + h_end_width; + v_total = height + v_sync_width + v_start_width + v_end_width; + + /* Init clocking */ + debug("pixel clk = %d\n", pixel_clk); + + if (sig.ext_clk) { + if (!(g_di1_tvout && (disp == 1))) { /*not round div for tvout*/ + /* + * Set the PLL to be an even multiple + * of the pixel clock. + */ + if ((clk_get_usecount(g_pixel_clk[0]) == 0) && + (clk_get_usecount(g_pixel_clk[1]) == 0)) { + di_parent = clk_get_parent(g_di_clk[disp]); + rounded_pixel_clk = + clk_round_rate(g_pixel_clk[disp], + pixel_clk); + div = clk_get_rate(di_parent) / + rounded_pixel_clk; + if (div % 2) + div++; + if (clk_get_rate(di_parent) != div * + rounded_pixel_clk) + clk_set_rate(di_parent, + div * rounded_pixel_clk); + udelay(10000); + clk_set_rate(g_di_clk[disp], + 2 * rounded_pixel_clk); + udelay(10000); + } + } + clk_set_parent(g_pixel_clk[disp], g_di_clk[disp]); + } else { + if (clk_get_usecount(g_pixel_clk[disp]) != 0) + clk_set_parent(g_pixel_clk[disp], g_ipu_clk); + } + rounded_pixel_clk = clk_round_rate(g_pixel_clk[disp], pixel_clk); + clk_set_rate(g_pixel_clk[disp], rounded_pixel_clk); + udelay(5000); + /* Get integer portion of divider */ + div = clk_get_rate(clk_get_parent(g_pixel_clk[disp])) / + rounded_pixel_clk; + + ipu_di_data_wave_config(disp, SYNC_WAVE, div - 1, div - 1); + ipu_di_data_pin_config(disp, SYNC_WAVE, DI_PIN15, 3, 0, div * 2); + + map = ipu_pixfmt_to_map(pixel_fmt); + if (map < 0) { + debug("IPU_DISP: No MAP\n"); + return -EINVAL; + } + + di_gen = __raw_readl(DI_GENERAL(disp)); + + if (sig.interlaced) { + /* Setup internal HSYNC waveform */ + ipu_di_sync_config( + disp, /* display */ + 1, /* counter */ + h_total / 2 - 1,/* run count */ + DI_SYNC_CLK, /* run_resolution */ + 0, /* offset */ + DI_SYNC_NONE, /* offset resolution */ + 0, /* repeat count */ + DI_SYNC_NONE, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 0 /* COUNT DOWN */ + ); + + /* Field 1 VSYNC waveform */ + ipu_di_sync_config( + disp, /* display */ + 2, /* counter */ + h_total - 1, /* run count */ + DI_SYNC_CLK, /* run_resolution */ + 0, /* offset */ + DI_SYNC_NONE, /* offset resolution */ + 0, /* repeat count */ + DI_SYNC_NONE, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 4 /* COUNT DOWN */ + ); + + /* Setup internal HSYNC waveform */ + ipu_di_sync_config( + disp, /* display */ + 3, /* counter */ + v_total * 2 - 1,/* run count */ + DI_SYNC_INT_HSYNC, /* run_resolution */ + 1, /* offset */ + DI_SYNC_INT_HSYNC, /* offset resolution */ + 0, /* repeat count */ + DI_SYNC_NONE, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 4 /* COUNT DOWN */ + ); + + /* Active Field ? */ + ipu_di_sync_config( + disp, /* display */ + 4, /* counter */ + v_total / 2 - 1,/* run count */ + DI_SYNC_HSYNC, /* run_resolution */ + v_start_width, /* offset */ + DI_SYNC_HSYNC, /* offset resolution */ + 2, /* repeat count */ + DI_SYNC_VSYNC, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 0 /* COUNT DOWN */ + ); + + /* Active Line */ + ipu_di_sync_config( + disp, /* display */ + 5, /* counter */ + 0, /* run count */ + DI_SYNC_HSYNC, /* run_resolution */ + 0, /* offset */ + DI_SYNC_NONE, /* offset resolution */ + height / 2, /* repeat count */ + 4, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 0 /* COUNT DOWN */ + ); + + /* Field 0 VSYNC waveform */ + ipu_di_sync_config( + disp, /* display */ + 6, /* counter */ + v_total - 1, /* run count */ + DI_SYNC_HSYNC, /* run_resolution */ + 0, /* offset */ + DI_SYNC_NONE, /* offset resolution */ + 0, /* repeat count */ + DI_SYNC_NONE, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 0 /* COUNT DOWN */ + ); + + /* DC VSYNC waveform */ + vsync_cnt = 7; + ipu_di_sync_config( + disp, /* display */ + 7, /* counter */ + v_total / 2 - 1,/* run count */ + DI_SYNC_HSYNC, /* run_resolution */ + 9, /* offset */ + DI_SYNC_HSYNC, /* offset resolution */ + 2, /* repeat count */ + DI_SYNC_VSYNC, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 0 /* COUNT DOWN */ + ); + + /* active pixel waveform */ + ipu_di_sync_config( + disp, /* display */ + 8, /* counter */ + 0, /* run count */ + DI_SYNC_CLK, /* run_resolution */ + h_start_width, /* offset */ + DI_SYNC_CLK, /* offset resolution */ + width, /* repeat count */ + 5, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 0 /* COUNT DOWN */ + ); + + ipu_di_sync_config( + disp, /* display */ + 9, /* counter */ + v_total - 1, /* run count */ + DI_SYNC_INT_HSYNC,/* run_resolution */ + v_total / 2, /* offset */ + DI_SYNC_INT_HSYNC,/* offset resolution */ + 0, /* repeat count */ + DI_SYNC_HSYNC, /* CNT_CLR_SEL */ + 0, /* CNT_POLARITY_GEN_EN */ + DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ + DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ + 0, /* COUNT UP */ + 4 /* COUNT DOWN */ + ); + + /* set gentime select and tag sel */ + reg = __raw_readl(DI_SW_GEN1(disp, 9)); + reg &= 0x1FFFFFFF; + reg |= (3 - 1)<<29 | 0x00008000; + __raw_writel(reg, DI_SW_GEN1(disp, 9)); + + __raw_writel(v_total / 2 - 1, DI_SCR_CONF(disp)); + + /* set y_sel = 1 */ + di_gen |= 0x10000000; + di_gen |= DI_GEN_POLARITY_5; + di_gen |= DI_GEN_POLARITY_8; + } else { + /* Setup internal HSYNC waveform */ + ipu_di_sync_config(disp, 1, h_total - 1, DI_SYNC_CLK, + 0, DI_SYNC_NONE, 0, DI_SYNC_NONE, + 0, DI_SYNC_NONE, + DI_SYNC_NONE, 0, 0); + + /* Setup external (delayed) HSYNC waveform */ + ipu_di_sync_config(disp, DI_SYNC_HSYNC, h_total - 1, + DI_SYNC_CLK, div * v_to_h_sync, DI_SYNC_CLK, + 0, DI_SYNC_NONE, 1, DI_SYNC_NONE, + DI_SYNC_CLK, 0, h_sync_width * 2); + /* Setup VSYNC waveform */ + vsync_cnt = DI_SYNC_VSYNC; + ipu_di_sync_config(disp, DI_SYNC_VSYNC, v_total - 1, + DI_SYNC_INT_HSYNC, 0, DI_SYNC_NONE, 0, + DI_SYNC_NONE, 1, DI_SYNC_NONE, + DI_SYNC_INT_HSYNC, 0, v_sync_width * 2); + __raw_writel(v_total - 1, DI_SCR_CONF(disp)); + + /* Setup active data waveform to sync with DC */ + ipu_di_sync_config(disp, 4, 0, DI_SYNC_HSYNC, + v_sync_width + v_start_width, DI_SYNC_HSYNC, + height, + DI_SYNC_VSYNC, 0, DI_SYNC_NONE, + DI_SYNC_NONE, 0, 0); + ipu_di_sync_config(disp, 5, 0, DI_SYNC_CLK, + h_sync_width + h_start_width, DI_SYNC_CLK, + width, 4, 0, DI_SYNC_NONE, DI_SYNC_NONE, 0, + 0); + + /* reset all unused counters */ + __raw_writel(0, DI_SW_GEN0(disp, 6)); + __raw_writel(0, DI_SW_GEN1(disp, 6)); + __raw_writel(0, DI_SW_GEN0(disp, 7)); + __raw_writel(0, DI_SW_GEN1(disp, 7)); + __raw_writel(0, DI_SW_GEN0(disp, 8)); + __raw_writel(0, DI_SW_GEN1(disp, 8)); + __raw_writel(0, DI_SW_GEN0(disp, 9)); + __raw_writel(0, DI_SW_GEN1(disp, 9)); + + reg = __raw_readl(DI_STP_REP(disp, 6)); + reg &= 0x0000FFFF; + __raw_writel(reg, DI_STP_REP(disp, 6)); + __raw_writel(0, DI_STP_REP(disp, 7)); + __raw_writel(0, DI_STP_REP(disp, 9)); + + /* Init template microcode */ + if (disp) { + ipu_dc_write_tmpl(2, WROD(0), 0, map, SYNC_WAVE, 8, 5); + ipu_dc_write_tmpl(3, WROD(0), 0, map, SYNC_WAVE, 4, 5); + ipu_dc_write_tmpl(4, WROD(0), 0, map, SYNC_WAVE, 0, 5); + } else { + ipu_dc_write_tmpl(5, WROD(0), 0, map, SYNC_WAVE, 8, 5); + ipu_dc_write_tmpl(6, WROD(0), 0, map, SYNC_WAVE, 4, 5); + ipu_dc_write_tmpl(7, WROD(0), 0, map, SYNC_WAVE, 0, 5); + } + + if (sig.Hsync_pol) + di_gen |= DI_GEN_POLARITY_2; + if (sig.Vsync_pol) + di_gen |= DI_GEN_POLARITY_3; + + if (sig.clk_pol) + di_gen |= DI_GEN_POL_CLK; + + } + + __raw_writel(di_gen, DI_GENERAL(disp)); + + __raw_writel((--vsync_cnt << DI_VSYNC_SEL_OFFSET) | + 0x00000002, DI_SYNC_AS_GEN(disp)); + + reg = __raw_readl(DI_POL(disp)); + reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15); + if (sig.enable_pol) + reg |= DI_POL_DRDY_POLARITY_15; + if (sig.data_pol) + reg |= DI_POL_DRDY_DATA_POLARITY; + __raw_writel(reg, DI_POL(disp)); + + __raw_writel(width, DC_DISP_CONF2(DC_DISP_ID_SYNC(disp))); + + return 0; +} + +/* + * This function sets the foreground and background plane global alpha blending + * modes. This function also sets the DP graphic plane according to the + * parameter of IPUv3 DP channel. + * + * @param channel IPUv3 DP channel + * + * @param enable Boolean to enable or disable global alpha + * blending. If disabled, local blending is used. + * + * @param alpha Global alpha value. + * + * @return Returns 0 on success or negative error code on fail + */ +int32_t ipu_disp_set_global_alpha(ipu_channel_t channel, unsigned char enable, + uint8_t alpha) +{ + uint32_t reg; + uint32_t flow; + + unsigned char bg_chan; + + if (channel == MEM_BG_SYNC || channel == MEM_FG_SYNC) + flow = DP_SYNC; + else if (channel == MEM_BG_ASYNC0 || channel == MEM_FG_ASYNC0) + flow = DP_ASYNC0; + else if (channel == MEM_BG_ASYNC1 || channel == MEM_FG_ASYNC1) + flow = DP_ASYNC1; + else + return -EINVAL; + + if (channel == MEM_BG_SYNC || channel == MEM_BG_ASYNC0 || + channel == MEM_BG_ASYNC1) + bg_chan = 1; + else + bg_chan = 0; + + if (!g_ipu_clk_enabled) + clk_enable(g_ipu_clk); + + if (bg_chan) { + reg = __raw_readl(DP_COM_CONF(flow)); + __raw_writel(reg & ~DP_COM_CONF_GWSEL, DP_COM_CONF(flow)); + } else { + reg = __raw_readl(DP_COM_CONF(flow)); + __raw_writel(reg | DP_COM_CONF_GWSEL, DP_COM_CONF(flow)); + } + + if (enable) { + reg = __raw_readl(DP_GRAPH_WIND_CTRL(flow)) & 0x00FFFFFFL; + __raw_writel(reg | ((uint32_t) alpha << 24), + DP_GRAPH_WIND_CTRL(flow)); + + reg = __raw_readl(DP_COM_CONF(flow)); + __raw_writel(reg | DP_COM_CONF_GWAM, DP_COM_CONF(flow)); + } else { + reg = __raw_readl(DP_COM_CONF(flow)); + __raw_writel(reg & ~DP_COM_CONF_GWAM, DP_COM_CONF(flow)); + } + + reg = __raw_readl(IPU_SRM_PRI2) | 0x8; + __raw_writel(reg, IPU_SRM_PRI2); + + if (!g_ipu_clk_enabled) + clk_disable(g_ipu_clk); + + return 0; +} + +/* + * This function sets the transparent color key for SDC graphic plane. + * + * @param channel Input parameter for the logical channel ID. + * + * @param enable Boolean to enable or disable color key + * + * @param colorKey 24-bit RGB color for transparent color key. + * + * @return Returns 0 on success or negative error code on fail + */ +int32_t ipu_disp_set_color_key(ipu_channel_t channel, unsigned char enable, + uint32_t color_key) +{ + uint32_t reg, flow; + int y, u, v; + int red, green, blue; + + if (channel == MEM_BG_SYNC || channel == MEM_FG_SYNC) + flow = DP_SYNC; + else if (channel == MEM_BG_ASYNC0 || channel == MEM_FG_ASYNC0) + flow = DP_ASYNC0; + else if (channel == MEM_BG_ASYNC1 || channel == MEM_FG_ASYNC1) + flow = DP_ASYNC1; + else + return -EINVAL; + + if (!g_ipu_clk_enabled) + clk_enable(g_ipu_clk); + + color_key_4rgb = 1; + /* Transform color key from rgb to yuv if CSC is enabled */ + if (((fg_csc_type == RGB2YUV) && (bg_csc_type == YUV2YUV)) || + ((fg_csc_type == YUV2YUV) && (bg_csc_type == RGB2YUV)) || + ((fg_csc_type == YUV2YUV) && (bg_csc_type == YUV2YUV)) || + ((fg_csc_type == YUV2RGB) && (bg_csc_type == YUV2RGB))) { + + debug("color key 0x%x need change to yuv fmt\n", color_key); + + red = (color_key >> 16) & 0xFF; + green = (color_key >> 8) & 0xFF; + blue = color_key & 0xFF; + + y = rgb_to_yuv(0, red, green, blue); + u = rgb_to_yuv(1, red, green, blue); + v = rgb_to_yuv(2, red, green, blue); + color_key = (y << 16) | (u << 8) | v; + + color_key_4rgb = 0; + + debug("color key change to yuv fmt 0x%x\n", color_key); + } + + if (enable) { + reg = __raw_readl(DP_GRAPH_WIND_CTRL(flow)) & 0xFF000000L; + __raw_writel(reg | color_key, DP_GRAPH_WIND_CTRL(flow)); + + reg = __raw_readl(DP_COM_CONF(flow)); + __raw_writel(reg | DP_COM_CONF_GWCKE, DP_COM_CONF(flow)); + } else { + reg = __raw_readl(DP_COM_CONF(flow)); + __raw_writel(reg & ~DP_COM_CONF_GWCKE, DP_COM_CONF(flow)); + } + + reg = __raw_readl(IPU_SRM_PRI2) | 0x8; + __raw_writel(reg, IPU_SRM_PRI2); + + if (!g_ipu_clk_enabled) + clk_disable(g_ipu_clk); + + return 0; +} diff --git a/drivers/video/ipu_regs.h b/drivers/video/ipu_regs.h new file mode 100644 index 00000000000..36f07bbee33 --- /dev/null +++ b/drivers/video/ipu_regs.h @@ -0,0 +1,418 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de + * + * Linux IPU driver for MX51: + * + * (C) Copyright 2005-2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IPU_REGS_INCLUDED__ +#define __IPU_REGS_INCLUDED__ + +#define IPU_DISP0_BASE 0x00000000 +#define IPU_MCU_T_DEFAULT 8 +#define IPU_DISP1_BASE (IPU_MCU_T_DEFAULT << 25) +#define IPU_CM_REG_BASE 0x1E000000 +#define IPU_STAT_REG_BASE 0x1E000200 +#define IPU_IDMAC_REG_BASE 0x1E008000 +#define IPU_ISP_REG_BASE 0x1E010000 +#define IPU_DP_REG_BASE 0x1E018000 +#define IPU_IC_REG_BASE 0x1E020000 +#define IPU_IRT_REG_BASE 0x1E028000 +#define IPU_CSI0_REG_BASE 0x1E030000 +#define IPU_CSI1_REG_BASE 0x1E038000 +#define IPU_DI0_REG_BASE 0x1E040000 +#define IPU_DI1_REG_BASE 0x1E048000 +#define IPU_SMFC_REG_BASE 0x1E050000 +#define IPU_DC_REG_BASE 0x1E058000 +#define IPU_DMFC_REG_BASE 0x1E060000 +#define IPU_CPMEM_REG_BASE 0x1F000000 +#define IPU_LUT_REG_BASE 0x1F020000 +#define IPU_SRM_REG_BASE 0x1F040000 +#define IPU_TPM_REG_BASE 0x1F060000 +#define IPU_DC_TMPL_REG_BASE 0x1F080000 +#define IPU_ISP_TBPR_REG_BASE 0x1F0C0000 +#define IPU_VDI_REG_BASE 0x1E068000 + + +extern u32 *ipu_dc_tmpl_reg; + +#define DC_EVT_NF 0 +#define DC_EVT_NL 1 +#define DC_EVT_EOF 2 +#define DC_EVT_NFIELD 3 +#define DC_EVT_EOL 4 +#define DC_EVT_EOFIELD 5 +#define DC_EVT_NEW_ADDR 6 +#define DC_EVT_NEW_CHAN 7 +#define DC_EVT_NEW_DATA 8 + +#define DC_EVT_NEW_ADDR_W_0 0 +#define DC_EVT_NEW_ADDR_W_1 1 +#define DC_EVT_NEW_CHAN_W_0 2 +#define DC_EVT_NEW_CHAN_W_1 3 +#define DC_EVT_NEW_DATA_W_0 4 +#define DC_EVT_NEW_DATA_W_1 5 +#define DC_EVT_NEW_ADDR_R_0 6 +#define DC_EVT_NEW_ADDR_R_1 7 +#define DC_EVT_NEW_CHAN_R_0 8 +#define DC_EVT_NEW_CHAN_R_1 9 +#define DC_EVT_NEW_DATA_R_0 10 +#define DC_EVT_NEW_DATA_R_1 11 + +/* Software reset for ipu */ +#define SW_IPU_RST 8 + +enum { + IPU_CONF_DP_EN = 0x00000020, + IPU_CONF_DI0_EN = 0x00000040, + IPU_CONF_DI1_EN = 0x00000080, + IPU_CONF_DMFC_EN = 0x00000400, + IPU_CONF_DC_EN = 0x00000200, + + DI0_COUNTER_RELEASE = 0x01000000, + DI1_COUNTER_RELEASE = 0x02000000, + + DI_DW_GEN_ACCESS_SIZE_OFFSET = 24, + DI_DW_GEN_COMPONENT_SIZE_OFFSET = 16, + + DI_GEN_DI_CLK_EXT = 0x100000, + DI_GEN_POLARITY_1 = 0x00000001, + DI_GEN_POLARITY_2 = 0x00000002, + DI_GEN_POLARITY_3 = 0x00000004, + DI_GEN_POLARITY_4 = 0x00000008, + DI_GEN_POLARITY_5 = 0x00000010, + DI_GEN_POLARITY_6 = 0x00000020, + DI_GEN_POLARITY_7 = 0x00000040, + DI_GEN_POLARITY_8 = 0x00000080, + DI_GEN_POL_CLK = 0x20000, + + DI_POL_DRDY_DATA_POLARITY = 0x00000080, + DI_POL_DRDY_POLARITY_15 = 0x00000010, + DI_VSYNC_SEL_OFFSET = 13, + + DC_WR_CH_CONF_FIELD_MODE = 0x00000200, + DC_WR_CH_CONF_PROG_TYPE_OFFSET = 5, + DC_WR_CH_CONF_PROG_TYPE_MASK = 0x000000E0, + DC_WR_CH_CONF_PROG_DI_ID = 0x00000004, + DC_WR_CH_CONF_PROG_DISP_ID_OFFSET = 3, + DC_WR_CH_CONF_PROG_DISP_ID_MASK = 0x00000018, + + DP_COM_CONF_FG_EN = 0x00000001, + DP_COM_CONF_GWSEL = 0x00000002, + DP_COM_CONF_GWAM = 0x00000004, + DP_COM_CONF_GWCKE = 0x00000008, + DP_COM_CONF_CSC_DEF_MASK = 0x00000300, + DP_COM_CONF_CSC_DEF_OFFSET = 8, + DP_COM_CONF_CSC_DEF_FG = 0x00000300, + DP_COM_CONF_CSC_DEF_BG = 0x00000200, + DP_COM_CONF_CSC_DEF_BOTH = 0x00000100, + DP_COM_CONF_GAMMA_EN = 0x00001000, + DP_COM_CONF_GAMMA_YUV_EN = 0x00002000, +}; + +enum di_pins { + DI_PIN11 = 0, + DI_PIN12 = 1, + DI_PIN13 = 2, + DI_PIN14 = 3, + DI_PIN15 = 4, + DI_PIN16 = 5, + DI_PIN17 = 6, + DI_PIN_CS = 7, + + DI_PIN_SER_CLK = 0, + DI_PIN_SER_RS = 1, +}; + +enum di_sync_wave { + DI_SYNC_NONE = -1, + DI_SYNC_CLK = 0, + DI_SYNC_INT_HSYNC = 1, + DI_SYNC_HSYNC = 2, + DI_SYNC_VSYNC = 3, + DI_SYNC_DE = 5, +}; + +struct ipu_cm { + u32 conf; + u32 sisg_ctrl0; + u32 sisg_ctrl1; + u32 sisg_set[6]; + u32 sisg_clear[6]; + u32 int_ctrl[15]; + u32 sdma_event[10]; + u32 srm_pri1; + u32 srm_pri2; + u32 fs_proc_flow[3]; + u32 fs_disp_flow[2]; + u32 skip; + u32 disp_alt_conf; + u32 disp_gen; + u32 disp_alt[4]; + u32 snoop; + u32 mem_rst; + u32 pm; + u32 gpr; + u32 reserved0[26]; + u32 ch_db_mode_sel[2]; + u32 reserved1[16]; + u32 alt_ch_db_mode_sel[2]; + u32 reserved2[2]; + u32 ch_trb_mode_sel[2]; +}; + +struct ipu_idmac { + u32 conf; + u32 ch_en[2]; + u32 sep_alpha; + u32 alt_sep_alpha; + u32 ch_pri[2]; + u32 wm_en[2]; + u32 lock_en[2]; + u32 sub_addr[5]; + u32 bndm_en[2]; + u32 sc_cord[2]; + u32 reserved[45]; + u32 ch_busy[2]; +}; + +struct ipu_com_async { + u32 com_conf_async; + u32 graph_wind_ctrl_async; + u32 fg_pos_async; + u32 cur_pos_async; + u32 cur_map_async; + u32 gamma_c_async[8]; + u32 gamma_s_async[4]; + u32 dp_csca_async[4]; + u32 dp_csc_async[2]; +}; + +struct ipu_dp { + u32 com_conf_sync; + u32 graph_wind_ctrl_sync; + u32 fg_pos_sync; + u32 cur_pos_sync; + u32 cur_map_sync; + u32 gamma_c_sync[8]; + u32 gamma_s_sync[4]; + u32 csca_sync[4]; + u32 csc_sync[2]; + u32 cur_pos_alt; + struct ipu_com_async async[2]; +}; + +struct ipu_di { + u32 general; + u32 bs_clkgen0; + u32 bs_clkgen1; + u32 sw_gen0[9]; + u32 sw_gen1[9]; + u32 sync_as; + u32 dw_gen[12]; + u32 dw_set[48]; + u32 stp_rep[4]; + u32 stp_rep9; + u32 ser_conf; + u32 ssc; + u32 pol; + u32 aw0; + u32 aw1; + u32 scr_conf; + u32 stat; +}; + +struct ipu_stat { + u32 int_stat[15]; + u32 cur_buf[2]; + u32 alt_cur_buf_0; + u32 alt_cur_buf_1; + u32 srm_stat; + u32 proc_task_stat; + u32 disp_task_stat; + u32 triple_cur_buf[4]; + u32 ch_buf0_rdy[2]; + u32 ch_buf1_rdy[2]; + u32 alt_ch_buf0_rdy[2]; + u32 alt_ch_buf1_rdy[2]; + u32 ch_buf2_rdy[2]; +}; + +struct ipu_dc_ch { + u32 wr_ch_conf; + u32 wr_ch_addr; + u32 rl[5]; +}; + +struct ipu_dc { + struct ipu_dc_ch dc_ch0_1_2[3]; + u32 cmd_ch_conf_3; + u32 cmd_ch_conf_4; + struct ipu_dc_ch dc_ch5_6[2]; + struct ipu_dc_ch dc_ch8; + u32 rl6_ch_8; + struct ipu_dc_ch dc_ch9; + u32 rl6_ch_9; + u32 gen; + u32 disp_conf1[4]; + u32 disp_conf2[4]; + u32 di0_conf[2]; + u32 di1_conf[2]; + u32 dc_map_ptr[15]; + u32 dc_map_val[12]; + u32 udge[16]; + u32 lla[2]; + u32 r_lla[2]; + u32 wr_ch_addr_5_alt; + u32 stat; +}; + +struct ipu_dmfc { + u32 rd_chan; + u32 wr_chan; + u32 wr_chan_def; + u32 dp_chan; + u32 dp_chan_def; + u32 general[2]; + u32 ic_ctrl; + u32 wr_chan_alt; + u32 wr_chan_def_alt; + u32 general1_alt; + u32 stat; +}; + +#define IPU_CM_REG ((struct ipu_cm *)(IPU_CTRL_BASE_ADDR + \ + IPU_CM_REG_BASE)) +#define IPU_CONF (&IPU_CM_REG->conf) +#define IPU_SRM_PRI1 (&IPU_CM_REG->srm_pri1) +#define IPU_SRM_PRI2 (&IPU_CM_REG->srm_pri2) +#define IPU_FS_PROC_FLOW1 (&IPU_CM_REG->fs_proc_flow[0]) +#define IPU_FS_PROC_FLOW2 (&IPU_CM_REG->fs_proc_flow[1]) +#define IPU_FS_PROC_FLOW3 (&IPU_CM_REG->fs_proc_flow[2]) +#define IPU_FS_DISP_FLOW1 (&IPU_CM_REG->fs_disp_flow[0]) +#define IPU_DISP_GEN (&IPU_CM_REG->disp_gen) +#define IPU_MEM_RST (&IPU_CM_REG->mem_rst) +#define IPU_GPR (&IPU_CM_REG->gpr) +#define IPU_CHA_DB_MODE_SEL(ch) (&IPU_CM_REG->ch_db_mode_sel[ch / 32]) + +#define IPU_STAT ((struct ipu_stat *)(IPU_CTRL_BASE_ADDR + \ + IPU_STAT_REG_BASE)) +#define IPU_CHA_CUR_BUF(ch) (&IPU_STAT->cur_buf[ch / 32]) +#define IPU_CHA_BUF0_RDY(ch) (&IPU_STAT->ch_buf0_rdy[ch / 32]) +#define IPU_CHA_BUF1_RDY(ch) (&IPU_STAT->ch_buf1_rdy[ch / 32]) + +#define IPU_INT_CTRL(n) (&IPU_CM_REG->int_ctrl[(n) - 1]) + +#define IDMAC_REG ((struct ipu_idmac *)(IPU_CTRL_BASE_ADDR + \ + IPU_IDMAC_REG_BASE)) +#define IDMAC_CONF (&IDMAC_REG->conf) +#define IDMAC_CHA_EN(ch) (&IDMAC_REG->ch_en[ch / 32]) +#define IDMAC_CHA_PRI(ch) (&IDMAC_REG->ch_pri[ch / 32]) + +#define DI_REG(di) ((struct ipu_di *)(IPU_CTRL_BASE_ADDR + \ + ((di == 1) ? IPU_DI1_REG_BASE : \ + IPU_DI0_REG_BASE))) +#define DI_GENERAL(di) (&DI_REG(di)->general) +#define DI_BS_CLKGEN0(di) (&DI_REG(di)->bs_clkgen0) +#define DI_BS_CLKGEN1(di) (&DI_REG(di)->bs_clkgen1) + +#define DI_SW_GEN0(di, gen) (&DI_REG(di)->sw_gen0[gen - 1]) +#define DI_SW_GEN1(di, gen) (&DI_REG(di)->sw_gen1[gen - 1]) +#define DI_STP_REP(di, gen) (&DI_REG(di)->stp_rep[(gen - 1) / 2]) +#define DI_SYNC_AS_GEN(di) (&DI_REG(di)->sync_as) +#define DI_DW_GEN(di, gen) (&DI_REG(di)->dw_gen[gen]) +#define DI_DW_SET(di, gen, set) (&DI_REG(di)->dw_set[gen + 12 * set]) +#define DI_POL(di) (&DI_REG(di)->pol) +#define DI_SCR_CONF(di) (&DI_REG(di)->scr_conf) + +#define DMFC_REG ((struct ipu_dmfc *)(IPU_CTRL_BASE_ADDR + \ + IPU_DMFC_REG_BASE)) +#define DMFC_WR_CHAN (&DMFC_REG->wr_chan) +#define DMFC_WR_CHAN_DEF (&DMFC_REG->wr_chan_def) +#define DMFC_DP_CHAN (&DMFC_REG->dp_chan) +#define DMFC_DP_CHAN_DEF (&DMFC_REG->dp_chan_def) +#define DMFC_GENERAL1 (&DMFC_REG->general[0]) +#define DMFC_IC_CTRL (&DMFC_REG->ic_ctrl) + + +#define DC_REG ((struct ipu_dc *)(IPU_CTRL_BASE_ADDR + \ + IPU_DC_REG_BASE)) +#define DC_MAP_CONF_PTR(n) (&DC_REG->dc_map_ptr[n / 2]) +#define DC_MAP_CONF_VAL(n) (&DC_REG->dc_map_val[n / 2]) + + +static inline struct ipu_dc_ch *dc_ch_offset(int ch) +{ + switch (ch) { + case 0: + case 1: + case 2: + return &DC_REG->dc_ch0_1_2[ch]; + case 5: + case 6: + return &DC_REG->dc_ch5_6[ch - 5]; + case 8: + return &DC_REG->dc_ch8; + case 9: + return &DC_REG->dc_ch9; + default: + printf("%s: invalid channel %d\n", __func__, ch); + return NULL; + } + +} + +#define DC_RL_CH(ch, evt) (&dc_ch_offset(ch)->rl[evt / 2]) + +#define DC_WR_CH_CONF(ch) (&dc_ch_offset(ch)->wr_ch_conf) +#define DC_WR_CH_ADDR(ch) (&dc_ch_offset(ch)->wr_ch_addr) + +#define DC_WR_CH_CONF_1 DC_WR_CH_CONF(1) +#define DC_WR_CH_CONF_5 DC_WR_CH_CONF(5) + +#define DC_GEN (&DC_REG->gen) +#define DC_DISP_CONF2(disp) (&DC_REG->disp_conf2[disp]) +#define DC_STAT (&DC_REG->stat) + +#define DP_SYNC 0 +#define DP_ASYNC0 0x60 +#define DP_ASYNC1 0xBC + +#define DP_REG ((struct ipu_dp *)(IPU_CTRL_BASE_ADDR + \ + IPU_DP_REG_BASE)) +#define DP_COM_CONF(flow) (&DP_REG->com_conf_sync) +#define DP_GRAPH_WIND_CTRL(flow) (&DP_REG->graph_wind_ctrl_sync) +#define DP_CSC_A_0(flow) (&DP_REG->csca_sync[0]) +#define DP_CSC_A_1(flow) (&DP_REG->csca_sync[1]) +#define DP_CSC_A_2(flow) (&DP_REG->csca_sync[2]) +#define DP_CSC_A_3(flow) (&DP_REG->csca_sync[3]) + +#define DP_CSC_0(flow) (&DP_REG->csc_sync[0]) +#define DP_CSC_1(flow) (&DP_REG->csc_sync[1]) + +/* DC template opcodes */ +#define WROD(lf) (0x18 | (lf << 1)) + +#endif From 5dda7945d18077db81eb0cfdc2f9d4525e6b77b1 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Wed, 13 Oct 2010 12:17:14 +0200 Subject: [PATCH 022/116] MX51: Add video support Add framebuffer driver for the MX51 processor working on the IPUv3 internal graphic processor. The port is based on the driver found in the kernel delivered by Freescale as part of i.MX BSP: [kernel 2.6.31 commit cc4fe714041805997b601fe8e5dd585d8a99297f] [agust@denx.de: some style fixes and dead code removal] Signed-off-by: Stefano Babic Signed-off-by: Anatolij Gustschin --- drivers/video/Makefile | 1 + drivers/video/mxc_ipuv3_fb.c | 642 +++++++++++++++++++++++++++++++++++ drivers/video/mxcfb.h | 68 ++++ 3 files changed, 711 insertions(+) create mode 100644 drivers/video/mxc_ipuv3_fb.c create mode 100644 drivers/video/mxcfb.h diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 4be82e73960..5b7b2612686 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -34,6 +34,7 @@ COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o COBJS-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o +COBJS-$(CONFIG_VIDEO_MX5) += mxc_ipuv3_fb.o ipu_common.o ipu_disp.o COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o COBJS-$(CONFIG_SED156X) += sed156x.o COBJS-$(CONFIG_VIDEO_SM501) += sm501.o diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c new file mode 100644 index 00000000000..a66981c27c9 --- /dev/null +++ b/drivers/video/mxc_ipuv3_fb.c @@ -0,0 +1,642 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de + * + * MX51 Linux framebuffer: + * + * (C) Copyright 2004-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* #define DEBUG */ +#include +#include +#include +#include +#include +#include +#include +#include +#include "videomodes.h" +#include "ipu.h" +#include "mxcfb.h" + +DECLARE_GLOBAL_DATA_PTR; + +void *lcd_base; /* Start of framebuffer memory */ +void *lcd_console_address; /* Start of console buffer */ + +int lcd_line_length; +int lcd_color_fg; +int lcd_color_bg; + +short console_col; +short console_row; + +vidinfo_t panel_info; + +static int mxcfb_map_video_memory(struct fb_info *fbi); +static int mxcfb_unmap_video_memory(struct fb_info *fbi); + +void lcd_initcolregs(void) +{ +} + +void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) +{ +} + +void lcd_disable(void) +{ +} + +void lcd_panel_disable(void) +{ +} + +void fb_videomode_to_var(struct fb_var_screeninfo *var, + const struct fb_videomode *mode) +{ + var->xres = mode->xres; + var->yres = mode->yres; + var->xres_virtual = mode->xres; + var->yres_virtual = mode->yres; + var->xoffset = 0; + var->yoffset = 0; + var->pixclock = mode->pixclock; + var->left_margin = mode->left_margin; + var->right_margin = mode->right_margin; + var->upper_margin = mode->upper_margin; + var->lower_margin = mode->lower_margin; + var->hsync_len = mode->hsync_len; + var->vsync_len = mode->vsync_len; + var->sync = mode->sync; + var->vmode = mode->vmode & FB_VMODE_MASK; +} + +/* + * Structure containing the MXC specific framebuffer information. + */ +struct mxcfb_info { + int blank; + ipu_channel_t ipu_ch; + int ipu_di; + u32 ipu_di_pix_fmt; + unsigned char overlay; + unsigned char alpha_chan_en; + dma_addr_t alpha_phy_addr0; + dma_addr_t alpha_phy_addr1; + void *alpha_virt_addr0; + void *alpha_virt_addr1; + uint32_t alpha_mem_len; + uint32_t cur_ipu_buf; + uint32_t cur_ipu_alpha_buf; + + u32 pseudo_palette[16]; +}; + +enum { + BOTH_ON, + SRC_ON, + TGT_ON, + BOTH_OFF +}; + +static unsigned long default_bpp = 16; +static unsigned char g_dp_in_use; +static struct fb_info *mxcfb_info[3]; +static int ext_clk_used; + +static uint32_t bpp_to_pixfmt(struct fb_info *fbi) +{ + uint32_t pixfmt = 0; + + debug("bpp_to_pixfmt: %d\n", fbi->var.bits_per_pixel); + + if (fbi->var.nonstd) + return fbi->var.nonstd; + + switch (fbi->var.bits_per_pixel) { + case 24: + pixfmt = IPU_PIX_FMT_BGR24; + break; + case 32: + pixfmt = IPU_PIX_FMT_BGR32; + break; + case 16: + pixfmt = IPU_PIX_FMT_RGB565; + break; + } + return pixfmt; +} + +/* + * Set fixed framebuffer parameters based on variable settings. + * + * @param info framebuffer information pointer + */ +static int mxcfb_set_fix(struct fb_info *info) +{ + struct fb_fix_screeninfo *fix = &info->fix; + struct fb_var_screeninfo *var = &info->var; + + fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; + + fix->type = FB_TYPE_PACKED_PIXELS; + fix->accel = FB_ACCEL_NONE; + fix->visual = FB_VISUAL_TRUECOLOR; + fix->xpanstep = 1; + fix->ypanstep = 1; + + return 0; +} + +static int setup_disp_channel1(struct fb_info *fbi) +{ + ipu_channel_params_t params; + struct mxcfb_info *mxc_fbi = (struct mxcfb_info *)fbi->par; + + memset(¶ms, 0, sizeof(params)); + params.mem_dp_bg_sync.di = mxc_fbi->ipu_di; + + debug("%s called\n", __func__); + /* + * Assuming interlaced means yuv output, below setting also + * valid for mem_dc_sync. FG should have the same vmode as BG. + */ + if (fbi->var.vmode & FB_VMODE_INTERLACED) { + params.mem_dp_bg_sync.interlaced = 1; + params.mem_dp_bg_sync.out_pixel_fmt = + IPU_PIX_FMT_YUV444; + } else { + if (mxc_fbi->ipu_di_pix_fmt) { + params.mem_dp_bg_sync.out_pixel_fmt = + mxc_fbi->ipu_di_pix_fmt; + } else { + params.mem_dp_bg_sync.out_pixel_fmt = + IPU_PIX_FMT_RGB666; + } + } + params.mem_dp_bg_sync.in_pixel_fmt = bpp_to_pixfmt(fbi); + if (mxc_fbi->alpha_chan_en) + params.mem_dp_bg_sync.alpha_chan_en = 1; + + ipu_init_channel(mxc_fbi->ipu_ch, ¶ms); + + return 0; +} + +static int setup_disp_channel2(struct fb_info *fbi) +{ + int retval = 0; + struct mxcfb_info *mxc_fbi = (struct mxcfb_info *)fbi->par; + + mxc_fbi->cur_ipu_buf = 1; + if (mxc_fbi->alpha_chan_en) + mxc_fbi->cur_ipu_alpha_buf = 1; + + fbi->var.xoffset = fbi->var.yoffset = 0; + + debug("%s: %x %d %d %d %lx %lx\n", + __func__, + mxc_fbi->ipu_ch, + fbi->var.xres, + fbi->var.yres, + fbi->fix.line_length, + fbi->fix.smem_start, + fbi->fix.smem_start + + (fbi->fix.line_length * fbi->var.yres)); + + retval = ipu_init_channel_buffer(mxc_fbi->ipu_ch, IPU_INPUT_BUFFER, + bpp_to_pixfmt(fbi), + fbi->var.xres, fbi->var.yres, + fbi->fix.line_length, + fbi->fix.smem_start + + (fbi->fix.line_length * fbi->var.yres), + fbi->fix.smem_start, + 0, 0); + if (retval) + printf("ipu_init_channel_buffer error %d\n", retval); + + return retval; +} + +/* + * Set framebuffer parameters and change the operating mode. + * + * @param info framebuffer information pointer + */ +static int mxcfb_set_par(struct fb_info *fbi) +{ + int retval = 0; + u32 mem_len; + ipu_di_signal_cfg_t sig_cfg; + struct mxcfb_info *mxc_fbi = (struct mxcfb_info *)fbi->par; + uint32_t out_pixel_fmt; + + ipu_disable_channel(mxc_fbi->ipu_ch); + ipu_uninit_channel(mxc_fbi->ipu_ch); + mxcfb_set_fix(fbi); + + mem_len = fbi->var.yres_virtual * fbi->fix.line_length; + if (!fbi->fix.smem_start || (mem_len > fbi->fix.smem_len)) { + if (fbi->fix.smem_start) + mxcfb_unmap_video_memory(fbi); + + if (mxcfb_map_video_memory(fbi) < 0) + return -ENOMEM; + } + + setup_disp_channel1(fbi); + + memset(&sig_cfg, 0, sizeof(sig_cfg)); + if (fbi->var.vmode & FB_VMODE_INTERLACED) { + sig_cfg.interlaced = 1; + out_pixel_fmt = IPU_PIX_FMT_YUV444; + } else { + if (mxc_fbi->ipu_di_pix_fmt) + out_pixel_fmt = mxc_fbi->ipu_di_pix_fmt; + else + out_pixel_fmt = IPU_PIX_FMT_RGB666; + } + if (fbi->var.vmode & FB_VMODE_ODD_FLD_FIRST) /* PAL */ + sig_cfg.odd_field_first = 1; + if ((fbi->var.sync & FB_SYNC_EXT) || ext_clk_used) + sig_cfg.ext_clk = 1; + if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT) + sig_cfg.Hsync_pol = 1; + if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT) + sig_cfg.Vsync_pol = 1; + if (!(fbi->var.sync & FB_SYNC_CLK_LAT_FALL)) + sig_cfg.clk_pol = 1; + if (fbi->var.sync & FB_SYNC_DATA_INVERT) + sig_cfg.data_pol = 1; + if (!(fbi->var.sync & FB_SYNC_OE_LOW_ACT)) + sig_cfg.enable_pol = 1; + if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN) + sig_cfg.clkidle_en = 1; + + debug("pixclock = %ul Hz\n", + (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); + + if (ipu_init_sync_panel(mxc_fbi->ipu_di, + (PICOS2KHZ(fbi->var.pixclock)) * 1000UL, + fbi->var.xres, fbi->var.yres, + out_pixel_fmt, + fbi->var.left_margin, + fbi->var.hsync_len, + fbi->var.right_margin, + fbi->var.upper_margin, + fbi->var.vsync_len, + fbi->var.lower_margin, + 0, sig_cfg) != 0) { + puts("mxcfb: Error initializing panel.\n"); + return -EINVAL; + } + + retval = setup_disp_channel2(fbi); + if (retval) + return retval; + + if (mxc_fbi->blank == FB_BLANK_UNBLANK) + ipu_enable_channel(mxc_fbi->ipu_ch); + + return retval; +} + +/* + * Check framebuffer variable parameters and adjust to valid values. + * + * @param var framebuffer variable parameters + * + * @param info framebuffer information pointer + */ +static int mxcfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + u32 vtotal; + u32 htotal; + + if (var->xres_virtual < var->xres) + var->xres_virtual = var->xres; + if (var->yres_virtual < var->yres) + var->yres_virtual = var->yres; + + if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && + (var->bits_per_pixel != 16) && (var->bits_per_pixel != 8)) + var->bits_per_pixel = default_bpp; + + switch (var->bits_per_pixel) { + case 8: + var->red.length = 3; + var->red.offset = 5; + var->red.msb_right = 0; + + var->green.length = 3; + var->green.offset = 2; + var->green.msb_right = 0; + + var->blue.length = 2; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 16: + var->red.length = 5; + var->red.offset = 11; + var->red.msb_right = 0; + + var->green.length = 6; + var->green.offset = 5; + var->green.msb_right = 0; + + var->blue.length = 5; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 24: + var->red.length = 8; + var->red.offset = 16; + var->red.msb_right = 0; + + var->green.length = 8; + var->green.offset = 8; + var->green.msb_right = 0; + + var->blue.length = 8; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 32: + var->red.length = 8; + var->red.offset = 16; + var->red.msb_right = 0; + + var->green.length = 8; + var->green.offset = 8; + var->green.msb_right = 0; + + var->blue.length = 8; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 8; + var->transp.offset = 24; + var->transp.msb_right = 0; + break; + } + + if (var->pixclock < 1000) { + htotal = var->xres + var->right_margin + var->hsync_len + + var->left_margin; + vtotal = var->yres + var->lower_margin + var->vsync_len + + var->upper_margin; + var->pixclock = (vtotal * htotal * 6UL) / 100UL; + var->pixclock = KHZ2PICOS(var->pixclock); + printf("pixclock set for 60Hz refresh = %u ps\n", + var->pixclock); + } + + var->height = -1; + var->width = -1; + var->grayscale = 0; + + return 0; +} + +static int mxcfb_map_video_memory(struct fb_info *fbi) +{ + if (fbi->fix.smem_len < fbi->var.yres_virtual * fbi->fix.line_length) { + fbi->fix.smem_len = fbi->var.yres_virtual * + fbi->fix.line_length; + } + + fbi->screen_base = (char *)lcd_base; + fbi->fix.smem_start = (unsigned long)lcd_base; + if (fbi->screen_base == 0) { + puts("Unable to allocate framebuffer memory\n"); + fbi->fix.smem_len = 0; + fbi->fix.smem_start = 0; + return -EBUSY; + } + + debug("allocated fb @ paddr=0x%08X, size=%d.\n", + (uint32_t) fbi->fix.smem_start, fbi->fix.smem_len); + + fbi->screen_size = fbi->fix.smem_len; + + /* Clear the screen */ + memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); + + return 0; +} + +static int mxcfb_unmap_video_memory(struct fb_info *fbi) +{ + fbi->screen_base = 0; + fbi->fix.smem_start = 0; + fbi->fix.smem_len = 0; + return 0; +} + +/* + * Initializes the framebuffer information pointer. After allocating + * sufficient memory for the framebuffer structure, the fields are + * filled with custom information passed in from the configurable + * structures. This includes information such as bits per pixel, + * color maps, screen width/height and RGBA offsets. + * + * @return Framebuffer structure initialized with our information + */ +static struct fb_info *mxcfb_init_fbinfo(void) +{ +#define BYTES_PER_LONG 4 +#define PADDING (BYTES_PER_LONG - (sizeof(struct fb_info) % BYTES_PER_LONG)) + struct fb_info *fbi; + struct mxcfb_info *mxcfbi; + char *p; + int size = sizeof(struct mxcfb_info) + PADDING + + sizeof(struct fb_info); + + debug("%s: %d %d %d %d\n", + __func__, + PADDING, + size, + sizeof(struct mxcfb_info), + sizeof(struct fb_info)); + /* + * Allocate sufficient memory for the fb structure + */ + + p = malloc(size); + if (!p) + return NULL; + + memset(p, 0, size); + + fbi = (struct fb_info *)p; + fbi->par = p + sizeof(struct fb_info) + PADDING; + + mxcfbi = (struct mxcfb_info *)fbi->par; + debug("Framebuffer structures at: fbi=0x%x mxcfbi=0x%x\n", + (unsigned int)fbi, (unsigned int)mxcfbi); + + fbi->var.activate = FB_ACTIVATE_NOW; + + fbi->flags = FBINFO_FLAG_DEFAULT; + fbi->pseudo_palette = mxcfbi->pseudo_palette; + + return fbi; +} + +/* + * Probe routine for the framebuffer driver. It is called during the + * driver binding process. The following functions are performed in + * this routine: Framebuffer initialization, Memory allocation and + * mapping, Framebuffer registration, IPU initialization. + * + * @return Appropriate error code to the kernel common code + */ +static int mxcfb_probe(u32 interface_pix_fmt, struct fb_videomode *mode) +{ + struct fb_info *fbi; + struct mxcfb_info *mxcfbi; + int ret = 0; + + /* + * Initialize FB structures + */ + fbi = mxcfb_init_fbinfo(); + if (!fbi) { + ret = -ENOMEM; + goto err0; + } + mxcfbi = (struct mxcfb_info *)fbi->par; + + if (!g_dp_in_use) { + mxcfbi->ipu_ch = MEM_BG_SYNC; + mxcfbi->blank = FB_BLANK_UNBLANK; + } else { + mxcfbi->ipu_ch = MEM_DC_SYNC; + mxcfbi->blank = FB_BLANK_POWERDOWN; + } + + mxcfbi->ipu_di = 0; + + ipu_disp_set_global_alpha(mxcfbi->ipu_ch, 1, 0x80); + ipu_disp_set_color_key(mxcfbi->ipu_ch, 0, 0); + strcpy(fbi->fix.id, "DISP3 BG"); + + g_dp_in_use = 1; + + mxcfb_info[mxcfbi->ipu_di] = fbi; + + /* Need dummy values until real panel is configured */ + fbi->var.xres = 640; + fbi->var.yres = 480; + fbi->var.bits_per_pixel = 16; + + mxcfbi->ipu_di_pix_fmt = interface_pix_fmt; + fb_videomode_to_var(&fbi->var, mode); + + mxcfb_check_var(&fbi->var, fbi); + + /* Default Y virtual size is 2x panel size */ + fbi->var.yres_virtual = fbi->var.yres * 2; + + mxcfb_set_fix(fbi); + + /* alocate fb first */ + if (mxcfb_map_video_memory(fbi) < 0) + return -ENOMEM; + + mxcfb_set_par(fbi); + + /* Setting panel_info for lcd */ + panel_info.cmap = NULL; + panel_info.vl_col = fbi->var.xres; + panel_info.vl_row = fbi->var.yres; + panel_info.vl_bpix = LCD_BPP; + + lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; + + debug("MXC IPUV3 configured\n" + "XRES = %d YRES = %d BitsXpixel = %d\n", + panel_info.vl_col, + panel_info.vl_row, + panel_info.vl_bpix); + + ipu_dump_registers(); + + return 0; + +err0: + return ret; +} + +int overwrite_console(void) +{ + /* Keep stdout / stderr on serial, our LCD is for splashscreen only */ + return 1; +} + +void lcd_ctrl_init(void *lcdbase) +{ + u32 mem_len = panel_info.vl_col * + panel_info.vl_row * + NBITS(panel_info.vl_bpix) / 8; + + /* + * We rely on lcdbase being a physical address, i.e., either MMU off, + * or 1-to-1 mapping. Might want to add some virt2phys here. + */ + if (!lcdbase) + return; + + memset(lcdbase, 0, mem_len); +} + +int mx51_fb_init(struct fb_videomode *mode) +{ + int ret; + + ret = ipu_probe(); + if (ret) + puts("Error initializing IPU\n"); + + lcd_base += 56; + + debug("Framebuffer at 0x%x\n", (unsigned int)lcd_base); + ret = mxcfb_probe(IPU_PIX_FMT_RGB666, mode); + + return ret; +} diff --git a/drivers/video/mxcfb.h b/drivers/video/mxcfb.h new file mode 100644 index 00000000000..d508196603b --- /dev/null +++ b/drivers/video/mxcfb.h @@ -0,0 +1,68 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2010 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de + * + * Linux IPU driver for MX51: + * + * (C) Copyright 2004-2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MXCFB_H__ +#define __ASM_ARCH_MXCFB_H__ + +#define FB_SYNC_OE_LOW_ACT 0x80000000 +#define FB_SYNC_CLK_LAT_FALL 0x40000000 +#define FB_SYNC_DATA_INVERT 0x20000000 +#define FB_SYNC_CLK_IDLE_EN 0x10000000 +#define FB_SYNC_SHARP_MODE 0x08000000 +#define FB_SYNC_SWAP_RGB 0x04000000 + +struct mxcfb_gbl_alpha { + int enable; + int alpha; +}; + +struct mxcfb_loc_alpha { + int enable; + int alpha_in_pixel; + unsigned long alpha_phy_addr0; + unsigned long alpha_phy_addr1; +}; + +struct mxcfb_color_key { + int enable; + __u32 color_key; +}; + +struct mxcfb_pos { + __u16 x; + __u16 y; +}; + +struct mxcfb_gamma { + int enable; + int constk[16]; + int slopek[16]; +}; + +#endif From a0152c4ba1ea052df2c3303195d252b86cbfc121 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Thu, 21 Oct 2010 10:34:39 +0200 Subject: [PATCH 023/116] MX51: Add video support to vision2 board The patch adds support for LCD to the vision2 board. Signed-off-by: Stefano Babic --- board/ttcontrol/vision2/vision2.c | 68 +++++++++++++++++++++++++++++++ include/configs/vision2.h | 14 +++++++ 2 files changed, 82 insertions(+) diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index ce4cb78e981..071dad66c4e 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -37,14 +37,34 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; static u32 system_rev; +extern int mx51_fb_init(struct fb_videomode *mode); + #ifdef CONFIG_HW_WATCHDOG #include +static struct fb_videomode nec_nl6448bc26_09c = { + "NEC_NL6448BC26-09C", + 60, /* Refresh */ + 640, /* xres */ + 480, /* yres */ + 37650, /* pixclock = 26.56Mhz */ + 48, /* left margin */ + 16, /* right margin */ + 31, /* upper margin */ + 12, /* lower margin */ + 96, /* hsync-len */ + 2, /* vsync-len */ + 0, /* sync */ + FB_VMODE_NONINTERLACED, /* vmode */ + 0, /* flag */ +}; + void hw_watchdog_reset(void) { int val; @@ -423,6 +443,9 @@ static void setup_gpios(void) mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3); mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x82); + /* PWM Output GPIO1_2 */ + mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT1); + /* * Set GPIO1_4 to high and output; it is used to reset * the system on reboot @@ -630,6 +653,33 @@ int board_early_init_f(void) return 0; } +static void backlight(int on) +{ + if (on) { + mxc_gpio_set(65, 1); + udelay(10000); + mxc_gpio_set(68, 1); + } else { + mxc_gpio_set(65, 0); + mxc_gpio_set(68, 0); + } +} + +void lcd_enable(void) +{ + int ret; + + mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0); + mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0); + + mxc_gpio_set(2, 1); + mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0); + + ret = mx51_fb_init(&nec_nl6448bc26_09c); + if (ret) + puts("LCD cannot be configured\n"); +} + int board_init(void) { #ifdef CONFIG_SYS_ARM_WITHOUT_RELOC @@ -709,3 +759,21 @@ int checkboard(void) return 0; } +int do_vision_lcd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int on; + + if (argc < 2) + return cmd_usage(cmdtp); + + on = (strcmp(argv[1], "on") == 0); + backlight(on); + + return 0; +} + +U_BOOT_CMD( + lcdbl, CONFIG_SYS_MAXARGS, 1, do_vision_lcd, + "Vision2 Backlight", + "lcdbl [on|off]\n" +); diff --git a/include/configs/vision2.h b/include/configs/vision2.h index a2ecbe50d63..d2d95652476 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -211,4 +211,18 @@ #define CONFIG_SYS_NO_FLASH +/* + * Framebuffer and LCD + */ +#define CONFIG_PREBOOT +#define CONFIG_LCD +#define CONFIG_VIDEO_MX5 +#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP + #endif /* __CONFIG_H */ From 6e96cf9a812757d98dc9504648d3c39d5f2768f4 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 19:36:39 +0200 Subject: [PATCH 024/116] PXA: Implement ELF relocation Based on patch by: Albert Aribaud Signed-off-by: Marek Vasut --- arch/arm/cpu/pxa/start.S | 129 ++++++++++++++++++------------------ arch/arm/cpu/pxa/u-boot.lds | 19 +++--- 2 files changed, 72 insertions(+), 76 deletions(-) diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 684e44e8389..96bfb548419 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -8,6 +8,7 @@ * Copyright (C) 2002 Kyle Harris * Copyright (C) 2003 Robert Schwebel * Copyright (C) 2003 Kai-Uwe Bloem + * Copyright (c) 2010 Marek Vasut * * See file CREDITS for list of people who contributed to this * project. @@ -94,20 +95,16 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -.globl _armboot_start -_armboot_start: - .word _start - /* * These are defined in the board-specific linker script. */ -.globl _bss_start -_bss_start: - .word __bss_start +.globl _bss_start_ofs +_bss_start_ofs: + .word __bss_start - _start -.globl _bss_end -_bss_end: - .word _end +.globl _bss_end_ofs +_bss_end_ofs: + .word _end - _start #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ @@ -127,30 +124,6 @@ FIQ_STACK_START: IRQ_STACK_START_IN: .word 0x0badc0de -.globl _datarel_start -_datarel_start: - .word __datarel_start - -.globl _datarelrolocal_start -_datarelrolocal_start: - .word __datarelrolocal_start - -.globl _datarellocal_start -_datarellocal_start: - .word __datarellocal_start - -.globl _datarelro_start -_datarelro_start: - .word __datarelro_start - -.globl _got_start -_got_start: - .word __got_start - -.globl _got_end -_got_end: - .word __got_end - /* * the actual reset code */ @@ -272,9 +245,8 @@ stack_setup: adr r0, _start ldr r2, _TEXT_BASE - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ + ldr r3, _bss_start_ofs + add r2, r0, r3 /* r2 <- source end address */ cmp r0, r6 beq clear_bss @@ -288,36 +260,54 @@ copy_loop: ldmfd sp!, {r0-r12} #ifndef CONFIG_PRELOADER - /* fix got entries */ - ldr r1, _TEXT_BASE /* Text base */ - mov r0, r7 /* reloc addr */ - ldr r2, _got_start /* addr in Flash */ - ldr r3, _got_end /* addr in Flash */ - sub r3, r3, r1 - add r3, r3, r0 - sub r2, r2, r1 - add r2, r2, r0 - + /* + * fix .rel.dyn relocations + */ + ldr r0, _TEXT_BASE /* r0 <- Text base */ + sub r9, r7, r0 /* r9 <- relocation offset */ + ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ + add r10, r10, r0 /* r10 <- sym table in FLASH */ + ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ + add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ + ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ + add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r4, [r2] - sub r4, r4, r1 - add r4, r4, r0 - str r4, [r2] - add r2, r2, #4 + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r9 /* r0 <- location to fix up in RAM */ + ldr r1, [r2, #4] + and r8, r1, #0xff + cmp r8, #23 /* relative fixup? */ + beq fixrel + cmp r8, #2 /* absolute fixup? */ + beq fixabs + /* ignore unknown type of fixup */ + b fixnext +fixabs: + /* absolute fix: set location to (offset) symbol value */ + mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ + add r1, r10, r1 /* r1 <- address of symbol in table */ + ldr r1, [r1, #4] /* r1 <- symbol value */ + add r1, r9 /* r1 <- relocated sym addr */ + b fixnext +fixrel: + /* relative fix: increase location by offset */ + ldr r1, [r0] + add r1, r1, r9 +fixnext: + str r1, [r0] + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER - ldr r0, _bss_start - ldr r1, _bss_end + ldr r0, _bss_start_ofs + ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ mov r4, r7 /* reloc addr */ - sub r0, r0, r3 add r0, r0, r4 - sub r1, r1, r3 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -332,24 +322,33 @@ clbss_l:str r2, [r0] /* clear loop... */ * initialization, now running from RAM. */ #ifdef CONFIG_ONENAND_IPL - ldr pc, _start_oneboot + ldr r0, _start_oneboot_ofs + mov pc, r0 -_start_oneboot: .word start_oneboot +_start_oneboot_ofs + : .word start_oneboot #else - ldr r0, _TEXT_BASE - ldr r2, _board_init_r - sub r2, r2, r0 - add r2, r2, r7 /* position from board_init_r in RAM */ + ldr r0, _board_init_r_ofs + adr r1, _start + add r0, r0, r1 + add lr, r0, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ /* jump to it ... */ - mov lr, r2 mov pc, lr -_board_init_r: .word board_init_r +_board_init_r_ofs: + .word board_init_r - _start #endif +_rel_dyn_start_ofs: + .word __rel_dyn_start - _start +_rel_dyn_end_ofs: + .word __rel_dyn_end - _start +_dynsym_start_ofs: + .word __dynsym_start - _start + #else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ /****************************************************************************/ diff --git a/arch/arm/cpu/pxa/u-boot.lds b/arch/arm/cpu/pxa/u-boot.lds index 74a4c6e90c9..d6643f9529b 100644 --- a/arch/arm/cpu/pxa/u-boot.lds +++ b/arch/arm/cpu/pxa/u-boot.lds @@ -41,21 +41,18 @@ SECTIONS . = ALIGN(4); .data : { *(.data) - __datarel_start = .; - *(.data.rel) - __datarelrolocal_start = .; - *(.data.rel.ro.local) - __datarellocal_start = .; - *(.data.rel.local) - __datarelro_start = .; - *(.data.rel.ro) } - __got_start = .; . = ALIGN(4); - .got : { *(.got) } + __rel_dyn_start = .; + .rel.dyn : { *(.rel.dyn) } + __rel_dyn_end = .; + + __dynsym_start = .; + .dynsym : { *(.dynsym) } + + . = ALIGN(4); - __got_end = .; . = .; __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } From 4abf2f7a23204dc4e10f0926609b89dfa7ab4394 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 20:09:09 +0200 Subject: [PATCH 025/116] PXA: Use pxa-regs.h register definitions in start.S Signed-off-by: Marek Vasut --- arch/arm/cpu/pxa/start.S | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 96bfb548419..3c5bd84e360 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -566,13 +566,7 @@ fiq: /* */ /****************************************************************************/ /* Operating System Timer */ -OSTIMER_BASE: .word 0x40a00000 -#define OSMR3 0x0C -#define OSCR 0x10 -#define OWER 0x18 -#define OIER 0x1C - - .align 5 +.align 5 .globl reset_cpu /* FIXME: this code is PXA250 specific. How is this handled on */ @@ -582,18 +576,20 @@ reset_cpu: /* We set OWE:WME (watchdog enable) and wait until timeout happens */ - ldr r0, OSTIMER_BASE - ldr r1, [r0, #OWER] + ldr r0, =OWER + ldr r1, [r0] orr r1, r1, #0x0001 /* bit0: WME */ - str r1, [r0, #OWER] + str r1, [r0] /* OS timer does only wrap every 1165 seconds, so we have to set */ /* the match register as well. */ - ldr r1, [r0, #OSCR] /* read OS timer */ + ldr r0, =OSCR + ldr r1, [r0] /* read OS timer */ add r1, r1, #0x800 /* let OSMR3 match after */ add r1, r1, #0x800 /* 4096*(1/3.6864MHz)=1ms */ - str r1, [r0, #OSMR3] + ldr r0, =OSMR3 + str r1, [r0] reset_endless: From caeb8c0ac2741a57d50de8654b9dc1bdb5001c8e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 18:56:41 +0200 Subject: [PATCH 026/116] PXA: cerf250: Fix for reloc Signed-off-by: Marek Vasut --- board/cerf250/Makefile | 10 +- board/cerf250/cerf250.c | 22 +- board/cerf250/config.mk | 5 - board/cerf250/lowlevel_init.S | 411 ---------------------------------- include/configs/cerf250.h | 14 +- 5 files changed, 22 insertions(+), 440 deletions(-) delete mode 100644 board/cerf250/config.mk delete mode 100644 board/cerf250/lowlevel_init.S diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile index a806b184920..b111b519f08 100644 --- a/board/cerf250/Makefile +++ b/board/cerf250/Makefile @@ -26,17 +26,15 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := cerf250.o flash.o -SOBJS := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c index 59346bc6d45..043afea265f 100644 --- a/board/cerf250/cerf250.c +++ b/board/cerf250/cerf250.c @@ -39,8 +39,9 @@ DECLARE_GLOBAL_DATA_PTR; int board_init (void) { - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); /* arch number of cerf PXA Board */ gd->bd->bi_arch_number = MACH_TYPE_PXA_CERF; @@ -58,19 +59,18 @@ int board_late_init(void) return 0; } +extern void pxa_dram_init(void); +int dram_init(void) +{ + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} -int dram_init (void) +void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; - gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; - - return 0; } #ifdef CONFIG_CMD_NET diff --git a/board/cerf250/config.mk b/board/cerf250/config.mk deleted file mode 100644 index c2d46b2be05..00000000000 --- a/board/cerf250/config.mk +++ /dev/null @@ -1,5 +0,0 @@ -# -# Cerf board with PXA250 cpu -# -# -CONFIG_SYS_TEXT_BASE = 0xa3080000 diff --git a/board/cerf250/lowlevel_init.S b/board/cerf250/lowlevel_init.S deleted file mode 100644 index 5bfe53c728e..00000000000 --- a/board/cerf250/lowlevel_init.S +++ /dev/null @@ -1,411 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/lowlevel_init.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - - -/* - * Memory setup - */ - -.globl lowlevel_init -lowlevel_init: - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0, =GPSR0 - ldr r1, =CONFIG_SYS_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CONFIG_SYS_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CONFIG_SYS_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CONFIG_SYS_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CONFIG_SYS_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CONFIG_SYS_GPCR2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CONFIG_SYS_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CONFIG_SYS_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CONFIG_SYS_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CONFIG_SYS_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CONFIG_SYS_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CONFIG_SYS_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CONFIG_SYS_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CONFIG_SYS_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CONFIG_SYS_GAFR2_U_VAL - str r1, [r0] - - ldr r0, =PSSR /* enable GPIO pins */ - ldr r1, =CONFIG_SYS_PSSR_VAL - str r1, [r0] - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1, =MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2, =CONFIG_SYS_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ - /* that data latches */ - /* MSC1: nCS(2,3) */ - ldr r2, =CONFIG_SYS_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2, =CONFIG_SYS_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2, =CONFIG_SYS_MECR_VAL - str r2, [r1, #MECR_OFFSET] - ldr r2, [r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CONFIG_SYS_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - ldr r2, [r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CONFIG_SYS_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - ldr r2, [r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CONFIG_SYS_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - ldr r2, [r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CONFIG_SYS_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - ldr r2, [r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CONFIG_SYS_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - ldr r2, [r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CONFIG_SYS_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - ldr r2, [r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - /* Before accessing MDREFR we need a valid DRI field, so we set */ - /* this to power on defaults + DRI field, set SDRAM clocks free running */ - - ldr r3, =CONFIG_SYS_MDREFR_VAL - ldr r2, =0xFFF - and r3, r3, r2 - - ldr r0, [r1, #MDREFR_OFFSET] - bic r0, r0, r2 - bic r0, r0, #(MDREFR_K0FREE|MDREFR_K1FREE|MDREFR_K2FREE) - orr r0, r0, r3 - - str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - /* FIXME: we use async mode for now */ - - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - /* set MDREFR according to user define with exception of a few bits */ - - ldr r4, =CONFIG_SYS_MDREFR_VAL - ldr r2, =(MDREFR_K0RUN|MDREFR_K0DB2|MDREFR_K1RUN|MDREFR_K1DB2|\ - MDREFR_K2RUN |MDREFR_K2DB2) - and r4, r4, r2 - bic r0, r0, r2 - orr r0, r0, r4 - - str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r0, [r1, #MDREFR_OFFSET] - - /* Step 4b: de-assert MDREFR:SLFRSH. */ - - bic r0, r0, #(MDREFR_SLFRSH) - str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r0, [r1, #MDREFR_OFFSET] - - - /* Step 4c: assert MDREFR:E1PIN and E0PIO as desired, set KXFREE */ - - ldr r4, =CONFIG_SYS_MDREFR_VAL - ldr r2, =(MDREFR_E0PIN|MDREFR_E1PIN|MDREFR_K0FREE| \ - MDREFR_K1FREE | MDREFR_K2FREE) - and r4, r4, r2 - orr r0, r0, r4 - str r0, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r0, [r1, #MDREFR_OFFSET] - - - /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ - /* configure but not enable each SDRAM partition pair. */ - - ldr r4, =CONFIG_SYS_MDCNFG_VAL - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) - str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ - ldr r4, [r1, #MDCNFG_OFFSET] - - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - ldr r3, =CONFIG_SYS_DRAM_BASE -.rept 8 - str r2, [r3] -.endr - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* (MDCNFG:DEx set to 1). */ - - ldr r3, [r1, #MDCNFG_OFFSET] - orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) - str r3, [r1, #MDCNFG_OFFSET] - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CONFIG_SYS_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - - /* We are finished with Intel's memory controller initialisation */ - - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r2, =ICMR /* mask all interrupts at the controller */ - str r1, [r2] - - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - /* Note: See label 'ENABLECLKS' for the re-enabling */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - - /* default value in case no valid rotary switch setting is found */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] - -#ifdef RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - /* ---------------------------------------------------------------- */ - /* */ - /* ---------------------------------------------------------------- */ - - /* Save SDRAM size */ - ldr r1, =DRAM_SIZE - str r8, [r1] - - /* Interrupt init: Mask all interrupts */ - ldr r0, =ICMR /* enable no sources */ - mov r1, #0 - str r1, [r0] - - /* FIXME */ - -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -#endif - - /* ---------------------------------------------------------------- */ - /* End lowlevel_init */ - /* ---------------------------------------------------------------- */ - -endlowlevel_init: - - mov pc, lr diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h index 98b69e37127..a0726a9efe8 100644 --- a/include/configs/cerf250.h +++ b/include/configs/cerf250.h @@ -38,6 +38,7 @@ #define CONFIG_CERF250 1 /* on Cerf PXA Board */ #define BOARD_LATE_INIT 1 #define CONFIG_BAUDRATE 38400 +#define CONFIG_SYS_TEXT_BASE 0x0 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ @@ -140,15 +141,9 @@ /* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ @@ -187,6 +182,9 @@ #define CONFIG_SYS_PSSR_VAL 0x20 +#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 +#define CONFIG_SYS_CKEN 0x0 + /* * Memory settings */ @@ -196,6 +194,8 @@ #define CONFIG_SYS_MDCNFG_VAL 0x00001AC9 #define CONFIG_SYS_MDREFR_VAL 0x03CDC017 #define CONFIG_SYS_MDMRS_VAL 0x00000000 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 /* * PCMCIA and CF Interfaces From d94bbbeb16d80abfff4bb333efb1251b92bc5c6f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 20:15:11 +0200 Subject: [PATCH 027/116] PXA: colibri_pxa270: Fix for reloc Signed-off-by: Marek Vasut --- board/colibri_pxa270/Makefile | 10 +++----- board/colibri_pxa270/colibri_pxa270.c | 18 +++++++++----- board/colibri_pxa270/config.mk | 1 - board/colibri_pxa270/lowlevel_init.S | 36 --------------------------- include/configs/colibri_pxa270.h | 2 +- 5 files changed, 17 insertions(+), 50 deletions(-) delete mode 100644 board/colibri_pxa270/config.mk delete mode 100644 board/colibri_pxa270/lowlevel_init.S diff --git a/board/colibri_pxa270/Makefile b/board/colibri_pxa270/Makefile index ae570e153c4..f8b44abee00 100644 --- a/board/colibri_pxa270/Makefile +++ b/board/colibri_pxa270/Makefile @@ -24,17 +24,15 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := colibri_pxa270.o -SOBJS := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/colibri_pxa270/colibri_pxa270.c b/board/colibri_pxa270/colibri_pxa270.c index 8aa7067c732..191fb333e40 100644 --- a/board/colibri_pxa270/colibri_pxa270.c +++ b/board/colibri_pxa270/colibri_pxa270.c @@ -42,8 +42,9 @@ struct serial_device *default_serial_console (void) int board_init (void) { - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); /* arch number of vpac270 */ gd->bd->bi_arch_number = MACH_TYPE_COLIBRI; @@ -54,13 +55,18 @@ int board_init (void) return 0; } -int dram_init (void) +extern void pxa_dram_init(void); +int dram_init(void) +{ + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} + +void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; } #ifdef CONFIG_CMD_USB diff --git a/board/colibri_pxa270/config.mk b/board/colibri_pxa270/config.mk deleted file mode 100644 index 0f10662ce38..00000000000 --- a/board/colibri_pxa270/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0xa1000000 diff --git a/board/colibri_pxa270/lowlevel_init.S b/board/colibri_pxa270/lowlevel_init.S deleted file mode 100644 index a43dac2baee..00000000000 --- a/board/colibri_pxa270/lowlevel_init.S +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Toradex Colibri PXA270 Lowlevel Hardware Initialization - * - * Copyright (C) 2010 Marek Vasut - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -.globl lowlevel_init -lowlevel_init: - pxa_gpio_setup - pxa_wait_ticks 0x8000 - pxa_mem_setup - pxa_wakeup - pxa_intr_setup - pxa_clock_setup - - mov pc, lr diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 5f457f80deb..afc15378bfd 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -39,7 +39,7 @@ #define CONFIG_ENV_SIZE 0x4000 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) #define CONFIG_SYS_GBL_DATA_SIZE 128 - +#define CONFIG_SYS_TEXT_BASE 0x0 #define CONFIG_ENV_OVERWRITE /* override default environment */ #define CONFIG_BOOTCOMMAND \ From eb0e11bd2adddb486d66a7bac0729a99c6f00953 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 20:17:51 +0200 Subject: [PATCH 028/116] PXA: cradle: Fix for reloc Signed-off-by: Marek Vasut --- board/cradle/Makefile | 10 +- board/cradle/config.mk | 2 - board/cradle/cradle.c | 30 +- board/cradle/lowlevel_init.S | 515 ----------------------------------- include/configs/cradle.h | 18 +- include/configs/csb226.h | 3 + 6 files changed, 28 insertions(+), 550 deletions(-) delete mode 100644 board/cradle/config.mk delete mode 100644 board/cradle/lowlevel_init.S diff --git a/board/cradle/Makefile b/board/cradle/Makefile index 1ae785db5fc..720593c4825 100644 --- a/board/cradle/Makefile +++ b/board/cradle/Makefile @@ -26,17 +26,15 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := cradle.o flash.o -SOBJS := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/cradle/config.mk b/board/cradle/config.mk deleted file mode 100644 index 6656bddee12..00000000000 --- a/board/cradle/config.mk +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0xa0f80000 -#CONFIG_SYS_TEXT_BASE = 0 diff --git a/board/cradle/cradle.c b/board/cradle/cradle.c index c4a93f91b76..2bbf2d532d4 100644 --- a/board/cradle/cradle.c +++ b/board/cradle/cradle.c @@ -185,6 +185,10 @@ int board_init (void) /**********************************************************/ { + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); + led_code (0xf, YELLOW); /* arch number of HHP Cradle */ @@ -206,24 +210,18 @@ board_init (void) return 1; } -int -/**********************************************************/ -dram_init (void) -/**********************************************************/ +extern void pxa_dram_init(void); +int dram_init(void) +{ + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} + +void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; - gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; - - return (PHYS_SDRAM_1_SIZE + - PHYS_SDRAM_2_SIZE + - PHYS_SDRAM_3_SIZE + - PHYS_SDRAM_4_SIZE ); + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; } #ifdef CONFIG_CMD_NET diff --git a/board/cradle/lowlevel_init.S b/board/cradle/lowlevel_init.S deleted file mode 100644 index 39964b64757..00000000000 --- a/board/cradle/lowlevel_init.S +++ /dev/null @@ -1,515 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - - .macro SET_LED val - ldr r6, =GPCR2 - ldr r7, =0 - str r7, [r6] - ldr r6, =GPSR2 - ldr r7, =\val - str r7, [r6] - .endm - - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - - /* Set up GPIO pins first */ - - ldr r0, =GPSR0 - ldr r1, =CONFIG_SYS_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CONFIG_SYS_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CONFIG_SYS_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CONFIG_SYS_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CONFIG_SYS_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CONFIG_SYS_GPCR2_VAL - str r1, [r0] - - ldr r0, =GRER0 - ldr r1, =CONFIG_SYS_GRER0_VAL - str r1, [r0] - - ldr r0, =GRER1 - ldr r1, =CONFIG_SYS_GRER1_VAL - str r1, [r0] - - ldr r0, =GRER2 - ldr r1, =CONFIG_SYS_GRER2_VAL - str r1, [r0] - - ldr r0, =GFER0 - ldr r1, =CONFIG_SYS_GFER0_VAL - str r1, [r0] - - ldr r0, =GFER1 - ldr r1, =CONFIG_SYS_GFER1_VAL - str r1, [r0] - - ldr r0, =GFER2 - ldr r1, =CONFIG_SYS_GFER2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CONFIG_SYS_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CONFIG_SYS_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CONFIG_SYS_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CONFIG_SYS_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CONFIG_SYS_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CONFIG_SYS_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CONFIG_SYS_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CONFIG_SYS_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CONFIG_SYS_GAFR2_U_VAL - str r1, [r0] - - /* enable GPIO pins */ - ldr r0, =PSSR - ldr r1, =CONFIG_SYS_PSSR_VAL - str r1, [r0] - - SET_LED 1 - - ldr r3, =MSC1 /* low - bank 2 Lubbock Registers / SRAM */ - ldr r2, =CONFIG_SYS_MSC1_VAL /* high - bank 3 Ethernet Controller */ - str r2, [r3] /* need to set MSC1 before trying to write to the HEX LEDs */ - ldr r2, [r3] /* need to read it back to make sure the value latches (see MSC section of manual) */ - - -/********************************************************************* - Initlialize Memory Controller - - See PXA250 Operating System Developer's Guide - - pause for 200 uSecs- allow internal clocks to settle - *Note: only need this if hard reset... doing it anyway for now -*/ - - @ Step 1 - @ ---- Wait 200 usec - ldr r3, =OSCR @ reset the OS Timer Count to zero - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - SET_LED 2 - -mem_init: - @ get memory controller base address - ldr r1, =MEMC_BASE - - -@**************************************************************************** -@ Step 2 -@ - - @ Step 2a - @ write msc0, read back to ensure data latches - @ - ldr r2, =CONFIG_SYS_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] - - @ write msc1 - ldr r2, =CONFIG_SYS_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - @ write msc2 - ldr r2, =CONFIG_SYS_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - @ Step 2b - @ write mecr - ldr r2, =CONFIG_SYS_MECR_VAL - str r2, [r1, #MECR_OFFSET] - - @ write mcmem0 - ldr r2, =CONFIG_SYS_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - - @ write mcmem1 - ldr r2, =CONFIG_SYS_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - - @ write mcatt0 - ldr r2, =CONFIG_SYS_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - - @ write mcatt1 - ldr r2, =CONFIG_SYS_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - - @ write mcio0 - ldr r2, =CONFIG_SYS_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - - @ write mcio1 - ldr r2, =CONFIG_SYS_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - - /*SET_LED 3 */ - - @ Step 2c - @ fly-by-dma is defeatured on this part - @ write flycnfg - @ldr r2, =CONFIG_SYS_FLYCNFG_VAL - @str r2, [r1, #FLYCNFG_OFFSET] - -/* FIXME Does this sequence really make sense */ -#ifdef REDBOOT_WAY - @ Step 2d - @ get the mdrefr settings - ldr r3, =CONFIG_SYS_MDREFR_VAL - - @ extract DRI field (we need a valid DRI field) - @ - ldr r2, =0xFFF - - @ valid DRI field in r3 - @ - and r3, r3, r2 - - @ get the reset state of MDREFR - @ - ldr r4, [r1, #MDREFR_OFFSET] - - @ clear the DRI field - @ - bic r4, r4, r2 - - @ insert the valid DRI field loaded above - @ - orr r4, r4, r3 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ *Note: preserve the mdrefr value in r4 * - - /*SET_LED 4 */ - -@**************************************************************************** -@ Step 3 -@ -@ NO SRAM - - mov pc, r10 - - -@**************************************************************************** -@ Step 4 -@ - - @ Assumes previous mdrefr value in r4, if not then read current mdrefr - - @ clear the free-running clock bits - @ (clear K0Free, K1Free, K2Free - @ - bic r4, r4, #(0x00800000 | 0x01000000 | 0x02000000) - - @ set K0RUN for CPLD clock - @ - orr r4, r4, #0x00002000 - - @ set K1RUN if bank 0 installed - @ - orr r4, r4, #0x00010000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #0x00400000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ - orr r4, r4, #0x00008000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop -#else - @ Step 2d - @ get the mdrefr settings - ldr r3, =CONFIG_SYS_MDREFR_VAL - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ Step 4 - - @ set K0RUN for CPLD clock - @ - orr r4, r4, #0x00002000 - - @ set K1RUN for bank 0 - @ - orr r4, r4, #0x00010000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #0x00400000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ - orr r4, r4, #0x00008000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop -#endif - - @ Step 4d - @ fetch platform value of mdcnfg - @ - ldr r2, =CONFIG_SYS_MDCNFG_VAL - - @ disable all sdram banks - @ - bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) - bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) - - @ program banks 0/1 for bus width - @ - bic r2, r2, #MDCNFG_DWID0 @0=32-bit - - @ write initial value of mdcnfg, w/o enabling sdram banks - @ - str r2, [r1, #MDCNFG_OFFSET] - - @ Step 4e - @ pause for 200 uSecs - @ - ldr r3, =OSCR @ reset the OS Timer Count to zero - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - /*SET_LED 5 */ - - /* Why is this here??? */ - mov r0, #0x78 @turn everything off - mcr p15, 0, r0, c1, c0, 0 @(caches off, MMU off, etc.) - - @ Step 4f - @ Access memory *not yet enabled* for CBR refresh cycles (8) - @ - CBR is generated for all banks - - ldr r2, =CONFIG_SYS_DRAM_BASE - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - - @ Step 4g - @get memory controller base address - @ - ldr r1, =MEMC_BASE - - @fetch current mdcnfg value - @ - ldr r3, [r1, #MDCNFG_OFFSET] - - @enable sdram bank 0 if installed (must do for any populated bank) - @ - orr r3, r3, #MDCNFG_DE0 - - @write back mdcnfg, enabling the sdram bank(s) - @ - str r3, [r1, #MDCNFG_OFFSET] - - @ Step 4h - @ write mdmrs - @ - ldr r2, =CONFIG_SYS_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - @ Done Memory Init - - /*SET_LED 6 */ - - @******************************************************************** - @ Disable (mask) all interrupts at the interrupt controller - @ - - @ clear the interrupt level register (use IRQ, not FIQ) - @ - mov r1, #0 - ldr r2, =ICLR - str r1, [r2] - - @ Set interrupt mask register - @ - ldr r1, =CONFIG_SYS_ICMR_VAL - ldr r2, =ICMR - str r1, [r2] - - @ ******************************************************************** - @ Disable the peripheral clocks, and set the core clock - @ - - @ Turn Off ALL on-chip peripheral clocks for re-configuration - @ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - @ set core clocks - @ - ldr r2, =CONFIG_SYS_CCCR_VAL - ldr r1, =CCCR - str r2, [r1] - -#ifdef ENABLE32KHZ - @ enable the 32Khz oscillator for RTC and PowerManager - @ - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - @ NOTE: spin here until OSCC.OOK get set, - @ meaning the PLL has settled. - @ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - @ Turn on needed clocks - @ - ldr r1, =CKEN - ldr r2, =CONFIG_SYS_CKEN_VAL - str r2, [r1] - - /*SET_LED 7 */ - -/* Is this needed???? */ -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -#endif - - /*SET_LED 8 */ - - mov pc, r10 - -@ End lowlevel_init diff --git a/include/configs/cradle.h b/include/configs/cradle.h index d1c1a48e0c9..3da35623c08 100644 --- a/include/configs/cradle.h +++ b/include/configs/cradle.h @@ -39,7 +39,7 @@ /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_NO_DCACHE - +#define CONFIG_SYS_TEXT_BASE 0x0 /* * Size of malloc() pool */ @@ -126,15 +126,9 @@ /* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x01000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0x04000000 /* Flash Bank #1 */ @@ -289,9 +283,9 @@ * Clocks, power control and interrupts */ #define CONFIG_SYS_PSSR_VAL 0x00000020 -#define CONFIG_SYS_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */ -#define CONFIG_SYS_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */ -#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_CCCR 0x00000141 /* 100 MHz memory, 200 MHz CPU */ +#define CONFIG_SYS_CKEN 0x00000060 /* FFUART and STUART enabled */ +#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ /* FIXME * @@ -319,6 +313,8 @@ #define CONFIG_SYS_MDMRS_VAL 0x00000000 #define CONFIG_SYS_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in lowlevel_init.S */ #endif +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 /* * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init) diff --git a/include/configs/csb226.h b/include/configs/csb226.h index ae05734a09e..169ec347712 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -458,6 +458,9 @@ #define CONFIG_SYS_PSSR_VAL 0x20 +#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 +#define CONFIG_SYS_CKEN 0x0 + /* * Memory settings */ From 38f8eb33a0ca2b75126168339e0846ef4edf3050 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 20:43:41 +0200 Subject: [PATCH 029/116] PXA: csb226: Fix for reloc Signed-off-by: Marek Vasut --- board/csb226/Makefile | 10 +- board/csb226/config.mk | 15 -- board/csb226/csb226.c | 24 +- board/csb226/lowlevel_init.S | 437 ----------------------------------- include/configs/csb226.h | 4 +- 5 files changed, 19 insertions(+), 471 deletions(-) delete mode 100644 board/csb226/config.mk delete mode 100644 board/csb226/lowlevel_init.S diff --git a/board/csb226/Makefile b/board/csb226/Makefile index c12dbea9cdd..5e1332bae41 100644 --- a/board/csb226/Makefile +++ b/board/csb226/Makefile @@ -26,17 +26,15 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := csb226.o flash.o -SOBJS := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/csb226/config.mk b/board/csb226/config.mk deleted file mode 100644 index 9e4655585d7..00000000000 --- a/board/csb226/config.mk +++ /dev/null @@ -1,15 +0,0 @@ -# -# Linux-Kernel is expected to be at c000'8000, entry c000'8000 -# -# we load ourself to c170'0000, the upper 1 MB of second bank -# -# download areas is c800'0000 -# - -# This is the address where U-Boot lives in flash: -#CONFIG_SYS_TEXT_BASE = 0 - -# FIXME: armboot does only work correctly when being compiled -# for the addresses _after_ relocation to RAM!! Otherwhise the -# .bss segment is assumed in flash... -CONFIG_SYS_TEXT_BASE = 0xa1fe0000 diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c index 6eed9ad676f..dd29e626591 100644 --- a/board/csb226/csb226.c +++ b/board/csb226/csb226.c @@ -69,8 +69,9 @@ int misc_init_r(void) int board_init (void) { - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); /* arch number of CSB226 board */ gd->bd->bi_arch_number = MACH_TYPE_CSB226; @@ -82,20 +83,19 @@ int board_init (void) } -/** - * dram_init: - setup dynamic RAM - * - * @return: 0 in case of success - */ - -int dram_init (void) +extern void pxa_dram_init(void); +int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; return 0; } +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; +} /** * csb226_set_led: - switch LEDs on or off diff --git a/board/csb226/lowlevel_init.S b/board/csb226/lowlevel_init.S deleted file mode 100644 index 55169be45ea..00000000000 --- a/board/csb226/lowlevel_init.S +++ /dev/null @@ -1,437 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/lowlevel_init.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - - -/* - * Memory setup - */ - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0, =GPSR0 - ldr r1, =CONFIG_SYS_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CONFIG_SYS_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CONFIG_SYS_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CONFIG_SYS_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CONFIG_SYS_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CONFIG_SYS_GPCR2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CONFIG_SYS_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CONFIG_SYS_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CONFIG_SYS_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CONFIG_SYS_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CONFIG_SYS_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CONFIG_SYS_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CONFIG_SYS_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CONFIG_SYS_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CONFIG_SYS_GAFR2_U_VAL - str r1, [r0] - - ldr r0, =PSSR /* enable GPIO pins */ - ldr r1, =CONFIG_SYS_PSSR_VAL - str r1, [r0] - -/* ldr r3, =MSC1 / low - bank 2 Lubbock Registers / SRAM */ -/* ldr r2, =CONFIG_SYS_MSC1_VAL / high - bank 3 Ethernet Controller */ -/* str r2, [r3] / need to set MSC1 before trying to write to the HEX LEDs */ -/* ldr r2, [r3] / need to read it back to make sure the value latches (see MSC section of manual) */ -/* */ -/* ldr r1, =LED_BLANK */ -/* mov r0, #0xFF */ -/* str r0, [r1] / turn on hex leds */ -/* */ -/*loop: */ -/* */ -/* ldr r0, =0xB0070001 */ -/* ldr r1, =_LED */ -/* str r0, [r1] / hex display */ - - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1, =MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2, =CONFIG_SYS_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ - /* that data latches */ - /* MSC1: nCS(2,3) */ - ldr r2, =CONFIG_SYS_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2, =CONFIG_SYS_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2, =CONFIG_SYS_MECR_VAL - str r2, [r1, #MECR_OFFSET] - ldr r2, [r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CONFIG_SYS_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - ldr r2, [r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CONFIG_SYS_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - ldr r2, [r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CONFIG_SYS_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - ldr r2, [r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CONFIG_SYS_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - ldr r2, [r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CONFIG_SYS_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - ldr r2, [r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CONFIG_SYS_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - ldr r2, [r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - - /* test if we run from flash or RAM - RAM/BDI: don't setup RAM */ - adr r3, mem_init /* r0 <- current position of code */ - ldr r2, =mem_init - cmp r3, r2 /* skip init if in place */ - beq initirqs - - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - /* Before accessing MDREFR we need a valid DRI field, so we set */ - /* this to power on defaults + DRI field. */ - - ldr r3, =CONFIG_SYS_MDREFR_VAL - ldr r2, =0xFFF - and r3, r3, r2 - ldr r4, =0x03ca4000 - orr r4, r4, r3 - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - /* FIXME: we use async mode for now */ - - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - /* Step 4a: assert MDREFR:K?RUN and configure */ - /* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */ - - ldr r4, =CONFIG_SYS_MDREFR_VAL - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Step 4b: de-assert MDREFR:SLFRSH. */ - - bic r4, r4, #(MDREFR_SLFRSH) - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4c: assert MDREFR:E1PIN and E0PIO */ - - orr r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ - /* configure but not enable each SDRAM partition pair. */ - - ldr r4, =CONFIG_SYS_MDCNFG_VAL - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - - str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ - ldr r4, [r1, #MDCNFG_OFFSET] - - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - /* There should 9 writes, since the first write doesn't */ - /* trigger a refresh cycle on PXA250. See Intel PXA250 and */ - /* PXA210 Processors Specification Update, */ - /* Jan 2003, Errata #116, page 30. */ - - - ldr r3, =CONFIG_SYS_DRAM_BASE - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* (MDCNFG:DEx set to 1). */ - - ldr r3, [r1, #MDCNFG_OFFSET] - orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) - str r3, [r1, #MDCNFG_OFFSET] - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CONFIG_SYS_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - - /* We are finished with Intel's memory controller initialisation */ - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r2, =ICMR /* mask all interrupts at the controller */ - str r1, [r2] - - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - /* (hard-coding at 398.12MHz for now). */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - /* Note: See label 'ENABLECLKS' for the re-enabling */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - - /* default value in case no valid rotary switch setting is found */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] - - /* enable the 32Khz oscillator for RTC and PowerManager */ -/* - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] -*/ - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b - - /* ---------------------------------------------------------------- */ - /* */ - /* ---------------------------------------------------------------- */ - - /* Save SDRAM size */ - ldr r1, =DRAM_SIZE - str r8, [r1] - - /* Interrupt init: Mask all interrupts */ - ldr r0, =ICMR /* enable no sources */ - mov r1, #0 - str r1, [r0] - - /* FIXME */ - -#ifndef DEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ -#endif - - /* ---------------------------------------------------------------- */ - /* End lowlevel_init */ - /* ---------------------------------------------------------------- */ - -endlowlevel_init: - - mov pc, lr diff --git a/include/configs/csb226.h b/include/configs/csb226.h index 169ec347712..72e47ce7a84 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -45,7 +45,7 @@ /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_NO_DCACHE - +#define CONFIG_SYS_TEXT_BASE 0x0 /* * Hardware drivers */ @@ -471,6 +471,8 @@ #define CONFIG_SYS_MDCNFG_VAL 0x09a909a9 #define CONFIG_SYS_MDREFR_VAL 0x038ff030 #define CONFIG_SYS_MDMRS_VAL 0x00220022 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 /* * PCMCIA and CF Interfaces From df1ac0ec54afc16933e81d17f27d0f1901f40ba5 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 20:52:21 +0200 Subject: [PATCH 030/116] PXA: innokom: Fix for reloc Signed-off-by: Marek Vasut --- board/innokom/Makefile | 10 +- board/innokom/config.mk | 15 -- board/innokom/innokom.c | 25 +- board/innokom/lowlevel_init.S | 437 ---------------------------------- include/configs/innokom.h | 8 + 5 files changed, 24 insertions(+), 471 deletions(-) delete mode 100644 board/innokom/config.mk delete mode 100644 board/innokom/lowlevel_init.S diff --git a/board/innokom/Makefile b/board/innokom/Makefile index afae217242c..ba248c03e73 100644 --- a/board/innokom/Makefile +++ b/board/innokom/Makefile @@ -26,17 +26,15 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := innokom.o flash.o -SOBJS := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/innokom/config.mk b/board/innokom/config.mk deleted file mode 100644 index 9e4655585d7..00000000000 --- a/board/innokom/config.mk +++ /dev/null @@ -1,15 +0,0 @@ -# -# Linux-Kernel is expected to be at c000'8000, entry c000'8000 -# -# we load ourself to c170'0000, the upper 1 MB of second bank -# -# download areas is c800'0000 -# - -# This is the address where U-Boot lives in flash: -#CONFIG_SYS_TEXT_BASE = 0 - -# FIXME: armboot does only work correctly when being compiled -# for the addresses _after_ relocation to RAM!! Otherwhise the -# .bss segment is assumed in flash... -CONFIG_SYS_TEXT_BASE = 0xa1fe0000 diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c index 2c5112521be..e658c3529a8 100644 --- a/board/innokom/innokom.c +++ b/board/innokom/innokom.c @@ -100,8 +100,9 @@ int misc_init_r(void) int board_init (void) { - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); gd->bd->bi_arch_number = MACH_TYPE_INNOKOM; gd->bd->bi_boot_params = 0xa0000100; @@ -110,21 +111,19 @@ int board_init (void) return 0; } - -/** - * dram_init: - setup dynamic RAM - * - * @return: 0 in case of success - */ - -int dram_init (void) +extern void pxa_dram_init(void); +int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; return 0; } +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; +} /** * innokom_set_led: - switch LEDs on or off diff --git a/board/innokom/lowlevel_init.S b/board/innokom/lowlevel_init.S deleted file mode 100644 index 55169be45ea..00000000000 --- a/board/innokom/lowlevel_init.S +++ /dev/null @@ -1,437 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/lowlevel_init.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - - -/* - * Memory setup - */ - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0, =GPSR0 - ldr r1, =CONFIG_SYS_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CONFIG_SYS_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CONFIG_SYS_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CONFIG_SYS_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CONFIG_SYS_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CONFIG_SYS_GPCR2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CONFIG_SYS_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CONFIG_SYS_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CONFIG_SYS_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CONFIG_SYS_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CONFIG_SYS_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CONFIG_SYS_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CONFIG_SYS_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CONFIG_SYS_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CONFIG_SYS_GAFR2_U_VAL - str r1, [r0] - - ldr r0, =PSSR /* enable GPIO pins */ - ldr r1, =CONFIG_SYS_PSSR_VAL - str r1, [r0] - -/* ldr r3, =MSC1 / low - bank 2 Lubbock Registers / SRAM */ -/* ldr r2, =CONFIG_SYS_MSC1_VAL / high - bank 3 Ethernet Controller */ -/* str r2, [r3] / need to set MSC1 before trying to write to the HEX LEDs */ -/* ldr r2, [r3] / need to read it back to make sure the value latches (see MSC section of manual) */ -/* */ -/* ldr r1, =LED_BLANK */ -/* mov r0, #0xFF */ -/* str r0, [r1] / turn on hex leds */ -/* */ -/*loop: */ -/* */ -/* ldr r0, =0xB0070001 */ -/* ldr r1, =_LED */ -/* str r0, [r1] / hex display */ - - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1, =MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2, =CONFIG_SYS_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ - /* that data latches */ - /* MSC1: nCS(2,3) */ - ldr r2, =CONFIG_SYS_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2, =CONFIG_SYS_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2, =CONFIG_SYS_MECR_VAL - str r2, [r1, #MECR_OFFSET] - ldr r2, [r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CONFIG_SYS_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - ldr r2, [r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CONFIG_SYS_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - ldr r2, [r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CONFIG_SYS_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - ldr r2, [r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CONFIG_SYS_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - ldr r2, [r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CONFIG_SYS_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - ldr r2, [r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CONFIG_SYS_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - ldr r2, [r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - - /* test if we run from flash or RAM - RAM/BDI: don't setup RAM */ - adr r3, mem_init /* r0 <- current position of code */ - ldr r2, =mem_init - cmp r3, r2 /* skip init if in place */ - beq initirqs - - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - /* Before accessing MDREFR we need a valid DRI field, so we set */ - /* this to power on defaults + DRI field. */ - - ldr r3, =CONFIG_SYS_MDREFR_VAL - ldr r2, =0xFFF - and r3, r3, r2 - ldr r4, =0x03ca4000 - orr r4, r4, r3 - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - /* FIXME: we use async mode for now */ - - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - /* Step 4a: assert MDREFR:K?RUN and configure */ - /* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */ - - ldr r4, =CONFIG_SYS_MDREFR_VAL - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Step 4b: de-assert MDREFR:SLFRSH. */ - - bic r4, r4, #(MDREFR_SLFRSH) - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4c: assert MDREFR:E1PIN and E0PIO */ - - orr r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ - /* configure but not enable each SDRAM partition pair. */ - - ldr r4, =CONFIG_SYS_MDCNFG_VAL - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - - str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ - ldr r4, [r1, #MDCNFG_OFFSET] - - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - /* There should 9 writes, since the first write doesn't */ - /* trigger a refresh cycle on PXA250. See Intel PXA250 and */ - /* PXA210 Processors Specification Update, */ - /* Jan 2003, Errata #116, page 30. */ - - - ldr r3, =CONFIG_SYS_DRAM_BASE - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* (MDCNFG:DEx set to 1). */ - - ldr r3, [r1, #MDCNFG_OFFSET] - orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) - str r3, [r1, #MDCNFG_OFFSET] - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CONFIG_SYS_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - - /* We are finished with Intel's memory controller initialisation */ - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r2, =ICMR /* mask all interrupts at the controller */ - str r1, [r2] - - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - /* (hard-coding at 398.12MHz for now). */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - /* Note: See label 'ENABLECLKS' for the re-enabling */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - - /* default value in case no valid rotary switch setting is found */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] - - /* enable the 32Khz oscillator for RTC and PowerManager */ -/* - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] -*/ - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b - - /* ---------------------------------------------------------------- */ - /* */ - /* ---------------------------------------------------------------- */ - - /* Save SDRAM size */ - ldr r1, =DRAM_SIZE - str r8, [r1] - - /* Interrupt init: Mask all interrupts */ - ldr r0, =ICMR /* enable no sources */ - mov r1, #0 - str r1, [r0] - - /* FIXME */ - -#ifndef DEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ -#endif - - /* ---------------------------------------------------------------- */ - /* End lowlevel_init */ - /* ---------------------------------------------------------------- */ - -endlowlevel_init: - - mov pc, lr diff --git a/include/configs/innokom.h b/include/configs/innokom.h index 007ccebf436..01522cdebd9 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -40,6 +40,8 @@ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* for timer/console/ethernet */ +#define CONFIG_SYS_TEXT_BASE 0x0 + /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_NO_DCACHE @@ -347,6 +349,9 @@ */ #define CONFIG_SYS_PSSR_VAL 0x37 +#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 +#define CONFIG_SYS_CKEN 0x0 + /* * Memory settings * @@ -480,6 +485,9 @@ #define CONFIG_SYS_MCIO0_VAL 0x00000000 #define CONFIG_SYS_MCIO1_VAL 0x00000000 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 + /* #define CSB226_USER_LED0 0x00000008 #define CSB226_USER_LED1 0x00000010 From 3c43ca2ae2a7ee28eca49369ff11da4996eedad6 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 20:55:44 +0200 Subject: [PATCH 031/116] PXA: lubbock: Fix for reloc Signed-off-by: Marek Vasut --- board/lubbock/Makefile | 10 +- board/lubbock/config.mk | 3 - board/lubbock/lowlevel_init.S | 411 ---------------------------------- board/lubbock/lubbock.c | 22 +- include/configs/lubbock.h | 8 +- 5 files changed, 22 insertions(+), 432 deletions(-) delete mode 100644 board/lubbock/config.mk delete mode 100644 board/lubbock/lowlevel_init.S diff --git a/board/lubbock/Makefile b/board/lubbock/Makefile index 65923070c41..2853bca8d77 100644 --- a/board/lubbock/Makefile +++ b/board/lubbock/Makefile @@ -27,17 +27,15 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := lubbock.o flash.o -SOBJS := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/lubbock/config.mk b/board/lubbock/config.mk deleted file mode 100644 index f30f695de2b..00000000000 --- a/board/lubbock/config.mk +++ /dev/null @@ -1,3 +0,0 @@ -#CONFIG_SYS_TEXT_BASE = 0xa1700000 -CONFIG_SYS_TEXT_BASE = 0xa3080000 -#CONFIG_SYS_TEXT_BASE = 0 diff --git a/board/lubbock/lowlevel_init.S b/board/lubbock/lowlevel_init.S deleted file mode 100644 index db6f69d36ea..00000000000 --- a/board/lubbock/lowlevel_init.S +++ /dev/null @@ -1,411 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/lowlevel_init.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - - -/* - * Memory setup - */ - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0, =GPSR0 - ldr r1, =CONFIG_SYS_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CONFIG_SYS_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CONFIG_SYS_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CONFIG_SYS_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CONFIG_SYS_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CONFIG_SYS_GPCR2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CONFIG_SYS_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CONFIG_SYS_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CONFIG_SYS_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CONFIG_SYS_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CONFIG_SYS_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CONFIG_SYS_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CONFIG_SYS_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CONFIG_SYS_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CONFIG_SYS_GAFR2_U_VAL - str r1, [r0] - - ldr r0, =PSSR /* enable GPIO pins */ - ldr r1, =CONFIG_SYS_PSSR_VAL - str r1, [r0] - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1, =MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2, =CONFIG_SYS_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ - /* that data latches */ - /* MSC1: nCS(2,3) */ - ldr r2, =CONFIG_SYS_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2, =CONFIG_SYS_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2, =CONFIG_SYS_MECR_VAL - str r2, [r1, #MECR_OFFSET] - ldr r2, [r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CONFIG_SYS_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - ldr r2, [r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CONFIG_SYS_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - ldr r2, [r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CONFIG_SYS_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - ldr r2, [r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CONFIG_SYS_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - ldr r2, [r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CONFIG_SYS_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - ldr r2, [r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CONFIG_SYS_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - ldr r2, [r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - /* Before accessing MDREFR we need a valid DRI field, so we set */ - /* this to power on defaults + DRI field. */ - - ldr r3, =CONFIG_SYS_MDREFR_VAL - ldr r2, =0xFFF - and r3, r3, r2 - ldr r4, =0x03ca4000 - orr r4, r4, r3 - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Note: preserve the mdrefr value in r4 */ - - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - /* FIXME: we use async mode for now */ - - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - /* set MDREFR according to user define with exception of a few bits */ - - ldr r4, =CONFIG_SYS_MDREFR_VAL - orr r4, r4, #(MDREFR_SLFRSH) - bic r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Step 4b: de-assert MDREFR:SLFRSH. */ - - bic r4, r4, #(MDREFR_SLFRSH) - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4c: assert MDREFR:E1PIN and E0PIO as desired */ - - ldr r4, =CONFIG_SYS_MDREFR_VAL - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ - /* configure but not enable each SDRAM partition pair. */ - - ldr r4, =CONFIG_SYS_MDCNFG_VAL - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - - str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ - ldr r4, [r1, #MDCNFG_OFFSET] - - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - ldr r3, =CONFIG_SYS_DRAM_BASE - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* (MDCNFG:DEx set to 1). */ - - ldr r3, [r1, #MDCNFG_OFFSET] - orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) - str r3, [r1, #MDCNFG_OFFSET] - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CONFIG_SYS_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - - /* We are finished with Intel's memory controller initialisation */ - - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r2, =ICMR /* mask all interrupts at the controller */ - str r1, [r2] - - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - /* (hard-coding at 398.12MHz for now). */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - /* Note: See label 'ENABLECLKS' for the re-enabling */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - - /* default value in case no valid rotary switch setting is found */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] - -#ifdef RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - /* ---------------------------------------------------------------- */ - /* */ - /* ---------------------------------------------------------------- */ - - /* Save SDRAM size */ - ldr r1, =DRAM_SIZE - str r8, [r1] - - /* Interrupt init: Mask all interrupts */ - ldr r0, =ICMR /* enable no sources */ - mov r1, #0 - str r1, [r0] - - /* FIXME */ - -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -#endif - - /* ---------------------------------------------------------------- */ - /* End lowlevel_init */ - /* ---------------------------------------------------------------- */ - -endlowlevel_init: - - mov pc, lr diff --git a/board/lubbock/lubbock.c b/board/lubbock/lubbock.c index d8d6ffbf617..f791c5b9040 100644 --- a/board/lubbock/lubbock.c +++ b/board/lubbock/lubbock.c @@ -36,8 +36,9 @@ DECLARE_GLOBAL_DATA_PTR; int board_init (void) { - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); /* arch number of Lubbock-Board */ gd->bd->bi_arch_number = MACH_TYPE_LUBBOCK; @@ -55,19 +56,18 @@ int board_late_init(void) return 0; } +extern void pxa_dram_init(void); +int dram_init(void) +{ + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} -int dram_init (void) +void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; - gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; - - return 0; } #ifdef CONFIG_CMD_NET diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 3a99ec25c4b..62f9691983e 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -43,7 +43,7 @@ #define CONFIG_MMC #define BOARD_LATE_INIT 1 #define CONFIG_DOS_PARTITION - +#define CONFIG_SYS_TEXT_BASE 0x0 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* we will never enable dcache, because we have to setup MMU first */ @@ -202,6 +202,9 @@ #define CONFIG_SYS_PSSR_VAL 0x20 +#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 +#define CONFIG_SYS_CKEN 0x0 + /* * Memory settings */ @@ -212,6 +215,9 @@ #define CONFIG_SYS_MDREFR_VAL 0x00018018 #define CONFIG_SYS_MDMRS_VAL 0x00000000 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 + /* * PCMCIA and CF Interfaces */ From d2942ee5e354138bfa2778e2ab35e480b9f1ec33 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 21:04:13 +0200 Subject: [PATCH 032/116] PXA: palmld: Fix for reloc Signed-off-by: Marek Vasut --- board/palmld/Makefile | 10 +++---- board/palmld/config.mk | 1 - board/palmld/lowlevel_init.S | 45 ----------------------------- board/palmld/palmld.c | 16 +++++++++-- board/palmld/u-boot.lds | 56 ------------------------------------ include/configs/palmld.h | 1 + 6 files changed, 18 insertions(+), 111 deletions(-) delete mode 100644 board/palmld/config.mk delete mode 100644 board/palmld/lowlevel_init.S delete mode 100644 board/palmld/u-boot.lds diff --git a/board/palmld/Makefile b/board/palmld/Makefile index bcb014db62d..0cca8ab9ec2 100644 --- a/board/palmld/Makefile +++ b/board/palmld/Makefile @@ -24,17 +24,15 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := palmld.o -SOBJS := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/palmld/config.mk b/board/palmld/config.mk deleted file mode 100644 index 1d650acd993..00000000000 --- a/board/palmld/config.mk +++ /dev/null @@ -1 +0,0 @@ -TEXT_BASE = 0xa1000000 diff --git a/board/palmld/lowlevel_init.S b/board/palmld/lowlevel_init.S deleted file mode 100644 index e3382ee2f24..00000000000 --- a/board/palmld/lowlevel_init.S +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Palm LifeDrive Lowlevel Hardware Initialization - * - * Copyright (C) 2010 Marek Vasut - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -.globl lowlevel_init -lowlevel_init: - pxa_gpio_setup - - /* Enable GPIO reset */ - ldr r0, =PCFR - mov r1, #0x30 - str r1, [r0] - - pxa_wait_ticks 0x8000 - pxa_mem_setup - pxa_wakeup - pxa_intr_setup - pxa_clock_setup - - mov pc, lr diff --git a/board/palmld/palmld.c b/board/palmld/palmld.c index 4f0087ea27b..5588fe732f2 100644 --- a/board/palmld/palmld.c +++ b/board/palmld/palmld.c @@ -33,7 +33,11 @@ DECLARE_GLOBAL_DATA_PTR; int board_init(void) { - /* arch number of Lubbock-Board */ + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); + + /* arch number of PalmLD */ gd->bd->bi_arch_number = MACH_TYPE_PALMLD; /* adress of boot parameters */ @@ -52,12 +56,18 @@ struct serial_device *default_serial_console(void) return &serial_ffuart_device; } +extern void pxa_dram_init(void); int dram_init(void) +{ + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} + +void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; } ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) diff --git a/board/palmld/u-boot.lds b/board/palmld/u-boot.lds deleted file mode 100644 index fb4358beeab..00000000000 --- a/board/palmld/u-boot.lds +++ /dev/null @@ -1,56 +0,0 @@ -/* - * (C) Copyright 2000-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - cpu/pxa/start.o (.text) - *(.text) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { *(.data) } - - . = ALIGN(4); - .got : { *(.got) } - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = ALIGN(4); - __bss_start = .; - .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } - _end = .; -} diff --git a/include/configs/palmld.h b/include/configs/palmld.h index 926728b15f4..a2310a97bab 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -34,6 +34,7 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_MALLOC_LEN (128*1024) #define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_TEXT_BASE 0x0 #define CONFIG_BOOTCOMMAND \ "if mmcinfo && fatload mmc 0 0xa0000000 uboot.script ; then " \ From 0f7c54fba9e6dde14c3f184b1461b7d60a193b33 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 21:06:23 +0200 Subject: [PATCH 033/116] PXA: palmtc: Fix for reloc Signed-off-by: Marek Vasut --- board/palmtc/Makefile | 9 +++--- board/palmtc/config.mk | 1 - board/palmtc/lowlevel_init.S | 39 ------------------------- board/palmtc/palmtc.c | 13 ++++++++- board/palmtc/u-boot.lds | 56 ------------------------------------ include/configs/palmtc.h | 1 + 6 files changed, 17 insertions(+), 102 deletions(-) delete mode 100644 board/palmtc/config.mk delete mode 100644 board/palmtc/lowlevel_init.S delete mode 100644 board/palmtc/u-boot.lds diff --git a/board/palmtc/Makefile b/board/palmtc/Makefile index 20ac4e154c1..3a12e661756 100644 --- a/board/palmtc/Makefile +++ b/board/palmtc/Makefile @@ -24,17 +24,16 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := palmtc.o -SOBJS := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/palmtc/config.mk b/board/palmtc/config.mk deleted file mode 100644 index 1d650acd993..00000000000 --- a/board/palmtc/config.mk +++ /dev/null @@ -1 +0,0 @@ -TEXT_BASE = 0xa1000000 diff --git a/board/palmtc/lowlevel_init.S b/board/palmtc/lowlevel_init.S deleted file mode 100644 index 74050dc70cb..00000000000 --- a/board/palmtc/lowlevel_init.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Palm Tungsten|C Lowlevel Hardware Initialization - * - * Copyright (C) 2010 Marek Vasut - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -.globl lowlevel_init -lowlevel_init: - pxa_gpio_setup - pxa_wait_ticks 0x8000 - pxa_mem_setup - pxa_wakeup - pxa_intr_setup - pxa_clock_setup - - mov pc, lr diff --git a/board/palmtc/palmtc.c b/board/palmtc/palmtc.c index 04cb33e6a89..25186aefa8c 100644 --- a/board/palmtc/palmtc.c +++ b/board/palmtc/palmtc.c @@ -32,6 +32,10 @@ DECLARE_GLOBAL_DATA_PTR; int board_init(void) { + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); + /* Arch number of Palm Tungsten|C */ gd->bd->bi_arch_number = MACH_TYPE_PALMTC; @@ -51,9 +55,16 @@ struct serial_device *default_serial_console(void) return &serial_ffuart_device; } +extern void pxa_dram_init(void); int dram_init(void) +{ + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} + +void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - return 0; } diff --git a/board/palmtc/u-boot.lds b/board/palmtc/u-boot.lds deleted file mode 100644 index fb4358beeab..00000000000 --- a/board/palmtc/u-boot.lds +++ /dev/null @@ -1,56 +0,0 @@ -/* - * (C) Copyright 2000-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - cpu/pxa/start.o (.text) - *(.text) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { *(.data) } - - . = ALIGN(4); - .got : { *(.got) } - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = ALIGN(4); - __bss_start = .; - .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } - _end = .; -} diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index fe87648ac60..40ab0bf2c09 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -36,6 +36,7 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_MALLOC_LEN (128*1024) #define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_TEXT_BASE 0x0 #define CONFIG_BOOTCOMMAND \ "if mmc init && fatload mmc 0 0xa0000000 uboot.script ; then " \ From 08eb21ee32839c48a5566286c89266b217e4b754 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 21:10:25 +0200 Subject: [PATCH 034/116] PXA: pleb2: Fix for reloc Signed-off-by: Marek Vasut --- board/pleb2/Makefile | 10 +- board/pleb2/config.mk | 3 - board/pleb2/lowlevel_init.S | 488 ------------------------------------ board/pleb2/pleb2.c | 22 +- include/configs/pleb2.h | 18 +- 5 files changed, 23 insertions(+), 518 deletions(-) delete mode 100644 board/pleb2/config.mk delete mode 100644 board/pleb2/lowlevel_init.S diff --git a/board/pleb2/Makefile b/board/pleb2/Makefile index faa26911b82..cb0c3d7cb90 100644 --- a/board/pleb2/Makefile +++ b/board/pleb2/Makefile @@ -27,17 +27,15 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := pleb2.o flash.o -SOBJS := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/pleb2/config.mk b/board/pleb2/config.mk deleted file mode 100644 index 079f58eb2f5..00000000000 --- a/board/pleb2/config.mk +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0xa1F80000 -#CONFIG_SYS_TEXT_BASE = 0xa3080000 -#CONFIG_SYS_TEXT_BASE = 0 diff --git a/board/pleb2/lowlevel_init.S b/board/pleb2/lowlevel_init.S deleted file mode 100644 index b95ff9cf2fa..00000000000 --- a/board/pleb2/lowlevel_init.S +++ /dev/null @@ -1,488 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - - /* Set up GPIO pins first */ - - ldr r0, =GPSR0 - ldr r1, =CONFIG_SYS_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CONFIG_SYS_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CONFIG_SYS_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CONFIG_SYS_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CONFIG_SYS_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CONFIG_SYS_GPCR2_VAL - str r1, [r0] - - ldr r0, =GRER0 - ldr r1, =CONFIG_SYS_GRER0_VAL - str r1, [r0] - - ldr r0, =GRER1 - ldr r1, =CONFIG_SYS_GRER1_VAL - str r1, [r0] - - ldr r0, =GRER2 - ldr r1, =CONFIG_SYS_GRER2_VAL - str r1, [r0] - - ldr r0, =GFER0 - ldr r1, =CONFIG_SYS_GFER0_VAL - str r1, [r0] - - ldr r0, =GFER1 - ldr r1, =CONFIG_SYS_GFER1_VAL - str r1, [r0] - - ldr r0, =GFER2 - ldr r1, =CONFIG_SYS_GFER2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CONFIG_SYS_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CONFIG_SYS_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CONFIG_SYS_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CONFIG_SYS_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CONFIG_SYS_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CONFIG_SYS_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CONFIG_SYS_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CONFIG_SYS_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CONFIG_SYS_GAFR2_U_VAL - str r1, [r0] - - /* enable GPIO pins */ - ldr r0, =PSSR - ldr r1, =CONFIG_SYS_PSSR_VAL - str r1, [r0] - - -/********************************************************************* - Initlialize Memory Controller - - See PXA250 Operating System Developer's Guide - - pause for 200 uSecs- allow internal clocks to settle - *Note: only need this if hard reset... doing it anyway for now -*/ - - @ Step 1 - @ ---- Wait 200 usec - ldr r3, =OSCR @ reset the OS Timer Count to zero - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - @ get memory controller base address - ldr r1, =MEMC_BASE - -@**************************************************************************** -@ Step 2 -@ - - @ Step 2a - @ write msc0, read back to ensure data latches - @ - ldr r2, =CONFIG_SYS_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] - - @ write msc1 - ldr r2, =CONFIG_SYS_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - @ write msc2 - ldr r2, =CONFIG_SYS_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - -@ Step 2b - @ write mecr - ldr r2, =CONFIG_SYS_MECR_VAL - str r2, [r1, #MECR_OFFSET] - - @ write mcmem0 - ldr r2, =CONFIG_SYS_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - - @ write mcmem1 - ldr r2, =CONFIG_SYS_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - - @ write mcatt0 - ldr r2, =CONFIG_SYS_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - - @ write mcatt1 - ldr r2, =CONFIG_SYS_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - - @ write mcio0 - ldr r2, =CONFIG_SYS_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - - @ write mcio1 - ldr r2, =CONFIG_SYS_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - -@ Step 2c - @ fly-by-dma is defeatured on this part - @ write flycnfg - @ldr r2, =CONFIG_SYS_FLYCNFG_VAL - @str r2, [r1, #FLYCNFG_OFFSET] - -/* FIXME Does this sequence really make sense */ -#ifdef REDBOOT_WAY - @ Step 2d - @ get the mdrefr settings - ldr r3, =CONFIG_SYS_MDREFR_VAL - - @ extract DRI field (we need a valid DRI field) - @ - ldr r2, =0xFFF - - @ valid DRI field in r3 - @ - and r3, r3, r2 - - @ get the reset state of MDREFR - @ - ldr r4, [r1, #MDREFR_OFFSET] - - @ clear the DRI field - @ - bic r4, r4, r2 - - @ insert the valid DRI field loaded above - @ - orr r4, r4, r3 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ *Note: preserve the mdrefr value in r4 * - -@**************************************************************************** -@ Step 3 -@ -@ NO SRAM - - mov pc, r10 - - -@**************************************************************************** -@ Step 4 -@ - - @ Assumes previous mdrefr value in r4, if not then read current mdrefr - - @ clear the free-running clock bits - @ (clear K0Free, K1Free, K2Free - @ - bic r4, r4, #(0x00800000 | 0x01000000 | 0x02000000) - - @ set K0RUN for CPLD clock - @ - orr r4, r4, #0x00002000 - - @ set K1RUN if bank 0 installed - @ - orr r4, r4, #0x00010000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #0x00400000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ - orr r4, r4, #0x00008000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop -#else - @ Step 2d - @ get the mdrefr settings - ldr r3, =CONFIG_SYS_MDREFR_VAL - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ Step 4 - - @ set K0RUN for CPLD clock - @ - orr r4, r4, #0x00002000 - - @ set K1RUN for bank 0 - @ - orr r4, r4, #0x00010000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #0x00400000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ - orr r4, r4, #0x00008000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop -#endif - - @ Step 4d - @ fetch platform value of mdcnfg - @ - ldr r2, =CONFIG_SYS_MDCNFG_VAL - - @ disable all sdram banks - @ - bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) - bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) - - @ program banks 0/1 for bus width - @ - bic r2, r2, #MDCNFG_DWID0 @0=32-bit - - @ write initial value of mdcnfg, w/o enabling sdram banks - @ - str r2, [r1, #MDCNFG_OFFSET] - - @ Step 4e - @ pause for 200 uSecs - @ - ldr r3, =OSCR @ reset the OS Timer Count to zero - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty - 1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - /* Why is this here??? */ - mov r0, #0x78 @turn everything off - mcr p15, 0, r0, c1, c0, 0 @(caches off, MMU off, etc.) - - @ Step 4f - @ Access memory *not yet enabled* for CBR refresh cycles (8) - @ - CBR is generated for all banks - - ldr r2, =CONFIG_SYS_DRAM_BASE - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - - @ Step 4g - @get memory controller base address - @ - ldr r1, =MEMC_BASE - - @fetch current mdcnfg value - @ - ldr r3, [r1, #MDCNFG_OFFSET] - - @enable sdram bank 0 if installed (must do for any populated bank) - @ - orr r3, r3, #MDCNFG_DE0 - - @write back mdcnfg, enabling the sdram bank(s) - @ - str r3, [r1, #MDCNFG_OFFSET] - - @ Step 4h - @ write mdmrs - @ - ldr r2, =CONFIG_SYS_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - @ Done Memory Init - - /*SET_LED 6 */ - - @******************************************************************** - @ Disable (mask) all interrupts at the interrupt controller - @ - - @ clear the interrupt level register (use IRQ, not FIQ) - @ - mov r1, #0 - ldr r2, =ICLR - str r1, [r2] - - @ Set interrupt mask register - @ - ldr r1, =CONFIG_SYS_ICMR_VAL - ldr r2, =ICMR - str r1, [r2] - - @ ******************************************************************** - @ Disable the peripheral clocks, and set the core clock - @ - - @ Turn Off ALL on-chip peripheral clocks for re-configuration - @ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - @ set core clocks - @ - ldr r2, =CONFIG_SYS_CCCR_VAL - ldr r1, =CCCR - str r2, [r1] - - #ifdef ENABLE32KHZ - @ enable the 32Khz oscillator for RTC and PowerManager - @ - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - @ NOTE: spin here until OSCC.OOK get set, - @ meaning the PLL has settled. - @ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - @ Turn on needed clocks - @ - ldr r1, =CKEN - ldr r2, =CONFIG_SYS_CKEN_VAL - str r2, [r1] - - /*SET_LED 7 */ - -/* Is this needed???? */ -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -#endif - - mov pc, r10 - -@ End lowlevel_init diff --git a/board/pleb2/pleb2.c b/board/pleb2/pleb2.c index 97c37eaa393..5a16cc76e81 100644 --- a/board/pleb2/pleb2.c +++ b/board/pleb2/pleb2.c @@ -36,8 +36,9 @@ DECLARE_GLOBAL_DATA_PTR; int board_init (void) { - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); /* arch number of Lubbock-Board */ gd->bd->bi_arch_number = MACH_TYPE_PLEB2; @@ -55,17 +56,16 @@ int board_late_init(void) return 0; } +extern void pxa_dram_init(void); +int dram_init(void) +{ + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} -int dram_init (void) +void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; - gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; - - return 0; } diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index 3b6e60afe9f..b366f381b11 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -39,6 +39,7 @@ #undef CONFIG_LCD #undef CONFIG_MMC #define BOARD_LATE_INIT 1 +#define CONFIG_SYS_TEXT_BASE 0x0 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ @@ -155,15 +156,9 @@ /* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ @@ -213,9 +208,9 @@ #define CONFIG_SYS_GAFR2_U_VAL 0x00000000 #define CONFIG_SYS_PSSR_VAL 0x20 -#define CONFIG_SYS_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */ -#define CONFIG_SYS_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */ -#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_CCCR 0x00000141 /* 100 MHz memory, 200 MHz CPU */ +#define CONFIG_SYS_CKEN 0x00000060 /* FFUART and STUART enabled */ +#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ /* * Memory settings @@ -231,6 +226,9 @@ /* bits set in lowlevel_init.S */ #define CONFIG_SYS_MDMRS_VAL 0x00000000 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 + /* * PCMCIA and CF Interfaces */ From 65bd6a9099febd4ca2e09c4d2fe3dcfc8a476a07 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 21:20:07 +0200 Subject: [PATCH 035/116] PXA: pxa255_idp: Fix for reloc Signed-off-by: Marek Vasut --- board/pxa255_idp/Makefile | 10 +- board/pxa255_idp/config.mk | 3 - board/pxa255_idp/lowlevel_init.S | 496 ------------------------------- board/pxa255_idp/pxa_idp.c | 25 +- include/configs/pxa255_idp.h | 8 +- 5 files changed, 23 insertions(+), 519 deletions(-) delete mode 100644 board/pxa255_idp/config.mk delete mode 100644 board/pxa255_idp/lowlevel_init.S diff --git a/board/pxa255_idp/Makefile b/board/pxa255_idp/Makefile index 4892b42bc15..2835f37554c 100644 --- a/board/pxa255_idp/Makefile +++ b/board/pxa255_idp/Makefile @@ -27,17 +27,15 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := pxa_idp.o -SOBJS := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/pxa255_idp/config.mk b/board/pxa255_idp/config.mk deleted file mode 100644 index f30f695de2b..00000000000 --- a/board/pxa255_idp/config.mk +++ /dev/null @@ -1,3 +0,0 @@ -#CONFIG_SYS_TEXT_BASE = 0xa1700000 -CONFIG_SYS_TEXT_BASE = 0xa3080000 -#CONFIG_SYS_TEXT_BASE = 0 diff --git a/board/pxa255_idp/lowlevel_init.S b/board/pxa255_idp/lowlevel_init.S deleted file mode 100644 index a50760fea40..00000000000 --- a/board/pxa255_idp/lowlevel_init.S +++ /dev/null @@ -1,496 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/lowlevel_init.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - -/* - * Memory setup - */ -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - -#ifdef DEBUG_BLINK_ENABLE - /* 3rd blink */ - bl blink -#endif - - /* Set up GPIO pins first ----------------------------------------- */ - ldr r0, =GPSR0 - ldr r1, =CONFIG_SYS_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CONFIG_SYS_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CONFIG_SYS_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CONFIG_SYS_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CONFIG_SYS_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CONFIG_SYS_GPCR2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CONFIG_SYS_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CONFIG_SYS_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CONFIG_SYS_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CONFIG_SYS_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CONFIG_SYS_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CONFIG_SYS_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CONFIG_SYS_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CONFIG_SYS_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CONFIG_SYS_GAFR2_U_VAL - str r1, [r0] - - ldr r0, =PSSR /* enable GPIO pins */ - ldr r1, =CONFIG_SYS_PSSR_VAL - str r1, [r0] - -#ifdef DEBUG_BLINK_ENABLE - /* 4th debug blink */ - bl blink -#endif - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1, =MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2, =CONFIG_SYS_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ - /* that data latches */ - /* MSC1: nCS(2,3) */ - ldr r2, =CONFIG_SYS_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2, =CONFIG_SYS_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2, =CONFIG_SYS_MECR_VAL - str r2, [r1, #MECR_OFFSET] - ldr r2, [r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CONFIG_SYS_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - ldr r2, [r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CONFIG_SYS_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - ldr r2, [r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CONFIG_SYS_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - ldr r2, [r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CONFIG_SYS_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - ldr r2, [r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CONFIG_SYS_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - ldr r2, [r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CONFIG_SYS_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - ldr r2, [r1, #MCIO1_OFFSET] - -#ifdef DEBUG_BLINK_ENABLE - /* 5th blink */ - bl blink -#endif - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - /* Before accessing MDREFR we need a valid DRI field, so we set */ - /* this to power on defaults + DRI field. */ - - ldr r3, =CONFIG_SYS_MDREFR_VAL - ldr r2, =0xFFF - and r3, r3, r2 - ldr r4, =0x03ca4000 - orr r4, r4, r3 - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Note: preserve the mdrefr value in r4 */ - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - /* FIXME: we use async mode for now */ - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - /* set MDREFR according to user define with exception of a few bits */ - - ldr r4, =CONFIG_SYS_MDREFR_VAL - orr r4, r4, #(MDREFR_SLFRSH) - bic r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Step 4b: de-assert MDREFR:SLFRSH. */ - - bic r4, r4, #(MDREFR_SLFRSH) - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Step 4c: assert MDREFR:E1PIN and E0PIO as desired */ - - ldr r4, =CONFIG_SYS_MDREFR_VAL - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - - /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ - /* configure but not enable each SDRAM partition pair. */ - - ldr r4, =CONFIG_SYS_MDCNFG_VAL - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - - str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ - ldr r4, [r1, #MDCNFG_OFFSET] - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - ldr r3, =CONFIG_SYS_DRAM_BASE - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* (MDCNFG:DEx set to 1). */ - - ldr r3, [r1, #MDCNFG_OFFSET] - orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) - str r3, [r1, #MDCNFG_OFFSET] - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CONFIG_SYS_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - /* We are finished with Intel's memory controller initialisation */ -#if 0 - /* FIXME turn on serial ports */ - /* look into moving this to board_init() */ - ldr r2, =(PXA_CS5_PHYS + 0x03C0002c) - mov r3, #0x13 - str r3, [r2] -#endif - -#ifdef DEBUG_BLINK_ENABLE - /* 6th blink */ - bl blink -#endif - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r2, =ICMR /* mask all interrupts at the controller */ - str r1, [r2] - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - /* (hard-coding at 398.12MHz for now). */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - /* Note: See label 'ENABLECLKS' for the re-enabling */ -#if 0 - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - /* default value in case no valid rotary switch setting is found */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] - -#endif - -#ifdef RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - /* ---------------------------------------------------------------- */ - /* */ - /* ---------------------------------------------------------------- */ - - /* Save SDRAM size */ - ldr r1, =DRAM_SIZE - str r8, [r1] - - /* Interrupt init: Mask all interrupts */ - ldr r0, =ICMR /* enable no sources */ - mov r1, #0 - str r1, [r0] - - /* FIXME */ - -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ -#endif - - /* ---------------------------------------------------------------- */ - /* End memsetup */ - /* ---------------------------------------------------------------- */ - -#ifdef DEBUG_BLINK_ENABLE - /* 7th blink */ - bl blink -#endif - -endlowlevel_init: - - mov pc, r10 - - -#ifdef DEBUG_BLINK_ENABLE - -/* debug LED code */ - -/* delay about 200ms */ -delay: - - /* reset OSCR to 0 */ - ldr r8, =OSCR - mov r9, #0 - str r9, [r8] - - /* make sure new value has stuck */ -1: - ldr r8, =OSCR - ldr r9, [r8] - mov r8, #0x10000 - cmp r9, r8 - bgt 1b - - /* now, wait for delay to expire */ -1: - ldr r8, =OSCR - ldr r9, [r8] - mov r8, #0xd4000 - cmp r8, r9 - bgt 1b - - mov pc, lr - -/* blink code -- trashes r7, r8, r9 */ - -.globl blink -blink: - - mov r7, lr - - /* set GPIO10 as outout */ - ldr r8, =GPDR0 - ldr r9, [r8] - orr r9, r9, #(1<<10) - str r9, [r8] - - /* turn LED off */ - mov r9, #(1<<10) - ldr r8, =GPCR0 - str r9, [r8] - bl delay - - /* turn LED on */ - mov r9, #(1<<10) - ldr r8, =GPSR0 - str r9, [r8] - bl delay - - /* turn LED off */ - mov r9, #(1<<10) - ldr r8, =GPCR0 - str r9, [r8] - - mov pc, r7 - -#endif diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c index 4ab8bd494f6..804d09c22bd 100644 --- a/board/pxa255_idp/pxa_idp.c +++ b/board/pxa255_idp/pxa_idp.c @@ -43,8 +43,9 @@ DECLARE_GLOBAL_DATA_PTR; int board_init (void) { - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); /* arch number of Lubbock-Board */ gd->bd->bi_arch_number = MACH_TYPE_PXA_IDP; @@ -82,21 +83,19 @@ int board_late_init(void) return 0; } - -int dram_init (void) +extern void pxa_dram_init(void); +int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; - gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; - + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; return 0; } +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; +} #ifdef DEBUG_BLINKC_ENABLE diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 4581674ed3a..b4327c621c9 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -43,6 +43,7 @@ */ #undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */ #undef CONFIG_SKIP_RELOCATE_UBOOT /* define for developing */ +#define CONFIG_SYS_TEXT_BASE 0x0 /* * define the following to enable debug blinks. A debug blink function @@ -271,7 +272,7 @@ /* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 1 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ #define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ @@ -317,6 +318,9 @@ #define CONFIG_SYS_PSSR_VAL 0x20 +#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 +#define CONFIG_SYS_CKEN 0x0 + /* * Memory settings */ @@ -326,6 +330,8 @@ #define CONFIG_SYS_MDCNFG_VAL 0x090009C9 #define CONFIG_SYS_MDREFR_VAL 0x0085C017 #define CONFIG_SYS_MDMRS_VAL 0x00220022 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 /* * PCMCIA and CF Interfaces From cc72ac660de1979fced752bf740afb54cb3bed0a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 21:28:14 +0200 Subject: [PATCH 036/116] PXA: trizepsiv: Fix for reloc Signed-off-by: Marek Vasut --- board/trizepsiv/Makefile | 10 +- board/trizepsiv/config.mk | 3 - board/trizepsiv/conxs.c | 23 +- board/trizepsiv/lowlevel_init.S | 503 -------------------------------- board/trizepsiv/pxavoltage.S | 29 -- include/configs/trizepsiv.h | 1 + 6 files changed, 17 insertions(+), 552 deletions(-) delete mode 100644 board/trizepsiv/config.mk delete mode 100644 board/trizepsiv/lowlevel_init.S delete mode 100644 board/trizepsiv/pxavoltage.S diff --git a/board/trizepsiv/Makefile b/board/trizepsiv/Makefile index 44c0d495ef2..060ac890f7c 100644 --- a/board/trizepsiv/Makefile +++ b/board/trizepsiv/Makefile @@ -26,17 +26,15 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := conxs.o eeprom.o -SOBJS := lowlevel_init.o pxavoltage.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/trizepsiv/config.mk b/board/trizepsiv/config.mk deleted file mode 100644 index f04eb74efdc..00000000000 --- a/board/trizepsiv/config.mk +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_SYS_TEXT_BASE =0xa1f00000 -# 0xa1700000 -#CONFIG_SYS_TEXT_BASE = 0 diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c index 0c67367a5fc..99f665b4727 100644 --- a/board/trizepsiv/conxs.c +++ b/board/trizepsiv/conxs.c @@ -104,8 +104,9 @@ void usb_board_stop(void) int board_init (void) { - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); /* arch number of ConXS Board */ gd->bd->bi_arch_number = 776; @@ -138,18 +139,18 @@ struct serial_device *default_serial_console (void) return &serial_ffuart_device; } -int dram_init (void) +extern void pxa_dram_init(void); +int dram_init(void) +{ + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} + +void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; - gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; - - return 0; } #ifdef CONFIG_DRIVER_DM9000 diff --git a/board/trizepsiv/lowlevel_init.S b/board/trizepsiv/lowlevel_init.S deleted file mode 100644 index 128d5540761..00000000000 --- a/board/trizepsiv/lowlevel_init.S +++ /dev/null @@ -1,503 +0,0 @@ -/* - * This was originally from the Lubbock u-boot port. - * - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/lowlevel_init.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - - -/* - * Memory setup - */ - -.globl lowlevel_init -lowlevel_init: - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0, =GPSR0 - ldr r1, =CONFIG_SYS_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CONFIG_SYS_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CONFIG_SYS_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPSR3 - ldr r1, =CONFIG_SYS_GPSR3_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CONFIG_SYS_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CONFIG_SYS_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CONFIG_SYS_GPCR2_VAL - str r1, [r0] - - ldr r0, =GPCR3 - ldr r1, =CONFIG_SYS_GPCR3_VAL - str r1, [r0] - - ldr r0, =GRER0 - ldr r1, =CONFIG_SYS_GRER0_VAL - str r1, [r0] - - ldr r0, =GRER1 - ldr r1, =CONFIG_SYS_GRER1_VAL - str r1, [r0] - - ldr r0, =GRER2 - ldr r1, =CONFIG_SYS_GRER2_VAL - str r1, [r0] - - ldr r0, =GRER3 - ldr r1, =CONFIG_SYS_GRER3_VAL - str r1, [r0] - - ldr r0, =GFER0 - ldr r1, =CONFIG_SYS_GFER0_VAL - str r1, [r0] - - ldr r0, =GFER1 - ldr r1, =CONFIG_SYS_GFER1_VAL - str r1, [r0] - - ldr r0, =GFER2 - ldr r1, =CONFIG_SYS_GFER2_VAL - str r1, [r0] - - ldr r0, =GFER3 - ldr r1, =CONFIG_SYS_GFER3_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CONFIG_SYS_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CONFIG_SYS_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CONFIG_SYS_GPDR2_VAL - str r1, [r0] - - ldr r0, =GPDR3 - ldr r1, =CONFIG_SYS_GPDR3_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CONFIG_SYS_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CONFIG_SYS_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CONFIG_SYS_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CONFIG_SYS_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CONFIG_SYS_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CONFIG_SYS_GAFR2_U_VAL - str r1, [r0] - - ldr r0, =GAFR3_L - ldr r1, =CONFIG_SYS_GAFR3_L_VAL - str r1, [r0] - - ldr r0, =GAFR3_U - ldr r1, =CONFIG_SYS_GAFR3_U_VAL - str r1, [r0] - - ldr r0, =PSSR /* enable GPIO pins */ - ldr r1, =CONFIG_SYS_PSSR_VAL - str r1, [r0] - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1, =MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2, =CONFIG_SYS_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ - /* that data latches */ - /* MSC1: nCS(2,3) */ - ldr r2, =CONFIG_SYS_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2, =CONFIG_SYS_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2, =CONFIG_SYS_MECR_VAL - str r2, [r1, #MECR_OFFSET] - ldr r2, [r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CONFIG_SYS_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - ldr r2, [r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CONFIG_SYS_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - ldr r2, [r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CONFIG_SYS_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - ldr r2, [r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CONFIG_SYS_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - ldr r2, [r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CONFIG_SYS_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - ldr r2, [r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CONFIG_SYS_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - ldr r2, [r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - ldr r2, =CONFIG_SYS_FLYCNFG_VAL - str r2, [r1, #FLYCNFG_OFFSET] - str r2, [r1, #FLYCNFG_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - /* Before accessing MDREFR we need a valid DRI field, so we set */ - /* this to power on defaults + DRI field. */ - - ldr r4, [r1, #MDREFR_OFFSET] - ldr r2, =0xFFF - bic r4, r4, r2 - - ldr r3, =CONFIG_SYS_MDREFR_VAL - and r3, r3, r2 - - orr r4, r4, r3 - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - - orr r4, r4, #MDREFR_K0RUN - orr r4, r4, #MDREFR_K0DB4 - orr r4, r4, #MDREFR_K0FREE - orr r4, r4, #MDREFR_K0DB2 - orr r4, r4, #MDREFR_K1DB2 - bic r4, r4, #MDREFR_K1FREE - bic r4, r4, #MDREFR_K2FREE - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Note: preserve the mdrefr value in r4 */ - - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - ldr r2, =CONFIG_SYS_SXCNFG_VAL - str r2, [r1, #SXCNFG_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - bic r4, r4, #(MDREFR_K2FREE |MDREFR_K1FREE | MDREFR_K0FREE) - - orr r4, r4, #MDREFR_K1RUN - bic r4, r4, #MDREFR_K2DB2 - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - bic r4, r4, #MDREFR_SLFRSH - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - orr r4, r4, #MDREFR_E1PIN - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - nop - nop - - - /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ - /* configure but not enable each SDRAM partition pair. */ - - ldr r4, =CONFIG_SYS_MDCNFG_VAL - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) - - str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ - ldr r4, [r1, #MDCNFG_OFFSET] - - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - ldr r3, =CONFIG_SYS_DRAM_BASE - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* (MDCNFG:DEx set to 1). */ - - ldr r3, [r1, #MDCNFG_OFFSET] - mov r4, r3 - orr r3, r3, #MDCNFG_DE0 - str r3, [r1, #MDCNFG_OFFSET] - mov r0, r3 - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CONFIG_SYS_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - /* enable APD */ - ldr r3, [r1, #MDREFR_OFFSET] - orr r3, r3, #MDREFR_APD - str r3, [r1, #MDREFR_OFFSET] - - /* We are finished with Intel's memory controller initialisation */ - - -setvoltage: - - mov r10, lr - bl initPXAvoltage /* In case the board is rebooting with a */ - mov lr, r10 /* low voltage raise it up to a good one. */ - -#if 1 - b initirqs -#endif - -wakeup: - /* Are we waking from sleep? */ - ldr r0, =RCSR - ldr r1, [r0] - and r1, r1, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR) - str r1, [r0] - teq r1, #RCSR_SMR - - bne initirqs - - ldr r0, =PSSR - mov r1, #PSSR_PH - str r1, [r0] - - /* if so, resume at PSPR */ - ldr r0, =PSPR - ldr r1, [r0] - mov pc, r1 - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r2, =ICMR /* mask all interrupts at the controller */ - str r1, [r2] - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - - /* Turn Off on-chip peripheral clocks (except for memory) */ - /* for re-configuration. */ - ldr r1, =CKEN - ldr r2, =CONFIG_SYS_CKEN - str r2, [r1] - - /* ... and write the core clock config register */ - ldr r2, =CONFIG_SYS_CCCR - ldr r1, =CCCR - str r2, [r1] - - /* Turn on turbo mode */ - mrc p14, 0, r2, c6, c0, 0 - orr r2, r2, #0xB /* Turbo, Fast-Bus, Freq change**/ - mcr p14, 0, r2, c6, c0, 0 - - /* Re-write MDREFR */ - ldr r1, =MEMC_BASE - ldr r2, [r1, #MDREFR_OFFSET] - str r2, [r1, #MDREFR_OFFSET] -#ifdef RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#else -#error "RTC not defined" -#endif - - /* Interrupt init: Mask all interrupts */ - ldr r0, =ICMR /* enable no sources */ - mov r1, #0 - str r1, [r0] - /* FIXME */ - -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ -#endif - - /* ---------------------------------------------------------------- */ - /* End lowlevel_init */ - /* ---------------------------------------------------------------- */ - -endlowlevel_init: - - mov pc, lr diff --git a/board/trizepsiv/pxavoltage.S b/board/trizepsiv/pxavoltage.S deleted file mode 100644 index 9659c2b0213..00000000000 --- a/board/trizepsiv/pxavoltage.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefano Babic, DENX Gmbh, sbabic@denx.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - - .global initPXAvoltage - -initPXAvoltage: - mov pc, lr diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index 474349537bd..ac3566cad16 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -44,6 +44,7 @@ #define CONFIG_MMC 1 #define BOARD_LATE_INIT 1 +#define CONFIG_SYS_TEXT_BASE 0x0 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ From 1123d4122da5522f52c801f8507b82992af5a19f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 21:54:19 +0200 Subject: [PATCH 037/116] PXA: xaeniax: Fix for reloc Signed-off-by: Marek Vasut --- board/xaeniax/Makefile | 10 +- board/xaeniax/config.mk | 2 - board/xaeniax/lowlevel_init.S | 424 ---------------------------------- board/xaeniax/xaeniax.c | 22 +- include/configs/xaeniax.h | 9 +- 5 files changed, 22 insertions(+), 445 deletions(-) delete mode 100644 board/xaeniax/config.mk delete mode 100644 board/xaeniax/lowlevel_init.S diff --git a/board/xaeniax/Makefile b/board/xaeniax/Makefile index 7dd2ea04a69..554915a6f98 100644 --- a/board/xaeniax/Makefile +++ b/board/xaeniax/Makefile @@ -26,17 +26,15 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := xaeniax.o flash.o -SOBJS := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/xaeniax/config.mk b/board/xaeniax/config.mk deleted file mode 100644 index c63975279bf..00000000000 --- a/board/xaeniax/config.mk +++ /dev/null @@ -1,2 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0xa3FB0000 -#CONFIG_SYS_TEXT_BASE = 0 diff --git a/board/xaeniax/lowlevel_init.S b/board/xaeniax/lowlevel_init.S deleted file mode 100644 index 57e16200501..00000000000 --- a/board/xaeniax/lowlevel_init.S +++ /dev/null @@ -1,424 +0,0 @@ - /* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/lowlevel_init.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0,=GPSR0 - ldr r1,=CONFIG_SYS_GPSR0_VAL - str r1,[r0] - - ldr r0,=GPSR1 - ldr r1,=CONFIG_SYS_GPSR1_VAL - str r1,[r0] - - ldr r0,=GPSR2 - ldr r1,=CONFIG_SYS_GPSR2_VAL - str r1,[r0] - - ldr r0,=GPCR0 - ldr r1,=CONFIG_SYS_GPCR0_VAL - str r1,[r0] - - ldr r0,=GPCR1 - ldr r1,=CONFIG_SYS_GPCR1_VAL - str r1,[r0] - - ldr r0,=GPCR2 - ldr r1,=CONFIG_SYS_GPCR2_VAL - str r1,[r0] - - ldr r0,=GPDR0 - ldr r1,=CONFIG_SYS_GPDR0_VAL - str r1,[r0] - - ldr r0,=GPDR1 - ldr r1,=CONFIG_SYS_GPDR1_VAL - str r1,[r0] - - ldr r0,=GPDR2 - ldr r1,=CONFIG_SYS_GPDR2_VAL - str r1,[r0] - - ldr r0,=GAFR0_L - ldr r1,=CONFIG_SYS_GAFR0_L_VAL - str r1,[r0] - - ldr r0,=GAFR0_U - ldr r1,=CONFIG_SYS_GAFR0_U_VAL - str r1,[r0] - - ldr r0,=GAFR1_L - ldr r1,=CONFIG_SYS_GAFR1_L_VAL - str r1,[r0] - - ldr r0,=GAFR1_U - ldr r1,=CONFIG_SYS_GAFR1_U_VAL - str r1,[r0] - - ldr r0,=GAFR2_L - ldr r1,=CONFIG_SYS_GAFR2_L_VAL - str r1,[r0] - - ldr r0,=GAFR2_U - ldr r1,=CONFIG_SYS_GAFR2_U_VAL - str r1,[r0] - - ldr r0,=PSSR /* enable GPIO pins */ - ldr r1,=CONFIG_SYS_PSSR_VAL - str r1,[r0] - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1,=MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2,=CONFIG_SYS_MSC0_VAL - str r2,[r1, #MSC0_OFFSET] - ldr r2,[r1, #MSC0_OFFSET] /* read back to ensure data latches */ - - /* MSC1: nCS(2,3) */ - ldr r2,=CONFIG_SYS_MSC1_VAL - str r2,[r1, #MSC1_OFFSET] - ldr r2,[r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2,=CONFIG_SYS_MSC2_VAL - str r2,[r1, #MSC2_OFFSET] - ldr r2,[r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2,=CONFIG_SYS_MECR_VAL - str r2,[r1, #MECR_OFFSET] - ldr r2,[r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2,=CONFIG_SYS_MCMEM0_VAL - str r2,[r1, #MCMEM0_OFFSET] - ldr r2,[r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2,=CONFIG_SYS_MCMEM1_VAL - str r2,[r1, #MCMEM1_OFFSET] - ldr r2,[r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2,=CONFIG_SYS_MCATT0_VAL - str r2,[r1, #MCATT0_OFFSET] - ldr r2,[r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2,=CONFIG_SYS_MCATT1_VAL - str r2,[r1, #MCATT1_OFFSET] - ldr r2,[r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2,=CONFIG_SYS_MCIO0_VAL - str r2,[r1, #MCIO0_OFFSET] - ldr r2,[r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2,=CONFIG_SYS_MCIO1_VAL - str r2,[r1, #MCIO1_OFFSET] - ldr r2,[r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - @ get the mdrefr settings - ldr r4,=CONFIG_SYS_MDREFR_VAL - - @ write back mdrefr - str r4,[r1, #MDREFR_OFFSET] - ldr r4,[r1, #MDREFR_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - /* FIXME: we use async mode for now */ - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - @ set K1RUN for bank 0 - @ - orr r4, r4, #MDREFR_K1RUN - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #MDREFR_SLFRSH - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ if E0PIN is also used: #(MDREFR_E1PIN|MDREFR_E0PIN) - orr r4, r4, #(MDREFR_E1PIN) - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop - - /* Step 4d: */ - /* fetch platform value of mdcnfg */ - @ - ldr r2, =CONFIG_SYS_MDCNFG_VAL - - @ disable all sdram banks - @ - bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) - bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) - - @ program banks 0/1 for bus width - @ - bic r2, r2, #MDCNFG_DWID0 @0=32-bit - - @ write initial value of mdcnfg, w/o enabling sdram banks - @ - str r2, [r1, #MDCNFG_OFFSET] - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - ldr r3, =CONFIG_SYS_DRAM_BASE - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* get memory controller base address */ - ldr r1, =MEMC_BASE - - @fetch current mdcnfg value - @ - ldr r3, [r1, #MDCNFG_OFFSET] - - @enable sdram bank 0 if installed (must do for any populated bank) - @ - orr r3, r3, #MDCNFG_DE0 - - @write back mdcnfg, enabling the sdram bank(s) - @ - str r3, [r1, #MDCNFG_OFFSET] - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CONFIG_SYS_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - - /* We are finished with Intel's memory controller initialisation */ - - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r1, =CONFIG_SYS_ICMR_VAL /* mask all interrupts at the controller */ - ldr r2, =ICMR - str r1, [r2] - - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - /* (hard-coding at 398.12MHz for now). */ - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - /* Note: See label 'ENABLECLKS' for the re-enabling */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - - /* default value */ - ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ - - /* ... and write the core clock config register */ - ldr r1, =CCCR - str r2, [r1] - -#ifdef RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - @ Turn on needed clocks - @ -test: - ldr r1, =CKEN - ldr r2, =CONFIG_SYS_CKEN_VAL - str r2, [r1] - - /* ---------------------------------------------------------------- */ - /* */ - /* ---------------------------------------------------------------- */ - - /* Save SDRAM size ?*/ - ldr r1, =DRAM_SIZE - str r8, [r1] - - /* FIXME */ - -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -#endif - - /* ---------------------------------------------------------------- */ - /* End lowlevel_init */ - /* ---------------------------------------------------------------- */ - -endlowlevel_init: - - mov pc, lr diff --git a/board/xaeniax/xaeniax.c b/board/xaeniax/xaeniax.c index 4c19c4dd4ef..40b0f3b30e2 100644 --- a/board/xaeniax/xaeniax.c +++ b/board/xaeniax/xaeniax.c @@ -39,8 +39,9 @@ DECLARE_GLOBAL_DATA_PTR; int board_init (void) { - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); /* arch number of xaeniax */ gd->bd->bi_arch_number = 585; @@ -58,19 +59,18 @@ int board_late_init(void) return 0; } +extern void pxa_dram_init(void); +int dram_init(void) +{ + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} -int dram_init (void) +void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - /* gd->bd->bi_dram[1].start = PHYS_SDRAM_2;*/ - /* gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;*/ - /* gd->bd->bi_dram[2].start = PHYS_SDRAM_3; */ - /* gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; */ - /* gd->bd->bi_dram[3].start = PHYS_SDRAM_4; */ - /* gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; */ - - return 0; } #ifdef CONFIG_CMD_NET diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 67d4106d6f1..18b68fafae1 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -42,6 +42,7 @@ */ #define CONFIG_PXA250 1 /* This is an PXA255 CPU */ #define CONFIG_XAENIAX 1 /* on a xaeniax board */ +#define CONFIG_SYS_TEXT_BASE 0x0 #define BOARD_LATE_INIT 1 @@ -437,8 +438,9 @@ */ #define CONFIG_SYS_PSSR_VAL 0x00000030 -#define CONFIG_SYS_CKEN_VAL 0x00000080 /* */ -#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_CKEN 0x00000080 /* */ +#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 /* @@ -562,6 +564,9 @@ */ #define CONFIG_SYS_MDMRS_VAL 0x00320032 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 + /* * PCMCIA and CF Interfaces */ From 6a880e39659ee868c93fbe68840015b45304f4fd Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 21:57:34 +0200 Subject: [PATCH 038/116] PXA: xm250: Fix for reloc Signed-off-by: Marek Vasut --- board/xm250/Makefile | 10 +- board/xm250/config.mk | 35 --- board/xm250/lowlevel_init.S | 519 ------------------------------------ board/xm250/xm250.c | 27 +- include/configs/xm250.h | 9 +- 5 files changed, 24 insertions(+), 576 deletions(-) delete mode 100644 board/xm250/config.mk delete mode 100644 board/xm250/lowlevel_init.S diff --git a/board/xm250/Makefile b/board/xm250/Makefile index a174f66199e..11e2b304c28 100644 --- a/board/xm250/Makefile +++ b/board/xm250/Makefile @@ -26,17 +26,15 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := xm250.o flash.o -SOBJS := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/xm250/config.mk b/board/xm250/config.mk deleted file mode 100644 index a3fa0e5b91f..00000000000 --- a/board/xm250/config.mk +++ /dev/null @@ -1,35 +0,0 @@ -# -# (C) Copyright 2003-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# MicroSys XM250 board: -# - - -# This is the address where U-Boot lives in flash: -#CONFIG_SYS_TEXT_BASE = 0 - -# FIXME: armboot does only work correctly when being compiled -# for the addresses _after_ relocation to RAM!! Otherwhise the -# .bss segment is assumed in flash... -CONFIG_SYS_TEXT_BASE = 0xA3F80000 diff --git a/board/xm250/lowlevel_init.S b/board/xm250/lowlevel_init.S deleted file mode 100644 index 8230550c688..00000000000 --- a/board/xm250/lowlevel_init.S +++ /dev/null @@ -1,519 +0,0 @@ -/* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm -/* - .macro SET_LED val - ldr r6, =CRADLE_LED_CLR_REG - ldr r7, =0 - str r7, [r6] - ldr r6, =CRADLE_LED_SET_REG - ldr r7, =\val - str r7, [r6] - .endm -*/ - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - - /* Set up GPIO pins first */ - - ldr r0, =GPSR0 - ldr r1, =CONFIG_SYS_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CONFIG_SYS_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CONFIG_SYS_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CONFIG_SYS_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CONFIG_SYS_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CONFIG_SYS_GPCR2_VAL - str r1, [r0] - - ldr r0, =GRER0 - ldr r1, =CONFIG_SYS_GRER0_VAL - str r1, [r0] - - ldr r0, =GRER1 - ldr r1, =CONFIG_SYS_GRER1_VAL - str r1, [r0] - - ldr r0, =GRER2 - ldr r1, =CONFIG_SYS_GRER2_VAL - str r1, [r0] - - ldr r0, =GFER0 - ldr r1, =CONFIG_SYS_GFER0_VAL - str r1, [r0] - - ldr r0, =GFER1 - ldr r1, =CONFIG_SYS_GFER1_VAL - str r1, [r0] - - ldr r0, =GFER2 - ldr r1, =CONFIG_SYS_GFER2_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CONFIG_SYS_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CONFIG_SYS_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CONFIG_SYS_GPDR2_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CONFIG_SYS_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CONFIG_SYS_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CONFIG_SYS_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CONFIG_SYS_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CONFIG_SYS_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CONFIG_SYS_GAFR2_U_VAL - str r1, [r0] - - /* enable GPIO pins */ - ldr r0, =PSSR - ldr r1, =CONFIG_SYS_PSSR_VAL - str r1, [r0] - - /* SET_LED 1 */ - - ldr r3, =MSC1 /* low - bank 2 Lubbock Registers / SRAM */ - ldr r2, =CONFIG_SYS_MSC1_VAL /* high - bank 3 Ethernet Controller */ - str r2, [r3] /* need to set MSC1 before trying to write to the HEX LEDs */ - ldr r2, [r3] /* need to read it back to make sure the value latches (see MSC section of manual) */ - - -/********************************************************************* - * Initlialize Memory Controller - * - * See PXA250 Operating System Developer's Guide - * - * pause for 200 uSecs- allow internal clocks to settle - * *Note: only need this if hard reset... doing it anyway for now - */ - - @ Step 1 - @ ---- Wait 200 usec - ldr r3, =OSCR @ reset the OS Timer Count to zero - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - /* SET_LED 2 */ - -mem_init: - @ get memory controller base address - ldr r1, =MEMC_BASE - - -@**************************************************************************** -@ Step 2 -@ - - @ Step 2a - @ write msc0, read back to ensure data latches - @ - ldr r2, =CONFIG_SYS_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] - - @ write msc1 - ldr r2, =CONFIG_SYS_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - @ write msc2 - ldr r2, =CONFIG_SYS_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - @ Step 2b - @ write mecr - ldr r2, =CONFIG_SYS_MECR_VAL - str r2, [r1, #MECR_OFFSET] - - @ write mcmem0 - ldr r2, =CONFIG_SYS_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - - @ write mcmem1 - ldr r2, =CONFIG_SYS_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - - @ write mcatt0 - ldr r2, =CONFIG_SYS_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - - @ write mcatt1 - ldr r2, =CONFIG_SYS_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - - @ write mcio0 - ldr r2, =CONFIG_SYS_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - - @ write mcio1 - ldr r2, =CONFIG_SYS_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - - /*SET_LED 3 */ - - @ Step 2c - @ fly-by-dma is defeatured on this part - @ write flycnfg - @ldr r2, =CONFIG_SYS_FLYCNFG_VAL - @str r2, [r1, #FLYCNFG_OFFSET] - -/* FIXME Does this sequence really make sense */ -#ifdef REDBOOT_WAY - @ Step 2d - @ get the mdrefr settings - ldr r3, =CONFIG_SYS_MDREFR_VAL - - @ extract DRI field (we need a valid DRI field) - @ - ldr r2, =0xFFF - - @ valid DRI field in r3 - @ - and r3, r3, r2 - - @ get the reset state of MDREFR - @ - ldr r4, [r1, #MDREFR_OFFSET] - - @ clear the DRI field - @ - bic r4, r4, r2 - - @ insert the valid DRI field loaded above - @ - orr r4, r4, r3 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ *Note: preserve the mdrefr value in r4 * - - /*SET_LED 4 */ - -@**************************************************************************** -@ Step 3 -@ -@ NO SRAM - - mov pc, r10 - - -@**************************************************************************** -@ Step 4 -@ - - @ Assumes previous mdrefr value in r4, if not then read current mdrefr - - @ clear the free-running clock bits - @ (clear K0Free, K1Free, K2Free - @ - bic r4, r4, #(0x00800000 | 0x01000000 | 0x02000000) - - @ set K0RUN for CPLD clock - @ - orr r4, r4, #0x00002000 - - @ set K1RUN if bank 0 installed - @ - orr r4, r4, #0x00010000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #0x00400000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ - orr r4, r4, #0x00008000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop -#else - @ Step 2d - @ get the mdrefr settings - ldr r4, =CONFIG_SYS_MDREFR_VAL - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ Step 4 - - @ set K0RUN for FLASH clock - @ - orr r4, r4, #0x00002000 - - @ set K1RUN for bank DRAM 0 - @ - orr r4, r4, #0x00010000 - - @ set K2RUN for bank PLD - @ - orr r4, r4, #0x00040000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - @ deassert SLFRSH - @ - bic r4, r4, #0x00400000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - - @ assert E1PIN - @ - orr r4, r4, #0x00008000 - - @ write back mdrefr - @ - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - nop - nop -#endif - - @ Step 4d - @ fetch platform value of mdcnfg - @ - ldr r2, =CONFIG_SYS_MDCNFG_VAL - - @ disable all sdram banks - @ - bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) - bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) - - @ program banks 0/1 for bus width - @ - bic r2, r2, #MDCNFG_DWID0 @0=32-bit - - @ write initial value of mdcnfg, w/o enabling sdram banks - @ - str r2, [r1, #MDCNFG_OFFSET] - - @ Step 4e - @ pause for 200 uSecs - @ - ldr r3, =OSCR @ reset the OS Timer Count to zero - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 @ really 0x2E1 is about 200usec, so 0x300 should be plenty -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - /*SET_LED 5 */ - - /* Why is this here??? */ - mov r0, #0x78 @turn everything off - mcr p15, 0, r0, c1, c0, 0 @(caches off, MMU off, etc.) - - @ Step 4f - @ Access memory *not yet enabled* for CBR refresh cycles (8) - @ - CBR is generated for all banks - - ldr r2, =CONFIG_SYS_DRAM_BASE - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - - @ Step 4g - @get memory controller base address - @ - ldr r1, =MEMC_BASE - - @fetch current mdcnfg value - @ - ldr r3, [r1, #MDCNFG_OFFSET] - - @enable sdram bank 0 if installed (must do for any populated bank) - @ - orr r3, r3, #MDCNFG_DE0 - - @write back mdcnfg, enabling the sdram bank(s) - @ - str r3, [r1, #MDCNFG_OFFSET] - - @ Step 4h - @ write mdmrs - @ - ldr r2, =CONFIG_SYS_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - @ Done Memory Init - - /*SET_LED 6 */ - - @******************************************************************** - @ Disable (mask) all interrupts at the interrupt controller - @ - - @ clear the interrupt level register (use IRQ, not FIQ) - @ - mov r1, #0 - ldr r2, =ICLR - str r1, [r2] - - @ Set interrupt mask register - @ - ldr r1, =CONFIG_SYS_ICMR_VAL - ldr r2, =ICMR - str r1, [r2] - - @ ******************************************************************** - @ Disable the peripheral clocks, and set the core clock - @ - - @ Turn Off ALL on-chip peripheral clocks for re-configuration - @ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - - @ set core clocks - @ - ldr r2, =CONFIG_SYS_CCCR_VAL - ldr r1, =CCCR - str r2, [r1] - -#ifdef ENABLE32KHZ - @ enable the 32Khz oscillator for RTC and PowerManager - @ - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - @ NOTE: spin here until OSCC.OOK get set, - @ meaning the PLL has settled. - @ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - - @ Turn on needed clocks - @ - ldr r1, =CKEN - ldr r2, =CONFIG_SYS_CKEN_VAL - str r2, [r1] - - /*SET_LED 7 */ - -/* Is this needed???? */ -#define NODEBUG -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -#endif - - /*SET_LED 8 */ - - mov pc, r10 - -@ End lowlevel_init diff --git a/board/xm250/xm250.c b/board/xm250/xm250.c index 246bdde7502..3188cf2fabb 100644 --- a/board/xm250/xm250.c +++ b/board/xm250/xm250.c @@ -56,6 +56,10 @@ int board_init (void) /**********************************************************/ { + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); + /* arch number of MicroSys XM250 */ gd->bd->bi_arch_number = MACH_TYPE_XM250; @@ -65,21 +69,18 @@ board_init (void) return 0; } -int -/**********************************************************/ -dram_init (void) -/**********************************************************/ +extern void pxa_dram_init(void); +int dram_init(void) +{ + pxa_dram_init(); + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} + +void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; - gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; - - return (0); + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; } #ifdef CONFIG_CMD_NET diff --git a/include/configs/xm250.h b/include/configs/xm250.h index 2ff9a2813ad..ea52454aa60 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -35,6 +35,7 @@ #define CONFIG_PXA250 1 /* This is an PXA250 CPU */ #define CONFIG_XM250 1 /* on a MicroSys XM250 Board */ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +#define CONFIG_SYS_TEXT_BASE 0x0 /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_NO_DCACHE @@ -322,9 +323,9 @@ * Clocks, power control and interrupts */ #define CONFIG_SYS_PSSR_VAL 0x00000030 -#define CONFIG_SYS_CCCR_VAL 0x00000161 /* 100 MHz memory, 400 MHz CPU, 400 Turbo */ -#define CONFIG_SYS_CKEN_VAL 0x000141ec /* FFUART and STUART enabled */ -#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_CCCR 0x00000161 /* 100 MHz memory, 400 MHz CPU, 400 Turbo */ +#define CONFIG_SYS_CKEN 0x000141ec /* FFUART and STUART enabled */ +#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ /* FIXME * @@ -343,6 +344,8 @@ #define CONFIG_SYS_MDCNFG_VAL 0x000009c9 #define CONFIG_SYS_MDMRS_VAL 0x00220022 #define CONFIG_SYS_MDREFR_VAL 0x000da018 /* Initial setting, individual bits set in lowlevel_init.S */ +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 /* * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init) From 06491b87de021dc0165520751ba07d3b936b28c7 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 21:30:03 +0200 Subject: [PATCH 039/116] PXA: vpac270: Add missing CONFIG_SYS_TEXT_BASE Signed-off-by: Marek Vasut --- include/configs/vpac270.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index c9d9c69cda8..3107014922d 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -27,6 +27,7 @@ */ #define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ #define CONFIG_VPAC270 1 /* Voipac PXA270 board */ +#define CONFIG_SYS_TEXT_BASE 0x0 /* * Environment settings From 9b3d167fde83375322b4b3075b9932be4772537b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 22:02:16 +0200 Subject: [PATCH 040/116] PXA: zipitz2: Add missing CONFIG_SYS_TEXT_BASE Signed-off-by: Marek Vasut --- include/configs/zipitz2.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index ce65d1f1c6e..48537e3ccb1 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -27,6 +27,7 @@ */ #define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ #define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */ +#define CONFIG_SYS_TEXT_BASE 0x0 #undef BOARD_LATE_INIT #undef CONFIG_SKIP_RELOCATE_UBOOT From 75e203584a570fcc1d119f3d6a0f3d381d3d42ca Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 20:48:43 +0200 Subject: [PATCH 041/116] PXA: Remove "delta" board Signed-off-by: Marek Vasut --- board/delta/Makefile | 52 ---- board/delta/config.mk | 1 - board/delta/delta.c | 378 ------------------------ board/delta/lowlevel_init.S | 146 ---------- board/delta/nand.c | 558 ------------------------------------ boards.cfg | 1 - include/configs/delta.h | 267 ----------------- 7 files changed, 1403 deletions(-) delete mode 100644 board/delta/Makefile delete mode 100644 board/delta/config.mk delete mode 100644 board/delta/delta.c delete mode 100644 board/delta/lowlevel_init.S delete mode 100644 board/delta/nand.c delete mode 100644 include/configs/delta.h diff --git a/board/delta/Makefile b/board/delta/Makefile deleted file mode 100644 index 648e00c3146..00000000000 --- a/board/delta/Makefile +++ /dev/null @@ -1,52 +0,0 @@ - -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := delta.o nand.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/delta/config.mk b/board/delta/config.mk deleted file mode 100644 index 8b240445699..00000000000 --- a/board/delta/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x83008000 diff --git a/board/delta/delta.c b/board/delta/delta.c deleted file mode 100644 index df23076a646..00000000000 --- a/board/delta/delta.c +++ /dev/null @@ -1,378 +0,0 @@ -/* - * (C) Copyright 2006 - * DENX Software Engineering - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -static void init_DA9030(void); -static void keys_init(void); -static void get_pressed_keys(uchar *s); -static uchar *key_match(uchar *kbd_data); - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* arch number of Lubbock-Board mk@tbd: fix this! */ - gd->bd->bi_arch_number = MACH_TYPE_LUBBOCK; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - return 0; -} - -int board_late_init(void) -{ -#ifdef DELTA_CHECK_KEYBD - uchar kbd_data[KEYBD_DATALEN]; - char keybd_env[2 * KEYBD_DATALEN + 1]; - char *str; - int i; -#endif /* DELTA_CHECK_KEYBD */ - - setenv("stdout", "serial"); - setenv("stderr", "serial"); - -#ifdef DELTA_CHECK_KEYBD - keys_init(); - - memset(kbd_data, '\0', KEYBD_DATALEN); - - /* check for pressed keys and setup keybd_env */ - get_pressed_keys(kbd_data); - - for (i = 0; i < KEYBD_DATALEN; ++i) { - sprintf (keybd_env + i + i, "%02X", kbd_data[i]); - } - setenv ("keybd", keybd_env); - - str = strdup ((char *)key_match (kbd_data)); /* decode keys */ - -# ifdef CONFIG_PREBOOT /* automatically configure "preboot" command on key match */ - setenv ("preboot", str); /* set or delete definition */ -# endif /* CONFIG_PREBOOT */ - if (str != NULL) { - free (str); - } -#endif /* DELTA_CHECK_KEYBD */ - - init_DA9030(); - return 0; -} - -/* - * Magic Key Handling, mainly copied from board/lwmon/lwmon.c - */ -#ifdef DELTA_CHECK_KEYBD - -static uchar kbd_magic_prefix[] = "key_magic"; -static uchar kbd_command_prefix[] = "key_cmd"; - -/* - * Get pressed keys - * s is a buffer of size KEYBD_DATALEN-1 - */ -static void get_pressed_keys(uchar *s) -{ - unsigned long val; - val = readl(GPLR3); - - if(val & (1<<31)) - *s++ = KEYBD_KP_DKIN0; - if(val & (1<<18)) - *s++ = KEYBD_KP_DKIN1; - if(val & (1<<29)) - *s++ = KEYBD_KP_DKIN2; - if(val & (1<<22)) - *s++ = KEYBD_KP_DKIN5; -} - -static void keys_init() -{ - writel(readl(CKENB) | CKENB_7_GPIO, CKENB); - udelay(100); - - /* Configure GPIOs */ - writel(0xa840, GPIO127); /* KP_DKIN0 */ - writel(0xa840, GPIO114); /* KP_DKIN1 */ - writel(0xa840, GPIO125); /* KP_DKIN2 */ - writel(0xa840, GPIO118); /* KP_DKIN5 */ - - /* Configure GPIOs as inputs */ - writel(readl(GPDR3) & ~(1<<31 | 1<<18 | 1<<29 | 1<<22), GPDR3); - writel((1<<31 | 1<<18 | 1<<29 | 1<<22), GCDR3); - - udelay(100); -} - -static int compare_magic (uchar *kbd_data, uchar *str) -{ - /* uchar compare[KEYBD_DATALEN-1]; */ - uchar compare[KEYBD_DATALEN]; - char *nxt; - int i; - - /* Don't include modifier byte */ - /* memcpy (compare, kbd_data+1, KEYBD_DATALEN-1); */ - memcpy (compare, kbd_data, KEYBD_DATALEN); - - for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) { - uchar c; - int k; - - c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16); - - if (str == (uchar *)nxt) { /* invalid character */ - break; - } - - /* - * Check if this key matches the input. - * Set matches to zero, so they match only once - * and we can find duplicates or extra keys - */ - for (k = 0; k < sizeof(compare); ++k) { - if (compare[k] == '\0') /* only non-zero entries */ - continue; - if (c == compare[k]) { /* found matching key */ - compare[k] = '\0'; - break; - } - } - if (k == sizeof(compare)) { - return -1; /* unmatched key */ - } - } - - /* - * A full match leaves no keys in the `compare' array, - */ - for (i = 0; i < sizeof(compare); ++i) { - if (compare[i]) - { - return -1; - } - } - - return 0; -} - - -static uchar *key_match (uchar *kbd_data) -{ - char magic[sizeof (kbd_magic_prefix) + 1]; - uchar *suffix; - char *kbd_magic_keys; - - /* - * The following string defines the characters that can pe appended - * to "key_magic" to form the names of environment variables that - * hold "magic" key codes, i. e. such key codes that can cause - * pre-boot actions. If the string is empty (""), then only - * "key_magic" is checked (old behaviour); the string "125" causes - * checks for "key_magic1", "key_magic2" and "key_magic5", etc. - */ - if ((kbd_magic_keys = getenv ("magic_keys")) == NULL) - kbd_magic_keys = ""; - - /* loop over all magic keys; - * use '\0' suffix in case of empty string - */ - for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) { - sprintf (magic, "%s%c", kbd_magic_prefix, *suffix); -#if 0 - printf ("### Check magic \"%s\"\n", magic); -#endif - if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) { - char cmd_name[sizeof (kbd_command_prefix) + 1]; - char *cmd; - - sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix); - - cmd = getenv (cmd_name); -#if 0 - printf ("### Set PREBOOT to $(%s): \"%s\"\n", - cmd_name, cmd ? cmd : "<>"); -#endif - *kbd_data = *suffix; - return ((uchar *)cmd); - } - } -#if 0 - printf ("### Delete PREBOOT\n"); -#endif - *kbd_data = '\0'; - return (NULL); -} - -int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - uchar kbd_data[KEYBD_DATALEN]; - char keybd_env[2 * KEYBD_DATALEN + 1]; - int i; - - /* Read keys */ - get_pressed_keys(kbd_data); - puts ("Keys:"); - for (i = 0; i < KEYBD_DATALEN; ++i) { - sprintf (keybd_env + i + i, "%02X", kbd_data[i]); - printf (" %02x", kbd_data[i]); - } - putc ('\n'); - setenv ("keybd", keybd_env); - return 0; -} - -U_BOOT_CMD( - kbd, 1, 1, do_kbd, - "read keyboard status", - "" -); - -#endif /* DELTA_CHECK_KEYBD */ - - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; - gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; - - return 0; -} - -void i2c_init_board() -{ - writel(readl(CKENB) | (CKENB_4_I2C), CKENB); - - /* setup I2C GPIO's */ - writel(0x801, GPIO32); /* SCL = Alt. Fkt. 1 */ - writel(0x801, GPIO33); /* SDA = Alt. Fkt. 1 */ -} - -/* initialize the DA9030 Power Controller */ -static void init_DA9030() -{ - uchar addr = (uchar) DA9030_I2C_ADDR, val = 0; - - writel(readl(CKENB) | CKENB_7_GPIO, CKENB); - udelay(100); - - /* Rising Edge on EXTON to reset DA9030 */ - writel(0x8800, GPIO17); /* configure GPIO17, no pullup, -down */ - writel(readl(GPDR0) | (1<<17), GPDR0); /* GPIO17 is output */ - writel((1<<17), GSDR0); - writel((1<<17), GPCR0); /* drive GPIO17 low */ - writel((1<<17), GPSR0); /* drive GPIO17 high */ - -#if CONFIG_SYS_DA9030_EXTON_DELAY - udelay((unsigned long) CONFIG_SYS_DA9030_EXTON_DELAY); /* wait for DA9030 */ -#endif - writel((1<<17), GPCR0); /* drive GPIO17 low */ - - /* reset the watchdog and go active (0xec) */ - val = (SYS_CONTROL_A_HWRES_ENABLE | - (0x6<<4) | - SYS_CONTROL_A_WDOG_ACTION | - SYS_CONTROL_A_WATCHDOG); - if(i2c_write(addr, SYS_CONTROL_A, 1, &val, 1)) { - printf("Error accessing DA9030 via i2c.\n"); - return; - } - - val = 0x80; - if(i2c_write(addr, IRQ_MASK_B, 1, &val, 1)) { - printf("Error accessing DA9030 via i2c.\n"); - return; - } - - i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */ - i2c_reg_write(addr, LDO2_3, 0xd1); /* LDO2 =1,9V, LDO3=3,1V */ - i2c_reg_write(addr, LDO4_5, 0xcc); /* LDO2 =1,9V, LDO3=3,1V */ - i2c_reg_write(addr, LDO6_SIMCP, 0x3e); /* LDO6=3,2V, SIMCP = 5V support */ - i2c_reg_write(addr, LDO7_8, 0xc9); /* LDO7=2,7V, LDO8=3,0V */ - i2c_reg_write(addr, LDO9_12, 0xec); /* LDO9=3,0V, LDO12=3,2V */ - i2c_reg_write(addr, BUCK, 0x0c); /* Buck=1.2V */ - i2c_reg_write(addr, REG_CONTROL_2_98, 0x7f); /* All LDO'S on 8,9,10,11,12,14 */ - i2c_reg_write(addr, LDO_10_11, 0xcc); /* LDO10=3.0V LDO11=3.0V */ - i2c_reg_write(addr, LDO_15, 0xae); /* LDO15=1.8V, dislock first 3bit */ - i2c_reg_write(addr, LDO_14_16, 0x05); /* LDO14=2.8V, LDO16=NB */ - i2c_reg_write(addr, LDO_18_19, 0x9c); /* LDO18=3.0V, LDO19=2.7V */ - i2c_reg_write(addr, LDO_17_SIMCP0, 0x2c); /* LDO17=3.0V, SIMCP=3V support */ - i2c_reg_write(addr, BUCK2_DVC1, 0x9a); /* Buck2=1.5V plus Update support of 520 MHz */ - i2c_reg_write(addr, REG_CONTROL_2_18, 0x43); /* Ball on */ - i2c_reg_write(addr, MISC_CONTROLB, 0x08); /* session valid enable */ - i2c_reg_write(addr, USBPUMP, 0xc1); /* start pump, ignore HW signals */ - - val = i2c_reg_read(addr, STATUS); - if(val & STATUS_CHDET) - printf("Charger detected, turning on LED.\n"); - else { - printf("No charger detetected.\n"); - /* undervoltage? print error and power down */ - } -} - - -#if 0 -/* reset the DA9030 watchdog */ -void hw_watchdog_reset(void) -{ - uchar addr = (uchar) DA9030_I2C_ADDR, val = 0; - val = i2c_reg_read(addr, SYS_CONTROL_A); - val |= SYS_CONTROL_A_WATCHDOG; - i2c_reg_write(addr, SYS_CONTROL_A, val); -} -#endif - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/board/delta/lowlevel_init.S b/board/delta/lowlevel_init.S deleted file mode 100644 index 1664f3ba17c..00000000000 --- a/board/delta/lowlevel_init.S +++ /dev/null @@ -1,146 +0,0 @@ -/* - * (C) Copyright 2006 DENX Software Engineering - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE - -.macro wait time - ldr r2, =OSCR - mov r3, #0 - str r3, [r2] -0: - ldr r3, [r2] - cmp r3, \time - bls 0b -.endm - -.globl lowlevel_init -lowlevel_init: - /* Set up GPIO pins first */ - mov r10, lr - - /* Configure GPIO Pins 97, 98 UART1 / altern. Fkt. 1 */ - ldr r0, =GPIO97 - ldr r1, =0x801 - str r1, [r0] - - ldr r0, =GPIO98 - ldr r1, =0x801 - str r1, [r0] - - /* tebrandt - ASCR, clear the RDH bit */ - ldr r0, =ASCR - ldr r1, [r0] - bic r1, r1, #0x80000000 - str r1, [r0] - -mem_init: - /* Configure ACCR Register - enable DMEMC Clock at 260 / 2 MHz */ - ldr r0, =ACCR - ldr r1, [r0] - orr r1, r1, #0x3000 - str r1, [r0] - ldr r1, [r0] - - /* 2. Programm MDCNFG, leaving DMCEN de-asserted */ - ldr r0, =MDCNFG - ldr r1, =(MDCNFG_DMAP | MDCNFG_DTYPE | MDCNFG_DTC_2 | MDCNFG_DCSE0 | MDCNFG_DRAC_13) - /* ldr r1, =0x80000403 */ - str r1, [r0] - ldr r1, [r0] /* delay until written */ - - /* 3. wait nop power up waiting period (200ms) - * optimization: Steps 4+6 can be done during this - */ - wait #0x300 - - /* 4. Perform an initial Rcomp-calibration cycle */ - ldr r0, =RCOMP - ldr r1, =0x80000000 - str r1, [r0] - ldr r1, [r0] /* delay until written */ - /* missing: program for automatic rcomp evaluation cycles */ - - /* 5. DDR DRAM strobe delay calibration */ - ldr r0, =DDR_HCAL - ldr r1, =0x88000007 - str r1, [r0] - wait #5 - ldr r1, [r0] /* delay until written */ - - /* Set MDMRS */ - ldr r0, =MDMRS - ldr r1, =0x60000033 - str r1, [r0] - wait #300 - - /* Configure MDREFR */ - ldr r0, =MDREFR - ldr r1, =0x00000006 - str r1, [r0] - ldr r1, [r0] - - /* Enable the dynamic memory controller */ - ldr r0, =MDCNFG - ldr r1, [r0] - orr r1, r1, #MDCNFG_DMCEN - str r1, [r0] - -#ifndef CONFIG_SYS_SKIP_DRAM_SCRUB - /* scrub/init SDRAM if enabled/present */ - ldr r8, =CONFIG_SYS_DRAM_BASE /* base address of SDRAM (CONFIG_SYS_DRAM_BASE) */ - ldr r9, =CONFIG_SYS_DRAM_SIZE /* size of memory to scrub (CONFIG_SYS_DRAM_SIZE) */ - mov r0, #0 /* scrub with 0x0000:0000 */ - mov r1, #0 - mov r2, #0 - mov r3, #0 - mov r4, #0 - mov r5, #0 - mov r6, #0 - mov r7, #0 -10: /* fastScrubLoop */ - subs r9, r9, #32 /* 8 words/line */ - stmia r8!, {r0-r7} - beq 15f - b 10b -#endif /* CONFIG_SYS_SKIP_DRAM_SCRUB */ - -15: - /* Mask all interrupts */ - mov r1, #0 - mcr p6, 0, r1, c1, c0, 0 @ ICMR - - /* Disable software and data breakpoints */ - mov r0, #0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /* Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ - -endlowlevel_init: - mov pc, lr diff --git a/board/delta/nand.c b/board/delta/nand.c deleted file mode 100644 index 119a587a8d2..00000000000 --- a/board/delta/nand.c +++ /dev/null @@ -1,558 +0,0 @@ -/* - * (C) Copyright 2006 DENX Software Engineering - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#if defined(CONFIG_CMD_NAND) - -#include -#include -#include - -#ifdef CONFIG_SYS_DFC_DEBUG1 -# define DFC_DEBUG1(fmt, args...) printf(fmt, ##args) -#else -# define DFC_DEBUG1(fmt, args...) -#endif - -#ifdef CONFIG_SYS_DFC_DEBUG2 -# define DFC_DEBUG2(fmt, args...) printf(fmt, ##args) -#else -# define DFC_DEBUG2(fmt, args...) -#endif - -#ifdef CONFIG_SYS_DFC_DEBUG3 -# define DFC_DEBUG3(fmt, args...) printf(fmt, ##args) -#else -# define DFC_DEBUG3(fmt, args...) -#endif - -/* These really don't belong here, as they are specific to the NAND Model */ -static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; - -static struct nand_bbt_descr delta_bbt_descr = { - .options = 0, - .offs = 0, - .len = 2, - .pattern = scan_ff_pattern -}; - -static struct nand_ecclayout delta_oob = { - .eccbytes = 6, - .eccpos = {2, 3, 4, 5, 6, 7}, - .oobfree = { {8, 2}, {12, 4} } -}; - -/* - * not required for Monahans DFC - */ -static void dfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - return; -} - -#if 0 -/* read device ready pin */ -static int dfc_device_ready(struct mtd_info *mtdinfo) -{ - if(NDSR & NDSR_RDY) - return 1; - else - return 0; - return 0; -} -#endif - -/* - * Write buf to the DFC Controller Data Buffer - */ -static void dfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - unsigned long bytes_multi = len & 0xfffffffc; - unsigned long rest = len & 0x3; - unsigned long *long_buf; - int i; - - DFC_DEBUG2("dfc_write_buf: writing %d bytes starting with 0x%x.\n", len, *((unsigned long*) buf)); - if(bytes_multi) { - for(i=0; i>j) & 0xff); - } - - return; -} - -/* - * read a word. Not implemented as not used in NAND code. - */ -static u16 dfc_read_word(struct mtd_info *mtd) -{ - printf("dfc_read_word: UNIMPLEMENTED.\n"); - return 0; -} - -/* global var, too bad: mk@tbd: move to ->priv pointer */ -static unsigned long read_buf = 0; -static int bytes_read = -1; - -/* - * read a byte from NDDB Because we can only read 4 bytes from NDDB at - * a time, we buffer the remaining bytes. The buffer is reset when a - * new command is sent to the chip. - * - * WARNING: - * This function is currently only used to read status and id - * bytes. For these commands always 8 bytes need to be read from - * NDDB. So we read and discard these bytes right now. In case this - * function is used for anything else in the future, we must check - * what was the last command issued and read the appropriate amount of - * bytes respectively. - */ -static u_char dfc_read_byte(struct mtd_info *mtd) -{ - unsigned char byte; - unsigned long dummy; - - if(bytes_read < 0) { - read_buf = readl(NDDB); - dummy = readl(NDDB); - bytes_read = 0; - } - byte = (unsigned char) (read_buf>>(8 * bytes_read++)); - if(bytes_read >= 4) - bytes_read = -1; - - DFC_DEBUG2("dfc_read_byte: byte %u: 0x%x of (0x%x).\n", bytes_read - 1, byte, read_buf); - return byte; -} - -/* calculate delta between OSCR values start and now */ -static unsigned long get_delta(unsigned long start) -{ - unsigned long cur = readl(OSCR); - - if(cur < start) /* OSCR overflowed */ - return (cur + (start^0xffffffff)); - else - return (cur - start); -} - -/* delay function, this doesn't belong here */ -static void wait_us(unsigned long us) -{ - unsigned long start = readl(OSCR); - us = DIV_ROUND_UP(us * OSCR_CLK_FREQ, 1000); - - while (get_delta(start) < us) { - /* do nothing */ - } -} - -static void dfc_clear_nddb(void) -{ - writel(readl(NDCR) & ~NDCR_ND_RUN, NDCR); - wait_us(CONFIG_SYS_NAND_OTHER_TO); -} - -/* wait_event with timeout */ -static unsigned long dfc_wait_event(unsigned long event) -{ - unsigned long ndsr, timeout, start = readl(OSCR); - - if(!event) - return 0xff000000; - else if(event & (NDSR_CS0_CMDD | NDSR_CS0_BBD)) - timeout = DIV_ROUND_UP(CONFIG_SYS_NAND_PROG_ERASE_TO - * OSCR_CLK_FREQ, 1000); - else - timeout = DIV_ROUND_UP(CONFIG_SYS_NAND_OTHER_TO - * OSCR_CLK_FREQ, 1000); - - while(1) { - ndsr = readl(NDSR); - if(ndsr & event) { - writel(readl(NDSR) | event, NDSR); - break; - } - if(get_delta(start) > timeout) { - DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%lx.\n", event); - return 0xff000000; - } - - } - return ndsr; -} - -/* we don't always wan't to do this */ -static void dfc_new_cmd(void) -{ - int retry = 0; - unsigned long status; - - while(retry++ <= CONFIG_SYS_NAND_SENDCMD_RETRY) { - /* Clear NDSR */ - writel(0xfff, NDSR); - - /* set NDCR[NDRUN] */ - if (!(readl(NDCR) & NDCR_ND_RUN)) - writel(readl(NDCR) | NDCR_ND_RUN, NDCR); - - status = dfc_wait_event(NDSR_WRCMDREQ); - - if(status & NDSR_WRCMDREQ) - return; - - DFC_DEBUG2("dfc_new_cmd: FAILED to get WRITECMDREQ, retry: %d.\n", retry); - dfc_clear_nddb(); - } - DFC_DEBUG1("dfc_new_cmd: giving up after %d retries.\n", retry); -} - -/* this function is called after Programm and Erase Operations to - * check for success or failure */ -static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this) -{ - unsigned long ndsr=0, event=0; - int state = this->state; - - if(state == FL_WRITING) { - event = NDSR_CS0_CMDD | NDSR_CS0_BBD; - } else if(state == FL_ERASING) { - event = NDSR_CS0_CMDD | NDSR_CS0_BBD; - } - - ndsr = dfc_wait_event(event); - - if((ndsr & NDSR_CS0_BBD) || (ndsr & 0xff000000)) - return(0x1); /* Status Read error */ - return 0; -} - -/* cmdfunc send commands to the DFC */ -static void dfc_cmdfunc(struct mtd_info *mtd, unsigned command, - int column, int page_addr) -{ - /* register struct nand_chip *this = mtd->priv; */ - unsigned long ndcb0=0, ndcb1=0, ndcb2=0, event=0; - - /* clear the ugly byte read buffer */ - bytes_read = -1; - read_buf = 0; - - switch (command) { - case NAND_CMD_READ0: - DFC_DEBUG3("dfc_cmdfunc: NAND_CMD_READ0, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1)); - dfc_new_cmd(); - ndcb0 = (NAND_CMD_READ0 | (4<<16)); - column >>= 1; /* adjust for 16 bit bus */ - ndcb1 = (((column>>1) & 0xff) | - ((page_addr<<8) & 0xff00) | - ((page_addr<<8) & 0xff0000) | - ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */ - event = NDSR_RDDREQ; - goto write_cmd; - case NAND_CMD_READ1: - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READ1 unimplemented!\n"); - goto end; - case NAND_CMD_READOOB: - DFC_DEBUG1("dfc_cmdfunc: NAND_CMD_READOOB unimplemented!\n"); - goto end; - case NAND_CMD_READID: - dfc_new_cmd(); - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READID.\n"); - ndcb0 = (NAND_CMD_READID | (3 << 21) | (1 << 16)); /* addr cycles*/ - event = NDSR_RDDREQ; - goto write_cmd; - case NAND_CMD_PAGEPROG: - /* sent as a multicommand in NAND_CMD_SEQIN */ - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_PAGEPROG empty due to multicmd.\n"); - goto end; - case NAND_CMD_ERASE1: - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE1, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1)); - dfc_new_cmd(); - ndcb0 = (0xd060 | (1<<25) | (2<<21) | (1<<19) | (3<<16)); - ndcb1 = (page_addr & 0x00ffffff); - goto write_cmd; - case NAND_CMD_ERASE2: - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE2 empty due to multicmd.\n"); - goto end; - case NAND_CMD_SEQIN: - /* send PAGE_PROG command(0x1080) */ - dfc_new_cmd(); - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1)); - ndcb0 = (0x1080 | (1<<25) | (1<<21) | (1<<19) | (4<<16)); - column >>= 1; /* adjust for 16 bit bus */ - ndcb1 = (((column>>1) & 0xff) | - ((page_addr<<8) & 0xff00) | - ((page_addr<<8) & 0xff0000) | - ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */ - event = NDSR_WRDREQ; - goto write_cmd; - case NAND_CMD_STATUS: - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_STATUS.\n"); - dfc_new_cmd(); - ndcb0 = NAND_CMD_STATUS | (4<<21); - event = NDSR_RDDREQ; - goto write_cmd; - case NAND_CMD_RESET: - DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_RESET.\n"); - ndcb0 = NAND_CMD_RESET | (5<<21); - event = NDSR_CS0_CMDD; - goto write_cmd; - default: - printk("dfc_cmdfunc: error, unsupported command.\n"); - goto end; - } - - write_cmd: - writel(ndcb0, NDCB0); - writel(ndcb1, NDCB0); - writel(ndcb2, NDCB0); - - /* wait_event: */ - dfc_wait_event(event); - end: - return; -} - -static void dfc_gpio_init(void) -{ - DFC_DEBUG2("Setting up DFC GPIO's.\n"); - - /* no idea what is done here, see zylonite.c */ - writel(0x1, GPIO4); - - writel(0x00000001, DF_ALE_nWE1); - writel(0x00000001, DF_ALE_nWE2); - writel(0x00000001, DF_nCS0); - writel(0x00000001, DF_nCS1); - writel(0x00000001, DF_nWE); - writel(0x00000001, DF_nRE); - writel(0x00000001, DF_IO0); - writel(0x00000001, DF_IO8); - writel(0x00000001, DF_IO1); - writel(0x00000001, DF_IO9); - writel(0x00000001, DF_IO2); - writel(0x00000001, DF_IO10); - writel(0x00000001, DF_IO3); - writel(0x00000001, DF_IO11); - writel(0x00000001, DF_IO4); - writel(0x00000001, DF_IO12); - writel(0x00000001, DF_IO5); - writel(0x00000001, DF_IO13); - writel(0x00000001, DF_IO6); - writel(0x00000001, DF_IO14); - writel(0x00000001, DF_IO7); - writel(0x00000001, DF_IO15); - - writel(0x1901, DF_nWE); - writel(0x1901, DF_nRE); - writel(0x1900, DF_CLE_nOE); - writel(0x1901, DF_ALE_nWE1); - writel(0x1900, DF_INT_RnB); -} - -/* - * Board-specific NAND initialization. The following members of the - * argument are board-specific (per include/linux/mtd/nand_new.h): - * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device - * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device - * - hwcontrol: hardwarespecific function for accesing control-lines - * - dev_ready: hardwarespecific function for accesing device ready/busy line - * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must - * only be provided if a hardware ECC is available - * - ecc.mode: mode of ecc, see defines - * - chip_delay: chip dependent delay for transfering data from array to - * read regs (tR) - * - options: various chip options. They can partly be set to inform - * nand_scan about special functionality. See the defines for further - * explanation - * Members with a "?" were not set in the merged testing-NAND branch, - * so they are not set here either. - */ -int board_nand_init(struct nand_chip *nand) -{ - unsigned long tCH, tCS, tWH, tWP, tRH, tRP, tRP_high, tR, tWHR, tAR; - - /* set up GPIO Control Registers */ - dfc_gpio_init(); - - /* turn on the NAND Controller Clock (104 MHz @ D0) */ - writel(readl(CKENA) | (CKENA_4_NAND | CKENA_9_SMC), CKENA); - -#undef CONFIG_SYS_TIMING_TIGHT -#ifndef CONFIG_SYS_TIMING_TIGHT - tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1), - DFC_MAX_tCH); - tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US) + 1), - DFC_MAX_tCS); - tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US) + 1), - DFC_MAX_tWH); - tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US) + 1), - DFC_MAX_tWP); - tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US) + 1), - DFC_MAX_tRH); - tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US) + 1), - DFC_MAX_tRP); - tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) + 1), - DFC_MAX_tR); - tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) + 1), - DFC_MAX_tWHR); - tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) + 1), - DFC_MAX_tAR); -#else /* this is the tight timing */ - - tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US)), - DFC_MAX_tCH); - tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US)), - DFC_MAX_tCS); - tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US)), - DFC_MAX_tWH); - tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US)), - DFC_MAX_tWP); - tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US)), - DFC_MAX_tRH); - tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US)), - DFC_MAX_tRP); - tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) - tCH - 2), - DFC_MAX_tR); - tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) - tCH - 2), - DFC_MAX_tWHR); - tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) - 2), - DFC_MAX_tAR); -#endif /* CONFIG_SYS_TIMING_TIGHT */ - - - DFC_DEBUG2("tCH=%u, tCS=%u, tWH=%u, tWP=%u, tRH=%u, tRP=%u, tR=%u, tWHR=%u, tAR=%u.\n", tCH, tCS, tWH, tWP, tRH, tRP, tR, tWHR, tAR); - - /* tRP value is split in the register */ - if(tRP & (1 << 4)) { - tRP_high = 1; - tRP &= ~(1 << 4); - } else { - tRP_high = 0; - } - - writel((tCH << 19) | - (tCS << 16) | - (tWH << 11) | - (tWP << 8) | - (tRP_high << 6) | - (tRH << 3) | - (tRP << 0), - NDTR0CS0); - - writel((tR << 16) | - (tWHR << 4) | - (tAR << 0), - NDTR1CS0); - - /* If it doesn't work (unlikely) think about: - * - ecc enable - * - chip select don't care - * - read id byte count - * - * Intentionally enabled by not setting bits: - * - dma (DMA_EN) - * - page size = 512 - * - cs don't care, see if we can enable later! - * - row address start position (after second cycle) - * - pages per block = 32 - * - ND_RDY : clears command buffer - */ - /* NDCR_NCSX | /\* Chip select busy don't care *\/ */ - - writel(NDCR_SPARE_EN | /* use the spare area */ - NDCR_DWIDTH_C | /* 16bit DFC data bus width */ - NDCR_DWIDTH_M | /* 16 bit Flash device data bus width */ - (2 << 16) | /* read id count = 7 ???? mk@tbd */ - NDCR_ND_ARB_EN | /* enable bus arbiter */ - NDCR_RDYM | /* flash device ready ir masked */ - NDCR_CS0_PAGEDM | /* ND_nCSx page done ir masked */ - NDCR_CS1_PAGEDM | - NDCR_CS0_CMDDM | /* ND_CSx command done ir masked */ - NDCR_CS1_CMDDM | - NDCR_CS0_BBDM | /* ND_CSx bad block detect ir masked */ - NDCR_CS1_BBDM | - NDCR_DBERRM | /* double bit error ir masked */ - NDCR_SBERRM | /* single bit error ir masked */ - NDCR_WRDREQM | /* write data request ir masked */ - NDCR_RDDREQM | /* read data request ir masked */ - NDCR_WRCMDREQM, /* write command request ir masked */ - NDCR); - - - /* wait 10 us due to cmd buffer clear reset */ - /* wait(10); */ - - - nand->cmd_ctrl = dfc_hwcontrol; -/* nand->dev_ready = dfc_device_ready; */ - nand->ecc.mode = NAND_ECC_SOFT; - nand->ecc.layout = &delta_oob; - nand->options = NAND_BUSWIDTH_16; - nand->waitfunc = dfc_wait; - nand->read_byte = dfc_read_byte; - nand->read_word = dfc_read_word; - nand->read_buf = dfc_read_buf; - nand->write_buf = dfc_write_buf; - - nand->cmdfunc = dfc_cmdfunc; - nand->badblock_pattern = &delta_bbt_descr; - return 0; -} - -#endif diff --git a/boards.cfg b/boards.cfg index 0f3292fd390..31c4bf05ded 100644 --- a/boards.cfg +++ b/boards.cfg @@ -65,7 +65,6 @@ balloon3 arm pxa cerf250 arm pxa cradle arm pxa csb226 arm pxa -delta arm pxa innokom arm pxa lubbock arm pxa palmld arm pxa diff --git a/include/configs/delta.h b/include/configs/delta.h deleted file mode 100644 index d53acbfebcf..00000000000 --- a/include/configs/delta.h +++ /dev/null @@ -1,267 +0,0 @@ -/* - * Configuation settings for the Delta board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_CPU_MONAHANS 1 /* Intel Monahan CPU */ -#define CONFIG_CPU_PXA320 -#define CONFIG_DELTA 1 /* Delta board */ - -/* #define CONFIG_LCD 1 */ -#ifdef CONFIG_LCD -#define CONFIG_SHARP_LM8V31 -#endif -#define BOARD_LATE_INIT 1 - -#undef CONFIG_SKIP_RELOCATE_UBOOT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_NO_DCACHE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -/* - * Hardware drivers - */ -#undef TURN_ON_ETHERNET -#ifdef TURN_ON_ETHERNET -# define CONFIG_DRIVER_SMC91111 1 -# define CONFIG_SMC91111_BASE 0x14000300 -# define CONFIG_SMC91111_EXT_PHY -# define CONFIG_SMC_USE_32_BIT -# undef CONFIG_SMC_USE_IOFUNCS /* just for use with the kernel */ -#endif - -#define CONFIG_HARD_I2C 1 /* required for DA9030 access */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */ -#define CONFIG_SYS_I2C_SLAVE 1 /* I2C controllers address */ -#define DA9030_I2C_ADDR 0x49 /* I2C address of DA9030 */ -#define CONFIG_SYS_DA9030_EXTON_DELAY 100000 /* wait x us after DA9030 reset via EXTON */ -#define CONFIG_SYS_I2C_INIT_BOARD 1 -/* #define CONFIG_HW_WATCHDOG 1 /\* Required for hitting the DA9030 WD *\/ */ - -#define DELTA_CHECK_KEYBD 1 /* check for keys pressed during boot */ -#define CONFIG_PREBOOT "\0" - -#ifdef DELTA_CHECK_KEYBD -# define KEYBD_DATALEN 4 /* we have four keys */ -# define KEYBD_KP_DKIN0 0x1 /* vol+ */ -# define KEYBD_KP_DKIN1 0x2 /* vol- */ -# define KEYBD_KP_DKIN2 0x3 /* multi */ -# define KEYBD_KP_DKIN5 0x4 /* SWKEY_GN */ -#endif /* DELTA_CHECK_KEYBD */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#ifdef TURN_ON_ETHERNET - -#define CONFIG_CMD_PING - -#else - -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_NAND -#define CONFIG_CMD_I2C - -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS - -#endif - -/* USB */ -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_DOS_PARTITION 1 - -#include /* for OHCI_REGS_BASE */ - -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE OHCI_REGS_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "delta" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 - -#define CONFIG_BOOTDELAY -1 -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_IPADDR 192.168.0.21 -#define CONFIG_SERVERIP 192.168.0.250 -#define CONFIG_BOOTCOMMAND "bootm 80000" -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" -#define CONFIG_CMDLINE_TAG -#define CONFIG_TIMESTAMP - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ -#else -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0x80400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x80800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */ - -#define CONFIG_SYS_HZ 1000 - -/* Monahans Core Frequency */ -#define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO 16 /* valid values: 8, 16, 24, 31 */ -#define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 1 /* valid values: 1, 2 */ - - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#ifdef CONFIG_MMC -#define CONFIG_PXA_MMC -#define CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#endif - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x1000000 /* 64 MB */ -#define PHYS_SDRAM_2 0x81000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x1000000 /* 64 MB */ -#define PHYS_SDRAM_3 0x82000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x1000000 /* 64 MB */ -#define PHYS_SDRAM_4 0x83000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x1000000 /* 64 MB */ - -#define CONFIG_SYS_DRAM_BASE 0x80000000 /* at CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB Ram */ - -#undef CONFIG_SYS_SKIP_DRAM_SCRUB - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * NAND Flash - */ -#define CONFIG_SYS_NAND0_BASE 0x0 /* 0x43100040 */ /* 0x10000000 */ -#undef CONFIG_SYS_NAND1_BASE - -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ - -/* nand timeout values */ -#define CONFIG_SYS_NAND_PROG_ERASE_TO 3000 -#define CONFIG_SYS_NAND_OTHER_TO 100 -#define CONFIG_SYS_NAND_SENDCMD_RETRY 3 -#undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */ - -/* NAND Timing Parameters (in ns) */ -#define NAND_TIMING_tCH 10 -#define NAND_TIMING_tCS 0 -#define NAND_TIMING_tWH 20 -#define NAND_TIMING_tWP 40 - -#define NAND_TIMING_tRH 20 -#define NAND_TIMING_tRP 40 - -#define NAND_TIMING_tR 11123 -#define NAND_TIMING_tWHR 100 -#define NAND_TIMING_tAR 10 - -/* NAND debugging */ -#define CONFIG_SYS_DFC_DEBUG1 /* usefull */ -#undef CONFIG_SYS_DFC_DEBUG2 /* noisy */ -#undef CONFIG_SYS_DFC_DEBUG3 /* extremly noisy */ - -#define CONFIG_MTD_DEBUG -#define CONFIG_MTD_DEBUG_VERBOSE 1 - -#define CONFIG_SYS_NO_FLASH 1 - -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_OFFSET_REDUND 0x44000 -#define CONFIG_ENV_SIZE 0x4000 - -#endif /* __CONFIG_H */ From 736947847db840eac4ae5dea6f197c9c1c9c4115 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 21:37:14 +0200 Subject: [PATCH 042/116] PXA: Remove "wepep250" board This board is broken and impossible to repair without deep knowledge or availability of the hardware. Signed-off-by: Marek Vasut --- board/wepep250/Makefile | 51 ------ board/wepep250/config.mk | 11 -- board/wepep250/flash.c | 324 --------------------------------- board/wepep250/intel.h | 99 ---------- board/wepep250/lowlevel_init.S | 145 --------------- board/wepep250/wepep250.c | 68 ------- boards.cfg | 1 - include/configs/wepep250.h | 199 -------------------- 8 files changed, 898 deletions(-) delete mode 100644 board/wepep250/Makefile delete mode 100644 board/wepep250/config.mk delete mode 100644 board/wepep250/flash.c delete mode 100644 board/wepep250/intel.h delete mode 100644 board/wepep250/lowlevel_init.S delete mode 100644 board/wepep250/wepep250.c delete mode 100644 include/configs/wepep250.h diff --git a/board/wepep250/Makefile b/board/wepep250/Makefile deleted file mode 100644 index 0669b0ebbae..00000000000 --- a/board/wepep250/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := wepep250.o flash.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/wepep250/config.mk b/board/wepep250/config.mk deleted file mode 100644 index 60cbc2429a5..00000000000 --- a/board/wepep250/config.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -# This is config used for compilation of WEP EP250 sources -# -# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE. -# This allows for example having one copy located at the end of ram and stored -# in flash device and later on while developing use other location to test -# the code in RAM device only. -# - -CONFIG_SYS_TEXT_BASE = 0xa1fe0000 -#CONFIG_SYS_TEXT_BASE = 0xa1001000 diff --git a/board/wepep250/flash.c b/board/wepep250/flash.c deleted file mode 100644 index c6e917167cb..00000000000 --- a/board/wepep250/flash.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * Copyright (C) 2003 ETC s.r.o. - * - * This code was inspired by Marius Groeger and Kyle Harris code - * available in other board ports for U-Boot - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Written by Peter Figuli , 2003. - * - */ - -#include -#include "intel.h" - - -/* - * This code should handle CFI FLASH memory device. This code is very - * minimalistic approach without many essential error handling code as well. - * Because U-Boot actually is missing smart handling of FLASH device, - * we just set flash_id to anything else to FLASH_UNKNOW, so common code - * can call us without any restrictions. - * TODO: Add CFI Query, to be able to determine FLASH device. - * TODO: Add error handling code - * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but - * hopefully may work with other configurations. - */ - -#if ( WEP_FLASH_BUS_WIDTH == 1 ) -# define FLASH_BUS vu_char -# define FLASH_BUS_RET u_char -# if ( WEP_FLASH_INTERLEAVE == 1 ) -# define FLASH_CMD( x ) x -# else -# error "With 8bit bus only one chip is allowed" -# endif - - -#elif ( WEP_FLASH_BUS_WIDTH == 2 ) -# define FLASH_BUS vu_short -# define FLASH_BUS_RET u_short -# if ( WEP_FLASH_INTERLEAVE == 1 ) -# define FLASH_CMD( x ) x -# elif ( WEP_FLASH_INTERLEAVE == 2 ) -# define FLASH_CMD( x ) (( x << 8 )| x ) -# else -# error "With 16bit bus only 1 or 2 chip(s) are allowed" -# endif - - -#elif ( WEP_FLASH_BUS_WIDTH == 4 ) -# define FLASH_BUS vu_long -# define FLASH_BUS_RET u_long -# if ( WEP_FLASH_INTERLEAVE == 1 ) -# define FLASH_CMD( x ) x -# elif ( WEP_FLASH_INTERLEAVE == 2 ) -# define FLASH_CMD( x ) (( x << 16 )| x ) -# elif ( WEP_FLASH_INTERLEAVE == 4 ) -# define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x ) -# else -# error "With 32bit bus only 1,2 or 4 chip(s) are allowed" -# endif - -#else -# error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration" -#endif - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -static FLASH_BUS_RET flash_status_reg (void) -{ - - FLASH_BUS *addr = (FLASH_BUS *) 0; - - *addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER); - - return *addr; -} - -static int flash_ready (ulong timeout) -{ - int ok = 1; - - reset_timer_masked (); - while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) != - FLASH_CMD (CFI_INTEL_SR_READY)) { - if (get_timer_masked () > timeout && timeout != 0) { - ok = 0; - break; - } - } - return ok; -} - -#if ( CONFIG_SYS_MAX_FLASH_BANKS != 1 ) -# error "WEP platform has only one flash bank!" -#endif - - -ulong flash_init (void) -{ - int i; - FLASH_BUS address = WEP_FLASH_BASE; - - flash_info[0].size = WEP_FLASH_BANK_SIZE; - flash_info[0].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - flash_info[0].flash_id = INTEL_MANUFACT; - memset (flash_info[0].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_SECT; i++) { - flash_info[0].start[i] = address; -#ifdef WEP_FLASH_UNLOCK - /* Some devices are hw locked after start. */ - *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP); - *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK); - flash_ready (0); - *((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY); -#endif - address += WEP_FLASH_SECT_SIZE; - } - - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return WEP_FLASH_BANK_SIZE; -} - -void flash_print_info (flash_info_t * info) -{ - int i; - - printf (" Intel vendor\n"); - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) { - if (!(i % 5)) { - printf ("\n"); - } - - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); -} - - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, non_protected = 0, sector; - int rc = ERR_OK; - - FLASH_BUS *address; - - for (sector = s_first; sector <= s_last; sector++) { - if (!info->protect[sector]) { - non_protected++; - } - } - - if (!non_protected) { - return ERR_PROTECTED; - } - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - flag = disable_interrupts (); - - - /* Start erase on unprotected sectors */ - for (sector = s_first; sector <= s_last && !ctrlc (); sector++) { - if (info->protect[sector]) { - printf ("Protected sector %2d skipping...\n", sector); - continue; - } else { - printf ("Erasing sector %2d ... ", sector); - } - - address = (FLASH_BUS *) (info->start[sector]); - - *address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE); - *address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM); - if (flash_ready (CONFIG_SYS_FLASH_ERASE_TOUT)) { - *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER); - printf ("ok.\n"); - } else { - *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND); - rc = ERR_TIMOUT; - printf ("timeout! Aborting...\n"); - break; - } - *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY); - } - if (ctrlc ()) - printf ("User Interrupt!\n"); - - /* allow flash to settle - wait 10 ms */ - udelay_masked (10000); - if (flag) { - enable_interrupts (); - } - - return rc; -} - -static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data) -{ - FLASH_BUS *address = (FLASH_BUS *) dest; - int rc = ERR_OK; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*address & data) != data) { - return ERR_NOT_ERASED; - } - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - - flag = disable_interrupts (); - - *address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER); - *address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1); - *address = data; - - if (!flash_ready (CONFIG_SYS_FLASH_WRITE_TOUT)) { - *address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND); - rc = ERR_TIMOUT; - printf ("timeout! Aborting...\n"); - } - - *address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY); - if (flag) { - enable_interrupts (); - } - - return rc; -} - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong read_addr, write_addr; - FLASH_BUS data; - int i, result = ERR_OK; - - - read_addr = addr & ~(sizeof (FLASH_BUS) - 1); - write_addr = read_addr; - if (read_addr != addr) { - data = 0; - for (i = 0; i < sizeof (FLASH_BUS); i++) { - if (read_addr < addr || cnt == 0) { - data |= *((uchar *) read_addr) << i * 8; - } else { - data |= (*src++) << i * 8; - cnt--; - } - read_addr++; - } - if ((result = write_data (info, write_addr, data)) != ERR_OK) { - return result; - } - write_addr += sizeof (FLASH_BUS); - } - for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) { - if ((result = write_data (info, write_addr, - *((FLASH_BUS *) src))) != ERR_OK) { - return result; - } - write_addr += sizeof (FLASH_BUS); - src += sizeof (FLASH_BUS); - } - if (cnt > 0) { - read_addr = write_addr; - data = 0; - for (i = 0; i < sizeof (FLASH_BUS); i++) { - if (cnt > 0) { - data |= (*src++) << i * 8; - cnt--; - } else { - data |= *((uchar *) read_addr) << i * 8; - } - read_addr++; - } - if ((result = write_data (info, write_addr, data)) != 0) { - return result; - } - } - return ERR_OK; -} diff --git a/board/wepep250/intel.h b/board/wepep250/intel.h deleted file mode 100644 index 77498b6e1df..00000000000 --- a/board/wepep250/intel.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (C) 2002 ETC s.r.o. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the ETC s.r.o. nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Written by Marcel Telka , 2002. - * - * Documentation: - * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A, - * 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011 - * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18, - * 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005 - * - * This file is taken from OpenWinCE project hosted by SourceForge.net - * - */ - -#ifndef FLASH_INTEL_H -#define FLASH_INTEL_H - -#include - -/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */ - -#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */ -#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */ - -/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */ - -#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */ -#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */ - -/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */ - -#define CFI_CHIP_INTEL_28F320J3A 0x0016 -#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A" -#define CFI_CHIP_INTEL_28F640J3A 0x0017 -#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A" -#define CFI_CHIP_INTEL_28F128J3A 0x0018 -#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A" - -/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */ - -#define CFI_CHIP_INTEL_28F640K3 0x8801 -#define CFI_CHIPN_INTEL_28F640K3 "28F640K3" -#define CFI_CHIP_INTEL_28F128K3 0x8802 -#define CFI_CHIPN_INTEL_28F128K3 "28F128K3" -#define CFI_CHIP_INTEL_28F256K3 0x8803 -#define CFI_CHIPN_INTEL_28F256K3 "28F256K3" -#define CFI_CHIP_INTEL_28F640K18 0x8805 -#define CFI_CHIPN_INTEL_28F640K18 "28F640K18" -#define CFI_CHIP_INTEL_28F128K18 0x8806 -#define CFI_CHIPN_INTEL_28F128K18 "28F128K18" -#define CFI_CHIP_INTEL_28F256K18 0x8807 -#define CFI_CHIPN_INTEL_28F256K18 "28F256K18" - -#endif /* FLASH_INTEL_H */ diff --git a/board/wepep250/lowlevel_init.S b/board/wepep250/lowlevel_init.S deleted file mode 100644 index 9bb091f5094..00000000000 --- a/board/wepep250/lowlevel_init.S +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Copyright (C) 2001, 2002 ETC s.r.o. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA - * 02111-1307, USA. - * - * Written by Marcel Telka , 2001, 2002. - * Changes for U-Boot Peter Figuli , 2003. - * - * This file is taken from OpenWinCE project hosted by SourceForge.net - * - * Documentation: - * [1] Intel Corporation, "Intel PXA250 and PXA210 Application Processors - * Developer's Manual", February 2002, Order Number: 278522-001 - * [2] Samsung Electronics, "8Mx16 SDRAM 54CSP K4S281633D-RL/N/P", - * Revision 1.0, February 2002 - * [3] Samsung Electronics, "16Mx16 SDRAM 54CSP K4S561633C-RL(N)", - * Revision 1.0, February 2002 - * -*/ - -#include -#include -#include - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - -/* setup memory - see 6.12 in [1] - * Step 1 - wait 200 us - */ - mov r0,#0x2700 /* wait 200 us @ 99.5 MHz */ -1: subs r0, r0, #1 - bne 1b -/* TODO: complete step 1 for Synchronous Static memory*/ - - ldr r0, =0x48000000 /* MC_BASE */ - - -/* step 1.a - setup MSCx - */ - ldr r1, =0x000012B3 /* MSC0_RRR0(1) | MSC0_RDN0(2) | MSC0_RDF0(11) | MSC0_RT0(3) */ - str r1, [r0, #0x8] /* MSC0_OFFSET */ - -/* step 1.c - clear MDREFR:K1FREE, set MDREFR:DRI - * see AUTO REFRESH chapter in section D. in [2] and in [3] - * DRI = (64ms / 4096) * 99.53MHz / 32 = 48 for K4S281633 - * DRI = (64ms / 8192) * 99.52MHz / 32 = 24 for K4S561633 - * TODO: complete for Synchronous Static memory - */ - ldr r1, [r0, #4] /* MDREFR_OFFSET */ - ldr r2, =0x01000FFF /* MDREFR_K1FREE | MDREFR_DRI_MASK */ - bic r1, r1, r2 -#if defined( WEP_SDRAM_K4S281633 ) - orr r1, r1, #48 /* MDREFR_DRI(48) */ -#elif defined( WEP_SDRAM_K4S561633 ) - orr r1, r1, #24 /* MDREFR_DRI(24) */ -#else -#error SDRAM chip is not defined -#endif - - str r1, [r0, #4] /* MDREFR_OFFSET */ - -/* Step 2 - only for Synchronous Static memory (TODO) - * - * Step 3 - same as step 4 - * - * Step 4 - * - * Step 4.a - set MDREFR:K1RUN, clear MDREFR:K1DB2 - */ - orr r1, r1, #0x00010000 /* MDREFR_K1RUN */ - bic r1, r1, #0x00020000 /* MDREFR_K1DB2 */ - str r1, [r0, #4] /* MDREFR_OFFSET */ - -/* Step 4.b - clear MDREFR:SLFRSH */ - bic r1, r1, #0x00400000 /* MDREFR_SLFRSH */ - str r1, [r0, #4] /* MDREFR_OFFSET */ - -/* Step 4.c - set MDREFR:E1PIN */ - orr r1, r1, #0x00008000 /* MDREFR_E1PIN */ - str r1, [r0, #4] /* MDREFR_OFFSET */ - -/* Step 4.d - automatically done - * - * Steps 4.e and 4.f - configure SDRAM - */ -#if defined( WEP_SDRAM_K4S281633 ) - ldr r1, =0x00000AA8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(1) | MDCNFG_DNB0 */ -#elif defined( WEP_SDRAM_K4S561633 ) - ldr r1, =0x00000AC8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(2) | MDCNFG_DNB0 */ -#else -#error SDRAM chip is not defined -#endif - str r1, [r0, #0] /* MDCNFG_OFFSET */ - -/* Step 5 - wait at least 200 us for SDRAM - * see section B. in [2] - */ - mov r2,#0x2700 /* wait 200 us @ 99.5 MHz */ -1: subs r2, r2, #1 - bne 1b - -/* Step 6 - after reset dcache is disabled, so automatically done - * - * Step 7 - eight refresh cycles - */ - mov r2, #0xA0000000 - ldr r3, [r2] - ldr r3, [r2] - ldr r3, [r2] - ldr r3, [r2] - ldr r3, [r2] - ldr r3, [r2] - ldr r3, [r2] - ldr r3, [r2] - -/* Step 8 - we don't need dcache now - * - * Step 9 - enable SDRAM partition 0 - */ - orr r1, r1, #1 /* MDCNFG_DE0 */ - str r1, [r0, #0] /* MDCNFG_OFFSET */ - -/* Step 10 - write MDMRS */ - mov r1, #0 - str r1, [r0, #0x40] /* MDMRS_OFFSET */ - -/* Step 11 - optional (TODO) */ - - mov pc,r10 diff --git a/board/wepep250/wepep250.c b/board/wepep250/wepep250.c deleted file mode 100644 index 6e41ea6d01e..00000000000 --- a/board/wepep250/wepep250.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Copyright (C) 2003 ETC s.r.o. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Written by Peter Figuli , 2003. - * - */ - -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -int board_init (void) -{ - gd->bd->bi_arch_number = MACH_TYPE_WEP_EP250; - gd->bd->bi_boot_params = 0xa0000000; -/* - * Setup GPIO stuff to get serial working - */ -#if defined( CONFIG_FFUART ) - writel(0x80, GPDR1); - writel(0x8010, GAFR1_L); -#elif defined( CONFIG_BTUART ) - writel(0x800, GPDR1); - writel(0x900000, GAFR1_L); -#endif - writel(0x20, PSSR); - - return 0; -} - -int dram_init (void) -{ -#if ( CONFIG_NR_DRAM_BANKS > 0 ) - gd->bd->bi_dram[0].start = WEP_SDRAM_1; - gd->bd->bi_dram[0].size = WEP_SDRAM_1_SIZE; -#endif -#if ( CONFIG_NR_DRAM_BANKS > 1 ) - gd->bd->bi_dram[1].start = WEP_SDRAM_2; - gd->bd->bi_dram[1].size = WEP_SDRAM_2_SIZE; -#endif -#if ( CONFIG_NR_DRAM_BANKS > 2 ) - gd->bd->bi_dram[2].start = WEP_SDRAM_3; - gd->bd->bi_dram[2].size = WEP_SDRAM_3_SIZE; -#endif -#if ( CONFIG_NR_DRAM_BANKS > 3 ) - gd->bd->bi_dram[3].start = WEP_SDRAM_4; - gd->bd->bi_dram[3].size = WEP_SDRAM_4_SIZE; -#endif - - return 0; -} diff --git a/boards.cfg b/boards.cfg index 31c4bf05ded..62ba0897024 100644 --- a/boards.cfg +++ b/boards.cfg @@ -401,7 +401,6 @@ lpd7a400 arm lh7a40x lpd7a40x lpd7a404 arm lh7a40x lpd7a40x colibri_pxa270 arm pxa pxa255_idp arm pxa -wepep250 arm pxa xsengine arm pxa zylonite arm pxa atngw100 avr32 at32ap - atmel at32ap700x diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h deleted file mode 100644 index a961a27922c..00000000000 --- a/include/configs/wepep250.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Copyright (C) 2003 ETC s.r.o. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Written by Peter Figuli , 2003. - * - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_PXA250 1 /* this is an PXA250 CPU */ -#define CONFIG_WEPEP250 1 /* config for wepep250 board */ -#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_NO_DCACHE - -/* - * Select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_BTUART 1 /* BTUART is default on WEP dev board */ -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_SOURCE - - -/* - * Boot options. Setting delay to -1 stops autostart count down. - * NOTE: Sending parameters to kernel depends on kernel version and - * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept - * parameters at all! Do not get confused by them so. - */ -#define CONFIG_BOOTDELAY -1 -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=32m console=ttyS01,115200n8" -#define CONFIG_BOOTCOMMAND "bootm 40000" - - -/* - * General options for u-boot. Modify to save memory foot print - */ -#define CONFIG_SYS_LONGHELP /* undef saves memory */ -#define CONFIG_SYS_PROMPT "WEP> " /* prompt string */ -#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest test area */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * Definitions related to passing arguments to kernel. - */ -#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ -#undef CONFIG_INITRD_TAG /* do not send initrd params */ -#undef CONFIG_VFD /* do not send framebuffer setup */ - - -/* - * Malloc pool need to host env + 128 Kb reserve for other allocations. - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -#define CONFIG_STACKSIZE (120<<10) /* stack size */ - -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */ -#endif - -/* - * SDRAM Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ -#define WEP_SDRAM_1 0xa0000000 /* SDRAM bank #1 */ -#define WEP_SDRAM_1_SIZE 0x02000000 /* 32 MB ( 2 chip ) */ -#define WEP_SDRAM_2 0xa2000000 /* SDRAM bank #2 */ -#define WEP_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define WEP_SDRAM_3 0xa8000000 /* SDRAM bank #3 */ -#define WEP_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define WEP_SDRAM_4 0xac000000 /* SDRAM bank #4 */ -#define WEP_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x02000000 - -/* Uncomment used SDRAM chip */ -#define WEP_SDRAM_K4S281633 -/*#define WEP_SDRAM_K4S561633*/ - - -/* - * Configuration for FLASH memory - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */ -#define WEP_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */ -#define WEP_FLASH_INTERLEAVE 2 /* ... made of 2 chips */ -#define WEP_FLASH_BANK_SIZE 0x2000000 /* size of one flash bank*/ -#define WEP_FLASH_SECT_SIZE 0x0040000 /* size of erase sector */ -#define WEP_FLASH_BASE 0x0000000 /* location of flash memory */ -#define WEP_FLASH_UNLOCK 1 /* perform hw unlock first */ - - -/* This should be defined if CFI FLASH device is present. Actually benefit - is not so clear to me. In other words we can provide more informations - to user, but this expects more complex flash handling we do not provide - now.*/ -#undef CONFIG_SYS_FLASH_CFI - -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */ - -#define CONFIG_SYS_FLASH_BASE WEP_FLASH_BASE - -/* - * This is setting for JFFS2 support in u-boot. - * Right now there is no gain for user, but later on booting kernel might be - * possible. Consider using XIP kernel running from flash to save RAM - * footprint. - * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. - */ -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 5 -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -/* - * Environment setup. Definitions of monitor location and size with - * definition of environment setup ends up in 2 possibilities. - * 1. Embeded environment - in u-boot code is space for environment - * 2. Environment is read from predefined sector of flash - * Right now we support 2. possiblity, but expecting no env placed - * on mentioned address right now. This also needs to provide whole - * sector for it - for us 256Kb is really waste of memory. U-boot uses - * default env. and until kernel parameters could be sent to kernel - * env. has no sense to us. - */ - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128kb ( 1 flash sector ) */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x20000 /* absolute address for now */ -#define CONFIG_ENV_SIZE 0x2000 - -#define PHYS_SDRAM_1 WEP_SDRAM_1 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) - -#undef CONFIG_ENV_OVERWRITE /* env is not writable now */ - -/* - * Well this has to be defined, but on the other hand it is used differently - * one may expect. For instance loadb command do not cares :-) - * So advice is - do not relay on this... - */ -#define CONFIG_SYS_LOAD_ADDR 0x40000 - -#endif /* __CONFIG_H */ From 4262a7c934e7f28de66eb86cf3393ab8e07e03d5 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 20 Oct 2010 22:01:12 +0200 Subject: [PATCH 043/116] PXA: Remove "xsengine" board This board is broken and it's not possible to repair it. Signed-off-by: Marek Vasut --- board/xsengine/Makefile | 51 ---- board/xsengine/config.mk | 1 - board/xsengine/flash.c | 470 --------------------------------- board/xsengine/lowlevel_init.S | 221 ---------------- board/xsengine/xsengine.c | 75 ------ boards.cfg | 1 - include/configs/xsengine.h | 216 --------------- 7 files changed, 1035 deletions(-) delete mode 100644 board/xsengine/Makefile delete mode 100644 board/xsengine/config.mk delete mode 100644 board/xsengine/flash.c delete mode 100644 board/xsengine/lowlevel_init.S delete mode 100644 board/xsengine/xsengine.c delete mode 100644 include/configs/xsengine.h diff --git a/board/xsengine/Makefile b/board/xsengine/Makefile deleted file mode 100644 index fc239358b23..00000000000 --- a/board/xsengine/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := xsengine.o flash.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/xsengine/config.mk b/board/xsengine/config.mk deleted file mode 100644 index 821bb3b0926..00000000000 --- a/board/xsengine/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0xA3F80000 diff --git a/board/xsengine/flash.c b/board/xsengine/flash.c deleted file mode 100644 index 736905ad717..00000000000 --- a/board/xsengine/flash.c +++ /dev/null @@ -1,470 +0,0 @@ -/* - * (C) Copyright 2002 - * Robert Schwebel, Pengutronix, - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -#define SWAP(x) __swab32(x) - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Functions */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((vu_long *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - case 1: - flash_get_size ((vu_long *) PHYS_FLASH_2, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_2, &flash_info[i]); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors */ - flash_protect ( FLAG_PROTECT_SET,CONFIG_SYS_FLASH_BASE,CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,&flash_info[0] ); - flash_protect ( FLAG_PROTECT_SET,CONFIG_ENV_ADDR,CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] ); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) return; - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AMLV640U: printf ("AM29LV640ML (64Mbit, uniform sector size)\n"); - break; - case FLASH_S29GL064M: printf ("S29GL064M (64Mbit, top boot sector size)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; isector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Write auto select command: read Manufacturer ID */ - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00900090; - - value = addr[0]; - - debug ("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value); - - switch (value) { - case AMD_MANUFACT: - debug ("Manufacturer: AMD\n"); - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - debug ("Manufacturer: FUJITSU\n"); - info->flash_id = FLASH_MAN_FUJ; - break; - default: - debug ("Manufacturer: *** unknown ***\n"); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[1]; /* device ID */ - - debug ("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value); - - switch (value) { - - case AMD_ID_MIRROR: - debug ("Mirror Bit flash: addr[14] = %08lX addr[15] = %08lX\n", - addr[14], addr[15]); - switch(addr[14]) { - case AMD_ID_LV640U_2: - if (addr[15] != AMD_ID_LV640U_3) { - debug ("Chip: AMLV640U -> unknown\n"); - info->flash_id = FLASH_UNKNOWN; - } else { - debug ("Chip: AMLV640U\n"); - info->flash_id += FLASH_AMLV640U; - info->sector_count = 128; - info->size = 0x01000000; - } - break; /* => 16 MB */ - case AMD_ID_GL064MT_2: - if (addr[15] != AMD_ID_GL064MT_3) { - debug ("Chip: S29GL064M-R3 -> unknown\n"); - info->flash_id = FLASH_UNKNOWN; - } else { - debug ("Chip: S29GL064M-R3\n"); - info->flash_id += FLASH_S29GL064M; - info->sector_count = 128; - info->size = 0x01000000; - } - break; /* => 16 MB */ - default: - debug ("Chip: *** unknown ***\n"); - info->flash_id = FLASH_UNKNOWN; - break; - } - break; - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - } - - /* set up sector start address table */ - switch (value) { - case AMD_ID_MIRROR: - switch (info->flash_id & FLASH_TYPEMASK) { - /* only known types here - no default */ - case FLASH_AMLV128U: - case FLASH_AMLV640U: - case FLASH_AMLV320U: - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base; - base += 0x20000; - } - break; - case FLASH_AMLV320B: - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base; - /* - * The first 8 sectors are 8 kB, - * all the other ones are 64 kB - */ - base += (i < 8) - ? 2 * ( 8 << 10) - : 2 * (64 << 10); - } - break; - } - break; - - default: - return (0); - break; - } - -#if 0 - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[2] & 1; - } -#endif - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0x00F000F0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - debug ("flash_erase: first: %d last: %d\n", s_first, s_last); - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00800080; - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long*)(info->start[sect]); - addr[0] = 0x00300030; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long*)(info->start[l_sect]); - while ((addr[0] & 0x00800080) != 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 100000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (volatile unsigned long *)info->start[0]; - addr[0] = 0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, SWAP(data))) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, SWAP(data))) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, SWAP(data))); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long*)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00A000A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} diff --git a/board/xsengine/lowlevel_init.S b/board/xsengine/lowlevel_init.S deleted file mode 100644 index 0d94ab60a66..00000000000 --- a/board/xsengine/lowlevel_init.S +++ /dev/null @@ -1,221 +0,0 @@ -#include -#include -#include - -DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - -/* ---- GPIO INITIALISATION ---- */ -/* Set up GPIO pins first (3 groups [31:0] [63:32] [80:64]) */ - - /* General purpose set registers */ - ldr r0, =GPSR0 - ldr r1, =CONFIG_SYS_GPSR0_VAL - str r1, [r0] - ldr r0, =GPSR1 - ldr r1, =CONFIG_SYS_GPSR1_VAL - str r1, [r0] - ldr r0, =GPSR2 - ldr r1, =CONFIG_SYS_GPSR2_VAL - str r1, [r0] - - /* General purpose clear registers */ - ldr r0, =GPCR0 - ldr r1, =CONFIG_SYS_GPCR0_VAL - str r1, [r0] - ldr r0, =GPCR1 - ldr r1, =CONFIG_SYS_GPCR1_VAL - str r1, [r0] - ldr r0, =GPCR2 - ldr r1, =CONFIG_SYS_GPCR2_VAL - str r1, [r0] - - /* General rising edge registers */ - ldr r0, =GRER0 - ldr r1, =CONFIG_SYS_GRER0_VAL - str r1, [r0] - ldr r0, =GRER1 - ldr r1, =CONFIG_SYS_GRER1_VAL - str r1, [r0] - ldr r0, =GRER2 - ldr r1, =CONFIG_SYS_GRER2_VAL - str r1, [r0] - - /* General falling edge registers */ - ldr r0, =GFER0 - ldr r1, =CONFIG_SYS_GFER0_VAL - str r1, [r0] - ldr r0, =GFER1 - ldr r1, =CONFIG_SYS_GFER1_VAL - str r1, [r0] - ldr r0, =GFER2 - ldr r1, =CONFIG_SYS_GFER2_VAL - str r1, [r0] - - /* General edge detect registers */ - ldr r0, =GPDR0 - ldr r1, =CONFIG_SYS_GPDR0_VAL - str r1, [r0] - ldr r0, =GPDR1 - ldr r1, =CONFIG_SYS_GPDR1_VAL - str r1, [r0] - ldr r0, =GPDR2 - ldr r1, =CONFIG_SYS_GPDR2_VAL - str r1, [r0] - - /* General alternate function registers */ - ldr r0, =GAFR0_L /* [0:15] */ - ldr r1, =CONFIG_SYS_GAFR0_L_VAL - str r1, [r0] - ldr r0, =GAFR0_U /* [31:16] */ - ldr r1, =CONFIG_SYS_GAFR0_U_VAL - str r1, [r0] - ldr r0, =GAFR1_L /* [47:32] */ - ldr r1, =CONFIG_SYS_GAFR1_L_VAL - str r1, [r0] - ldr r0, =GAFR1_U /* [63:48] */ - ldr r1, =CONFIG_SYS_GAFR1_U_VAL - str r1, [r0] - ldr r0, =GAFR2_L /* [79:64] */ - ldr r1, =CONFIG_SYS_GAFR2_L_VAL - str r1, [r0] - ldr r0, =GAFR2_U /* [80] */ - ldr r1, =CONFIG_SYS_GAFR2_U_VAL - str r1, [r0] - - /* General purpose direction registers */ - ldr r0, =GPDR0 - ldr r1, =CONFIG_SYS_GPDR0_VAL - str r1, [r0] - ldr r0, =GPDR1 - ldr r1, =CONFIG_SYS_GPDR1_VAL - str r1, [r0] - ldr r0, =GPDR2 - ldr r1, =CONFIG_SYS_GPDR2_VAL - str r1, [r0] - - /* Power manager sleep status */ - ldr r0, =PSSR - ldr r1, =CONFIG_SYS_PSSR_VAL - str r1, [r0] - -/* ---- MEMORY INITIALISATION ---- */ -/* Initialize Memory Controller, see PXA250 Operating System Developer's Guide */ -/* pause for 200 uSecs- allow internal clocks to settle */ - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: -/* get memory controller base address */ - ldr r1, =MEMC_BASE - -/* ---- FLASH INITIALISATION ---- */ -/* Write MSC0 and read back to ensure data change is accepted by cpu */ - ldr r2, =CONFIG_SYS_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] - -/* ---- SDRAM INITIALISATION ---- */ -/* get the MDREFR settings */ - ldr r2, =CONFIG_SYS_MDREFR_VAL - str r2, [r1, #MDREFR_OFFSET] - -/* fetch platform value of MDCNFG */ - ldr r2, =CONFIG_SYS_MDCNFG_VAL - -/* disable all sdram banks */ - bic r2, r2, #(MDCNFG_DE0 | MDCNFG_DE1) - bic r2, r2, #(MDCNFG_DE2 | MDCNFG_DE3) - -/* write initial value of MDCNFG, w/o enabling sdram banks */ - str r2, [r1, #MDCNFG_OFFSET] - -/* pause for 200 uSecs */ - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* about 200 usec */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -/* Access memory *not yet enabled* for CBR refresh cycles (8) */ -/* CBR is generated for all banks */ - - ldr r2, =CONFIG_SYS_DRAM_BASE - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - str r2, [r2] - -/* get memory controller base address */ - ldr r2, =MEMC_BASE - -/* Enable SDRAM bank 0 in MDCNFG register */ - ldr r2, [r1, #MDCNFG_OFFSET] - orr r2, r2, #MDCNFG_DE0 - str r2, [r1, #MDCNFG_OFFSET] - -/* write MDMRS to trigger an MSR command to all enabled SDRAM banks */ - ldr r2, =CONFIG_SYS_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - -/* ---- INTERRUPT INITIALISATION ---- */ -/* Disable (mask) all interrupts at the interrupt controller */ -/* clear the interrupt level register (use IRQ, not FIQ) */ - mov r1, #0 - ldr r2, =ICLR - str r1, [r2] - -/* Set interrupt mask register */ - ldr r1, =CONFIG_SYS_ICMR_VAL - ldr r2, =ICMR - str r1, [r2] - -/* ---- CLOCK INITIALISATION ---- */ -/* Disable the peripheral clocks, and set the core clock */ - -/* Turn Off ALL on-chip peripheral clocks for re-configuration */ - ldr r1, =CKEN - mov r2, #0 - str r2, [r1] - -/* set core clocks */ - ldr r2, =CONFIG_SYS_CCCR_VAL - ldr r1, =CCCR - str r2, [r1] - -#ifdef ENABLE32KHZ -/* enable the 32Khz oscillator for RTC and PowerManager */ - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - -/* NOTE: spin here until OSCC.OOK get set, meaning the PLL has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#endif - -/* Turn on needed clocks */ - ldr r1, =CKEN - ldr r2, =CONFIG_SYS_CKEN_VAL - str r2, [r1] - - mov pc, r10 diff --git a/board/xsengine/xsengine.c b/board/xsengine/xsengine.c deleted file mode 100644 index 4464fd4a0a7..00000000000 --- a/board/xsengine/xsengine.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* arch number */ - gd->bd->bi_arch_number = MACH_TYPE_XSENGINE; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - return 0; -} - -int board_late_init (void) -{ - setenv ("stdout", "serial"); - setenv ("stderr", "serial"); - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/boards.cfg b/boards.cfg index 62ba0897024..c6880236ee1 100644 --- a/boards.cfg +++ b/boards.cfg @@ -401,7 +401,6 @@ lpd7a400 arm lh7a40x lpd7a40x lpd7a404 arm lh7a40x lpd7a40x colibri_pxa270 arm pxa pxa255_idp arm pxa -xsengine arm pxa zylonite arm pxa atngw100 avr32 at32ap - atmel at32ap700x atstk1002 avr32 at32ap atstk1000 atmel at32ap700x diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h deleted file mode 100644 index 9606b5316bf..00000000000 --- a/include/configs/xsengine.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_XSENGINE 1 -#define CONFIG_MMC 1 -#define CONFIG_DOS_PARTITION 1 -#define BOARD_LATE_INIT 1 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_NO_DCACHE - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* FLASH organization */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x00000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 127 KB sectors */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/* - * JFFS2 partitions - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=xsengine-0" -#define MTDPARTS_DEFAULT "mtdparts=xsengine-0:256k(uboot),1m(kernel1),8m(kernel2)" -*/ - -/* Environment settings */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) /* Addr of Environment Sector (after monitor)*/ -#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Size of the Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* 16kB Total Size of Environment Sector */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (75*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (50*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -/* Hardware drivers */ -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x04000300 -#define CONFIG_SMC_USE_32_BIT 1 - -/* select serial console configuration */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_FAT -#define CONFIG_CMD_PING -#define CONFIG_CMD_JFFS2 - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.1.50 -#define CONFIG_SERVERIP 192.168.1.2 -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS1,115200" -#define CONFIG_CMDLINE_TAG - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "XS-Engine u-boot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_MEMTEST_START 0xA0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xA0800000 /* 4 ... 8 MB in DRAM */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ -#define CONFIG_SYS_LOAD_ADDR 0xA0000000 /* load kernel to this address */ - -#ifdef CONFIG_MMC -#define CONFIG_PXA_MMC -#define CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#endif - -/* Stack sizes - The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* GP set register */ -#define CONFIG_SYS_GPSR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ -#define CONFIG_SYS_GPSR1_VAL 0x00020000 /* nPWE */ -#define CONFIG_SYS_GPSR2_VAL 0x0000C000 /* CS2, CS3 */ - -/* GP clear register */ -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 - -/* GP direction register */ -#define CONFIG_SYS_GPDR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ -#define CONFIG_SYS_GPDR1_VAL 0x00022A80 /* nPWE, FFUART + BTUART pins */ -#define CONFIG_SYS_GPDR2_VAL 0x0000C000 /* CS2, CS3 */ - -/* GP rising edge detect register */ -#define CONFIG_SYS_GRER0_VAL 0x00000000 -#define CONFIG_SYS_GRER1_VAL 0x00000000 -#define CONFIG_SYS_GRER2_VAL 0x00000000 - -/* GP falling edge detect register */ -#define CONFIG_SYS_GFER0_VAL 0x00000000 -#define CONFIG_SYS_GFER1_VAL 0x00000000 -#define CONFIG_SYS_GFER2_VAL 0x00000000 - -/* GP alternate function register */ -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 /* CS1 */ -#define CONFIG_SYS_GAFR0_U_VAL 0x00000010 /* RDY */ -#define CONFIG_SYS_GAFR1_L_VAL 0x09988050 /* FFUART + BTUART pins */ -#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 /* nPWE */ -#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 /* CS2, CS3 */ -#define CONFIG_SYS_GAFR2_U_VAL 0x00000000 - -#define CONFIG_SYS_PSSR_VAL 0x00000020 /* Power manager sleep status */ -#define CONFIG_SYS_CCCR_VAL 0x00000161 /* 100 MHz memory, 400 MHz CPU */ -#define CONFIG_SYS_CKEN_VAL 0x000000C0 /* BTUART and FFUART enabled */ -#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ - -/* Memory settings */ -#define CONFIG_SYS_MSC0_VAL 0x25F425F0 - -/* MDCNFG: SDRAM Configuration Register */ -#define CONFIG_SYS_MDCNFG_VAL 0x000009C9 - -/* MDREFR: SDRAM Refresh Control Register */ -#define CONFIG_SYS_MDREFR_VAL 0x00018018 - -/* MDMRS: Mode Register Set Configuration Register */ -#define CONFIG_SYS_MDMRS_VAL 0x00220022 - -#endif /* __CONFIG_H */ From 4c66447ae77e52edd5d9df33bd8a3457860713b8 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 22 Oct 2010 01:32:56 -0500 Subject: [PATCH 044/116] corenet_ds: Update CONFIG_SYS_GBL_DATA_SIZE to deal with growth in gd_t The recent change the env code added an additional 32 bytes into gd_t and that causes to grow pass the previous CONFIG_SYS_GBL_DATA_SIZE size. Signed-off-by: Kumar Gala --- include/configs/corenet_ds.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 85147d00219..2733fb21e35 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -213,7 +213,7 @@ #endif #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET From 9660c5de74aae900077c3769d7d18b39a124d9d5 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 22 Oct 2010 00:20:22 -0500 Subject: [PATCH 045/116] xes: Use common PCI initialization code Common Freescale code for PCI initialization now exists, so migrate X-ES boards to use it. Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- board/xes/common/fsl_8xxx_pci.c | 322 +++++--------------------------- include/configs/XPEDITE5170.h | 12 +- include/configs/XPEDITE5200.h | 6 +- include/configs/XPEDITE5370.h | 12 +- 4 files changed, 61 insertions(+), 291 deletions(-) diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c index ece78825778..f425ceedc45 100644 --- a/board/xes/common/fsl_8xxx_pci.c +++ b/board/xes/common/fsl_8xxx_pci.c @@ -25,10 +25,10 @@ #include #include #include +#include #include #include -int first_free_busno = 0; #ifdef CONFIG_PCI1 static struct pci_controller pci1_hose; @@ -43,111 +43,6 @@ static struct pci_controller pcie2_hose; static struct pci_controller pcie3_hose; #endif -#ifdef CONFIG_MPC8572 -/* Correlate host/agent POR bits to usable info. Table 4-14 */ -struct host_agent_cfg_t { - uchar pcie_root[3]; - uchar rio_host; -} host_agent_cfg[8] = { - {{0, 0, 0}, 0}, - {{0, 1, 1}, 1}, - {{1, 0, 1}, 0}, - {{1, 1, 0}, 1}, - {{0, 0, 1}, 0}, - {{0, 1, 0}, 1}, - {{1, 0, 0}, 0}, - {{1, 1, 1}, 1} -}; - -/* Correlate port width POR bits to usable info. Table 4-15 */ -struct io_port_cfg_t { - uchar pcie_width[3]; - uchar rio_width; -} io_port_cfg[16] = { - {{0, 0, 0}, 0}, - {{0, 0, 0}, 0}, - {{4, 0, 0}, 0}, - {{4, 4, 0}, 0}, - {{0, 0, 0}, 0}, - {{0, 0, 0}, 0}, - {{0, 0, 0}, 4}, - {{4, 2, 2}, 0}, - {{0, 0, 0}, 0}, - {{0, 0, 0}, 0}, - {{0, 0, 0}, 0}, - {{4, 0, 0}, 4}, - {{4, 0, 0}, 4}, - {{0, 0, 0}, 4}, - {{0, 0, 0}, 4}, - {{8, 0, 0}, 0}, -}; -#elif defined CONFIG_MPC8548 -/* Correlate host/agent POR bits to usable info. Table 4-12 */ -struct host_agent_cfg_t { - uchar pci_host[2]; - uchar pcie_root[1]; - uchar rio_host; -} host_agent_cfg[8] = { - {{1, 1}, {0}, 0}, - {{1, 1}, {1}, 0}, - {{1, 1}, {0}, 1}, - {{0, 0}, {0}, 0}, /* reserved */ - {{0, 1}, {1}, 0}, - {{1, 1}, {1}, 0}, - {{0, 1}, {1}, 1}, - {{1, 1}, {1}, 1} -}; - -/* Correlate port width POR bits to usable info. Table 4-13 */ -struct io_port_cfg_t { - uchar pcie_width[1]; - uchar rio_width; -} io_port_cfg[8] = { - {{0}, 0}, - {{0}, 0}, - {{0}, 0}, - {{4}, 4}, - {{4}, 4}, - {{0}, 4}, - {{0}, 4}, - {{8}, 0}, -}; -#elif defined CONFIG_MPC86xx -/* Correlate host/agent POR bits to usable info. Table 4-17 */ -struct host_agent_cfg_t { - uchar pcie_root[2]; - uchar rio_host; -} host_agent_cfg[8] = { - {{0, 0}, 0}, - {{1, 0}, 1}, - {{0, 1}, 0}, - {{1, 1}, 1} -}; - -/* Correlate port width POR bits to usable info. Table 4-16 */ -struct io_port_cfg_t { - uchar pcie_width[2]; - uchar rio_width; -} io_port_cfg[16] = { - {{0, 0}, 0}, - {{0, 0}, 0}, - {{8, 0}, 0}, - {{8, 8}, 0}, - {{0, 0}, 0}, - {{8, 0}, 4}, - {{8, 0}, 4}, - {{8, 0}, 4}, - {{0, 0}, 0}, - {{0, 0}, 4}, - {{0, 0}, 4}, - {{0, 0}, 4}, - {{0, 0}, 0}, - {{0, 0}, 0}, - {{0, 8}, 0}, - {{8, 8}, 0}, -}; -#endif - /* * 85xx and 86xx share naming conventions, but different layout. * Correlate names to CPU-specific values to share common @@ -173,22 +68,22 @@ struct io_port_cfg_t { void pci_init_board(void) { - struct pci_controller *hose; - volatile ccsr_fsl_pci_t *pci; - int width; - int host; + struct fsl_pci_info pci_info[3]; + int first_free_busno = 0; + int num = 0; + int pcie_ep; + __maybe_unused int pcie_configured; + #if defined(CONFIG_MPC85xx) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #elif defined(CONFIG_MPC86xx) immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; #endif - uint devdisr = in_be32(&gur->devdisr); - uint io_sel = (in_be32(&gur->pordevsr) & MPC8xxx_PORDEVSR_IO_SEL) >> + u32 devdisr = in_be32(&gur->devdisr); + u32 pordevsr = in_be32(&gur->pordevsr); + __maybe_unused uint io_sel = (pordevsr & MPC8xxx_PORDEVSR_IO_SEL) >> MPC8xxx_PORDEVSR_IO_SEL_SHIFT; - uint host_agent = (in_be32(&gur->porbmsr) & MPC8xxx_PORBMSR_HA) >> - MPC8xxx_PORBMSR_HA_SHIFT; - struct pci_region *r; #ifdef CONFIG_PCI1 uint pci_spd_norm = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_SPD; @@ -197,49 +92,19 @@ void pci_init_board(void) uint pcix = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1; uint freq = CONFIG_SYS_CLK_FREQ / 1000 / 1000; - width = 0; /* Silence compiler warning... */ - io_sel &= 0xf; /* Silence compiler warning... */ - pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - hose = &pci1_hose; - host = host_agent_cfg[host_agent].pci_host[0]; - r = hose->regions; - if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { + SET_STD_PCI_INFO(pci_info[num], 1); + pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs); printf("\n PCI1: %d bit %s, %s %d MHz, %s, %s\n", pci_32 ? 32 : 64, pcix ? "PCIX" : "PCI", pci_spd_norm ? ">=" : "<=", pcix ? freq * 2 : freq, - host ? "host" : "agent", + pcie_ep ? "agent" : "host", pci_arb ? "arbiter" : "external-arbiter"); - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCI1_MEM_BASE, - CONFIG_SYS_PCI1_MEM_PHYS, - CONFIG_SYS_PCI1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCI1_IO_BASE, - CONFIG_SYS_PCI1_IO_PHYS, - CONFIG_SYS_PCI1_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - - hose->first_busno = first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - /* Unlock inbound PCI configuration cycles */ - if (!host) - fsl_pci_config_unlock(hose); - - first_free_busno = hose->last_busno + 1; - printf(" PCI1 on bus %02x - %02x\n", - hose->first_busno, hose->last_busno); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pci1_hose, first_free_busno); } else { printf(" PCI1: disabled\n"); } @@ -247,148 +112,53 @@ void pci_init_board(void) /* PCI1 not present on MPC8572 */ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); #endif + #ifdef CONFIG_PCIE1 - pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - hose = &pcie1_hose; - host = host_agent_cfg[host_agent].pcie_root[0]; - width = io_port_cfg[io_sel].pcie_width[0]; - r = hose->regions; + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) { - printf("\n PCIE1 connected as %s (x%d)", - host ? "Root Complex" : "Endpoint", width); - if (in_be32(&pci->pme_msg_det)) { - out_be32(&pci->pme_msg_det, 0xffffffff); - debug(" with errors. Clearing. Now 0x%08x", - in_be32(&pci->pme_msg_det)); - } - printf("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_MEM_BASE, - CONFIG_SYS_PCIE1_MEM_PHYS, - CONFIG_SYS_PCIE1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_IO_BASE, - CONFIG_SYS_PCIE1_IO_PHYS, - CONFIG_SYS_PCIE1_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - - hose->first_busno = first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - /* Unlock inbound PCI configuration cycles */ - if (!host) - fsl_pci_config_unlock(hose); - - first_free_busno = hose->last_busno + 1; - printf(" PCIE1 on bus %02x - %02x\n", - hose->first_busno, hose->last_busno); + if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) { + SET_STD_PCIE_INFO(pci_info[num], 1); + pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); + printf(" PCIE1 connected as %s\n", + pcie_ep ? "Endpoint" : "Root Complex"); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie1_hose, first_free_busno); + } else { + printf(" PCIE1: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE1); #endif /* CONFIG_PCIE1 */ #ifdef CONFIG_PCIE2 - pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; - hose = &pcie2_hose; - host = host_agent_cfg[host_agent].pcie_root[1]; - width = io_port_cfg[io_sel].pcie_width[1]; - r = hose->regions; + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); - if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) { - printf("\n PCIE2 connected as %s (x%d)", - host ? "Root Complex" : "Endpoint", width); - if (in_be32(&pci->pme_msg_det)) { - out_be32(&pci->pme_msg_det, 0xffffffff); - debug(" with errors. Clearing. Now 0x%08x", - in_be32(&pci->pme_msg_det)); - } - printf("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE2_MEM_BASE, - CONFIG_SYS_PCIE2_MEM_PHYS, - CONFIG_SYS_PCIE2_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE2_IO_BASE, - CONFIG_SYS_PCIE2_IO_PHYS, - CONFIG_SYS_PCIE2_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - - hose->first_busno = first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - /* Unlock inbound PCI configuration cycles */ - if (!host) - fsl_pci_config_unlock(hose); - - first_free_busno = hose->last_busno + 1; - printf(" PCIE2 on bus %02x - %02x\n", - hose->first_busno, hose->last_busno); + if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) { + SET_STD_PCIE_INFO(pci_info[num], 2); + pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); + printf(" PCIE2 connected as %s\n", + pcie_ep ? "Endpoint" : "Root Complex"); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie2_hose, first_free_busno); + } else { + printf(" PCIE2: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE2); #endif /* CONFIG_PCIE2 */ #ifdef CONFIG_PCIE3 - pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; - hose = &pcie3_hose; - host = host_agent_cfg[host_agent].pcie_root[2]; - width = io_port_cfg[io_sel].pcie_width[2]; - r = hose->regions; + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel); - if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) { - printf("\n PCIE3 connected as %s (x%d)", - host ? "Root Complex" : "Endpoint", width); - if (in_be32(&pci->pme_msg_det)) { - out_be32(&pci->pme_msg_det, 0xffffffff); - debug(" with errors. Clearing. Now 0x%08x", - in_be32(&pci->pme_msg_det)); - } - printf("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE3_MEM_BASE, - CONFIG_SYS_PCIE3_MEM_PHYS, - CONFIG_SYS_PCIE3_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE3_IO_BASE, - CONFIG_SYS_PCIE3_IO_PHYS, - CONFIG_SYS_PCIE3_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - - hose->first_busno = first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - /* Unlock inbound PCI configuration cycles */ - if (!host) - fsl_pci_config_unlock(hose); - - first_free_busno = hose->last_busno + 1; - printf(" PCIE3 on bus %02x - %02x\n", - hose->first_busno, hose->last_busno); + if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) { + SET_STD_PCIE_INFO(pci_info[num], 3); + pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); + printf(" PCIE3 connected as %s\n", + pcie_ep ? "Endpoint" : "Root Complex"); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie3_hose, first_free_busno); + } else { + printf(" PCIE3: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE3); diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h index 1851997916c..9ff28a29132 100644 --- a/include/configs/XPEDITE5170.h +++ b/include/configs/XPEDITE5170.h @@ -324,18 +324,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * Memory space is mapped 1-1, but I/O space must start from 0. */ /* PCIE1 - PEX8518 */ -#define CONFIG_SYS_PCIE1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS #define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */ -#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 #define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ /* PCIE2 - VPX P1 */ -#define CONFIG_SYS_PCIE2_MEM_BASE 0xc0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE +#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 #define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */ diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index d0e9492b4ed..db03777a79d 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -268,10 +268,10 @@ * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE +#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS #define CONFIG_SYS_PCI1_MEM_SIZE 0x40000000 /* 1G */ -#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI1_IO_BUS 0x00000000 #define CONFIG_SYS_PCI1_IO_PHYS 0xe8000000 #define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 1M */ diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index 629dc0d89c6..01047c85eee 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -334,18 +334,18 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); * Memory space is mapped 1-1, but I/O space must start from 0. */ /* PCIE1 - VPX P1 */ -#define CONFIG_SYS_PCIE1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS #define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */ -#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 #define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ /* PCIE2 - PEX8518 */ -#define CONFIG_SYS_PCIE2_MEM_BASE 0xc0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE +#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 #define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */ From 96d6160324c49c81df10b6b4c75d2470cb30dce4 Mon Sep 17 00:00:00 2001 From: John Schmoller Date: Fri, 22 Oct 2010 00:20:23 -0500 Subject: [PATCH 046/116] pci: Add ability to re-enumerate PCI buses Add a new 'pci enum' command which re-enumerates the PCI buses. This command is enabled via the CONFIG_CMD_PCI_ENUM define and can be useful in boards with FPGAs connected via PCI/PCIe, boards that support PCI hot-plugging, or during PCI debug. Also enable the 'pci enum' command for X-ES's Freescale-based boards. Signed-off-by: John Schmoller Signed-off-by: Peter Tyser Acked-by: Kumar Gala Acked-by: Wolfgang Denk --- common/cmd_pci.c | 13 +++++++++++++ drivers/pci/fsl_pci_init.c | 3 +++ drivers/pci/pci.c | 4 +++- include/configs/XPEDITE5170.h | 1 + include/configs/XPEDITE5200.h | 1 + include/configs/XPEDITE5370.h | 1 + 6 files changed, 22 insertions(+), 1 deletion(-) diff --git a/common/cmd_pci.c b/common/cmd_pci.c index 4bde0599118..ccf5adaaad6 100644 --- a/common/cmd_pci.c +++ b/common/cmd_pci.c @@ -497,6 +497,10 @@ int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if ((bdf = get_pci_dev(argv[2])) == -1) return 1; break; +#ifdef CONFIG_CMD_PCI_ENUM + case 'e': + break; +#endif default: /* scan bus */ value = 1; /* short listing */ bdf = 0; /* bus number */ @@ -518,6 +522,11 @@ int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; case 'd': /* display */ return pci_cfg_display(bdf, addr, size, value); +#ifdef CONFIG_CMD_PCI_ENUM + case 'e': + pci_init(); + return 0; +#endif case 'n': /* next */ if (argc < 4) goto usage; @@ -545,6 +554,10 @@ U_BOOT_CMD( "list and access PCI Configuration Space", "[bus] [long]\n" " - short or long list of PCI devices on bus 'bus'\n" +#ifdef CONFIG_CMD_PCI_ENUM + "pci enum\n" + " - re-enumerate PCI buses\n" +#endif "pci header b.d.f\n" " - show header of PCI device 'bus.device.function'\n" "pci display[.b, .w, .l] b.d.f [address] [# of objects]\n" diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 001e6eb9007..1f021036e5f 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -91,6 +91,9 @@ int fsl_setup_hose(struct pci_controller *hose, unsigned long addr) { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) addr; + /* Reset hose to make sure its in a clean state */ + memset(hose, 0, sizeof(struct pci_controller)); + pci_setup_indirect(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); return fsl_is_pci_agent(hose); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index cd64a87fc6d..848746f1ed2 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -139,7 +139,7 @@ void *pci_map_bar(pci_dev_t pdev, int bar, int flags) * */ -static struct pci_controller* hose_head = NULL; +static struct pci_controller* hose_head; void pci_register_hose(struct pci_controller* hose) { @@ -640,6 +640,8 @@ void pci_init(void) } #endif /* CONFIG_PCI_BOOTDELAY */ + hose_head = NULL; + /* now call board specific pci_init()... */ pci_init_board(); } diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h index 9ff28a29132..ab6d4b4ecb3 100644 --- a/include/configs/XPEDITE5170.h +++ b/include/configs/XPEDITE5170.h @@ -545,6 +545,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO #define CONFIG_CMD_PCI +#define CONFIG_CMD_PCI_ENUM #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SNTP diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index db03777a79d..00cd5162812 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -339,6 +339,7 @@ #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO #define CONFIG_CMD_PCI +#define CONFIG_CMD_PCI_ENUM #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP #define CONFIG_CMD_REGINFO diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index 01047c85eee..73e3d52e835 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -396,6 +396,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO #define CONFIG_CMD_PCI +#define CONFIG_CMD_PCI_ENUM #define CONFIG_CMD_PING #define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SNTP From 92af6549b8c52e9c973e4e197aa4d1edf4df5803 Mon Sep 17 00:00:00 2001 From: John Schmoller Date: Fri, 22 Oct 2010 00:20:24 -0500 Subject: [PATCH 047/116] xes: Consolidate checkboard() Create a common checkboard() function to support all X-ES's Freescale boards. Also, add a get_board_derivative() function which reads hardware strapping resistors to determine what model a board is. This allows one U-Boot image to support multiple boards. Signed-off-by: John Schmoller Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- board/xes/common/Makefile | 2 + board/xes/common/board.c | 64 +++++++++++++++++++++++++++++ board/xes/common/fsl_8xxx_misc.c | 47 +++++++++++++++++++++ board/xes/common/fsl_8xxx_misc.h | 28 +++++++++++++ board/xes/xpedite5170/xpedite5170.c | 20 +-------- board/xes/xpedite5200/xpedite5200.c | 27 ------------ board/xes/xpedite5370/xpedite5370.c | 20 --------- include/configs/XPEDITE1000.h | 1 + include/configs/XPEDITE5170.h | 1 + include/configs/XPEDITE5200.h | 1 + include/configs/XPEDITE5370.h | 1 + 11 files changed, 146 insertions(+), 66 deletions(-) create mode 100644 board/xes/common/board.c create mode 100644 board/xes/common/fsl_8xxx_misc.c create mode 100644 board/xes/common/fsl_8xxx_misc.h diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile index d022831830a..bfade319b9c 100644 --- a/board/xes/common/Makefile +++ b/board/xes/common/Makefile @@ -33,6 +33,8 @@ COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o COBJS-$(CONFIG_MPC8572) += fsl_8xxx_clk.o COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o COBJS-$(CONFIG_FSL_DDR2) += fsl_8xxx_ddr.o +COBJS-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o +COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_misc.o board.o COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) diff --git a/board/xes/common/board.c b/board/xes/common/board.c new file mode 100644 index 00000000000..738f0a6486b --- /dev/null +++ b/board/xes/common/board.c @@ -0,0 +1,64 @@ +/* + * Copyright 2009 Extreme Engineering Solutions, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include "fsl_8xxx_misc.h" + +int checkboard(void) +{ + char name[] = CONFIG_SYS_BOARD_NAME; + char *s; + +#ifdef CONFIG_SYS_FORM_CUSTOM + s = "Custom"; +#elif CONFIG_SYS_FORM_6U_CPCI + s = "6U CompactPCI"; +#elif CONFIG_SYS_FORM_ATCA_PMC + s = "ATCA w/PMC"; +#elif CONFIG_SYS_FORM_ATCA_AMC + s = "ATCA w/AMC"; +#elif CONFIG_SYS_FORM_VME + s = "VME"; +#elif CONFIG_SYS_FORM_6U_VPX + s = "6U VPX"; +#elif CONFIG_SYS_FORM_PMC + s = "PMC"; +#elif CONFIG_SYS_FORM_PCI + s = "PCI"; +#elif CONFIG_SYS_FORM_3U_CPCI + s = "3U CompactPCI"; +#elif CONFIG_SYS_FORM_AMC + s = "AdvancedMC"; +#elif CONFIG_SYS_FORM_XMC + s = "XMC"; +#elif CONFIG_SYS_FORM_PMC_XMC + s = "PMC/XMC"; +#elif CONFIG_SYS_FORM_PCI_EXPRESS + s = "PCI Express"; +#elif CONFIG_SYS_FORM_3U_VPX + s = "3U VPX"; +#else +#error "Form factor not defined" +#endif + + name[strlen(name) - 1] += get_board_derivative(); + printf("Board: X-ES %s %s SBC\n", name, s); + + /* Display board specific information */ + puts(" "); + if ((s = getenv("board_rev"))) + printf("Rev %s, ", s); + if ((s = getenv("serial#"))) + printf("Serial# %s, ", s); + if ((s = getenv("board_cfg"))) + printf("Cfg %s", s); + puts("\n"); + + return 0; +} diff --git a/board/xes/common/fsl_8xxx_misc.c b/board/xes/common/fsl_8xxx_misc.c new file mode 100644 index 00000000000..e37a3c1123b --- /dev/null +++ b/board/xes/common/fsl_8xxx_misc.c @@ -0,0 +1,47 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +/* + * Return a board's derivative model number. For example: + * return 2 for the XPedite5372 and return 1 for the XPedite5201. + */ +uint get_board_derivative(void) +{ +#if defined(CONFIG_MPC85xx) + volatile ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; +#elif defined(CONFIG_MPC86xx) + volatile immap_t *immap = (immap_t *)CONFIG_SYS_CCSRBAR; + volatile ccsr_gur_t *gur = &immap->im_gur; +#endif + + /* + * The top 4 lines of the local bus address are pulled low/high and + * can be read to determine the least significant digit of a board's + * model number. + */ + return gur->gpporcr >> 28; +} + + diff --git a/board/xes/common/fsl_8xxx_misc.h b/board/xes/common/fsl_8xxx_misc.h new file mode 100644 index 00000000000..ecc70daba13 --- /dev/null +++ b/board/xes/common/fsl_8xxx_misc.h @@ -0,0 +1,28 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FSL_8XXX_MISC_H___ +#define __FSL_8XXX_MISC_H___ + +uint get_board_derivative(void); + +#endif /* __FSL_8XXX_MISC_H__ */ diff --git a/board/xes/xpedite5170/xpedite5170.c b/board/xes/xpedite5170/xpedite5170.c index 58229418f36..0f7fa6c43ab 100644 --- a/board/xes/xpedite5170/xpedite5170.c +++ b/board/xes/xpedite5170/xpedite5170.c @@ -26,30 +26,12 @@ #include #include #include +#include "../common/fsl_8xxx_misc.h" #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_PCI) extern void ft_board_pci_setup(void *blob, bd_t *bd); #endif -int checkboard(void) -{ - char *s; - - printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME); - printf(" "); - s = getenv("board_rev"); - if (s) - printf("Rev %s, ", s); - s = getenv("serial#"); - if (s) - printf("Serial# %s, ", s); - s = getenv("board_cfg"); - if (s) - printf("Cfg %s", s); - printf("\n"); - - return 0; -} /* * Print out which flash was booted from and if booting from the 2nd flash, * swap flash chip selects to maintain consistent flash numbering/addresses. diff --git a/board/xes/xpedite5200/xpedite5200.c b/board/xes/xpedite5200/xpedite5200.c index a2627f86736..dc5c9651142 100644 --- a/board/xes/xpedite5200/xpedite5200.c +++ b/board/xes/xpedite5200/xpedite5200.c @@ -36,33 +36,6 @@ extern void ft_board_pci_setup(void *blob, bd_t *bd); -int checkboard(void) -{ - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); - char *s; - - printf("Board: X-ES %s PMC\n", CONFIG_SYS_BOARD_NAME); - printf(" "); - s = getenv("board_rev"); - if (s) - printf("Rev %s, ", s); - s = getenv("serial#"); - if (s) - printf("Serial# %s, ", s); - s = getenv("board_cfg"); - if (s) - printf("Cfg %s", s); - printf("\n"); - - out_be32(&lbc->ltesr, 0xffffffff); /* Clear LBC error IRQs */ - out_be32(&lbc->lteir, 0xffffffff); /* Enable LBC error IRQs */ - out_be32(&ecm->eedr, 0xffffffff); /* Clear ecm errors */ - out_be32(&ecm->eeer, 0xffffffff); /* Enable ecm errors */ - - return 0; -} - static void flash_cs_fixup(void) { int flash_sel; diff --git a/board/xes/xpedite5370/xpedite5370.c b/board/xes/xpedite5370/xpedite5370.c index 2a060c24625..89fa6c78b30 100644 --- a/board/xes/xpedite5370/xpedite5370.c +++ b/board/xes/xpedite5370/xpedite5370.c @@ -36,26 +36,6 @@ DECLARE_GLOBAL_DATA_PTR; extern void ft_board_pci_setup(void *blob, bd_t *bd); -int checkboard(void) -{ - char *s; - - printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME); - printf(" "); - s = getenv("board_rev"); - if (s) - printf("Rev %s, ", s); - s = getenv("serial#"); - if (s) - printf("Serial# %s, ", s); - s = getenv("board_cfg"); - if (s) - printf("Cfg %s", s); - printf("\n"); - - return 0; -} - static void flash_cs_fixup(void) { int flash_sel; diff --git a/include/configs/XPEDITE1000.h b/include/configs/XPEDITE1000.h index 56058497742..64030dd218c 100644 --- a/include/configs/XPEDITE1000.h +++ b/include/configs/XPEDITE1000.h @@ -33,6 +33,7 @@ /* High Level Configuration Options */ #define CONFIG_XPEDITE1000 1 #define CONFIG_SYS_BOARD_NAME "XPedite1000" +#define CONFIG_SYS_FORM_PMC 1 #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 #define CONFIG_440GX 1 /* 440 GX */ diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h index ab6d4b4ecb3..eeae5f0ff62 100644 --- a/include/configs/XPEDITE5170.h +++ b/include/configs/XPEDITE5170.h @@ -34,6 +34,7 @@ #define CONFIG_MPC8641 1 /* MPC8641 specific */ #define CONFIG_XPEDITE5140 1 /* MPC8641HPCN board specific */ #define CONFIG_SYS_BOARD_NAME "XPedite5170" +#define CONFIG_SYS_FORM_3U_VPX 1 #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ #define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ #define CONFIG_BAT_RW 1 /* Use common BAT rw code */ diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index 00cd5162812..4221829cb09 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -36,6 +36,7 @@ #define CONFIG_MPC8548 1 #define CONFIG_XPEDITE5200 1 #define CONFIG_SYS_BOARD_NAME "XPedite5200" +#define CONFIG_SYS_FORM_PMC_XMC 1 #define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index 73e3d52e835..9b0ac4b4045 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -36,6 +36,7 @@ #define CONFIG_MPC8572 1 #define CONFIG_XPEDITE5370 1 #define CONFIG_SYS_BOARD_NAME "XPedite5370" +#define CONFIG_SYS_FORM_3U_VPX 1 #define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ #ifndef CONFIG_SYS_TEXT_BASE From 72fb68d53cfbe505319cbb4aa92a1fe7ecf3d4fb Mon Sep 17 00:00:00 2001 From: John Schmoller Date: Fri, 22 Oct 2010 00:20:25 -0500 Subject: [PATCH 048/116] xes: Add board_flash_wp_on() Add board_flash_wp_on() to check a pca9557 gpio pin to see if non-volatile memory write protection is enabled. Previously, write protected NOR flashes would fail initialization which resulted in a bootup error such as: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: ## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB ## Unknown FLASH on Bank 2 - Size = 0x00000000 = 0 MB *** failed *** ### ERROR ### Please RESET the board ### With this patch, NOR flash initialization is skipped: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: Uninitialized - Write Protect On L2: 1024 KB enabled NAND: 1024 MiB ... Note that flash related commands such as flinfo and saveenv will error out when flash write protection is enabled. Signed-off-by: John Schmoller Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- board/xes/common/fsl_8xxx_misc.c | 15 +++++++++++++++ include/configs/XPEDITE5200.h | 2 +- 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/board/xes/common/fsl_8xxx_misc.c b/board/xes/common/fsl_8xxx_misc.c index e37a3c1123b..b7fa6950b07 100644 --- a/board/xes/common/fsl_8xxx_misc.c +++ b/board/xes/common/fsl_8xxx_misc.c @@ -22,6 +22,21 @@ #include #include +#ifdef CONFIG_PCA953X +#include + +/* + * Determine if a board's flashes are write protected + */ +int board_flash_wp_on(void) +{ + if (pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) & + CONFIG_SYS_PCA953X_NVM_WP) + return 1; + + return 0; +} +#endif /* * Return a board's derivative model number. For example: diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index 4221829cb09..1ad9b461d36 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -251,7 +251,7 @@ #define CONFIG_SYS_PCA953X_BRD_CFG2 0x04 #define CONFIG_SYS_PCA953X_XMC_ROOT0 0x08 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS 0x10 -#define CONFIG_SYS_PCA953X_FLASH_WP 0x20 +#define CONFIG_SYS_PCA953X_NVM_WP 0x20 #define CONFIG_SYS_PCA953X_MONARCH 0x40 #define CONFIG_SYS_PCA953X_EREADY 0x80 From c00ac259f60112bb263a73f211ce3bb8f529c2c0 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 22 Oct 2010 00:20:26 -0500 Subject: [PATCH 049/116] xes: Make X-ES board names more generic Some U-Boot images for X-ES boards support multiple products in the same family. For example, the XPedite5370, XPedite5371, and XPedite5372 are similar enough that one U-Boot image can work on all 3 cards. To make it clear that a U-Boot image can work on boards of the same family, rename the boards with the least significant digit of 'x'. While we're at it, change the board config file and make targets to be lowercase. Also change the default uImage and fdt filenames to "board.uImage" and "board.dtb" to be more generic. Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- MAINTAINERS | 8 ++++---- board/xes/{xpedite5170 => xpedite517x}/Makefile | 0 board/xes/{xpedite5170 => xpedite517x}/ddr.c | 0 board/xes/{xpedite5170 => xpedite517x}/law.c | 0 .../xpedite5170.c => xpedite517x/xpedite517x.c} | 0 board/xes/{xpedite5200 => xpedite520x}/Makefile | 0 board/xes/{xpedite5200 => xpedite520x}/ddr.c | 0 board/xes/{xpedite5200 => xpedite520x}/law.c | 0 board/xes/{xpedite5200 => xpedite520x}/tlb.c | 0 .../xpedite5200.c => xpedite520x/xpedite520x.c} | 0 board/xes/{xpedite5370 => xpedite537x}/Makefile | 0 board/xes/{xpedite5370 => xpedite537x}/ddr.c | 0 board/xes/{xpedite5370 => xpedite537x}/law.c | 0 board/xes/{xpedite5370 => xpedite537x}/tlb.c | 0 .../xpedite5370.c => xpedite537x/xpedite537x.c} | 0 boards.cfg | 8 ++++---- include/configs/{XPEDITE1000.h => xpedite1000.h} | 4 ++-- include/configs/{XPEDITE5170.h => xpedite517x.h} | 6 +++--- include/configs/{XPEDITE5200.h => xpedite520x.h} | 6 +++--- include/configs/{XPEDITE5370.h => xpedite537x.h} | 6 +++--- 20 files changed, 19 insertions(+), 19 deletions(-) rename board/xes/{xpedite5170 => xpedite517x}/Makefile (100%) rename board/xes/{xpedite5170 => xpedite517x}/ddr.c (100%) rename board/xes/{xpedite5170 => xpedite517x}/law.c (100%) rename board/xes/{xpedite5170/xpedite5170.c => xpedite517x/xpedite517x.c} (100%) rename board/xes/{xpedite5200 => xpedite520x}/Makefile (100%) rename board/xes/{xpedite5200 => xpedite520x}/ddr.c (100%) rename board/xes/{xpedite5200 => xpedite520x}/law.c (100%) rename board/xes/{xpedite5200 => xpedite520x}/tlb.c (100%) rename board/xes/{xpedite5200/xpedite5200.c => xpedite520x/xpedite520x.c} (100%) rename board/xes/{xpedite5370 => xpedite537x}/Makefile (100%) rename board/xes/{xpedite5370 => xpedite537x}/ddr.c (100%) rename board/xes/{xpedite5370 => xpedite537x}/law.c (100%) rename board/xes/{xpedite5370 => xpedite537x}/tlb.c (100%) rename board/xes/{xpedite5370/xpedite5370.c => xpedite537x/xpedite537x.c} (100%) rename include/configs/{XPEDITE1000.h => xpedite1000.h} (99%) rename include/configs/{XPEDITE5170.h => xpedite517x.h} (99%) rename include/configs/{XPEDITE5200.h => xpedite520x.h} (99%) rename include/configs/{XPEDITE5370.h => xpedite537x.h} (99%) diff --git a/MAINTAINERS b/MAINTAINERS index 2f61776e911..2da05611ad9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -462,10 +462,10 @@ Rune Torgersen Peter Tyser - XPEDITE1000 PPC440GX - XPEDITE5170 MPC8640 - XPEDITE5200 MPC8548 - XPEDITE5370 MPC8572 + xpedite1000 PPC440GX + xpedite5170 MPC8640 + xpedite5200 MPC8548 + xpedite5370 MPC8572 David Updegraff diff --git a/board/xes/xpedite5170/Makefile b/board/xes/xpedite517x/Makefile similarity index 100% rename from board/xes/xpedite5170/Makefile rename to board/xes/xpedite517x/Makefile diff --git a/board/xes/xpedite5170/ddr.c b/board/xes/xpedite517x/ddr.c similarity index 100% rename from board/xes/xpedite5170/ddr.c rename to board/xes/xpedite517x/ddr.c diff --git a/board/xes/xpedite5170/law.c b/board/xes/xpedite517x/law.c similarity index 100% rename from board/xes/xpedite5170/law.c rename to board/xes/xpedite517x/law.c diff --git a/board/xes/xpedite5170/xpedite5170.c b/board/xes/xpedite517x/xpedite517x.c similarity index 100% rename from board/xes/xpedite5170/xpedite5170.c rename to board/xes/xpedite517x/xpedite517x.c diff --git a/board/xes/xpedite5200/Makefile b/board/xes/xpedite520x/Makefile similarity index 100% rename from board/xes/xpedite5200/Makefile rename to board/xes/xpedite520x/Makefile diff --git a/board/xes/xpedite5200/ddr.c b/board/xes/xpedite520x/ddr.c similarity index 100% rename from board/xes/xpedite5200/ddr.c rename to board/xes/xpedite520x/ddr.c diff --git a/board/xes/xpedite5200/law.c b/board/xes/xpedite520x/law.c similarity index 100% rename from board/xes/xpedite5200/law.c rename to board/xes/xpedite520x/law.c diff --git a/board/xes/xpedite5200/tlb.c b/board/xes/xpedite520x/tlb.c similarity index 100% rename from board/xes/xpedite5200/tlb.c rename to board/xes/xpedite520x/tlb.c diff --git a/board/xes/xpedite5200/xpedite5200.c b/board/xes/xpedite520x/xpedite520x.c similarity index 100% rename from board/xes/xpedite5200/xpedite5200.c rename to board/xes/xpedite520x/xpedite520x.c diff --git a/board/xes/xpedite5370/Makefile b/board/xes/xpedite537x/Makefile similarity index 100% rename from board/xes/xpedite5370/Makefile rename to board/xes/xpedite537x/Makefile diff --git a/board/xes/xpedite5370/ddr.c b/board/xes/xpedite537x/ddr.c similarity index 100% rename from board/xes/xpedite5370/ddr.c rename to board/xes/xpedite537x/ddr.c diff --git a/board/xes/xpedite5370/law.c b/board/xes/xpedite537x/law.c similarity index 100% rename from board/xes/xpedite5370/law.c rename to board/xes/xpedite537x/law.c diff --git a/board/xes/xpedite5370/tlb.c b/board/xes/xpedite537x/tlb.c similarity index 100% rename from board/xes/xpedite5370/tlb.c rename to board/xes/xpedite537x/tlb.c diff --git a/board/xes/xpedite5370/xpedite5370.c b/board/xes/xpedite537x/xpedite537x.c similarity index 100% rename from board/xes/xpedite5370/xpedite5370.c rename to board/xes/xpedite537x/xpedite537x.c diff --git a/boards.cfg b/boards.cfg index 0f3292fd390..a524272404a 100644 --- a/boards.cfg +++ b/boards.cfg @@ -556,8 +556,8 @@ MPC8540ADS powerpc mpc85xx mpc8540ads freescale MPC8544DS powerpc mpc85xx mpc8544ds freescale MPC8560ADS powerpc mpc85xx mpc8560ads freescale MPC8568MDS powerpc mpc85xx mpc8568mds freescale -XPEDITE5200 powerpc mpc85xx xpedite5200 xes -XPEDITE5370 powerpc mpc85xx xpedite5370 xes +xpedite520x powerpc mpc85xx - xes +xpedite537x powerpc mpc85xx - xes sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540 sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540 sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33 @@ -597,7 +597,7 @@ P2020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020,NAND P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020,SDCARD sbc8641d powerpc mpc86xx MPC8610HPCD powerpc mpc86xx mpc8610hpcd freescale -XPEDITE5170 powerpc mpc86xx xpedite5170 xes +xpedite517x powerpc mpc86xx - xes MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale - MPC8641HPCN cogent_mpc8xx powerpc mpc8xx cogent ESTEEM192E powerpc mpc8xx esteem192e @@ -648,7 +648,7 @@ CPCIISER4 powerpc ppc4xx cpciiser4 esd DASA_SIM powerpc ppc4xx dasa_sim esd PMC405DE powerpc ppc4xx pmc405de esd METROBOX powerpc ppc4xx metrobox sandburst -XPEDITE1000 powerpc ppc4xx xpedite1000 xes +xpedite1000 powerpc ppc4xx - xes korat_perm powerpc ppc4xx korat - - korat:KORAT_PERMANENT haleakala powerpc ppc4xx kilauea amcc - kilauea:HALEAKALA sycamore powerpc ppc4xx walnut amcc - walnut diff --git a/include/configs/XPEDITE1000.h b/include/configs/xpedite1000.h similarity index 99% rename from include/configs/XPEDITE1000.h rename to include/configs/xpedite1000.h index 64030dd218c..d0f93635333 100644 --- a/include/configs/XPEDITE1000.h +++ b/include/configs/xpedite1000.h @@ -342,8 +342,8 @@ extern void out32(unsigned int, unsigned long); "misc_args=ip=on\0" \ "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ "bootfile=/home/user/file\0" \ - "osfile=/home/user/uImage-XPedite1000\0" \ - "fdtfile=/home/user/xpedite1000.dtb\0" \ + "osfile=/home/user/board.uImage\0" \ + "fdtfile=/home/user/board.dtb\0" \ "ubootfile=/home/user/u-boot.bin\0" \ "fdtaddr=c00000\0" \ "osaddr=0x1000000\0" \ diff --git a/include/configs/XPEDITE5170.h b/include/configs/xpedite517x.h similarity index 99% rename from include/configs/XPEDITE5170.h rename to include/configs/xpedite517x.h index eeae5f0ff62..2b6e895ec84 100644 --- a/include/configs/XPEDITE5170.h +++ b/include/configs/xpedite517x.h @@ -22,7 +22,7 @@ */ /* - * xpedite5170 board configuration file + * xpedite517x board configuration file */ #ifndef __CONFIG_H #define __CONFIG_H @@ -727,8 +727,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "misc_args=ip=on\0" \ "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ "bootfile=/home/user/file\0" \ - "osfile=/home/user/uImage-XPedite5170\0" \ - "fdtfile=/home/user/xpedite5170.dtb\0" \ + "osfile=/home/user/board.uImage\0" \ + "fdtfile=/home/user/board.dtb\0" \ "ubootfile=/home/user/u-boot.bin\0" \ "fdtaddr=c00000\0" \ "osaddr=0x1000000\0" \ diff --git a/include/configs/XPEDITE5200.h b/include/configs/xpedite520x.h similarity index 99% rename from include/configs/XPEDITE5200.h rename to include/configs/xpedite520x.h index 1ad9b461d36..fc15d8e83e2 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/xpedite520x.h @@ -22,7 +22,7 @@ */ /* - * xpedite5200 board configuration file + * xpedite520x board configuration file */ #ifndef __CONFIG_H #define __CONFIG_H @@ -523,8 +523,8 @@ "misc_args=ip=on\0" \ "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ "bootfile=/home/user/file\0" \ - "osfile=/home/user/uImage-XPedite5200\0" \ - "fdtfile=/home/user/xpedite5200.dtb\0" \ + "osfile=/home/user/board.uImage\0" \ + "fdtfile=/home/user/board.dtb\0" \ "ubootfile=/home/user/u-boot.bin\0" \ "fdtaddr=c00000\0" \ "osaddr=0x1000000\0" \ diff --git a/include/configs/XPEDITE5370.h b/include/configs/xpedite537x.h similarity index 99% rename from include/configs/XPEDITE5370.h rename to include/configs/xpedite537x.h index 9b0ac4b4045..309e32c568e 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/xpedite537x.h @@ -22,7 +22,7 @@ */ /* - * xpedite5370 board configuration file + * xpedite537x board configuration file */ #ifndef __CONFIG_H #define __CONFIG_H @@ -580,8 +580,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); "misc_args=ip=on\0" \ "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ "bootfile=/home/user/file\0" \ - "osfile=/home/user/uImage-XPedite5370\0" \ - "fdtfile=/home/user/xpedite5370.dtb\0" \ + "osfile=/home/user/board.uImage\0" \ + "fdtfile=/home/user/board.dtb\0" \ "ubootfile=/home/user/u-boot.bin\0" \ "fdtaddr=c00000\0" \ "osaddr=0x1000000\0" \ From b9b1bc8542db5f26453c45db843903dee7056244 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 22 Oct 2010 00:20:27 -0500 Subject: [PATCH 050/116] post/i2c: General clean up - Clean up ifdeffery - Update coding style No functional change should have occurred. Signed-off-by: Peter Tyser Acked-by: Heiko Schocher Acked-by: Wolfgang Denk Signed-off-by: Kumar Gala --- post/drivers/i2c.c | 48 ++++++++++++++++++++++------------------------ 1 file changed, 23 insertions(+), 25 deletions(-) diff --git a/post/drivers/i2c.c b/post/drivers/i2c.c index b152deaf6ab..84a603549d4 100644 --- a/post/drivers/i2c.c +++ b/post/drivers/i2c.c @@ -21,8 +21,6 @@ * MA 02111-1307 USA */ -#include - /* * I2C test * @@ -36,6 +34,7 @@ * #endif */ +#include #include #include @@ -44,42 +43,41 @@ int i2c_post_test (int flags) { unsigned int i; +#ifndef I2C_ADDR_LIST + for (i = 0; i < 128; i++) + if (i2c_probe (i) == 0) + return 0; + + /* No devices found */ + return -1; +#else unsigned int good = 0; -#ifdef I2C_ADDR_LIST unsigned int bad = 0; int j; unsigned char i2c_addr_list[] = I2C_ADDR_LIST; unsigned char i2c_miss_list[] = I2C_ADDR_LIST; -#endif for (i = 0; i < 128; i++) { - if (i2c_probe (i) == 0) { -#ifndef I2C_ADDR_LIST - good++; -#else /* I2C_ADDR_LIST */ - for (j=0; j 0 ? 0 : -1; -#else /* I2C_ADDR_LIST */ if (good != sizeof(i2c_addr_list)) { - for (j=0; j Date: Fri, 22 Oct 2010 00:20:28 -0500 Subject: [PATCH 051/116] post/i2c: Clean up detection logic The logic previously used in the I2C post was a bit convoluted. Signed-off-by: Peter Tyser Acked-by: Heiko Schocher Acked-by: Wolfgang Denk Signed-off-by: Kumar Gala --- post/drivers/i2c.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-) diff --git a/post/drivers/i2c.c b/post/drivers/i2c.c index 84a603549d4..0cbbf77bb37 100644 --- a/post/drivers/i2c.c +++ b/post/drivers/i2c.c @@ -51,38 +51,35 @@ int i2c_post_test (int flags) /* No devices found */ return -1; #else - unsigned int good = 0; - unsigned int bad = 0; + unsigned int ret = 0; int j; - unsigned char i2c_addr_list[] = I2C_ADDR_LIST; - unsigned char i2c_miss_list[] = I2C_ADDR_LIST; + const unsigned char i2c_addr_list[] = I2C_ADDR_LIST; for (i = 0; i < 128; i++) { if (i2c_probe(i) != 0) continue; + for (j = 0; j < sizeof(i2c_addr_list); ++j) { if (i == i2c_addr_list[j]) { - good++; - i2c_miss_list[j] = 0xFF; + i2c_addr_list[j] = 0xff; break; } } if (j == sizeof(i2c_addr_list)) { - bad++; - post_log("I2C: addr %02X not expected\n", i); + ret = -1; + post_log("I2C: addr %02x not expected\n", i); } } - if (good != sizeof(i2c_addr_list)) { - for (j = 0; j < sizeof(i2c_miss_list); ++j) { - if (i2c_miss_list[j] != 0xFF) { - post_log("I2C: addr %02X did not respond\n", - i2c_miss_list[j]); - } - } + for (i = 0; i < sizeof(i2c_addr_list); ++i) { + if (i2c_addr_list[i] == 0xff) + continue; + post_log("I2C: addr %02x did not respond\n", i2c_addr_list[i]); + ret = -1; } - return ((good == sizeof(i2c_addr_list)) && (bad == 0)) ? 0 : -1; + + return ret; #endif } From 9f949c9ac2c1bb5077a146753e24c7b3fe099991 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 22 Oct 2010 00:20:29 -0500 Subject: [PATCH 052/116] post/i2c: Don't probe address 0 According to the I2C specification device address 0 is the "general call address", ie a broadcast address. The I2C specification states that the format of a general call uses at least 2 bytes, which U-Boot's probing routine does not adhere to. Not probing device address 0 will prevent possible issues with devices that accept general calls. Additionally, this change shouldn't reduce POST coverage since each I2C device should still be accessed via its own, unique address. Signed-off-by: Peter Tyser Acked-by: Heiko Schocher Acked-by: Wolfgang Denk Signed-off-by: Kumar Gala --- post/drivers/i2c.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/post/drivers/i2c.c b/post/drivers/i2c.c index 0cbbf77bb37..35081776b3c 100644 --- a/post/drivers/i2c.c +++ b/post/drivers/i2c.c @@ -44,7 +44,8 @@ int i2c_post_test (int flags) { unsigned int i; #ifndef I2C_ADDR_LIST - for (i = 0; i < 128; i++) + /* Start at address 1, address 0 is the general call address */ + for (i = 1; i < 128; i++) if (i2c_probe (i) == 0) return 0; @@ -55,7 +56,8 @@ int i2c_post_test (int flags) int j; const unsigned char i2c_addr_list[] = I2C_ADDR_LIST; - for (i = 0; i < 128; i++) { + /* Start at address 1, address 0 is the general call address */ + for (i = 1; i < 128; i++) { if (i2c_probe(i) != 0) continue; From 60aaaa0782848062d0f499382035acc09eaff352 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 22 Oct 2010 00:20:30 -0500 Subject: [PATCH 053/116] post/i2c: Rename I2C_ADDR_LIST to CONFIG_SYS_POST_I2C_ADDRS Signed-off-by: Peter Tyser Acked-by: Heiko Schocher Acked-by: Wolfgang Denk Signed-off-by: Kumar Gala --- doc/README.POST | 11 ++++----- include/configs/KUP4K.h | 6 ++--- include/configs/KUP4X.h | 6 ++--- include/configs/TB5200.h | 8 +++---- include/configs/TQM5200.h | 8 +++---- include/configs/cm5200.h | 4 +++- include/configs/lwmon.h | 50 +++++++++++++++++++-------------------- include/configs/lwmon5.h | 15 ++++++------ include/configs/spieval.h | 8 +++---- post/drivers/i2c.c | 8 +++---- 10 files changed, 62 insertions(+), 62 deletions(-) diff --git a/doc/README.POST b/doc/README.POST index eeb218d39c6..695497e4bef 100644 --- a/doc/README.POST +++ b/doc/README.POST @@ -659,12 +659,11 @@ not need any modifications for porting them to another board/CPU. 2.2.2.1. I2C test For verifying the I2C bus, a full I2C bus scanning will be performed -using the i2c_probe() routine. If any I2C device is found, the test -will be considered as passed, otherwise failed. This particular way -will be used because it provides the most common method of testing. -For example, using the internal loopback mode of the CPM I2C -controller for testing would not work on boards where the software -I2C driver (also known as bit-banged driver) is used. +using the i2c_probe() routine. If a board defines +CONFIG_SYS_POST_I2C_ADDRS the I2C test will pass if all devices +listed in CONFIG_SYS_POST_I2C_ADDRS are found, and no additional +devices are detected. If CONFIG_SYS_POST_I2C_ADDRS is not defined +the test will pass if any I2C device is found. 2.2.2.2. Watchdog timer test diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index 9702d63eb81..c8e0ff287bc 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -139,9 +139,9 @@ /* List of I2C addresses to be verified by POST */ -#define I2C_ADDR_LIST {CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - } +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + } #define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */ diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index 9613ed9a824..ce731e387d8 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -149,9 +149,9 @@ /* List of I2C addresses to be verified by POST */ -#define I2C_ADDR_LIST {CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - } +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + } #define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index ad86e2e23a3..f336e8d0bc3 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -251,10 +251,10 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 /* List of I2C addresses to be verified by POST */ -#undef I2C_ADDR_LIST -#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_SLAVE } +#undef CONFIG_SYS_POST_I2C_ADDRS +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_SLAVE} /* * Flash configuration diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 2612c7a50ba..794e11b024d 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -370,10 +370,10 @@ /* List of I2C addresses to be verified by POST */ #if defined (CONFIG_MINIFAP) -#undef I2C_ADDR_LIST -#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_HWMON_ADDR, \ - CONFIG_SYS_I2C_SLAVE } +#undef CONFIG_SYS_POST_I2C_ADDRS +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_HWMON_ADDR, \ + CONFIG_SYS_I2C_SLAVE} #endif /* diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 1b129a2e667..af6769b18d5 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -80,7 +80,9 @@ #define CONFIG_POST (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU | CONFIG_SYS_POST_I2C) #define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) /* List of I2C addresses to be verified by POST */ -#define I2C_ADDR_LIST { CONFIG_SYS_I2C_SLAVE, CONFIG_SYS_I2C_IO, CONFIG_SYS_I2C_EEPROM } +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_SLAVE, \ + CONFIG_SYS_I2C_IO, \ + CONFIG_SYS_I2C_EEPROM} /* display image timestamps */ #define CONFIG_TIMESTAMP 1 diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index 1062765f036..9e48857308b 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -349,32 +349,32 @@ /* List of I2C addresses to be verified by POST */ #ifdef CONFIG_USE_FRAM -#define I2C_ADDR_LIST { /* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ - CONFIG_SYS_I2C_SYSMON_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_POWER_A_ADDR, \ - CONFIG_SYS_I2C_POWER_B_ADDR, \ - CONFIG_SYS_I2C_KEYBD_ADDR, \ - CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_EEPROM_ADDR, \ - } +#define CONFIG_SYS_POST_I2C_ADDRS {/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ + CONFIG_SYS_I2C_SYSMON_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_POWER_A_ADDR, \ + CONFIG_SYS_I2C_POWER_B_ADDR, \ + CONFIG_SYS_I2C_KEYBD_ADDR, \ + CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR, \ + } #else /* Use EEPROM - which show up on 8 consequtive addresses */ -#define I2C_ADDR_LIST { /* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ - CONFIG_SYS_I2C_SYSMON_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_POWER_A_ADDR, \ - CONFIG_SYS_I2C_POWER_B_ADDR, \ - CONFIG_SYS_I2C_KEYBD_ADDR, \ - CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_EEPROM_ADDR+0, \ - CONFIG_SYS_I2C_EEPROM_ADDR+1, \ - CONFIG_SYS_I2C_EEPROM_ADDR+2, \ - CONFIG_SYS_I2C_EEPROM_ADDR+3, \ - CONFIG_SYS_I2C_EEPROM_ADDR+4, \ - CONFIG_SYS_I2C_EEPROM_ADDR+5, \ - CONFIG_SYS_I2C_EEPROM_ADDR+6, \ - CONFIG_SYS_I2C_EEPROM_ADDR+7, \ - } +#define CONFIG_SYS_POST_I2C_ADDRS {/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ + CONFIG_SYS_I2C_SYSMON_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_POWER_A_ADDR, \ + CONFIG_SYS_I2C_POWER_B_ADDR, \ + CONFIG_SYS_I2C_KEYBD_ADDR, \ + CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR+0, \ + CONFIG_SYS_I2C_EEPROM_ADDR+1, \ + CONFIG_SYS_I2C_EEPROM_ADDR+2, \ + CONFIG_SYS_I2C_EEPROM_ADDR+3, \ + CONFIG_SYS_I2C_EEPROM_ADDR+4, \ + CONFIG_SYS_I2C_EEPROM_ADDR+5, \ + CONFIG_SYS_I2C_EEPROM_ADDR+6, \ + CONFIG_SYS_I2C_EEPROM_ADDR+7, \ + } #endif /* CONFIG_USE_FRAM */ /*----------------------------------------------------------------------- diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index a4e92cce3b7..63e22d400c0 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -306,14 +306,13 @@ #define CONFIG_SYS_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */ #define CONFIG_SYS_I2C_DSPIC_IO_ADDR 0x57 /* PIC I/O addr */ -#define I2C_ADDR_LIST { \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_EEPROM_CPU_ADDR, \ - CONFIG_SYS_I2C_EEPROM_MB_ADDR, \ - CONFIG_SYS_I2C_DSPIC_ADDR, \ - CONFIG_SYS_I2C_DSPIC_2_ADDR, \ - CONFIG_SYS_I2C_DSPIC_KEYB_ADDR, \ - CONFIG_SYS_I2C_DSPIC_IO_ADDR } +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_EEPROM_CPU_ADDR,\ + CONFIG_SYS_I2C_EEPROM_MB_ADDR, \ + CONFIG_SYS_I2C_DSPIC_ADDR, \ + CONFIG_SYS_I2C_DSPIC_2_ADDR, \ + CONFIG_SYS_I2C_DSPIC_KEYB_ADDR,\ + CONFIG_SYS_I2C_DSPIC_IO_ADDR } /* * Pass open firmware flat tree diff --git a/include/configs/spieval.h b/include/configs/spieval.h index b5ac1689b88..880c8a30575 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -271,10 +271,10 @@ /* List of I2C addresses to be verified by POST */ #if defined (CONFIG_MINIFAP) -#undef I2C_ADDR_LIST -#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_HWMON_ADDR, \ - CONFIG_SYS_I2C_SLAVE } +#undef CONFIG_SYS_POST_I2C_ADDRS +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_HWMON_ADDR, \ + CONFIG_SYS_I2C_SLAVE} #endif /* diff --git a/post/drivers/i2c.c b/post/drivers/i2c.c index 35081776b3c..e6f4c6a1f21 100644 --- a/post/drivers/i2c.c +++ b/post/drivers/i2c.c @@ -26,10 +26,10 @@ * * For verifying the I2C bus, a full I2C bus scanning is performed. * - * #ifdef I2C_ADDR_LIST + * #ifdef CONFIG_SYS_POST_I2C_ADDRS * The test is considered as passed if all the devices and * only the devices in the list are found. - * #else [ ! I2C_ADDR_LIST ] + * #else [ ! CONFIG_SYS_POST_I2C_ADDRS ] * The test is considered as passed if any I2C device is found. * #endif */ @@ -43,7 +43,7 @@ int i2c_post_test (int flags) { unsigned int i; -#ifndef I2C_ADDR_LIST +#ifndef CONFIG_SYS_POST_I2C_ADDRS /* Start at address 1, address 0 is the general call address */ for (i = 1; i < 128; i++) if (i2c_probe (i) == 0) @@ -54,7 +54,7 @@ int i2c_post_test (int flags) #else unsigned int ret = 0; int j; - const unsigned char i2c_addr_list[] = I2C_ADDR_LIST; + const unsigned char i2c_addr_list[] = CONFIG_SYS_POST_I2C_ADDRS; /* Start at address 1, address 0 is the general call address */ for (i = 1; i < 128; i++) { From 9d921f19b3f981a499f49a57e2c3ace7be5aeecc Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 22 Oct 2010 00:20:31 -0500 Subject: [PATCH 054/116] post/i2c: Add ability to ignore I2C devices Add the ability to not report an I2C POST error for a set of given I2C addresses on bootup. This is useful for cases when a device may or may not be present, and neither case is considered an error. For example: - Some form factors such as XMC and Compact PCI Express have an I2C EEPROM whose address changes based on geographical address. Eg installed in one slot its EEPROM address is, 0x50, in another its 0x51, etc. This allows multiple devices to have their EEPROMs present on the same I2C bus. Thus the I2C devices present for an XMC or CPCIe card depend on if and where other cards are installed in the same system. - Some cards have optional I2C devices. Eg one hardware build configuration has different I2C devices than another and software can't determine if the optional device should be present or not. - Some cards have optional daughtercards with I2C devices on them. - I2C EEPROMs address range depends on their size. Its possible to support differently size EEPROMs by only probing the EEPROM's base address and ignoring the other addresses that are impacted by its size. A new CONFIG_SYS_POST_I2C_IGNORES define has been added which specifies a list of I2C addresses for the I2C POST to ignore. Signed-off-by: Peter Tyser Acked-by: Heiko Schocher Acked-by: Wolfgang Denk Signed-off-by: Kumar Gala --- doc/README.POST | 8 ++++++++ post/drivers/i2c.c | 26 ++++++++++++++++++++++++-- 2 files changed, 32 insertions(+), 2 deletions(-) diff --git a/doc/README.POST b/doc/README.POST index 695497e4bef..6815d491cf4 100644 --- a/doc/README.POST +++ b/doc/README.POST @@ -665,6 +665,14 @@ listed in CONFIG_SYS_POST_I2C_ADDRS are found, and no additional devices are detected. If CONFIG_SYS_POST_I2C_ADDRS is not defined the test will pass if any I2C device is found. +The CONFIG_SYS_POST_I2C_IGNORES define can be used to list I2C +devices which may or may not be present when using +CONFIG_SYS_POST_I2C_ADDRS. The I2C POST test will pass regardless +if the devices in CONFIG_SYS_POST_I2C_IGNORES are found or not. +This is useful in cases when I2C devices are optional (eg on a +daughtercard that may or may not be present) or not critical +to board operation. + 2.2.2.2. Watchdog timer test To test the watchdog timer the scheme mentioned above (refer to diff --git a/post/drivers/i2c.c b/post/drivers/i2c.c index e6f4c6a1f21..3080e81b5bf 100644 --- a/post/drivers/i2c.c +++ b/post/drivers/i2c.c @@ -27,8 +27,12 @@ * For verifying the I2C bus, a full I2C bus scanning is performed. * * #ifdef CONFIG_SYS_POST_I2C_ADDRS - * The test is considered as passed if all the devices and - * only the devices in the list are found. + * The test is considered as passed if all the devices and only the devices + * in the list are found. + * #ifdef CONFIG_SYS_POST_I2C_IGNORES + * Ignore devices listed in CONFIG_SYS_POST_I2C_IGNORES. These devices + * are optional or not vital to board functionality. + * #endif * #else [ ! CONFIG_SYS_POST_I2C_ADDRS ] * The test is considered as passed if any I2C device is found. * #endif @@ -40,12 +44,28 @@ #if CONFIG_POST & CONFIG_SYS_POST_I2C +static int i2c_ignore_device(unsigned int chip) +{ +#ifdef CONFIG_SYS_POST_I2C_IGNORES + const unsigned char i2c_ignore_list[] = CONFIG_SYS_POST_I2C_IGNORES; + int i; + + for (i = 0; i < sizeof(i2c_ignore_list); i++) + if (i2c_ignore_list[i] == chip) + return 1; +#endif + + return 0; +} + int i2c_post_test (int flags) { unsigned int i; #ifndef CONFIG_SYS_POST_I2C_ADDRS /* Start at address 1, address 0 is the general call address */ for (i = 1; i < 128; i++) + if (i2c_ignore_device(i)) + continue; if (i2c_probe (i) == 0) return 0; @@ -58,6 +78,8 @@ int i2c_post_test (int flags) /* Start at address 1, address 0 is the general call address */ for (i = 1; i < 128; i++) { + if (i2c_ignore_device(i)) + continue; if (i2c_probe(i) != 0) continue; From 65f23519d65f56a3a894fcf4d748e5e96ef7166d Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 22 Oct 2010 00:20:32 -0500 Subject: [PATCH 055/116] mpc86xx: Add generic POST word read/write support The PIC's TFRR register doesn't affect hardware and is generally unused, so use as storage for the POST word. Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- include/post.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/post.h b/include/post.h index daa9047118e..abe47da53bf 100644 --- a/include/post.h +++ b/include/post.h @@ -60,6 +60,10 @@ #include #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr)) +#elif defined (CONFIG_MPC86xx) +#include +#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr)) + #elif defined (CONFIG_4xx) #define _POST_WORD_ADDR \ (CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 0x4) From 66a8b440af02397ffb3f850e9195c50fb5d37da6 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 22 Oct 2010 00:20:33 -0500 Subject: [PATCH 056/116] xes: Add POST support for 8xxx boards Add memory and I2C posts to the XPedite517x/520x/537x board families. Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- include/configs/xpedite517x.h | 17 +++++++++++++++++ include/configs/xpedite520x.h | 10 ++++++++++ include/configs/xpedite537x.h | 15 +++++++++++++++ 3 files changed, 42 insertions(+) diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 2b6e895ec84..8df9edd0edf 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -108,6 +108,21 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x20000000 +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY |\ + CONFIG_SYS_POST_I2C) +#define I2C_ADDR_LIST {CONFIG_SYS_I2C_DS1621_ADDR, \ + CONFIG_SYS_I2C_DS4510_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_LM90_ADDR, \ + CONFIG_SYS_I2C_PCA9553_ADDR, \ + CONFIG_SYS_I2C_PCA953X_ADDR0, \ + CONFIG_SYS_I2C_PCA953X_ADDR1, \ + CONFIG_SYS_I2C_PCA953X_ADDR2, \ + CONFIG_SYS_I2C_PCA953X_ADDR3, \ + CONFIG_SYS_I2C_PEX8518_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR} +/* The XPedite5170 can host an XMC which has an EEPROM at address 0x50 */ +#define I2C_ADDR_IGNORE_LIST {0x50} /* * Memory map @@ -259,6 +274,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_I2C_DS1621_ADDR 0x48 #define CONFIG_DTT_DS1621 #define CONFIG_DTT_SENSORS { 0 } +#define CONFIG_SYS_I2C_LM90_ADDR 0x4c /* I2C EEPROM - AT24C128B */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 @@ -282,6 +298,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_I2C_PCA953X_ADDR2 0x1e #define CONFIG_SYS_I2C_PCA953X_ADDR3 0x1f #define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0 +#define CONFIG_SYS_I2C_PCA9553_ADDR 0x62 /* * PU = pulled high, PD = pulled low diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index fc15d8e83e2..2f313371c54 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -93,6 +93,13 @@ #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x20000000 +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ + CONFIG_SYS_POST_I2C) +#define I2C_ADDR_LIST {CONFIG_SYS_I2C_MAX1237_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_PCA953X_ADDR0, \ + CONFIG_SYS_I2C_PCA953X_ADDR1, \ + CONFIG_SYS_I2C_RTC_ADDR} /* * Memory map @@ -265,6 +272,9 @@ #define CONFIG_SYS_PCA953X_P14_IO6 0x40 #define CONFIG_SYS_PCA953X_P14_IO7 0x80 +/* 12-bit ADC used to measure CPU diode */ +#define CONFIG_SYS_I2C_MAX1237_ADDR 0x34 + /* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index 309e32c568e..e7de13a7ccb 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -111,6 +111,20 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x20000000 +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ + CONFIG_SYS_POST_I2C) +#define I2C_ADDR_LIST {CONFIG_SYS_I2C_DS1621_ADDR, \ + CONFIG_SYS_I2C_DS4510_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_LM90_ADDR, \ + CONFIG_SYS_I2C_PCA953X_ADDR0, \ + CONFIG_SYS_I2C_PCA953X_ADDR1, \ + CONFIG_SYS_I2C_PCA953X_ADDR2, \ + CONFIG_SYS_I2C_PCA953X_ADDR3, \ + CONFIG_SYS_I2C_PEX8518_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR} +/* The XPedite5370 can host an XMC which has an EEPROM at address 0x50 */ +#define I2C_ADDR_IGNORE_LIST {0x50} /* * Memory map @@ -266,6 +280,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_I2C_DS1621_ADDR 0x48 #define CONFIG_DTT_DS1621 #define CONFIG_DTT_SENSORS { 0 } +#define CONFIG_SYS_I2C_LM90_ADDR 0x4c /* I2C EEPROM - AT24C128B */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 From bfe18815e8123f4456be8b5858b2b255d7881698 Mon Sep 17 00:00:00 2001 From: John Schmoller Date: Fri, 22 Oct 2010 00:20:34 -0500 Subject: [PATCH 057/116] XPedite5500 board support Initial support for Extreme Engineering Solutions XPedite5500 - a P2020-based PMC/XMC single board computer. Signed-off-by: John Schmoller Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- MAINTAINERS | 1 + board/xes/common/Makefile | 2 + board/xes/common/fsl_8xxx_clk.c | 11 + board/xes/xpedite550x/Makefile | 39 ++ board/xes/xpedite550x/ddr.c | 165 ++++++++ board/xes/xpedite550x/law.c | 54 +++ board/xes/xpedite550x/tlb.c | 98 +++++ board/xes/xpedite550x/xpedite550x.c | 107 +++++ boards.cfg | 1 + include/configs/xpedite550x.h | 607 ++++++++++++++++++++++++++++ 10 files changed, 1085 insertions(+) create mode 100644 board/xes/xpedite550x/Makefile create mode 100644 board/xes/xpedite550x/ddr.c create mode 100644 board/xes/xpedite550x/law.c create mode 100644 board/xes/xpedite550x/tlb.c create mode 100644 board/xes/xpedite550x/xpedite550x.c create mode 100644 include/configs/xpedite550x.h diff --git a/MAINTAINERS b/MAINTAINERS index 2da05611ad9..b0da631fe19 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -466,6 +466,7 @@ Peter Tyser xpedite5170 MPC8640 xpedite5200 MPC8548 xpedite5370 MPC8572 + xpedite5500 P2020 David Updegraff diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile index bfade319b9c..16e0b66218a 100644 --- a/board/xes/common/Makefile +++ b/board/xes/common/Makefile @@ -32,7 +32,9 @@ LIB = $(obj)lib$(VENDOR).a COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o COBJS-$(CONFIG_MPC8572) += fsl_8xxx_clk.o COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o +COBJS-$(CONFIG_P2020) += fsl_8xxx_clk.o COBJS-$(CONFIG_FSL_DDR2) += fsl_8xxx_ddr.o +COBJS-$(CONFIG_FSL_DDR3) += fsl_8xxx_ddr.o COBJS-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_misc.o board.o COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o diff --git a/board/xes/common/fsl_8xxx_clk.c b/board/xes/common/fsl_8xxx_clk.c index f4a17b78c60..20d0a308b9a 100644 --- a/board/xes/common/fsl_8xxx_clk.c +++ b/board/xes/common/fsl_8xxx_clk.c @@ -38,7 +38,11 @@ unsigned long get_board_sys_clk(ulong dummy) if (in_be32(&gur->gpporcr) & 0x10000) return 66666666; else +#ifdef CONFIG_P2020 + return 100000000; +#else return 50000000; +#endif } #ifdef CONFIG_MPC85xx @@ -54,6 +58,13 @@ unsigned long get_board_ddr_clk(ulong dummy) if (ddr_ratio == 0x7) return get_board_sys_clk(dummy); +#ifdef CONFIG_P2020 + if (in_be32(&gur->gpporcr) & 0x20000) + return 66666666; + else + return 100000000; +#else return 66666666; +#endif } #endif diff --git a/board/xes/xpedite550x/Makefile b/board/xes/xpedite550x/Makefile new file mode 100644 index 00000000000..8980a4b3f6a --- /dev/null +++ b/board/xes/xpedite550x/Makefile @@ -0,0 +1,39 @@ +# +# Copyright 2007-2008 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c new file mode 100644 index 00000000000..718cd989bbf --- /dev/null +++ b/board/xes/xpedite550x/ddr.c @@ -0,0 +1,165 @@ +/* + * Copyright 2010 Extreme Engineering Solutions, Inc. + * Copyright 2007-2008 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address) +{ + i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd, + sizeof(ddr3_spd_eeprom_t)); +} + +void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ + unsigned int i; + unsigned int i2c_address = 0; + + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + if (ctrl_num == 0 && i == 0) + i2c_address = SPD_EEPROM_ADDRESS1; + get_spd(&(ctrl_dimms_spd[i]), i2c_address); + } +} + +unsigned int fsl_ddr_get_mem_data_rate(void) +{ + return get_ddr_freq(0); +} + +/* + * There are traditionally three board-specific SDRAM timing parameters + * which must be calculated based on the particular PCB artwork. These are: + * 1.) CPO (Read Capture Delay) + * - TIMING_CFG_2 register + * Source: Calculation based on board trace lengths and + * chip-specific internal delays. + * 2.) CLK_ADJUST (Clock and Addr/Cmd alignment control) + * - DDR_SDRAM_CLK_CNTL register + * Source: Signal Integrity Simulations + * 3.) 2T Timing on Addr/Ctl + * - TIMING_CFG_2 register + * Source: Signal Integrity Simulations + * Usually only needed with heavy load/very high speed (>DDR2-800) + * + * ====== XPedite550x DDR3-800 read delay calculations ====== + * + * The P2020 processor provides an autoleveling option. Setting CPO to + * 0x1f enables this auto configuration. + */ + +typedef struct { + unsigned short datarate_mhz_low; + unsigned short datarate_mhz_high; + unsigned char clk_adjust; + unsigned char cpo; +} board_specific_parameters_t; + +const board_specific_parameters_t board_specific_parameters[][20] = { + { + /* Controller 0 */ + { + /* DDR3-600/667 */ + .datarate_mhz_low = 500, + .datarate_mhz_high = 750, + .clk_adjust = 5, + .cpo = 31, + }, + { + /* DDR3-800 */ + .datarate_mhz_low = 750, + .datarate_mhz_high = 850, + .clk_adjust = 5, + .cpo = 31, + }, + }, +}; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const board_specific_parameters_t *pbsp = + &(board_specific_parameters[ctrl_num][0]); + u32 num_params = sizeof(board_specific_parameters[ctrl_num]) / + sizeof(board_specific_parameters[0][0]); + u32 i; + ulong ddr_freq; + + /* + * Set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in + * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If + * there are two dimms in the controller, set odt_rd_cfg to 3 and + * odt_wr_cfg to 3 for the even CS, 0 for the odd CS. + */ + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (i&1) { /* odd CS */ + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 0; + } else { /* even CS */ + if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) { + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 4; + } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) { + popts->cs_local_opts[i].odt_rd_cfg = 3; + popts->cs_local_opts[i].odt_wr_cfg = 3; + } + } + } + + /* + * Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + + for (i = 0; i < num_params; i++) { + if (ddr_freq >= pbsp->datarate_mhz_low && + ddr_freq <= pbsp->datarate_mhz_high) { + popts->clk_adjust = pbsp->clk_adjust; + popts->cpo_override = pbsp->cpo; + popts->twoT_en = 0; + } + pbsp++; + } + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + + /* + * Enable on-die termination. + * From the Micron Technical Node TN-41-04, RTT_Nom should typically + * be 30 to 40 ohms, while RTT_WR should be 120 ohms. Setting RTT_WR + * is handled in the Freescale DDR3 driver. Set RTT_Nom here. + */ + popts->rtt_override = 1; + popts->rtt_override_value = 3; +} + diff --git a/board/xes/xpedite550x/law.c b/board/xes/xpedite550x/law.c new file mode 100644 index 00000000000..4d4445d3108 --- /dev/null +++ b/board/xes/xpedite550x/law.c @@ -0,0 +1,54 @@ +/* + * Copyright 2010 Extreme Engineering Solutions, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* + * Notes: + * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + */ + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC), +#ifdef CONFIG_SYS_PCIE1_MEM_PHYS + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1), +#endif +#ifdef CONFIG_SYS_PCIE2_MEM_PHYS + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_2), +#endif +#ifdef CONFIG_SYS_PCIE3_MEM_PHYS + SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_3), + SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_3), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/xes/xpedite550x/tlb.c b/board/xes/xpedite550x/tlb.c new file mode 100644 index 00000000000..cf3ff4d45f8 --- /dev/null +++ b/board/xes/xpedite550x/tlb.c @@ -0,0 +1,98 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* W**G* - NOR flashes */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE2, CONFIG_SYS_FLASH_BASE2, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, + 0, 0, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1M, 1), + + /* *I*G* - NAND flash */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_1M, 1), + + /* **M** - Boot page for secondary processors */ + SET_TLB_ENTRY(1, CONFIG_BPTR_VIRT_ADDR, CONFIG_BPTR_VIRT_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, + 0, 3, BOOKE_PAGESZ_4K, 1), + +#ifdef CONFIG_PCIE1 + /* *I*G* - PCIe */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_1G, 1), +#endif + +#ifdef CONFIG_PCIE2 + /* *I*G* - PCIe */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), +#endif + +#ifdef CONFIG_PCIE3 + /* *I*G* - PCIe */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256M, 1), +#endif + +#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3) + /* *I*G* - PCIe */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_64M, 1), +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/xes/xpedite550x/xpedite550x.c b/board/xes/xpedite550x/xpedite550x.c new file mode 100644 index 00000000000..2ad30a30f90 --- /dev/null +++ b/board/xes/xpedite550x/xpedite550x.c @@ -0,0 +1,107 @@ +/* + * Copyright 2010 Extreme Engineering Solutions, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +extern void ft_board_pci_setup(void *blob, bd_t *bd); + +static void flash_cs_fixup(void) +{ + int flash_sel; + + /* + * Print boot dev and swap flash flash chip selects if booted from 2nd + * flash. Swapping chip selects presents user with a common memory + * map regardless of which flash was booted from. + */ + flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) & + CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS)); + printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1); + + if (flash_sel) { + set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); + + set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); + } +} + +int board_early_init_r(void) +{ + /* Initialize PCA9557 devices */ + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0); + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0); + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR2, 0xff, 0); + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR3, 0xff, 0); + + /* + * Remap NOR flash region to caching-inhibited + * so that flash can be erased/programmed properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* Invalidate existing TLB entry for NOR flash */ + disable_tlb(0); + set_tlb(1, (CONFIG_SYS_FLASH_BASE2 & 0xf0000000), + (CONFIG_SYS_FLASH_BASE2 & 0xf0000000), + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_256M, 1); + + flash_cs_fixup(); + + return 0; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#ifdef CONFIG_PCI + ft_board_pci_setup(blob, bd); +#endif + ft_cpu_setup(blob, bd); +} +#endif + +#ifdef CONFIG_MP +extern void cpu_mp_lmb_reserve(struct lmb *lmb); + +void board_lmb_reserve(struct lmb *lmb) +{ + cpu_mp_lmb_reserve(lmb); +} +#endif diff --git a/boards.cfg b/boards.cfg index a524272404a..e8afdb13be3 100644 --- a/boards.cfg +++ b/boards.cfg @@ -558,6 +558,7 @@ MPC8560ADS powerpc mpc85xx mpc8560ads freescale MPC8568MDS powerpc mpc85xx mpc8568mds freescale xpedite520x powerpc mpc85xx - xes xpedite537x powerpc mpc85xx - xes +xpedite550x powerpc mpc85xx - xes sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540 sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540 sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33 diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h new file mode 100644 index 00000000000..a849cf93635 --- /dev/null +++ b/include/configs/xpedite550x.h @@ -0,0 +1,607 @@ +/* + * Copyright 2010 Extreme Engineering Solutions, Inc. + * Copyright 2007-2008 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * xpedite550x board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_BOOKE 1 /* BOOKE */ +#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ +#define CONFIG_P2020 1 +#define CONFIG_XPEDITE550X 1 +#define CONFIG_SYS_BOARD_NAME "XPedite5500" +#define CONFIG_SYS_FORM_PMC_XMC 1 +#define CONFIG_PRPMC_PCI_ALIAS "pci0" /* Processor PMC interface on pci0 */ +#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xfff80000 +#endif + +#define CONFIG_PCI 1 /* Enable PCI/PCIE */ +#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ +#define CONFIG_PCIE1 1 /* PCIE controler 1 (PEX8112 or XMC) */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ +#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ +#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ +#define CONFIG_FSL_ELBC 1 + +/* + * Multicore config + */ +#define CONFIG_MP +#define CONFIG_BPTR_VIRT_ADDR 0xee000000 /* virt boot page address */ +#define CONFIG_MPC8xxx_DISABLE_BPTR /* Don't leave BPTR enabled */ + +/* + * DDR config + */ +#define CONFIG_FSL_DDR3 +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#define CONFIG_DDR_SPD +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#define SPD_EEPROM_ADDRESS1 0x54 +#define SPD_EEPROM_OFFSET 0x200 /* OFFSET of SPD in EEPROM */ +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 2 +#define CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_VERY_BIG_RAM + +#ifndef __ASSEMBLY__ +extern unsigned long get_board_sys_clk(unsigned long dummy); +extern unsigned long get_board_ddr_clk(unsigned long dummy); +#endif + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) /* ddrclk for MPC85xx */ + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_ENABLE_36BIT_PHYS 1 + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */ +#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ +#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ + +/* + * Diagnostics + */ +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x20000000 +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ + CONFIG_SYS_POST_I2C) +#define I2C_ADDR_LIST {CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_LM75_ADDR, \ + CONFIG_SYS_I2C_LM90_ADDR, \ + CONFIG_SYS_I2C_PCA953X_ADDR0, \ + CONFIG_SYS_I2C_PCA953X_ADDR2, \ + CONFIG_SYS_I2C_PCA953X_ADDR3, \ + CONFIG_SYS_I2C_RTC_ADDR} + +/* + * Memory map + * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable + * 0x8000_0000 0xbfff_ffff PCIe1 Mem 1G non-cacheable + * 0xe000_0000 0xe7ff_ffff SRAM/SSRAM/L1 Cache 128M non-cacheable + * 0xe800_0000 0xe87f_ffff PCIe1 IO 8M non-cacheable + * 0xee00_0000 0xee00_ffff Boot page translation 4K non-cacheable + * 0xef00_0000 0xef0f_ffff CCSR/IMMR 1M non-cacheable + * 0xef80_0000 0xef8f_ffff NAND Flash 1M non-cacheable + * 0xf000_0000 0xf7ff_ffff NOR Flash 2 128M non-cacheable + * 0xf800_0000 0xffff_ffff NOR Flash 1 128M non-cacheable + */ + +#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_8 | LCRR_EADC_3) + +/* + * NAND flash configuration + */ +#define CONFIG_SYS_NAND_BASE 0xef800000 +#define CONFIG_SYS_NAND_BASE2 0xef840000 /* Unused at this time */ +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ + CONFIG_SYS_NAND_BASE2} +#define CONFIG_SYS_MAX_NAND_DEVICE 2 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */ +#define CONFIG_NAND_FSL_ELBC + +/* + * NOR flash configuration + */ +#define CONFIG_SYS_FLASH_BASE 0xf8000000 +#define CONFIG_SYS_FLASH_BASE2 0xf0000000 +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2} +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \ + {0xf7f40000, 0xc0000} } +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ + +/* + * Chip select configuration + */ +/* NOR Flash 0 on CS0 */ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ + BR_PS_16 | \ + BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_128MB | \ + OR_GPCM_CSNT | \ + OR_GPCM_XACS | \ + OR_GPCM_ACS_DIV2 | \ + OR_GPCM_SCY_8 | \ + OR_GPCM_TRLX | \ + OR_GPCM_EHTR | \ + OR_GPCM_EAD) + +/* NOR Flash 1 on CS1 */ +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE2 | \ + BR_PS_16 | \ + BR_V) +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM + +/* NAND flash on CS2 */ +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_NAND_BASE | \ + (2< " + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 +#define CONFIG_FDT_FIXUP_PCI_IRQ 1 + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 +#define CONFIG_I2C_MULTI_BUS + +/* I2C DS7505 temperature sensor */ +#define CONFIG_DTT_LM75 +#define CONFIG_DTT_SENSORS { 0 } +#define CONFIG_SYS_I2C_LM75_ADDR 0x48 + +/* I2C ADT7461 temperature sensor */ +#define CONFIG_SYS_I2C_LM90_ADDR 0x4C + +/* I2C EEPROM - AT24C128B */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */ + +/* I2C RTC */ +#define CONFIG_RTC_M41T11 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_M41T11_BASE_YEAR 2000 + +/* GPIO */ +#define CONFIG_PCA953X +#define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18 +#define CONFIG_SYS_I2C_PCA953X_ADDR1 0x1c +#define CONFIG_SYS_I2C_PCA953X_ADDR2 0x1e +#define CONFIG_SYS_I2C_PCA953X_ADDR3 0x1f +#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0 + +/* + * GPIO pin definitions, PU = pulled high, PD = pulled low + */ +/* PCA9557 @ 0x18*/ +#define CONFIG_SYS_PCA953X_C0_SER0_EN 0x01 /* PU; UART0 enable (1: enabled) */ +#define CONFIG_SYS_PCA953X_C0_SER0_MODE 0x02 /* PU; UART0 serial mode select (1: RS-485, 0: RS-232) */ +#define CONFIG_SYS_PCA953X_C0_SER1_EN 0x04 /* PU; UART1 enable (1: enabled) */ +#define CONFIG_SYS_PCA953X_C0_SER1_MODE 0x08 /* PU; UART1 serial mode select (1: RS-485, 0: RS-232) */ +#define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS 0x10 /* PU; Boot flash CS select */ +#define CONFIG_SYS_PCA953X_NVM_WP 0x20 /* PU; Write protection (0: disabled, 1: enabled) */ + +/* PCA9557 @ 0x1e*/ +#define CONFIG_SYS_PCA953X_XMC_GA0 0x01 /* PU; */ +#define CONFIG_SYS_PCA953X_XMC_GA1 0x02 /* PU; */ +#define CONFIG_SYS_PCA953X_XMC_GA2 0x04 /* PU; */ +#define CONFIG_SYS_PCA953X_XMC_WAKE 0x10 /* PU; */ +#define CONFIG_SYS_PCA953X_XMC_BIST 0x20 /* Enable XMC BIST */ +#define CONFIG_SYS_PCA953X_PMC_EREADY 0x40 /* PU; PMC PCI eready */ +#define CONFIG_SYS_PCA953X_PMC_MONARCH 0x80 /* PMC monarch mode enable */ + +/* PCA9557 @ 0x1f */ +#define CONFIG_SYS_PCA953X_MC_GPIO0 0x01 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO1 0x02 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO2 0x04 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO3 0x08 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO4 0x10 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO5 0x20 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO6 0x40 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO7 0x80 /* PU; */ + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1 - PEX8112 or XMC, depending on build option */ +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */ +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ + + +/* + * Networking options + */ +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_TSEC_TBI +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ +#define CONFIG_ETHPRIME "eTSEC2" + +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC1_PHY_ADDR 1 +#define TSEC1_PHYIDX 0 +#define CONFIG_HAS_ETH0 + +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_PHY_ADDR 2 +#define TSEC2_PHYIDX 0 +#define CONFIG_HAS_ETH1 + +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_PHY_ADDR 3 +#define TSEC3_PHYIDX 0 +#define CONFIG_HAS_ETH2 + +/* + * USB + */ +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_DOS_PARTITION + +/* + * Command configuration. + */ +#include + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCA953X +#define CONFIG_CMD_PCA953X_INFO +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PCI_ENUM +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ +#define CONFIG_PANIC_HANG /* do not reset board on panic */ +#define CONFIG_PREBOOT /* enable preboot variable */ +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 +#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ + +/* + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Environment Configuration + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */ +#define CONFIG_ENV_SIZE 0x8000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - (256 * 1024)) + +/* + * Flash memory map: + * fff80000 - ffffffff Pri U-Boot (512 KB) + * fff40000 - fff7ffff Pri U-Boot Environment (256 KB) + * fff00000 - fff3ffff Pri FDT (256KB) + * fef00000 - ffefffff Pri OS image (16MB) + * f8000000 - feefffff Pri OS Use/Filesystem (111MB) + * + * f7f80000 - f7ffffff Sec U-Boot (512 KB) + * f7f40000 - f7f7ffff Sec U-Boot Environment (256 KB) + * f7f00000 - f7f3ffff Sec FDT (256KB) + * f6f00000 - f7efffff Sec OS image (16MB) + * f0000000 - f6efffff Sec OS Use/Filesystem (111MB) + */ +#define CONFIG_UBOOT1_ENV_ADDR MK_STR(0xfff80000) +#define CONFIG_UBOOT2_ENV_ADDR MK_STR(0xf7f80000) +#define CONFIG_FDT1_ENV_ADDR MK_STR(0xfff00000) +#define CONFIG_FDT2_ENV_ADDR MK_STR(0xf7f00000) +#define CONFIG_OS1_ENV_ADDR MK_STR(0xfef00000) +#define CONFIG_OS2_ENV_ADDR MK_STR(0xf6f00000) + +#define CONFIG_PROG_UBOOT1 \ + "$download_cmd $loadaddr $ubootfile; " \ + "if test $? -eq 0; then " \ + "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; " \ + "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; " \ + "if test $? -ne 0; then " \ + "echo PROGRAM FAILED; " \ + "else; " \ + "echo PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_UBOOT2 \ + "$download_cmd $loadaddr $ubootfile; " \ + "if test $? -eq 0; then " \ + "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; " \ + "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; " \ + "if test $? -ne 0; then " \ + "echo PROGRAM FAILED; " \ + "else; " \ + "echo PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_BOOT_OS_NET \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "if test -n $fdtaddr; then " \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "bootm $osaddr - $fdtaddr; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi; " \ + "else; " \ + "bootm $osaddr; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_OS1 \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_OS1_ENV_ADDR" +$filesize; " \ + "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ + "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo OS PROGRAM FAILED; " \ + "else; " \ + "echo OS PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_OS2 \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_OS2_ENV_ADDR" +$filesize; " \ + "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ + "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo OS PROGRAM FAILED; " \ + "else; " \ + "echo OS PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_FDT1 \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;" \ + "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ + "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo FDT PROGRAM FAILED; " \ + "else; " \ + "echo FDT PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_FDT2 \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;" \ + "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ + "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo FDT PROGRAM FAILED; " \ + "else; " \ + "echo FDT PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "autoload=yes\0" \ + "download_cmd=tftp\0" \ + "console_args=console=ttyS0,115200\0" \ + "root_args=root=/dev/nfs rw\0" \ + "misc_args=ip=on\0" \ + "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ + "bootfile=/home/user/file\0" \ + "osfile=/home/user/board.uImage\0" \ + "fdtfile=/home/user/board.dtb\0" \ + "ubootfile=/home/user/u-boot.bin\0" \ + "fdtaddr=c00000\0" \ + "osaddr=0x1000000\0" \ + "loadaddr=0x1000000\0" \ + "prog_uboot1="CONFIG_PROG_UBOOT1"\0" \ + "prog_uboot2="CONFIG_PROG_UBOOT2"\0" \ + "prog_os1="CONFIG_PROG_OS1"\0" \ + "prog_os2="CONFIG_PROG_OS2"\0" \ + "prog_fdt1="CONFIG_PROG_FDT1"\0" \ + "prog_fdt2="CONFIG_PROG_FDT2"\0" \ + "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \ + "bootcmd_flash1=run set_bootargs; " \ + "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\ + "bootcmd_flash2=run set_bootargs; " \ + "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\ + "bootcmd=run bootcmd_flash1\0" +#endif /* __CONFIG_H */ From 997faf2edf5a868a36f8433432d403a545388f0e Mon Sep 17 00:00:00 2001 From: Magnus Sjalander Date: Wed, 26 May 2010 13:23:53 +0200 Subject: [PATCH 058/116] SPARC: added unaligned definitions Signed-off-by: Daniel Hellstrom --- arch/sparc/include/asm/byteorder.h | 1 + arch/sparc/include/asm/unaligned.h | 10 ++++++++++ 2 files changed, 11 insertions(+) create mode 100644 arch/sparc/include/asm/unaligned.h diff --git a/arch/sparc/include/asm/byteorder.h b/arch/sparc/include/asm/byteorder.h index b9fc65663f8..e3b3dec91d4 100644 --- a/arch/sparc/include/asm/byteorder.h +++ b/arch/sparc/include/asm/byteorder.h @@ -32,6 +32,7 @@ #if defined(__GNUC__) && !defined(__STRICT_ANSI__) #define __BYTEORDER_HAS_U64__ +#define __SWAB_64_THRU_32__ #endif #include #endif /* _SPARC_BYTEORDER_H */ diff --git a/arch/sparc/include/asm/unaligned.h b/arch/sparc/include/asm/unaligned.h new file mode 100644 index 00000000000..0e646f7fa95 --- /dev/null +++ b/arch/sparc/include/asm/unaligned.h @@ -0,0 +1,10 @@ +#ifndef _ASM_SPARC_UNALIGNED_H +#define _ASM_SPARC_UNALIGNED_H + +/* + * The SPARC can not do unaligned accesses, it must be split into multiple + * byte accesses. The SPARC is in big endian mode. + */ +#include + +#endif /* _ASM_SPARC_UNALIGNED_H */ From 9038e0e7029e47ec1700128351281225f711545e Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 22 Oct 2010 14:08:13 +0200 Subject: [PATCH 059/116] ehci-hcd.c: fix hanging under higher load This patch solves a problem with USB hanging under higher load on a i.MX31 board. It falls into class of typical USB problems and fixes: if you don't understand the real cause, add a delay somewhere. The problem appeared after introduction of ELF relocation, which results in smaller code, which appears to run faster (probably because it fits better in the cache); turning off the instruction cache, adding debug printf()s and increasing the delay have all been found to make the problem go away. Moving the original "udelay(1)" up in the code to it's new place made the problem appear much less frequently. Increasing the delay to 2 microseconds then made the code run reliably in all (hour-long) tests. To be on the safe side, we set it to 5 microseconds here. Signed-off-by: Heiko schocher Signed-off-by: Wolfgang Denk Cc: Remy Bohmer Cc: Stefano Babic --- drivers/usb/host/ehci-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index f44fc4e3c4b..982f96e8b8f 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -205,12 +205,12 @@ static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec) uint32_t result; do { result = ehci_readl(ptr); + udelay(5); if (result == ~(uint32_t)0) return -1; result &= mask; if (result == done) return 0; - udelay(1); usec--; } while (usec > 0); return -1; From af68c066709f20fcfd0ce6cd955bfbe4642d0a15 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 15 Oct 2010 15:53:45 +0200 Subject: [PATCH 060/116] ehci-pci: print hccr, hcor and hc_lenght It is useful to know the EHCI-PCI hccr, hcor and hc_lenght to make sure it was successfully registered, and at the correct location. Signed-off-by: Florian Fainelli --- drivers/usb/host/ehci-pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 047902a0c1c..cff34389295 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -53,6 +53,10 @@ int ehci_hcd_init(void) hcor = (struct ehci_hcor *)((uint32_t) hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n", + (uint32_t)hccr, (uint32_t)hcor, + (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + return 0; } From 8b675fe18e03d31f1c2a2ad576eab7e57c404751 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 20 Oct 2010 21:08:17 +0200 Subject: [PATCH 061/116] USB: fix Queue Element Transfer Descriptor changes Commit 3ed1607 "USB: sync Queue Element Transfer Descriptor against EHCI spec" added an "__attribute__ ((aligned (32)))" to the declaration of struct qTD, as used for example in the Linux kernel as well. However, it turns out that this attribute causes errors in "usb start" (like "ERROR: NOT USB_CONFIG_DESC 7b" and similar). Drop the attribute again. Signed-off-by: Wolfgang Denk Cc: Dan Lykowski Cc: Remy Bohmer Cc: Stefano Babic --- drivers/usb/host/ehci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index d3aa55b4a6c..945ab64f951 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -175,7 +175,7 @@ struct qTD { uint32_t qt_buffer_hi[5]; /* Appendix B */ /* pad struct for 32 byte alignment */ uint32_t unused[3]; -} __attribute__ ((aligned (32))); +}; /* Queue Head (QH). */ struct QH { From 0228348e9c0361dcb1c7e2678a3d899aca15f258 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 20 Oct 2010 07:15:35 -0400 Subject: [PATCH 062/116] usb: musb: constify a bit These ep and root hub structures need not be writable. Signed-off-by: Mike Frysinger --- drivers/usb/musb/musb_core.c | 2 +- drivers/usb/musb/musb_core.h | 2 +- drivers/usb/musb/musb_hcd.c | 36 +++++++++++++++++++----------------- 3 files changed, 21 insertions(+), 19 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 6fe2c39bce8..545ebf4b502 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -76,7 +76,7 @@ void musb_start(void) * epinfo - Pointer to EP configuration table * cnt - Number of entries in the EP conf table. */ -void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt) +void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt) { u16 csr; u16 fifoaddr = 64; /* First 64 bytes of FIFO reserved for EP0 */ diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 8f73876f806..a8adcce00fa 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -357,7 +357,7 @@ extern struct musb_regs *musbr; /* exported functions */ extern void musb_start(void); -extern void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt); +extern void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt); extern void write_fifo(u8 ep, u32 length, void *fifo_data); extern void read_fifo(u8 ep, u32 length, void *fifo_data); diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c index f38b279096c..8b0c61d6426 100644 --- a/drivers/usb/musb/musb_hcd.c +++ b/drivers/usb/musb/musb_hcd.c @@ -29,7 +29,7 @@ #define USB_MSC_BBB_GET_MAX_LUN 0xFE /* Endpoint configuration information */ -static struct musb_epinfo epinfo[3] = { +static const struct musb_epinfo epinfo[3] = { {MUSB_BULK_EP, 1, 512}, /* EP1 - Bluk Out - 512 Bytes */ {MUSB_BULK_EP, 0, 512}, /* EP1 - Bluk In - 512 Bytes */ {MUSB_INTR_EP, 0, 64} /* EP2 - Interrupt IN - 64 Bytes */ @@ -41,7 +41,7 @@ static int rh_devnum; static u32 port_status; /* Device descriptor */ -static u8 root_hub_dev_des[] = { +static const u8 root_hub_dev_des[] = { 0x12, /* __u8 bLength; */ 0x01, /* __u8 bDescriptorType; Device */ 0x00, /* __u16 bcdUSB; v1.1 */ @@ -63,7 +63,7 @@ static u8 root_hub_dev_des[] = { }; /* Configuration descriptor */ -static u8 root_hub_config_des[] = { +static const u8 root_hub_config_des[] = { 0x09, /* __u8 bLength; */ 0x02, /* __u8 bDescriptorType; Configuration */ 0x19, /* __u16 wTotalLength; */ @@ -96,14 +96,14 @@ static u8 root_hub_config_des[] = { 0xff /* __u8 ep_bInterval; 255 ms */ }; -static unsigned char root_hub_str_index0[] = { +static const unsigned char root_hub_str_index0[] = { 0x04, /* __u8 bLength; */ 0x03, /* __u8 bDescriptorType; String-descriptor */ 0x09, /* __u8 lang ID */ 0x04, /* __u8 lang ID */ }; -static unsigned char root_hub_str_index1[] = { +static const unsigned char root_hub_str_index1[] = { 0x1c, /* __u8 bLength; */ 0x03, /* __u8 bDescriptorType; String-descriptor */ 'M', /* __u8 Unicode */ @@ -557,7 +557,7 @@ static int musb_submit_rh_msg(struct usb_device *dev, unsigned long pipe, int len = 0; int stat = 0; u32 datab[4]; - u8 *data_buf = (u8 *) datab; + const u8 *data_buf = (u8 *) datab; u16 bmRType_bReq; u16 wValue; u16 wIndex; @@ -778,25 +778,27 @@ static int musb_submit_rh_msg(struct usb_device *dev, unsigned long pipe, break; - case RH_GET_DESCRIPTOR | RH_CLASS: + case RH_GET_DESCRIPTOR | RH_CLASS: { + u8 *_data_buf = (u8 *) datab; debug("RH_GET_DESCRIPTOR | RH_CLASS\n"); - data_buf[0] = 0x09; /* min length; */ - data_buf[1] = 0x29; - data_buf[2] = 0x1; /* 1 port */ - data_buf[3] = 0x01; /* per-port power switching */ - data_buf[3] |= 0x10; /* no overcurrent reporting */ + _data_buf[0] = 0x09; /* min length; */ + _data_buf[1] = 0x29; + _data_buf[2] = 0x1; /* 1 port */ + _data_buf[3] = 0x01; /* per-port power switching */ + _data_buf[3] |= 0x10; /* no overcurrent reporting */ /* Corresponds to data_buf[4-7] */ - data_buf[4] = 0; - data_buf[5] = 5; - data_buf[6] = 0; - data_buf[7] = 0x02; - data_buf[8] = 0xff; + _data_buf[4] = 0; + _data_buf[5] = 5; + _data_buf[6] = 0; + _data_buf[7] = 0x02; + _data_buf[8] = 0xff; len = min_t(unsigned int, leni, min_t(unsigned int, data_buf[0], wLength)); break; + } case RH_GET_CONFIGURATION: debug("RH_GET_CONFIGURATION\n"); From 2ff12285426b02dd7e13f2cb2fda53800dce741c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 20 Oct 2010 07:16:04 -0400 Subject: [PATCH 063/116] usb_storage: constify us_direction lookup table Signed-off-by: Mike Frysinger --- common/usb_storage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/common/usb_storage.c b/common/usb_storage.c index 613c4f0f1f7..1e6cd6af274 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -70,7 +70,7 @@ /* direction table -- this indicates the direction of the data * transfer for each command code -- a 1 indicates input */ -unsigned char us_direction[256/8] = { +static const unsigned char us_direction[256/8] = { 0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77, 0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, From 09c83a45b797aefbb41115af1b348494740460ce Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 22 Oct 2010 14:23:00 +0200 Subject: [PATCH 064/116] ehci-hcd.c: fix hanging under higher load This patch solves a problem with USB hanging under higher load on a i.MX31 board. It falls into class of typical USB problems and fixes: if you don't understand the real cause, add a delay somewhere. The problem appeared after introduction of ELF relocation, which results in smaller code, which appears to run faster (probably because it fits better in the cache); turning off the instruction cache, adding debug printf()s and increasing the delay have all been found to make the problem go away. Moving the original "udelay(1)" up in the code to it's new place made the problem appear much less frequently. Increasing the delay to 2 microseconds then made the code run reliably in all (hour-long) tests. To be on the safe side, we set it to 5 microseconds here. Signed-off-by: Heiko schocher Signed-off-by: Wolfgang Denk Cc: Remy Bohmer Cc: Stefano Babic --- drivers/usb/host/ehci-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index f44fc4e3c4b..982f96e8b8f 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -205,12 +205,12 @@ static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec) uint32_t result; do { result = ehci_readl(ptr); + udelay(5); if (result == ~(uint32_t)0) return -1; result &= mask; if (result == done) return 0; - udelay(1); usec--; } while (usec > 0); return -1; From ec50a8e389863ac35bfd9d9a2e8b30187318e59e Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Thu, 21 Oct 2010 17:20:12 +0200 Subject: [PATCH 065/116] cfi_flash: handle 'chip size exceeds address window' situation On some boards we have flash mapped high in the address space with considerably small window (say 0xFE000000 and 32MB). When we install bigger chip (say 64MB) on such a board strange things happen (flash_write() doesn't work at all, for ex). That's because cfi_flash driver doesn't care about window size at all. Of course, cleanest solution would probably be to just extend address window to be able to map the whole flash but for legacy/compatibility reasons some people prefer just truncate the flash size and never use the upper part. This patch adds an option for cfi_flash driver to handle this situation properly. To achieve this we add the new function cfi_flash_bank_size() which can be provided by the board code and weak-aliased to default implementation that returns value from the CONFIG_SYS_FLASH_BANKS_SIZES array if it's defined or 0 otherwise (the last case is added for compatibility). If non-zero flash bank size is provided and detected chip size is bigger than provided address window size the warning will be displayed and flash chip will be truncated. Signed-off-by: Ilya Yanok Changed cfi_flash_bank_size() return type to unsigned long to match caller function. Signed-off-by: Wolfgang Denk --- drivers/mtd/cfi_flash.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 798902f3376..c92c7a7a490 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -85,6 +85,17 @@ static phys_addr_t __cfi_flash_bank_addr(int i) phys_addr_t cfi_flash_bank_addr(int i) __attribute__((weak, alias("__cfi_flash_bank_addr"))); +static unsigned long __cfi_flash_bank_size(int i) +{ +#ifdef CONFIG_SYS_FLASH_BANKS_SIZES + return ((unsigned long [])CONFIG_SYS_FLASH_BANKS_SIZES)[i]; +#else + return 0; +#endif +} +unsigned long cfi_flash_bank_size(int i) + __attribute__((weak, alias("__cfi_flash_bank_size"))); + static void __flash_write8(u8 value, void *addr) { __raw_writeb(value, addr); @@ -1826,7 +1837,7 @@ static void flash_fixup_stm(flash_info_t *info, struct cfi_qry *qry) * The following code cannot be run from FLASH! * */ -ulong flash_get_size (phys_addr_t base, int banknum) +ulong flash_get_size (phys_addr_t base, int banknum, unsigned long max_size) { flash_info_t *info = &flash_info[banknum]; int i, j; @@ -1915,6 +1926,13 @@ ulong flash_get_size (phys_addr_t base, int banknum) debug ("size_ratio %d port %d bits chip %d bits\n", size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH, info->chipwidth << CFI_FLASH_SHIFT_WIDTH); + info->size = 1 << qry.dev_size; + /* multiply the size by the number of chips */ + info->size *= size_ratio; + if (max_size && (info->size > max_size)) { + debug("[truncated from %ldMiB]", info->size >> 20); + info->size = max_size; + } debug ("found %d erase regions\n", num_erase_regions); sect_cnt = 0; sector = base; @@ -1935,6 +1953,8 @@ ulong flash_get_size (phys_addr_t base, int banknum) debug ("erase_region_count = %d erase_region_size = %d\n", erase_region_count, erase_region_size); for (j = 0; j < erase_region_count; j++) { + if (sector - base >= info->size) + break; if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) { printf("ERROR: too many flash sectors\n"); break; @@ -1968,9 +1988,6 @@ ulong flash_get_size (phys_addr_t base, int banknum) } info->sector_count = sect_cnt; - info->size = 1 << qry.dev_size; - /* multiply the size by the number of chips */ - info->size *= size_ratio; info->buffer_size = 1 << le16_to_cpu(qry.max_buf_write_size); tmp = 1 << qry.block_erase_timeout_typ; info->erase_blk_tout = tmp * @@ -2026,7 +2043,8 @@ unsigned long flash_init (void) flash_info[i].flash_id = FLASH_UNKNOWN; if (!flash_detect_legacy(cfi_flash_bank_addr(i), i)) - flash_get_size(cfi_flash_bank_addr(i), i); + flash_get_size(cfi_flash_bank_addr(i), i, + cfi_flash_bank_size(i)); size += flash_info[i].size; if (flash_info[i].flash_id == FLASH_UNKNOWN) { #ifndef CONFIG_SYS_FLASH_QUIET_TEST From e36aff68221d4dec4bb851d7b747903e89d886bb Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Thu, 21 Oct 2010 17:20:13 +0200 Subject: [PATCH 066/116] a4m072: add CONFIG_SYS_FLASH_BANKS_SIZES define This patch adds CONFIG_SYS_FLASH_BANKS_SIZES define to make use of new cfi_flash driver ability to detect flash chips that are bigger than a corresponding address window (we have such situation on some revs of a4m072). Signed-off-by: Ilya Yanok --- include/configs/a4m072.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index a24b304e639..f18bc45c4d1 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -228,6 +228,7 @@ #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_CS0_START} +#define CONFIG_SYS_FLASH_BANKS_SIZES {CONFIG_SYS_CS0_SIZE} /* * Environment settings From 3f7ffa440a60d5b37d1eabbee1b4c2af60eb104b Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 22 Oct 2010 00:24:52 -0500 Subject: [PATCH 067/116] env_flash: Disable debug print statements With debug the follow is printed: => saveenv Saving Environment to Flash... Data to save 0x18000 Data (start 0xfff48000, len 0x18000) saved at 0x7fe63f20 Protect off FFF40000 ... FFF5FFFF Un-Protected 1 sectors Erasing Flash... . done Erased 1 sectors Writing to Flash... Restoring the rest of data to 0xfff48000 len 0x18000 done Protected 1 sectors => Without debug: => saveenv Saving Environment to Flash... Un-Protected 1 sectors Erasing Flash... . done Erased 1 sectors Writing to Flash... done Protected 1 sectors => Signed-off-by: Peter Tyser --- common/env_flash.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/common/env_flash.c b/common/env_flash.c index 1da78b7102e..54c0bfec762 100644 --- a/common/env_flash.c +++ b/common/env_flash.c @@ -82,9 +82,6 @@ uchar env_get_char_spec(int index) return (*((uchar *)(gd->env_addr + index))); } -#undef debug -#define debug printf - #ifdef CONFIG_ENV_ADDR_REDUND int env_init(void) From c4b115f536b0cb41b0d863ab00fe52d7772433a0 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 22 Oct 2010 03:18:13 -0500 Subject: [PATCH 068/116] hwconfig: Utilize getenv_f before relocation to allow for larger buffer Since we use hwconfig in cases before relocation (like getting DDR params on FSL PPC systems), we can have strings that exceed the early small (32 byte) buffer size that getenv will handle. So we explicitly allocate our own buffer on the stack and use if to handle getting the hwconfig env string. We currently utilize a string length of 128 bytes. This allows us to get rid of boot messages like: env_buf too small [32] Signed-off-by: Kumar Gala --- common/hwconfig.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/common/hwconfig.c b/common/hwconfig.c index 1f9f4a09b4b..3c9759fc557 100644 --- a/common/hwconfig.c +++ b/common/hwconfig.c @@ -26,6 +26,8 @@ #define min(a, b) (((a) < (b)) ? (a) : (b)) #endif /* HWCONFIG_TEST */ +DECLARE_GLOBAL_DATA_PTR; + static const char *hwconfig_parse(const char *opts, size_t maxlen, const char *opt, char *stopchs, char eqch, size_t *arglen) @@ -69,9 +71,26 @@ next: const char *cpu_hwconfig __attribute__((weak)); const char *board_hwconfig __attribute__((weak)); +#define HWCONFIG_PRE_RELOC_BUF_SIZE 128 + static const char *__hwconfig(const char *opt, size_t *arglen) { - const char *env_hwconfig = getenv("hwconfig"); + const char *env_hwconfig = NULL; + char buf[HWCONFIG_PRE_RELOC_BUF_SIZE]; + + if (gd->flags & GD_FLG_ENV_READY) { + env_hwconfig = getenv("hwconfig"); + } else { + /* + * Use our own on stack based buffer before relocation to allow + * accessing longer hwconfig strings that might be in the + * environment before we've relocated. This is pretty fragile + * on both the use of stack and if the buffer is big enough. + * However we will get a warning from getenv_f for the later. + */ + if ((getenv_f("hwconfig", buf, sizeof(buf))) > 0) + env_hwconfig = buf; + } if (env_hwconfig) return hwconfig_parse(env_hwconfig, strlen(env_hwconfig), From 116ef54d6804e3140ff4fc383ff8b6b7c7cf9f7b Mon Sep 17 00:00:00 2001 From: Andre Schwarz Date: Fri, 22 Oct 2010 11:21:46 +0200 Subject: [PATCH 069/116] MVBLM7: make TSEC2 work again. SICRH has been misconfigured, i.e. TSEC2 clock + D[0:3] are GPIOs. Fix this to be RGMII signals again. Signed-off-by: Andre Schwarz --- include/configs/MVBLM7.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 04d97cd1dcd..44d45e3b3af 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -324,7 +324,7 @@ #define CONFIG_SYS_SCCR_TSEC1CM 1 #define CONFIG_SYS_SCCR_TSEC2CM 1 -#define CONFIG_SYS_SICRH 0x1fff8003 +#define CONFIG_SYS_SICRH 0x1fef0003 #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1 | SICRL_USB0) #define CONFIG_SYS_HID0_INIT 0x000000000 From cdb1d4f97e7e3599549852b89f2fd56cbf1e5322 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 19 Oct 2010 11:13:22 +0200 Subject: [PATCH 070/116] ARM: fix relocation support for onenand device. We also have to relocate the onenand command table manually, otherwise onenand command don't work. Signed-off-by: Enric Balletbo i Serra --- arch/arm/lib/board.c | 3 +++ common/cmd_onenand.c | 6 ++++++ 2 files changed, 9 insertions(+) diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index ffe261bd445..af9a414b88b 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -716,6 +716,9 @@ void board_init_r (gd_t *id, ulong dest_addr) #if defined(CONFIG_CMD_I2C) i2c_reloc(); #endif +#if defined(CONFIG_CMD_ONENAND) + onenand_reloc(); +#endif #endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ #ifdef CONFIG_LOGBUFFER diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c index 83d967bd181..fe84c3be96b 100644 --- a/common/cmd_onenand.c +++ b/common/cmd_onenand.c @@ -525,6 +525,12 @@ static cmd_tbl_t cmd_onenand_sub[] = { U_BOOT_CMD_MKENT(markbad, CONFIG_SYS_MAXARGS, 0, do_onenand_markbad, "", ""), }; +#ifndef CONFIG_RELOC_FIXUP_WORKS +void onenand_reloc(void) { + fixup_cmdtable(cmd_onenand_sub, ARRAY_SIZE(cmd_onenand_sub)); +} +#endif + static int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { cmd_tbl_t *c; From 6d79c39958aa0245e59f33860cd1ddd589119968 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 20 Oct 2010 03:34:19 -0400 Subject: [PATCH 071/116] MAKEALL: drop non-existent i386 config --- MAKEALL | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/MAKEALL b/MAKEALL index 4ae741a6956..8ad7e922203 100755 --- a/MAKEALL +++ b/MAKEALL @@ -554,9 +554,7 @@ LIST_mips_el=" \ ## i386 Systems ######################################################################### -LIST_x86="$(boards_by_arch i386) - sc520_eNET \ -" +LIST_x86="$(boards_by_arch i386)" ######################################################################### ## Nios-II Systems From bc5e1701f39cc6118f364d09d711c0406757693c Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 24 Oct 2010 15:37:12 +0200 Subject: [PATCH 072/116] lite5200b_PM: fix compile warning Fix warning: icecube.c: In function 'lite5200b_wakeup': icecube.c:83: warning: format '%08lx' expects type 'long unsigned int', but argument 2 has type 'void (*)(void)' Signed-off-by: Wolfgang Denk --- board/icecube/icecube.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index 47b21955579..a9e4448f4d0 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -80,7 +80,7 @@ void lite5200b_wakeup(void) /* jump back to linux kernel code */ linux_wakeup = SAVED_ADDR; printf("\n\nLooks like we just woke, transferring control to 0x%08lx\n", - linux_wakeup); + (unsigned long)linux_wakeup); linux_wakeup(); } #else From 26fe3d2b8f505744bf29348af0fed405d493e881 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 24 Oct 2010 15:46:08 +0200 Subject: [PATCH 073/116] VoVPN-GW_100MHz: drop unsupported board configuration The 100MHz configuation of the VoVPN-GW has never been supported, so drop it now. Signed-off-by: Wolfgang Denk --- boards.cfg | 1 - doc/README.scrapyard | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/boards.cfg b/boards.cfg index 4efbff85fd4..42fc967ee23 100644 --- a/boards.cfg +++ b/boards.cfg @@ -524,7 +524,6 @@ MPC8272ADS powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS PQ2FADS-VR powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000 PQ2FADS-ZU powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS PQ2FADS_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000 -VoVPN-GW_100MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_100MHz VoVPN-GW_66MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_66MHz MPC8308RDB powerpc mpc83xx mpc8308rdb freescale MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale diff --git a/doc/README.scrapyard b/doc/README.scrapyard index a707c6fa937..42865593bd7 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,7 @@ easily if here is something they might want to dig for... Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +VoVPN-GW_100MHz powerpc MPC8260 - 2010-10-24 Juergen Selent NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl From 1db3fca7192dc3ce7196c628db308ee6ac1ac87a Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 24 Oct 2010 16:07:23 +0200 Subject: [PATCH 074/116] MPC8315ERD: fix build error Commit 29c6fbe "MPC5121: Add USB EHCI support" renamed CONFIG_SYS_MPC8xxx_USB_ADDR into CONFIG_SYS_FSL_USB_ADDR but missed to update arch/powerpc/cpu/mpc83xx/cpu_init.c, resulting in: cpu_init.c: In function 'cpu_init_f': cpu_init.c:332: error: 'CONFIG_SYS_MPC8xxx_USB_ADDR' undeclared (first use in this function) cpu_init.c:332: error: (Each undeclared identifier is reported only once cpu_init.c:332: error: for each function it appears in.) make[1]: *** [/work/wd/tmp-ppc/arch/powerpc/cpu/mpc83xx/cpu_init.o] Error 1 Fix this. Signed-off-by: Wolfgang Denk Cc: Kim Phillips --- arch/powerpc/cpu/mpc83xx/cpu_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index f01c09a91bf..7a1cae75da0 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -329,7 +329,7 @@ void cpu_init_f (volatile immap_t * im) #ifdef CONFIG_USB_EHCI_FSL #ifndef CONFIG_MPC834x uint32_t temp; - struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR; + struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB_ADDR; /* Configure interface. */ setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN); From 1339657abd116b046775467ec10e5519758c66ed Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 24 Oct 2010 16:49:12 +0200 Subject: [PATCH 075/116] hcu4, hcu5: fix out of tree building Out of tree building of the Netstal hcu4 and hcu5 boards failed like that: Assembler messages: Fatal error: can't create /work/wd/tmp-ppc/board/netstal/hcu4/../common/fixed_sdram.o: No such file or directory Assembler messages: Fatal error: can't create /work/wd/tmp-ppc/board/netstal/hcu4/../common/nm_bsp.o: No such file or directory make[1]: *** [/work/wd/tmp-ppc/board/netstal/hcu4/../common/fixed_sdram.o] Error 2 Adapt (and simplify) the respective Makefiles. Signed-off-by: Wolfgang Denk Cc: Niklaus Giger --- board/netstal/hcu4/Makefile | 20 ++++++++++---------- board/netstal/hcu5/Makefile | 17 +++++++++-------- 2 files changed, 19 insertions(+), 18 deletions(-) diff --git a/board/netstal/hcu4/Makefile b/board/netstal/hcu4/Makefile index 6722d53927e..cd626428944 100644 --- a/board/netstal/hcu4/Makefile +++ b/board/netstal/hcu4/Makefile @@ -19,24 +19,24 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif LIB = $(obj)lib$(BOARD).a -# NOBJS : Netstal common objects -NOBJS = fixed_sdram.o nm_bsp.o -COBJS = $(BOARD).o -SOBJS = +COBJS = $(BOARD).o \ + ../common/fixed_sdram.o \ + ../common/nm_bsp.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) $(addprefix ../common/,$(NOBJS:.o=.c)) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -NOBJS := $(addprefix $(obj)../common/,$(NOBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) $(NOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(NOBJS) +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $^ clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/netstal/hcu5/Makefile b/board/netstal/hcu5/Makefile index 445677104c8..d037552d709 100644 --- a/board/netstal/hcu5/Makefile +++ b/board/netstal/hcu5/Makefile @@ -19,22 +19,23 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif LIB = $(obj)lib$(BOARD).a - -# NOBJS : Netstal common objects -NOBJS = nm_bsp.o -COBJS = $(BOARD).o sdram.o +COBJS = $(BOARD).o \ + sdram.o \ + ../common/nm_bsp.o SOBJS = init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) $(addprefix ../common/,$(NOBJS:.o=.c)) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -NOBJS := $(addprefix $(obj)../common/,$(NOBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) $(NOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(NOBJS) +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $^ clean: rm -f $(SOBJS) $(OBJS) From 4df66894954ec6411d22e3a86070014d74bafb5c Mon Sep 17 00:00:00 2001 From: Steve Sakoman Date: Fri, 22 Oct 2010 13:48:00 -0700 Subject: [PATCH 076/116] ARMV7: OMAP: I2C driver: Fix bug found in 37XX testing On OMAP36/37XX the standard on chip pullups are not sufficient to ensure proper i2c operation without external pullups or switching to high speed mode and enabling special on chip pullups. This is an issue for Beagle xM, which does not have external pullups on the expansion board i2c lines. The issue manifests itself as an AL (arbitration lost) error when probing for a non-existent device (i.e. on a Beagle xM with no expansion boards attached). This issue does not occur on expansion boards that include pullups or on Overo 37XX COM's since they include pull-ups. This patch fixes the issue by checking for the AL bit in the i2c_probe function. Signed-off-by: Steve Sakoman --- drivers/i2c/omap24xx_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index a72d1a12570..fab49fd969e 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -329,7 +329,7 @@ int i2c_probe (uchar chip) while (1) { status = wait_for_pin(); - if (status == 0) { + if (status == 0 || status & I2C_STAT_AL) { res = 1; goto probe_exit; } From a605ea7e8322000d99a890d3173748f62ccb8549 Mon Sep 17 00:00:00 2001 From: Dirk Eibach Date: Thu, 21 Oct 2010 10:50:05 +0200 Subject: [PATCH 077/116] ppc4xx: Add Io and IoCon 405EP board support Board support for the Guntermann & Drunck CATCenter Io. Board support for the Guntermann & Drunck IoCon. Signed-off-by: Dirk Eibach Signed-off-by: Stefan Roese --- MAINTAINERS | 2 + board/gdsys/405ep/405ep.c | 93 +++++++++++++ board/gdsys/405ep/Makefile | 54 ++++++++ board/gdsys/405ep/io.c | 181 ++++++++++++++++++++++++ board/gdsys/405ep/iocon.c | 236 +++++++++++++++++++++++++++++++ board/gdsys/common/Makefile | 58 ++++++++ board/gdsys/common/fpga.h | 37 +++++ board/gdsys/common/miiphybb.c | 102 ++++++++++++++ board/gdsys/common/osd.c | 247 +++++++++++++++++++++++++++++++++ board/gdsys/common/osd.h | 29 ++++ boards.cfg | 2 + include/configs/io.h | 251 +++++++++++++++++++++++++++++++++ include/configs/iocon.h | 252 ++++++++++++++++++++++++++++++++++ 13 files changed, 1544 insertions(+) create mode 100644 board/gdsys/405ep/405ep.c create mode 100644 board/gdsys/405ep/Makefile create mode 100644 board/gdsys/405ep/io.c create mode 100644 board/gdsys/405ep/iocon.c create mode 100644 board/gdsys/common/Makefile create mode 100644 board/gdsys/common/fpga.h create mode 100644 board/gdsys/common/miiphybb.c create mode 100644 board/gdsys/common/osd.c create mode 100644 board/gdsys/common/osd.h create mode 100644 include/configs/io.h create mode 100644 include/configs/iocon.h diff --git a/MAINTAINERS b/MAINTAINERS index b0da631fe19..9258cb12732 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -144,6 +144,8 @@ Dirk Eibach dlvision PPC405EP gdppc440etx PPC440EP/GR intip PPC460EX + io PPC405EP + iocon PPC405EP neo PPC405EP Dave Ellis diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c new file mode 100644 index 00000000000..d3bd2330943 --- /dev/null +++ b/board/gdsys/405ep/405ep.c @@ -0,0 +1,93 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include "../common/fpga.h" + +#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) +#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) +#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) + +#define REFLECTION_TESTPATTERN 0xdede +#define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff) + +int board_early_init_f(void) +{ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + mtdcr(UIC0ER, 0x00000000); /* disable all ints */ + mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */ + mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ + mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ + mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */ + mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ + + /* + * EBC Configuration Register: set ready timeout to 512 ebc-clks + * -> ca. 15 us + */ + mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */ + + /* + * setup io-latches for reset + */ + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); + + /* + * set "startup-finished"-gpios + */ + gpio_write_bit(21, 0); + gpio_write_bit(22, 1); + + /* + * wait for fpga-done + * fail ungraceful if fpga is not configuring properly + */ + while (!(in_le16((void *)LATCH2_BASE) & 0x0010)) + ; + + /* + * setup io-latches for boot (stop reset) + */ + udelay(10); + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); + + /* + * wait for fpga out of reset + * fail ungraceful if fpga is not working properly + */ + while (1) { + fpga_set_reg(CONFIG_SYS_FPGA_RFL_LOW, REFLECTION_TESTPATTERN); + if (fpga_get_reg(CONFIG_SYS_FPGA_RFL_HIGH) == + REFLECTION_TESTPATTERN_INV) + break; + } + + return 0; +} diff --git a/board/gdsys/405ep/Makefile b/board/gdsys/405ep/Makefile new file mode 100644 index 00000000000..13dff52d77b --- /dev/null +++ b/board/gdsys/405ep/Makefile @@ -0,0 +1,54 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-$(CONFIG_IO) += io.o +COBJS-$(CONFIG_IOCON) += iocon.o + +COBJS := $(BOARD).o $(COBJS-y) +SOBJS = + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/gdsys/405ep/io.c b/board/gdsys/405ep/io.c new file mode 100644 index 00000000000..80877b61ffa --- /dev/null +++ b/board/gdsys/405ep/io.c @@ -0,0 +1,181 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include + +#include "../common/fpga.h" + +#define PHYREG_CONTROL 0 +#define PHYREG_PAGE_ADDRESS 22 +#define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1 16 +#define PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2 26 + +enum { + REG_VERSIONS = 0x0002, + REG_FPGA_FEATURES = 0x0004, + REG_FPGA_VERSION = 0x0006, + REG_QUAD_SERDES_RESET = 0x0012, +}; + +enum { + UNITTYPE_CCD_SWITCH = 1, +}; + +enum { + HWVER_100 = 0, + HWVER_110 = 1, + HWVER_121 = 2, + HWVER_122 = 3, +}; + +int configure_gbit_phy(unsigned char addr) +{ + unsigned short value; + + /* select page 2 */ + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PAGE_ADDRESS, 0x0002)) + goto err_out; + /* disable SGMII autonegotiation */ + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2, 0x800a)) + goto err_out; + /* select page 0 */ + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PAGE_ADDRESS, 0x0000)) + goto err_out; + /* switch from powerdown to normal operation */ + if (miiphy_read(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, &value)) + goto err_out; + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, value & ~0x0004)) + goto err_out; + /* reset phy so settings take effect */ + if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr, + PHYREG_CONTROL, 0x9140)) + goto err_out; + + return 0; + +err_out: + printf("Error writing to the PHY addr=%02x\n", addr); + return -1; +} + +/* + * Check Board Identity: + */ +int checkboard(void) +{ + char *s = getenv("serial#"); + u16 versions = fpga_get_reg(REG_VERSIONS); + u16 fpga_version = fpga_get_reg(REG_FPGA_VERSION); + u16 fpga_features = fpga_get_reg(REG_FPGA_FEATURES); + unsigned unit_type; + unsigned hardware_version; + unsigned feature_channels; + unsigned feature_expansion; + + unit_type = (versions & 0xf000) >> 12; + hardware_version = versions & 0x000f; + feature_channels = fpga_features & 0x007f; + feature_expansion = fpga_features & (1<<15); + + printf("Board: "); + + printf("CATCenter Io"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + puts("\n "); + + switch (unit_type) { + case UNITTYPE_CCD_SWITCH: + printf("CCD-Switch"); + break; + + default: + printf("UnitType %d(not supported)", unit_type); + break; + } + + switch (hardware_version) { + case HWVER_100: + printf(" HW-Ver 1.00\n"); + break; + + case HWVER_110: + printf(" HW-Ver 1.10\n"); + break; + + case HWVER_121: + printf(" HW-Ver 1.21\n"); + break; + + case HWVER_122: + printf(" HW-Ver 1.22\n"); + break; + + default: + printf(" HW-Ver %d(not supported)\n", + hardware_version); + break; + } + + printf(" FPGA V %d.%02d, features:", + fpga_version / 100, fpga_version % 100); + + printf(" %d channel(s)", feature_channels); + + printf(", expansion %ssupported\n", feature_expansion ? "" : "un"); + + return 0; +} + +/* + * setup Gbit PHYs + */ +int last_stage_init(void) +{ + unsigned int k; + + miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME, + bb_miiphy_read, bb_miiphy_write); + + for (k = 0; k < 32; ++k) + configure_gbit_phy(k); + + /* take fpga serdes blocks out of reset */ + fpga_set_reg(REG_QUAD_SERDES_RESET, 0); + + return 0; +} diff --git a/board/gdsys/405ep/iocon.c b/board/gdsys/405ep/iocon.c new file mode 100644 index 00000000000..ecd6cb2396c --- /dev/null +++ b/board/gdsys/405ep/iocon.c @@ -0,0 +1,236 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include "../common/fpga.h" +#include "../common/osd.h" + +enum { + REG_VERSIONS = 0x0002, + REG_FPGA_VERSION = 0x0004, + REG_FPGA_FEATURES = 0x0006, +}; + +enum { + UNITTYPE_MAIN_SERVER = 0, + UNITTYPE_MAIN_USER = 1, + UNITTYPE_VIDEO_SERVER = 2, + UNITTYPE_VIDEO_USER = 3, +}; + +enum { + HWVER_100 = 0, + HWVER_104 = 1, + HWVER_110 = 2, +}; + +enum { + COMPRESSION_NONE = 0, + COMPRESSION_TYPE1_DELTA, +}; + +enum { + AUDIO_NONE = 0, + AUDIO_TX = 1, + AUDIO_RX = 2, + AUDIO_RXTX = 3, +}; + +enum { + SYSCLK_147456 = 0, +}; + +enum { + RAM_DDR2_32 = 0, +}; + +/* + * Check Board Identity: + */ +int checkboard(void) +{ + char *s = getenv("serial#"); + u16 versions = fpga_get_reg(REG_VERSIONS); + u16 fpga_version = fpga_get_reg(REG_FPGA_VERSION); + u16 fpga_features = fpga_get_reg(REG_FPGA_FEATURES); + unsigned unit_type; + unsigned hardware_version; + unsigned feature_compression; + unsigned feature_osd; + unsigned feature_audio; + unsigned feature_sysclock; + unsigned feature_ramconfig; + unsigned feature_carriers; + unsigned feature_video_channels; + + unit_type = (versions & 0xf000) >> 12; + hardware_version = versions & 0x000f; + feature_compression = (fpga_features & 0xe000) >> 13; + feature_osd = fpga_features & (1<<11); + feature_audio = (fpga_features & 0x0600) >> 9; + feature_sysclock = (fpga_features & 0x0180) >> 7; + feature_ramconfig = (fpga_features & 0x0060) >> 5; + feature_carriers = (fpga_features & 0x000c) >> 2; + feature_video_channels = fpga_features & 0x0003; + + printf("Board: "); + + printf("IoCon"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + puts("\n "); + + switch (unit_type) { + case UNITTYPE_MAIN_USER: + printf("Mainchannel"); + break; + + case UNITTYPE_VIDEO_USER: + printf("Videochannel"); + break; + + default: + printf("UnitType %d(not supported)", unit_type); + break; + } + + switch (hardware_version) { + case HWVER_100: + printf(" HW-Ver 1.00\n"); + break; + + case HWVER_104: + printf(" HW-Ver 1.04\n"); + break; + + case HWVER_110: + printf(" HW-Ver 1.10\n"); + break; + + default: + printf(" HW-Ver %d(not supported)\n", + hardware_version); + break; + } + + printf(" FPGA V %d.%02d, features:", + fpga_version / 100, fpga_version % 100); + + + switch (feature_compression) { + case COMPRESSION_NONE: + printf(" no compression"); + break; + + case COMPRESSION_TYPE1_DELTA: + printf(" type1-deltacompression"); + break; + + default: + printf(" compression %d(not supported)", feature_compression); + break; + } + + printf(", %sosd", feature_osd ? "" : "no "); + + switch (feature_audio) { + case AUDIO_NONE: + printf(", no audio"); + break; + + case AUDIO_TX: + printf(", audio tx"); + break; + + case AUDIO_RX: + printf(", audio rx"); + break; + + case AUDIO_RXTX: + printf(", audio rx+tx"); + break; + + default: + printf(", audio %d(not supported)", feature_audio); + break; + } + + puts(",\n "); + + switch (feature_sysclock) { + case SYSCLK_147456: + printf("clock 147.456 MHz"); + break; + + default: + printf("clock %d(not supported)", feature_sysclock); + break; + } + + switch (feature_ramconfig) { + case RAM_DDR2_32: + printf(", RAM 32 bit DDR2"); + break; + + default: + printf(", RAM %d(not supported)", feature_ramconfig); + break; + } + + printf(", %d carrier(s)", feature_carriers); + + printf(", %d video channel(s)\n", feature_video_channels); + + return 0; +} + +int last_stage_init(void) +{ + return osd_probe(); +} + +/* + * provide access to fpga gpios (for I2C bitbang) + */ +void fpga_gpio_set(int pin) +{ + out_le16((void *)(CONFIG_SYS_FPGA_BASE + 0x18), pin); +} + +void fpga_gpio_clear(int pin) +{ + out_le16((void *)(CONFIG_SYS_FPGA_BASE + 0x16), pin); +} + +int fpga_gpio_get(int pin) +{ + return in_le16((void *)(CONFIG_SYS_FPGA_BASE + 0x14)) & pin; +} diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile new file mode 100644 index 00000000000..93cde5aa174 --- /dev/null +++ b/board/gdsys/common/Makefile @@ -0,0 +1,58 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)board/$(VENDOR)/common) +endif + +LIB = $(obj)lib$(VENDOR).a + +COBJS-$(CONFIG_IO) += miiphybb.o +COBJS-$(CONFIG_IOCON) += osd.o + +COBJS := $(COBJS-y) +SOBJS = + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/gdsys/common/fpga.h b/board/gdsys/common/fpga.h new file mode 100644 index 00000000000..c1434e7ab2e --- /dev/null +++ b/board/gdsys/common/fpga.h @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _FPGA_H_ +#define _FPGA_H_ + +static inline u16 fpga_get_reg(unsigned reg) +{ + return in_le16((void *)(CONFIG_SYS_FPGA_BASE + reg)); +} + +static inline void fpga_set_reg(unsigned reg, u16 val) +{ + return out_le16((void *)(CONFIG_SYS_FPGA_BASE + reg), val); +} + +#endif diff --git a/board/gdsys/common/miiphybb.c b/board/gdsys/common/miiphybb.c new file mode 100644 index 00000000000..e56e966509c --- /dev/null +++ b/board/gdsys/common/miiphybb.c @@ -0,0 +1,102 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include + +static int io_bb_mii_init(struct bb_miiphy_bus *bus) +{ + return 0; +} + +static int io_bb_mdio_active(struct bb_miiphy_bus *bus) +{ + out_be32((void *)GPIO0_TCR, + in_be32((void *)GPIO0_TCR) | CONFIG_SYS_MDIO_PIN); + + return 0; +} + +static int io_bb_mdio_tristate(struct bb_miiphy_bus *bus) +{ + out_be32((void *)GPIO0_TCR, + in_be32((void *)GPIO0_TCR) & ~CONFIG_SYS_MDIO_PIN); + + return 0; +} + +static int io_bb_set_mdio(struct bb_miiphy_bus *bus, int v) +{ + if (v) + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) | CONFIG_SYS_MDIO_PIN); + else + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_MDIO_PIN); + + return 0; +} + +static int io_bb_get_mdio(struct bb_miiphy_bus *bus, int *v) +{ + *v = ((in_be32((void *)GPIO0_IR) & CONFIG_SYS_MDIO_PIN) != 0); + + return 0; +} + +static int io_bb_set_mdc(struct bb_miiphy_bus *bus, int v) +{ + if (v) + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) | CONFIG_SYS_MDC_PIN); + else + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_MDC_PIN); + + return 0; +} + +static int io_bb_delay(struct bb_miiphy_bus *bus) +{ + udelay(1); + + return 0; +} + +struct bb_miiphy_bus bb_miiphy_buses[] = { + { + .name = CONFIG_SYS_GBIT_MII_BUSNAME, + .init = io_bb_mii_init, + .mdio_active = io_bb_mdio_active, + .mdio_tristate = io_bb_mdio_tristate, + .set_mdio = io_bb_set_mdio, + .get_mdio = io_bb_get_mdio, + .set_mdc = io_bb_set_mdc, + .delay = io_bb_delay, + } +}; + +int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / + sizeof(bb_miiphy_buses[0]); diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c new file mode 100644 index 00000000000..05800ffba48 --- /dev/null +++ b/board/gdsys/common/osd.c @@ -0,0 +1,247 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include "fpga.h" + +#define CH7301_I2C_ADDR 0x75 + +#define PIXCLK_640_480_60 25180000 + +#define BASE_WIDTH 32 +#define BASE_HEIGHT 16 +#define BUFSIZE (BASE_WIDTH * BASE_HEIGHT) + +enum { + REG_CONTROL = 0x0010, + REG_MPC3W_CONTROL = 0x001a, + REG_VIDEOCONTROL = 0x0042, + REG_OSDVERSION = 0x0100, + REG_OSDFEATURES = 0x0102, + REG_OSDCONTROL = 0x0104, + REG_XY_SIZE = 0x0106, + REG_VIDEOMEM = 0x0800, +}; + +enum { + CH7301_CM = 0x1c, /* Clock Mode Register */ + CH7301_IC = 0x1d, /* Input Clock Register */ + CH7301_GPIO = 0x1e, /* GPIO Control Register */ + CH7301_IDF = 0x1f, /* Input Data Format Register */ + CH7301_CD = 0x20, /* Connection Detect Register */ + CH7301_DC = 0x21, /* DAC Control Register */ + CH7301_HPD = 0x23, /* Hot Plug Detection Register */ + CH7301_TCTL = 0x31, /* DVI Control Input Register */ + CH7301_TPCP = 0x33, /* DVI PLL Charge Pump Ctrl Register */ + CH7301_TPD = 0x34, /* DVI PLL Divide Register */ + CH7301_TPVT = 0x35, /* DVI PLL Supply Control Register */ + CH7301_TPF = 0x36, /* DVI PLL Filter Register */ + CH7301_TCT = 0x37, /* DVI Clock Test Register */ + CH7301_TSTP = 0x48, /* Test Pattern Register */ + CH7301_PM = 0x49, /* Power Management register */ + CH7301_VID = 0x4a, /* Version ID Register */ + CH7301_DID = 0x4b, /* Device ID Register */ + CH7301_DSP = 0x56, /* DVI Sync polarity Register */ +}; + +static void mpc92469ac_calc_parameters(unsigned int fout, + unsigned int *post_div, unsigned int *feedback_div) +{ + unsigned int n = *post_div; + unsigned int m = *feedback_div; + unsigned int a; + unsigned int b = 14745600 / 16; + + if (fout < 50169600) + n = 8; + else if (fout < 100339199) + n = 4; + else if (fout < 200678399) + n = 2; + else + n = 1; + + a = fout * n + (b / 2); /* add b/2 for proper rounding */ + + m = a / b; + + *post_div = n; + *feedback_div = m; +} + +static void mpc92469ac_set(unsigned int fout) +{ + unsigned int n; + unsigned int m; + unsigned int bitval = 0; + mpc92469ac_calc_parameters(fout, &n, &m); + + switch (n) { + case 1: + bitval = 0x00; + break; + case 2: + bitval = 0x01; + break; + case 4: + bitval = 0x02; + break; + case 8: + bitval = 0x03; + break; + } + + fpga_set_reg(REG_MPC3W_CONTROL, (bitval << 9) | m); +} + +static int osd_write_videomem(unsigned offset, u16 *data, size_t charcount) +{ + unsigned int k; + + for (k = 0; k < charcount; ++k) { + if (offset + k >= BUFSIZE) + return -1; + fpga_set_reg(REG_VIDEOMEM + 2 * (offset + k), data[k]); + } + + return charcount; +} + +static int osd_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + unsigned x; + unsigned y; + unsigned charcount; + unsigned len; + u8 color; + unsigned int k; + u16 buf[BUFSIZE]; + char *text; + + if (argc < 5) { + cmd_usage(cmdtp); + return 1; + } + + x = simple_strtoul(argv[1], NULL, 16); + y = simple_strtoul(argv[2], NULL, 16); + color = simple_strtoul(argv[3], NULL, 16); + text = argv[4]; + charcount = strlen(text); + len = (charcount > BUFSIZE) ? BUFSIZE : charcount; + + for (k = 0; k < len; ++k) + buf[k] = (text[k] << 8) | color; + + return osd_write_videomem(y * BASE_WIDTH + x, buf, len); +} + +int osd_probe(void) +{ + u8 value; + u16 version = fpga_get_reg(REG_OSDVERSION); + u16 features = fpga_get_reg(REG_OSDFEATURES); + unsigned width; + unsigned height; + + width = ((features & 0x3f00) >> 8) + 1; + height = (features & 0x001f) + 1; + + printf("OSD: Digital-OSD version %01d.%02d, %d" "x%d characters\n", + version/100, version%100, width, height); + + value = i2c_reg_read(CH7301_I2C_ADDR, CH7301_DID); + if (value != 0x17) { + printf(" Probing CH7301 failed, DID %02x\n", value); + return -1; + } + i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPCP, 0x08); + i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPD, 0x16); + i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPF, 0x60); + i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x09); + i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0xc0); + + mpc92469ac_set(PIXCLK_640_480_60); + fpga_set_reg(REG_VIDEOCONTROL, 0x0002); + fpga_set_reg(REG_OSDCONTROL, 0x0049); + + fpga_set_reg(REG_XY_SIZE, ((32 - 1) << 8) | (16 - 1)); + + return 0; +} + +int osd_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + unsigned x; + unsigned y; + unsigned k; + u16 buffer[BASE_WIDTH]; + char *rp; + u16 *wp = buffer; + unsigned count = (argc > 4) ? simple_strtoul(argv[4], NULL, 16) : 1; + + if ((argc < 4) || (strlen(argv[3]) % 4)) { + cmd_usage(cmdtp); + return 1; + } + + x = simple_strtoul(argv[1], NULL, 16); + y = simple_strtoul(argv[2], NULL, 16); + rp = argv[3]; + + + while (*rp) { + char substr[5]; + + memcpy(substr, rp, 4); + substr[4] = 0; + *wp = simple_strtoul(substr, NULL, 16); + + rp += 4; + wp++; + if (wp - buffer > BASE_WIDTH) + break; + } + + for (k = 0; k < count; ++k) { + unsigned offset = y * BASE_WIDTH + x + k * (wp - buffer); + osd_write_videomem(offset, buffer, wp - buffer); + } + + return 0; +} + +U_BOOT_CMD( + osdw, 5, 0, osd_write, + "write 16-bit hex encoded buffer to osd memory", + "pos_x pos_y buffer count\n" +); + +U_BOOT_CMD( + osdp, 5, 0, osd_print, + "write ASCII buffer to osd memory", + "pos_x pos_y color text\n" +); diff --git a/board/gdsys/common/osd.h b/board/gdsys/common/osd.h new file mode 100644 index 00000000000..4431cbc091c --- /dev/null +++ b/board/gdsys/common/osd.h @@ -0,0 +1,29 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OSD_H_ +#define _OSD_H_ + +int osd_probe(void); + +#endif diff --git a/boards.cfg b/boards.cfg index 4efbff85fd4..288d0325281 100644 --- a/boards.cfg +++ b/boards.cfg @@ -642,6 +642,8 @@ CPCI405AB powerpc ppc4xx cpci405 esd CPCI405DT powerpc ppc4xx cpci405 esd dlvision powerpc ppc4xx - gdsys gdppc440etx powerpc ppc4xx - gdsys +io powerpc ppc4xx 405ep gdsys +iocon powerpc ppc4xx 405ep gdsys CPCIISER4 powerpc ppc4xx cpciiser4 esd DASA_SIM powerpc ppc4xx dasa_sim esd PMC405DE powerpc ppc4xx pmc405de esd diff --git a/include/configs/io.h b/include/configs/io.h new file mode 100644 index 00000000000..a66c7043611 --- /dev/null +++ b/include/configs/io.h @@ -0,0 +1,251 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_405EP 1 /* this is a PPC405 CPU */ +#define CONFIG_4xx 1 /* member of PPC4xx family */ +#define CONFIG_IO 1 /* on a Io board */ + +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + +/* + * Include common defines/options for all AMCC eval boards + */ +#define CONFIG_HOSTNAME io +#define CONFIG_IDENT_STRING " io 0.04" +#include "amcc-common.h" + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */ +#define CONFIG_LAST_STAGE_INIT /* call last_stage_init */ + +#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ + +/* + * Configure PLL + */ +#define PLLMR0_DEFAULT PLLMR0_266_133_66 +#define PLLMR1_DEFAULT PLLMR1_266_133_66 + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ + +/* + * Default environment variables + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_AMCC_DEF_ENV \ + CONFIG_AMCC_DEF_ENV_POWERPC \ + CONFIG_AMCC_DEF_ENV_NOR_UPD \ + "kernel_addr=fc000000\0" \ + "fdt_addr=fc1e0000\0" \ + "ramdisk_addr=fc200000\0" \ + "" + +#define CONFIG_PHY_ADDR 4 /* PHY address */ +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#define CONFIG_PHY1_ADDR 0xc /* EMAC1 PHY address */ +#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ + +/* + * Commands additional to the ones defined in amcc-common.h + */ +#define CONFIG_CMD_CACHE +#undef CONFIG_CMD_EEPROM + +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ + +/* SDRAM timings used in datasheet */ +#define CONFIG_SYS_SDRAM_CL 3 /* CAS latency */ +#define CONFIG_SYS_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CONFIG_SYS_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE period */ +#define CONFIG_SYS_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CONFIG_SYS_SDRAM_tRFC 66 /* Auto refresh period */ + +/* + * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1. + * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31. + * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD. + * The Linux BASE_BAUD define should match this configuration. + * baseBaud = cpuClock/(uartDivisor*16) + * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, + * set Linux BASE_BAUD to 403200. + */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#define CONFIG_SYS_BASE_BAUD 691200 + +/* + * I2C stuff + */ +#define CONFIG_SYS_I2C_SPEED 100000 + +/* Temp sensor/hwmon/dtt */ +#define CONFIG_DTT_LM63 1 /* National LM63 */ +#define CONFIG_DTT_SENSORS { 0 } /* Sensor addresses */ +#define CONFIG_DTT_PWM_LOOKUPTABLE \ + { { 40, 10 }, { 50, 20 }, { 60, 40 } } +#define CONFIG_DTT_TACH_LIMIT 0xa10 + +/* + * FLASH organization + */ +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CONFIG_SYS_FLASH_BASE 0xFC000000 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors per chip*/ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */ + +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */ +#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */ + +#ifdef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#endif + +/* Gbit PHYs */ +#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ +#define CONFIG_BITBANGMII_MULTI + +#define CONFIG_SYS_MDIO_PIN (0x80000000 >> 13) /* our MDIO is GPIO0 */ +#define CONFIG_SYS_MDC_PIN (0x80000000 >> 7) /* our MDC is GPIO7 */ + +#define CONFIG_SYS_GBIT_MII_BUSNAME "io_miiphy" + +/* + * PPC405 GPIO Configuration + */ +#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 */ \ +{ \ +/* GPIO Core 0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO7 TS5 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \ +} \ +} + +/* + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +#define CONFIG_SYS_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 +#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */ +#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */ + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size/bytes res'd for init data*/ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CONFIG_SYS_EBC_PB0AP 0xa382a880 +/* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit */ +#define CONFIG_SYS_EBC_PB0CR 0xFC0DA000 + +/* Memory Bank 1 (NVRAM) initializatio */ +#define CONFIG_SYS_EBC_PB1AP 0x92015480 +/* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit */ +#define CONFIG_SYS_EBC_PB1CR 0x7f318000 + +/* Memory Bank 2 (FPGA) initialization */ +#define CONFIG_SYS_FPGA_BASE 0x7f100000 +#define CONFIG_SYS_EBC_PB2AP 0x02025080 +/* BAS=0x7f1,BS=1MB,BU=R/W,BW=16bit */ +#define CONFIG_SYS_EBC_PB2CR 0x7f11a000 + +#define CONFIG_SYS_FPGA_RFL_LOW 0x0000 +#define CONFIG_SYS_FPGA_RFL_HIGH 0x3ffe + +/* Memory Bank 3 (Latches) initialization */ +#define CONFIG_SYS_LATCH_BASE 0x7f200000 +#define CONFIG_SYS_EBC_PB3AP 0xa2015480 +/* BAS=0x7f2,BS=1MB,BU=R/W,BW=16bit */ +#define CONFIG_SYS_EBC_PB3CR 0x7f21a000 + +#define CONFIG_SYS_LATCH0_RESET 0xffff +#define CONFIG_SYS_LATCH0_BOOT 0xffff +#define CONFIG_SYS_LATCH1_RESET 0xffbf +#define CONFIG_SYS_LATCH1_BOOT 0xffff + +#endif /* __CONFIG_H */ diff --git a/include/configs/iocon.h b/include/configs/iocon.h new file mode 100644 index 00000000000..5e61b11372a --- /dev/null +++ b/include/configs/iocon.h @@ -0,0 +1,252 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_405EP 1 /* this is a PPC405 CPU */ +#define CONFIG_4xx 1 /* member of PPC4xx family */ +#define CONFIG_IOCON 1 /* on a IoCon board */ + +#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 + +/* + * Include common defines/options for all AMCC eval boards + */ +#define CONFIG_HOSTNAME iocon +#define CONFIG_IDENT_STRING " iocon 0.03" +#include "amcc-common.h" + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */ +#define CONFIG_LAST_STAGE_INIT + +#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ + +/* + * Configure PLL + */ +#define PLLMR0_DEFAULT PLLMR0_266_133_66 +#define PLLMR1_DEFAULT PLLMR1_266_133_66 + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ + +/* + * Default environment variables + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_AMCC_DEF_ENV \ + CONFIG_AMCC_DEF_ENV_POWERPC \ + CONFIG_AMCC_DEF_ENV_NOR_UPD \ + "kernel_addr=fc000000\0" \ + "fdt_addr=fc1e0000\0" \ + "ramdisk_addr=fc200000\0" \ + "" + +#define CONFIG_PHY_ADDR 4 /* PHY address */ +#define CONFIG_HAS_ETH0 +#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ + +/* + * Commands additional to the ones defined in amcc-common.h + */ +#define CONFIG_CMD_CACHE +#undef CONFIG_CMD_EEPROM + +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ + +/* SDRAM timings used in datasheet */ +#define CONFIG_SYS_SDRAM_CL 3 /* CAS latency */ +#define CONFIG_SYS_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CONFIG_SYS_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE period */ +#define CONFIG_SYS_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CONFIG_SYS_SDRAM_tRFC 66 /* Auto refresh period */ + +/* + * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1. + * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31. + * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD. + * The Linux BASE_BAUD define should match this configuration. + * baseBaud = cpuClock/(uartDivisor*16) + * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, + * set Linux BASE_BAUD to 403200. + */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#define CONFIG_SYS_BASE_BAUD 691200 + +/* + * I2C stuff + */ +#define CONFIG_SYS_I2C_SPEED 400000 + +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ + +/* + * Software (bit-bang) I2C driver configuration + */ + +#ifndef __ASSEMBLY__ +void fpga_gpio_set(int pin); +void fpga_gpio_clear(int pin); +int fpga_gpio_get(int pin); +#endif + +#define I2C_ACTIVE { } +#define I2C_TRISTATE { } +#define I2C_READ fpga_gpio_get(0x0040) ? 1 : 0 +#define I2C_SDA(bit) if (bit) fpga_gpio_set(0x0040); \ + else fpga_gpio_clear(0x0040) +#define I2C_SCL(bit) if (bit) fpga_gpio_set(0x0020); \ + else fpga_gpio_clear(0x0020) +#define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */ + +/* + * FLASH organization + */ +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CONFIG_SYS_FLASH_BASE 0xFC000000 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors per chip*/ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */ + +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */ +#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */ + +#ifdef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#endif + +/* + * PPC405 GPIO Configuration + */ +#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 */ \ +{ \ +/* GPIO Core 0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \ +} \ +} + +/* + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +#define CONFIG_SYS_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 +#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */ +#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */ + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size/bytes res'd for init data*/ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CONFIG_SYS_EBC_PB0AP 0xa382a880 +#define CONFIG_SYS_EBC_PB0CR 0xFC0DA000 + +/* Memory Bank 1 (NVRAM) initializatio */ +#define CONFIG_SYS_EBC_PB1AP 0x92015480 +#define CONFIG_SYS_EBC_PB1CR 0xFB858000 + +/* Memory Bank 2 (FPGA) initialization */ +#define CONFIG_SYS_FPGA_BASE 0x7f100000 +#define CONFIG_SYS_EBC_PB2AP 0x02825080 +#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FPGA_BASE | 0x1a000) + +#define CONFIG_SYS_FPGA_RFL_LOW 0x0000 +#define CONFIG_SYS_FPGA_RFL_HIGH 0x00fe + +/* Memory Bank 3 (Latches) initialization */ +#define CONFIG_SYS_LATCH_BASE 0x7f200000 +#define CONFIG_SYS_EBC_PB3AP 0x02025080 +#define CONFIG_SYS_EBC_PB3CR 0x7f21a000 + +#define CONFIG_SYS_LATCH0_RESET 0xffef +#define CONFIG_SYS_LATCH0_BOOT 0xffff +#define CONFIG_SYS_LATCH1_RESET 0xffff +#define CONFIG_SYS_LATCH1_BOOT 0xffff + +#endif /* __CONFIG_H */ From 36cf8cb456203886feb7d458f095a9aa49b2f9e9 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 19 Oct 2010 02:41:26 -0400 Subject: [PATCH 078/116] Blackfin: bf527-ezkit-v2: move to boards.cfg Now that the boards.cfg file supports options to mkconfig, we can move the bf527-ezkit-v2 target out of the Makefile and into boards.cfg. Signed-off-by: Mike Frysinger --- MAKEALL | 4 +--- Makefile | 8 -------- boards.cfg | 1 + 3 files changed, 2 insertions(+), 11 deletions(-) diff --git a/MAKEALL b/MAKEALL index 8ad7e922203..db11f134b8b 100755 --- a/MAKEALL +++ b/MAKEALL @@ -599,9 +599,7 @@ LIST_avr32="$(boards_by_arch avr32)" ## Blackfin Systems ######################################################################### -LIST_blackfin="$(boards_by_arch blackfin) - bf527-ezkit-v2 -" +LIST_blackfin="$(boards_by_arch blackfin)" ######################################################################### ## SH Systems diff --git a/Makefile b/Makefile index f8e13d782ad..f9f83eb12f3 100644 --- a/Makefile +++ b/Makefile @@ -1176,14 +1176,6 @@ NIOS2_GENERIC = nios2-generic $(NIOS2_GENERIC:%=%_config) : unconfig @$(MKCONFIG) $@ nios2 nios2 nios2-generic altera -#======================================================================== -# Blackfin -#======================================================================== - -bf527-ezkit-v2_config : unconfig - @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \ - bf527-ezkit blackfin blackfin bf527-ezkit - ######################################################################### ######################################################################### diff --git a/boards.cfg b/boards.cfg index 4efbff85fd4..2bbcd8ddec4 100644 --- a/boards.cfg +++ b/boards.cfg @@ -413,6 +413,7 @@ bct-brettl2 blackfin blackfin bf518f-ezbrd blackfin blackfin bf526-ezbrd blackfin blackfin bf527-ezkit blackfin blackfin +bf527-ezkit-v2 blackfin blackfin bf527-ezkit - - bf527-ezkit:BF527_EZKIT_REV_2_1 bf527-sdp blackfin blackfin bf533-ezkit blackfin blackfin bf533-stamp blackfin blackfin From 58d7570cd3c5e9b215b6358f293872b66ac2a1cb Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 19 Oct 2010 18:02:43 -0400 Subject: [PATCH 079/116] Blackfin: adi boards: set compiled size limits Signed-off-by: Mike Frysinger --- include/configs/bf548-ezkit.h | 1 + include/configs/bfin_adi_common.h | 3 +++ 2 files changed, 4 insertions(+) diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index 4412177ff09..1c035cfcada 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -180,6 +180,7 @@ * Misc Settings */ #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_SIZE_LIMIT $$(( 512 * 1024 )) #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 #define CONFIG_BFIN_SPI_IMG_SIZE 0x50000 diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 608788a66f9..03c64339d62 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -295,6 +295,9 @@ /* * Misc Settings */ +#ifndef CONFIG_BOARD_SIZE_LIMIT +# define CONFIG_BOARD_SIZE_LIMIT $$(( 256 * 1024 )) +#endif #define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */ #define CONFIG_LZMA From 8c0c2b905078b9733a3830f108dca7bfab41d369 Mon Sep 17 00:00:00 2001 From: Gray Remlin Date: Sun, 24 Oct 2010 16:18:31 +0100 Subject: [PATCH 080/116] ARM: Use consistent assembler syntax Signed-off-by: Gray Remlin Acked-by: Heiko Schocher --- arch/arm/cpu/arm1136/start.S | 10 +++++----- arch/arm/cpu/arm926ejs/start.S | 10 +++++----- arch/arm/cpu/armv7/start.S | 10 +++++----- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 29ed065c011..1d4637d5063 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -237,13 +237,13 @@ copy_loop: ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r9 /* r0 <- location to fix up in RAM */ + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + cmp r8, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r8, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -260,7 +260,7 @@ fixrel: add r1, r1, r9 fixnext: str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 ble fixloop #endif diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 863de3ba0fc..e1c1508fb3f 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -225,13 +225,13 @@ copy_loop: ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r9 /* r0 <- location to fix up in RAM */ + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + cmp r8, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r8, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -248,7 +248,7 @@ fixrel: add r1, r1, r9 fixnext: str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop #endif diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 64c86e97690..ef6c32d137b 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -224,13 +224,13 @@ copy_loop: ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r9 /* r0 <- location to fix up in RAM */ + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + cmp r8, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r8, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -247,7 +247,7 @@ fixrel: add r1, r1, r9 fixnext: str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop From 553f09823cced77296825f615f00321d932bf914 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 26 Oct 2010 13:32:32 +0200 Subject: [PATCH 081/116] Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_INIT_RAM_END was a misnomer as it suggests this might be some end address; to make the meaning more clear we rename it into CONFIG_SYS_INIT_RAM_SIZE No other code changes are performed in this patch, only minor editing of white space (due to the changed length) and the comments was done, where noticed. Note that the code for the PATI and cmi_mpc5xx board configurations looks seriously broken. Last known maintainers on Cc: Signed-off-by: Wolfgang Denk Cc: Denis Peter Cc: Martin Winistoerfer Acked-by: Kumar Gala --- README | 2 +- arch/m68k/lib/board.c | 2 +- arch/powerpc/cpu/74xx_7xx/start.S | 4 ++-- arch/powerpc/cpu/mpc83xx/start.S | 4 ++-- arch/powerpc/cpu/mpc86xx/start.S | 4 ++-- arch/powerpc/cpu/ppc4xx/start.S | 22 +++++++++++----------- board/fads/fads.h | 4 ++-- include/configs/A3000.h | 4 ++-- include/configs/ADCIOP.h | 4 ++-- include/configs/AMX860.h | 4 ++-- include/configs/AP1000.h | 4 ++-- include/configs/APC405.h | 4 ++-- include/configs/AR405.h | 4 ++-- include/configs/ASH405.h | 4 ++-- include/configs/ATUM8548.h | 4 ++-- include/configs/Adder.h | 4 ++-- include/configs/Alaska8220.h | 4 ++-- include/configs/BAB7xx.h | 4 ++-- include/configs/BC3450.h | 6 +++--- include/configs/BMW.h | 4 ++-- include/configs/CANBT.h | 4 ++-- include/configs/CATcenter.h | 4 ++-- include/configs/CMS700.h | 4 ++-- include/configs/CPC45.h | 4 ++-- include/configs/CPCI2DP.h | 4 ++-- include/configs/CPCI405.h | 4 ++-- include/configs/CPCI4052.h | 4 ++-- include/configs/CPCI405AB.h | 4 ++-- include/configs/CPCI405DT.h | 4 ++-- include/configs/CPCI750.h | 4 ++-- include/configs/CPCIISER4.h | 4 ++-- include/configs/CPU86.h | 4 ++-- include/configs/CPU87.h | 4 ++-- include/configs/CRAYL1.h | 8 ++++---- include/configs/CU824.h | 4 ++-- include/configs/DASA_SIM.h | 4 ++-- include/configs/DB64360.h | 4 ++-- include/configs/DB64460.h | 4 ++-- include/configs/DP405.h | 4 ++-- include/configs/DU405.h | 4 ++-- include/configs/DU440.h | 4 ++-- include/configs/EB+MCF-EV123.h | 8 ++++---- include/configs/ELPPC.h | 4 ++-- include/configs/ELPT860.h | 4 ++-- include/configs/EP88x.h | 4 ++-- include/configs/ERIC.h | 4 ++-- include/configs/ESTEEM192E.h | 4 ++-- include/configs/ETX094.h | 4 ++-- include/configs/EVB64260.h | 4 ++-- include/configs/EXBITGEN.h | 4 ++-- include/configs/FADS823.h | 4 ++-- include/configs/FADS850SAR.h | 4 ++-- include/configs/FLAGADM.h | 4 ++-- include/configs/FPS850L.h | 4 ++-- include/configs/FPS860L.h | 4 ++-- include/configs/G2000.h | 4 ++-- include/configs/GEN860T.h | 4 ++-- include/configs/GENIETV.h | 4 ++-- include/configs/HH405.h | 4 ++-- include/configs/HIDDEN_DRAGON.h | 8 ++++---- include/configs/HUB405.h | 4 ++-- include/configs/IAD210.h | 4 ++-- include/configs/ICU862.h | 4 ++-- include/configs/IDS8247.h | 4 ++-- include/configs/IP860.h | 4 ++-- include/configs/IPHASE4539.h | 4 ++-- include/configs/ISPAN.h | 4 ++-- include/configs/IVML24.h | 8 ++++---- include/configs/IVMS8.h | 8 ++++---- include/configs/IceCube.h | 4 ++-- include/configs/JSE.h | 4 ++-- include/configs/KAREF.h | 4 ++-- include/configs/KUP4K.h | 4 ++-- include/configs/KUP4X.h | 4 ++-- include/configs/LANTEC.h | 4 ++-- include/configs/M5208EVBE.h | 8 ++++---- include/configs/M52277EVB.h | 10 +++++----- include/configs/M5235EVB.h | 8 ++++---- include/configs/M5249EVB.h | 8 ++++---- include/configs/M5253DEMO.h | 8 ++++---- include/configs/M5253EVBE.h | 8 ++++---- include/configs/M5271EVB.h | 8 ++++---- include/configs/M5272C3.h | 8 ++++---- include/configs/M5275EVB.h | 8 ++++---- include/configs/M5282EVB.h | 8 ++++---- include/configs/M53017EVB.h | 8 ++++---- include/configs/M5329EVB.h | 8 ++++---- include/configs/M5373EVB.h | 8 ++++---- include/configs/M54451EVB.h | 10 +++++----- include/configs/M54455EVB.h | 10 +++++----- include/configs/M5475EVB.h | 10 +++++----- include/configs/M5485EVB.h | 10 +++++----- include/configs/MBX.h | 4 ++-- include/configs/MBX860T.h | 4 ++-- include/configs/METROBOX.h | 4 ++-- include/configs/MHPC.h | 4 ++-- include/configs/MIP405.h | 4 ++-- include/configs/ML2.h | 4 ++-- include/configs/MOUSSE.h | 4 ++-- include/configs/MPC8260ADS.h | 4 ++-- include/configs/MPC8266ADS.h | 4 ++-- include/configs/MPC8308RDB.h | 4 ++-- include/configs/MPC8313ERDB.h | 4 ++-- include/configs/MPC8315ERDB.h | 4 ++-- include/configs/MPC8323ERDB.h | 4 ++-- include/configs/MPC832XEMDS.h | 4 ++-- include/configs/MPC8349EMDS.h | 4 ++-- include/configs/MPC8349ITX.h | 4 ++-- include/configs/MPC8360EMDS.h | 4 ++-- include/configs/MPC8360ERDK.h | 4 ++-- include/configs/MPC837XEMDS.h | 4 ++-- include/configs/MPC837XERDB.h | 4 ++-- include/configs/MPC8536DS.h | 4 ++-- include/configs/MPC8540ADS.h | 4 ++-- include/configs/MPC8540EVAL.h | 4 ++-- include/configs/MPC8541CDS.h | 4 ++-- include/configs/MPC8544DS.h | 4 ++-- include/configs/MPC8548CDS.h | 4 ++-- include/configs/MPC8555CDS.h | 4 ++-- include/configs/MPC8560ADS.h | 4 ++-- include/configs/MPC8568MDS.h | 4 ++-- include/configs/MPC8569MDS.h | 4 ++-- include/configs/MPC8572DS.h | 4 ++-- include/configs/MPC8610HPCD.h | 4 ++-- include/configs/MPC8641HPCN.h | 4 ++-- include/configs/MUSENKI.h | 4 ++-- include/configs/MVBC_P.h | 4 ++-- include/configs/MVBLM7.h | 4 ++-- include/configs/MVBLUE.h | 4 ++-- include/configs/MVS1.h | 4 ++-- include/configs/MVSMR.h | 4 ++-- include/configs/NETPHONE.h | 4 ++-- include/configs/NETTA.h | 4 ++-- include/configs/NETTA2.h | 4 ++-- include/configs/NETVIA.h | 4 ++-- include/configs/NSCU.h | 4 ++-- include/configs/NX823.h | 4 ++-- include/configs/OCRTC.h | 4 ++-- include/configs/ORSG.h | 4 ++-- include/configs/OXC.h | 4 ++-- include/configs/P1022DS.h | 4 ++-- include/configs/P1_P2_RDB.h | 4 ++-- include/configs/P2020DS.h | 4 ++-- include/configs/P3G4.h | 4 ++-- include/configs/PATI.h | 4 ++-- include/configs/PCI405.h | 4 ++-- include/configs/PCIPPC2.h | 4 ++-- include/configs/PCIPPC6.h | 4 ++-- include/configs/PIP405.h | 4 ++-- include/configs/PLU405.h | 4 ++-- include/configs/PM520.h | 4 ++-- include/configs/PM826.h | 4 ++-- include/configs/PM828.h | 4 ++-- include/configs/PM854.h | 4 ++-- include/configs/PM856.h | 4 ++-- include/configs/PMC405.h | 4 ++-- include/configs/PMC405DE.h | 4 ++-- include/configs/PMC440.h | 4 ++-- include/configs/PN62.h | 4 ++-- include/configs/PPChameleonEVB.h | 4 ++-- include/configs/QS823.h | 4 ++-- include/configs/QS850.h | 4 ++-- include/configs/QS860T.h | 4 ++-- include/configs/R360MPI.h | 4 ++-- include/configs/RBC823.h | 4 ++-- include/configs/RPXClassic.h | 4 ++-- include/configs/RPXlite.h | 4 ++-- include/configs/RPXlite_DW.h | 4 ++-- include/configs/RPXsuper.h | 4 ++-- include/configs/RRvision.h | 4 ++-- include/configs/Rattler.h | 4 ++-- include/configs/SBC8540.h | 4 ++-- include/configs/SCM.h | 4 ++-- include/configs/SIMPC8313.h | 4 ++-- include/configs/SM850.h | 4 ++-- include/configs/SPD823TS.h | 4 ++-- include/configs/SXNI855T.h | 4 ++-- include/configs/Sandpoint8240.h | 8 ++++---- include/configs/Sandpoint8245.h | 8 ++++---- include/configs/TASREG.h | 8 ++++---- include/configs/TB5200.h | 6 +++--- include/configs/TK885D.h | 4 ++-- include/configs/TOP5200.h | 4 ++-- include/configs/TOP860.h | 4 ++-- include/configs/TQM5200.h | 6 +++--- include/configs/TQM823L.h | 4 ++-- include/configs/TQM823M.h | 4 ++-- include/configs/TQM8260.h | 4 ++-- include/configs/TQM8272.h | 4 ++-- include/configs/TQM834x.h | 4 ++-- include/configs/TQM850L.h | 4 ++-- include/configs/TQM850M.h | 4 ++-- include/configs/TQM855L.h | 4 ++-- include/configs/TQM855M.h | 4 ++-- include/configs/TQM85xx.h | 4 ++-- include/configs/TQM860L.h | 4 ++-- include/configs/TQM860M.h | 4 ++-- include/configs/TQM862L.h | 4 ++-- include/configs/TQM862M.h | 4 ++-- include/configs/TQM866M.h | 4 ++-- include/configs/TQM885D.h | 4 ++-- include/configs/Total5200.h | 4 ++-- include/configs/VOH405.h | 4 ++-- include/configs/VOM405.h | 4 ++-- include/configs/VoVPN-GW.h | 4 ++-- include/configs/W7OLMC.h | 4 ++-- include/configs/W7OLMG.h | 4 ++-- include/configs/WUH405.h | 4 ++-- include/configs/Yukon8220.h | 4 ++-- include/configs/ZPC1900.h | 4 ++-- include/configs/ZUMA.h | 4 ++-- include/configs/a4m072.h | 4 ++-- include/configs/acadia.h | 4 ++-- include/configs/aev.h | 6 +++--- include/configs/alpr.h | 4 ++-- include/configs/aria.h | 4 ++-- include/configs/astro_mcf5373l.h | 8 ++++---- include/configs/atc.h | 4 ++-- include/configs/bamboo.h | 4 ++-- include/configs/barco.h | 8 ++++---- include/configs/bluestone.h | 4 ++-- include/configs/bubinga.h | 4 ++-- include/configs/c2mon.h | 4 ++-- include/configs/ca9x4_ct_vxp.h | 4 ++-- include/configs/canmb.h | 4 ++-- include/configs/canyonlands.h | 4 ++-- include/configs/cm5200.h | 6 +++--- include/configs/cmi_mpc5xx.h | 4 ++-- include/configs/cobra5272.h | 8 ++++---- include/configs/cogent_mpc8260.h | 4 ++-- include/configs/cogent_mpc8xx.h | 4 ++-- include/configs/corenet_ds.h | 4 ++-- include/configs/cpci5200.h | 4 ++-- include/configs/csb272.h | 4 ++-- include/configs/csb472.h | 4 ++-- include/configs/debris.h | 8 ++++---- include/configs/digsy_mtc.h | 4 ++-- include/configs/dlvision.h | 4 ++-- include/configs/eXalion.h | 6 +++--- include/configs/ebony.h | 4 ++-- include/configs/ep8248.h | 4 ++-- include/configs/ep8260.h | 4 ++-- include/configs/ep82xxm.h | 4 ++-- include/configs/galaxy5200.h | 4 ++-- include/configs/gdppc440etx.h | 4 ++-- include/configs/gw8260.h | 4 ++-- include/configs/hcu4.h | 4 ++-- include/configs/hcu5.h | 4 ++-- include/configs/hermes.h | 4 ++-- include/configs/hmi1001.h | 6 +++--- include/configs/hymod.h | 4 ++-- include/configs/icon.h | 4 ++-- include/configs/idmr.h | 8 ++++---- include/configs/imx31_litekit.h | 4 ++-- include/configs/inka4x0.h | 6 +++--- include/configs/intip.h | 4 ++-- include/configs/ipek01.h | 4 ++-- include/configs/jupiter.h | 4 ++-- include/configs/katmai.h | 4 ++-- include/configs/kilauea.h | 4 ++-- include/configs/km8xx.h | 4 ++-- include/configs/kmeter1.h | 4 ++-- include/configs/korat.h | 4 ++-- include/configs/kvme080.h | 4 ++-- include/configs/linkstation.h | 4 ++-- include/configs/luan.h | 4 ++-- include/configs/lwmon.h | 4 ++-- include/configs/lwmon5.h | 4 ++-- include/configs/makalu.h | 4 ++-- include/configs/manroland/mpc5200-common.h | 6 +++--- include/configs/mcc200.h | 4 ++-- include/configs/mcu25.h | 4 ++-- include/configs/mecp5123.h | 4 ++-- include/configs/mecp5200.h | 4 ++-- include/configs/mgcoge.h | 4 ++-- include/configs/motionpro.h | 4 ++-- include/configs/mpc5121-common.h | 4 ++-- include/configs/mpc5121ads.h | 4 ++-- include/configs/mpc7448hpc2.h | 4 ++-- include/configs/mpc8308_p1m.h | 4 ++-- include/configs/muas3001.h | 4 ++-- include/configs/munices.h | 4 ++-- include/configs/neo.h | 4 ++-- include/configs/o2dnt.h | 4 ++-- include/configs/ocotea.h | 4 ++-- include/configs/p3mx.h | 4 ++-- include/configs/p3p440.h | 4 ++-- include/configs/pcm030.h | 4 ++-- include/configs/pcs440ep.h | 4 ++-- include/configs/pf5200.h | 4 ++-- include/configs/ppmc7xx.h | 6 +++--- include/configs/ppmc8260.h | 4 ++-- include/configs/qong.h | 4 ++-- include/configs/quad100hd.h | 4 ++-- include/configs/quantum.h | 4 ++-- include/configs/redwood.h | 4 ++-- include/configs/rmu.h | 4 ++-- include/configs/rsdproto.h | 4 ++-- include/configs/sacsng.h | 4 ++-- include/configs/sbc405.h | 4 ++-- include/configs/sbc8240.h | 4 ++-- include/configs/sbc8260.h | 4 ++-- include/configs/sbc8349.h | 4 ++-- include/configs/sbc8548.h | 4 ++-- include/configs/sbc8560.h | 4 ++-- include/configs/sbc8641d.h | 4 ++-- include/configs/sc3.h | 6 +++--- include/configs/sequoia.h | 4 ++-- include/configs/socrates.h | 4 ++-- include/configs/sorcery.h | 4 ++-- include/configs/spc1920.h | 4 ++-- include/configs/spieval.h | 6 +++--- include/configs/stxgp3.h | 4 ++-- include/configs/stxssa.h | 4 ++-- include/configs/stxxtc.h | 4 ++-- include/configs/svm_sc8xx.h | 4 ++-- include/configs/t3corp.h | 4 ++-- include/configs/taihu.h | 4 ++-- include/configs/taishan.h | 4 ++-- include/configs/uc100.h | 4 ++-- include/configs/utx8245.h | 6 +++--- include/configs/v37.h | 4 ++-- include/configs/v38b.h | 4 ++-- include/configs/ve8313.h | 4 ++-- include/configs/virtlab2.h | 4 ++-- include/configs/vision2.h | 4 ++-- include/configs/vme8349.h | 4 ++-- include/configs/walnut.h | 4 ++-- include/configs/xilinx-ppc.h | 4 ++-- include/configs/xpedite1000.h | 4 ++-- include/configs/xpedite517x.h | 4 ++-- include/configs/xpedite520x.h | 4 ++-- include/configs/xpedite537x.h | 4 ++-- include/configs/xpedite550x.h | 4 ++-- include/configs/yosemite.h | 4 ++-- include/configs/yucca.h | 4 ++-- include/configs/zeus.h | 4 ++-- 337 files changed, 759 insertions(+), 759 deletions(-) diff --git a/README b/README index a507a1f434b..3d8742386c0 100644 --- a/README +++ b/README @@ -2686,7 +2686,7 @@ Low Level (hardware related) configuration options: area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial data is located at the end of the available space - (sometimes written as (CONFIG_SYS_INIT_RAM_END - + (sometimes written as (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE), and the initial stack is just below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) downward. diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 4541e244e12..976d5bf28af 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -341,7 +341,7 @@ board_init_f (ulong bootflag) bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */ #ifdef CONFIG_SYS_INIT_RAM_ADDR bd->bi_sramstart = CONFIG_SYS_INIT_RAM_ADDR; /* start of SRAM memory */ - bd->bi_sramsize = CONFIG_SYS_INIT_RAM_END; /* size of SRAM memory */ + bd->bi_sramsize = CONFIG_SYS_INIT_RAM_SIZE; /* size of SRAM memory */ #endif bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ diff --git a/arch/powerpc/cpu/74xx_7xx/start.S b/arch/powerpc/cpu/74xx_7xx/start.S index 573e6d08219..b4121df6122 100644 --- a/arch/powerpc/cpu/74xx_7xx/start.S +++ b/arch/powerpc/cpu/74xx_7xx/start.S @@ -819,7 +819,7 @@ lock_ram_in_cache: */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ + li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: @@ -840,7 +840,7 @@ unlock_ram_in_cache: /* invalidate the INIT_RAM section */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ + li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: icbi r0, r3 diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index 536604f4625..403fda4b960 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -1072,7 +1072,7 @@ lock_ram_in_cache: */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ + li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: @@ -1094,7 +1094,7 @@ unlock_ram_in_cache: /* invalidate the INIT_RAM section */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ + li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: icbi r0, r3 diff --git a/arch/powerpc/cpu/mpc86xx/start.S b/arch/powerpc/cpu/mpc86xx/start.S index 3817f19d535..36004b78589 100644 --- a/arch/powerpc/cpu/mpc86xx/start.S +++ b/arch/powerpc/cpu/mpc86xx/start.S @@ -870,7 +870,7 @@ lock_ram_in_cache: */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ + li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: @@ -905,7 +905,7 @@ unlock_ram_in_cache: /* invalidate the INIT_RAM section */ lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \ + li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: icbi r0, r3 diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index 87caea19b04..140bfc92087 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -182,8 +182,8 @@ # endif #endif /* CONFIG_SYS_INIT_DCACHE_CS */ -#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10))) -#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END! +#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_SIZE > (4 << 10))) +#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_SIZE! #endif /* @@ -656,8 +656,8 @@ _start: /* Clear Dcache to use as RAM */ addis r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l - addis r4,r0,CONFIG_SYS_INIT_RAM_END@h - ori r4,r4,CONFIG_SYS_INIT_RAM_END@l + addis r4,r0,CONFIG_SYS_INIT_RAM_SIZE@h + ori r4,r4,CONFIG_SYS_INIT_RAM_SIZE@l rlwinm. r5,r4,0,27,31 rlwinm r5,r4,27,5,31 beq ..d_ran @@ -1091,8 +1091,8 @@ _start: lis r3, CONFIG_SYS_INIT_RAM_ADDR@h ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l - lis r4, CONFIG_SYS_INIT_RAM_END@h - ori r4, r4, CONFIG_SYS_INIT_RAM_END@l + lis r4, CONFIG_SYS_INIT_RAM_SIZE@h + ori r4, r4, CONFIG_SYS_INIT_RAM_SIZE@l /* * Convert the size, in bytes, to the number of cache lines/blocks @@ -1119,12 +1119,12 @@ _start: lis r1, CONFIG_SYS_INIT_RAM_ADDR@h ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l - lis r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h - ori r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l + lis r4, (CONFIG_SYS_INIT_RAM_SIZE >> 2)@h + ori r4, r4, (CONFIG_SYS_INIT_RAM_SIZE >> 2)@l mtctr r4 lis r2, CONFIG_SYS_INIT_RAM_ADDR@h - ori r2, r2, CONFIG_SYS_INIT_RAM_END@l + ori r2, r2, CONFIG_SYS_INIT_RAM_SIZE@l lis r4, CONFIG_SYS_INIT_RAM_PATTERN@h ori r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l @@ -1414,8 +1414,8 @@ relocate_code: lis r3, CONFIG_SYS_INIT_RAM_ADDR@h ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l - lis r4, CONFIG_SYS_INIT_RAM_END@h - ori r4, r4, CONFIG_SYS_INIT_RAM_END@l + lis r4, CONFIG_SYS_INIT_RAM_SIZE@h + ori r4, r4, CONFIG_SYS_INIT_RAM_SIZE@l add r4, r4, r3 bl invalidate_dcache_range diff --git a/board/fads/fads.h b/board/fads/fads.h index 38abc70d4aa..08d4b791fcf 100644 --- a/board/fads/fads.h +++ b/board/fads/fads.h @@ -164,9 +164,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/A3000.h b/include/configs/A3000.h index 26d4d8a31cd..648aa0307f2 100644 --- a/include/configs/A3000.h +++ b/include/configs/A3000.h @@ -175,8 +175,8 @@ /*#define CONFIG_SYS_GBL_DATA_SIZE 256*/ #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* diff --git a/include/configs/ADCIOP.h b/include/configs/ADCIOP.h index 56109148cfe..c4bc1515609 100644 --- a/include/configs/ADCIOP.h +++ b/include/configs/ADCIOP.h @@ -114,9 +114,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END 0x0f00 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h index aa35cbca963..f5fa648ddb4 100644 --- a/include/configs/AMX860.h +++ b/include/configs/AMX860.h @@ -138,9 +138,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h index f1ae16c436a..31df89c82a9 100644 --- a/include/configs/AP1000.h +++ b/include/configs/AP1000.h @@ -209,9 +209,9 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x400000 /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/APC405.h b/include/configs/APC405.h index b846afcc0b5..af3223bdfef 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -420,9 +420,9 @@ #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved bytes for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* reserve some memory for BOOT limit info */ #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 16) diff --git a/include/configs/AR405.h b/include/configs/AR405.h index b4ff7188de5..1f7e79e92ec 100644 --- a/include/configs/AR405.h +++ b/include/configs/AR405.h @@ -266,9 +266,9 @@ #define CONFIG_SYS_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 480051b16bd..a818070a4be 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -324,10 +324,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h index dda6baa7ff6..261aff1fc9c 100644 --- a/include/configs/ATUM8548.h +++ b/include/configs/ATUM8548.h @@ -191,12 +191,12 @@ /* Memory */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/Adder.h b/include/configs/Adder.h index a1c530b71b4..71e36c69be7 100644 --- a/include/configs/Adder.h +++ b/include/configs/Adder.h @@ -170,9 +170,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h index b5c904987b8..7ede3186c4c 100644 --- a/include/configs/Alaska8220.h +++ b/include/configs/Alaska8220.h @@ -246,10 +246,10 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h index 9250ef3d4cd..c557197fed1 100644 --- a/include/configs/BAB7xx.h +++ b/include/configs/BAB7xx.h @@ -199,9 +199,9 @@ * Definitions for initial stack pointer and data area */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index d0517043cb0..563da6883e7 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -384,13 +384,13 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #ifdef CONFIG_POST /* preserve space for the post_word at end of on-chip SRAM */ -# define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +# define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE #else -# define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +# define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif /*CONFIG_POST*/ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* Bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/BMW.h b/include/configs/BMW.h index 7d928eb6d5f..234cc2051fb 100644 --- a/include/configs/BMW.h +++ b/include/configs/BMW.h @@ -150,9 +150,9 @@ * Definitions for initial stack pointer and data area */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h index 9c55805f135..d67b659e46d 100644 --- a/include/configs/CANBT.h +++ b/include/configs/CANBT.h @@ -223,9 +223,9 @@ * Definitions for initial stack pointer and data area (in RAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00ef0000 /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END 0x0f00 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index ad36a14c6d0..7442e3cd4d0 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -514,10 +514,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 3e973f2cc02..34478bbdc90 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -286,10 +286,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index 486a4e0535c..8502542fe2e 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -156,8 +156,8 @@ #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * NS16550 Configuration diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index e4d8f9c5f9a..b5edc03e775 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -259,9 +259,9 @@ #define CONFIG_SYS_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 6b2986de896..df45b12af67 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -335,9 +335,9 @@ #else #define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */ #endif -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 908b872e60b..9a4e5f89e40 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -396,9 +396,9 @@ #define CONFIG_SYS_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index a2b8d7235e5..fb14cd3bad5 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -388,9 +388,9 @@ #define CONFIG_SYS_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 7fea5e315e6..70af2da7d9b 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -391,9 +391,9 @@ #define CONFIG_SYS_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index 37341cbb990..76172eb2dc5 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -266,9 +266,9 @@ /* #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000*/ /* unused memory region */ /* #define CONFIG_SYS_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */ #define CONFIG_SYS_INIT_RAM_ADDR 0xf1080000 /* unused memory region */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define RELOCATE_INTERNAL_RAM_ADDR #ifdef RELOCATE_INTERNAL_RAM_ADDR diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index 5aff74c9d09..f9badc0f77b 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -249,9 +249,9 @@ */ #define CONFIG_SYS_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h index 233d36b6d67..7662b52607c 100644 --- a/include/configs/CPU86.h +++ b/include/configs/CPU86.h @@ -296,9 +296,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index 560e4491ab1..18fdb905565 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -311,9 +311,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index 6ababa1c500..146540a1ee6 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -228,17 +228,17 @@ #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #else #define CONFIG_SYS_OCM_DATA_ADDR 0xF0000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of On Chip SRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of On Chip SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of On Chip SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif diff --git a/include/configs/CU824.h b/include/configs/CU824.h index 8e19aeb35cb..14970e01d36 100644 --- a/include/configs/CU824.h +++ b/include/configs/CU824.h @@ -144,8 +144,8 @@ #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * NS16550 Configuration diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h index fc2727ef473..3d6b95afc66 100644 --- a/include/configs/DASA_SIM.h +++ b/include/configs/DASA_SIM.h @@ -115,9 +115,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END 0x0f00 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h index 26bb6490a60..ba5adda3b12 100644 --- a/include/configs/DB64360.h +++ b/include/configs/DB64360.h @@ -352,9 +352,9 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" */ #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* unused memory region */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define RELOCATE_INTERNAL_RAM_ADDR #ifdef RELOCATE_INTERNAL_RAM_ADDR diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h index 74312cd9550..6586f232e91 100644 --- a/include/configs/DB64460.h +++ b/include/configs/DB64460.h @@ -290,9 +290,9 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" */ #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* unused memory region */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define RELOCATE_INTERNAL_RAM_ADDR #ifdef RELOCATE_INTERNAL_RAM_ADDR diff --git a/include/configs/DP405.h b/include/configs/DP405.h index cb110e35ae7..2bf0799e8b3 100644 --- a/include/configs/DP405.h +++ b/include/configs/DP405.h @@ -228,10 +228,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/DU405.h b/include/configs/DU405.h index d99b8409375..bb03f235ba6 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -286,9 +286,9 @@ #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/DU440.h b/include/configs/DU440.h index e6e2b300caa..9146ad2a1c3 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -79,9 +79,9 @@ #define CONFIG_SYS_INIT_RAM_OCM 1 /* OCM as init ram */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index af57fb9662c..d722ae69122 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -153,10 +153,10 @@ *-----------------------------------------------------------------------*/ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_END 0x10000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 #define CONFIG_SYS_GBL_DATA_SIZE 64 #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -209,9 +209,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h index 7e940b8db4b..ae9bfc5d2fe 100644 --- a/include/configs/ELPPC.h +++ b/include/configs/ELPPC.h @@ -176,9 +176,9 @@ * Definitions for initial stack pointer and data area */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h index f38160a2ba9..28e396eeef5 100644 --- a/include/configs/ELPT860.h +++ b/include/configs/ELPT860.h @@ -169,9 +169,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h index ec1cc4eb117..fbc3f25b466 100644 --- a/include/configs/EP88x.h +++ b/include/configs/EP88x.h @@ -171,9 +171,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h index 42465da9b24..4e05e8f05f7 100644 --- a/include/configs/ERIC.h +++ b/include/configs/ERIC.h @@ -352,9 +352,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END 0x0f00 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ESTEEM192E.h b/include/configs/ESTEEM192E.h index d5a3cd3d76d..21d995f1b33 100644 --- a/include/configs/ESTEEM192E.h +++ b/include/configs/ESTEEM192E.h @@ -120,9 +120,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h index e890a973328..a9e7fa08ebe 100644 --- a/include/configs/ETX094.h +++ b/include/configs/ETX094.h @@ -138,9 +138,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h index d312811efd6..94ab1c93e67 100644 --- a/include/configs/EVB64260.h +++ b/include/configs/EVB64260.h @@ -162,9 +162,9 @@ * Definitions for initial stack pointer and data area */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_RAM_LOCK diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h index 1489d3001ba..286c38cd98f 100644 --- a/include/configs/EXBITGEN.h +++ b/include/configs/EXBITGEN.h @@ -200,9 +200,9 @@ /* Global info and initial stack */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h index 97958342bbb..dcffac2a160 100644 --- a/include/configs/FADS823.h +++ b/include/configs/FADS823.h @@ -170,9 +170,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h index 9e2b1a45485..e94474d2512 100644 --- a/include/configs/FADS850SAR.h +++ b/include/configs/FADS850SAR.h @@ -117,9 +117,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h index 12144cdb1a0..0471f8ffd6d 100644 --- a/include/configs/FLAGADM.h +++ b/include/configs/FLAGADM.h @@ -128,9 +128,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h index 1a3d2f8f22d..06b78eea291 100644 --- a/include/configs/FPS850L.h +++ b/include/configs/FPS850L.h @@ -167,9 +167,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h index 20e618fa4f5..90d5b463c81 100644 --- a/include/configs/FPS860L.h +++ b/include/configs/FPS860L.h @@ -167,9 +167,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/G2000.h b/include/configs/G2000.h index 00f27ccfb9f..6723c96e3dc 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -354,10 +354,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index 915aff3f1f9..68a0cfdf7f2 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -382,9 +382,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_INIT_DATA_SIZE 64 /* # bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h index dc925af6d5d..929b56e6ffe 100644 --- a/include/configs/GENIETV.h +++ b/include/configs/GENIETV.h @@ -161,9 +161,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 8a313240e20..4244a0453e9 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -450,10 +450,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h index 6cb19c5f70c..592f4d2bf33 100644 --- a/include/configs/HIDDEN_DRAGON.h +++ b/include/configs/HIDDEN_DRAGON.h @@ -126,9 +126,9 @@ #define CONFIG_SYS_MONITOR_BASE 0x00090000 #define CONFIG_SYS_RAMBOOT 1 #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_INIT_RAM_END 0x10000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 #define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #else #undef CONFIG_SYS_RAMBOOT @@ -138,8 +138,8 @@ #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #endif diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index 863204e426d..cc5a9b71f06 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -323,10 +323,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h index 56331770890..75e152cb0a4 100644 --- a/include/configs/IAD210.h +++ b/include/configs/IAD210.h @@ -183,9 +183,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h index 3fa6130c02d..3528d5daa94 100644 --- a/include/configs/ICU862.h +++ b/include/configs/ICU862.h @@ -187,9 +187,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index 1b90a6bf00c..d0f6952dd4b 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -293,9 +293,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IP860.h b/include/configs/IP860.h index df7ea9ac2e8..cbece32b349 100644 --- a/include/configs/IP860.h +++ b/include/configs/IP860.h @@ -151,9 +151,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h index 281d0bd3078..e19a3df5757 100644 --- a/include/configs/IPHASE4539.h +++ b/include/configs/IPHASE4539.h @@ -246,9 +246,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index e651658f324..e78ff0640f6 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -231,9 +231,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h index 6444bd19154..28a8ace2dd0 100644 --- a/include/configs/IVML24.h +++ b/include/configs/IVML24.h @@ -147,15 +147,15 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #if defined (CONFIG_IVML24_16M) -# define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +# define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #elif defined (CONFIG_IVML24_32M) -# define CONFIG_SYS_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ +# define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ #elif defined (CONFIG_IVML24_64M) -# define CONFIG_SYS_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ +# define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ #endif #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h index 1ebbc4521c0..16628ea9d62 100644 --- a/include/configs/IVMS8.h +++ b/include/configs/IVMS8.h @@ -143,15 +143,15 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #if defined (CONFIG_IVMS8_16M) -# define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +# define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #elif defined (CONFIG_IVMS8_32M) -# define CONFIG_SYS_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ +# define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ #elif defined (CONFIG_IVMS8_64M) -# define CONFIG_SYS_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ +# define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ #endif #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index f54a3937a0f..8584b34e25b 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -275,11 +275,11 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/JSE.h b/include/configs/JSE.h index 2a1cc5838fe..fb35ee6dc5d 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -59,10 +59,10 @@ /* ... place INIT RAM in the OCM address */ # define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* ... give it the whole init ram */ -# define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE +# define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* ... Shave a bit off the end for global data */ # define CONFIG_SYS_GBL_DATA_SIZE 128 -# define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +# define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* ... and place the stack pointer at the top of what's left. */ # define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 46b91754849..82b79c93505 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -80,10 +80,10 @@ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */ diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index c8e0ff287bc..1bcf581fd15 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -211,9 +211,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index ce731e387d8..b2209919c25 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -227,9 +227,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index 7c58f684b8a..435706289c2 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -155,9 +155,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index e6632acbe79..d2516255d8d 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -146,10 +146,10 @@ */ /* Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* @@ -208,9 +208,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 887bd635d6a..a4420eb5d53 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -207,12 +207,12 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 32) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 32) -#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - 32) +#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) /* * Start addresses for the final memory configuration @@ -303,9 +303,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 5c0dc842aad..6d624dca5a0 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -167,10 +167,10 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x21 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -238,9 +238,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 33ac2859dfb..9aae2c6e3e5 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -109,9 +109,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_ENV_IS_IN_FLASH 1 @@ -167,9 +167,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ CF_ADDRMASK(2) | \ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index b5af493b804..64b0b69c891 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -167,9 +167,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* @@ -228,9 +228,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ CF_ADDRMASK(8) | \ diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 206d1152ee4..1dee3ef2bdd 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -135,9 +135,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* @@ -181,9 +181,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ CF_ADDRMASK(2) | \ diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 798949cc560..41b1314ec25 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -187,9 +187,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* @@ -231,9 +231,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index f704bb3ff7c..dd5ca08a8b6 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -163,9 +163,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -213,9 +213,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 981670ac069..f8790427b1a 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -173,9 +173,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 1000 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -222,9 +222,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 46f60bf517a..9aecd124300 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -154,9 +154,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -211,9 +211,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index d983a8fedb7..17efb633cf1 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -167,10 +167,10 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_END 0x20000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x20000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* @@ -234,9 +234,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 159b178f401..6717ef3efa7 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -162,10 +162,10 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -238,9 +238,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index af1988ce0a4..441496b63e1 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -162,10 +162,10 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -238,9 +238,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 1ff80ee0d67..4c45517874b 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -220,12 +220,12 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 32) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - 32) +#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -310,9 +310,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) #define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) #define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 1cdc37350b5..6a7c92c7c90 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -279,12 +279,12 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 32) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - 32) +#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -409,9 +409,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) #define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) #define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index d0077667f3a..ec2b075b3e4 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -210,13 +210,13 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0xF2000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x21 -#define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_END) +#define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE) #define CONFIG_SYS_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM1_CTRL 0x21 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -287,9 +287,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \ CF_CACR_IDCM) #define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index f23b8b0efae..92fe316ad25 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -196,13 +196,13 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0xF2000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x21 -#define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_END) +#define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE) #define CONFIG_SYS_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM1_CTRL 0x21 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -273,9 +273,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \ CF_CACR_IDCM) #define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) diff --git a/include/configs/MBX.h b/include/configs/MBX.h index 3b4d60c4508..647e9dda72b 100644 --- a/include/configs/MBX.h +++ b/include/configs/MBX.h @@ -144,9 +144,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2f00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2f00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_VPD_SIZE 256 /* size in bytes reserved for vpd buffer */ #define CONFIG_SYS_INIT_VPD_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_VPD_OFFSET-8) diff --git a/include/configs/MBX860T.h b/include/configs/MBX860T.h index 6964bec1be9..26d1b22f5a2 100644 --- a/include/configs/MBX860T.h +++ b/include/configs/MBX860T.h @@ -98,9 +98,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2f00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2f00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_VPD_SIZE 256 /* size in bytes reserved for vpd buffer */ #define CONFIG_SYS_INIT_VPD_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_VPD_OFFSET-8) diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index d79b7029a2d..abc7ad2593c 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -142,10 +142,10 @@ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */ diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h index 6ad0658cdac..a4a52699e77 100644 --- a/include/configs/MHPC.h +++ b/include/configs/MHPC.h @@ -179,9 +179,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 58764d0dfbd..a8d297ee636 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -308,9 +308,9 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF0000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of On Chip SRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of On Chip SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of On Chip SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* reserve some memory for POST and BOOT limit info */ #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 32) diff --git a/include/configs/ML2.h b/include/configs/ML2.h index 8579f96d286..c22824f1640 100644 --- a/include/configs/ML2.h +++ b/include/configs/ML2.h @@ -211,9 +211,9 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index 69c0cab1869..4a407b1c7be 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -157,9 +157,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 05caf21644d..c3ab8a705de 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -348,9 +348,9 @@ #define BCSR_PCI_MODE 0x01000000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #ifdef CONFIG_SYS_LOWBOOT diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 97202df1602..456f008ea49 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -382,9 +382,9 @@ #define FETH_RST 0x04000004 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* Use this HRCW for booting from address 0xfe00000 (JP3 in setting 1-2) */ diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 2eab1c4db7e..b111015bfc1 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -212,10 +212,10 @@ */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 1b2bebb1cc4..b141fdf1260 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -208,10 +208,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 17ce3bc5846..48167c401f3 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -191,9 +191,9 @@ */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index abbb92a71e9..857181a4fcf 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -165,9 +165,9 @@ */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 6009d44be06..ade5b6dc0bb 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -152,9 +152,9 @@ */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 5682787c8b9..5ac20f21131 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -193,10 +193,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 5d10a5e060f..26e9b8290c0 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -306,10 +306,10 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index bc644bab05f..29e1d3185ff 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -181,9 +181,9 @@ */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index e9a64004e8d..b830a0fb0cd 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -172,9 +172,9 @@ */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index fa0da48c258..e4826466af1 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -215,9 +215,9 @@ */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 9d99a9360bf..b5c05fecc65 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -238,9 +238,9 @@ */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 8b8f4674cd3..6f4c1bfc7b2 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -303,11 +303,11 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index b1ee07bfc2c..2d9e7885ef1 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -232,10 +232,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index cc52a67cec2..dcb1127a157 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -164,10 +164,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 037aae75e92..ffaa8d3edea 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -254,10 +254,10 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 0b69885fcc3..cd5f181939c 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -203,11 +203,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xf4010000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 5d21d116f99..031e130b339 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -273,12 +273,12 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 00686842175..13df4076935 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -252,10 +252,10 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 96f7383060c..b2d7892ded1 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -229,10 +229,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index d6171b4683c..6e0ff7e164d 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -235,10 +235,10 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index e3a997e87a2..6ef30c5a420 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -268,11 +268,11 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index e8206ea8e6e..9685df8df4d 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -268,10 +268,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index c876e989498..b023f817f75 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -213,10 +213,10 @@ #else #define CONFIG_SYS_INIT_RAM_ADDR 0xe4000000 /* Initial RAM address */ #endif -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 9009e3c4873..9c6f840d6f8 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -271,10 +271,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #else #define CONFIG_SYS_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ #endif -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h index e0bfd0881c5..79bd608b221 100644 --- a/include/configs/MUSENKI.h +++ b/include/configs/MUSENKI.h @@ -158,8 +158,8 @@ /*#define CONFIG_SYS_GBL_DATA_SIZE 256*/ #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h index acc7187b22c..88bfc8199a6 100644 --- a/include/configs/MVBC_P.h +++ b/include/configs/MVBC_P.h @@ -235,10 +235,10 @@ #define CONFIG_SYS_DEFAULT_MBAR 0x80000000 #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 44d45e3b3af..c2fe620d6f4 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -123,10 +123,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index dd392d0c0d0..cd1bc80f941 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -214,9 +214,9 @@ * Definitions for initial stack pointer and data area */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * Low Level Configuration Settings diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h index 9bf7fcbf8e3..1e4e6d97112 100644 --- a/include/configs/MVS1.h +++ b/include/configs/MVS1.h @@ -140,9 +140,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h index c125157449c..75827358ea8 100644 --- a/include/configs/MVSMR.h +++ b/include/configs/MVSMR.h @@ -204,10 +204,10 @@ #define CONFIG_SYS_DEFAULT_MBAR 0x80000000 #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h index 62eef4631d3..fd6ab59266b 100644 --- a/include/configs/NETPHONE.h +++ b/include/configs/NETPHONE.h @@ -172,9 +172,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index db22ba3f2d9..2d38a1b46c5 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -185,9 +185,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h index 87000e6ddb0..5415b5c151a 100644 --- a/include/configs/NETTA2.h +++ b/include/configs/NETTA2.h @@ -173,9 +173,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h index b7119fd3988..ea838ae2a92 100644 --- a/include/configs/NETVIA.h +++ b/include/configs/NETVIA.h @@ -153,9 +153,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h index 4f76ca1b1a6..743b6dd065d 100644 --- a/include/configs/NSCU.h +++ b/include/configs/NSCU.h @@ -175,9 +175,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/NX823.h b/include/configs/NX823.h index e588ea3c0ae..23a30f74900 100644 --- a/include/configs/NX823.h +++ b/include/configs/NX823.h @@ -117,9 +117,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index 03430439cff..6c6828ac2b1 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -297,9 +297,9 @@ #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h index cef1117578e..5ab99423606 100644 --- a/include/configs/ORSG.h +++ b/include/configs/ORSG.h @@ -293,9 +293,9 @@ #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/OXC.h b/include/configs/OXC.h index 9a0c558ecef..0f362f1b846 100644 --- a/include/configs/OXC.h +++ b/include/configs/OXC.h @@ -148,10 +148,10 @@ #endif #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 1a4632fc8f1..bc5b73e4386 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -153,11 +153,11 @@ #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index cff0ed341c8..7f056184625 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -211,10 +211,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ -#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 8c7d5287c81..6e26f7a15ad 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -272,10 +272,10 @@ #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS #endif -#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h index 47b75580dda..54212f1a668 100644 --- a/include/configs/P3G4.h +++ b/include/configs/P3G4.h @@ -185,9 +185,9 @@ * Definitions for initial stack pointer and data area */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_RAM_LOCK diff --git a/include/configs/PATI.h b/include/configs/PATI.h index b07cac11f42..8887f97b7b2 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -132,9 +132,9 @@ * Definitions for initial stack pointer and data area */ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */ -#define CONFIG_SYS_INIT_RAM_END (CONFIG_SYS_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */ +#define CONFIG_SYS_INIT_RAM_SIZE (CONFIG_SYS_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial global data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */ +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_IMMR + 0x03fa000) /* Physical start adress of inital stack */ /* * Start addresses for the final memory configuration diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 28769b3abcc..91c8f53c415 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -307,10 +307,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h index d0ce92487ef..ea02311279a 100644 --- a/include/configs/PCIPPC2.h +++ b/include/configs/PCIPPC2.h @@ -143,8 +143,8 @@ #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_INIT_RAM_LOCK diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h index 8f7ec023d3c..4cf45d3b204 100644 --- a/include/configs/PCIPPC6.h +++ b/include/configs/PCIPPC6.h @@ -145,8 +145,8 @@ #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_INIT_RAM_LOCK diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index e3cf94376c0..04062b07c44 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -258,9 +258,9 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF0000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of On Chip SRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of On Chip SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of On Chip SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*********************************************************************** diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 3844e48c485..421f26a1b27 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -368,10 +368,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/PM520.h b/include/configs/PM520.h index 5832307f6da..f039e5a9a22 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -233,11 +233,11 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/PM826.h b/include/configs/PM826.h index d26254f04ba..7ac29f2a808 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -293,9 +293,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 3053ad4745c..565a5d8d6a6 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -287,9 +287,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 59633348996..6c3f7c2be5f 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -165,10 +165,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 1559fd660c4..f5aa77a678c 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -168,10 +168,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index b1d0ea5c729..d5794e471e4 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -328,11 +328,11 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* End of used area in RAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index 74b656c7613..201a9c4a71f 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -270,10 +270,10 @@ /* inside SDRAM */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* End of used area in RAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes res. for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 7585e6ec159..1568912ddaa 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -88,9 +88,9 @@ *----------------------------------------------------------------------*/ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/PN62.h b/include/configs/PN62.h index 01878abe8ba..29ebd09efbe 100644 --- a/include/configs/PN62.h +++ b/include/configs/PN62.h @@ -156,8 +156,8 @@ #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_NO_FLASH 1 /* There is no FLASH memory */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 3bc3d70bdcb..b2de8686c5a 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -531,10 +531,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/QS823.h b/include/configs/QS823.h index ec2e0c938e9..0df10844913 100644 --- a/include/configs/QS823.h +++ b/include/configs/QS823.h @@ -272,9 +272,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/QS850.h b/include/configs/QS850.h index 3d455c4b0f7..338ca2e16e2 100644 --- a/include/configs/QS850.h +++ b/include/configs/QS850.h @@ -272,9 +272,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h index 99ccf08b405..6574986636d 100644 --- a/include/configs/QS860T.h +++ b/include/configs/QS860T.h @@ -181,9 +181,9 @@ CONFIG_SPI * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index a0355f10564..000a27d4821 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -195,9 +195,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 5a23e56dec5..91e3b770f4f 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -167,9 +167,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h index e8e8a5d9439..757b7f93949 100644 --- a/include/configs/RPXClassic.h +++ b/include/configs/RPXClassic.h @@ -183,9 +183,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h index a7609cae69d..3fa5a9af567 100644 --- a/include/configs/RPXlite.h +++ b/include/configs/RPXlite.h @@ -119,9 +119,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index b895f05aa40..ebc652d716f 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -194,9 +194,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index 2ac764dd268..3a30b4ae6b4 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -265,9 +265,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h index 9530381f5a0..58813d706b0 100644 --- a/include/configs/RRvision.h +++ b/include/configs/RRvision.h @@ -196,9 +196,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index cdfce6aec6a..ae71e379e5c 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -241,9 +241,9 @@ #define CONFIG_SYS_IMMR 0xF0000000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_SDRAM_BASE 0x00000000 diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index b91dc4bd26d..081c59b5fe6 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -193,10 +193,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/SCM.h b/include/configs/SCM.h index edad4595ccb..55efe531906 100644 --- a/include/configs/SCM.h +++ b/include/configs/SCM.h @@ -325,9 +325,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 15d99f99875..03482972db4 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -103,10 +103,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ diff --git a/include/configs/SM850.h b/include/configs/SM850.h index 259f8ab5e16..13d556dc530 100644 --- a/include/configs/SM850.h +++ b/include/configs/SM850.h @@ -125,9 +125,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h index b132a780735..a1cd6700e7c 100644 --- a/include/configs/SPD823TS.h +++ b/include/configs/SPD823TS.h @@ -137,9 +137,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index 7c3f8745cc0..52e8e167e1c 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -205,9 +205,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h index f6107cec13e..e2d45b1c826 100644 --- a/include/configs/Sandpoint8240.h +++ b/include/configs/Sandpoint8240.h @@ -154,9 +154,9 @@ #define CONFIG_SYS_MONITOR_BASE 0x00090000 #define CONFIG_SYS_RAMBOOT 1 #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_INIT_RAM_END 0x10000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 #define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #else #undef CONFIG_SYS_RAMBOOT @@ -167,8 +167,8 @@ #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #endif diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h index 66a98c19c6a..1eaad5ab1dc 100644 --- a/include/configs/Sandpoint8245.h +++ b/include/configs/Sandpoint8245.h @@ -124,9 +124,9 @@ #define CONFIG_SYS_MONITOR_BASE 0x00090000 #define CONFIG_SYS_RAMBOOT 1 #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_INIT_RAM_END 0x10000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 #define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #else #undef CONFIG_SYS_RAMBOOT @@ -137,8 +137,8 @@ #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #endif diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index b69f015c7cd..6be20be175c 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -189,9 +189,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_ENV_IS_IN_FLASH 1 @@ -253,9 +253,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) #define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index f336e8d0bc3..1bcb9d02d50 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -327,14 +327,14 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #ifdef CONFIG_POST /* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE #else -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h index d849dbc2b9f..f24b86e626e 100644 --- a/include/configs/TK885D.h +++ b/include/configs/TK885D.h @@ -221,9 +221,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index ab1773c3659..ba1fcf12652 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -297,11 +297,11 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index a9d9bed1d31..090101306e8 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -230,9 +230,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2f00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2f00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_VPD_SIZE 256 /* size in bytes reserved for vpd buffer */ #define CONFIG_SYS_INIT_VPD_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_VPD_OFFSET-8) diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 794e11b024d..86ebaa4172c 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -487,14 +487,14 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #ifdef CONFIG_POST /* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE #else -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index b68d7a7bc11..681185dd848 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -182,9 +182,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 374300b1f69..5d32b412f97 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -177,9 +177,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index 2104e03c22b..7214c85bacd 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -362,9 +362,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h index 063ca230dba..1771824bb46 100644 --- a/include/configs/TQM8272.h +++ b/include/configs/TQM8272.h @@ -488,9 +488,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 36399caac56..abaae732f7a 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -151,10 +151,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB = 3 sect. for Mon */ diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index c97bf66c9b2..a4efe1145ef 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -167,9 +167,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 3e13f61ea59..0300586f8ef 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -166,9 +166,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 1bc286148cd..e9c69dcc348 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -171,9 +171,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 197ffdebeaa..e0481f137b3 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -205,9 +205,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index d5c116f5b8a..58369767443 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -243,10 +243,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_CCSRBAR \ + 0x04010000) /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (~CONFIG_SYS_TEXT_BASE + 1)/* Reserved for Monitor */ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index d3d0db4f176..da8a664792c 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -170,9 +170,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 0854d9544bf..13425b1dfb8 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -171,9 +171,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index c247737d62e..3f879ec331b 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -174,9 +174,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 1b6d9cb73a5..1206b7aa47f 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -174,9 +174,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index a5018d5836d..c3f3e87aede 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -217,9 +217,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index 507fb2ffa74..a30e82d3538 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -219,9 +219,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index c518d6e747d..3bb975c7061 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -246,10 +246,10 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 026d2a43167..48277485406 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -377,10 +377,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index fddefb29ff8..f1e44077df1 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -258,10 +258,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h index 6243afee0a9..4db83562f38 100644 --- a/include/configs/VoVPN-GW.h +++ b/include/configs/VoVPN-GW.h @@ -298,9 +298,9 @@ /* definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 9eacd82323a..1e71d093628 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -313,9 +313,9 @@ * Definitions for initial stack pointer and data area (in RAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index 6591d02bd26..0ff84d5d946 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -316,9 +316,9 @@ * Definitions for initial stack pointer and data area (in RAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index e23ad4170af..a67dab27fc7 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -321,10 +321,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h index a0fca032f47..2d52864a5d5 100644 --- a/include/configs/Yukon8220.h +++ b/include/configs/Yukon8220.h @@ -257,10 +257,10 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h index 0eabf37e58f..1d103f2e997 100644 --- a/include/configs/ZPC1900.h +++ b/include/configs/ZPC1900.h @@ -195,9 +195,9 @@ #define BCSR_PCI_MODE 0x01 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* Hard reset configuration word */ diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h index 17ada0d9a52..69e28d5cddd 100644 --- a/include/configs/ZUMA.h +++ b/include/configs/ZUMA.h @@ -180,9 +180,9 @@ * Definitions for initial stack pointer and data area */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_RAM_LOCK diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index f18bc45c4d1..aa0238b99e4 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -250,11 +250,11 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/acadia.h b/include/configs/acadia.h index c1bd4be9441..0b105693f7c 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -84,10 +84,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xf8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x4000 /* 16K of onchip SRAM */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/aev.h b/include/configs/aev.h index 10ffb2e113b..122ebabb9dc 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -271,14 +271,14 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #ifdef CONFIG_POST /* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE #else -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/alpr.h b/include/configs/alpr.h index dfe7802119f..ee13d1bd0cd 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -64,10 +64,10 @@ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/aria.h b/include/configs/aria.h index a63c45334a8..37592fc66c4 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -300,10 +300,10 @@ /* Use SRAM for initial stack */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE #define CONFIG_SYS_GBL_DATA_SIZE 0x100 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index f2bc26aab81..dae31b17c8c 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -300,10 +300,10 @@ * Definitions for initial stack pointer and data area (in internal SRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_END 0x8000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 #define CONFIG_SYS_INIT_RAM_CTRL 0x221 #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET @@ -387,9 +387,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/atc.h b/include/configs/atc.h index 62e38e1cf14..472e73c7ec6 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -244,9 +244,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index 1bdfd9da2f0..b985dc11bf2 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -80,9 +80,9 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/barco.h b/include/configs/barco.h index b656c01597f..6ff5c55c82b 100644 --- a/include/configs/barco.h +++ b/include/configs/barco.h @@ -151,9 +151,9 @@ #define CONFIG_SYS_MONITOR_BASE 0x00090000 #define CONFIG_SYS_RAMBOOT 1 #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_INIT_RAM_END 0x10000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 #define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #else #undef CONFIG_SYS_RAMBOOT @@ -163,8 +163,8 @@ #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #endif diff --git a/include/configs/bluestone.h b/include/configs/bluestone.h index 0bb97d9ea44..c689763218f 100644 --- a/include/configs/bluestone.h +++ b/include/configs/bluestone.h @@ -66,10 +66,10 @@ * Initial RAM & stack pointer (placed in OCM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index 7262b3e8a09..7171032291a 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -238,10 +238,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h index 1351f297a96..8852f748821 100644 --- a/include/configs/c2mon.h +++ b/include/configs/c2mon.h @@ -143,9 +143,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h index 5547d55eecd..2ab5579ac3e 100644 --- a/include/configs/ca9x4_ct_vxp.h +++ b/include/configs/ca9x4_ct_vxp.h @@ -116,9 +116,9 @@ /* additions for new relocation code */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/canmb.h b/include/configs/canmb.h index e1ee158d4c7..7666ee7d228 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -157,11 +157,11 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index fcc7d0e3ed5..fc039f8f267 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -124,9 +124,9 @@ * Initial RAM & stack pointer (placed in OCM) *----------------------------------------------------------------------*/ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index af6769b18d5..488c0f2c47f 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -162,13 +162,13 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #ifdef CONFIG_POST /* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE #else -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_BOARD_TYPES 1 /* we use board_type */ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h index 88a45c32499..e03bf31d3d1 100644 --- a/include/configs/cmi_mpc5xx.h +++ b/include/configs/cmi_mpc5xx.h @@ -129,9 +129,9 @@ * Definitions for initial stack pointer and data area */ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */ -#define CONFIG_SYS_INIT_RAM_END (CONFIG_SYS_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */ +#define CONFIG_SYS_INIT_RAM_SIZE (CONFIG_SYS_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* Size in bytes reserved for initial global data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */ +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */ #define CONFIG_SYS_INIT_SP_ADDR 0x013fa000 /* Physical start adress of inital stack */ /* diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 18710fbe5ae..0b36eb5acbc 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -276,9 +276,9 @@ from which user programs will be started */ * Definitions for initial stack pointer and data area (in internal SRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- @@ -332,9 +332,9 @@ from which user programs will be started */ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h index 8bfd7022c03..b10e2173077 100644 --- a/include/configs/cogent_mpc8260.h +++ b/include/configs/cogent_mpc8260.h @@ -224,9 +224,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h index 3cc95b4a4a2..4d4a81c64e6 100644 --- a/include/configs/cogent_mpc8xx.h +++ b/include/configs/cogent_mpc8xx.h @@ -171,9 +171,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 2733fb21e35..065e89f8e4d 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -211,10 +211,10 @@ #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS #endif -#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index a865296fdf9..78df31fa75b 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -235,10 +235,10 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/csb272.h b/include/configs/csb272.h index acd9c93efd9..071e9679809 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -293,9 +293,9 @@ * */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* byte size reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 69abb167625..8f5b3d458fb 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -292,9 +292,9 @@ * */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* byte size reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/debris.h b/include/configs/debris.h index 188061e9c19..978b1430c6a 100644 --- a/include/configs/debris.h +++ b/include/configs/debris.h @@ -199,9 +199,9 @@ #define CONFIG_SYS_MONITOR_BASE 0x00090000 #define CONFIG_SYS_RAMBOOT 1 #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_INIT_RAM_END 0x10000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 #define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #else #undef CONFIG_SYS_RAMBOOT @@ -212,8 +212,8 @@ #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #endif diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index 2e9a13f7e4a..0ede4ec0aa5 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -308,11 +308,11 @@ * Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #define CONFIG_SYS_GBL_DATA_SIZE 4096 #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index 0d44eda8670..c9bd26118ba 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -191,11 +191,11 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size/bytes res'd for init data*/ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index 637cc55e068..11cfe706981 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -119,11 +119,11 @@ #define CONFIG_SYS_INIT_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/ebony.h b/include/configs/ebony.h index a0d38696607..46988c13cb4 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -73,10 +73,10 @@ * Initial RAM & stack pointer (placed in internal SRAM) *----------------------------------------------------------------------*/ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h index 5f083bda177..a21dbf7128f 100644 --- a/include/configs/ep8248.h +++ b/include/configs/ep8248.h @@ -218,9 +218,9 @@ #define CONFIG_SYS_IMMR 0xF0000000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* Hard reset configuration word */ diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index cbf55dba89e..277bd8d754e 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -429,9 +429,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h index 48985a06ca2..114af7ae5b4 100644 --- a/include/configs/ep82xxm.h +++ b/include/configs/ep82xxm.h @@ -346,9 +346,9 @@ #define CONFIG_SYS_IMMR 0xF0000000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h index d95144d589c..cb521a125fe 100644 --- a/include/configs/galaxy5200.h +++ b/include/configs/galaxy5200.h @@ -207,12 +207,12 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM /* End of used area in SPRAM */ -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h index 282afbcc610..32e3cd65852 100644 --- a/include/configs/gdppc440etx.h +++ b/include/configs/gdppc440etx.h @@ -72,9 +72,9 @@ */ #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram*/ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes init data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 6c1ddac85d5..13bb822ae6e 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -438,9 +438,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h index dd5e5a20c64..d4168ebfc39 100644 --- a/include/configs/hcu4.h +++ b/include/configs/hcu4.h @@ -71,9 +71,9 @@ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* OCM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index a2edf51e202..7ff51a734e9 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -82,9 +82,9 @@ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/hermes.h b/include/configs/hermes.h index 58fc4ce76f9..089f1da9a0b 100644 --- a/include/configs/hermes.h +++ b/include/configs/hermes.h @@ -122,9 +122,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index 60e5c2b4bb5..aebb5e58ea1 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -196,13 +196,13 @@ #define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) #ifdef CONFIG_POST -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE #else -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/hymod.h b/include/configs/hymod.h index ccfc3dfdfb1..5a4488b0562 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -377,9 +377,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/icon.h b/include/configs/icon.h index 8d98d57f88e..4742429964e 100644 --- a/include/configs/icon.h +++ b/include/configs/icon.h @@ -97,10 +97,10 @@ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Init RAM */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* end used area */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* size of used area */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* sizeof init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) diff --git a/include/configs/idmr.h b/include/configs/idmr.h index 8105876e4ea..259d0700363 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -180,9 +180,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* @@ -225,9 +225,9 @@ #define CONFIG_SYS_CACHELINE_SIZE 16 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 8) + CONFIG_SYS_INIT_RAM_SIZE - 8) #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_END - 4) + CONFIG_SYS_INIT_RAM_SIZE - 4) #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 94252371bc3..09dc876c396 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -150,8 +150,8 @@ #undef CONFIG_SYS_ARM_WITHOUT_RELOC #define CONFIG_SYS_SDRAM_BASE CSD0_BASE #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_END IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) /*----------------------------------------------------------------------- diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 3636d12509d..e381d0d49d9 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -211,13 +211,13 @@ #define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) #ifdef CONFIG_POST -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE #else -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/intip.h b/include/configs/intip.h index 56d2be2afe7..4e490eed4bd 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -106,10 +106,10 @@ * Initial RAM & stack pointer (placed in OCM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index c37b83b0959..e7edf61eca4 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -264,12 +264,12 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM /* End of used area in DPRAM */ -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 6f5ac942f4e..70d67e7d234 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -225,11 +225,11 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 135a4c26aa4..df92576b95e 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -96,10 +96,10 @@ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index e153b3120fb..6dff2601782 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -92,9 +92,9 @@ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + (32 << 20)) /* 32 MiB */ #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) /* 4 KiB */ +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) /* 4 KiB */ #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * If the data cache is being used for the primordial stack and global diff --git a/include/configs/km8xx.h b/include/configs/km8xx.h index 2a42e997431..5c2a7ad144a 100644 --- a/include/configs/km8xx.h +++ b/include/configs/km8xx.h @@ -107,9 +107,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 03d3aacb8f5..81536a09e30 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -179,9 +179,9 @@ */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/korat.h b/include/configs/korat.h index 3a0531bc8f1..55485c209bd 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -88,9 +88,9 @@ /* 440EPx has 16KB of internal SRAM, so no need for D-Cache */ #undef CONFIG_SYS_INIT_RAM_DCACHE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /* diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h index fa876255bf1..c5972043092 100644 --- a/include/configs/kvme080.h +++ b/include/configs/kvme080.h @@ -117,9 +117,9 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_FLASH_BASE 0x7C000000 diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index aaf663a749b..7a2a8c33e14 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -275,9 +275,9 @@ #else #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #endif -#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /*---------------------------------------------------------------------- * Serial configuration diff --git a/include/configs/luan.h b/include/configs/luan.h index d8014047b7b..60ebafb853f 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -80,9 +80,9 @@ * Initial RAM & stack pointer (placed in SDRAM) *----------------------------------------------------------------------*/ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_END (8 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (8 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index 9e48857308b..cf9a2ca01ca 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -275,9 +275,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 68 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 63e22d400c0..0f637c752a6 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -87,9 +87,9 @@ */ #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* unused GPT0 COMP reg */ diff --git a/include/configs/makalu.h b/include/configs/makalu.h index c4853ab9c20..ae07dc72a42 100644 --- a/include/configs/makalu.h +++ b/include/configs/makalu.h @@ -88,9 +88,9 @@ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + (32 << 20)) /* 32 MiB */ #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) /* 4 KiB */ +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) /* 4 KiB */ #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * If the data cache is being used for the primordial stack and global diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h index 7be135478ff..62398a8a7f1 100644 --- a/include/configs/manroland/mpc5200-common.h +++ b/include/configs/manroland/mpc5200-common.h @@ -114,7 +114,7 @@ #define CONFIG_SYS_DEFAULT_MBAR 0x80000000 #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END -\ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE -\ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET @@ -135,9 +135,9 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #ifdef CONFIG_POST /* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE #else -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index 4d946abb23c..e127504dd04 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -259,11 +259,11 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/mcu25.h b/include/configs/mcu25.h index 4aef6fc9622..336871d4ac6 100644 --- a/include/configs/mcu25.h +++ b/include/configs/mcu25.h @@ -71,9 +71,9 @@ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* OCM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index 1e82bc5ca7d..501e78cc1de 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -206,10 +206,10 @@ /* Use SRAM for initial stack */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Init RAM addr */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */ diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index 036b7904f35..d577f1d146b 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -215,11 +215,11 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index 4dcd67919ba..bdc98a6b151 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -178,9 +178,9 @@ #define CONFIG_SYS_IMMR 0xF0000000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* Hard reset configuration word */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index f7493f56be7..6c13e3f4e35 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -200,10 +200,10 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/mpc5121-common.h b/include/configs/mpc5121-common.h index afae1ab6dae..399e43f09e4 100644 --- a/include/configs/mpc5121-common.h +++ b/include/configs/mpc5121-common.h @@ -25,10 +25,10 @@ /* Use SRAM for initial stack */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Init RAM base */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE /* End of area */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE /* Size of area */ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes of initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index fbcc8392e7d..cbfcb7099b0 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -270,10 +270,10 @@ /* Use SRAM for initial stack */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */ diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 94a8c93b42b..1ab58ad3fa1 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -221,10 +221,10 @@ */ #undef CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0x07d00000 /* unused memory region */ -#define CONFIG_SYS_INIT_RAM_END 0x4000/* larger space - we have SDRAM initialized */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000/* larger space - we have SDRAM initialized */ #define CONFIG_SYS_GBL_DATA_SIZE 128/* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /*----------------------------------------------------------------------- * Start addresses for the final memory configuration diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 14f663f3b6e..1d0e1f2e806 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -220,10 +220,10 @@ */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h index 345bdd119a9..e35f923f450 100644 --- a/include/configs/muas3001.h +++ b/include/configs/muas3001.h @@ -260,9 +260,9 @@ #define CONFIG_SYS_DEFAULT_IMMR 0x0F010000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* Hard reset configuration word */ diff --git a/include/configs/munices.h b/include/configs/munices.h index 97330d56401..db3cc35d5eb 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -117,9 +117,9 @@ #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/neo.h b/include/configs/neo.h index 1063d123d27..5ee6c7f5e96 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -208,10 +208,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h index c9c69bbab6c..b5878b4203d 100644 --- a/include/configs/o2dnt.h +++ b/include/configs/o2dnt.h @@ -214,11 +214,11 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index f33f0ff2c8c..fe6f579492c 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -72,10 +72,10 @@ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 8b5ef8fa852..97703d6b720 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -98,9 +98,9 @@ */ #undef CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0x42000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /*----------------------------------------------------------------------- diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 71529a23d3a..20a07558182 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -61,10 +61,10 @@ * Initial RAM & stack pointer (placed in internal SRAM) *----------------------------------------------------------------------*/ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon*/ diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h index 5898b4e8221..1249b0d9ae8 100644 --- a/include/configs/pcm030.h +++ b/include/configs/pcm030.h @@ -223,11 +223,11 @@ RTC configuration #define CONFIG_SYS_DEFAULT_MBAR 0x80000000 /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used */ /* area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes */ /* reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index afdd69cd788..bf89ddc0af3 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -74,9 +74,9 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index 28dfe3b2ee7..3f66a980d04 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -221,10 +221,10 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index e7584c3a295..831097eb194 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -297,15 +297,15 @@ * copied to top of RAM by the init code. * * CONFIG_SYS_INIT_RAM_ADDR - Address of Init RAM, above exception vect - * CONFIG_SYS_INIT_RAM_END - Size of Init RAM + * CONFIG_SYS_INIT_RAM_SIZE - Size of Init RAM * CONFIG_SYS_GBL_DATA_SIZE - Ammount of RAM to reserve for global data * CONFIG_SYS_GBL_DATA_OFFSET - Start of global data, top of stack */ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000) -#define CONFIG_SYS_INIT_RAM_END 0x4000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index 7018a8c3c78..d37d588ab2e 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -422,9 +422,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/qong.h b/include/configs/qong.h index 426d90d7dea..900c2792817 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -300,8 +300,8 @@ extern int qong_nand_rdy(void *chip); /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_END IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) #define CONFIG_BOARD_EARLY_INIT_F 1 diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index f847f9cb33d..e3929bb043b 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -247,10 +247,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of OCM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/quantum.h b/include/configs/quantum.h index 2440eee7c07..54a8886ba36 100644 --- a/include/configs/quantum.h +++ b/include/configs/quantum.h @@ -158,9 +158,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/redwood.h b/include/configs/redwood.h index a7d5dac9af8..53f817cef2e 100644 --- a/include/configs/redwood.h +++ b/include/configs/redwood.h @@ -89,10 +89,10 @@ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/rmu.h b/include/configs/rmu.h index 5e6bc27e097..8e6a0a34475 100644 --- a/include/configs/rmu.h +++ b/include/configs/rmu.h @@ -154,9 +154,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index b82ff372a60..9e705de695f 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -253,9 +253,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index d7417164cb3..118e80d3aa6 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -673,9 +673,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index 3de2a9efb88..a308085dabb 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -264,9 +264,9 @@ #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h index 0934a002bfd..f6a32d77c76 100644 --- a/include/configs/sbc8240.h +++ b/include/configs/sbc8240.h @@ -204,8 +204,8 @@ typedef unsigned int led_id_t; #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* * NS16550 Configuration diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h index 54a1a36e292..48a1c560f20 100644 --- a/include/configs/sbc8260.h +++ b/include/configs/sbc8260.h @@ -572,9 +572,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index ee2292ce864..e07513a0bb9 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -169,10 +169,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 0ddd20d376b..ff0a7dbce7b 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -321,12 +321,12 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index cd9652cfc3e..45269448cc2 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -191,10 +191,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 9e2aef42eb9..dfeb7981f5d 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -249,10 +249,10 @@ #else #define CONFIG_SYS_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ #endif -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 3e6abf34e48..2a166bc416a 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -463,7 +463,7 @@ /* Where the internal SRAM starts */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* Where the internal SRAM ends (only offset) */ -#define CONFIG_SYS_INIT_RAM_END 0x0F00 +#define CONFIG_SYS_INIT_RAM_SIZE 0x0F00 /* @@ -476,13 +476,13 @@ | | | 64 Bytes | | | - CONFIG_SYS_INIT_RAM_END ------> ------------ higher address + CONFIG_SYS_INIT_RAM_SIZE ------> ------------ higher address (offset only) */ /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_SIZE 64 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* Initial value of the stack pointern in internal SRAM */ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 412deeadb6f..b8581dec5e2 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -98,9 +98,9 @@ */ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /* diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 0bbad161f6f..81f607d7d91 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -170,10 +170,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size used area in RAM*/ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384KiB for Mon */ diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h index 75b8e600e57..c956e0d7b2f 100644 --- a/include/configs/sorcery.h +++ b/include/configs/sorcery.h @@ -227,10 +227,10 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h index 4d187471427..91a68404eb0 100644 --- a/include/configs/spc1920.h +++ b/include/configs/spc1920.h @@ -143,9 +143,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/spieval.h b/include/configs/spieval.h index 880c8a30575..cf86735549f 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -322,14 +322,14 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #ifdef CONFIG_POST /* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE #else -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 479fbab4cb0..8fc3d403660 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -155,10 +155,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 6ea58074bb5..42188ddfa9d 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -167,10 +167,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index b9739ff19c6..cb8abea360e 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -168,9 +168,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index 219b85b5900..9f12e73de95 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -193,9 +193,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index d00e64eff29..a31e3b6baf4 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -97,10 +97,10 @@ * Initial RAM & stack pointer (placed in OCM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/taihu.h b/include/configs/taihu.h index 6e9dbc57593..493e3e02d6f 100644 --- a/include/configs/taihu.h +++ b/include/configs/taihu.h @@ -288,10 +288,10 @@ unsigned char spi_read(void); #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/taishan.h b/include/configs/taishan.h index 12f35ae1f4a..29b60a109a7 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -68,10 +68,10 @@ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM*/ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM*/ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/uc100.h b/include/configs/uc100.h index 5392fb59079..5d55279cac1 100644 --- a/include/configs/uc100.h +++ b/include/configs/uc100.h @@ -200,9 +200,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index c027f46e5d2..b962c499aa4 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -196,10 +196,10 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" #define CONFIG_SYS_INIT_DATA_SIZE 128 /* Size in bytes reserved for */ /* initial data */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE) #define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /*-------------------------------------------------------------------- * NS16550 Configuration diff --git a/include/configs/v37.h b/include/configs/v37.h index c34b6e86786..0d9a2499091 100644 --- a/include/configs/v37.h +++ b/include/configs/v37.h @@ -158,9 +158,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 96ffc6a0d52..4a97cac88a9 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -227,10 +227,10 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 283b92c4338..11b9cfced2c 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -171,10 +171,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index 56fb5f7110e..d98fc20bed5 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -176,9 +176,9 @@ * Definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/vision2.h b/include/configs/vision2.h index d2d95652476..7bc63180c71 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -192,8 +192,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x1FFE8000 #ifndef CONFIG_SYS_ARM_WITHOUT_RELOC -#define CONFIG_SYS_INIT_RAM_END (64 * 1024) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_INIT_RAM_SIZE (64 * 1024) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_GBL_DATA_OFFSET) diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 2c95c121f37..81c7489252d 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -161,10 +161,10 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xF7000000 /* Initial RAM addr */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* size */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* size */ #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* size init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/walnut.h b/include/configs/walnut.h index 72ac4e33c2c..6e063f5a29f 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -217,9 +217,9 @@ #define CONFIG_SYS_INIT_DCACHE_CS 4 /* use cs # 4 for data cache memory */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index b4a96759355..d377848e556 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -91,9 +91,9 @@ /*Stack*/ #define CONFIG_SYS_INIT_RAM_ADDR 0x800000/* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*Speed*/ diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h index d0f93635333..9103b6a0334 100644 --- a/include/configs/xpedite1000.h +++ b/include/configs/xpedite1000.h @@ -102,9 +102,9 @@ extern void out32(unsigned int, unsigned long); #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 8df9edd0edf..a4e485ce495 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -218,10 +218,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 -#define CONFIG_SYS_INIT_RAM_END 0x00004000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index 2f313371c54..eb73fa846d1 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -186,10 +186,10 @@ */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 -#define CONFIG_SYS_INIT_RAM_END 0x4000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index e7de13a7ccb..dd8d22692c4 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -224,10 +224,10 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 -#define CONFIG_SYS_INIT_RAM_END 0x00004000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index a849cf93635..3c6bf5cf006 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -214,10 +214,10 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); */ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 -#define CONFIG_SYS_INIT_RAM_END 0x00004000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 0d450f50d4a..85b88c8be5d 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -77,9 +77,9 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ -#define CONFIG_SYS_INIT_RAM_END (4 << 10) +#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 8d5d45fbc85..55a364c2ca7 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -97,10 +97,10 @@ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/zeus.h b/include/configs/zeus.h index 5ddec84c74c..d24ea0b7070 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -253,10 +253,10 @@ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of OCM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) /* reserve some memory for POST and BOOT limit info */ #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 16) From 16a354f920f3959ed847bd917bdfbc7eba48cf1e Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 26 Oct 2010 00:08:35 +0200 Subject: [PATCH 082/116] include/asm-offsets.h: automatically generate assembler constants A recurrent issue is that certain C level constructs like sizeof() or offsetof() cannot be used in assembler files, which is inconvenient when such constructs are used in the definition of macro names etc. To avoid duplication of such definitions (and thus another cause of problems), we adapt the Linux way to automatically generate the respective definitions from the respective C header files. In Linux, this is implemented in include/linux/kbuild.h, Kbuild, and arch/*/kernel/asm-offsets.c; we adapt the code from the Linux v2.6.36 kernel tree. We also copy the concept of the include/generated/ directory which can be used to hold other automatically generated files as well. We start with an architecture-independent lib/asm-offsets.c which generates include/generated/generic-asm-offsets.h (included by include/asm-offsets.h, which is what will be referred to in the actual source code). Later this may be extended by architecture-specific arch/*/lib/asm-offsets.c files that will generate a include/generated/asm-offsets.h. Signed-off-by: Wolfgang Denk Acked-by: Kumar Gala --- .gitignore | 3 +++ Makefile | 21 +++++++++++++++++++-- include/asm-offsets.h | 2 ++ include/linux/kbuild.h | 20 ++++++++++++++++++++ lib/asm-offsets.c | 25 +++++++++++++++++++++++++ tools/scripts/make-asm-offsets | 27 +++++++++++++++++++++++++++ 6 files changed, 96 insertions(+), 2 deletions(-) create mode 100644 include/asm-offsets.h create mode 100644 include/linux/kbuild.h create mode 100644 lib/asm-offsets.c create mode 100755 tools/scripts/make-asm-offsets diff --git a/.gitignore b/.gitignore index 67d2cd62c06..e71f6ac474d 100644 --- a/.gitignore +++ b/.gitignore @@ -40,6 +40,9 @@ /errlog /reloc_off +/include/generated/ +/lib/asm-offsets.s + # stgit generated dirs patches-* .stgit-edit.txt diff --git a/Makefile b/Makefile index f9f83eb12f3..b50830a45ff 100644 --- a/Makefile +++ b/Makefile @@ -372,7 +372,8 @@ GEN_UBOOT = \ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ -Map u-boot.map -o u-boot -$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds +$(obj)u-boot: depend \ + $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds $(GEN_UBOOT) ifeq ($(CONFIG_KALLSYMS),y) smap=`$(call SYSTEM_MAP,u-boot) | \ @@ -426,7 +427,9 @@ updater: # Explicitly make _depend in subdirs containing multiple targets to prevent # parallel sub-makes creating .depend files simultaneously. -depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk +depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \ + $(obj)include/autoconf.mk \ + $(obj)include/generated/generic-asm-offsets.h for dir in $(SUBDIRS) $(CPUDIR) $(dir $(LDSCRIPT)) ; do \ $(MAKE) -C $$dir _depend ; done @@ -473,6 +476,18 @@ $(obj)include/autoconf.mk: $(obj)include/config.h sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ mv $@.tmp $@ +$(obj)include/generated/generic-asm-offsets.h: $(obj)include/autoconf.mk.dep \ + $(obj)lib/asm-offsets.s + @$(XECHO) Generating $@ + tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@ + +$(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \ + $(src)lib/asm-offsets.c + @mkdir -p $(obj)lib + $(CC) -DDO_DEPS_ONLY \ + $(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \ + -o $@ $(src)lib/asm-offsets.c -c -S + ######################################################################### else # !config.mk all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ @@ -1206,6 +1221,7 @@ clean: $(obj)u-boot.lds \ $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] @rm -f $(obj)include/bmp_logo.h + @rm -f $(obj)lib/asm-offsets.s @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map} @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map} @rm -f $(ONENAND_BIN) @@ -1229,6 +1245,7 @@ clobber: clean @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm + @rm -fr $(obj)include/generated @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f diff --git a/include/asm-offsets.h b/include/asm-offsets.h new file mode 100644 index 00000000000..ab28184054f --- /dev/null +++ b/include/asm-offsets.h @@ -0,0 +1,2 @@ +#include +/* #include */ diff --git a/include/linux/kbuild.h b/include/linux/kbuild.h new file mode 100644 index 00000000000..be763842c0b --- /dev/null +++ b/include/linux/kbuild.h @@ -0,0 +1,20 @@ +/* + * Copied from Linux: + * commit 37487a56523d402e25650da16c337acf4cecd13d + * Author: Christoph Lameter + */ +#ifndef __LINUX_KBUILD_H +#define __LINUX_KBUILD_H + +#define DEFINE(sym, val) \ + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + +#define BLANK() asm volatile("\n->" : : ) + +#define OFFSET(sym, str, mem) \ + DEFINE(sym, offsetof(struct str, mem)) + +#define COMMENT(x) \ + asm volatile("\n->#" x) + +#endif diff --git a/lib/asm-offsets.c b/lib/asm-offsets.c new file mode 100644 index 00000000000..4eb61747c4f --- /dev/null +++ b/lib/asm-offsets.c @@ -0,0 +1,25 @@ +/* + * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c + * + * This program is used to generate definitions needed by + * assembly language modules. + * + * We use the technique used in the OSF Mach kernel code: + * generate asm statements containing #defines, + * compile this file to assembler, and then extract the + * #defines from the assembly-language output. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include + +#include + +int main(void) +{ + return 0; +} diff --git a/tools/scripts/make-asm-offsets b/tools/scripts/make-asm-offsets new file mode 100755 index 00000000000..61c095f4264 --- /dev/null +++ b/tools/scripts/make-asm-offsets @@ -0,0 +1,27 @@ +#!/bin/sh + +# Adapted from Linux kernel's "Kbuild": +# commit 1cdf25d704f7951d02a04064c97db547d6021872 +# Author: Christoph Lameter + +mkdir -p $(dirname $2) + +# Default sed regexp - multiline due to syntax constraints +SED_CMD="/^->/{s:->#\(.*\):/* \1 */:; \ + s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 (\2) /* \3 */:; \ + s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \ + s:->::; p;}" + +(set -e + echo "#ifndef __ASM_OFFSETS_H__" + echo "#define __ASM_OFFSETS_H__" + echo "/*" + echo " * DO NOT MODIFY." + echo " *" + echo " * This file was generated by $(basename $0)" + echo " *" + echo " */" + echo "" + sed -ne "${SED_CMD}" $1 + echo "" + echo "#endif" ) > $2 From 25ddd1fb0a2281b182529afbc8fda5de2dc16d96 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 26 Oct 2010 14:34:52 +0200 Subject: [PATCH 083/116] Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk Acked-by: Kumar Gala --- arch/arm/cpu/arm1136/start.S | 9 +++++---- arch/arm/cpu/arm1176/start.S | 9 +++++---- arch/arm/cpu/arm720t/start.S | 8 ++++---- arch/arm/cpu/arm920t/start.S | 7 ++++--- arch/arm/cpu/arm925t/start.S | 8 ++++---- arch/arm/cpu/arm926ejs/start.S | 8 ++++---- arch/arm/cpu/arm946es/start.S | 8 ++++---- arch/arm/cpu/arm_intcm/start.S | 8 ++++---- arch/arm/cpu/armv7/start.S | 9 +++++---- arch/arm/cpu/ixp/start.S | 7 ++++--- arch/arm/cpu/lh7a40x/start.S | 9 ++++----- arch/arm/cpu/pxa/start.S | 5 +++-- arch/arm/cpu/s3c44b0/start.S | 5 ++--- arch/arm/cpu/sa1100/start.S | 9 ++++----- arch/arm/include/asm/global_data.h | 2 +- arch/arm/lib/interrupts.c | 2 +- arch/avr32/cpu/start.S | 1 + arch/avr32/include/asm/global_data.h | 2 +- arch/blackfin/include/asm/config.h | 5 +---- arch/blackfin/include/asm/global_data.h | 2 +- arch/blackfin/lib/board.c | 4 ++-- arch/i386/include/asm/global_data.h | 2 +- arch/m68k/cpu/mcf5227x/start.S | 1 + arch/m68k/cpu/mcf523x/start.S | 1 + arch/m68k/cpu/mcf52x2/start.S | 1 + arch/m68k/cpu/mcf532x/start.S | 1 + arch/m68k/cpu/mcf5445x/start.S | 1 + arch/m68k/cpu/mcf547x_8x/start.S | 1 + arch/m68k/include/asm/global_data.h | 2 +- arch/microblaze/cpu/start.S | 1 + arch/microblaze/include/asm/global_data.h | 2 +- arch/microblaze/lib/board.c | 2 +- arch/mips/cpu/cache.S | 1 + arch/mips/cpu/start.S | 1 + arch/mips/include/asm/global_data.h | 2 +- arch/nios2/cpu/start.S | 2 +- arch/nios2/lib/board.c | 2 +- arch/powerpc/cpu/74xx_7xx/start.S | 1 + arch/powerpc/cpu/mpc512x/start.S | 1 + arch/powerpc/cpu/mpc5xx/start.S | 1 + arch/powerpc/cpu/mpc5xxx/start.S | 1 + arch/powerpc/cpu/mpc8220/start.S | 1 + arch/powerpc/cpu/mpc824x/start.S | 1 + arch/powerpc/cpu/mpc8260/start.S | 1 + arch/powerpc/cpu/mpc83xx/start.S | 1 + arch/powerpc/cpu/mpc85xx/release.S | 1 + arch/powerpc/cpu/mpc85xx/start.S | 1 + arch/powerpc/cpu/mpc86xx/start.S | 1 + arch/powerpc/cpu/mpc8xx/start.S | 1 + arch/powerpc/cpu/ppc4xx/start.S | 3 ++- arch/powerpc/include/asm/global_data.h | 2 +- arch/sh/cpu/sh2/start.S | 5 +++-- arch/sh/cpu/sh3/start.S | 5 +++-- arch/sh/cpu/sh4/start.S | 5 +++-- arch/sh/lib/board.c | 4 ++-- arch/sparc/cpu/leon2/start.S | 1 + arch/sparc/cpu/leon3/start.S | 1 + arch/sparc/include/asm/global_data.h | 2 +- arch/sparc/lib/board.c | 2 +- board/amcc/bamboo/init.S | 1 + board/amcc/bluestone/init.S | 1 + board/amcc/canyonlands/init.S | 1 + board/amcc/sequoia/init.S | 1 + board/amcc/yosemite/init.S | 1 + board/barco/early_init.S | 1 + board/esd/du440/init.S | 1 + board/esd/pmc440/init.S | 1 + board/fads/fads.h | 3 +-- board/gdsys/gdppc440etx/init.S | 1 + board/gdsys/intip/init.S | 1 + board/hidden_dragon/early_init.S | 1 + board/korat/init.S | 1 + board/lwmon5/init.S | 1 + board/pcs440ep/init.S | 1 + board/prodrive/alpr/init.S | 1 + board/sandpoint/early_init.S | 1 + board/t3corp/init.S | 1 + common/cmd_bdinfo.c | 2 +- include/asm-offsets.h | 4 ++++ include/common.h | 1 + include/configs/A3000.h | 4 +--- include/configs/ADCIOP.h | 3 +-- include/configs/AMX860.h | 3 +-- include/configs/AP1000.h | 3 +-- include/configs/APC405.h | 3 +-- include/configs/AR405.h | 3 +-- include/configs/ASH405.h | 3 +-- include/configs/ATUM8548.h | 3 +-- include/configs/Adder.h | 3 +-- include/configs/Alaska8220.h | 3 +-- include/configs/B2.h | 1 - include/configs/BAB7xx.h | 3 +-- include/configs/BC3450.h | 3 +-- include/configs/BMW.h | 3 +-- include/configs/CANBT.h | 3 +-- include/configs/CATcenter.h | 3 +-- include/configs/CMS700.h | 3 +-- include/configs/CPC45.h | 3 +-- include/configs/CPCI2DP.h | 3 +-- include/configs/CPCI405.h | 3 +-- include/configs/CPCI4052.h | 3 +-- include/configs/CPCI405AB.h | 3 +-- include/configs/CPCI405DT.h | 3 +-- include/configs/CPCI750.h | 3 +-- include/configs/CPCIISER4.h | 3 +-- include/configs/CPU86.h | 3 +-- include/configs/CPU87.h | 3 +-- include/configs/CRAYL1.h | 6 ++---- include/configs/CU824.h | 3 +-- include/configs/DASA_SIM.h | 3 +-- include/configs/DB64360.h | 3 +-- include/configs/DB64460.h | 3 +-- include/configs/DP405.h | 3 +-- include/configs/DU405.h | 3 +-- include/configs/DU440.h | 3 +-- include/configs/EB+MCF-EV123.h | 3 +-- include/configs/ELPPC.h | 3 +-- include/configs/ELPT860.h | 3 +-- include/configs/EP88x.h | 3 +-- include/configs/ERIC.h | 3 +-- include/configs/ESTEEM192E.h | 3 +-- include/configs/ETX094.h | 3 +-- include/configs/EVB64260.h | 3 +-- include/configs/EXBITGEN.h | 3 +-- include/configs/FADS823.h | 3 +-- include/configs/FADS850SAR.h | 3 +-- include/configs/FLAGADM.h | 3 +-- include/configs/FPS850L.h | 3 +-- include/configs/FPS860L.h | 3 +-- include/configs/G2000.h | 3 +-- include/configs/GENIETV.h | 3 +-- include/configs/HH405.h | 3 +-- include/configs/HIDDEN_DRAGON.h | 6 ++---- include/configs/HUB405.h | 3 +-- include/configs/IAD210.h | 3 +-- include/configs/ICU862.h | 3 +-- include/configs/IDS8247.h | 3 +-- include/configs/IP860.h | 3 +-- include/configs/IPHASE4539.h | 3 +-- include/configs/ISPAN.h | 3 +-- include/configs/IVML24.h | 3 +-- include/configs/IVMS8.h | 3 +-- include/configs/IceCube.h | 3 +-- include/configs/JSE.h | 3 +-- include/configs/KAREF.h | 3 +-- include/configs/KUP4K.h | 3 +-- include/configs/KUP4X.h | 3 +-- include/configs/LANTEC.h | 3 +-- include/configs/M5208EVBE.h | 3 +-- include/configs/M52277EVB.h | 3 +-- include/configs/M5235EVB.h | 3 +-- include/configs/M5249EVB.h | 3 +-- include/configs/M5253DEMO.h | 3 +-- include/configs/M5253EVBE.h | 3 +-- include/configs/M5271EVB.h | 3 +-- include/configs/M5272C3.h | 3 +-- include/configs/M5275EVB.h | 3 +-- include/configs/M5282EVB.h | 3 +-- include/configs/M53017EVB.h | 3 +-- include/configs/M5329EVB.h | 3 +-- include/configs/M5373EVB.h | 3 +-- include/configs/M54451EVB.h | 3 +-- include/configs/M54455EVB.h | 3 +-- include/configs/M5475EVB.h | 3 +-- include/configs/M5485EVB.h | 3 +-- include/configs/MBX.h | 3 +-- include/configs/MBX860T.h | 3 +-- include/configs/METROBOX.h | 3 +-- include/configs/MHPC.h | 3 +-- include/configs/MIP405.h | 3 +-- include/configs/ML2.h | 3 +-- include/configs/MOUSSE.h | 3 +-- include/configs/MPC8260ADS.h | 3 +-- include/configs/MPC8266ADS.h | 3 +-- include/configs/MPC8308RDB.h | 3 +-- include/configs/MPC8313ERDB.h | 3 +-- include/configs/MPC8315ERDB.h | 3 +-- include/configs/MPC8323ERDB.h | 3 +-- include/configs/MPC832XEMDS.h | 3 +-- include/configs/MPC8349EMDS.h | 3 +-- include/configs/MPC8349ITX.h | 3 +-- include/configs/MPC8360EMDS.h | 3 +-- include/configs/MPC8360ERDK.h | 3 +-- include/configs/MPC837XEMDS.h | 3 +-- include/configs/MPC837XERDB.h | 3 +-- include/configs/MPC8536DS.h | 3 +-- include/configs/MPC8540ADS.h | 3 +-- include/configs/MPC8540EVAL.h | 3 +-- include/configs/MPC8541CDS.h | 3 +-- include/configs/MPC8544DS.h | 3 +-- include/configs/MPC8548CDS.h | 3 +-- include/configs/MPC8555CDS.h | 3 +-- include/configs/MPC8560ADS.h | 3 +-- include/configs/MPC8568MDS.h | 3 +-- include/configs/MPC8569MDS.h | 3 +-- include/configs/MPC8572DS.h | 3 +-- include/configs/MPC8610HPCD.h | 3 +-- include/configs/MPC8641HPCN.h | 3 +-- include/configs/MUSENKI.h | 4 +--- include/configs/MVBC_P.h | 3 +-- include/configs/MVBLM7.h | 3 +-- include/configs/MVBLUE.h | 3 +-- include/configs/MVS1.h | 3 +-- include/configs/MVSMR.h | 3 +-- include/configs/MigoR.h | 1 - include/configs/NETPHONE.h | 3 +-- include/configs/NETTA.h | 3 +-- include/configs/NETTA2.h | 3 +-- include/configs/NETVIA.h | 3 +-- include/configs/NSCU.h | 3 +-- include/configs/NX823.h | 3 +-- include/configs/OCRTC.h | 3 +-- include/configs/ORSG.h | 3 +-- include/configs/OXC.h | 3 +-- include/configs/P1022DS.h | 3 +-- include/configs/P1_P2_RDB.h | 3 +-- include/configs/P2020DS.h | 3 +-- include/configs/P3G4.h | 3 +-- include/configs/PATI.h | 3 +-- include/configs/PCI405.h | 3 +-- include/configs/PCI5441.h | 3 +-- include/configs/PCIPPC2.h | 3 +-- include/configs/PCIPPC6.h | 3 +-- include/configs/PIP405.h | 3 +-- include/configs/PK1C20.h | 3 +-- include/configs/PLU405.h | 3 +-- include/configs/PM520.h | 3 +-- include/configs/PM826.h | 3 +-- include/configs/PM828.h | 3 +-- include/configs/PM854.h | 3 +-- include/configs/PM856.h | 3 +-- include/configs/PMC405.h | 3 +-- include/configs/PMC405DE.h | 3 +-- include/configs/PMC440.h | 3 +-- include/configs/PN62.h | 4 +--- include/configs/PPChameleonEVB.h | 3 +-- include/configs/QS823.h | 3 +-- include/configs/QS850.h | 3 +-- include/configs/QS860T.h | 3 +-- include/configs/R360MPI.h | 3 +-- include/configs/RBC823.h | 3 +-- include/configs/RPXClassic.h | 3 +-- include/configs/RPXlite.h | 3 +-- include/configs/RPXlite_DW.h | 3 +-- include/configs/RPXsuper.h | 3 +-- include/configs/RRvision.h | 3 +-- include/configs/Rattler.h | 3 +-- include/configs/SBC8540.h | 3 +-- include/configs/SCM.h | 3 +-- include/configs/SIMPC8313.h | 3 +-- include/configs/SM850.h | 3 +-- include/configs/SMN42.h | 1 - include/configs/SPD823TS.h | 3 +-- include/configs/SX1.h | 1 - include/configs/SXNI855T.h | 3 +-- include/configs/Sandpoint8240.h | 7 ++----- include/configs/Sandpoint8245.h | 7 ++----- include/configs/TASREG.h | 3 +-- include/configs/TB5200.h | 3 +-- include/configs/TK885D.h | 3 +-- include/configs/TOP5200.h | 3 +-- include/configs/TOP860.h | 3 +-- include/configs/TQM5200.h | 3 +-- include/configs/TQM823L.h | 3 +-- include/configs/TQM823M.h | 3 +-- include/configs/TQM8260.h | 3 +-- include/configs/TQM8272.h | 3 +-- include/configs/TQM834x.h | 3 +-- include/configs/TQM850L.h | 3 +-- include/configs/TQM850M.h | 3 +-- include/configs/TQM855L.h | 3 +-- include/configs/TQM855M.h | 3 +-- include/configs/TQM85xx.h | 3 +-- include/configs/TQM860L.h | 3 +-- include/configs/TQM860M.h | 3 +-- include/configs/TQM862L.h | 3 +-- include/configs/TQM862M.h | 3 +-- include/configs/TQM866M.h | 3 +-- include/configs/TQM885D.h | 3 +-- include/configs/Total5200.h | 3 +-- include/configs/VCMA9.h | 1 - include/configs/VOH405.h | 3 +-- include/configs/VOM405.h | 3 +-- include/configs/VoVPN-GW.h | 3 +-- include/configs/W7OLMC.h | 3 +-- include/configs/W7OLMG.h | 3 +-- include/configs/WUH405.h | 3 +-- include/configs/Yukon8220.h | 3 +-- include/configs/ZPC1900.h | 3 +-- include/configs/ZUMA.h | 3 +-- include/configs/a320evb.h | 1 - include/configs/a4m072.h | 3 +-- include/configs/acadia.h | 3 +-- include/configs/actux1.h | 1 - include/configs/actux2.h | 1 - include/configs/actux3.h | 1 - include/configs/actux4.h | 1 - include/configs/aev.h | 3 +-- include/configs/afeb9260.h | 1 - include/configs/alpr.h | 3 +-- include/configs/am3517_evm.h | 1 - include/configs/ap325rxa.h | 1 - include/configs/apollon.h | 1 - include/configs/aria.h | 3 +-- include/configs/armadillo.h | 1 - include/configs/assabet.h | 1 - include/configs/astro_mcf5373l.h | 3 +-- include/configs/at91cap9adk.h | 1 - include/configs/at91rm9200dk.h | 1 - include/configs/at91rm9200ek.h | 3 +-- include/configs/at91sam9260ek.h | 1 - include/configs/at91sam9261ek.h | 1 - include/configs/at91sam9263ek.h | 1 - include/configs/at91sam9m10g45ek.h | 1 - include/configs/at91sam9rlek.h | 1 - include/configs/atc.h | 3 +-- include/configs/balloon3.h | 3 +-- include/configs/bamboo.h | 3 +-- include/configs/barco.h | 6 ++---- include/configs/bluestone.h | 3 +-- include/configs/bubinga.h | 3 +-- include/configs/c2mon.h | 3 +-- include/configs/ca9x4_ct_vxp.h | 3 +-- include/configs/canmb.h | 3 +-- include/configs/canyonlands.h | 3 +-- include/configs/cerf250.h | 3 +-- include/configs/cm4008.h | 1 - include/configs/cm41xx.h | 1 - include/configs/cm5200.h | 3 +-- include/configs/cmc_pu2.h | 1 - include/configs/cmi_mpc5xx.h | 3 +-- include/configs/cobra5272.h | 3 +-- include/configs/cogent_mpc8260.h | 3 +-- include/configs/cogent_mpc8xx.h | 3 +-- include/configs/colibri_pxa270.h | 3 +-- include/configs/corenet_ds.h | 3 +-- include/configs/cpci5200.h | 3 +-- include/configs/cpu9260.h | 1 - include/configs/cpuat91.h | 1 - include/configs/cradle.h | 3 +-- include/configs/csb226.h | 3 +-- include/configs/csb272.h | 3 +-- include/configs/csb472.h | 3 +-- include/configs/csb637.h | 1 - include/configs/da830evm.h | 1 - include/configs/da850evm.h | 3 +-- include/configs/davinci_dm355evm.h | 1 - include/configs/davinci_dm355leopard.h | 1 - include/configs/davinci_dm365evm.h | 1 - include/configs/davinci_dm6467evm.h | 1 - include/configs/davinci_dvevm.h | 1 - include/configs/davinci_schmoogie.h | 1 - include/configs/davinci_sffsdr.h | 1 - include/configs/davinci_sonata.h | 1 - include/configs/debris.h | 7 ++----- include/configs/devkit8000.h | 1 - include/configs/digsy_mtc.h | 3 +-- include/configs/dlvision.h | 3 +-- include/configs/dnp1110.h | 1 - include/configs/eXalion.h | 3 +-- include/configs/eb_cpux9k2.h | 1 - include/configs/ebony.h | 3 +-- include/configs/edb93xx.h | 1 - include/configs/edminiv2.h | 3 +-- include/configs/ep7312.h | 1 - include/configs/ep8248.h | 3 +-- include/configs/ep8260.h | 3 +-- include/configs/ep82xxm.h | 3 +-- include/configs/espt.h | 1 - include/configs/evb4510.h | 1 - include/configs/galaxy5200.h | 3 +-- include/configs/gcplus.h | 1 - include/configs/gdppc440etx.h | 3 +-- include/configs/gr_cpci_ax2000.h | 5 ++--- include/configs/gr_ep2s60.h | 5 ++--- include/configs/gr_xc3s_1500.h | 5 ++--- include/configs/grsim.h | 5 ++--- include/configs/grsim_leon2.h | 5 ++--- include/configs/gw8260.h | 3 +-- include/configs/hcu4.h | 3 +-- include/configs/hcu5.h | 3 +-- include/configs/hermes.h | 3 +-- include/configs/hmi1001.h | 3 +-- include/configs/hymod.h | 3 +-- include/configs/icon.h | 3 +-- include/configs/idmr.h | 3 +-- include/configs/igep0020.h | 3 +-- include/configs/igep0030.h | 3 +-- include/configs/impa7.h | 1 - include/configs/imx27lite-common.h | 3 +-- include/configs/imx31_litekit.h | 3 +-- include/configs/imx31_phycore.h | 1 - include/configs/inka4x0.h | 3 +-- include/configs/innokom.h | 3 +-- include/configs/integratorap.h | 1 - include/configs/integratorcp.h | 1 - include/configs/intip.h | 3 +-- include/configs/ipek01.h | 3 +-- include/configs/ixdp425.h | 1 - include/configs/ixdpg425.h | 1 - include/configs/jadecpu.h | 1 - include/configs/jornada.h | 1 - include/configs/jupiter.h | 3 +-- include/configs/katmai.h | 3 +-- include/configs/kb9202.h | 1 - include/configs/kilauea.h | 3 +-- include/configs/km8xx.h | 3 +-- include/configs/km_arm.h | 3 +-- include/configs/kmeter1.h | 3 +-- include/configs/korat.h | 3 +-- include/configs/kvme080.h | 3 +-- include/configs/lart.h | 1 - include/configs/linkstation.h | 3 +-- include/configs/lpc2292sodimm.h | 1 - include/configs/lpd7a400.h | 1 - include/configs/lpd7a404.h | 1 - include/configs/luan.h | 3 +-- include/configs/lubbock.h | 3 +-- include/configs/lwmon.h | 3 +-- include/configs/lwmon5.h | 3 +-- include/configs/m501sk.h | 1 - include/configs/makalu.h | 3 +-- include/configs/manroland/mpc5200-common.h | 3 +-- include/configs/mcc200.h | 3 +-- include/configs/mcu25.h | 3 +-- include/configs/mecp5123.h | 3 +-- include/configs/mecp5200.h | 3 +-- include/configs/meesc.h | 1 - include/configs/mgcoge.h | 3 +-- include/configs/microblaze-generic.h | 5 ++--- include/configs/modnet50.h | 1 - include/configs/motionpro.h | 3 +-- include/configs/mp2usb.h | 1 - include/configs/mpc5121-common.h | 3 +-- include/configs/mpc5121ads.h | 3 +-- include/configs/mpc7448hpc2.h | 3 +-- include/configs/mpc8308_p1m.h | 3 +-- include/configs/mpr2.h | 1 - include/configs/ms7720se.h | 1 - include/configs/ms7722se.h | 1 - include/configs/ms7750se.h | 1 - include/configs/muas3001.h | 3 +-- include/configs/munices.h | 3 +-- include/configs/mv-common.h | 1 - include/configs/mx1ads.h | 1 - include/configs/mx1fs2.h | 1 - include/configs/mx31ads.h | 1 - include/configs/mx31pdk.h | 1 - include/configs/mx51evk.h | 1 - include/configs/neo.h | 3 +-- include/configs/netstar.h | 1 - include/configs/nhk8815.h | 1 - include/configs/nios2-generic.h | 3 +-- include/configs/ns9750dev.h | 1 - include/configs/o2dnt.h | 3 +-- include/configs/ocotea.h | 3 +-- include/configs/omap1510inn.h | 1 - include/configs/omap1610h2.h | 1 - include/configs/omap1610inn.h | 1 - include/configs/omap2420h4.h | 1 - include/configs/omap3_beagle.h | 3 +-- include/configs/omap3_evm.h | 1 - include/configs/omap3_overo.h | 3 +-- include/configs/omap3_pandora.h | 1 - include/configs/omap3_sdp3430.h | 1 - include/configs/omap3_zoom1.h | 1 - include/configs/omap3_zoom2.h | 1 - include/configs/omap4_panda.h | 3 +-- include/configs/omap4_sdp4430.h | 3 +-- include/configs/omap5912osk.h | 1 - include/configs/omap730p2.h | 1 - include/configs/otc570.h | 1 - include/configs/p3mx.h | 3 +-- include/configs/p3p440.h | 3 +-- include/configs/palmld.h | 3 +-- include/configs/palmtc.h | 3 +-- include/configs/pcm030.h | 3 +-- include/configs/pcs440ep.h | 3 +-- include/configs/pdnb3.h | 1 - include/configs/pf5200.h | 3 +-- include/configs/pleb2.h | 3 +-- include/configs/pm9261.h | 1 - include/configs/pm9263.h | 1 - include/configs/pm9g45.h | 1 - include/configs/ppmc7xx.h | 5 ++--- include/configs/ppmc8260.h | 3 +-- include/configs/pxa255_idp.h | 3 +-- include/configs/qong.h | 3 +-- include/configs/quad100hd.h | 3 +-- include/configs/quantum.h | 3 +-- include/configs/r2dplus.h | 1 - include/configs/r7780mp.h | 1 - include/configs/redwood.h | 3 +-- include/configs/rmu.h | 3 +-- include/configs/rsdproto.h | 3 +-- include/configs/rsk7203.h | 1 - include/configs/s5p_goni.h | 1 - include/configs/sacsng.h | 3 +-- include/configs/sbc2410x.h | 1 - include/configs/sbc35_a9g20.h | 1 - include/configs/sbc405.h | 3 +-- include/configs/sbc8240.h | 3 +-- include/configs/sbc8260.h | 3 +-- include/configs/sbc8349.h | 3 +-- include/configs/sbc8548.h | 3 +-- include/configs/sbc8560.h | 3 +-- include/configs/sbc8641d.h | 3 +-- include/configs/sc3.h | 3 +-- include/configs/scb9328.h | 1 - include/configs/sequoia.h | 3 +-- include/configs/sh7763rdp.h | 1 - include/configs/sh7785lcr.h | 1 - include/configs/shannon.h | 1 - include/configs/smdk2400.h | 1 - include/configs/smdk2410.h | 1 - include/configs/smdk6400.h | 1 - include/configs/smdkc100.h | 1 - include/configs/socrates.h | 3 +-- include/configs/sorcery.h | 3 +-- include/configs/spc1920.h | 3 +-- include/configs/spear-common.h | 1 - include/configs/spieval.h | 3 +-- include/configs/stxgp3.h | 3 +-- include/configs/stxssa.h | 3 +-- include/configs/stxxtc.h | 3 +-- include/configs/svm_sc8xx.h | 3 +-- include/configs/t3corp.h | 3 +-- include/configs/taihu.h | 3 +-- include/configs/taishan.h | 3 +-- include/configs/tnetv107x_evm.h | 1 - include/configs/tny_a9260.h | 1 - include/configs/trab.h | 1 - include/configs/trizepsiv.h | 3 +-- include/configs/tx25.h | 3 +-- include/configs/uc100.h | 3 +-- include/configs/utx8245.h | 3 +-- include/configs/v37.h | 3 +-- include/configs/v38b.h | 3 +-- include/configs/ve8313.h | 3 +-- include/configs/versatile.h | 1 - include/configs/virtlab2.h | 3 +-- include/configs/vision2.h | 3 +-- include/configs/vme8349.h | 3 +-- include/configs/voiceblue.h | 1 - include/configs/vpac270.h | 3 +-- include/configs/walnut.h | 3 +-- include/configs/xaeniax.h | 3 +-- include/configs/xilinx-ppc.h | 3 +-- include/configs/xm250.h | 3 +-- include/configs/xpedite1000.h | 3 +-- include/configs/xpedite517x.h | 3 +-- include/configs/xpedite520x.h | 3 +-- include/configs/xpedite537x.h | 3 +-- include/configs/xpedite550x.h | 3 +-- include/configs/yosemite.h | 3 +-- include/configs/yucca.h | 3 +-- include/configs/zeus.h | 3 +-- include/configs/zipitz2.h | 3 +-- include/configs/zylonite.h | 3 +-- lib/asm-offsets.c | 4 ++++ 560 files changed, 518 insertions(+), 956 deletions(-) diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 1d4637d5063..07d0c859cb8 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -28,6 +28,7 @@ * MA 02111-1307 USA */ +#include #include #include .globl _start @@ -380,7 +381,7 @@ stack_setup: sub sp, r0, #128 /* leave 32 words for abort-stack */ #else sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif @@ -510,7 +511,7 @@ cpu_init_crit: #else adr r2, _start sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack #endif ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -547,7 +548,7 @@ cpu_init_crit: #else adr r13, _start @ setup our mode stack (enter in banked mode) sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack + sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack #endif str lr, [r13] @ save caller lr in position 0 of saved stack @@ -569,7 +570,7 @@ cpu_init_crit: #else ldr r0, _armboot_start @ get data regions start sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move past gbl and a couple spots for abort stack + sub r0, r0, #(GENERATED_GBL_DATA_SIZE+8) @ move past gbl and a couple spots for abort stack #endif str lr, [r0] @ save caller lr in position 0 of saved stack mrs r0, spsr @ get the spsr diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 24e5bf4fff5..c13ccebf895 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -30,6 +30,7 @@ * Base codes by scsuh (sc.suh) */ +#include #include #include #ifdef CONFIG_ENABLE_MMU @@ -546,7 +547,7 @@ skip_hw_init: stack_setup: ldr r0, =CONFIG_SYS_UBOOT_BASE /* base of copy in DRAM */ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ sub sp, r0, #12 /* leave 3 words for abort-stack */ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ @@ -663,7 +664,7 @@ phy_last_jump: ldr r2, _armboot_start sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) /* set base 2 words into abort stack */ - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) + sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) #else ldr r2, IRQ_STACK_START_IN #endif @@ -687,7 +688,7 @@ phy_last_jump: /* move past malloc pool */ sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) /* move to reserved a couple spots for abort stack */ - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8) + sub r13, r13, #(GENERATED_GBL_DATA_SIZE + 8) #else ldr r13, IRQ_STACK_START_IN @ setup our mode stack #endif @@ -721,7 +722,7 @@ phy_last_jump: /* move past malloc pool */ sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) /* move past gbl and a couple spots for abort stack */ - sub r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8) + sub r0, r0, #(GENERATED_GBL_DATA_SIZE + 8) #else ldr r13, IRQ_STACK_START_IN @ setup our mode stack #endif diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index d93911f566b..06aa3a25d41 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -23,7 +23,7 @@ * MA 02111-1307 USA */ - +#include #include #include #include @@ -327,7 +327,7 @@ copy_loop: stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif @@ -609,7 +609,7 @@ lock_loop: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, _armboot_start sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack #else ldr r2, IRQ_STACK_START_IN #endif @@ -646,7 +646,7 @@ lock_loop: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, _armboot_start @ setup our mode stack sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack + sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack #else ldr r13, IRQ_STACK_START_IN @ setup our mode stack #endif diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 343a760df41..84f754677f6 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -24,6 +24,7 @@ * MA 02111-1307 USA */ +#include #include #include @@ -414,7 +415,7 @@ copy_loop: stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif @@ -529,7 +530,7 @@ cpu_init_crit: sub r2, r2, #(CONFIG_STACKSIZE) sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) /* set base 2 words into abort stack */ - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) + sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) #else ldr r2, IRQ_STACK_START_IN #endif @@ -569,7 +570,7 @@ cpu_init_crit: sub r13, r13, #(CONFIG_STACKSIZE) sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) /* reserve a couple spots in abort stack */ - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) + sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) #else ldr r13, IRQ_STACK_START_IN @ setup our mode stack #endif diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index cf18a016640..f45ad891bc2 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -30,7 +30,7 @@ * MA 02111-1307 USA */ - +#include #include #include @@ -385,7 +385,7 @@ copy_loop: stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif @@ -492,7 +492,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, _armboot_start sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack #else ldr r2, IRQ_STACK_START_IN #endif @@ -529,7 +529,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, _armboot_start @ setup our mode stack sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack + sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack #else ldr r13, IRQ_STACK_START_IN #endif diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index e1c1508fb3f..69e1a33174f 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -31,7 +31,7 @@ * MA 02111-1307 USA */ - +#include #include #include #include @@ -349,7 +349,7 @@ stack_setup: sub sp, r0, #128 /* leave 32 words for abort-stack */ #ifndef CONFIG_PRELOADER sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif @@ -475,7 +475,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) adr r2, _start sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack #else ldr r2, IRQ_STACK_START_IN #endif @@ -513,7 +513,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) adr r13, _start @ setup our mode stack sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack + sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack #else ldr r13, IRQ_STACK_START_IN @ setup our mode stack #endif diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 077886f36f4..25b573bcdf4 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -30,7 +30,7 @@ * MA 02111-1307 USA */ - +#include #include #include @@ -316,7 +316,7 @@ copy_loop: stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif @@ -427,7 +427,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, _armboot_start sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack #else ldr r2, IRQ_STACK_START_IN #endif @@ -465,7 +465,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, _armboot_start @ setup our mode stack sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack + sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack #else ldr r13, IRQ_STACK_START_IN @ setup our mode stack #endif diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index 07356cb5fd0..3e9d5e8c93d 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -30,7 +30,7 @@ * MA 02111-1307 USA */ - +#include #include #include @@ -312,7 +312,7 @@ copy_loop: stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif @@ -403,7 +403,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, _armboot_start sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack #else ldr r2, IRQ_STACK_START_IN #endif @@ -441,7 +441,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, _armboot_start @ setup our mode stack sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack + sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack #else ldr r13, IRQ_STACK_START_IN @ setup our mode stack #endif diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index ef6c32d137b..b9eb0c9b586 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -29,6 +29,7 @@ * MA 02111-1307 USA */ +#include #include #include @@ -357,7 +358,7 @@ copy_loop: @ copy 32 bytes at a time stack_setup: ldr r0, _TEXT_BASE @ upper 128 KiB: relocated uboot sub r0, r0, #CONFIG_SYS_MALLOC_LEN @ malloc area - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE @ bdinfo + sub r0, r0, #GENERATED_GBL_DATA_SIZE @ bdinfo #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ) #endif @@ -464,7 +465,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, _armboot_start sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ set base 2 words into abort + sub r2, r2, #(GENERATED_GBL_DATA_SIZE + 8) @ set base 2 words into abort #else ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort @ stack @@ -507,7 +508,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, _armboot_start @ setup our mode stack (enter sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ move to reserved a couple + sub r13, r13, #(GENERATED_GBL_DATA_SIZE + 8) @ move to reserved a couple #else ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter @ in banked mode) @@ -535,7 +536,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r0, _armboot_start @ get data regions start sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ move past gbl and a couple + sub r0, r0, #(GENERATED_GBL_DATA_SIZE + 8) @ move past gbl and a couple #else ldr r0, IRQ_STACK_START_IN @ get data regions start @ spots for abort stack diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index 836c33ba8b2..2931ccd6167 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -27,6 +27,7 @@ * MA 02111-1307 USA */ +#include #include #include #include @@ -555,7 +556,7 @@ copy_loop: stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif @@ -620,7 +621,7 @@ _start_armboot: .word start_armboot #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, _armboot_start sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack #else ldr r2, IRQ_STACK_START_IN #endif @@ -661,7 +662,7 @@ _start_armboot: .word start_armboot #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, _armboot_start @ setup our mode stack sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack + sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack #else ldr r13, IRQ_STACK_START_IN @ setup our mode stack #endif diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S index d944860fca7..703baf89a20 100644 --- a/arch/arm/cpu/lh7a40x/start.S +++ b/arch/arm/cpu/lh7a40x/start.S @@ -24,11 +24,10 @@ * MA 02111-1307 USA */ - +#include #include #include - /* ************************************************************************* * @@ -349,7 +348,7 @@ copy_loop: stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif @@ -464,7 +463,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, _armboot_start sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack #else ldr r2, IRQ_STACK_START_IN #endif @@ -501,7 +500,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, _armboot_start @ setup our mode stack sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack + sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack #else ldr r13, IRQ_STACK_START_IN @ setup our mode stack #endif diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 3c5bd84e360..b8065b70df5 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -29,6 +29,7 @@ * MA 02111-1307 USA */ +#include #include #include #include @@ -419,7 +420,7 @@ reset: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, _armboot_start sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack #else ldr r2, IRQ_STACK_START_IN #endif @@ -460,7 +461,7 @@ reset: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, _armboot_start @ setup our mode stack sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack + sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack #else ldr r13, IRQ_STACK_START_IN @ setup our mode stack #endif diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index 20091b24c0e..77f3735e54e 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -27,11 +27,10 @@ * MA 02111-1307 USA */ - +#include #include #include - /* * Jump vector table */ @@ -331,7 +330,7 @@ vector_copy_loop: stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 8eabb66caba..5635e0a30f5 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -25,11 +25,10 @@ * MA 02111-1307 USA */ - +#include #include #include - /* ************************************************************************* * @@ -301,7 +300,7 @@ copy_loop: stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif @@ -445,7 +444,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, _armboot_start sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack #else ldr r2, IRQ_STACK_START_IN #endif @@ -482,7 +481,7 @@ cpu_init_crit: #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, _armboot_start @ setup our mode stack sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack + sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack #else ldr r13, IRQ_STACK_START_IN @ setup our mode stack #endif diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 6dae4328e68..5438ebc5fb7 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -30,7 +30,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c index 9a21e7b40a0..90aa04b87f3 100644 --- a/arch/arm/lib/interrupts.c +++ b/arch/arm/lib/interrupts.c @@ -50,7 +50,7 @@ int interrupt_init (void) IRQ_STACK_START = gd->irq_sp - 4; IRQ_STACK_START_IN = gd->irq_sp + 8; #else - IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4; + IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - GENERATED_GBL_DATA_SIZE - 4; #endif FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; diff --git a/arch/avr32/cpu/start.S b/arch/avr32/cpu/start.S index 06bf4c692d8..97140e93ebb 100644 --- a/arch/avr32/cpu/start.S +++ b/arch/avr32/cpu/start.S @@ -19,6 +19,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ +#include #include #include #include diff --git a/arch/avr32/include/asm/global_data.h b/arch/avr32/include/asm/global_data.h index 5a7aed94e14..4ef8fc570f3 100644 --- a/arch/avr32/include/asm/global_data.h +++ b/arch/avr32/include/asm/global_data.h @@ -29,7 +29,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h index 215e0f29183..34ca68c9d54 100644 --- a/arch/blackfin/include/asm/config.h +++ b/arch/blackfin/include/asm/config.h @@ -101,11 +101,8 @@ #ifndef CONFIG_SYS_MALLOC_BASE # define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) #endif -#ifndef CONFIG_SYS_GBL_DATA_SIZE -# define CONFIG_SYS_GBL_DATA_SIZE (128) -#endif #ifndef CONFIG_SYS_GBL_DATA_ADDR -# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) +# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - GENERATED_GBL_DATA_SIZE) #endif #ifndef CONFIG_STACKBASE # define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4) diff --git a/arch/blackfin/include/asm/global_data.h b/arch/blackfin/include/asm/global_data.h index d5514b0dffb..eba5e93e212 100644 --- a/arch/blackfin/include/asm/global_data.h +++ b/arch/blackfin/include/asm/global_data.h @@ -37,7 +37,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { bd_t *bd; diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index fcfd1746a59..8eca7d6fb64 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -237,12 +237,12 @@ void board_init_f(ulong bootflag) #endif #ifdef DEBUG - if (CONFIG_SYS_GBL_DATA_SIZE < sizeof(*gd)) + if (GENERATED_GBL_DATA_SIZE < sizeof(*gd)) hang(); #endif serial_early_puts("Init global data\n"); gd = (gd_t *) (CONFIG_SYS_GBL_DATA_ADDR); - memset((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE); + memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE); /* Board data initialization */ addr = (CONFIG_SYS_GBL_DATA_ADDR + sizeof(gd_t)); diff --git a/arch/i386/include/asm/global_data.h b/arch/i386/include/asm/global_data.h index 597112318f5..e3f8a25efb6 100644 --- a/arch/i386/include/asm/global_data.h +++ b/arch/i386/include/asm/global_data.h @@ -30,7 +30,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ #ifndef __ASSEMBLY__ diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S index ac710969bba..d09d49274eb 100644 --- a/arch/m68k/cpu/mcf5227x/start.S +++ b/arch/m68k/cpu/mcf5227x/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include "version.h" diff --git a/arch/m68k/cpu/mcf523x/start.S b/arch/m68k/cpu/mcf523x/start.S index 20b50e7579e..a726b59846d 100644 --- a/arch/m68k/cpu/mcf523x/start.S +++ b/arch/m68k/cpu/mcf523x/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include "version.h" diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S index d1f3d83270f..f0cfa6ffe05 100644 --- a/arch/m68k/cpu/mcf52x2/start.S +++ b/arch/m68k/cpu/mcf52x2/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include "version.h" diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S index a80b0a99464..53ac471a416 100644 --- a/arch/m68k/cpu/mcf532x/start.S +++ b/arch/m68k/cpu/mcf532x/start.S @@ -24,6 +24,7 @@ * MA 02111-1307 USA */ +#include #include #include #include "version.h" diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S index 8b69d1f46b3..5255f374d5e 100644 --- a/arch/m68k/cpu/mcf5445x/start.S +++ b/arch/m68k/cpu/mcf5445x/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include "version.h" diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S index 84118629e27..e30923fac7f 100644 --- a/arch/m68k/cpu/mcf547x_8x/start.S +++ b/arch/m68k/cpu/mcf547x_8x/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include "version.h" diff --git a/arch/m68k/include/asm/global_data.h b/arch/m68k/include/asm/global_data.h index 3a36f822548..fc486fda58d 100644 --- a/arch/m68k/include/asm/global_data.h +++ b/arch/m68k/include/asm/global_data.h @@ -30,7 +30,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 98c248fdb3c..d44903b2b8f 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -24,6 +24,7 @@ * MA 02111-1307 USA */ +#include #include .text diff --git a/arch/microblaze/include/asm/global_data.h b/arch/microblaze/include/asm/global_data.h index 03444ef339d..557ad27e9d4 100644 --- a/arch/microblaze/include/asm/global_data.h +++ b/arch/microblaze/include/asm/global_data.h @@ -31,7 +31,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index 84267cd7f5b..eeef579dcca 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -96,7 +96,7 @@ void board_init (void) ulong flash_size = 0; #endif asm ("nop"); /* FIXME gd is not initialize - wait */ - memset ((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE); + memset ((void *)gd, 0, GENERATED_GBL_DATA_SIZE); gd->bd = (bd_t *) (gd + 1); /* At end of global data */ gd->baudrate = CONFIG_BAUDRATE; bd = gd->bd; diff --git a/arch/mips/cpu/cache.S b/arch/mips/cpu/cache.S index ff4f11cf787..4b30c89b148 100644 --- a/arch/mips/cpu/cache.S +++ b/arch/mips/cpu/cache.S @@ -22,6 +22,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S index 57db589b94f..d6bcef6b562 100644 --- a/arch/mips/cpu/start.S +++ b/arch/mips/cpu/start.S @@ -22,6 +22,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h index bf1bfc390f8..271a290a51c 100644 --- a/arch/mips/include/asm/global_data.h +++ b/arch/mips/include/asm/global_data.h @@ -33,7 +33,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { diff --git a/arch/nios2/cpu/start.S b/arch/nios2/cpu/start.S index 76d3b521547..9b0f52da566 100644 --- a/arch/nios2/cpu/start.S +++ b/arch/nios2/cpu/start.S @@ -21,7 +21,7 @@ * MA 02111-1307 USA */ - +#include #include #include #include diff --git a/arch/nios2/lib/board.c b/arch/nios2/lib/board.c index f83e691a349..f6c6bc166b7 100644 --- a/arch/nios2/lib/board.c +++ b/arch/nios2/lib/board.c @@ -95,7 +95,7 @@ void board_init (void) /* compiler optimization barrier needed for GCC >= 3.4 */ __asm__ __volatile__("": : :"memory"); - memset( gd, 0, CONFIG_SYS_GBL_DATA_SIZE ); + memset( gd, 0, GENERATED_GBL_DATA_SIZE ); gd->bd = (bd_t *)(gd+1); /* At end of global data */ gd->baudrate = CONFIG_BAUDRATE; diff --git a/arch/powerpc/cpu/74xx_7xx/start.S b/arch/powerpc/cpu/74xx_7xx/start.S index b4121df6122..280781e165d 100644 --- a/arch/powerpc/cpu/74xx_7xx/start.S +++ b/arch/powerpc/cpu/74xx_7xx/start.S @@ -32,6 +32,7 @@ * board_init lies at a quite high address and when the cpu has * jumped there, everything is ok. */ +#include #include #include <74xx_7xx.h> #include diff --git a/arch/powerpc/cpu/mpc512x/start.S b/arch/powerpc/cpu/mpc512x/start.S index 2265c8cc110..fe35190e796 100644 --- a/arch/powerpc/cpu/mpc512x/start.S +++ b/arch/powerpc/cpu/mpc512x/start.S @@ -29,6 +29,7 @@ * U-Boot - Startup Code for MPC512x based Embedded Boards */ +#include #include #include #include diff --git a/arch/powerpc/cpu/mpc5xx/start.S b/arch/powerpc/cpu/mpc5xx/start.S index da42557224d..63449c3d4de 100644 --- a/arch/powerpc/cpu/mpc5xx/start.S +++ b/arch/powerpc/cpu/mpc5xx/start.S @@ -30,6 +30,7 @@ * */ +#include #include #include #include diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S index 92858fce3a4..ad546771fa3 100644 --- a/arch/powerpc/cpu/mpc5xxx/start.S +++ b/arch/powerpc/cpu/mpc5xxx/start.S @@ -25,6 +25,7 @@ /* * U-Boot - Startup Code for MPC5xxx CPUs */ +#include #include #include #include diff --git a/arch/powerpc/cpu/mpc8220/start.S b/arch/powerpc/cpu/mpc8220/start.S index b5c160b607a..b029e841788 100644 --- a/arch/powerpc/cpu/mpc8220/start.S +++ b/arch/powerpc/cpu/mpc8220/start.S @@ -25,6 +25,7 @@ /* * U-Boot - Startup Code for MPC8220 CPUs */ +#include #include #include #include diff --git a/arch/powerpc/cpu/mpc824x/start.S b/arch/powerpc/cpu/mpc824x/start.S index d10231ee948..616de58fb71 100644 --- a/arch/powerpc/cpu/mpc824x/start.S +++ b/arch/powerpc/cpu/mpc824x/start.S @@ -37,6 +37,7 @@ * board_init will change CS0 to be positioned at the correct * address and (s)dram will be positioned at address 0 */ +#include #include #include #include diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S index 55c64ea60c0..521a6399b2b 100644 --- a/arch/powerpc/cpu/mpc8260/start.S +++ b/arch/powerpc/cpu/mpc8260/start.S @@ -25,6 +25,7 @@ /* * U-Boot - Startup Code for MPC8260 PowerPC based Embedded Boards */ +#include #include #include #include diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index 403fda4b960..a35697da0a7 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -27,6 +27,7 @@ * U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards */ +#include #include #include #include diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 53cefaf002e..56a853ee572 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 7e5e6b17c01..291557d40d4 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -28,6 +28,7 @@ * */ +#include #include #include #include diff --git a/arch/powerpc/cpu/mpc86xx/start.S b/arch/powerpc/cpu/mpc86xx/start.S index 36004b78589..6127115696a 100644 --- a/arch/powerpc/cpu/mpc86xx/start.S +++ b/arch/powerpc/cpu/mpc86xx/start.S @@ -30,6 +30,7 @@ * board_init lies at a quite high address and when the cpu has * jumped there, everything is ok. */ +#include #include #include #include diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S index 4a8c5d9e48b..9d022bf5413 100644 --- a/arch/powerpc/cpu/mpc8xx/start.S +++ b/arch/powerpc/cpu/mpc8xx/start.S @@ -37,6 +37,7 @@ * board_init will change CS0 to be positioned at the correct * address and (s)dram will be positioned at address 0 */ +#include #include #include #include diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index 140bfc92087..363becc8071 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -63,6 +63,7 @@ * board_init will change CS0 to be positioned at the correct * address and (s)dram will be positioned at address 0 */ +#include #include #include #include @@ -1399,7 +1400,7 @@ relocate_code: /* Flush initial global data range */ mr r3, r4 - addi r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l + addi r4, r4, GENERATED_GBL_DATA_SIZE@l bl flush_dcache_range #if defined(CONFIG_SYS_INIT_DCACHE_CS) diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h index 2a323e13d08..2e218de0b7e 100644 --- a/arch/powerpc/include/asm/global_data.h +++ b/arch/powerpc/include/asm/global_data.h @@ -34,7 +34,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { diff --git a/arch/sh/cpu/sh2/start.S b/arch/sh/cpu/sh2/start.S index 0ab867d54d5..77043f686a0 100644 --- a/arch/sh/cpu/sh2/start.S +++ b/arch/sh/cpu/sh2/start.S @@ -18,6 +18,7 @@ * MA 02111-1307 USA */ +#include #include #include @@ -73,6 +74,6 @@ loop: ._reloc_dst_end: .long reloc_dst_end ._bss_start: .long bss_start ._bss_end: .long bss_end -._gd_init: .long (_start - CONFIG_SYS_GBL_DATA_SIZE) -._stack_init: .long (_start - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) +._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE) +._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) ._sh_generic_init: .long sh_generic_init diff --git a/arch/sh/cpu/sh3/start.S b/arch/sh/cpu/sh3/start.S index c0f83261d10..9dd23032657 100644 --- a/arch/sh/cpu/sh3/start.S +++ b/arch/sh/cpu/sh3/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include @@ -72,6 +73,6 @@ loop: ._reloc_dst_end: .long reloc_dst_end ._bss_start: .long bss_start ._bss_end: .long bss_end -._gd_init: .long (_start - CONFIG_SYS_GBL_DATA_SIZE) -._stack_init: .long (_start - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) +._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE) +._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) ._sh_generic_init: .long sh_generic_init diff --git a/arch/sh/cpu/sh4/start.S b/arch/sh/cpu/sh4/start.S index 711ae668d59..4b5f606fff7 100644 --- a/arch/sh/cpu/sh4/start.S +++ b/arch/sh/cpu/sh4/start.S @@ -18,6 +18,7 @@ * MA 02111-1307 USA */ +#include #include #include @@ -69,6 +70,6 @@ loop: ._reloc_dst_end: .long reloc_dst_end ._bss_start: .long bss_start ._bss_end: .long bss_end -._gd_init: .long (_start - CONFIG_SYS_GBL_DATA_SIZE) -._stack_init: .long (_start - CONFIG_SYS_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) +._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE) +._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) ._sh_generic_init: .long sh_generic_init diff --git a/arch/sh/lib/board.c b/arch/sh/lib/board.c index a302fc2e658..fe53ab4de91 100644 --- a/arch/sh/lib/board.c +++ b/arch/sh/lib/board.c @@ -89,7 +89,7 @@ static int sh_pci_init(void) static int sh_mem_env_init(void) { - mem_malloc_init(CONFIG_SYS_TEXT_BASE - CONFIG_SYS_GBL_DATA_SIZE - + mem_malloc_init(CONFIG_SYS_TEXT_BASE - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN - 16); env_relocate(); jumptable_init(); @@ -144,7 +144,7 @@ void sh_generic_init(void) bd_t *bd; init_fnc_t **init_fnc_ptr; - memset(gd, 0, CONFIG_SYS_GBL_DATA_SIZE); + memset(gd, 0, GENERATED_GBL_DATA_SIZE); gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ diff --git a/arch/sparc/cpu/leon2/start.S b/arch/sparc/cpu/leon2/start.S index dd58262c2b4..f22fb7eb1b7 100644 --- a/arch/sparc/cpu/leon2/start.S +++ b/arch/sparc/cpu/leon2/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/arch/sparc/cpu/leon3/start.S b/arch/sparc/cpu/leon3/start.S index 5c0808a2edb..56ae88d6492 100644 --- a/arch/sparc/cpu/leon3/start.S +++ b/arch/sparc/cpu/leon3/start.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/arch/sparc/include/asm/global_data.h b/arch/sparc/include/asm/global_data.h index 7c1ac0dddd4..9b146748d96 100644 --- a/arch/sparc/include/asm/global_data.h +++ b/arch/sparc/include/asm/global_data.h @@ -36,7 +36,7 @@ * global variables during system initialization (until we have set * up the memory controller so that we can use RAM). * - * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t) + * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t) */ typedef struct global_data { diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c index 09bcdb04813..4a6041f51ca 100644 --- a/arch/sparc/lib/board.c +++ b/arch/sparc/lib/board.c @@ -244,7 +244,7 @@ void board_init_f(ulong bootflag) printf("CONFIG_SYS_PROM_OFFSET: 0x%lx (%d)\n", CONFIG_SYS_PROM_OFFSET, CONFIG_SYS_PROM_SIZE); printf("CONFIG_SYS_GBL_DATA_OFFSET: 0x%lx (%d)\n", CONFIG_SYS_GBL_DATA_OFFSET, - CONFIG_SYS_GBL_DATA_SIZE); + GENERATED_GBL_DATA_SIZE); #endif #ifdef CONFIG_POST diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S index 6925921785e..3d9989d7f1a 100644 --- a/board/amcc/bamboo/init.S +++ b/board/amcc/bamboo/init.S @@ -23,6 +23,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/board/amcc/bluestone/init.S b/board/amcc/bluestone/init.S index e969fcfd905..4b90c8d0804 100644 --- a/board/amcc/bluestone/init.S +++ b/board/amcc/bluestone/init.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/board/amcc/canyonlands/init.S b/board/amcc/canyonlands/init.S index 64d5d422935..680feaa6a96 100644 --- a/board/amcc/canyonlands/init.S +++ b/board/amcc/canyonlands/init.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S index 7139aaee4d0..419ef4f9942 100644 --- a/board/amcc/sequoia/init.S +++ b/board/amcc/sequoia/init.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/board/amcc/yosemite/init.S b/board/amcc/yosemite/init.S index ed3741c54a9..d23cdc79d0d 100644 --- a/board/amcc/yosemite/init.S +++ b/board/amcc/yosemite/init.S @@ -19,6 +19,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/board/barco/early_init.S b/board/barco/early_init.S index 531dcdf4ae2..61b4b555342 100644 --- a/board/barco/early_init.S +++ b/board/barco/early_init.S @@ -25,6 +25,7 @@ #define __ASSEMBLY__ 1 #endif +#include #include #include #include diff --git a/board/esd/du440/init.S b/board/esd/du440/init.S index 351095a48a9..88565d91da7 100644 --- a/board/esd/du440/init.S +++ b/board/esd/du440/init.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/board/esd/pmc440/init.S b/board/esd/pmc440/init.S index 96f7206b307..b99a8e9792b 100644 --- a/board/esd/pmc440/init.S +++ b/board/esd/pmc440/init.S @@ -19,6 +19,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/board/fads/fads.h b/board/fads/fads.h index 08d4b791fcf..3dc535878df 100644 --- a/board/fads/fads.h +++ b/board/fads/fads.h @@ -165,8 +165,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/board/gdsys/gdppc440etx/init.S b/board/gdsys/gdppc440etx/init.S index ba750cb538b..4a40e4b0bb7 100644 --- a/board/gdsys/gdppc440etx/init.S +++ b/board/gdsys/gdppc440etx/init.S @@ -24,6 +24,7 @@ * MA 02111-1307 USA */ +#include #include #include diff --git a/board/gdsys/intip/init.S b/board/gdsys/intip/init.S index 5a819c2a30c..7513f1d3c32 100644 --- a/board/gdsys/intip/init.S +++ b/board/gdsys/intip/init.S @@ -25,6 +25,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/board/hidden_dragon/early_init.S b/board/hidden_dragon/early_init.S index 531dcdf4ae2..61b4b555342 100644 --- a/board/hidden_dragon/early_init.S +++ b/board/hidden_dragon/early_init.S @@ -25,6 +25,7 @@ #define __ASSEMBLY__ 1 #endif +#include #include #include #include diff --git a/board/korat/init.S b/board/korat/init.S index bfc6bc15253..3741277f60a 100644 --- a/board/korat/init.S +++ b/board/korat/init.S @@ -19,6 +19,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/board/lwmon5/init.S b/board/lwmon5/init.S index 8efc8a146e5..2014cd7b981 100644 --- a/board/lwmon5/init.S +++ b/board/lwmon5/init.S @@ -23,6 +23,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/board/pcs440ep/init.S b/board/pcs440ep/init.S index 9745c14e5a4..6bd8852a66f 100644 --- a/board/pcs440ep/init.S +++ b/board/pcs440ep/init.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S index 119bc534e7b..d9961dd1863 100644 --- a/board/prodrive/alpr/init.S +++ b/board/prodrive/alpr/init.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/board/sandpoint/early_init.S b/board/sandpoint/early_init.S index 531dcdf4ae2..61b4b555342 100644 --- a/board/sandpoint/early_init.S +++ b/board/sandpoint/early_init.S @@ -25,6 +25,7 @@ #define __ASSEMBLY__ 1 #endif +#include #include #include #include diff --git a/board/t3corp/init.S b/board/t3corp/init.S index ecd35ff7b6f..a24d6f3a0fb 100644 --- a/board/t3corp/init.S +++ b/board/t3corp/init.S @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include #include #include #include diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 1326c8fac19..51b75ffc5bb 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -192,7 +192,7 @@ int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) printf("CONFIG_SYS_PROM_OFFSET = 0x%lx (%d)\n", CONFIG_SYS_PROM_OFFSET, CONFIG_SYS_PROM_SIZE); printf("CONFIG_SYS_GBL_DATA_OFFSET = 0x%lx (%d)\n", CONFIG_SYS_GBL_DATA_OFFSET, - CONFIG_SYS_GBL_DATA_SIZE); + GENERATED_GBL_DATA_SIZE); #if defined(CONFIG_CMD_NET) print_eth(0); diff --git a/include/asm-offsets.h b/include/asm-offsets.h index ab28184054f..ad3bf1f0bd4 100644 --- a/include/asm-offsets.h +++ b/include/asm-offsets.h @@ -1,2 +1,6 @@ +#ifndef DO_DEPS_ONLY + #include /* #include */ + +#endif diff --git a/include/common.h b/include/common.h index 0686a173d52..189ad8122b6 100644 --- a/include/common.h +++ b/include/common.h @@ -35,6 +35,7 @@ typedef volatile unsigned short vu_short; typedef volatile unsigned char vu_char; #include +#include #include #include #include diff --git a/include/configs/A3000.h b/include/configs/A3000.h index 648aa0307f2..3d6014176c0 100644 --- a/include/configs/A3000.h +++ b/include/configs/A3000.h @@ -172,11 +172,9 @@ */ /* #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE */ -/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* diff --git a/include/configs/ADCIOP.h b/include/configs/ADCIOP.h index c4bc1515609..6f12c8ddc01 100644 --- a/include/configs/ADCIOP.h +++ b/include/configs/ADCIOP.h @@ -115,8 +115,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h index f5fa648ddb4..e7c6f968368 100644 --- a/include/configs/AMX860.h +++ b/include/configs/AMX860.h @@ -139,8 +139,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h index 31df89c82a9..9e5490d1df4 100644 --- a/include/configs/AP1000.h +++ b/include/configs/AP1000.h @@ -210,8 +210,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x400000 /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/APC405.h b/include/configs/APC405.h index af3223bdfef..0adf3ed2a02 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -421,8 +421,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved bytes for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* reserve some memory for BOOT limit info */ #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 16) diff --git a/include/configs/AR405.h b/include/configs/AR405.h index 1f7e79e92ec..4963e9f688e 100644 --- a/include/configs/AR405.h +++ b/include/configs/AR405.h @@ -267,8 +267,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index a818070a4be..ee80d9d8f23 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -326,8 +326,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h index 261aff1fc9c..78757ecced2 100644 --- a/include/configs/ATUM8548.h +++ b/include/configs/ATUM8548.h @@ -195,8 +195,7 @@ #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/Adder.h b/include/configs/Adder.h index 71e36c69be7..48e6df5c279 100644 --- a/include/configs/Adder.h +++ b/include/configs/Adder.h @@ -171,8 +171,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h index 7ede3186c4c..e0509928172 100644 --- a/include/configs/Alaska8220.h +++ b/include/configs/Alaska8220.h @@ -248,8 +248,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/B2.h b/include/configs/B2.h index ca7350dc40d..7846a925c86 100644 --- a/include/configs/B2.h +++ b/include/configs/B2.h @@ -53,7 +53,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ #define CONFIG_ENV_SIZE 1024 /* 1024 bytes may be used for env vars*/ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024 ) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h index c557197fed1..1497cae0954 100644 --- a/include/configs/BAB7xx.h +++ b/include/configs/BAB7xx.h @@ -200,8 +200,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index 563da6883e7..a8338937281 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -389,8 +389,7 @@ # define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif /*CONFIG_POST*/ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/BMW.h b/include/configs/BMW.h index 234cc2051fb..8398b290bf2 100644 --- a/include/configs/BMW.h +++ b/include/configs/BMW.h @@ -151,8 +151,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h index d67b659e46d..b27ef64fbe4 100644 --- a/include/configs/CANBT.h +++ b/include/configs/CANBT.h @@ -224,8 +224,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00ef0000 /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 7442e3cd4d0..ac70d158e7e 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -516,8 +516,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 34478bbdc90..daaf62440c5 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -288,8 +288,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index 8502542fe2e..6a88d26511d 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -153,11 +153,10 @@ /* Size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * NS16550 Configuration diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index b5edc03e775..99ace67a2f3 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -260,8 +260,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index df45b12af67..426fc57a650 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -336,8 +336,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */ #endif #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 9a4e5f89e40..8f48ded2385 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -397,8 +397,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index fb14cd3bad5..a042abf1574 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -389,8 +389,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 70af2da7d9b..9b99ba8664f 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -392,8 +392,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index 76172eb2dc5..92ffaaaf19e 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -267,8 +267,7 @@ /* #define CONFIG_SYS_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */ #define CONFIG_SYS_INIT_RAM_ADDR 0xf1080000 /* unused memory region */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define RELOCATE_INTERNAL_RAM_ADDR #ifdef RELOCATE_INTERNAL_RAM_ADDR diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index f9badc0f77b..b2ee8732954 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -250,8 +250,7 @@ #define CONFIG_SYS_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h index 7662b52607c..ab64adae0e9 100644 --- a/include/configs/CPU86.h +++ b/include/configs/CPU86.h @@ -297,8 +297,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index 18fdb905565..2b1716afeef 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -312,8 +312,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index 146540a1ee6..885d42b337e 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -229,16 +229,14 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #else #define CONFIG_SYS_OCM_DATA_ADDR 0xF0000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of On Chip SRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of On Chip SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif diff --git a/include/configs/CU824.h b/include/configs/CU824.h index 14970e01d36..a5c2ce5e879 100644 --- a/include/configs/CU824.h +++ b/include/configs/CU824.h @@ -141,11 +141,10 @@ /* Size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * NS16550 Configuration diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h index 3d6b95afc66..3706071c996 100644 --- a/include/configs/DASA_SIM.h +++ b/include/configs/DASA_SIM.h @@ -116,8 +116,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h index ba5adda3b12..dbd224cc2c6 100644 --- a/include/configs/DB64360.h +++ b/include/configs/DB64360.h @@ -353,8 +353,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* unused memory region */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define RELOCATE_INTERNAL_RAM_ADDR #ifdef RELOCATE_INTERNAL_RAM_ADDR diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h index 6586f232e91..321692bc509 100644 --- a/include/configs/DB64460.h +++ b/include/configs/DB64460.h @@ -291,8 +291,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* unused memory region */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define RELOCATE_INTERNAL_RAM_ADDR #ifdef RELOCATE_INTERNAL_RAM_ADDR diff --git a/include/configs/DP405.h b/include/configs/DP405.h index 2bf0799e8b3..ecdf93ffc07 100644 --- a/include/configs/DP405.h +++ b/include/configs/DP405.h @@ -230,8 +230,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/DU405.h b/include/configs/DU405.h index bb03f235ba6..1493f750db5 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -287,8 +287,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 9146ad2a1c3..ceab6048588 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -80,8 +80,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index d722ae69122..0333925792a 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -154,9 +154,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_SIZE 64 #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h index ae9bfc5d2fe..8cce70c11b8 100644 --- a/include/configs/ELPPC.h +++ b/include/configs/ELPPC.h @@ -177,8 +177,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h index 28e396eeef5..c6a17b039ba 100644 --- a/include/configs/ELPT860.h +++ b/include/configs/ELPT860.h @@ -170,8 +170,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h index fbc3f25b466..a0acfd2697e 100644 --- a/include/configs/EP88x.h +++ b/include/configs/EP88x.h @@ -172,8 +172,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h index 4e05e8f05f7..8a0f850b7a8 100644 --- a/include/configs/ERIC.h +++ b/include/configs/ERIC.h @@ -353,8 +353,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ESTEEM192E.h b/include/configs/ESTEEM192E.h index 21d995f1b33..841bf11cfc7 100644 --- a/include/configs/ESTEEM192E.h +++ b/include/configs/ESTEEM192E.h @@ -121,8 +121,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h index a9e7fa08ebe..c4270936a6e 100644 --- a/include/configs/ETX094.h +++ b/include/configs/ETX094.h @@ -139,8 +139,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h index 94ab1c93e67..3fda551a0bd 100644 --- a/include/configs/EVB64260.h +++ b/include/configs/EVB64260.h @@ -163,8 +163,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_RAM_LOCK diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h index 286c38cd98f..f7b5bc9605a 100644 --- a/include/configs/EXBITGEN.h +++ b/include/configs/EXBITGEN.h @@ -201,8 +201,7 @@ /* Global info and initial stack */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h index dcffac2a160..57336f9fc80 100644 --- a/include/configs/FADS823.h +++ b/include/configs/FADS823.h @@ -171,8 +171,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h index e94474d2512..438d19ecf42 100644 --- a/include/configs/FADS850SAR.h +++ b/include/configs/FADS850SAR.h @@ -118,8 +118,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h index 0471f8ffd6d..339bb59e797 100644 --- a/include/configs/FLAGADM.h +++ b/include/configs/FLAGADM.h @@ -129,8 +129,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h index 06b78eea291..38d905ad458 100644 --- a/include/configs/FPS850L.h +++ b/include/configs/FPS850L.h @@ -168,8 +168,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h index 90d5b463c81..ca0b1ccd458 100644 --- a/include/configs/FPS860L.h +++ b/include/configs/FPS860L.h @@ -168,8 +168,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/G2000.h b/include/configs/G2000.h index 6723c96e3dc..af602ffeaab 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -356,8 +356,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h index 929b56e6ffe..c5ca279d7d6 100644 --- a/include/configs/GENIETV.h +++ b/include/configs/GENIETV.h @@ -162,8 +162,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 4244a0453e9..a15e686d28f 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -452,8 +452,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h index 592f4d2bf33..c684cb84788 100644 --- a/include/configs/HIDDEN_DRAGON.h +++ b/include/configs/HIDDEN_DRAGON.h @@ -127,19 +127,17 @@ #define CONFIG_SYS_RAMBOOT 1 #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #else #undef CONFIG_SYS_RAMBOOT #define CONFIG_SYS_MONITOR_LEN 0x00030000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #endif diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index cc5a9b71f06..827ecf26e44 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -325,8 +325,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h index 75e152cb0a4..27bd146e39e 100644 --- a/include/configs/IAD210.h +++ b/include/configs/IAD210.h @@ -184,8 +184,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h index 3528d5daa94..b011d50efe2 100644 --- a/include/configs/ICU862.h +++ b/include/configs/ICU862.h @@ -188,8 +188,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index d0f6952dd4b..85522504129 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -294,8 +294,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IP860.h b/include/configs/IP860.h index cbece32b349..ba8d6337500 100644 --- a/include/configs/IP860.h +++ b/include/configs/IP860.h @@ -152,8 +152,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h index e19a3df5757..0af43b667d2 100644 --- a/include/configs/IPHASE4539.h +++ b/include/configs/IPHASE4539.h @@ -247,8 +247,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index e78ff0640f6..49c65107032 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -232,8 +232,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h index 28a8ace2dd0..b82795479ac 100644 --- a/include/configs/IVML24.h +++ b/include/configs/IVML24.h @@ -154,8 +154,7 @@ # define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ #endif -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h index 16628ea9d62..9b0c32ab713 100644 --- a/include/configs/IVMS8.h +++ b/include/configs/IVMS8.h @@ -150,8 +150,7 @@ # define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ #endif -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 8584b34e25b..bc5d761f8ab 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -278,8 +278,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/JSE.h b/include/configs/JSE.h index fb35ee6dc5d..c38e0d26dcd 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -61,8 +61,7 @@ /* ... give it the whole init ram */ # define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* ... Shave a bit off the end for global data */ -# define CONFIG_SYS_GBL_DATA_SIZE 128 -# define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +# define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* ... and place the stack pointer at the top of what's left. */ # define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 82b79c93505..fcf66b7bc7a 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -81,9 +81,8 @@ #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */ diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index 1bcf581fd15..c0035e65dee 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -212,8 +212,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index b2209919c25..5084cccad81 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -228,8 +228,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index 435706289c2..0f4ea418a71 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -156,8 +156,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index d2516255d8d..a45cdc1bb96 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -148,8 +148,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index a4420eb5d53..bb3b474bd8c 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -209,8 +209,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 32) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 32) #define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 6d624dca5a0..cd12d2b7a4f 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -169,8 +169,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x21 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 9aae2c6e3e5..104fcdeb8d7 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -110,8 +110,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_ENV_IS_IN_FLASH 1 diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 64b0b69c891..f2f315940cd 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -168,8 +168,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 1dee3ef2bdd..dd8a56011f7 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -136,8 +136,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 41b1314ec25..992d738cbd4 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -188,8 +188,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index dd5ca08a8b6..b3c774f9c74 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -164,8 +164,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index f8790427b1a..56a760fc8f0 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -174,8 +174,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 1000 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 9aecd124300..0c104805d74 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -155,8 +155,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 17efb633cf1..d205e7c1749 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -169,8 +169,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x20000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 6717ef3efa7..7ae0faddac0 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -164,8 +164,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 441496b63e1..7086a1bdb71 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -164,8 +164,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 4c45517874b..37715c50c24 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -222,8 +222,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 32) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 6a7c92c7c90..86faa3df8f4 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -281,8 +281,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 32) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index ec2b075b3e4..5f6eb553ebe 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -215,8 +215,7 @@ #define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE) #define CONFIG_SYS_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM1_CTRL 0x21 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index 92fe316ad25..e178e350972 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -201,8 +201,7 @@ #define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE) #define CONFIG_SYS_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ #define CONFIG_SYS_INIT_RAM1_CTRL 0x21 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/MBX.h b/include/configs/MBX.h index 647e9dda72b..cb5b023b58f 100644 --- a/include/configs/MBX.h +++ b/include/configs/MBX.h @@ -145,8 +145,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2f00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_VPD_SIZE 256 /* size in bytes reserved for vpd buffer */ #define CONFIG_SYS_INIT_VPD_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_VPD_OFFSET-8) diff --git a/include/configs/MBX860T.h b/include/configs/MBX860T.h index 26d1b22f5a2..969ba7e245f 100644 --- a/include/configs/MBX860T.h +++ b/include/configs/MBX860T.h @@ -99,8 +99,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2f00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_VPD_SIZE 256 /* size in bytes reserved for vpd buffer */ #define CONFIG_SYS_INIT_VPD_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_VPD_OFFSET-8) diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index abc7ad2593c..9b83e21a1f7 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -143,9 +143,8 @@ #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */ diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h index a4a52699e77..b9c163856bb 100644 --- a/include/configs/MHPC.h +++ b/include/configs/MHPC.h @@ -180,8 +180,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index a8d297ee636..ce9273b6f7d 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -309,8 +309,7 @@ #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of On Chip SRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of On Chip SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* reserve some memory for POST and BOOT limit info */ #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 32) diff --git a/include/configs/ML2.h b/include/configs/ML2.h index c22824f1640..ed783876efb 100644 --- a/include/configs/ML2.h +++ b/include/configs/ML2.h @@ -212,8 +212,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index 4a407b1c7be..9529c875038 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -158,8 +158,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index c3ab8a705de..2225b46b281 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -349,8 +349,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #ifdef CONFIG_SYS_LOWBOOT diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 456f008ea49..57944733686 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -383,8 +383,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* Use this HRCW for booting from address 0xfe00000 (JP3 in setting 1-2) */ diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index b111015bfc1..3ff175c6ded 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -213,9 +213,8 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index b141fdf1260..1201133e2b0 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -210,8 +210,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 48167c401f3..6476c4c4304 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -192,8 +192,7 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 857181a4fcf..1191eea106c 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -166,8 +166,7 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index ade5b6dc0bb..affa3a9cf8d 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -153,8 +153,7 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 5ac20f21131..45b6b5f8545 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -195,8 +195,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 26e9b8290c0..de233ffe627 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -308,8 +308,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 29e1d3185ff..7b82c43dd28 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -182,8 +182,7 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index b830a0fb0cd..b0cdc02c1de 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -173,8 +173,7 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index e4826466af1..c237991adc5 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -216,8 +216,7 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index b5c05fecc65..385c7c321b0 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -239,8 +239,7 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 6f4c1bfc7b2..8410bb77ebc 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -305,9 +305,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 2d9e7885ef1..9386f648859 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -234,8 +234,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index dcb1127a157..a9689498149 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -166,8 +166,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index ffaa8d3edea..12ce6f7e66b 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -256,8 +256,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index cd5f181939c..e94822e5b83 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -206,8 +206,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 031e130b339..b221a5cc9a9 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -277,8 +277,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 13df4076935..334a4106d2d 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -254,8 +254,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index b2d7892ded1..744e4a395f8 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -231,8 +231,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 6e0ff7e164d..281918bdc9e 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -237,8 +237,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 6ef30c5a420..6a15da50c82 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -270,9 +270,8 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 9685df8df4d..f949cc2b6f4 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -270,8 +270,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index b023f817f75..17dac6c74f0 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -215,8 +215,7 @@ #endif #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 9c6f840d6f8..ab3ae5b2e38 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -273,8 +273,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h index 79bd608b221..27ebceb01f2 100644 --- a/include/configs/MUSENKI.h +++ b/include/configs/MUSENKI.h @@ -155,11 +155,9 @@ */ /* #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE */ -/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h index 88bfc8199a6..6f4d187595b 100644 --- a/include/configs/MVBC_P.h +++ b/include/configs/MVBC_P.h @@ -237,8 +237,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index c2fe620d6f4..c201310f268 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -125,8 +125,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index cd1bc80f941..3aed447e17a 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -215,8 +215,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Low Level Configuration Settings diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h index 1e4e6d97112..46151daf967 100644 --- a/include/configs/MVS1.h +++ b/include/configs/MVS1.h @@ -141,8 +141,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h index 75827358ea8..f7fd9b2eb03 100644 --- a/include/configs/MVSMR.h +++ b/include/configs/MVSMR.h @@ -206,9 +206,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index 60838925d4c..8a6b8d06b4b 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -99,7 +99,6 @@ /* Size of DRAM reserved for malloc() use */ #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE (256) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* FLASH */ diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h index fd6ab59266b..04f0f0bc53e 100644 --- a/include/configs/NETPHONE.h +++ b/include/configs/NETPHONE.h @@ -173,8 +173,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 2d38a1b46c5..795c0f61fe6 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -186,8 +186,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h index 5415b5c151a..d02dca98fdb 100644 --- a/include/configs/NETTA2.h +++ b/include/configs/NETTA2.h @@ -174,8 +174,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h index ea838ae2a92..a92e3a6261a 100644 --- a/include/configs/NETVIA.h +++ b/include/configs/NETVIA.h @@ -154,8 +154,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h index 743b6dd065d..7e3ba2a1110 100644 --- a/include/configs/NSCU.h +++ b/include/configs/NSCU.h @@ -176,8 +176,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/NX823.h b/include/configs/NX823.h index 23a30f74900..bb0d3a3022e 100644 --- a/include/configs/NX823.h +++ b/include/configs/NX823.h @@ -118,8 +118,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index 6c6828ac2b1..65a366ab041 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -298,8 +298,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h index 5ab99423606..c2e3b2bcc1e 100644 --- a/include/configs/ORSG.h +++ b/include/configs/ORSG.h @@ -294,8 +294,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/OXC.h b/include/configs/OXC.h index 0f362f1b846..bc8e718f17f 100644 --- a/include/configs/OXC.h +++ b/include/configs/OXC.h @@ -150,8 +150,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index bc5b73e4386..6c8579f9ec1 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -155,9 +155,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 7f056184625..b99f383ec1e 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -213,9 +213,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - CONFIG_SYS_GBL_DATA_SIZE) + - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon*/ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 6e26f7a15ad..0af21528d9a 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -274,8 +274,7 @@ #endif #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h index 54212f1a668..eb641f556f1 100644 --- a/include/configs/P3G4.h +++ b/include/configs/P3G4.h @@ -186,8 +186,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_RAM_LOCK diff --git a/include/configs/PATI.h b/include/configs/PATI.h index 8887f97b7b2..da2d6025066 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -133,8 +133,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */ #define CONFIG_SYS_INIT_RAM_SIZE (CONFIG_SYS_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial global data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */ +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_RAM_ADDR) - GENERATED_GBL_DATA_SIZE) /* Offset from the beginning of ram */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_IMMR + 0x03fa000) /* Physical start adress of inital stack */ /* * Start addresses for the final memory configuration diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 91c8f53c415..6be5c2570a0 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -309,8 +309,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #endif /* __CONFIG_H */ diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h index 3e7e74bcf4f..70775e75fbb 100644 --- a/include/configs/PCI5441.h +++ b/include/configs/PCI5441.h @@ -60,12 +60,11 @@ * -The stack is placed below global data (&grows down). *----------------------------------------------------------------------*/ #define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* Reserve 128k */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET /*------------------------------------------------------------------------ diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h index ea02311279a..e778c595663 100644 --- a/include/configs/PCIPPC2.h +++ b/include/configs/PCIPPC2.h @@ -140,11 +140,10 @@ /* Size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_INIT_RAM_LOCK diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h index 4cf45d3b204..48911b7be44 100644 --- a/include/configs/PCIPPC6.h +++ b/include/configs/PCIPPC6.h @@ -142,11 +142,10 @@ /* Size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_INIT_RAM_LOCK diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 04062b07c44..2dc6057f80a 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -259,8 +259,7 @@ #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of On Chip SRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of On Chip SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*********************************************************************** diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h index 8e8c0491eec..b466c4b05a2 100644 --- a/include/configs/PK1C20.h +++ b/include/configs/PK1C20.h @@ -62,12 +62,11 @@ * -The stack is placed below global data (&grows down). *----------------------------------------------------------------------*/ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 128k */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET /*------------------------------------------------------------------------ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 421f26a1b27..dcf62934045 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -370,8 +370,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/PM520.h b/include/configs/PM520.h index f039e5a9a22..8354e70fd07 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -236,8 +236,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/PM826.h b/include/configs/PM826.h index 7ac29f2a808..501f691ea52 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -294,8 +294,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 565a5d8d6a6..1af043df332 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -288,8 +288,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 6c3f7c2be5f..1e2089fb5a9 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -167,8 +167,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ diff --git a/include/configs/PM856.h b/include/configs/PM856.h index f5aa77a678c..d3e8f412e21 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -170,8 +170,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index d5794e471e4..c2db5ea5dda 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -331,9 +331,8 @@ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_OF_LIBFDT diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index 201a9c4a71f..83cee965493 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -272,9 +272,8 @@ /* End of used area in RAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes res. for initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 1568912ddaa..4eb0735fcff 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -89,8 +89,7 @@ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/PN62.h b/include/configs/PN62.h index 29ebd09efbe..7f2f1131b0a 100644 --- a/include/configs/PN62.h +++ b/include/configs/PN62.h @@ -152,12 +152,10 @@ #define CONFIG_SYS_MONITOR_LEN 0x00030000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_NO_FLASH 1 /* There is no FLASH memory */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index b2de8686c5a..a14bd0e65d3 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -533,8 +533,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/QS823.h b/include/configs/QS823.h index 0df10844913..36efbf2e0d5 100644 --- a/include/configs/QS823.h +++ b/include/configs/QS823.h @@ -273,8 +273,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/QS850.h b/include/configs/QS850.h index 338ca2e16e2..5c6ed07ba66 100644 --- a/include/configs/QS850.h +++ b/include/configs/QS850.h @@ -273,8 +273,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h index 6574986636d..b0bee82dff7 100644 --- a/include/configs/QS860T.h +++ b/include/configs/QS860T.h @@ -182,8 +182,7 @@ CONFIG_SPI */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index 000a27d4821..a8e9a4a31a5 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -196,8 +196,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 91e3b770f4f..40980fe5026 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -168,8 +168,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h index 757b7f93949..267ece16c90 100644 --- a/include/configs/RPXClassic.h +++ b/include/configs/RPXClassic.h @@ -184,8 +184,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h index 3fa5a9af567..74926d8d2a7 100644 --- a/include/configs/RPXlite.h +++ b/include/configs/RPXlite.h @@ -120,8 +120,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index ebc652d716f..7b561cbd149 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -195,8 +195,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index 3a30b4ae6b4..5c19bd36e4f 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -266,8 +266,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h index 58813d706b0..7dcc14c8208 100644 --- a/include/configs/RRvision.h +++ b/include/configs/RRvision.h @@ -197,8 +197,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index ae71e379e5c..4844fba885f 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -242,8 +242,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_SDRAM_BASE 0x00000000 diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index 081c59b5fe6..fd9bacc4994 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -195,8 +195,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/SCM.h b/include/configs/SCM.h index 55efe531906..ec26290be0e 100644 --- a/include/configs/SCM.h +++ b/include/configs/SCM.h @@ -326,8 +326,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 03482972db4..30a8e41e62a 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -105,8 +105,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ diff --git a/include/configs/SM850.h b/include/configs/SM850.h index 13d556dc530..833b18a8fdd 100644 --- a/include/configs/SM850.h +++ b/include/configs/SM850.h @@ -126,8 +126,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h index ba3ada13a5a..6d8780abb1c 100644 --- a/include/configs/SMN42.h +++ b/include/configs/SMN42.h @@ -48,7 +48,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h index a1cd6700e7c..fba5b5e2aaa 100644 --- a/include/configs/SPD823TS.h +++ b/include/configs/SPD823TS.h @@ -138,8 +138,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/SX1.h b/include/configs/SX1.h index 61492766f63..01c2b3d50ce 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -47,7 +47,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index 52e8e167e1c..774c98faec0 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -206,8 +206,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h index e2d45b1c826..f98414160db 100644 --- a/include/configs/Sandpoint8240.h +++ b/include/configs/Sandpoint8240.h @@ -155,20 +155,17 @@ #define CONFIG_SYS_RAMBOOT 1 #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #else #undef CONFIG_SYS_RAMBOOT #define CONFIG_SYS_MONITOR_LEN 0x00030000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #endif diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h index 1eaad5ab1dc..b47adcc3a9d 100644 --- a/include/configs/Sandpoint8245.h +++ b/include/configs/Sandpoint8245.h @@ -125,20 +125,17 @@ #define CONFIG_SYS_RAMBOOT 1 #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #else #undef CONFIG_SYS_RAMBOOT #define CONFIG_SYS_MONITOR_LEN 0x00030000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #endif diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index 6be20be175c..c93b12ebf1c 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -190,8 +190,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_ENV_IS_IN_FLASH 1 diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index 1bcb9d02d50..feaadf3649b 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -333,8 +333,7 @@ #endif -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h index f24b86e626e..72c652347f2 100644 --- a/include/configs/TK885D.h +++ b/include/configs/TK885D.h @@ -222,8 +222,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index ba1fcf12652..2267d59d750 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -300,8 +300,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index 090101306e8..d6ea22d7464 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -231,8 +231,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2f00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_VPD_SIZE 256 /* size in bytes reserved for vpd buffer */ #define CONFIG_SYS_INIT_VPD_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_VPD_OFFSET-8) diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 86ebaa4172c..c11fe8a3557 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -493,8 +493,7 @@ #endif -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 681185dd848..f2a2e33664b 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -183,8 +183,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 5d32b412f97..f6b856c4b97 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -178,8 +178,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index 7214c85bacd..36ecbd8b522 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -363,8 +363,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h index 1771824bb46..d1d9e8e68d3 100644 --- a/include/configs/TQM8272.h +++ b/include/configs/TQM8272.h @@ -489,8 +489,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index abaae732f7a..7c9dd79e3d2 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -153,8 +153,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB = 3 sect. for Mon */ diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index a4efe1145ef..6114bb01048 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -168,8 +168,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 0300586f8ef..3b520254a03 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -167,8 +167,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index e9c69dcc348..fd90501e36a 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -172,8 +172,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index e0481f137b3..3e3f6de2088 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -206,8 +206,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 58369767443..890d6d9d4cc 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -245,8 +245,7 @@ + 0x04010000) /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (~CONFIG_SYS_TEXT_BASE + 1)/* Reserved for Monitor */ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index da8a664792c..cdf4885b8c9 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -171,8 +171,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 13425b1dfb8..7ccc6147064 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -172,8 +172,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 3f879ec331b..0082e71e3a2 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -175,8 +175,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 1206b7aa47f..6e891e7f125 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -175,8 +175,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index c3f3e87aede..8636ff4c19e 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -218,8 +218,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index a30e82d3538..5204771e003 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -220,8 +220,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index 3bb975c7061..717b5cdd804 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -248,8 +248,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index ebc81c40034..ebe9e424c32 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -101,7 +101,6 @@ * Size of malloc() pool */ /*#define CONFIG_MALLOC_SIZE (CONFIG_ENV_SIZE + 128*1024)*/ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* BUNZIP2 needs a lot of RAM */ diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 48277485406..f0c0bd9662c 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -379,8 +379,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index f1e44077df1..fec9df0da5e 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -260,8 +260,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h index 4db83562f38..c06909fccd7 100644 --- a/include/configs/VoVPN-GW.h +++ b/include/configs/VoVPN-GW.h @@ -299,8 +299,7 @@ /* definitions for initial stack pointer and data area (in DPRAM) */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 1e71d093628..5d1c188499c 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -314,8 +314,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index 0ff84d5d946..422a781a5ca 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -317,8 +317,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index a67dab27fc7..027a904ee22 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -323,8 +323,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h index 2d52864a5d5..0e340e898e0 100644 --- a/include/configs/Yukon8220.h +++ b/include/configs/Yukon8220.h @@ -259,8 +259,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h index 1d103f2e997..265b1112fe6 100644 --- a/include/configs/ZPC1900.h +++ b/include/configs/ZPC1900.h @@ -196,8 +196,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* Hard reset configuration word */ diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h index 69e28d5cddd..5489bd831d5 100644 --- a/include/configs/ZUMA.h +++ b/include/configs/ZUMA.h @@ -181,8 +181,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_RAM_LOCK diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h index fcc556321ba..f67cf067b90 100644 --- a/include/configs/a320evb.h +++ b/include/configs/a320evb.h @@ -110,7 +110,6 @@ /*----------------------------------------------------------------------- * size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /*----------------------------------------------------------------------- * SDRAM controller configuration diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index aa0238b99e4..20c119aede1 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -253,8 +253,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 0b105693f7c..5573dc7a32f 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -86,8 +86,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/actux1.h b/include/configs/actux1.h index 91f6ff03f97..8886eff9e56 100644 --- a/include/configs/actux1.h +++ b/include/configs/actux1.h @@ -55,7 +55,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/actux2.h b/include/configs/actux2.h index b9369383593..756279e398d 100644 --- a/include/configs/actux2.h +++ b/include/configs/actux2.h @@ -46,7 +46,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/actux3.h b/include/configs/actux3.h index f5ee8991023..ad9173f3479 100644 --- a/include/configs/actux3.h +++ b/include/configs/actux3.h @@ -46,7 +46,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/actux4.h b/include/configs/actux4.h index 8d70a268ce5..04145c35c31 100644 --- a/include/configs/actux4.h +++ b/include/configs/actux4.h @@ -46,7 +46,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/aev.h b/include/configs/aev.h index 122ebabb9dc..fb958fd943a 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -277,8 +277,7 @@ #endif -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 24484fd0c87..9cd0bc645a3 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -167,7 +167,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index ee13d1bd0cd..d93e505907c 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -65,9 +65,8 @@ #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index a9045d8bade..9a9ba889077 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -61,7 +61,6 @@ */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* * DDR related diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index 80a5797493d..e7f37f59fde 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -112,7 +112,6 @@ /* Size of DRAM reserved for malloc() use */ #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE (256) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* FLASH */ diff --git a/include/configs/apollon.h b/include/configs/apollon.h index c1295de36d2..aa7446233c0 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -79,7 +79,6 @@ #define CONFIG_ENV_SIZE_FLEX SZ_256K #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_1M) /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Hardware drivers diff --git a/include/configs/aria.h b/include/configs/aria.h index 37592fc66c4..b3ca8d23f8c 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -302,9 +302,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h index 49ea3a16685..d0d0998d6ef 100644 --- a/include/configs/armadillo.h +++ b/include/configs/armadillo.h @@ -51,7 +51,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/assabet.h b/include/configs/assabet.h index 58cdbd59043..5cd1836434f 100644 --- a/include/configs/assabet.h +++ b/include/configs/assabet.h @@ -48,7 +48,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size rsrvd for initial data */ /* * Hardware drivers diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index dae31b17c8c..d468e498fa4 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -302,9 +302,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 #define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index 44c287033ff..cde5aede904 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -209,7 +209,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32*1024) /* regular stack */ diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index d39e8f28a96..fb9d0a516d4 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -76,7 +76,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index b386057c0ef..14559f5ccca 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -205,10 +205,9 @@ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + SZ_128K, \ SZ_4K) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \ - - CONFIG_SYS_GBL_DATA_SIZE) + - GENERATED_GBL_DATA_SIZE) #define CONFIG_STACKSIZE SZ_32K /* regular stack */ #define CONFIG_STACKSIZE_IRQ SZ_4K /* Unsure if to big or to small*/ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index b89242b3a17..02401b8366b 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -213,7 +213,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32*1024) /* regular stack */ diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index df8181b755b..05e12dd08c1 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -231,7 +231,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32*1024) /* regular stack */ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 5cafa1ef4ac..0905638f8b0 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -341,7 +341,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32*1024) /* regular stack */ diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 44c5496b631..67288d0e485 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -217,7 +217,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32*1024) /* regular stack */ diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index e8fcd66c940..22054cf4882 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -176,7 +176,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32*1024) /* regular stack */ diff --git a/include/configs/atc.h b/include/configs/atc.h index 472e73c7ec6..53da0f7e2c6 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -245,8 +245,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h index ae60f2eb3c1..63e6d6e5834 100644 --- a/include/configs/balloon3.h +++ b/include/configs/balloon3.h @@ -33,7 +33,6 @@ */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_ARCH_CPU_INIT #define CONFIG_BOOTCOMMAND \ "fpga load 0x0 0x50000 0x62638; " \ @@ -133,7 +132,7 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_SP_ADDR \ - (PHYS_SDRAM_1 + CONFIG_SYS_GBL_DATA_SIZE + 2048) + (PHYS_SDRAM_1 + GENERATED_GBL_DATA_SIZE + 2048) /* * NOR FLASH diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index b985dc11bf2..7b66fc092a7 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -81,8 +81,7 @@ #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/barco.h b/include/configs/barco.h index 6ff5c55c82b..dcba0cbcc78 100644 --- a/include/configs/barco.h +++ b/include/configs/barco.h @@ -152,19 +152,17 @@ #define CONFIG_SYS_RAMBOOT 1 #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #else #undef CONFIG_SYS_RAMBOOT #define CONFIG_SYS_MONITOR_LEN 0x00030000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #endif diff --git a/include/configs/bluestone.h b/include/configs/bluestone.h index c689763218f..3e691fdcf41 100644 --- a/include/configs/bluestone.h +++ b/include/configs/bluestone.h @@ -67,9 +67,8 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index 7171032291a..da67ae3b5a2 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -240,8 +240,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h index 8852f748821..f325d2b4393 100644 --- a/include/configs/c2mon.h +++ b/include/configs/c2mon.h @@ -144,8 +144,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h index 2ab5579ac3e..63f003db23f 100644 --- a/include/configs/ca9x4_ct_vxp.h +++ b/include/configs/ca9x4_ct_vxp.h @@ -45,7 +45,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define SCTL_BASE 0x10001000 #define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0) @@ -119,7 +118,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET /* Basic environment settings */ diff --git a/include/configs/canmb.h b/include/configs/canmb.h index 7666ee7d228..d4c5bbd5c9f 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -160,8 +160,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index fc039f8f267..8c03582c8dd 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -125,8 +125,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h index a0726a9efe8..9696487907d 100644 --- a/include/configs/cerf250.h +++ b/include/configs/cerf250.h @@ -49,7 +49,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -157,7 +156,7 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) /* * GPIO settings diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h index 7ea1a46033b..6e4a3b45156 100644 --- a/include/configs/cm4008.h +++ b/include/configs/cm4008.h @@ -43,7 +43,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h index ea374da86e8..dca7d54c6b5 100644 --- a/include/configs/cm41xx.h +++ b/include/configs/cm41xx.h @@ -43,7 +43,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 488c0f2c47f..0abe090c14a 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -167,8 +167,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_BOARD_TYPES 1 /* we use board_type */ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index ffe83f091c0..ff4f306fffa 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -76,7 +76,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h index e03bf31d3d1..198f3423e8d 100644 --- a/include/configs/cmi_mpc5xx.h +++ b/include/configs/cmi_mpc5xx.h @@ -130,8 +130,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */ #define CONFIG_SYS_INIT_RAM_SIZE (CONFIG_SYS_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* Size in bytes reserved for initial global data */ -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */ +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_RAM_ADDR) - GENERATED_GBL_DATA_SIZE) /* Offset from the beginning of ram */ #define CONFIG_SYS_INIT_SP_ADDR 0x013fa000 /* Physical start adress of inital stack */ /* diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 0b36eb5acbc..5348ad126b5 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -277,8 +277,7 @@ from which user programs will be started */ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h index b10e2173077..d77af0defdf 100644 --- a/include/configs/cogent_mpc8260.h +++ b/include/configs/cogent_mpc8260.h @@ -225,8 +225,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h index 4d4a81c64e6..3ee4a40a3ea 100644 --- a/include/configs/cogent_mpc8xx.h +++ b/include/configs/cogent_mpc8xx.h @@ -172,8 +172,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index afc15378bfd..a5231894db2 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -38,7 +38,6 @@ */ #define CONFIG_ENV_SIZE 0x4000 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_TEXT_BASE 0x0 #define CONFIG_ENV_OVERWRITE /* override default environment */ @@ -170,7 +169,7 @@ #define CONFIG_SYS_LOAD_ADDR (0xa1000000) #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) /* * NOR FLASH diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 065e89f8e4d..2ac59e54b61 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -213,8 +213,7 @@ #endif #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index 78df31fa75b..c1742c1a693 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -237,8 +237,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index fb6f79a4230..d2394235f19 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -445,7 +445,6 @@ */ #define CONFIG_SYS_MALLOC_LEN \ ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_STACKSIZE (32 * 1024) diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index 9ef4523de42..5f40908b498 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -200,7 +200,6 @@ #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_STACKSIZE (32 * 1024) #if defined(CONFIG_USE_IRQ) diff --git a/include/configs/cradle.h b/include/configs/cradle.h index 3da35623c08..c21af3817f4 100644 --- a/include/configs/cradle.h +++ b/include/configs/cradle.h @@ -44,7 +44,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -140,7 +139,7 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) /* * FLASH and environment organization diff --git a/include/configs/csb226.h b/include/configs/csb226.h index 72e47ce7a84..505740c4d41 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -117,7 +117,6 @@ * */ #define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ @@ -182,7 +181,7 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) # if 0 /* FIXME: switch to _documented_ registers */ diff --git a/include/configs/csb272.h b/include/configs/csb272.h index 071e9679809..0ea34b89d85 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -294,8 +294,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* byte size reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 8f5b3d458fb..23731676f25 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -293,8 +293,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* byte size reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/csb637.h b/include/configs/csb637.h index efa27809920..f92f3c74432 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -76,7 +76,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 160ece2bf9c..d8f1e9fd61c 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -47,7 +47,6 @@ * Memory Info */ #define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 /* memtest start addr */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 7bf6336b131..11f2869613d 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -45,7 +45,6 @@ * Memory Info */ #define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ @@ -192,5 +191,5 @@ /* additions for new relocation code, must added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0xc0000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index 37011c0935c..d4c3697e884 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -151,7 +151,6 @@ /* U-Boot memory configuration */ #define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ #define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index e09fb751894..4b1f02998c5 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -134,7 +134,6 @@ /* U-Boot memory configuration */ #define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ #define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index 2c3d88dc174..04b60449ede 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -183,7 +183,6 @@ /* U-Boot memory configuration */ #define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ #define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index ddc5990cef5..6b5d8656b68 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -41,7 +41,6 @@ /* Memory Info */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* initial data */ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index aab2afa962b..ec05abac49e 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -72,7 +72,6 @@ /* Memory Info */ /*=============*/ #define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 04cdc210e62..409c5a464e1 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -39,7 +39,6 @@ /* Memory Info */ /*=============*/ #define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index f4e17f8cc22..c7e0e56d7ff 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -42,7 +42,6 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 /* Memory Info */ #define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 1746495e9a7..3035f794d9f 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -72,7 +72,6 @@ /* Memory Info */ /*=============*/ #define CONFIG_SYS_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/debris.h b/include/configs/debris.h index 978b1430c6a..7ad36a1ce88 100644 --- a/include/configs/debris.h +++ b/include/configs/debris.h @@ -200,20 +200,17 @@ #define CONFIG_SYS_RAMBOOT 1 #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #else #undef CONFIG_SYS_RAMBOOT #define CONFIG_SYS_MONITOR_LEN 0x00040000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #endif diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 281577153fc..fb81c64715d 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -63,7 +63,6 @@ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* Hardware drivers */ diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index 0ede4ec0aa5..d541160bd39 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -310,9 +310,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#define CONFIG_SYS_GBL_DATA_SIZE 4096 #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index c9bd26118ba..c490ff67da4 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -193,9 +193,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size/bytes res'd for init data*/ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index e48e20f6853..5c05e4df3c6 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -49,7 +49,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index 11cfe706981..61f34ddc446 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -122,8 +122,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 8d8af93792f..754fc8bf8b6 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -91,7 +91,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 520*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * sdram diff --git a/include/configs/ebony.h b/include/configs/ebony.h index 46988c13cb4..d6b655122a5 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -74,9 +74,8 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index ff25ee27546..19b76321e65 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -218,7 +218,6 @@ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) /* Run-time memory allocatons */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_STACKSIZE (128 * 1024) #if defined(CONFIG_USE_IRQ) diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 43e5e870f00..a75f06aa595 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -205,7 +205,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */ /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Other required minimal configurations @@ -226,6 +225,6 @@ /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0 #define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) #endif /* _CONFIG_EDMINIV2_H */ diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h index e151faa9655..fdb98b5cbcc 100644 --- a/include/configs/ep7312.h +++ b/include/configs/ep7312.h @@ -42,7 +42,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h index a21dbf7128f..bb87d3623cd 100644 --- a/include/configs/ep8248.h +++ b/include/configs/ep8248.h @@ -219,8 +219,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* Hard reset configuration word */ diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index 277bd8d754e..b15659d918d 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -430,8 +430,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h index 114af7ae5b4..692f0ec77a6 100644 --- a/include/configs/ep82xxm.h +++ b/include/configs/ep82xxm.h @@ -347,8 +347,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/espt.h b/include/configs/espt.h index 2ec907c1f13..26389ed0253 100644 --- a/include/configs/espt.h +++ b/include/configs/espt.h @@ -85,7 +85,6 @@ /* Size of DRAM reserved for malloc() use */ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE (256) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) #define CONFIG_SYS_FLASH_CFI diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h index 0f415d9c8b9..fb05727cde1 100644 --- a/include/configs/evb4510.h +++ b/include/configs/evb4510.h @@ -53,7 +53,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Hardware drivers diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h index cb521a125fe..9535eb9edec 100644 --- a/include/configs/galaxy5200.h +++ b/include/configs/galaxy5200.h @@ -210,10 +210,9 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index 41294b9be62..82e70f7b199 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -60,7 +60,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size rsrvd for initial data */ /* diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h index 32e3cd65852..3c59ff4922c 100644 --- a/include/configs/gdppc440etx.h +++ b/include/configs/gdppc440etx.h @@ -73,9 +73,8 @@ #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram*/ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes init data*/ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - CONFIG_SYS_GBL_DATA_SIZE) + - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h index bb4ea7921d0..dc62ea30c26 100644 --- a/include/configs/gr_cpci_ax2000.h +++ b/include/configs/gr_cpci_ax2000.h @@ -261,10 +261,9 @@ #define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END #endif -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_PROM_SIZE (8192-CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_PROM_SIZE (8192-GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32) diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h index 35c4a083530..5efe676bce2 100644 --- a/include/configs/gr_ep2s60.h +++ b/include/configs/gr_ep2s60.h @@ -229,10 +229,9 @@ #define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE #define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_END - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_PROM_SIZE (8192-CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_PROM_SIZE (8192-GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32) diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h index 92fbbbb5582..505db10a0f7 100644 --- a/include/configs/gr_xc3s_1500.h +++ b/include/configs/gr_xc3s_1500.h @@ -206,10 +206,9 @@ #define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE #define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_PROM_SIZE (8192-CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_PROM_SIZE (8192-GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32) diff --git a/include/configs/grsim.h b/include/configs/grsim.h index 5dfdf5156ff..bbd2f91abd3 100644 --- a/include/configs/grsim.h +++ b/include/configs/grsim.h @@ -231,10 +231,9 @@ #define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE #define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_PROM_SIZE (8192-CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_PROM_SIZE (8192-GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32) diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h index 39af8feb43f..294d6c4f870 100644 --- a/include/configs/grsim_leon2.h +++ b/include/configs/grsim_leon2.h @@ -229,10 +229,9 @@ #define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE #define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_PROM_SIZE (8192-CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_PROM_SIZE (8192-GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32) diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 13bb822ae6e..35e6944d548 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -439,8 +439,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h index d4168ebfc39..c56efde7e0b 100644 --- a/include/configs/hcu4.h +++ b/include/configs/hcu4.h @@ -72,8 +72,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* OCM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index 7ff51a734e9..0c8fdf504cc 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -83,8 +83,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/hermes.h b/include/configs/hermes.h index 089f1da9a0b..d849b5cc81a 100644 --- a/include/configs/hermes.h +++ b/include/configs/hermes.h @@ -123,8 +123,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index aebb5e58ea1..354072a8e67 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -201,8 +201,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 5a4488b0562..7c4c2ba4ea9 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -378,8 +378,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/icon.h b/include/configs/icon.h index 4742429964e..2fac0efe130 100644 --- a/include/configs/icon.h +++ b/include/configs/icon.h @@ -98,10 +98,9 @@ #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Init RAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* size of used area */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* sizeof init data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /* diff --git a/include/configs/idmr.h b/include/configs/idmr.h index 259d0700363..fc046d60556 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -181,8 +181,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/igep0020.h b/include/configs/igep0020.h index 34e8a57b963..16d92793afb 100644 --- a/include/configs/igep0020.h +++ b/include/configs/igep0020.h @@ -210,7 +210,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes for initial data */ /* * SMSC911x Ethernet @@ -223,6 +222,6 @@ #endif /* (CONFIG_CMD_NET) */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE) #endif /* __CONFIG_H */ diff --git a/include/configs/igep0030.h b/include/configs/igep0030.h index 5e2e0ed7bf6..d6fbec7b1f1 100644 --- a/include/configs/igep0030.h +++ b/include/configs/igep0030.h @@ -207,9 +207,8 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes for initial data */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE) #endif /* __CONFIG_H */ diff --git a/include/configs/impa7.h b/include/configs/impa7.h index fdfa022c0b0..3328e639a9c 100644 --- a/include/configs/impa7.h +++ b/include/configs/impa7.h @@ -42,7 +42,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 88e8d3db104..b8dc5aac5da 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -89,7 +89,6 @@ /* malloc() len */ #define CONFIG_SYS_MALLOC_LEN (0x10000 + 512 * 1024) /* reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* memtest start address */ #define CONFIG_SYS_MEMTEST_START 0xA0000000 #define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */ @@ -238,5 +237,5 @@ /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #endif /* __IMX27LITE_COMMON_CONFIG_H */ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 09dc876c396..db4ec3d808d 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -54,7 +54,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -151,7 +150,7 @@ #define CONFIG_SYS_SDRAM_BASE CSD0_BASE #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) /*----------------------------------------------------------------------- diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 62944a93f6e..4d11f97d6f5 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -52,7 +52,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index e381d0d49d9..9b116e690ec 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -216,8 +216,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE #endif -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/innokom.h b/include/configs/innokom.h index 01522cdebd9..d8fcbdb4219 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -110,7 +110,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ @@ -195,7 +194,7 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) /* * JFFS2 partitions diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index e0e82583410..32ff1932c6e 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -53,7 +53,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * PL010 Configuration diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index caafc93116c..2c8ca2ddc59 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -48,7 +48,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/intip.h b/include/configs/intip.h index 4e490eed4bd..3ff4a86ab96 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -107,9 +107,8 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index e7edf61eca4..d3821389fd5 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -267,10 +267,9 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h index 768e8366bda..28d41e29254 100644 --- a/include/configs/ixdp425.h +++ b/include/configs/ixdp425.h @@ -46,7 +46,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h index 0c092347ca7..637fd7d4f89 100644 --- a/include/configs/ixdpg425.h +++ b/include/configs/ixdpg425.h @@ -68,7 +68,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (256 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h index a5d8764b519..c1193926bde 100644 --- a/include/configs/jadecpu.h +++ b/include/configs/jadecpu.h @@ -197,7 +197,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (0x400000 - 0x8000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32*1024) /* regular stack */ diff --git a/include/configs/jornada.h b/include/configs/jornada.h index 69a045cc324..4cbbf242bb6 100644 --- a/include/configs/jornada.h +++ b/include/configs/jornada.h @@ -46,7 +46,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size for initial data */ /* * select serial console configuration diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 70d67e7d234..8d27c0b2d10 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -228,8 +228,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/katmai.h b/include/configs/katmai.h index df92576b95e..3ed8dc7f3ea 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -97,9 +97,8 @@ #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h index 41ec1d52e39..a2edaf99836 100644 --- a/include/configs/kb9202.h +++ b/include/configs/kb9202.h @@ -65,7 +65,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (roundup(CONFIG_ENV_SIZE,4096) + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 6dff2601782..031f8fb4ec9 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -93,8 +93,7 @@ #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) /* 4 KiB */ -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * If the data cache is being used for the primordial stack and global diff --git a/include/configs/km8xx.h b/include/configs/km8xx.h index 5c2a7ad144a..7683fe542e5 100644 --- a/include/configs/km8xx.h +++ b/include/configs/km8xx.h @@ -108,8 +108,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h index faa0f503266..986c46ec642 100644 --- a/include/configs/km_arm.h +++ b/include/configs/km_arm.h @@ -108,7 +108,6 @@ #define CONFIG_KM_CONSOLE_TTY "ttyS0" /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Other required minimal configurations @@ -183,5 +182,5 @@ int get_scl (void); /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_INIT_SP_ADDR (0x00000000 + 0x1000 - /* Fix this */ \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #endif /* _CONFIG_KM_ARM_H */ diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 81536a09e30..8fcadfee506 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -180,8 +180,7 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/korat.h b/include/configs/korat.h index 55485c209bd..66cb53337d6 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -89,8 +89,7 @@ #undef CONFIG_SYS_INIT_RAM_DCACHE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /* diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h index c5972043092..95fc2437dd5 100644 --- a/include/configs/kvme080.h +++ b/include/configs/kvme080.h @@ -118,8 +118,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_FLASH_BASE 0x7C000000 diff --git a/include/configs/lart.h b/include/configs/lart.h index 2d3b369aae6..795cf3487b3 100644 --- a/include/configs/lart.h +++ b/include/configs/lart.h @@ -42,7 +42,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index 7a2a8c33e14..b00647b3e01 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -276,8 +276,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #endif #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /*---------------------------------------------------------------------- * Serial configuration diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h index 65276a27c0b..a0fe32ec2cf 100644 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -48,7 +48,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h index bf4a57d249b..06f3d7e58ff 100644 --- a/include/configs/lpd7a400.h +++ b/include/configs/lpd7a400.h @@ -38,7 +38,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * select serial console configuration diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h index 557f389ccbf..7535f62d3df 100644 --- a/include/configs/lpd7a404.h +++ b/include/configs/lpd7a404.h @@ -38,7 +38,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * select serial console configuration diff --git a/include/configs/luan.h b/include/configs/luan.h index 60ebafb853f..3b4761bd087 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -81,8 +81,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_SIZE (8 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 62f9691983e..b7d53b65b78 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -53,7 +53,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -177,7 +176,7 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) #define FPGA_REGS_BASE_PHYSICAL 0x08000000 diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index cf9a2ca01ca..e23b0a1b2f2 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -276,8 +276,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 68 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 0f637c752a6..4c9744ca4fa 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -88,9 +88,8 @@ #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data*/ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* unused GPT0 COMP reg */ #define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6) diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h index 26c2bcb6893..68f0415a37b 100644 --- a/include/configs/m501sk.h +++ b/include/configs/m501sk.h @@ -77,7 +77,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Bytes reserved for initial data */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/makalu.h b/include/configs/makalu.h index ae07dc72a42..fcc789d7141 100644 --- a/include/configs/makalu.h +++ b/include/configs/makalu.h @@ -89,8 +89,7 @@ #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) /* 4 KiB */ -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * If the data cache is being used for the primordial stack and global diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h index 62398a8a7f1..3e4131eae17 100644 --- a/include/configs/manroland/mpc5200-common.h +++ b/include/configs/manroland/mpc5200-common.h @@ -113,9 +113,8 @@ #define CONFIG_SYS_MBAR 0xF0000000 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE -\ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_SDRAM_BASE 0x00000000 diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index e127504dd04..f1cdc4019eb 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -262,8 +262,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/mcu25.h b/include/configs/mcu25.h index 336871d4ac6..a1622916a03 100644 --- a/include/configs/mcu25.h +++ b/include/configs/mcu25.h @@ -72,8 +72,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* OCM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index 501e78cc1de..b9cf1dc7975 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -208,8 +208,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Init RAM addr */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */ diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index d577f1d146b..9961f122b11 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -218,8 +218,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/meesc.h b/include/configs/meesc.h index dbb25314399..41a953e9052 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -182,7 +182,6 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index bdc98a6b151..6dec0ee7403 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -179,8 +179,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* Hard reset configuration word */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index bcdd86e9f3b..75e4e076178 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -135,15 +135,14 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) /* global pointer */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size of global data */ /* start of global data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE \ - - CONFIG_SYS_GBL_DATA_SIZE) + - GENERATED_GBL_DATA_SIZE) /* monitor code */ #define SIZE 0x40000 -#define CONFIG_SYS_MONITOR_LEN (SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_MONITOR_LEN (SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MONITOR_BASE \ (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_MONITOR_END \ diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h index 74bab5fc4c1..57707f38e67 100644 --- a/include/configs/modnet50.h +++ b/include/configs/modnet50.h @@ -46,7 +46,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Hardware drivers diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 6c13e3f4e35..bdcae59e0df 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -202,8 +202,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 3138b493cd8..956603a2da2 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -81,7 +81,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/mpc5121-common.h b/include/configs/mpc5121-common.h index 399e43f09e4..a5e77c5a791 100644 --- a/include/configs/mpc5121-common.h +++ b/include/configs/mpc5121-common.h @@ -27,9 +27,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Init RAM base */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE /* Size of area */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes of initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index cbfcb7099b0..f966325a8e2 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -272,8 +272,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */ diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 1ab58ad3fa1..927446438ce 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -223,8 +223,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x07d00000 /* unused memory region */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000/* larger space - we have SDRAM initialized */ -#define CONFIG_SYS_GBL_DATA_SIZE 128/* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /*----------------------------------------------------------------------- * Start addresses for the final memory configuration diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 1d0e1f2e806..d7a3a9690fe 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -221,9 +221,8 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Local Bus Configuration & Clock Setup diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h index 0a472a65817..311f524024d 100644 --- a/include/configs/mpr2.h +++ b/include/configs/mpr2.h @@ -57,7 +57,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN (128 * 1024) #define CONFIG_SYS_MALLOC_LEN (256 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* Memory */ #define CONFIG_SYS_SDRAM_BASE 0x8C000000 diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h index 0ea3527e30b..5304237a741 100644 --- a/include/configs/ms7720se.h +++ b/include/configs/ms7720se.h @@ -76,7 +76,6 @@ #define CONFIG_SYS_MONITOR_BASE MS7720SE_FLASH_BASE_1 #define CONFIG_SYS_MONITOR_LEN (128 * 1024) #define CONFIG_SYS_MALLOC_LEN (256 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 256 #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index 02514285cc2..1ddadf696d9 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -89,7 +89,6 @@ in Flash (NOT run time address in SDRAM) ?!? */ #define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* */ #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_GBL_DATA_SIZE (256) /* size in bytes reserved for initial data */ #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* FLASH */ diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index 02090f23157..9b43acb2076 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -81,7 +81,6 @@ #define CONFIG_SYS_MONITOR_LEN (128 * 1024) #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_GBL_DATA_SIZE (256) /* size in bytes reserved for initial data */ #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) #define CONFIG_SYS_RX_ETH_BUFFER (8) diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h index e35f923f450..8b3022b2c09 100644 --- a/include/configs/muas3001.h +++ b/include/configs/muas3001.h @@ -261,8 +261,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* Hard reset configuration word */ diff --git a/include/configs/munices.h b/include/configs/munices.h index db3cc35d5eb..425a1d83d7e 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -118,8 +118,7 @@ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index bdcebd3b5de..bc81f2daa61 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -131,7 +131,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* 1MiB for malloc() */ /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Other required minimal configurations diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index b2ffd3e9354..21b7ec7e1b2 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -61,7 +61,6 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * CS8900 Ethernet drivers diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h index 90a8d8405b5..0641befeb17 100644 --- a/include/configs/mx1fs2.h +++ b/include/configs/mx1fs2.h @@ -99,7 +99,6 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_STACKSIZE (120<<10) /* stack size */ diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 57955dfc3b0..d2798e974bf 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -51,7 +51,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 4b4fb1a06a3..47e7c866c03 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -55,7 +55,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (2*CONFIG_ENV_SIZE + 2 * 128 * 1024) /* Bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Hardware drivers diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 61654732706..f31fc4e6c02 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -52,7 +52,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define BOARD_LATE_INIT diff --git a/include/configs/neo.h b/include/configs/neo.h index 5ee6c7f5e96..8de5aaf1ed6 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -210,8 +210,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/netstar.h b/include/configs/netstar.h index c63c84650f0..ee5a995e5e2 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -72,7 +72,6 @@ /* * Size of malloc() pool */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) /* diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index 2b640dca980..49a16ab2066 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -90,7 +90,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00000000 #define CONFIG_SYS_MEMTEST_END 0x0FFFFFFF #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ #define BOARD_LATE_INIT /* call board_late_init during start up */ diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h index e4bf57b7555..53f2084d9f7 100644 --- a/include/configs/nios2-generic.h +++ b/include/configs/nios2-generic.h @@ -123,12 +123,11 @@ #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \ CONFIG_SYS_SDRAM_SIZE - \ CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* Global data size rsvd */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x20000) #define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - \ CONFIG_SYS_MALLOC_LEN) #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h index 79dcd647c2d..e6b774f2c31 100644 --- a/include/configs/ns9750dev.h +++ b/include/configs/ns9750dev.h @@ -50,7 +50,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial * data */ /* diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h index b5878b4203d..9f5a0b89b7c 100644 --- a/include/configs/o2dnt.h +++ b/include/configs/o2dnt.h @@ -217,8 +217,7 @@ #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index fe6f579492c..d0fe9dadfbe 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -73,9 +73,8 @@ #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index b0ebafd7bd0..9ff4f843ccd 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -50,7 +50,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h index 0bbb5b35c15..2936dcc56f6 100644 --- a/include/configs/omap1610h2.h +++ b/include/configs/omap1610h2.h @@ -52,7 +52,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h index 832dd426b6e..0b41c46648d 100644 --- a/include/configs/omap1610inn.h +++ b/include/configs/omap1610inn.h @@ -51,7 +51,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 47437b09c64..7161ab18ca3 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -72,7 +72,6 @@ */ #define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 900dbd3f7a0..1c9a0075b82 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -75,7 +75,6 @@ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* @@ -348,6 +347,6 @@ extern unsigned int boot_flash_type; /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE) #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index c4aa220f789..e925f3bd2d6 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -71,7 +71,6 @@ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* * Hardware drivers diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 69f912679ea..02920787458 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -58,7 +58,6 @@ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* @@ -325,6 +324,6 @@ extern unsigned int boot_flash_type; #endif /* (CONFIG_CMD_NET) */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE) #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 3308aceb492..b78aacfa088 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -61,7 +61,6 @@ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index 5439aa3dd9c..fab263d6cbd 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -78,7 +78,6 @@ */ #define CONFIG_ENV_SIZE (256 << 10) #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /*--------------------------------------------------------------------------*/ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index f612e0fd19f..10b248ad865 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -67,7 +67,6 @@ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index aaf929e08e2..b7c301f8ed7 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -68,7 +68,6 @@ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ /* Sector */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* * Hardware drivers diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index b52ca19ae9a..74defabbf89 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -67,7 +67,6 @@ */ #define CONFIG_ENV_SIZE (256 << 10) #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* Vector Base */ #define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE @@ -228,6 +227,6 @@ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE) #endif /* __CONFIG_H */ diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h index 174d73f0668..26c380d3e7e 100644 --- a/include/configs/omap4_sdp4430.h +++ b/include/configs/omap4_sdp4430.h @@ -68,7 +68,6 @@ */ #define CONFIG_ENV_SIZE (128 << 10) #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ /* initial data */ /* Vector Base */ #define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE @@ -233,6 +232,6 @@ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE) #endif /* __CONFIG_H */ diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index bc660e39e82..b875464b0bd 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -54,7 +54,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h index a6a8a023f1b..fa3681e6dc6 100644 --- a/include/configs/omap730p2.h +++ b/include/configs/omap730p2.h @@ -59,7 +59,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/otc570.h b/include/configs/otc570.h index 4a1cedec0fe..af0202cfbe5 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -235,7 +235,6 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ 128*1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 97703d6b720..71eb78495f2 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -99,8 +99,7 @@ #undef CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0x42000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /*----------------------------------------------------------------------- diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 20a07558182..719a12aaa0c 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -62,9 +62,8 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon*/ diff --git a/include/configs/palmld.h b/include/configs/palmld.h index a2310a97bab..65f1306f5cf 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -33,7 +33,6 @@ */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_TEXT_BASE 0x0 #define CONFIG_BOOTCOMMAND \ @@ -156,7 +155,7 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) /* * NOR FLASH diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index 40ab0bf2c09..3f6c2f11086 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -35,7 +35,6 @@ */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_TEXT_BASE 0x0 #define CONFIG_BOOTCOMMAND \ @@ -157,7 +156,7 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) /* * NOR FLASH diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h index 1249b0d9ae8..676f40c51a1 100644 --- a/include/configs/pcm030.h +++ b/include/configs/pcm030.h @@ -225,10 +225,9 @@ RTC configuration #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used */ /* area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes */ /* reserved for initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index bf89ddc0af3..deb5b332f1f 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -75,8 +75,7 @@ #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 220f68658bc..33fa6ee8bd2 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -64,7 +64,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index 3f66a980d04..5830345921e 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -223,8 +223,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index b366f381b11..64654f825e3 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -50,7 +50,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -175,7 +174,7 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) /* * GPIO settings diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index a0b00e9706a..aee842fbb7f 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -370,7 +370,6 @@ */ #define CONFIG_SYS_MALLOC_LEN \ ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 9735e6a0797..42ec855cc9d 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -401,7 +401,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 690f119f4cd..2fbe5c66a9f 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -175,7 +175,6 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\ 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32*1024) /* regular stack */ diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index 831097eb194..652b85efd59 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -298,14 +298,13 @@ * * CONFIG_SYS_INIT_RAM_ADDR - Address of Init RAM, above exception vect * CONFIG_SYS_INIT_RAM_SIZE - Size of Init RAM - * CONFIG_SYS_GBL_DATA_SIZE - Ammount of RAM to reserve for global data + * GENERATED_GBL_DATA_SIZE - Ammount of RAM to reserve for global data * CONFIG_SYS_GBL_DATA_OFFSET - Start of global data, top of stack */ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000) #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index d37d588ab2e..68c62770f23 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -423,8 +423,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index b4327c621c9..1ff35e39821 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -76,7 +76,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * PXA250 IDP memory map information @@ -294,7 +293,7 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) /* * GPIO settings diff --git a/include/configs/qong.h b/include/configs/qong.h index 900c2792817..e2f7a5e9f9f 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -43,7 +43,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Hardware drivers @@ -301,7 +300,7 @@ extern int qong_nand_rdy(void *chip); #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) #define CONFIG_BOARD_EARLY_INIT_F 1 diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index e3929bb043b..5fd7838d52a 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -249,8 +249,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of OCM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/quantum.h b/include/configs/quantum.h index 54a8886ba36..0ebb0940826 100644 --- a/include/configs/quantum.h +++ b/include/configs/quantum.h @@ -159,8 +159,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index bc518db7e2f..ade6f7c7086 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -58,7 +58,6 @@ /* Size of DRAM reserved for malloc() use */ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE (256) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index 41376da2003..3416cb897e1 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -101,7 +101,6 @@ #define CONFIG_SYS_MALLOC_LEN (1204 * 1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE (256) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) #define CONFIG_SYS_RX_ETH_BUFFER (8) diff --git a/include/configs/redwood.h b/include/configs/redwood.h index 53f817cef2e..f75ab678182 100644 --- a/include/configs/redwood.h +++ b/include/configs/redwood.h @@ -90,9 +90,8 @@ #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/rmu.h b/include/configs/rmu.h index 8e6a0a34475..064716f904f 100644 --- a/include/configs/rmu.h +++ b/include/configs/rmu.h @@ -155,8 +155,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index 9e705de695f..5761f20a19e 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -254,8 +254,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h index 9aa71b4496a..b3feaa8c332 100644 --- a/include/configs/rsk7203.h +++ b/include/configs/rsk7203.h @@ -78,7 +78,6 @@ #define CONFIG_SYS_MONITOR_BASE RSK7203_FLASH_BASE_1 #define CONFIG_SYS_MONITOR_LEN (128 * 1024) #define CONFIG_SYS_MALLOC_LEN (256 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 256 #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* FLASH */ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index dc01ceb7b26..47b8a559957 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -58,7 +58,6 @@ * 1MB = 0x100000, 0x100000 = 1024 * 1024 */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for */ /* initial data */ /* * select serial console configuration diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 118e80d3aa6..32e0444a2fb 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -674,8 +674,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h index 025ad0953c2..f0f19b2712c 100644 --- a/include/configs/sbc2410x.h +++ b/include/configs/sbc2410x.h @@ -59,7 +59,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index b9f27cc95b7..cdbe7106e49 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -187,7 +187,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ #ifdef CONFIG_USE_IRQ diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index a308085dabb..6f0d728f906 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -265,8 +265,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h index f6a32d77c76..5993be6006a 100644 --- a/include/configs/sbc8240.h +++ b/include/configs/sbc8240.h @@ -201,11 +201,10 @@ typedef unsigned int led_id_t; /* Size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * NS16550 Configuration diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h index 48a1c560f20..0d83337254a 100644 --- a/include/configs/sbc8260.h +++ b/include/configs/sbc8260.h @@ -573,8 +573,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index e07513a0bb9..b418cf23baf 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -171,8 +171,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index ff0a7dbce7b..7bf9fc76c21 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -325,8 +325,7 @@ #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 45269448cc2..101c5d943d3 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -193,8 +193,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index dfeb7981f5d..90d84eba8ae 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -251,8 +251,7 @@ #endif #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 2a166bc416a..04511057efd 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -481,8 +481,7 @@ */ /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* Initial value of the stack pointern in internal SRAM */ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index 555671464bb..c0ae2d9d240 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -107,7 +107,6 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_STACKSIZE (120<<10) /* stack size */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index b8581dec5e2..a406ca032ce 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -99,8 +99,7 @@ /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /* diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index c8c62ad76e3..209cb88f3f3 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -85,7 +85,6 @@ /* Size of DRAM reserved for malloc() use */ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE (256) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) #define CONFIG_SYS_FLASH_CFI diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index 6627f99ce30..591fb5cd158 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -110,7 +110,6 @@ #define CONFIG_SYS_MONITOR_BASE (SH7785LCR_FLASH_BASE_1) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) #define CONFIG_SYS_MALLOC_LEN (512 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE (256) #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* FLASH */ diff --git a/include/configs/shannon.h b/include/configs/shannon.h index d848915d0e9..e02d5e76bb4 100644 --- a/include/configs/shannon.h +++ b/include/configs/shannon.h @@ -51,7 +51,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h index fd51219af4c..064749e2d6d 100644 --- a/include/configs/smdk2400.h +++ b/include/configs/smdk2400.h @@ -52,7 +52,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index f9d1e55186f..62fe97e76ac 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -49,7 +49,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index 451b53430c2..f89fc3ef8f8 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -71,7 +71,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for initial data */ /* * Hardware drivers diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index bfd09a0916e..6bea5b2e279 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -63,7 +63,6 @@ * 1MB = 0x100000, 0x100000 = 1024 * 1024 */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for */ /* initial data */ /* * select serial console configuration diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 81f607d7d91..5f2fb1e9279 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -172,8 +172,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size used area in RAM*/ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384KiB for Mon */ diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h index c956e0d7b2f..f1cbe95715e 100644 --- a/include/configs/sorcery.h +++ b/include/configs/sorcery.h @@ -229,8 +229,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h index 91a68404eb0..e39d3bd944b 100644 --- a/include/configs/spc1920.h +++ b/include/configs/spc1920.h @@ -144,8 +144,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index cc52e39ffb6..4e5bdea369a 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -181,7 +181,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00800000 #define CONFIG_SYS_MEMTEST_END 0x04000000 #define CONFIG_SYS_MALLOC_LEN (1024*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_IDENT_STRING "-SPEAr" #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PROMPT "u-boot> " diff --git a/include/configs/spieval.h b/include/configs/spieval.h index cf86735549f..d6195b186a3 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -328,8 +328,7 @@ #endif -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 8fc3d403660..c2497ad09c1 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -157,8 +157,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 42188ddfa9d..996120a02b1 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -169,8 +169,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index cb8abea360e..890186e9148 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -169,8 +169,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index 9f12e73de95..22486807f44 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -194,8 +194,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index a31e3b6baf4..6115a5f4132 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -98,9 +98,8 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* diff --git a/include/configs/taihu.h b/include/configs/taihu.h index 493e3e02d6f..a3738b7b1d2 100644 --- a/include/configs/taihu.h +++ b/include/configs/taihu.h @@ -290,8 +290,7 @@ unsigned char spi_read(void); #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/taishan.h b/include/configs/taishan.h index 29b60a109a7..3046081c52e 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -69,9 +69,8 @@ #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM*/ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h index f423a0eb269..68290efca56 100644 --- a/include/configs/tnetv107x_evm.h +++ b/include/configs/tnetv107x_evm.h @@ -50,7 +50,6 @@ /* Memory Info */ #define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define PHYS_SDRAM_1 TNETV107X_DDR_EMIF_DATA_BASE #define PHYS_SDRAM_1_SIZE 0x04000000 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index 5af2af3d1cb..31a0bdf9f0d 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -164,7 +164,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ diff --git a/include/configs/trab.h b/include/configs/trab.h index 9827195e8d5..d5736a23d22 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -95,7 +95,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index ac3566cad16..2512f93f9c6 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -57,7 +57,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -214,7 +213,7 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) /* * GPIO settings diff --git a/include/configs/tx25.h b/include/configs/tx25.h index 996afa3b070..8f8a1a377eb 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -66,7 +66,6 @@ /* malloc() len */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ /* reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Board has 2 32MB banks of DRAM but there is a bug when using * both so only the first is configured @@ -179,6 +178,6 @@ /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #endif /* __CONFIG_H */ diff --git a/include/configs/uc100.h b/include/configs/uc100.h index 5d55279cac1..9da318d4278 100644 --- a/include/configs/uc100.h +++ b/include/configs/uc100.h @@ -201,8 +201,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index b962c499aa4..bb9f606a05f 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -198,8 +198,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 #define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE) -#define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /*-------------------------------------------------------------------- * NS16550 Configuration diff --git a/include/configs/v37.h b/include/configs/v37.h index 0d9a2499091..a3fdc38ae1f 100644 --- a/include/configs/v37.h +++ b/include/configs/v37.h @@ -159,8 +159,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 4a97cac88a9..47bb84610df 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -229,8 +229,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 11b9cfced2c..abb57fe94c5 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -173,9 +173,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 4273b84a44a..45d8434437d 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -76,7 +76,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Hardware drivers diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index d98fc20bed5..466d930b983 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -177,8 +177,7 @@ */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 7bc63180c71..1d971931b41 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -46,7 +46,6 @@ #define CONFIG_SYS_MALLOC_LEN (2048 * 1024) /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* * Hardware drivers @@ -194,7 +193,7 @@ #ifndef CONFIG_SYS_ARM_WITHOUT_RELOC #define CONFIG_SYS_INIT_RAM_SIZE (64 * 1024) #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_GBL_DATA_OFFSET) #undef CONFIG_SKIP_RELOCATE_UBOOT diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 81c7489252d..d153762885f 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -163,9 +163,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xF7000000 /* Initial RAM addr */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* size */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* size init data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB */ diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index d46717cd253..c258030e297 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -71,7 +71,6 @@ /* * Size of malloc() pool and stack */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) #define CONFIG_STACKSIZE (1 * 1024 * 1024) diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index 3107014922d..35afcd356c5 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -34,7 +34,6 @@ */ #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_ARCH_CPU_INIT #define CONFIG_BOOTCOMMAND \ "if mmc init && fatload mmc 0 0xa4000000 uImage; then " \ @@ -185,7 +184,7 @@ #define CONFIG_SYS_IPL_LOAD_ADDR (0x5c000000) #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_SP_ADDR \ - (PHYS_SDRAM_1 + CONFIG_SYS_GBL_DATA_SIZE + 2048) + (PHYS_SDRAM_1 + GENERATED_GBL_DATA_SIZE + 2048) /* * NOR FLASH diff --git a/include/configs/walnut.h b/include/configs/walnut.h index 6e063f5a29f..d10f74843d2 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -218,8 +218,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* inside of SDRAM */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 18b68fafae1..a75c426dfa2 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -115,7 +115,6 @@ * used for the RAM copy of the uboot code */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Miscellaneous configurable options @@ -169,7 +168,7 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) /* * FLASH and environment organization diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index d377848e556..2422c0b0c34 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -92,9 +92,8 @@ /*Stack*/ #define CONFIG_SYS_INIT_RAM_ADDR 0x800000/* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - CONFIG_SYS_GBL_DATA_SIZE) + - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*Speed*/ #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ diff --git a/include/configs/xm250.h b/include/configs/xm250.h index ea52454aa60..497cb9198f8 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -46,7 +46,6 @@ * */ #define CONFIG_SYS_MALLOC_LEN (256*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -176,7 +175,7 @@ #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) /* * FLASH and environment organization diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h index 9103b6a0334..cd7148df153 100644 --- a/include/configs/xpedite1000.h +++ b/include/configs/xpedite1000.h @@ -103,8 +103,7 @@ extern void out32(unsigned int, unsigned long); #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index a4e485ce495..cb83a646711 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -220,8 +220,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index eb73fa846d1..b6b391f89f4 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -188,8 +188,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index dd8d22692c4..e0a1fa406cd 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -226,8 +226,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 3c6bf5cf006..42d1f6980eb 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -216,8 +216,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 85b88c8be5d..0cbef6f85f7 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -78,8 +78,7 @@ #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram */ #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ #define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data*/ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 55a364c2ca7..fb684b5e106 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -98,9 +98,8 @@ #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- diff --git a/include/configs/zeus.h b/include/configs/zeus.h index d24ea0b7070..f9a6b9313f6 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -255,8 +255,7 @@ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of OCM */ #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* reserve some memory for POST and BOOT limit info */ #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 16) diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index 48537e3ccb1..a8b88dae37b 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -43,7 +43,6 @@ #define CONFIG_ENV_SIZE 0x20000 #define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 512 #define CONFIG_ARCH_CPU_INIT #define CONFIG_BOOTCOMMAND \ @@ -178,7 +177,7 @@ unsigned char zipitz2_spi_read(void); #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1 + 2048) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1 + 2048) /* * NOR FLASH diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index c33ca2de918..4ecef94514b 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -55,7 +55,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -191,7 +190,7 @@ #undef CONFIG_SYS_SKIP_DRAM_SCRUB #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1) /* * NAND Flash diff --git a/lib/asm-offsets.c b/lib/asm-offsets.c index 4eb61747c4f..22095610f93 100644 --- a/lib/asm-offsets.c +++ b/lib/asm-offsets.c @@ -21,5 +21,9 @@ int main(void) { + /* Round up to make sure size gives nice stack alignment */ + DEFINE(GENERATED_GBL_DATA_SIZE, + (sizeof(struct global_data)+15) & ~15); + return 0; } From 123fb7deb238cf9d03e82f98962ed7f03d09703a Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Mon, 25 Oct 2010 13:45:35 +0300 Subject: [PATCH 084/116] ARM: fix address setup in start.S Fix address setup bug for ARM. This bug stops u-boot booting if CONFIG_SKIP_RELOCATE_UBOOT is defined. Signed-off-by: Darius Augulis --- arch/arm/cpu/arm1136/start.S | 6 ++++-- arch/arm/cpu/arm926ejs/start.S | 6 ++++-- arch/arm/cpu/armv7/start.S | 6 ++++-- arch/arm/cpu/pxa/start.S | 6 ++++-- 4 files changed, 16 insertions(+), 8 deletions(-) diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 07d0c859cb8..e3e646ca611 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -297,8 +297,10 @@ _nand_boot_ofs jump_2_ram: ldr r0, _board_init_r_ofs adr r1, _start - add r0, r0, r1 - add lr, r0, r9 + add lr, r0, r1 +#ifndef CONFIG_SKIP_RELOCATE_UBOOT + add lr, lr, r9 +#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 69e1a33174f..7397882b59e 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -286,8 +286,10 @@ _nand_boot_ofs: #else ldr r0, _board_init_r_ofs adr r1, _start - add r0, r0, r1 - add lr, r0, r9 + add lr, r0, r1 +#ifndef CONFIG_SKIP_RELOCATE_UBOOT + add lr, lr, r9 +#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index b9eb0c9b586..bdf2fad3802 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -275,8 +275,10 @@ clbss_l:str r2, [r0] /* clear loop... */ jump_2_ram: ldr r0, _board_init_r_ofs adr r1, _start - add r0, r0, r1 - add lr, r0, r9 + add lr, r0, r1 +#ifndef CONFIG_SKIP_RELOCATE_UBOOT + add lr, lr, r9 +#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index b8065b70df5..bf8510eb768 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -331,8 +331,10 @@ _start_oneboot_ofs #else ldr r0, _board_init_r_ofs adr r1, _start - add r0, r0, r1 - add lr, r0, r9 + add lr, r0, r1 +#ifndef CONFIG_SKIP_RELOCATE_UBOOT + add lr, lr, r9 +#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ From ea34c9d6ed0d66a16c0a2500bc3b6d8a596dbf29 Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Mon, 25 Oct 2010 13:48:03 +0300 Subject: [PATCH 085/116] arm1176: fix relocation Fix relocation code for arm1176, do it like other ARM CPU's are doing. Tested only with CONFIG_SKIP_RELOCATE_UBOOT defined and using nand_spl (booting from nand). Test done on s3c6410 based board (not yet supported in main line). Signed-off-by: Darius Augulis --- arch/arm/cpu/arm1176/start.S | 145 +++++++++++++++++++------------- arch/arm/cpu/arm1176/u-boot.lds | 15 +++- 2 files changed, 98 insertions(+), 62 deletions(-) diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index c13ccebf895..7f32db78742 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -116,14 +116,46 @@ _armboot_start: /* * These are defined in the board-specific linker script. + * Subtracting _start from them lets the linker put their + * relative position in the executable instead of leaving + * them null. */ -.globl _bss_start -_bss_start: - .word __bss_start -.globl _bss_end -_bss_end: - .word _end +.globl _bss_start_ofs +_bss_start_ofs: + .word __bss_start - _start + +.globl _bss_end_ofs +_bss_end_ofs: + .word _end - _start + +.globl _datarel_start_ofs +_datarel_start_ofs: + .word __datarel_start - _start + +.globl _datarelrolocal_start_ofs +_datarelrolocal_start_ofs: + .word __datarelrolocal_start - _start + +.globl _datarellocal_start_ofs +_datarellocal_start_ofs: + .word __datarellocal_start - _start + +.globl _datarelro_start_ofs +_datarelro_start_ofs: + .word __datarelro_start - _start + +.globl _rel_dyn_start_ofs +_rel_dyn_start_ofs: + .word __rel_dyn_start - _start + +.globl _rel_dyn_end_ofs +_rel_dyn_end_ofs: + .word __rel_dyn_end - _start + +.globl _dynsym_start_ofs +_dynsym_start_ofs: + .word __dynsym_start - _start #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ @@ -131,30 +163,6 @@ _bss_end: IRQ_STACK_START_IN: .word 0x0badc0de -.globl _datarel_start -_datarel_start: - .word __datarel_start - -.globl _datarelrolocal_start -_datarelrolocal_start: - .word __datarelrolocal_start - -.globl _datarellocal_start -_datarellocal_start: - .word __datarellocal_start - -.globl _datarelro_start -_datarelro_start: - .word __datarelro_start - -.globl _got_start -_got_start: - .word __got_start - -.globl _got_end -_got_end: - .word __got_end - /* * the actual reset code */ @@ -275,9 +283,8 @@ stack_setup: adr r0, _start ldr r2, _TEXT_BASE - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ + ldr r3, _bss_start_ofs + add r2, r0, r3 /* r2 <- source end address */ cmp r0, r6 beq clear_bss @@ -289,24 +296,44 @@ copy_loop: blo copy_loop #ifndef CONFIG_PRELOADER - /* fix got entries */ - ldr r1, _TEXT_BASE /* Text base */ - mov r0, r7 /* reloc addr */ - ldr r2, _got_start /* addr in Flash */ - ldr r3, _got_end /* addr in Flash */ - sub r3, r3, r1 - add r3, r3, r0 - sub r2, r2, r1 - add r2, r2, r0 - + /* + * fix .rel.dyn relocations + */ + ldr r0, _TEXT_BASE /* r0 <- Text base */ + sub r9, r7, r0 /* r9 <- relocation offset */ + ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ + add r10, r10, r0 /* r10 <- sym table in FLASH */ + ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ + add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ + ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ + add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ fixloop: - ldr r4, [r2] - sub r4, r4, r1 - add r4, r4, r0 - str r4, [r2] - add r2, r2, #4 + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r0, r9 /* r0 <- location to fix up in RAM */ + ldr r1, [r2, #4] + and r8, r1, #0xff + cmp r8, #23 /* relative fixup? */ + beq fixrel + cmp r8, #2 /* absolute fixup? */ + beq fixabs + /* ignore unknown type of fixup */ + b fixnext +fixabs: + /* absolute fix: set location to (offset) symbol value */ + mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ + add r1, r10, r1 /* r1 <- address of symbol in table */ + ldr r1, [r1, #4] /* r1 <- symbol value */ + add r1, r1, r9 /* r1 <- relocated sym addr */ + b fixnext +fixrel: + /* relative fix: increase location by offset */ + ldr r1, [r0] + add r1, r1, r9 +fixnext: + str r1, [r0] + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ @@ -350,13 +377,11 @@ skip_hw_init: clear_bss: #ifndef CONFIG_PRELOADER - ldr r0, _bss_start - ldr r1, _bss_end + ldr r0, _bss_start_ofs + ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ mov r4, r7 /* reloc addr */ - sub r0, r0, r3 add r0, r0, r4 - sub r1, r1, r3 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -378,18 +403,20 @@ clbss_l:str r2, [r0] /* clear loop... */ _nand_boot: .word nand_boot #else - ldr r0, _TEXT_BASE - ldr r2, _board_init_r - sub r2, r2, r0 - add r2, r2, r7 /* position from board_init_r in RAM */ + ldr r0, _board_init_r_ofs + adr r1, _start + add lr, r0, r1 +#ifndef CONFIG_SKIP_RELOCATE_UBOOT + add lr, lr, r9 +#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ /* jump to it ... */ - mov lr, r2 mov pc, lr -_board_init_r: .word board_init_r +_board_init_r_ofs: + .word board_init_r - _start #endif #else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ diff --git a/arch/arm/cpu/arm1176/u-boot.lds b/arch/arm/cpu/arm1176/u-boot.lds index fa640eec200..d9ed95405d8 100644 --- a/arch/arm/cpu/arm1176/u-boot.lds +++ b/arch/arm/cpu/arm1176/u-boot.lds @@ -51,11 +51,14 @@ SECTIONS *(.data.rel.ro) } - __got_start = .; . = ALIGN(4); - .got : { *(.got) } + __rel_dyn_start = .; + .rel.dyn : { *(.rel.dyn) } + __rel_dyn_end = .; + + __dynsym_start = .; + .dynsym : { *(.dynsym) } - __got_end = .; . = .; __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } @@ -65,4 +68,10 @@ SECTIONS __bss_start = .; .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } _end = .; + + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } } From 8f4cb77ef7183ce1bb3f767604a0677c6f6d84a7 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 20 Oct 2010 03:33:30 -0400 Subject: [PATCH 086/116] cmd_net: drop spurious comma in U_BOOT_CMD Building for boards that have CONFIG_CMD_CDP enabled fail with: cmd_net.c:301: error: expected expression before ',' token Signed-off-by: Mike Frysinger --- common/cmd_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/common/cmd_net.c b/common/cmd_net.c index 44d17db19c5..b1310069647 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -297,7 +297,7 @@ int do_cdp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD( cdp, 1, 1, do_cdp, - "Perform CDP network configuration", + "Perform CDP network configuration" ); #endif From 1336cad29855b279b6a8873d321a062717495ecf Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 25 Oct 2010 08:33:38 +0200 Subject: [PATCH 087/116] arm, bootm: Fix compile warning Fix warning: bootm.c: In function 'bootm_linux_fdt': bootm.c:181: warning: unused variable 's' bootm.c:180: warning: unused variable 'bd' Signed-off-by: Heiko Schocher --- arch/arm/lib/bootm.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 2e7b2e1f33f..a1649eef0d1 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -177,8 +177,6 @@ static int fixup_memory_node(void *blob) static int bootm_linux_fdt(int machid, bootm_headers_t *images) { ulong rd_len; - bd_t *bd = gd->bd; - char *s; void (*kernel_entry)(int zero, int dt_machid, void *dtblob); ulong bootmap_base = getenv_bootm_low(); ulong of_size = images->ft_len; From f760d14acc65c690743ac54a4291e972fed01eb7 Mon Sep 17 00:00:00 2001 From: Sughosh Ganu Date: Sat, 23 Oct 2010 00:58:03 +0530 Subject: [PATCH 088/116] Remove config.mk for da8xxevm based boards. Move CONFIG_SYS_TEXT_BASE to the board's config file, and remove the now unnecessary config.mk file. Signed-off-by: Sughosh Ganu Tested-by: Ben Gardiner --- board/davinci/da8xxevm/config.mk | 43 -------------------------------- include/configs/da830evm.h | 1 + include/configs/da850evm.h | 1 + 3 files changed, 2 insertions(+), 43 deletions(-) delete mode 100644 board/davinci/da8xxevm/config.mk diff --git a/board/davinci/da8xxevm/config.mk b/board/davinci/da8xxevm/config.mk deleted file mode 100644 index e176f7d51a5..00000000000 --- a/board/davinci/da8xxevm/config.mk +++ /dev/null @@ -1,43 +0,0 @@ -# -# (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/ -# -# Copyright (C) 2007 Sergey Kubushyn -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, -# David Mueller, ELSOFT AG, -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# Texas Instruments DA8xx EVM board (ARM925EJS) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# DA8xx EVM has 1 bank of 64 MB SDRAM (2 16Meg x16 chips). -# Physical Address: -# C000'0000 to C400'0000 -# -# Linux-Kernel is expected to be at C000'8000, entry C000'8000 -# (mem base + reserved) -# -# we load ourself to C108 '0000 - - -#Provide at least 16MB spacing between us and the Linux Kernel image -CONFIG_SYS_TEXT_BASE = 0xC1080000 diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index d8f1e9fd61c..906b8e76a71 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -42,6 +42,7 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ +#define CONFIG_SYS_TEXT_BASE 0xc1080000 /* * Memory Info diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 11f2869613d..7b04be05b9b 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -40,6 +40,7 @@ #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) #define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0xc1080000 /* * Memory Info From 79e63139368eb7233b738d3d5a0df018a1287e3b Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sat, 23 Oct 2010 23:22:38 +0200 Subject: [PATCH 089/116] ARM: use the same branch insn on all architectures For the "fixloop" implementation in start.S a number of different instructions was used. Unify code so all architectures use "blo" here because it is more robust in case of incorrect alignments. Signed-off-by: Wolfgang Denk Cc: Albert ARIBAUD Cc: Minkyu Kang Cc: Sandeep Paulraj Cc: Prafulla Wadaskar Cc: Stefano Babic Cc: Marek Vasut Acked-by: Heiko Schocher --- arch/arm/cpu/arm1136/start.S | 2 +- arch/arm/cpu/arm720t/start.S | 2 +- arch/arm/cpu/arm920t/start.S | 2 +- arch/arm/cpu/arm925t/start.S | 2 +- arch/arm/cpu/arm946es/start.S | 2 +- arch/arm/cpu/arm_intcm/start.S | 2 +- arch/arm/cpu/ixp/start.S | 2 +- arch/arm/cpu/lh7a40x/start.S | 2 +- arch/arm/cpu/s3c44b0/start.S | 2 +- arch/arm/cpu/sa1100/start.S | 2 +- 10 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index e3e646ca611..d70ca1d515d 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -263,7 +263,7 @@ fixnext: str r1, [r0] add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 - ble fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 06aa3a25d41..41c1519efef 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -222,7 +222,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 84f754677f6..f0274b1f82a 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -268,7 +268,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index f45ad891bc2..2ad2df847ee 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -259,7 +259,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 25b573bcdf4..22af2fae95f 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -228,7 +228,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index 3e9d5e8c93d..a420f44ff5f 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -226,7 +226,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index 2931ccd6167..a2560d4c2ad 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -352,7 +352,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S index 703baf89a20..239ad47a4f1 100644 --- a/arch/arm/cpu/lh7a40x/start.S +++ b/arch/arm/cpu/lh7a40x/start.S @@ -239,7 +239,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index 77f3735e54e..c58da987988 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -211,7 +211,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif /* now copy to sram the interrupt vector diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 5635e0a30f5..e6afe0f86fb 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -215,7 +215,7 @@ fixloop: str r4, [r2] add r2, r2, #4 cmp r2, r3 - bne fixloop + blo fixloop #endif #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ From 8343f8a76434b7162cf5a4da5f456b014868853c Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 26 Oct 2010 23:22:36 +0200 Subject: [PATCH 090/116] post/drivers/i2c.c: fix compile error Commit 7e263ce "post/i2c: Clean up detection logic" added a "const" qualifier to the declaration of i2c_addr_list[], missing the fact that the list gets modified later in the code, which results in build errors like these: i2c.c: In function 'i2c_post_test': i2c.c:88: error: assignment of read-only location Remove the incorrect "const". Signed-off-by: Wolfgang Denk Cc: Peter Tyser Cc: Heiko Schocher Acked-by: Heiko Schocher --- post/drivers/i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/post/drivers/i2c.c b/post/drivers/i2c.c index 3080e81b5bf..4a1b1a49d17 100644 --- a/post/drivers/i2c.c +++ b/post/drivers/i2c.c @@ -74,7 +74,7 @@ int i2c_post_test (int flags) #else unsigned int ret = 0; int j; - const unsigned char i2c_addr_list[] = CONFIG_SYS_POST_I2C_ADDRS; + unsigned char i2c_addr_list[] = CONFIG_SYS_POST_I2C_ADDRS; /* Start at address 1, address 0 is the general call address */ for (i = 1; i < 128; i++) { From ec5c04cdb59e2f194a4ab2336fd2ffd6fcef3c35 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 26 Oct 2010 23:42:23 +0200 Subject: [PATCH 091/116] Revert "cmd_net: drop spurious comma in U_BOOT_CMD" This commit causes build errors like this: cmd_net.c:301:1: error: macro "U_BOOT_CMD" requires 6 arguments, but only 5 given cmd_net.c:298: warning: data definition has no type or storage class cmd_net.c:298: warning: type defaults to 'int' in declaration of 'U_BOOT_CMD' This reverts commit 8f4cb77ef7183ce1bb3f767604a0677c6f6d84a7. --- common/cmd_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/common/cmd_net.c b/common/cmd_net.c index b1310069647..44d17db19c5 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -297,7 +297,7 @@ int do_cdp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD( cdp, 1, 1, do_cdp, - "Perform CDP network configuration" + "Perform CDP network configuration", ); #endif From f503d52a9ee5bceaedbc4d8331d397aab96092ff Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 27 Oct 2010 10:29:56 +0200 Subject: [PATCH 092/116] mcu25: fix out of tree building Out of tree building of the Netstal mcu25 board failed like that: Configuring for mcu25 board... Assembler messages: Fatal error: can't create /work/wd/tmp-ppc/board/netstal/mcu25/../common/fixed_sdram.o: No such file or directory Assembler messages: Fatal error: can't create /work/wd/tmp-ppc/board/netstal/mcu25/../common/nm_bsp.o: No such file or directory Adapt (and simplify) the Makefile. Signed-off-by: Wolfgang Denk Cc: Niklaus Giger --- board/netstal/mcu25/Makefile | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/board/netstal/mcu25/Makefile b/board/netstal/mcu25/Makefile index 6722d53927e..cd626428944 100644 --- a/board/netstal/mcu25/Makefile +++ b/board/netstal/mcu25/Makefile @@ -19,24 +19,24 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif LIB = $(obj)lib$(BOARD).a -# NOBJS : Netstal common objects -NOBJS = fixed_sdram.o nm_bsp.o -COBJS = $(BOARD).o -SOBJS = +COBJS = $(BOARD).o \ + ../common/fixed_sdram.o \ + ../common/nm_bsp.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) $(addprefix ../common/,$(NOBJS:.o=.c)) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -NOBJS := $(addprefix $(obj)../common/,$(NOBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) $(NOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) $(NOBJS) +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $^ clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend From e4691f5ed1a60a019505359b5033698cc813a787 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 27 Oct 2010 08:31:42 +0200 Subject: [PATCH 093/116] make-asm-offsets: fix sed script When copying the "sed" script to generate the asm-offsets.h file from the Linux Kbuild script into the make-asm-offsets file I missed the fact that the former runs in a "make" context and thus uses double "$$" to escape a single "$", while the latter is a shell script, where this must not be done. Unfortunately the problem did not show up during the initial tests on Power Architecture systems, but on ARM the generated asm-offsets.h was not correct. Signed-off-by: Wolfgang Denk Tested-by: Heiko Schocher Tested-by: Ben Gardiner --- tools/scripts/make-asm-offsets | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/scripts/make-asm-offsets b/tools/scripts/make-asm-offsets index 61c095f4264..4c33756d66e 100755 --- a/tools/scripts/make-asm-offsets +++ b/tools/scripts/make-asm-offsets @@ -8,8 +8,8 @@ mkdir -p $(dirname $2) # Default sed regexp - multiline due to syntax constraints SED_CMD="/^->/{s:->#\(.*\):/* \1 */:; \ - s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 (\2) /* \3 */:; \ - s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \ + s:^->\([^ ]*\) [\$#]*\([-0-9]*\) \(.*\):#define \1 (\2) /* \3 */:; \ + s:^->\([^ ]*\) [\$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \ s:->::; p;}" (set -e From f0fee6a6469509a6cf1df88a81a73735f74b5a5d Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 27 Oct 2010 11:06:51 +0200 Subject: [PATCH 094/116] Makefile: fix dependencies for building NAND_SPL Building of NAND based boards failed sometimes (especially on MP systems) because of incorrect / missing dependencies. Signed-off-by: Wolfgang Denk Tested-by: Heiko Schocher --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index b50830a45ff..5c83b07da59 100644 --- a/Makefile +++ b/Makefile @@ -401,7 +401,7 @@ $(LDSCRIPT): depend $(obj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ -$(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk +$(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) depend $(MAKE) -C nand_spl/board/$(BOARDDIR) all $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin From a3110f01c408713e98756f136e09ec2bf0b16625 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Wed, 27 Oct 2010 11:06:20 +0200 Subject: [PATCH 095/116] env_sf: updated to the new environment code Functions to store/retrieve the environment from a SPI flash was not updated to the new environment code. The non-redundant case was not working correctly, reporting ""Environment SPI flash not initialized" and the code was not compiled clean in the redundant case. The patch fixes these issue and makes the code more coherent with other environment storage (nand, flash). Signed-off-by: Stefano Babic --- common/env_sf.c | 172 ++++++++++++++++++++++-------------------------- 1 file changed, 77 insertions(+), 95 deletions(-) diff --git a/common/env_sf.c b/common/env_sf.c index fb0c39b3ce8..a597b24dcb3 100644 --- a/common/env_sf.c +++ b/common/env_sf.c @@ -51,7 +51,7 @@ static ulong env_new_offset = CONFIG_ENV_OFFSET_REDUND; #define ACTIVE_FLAG 1 #define OBSOLETE_FLAG 0 -#endif /* CONFIG_ENV_ADDR_REDUND */ +#endif /* CONFIG_ENV_OFFSET_REDUND */ DECLARE_GLOBAL_DATA_PTR; @@ -69,13 +69,6 @@ uchar env_get_char_spec(int index) } #if defined(CONFIG_ENV_OFFSET_REDUND) -void swap_env(void) -{ - ulong tmp_offset = env_offset; - - env_offset = env_new_offset; - env_new_offset = tmp_offset; -} int saveenv(void) { @@ -89,8 +82,13 @@ int saveenv(void) char flag = OBSOLETE_FLAG, new_flag = ACTIVE_FLAG; if (!env_flash) { - puts("Environment SPI flash not initialized\n"); - return 1; + env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, + CONFIG_ENV_SPI_CS, + CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); + if (!env_flash) { + set_default_env("!spi_flash_probe() failed"); + return 1; + } } res = (char *)&env_new.data; @@ -102,6 +100,14 @@ int saveenv(void) env_new.crc = crc32(0, env_new.data, ENV_SIZE); env_new.flags = ACTIVE_FLAG; + if (gd->env_valid == 1) { + env_new_offset = CONFIG_ENV_OFFSET_REDUND; + env_offset = CONFIG_ENV_OFFSET; + } else { + env_new_offset = CONFIG_ENV_OFFSET; + env_offset = CONFIG_ENV_OFFSET_REDUND; + } + /* Is the sector larger than the env (i.e. embedded) */ if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) { saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE; @@ -130,27 +136,9 @@ int saveenv(void) goto done; puts("Writing to SPI flash..."); - ret = spi_flash_write(env_flash, - env_new_offset + offsetof(env_t, data), - sizeof(env_new.data), env_new.data); - if (ret) - goto done; - ret = spi_flash_write(env_flash, - env_new_offset + offsetof(env_t, crc), - sizeof(env_new.crc), &env_new.crc); - if (ret) - goto done; - - ret = spi_flash_write(env_flash, - env_offset + offsetof(env_t, flags), - sizeof(env_new.flags), &flag); - if (ret) - goto done; - - ret = spi_flash_write(env_flash, - env_new_offset + offsetof(env_t, flags), - sizeof(env_new.flags), &new_flag); + ret = spi_flash_write(env_flash, env_new_offset, + CONFIG_ENV_SIZE, &env_new); if (ret) goto done; @@ -161,11 +149,18 @@ int saveenv(void) goto done; } - swap_env(); + ret = spi_flash_write(env_flash, + env_offset + offsetof(env_t, flags), + sizeof(env_new.flags), &flag); + if (ret) + goto done; - ret = 0; puts("done\n"); + gd->env_valid = (gd->env_valid == 2 ? 1 : 2); + + printf("Valid environment: %d\n", gd->env_valid); + done: if (saved_buffer) free(saved_buffer); @@ -178,7 +173,7 @@ void env_relocate_spec(void) int crc1_ok = 0, crc2_ok = 0; env_t *tmp_env1 = NULL; env_t *tmp_env2 = NULL; - env_t ep; + env_t *ep = NULL; uchar flag1, flag2; /* current_env is set only in case both areas are valid! */ int current_env = 0; @@ -219,90 +214,57 @@ void env_relocate_spec(void) flag2 = tmp_env2->flags; } - if (!crc1_ok && !crc2_ok) - goto err_crc; - else if (crc1_ok && !crc2_ok) { + if (!crc1_ok && !crc2_ok) { + free(tmp_env1); + free(tmp_env2); + set_default_env("!bad CRC"); + return; + } else if (crc1_ok && !crc2_ok) { gd->env_valid = 1; ep = tmp_env1; } else if (!crc1_ok && crc2_ok) { gd->env_valid = 1; - ep = tmp_env2; - swap_env(); } else if (flag1 == ACTIVE_FLAG && flag2 == OBSOLETE_FLAG) { gd->env_valid = 1; - ep = tmp_env1; } else if (flag1 == OBSOLETE_FLAG && flag2 == ACTIVE_FLAG) { - gd->env_valid = 1; - ep = tmp_env2; - swap_env(); + gd->env_valid = 2; } else if (flag1 == flag2) { gd->env_valid = 2; - ep = tmp_env1; - current_env = 1; } else if (flag1 == 0xFF) { gd->env_valid = 2; - ep = tmp_env1; - current_env = 1; } else { /* * this differs from code in env_flash.c, but I think a sane * default path is desirable. */ gd->env_valid = 2; + } + + free(env_ptr); + + if (gd->env_valid == 1) + ep = tmp_env1; + else ep = tmp_env2; - swap_env(); - current_env = 2; - } - rc = env_import((char *)ep, 0); - if (!rc) { + ret = env_import((char *)ep, 0); + if (!ret) { error("Cannot import environment: errno = %d\n", errno); - goto out; + set_default_env("env_import failed"); } - if (current_env == 1) { - if (flag2 != OBSOLETE_FLAG) { - flag2 = OBSOLETE_FLAG; - spi_flash_write(env_flash, - env_new_offset + offsetof(env_t, flags), - sizeof(env_new.flags), &flag2); - } - if (flag1 != ACTIVE_FLAG) { - flag1 = ACTIVE_FLAG; - spi_flash_write(env_flash, - env_offset + offsetof(env_t, flags), - sizeof(env_new.flags), &flag1); - } - } else if (current_env == 2) { - if (flag1 != OBSOLETE_FLAG) { - flag1 = OBSOLETE_FLAG; - spi_flash_write(env_flash, - env_new_offset + offsetof(env_t, flags), - sizeof(env_new.flags), &flag1); - } - if (flag2 != ACTIVE_FLAG) { - flag2 = ACTIVE_FLAG; - spi_flash_write(env_flash, - env_offset + offsetof(env_t, flags), - sizeof(env_new.flags), &flag2); - } - } - if (gd->env_valid == 2) { - puts("*** Warning - some problems detected " - "reading environment; recovered successfully\n\n"); - } - if (tmp_env1) - free(tmp_env1); - if (tmp_env2) - free(tmp_env2); - return; - err_read: spi_flash_free(env_flash); env_flash = NULL; out: + if (tmp_env1) + free(tmp_env1); + if (tmp_env2) + free(tmp_env2); free(tmp_env1); free(tmp_env2); + + return; } #else int saveenv(void) @@ -311,10 +273,18 @@ int saveenv(void) char *saved_buffer = NULL; u32 sector = 1; int ret; + env_t env_new; + char *res; + ssize_t len; if (!env_flash) { - puts("Environment SPI flash not initialized\n"); - return 1; + env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, + CONFIG_ENV_SPI_CS, + CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); + if (!env_flash) { + set_default_env("!spi_flash_probe() failed"); + return 1; + } } /* Is the sector larger than the env (i.e. embedded) */ @@ -326,7 +296,8 @@ int saveenv(void) ret = 1; goto done; } - ret = spi_flash_read(env_flash, saved_offset, saved_size, saved_buffer); + ret = spi_flash_read(env_flash, saved_offset, + saved_size, saved_buffer); if (ret) goto done; } @@ -337,18 +308,29 @@ int saveenv(void) sector++; } + res = (char *)&env_new.data; + len = hexport('\0', &res, ENV_SIZE); + if (len < 0) { + error("Cannot export environment: errno = %d\n", errno); + goto done; + } + env_new.crc = crc32(0, env_new.data, ENV_SIZE); + puts("Erasing SPI flash..."); - ret = spi_flash_erase(env_flash, CONFIG_ENV_OFFSET, sector * CONFIG_ENV_SECT_SIZE); + ret = spi_flash_erase(env_flash, CONFIG_ENV_OFFSET, + sector * CONFIG_ENV_SECT_SIZE); if (ret) goto done; puts("Writing to SPI flash..."); - ret = spi_flash_write(env_flash, CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, env_ptr); + ret = spi_flash_write(env_flash, CONFIG_ENV_OFFSET, + CONFIG_ENV_SIZE, &env_new); if (ret) goto done; if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) { - ret = spi_flash_write(env_flash, saved_offset, saved_size, saved_buffer); + ret = spi_flash_write(env_flash, saved_offset, + saved_size, saved_buffer); if (ret) goto done; } From 0158126e252b6860e7a7d8408d0872278a3483cf Mon Sep 17 00:00:00 2001 From: Lei Wen Date: Thu, 14 Oct 2010 13:38:11 +0800 Subject: [PATCH 096/116] mmc: seperate block number into small parts for multi-write cmd Constraint the mmc framework to only send no more than 65535 blocks in one go during the multi-write command. This constraint comes due to the limitation of 16bit width block counter register at some hardware. Signed-off-by: Lei Wen Cc: Reinhard Meyer --- drivers/mmc/mmc.c | 54 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 39 insertions(+), 15 deletions(-) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index c543d837dc7..eb7bfb39e92 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -78,17 +78,11 @@ struct mmc *find_mmc_device(int dev_num) } static ulong -mmc_bwrite(int dev_num, ulong start, lbaint_t blkcnt, const void*src) +mmc_write_blocks(struct mmc *mmc, ulong start, lbaint_t blkcnt, const void*src) { struct mmc_cmd cmd; struct mmc_data data; - int err; - int stoperr = 0; - struct mmc *mmc = find_mmc_device(dev_num); - int blklen; - - if (!mmc) - return -1; + int blklen, err; blklen = mmc->write_bl_len; @@ -97,12 +91,6 @@ mmc_bwrite(int dev_num, ulong start, lbaint_t blkcnt, const void*src) start + blkcnt, mmc->block_dev.lba); return 0; } - err = mmc_set_blocklen(mmc, mmc->write_bl_len); - - if (err) { - printf("set write bl len failed\n\r"); - return err; - } if (blkcnt > 1) cmd.cmdidx = MMC_CMD_WRITE_MULTIPLE_BLOCK; @@ -134,12 +122,48 @@ mmc_bwrite(int dev_num, ulong start, lbaint_t blkcnt, const void*src) cmd.cmdarg = 0; cmd.resp_type = MMC_RSP_R1b; cmd.flags = 0; - stoperr = mmc_send_cmd(mmc, &cmd, NULL); + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + printf("mmc fail to send stop cmd\n\r"); + return err; + } } return blkcnt; } +static ulong +mmc_bwrite(int dev_num, ulong start, lbaint_t blkcnt, const void*src) +{ + int err; + struct mmc *mmc = find_mmc_device(dev_num); + lbaint_t cur, blocks_todo = blkcnt; + + if (!mmc) + return -1; + + err = mmc_set_blocklen(mmc, mmc->write_bl_len); + if (err) { + printf("set write bl len failed\n\r"); + return err; + } + + do { + /* + * The 65535 constraint comes from some hardware has + * only 16 bit width block number counter + */ + cur = (blocks_todo > 65535) ? 65535 : blocks_todo; + if(mmc_write_blocks(mmc, start, cur, src) != cur) + return -1; + blocks_todo -= cur; + start += cur; + src += cur * mmc->write_bl_len; + } while (blocks_todo > 0); + + return blkcnt; +} + int mmc_read_block(struct mmc *mmc, void *dst, uint blocknum) { struct mmc_cmd cmd; From 57ff9f2421244db4f27649d1e13393d2b85f224d Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 19 Oct 2010 11:13:21 +0200 Subject: [PATCH 097/116] cmd_onenand.c: Fix command usage help. Running the onenand command without arguments does nothing, with this patch shows the command usage. Signed-off-by: Enric Balletbo i Serra --- common/cmd_onenand.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c index fe84c3be96b..5550b40b81d 100644 --- a/common/cmd_onenand.c +++ b/common/cmd_onenand.c @@ -535,6 +535,9 @@ static int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[] { cmd_tbl_t *c; + if (argc < 2) + return cmd_usage(cmdtp); + mtd = &onenand_mtd; /* Strip off leading 'onenand' command argument */ From 071bc923308832bbc541a887fece767d79a6dc7a Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 27 Oct 2010 22:48:30 +0200 Subject: [PATCH 098/116] Coding Style cleanup Signed-off-by: Wolfgang Denk --- MAKEALL | 2 +- README | 10 +-- arch/arm/cpu/arm926ejs/kirkwood/dram.c | 1 - arch/arm/cpu/pxa/cpu.c | 2 +- arch/microblaze/cpu/start.S | 2 +- arch/sh/lib/bootm.c | 2 +- board/bct-brettl2/cled.c | 2 +- board/davedenx/qong/fpga.c | 1 - board/isee/igep0030/config.mk | 1 - board/xes/common/fsl_8xxx_misc.c | 10 +-- board/xes/xpedite550x/ddr.c | 21 +++-- doc/README.arm-relocation | 14 +-- drivers/fpga/lattice.c | 2 - drivers/mmc/omap_hsmmc.c | 1 - drivers/serial/atmel_usart.h | 2 +- drivers/usb/gadget/config.c | 1 - drivers/usb/gadget/epautoconf.c | 1 - drivers/usb/gadget/ether.c | 1 - drivers/usb/gadget/usbstring.c | 1 - include/configs/a4m072.h | 2 +- include/configs/bct-brettl2.h | 24 ++--- include/configs/blackvme.h | 4 +- include/configs/mx1ads.h | 5 -- include/configs/mx1fs2.h | 5 -- include/configs/scb9328.h | 15 ---- include/lattice.h | 1 - include/linux/fb.h | 120 ++++++++++++------------- include/linux/kbuild.h | 2 +- include/linux/usb/cdc.h | 4 - lib/hashtable.c | 12 +-- lib/qsort.c | 6 +- post/board/lwmon5/fpga.c | 2 - 32 files changed, 117 insertions(+), 162 deletions(-) diff --git a/MAKEALL b/MAKEALL index db11f134b8b..c54c6e8cf95 100755 --- a/MAKEALL +++ b/MAKEALL @@ -56,7 +56,7 @@ LONG_OPTS="arch:,cpu:,vendor:,soc:" # Option processing based on util-linux-2.13/getopt-parse.bash -# Note that we use `"$@"' to let each command-line parameter expand to a +# Note that we use `"$@"' to let each command-line parameter expand to a # separate word. The quotes around `$@' are essential! # We need TEMP as the `eval set --' would nuke the return value of # getopt. diff --git a/README b/README index 3d8742386c0..f559811278d 100644 --- a/README +++ b/README @@ -2364,11 +2364,11 @@ Configuration Settings: - CONFIG_ENV_MAX_ENTRIES - Maximum number of entries in the hash table that is used - internally to store the environment settings. The default - setting is supposed to be generous and should work in most - cases. This setting can be used to tune behaviour; see - lib/hashtable.c for details. + Maximum number of entries in the hash table that is used + internally to store the environment settings. The default + setting is supposed to be generous and should work in most + cases. This setting can be used to tune behaviour; see + lib/hashtable.c for details. The following definitions that deal with the placement and management of environment data (variable area); in general, we support the diff --git a/arch/arm/cpu/arm926ejs/kirkwood/dram.c b/arch/arm/cpu/arm926ejs/kirkwood/dram.c index 7439c87f681..342afe9cd06 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/dram.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/dram.c @@ -93,4 +93,3 @@ void dram_init_banksize(void) dram_init(); } #endif /* CONFIG_SYS_BOARD_DRAM_INIT */ - diff --git a/arch/arm/cpu/pxa/cpu.c b/arch/arm/cpu/pxa/cpu.c index 3ea34582e7a..7d49cbb4fd9 100644 --- a/arch/arm/cpu/pxa/cpu.c +++ b/arch/arm/cpu/pxa/cpu.c @@ -312,7 +312,7 @@ void pxa_wakeup(void) int arch_cpu_init(void) { pxa_gpio_setup(); -// pxa_wait_ticks(0x8000); +/* pxa_wait_ticks(0x8000); */ pxa_wakeup(); pxa_interrupt_setup(); pxa_clock_setup(); diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index d44903b2b8f..93a9efdf106 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -98,7 +98,7 @@ _start: * 0xC: 0xB808XXXX * * then it is necessary to count address for storing the most significant - * 16bits from _exception_handler address and copy it to + * 16bits from _exception_handler address and copy it to * 0xa address. Big endian use offset in r10=0 that's why is it just * 0xa address. The same is done for the least significant 16 bits * for 0xe address. diff --git a/arch/sh/lib/bootm.c b/arch/sh/lib/bootm.c index f38d0b0e8e3..19b3a94023c 100644 --- a/arch/sh/lib/bootm.c +++ b/arch/sh/lib/bootm.c @@ -109,7 +109,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima ramdisk_flags |= RD_PROMPT; else ramdisk_flags &= ~RD_PROMPT; - + val = sh_check_cmd_arg(bootargs, CMD_ARG_RD_DOLOAD, 10); if (val == 1) ramdisk_flags |= RD_DOLOAD; diff --git a/board/bct-brettl2/cled.c b/board/bct-brettl2/cled.c index 9e73c57b878..dcb91bdffad 100644 --- a/board/bct-brettl2/cled.c +++ b/board/bct-brettl2/cled.c @@ -13,7 +13,7 @@ int do_cled(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - ulong addr = 0x20000000 + 0x200000; // AMS2 + ulong addr = 0x20000000 + 0x200000; /* AMS2 */ uchar data; if (argc < 2) diff --git a/board/davedenx/qong/fpga.c b/board/davedenx/qong/fpga.c index f865eb42256..656d5cde95a 100644 --- a/board/davedenx/qong/fpga.c +++ b/board/davedenx/qong/fpga.c @@ -92,4 +92,3 @@ int qong_fpga_init(void) } #endif - diff --git a/board/isee/igep0030/config.mk b/board/isee/igep0030/config.mk index 35865e06a49..019f93f2007 100644 --- a/board/isee/igep0030/config.mk +++ b/board/isee/igep0030/config.mk @@ -31,4 +31,3 @@ # For use with external or internal boots. TEXT_BASE = 0x80008000 - diff --git a/board/xes/common/fsl_8xxx_misc.c b/board/xes/common/fsl_8xxx_misc.c index b7fa6950b07..36e9146654c 100644 --- a/board/xes/common/fsl_8xxx_misc.c +++ b/board/xes/common/fsl_8xxx_misc.c @@ -52,11 +52,9 @@ uint get_board_derivative(void) #endif /* - * The top 4 lines of the local bus address are pulled low/high and - * can be read to determine the least significant digit of a board's - * model number. - */ + * The top 4 lines of the local bus address are pulled low/high and + * can be read to determine the least significant digit of a board's + * model number. + */ return gur->gpporcr >> 28; } - - diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c index 718cd989bbf..38a459715fd 100644 --- a/board/xes/xpedite550x/ddr.c +++ b/board/xes/xpedite550x/ddr.c @@ -55,16 +55,16 @@ unsigned int fsl_ddr_get_mem_data_rate(void) * There are traditionally three board-specific SDRAM timing parameters * which must be calculated based on the particular PCB artwork. These are: * 1.) CPO (Read Capture Delay) - * - TIMING_CFG_2 register - * Source: Calculation based on board trace lengths and - * chip-specific internal delays. + * - TIMING_CFG_2 register + * Source: Calculation based on board trace lengths and + * chip-specific internal delays. * 2.) CLK_ADJUST (Clock and Addr/Cmd alignment control) - * - DDR_SDRAM_CLK_CNTL register - * Source: Signal Integrity Simulations + * - DDR_SDRAM_CLK_CNTL register + * Source: Signal Integrity Simulations * 3.) 2T Timing on Addr/Ctl - * - TIMING_CFG_2 register - * Source: Signal Integrity Simulations - * Usually only needed with heavy load/very high speed (>DDR2-800) + * - TIMING_CFG_2 register + * Source: Signal Integrity Simulations + * Usually only needed with heavy load/very high speed (>DDR2-800) * * ====== XPedite550x DDR3-800 read delay calculations ====== * @@ -82,14 +82,14 @@ typedef struct { const board_specific_parameters_t board_specific_parameters[][20] = { { /* Controller 0 */ - { + { /* DDR3-600/667 */ .datarate_mhz_low = 500, .datarate_mhz_high = 750, .clk_adjust = 5, .cpo = 31, }, - { + { /* DDR3-800 */ .datarate_mhz_low = 750, .datarate_mhz_high = 850, @@ -162,4 +162,3 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->rtt_override = 1; popts->rtt_override_value = 3; } - diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation index 3856633e9d9..dc7be7e42e4 100644 --- a/doc/README.arm-relocation +++ b/doc/README.arm-relocation @@ -93,7 +93,7 @@ Relocation with NAND_SPL (example for the tx25): and start with code execution on this address. - The First page contains u-boot code from u-boot:nand_spl/nand_boot_fsl_nfc.c - which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE and loads + which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE and loads the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution @CONFIG_SYS_NAND_U_BOOT_START @@ -162,7 +162,7 @@ e) load new symbol table: (gdb) add-symbol-file u-boot 0x8ff08000 add symbol table from file "u-boot" at - .text_addr = 0x8ff08000 + .text_addr = 0x8ff08000 (y or n) y Reading symbols from /home/hs/celf/u-boot/u-boot...done. (gdb) c @@ -170,12 +170,12 @@ Continuing. ^C Program received signal SIGSTOP, Stopped (signal). 0x8ff17f18 in serial_getc () at serial_mxc.c:192 -192 while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY); +192 while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY); (gdb) add-symbol-file u-boot 0x8ff08000 - ^^^^^^^^^^ - get this address from u-boot debug printfs + ^^^^^^^^^^ + get this address from u-boot debug printfs U-Boot 2010.06-rc2-00009-gf77b8b8-dirty (Jun 22 2010 - 09:43:46) @@ -187,7 +187,7 @@ Top of RAM usable for U-Boot at: 90000000 LCD panel info: 640 x 480, 16 bit/pix Reserving 600k for LCD Framebuffer at: 8ff6a000 Reserving 391k for U-Boot at: 8ff08000 - ^^^^^^^^ + ^^^^^^^^ Reserving 1280k for malloc() at: 8fdc8000 Reserving 24 Bytes for Board Info at: 8fdc7fe8 Reserving 52 Bytes for Global Data at: 8fdc7fb4 @@ -197,6 +197,6 @@ Bank #0: 80000000 256 MiB relocation Offset is: eff08000 mon: 00058BAC gd->monLen: 00061F10 Now running in RAM - U-Boot at: 8ff08000 - ^^^^^^^^ + ^^^^^^^^ Now you can use gdb as usual :-) diff --git a/drivers/fpga/lattice.c b/drivers/fpga/lattice.c index a0e78231024..c3b2355f941 100644 --- a/drivers/fpga/lattice.c +++ b/drivers/fpga/lattice.c @@ -395,5 +395,3 @@ int lattice_info(Lattice_desc *desc) return ret_val; } - - diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 9271470e368..c7f76209f33 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -412,4 +412,3 @@ int omap_mmc_init(int dev_index) return 0; } - diff --git a/drivers/serial/atmel_usart.h b/drivers/serial/atmel_usart.h index 7cfc2d500cb..7e4b2c9c69e 100644 --- a/drivers/serial/atmel_usart.h +++ b/drivers/serial/atmel_usart.h @@ -42,7 +42,7 @@ typedef struct atmel_usart3 { u32 reserved1; u32 ifr; u32 man; - u32 reserved2[54]; // version and PDC not needed + u32 reserved2[54]; /* version and PDC not needed */ } atmel_usart3_t; /* Bitfields in CR */ diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index cf22629b971..f9163a80ed1 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -116,4 +116,3 @@ int usb_gadget_config_buf( cp->bmAttributes |= USB_CONFIG_ATT_ONE; return len; } - diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 7cf3c673ddd..18964894215 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -302,4 +302,3 @@ void usb_ep_autoconfig_reset(struct usb_gadget *gadget) #endif epnum = 0; } - diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index b22ca90fc68..5a18e035b6e 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -1968,4 +1968,3 @@ fail: error("%s failed. error = %d", __func__, status); return status; } - diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 6e9d1bf0f29..95555cf96b9 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -137,4 +137,3 @@ usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf) buf[1] = USB_DT_STRING; return buf[0]; } - diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index 20c119aede1..b5d20bd7b25 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -79,7 +79,7 @@ #define CONFIG_SYS_XLB_PIPELINING 1 #undef CONFIG_NET_MULTI -#undef CONFIG_EEPRO100 +#undef CONFIG_EEPRO100 /* Partitions */ #define CONFIG_MAC_PARTITION diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index 09691d37377..608ab9f41a4 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -11,7 +11,7 @@ /* * Processor Settings */ -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS /* @@ -21,11 +21,11 @@ */ /* CONFIG_CLKIN_HZ is any value in Hz */ #define CONFIG_CLKIN_HZ 16384000 -/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ -/* 1 = CLKIN / 2 */ +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ #define CONFIG_CLKIN_HALF 0 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ -/* 1 = bypass PLL */ +/* 1 = bypass PLL */ #define CONFIG_PLL_BYPASS 0 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ /* Values can range from 0-63 (where 0 means 64) */ @@ -36,7 +36,7 @@ /* SCLK_DIV controls the system clock divider */ /* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 3 -#define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000) +#define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000) /* @@ -111,13 +111,13 @@ * it linked after the configuration sector. */ # define LDS_BOARD_TEXT \ - arch/blackfin/cpu/traps.o (.text .text.*); \ - arch/blackfin/cpu/interrupt.o (.text .text.*); \ - arch/blackfin/cpu/serial.o (.text .text.*); \ - common/dlmalloc.o (.text .text.*); \ - lib/crc32.o (.text .text.*); \ - . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text .text.*); + arch/blackfin/cpu/traps.o (.text .text.*); \ + arch/blackfin/cpu/interrupt.o (.text .text.*); \ + arch/blackfin/cpu/serial.o (.text .text.*); \ + common/dlmalloc.o (.text .text.*); \ + lib/crc32.o (.text .text.*); \ + . = DEFINED(env_offset) ? env_offset : .; \ + common/env_embedded.o (.text .text.*); #endif diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h index 8b2bdc715d6..e4688a27b4a 100644 --- a/include/configs/blackvme.h +++ b/include/configs/blackvme.h @@ -126,9 +126,9 @@ * AX88180 WEN = 5 clocks REN 6 clocks @ SCLK = 100 MHz * One extra clock needed because AX88180 is asynchronous to CPU. */ - /* bank 1 0 */ + /* bank 1 0 */ #define CONFIG_EBIU_AMBCTL0_VAL 0xFFC2FFC2 - /* bank 3 2 */ + /* bank 3 2 */ #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC2FFC2 /* memory layout */ diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 21b7ec7e1b2..166da6ca7fd 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -60,8 +60,6 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - - /* * CS8900 Ethernet drivers */ @@ -79,7 +77,6 @@ #define CONFIG_BAUDRATE 115200 - /* * BOOTP options */ @@ -88,7 +85,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ @@ -98,7 +94,6 @@ #define CONFIG_CMD_REGINFO #define CONFIG_CMD_ELF - #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "root=/dev/msdk mem=48M" #define CONFIG_BOOTFILE "mx1ads" diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h index 0641befeb17..1632ce82ba3 100644 --- a/include/configs/mx1fs2.h +++ b/include/configs/mx1fs2.h @@ -34,7 +34,6 @@ #undef _CONFIG_UART4 /* internal uart 4 */ #undef CONFIG_SILENT_CONSOLE /* use this to disable output */ - /* * BOOTP options */ @@ -43,7 +42,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ @@ -58,7 +56,6 @@ #undef CONFIG_CMD_PING #undef CONFIG_CMD_SOURCE - /* * Boot options. Setting delay to -1 stops autostart count down. */ @@ -98,8 +95,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) - - #define CONFIG_STACKSIZE (120<<10) /* stack size */ #ifdef CONFIG_USE_IRQ diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index c0ae2d9d240..3da214e99dd 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -35,7 +35,6 @@ * Select serial console configuration */ - /* * BOOTP options */ @@ -44,7 +43,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ @@ -58,7 +56,6 @@ #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_SOURCE - /* * Boot options. Setting delay to -1 stops autostart count down. * NOTE: Sending parameters to kernel depends on kernel version and @@ -100,14 +97,11 @@ #define CONFIG_INITRD_TAG 1 /* send initrd params */ #undef CONFIG_VFD /* do not send framebuffer setup */ - /* * Malloc pool need to host env + 128 Kb reserve for other allocations. */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) - - #define CONFIG_STACKSIZE (120<<10) /* stack size */ #ifdef CONFIG_USE_IRQ @@ -133,15 +127,6 @@ #define SCB9328_SDRAM_1 0x08000000 /* SDRAM bank #1 */ #define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */ -/* - * Flash Controller settings - */ - -/* - * Hardware drivers - */ - - /* * Configuration for FLASH memory for the Synertronixx board */ diff --git a/include/lattice.h b/include/lattice.h index 75729b605ab..e965663579e 100755 --- a/include/lattice.h +++ b/include/lattice.h @@ -317,4 +317,3 @@ void writePort(unsigned char pins, unsigned char value); unsigned char readPort(void); void sclock(void); #endif - diff --git a/include/linux/fb.h b/include/linux/fb.h index f4ac4bf90e8..3858f8f80f6 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -26,13 +26,13 @@ struct fb_fix_screeninfo { __u32 type; /* see FB_TYPE_* */ __u32 type_aux; /* Interleave for interleaved Planes */ __u32 visual; /* see FB_VISUAL_* */ - __u16 xpanstep; /* zero if no hardware panning */ - __u16 ypanstep; /* zero if no hardware panning */ - __u16 ywrapstep; /* zero if no hardware ywrap */ - __u32 line_length; /* length of a line in bytes */ - unsigned long mmio_start; /* Start of Memory Mapped I/O */ + __u16 xpanstep; /* zero if no hardware panning */ + __u16 ypanstep; /* zero if no hardware panning */ + __u16 ywrapstep; /* zero if no hardware ywrap */ + __u32 line_length; /* length of a line in bytes */ + unsigned long mmio_start; /* Start of Memory Mapped I/O */ /* (physical address) */ - __u32 mmio_len; /* Length of Memory Mapped I/O */ + __u32 mmio_len; /* Length of Memory Mapped I/O */ __u32 accel; /* Indicate to driver which */ /* specific chip/card we have */ __u16 reserved[3]; /* Reserved for future compatibility */ @@ -56,7 +56,7 @@ struct fb_bitfield { }; -#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */ +#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */ #define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */ #define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/ @@ -64,38 +64,38 @@ struct fb_bitfield { #define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */ #define FB_ACTIVATE_MASK 15 /* values */ -#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */ +#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */ #define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */ #define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */ #define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/ -#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */ +#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */ #define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */ #define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */ #define FB_SYNC_EXT 4 /* external sync */ -#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */ -#define FB_SYNC_BROADCAST 16 /* broadcast video timings */ +#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */ +#define FB_SYNC_BROADCAST 16 /* broadcast video timings */ /* vtotal = 144d/288n/576i => PAL */ /* vtotal = 121d/242n/484i => NTSC */ #define FB_SYNC_ON_GREEN 32 /* sync on green */ -#define FB_VMODE_NONINTERLACED 0 /* non interlaced */ +#define FB_VMODE_NONINTERLACED 0 /* non interlaced */ #define FB_VMODE_INTERLACED 1 /* interlaced */ #define FB_VMODE_DOUBLE 2 /* double scan */ #define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */ #define FB_VMODE_MASK 255 -#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */ +#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */ #define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */ #define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */ /* * Display rotation support */ -#define FB_ROTATE_UR 0 -#define FB_ROTATE_CW 1 -#define FB_ROTATE_UD 2 -#define FB_ROTATE_CCW 3 +#define FB_ROTATE_UR 0 +#define FB_ROTATE_CW 1 +#define FB_ROTATE_UD 2 +#define FB_ROTATE_CCW 3 #define PICOS2KHZ(a) (1000000000UL/(a)) #define KHZ2PICOS(a) (1000000000UL/(a)) @@ -154,10 +154,10 @@ struct fb_con2fbmap { }; /* VESA Blanking Levels */ -#define VESA_NO_BLANKING 0 -#define VESA_VSYNC_SUSPEND 1 -#define VESA_HSYNC_SUSPEND 2 -#define VESA_POWERDOWN 3 +#define VESA_NO_BLANKING 0 +#define VESA_VSYNC_SUSPEND 1 +#define VESA_HSYNC_SUSPEND 2 +#define VESA_POWERDOWN 3 enum { @@ -234,12 +234,12 @@ struct fb_image { */ #define FB_CUR_SETIMAGE 0x01 -#define FB_CUR_SETPOS 0x02 -#define FB_CUR_SETHOT 0x04 -#define FB_CUR_SETCMAP 0x08 +#define FB_CUR_SETPOS 0x02 +#define FB_CUR_SETHOT 0x04 +#define FB_CUR_SETCMAP 0x08 #define FB_CUR_SETSHAPE 0x10 #define FB_CUR_SETSIZE 0x20 -#define FB_CUR_SETALL 0xFF +#define FB_CUR_SETALL 0xFF struct fbcurpos { __u16 x, y; @@ -377,29 +377,29 @@ struct fb_cursor_user { * if you own it */ #define FB_EVENT_RESUME 0x03 -/* An entry from the modelist was removed */ -#define FB_EVENT_MODE_DELETE 0x04 -/* A driver registered itself */ -#define FB_EVENT_FB_REGISTERED 0x05 -/* A driver unregistered itself */ -#define FB_EVENT_FB_UNREGISTERED 0x06 -/* CONSOLE-SPECIFIC: get console to framebuffer mapping */ -#define FB_EVENT_GET_CONSOLE_MAP 0x07 -/* CONSOLE-SPECIFIC: set console to framebuffer mapping */ -#define FB_EVENT_SET_CONSOLE_MAP 0x08 -/* A hardware display blank change occured */ -#define FB_EVENT_BLANK 0x09 -/* Private modelist is to be replaced */ -#define FB_EVENT_NEW_MODELIST 0x0A +/* An entry from the modelist was removed */ +#define FB_EVENT_MODE_DELETE 0x04 +/* A driver registered itself */ +#define FB_EVENT_FB_REGISTERED 0x05 +/* A driver unregistered itself */ +#define FB_EVENT_FB_UNREGISTERED 0x06 +/* CONSOLE-SPECIFIC: get console to framebuffer mapping */ +#define FB_EVENT_GET_CONSOLE_MAP 0x07 +/* CONSOLE-SPECIFIC: set console to framebuffer mapping */ +#define FB_EVENT_SET_CONSOLE_MAP 0x08 +/* A hardware display blank change occured */ +#define FB_EVENT_BLANK 0x09 +/* Private modelist is to be replaced */ +#define FB_EVENT_NEW_MODELIST 0x0A /* The resolution of the passed in fb_info about to change and - all vc's should be changed */ + all vc's should be changed */ #define FB_EVENT_MODE_CHANGE_ALL 0x0B /* A software display blank change occured */ -#define FB_EVENT_CONBLANK 0x0C -/* Get drawing requirements */ -#define FB_EVENT_GET_REQ 0x0D -/* Unbind from the console if possible */ -#define FB_EVENT_FB_UNBIND 0x0E +#define FB_EVENT_CONBLANK 0x0C +/* Get drawing requirements */ +#define FB_EVENT_GET_REQ 0x0D +/* Unbind from the console if possible */ +#define FB_EVENT_FB_UNBIND 0x0E struct fb_event { struct fb_info *info; @@ -421,10 +421,10 @@ struct fb_blit_caps { * format the hardware needs. */ -#define FB_PIXMAP_DEFAULT 1 /* used internally by fbcon */ -#define FB_PIXMAP_SYSTEM 2 /* memory is in system RAM */ -#define FB_PIXMAP_IO 4 /* memory is iomapped */ -#define FB_PIXMAP_SYNC 256 /* set if GPU can DMA */ +#define FB_PIXMAP_DEFAULT 1 /* used internally by fbcon */ +#define FB_PIXMAP_SYSTEM 2 /* memory is in system RAM */ +#define FB_PIXMAP_IO 4 /* memory is iomapped */ +#define FB_PIXMAP_SYNC 256 /* set if GPU can DMA */ struct fb_pixmap { u8 *addr; /* pointer to memory */ @@ -434,10 +434,10 @@ struct fb_pixmap { u32 scan_align; /* alignment per scanline */ u32 access_align; /* alignment per read/write (bits) */ u32 flags; /* see FB_PIXMAP_* */ - u32 blit_x; /* supported bit block dimensions (1-32)*/ - u32 blit_y; /* Format: blit_x = 1 << (width - 1) */ - /* blit_y = 1 << (height - 1) */ - /* if 0, will be set to 0xffffffff (all)*/ + u32 blit_x; /* supported bit block dimensions (1-32)*/ + u32 blit_y; /* Format: blit_x = 1 << (width - 1) */ + /* blit_y = 1 << (height - 1) */ + /* if 0, will be set to 0xffffffff (all)*/ /* access methods */ void (*writeio)(struct fb_info *info, void *dst, void *src, unsigned int size); void (*readio) (struct fb_info *info, void *dst, void *src, unsigned int size); @@ -488,7 +488,7 @@ struct fb_deferred_io { * meaning, it is set by the fb subsystem depending FOREIGN_ENDIAN flag * and host endianness. Drivers should not use this flag. */ -#define FBINFO_BE_MATH 0x100000 +#define FBINFO_BE_MATH 0x100000 struct fb_info { int node; @@ -499,7 +499,7 @@ struct fb_info { struct fb_pixmap pixmap; /* Image hardware mapper */ struct fb_pixmap sprite; /* Cursor hardware mapper */ struct fb_cmap cmap; /* Current cmap */ - struct list_head modelist; /* mode list */ + struct list_head modelist; /* mode list */ struct fb_videomode *mode; /* current mode */ char *screen_base; /* Virtual address */ @@ -508,7 +508,7 @@ struct fb_info { #define FBINFO_STATE_RUNNING 0 #define FBINFO_STATE_SUSPENDED 1 u32 state; /* Hardware state i.e suspend */ - void *fbcon_par; /* fbcon use-only private area */ + void *fbcon_par; /* fbcon use-only private area */ /* From here on everything is device dependent */ void *par; }; @@ -518,14 +518,14 @@ struct fb_info { #define FBINFO_FLAG_MODULE FBINFO_MODULE #define FBINFO_FLAG_DEFAULT FBINFO_DEFAULT -// This will go away +/* This will go away */ #if defined(__sparc__) /* We map all of our framebuffers such that big-endian accesses * are what we want, so the following is sufficient. */ -// This will go away +/* This will go away */ #define fb_readb sbus_readb #define fb_readw sbus_readw #define fb_readl sbus_readl @@ -562,7 +562,7 @@ struct fb_info { #endif -#define FB_LEFT_POS(p, bpp) (fb_be_math(p) ? (32 - (bpp)) : 0) +#define FB_LEFT_POS(p, bpp) (fb_be_math(p) ? (32 - (bpp)) : 0) #define FB_SHIFT_HIGH(p, val, bits) (fb_be_math(p) ? (val) >> (bits) : \ (val) << (bits)) #define FB_SHIFT_LOW(p, val, bits) (fb_be_math(p) ? (val) << (bits) : \ @@ -580,7 +580,7 @@ struct fb_info { #define FB_MODE_IS_VESA 4 #define FB_MODE_IS_CALCULATED 8 #define FB_MODE_IS_FIRST 16 -#define FB_MODE_IS_FROM_VAR 32 +#define FB_MODE_IS_FROM_VAR 32 /* drivers/video/fbcmap.c */ diff --git a/include/linux/kbuild.h b/include/linux/kbuild.h index be763842c0b..ab7805a3b44 100644 --- a/include/linux/kbuild.h +++ b/include/linux/kbuild.h @@ -7,7 +7,7 @@ #define __LINUX_KBUILD_H #define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) #define BLANK() asm volatile("\n->" : : ) diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 03541cbf219..29672842749 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -9,8 +9,6 @@ * Remy Bohmer */ - - #define USB_CDC_SUBCLASS_ACM 0x02 #define USB_CDC_SUBCLASS_ETHERNET 0x06 #define USB_CDC_SUBCLASS_WHCM 0x08 @@ -199,7 +197,6 @@ struct usb_cdc_line_coding { #define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3) #define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ - /*-------------------------------------------------------------------------*/ /* @@ -221,4 +218,3 @@ struct usb_cdc_notification { __le16 wIndex; __le16 wLength; } __attribute__ ((packed)); - diff --git a/lib/hashtable.c b/lib/hashtable.c index 57802cfb6de..7ac3dddda69 100644 --- a/lib/hashtable.c +++ b/lib/hashtable.c @@ -56,7 +56,7 @@ /* * [Aho,Sethi,Ullman] Compilers: Principles, Techniques and Tools, 1986 - * [Knuth] The Art of Computer Programming, part 3 (6.4) + * [Knuth] The Art of Computer Programming, part 3 (6.4) */ /* @@ -252,7 +252,7 @@ int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval, if (htab->table[idx].used) { /* - * Further action might be required according to the + * Further action might be required according to the * action value. */ unsigned hval2; @@ -283,8 +283,8 @@ int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval, do { /* - * Because SIZE is prime this guarantees to - * step through all available indices. + * Because SIZE is prime this guarantees to + * step through all available indices. */ if (idx <= hval2) idx = htab->size + idx - hval2; @@ -323,8 +323,8 @@ int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval, /* An empty bucket has been found. */ if (action == ENTER) { /* - * If table is full and another entry should be - * entered return with error. + * If table is full and another entry should be + * entered return with error. */ if (htab->filled == htab->size) { __set_errno(ENOMEM); diff --git a/lib/qsort.c b/lib/qsort.c index bb47319f8ba..e771dcfcf27 100644 --- a/lib/qsort.c +++ b/lib/qsort.c @@ -23,9 +23,9 @@ #endif void qsort(void *base, - size_t nel, - size_t width, - int (*comp)(const void *, const void *)) + size_t nel, + size_t width, + int (*comp)(const void *, const void *)) { size_t wgap, i, j, k; char tmp; diff --git a/post/board/lwmon5/fpga.c b/post/board/lwmon5/fpga.c index 30675484839..501369b6a1c 100644 --- a/post/board/lwmon5/fpga.c +++ b/post/board/lwmon5/fpga.c @@ -227,8 +227,6 @@ static int fpga_mem_test(void) return ret; } - - /* Verify FPGA addresslines */ static int fpga_post_addrline(ulong *address, ulong *base, ulong size) { From 908614f20f7f0f5df736eed21b88e81ebbf14e86 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 27 Oct 2010 22:49:13 +0200 Subject: [PATCH 099/116] Prepare v2010.12-rc1 Signed-off-by: Wolfgang Denk --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 5c83b07da59..b1876117403 100644 --- a/Makefile +++ b/Makefile @@ -22,9 +22,9 @@ # VERSION = 2010 -PATCHLEVEL = 09 +PATCHLEVEL = 12 SUBLEVEL = -EXTRAVERSION = +EXTRAVERSION = -rc1 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else From 9b8081a4525b3b2b655ba71fdeea1cb265d413e8 Mon Sep 17 00:00:00 2001 From: Mikhail Kshevetskiy Date: Thu, 28 Oct 2010 01:47:24 +0400 Subject: [PATCH 100/116] arm/pxa: remove unused arch-pxa/macro.h Signed-off-by: Mikhail Kshevetskiy --- arch/arm/cpu/pxa/start.S | 1 - arch/arm/include/asm/arch-pxa/macro.h | 328 ---------------------- onenand_ipl/board/vpac270/Makefile | 5 - onenand_ipl/board/vpac270/lowlevel_init.S | 34 --- 4 files changed, 368 deletions(-) delete mode 100644 arch/arm/include/asm/arch-pxa/macro.h delete mode 100644 onenand_ipl/board/vpac270/lowlevel_init.S diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index bf8510eb768..f15a43ab9ed 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -33,7 +33,6 @@ #include #include #include -#include /* takes care the CP15 update has taken place */ .macro CPWAIT reg diff --git a/arch/arm/include/asm/arch-pxa/macro.h b/arch/arm/include/asm/arch-pxa/macro.h deleted file mode 100644 index 85958dd32d5..00000000000 --- a/arch/arm/include/asm/arch-pxa/macro.h +++ /dev/null @@ -1,328 +0,0 @@ -/* - * arch/arm/include/asm/arch-pxa/macro.h - * - * Copyright (C) 2010 Marek Vasut - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_PXA_MACRO_H__ -#define __ASM_ARCH_PXA_MACRO_H__ -#ifdef __ASSEMBLY__ - -#include -#include - -/* - * This macro performs a 32bit write to a memory location and makes sure the - * write operation really happened by performing a read back. - * - * Clobbered regs: r4, r5 - */ -.macro write32rb addr, data - ldr r4, =\addr - ldr r5, =\data - str r5, [r4] - ldr r5, [r4] -.endm - -/* - * This macro waits according to OSCR incrementation - * - * Clobbered regs: r4, r5, r6 - */ -.macro pxa_wait_ticks ticks - ldr r4, =OSCR - mov r5, #0 - str r5, [r4] - ldr r5, =\ticks -1: - ldr r6, [r4] - cmp r5, r6 - bgt 1b -.endm - -/* - * This macro sets up the GPIO pins of the PXA2xx/PXA3xx CPU - * - * Clobbered regs: r4, r5 - */ -.macro pxa_gpio_setup - write32 GPSR0, CONFIG_SYS_GPSR0_VAL - write32 GPSR1, CONFIG_SYS_GPSR1_VAL - write32 GPSR2, CONFIG_SYS_GPSR2_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GPSR3, CONFIG_SYS_GPSR3_VAL -#endif - - write32 GPCR0, CONFIG_SYS_GPCR0_VAL - write32 GPCR1, CONFIG_SYS_GPCR1_VAL - write32 GPCR2, CONFIG_SYS_GPCR2_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GPCR3, CONFIG_SYS_GPCR3_VAL -#endif - - write32 GPDR0, CONFIG_SYS_GPDR0_VAL - write32 GPDR1, CONFIG_SYS_GPDR1_VAL - write32 GPDR2, CONFIG_SYS_GPDR2_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GPDR3, CONFIG_SYS_GPDR3_VAL -#endif - - write32 GAFR0_L, CONFIG_SYS_GAFR0_L_VAL - write32 GAFR0_U, CONFIG_SYS_GAFR0_U_VAL - write32 GAFR1_L, CONFIG_SYS_GAFR1_L_VAL - write32 GAFR1_U, CONFIG_SYS_GAFR1_U_VAL - write32 GAFR2_L, CONFIG_SYS_GAFR2_L_VAL - write32 GAFR2_U, CONFIG_SYS_GAFR2_U_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GAFR3_L, CONFIG_SYS_GAFR3_L_VAL - write32 GAFR3_U, CONFIG_SYS_GAFR3_U_VAL -#endif - - write32 PSSR, CONFIG_SYS_PSSR_VAL -.endm - -/* - * This macro sets up the Memory controller of the PXA2xx CPU - * - * WARNING: This macro uses internally r3 and r7 regs for MEMC_BASE - * and CONFIG_SYS_MDREFR_VAL correspondingly. Please do not - * use this regs for other purpose inside this macro. - * - * Clobbered regs: r3, r4, r5, r6, r7 - */ -.macro pxa_mem_setup - /* This comes handy when setting MDREFR */ - ldr r3, =MEMC_BASE - - /* - * 1) Initialize Asynchronous static memory controller - */ - - /* MSC0: nCS(0,1) */ - write32rb (MEMC_BASE + MSC0_OFFSET), CONFIG_SYS_MSC0_VAL - /* MSC1: nCS(2,3) */ - write32rb (MEMC_BASE + MSC1_OFFSET), CONFIG_SYS_MSC1_VAL - /* MSC2: nCS(4,5) */ - write32rb (MEMC_BASE + MSC2_OFFSET), CONFIG_SYS_MSC2_VAL - - /* - * 2) Initialize Card Interface - */ - - /* MECR: Memory Expansion Card Register */ - write32rb (MEMC_BASE + MECR_OFFSET), CONFIG_SYS_MECR_VAL - /* MCMEM0: Card Interface slot 0 timing */ - write32rb (MEMC_BASE + MCMEM0_OFFSET), CONFIG_SYS_MCMEM0_VAL - /* MCMEM1: Card Interface slot 1 timing */ - write32rb (MEMC_BASE + MCMEM1_OFFSET), CONFIG_SYS_MCMEM1_VAL - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - write32rb (MEMC_BASE + MCATT0_OFFSET), CONFIG_SYS_MCATT0_VAL - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - write32rb (MEMC_BASE + MCATT1_OFFSET), CONFIG_SYS_MCATT1_VAL - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - write32rb (MEMC_BASE + MCIO0_OFFSET), CONFIG_SYS_MCIO0_VAL - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - write32rb (MEMC_BASE + MCIO1_OFFSET), CONFIG_SYS_MCIO1_VAL - - /* - * 3) Configure Fly-By DMA register - */ - - write32rb (MEMC_BASE + FLYCNFG_OFFSET), CONFIG_SYS_FLYCNFG_VAL - - /* - * 4) Initialize Timing for Sync Memory (SDCLK0) - */ - - /* - * Before accessing MDREFR we need a valid DRI field, so we set - * this to power on defaults + DRI field. - */ - ldr r5, [r3, #MDREFR_OFFSET] - bic r5, r5, #0x0ff - bic r5, r5, #0xf00 /* MDREFR user config with zeroed DRI */ - - ldr r4, =CONFIG_SYS_MDREFR_VAL - mov r7, r4 - lsl r4, #20 - lsr r4, #20 /* Get a valid DRI field */ - - orr r5, r5, r4 /* MDREFR user config with correct DRI */ - - orr r5, #MDREFR_K0RUN - orr r5, #MDREFR_SLFRSH - bic r5, #MDREFR_APD - bic r5, #MDREFR_E1PIN - - str r5, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] - - /* - * 5) Initialize Synchronous Static Memory (Flash/Peripherals) - */ - - /* Initialize SXCNFG register. Assert the enable bits. - * - * Write SXMRS to cause an MRS command to all enabled banks of - * synchronous static memory. Note that SXLCR need not be written - * at this time. - */ - write32rb (MEMC_BASE + SXCNFG_OFFSET), CONFIG_SYS_SXCNFG_VAL - - /* - * 6) Initialize SDRAM - */ - - bic r7, #MDREFR_SLFRSH - str r7, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] - - orr r7, #MDREFR_E1PIN - str r7, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] - - /* - * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure - * but not enable each SDRAM partition pair. - */ - - /* Fetch platform value of MDCNFG */ - ldr r4, =CONFIG_SYS_MDCNFG_VAL - /* Disable all sdram banks */ - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) - /* Write initial value of MDCNFG, w/o enabling sdram banks */ - str r4, [r3, #MDCNFG_OFFSET] - ldr r4, [r3, #MDCNFG_OFFSET] - - /* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */ - pxa_wait_ticks 0x300 - - /* - * 8) Trigger a number (usually 8) refresh cycles by attempting - * non-burst read or write accesses to disabled SDRAM, as commonly - * specified in the power up sequence documented in SDRAM data - * sheets. The address(es) used for this purpose must not be - * cacheable. - */ - - ldr r4, =CONFIG_SYS_DRAM_BASE -.rept 9 - str r5, [r4] -.endr - - /* - * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1). - */ - - ldr r5, =CONFIG_SYS_MDCNFG_VAL - ldr r4, =(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3) - and r5, r5, r4 - ldr r4, [r3, #MDCNFG_OFFSET] - orr r4, r4, r5 - str r4, [r3, #MDCNFG_OFFSET] - ldr r4, [r3, #MDCNFG_OFFSET] - - /* - * 10) Write MDMRS. - */ - - ldr r4, =CONFIG_SYS_MDMRS_VAL - str r4, [r3, #MDMRS_OFFSET] - ldr r4, [r3, #MDMRS_OFFSET] - - /* - * 11) Enable APD - */ - - ldr r4, [r3, #MDREFR_OFFSET] - and r7, r7, #MDREFR_APD - orr r4, r4, r7 - str r4, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] -.endm - -/* - * This macro tests if the CPU woke up from sleep and eventually resumes - * - * Clobbered regs: r4, r5 - */ -.macro pxa_wakeup - ldr r4, =RCSR - ldr r5, [r4] - and r5, r5, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR) - str r5, [r4] - teq r5, #RCSR_SMR - - bne pxa_wakeup_exit - - ldr r4, =PSSR - mov r5, #PSSR_PH - str r5, [r4] - - ldr r4, =PSPR - ldr pc, [r4] -pxa_wakeup_exit: -.endm - -/* - * This macro disables all interupts on PXA2xx/PXA3xx CPU - * - * Clobbered regs: r4, r5 - */ -.macro pxa_intr_setup - write32 ICLR, 0 - write32 ICMR, 0 -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 ICLR2, 0 - write32 ICMR2, 0 -#endif -.endm - -/* - * This macro configures clock on PXA2xx/PXA3xx CPU - * - * Clobbered regs: r4, r5 - */ -.macro pxa_clock_setup - /* Disable the peripheral clocks, and set the core clock frequency */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - write32 CKEN, CONFIG_SYS_CKEN - - /* Write CCCR */ - write32 CCCR, CONFIG_SYS_CCCR - -#ifdef CONFIG_RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - write32 OSCC, #OSCC_OON - ldr r4, =OSCC - - /* Spin here until OSCC.OOK get set, meaning the PLL has settled. */ -2: - ldr r5, [r4] - ands r5, r5, #1 - beq 2b -#endif -.endm - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_PXA_MACRO_H__ */ diff --git a/onenand_ipl/board/vpac270/Makefile b/onenand_ipl/board/vpac270/Makefile index a86bc00864c..7300692b772 100644 --- a/onenand_ipl/board/vpac270/Makefile +++ b/onenand_ipl/board/vpac270/Makefile @@ -8,7 +8,6 @@ AFLAGS += -DCONFIG_PRELOADER -DCONFIG_ONENAND_IPL CFLAGS += -DCONFIG_PRELOADER -DCONFIG_ONENAND_IPL OBJCFLAGS += --gap-fill=0x00 -SOBJS := lowlevel_init.o SOBJS += start.o COBJS := vpac270.o COBJS += onenand_read.o @@ -62,10 +61,6 @@ ifneq ($(OBJTREE), $(SRCTREE)) $(obj)vpac270.c: @rm -f $@ ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/vpac270.c $@ - -$(obj)lowlevel_init.S: - @rm -f $@ - ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/lowlevel_init.S $@ endif ######################################################################### diff --git a/onenand_ipl/board/vpac270/lowlevel_init.S b/onenand_ipl/board/vpac270/lowlevel_init.S deleted file mode 100644 index e79d8dd1aba..00000000000 --- a/onenand_ipl/board/vpac270/lowlevel_init.S +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Voipac PXA270 Lowlevel Hardware Initialization - * - * Copyright (C) 2010 Marek Vasut - * - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -.globl lowlevel_init -lowlevel_init: - pxa_clock_setup - mov pc, lr From 1fde3eb2d3f9a46c1dbd2e936ba6e4e6a82add3f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 27 Oct 2010 21:10:58 -0400 Subject: [PATCH 101/116] Blackfin: fix building after asm-offsets.h intro Since some of the defines in our config.h use the generated defines, we need to include the generated header. This fixes building of the Blackfin start.S file (where the stack is setup). Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/config.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h index 34ca68c9d54..ae61402266b 100644 --- a/arch/blackfin/include/asm/config.h +++ b/arch/blackfin/include/asm/config.h @@ -9,6 +9,9 @@ #ifndef __ASM_BLACKFIN_CONFIG_POST_H__ #define __ASM_BLACKFIN_CONFIG_POST_H__ +/* Some of our defines use this (like CONFIG_SYS_GBL_DATA_ADDR) */ +#include + #ifndef CONFIG_BFIN_SCRATCH_REG # define CONFIG_BFIN_SCRATCH_REG retn #endif From 73520939b41d90c0925d5ea4abaa670b7fce2285 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 19 Oct 2010 02:48:34 -0400 Subject: [PATCH 102/116] Blackfin: config.mk: drop manual stripping of config vars Now that the common code takes care of stripping away quotes and such from numeric options, we no longer need to do so ourselves. So drop the custom code we have in the Blackfin config.mk. Signed-off-by: Mike Frysinger --- arch/blackfin/config.mk | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/blackfin/config.mk b/arch/blackfin/config.mk index a3300841a0c..ab117ca5ad5 100644 --- a/arch/blackfin/config.mk +++ b/arch/blackfin/config.mk @@ -26,8 +26,6 @@ CROSS_COMPILE ?= bfin-uclinux- STANDALONE_LOAD_ADDR = 0x1000 -m elf32bfin CONFIG_BFIN_BOOT_MODE := $(strip $(subst ",,$(CONFIG_BFIN_BOOT_MODE))) -CONFIG_ENV_OFFSET := $(strip $(subst ",,$(CONFIG_ENV_OFFSET))) -CONFIG_ENV_SIZE := $(strip $(subst ",,$(CONFIG_ENV_SIZE))) PLATFORM_RELFLAGS += -ffixed-P3 -fomit-frame-pointer -mno-fdpic PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN From d9abba8254c3e6b9a1d5c2e52c2d8088bbeb520f Mon Sep 17 00:00:00 2001 From: C Nauman Date: Tue, 26 Oct 2010 23:04:31 +0900 Subject: [PATCH 103/116] Add generic support for samsung s3c2440 This patch adds generic support for the Samsung s3c2440 processor. Global s3c24x0 changes to struct members converting from upper case to lower case. Signed-off-by: Craig Nauman Cc: kevin.morfitt@fearnside-systems.co.uk Signed-off-by: Minkyu Kang --- arch/arm/cpu/arm920t/s3c24x0/speed.c | 30 +- arch/arm/cpu/arm920t/s3c24x0/timer.c | 23 +- arch/arm/cpu/arm920t/s3c24x0/usb.c | 10 +- arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c | 12 +- arch/arm/include/asm/arch-s3c24x0/s3c2440.h | 161 +++++ arch/arm/include/asm/arch-s3c24x0/s3c24x0.h | 672 ++++++++++-------- .../include/asm/arch-s3c24x0/s3c24x0_cpu.h | 2 + board/mpl/vcma9/vcma9.c | 41 +- board/samsung/smdk2400/smdk2400.c | 28 +- board/samsung/smdk2410/smdk2410.c | 36 +- board/sbc2410x/sbc2410x.c | 42 +- board/trab/cmd_trab.c | 28 +- board/trab/rs485.c | 40 +- board/trab/trab.c | 67 +- board/trab/trab_fkt.c | 142 ++-- board/trab/tsc2000.c | 39 +- board/trab/tsc2000.h | 68 +- board/trab/vfd.c | 90 +-- drivers/i2c/s3c24x0_i2c.c | 102 +-- drivers/mtd/nand/s3c2410_nand.c | 25 +- drivers/rtc/s3c24x0_rtc.c | 52 +- drivers/serial/serial_s3c24x0.c | 26 +- 22 files changed, 1006 insertions(+), 730 deletions(-) create mode 100644 arch/arm/include/asm/arch-s3c24x0/s3c2440.h diff --git a/arch/arm/cpu/arm920t/s3c24x0/speed.c b/arch/arm/cpu/arm920t/s3c24x0/speed.c index b13283a798e..3ae558dd628 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/speed.c +++ b/arch/arm/cpu/arm920t/s3c24x0/speed.c @@ -54,9 +54,9 @@ static ulong get_PLLCLK(int pllreg) ulong r, m, p, s; if (pllreg == MPLL) - r = readl(&clk_power->MPLLCON); + r = readl(&clk_power->mpllcon); else if (pllreg == UPLL) - r = readl(&clk_power->UPLLCON); + r = readl(&clk_power->upllcon); else hang(); @@ -64,7 +64,12 @@ static ulong get_PLLCLK(int pllreg) p = ((r & 0x003F0) >> 4) + 2; s = r & 0x3; +#if defined(CONFIG_S3C2440) + if (pllreg == MPLL) + return 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s)); +#endif return (CONFIG_SYS_CLK_FREQ * m) / (p << s); + } /* return FCLK frequency */ @@ -77,8 +82,23 @@ ulong get_FCLK(void) ulong get_HCLK(void) { struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - - return (readl(&clk_power->CLKDIVN) & 2) ? get_FCLK() / 2 : get_FCLK(); +#ifdef CONFIG_S3C2440 + switch (readl(&clk_power->clkdivn) & 0x6) { + default: + case 0: + return get_FCLK(); + case 2: + return get_FCLK() / 2; + case 4: + return (readl(&clk_power->camdivn) & (1 << 9)) ? + get_FCLK() / 8 : get_FCLK() / 4; + case 6: + return (readl(&clk_power->camdivn) & (1 << 8)) ? + get_FCLK() / 6 : get_FCLK() / 3; + } +#else + return (readl(&clk_power->clkdivn) & 2) ? get_FCLK() / 2 : get_FCLK(); +#endif } /* return PCLK frequency */ @@ -86,7 +106,7 @@ ulong get_PCLK(void) { struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - return (readl(&clk_power->CLKDIVN) & 1) ? get_HCLK() / 2 : get_HCLK(); + return (readl(&clk_power->clkdivn) & 1) ? get_HCLK() / 2 : get_HCLK(); } /* return UCLK frequency */ diff --git a/arch/arm/cpu/arm920t/s3c24x0/timer.c b/arch/arm/cpu/arm920t/s3c24x0/timer.c index 7d47354381c..8cf9ff6be00 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/timer.c +++ b/arch/arm/cpu/arm920t/s3c24x0/timer.c @@ -43,7 +43,7 @@ static inline ulong READ_TIMER(void) { struct s3c24x0_timers *timers = s3c24x0_get_base_timers(); - return readl(&timers->TCNTO4) & 0xffff; + return readl(&timers->tcnto4) & 0xffff; } static ulong timestamp; @@ -56,7 +56,7 @@ int timer_init(void) /* use PWM Timer 4 because it has no output */ /* prescaler for Timer 4 is 16 */ - writel(0x0f00, &timers->TCFG0); + writel(0x0f00, &timers->tcfg0); if (timer_load_val == 0) { /* * for 10 ms clock period @ PCLK with 4 bit divider = 1/2 @@ -68,13 +68,13 @@ int timer_init(void) } /* load value for 10 ms timeout */ lastdec = timer_load_val; - writel(timer_load_val, &timers->TCNTB4); - /* auto load, manual update of Timer 4 */ - tmr = (readl(&timers->TCON) & ~0x0700000) | 0x0600000; - writel(tmr, &timers->TCON); - /* auto load, start Timer 4 */ + writel(timer_load_val, &timers->tcntb4); + /* auto load, manual update of timer 4 */ + tmr = (readl(&timers->tcon) & ~0x0700000) | 0x0600000; + writel(tmr, &timers->tcon); + /* auto load, start timer 4 */ tmr = (tmr & ~0x0700000) | 0x0500000; - writel(tmr, &timers->TCON); + writel(tmr, &timers->tcon); timestamp = 0; return (0); @@ -181,6 +181,7 @@ ulong get_tbclk(void) tbclk = timer_load_val * 100; #elif defined(CONFIG_SBC2410X) || \ defined(CONFIG_SMDK2410) || \ + defined(CONFIG_S3C2440) || \ defined(CONFIG_VCMA9) tbclk = CONFIG_SYS_HZ; #else @@ -206,13 +207,13 @@ void reset_cpu(ulong ignored) watchdog = s3c24x0_get_base_watchdog(); /* Disable watchdog */ - writel(0x0000, &watchdog->WTCON); + writel(0x0000, &watchdog->wtcon); /* Initialize watchdog timer count register */ - writel(0x0001, &watchdog->WTCNT); + writel(0x0001, &watchdog->wtcnt); /* Enable watchdog timer; assert reset at timer timeout */ - writel(0x0021, &watchdog->WTCON); + writel(0x0021, &watchdog->wtcon); while (1) /* loop forever and wait for reset to happen */; diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb.c b/arch/arm/cpu/arm920t/s3c24x0/usb.c index e468ed08fc4..226a3f6c90c 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/usb.c +++ b/arch/arm/cpu/arm920t/s3c24x0/usb.c @@ -39,14 +39,14 @@ int usb_cpu_init(void) * Set the 48 MHz UPLL clocking. Values are taken from * "PLL value selection guide", 6-23, s3c2400_UM.pdf. */ - writel((40 << 12) + (1 << 4) + 2, &clk_power->UPLLCON); + writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon); /* 1 = use pads related USB for USB host */ - writel(readl(&gpio->MISCCR) | 0x8, &gpio->MISCCR); + writel(readl(&gpio->misccr) | 0x8, &gpio->misccr); /* * Enable USB host clock. */ - writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON); + writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon); return 0; } @@ -55,14 +55,14 @@ int usb_cpu_stop(void) { struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); /* may not want to do this */ - writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON); + writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon); return 0; } int usb_cpu_init_fail(void) { struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON); + writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon); return 0; } diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c index 5aa8d64a55c..ccc97384f33 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c +++ b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c @@ -1666,13 +1666,13 @@ int usb_lowlevel_init(void) * Set the 48 MHz UPLL clocking. Values are taken from * "PLL value selection guide", 6-23, s3c2400_UM.pdf. */ - clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2); - gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */ + clk_power->upllcon = ((40 << 12) + (1 << 4) + 2); + gpio->misccr |= 0x8; /* 1 = use pads related USB for USB host */ /* * Enable USB host clock. */ - clk_power->CLKCON |= (1 << 4); + clk_power->clkcon |= (1 << 4); memset(&gohci, 0, sizeof(struct ohci)); memset(&urb_priv, 0, sizeof(struct urb_priv)); @@ -1709,7 +1709,7 @@ int usb_lowlevel_init(void) if (hc_reset(&gohci) < 0) { hc_release_ohci(&gohci); /* Initialization failed */ - clk_power->CLKCON &= ~(1 << 4); + clk_power->clkcon &= ~(1 << 4); return -1; } @@ -1722,7 +1722,7 @@ int usb_lowlevel_init(void) err("can't start usb-%s", gohci.slot_name); hc_release_ohci(&gohci); /* Initialization failed */ - clk_power->CLKCON &= ~(1 << 4); + clk_power->clkcon &= ~(1 << 4); return -1; } #ifdef DEBUG @@ -1748,7 +1748,7 @@ int usb_lowlevel_stop(void) /* call hc_release_ohci() here ? */ hc_reset(&gohci); /* may not want to do this */ - clk_power->CLKCON &= ~(1 << 4); + clk_power->clkcon &= ~(1 << 4); return 0; } diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c2440.h b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h new file mode 100644 index 00000000000..8c606e3995a --- /dev/null +++ b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h @@ -0,0 +1,161 @@ +/* + * (C) Copyright 2003 + * David Mueller ELSOFT AG Switzerland. d.mueller@elsoft.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************ + * NAME : s3c2440.h + * Version : 31.3.2003 + * + * Based on S3C2440 User's manual Rev x.x + ************************************************/ + +#ifndef __S3C2440_H__ +#define __S3C2440_H__ + +#define S3C24X0_UART_CHANNELS 3 +#define S3C24X0_SPI_CHANNELS 2 + +/* S3C2440 only supports 512 Byte HW ECC */ +#define S3C2440_ECCSIZE 512 +#define S3C2440_ECCBYTES 3 + +enum s3c24x0_uarts_nr { + S3C24X0_UART0, + S3C24X0_UART1, + S3C24X0_UART2 +}; + +/* S3C2440 device base addresses */ +#define S3C24X0_MEMCTL_BASE 0x48000000 +#define S3C24X0_USB_HOST_BASE 0x49000000 +#define S3C24X0_INTERRUPT_BASE 0x4A000000 +#define S3C24X0_DMA_BASE 0x4B000000 +#define S3C24X0_CLOCK_POWER_BASE 0x4C000000 +#define S3C24X0_LCD_BASE 0x4D000000 +#define S3C2440_NAND_BASE 0x4E000000 +#define S3C24X0_UART_BASE 0x50000000 +#define S3C24X0_TIMER_BASE 0x51000000 +#define S3C24X0_USB_DEVICE_BASE 0x52000140 +#define S3C24X0_WATCHDOG_BASE 0x53000000 +#define S3C24X0_I2C_BASE 0x54000000 +#define S3C24X0_I2S_BASE 0x55000000 +#define S3C24X0_GPIO_BASE 0x56000000 +#define S3C24X0_RTC_BASE 0x57000000 +#define S3C2440_ADC_BASE 0x58000000 +#define S3C24X0_SPI_BASE 0x59000000 +#define S3C2440_SDI_BASE 0x5A000000 + +/* include common stuff */ +#include + +static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void) +{ + return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE; +} + +static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void) +{ + return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE; +} + +static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void) +{ + return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE; +} + +static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void) +{ + return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE; +} + +static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void) +{ + return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE; +} + +static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) +{ + return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; +} + +static inline struct s3c2440_nand *s3c2440_get_base_nand(void) +{ + return (struct s3c2440_nand *)S3C2440_NAND_BASE; +} + +static inline struct s3c24x0_uart + *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n) +{ + return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000)); +} + +static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void) +{ + return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE; +} + +static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void) +{ + return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE; +} + +static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void) +{ + return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE; +} + +static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void) +{ + return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE; +} + +static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void) +{ + return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE; +} + +static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void) +{ + return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE; +} + +static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void) +{ + return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE; +} + +static inline struct s3c2440_adc *s3c2440_get_base_adc(void) +{ + return (struct s3c2440_adc *)S3C2440_ADC_BASE; +} + +static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void) +{ + return (struct s3c24x0_spi *)S3C24X0_SPI_BASE; +} + +static inline struct s3c2440_sdi *s3c2440_get_base_sdi(void) +{ + return (struct s3c2440_sdi *)S3C2440_SDI_BASE; +} + +#endif /*__S3C2440_H__*/ diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h index 15f53dd35be..f634d112964 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h @@ -33,12 +33,12 @@ /* Memory controller (see manual chapter 5) */ struct s3c24x0_memctl { - u32 BWSCON; - u32 BANKCON[8]; - u32 REFRESH; - u32 BANKSIZE; - u32 MRSRB6; - u32 MRSRB7; + u32 bwscon; + u32 bankcon[8]; + u32 refresh; + u32 banksize; + u32 mrsrb6; + u32 mrsrb7; }; @@ -72,40 +72,38 @@ struct s3c24x0_usb_host { /* INTERRUPT (see manual chapter 14) */ struct s3c24x0_interrupt { - u32 SRCPND; - u32 INTMOD; - u32 INTMSK; - u32 PRIORITY; - u32 INTPND; - u32 INTOFFSET; -#ifdef CONFIG_S3C2410 - u32 SUBSRCPND; - u32 INTSUBMSK; + u32 srcpnd; + u32 intmod; + u32 intmsk; + u32 priority; + u32 intpnd; + u32 intoffset; +#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + u32 subsrcpnd; + u32 intsubmsk; #endif }; /* DMAS (see manual chapter 8) */ struct s3c24x0_dma { - u32 DISRC; -#ifdef CONFIG_S3C2410 - u32 DISRCC; + u32 disrc; +#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + u32 disrcc; #endif - u32 DIDST; -#ifdef CONFIG_S3C2410 - u32 DIDSTC; + u32 didst; +#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + u32 didstc; #endif - u32 DCON; - u32 DSTAT; - u32 DCSRC; - u32 DCDST; - u32 DMASKTRIG; -#ifdef CONFIG_S3C2400 + u32 dcon; + u32 dstat; + u32 dcsrc; + u32 dcdst; + u32 dmasktrig; +#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) \ + || defined(CONFIG_S3C2440) u32 res[1]; #endif -#ifdef CONFIG_S3C2410 - u32 res[7]; -#endif }; struct s3c24x0_dmas { @@ -116,90 +114,111 @@ struct s3c24x0_dmas { /* CLOCK & POWER MANAGEMENT (see S3C2400 manual chapter 6) */ /* (see S3C2410 manual chapter 7) */ struct s3c24x0_clock_power { - u32 LOCKTIME; - u32 MPLLCON; - u32 UPLLCON; - u32 CLKCON; - u32 CLKSLOW; - u32 CLKDIVN; + u32 locktime; + u32 mpllcon; + u32 upllcon; + u32 clkcon; + u32 clkslow; + u32 clkdivn; +#if defined(CONFIG_S3C2440) + u32 camdivn; +#endif }; /* LCD CONTROLLER (see manual chapter 15) */ struct s3c24x0_lcd { - u32 LCDCON1; - u32 LCDCON2; - u32 LCDCON3; - u32 LCDCON4; - u32 LCDCON5; - u32 LCDSADDR1; - u32 LCDSADDR2; - u32 LCDSADDR3; - u32 REDLUT; - u32 GREENLUT; - u32 BLUELUT; + u32 lcdcon1; + u32 lcdcon2; + u32 lcdcon3; + u32 lcdcon4; + u32 lcdcon5; + u32 lcdsaddr1; + u32 lcdsaddr2; + u32 lcdsaddr3; + u32 redlut; + u32 greenlut; + u32 bluelut; u32 res[8]; - u32 DITHMODE; - u32 TPAL; -#ifdef CONFIG_S3C2410 - u32 LCDINTPND; - u32 LCDSRCPND; - u32 LCDINTMSK; - u32 LPCSEL; + u32 dithmode; + u32 tpal; +#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + u32 lcdintpnd; + u32 lcdsrcpnd; + u32 lcdintmsk; + u32 lpcsel; #endif }; +#ifdef CONFIG_S3C2410 /* NAND FLASH (see S3C2410 manual chapter 6) */ struct s3c2410_nand { - u32 NFCONF; - u32 NFCMD; - u32 NFADDR; - u32 NFDATA; - u32 NFSTAT; - u32 NFECC; + u32 nfconf; + u32 nfcmd; + u32 nfaddr; + u32 nfdata; + u32 nfstat; + u32 nfecc; }; +#endif +#ifdef CONFIG_S3C2440 +/* NAND FLASH (see S3C2440 manual chapter 6) */ +struct s3c2440_nand { + u32 nfconf; + u32 nfcont; + u32 nfcmd; + u32 nfaddr; + u32 nfdata; + u32 nfeccd0; + u32 nfeccd1; + u32 nfeccd; + u32 nfstat; + u32 nfstat0; + u32 nfstat1; +}; +#endif /* UART (see manual chapter 11) */ struct s3c24x0_uart { - u32 ULCON; - u32 UCON; - u32 UFCON; - u32 UMCON; - u32 UTRSTAT; - u32 UERSTAT; - u32 UFSTAT; - u32 UMSTAT; + u32 ulcon; + u32 ucon; + u32 ufcon; + u32 umcon; + u32 utrstat; + u32 uerstat; + u32 ufstat; + u32 umstat; #ifdef __BIG_ENDIAN u8 res1[3]; - u8 UTXH; + u8 utxh; u8 res2[3]; - u8 URXH; + u8 urxh; #else /* Little Endian */ - u8 UTXH; + u8 utxh; u8 res1[3]; - u8 URXH; + u8 urxh; u8 res2[3]; #endif - u32 UBRDIV; + u32 ubrdiv; }; /* PWM TIMER (see manual chapter 10) */ struct s3c24x0_timer { - u32 TCNTB; - u32 TCMPB; - u32 TCNTO; + u32 tcntb; + u32 tcmpb; + u32 tcnto; }; struct s3c24x0_timers { - u32 TCFG0; - u32 TCFG1; - u32 TCON; + u32 tcfg0; + u32 tcfg1; + u32 tcon; struct s3c24x0_timer ch[4]; - u32 TCNTB4; - u32 TCNTO4; + u32 tcntb4; + u32 tcnto4; }; @@ -207,9 +226,9 @@ struct s3c24x0_timers { struct s3c24x0_usb_dev_fifos { #ifdef __BIG_ENDIAN u8 res[3]; - u8 EP_FIFO_REG; + u8 ep_fifo_reg; #else /* little endian */ - u8 EP_FIFO_REG; + u8 ep_fifo_reg; u8 res[3]; #endif }; @@ -217,29 +236,29 @@ struct s3c24x0_usb_dev_fifos { struct s3c24x0_usb_dev_dmas { #ifdef __BIG_ENDIAN u8 res1[3]; - u8 EP_DMA_CON; + u8 ep_dma_con; u8 res2[3]; - u8 EP_DMA_UNIT; + u8 ep_dma_unit; u8 res3[3]; - u8 EP_DMA_FIFO; + u8 ep_dma_fifo; u8 res4[3]; - u8 EP_DMA_TTC_L; + u8 ep_dma_ttc_l; u8 res5[3]; - u8 EP_DMA_TTC_M; + u8 ep_dma_ttc_m; u8 res6[3]; - u8 EP_DMA_TTC_H; + u8 ep_dma_ttc_h; #else /* little endian */ - u8 EP_DMA_CON; + u8 ep_dma_con; u8 res1[3]; - u8 EP_DMA_UNIT; + u8 ep_dma_unit; u8 res2[3]; - u8 EP_DMA_FIFO; + u8 ep_dma_fifo; u8 res3[3]; - u8 EP_DMA_TTC_L; + u8 ep_dma_ttc_l; u8 res4[3]; - u8 EP_DMA_TTC_M; + u8 ep_dma_ttc_m; u8 res5[3]; - u8 EP_DMA_TTC_H; + u8 ep_dma_ttc_h; u8 res6[3]; #endif }; @@ -247,69 +266,69 @@ struct s3c24x0_usb_dev_dmas { struct s3c24x0_usb_device { #ifdef __BIG_ENDIAN u8 res1[3]; - u8 FUNC_ADDR_REG; + u8 func_addr_reg; u8 res2[3]; - u8 PWR_REG; + u8 pwr_reg; u8 res3[3]; - u8 EP_INT_REG; + u8 ep_int_reg; u8 res4[15]; - u8 USB_INT_REG; + u8 usb_int_reg; u8 res5[3]; - u8 EP_INT_EN_REG; + u8 ep_int_en_reg; u8 res6[15]; - u8 USB_INT_EN_REG; + u8 usb_int_en_reg; u8 res7[3]; - u8 FRAME_NUM1_REG; + u8 frame_num1_reg; u8 res8[3]; - u8 FRAME_NUM2_REG; + u8 frame_num2_reg; u8 res9[3]; - u8 INDEX_REG; + u8 index_reg; u8 res10[7]; - u8 MAXP_REG; + u8 maxp_reg; u8 res11[3]; - u8 EP0_CSR_IN_CSR1_REG; + u8 ep0_csr_in_csr1_reg; u8 res12[3]; - u8 IN_CSR2_REG; + u8 in_csr2_reg; u8 res13[7]; - u8 OUT_CSR1_REG; + u8 out_csr1_reg; u8 res14[3]; - u8 OUT_CSR2_REG; + u8 out_csr2_reg; u8 res15[3]; - u8 OUT_FIFO_CNT1_REG; + u8 out_fifo_cnt1_reg; u8 res16[3]; - u8 OUT_FIFO_CNT2_REG; + u8 out_fifo_cnt2_reg; #else /* little endian */ - u8 FUNC_ADDR_REG; + u8 func_addr_reg; u8 res1[3]; - u8 PWR_REG; + u8 pwr_reg; u8 res2[3]; - u8 EP_INT_REG; + u8 ep_int_reg; u8 res3[15]; - u8 USB_INT_REG; + u8 usb_int_reg; u8 res4[3]; - u8 EP_INT_EN_REG; + u8 ep_int_en_reg; u8 res5[15]; - u8 USB_INT_EN_REG; + u8 usb_int_en_reg; u8 res6[3]; - u8 FRAME_NUM1_REG; + u8 frame_num1_reg; u8 res7[3]; - u8 FRAME_NUM2_REG; + u8 frame_num2_reg; u8 res8[3]; - u8 INDEX_REG; + u8 index_reg; u8 res9[7]; - u8 MAXP_REG; + u8 maxp_reg; u8 res10[7]; - u8 EP0_CSR_IN_CSR1_REG; + u8 ep0_csr_in_csr1_reg; u8 res11[3]; - u8 IN_CSR2_REG; + u8 in_csr2_reg; u8 res12[3]; - u8 OUT_CSR1_REG; + u8 out_csr1_reg; u8 res13[7]; - u8 OUT_CSR2_REG; + u8 out_csr2_reg; u8 res14[3]; - u8 OUT_FIFO_CNT1_REG; + u8 out_fifo_cnt1_reg; u8 res15[3]; - u8 OUT_FIFO_CNT2_REG; + u8 out_fifo_cnt2_reg; u8 res16[3]; #endif /* __BIG_ENDIAN */ struct s3c24x0_usb_dev_fifos fifo[5]; @@ -319,18 +338,18 @@ struct s3c24x0_usb_device { /* WATCH DOG TIMER (see manual chapter 18) */ struct s3c24x0_watchdog { - u32 WTCON; - u32 WTDAT; - u32 WTCNT; + u32 wtcon; + u32 wtdat; + u32 wtcnt; }; /* IIC (see manual chapter 20) */ struct s3c24x0_i2c { - u32 IICCON; - u32 IICSTAT; - u32 IICADD; - u32 IICDS; + u32 iiccon; + u32 iicstat; + u32 iicadd; + u32 iicds; }; @@ -338,25 +357,25 @@ struct s3c24x0_i2c { struct s3c24x0_i2s { #ifdef __BIG_ENDIAN u16 res1; - u16 IISCON; + u16 iiscon; u16 res2; - u16 IISMOD; + u16 iismod; u16 res3; - u16 IISPSR; + u16 iispsr; u16 res4; - u16 IISFCON; + u16 iisfcon; u16 res5; - u16 IISFIFO; + u16 iisfifo; #else /* little endian */ - u16 IISCON; + u16 iiscon; u16 res1; - u16 IISMOD; + u16 iismod; u16 res2; - u16 IISPSR; + u16 iispsr; u16 res3; - u16 IISFCON; + u16 iisfcon; u16 res4; - u16 IISFIFO; + u16 iisfifo; u16 res5; #endif }; @@ -365,87 +384,146 @@ struct s3c24x0_i2s { /* I/O PORT (see manual chapter 9) */ struct s3c24x0_gpio { #ifdef CONFIG_S3C2400 - u32 PACON; - u32 PADAT; + u32 pacon; + u32 padat; - u32 PBCON; - u32 PBDAT; - u32 PBUP; + u32 pbcon; + u32 pbdat; + u32 pbup; - u32 PCCON; - u32 PCDAT; - u32 PCUP; + u32 pccon; + u32 pcdat; + u32 pcup; - u32 PDCON; - u32 PDDAT; - u32 PDUP; + u32 pdcon; + u32 pddat; + u32 pdup; - u32 PECON; - u32 PEDAT; - u32 PEUP; + u32 pecon; + u32 pedat; + u32 peup; - u32 PFCON; - u32 PFDAT; - u32 PFUP; + u32 pfcon; + u32 pfdat; + u32 pfup; - u32 PGCON; - u32 PGDAT; - u32 PGUP; + u32 pgcon; + u32 pgdat; + u32 pgup; - u32 OPENCR; + u32 opencr; - u32 MISCCR; - u32 EXTINT; + u32 misccr; + u32 extint; #endif #ifdef CONFIG_S3C2410 - u32 GPACON; - u32 GPADAT; + u32 gpacon; + u32 gpadat; u32 res1[2]; - u32 GPBCON; - u32 GPBDAT; - u32 GPBUP; + u32 gpbcon; + u32 gpbdat; + u32 gpbup; u32 res2; - u32 GPCCON; - u32 GPCDAT; - u32 GPCUP; + u32 gpccon; + u32 gpcdat; + u32 gpcup; u32 res3; - u32 GPDCON; - u32 GPDDAT; - u32 GPDUP; + u32 gpdcon; + u32 gpddat; + u32 gpdup; u32 res4; - u32 GPECON; - u32 GPEDAT; - u32 GPEUP; + u32 gpecon; + u32 gpedat; + u32 gpeup; u32 res5; - u32 GPFCON; - u32 GPFDAT; - u32 GPFUP; + u32 gpfcon; + u32 gpfdat; + u32 gpfup; u32 res6; - u32 GPGCON; - u32 GPGDAT; - u32 GPGUP; + u32 gpgcon; + u32 gpgdat; + u32 gpgup; u32 res7; - u32 GPHCON; - u32 GPHDAT; - u32 GPHUP; + u32 gphcon; + u32 gphdat; + u32 gphup; u32 res8; - u32 MISCCR; - u32 DCLKCON; - u32 EXTINT0; - u32 EXTINT1; - u32 EXTINT2; - u32 EINTFLT0; - u32 EINTFLT1; - u32 EINTFLT2; - u32 EINTFLT3; - u32 EINTMASK; - u32 EINTPEND; - u32 GSTATUS0; - u32 GSTATUS1; - u32 GSTATUS2; - u32 GSTATUS3; - u32 GSTATUS4; + u32 misccr; + u32 dclkcon; + u32 extint0; + u32 extint1; + u32 extint2; + u32 eintflt0; + u32 eintflt1; + u32 eintflt2; + u32 eintflt3; + u32 eintmask; + u32 eintpend; + u32 gstatus0; + u32 gstatus1; + u32 gstatus2; + u32 gstatus3; + u32 gstatus4; +#endif +#if defined(CONFIG_S3C2440) + u32 gpacon; + u32 gpadat; + u32 res1[2]; + u32 gpbcon; + u32 gpbdat; + u32 gpbup; + u32 res2; + u32 gpccon; + u32 gpcdat; + u32 gpcup; + u32 res3; + u32 gpdcon; + u32 gpddat; + u32 gpdup; + u32 res4; + u32 gpecon; + u32 gpedat; + u32 gpeup; + u32 res5; + u32 gpfcon; + u32 gpfdat; + u32 gpfup; + u32 res6; + u32 gpgcon; + u32 gpgdat; + u32 gpgup; + u32 res7; + u32 gphcon; + u32 gphdat; + u32 gphup; + u32 res8; + + u32 misccr; + u32 dclkcon; + u32 extint0; + u32 extint1; + u32 extint2; + u32 eintflt0; + u32 eintflt1; + u32 eintflt2; + u32 eintflt3; + u32 eintmask; + u32 eintpend; + u32 gstatus0; + u32 gstatus1; + u32 gstatus2; + u32 gstatus3; + u32 gstatus4; + + u32 res9; + u32 dsc0; + u32 dsc1; + u32 mslcon; + u32 gpjcon; + u32 gpjdat; + u32 gpjup; + u32 res10; #endif }; @@ -454,74 +532,74 @@ struct s3c24x0_gpio { struct s3c24x0_rtc { #ifdef __BIG_ENDIAN u8 res1[67]; - u8 RTCCON; + u8 rtccon; u8 res2[3]; - u8 TICNT; + u8 ticnt; u8 res3[11]; - u8 RTCALM; + u8 rtcalm; u8 res4[3]; - u8 ALMSEC; + u8 almsec; u8 res5[3]; - u8 ALMMIN; + u8 almmin; u8 res6[3]; - u8 ALMHOUR; + u8 almhour; u8 res7[3]; - u8 ALMDATE; + u8 almdate; u8 res8[3]; - u8 ALMMON; + u8 almmon; u8 res9[3]; - u8 ALMYEAR; + u8 almyear; u8 res10[3]; - u8 RTCRST; + u8 rtcrst; u8 res11[3]; - u8 BCDSEC; + u8 bcdsec; u8 res12[3]; - u8 BCDMIN; + u8 bcdmin; u8 res13[3]; - u8 BCDHOUR; + u8 bcdhour; u8 res14[3]; - u8 BCDDATE; + u8 bcddate; u8 res15[3]; - u8 BCDDAY; + u8 bcdday; u8 res16[3]; - u8 BCDMON; + u8 bcdmon; u8 res17[3]; - u8 BCDYEAR; + u8 bcdyear; #else /* little endian */ u8 res0[64]; - u8 RTCCON; + u8 rtccon; u8 res1[3]; - u8 TICNT; + u8 ticnt; u8 res2[11]; - u8 RTCALM; + u8 rtcalm; u8 res3[3]; - u8 ALMSEC; + u8 almsec; u8 res4[3]; - u8 ALMMIN; + u8 almmin; u8 res5[3]; - u8 ALMHOUR; + u8 almhour; u8 res6[3]; - u8 ALMDATE; + u8 almdate; u8 res7[3]; - u8 ALMMON; + u8 almmon; u8 res8[3]; - u8 ALMYEAR; + u8 almyear; u8 res9[3]; - u8 RTCRST; + u8 rtcrst; u8 res10[3]; - u8 BCDSEC; + u8 bcdsec; u8 res11[3]; - u8 BCDMIN; + u8 bcdmin; u8 res12[3]; - u8 BCDHOUR; + u8 bcdhour; u8 res13[3]; - u8 BCDDATE; + u8 bcddate; u8 res14[3]; - u8 BCDDAY; + u8 bcdday; u8 res15[3]; - u8 BCDMON; + u8 bcdmon; u8 res16[3]; - u8 BCDYEAR; + u8 bcdyear; u8 res17[3]; #endif }; @@ -529,34 +607,34 @@ struct s3c24x0_rtc { /* ADC (see manual chapter 16) */ struct s3c2400_adc { - u32 ADCCON; - u32 ADCDAT; + u32 adccon; + u32 adcdat; }; /* ADC (see manual chapter 16) */ struct s3c2410_adc { - u32 ADCCON; - u32 ADCTSC; - u32 ADCDLY; - u32 ADCDAT0; - u32 ADCDAT1; + u32 adccon; + u32 adctsc; + u32 adcdly; + u32 adcdat0; + u32 adcdat1; }; /* SPI (see manual chapter 22) */ struct s3c24x0_spi_channel { - u8 SPCON; + u8 spcon; u8 res1[3]; - u8 SPSTA; + u8 spsta; u8 res2[3]; - u8 SPPIN; + u8 sppin; u8 res3[3]; - u8 SPPRE; + u8 sppre; u8 res4[3]; - u8 SPTDAT; + u8 sptdat; u8 res5[3]; - u8 SPRDAT; + u8 sprdat; u8 res6[3]; u8 res7[16]; }; @@ -570,53 +648,53 @@ struct s3c24x0_spi { struct s3c2400_mmc { #ifdef __BIG_ENDIAN u8 res1[3]; - u8 MMCON; + u8 mmcon; u8 res2[3]; - u8 MMCRR; + u8 mmcrr; u8 res3[3]; - u8 MMFCON; + u8 mmfcon; u8 res4[3]; - u8 MMSTA; + u8 mmsta; u16 res5; - u16 MMFSTA; + u16 mmfsta; u8 res6[3]; - u8 MMPRE; + u8 mmpre; u16 res7; - u16 MMLEN; + u16 mmlen; u8 res8[3]; - u8 MMCR7; - u32 MMRSP[4]; + u8 mmcr7; + u32 mmrsp[4]; u8 res9[3]; - u8 MMCMD0; - u32 MMCMD1; + u8 mmcmd0; + u32 mmcmd1; u16 res10; - u16 MMCR16; + u16 mmcr16; u8 res11[3]; - u8 MMDAT; + u8 mmdat; #else - u8 MMCON; + u8 mmcon; u8 res1[3]; - u8 MMCRR; + u8 mmcrr; u8 res2[3]; - u8 MMFCON; + u8 mmfcon; u8 res3[3]; - u8 MMSTA; + u8 mmsta; u8 res4[3]; - u16 MMFSTA; + u16 mmfsta; u16 res5; - u8 MMPRE; + u8 mmpre; u8 res6[3]; - u16 MMLEN; + u16 mmlen; u16 res7; - u8 MMCR7; + u8 mmcr7; u8 res8[3]; - u32 MMRSP[4]; - u8 MMCMD0; + u32 mmrsp[4]; + u8 mmcmd0; u8 res9[3]; - u32 MMCMD1; - u16 MMCR16; + u32 mmcmd1; + u16 mmcr16; u16 res10; - u8 MMDAT; + u8 mmdat; u8 res11[3]; #endif }; @@ -624,29 +702,29 @@ struct s3c2400_mmc { /* SD INTERFACE (see S3C2410 manual chapter 19) */ struct s3c2410_sdi { - u32 SDICON; - u32 SDIPRE; - u32 SDICARG; - u32 SDICCON; - u32 SDICSTA; - u32 SDIRSP0; - u32 SDIRSP1; - u32 SDIRSP2; - u32 SDIRSP3; - u32 SDIDTIMER; - u32 SDIBSIZE; - u32 SDIDCON; - u32 SDIDCNT; - u32 SDIDSTA; - u32 SDIFSTA; + u32 sdicon; + u32 sdipre; + u32 sdicarg; + u32 sdiccon; + u32 sdicsta; + u32 sdirsp0; + u32 sdirsp1; + u32 sdirsp2; + u32 sdirsp3; + u32 sdidtimer; + u32 sdibsize; + u32 sdidcon; + u32 sdidcnt; + u32 sdidsta; + u32 sdifsta; #ifdef __BIG_ENDIAN u8 res[3]; - u8 SDIDAT; + u8 sdidat; #else - u8 SDIDAT; + u8 sdidat; u8 res[3]; #endif - u32 SDIIMSK; + u32 sdiimsk; }; #endif /*__S3C24X0_H__*/ diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h b/arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h index c37d4a108d7..54184c460bb 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0_cpu.h @@ -22,6 +22,8 @@ #include #elif defined CONFIG_S3C2410 #include +#elif defined CONFIG_S3C2440 + #include #else #error Please define the s3c24x0 cpu type #endif diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c index eaeec828d70..978e6fdeff9 100644 --- a/board/mpl/vcma9/vcma9.c +++ b/board/mpl/vcma9/vcma9.c @@ -78,42 +78,43 @@ int board_init(void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* to reduce PLL lock time, adjust the LOCKTIME register */ - clk_power->LOCKTIME = 0xFFFFFF; + clk_power->locktime = 0xFFFFFF; /* configure MPLL */ - clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); + clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); /* some delay between MPLL and UPLL */ delay (4000); /* configure UPLL */ - clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); + clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); /* some delay between MPLL and UPLL */ delay (8000); /* set up the I/O ports */ - gpio->GPACON = 0x007FFFFF; - gpio->GPBCON = 0x002AAAAA; - gpio->GPBUP = 0x000002BF; - gpio->GPCCON = 0xAAAAAAAA; - gpio->GPCUP = 0x0000FFFF; - gpio->GPDCON = 0xAAAAAAAA; - gpio->GPDUP = 0x0000FFFF; - gpio->GPECON = 0xAAAAAAAA; - gpio->GPEUP = 0x000037F7; - gpio->GPFCON = 0x00000000; - gpio->GPFUP = 0x00000000; - gpio->GPGCON = 0xFFEAFF5A; - gpio->GPGUP = 0x0000F0DC; - gpio->GPHCON = 0x0028AAAA; - gpio->GPHUP = 0x00000656; + gpio->gpacon = 0x007FFFFF; + gpio->gpbcon = 0x002AAAAA; + gpio->gpbup = 0x000002BF; + gpio->gpccon = 0xAAAAAAAA; + gpio->gpcup = 0x0000FFFF; + gpio->gpdcon = 0xAAAAAAAA; + gpio->gpdup = 0x0000FFFF; + gpio->gpecon = 0xAAAAAAAA; + gpio->gpeup = 0x000037F7; + gpio->gpfcon = 0x00000000; + gpio->gpfup = 0x00000000; + gpio->gpgcon = 0xFFEAFF5A; + gpio->gpgup = 0x0000F0DC; + gpio->gphcon = 0x0028AAAA; + gpio->gphup = 0x00000656; /* setup correct IRQ modes for NIC */ - gpio->EXTINT2 = (gpio->EXTINT2 & ~(7<<8)) | (4<<8); /* rising edge mode */ + /* rising edge mode */ + gpio->extint2 = (gpio->extint2 & ~(7<<8)) | (4<<8); /* select USB port 2 to be host or device (fix to host for now) */ - gpio->MISCCR |= 0x08; + gpio->misccr |= 0x08; /* init serial */ gd->baudrate = CONFIG_BAUDRATE; diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c index 1294d3f1b1c..895bd7789ab 100644 --- a/board/samsung/smdk2400/smdk2400.c +++ b/board/samsung/smdk2400/smdk2400.c @@ -52,30 +52,30 @@ int board_init (void) /* memory and cpu-speed are setup before relocation */ /* change the clock to be 50 MHz 1:1:1 */ - clk_power->MPLLCON = 0x5c042; - clk_power->CLKDIVN = 0; + clk_power->mpllcon = 0x5c042; + clk_power->clkdivn = 0; /* set up the I/O ports */ - gpio->PACON = 0x3ffff; - gpio->PBCON = 0xaaaaaaaa; - gpio->PBUP = 0xffff; - gpio->PECON = 0x0; - gpio->PEUP = 0x0; + gpio->pacon = 0x3ffff; + gpio->pbcon = 0xaaaaaaaa; + gpio->pbup = 0xffff; + gpio->pecon = 0x0; + gpio->peup = 0x0; #ifdef CONFIG_HWFLOW /*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */ /* 10, 10, 00, 00, 10, 00, 10 */ - gpio->PFCON=0xa22; + gpio->pfcon = 0xa22; /* Disable pull-up on Rx, Tx, CTS and RTS pins */ - gpio->PFUP=0x35; + gpio->pfup = 0x35; #else /*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */ /* 00, 00, 00, 00, 10, 00, 10 */ - gpio->PFCON = 0x22; + gpio->pfcon = 0x22; /* Disable pull-up on Rx and Tx pins */ - gpio->PFUP = 0x5; + gpio->pfup = 0x5; #endif /* CONFIG_HWFLOW */ - gpio->PGCON = 0x0; - gpio->PGUP = 0x0; - gpio->OPENCR = 0x0; + gpio->pgcon = 0x0; + gpio->pgup = 0x0; + gpio->opencr = 0x0; /* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */ gd->bd->bi_arch_number = MACH_TYPE_SMDK2400; diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c index 5d1a8bb0cf6..76a24bb9398 100644 --- a/board/samsung/smdk2410/smdk2410.c +++ b/board/samsung/smdk2410/smdk2410.c @@ -73,36 +73,36 @@ int board_init (void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* to reduce PLL lock time, adjust the LOCKTIME register */ - clk_power->LOCKTIME = 0xFFFFFF; + clk_power->locktime = 0xFFFFFF; /* configure MPLL */ - clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); + clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); /* some delay between MPLL and UPLL */ delay (4000); /* configure UPLL */ - clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); + clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); /* some delay between MPLL and UPLL */ delay (8000); /* set up the I/O ports */ - gpio->GPACON = 0x007FFFFF; - gpio->GPBCON = 0x00044555; - gpio->GPBUP = 0x000007FF; - gpio->GPCCON = 0xAAAAAAAA; - gpio->GPCUP = 0x0000FFFF; - gpio->GPDCON = 0xAAAAAAAA; - gpio->GPDUP = 0x0000FFFF; - gpio->GPECON = 0xAAAAAAAA; - gpio->GPEUP = 0x0000FFFF; - gpio->GPFCON = 0x000055AA; - gpio->GPFUP = 0x000000FF; - gpio->GPGCON = 0xFF95FFBA; - gpio->GPGUP = 0x0000FFFF; - gpio->GPHCON = 0x002AFAAA; - gpio->GPHUP = 0x000007FF; + gpio->gpacon = 0x007FFFFF; + gpio->gpbcon = 0x00044555; + gpio->gpbup = 0x000007FF; + gpio->gpccon = 0xAAAAAAAA; + gpio->gpcup = 0x0000FFFF; + gpio->gpdcon = 0xAAAAAAAA; + gpio->gpdup = 0x0000FFFF; + gpio->gpecon = 0xAAAAAAAA; + gpio->gpeup = 0x0000FFFF; + gpio->gpfcon = 0x000055AA; + gpio->gpfup = 0x000000FF; + gpio->gpgcon = 0xFF95FFBA; + gpio->gpgup = 0x0000FFFF; + gpio->gphcon = 0x002AFAAA; + gpio->gphup = 0x000007FF; /* arch number of SMDK2410-Board */ gd->bd->bi_arch_number = MACH_TYPE_SMDK2410; diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c index 3a936778ec4..c82382dc828 100644 --- a/board/sbc2410x/sbc2410x.c +++ b/board/sbc2410x/sbc2410x.c @@ -80,40 +80,40 @@ int board_init (void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* to reduce PLL lock time, adjust the LOCKTIME register */ - clk_power->LOCKTIME = 0xFFFFFF; + clk_power->locktime = 0xFFFFFF; /* configure MPLL */ - clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); + clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); /* some delay between MPLL and UPLL */ delay (4000); /* configure UPLL */ - clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); + clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); /* some delay between MPLL and UPLL */ delay (8000); /* set up the I/O ports */ - gpio->GPACON = 0x007FFFFF; - gpio->GPBCON = 0x00044556; - gpio->GPBUP = 0x000007FF; - gpio->GPCCON = 0xAAAAAAAA; - gpio->GPCUP = 0x0000FFFF; - gpio->GPDCON = 0xAAAAAAAA; - gpio->GPDUP = 0x0000FFFF; - gpio->GPECON = 0xAAAAAAAA; - gpio->GPEUP = 0x0000FFFF; - gpio->GPFCON = 0x000055AA; - gpio->GPFUP = 0x000000FF; - gpio->GPGCON = 0xFF95FF3A; - gpio->GPGUP = 0x0000FFFF; - gpio->GPHCON = 0x0016FAAA; - gpio->GPHUP = 0x000007FF; + gpio->gpacon = 0x007FFFFF; + gpio->gpbcon = 0x00044556; + gpio->gpbup = 0x000007FF; + gpio->gpccon = 0xAAAAAAAA; + gpio->gpcup = 0x0000FFFF; + gpio->gpdcon = 0xAAAAAAAA; + gpio->gpdup = 0x0000FFFF; + gpio->gpecon = 0xAAAAAAAA; + gpio->gpeup = 0x0000FFFF; + gpio->gpfcon = 0x000055AA; + gpio->gpfup = 0x000000FF; + gpio->gpgcon = 0xFF95FF3A; + gpio->gpgup = 0x0000FFFF; + gpio->gphcon = 0x0016FAAA; + gpio->gphup = 0x000007FF; - gpio->EXTINT0=0x22222222; - gpio->EXTINT1=0x22222222; - gpio->EXTINT2=0x22222222; + gpio->extint0 = 0x22222222; + gpio->extint1 = 0x22222222; + gpio->extint2 = 0x22222222; /* arch number of SMDK2410-Board */ gd->bd->bi_arch_number = MACH_TYPE_SMDK2410; diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index ca4415c0b92..dec3c618279 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -637,28 +637,28 @@ static int adc_read (unsigned int channel) adc_init (); - padc->ADCCON &= ~ADC_STDBM; /* select normal mode */ - padc->ADCCON &= ~(0x7 << 3); /* clear the channel bits */ - padc->ADCCON |= ((channel << 3) | ADC_ENABLE_START); + padc->adccon &= ~ADC_STDBM; /* select normal mode */ + padc->adccon &= ~(0x7 << 3); /* clear the channel bits */ + padc->adccon |= ((channel << 3) | ADC_ENABLE_START); while (j--) { - if ((padc->ADCCON & ADC_ENABLE_START) == 0) + if ((padc->adccon & ADC_ENABLE_START) == 0) break; udelay (1); } if (j == 0) { printf("%s: ADC timeout\n", __FUNCTION__); - padc->ADCCON |= ADC_STDBM; /* select standby mode */ + padc->adccon |= ADC_STDBM; /* select standby mode */ return -1; } - result = padc->ADCDAT & 0x3FF; + result = padc->adcdat & 0x3FF; - padc->ADCCON |= ADC_STDBM; /* select standby mode */ + padc->adccon |= ADC_STDBM; /* select standby mode */ debug ("%s: channel %d, result[DIGIT]=%d\n", __FUNCTION__, - (padc->ADCCON >> 3) & 0x7, result); + (padc->adccon >> 3) & 0x7, result); /* * Wait for ADC to be ready for next conversion. This delay value was @@ -676,8 +676,8 @@ static void adc_init (void) padc = s3c2400_get_base_adc(); - padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */ - padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */ + padc->adccon &= ~(0xff << 6); /* clear prescaler bits */ + padc->adccon |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */ /* * Wait some time to avoid problem with very first call of @@ -699,10 +699,10 @@ static void led_set (unsigned int state) switch (state) { case 0: /* turn LED off */ - gpio->PADAT |= (1 << 12); + gpio->padat |= (1 << 12); break; case 1: /* turn LED on */ - gpio->PADAT &= ~(1 << 12); + gpio->padat &= ~(1 << 12); break; default: break; @@ -729,8 +729,8 @@ static void led_init (void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* configure GPA12 as output and set to High -> LED off */ - gpio->PACON &= ~(1 << 12); - gpio->PADAT |= (1 << 12); + gpio->pacon &= ~(1 << 12); + gpio->padat |= (1 << 12); } diff --git a/board/trab/rs485.c b/board/trab/rs485.c index 6a3a4cda9ce..30336f262cf 100644 --- a/board/trab/rs485.c +++ b/board/trab/rs485.c @@ -51,16 +51,16 @@ static void rs485_setbrg (void) reg = (33000000 / (16 * 38400)) - 1; /* FIFO enable, Tx/Rx FIFO clear */ - uart->UFCON = 0x07; - uart->UMCON = 0x0; + uart->ufcon = 0x07; + uart->umcon = 0x0; /* Normal,No parity,1 stop,8 bit */ - uart->ULCON = 0x3; + uart->ulcon = 0x3; /* * tx=level,rx=edge,disable timeout int.,enable rx error int., * normal,interrupt or polling */ - uart->UCON = 0x245; - uart->UBRDIV = reg; + uart->ucon = 0x245; + uart->ubrdiv = reg; for (i = 0; i < 100; i++); } @@ -69,16 +69,16 @@ static void rs485_cfgio (void) { struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - gpio->PFCON &= ~(0x3 << 2); - gpio->PFCON |= (0x2 << 2); /* configure GPF1 as RXD1 */ + gpio->pfcon &= ~(0x3 << 2); + gpio->pfcon |= (0x2 << 2); /* configure GPF1 as RXD1 */ - gpio->PFCON &= ~(0x3 << 6); - gpio->PFCON |= (0x2 << 6); /* configure GPF3 as TXD1 */ + gpio->pfcon &= ~(0x3 << 6); + gpio->pfcon |= (0x2 << 6); /* configure GPF3 as TXD1 */ - gpio->PFUP |= (1 << 1); /* disable pullup on GPF1 */ - gpio->PFUP |= (1 << 3); /* disable pullup on GPF3 */ + gpio->pfup |= (1 << 1); /* disable pullup on GPF1 */ + gpio->pfup |= (1 << 3); /* disable pullup on GPF3 */ - gpio->PACON &= ~(1 << 11); /* set GPA11 (RS485_DE) to output */ + gpio->pacon &= ~(1 << 11); /* set GPA11 (RS485_DE) to output */ } /* @@ -104,9 +104,10 @@ int rs485_getc (void) struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR); /* wait for character to arrive */ - while (!(uart->UTRSTAT & 0x1)); + while (!(uart->utrstat & 0x1)) + ; - return uart->URXH & 0xff; + return uart->urxh & 0xff; } /* @@ -117,9 +118,10 @@ void rs485_putc (const char c) struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR); /* wait for room in the tx FIFO */ - while (!(uart->UTRSTAT & 0x2)); + while (!(uart->utrstat & 0x2)) + ; - uart->UTXH = c; + uart->utxh = c; /* If \n, also do \r */ if (c == '\n') @@ -133,7 +135,7 @@ int rs485_tstc (void) { struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR); - return uart->UTRSTAT & 0x1; + return uart->utrstat & 0x1; } void rs485_puts (const char *s) @@ -172,9 +174,9 @@ static void set_rs485de(unsigned char rs485de_state) /* This is on PORT A bit 11 */ if(rs485de_state) - gpio->PADAT |= (1 << 11); + gpio->padat |= (1 << 11); else - gpio->PADAT &= ~(1 << 11); + gpio->padat &= ~(1 << 11); } diff --git a/board/trab/trab.c b/board/trab/trab.c index 828facd763e..0f74e8fa1b7 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -77,36 +77,36 @@ int board_init () #ifdef CONFIG_TRAB_50MHZ /* change the clock to be 50 MHz 1:1:1 */ /* MDIV:0x5c PDIV:4 SDIV:2 */ - clk_power->MPLLCON = 0x5c042; - clk_power->CLKDIVN = 0; + clk_power->mpllcon = 0x5c042; + clk_power->clkdivn = 0; #else /* change the clock to be 133 MHz 1:2:4 */ /* MDIV:0x7d PDIV:4 SDIV:1 */ - clk_power->MPLLCON = 0x7d041; - clk_power->CLKDIVN = 3; + clk_power->mpllcon = 0x7d041; + clk_power->clkdivn = 3; #endif /* set up the I/O ports */ - gpio->PACON = 0x3ffff; - gpio->PBCON = 0xaaaaaaaa; - gpio->PBUP = 0xffff; + gpio->pacon = 0x3ffff; + gpio->pbcon = 0xaaaaaaaa; + gpio->pbup = 0xffff; /* INPUT nCTS0 nRTS0 TXD[1] TXD[0] RXD[1] RXD[0] */ /* 00, 10, 10, 10, 10, 10, 10 */ - gpio->PFCON = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10); + gpio->pfcon = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10); #ifdef CONFIG_HWFLOW /* do not pull up RXD0, RXD1, TXD0, TXD1, CTS0, RTS0 */ - gpio->PFUP = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5); + gpio->pfup = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5); #else /* do not pull up RXD0, RXD1, TXD0, TXD1 */ - gpio->PFUP = (1<<0) | (1<<1) | (1<<2) | (1<<3); + gpio->pfup = (1<<0) | (1<<1) | (1<<2) | (1<<3); #endif - gpio->PGCON = 0x0; - gpio->PGUP = 0x0; - gpio->OPENCR= 0x0; + gpio->pgcon = 0x0; + gpio->pgup = 0x0; + gpio->opencr = 0x0; /* suppress flicker of the VFDs */ - gpio->MISCCR = 0x40; - gpio->PFCON |= (2<<12); + gpio->misccr = 0x40; + gpio->pfcon |= (2<<12); gd->bd->bi_arch_number = MACH_TYPE_TRAB; @@ -114,8 +114,8 @@ int board_init () gd->bd->bi_boot_params = 0x0c000100; /* Make sure both buzzers are turned off */ - gpio->PDCON |= 0x5400; - gpio->PDDAT &= ~0xE0; + gpio->pdcon |= 0x5400; + gpio->pddat &= ~0xE0; #ifdef CONFIG_VFD vfd_init_clocks(); @@ -132,7 +132,7 @@ int board_init () #ifdef CONFIG_DRIVER_S3C24X0_I2C /* Configure I/O ports PG5 und PG6 for I2C */ - gpio->PGCON = (gpio->PGCON & 0x003c00) | 0x003c00; + gpio->pgcon = (gpio->pgcon & 0x003c00) | 0x003c00; #endif /* CONFIG_DRIVER_S3C24X0_I2C */ return 0; @@ -341,14 +341,14 @@ static inline void SET_CS_TOUCH(void) { struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - gpio->PDDAT &= 0x5FF; + gpio->pddat &= 0x5FF; } static inline void CLR_CS_TOUCH(void) { struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - gpio->PDDAT |= 0x200; + gpio->pddat |= 0x200; } static void spi_init(void) @@ -358,20 +358,20 @@ static void spi_init(void) int i; /* Configure I/O ports. */ - gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000; - gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000; - gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000; - gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000; + gpio->pdcon = (gpio->pdcon & 0xF3FFFF) | 0x040000; + gpio->pgcon = (gpio->pgcon & 0x0F3FFF) | 0x008000; + gpio->pgcon = (gpio->pgcon & 0x0CFFFF) | 0x020000; + gpio->pgcon = (gpio->pgcon & 0x03FFFF) | 0x080000; CLR_CS_TOUCH(); - spi->ch[0].SPPRE = 0x1F; /* Baudrate ca. 514kHz */ - spi->ch[0].SPPIN = 0x01; /* SPI-MOSI holds Level after last bit */ - spi->ch[0].SPCON = 0x1A; /* Polling, Prescaler, Master, CPOL=0, CPHA=1 */ + spi->ch[0].sppre = 0x1F; /* Baudrate ca. 514kHz */ + spi->ch[0].sppin = 0x01; /* SPI-MOSI holds Level after last bit */ + spi->ch[0].spcon = 0x1A; /* Polling, Prescale, Master, CPOL=0, CPHA=1 */ /* Dummy byte ensures clock to be low. */ for (i = 0; i < 10; i++) { - spi->ch[0].SPTDAT = 0xFF; + spi->ch[0].sptdat = 0xFF; } wait_transmit_done(); } @@ -380,7 +380,8 @@ static void wait_transmit_done(void) { struct s3c24x0_spi * const spi = s3c24x0_get_base_spi(); - while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */ + while (!(spi->ch[0].spsta & 0x01)) /* wait until transfer is done */ + ; } static void tsc2000_write(unsigned int page, unsigned int reg, @@ -394,13 +395,13 @@ static void tsc2000_write(unsigned int page, unsigned int reg, command |= (page << 11); command |= (reg << 5); - spi->ch[0].SPTDAT = (command & 0xFF00) >> 8; + spi->ch[0].sptdat = (command & 0xFF00) >> 8; wait_transmit_done(); - spi->ch[0].SPTDAT = (command & 0x00FF); + spi->ch[0].sptdat = (command & 0x00FF); wait_transmit_done(); - spi->ch[0].SPTDAT = (data & 0xFF00) >> 8; + spi->ch[0].sptdat = (data & 0xFF00) >> 8; wait_transmit_done(); - spi->ch[0].SPTDAT = (data & 0x00FF); + spi->ch[0].sptdat = (data & 0x00FF); wait_transmit_done(); CLR_CS_TOUCH(); diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c index 268162e53ae..fe3dab351f9 100644 --- a/board/trab/trab_fkt.c +++ b/board/trab/trab_fkt.c @@ -411,28 +411,28 @@ static int adc_read (unsigned int channel) padc = s3c2400_get_base_adc(); channel &= 0x7; - padc->ADCCON &= ~ADC_STDBM; /* select normal mode */ - padc->ADCCON &= ~(0x7 << 3); /* clear the channel bits */ - padc->ADCCON |= ((channel << 3) | ADC_ENABLE_START); + padc->adccon &= ~ADC_STDBM; /* select normal mode */ + padc->adccon &= ~(0x7 << 3); /* clear the channel bits */ + padc->adccon |= ((channel << 3) | ADC_ENABLE_START); while (j--) { - if ((padc->ADCCON & ADC_ENABLE_START) == 0) + if ((padc->adccon & ADC_ENABLE_START) == 0) break; udelay (1); } if (j == 0) { printf("%s: ADC timeout\n", __FUNCTION__); - padc->ADCCON |= ADC_STDBM; /* select standby mode */ + padc->adccon |= ADC_STDBM; /* select standby mode */ return -1; } - result = padc->ADCDAT & 0x3FF; + result = padc->adcdat & 0x3FF; - padc->ADCCON |= ADC_STDBM; /* select standby mode */ + padc->adccon |= ADC_STDBM; /* select standby mode */ debug ("%s: channel %d, result[DIGIT]=%d\n", __FUNCTION__, - (padc->ADCCON >> 3) & 0x7, result); + (padc->adccon >> 3) & 0x7, result); /* * Wait for ADC to be ready for next conversion. This delay value was @@ -450,8 +450,8 @@ static void adc_init (void) padc = s3c2400_get_base_adc(); - padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */ - padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */ + padc->adccon &= ~(0xff << 6); /* clear prescaler bits */ + padc->adccon |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */ /* * Wait some time to avoid problem with very first call of @@ -493,10 +493,10 @@ int do_power_switch (void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* configure GPE7 as input */ - gpio->PECON &= ~(0x3 << (2 * 7)); + gpio->pecon &= ~(0x3 << (2 * 7)); /* signal GPE7 from power switch is low active: 0=on , 1=off */ - result = ((gpio->PEDAT & (1 << 7)) == (1 << 7)) ? 0 : 1; + result = ((gpio->pedat & (1 << 7)) == (1 << 7)) ? 0 : 1; print_identifier (); printf("%d\n", result); @@ -561,17 +561,17 @@ int do_vfd_id (void) /* try to red vfd board id from the value defined by pull-ups */ - pcup_old = gpio->PCUP; - pccon_old = gpio->PCCON; + pcup_old = gpio->pcup; + pccon_old = gpio->pccon; - gpio->PCUP = (gpio->PCUP & 0xFFF0); /* activate GPC0...GPC3 pull-ups */ - gpio->PCCON = (gpio->PCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as + gpio->pcup = (gpio->pcup & 0xFFF0); /* activate GPC0...GPC3 pull-ups */ + gpio->pccon = (gpio->pccon & 0xFFFFFF00); /* configure GPC0...GPC3 as * inputs */ udelay (10); /* allow signals to settle */ - vfd_board_id = (~gpio->PCDAT) & 0x000F; /* read GPC0...GPC3 port pins */ + vfd_board_id = (~gpio->pcdat) & 0x000F; /* read GPC0...GPC3 port pins */ - gpio->PCCON = pccon_old; - gpio->PCUP = pcup_old; + gpio->pccon = pccon_old; + gpio->pcup = pcup_old; /* print vfd_board_id to console */ print_identifier (); @@ -593,40 +593,40 @@ int do_buzzer (char * const *argv) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* set prescaler for timer 2, 3 and 4 */ - timers->TCFG0 &= ~0xFF00; - timers->TCFG0 |= 0x0F00; + timers->tcfg0 &= ~0xFF00; + timers->tcfg0 |= 0x0F00; /* set divider for timer 2 */ - timers->TCFG1 &= ~0xF00; - timers->TCFG1 |= 0x300; + timers->tcfg1 &= ~0xF00; + timers->tcfg1 |= 0x300; /* set frequency */ counter = (PCLK / BUZZER_FREQ) >> 9; - timers->ch[2].TCNTB = counter; - timers->ch[2].TCMPB = counter / 2; + timers->ch[2].tcntb = counter; + timers->ch[2].tcmpb = counter / 2; if (strcmp (argv[2], "on") == 0) { debug ("%s: frequency: %d\n", __FUNCTION__, BUZZER_FREQ); /* configure pin GPD7 as TOUT2 */ - gpio->PDCON &= ~0xC000; - gpio->PDCON |= 0x8000; + gpio->pdcon &= ~0xC000; + gpio->pdcon |= 0x8000; /* start */ - timers->TCON = (timers->TCON | UPDATE2 | RELOAD2) & + timers->tcon = (timers->tcon | UPDATE2 | RELOAD2) & ~INVERT2; - timers->TCON = (timers->TCON | START2) & ~UPDATE2; + timers->tcon = (timers->tcon | START2) & ~UPDATE2; return (0); } else if (strcmp (argv[2], "off") == 0) { /* stop */ - timers->TCON &= ~(START2 | RELOAD2); + timers->tcon &= ~(START2 | RELOAD2); /* configure GPD7 as output and set to low */ - gpio->PDCON &= ~0xC000; - gpio->PDCON |= 0x4000; - gpio->PDDAT &= ~0x80; + gpio->pdcon &= ~0xC000; + gpio->pdcon |= 0x4000; + gpio->pddat &= ~0x80; return (0); } @@ -640,12 +640,12 @@ int do_led (char * const *argv) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* configure PC14 and PC15 as output */ - gpio->PCCON &= ~(0xF << 28); - gpio->PCCON |= (0x5 << 28); + gpio->pccon &= ~(0xF << 28); + gpio->pccon |= (0x5 << 28); /* configure PD0 and PD4 as output */ - gpio->PDCON &= ~((0x3 << 8) | 0x3); - gpio->PDCON |= ((0x1 << 8) | 0x1); + gpio->pdcon &= ~((0x3 << 8) | 0x3); + gpio->pdcon |= ((0x1 << 8) | 0x1); switch (simple_strtoul(argv[2], NULL, 10)) { @@ -655,30 +655,30 @@ int do_led (char * const *argv) case 2: if (strcmp (argv[3], "on") == 0) - gpio->PCDAT |= (1 << 14); + gpio->pcdat |= (1 << 14); else - gpio->PCDAT &= ~(1 << 14); + gpio->pcdat &= ~(1 << 14); return 0; case 3: if (strcmp (argv[3], "on") == 0) - gpio->PCDAT |= (1 << 15); + gpio->pcdat |= (1 << 15); else - gpio->PCDAT &= ~(1 << 15); + gpio->pcdat &= ~(1 << 15); return 0; case 4: if (strcmp (argv[3], "on") == 0) - gpio->PDDAT |= (1 << 0); + gpio->pddat |= (1 << 0); else - gpio->PDDAT &= ~(1 << 0); + gpio->pddat &= ~(1 << 0); return 0; case 5: if (strcmp (argv[3], "on") == 0) - gpio->PDDAT |= (1 << 4); + gpio->pddat |= (1 << 4); else - gpio->PDDAT &= ~(1 << 4); + gpio->pddat &= ~(1 << 4); return 0; default: @@ -695,22 +695,22 @@ int do_full_bridge (char * const *argv) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* configure PD5 and PD6 as output */ - gpio->PDCON &= ~((0x3 << 5*2) | (0x3 << 6*2)); - gpio->PDCON |= ((0x1 << 5*2) | (0x1 << 6*2)); + gpio->pdcon &= ~((0x3 << 5*2) | (0x3 << 6*2)); + gpio->pdcon |= ((0x1 << 5*2) | (0x1 << 6*2)); if (strcmp (argv[2], "+") == 0) { - gpio->PDDAT |= (1 << 5); - gpio->PDDAT |= (1 << 6); + gpio->pddat |= (1 << 5); + gpio->pddat |= (1 << 6); return 0; } else if (strcmp (argv[2], "-") == 0) { - gpio->PDDAT &= ~(1 << 5); - gpio->PDDAT |= (1 << 6); + gpio->pddat &= ~(1 << 5); + gpio->pddat |= (1 << 6); return 0; } else if (strcmp (argv[2], "off") == 0) { - gpio->PDDAT &= ~(1 << 5); - gpio->PDDAT &= ~(1 << 6); + gpio->pddat &= ~(1 << 5); + gpio->pddat &= ~(1 << 6); return 0; } printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]); @@ -804,15 +804,15 @@ int do_motor (char * const *argv) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* Configure I/O port */ - gpio->PGCON &= ~(0x3 << 0); - gpio->PGCON |= (0x1 << 0); + gpio->pgcon &= ~(0x3 << 0); + gpio->pgcon |= (0x1 << 0); if (strcmp (argv[2], "on") == 0) { - gpio->PGDAT &= ~(1 << 0); + gpio->pgdat &= ~(1 << 0); return 0; } if (strcmp (argv[2], "off") == 0) { - gpio->PGDAT |= (1 << 0); + gpio->pgdat |= (1 << 0); return 0; } printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]); @@ -832,36 +832,36 @@ int do_pwm (char * const *argv) if (strcmp (argv[2], "on") == 0) { /* configure pin GPD8 as TOUT3 */ - gpio->PDCON &= ~(0x3 << 8*2); - gpio->PDCON |= (0x2 << 8*2); + gpio->pdcon &= ~(0x3 << 8*2); + gpio->pdcon |= (0x2 << 8*2); /* set prescaler for timer 2, 3 and 4 */ - timers->TCFG0 &= ~0xFF00; - timers->TCFG0 |= 0x0F00; + timers->tcfg0 &= ~0xFF00; + timers->tcfg0 |= 0x0F00; /* set divider for timer 3 */ - timers->TCFG1 &= ~(0xf << 12); - timers->TCFG1 |= (0x3 << 12); + timers->tcfg1 &= ~(0xf << 12); + timers->tcfg1 |= (0x3 << 12); /* set frequency */ counter = (PCLK / PWM_FREQ) >> 9; - timers->ch[3].TCNTB = counter; - timers->ch[3].TCMPB = counter / 2; + timers->ch[3].tcntb = counter; + timers->ch[3].tcmpb = counter / 2; /* start timer */ - timers->TCON = (timers->TCON | UPDATE3 | RELOAD3) & ~INVERT3; - timers->TCON = (timers->TCON | START3) & ~UPDATE3; + timers->tcon = (timers->tcon | UPDATE3 | RELOAD3) & ~INVERT3; + timers->tcon = (timers->tcon | START3) & ~UPDATE3; return 0; } if (strcmp (argv[2], "off") == 0) { /* stop timer */ - timers->TCON &= ~(START2 | RELOAD2); + timers->tcon &= ~(START2 | RELOAD2); /* configure pin GPD8 as output and set to 0 */ - gpio->PDCON &= ~(0x3 << 8*2); - gpio->PDCON |= (0x1 << 8*2); - gpio->PDDAT &= ~(1 << 8); + gpio->pdcon &= ~(0x3 << 8*2); + gpio->pdcon |= (0x1 << 8*2); + gpio->pddat &= ~(1 << 8); return 0; } printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]); diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c index 5890624f0f0..426ed9c520b 100644 --- a/board/trab/tsc2000.c +++ b/board/trab/tsc2000.c @@ -50,21 +50,21 @@ void tsc2000_spi_init(void) int i; /* Configure I/O ports. */ - gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000; - gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000; - gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000; - gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000; + gpio->pdcon = (gpio->pdcon & 0xF3FFFF) | 0x040000; + gpio->pgcon = (gpio->pgcon & 0x0F3FFF) | 0x008000; + gpio->pgcon = (gpio->pgcon & 0x0CFFFF) | 0x020000; + gpio->pgcon = (gpio->pgcon & 0x03FFFF) | 0x080000; CLR_CS_TOUCH(); - spi->ch[0].SPPRE = 0x1F; /* Baud-rate ca. 514kHz */ - spi->ch[0].SPPIN = 0x01; /* SPI-MOSI holds Level after last bit */ - spi->ch[0].SPCON = 0x1A; /* Polling, Prescaler, Master, CPOL=0, + spi->ch[0].sppre = 0x1F; /* Baud-rate ca. 514kHz */ + spi->ch[0].sppin = 0x01; /* SPI-MOSI holds Level after last bit */ + spi->ch[0].spcon = 0x1A; /* Polling, Prescaler, Master, CPOL=0, CPHA=1 */ /* Dummy byte ensures clock to be low. */ for (i = 0; i < 10; i++) { - spi->ch[0].SPTDAT = 0xFF; + spi->ch[0].sptdat = 0xFF; } spi_wait_transmit_done(); } @@ -74,7 +74,8 @@ void spi_wait_transmit_done(void) { struct s3c24x0_spi * const spi = s3c24x0_get_base_spi(); - while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */ + while (!(spi->ch[0].spsta & 0x01)) /* wait until transfer is done */ + ; } @@ -85,13 +86,13 @@ void tsc2000_write(unsigned short reg, unsigned short data) SET_CS_TOUCH(); command = reg; - spi->ch[0].SPTDAT = (command & 0xFF00) >> 8; + spi->ch[0].sptdat = (command & 0xFF00) >> 8; spi_wait_transmit_done(); - spi->ch[0].SPTDAT = (command & 0x00FF); + spi->ch[0].sptdat = (command & 0x00FF); spi_wait_transmit_done(); - spi->ch[0].SPTDAT = (data & 0xFF00) >> 8; + spi->ch[0].sptdat = (data & 0xFF00) >> 8; spi_wait_transmit_done(); - spi->ch[0].SPTDAT = (data & 0x00FF); + spi->ch[0].sptdat = (data & 0x00FF); spi_wait_transmit_done(); CLR_CS_TOUCH(); @@ -106,19 +107,19 @@ unsigned short tsc2000_read (unsigned short reg) SET_CS_TOUCH(); command = 0x8000 | reg; - spi->ch[0].SPTDAT = (command & 0xFF00) >> 8; + spi->ch[0].sptdat = (command & 0xFF00) >> 8; spi_wait_transmit_done(); - spi->ch[0].SPTDAT = (command & 0x00FF); + spi->ch[0].sptdat = (command & 0x00FF); spi_wait_transmit_done(); - spi->ch[0].SPTDAT = 0xFF; + spi->ch[0].sptdat = 0xFF; spi_wait_transmit_done(); - data = spi->ch[0].SPRDAT; - spi->ch[0].SPTDAT = 0xFF; + data = spi->ch[0].sprdat; + spi->ch[0].sptdat = 0xFF; spi_wait_transmit_done(); CLR_CS_TOUCH(); - return (spi->ch[0].SPRDAT & 0x0FF) | (data << 8); + return (spi->ch[0].sprdat & 0x0FF) | (data << 8); } diff --git a/board/trab/tsc2000.h b/board/trab/tsc2000.h index 0b6253f6566..f3cecb928e2 100644 --- a/board/trab/tsc2000.h +++ b/board/trab/tsc2000.h @@ -29,45 +29,49 @@ #define _TSC2000_H_ /* temperature channel multiplexer definitions */ -#define CON_MUX0 (gpio->PCCON = (gpio->PCCON & 0x0FFFFFCFF) | 0x00000100) -#define CLR_MUX0 (gpio->PCDAT &= 0x0FFEF) -#define SET_MUX0 (gpio->PCDAT |= 0x00010) +#define CON_MUX0 (gpio->pccon = (gpio->pccon & 0x0FFFFFCFF) | 0x00000100) +#define CLR_MUX0 (gpio->pcdat &= 0x0FFEF) +#define SET_MUX0 (gpio->pcdat |= 0x00010) -#define CON_MUX1 (gpio->PCCON = (gpio->PCCON & 0x0FFFFF3FF) | 0x00000400) -#define CLR_MUX1 (gpio->PCDAT &= 0x0FFDF) -#define SET_MUX1 (gpio->PCDAT |= 0x00020) +#define CON_MUX1 (gpio->pccon = (gpio->pccon & 0x0FFFFF3FF) | 0x00000400) +#define CLR_MUX1 (gpio->pcdat &= 0x0FFDF) +#define SET_MUX1 (gpio->pcdat |= 0x00020) -#define CON_MUX1_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFFCFFF) | 0x00001000) -#define CLR_MUX1_ENABLE (gpio->PCDAT |= 0x00040) -#define SET_MUX1_ENABLE (gpio->PCDAT &= 0x0FFBF) +#define CON_MUX1_ENABLE (gpio->pccon = (gpio->pccon & 0x0FFFFCFFF) | 0x00001000) +#define CLR_MUX1_ENABLE (gpio->pcdat |= 0x00040) +#define SET_MUX1_ENABLE (gpio->pcdat &= 0x0FFBF) -#define CON_MUX2_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFF3FFF) | 0x00004000) -#define CLR_MUX2_ENABLE (gpio->PCDAT |= 0x00080) -#define SET_MUX2_ENABLE (gpio->PCDAT &= 0x0FF7F) +#define CON_MUX2_ENABLE (gpio->pccon = (gpio->pccon & 0x0FFFF3FFF) | 0x00004000) +#define CLR_MUX2_ENABLE (gpio->pcdat |= 0x00080) +#define SET_MUX2_ENABLE (gpio->pcdat &= 0x0FF7F) -#define CON_MUX3_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFCFFFF) | 0x00010000) -#define CLR_MUX3_ENABLE (gpio->PCDAT |= 0x00100) -#define SET_MUX3_ENABLE (gpio->PCDAT &= 0x0FEFF) +#define CON_MUX3_ENABLE (gpio->pccon = (gpio->pccon & 0x0FFFCFFFF) | 0x00010000) +#define CLR_MUX3_ENABLE (gpio->pcdat |= 0x00100) +#define SET_MUX3_ENABLE (gpio->pcdat &= 0x0FEFF) -#define CON_MUX4_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFF3FFFF) | 0x00040000) -#define CLR_MUX4_ENABLE (gpio->PCDAT |= 0x00200) -#define SET_MUX4_ENABLE (gpio->PCDAT &= 0x0FDFF) +#define CON_MUX4_ENABLE (gpio->pccon = (gpio->pccon & 0x0FFF3FFFF) | 0x00040000) +#define CLR_MUX4_ENABLE (gpio->pcdat |= 0x00200) +#define SET_MUX4_ENABLE (gpio->pcdat &= 0x0FDFF) -#define CON_SEL_TEMP_V_0 (gpio->PCCON = (gpio->PCCON & 0x0FFCFFFFF) | 0x00100000) -#define CLR_SEL_TEMP_V_0 (gpio->PCDAT &= 0x0FBFF) -#define SET_SEL_TEMP_V_0 (gpio->PCDAT |= 0x00400) +#define CON_SEL_TEMP_V_0 (gpio->pccon = (gpio->pccon & 0x0FFCFFFFF) | \ + 0x00100000) +#define CLR_SEL_TEMP_V_0 (gpio->pcdat &= 0x0FBFF) +#define SET_SEL_TEMP_V_0 (gpio->pcdat |= 0x00400) -#define CON_SEL_TEMP_V_1 (gpio->PCCON = (gpio->PCCON & 0x0FF3FFFFF) | 0x00400000) -#define CLR_SEL_TEMP_V_1 (gpio->PCDAT &= 0x0F7FF) -#define SET_SEL_TEMP_V_1 (gpio->PCDAT |= 0x00800) +#define CON_SEL_TEMP_V_1 (gpio->pccon = (gpio->pccon & 0x0FF3FFFFF) | \ + 0x00400000) +#define CLR_SEL_TEMP_V_1 (gpio->pcdat &= 0x0F7FF) +#define SET_SEL_TEMP_V_1 (gpio->pcdat |= 0x00800) -#define CON_SEL_TEMP_V_2 (gpio->PCCON = (gpio->PCCON & 0x0FCFFFFFF) | 0x01000000) -#define CLR_SEL_TEMP_V_2 (gpio->PCDAT &= 0x0EFFF) -#define SET_SEL_TEMP_V_2 (gpio->PCDAT |= 0x01000) +#define CON_SEL_TEMP_V_2 (gpio->pccon = (gpio->pccon & 0x0FCFFFFFF) | \ + 0x01000000) +#define CLR_SEL_TEMP_V_2 (gpio->pcdat &= 0x0EFFF) +#define SET_SEL_TEMP_V_2 (gpio->pcdat |= 0x01000) -#define CON_SEL_TEMP_V_3 (gpio->PCCON = (gpio->PCCON & 0x0F3FFFFFF) | 0x04000000) -#define CLR_SEL_TEMP_V_3 (gpio->PCDAT &= 0x0DFFF) -#define SET_SEL_TEMP_V_3 (gpio->PCDAT |= 0x02000) +#define CON_SEL_TEMP_V_3 (gpio->pccon = (gpio->pccon & 0x0F3FFFFFF) | \ + 0x04000000) +#define CLR_SEL_TEMP_V_3 (gpio->pcdat &= 0x0DFFF) +#define SET_SEL_TEMP_V_3 (gpio->pcdat |= 0x02000) /* TSC2000 register definition */ #define TSC2000_REG_X ((0 << 11) | (0 << 5)) @@ -130,7 +134,7 @@ static inline void SET_CS_TOUCH(void) { struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - gpio->PDDAT &= 0x5FF; + gpio->pddat &= 0x5FF; } @@ -138,7 +142,7 @@ static inline void CLR_CS_TOUCH(void) { struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - gpio->PDDAT |= 0x200; + gpio->pddat |= 0x200; } #endif /* _TSC2000_H_ */ diff --git a/board/trab/vfd.c b/board/trab/vfd.c index b7eb8cce03c..9a2b1ba1a5a 100644 --- a/board/trab/vfd.c +++ b/board/trab/vfd.c @@ -365,12 +365,12 @@ int vfd_init_clocks (void) /* try to determine display type from the value * defined by pull-ups */ - gpio->PCUP = (gpio->PCUP & 0xFFF0); /* activate GPC0...GPC3 pullups */ - gpio->PCCON = (gpio->PCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as inputs */ + gpio->pcup = (gpio->pcup & 0xFFF0); /* activate GPC0...GPC3 pullups */ + gpio->pccon = (gpio->pccon & 0xFFFFFF00); /* cfg GPC0...GPC3 inputs */ /* allow signals to settle */ for (i=0; i<10000; i++) /* udelay isn't working yet at this point! */ __asm__("NOP"); - vfd_board_id = (~gpio->PCDAT) & 0x000F; /* read GPC0...GPC3 port pins */ + vfd_board_id = (~gpio->pcdat) & 0x000F; /* read GPC0...GPC3 port pins */ VFD_DISABLE; /* activate blank for the vfd */ @@ -381,39 +381,39 @@ int vfd_init_clocks (void) /* If new board revision, then use PWM 3 as cpld-clock */ /* Enable 500 Hz timer for fill level sensor to operate properly */ /* Configure TOUT3 as functional pin, disable pull-up */ - gpio->PDCON &= ~0x30000; - gpio->PDCON |= 0x20000; - gpio->PDUP |= (1 << 8); + gpio->pdcon &= ~0x30000; + gpio->pdcon |= 0x20000; + gpio->pdup |= (1 << 8); /* Configure the prescaler */ - timers->TCFG0 &= ~0xff00; - timers->TCFG0 |= 0x0f00; + timers->tcfg0 &= ~0xff00; + timers->tcfg0 |= 0x0f00; /* Select MUX input (divider) for timer3 (1/16) */ - timers->TCFG1 &= ~0xf000; - timers->TCFG1 |= 0x3000; + timers->tcfg1 &= ~0xf000; + timers->tcfg1 |= 0x3000; /* Enable autoreload and set the counter and compare * registers to values for the 500 Hz clock * (for a given prescaler (15) and divider (16)): * counter = (66000000 / 500) >> 9; */ - timers->ch[3].TCNTB = 0x101; - timers->ch[3].TCMPB = 0x101 / 2; + timers->ch[3].tcntb = 0x101; + timers->ch[3].tcmpb = 0x101 / 2; /* Start timer */ - timers->TCON = (timers->TCON | UPDATE3 | RELOAD3) & ~INVERT3; - timers->TCON = (timers->TCON | START3) & ~UPDATE3; + timers->tcon = (timers->tcon | UPDATE3 | RELOAD3) & ~INVERT3; + timers->tcon = (timers->tcon | START3) & ~UPDATE3; } #endif /* If old board revision, then use vm-signal as cpld-clock */ - lcd->LCDCON2 = 0x00FFC000; - lcd->LCDCON3 = 0x0007FF00; - lcd->LCDCON4 = 0x00000000; - lcd->LCDCON5 = 0x00000400; - lcd->LCDCON1 = 0x00000B75; + lcd->lcdcon2 = 0x00FFC000; + lcd->lcdcon3 = 0x0007FF00; + lcd->lcdcon4 = 0x00000000; + lcd->lcdcon5 = 0x00000400; + lcd->lcdcon1 = 0x00000B75; /* VM (GPD1) is used as clock for the CPLD */ - gpio->PDCON = (gpio->PDCON & 0xFFFFFFF3) | 0x00000008; + gpio->pdcon = (gpio->pdcon & 0xFFFFFFF3) | 0x00000008; return 0; } @@ -485,40 +485,44 @@ int drv_vfd_init(void) * see manual S3C2400 */ /* Stopp LCD-Controller */ - lcd->LCDCON1 = 0x00000000; + lcd->lcdcon1 = 0x00000000; /* frame buffer startadr */ - lcd->LCDSADDR1 = gd->fb_base >> 1; + lcd->lcdsaddr1 = gd->fb_base >> 1; /* frame buffer endadr */ - lcd->LCDSADDR2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1; - lcd->LCDSADDR3 = ((256/4)); - lcd->LCDCON2 = 0x000DC000; + lcd->lcdsaddr2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1; + lcd->lcdsaddr3 = ((256/4)); + lcd->lcdcon2 = 0x000DC000; if(gd->vfd_type == VFD_TYPE_MN11236) - lcd->LCDCON2 = 37 << 14; /* MN11236: 38 lines */ + lcd->lcdcon2 = 37 << 14; /* MN11236: 38 lines */ else - lcd->LCDCON2 = 55 << 14; /* T119C: 56 lines */ - lcd->LCDCON3 = 0x0051000A; - lcd->LCDCON4 = 0x00000001; + lcd->lcdcon2 = 55 << 14; /* T119C: 56 lines */ + lcd->lcdcon3 = 0x0051000A; + lcd->lcdcon4 = 0x00000001; if (gd->vfd_type && vfd_inv_data) - lcd->LCDCON5 = 0x000004C0; + lcd->lcdcon5 = 0x000004C0; else - lcd->LCDCON5 = 0x00000440; + lcd->lcdcon5 = 0x00000440; /* Port pins as LCD output */ - gpio->PCCON = (gpio->PCCON & 0xFFFFFF00)| 0x000000AA; - gpio->PDCON = (gpio->PDCON & 0xFFFFFF03)| 0x000000A8; + gpio->pccon = (gpio->pccon & 0xFFFFFF00) | 0x000000AA; + gpio->pdcon = (gpio->pdcon & 0xFFFFFF03) | 0x000000A8; /* Synchronize VFD enable with LCD controller to avoid flicker */ - lcd->LCDCON1 = 0x00000B75; /* Start LCD-Controller */ - while((lcd->LCDCON5 & 0x180000)!=0x100000); /* Wait for end of VSYNC */ - while((lcd->LCDCON5 & 0x060000)!=0x040000); /* Wait for next HSYNC */ - while((lcd->LCDCON5 & 0x060000)==0x040000); - while((lcd->LCDCON5 & 0x060000)!=0x000000); + lcd->lcdcon1 = 0x00000B75; /* Start LCD-Controller */ + while ((lcd->lcdcon5 & 0x180000) != 0x100000) /* Wait for VSYNC end */ + ; + while ((lcd->lcdcon5 & 0x060000) != 0x040000) /* Wait for next HSYNC */ + ; + while ((lcd->lcdcon5 & 0x060000) == 0x040000) + ; + while ((lcd->lcdcon5 & 0x060000) != 0x000000) + ; if(gd->vfd_type) VFD_ENABLE; - debug ("LCDSADDR1: %lX\n", lcd->LCDSADDR1); - debug ("LCDSADDR2: %lX\n", lcd->LCDSADDR2); - debug ("LCDSADDR3: %lX\n", lcd->LCDSADDR3); + debug("LCDSADDR1: %lX\n", lcd->lcdsaddr1); + debug("LCDSADDR2: %lX\n", lcd->lcdsaddr2); + debug("LCDSADDR3: %lX\n", lcd->lcdsaddr3); return 0; } @@ -532,8 +536,8 @@ void disable_vfd (void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); VFD_DISABLE; - gpio->PDCON &= ~0xC; - gpio->PDUP &= ~0x2; + gpio->pdcon &= ~0xC; + gpio->pdup &= ~0x2; } /************************************************************************/ diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index c8371cf730c..ba6f39bee11 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -58,10 +58,10 @@ static int GetI2CSDA(void) struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); #ifdef CONFIG_S3C2410 - return (readl(&gpio->GPEDAT) & 0x8000) >> 15; + return (readl(&gpio->gpedat) & 0x8000) >> 15; #endif #ifdef CONFIG_S3C2400 - return (readl(&gpio->PGDAT) & 0x0020) >> 5; + return (readl(&gpio->pgdat) & 0x0020) >> 5; #endif } @@ -77,10 +77,10 @@ static void SetI2CSCL(int x) struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); #ifdef CONFIG_S3C2410 - writel((readl(&gpio->GPEDAT) & ~0x4000) | (x & 1) << 14, &gpio->GPEDAT); + writel((readl(&gpio->gpedat) & ~0x4000) | (x & 1) << 14, &gpio->gpedat); #endif #ifdef CONFIG_S3C2400 - writel((readl(&gpio->PGDAT) & ~0x0040) | (x & 1) << 6, &gpio->PGDAT); + writel((readl(&gpio->pgdat) & ~0x0040) | (x & 1) << 6, &gpio->pgdat); #endif } @@ -90,26 +90,26 @@ static int WaitForXfer(void) int i; i = I2C_TIMEOUT * 10000; - while (!(readl(&i2c->IICCON) & I2CCON_IRPND) && (i > 0)) { + while (!(readl(&i2c->iiccon) & I2CCON_IRPND) && (i > 0)) { udelay(100); i--; } - return (readl(&i2c->IICCON) & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT; + return (readl(&i2c->iiccon) & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT; } static int IsACK(void) { struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); - return !(readl(&i2c->IICSTAT) & I2CSTAT_NACK); + return !(readl(&i2c->iicstat) & I2CSTAT_NACK); } static void ReadWriteByte(void) { struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c(); - writel(readl(&i2c->IICCON) & ~I2CCON_IRPND, &i2c->IICCON); + writel(readl(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon); } void i2c_init(int speed, int slaveadd) @@ -122,30 +122,30 @@ void i2c_init(int speed, int slaveadd) /* wait for some time to give previous transfer a chance to finish */ i = I2C_TIMEOUT * 1000; - while ((readl(&i2c->IICSTAT) && I2CSTAT_BSY) && (i > 0)) { + while ((readl(&i2c->iicstat) && I2CSTAT_BSY) && (i > 0)) { udelay(1000); i--; } - if ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) || GetI2CSDA() == 0) { + if ((readl(&i2c->iicstat) & I2CSTAT_BSY) || GetI2CSDA() == 0) { #ifdef CONFIG_S3C2410 - ulong old_gpecon = readl(&gpio->GPECON); + ulong old_gpecon = readl(&gpio->gpecon); #endif #ifdef CONFIG_S3C2400 - ulong old_gpecon = readl(&gpio->PGCON); + ulong old_gpecon = readl(&gpio->pgcon); #endif /* bus still busy probably by (most) previously interrupted transfer */ #ifdef CONFIG_S3C2410 /* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */ - writel((readl(&gpio->GPECON) & ~0xF0000000) | 0x10000000, - &gpio->GPECON); + writel((readl(&gpio->gpecon) & ~0xF0000000) | 0x10000000, + &gpio->gpecon); #endif #ifdef CONFIG_S3C2400 /* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */ - writel((readl(&gpio->PGCON) & ~0x00003c00) | 0x00001000, - &gpio->PGCON); + writel((readl(&gpio->pgcon) & ~0x00003c00) | 0x00001000, + &gpio->pgcon); #endif /* toggle I2CSCL until bus idle */ @@ -164,10 +164,10 @@ void i2c_init(int speed, int slaveadd) /* restore pin functions */ #ifdef CONFIG_S3C2410 - writel(old_gpecon, &gpio->GPECON); + writel(old_gpecon, &gpio->gpecon); #endif #ifdef CONFIG_S3C2400 - writel(old_gpecon, &gpio->PGCON); + writel(old_gpecon, &gpio->pgcon); #endif } @@ -183,13 +183,13 @@ void i2c_init(int speed, int slaveadd) /* set prescaler, divisor according to freq, also set * ACKGEN, IRQ */ - writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->IICCON); + writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->iiccon); /* init to SLAVE REVEIVE and set slaveaddr */ - writel(0, &i2c->IICSTAT); - writel(slaveadd, &i2c->IICADD); + writel(0, &i2c->iicstat); + writel(slaveadd, &i2c->iicadd); /* program Master Transmit (and implicit STOP) */ - writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT); + writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat); } @@ -218,47 +218,47 @@ int i2c_transfer(unsigned char cmd_type, /* Check I2C bus idle */ i = I2C_TIMEOUT * 1000; - while ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) && (i > 0)) { + while ((readl(&i2c->iicstat) & I2CSTAT_BSY) && (i > 0)) { udelay(1000); i--; } - if (readl(&i2c->IICSTAT) & I2CSTAT_BSY) + if (readl(&i2c->iicstat) & I2CSTAT_BSY) return I2C_NOK_TOUT; - writel(readl(&i2c->IICCON) | 0x80, &i2c->IICCON); + writel(readl(&i2c->iiccon) | 0x80, &i2c->iiccon); result = I2C_OK; switch (cmd_type) { case I2C_WRITE: if (addr && addr_len) { - writel(chip, &i2c->IICDS); + writel(chip, &i2c->iicds); /* send START */ writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP, - &i2c->IICSTAT); + &i2c->iicstat); i = 0; while ((i < addr_len) && (result == I2C_OK)) { result = WaitForXfer(); - writel(addr[i], &i2c->IICDS); + writel(addr[i], &i2c->iicds); ReadWriteByte(); i++; } i = 0; while ((i < data_len) && (result == I2C_OK)) { result = WaitForXfer(); - writel(data[i], &i2c->IICDS); + writel(data[i], &i2c->iicds); ReadWriteByte(); i++; } } else { - writel(chip, &i2c->IICDS); + writel(chip, &i2c->iicds); /* send START */ writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP, - &i2c->IICSTAT); + &i2c->iicstat); i = 0; while ((i < data_len) && (result = I2C_OK)) { result = WaitForXfer(); - writel(data[i], &i2c->IICDS); + writel(data[i], &i2c->iicds); ReadWriteByte(); i++; } @@ -268,42 +268,42 @@ int i2c_transfer(unsigned char cmd_type, result = WaitForXfer(); /* send STOP */ - writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT); + writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat); ReadWriteByte(); break; case I2C_READ: if (addr && addr_len) { - writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT); - writel(chip, &i2c->IICDS); + writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat); + writel(chip, &i2c->iicds); /* send START */ - writel(readl(&i2c->IICSTAT) | I2C_START_STOP, - &i2c->IICSTAT); + writel(readl(&i2c->iicstat) | I2C_START_STOP, + &i2c->iicstat); result = WaitForXfer(); if (IsACK()) { i = 0; while ((i < addr_len) && (result == I2C_OK)) { - writel(addr[i], &i2c->IICDS); + writel(addr[i], &i2c->iicds); ReadWriteByte(); result = WaitForXfer(); i++; } - writel(chip, &i2c->IICDS); + writel(chip, &i2c->iicds); /* resend START */ writel(I2C_MODE_MR | I2C_TXRX_ENA | - I2C_START_STOP, &i2c->IICSTAT); + I2C_START_STOP, &i2c->iicstat); ReadWriteByte(); result = WaitForXfer(); i = 0; while ((i < data_len) && (result == I2C_OK)) { /* disable ACK for final READ */ if (i == data_len - 1) - writel(readl(&i2c->IICCON) - & ~0x80, &i2c->IICCON); + writel(readl(&i2c->iiccon) + & ~0x80, &i2c->iiccon); ReadWriteByte(); result = WaitForXfer(); - data[i] = readl(&i2c->IICDS); + data[i] = readl(&i2c->iicds); i++; } } else { @@ -311,11 +311,11 @@ int i2c_transfer(unsigned char cmd_type, } } else { - writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT); - writel(chip, &i2c->IICDS); + writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat); + writel(chip, &i2c->iicds); /* send START */ - writel(readl(&i2c->IICSTAT) | I2C_START_STOP, - &i2c->IICSTAT); + writel(readl(&i2c->iicstat) | I2C_START_STOP, + &i2c->iicstat); result = WaitForXfer(); if (IsACK()) { @@ -323,11 +323,11 @@ int i2c_transfer(unsigned char cmd_type, while ((i < data_len) && (result == I2C_OK)) { /* disable ACK for final READ */ if (i == data_len - 1) - writel(readl(&i2c->IICCON) & - ~0x80, &i2c->IICCON); + writel(readl(&i2c->iiccon) & + ~0x80, &i2c->iiccon); ReadWriteByte(); result = WaitForXfer(); - data[i] = readl(&i2c->IICDS); + data[i] = readl(&i2c->iicds); i++; } } else { @@ -336,7 +336,7 @@ int i2c_transfer(unsigned char cmd_type, } /* send STOP */ - writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT); + writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat); ReadWriteByte(); break; diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c index a27d47e5f1f..f70daefbfe1 100644 --- a/drivers/mtd/nand/s3c2410_nand.c +++ b/drivers/mtd/nand/s3c2410_nand.c @@ -69,11 +69,11 @@ static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) chip->IO_ADDR_W = (void *)IO_ADDR_W; if (ctrl & NAND_NCE) - writel(readl(&nand->NFCONF) & ~S3C2410_NFCONF_nFCE, - &nand->NFCONF); + writel(readl(&nand->nfconf) & ~S3C2410_NFCONF_nFCE, + &nand->nfconf); else - writel(readl(&nand->NFCONF) | S3C2410_NFCONF_nFCE, - &nand->NFCONF); + writel(readl(&nand->nfconf) | S3C2410_NFCONF_nFCE, + &nand->nfconf); } if (cmd != NAND_CMD_NONE) @@ -84,7 +84,7 @@ static int s3c2410_dev_ready(struct mtd_info *mtd) { struct s3c2410_nand *nand = s3c2410_get_base_nand(); debugX(1, "dev_ready\n"); - return readl(&nand->NFSTAT) & 0x01; + return readl(&nand->nfstat) & 0x01; } #ifdef CONFIG_S3C2410_NAND_HWECC @@ -92,16 +92,16 @@ void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode) { struct s3c2410_nand *nand = s3c2410_get_base_nand(); debugX(1, "s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode); - writel(readl(&nand->NFCONF) | S3C2410_NFCONF_INITECC, &nand->NFCONF); + writel(readl(&nand->nfconf) | S3C2410_NFCONF_INITECC, &nand->nfconf); } static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) { struct s3c2410_nand *nand = s3c2410_get_base_nand(); - ecc_code[0] = readb(&nand->NFECC); - ecc_code[1] = readb(&nand->NFECC + 1); - ecc_code[2] = readb(&nand->NFECC + 2); + ecc_code[0] = readb(&nand->nfecc); + ecc_code[1] = readb(&nand->nfecc + 1); + ecc_code[2] = readb(&nand->nfecc + 2); debugX(1, "s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n", mtd , ecc_code[0], ecc_code[1], ecc_code[2]); @@ -130,7 +130,7 @@ int board_nand_init(struct nand_chip *nand) debugX(1, "board_nand_init()\n"); - writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON); + writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon); /* initialize hardware */ twrph0 = 3; @@ -141,10 +141,11 @@ int board_nand_init(struct nand_chip *nand) cfg |= S3C2410_NFCONF_TACLS(tacls - 1); cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1); cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1); - writel(cfg, &nand_reg->NFCONF); + writel(cfg, &nand_reg->nfconf); /* initialize nand_chip data structure */ - nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)&nand_reg->NFDATA; + nand->IO_ADDR_R = (void *)&nand_reg->nfdata; + nand->IO_ADDR_W = (void *)&nand_reg->nfdata; nand->select_chip = NULL; diff --git a/drivers/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c index 04de5ca545d..7f02f0585ff 100644 --- a/drivers/rtc/s3c24x0_rtc.c +++ b/drivers/rtc/s3c24x0_rtc.c @@ -49,11 +49,11 @@ static inline void SetRTC_Access(RTC_ACCESS a) switch (a) { case RTC_ENABLE: - writeb(readb(&rtc->RTCCON) | 0x01, &rtc->RTCCON); + writeb(readb(&rtc->rtccon) | 0x01, &rtc->rtccon); break; case RTC_DISABLE: - writeb(readb(&rtc->RTCCON) & ~0x01, &rtc->RTCCON); + writeb(readb(&rtc->rtccon) & ~0x01, &rtc->rtccon); break; } } @@ -71,23 +71,23 @@ int rtc_get(struct rtc_time *tmp) /* read RTC registers */ do { - sec = readb(&rtc->BCDSEC); - min = readb(&rtc->BCDMIN); - hour = readb(&rtc->BCDHOUR); - mday = readb(&rtc->BCDDATE); - wday = readb(&rtc->BCDDAY); - mon = readb(&rtc->BCDMON); - year = readb(&rtc->BCDYEAR); - } while (sec != readb(&rtc->BCDSEC)); + sec = readb(&rtc->bcdsec); + min = readb(&rtc->bcdmin); + hour = readb(&rtc->bcdhour); + mday = readb(&rtc->bcddate); + wday = readb(&rtc->bcdday); + mon = readb(&rtc->bcdmon); + year = readb(&rtc->bcdyear); + } while (sec != readb(&rtc->bcdsec)); /* read ALARM registers */ - a_sec = readb(&rtc->ALMSEC); - a_min = readb(&rtc->ALMMIN); - a_hour = readb(&rtc->ALMHOUR); - a_date = readb(&rtc->ALMDATE); - a_mon = readb(&rtc->ALMMON); - a_year = readb(&rtc->ALMYEAR); - a_armed = readb(&rtc->RTCALM); + a_sec = readb(&rtc->almsec); + a_min = readb(&rtc->almmin); + a_hour = readb(&rtc->almhour); + a_date = readb(&rtc->almdate); + a_mon = readb(&rtc->almmon); + a_year = readb(&rtc->almyear); + a_armed = readb(&rtc->rtcalm); /* disable access to RTC registers */ SetRTC_Access(RTC_DISABLE); @@ -145,13 +145,13 @@ int rtc_set(struct rtc_time *tmp) SetRTC_Access(RTC_ENABLE); /* write RTC registers */ - writeb(sec, &rtc->BCDSEC); - writeb(min, &rtc->BCDMIN); - writeb(hour, &rtc->BCDHOUR); - writeb(mday, &rtc->BCDDATE); - writeb(wday, &rtc->BCDDAY); - writeb(mon, &rtc->BCDMON); - writeb(year, &rtc->BCDYEAR); + writeb(sec, &rtc->bcdsec); + writeb(min, &rtc->bcdmin); + writeb(hour, &rtc->bcdhour); + writeb(mday, &rtc->bcddate); + writeb(wday, &rtc->bcdday); + writeb(mon, &rtc->bcdmon); + writeb(year, &rtc->bcdyear); /* disable access to RTC registers */ SetRTC_Access(RTC_DISABLE); @@ -163,8 +163,8 @@ void rtc_reset(void) { struct s3c24x0_rtc *rtc = s3c24x0_get_base_rtc(); - writeb((readb(&rtc->RTCCON) & ~0x06) | 0x08, &rtc->RTCCON); - writeb(readb(&rtc->RTCCON) & ~(0x08 | 0x01), &rtc->RTCCON); + writeb((readb(&rtc->rtccon) & ~0x06) | 0x08, &rtc->rtccon); + writeb(readb(&rtc->rtccon) & ~(0x08 | 0x01), &rtc->rtccon); } #endif diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c index 8a3e30209cf..f42b15e45ec 100644 --- a/drivers/serial/serial_s3c24x0.c +++ b/drivers/serial/serial_s3c24x0.c @@ -101,7 +101,7 @@ void _serial_setbrg(const int dev_index) /* value is calculated so : (int)(PCLK/16./baudrate) -1 */ reg = get_PCLK() / (16 * gd->baudrate) - 1; - writel(reg, &uart->UBRDIV); + writel(reg, &uart->ubrdiv); for (i = 0; i < 100; i++) /* Delay */ ; } @@ -131,26 +131,26 @@ static int serial_init_dev(const int dev_index) #endif /* FIFO enable, Tx/Rx FIFO clear */ - writel(0x07, &uart->UFCON); - writel(0x0, &uart->UMCON); + writel(0x07, &uart->ufcon); + writel(0x0, &uart->umcon); /* Normal,No parity,1 stop,8 bit */ - writel(0x3, &uart->ULCON); + writel(0x3, &uart->ulcon); /* * tx=level,rx=edge,disable timeout int.,enable rx error int., * normal,interrupt or polling */ - writel(0x245, &uart->UCON); + writel(0x245, &uart->ucon); #ifdef CONFIG_HWFLOW - writel(0x1, &uart->UMCON); /* RTS up */ + writel(0x1, &uart->umcon); /* rts up */ #endif /* FIXME: This is sooooooooooooooooooo ugly */ #if defined(CONFIG_ARCH_GTA02_v1) || defined(CONFIG_ARCH_GTA02_v2) /* we need auto hw flow control on the gsm and gps port */ if (dev_index == 0 || dev_index == 1) - writel(0x10, &uart->UMCON); + writel(0x10, &uart->umcon); #endif _serial_setbrg(dev_index); @@ -176,10 +176,10 @@ int _serial_getc(const int dev_index) { struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index); - while (!(readl(&uart->UTRSTAT) & 0x1)) + while (!(readl(&uart->utrstat) & 0x1)) /* wait for character to arrive */ ; - return readb(&uart->URXH) & 0xff; + return readb(&uart->urxh) & 0xff; } #if defined(CONFIG_SERIAL_MULTI) @@ -237,15 +237,15 @@ void _serial_putc(const char c, const int dev_index) return; #endif - while (!(readl(&uart->UTRSTAT) & 0x2)) + while (!(readl(&uart->utrstat) & 0x2)) /* wait for room in the tx FIFO */ ; #ifdef CONFIG_HWFLOW - while (hwflow && !(readl(&uart->UMSTAT) & 0x1)) + while (hwflow && !(readl(&uart->umstat) & 0x1)) /* Wait for CTS up */ ; #endif - writeb(c, &uart->UTXH); + writeb(c, &uart->utxh); /* If \n, also do \r */ if (c == '\n') @@ -272,7 +272,7 @@ int _serial_tstc(const int dev_index) { struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index); - return readl(&uart->UTRSTAT) & 0x1; + return readl(&uart->utrstat) & 0x1; } #if defined(CONFIG_SERIAL_MULTI) From 51fd9a7e01bd9ee5e09341131e157397c05b8a14 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Wed, 20 Oct 2010 09:23:06 +0200 Subject: [PATCH 104/116] MX51: add CONFIG_SYS_TEXT_BASE to vision2 board, use general ld script Recent patch changed TEXT_BASE to CONFIG_SYS_TEXT_BASE and vision2 board was not updated. Signed-off-by: Stefano Babic --- board/ttcontrol/vision2/config.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/board/ttcontrol/vision2/config.mk b/board/ttcontrol/vision2/config.mk index 59f3367cfc9..952037e8060 100644 --- a/board/ttcontrol/vision2/config.mk +++ b/board/ttcontrol/vision2/config.mk @@ -20,6 +20,6 @@ # MA 02111-1307 USA # -LDSCRIPT = $(CPUDIR)/$(SOC)/u-boot.lds -TEXT_BASE = 0x97800000 +CONFIG_SYS_TEXT_BASE = 0x97800000 IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage_hynix.cfg +ALL += $(obj)u-boot.imx From 95707aaa9ef2dd84649c257cdcf563641322c4d3 Mon Sep 17 00:00:00 2001 From: Jason Liu Date: Thu, 21 Oct 2010 09:11:47 +0800 Subject: [PATCH 105/116] MX5:use common u-boot.lds of cpu layer Remove u-boot.lds from mx5 and use the common u-boot.lds of cpu layer. This patch also fix the building errors: arch/arm/cpu/armv7/start.o: In function `_rel_dyn_start_ofs': arch/arm/cpu/armv7/start.S:283: undefined reference to `__rel_dyn_start' arch/arm/cpu/armv7/start.o: In function `_rel_dyn_end_ofs': arch/arm/cpu/armv7/start.S:283: undefined reference to `__rel_dyn_end' arch/arm/cpu/armv7/start.o: In function `_dynsym_start_ofs': arch/arm/cpu/armv7/start.S:283: undefined reference to `__dynsym_start' Signed-off-by: Jason Liu --- arch/arm/cpu/armv7/mx5/u-boot.lds | 73 ------------------------------- board/freescale/mx51evk/config.mk | 1 - 2 files changed, 74 deletions(-) delete mode 100644 arch/arm/cpu/armv7/mx5/u-boot.lds diff --git a/arch/arm/cpu/armv7/mx5/u-boot.lds b/arch/arm/cpu/armv7/mx5/u-boot.lds deleted file mode 100644 index 55d6599b41c..00000000000 --- a/arch/arm/cpu/armv7/mx5/u-boot.lds +++ /dev/null @@ -1,73 +0,0 @@ -/* - * January 2004 - Changed to support H4 device - * Copyright (c) 2004 Texas Instruments - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * (C) Copyright 2009 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - arch/arm/cpu/armv7/start.o - *(.text) - } - - . = ALIGN(4); - .rodata : { *(.rodata) } - - . = ALIGN(4); - .data : { - *(.data) - __datarel_start = .; - *(.data.rel) - __datarelrolocal_start = .; - *(.data.rel.ro.local) - __datarellocal_start = .; - *(.data.rel.local) - __datarelro_start = .; - *(.data.rel.ro) - } - - __got_start = .; - . = ALIGN(4); - .got : { *(.got) } - __got_end = .; - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = ALIGN(4); - __bss_start = .; - .bss : { *(.bss) } - _end = .; -} diff --git a/board/freescale/mx51evk/config.mk b/board/freescale/mx51evk/config.mk index 716fca9d229..6e90671d0e8 100644 --- a/board/freescale/mx51evk/config.mk +++ b/board/freescale/mx51evk/config.mk @@ -20,7 +20,6 @@ # MA 02111-1307 USA # -LDSCRIPT = $(CPUDIR)/$(SOC)/u-boot.lds CONFIG_SYS_TEXT_BASE = 0x97800000 IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg ALL += $(obj)u-boot.imx From 81129d07a0e9f6e28029170b082d6f8810f72712 Mon Sep 17 00:00:00 2001 From: Matthias Weisser Date: Wed, 27 Oct 2010 16:34:38 +0200 Subject: [PATCH 106/116] imx25: Fix reset This patch fixes the reset command on imx25. The watchdog registers are 16 bits in size and not 32. This patch also adds the service register codes as constants. Signed-off-by: Matthias Weisser --- arch/arm/cpu/arm926ejs/mx25/reset.c | 8 ++++---- arch/arm/include/asm/arch-mx25/imx-regs.h | 14 ++++++++------ 2 files changed, 12 insertions(+), 10 deletions(-) diff --git a/arch/arm/cpu/arm926ejs/mx25/reset.c b/arch/arm/cpu/arm926ejs/mx25/reset.c index 1e33150eb9f..1a436830810 100644 --- a/arch/arm/cpu/arm926ejs/mx25/reset.c +++ b/arch/arm/cpu/arm926ejs/mx25/reset.c @@ -43,14 +43,14 @@ void reset_cpu (ulong ignored) { struct wdog_regs *regs = (struct wdog_regs *)IMX_WDT_BASE; /* Disable watchdog and set Time-Out field to 0 */ - writel (0x00000000, ®s->wcr); + writew(0, ®s->wcr); /* Write Service Sequence */ - writel (0x00005555, ®s->wsr); - writel (0x0000AAAA, ®s->wsr); + writew(WSR_UNLOCK1, ®s->wsr); + writew(WSR_UNLOCK2, ®s->wsr); /* Enable watchdog */ - writel (WCR_WDE, ®s->wcr); + writew(WCR_WDE, ®s->wcr); while (1) ; } diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index f709bd8e0e6..f5a2929e220 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -108,11 +108,11 @@ struct gpt_regs { /* Watchdog Timer (WDOG) registers */ struct wdog_regs { - u32 wcr; /* Control */ - u32 wsr; /* Service */ - u32 wrsr; /* Reset Status */ - u32 wicr; /* Interrupt Control */ - u32 wmcr; /* Misc Control */ + u16 wcr; /* Control */ + u16 wsr; /* Service */ + u16 wrsr; /* Reset Status */ + u16 wicr; /* Interrupt Control */ + u16 wmcr; /* Misc Control */ }; /* IIM control registers */ @@ -308,7 +308,9 @@ struct iim_regs { #define GPT_CTRL_TEN 1 /* Timer enable */ /* WDOG enable */ -#define WCR_WDE 0x04 +#define WCR_WDE 0x04 +#define WSR_UNLOCK1 0x5555 +#define WSR_UNLOCK2 0xAAAA /* FUSE bank offsets */ #define IIM0_MAC 0x1a From 9a0044183a148ab553e296848cbfa4338fc83323 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Thu, 28 Oct 2010 11:08:52 +0200 Subject: [PATCH 107/116] MX51: remove warning in clock.c The patch removes the warning: clock.c:291: warning: initialization from incompatible pointer type after constification of args[] Signed-off-by: Stefano Babic --- arch/arm/cpu/armv7/mx5/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index 00f649cf487..0b04a8819a4 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -269,7 +269,7 @@ u32 imx_get_fecclk(void) /* * Dump some core clockes. */ -int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { u32 freq; From 888b4f435f74ae8ba7a5df552b119ba25c7438dc Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 27 Oct 2010 23:36:04 +0800 Subject: [PATCH 108/116] mx51evk: Fix 2 hours reset issue The mx51evk u-boot has an issue that system will get reset every 2 hours. MC13892 has an inside charge timer which expires in 120 minutes. If ICHRG and CHGAUTOB are not set properly, this timer expiration will get system power recycled. Since mx51evk has no Li-Ion battery on board, the patch sets ICHRG in externally powered mode and sets CHGAUTOB bit to avoid automatic charging, so that system will not get reset by this timer expiration. The patch also corrects the bit field definition of register 48 (Charger 0) per latest MC13892 Reference Manual. Signed-off-by: Shawn Guo --- board/freescale/mx51evk/mx51evk.c | 8 ++++---- include/mc13892.h | 16 ++++++++-------- 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index c8d7d3964e3..0b58b1b332a 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -188,10 +188,10 @@ static void power_init(void) val &= ~PWGT2SPIEN; pmic_reg_write(REG_POWER_MISC, val); - /* Write needed to update Charger 0 */ - pmic_reg_write(REG_CHARGE, VCHRG0 | VCHRG1 | VCHRG2 | - ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | ICHRGTR0 | - OVCTRL1 | UCHEN | CHRGLEDEN | CYCLB); + /* Externally powered */ + val = pmic_reg_read(REG_CHARGE); + val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB; + pmic_reg_write(REG_CHARGE, val); /* power up the system first */ pmic_reg_write(REG_POWER_MISC, PWUP); diff --git a/include/mc13892.h b/include/mc13892.h index 791e3ec8784..61c3e6e621c 100644 --- a/include/mc13892.h +++ b/include/mc13892.h @@ -29,24 +29,24 @@ /* REG_CHARGE */ -#define VCHRG0 0 +#define VCHRG0 (1 << 0) #define VCHRG1 (1 << 1) #define VCHRG2 (1 << 2) #define ICHRG0 (1 << 3) #define ICHRG1 (1 << 4) #define ICHRG2 (1 << 5) #define ICHRG3 (1 << 6) -#define ICHRGTR0 (1 << 7) -#define ICHRGTR1 (1 << 8) -#define ICHRGTR2 (1 << 9) +#define TREN (1 << 7) +#define ACKLPB (1 << 8) +#define THCHKB (1 << 9) #define FETOVRD (1 << 10) #define FETCTRL (1 << 11) #define RVRSMODE (1 << 13) -#define OVCTRL0 (1 << 15) -#define OVCTRL1 (1 << 16) -#define UCHEN (1 << 17) +#define PLIM0 (1 << 15) +#define PLIM1 (1 << 16) +#define PLIMDIS (1 << 17) #define CHRGLEDEN (1 << 18) -#define CHRGRAWPDEN (1 << 19) +#define CHGTMRRST (1 << 19) #define CHGRESTART (1 << 20) #define CHGAUTOB (1 << 21) #define CYCLB (1 << 22) From 06982534b65f4ceddd124d0467c89dd7adf6d445 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 25 Oct 2010 23:20:30 +0800 Subject: [PATCH 109/116] mx51evk: consolidate env for mmcboot and netboot This patch is to consolidate default mx51evk env for two primary boot modes, mmcboot and netboot. It also cleans some unused env like netdev, uboot and redundant env like loadaddr since CONFIG_LOADADDR already defines it. Signed-off-by: Shawn Guo --- include/configs/mx51evk.h | 50 +++++++++++++++++++++++++++++---------- 1 file changed, 38 insertions(+), 12 deletions(-) diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index f31fc4e6c02..a39260c3f45 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -125,18 +125,42 @@ #define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "uboot_addr=0xa0000000\0" \ - "uboot=u-boot.bin\0" \ - "loadaddr=0x90800000\0" \ - "bootargs_base=setenv bootargs console=tty "\ - "console=ttymxc0,${baudrate}\0"\ - "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\ - "bootcmd=run bootcmd_net\0" \ - "bootcmd_net=run bootargs_base bootargs_nfs; " \ - "tftpboot ${loadaddr} ${kernel}; bootm\0" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ + "mmcdev=0\0" \ + "mmcpart=2\0" \ + "mmcroot=/dev/mmcblk0p3 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm\0" \ + "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "dhcp ${uimage}; bootm\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan ${mmcdev}; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" #define CONFIG_ARP_TIMEOUT 200UL @@ -144,6 +168,8 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_PROMPT "MX51EVK U-Boot > " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ From 1ab027cbf6536f40348699a7b7bfa8bbedf88c8e Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 28 Oct 2010 10:13:15 +0800 Subject: [PATCH 110/116] mx51evk: support new relocation scheme This patch is to fix build breakage and support new relocation scheme for mx51evk. - Correct IRAM base address and add size definition The IRAM starts from 0x1FFE0000 on final revsion i.mx51 than 0x1FFE8000 which is for older revision. - Include imx-regs.h in mx51evk.h Definitions like CSD0_BASE_ADDR and IRAM_BASE_ADDR can be referred to. - Define CONFIG_SYS_INIT_RAM_ADDR and CONFIG_SYS_INIT_RAM_SIZE They are used to define init RAM layout. - Remove comment for CONFIG_SYS_GBL_DATA_SIZE which has been buried by Wolfgang's commit below 25ddd1fb: Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value Signed-off-by: Shawn Guo --- arch/arm/include/asm/arch-mx5/imx-regs.h | 3 ++- board/freescale/mx51evk/mx51evk.c | 6 +++--- include/configs/mx51evk.h | 12 ++++++++++-- 3 files changed, 15 insertions(+), 6 deletions(-) diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 3ddda401f31..0b6249a9b8b 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -26,7 +26,8 @@ /* * IRAM */ -#define IRAM_BASE_ADDR 0x1FFE8000 /* internal ram */ +#define IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ +#define IRAM_SIZE 0x00020000 /* 128 KB */ /* * Graphics Memory of GPU */ diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 0b58b1b332a..2160d5a49bf 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -52,9 +52,9 @@ u32 get_board_rev(void) int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + PHYS_SDRAM_1_SIZE); return 0; } diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index a39260c3f45..f98438d6373 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -24,11 +24,11 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include /* High Level Configuration Options */ #define CONFIG_MX51 /* in a mx51 */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_MX5_HCLK 24000000 #define CONFIG_SYS_MX5_CLK32 32768 @@ -51,7 +51,6 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) -/* size in bytes reserved for initial data */ #define BOARD_LATE_INIT @@ -200,6 +199,15 @@ #define PHYS_SDRAM_1 CSD0_BASE_ADDR #define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) +#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) +#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + #define CONFIG_SYS_DDR_CLKSEL 0 #define CONFIG_SYS_CLKTL_CBCDR 0x59E35100 From 5842383e25910636d2e9a722f0ef1a2ec7951b36 Mon Sep 17 00:00:00 2001 From: Gray Remlin <[g_remlin@rocketmail.com]> Date: Thu, 28 Oct 2010 19:02:12 +0530 Subject: [PATCH 111/116] kirkwood: guruplug: Relocate NAND environment area Current default options increase u-boot size to overlap the location of the environment in NAND, move environment higher up Signed-off-by: Gray Remlin --- include/configs/guruplug.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 2c2682cfadf..f449da93544 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -72,8 +72,8 @@ * it has to be rounded to sector size */ #define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0x40000 -#define CONFIG_ENV_OFFSET 0x40000 /* env starts here */ +#define CONFIG_ENV_ADDR 0x60000 +#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ /* * Default environment variables From 31d80c77ff672e0202b4ada5215c4666c949ffc2 Mon Sep 17 00:00:00 2001 From: Prafulla Wadaskar Date: Wed, 27 Oct 2010 17:46:06 +0530 Subject: [PATCH 112/116] kirkwood: get rid of config.mk files After moving the definition of CONFIG_SYS_TEXT_BASE to the respective board config files, all Marvell kirkwood board have just a single and common entry in their config.mk files: KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg Replace the only reference to KWD_CONFIG in the top level Makefile by an equivalent setting, and remove all kirkwood config.mk files. Signed-off-by: Wolfgang Denk Cc: Prafulla Wadaskar Cc: Siddarth Gore Cc: Simon Kagstrom Cc: Heiko Schocher Cc: Eric Cooper Acked-by: Wolfgang Denk Signed-off-by: Prafulla Wadaskar --- Makefile | 2 +- board/Marvell/guruplug/config.mk | 27 -------------------- board/Marvell/mv88f6281gtw_ge/config.mk | 28 --------------------- board/Marvell/openrd_base/config.mk | 33 ------------------------- board/Marvell/rd6281a/config.mk | 28 --------------------- board/Marvell/sheevaplug/config.mk | 28 --------------------- board/keymile/km_arm/config.mk | 28 --------------------- include/configs/keymile-common.h | 16 ++++++++++++ include/configs/mv-common.h | 16 ++++++++++++ 9 files changed, 33 insertions(+), 173 deletions(-) delete mode 100644 board/Marvell/guruplug/config.mk delete mode 100644 board/Marvell/mv88f6281gtw_ge/config.mk delete mode 100644 board/Marvell/openrd_base/config.mk delete mode 100644 board/Marvell/rd6281a/config.mk delete mode 100644 board/Marvell/sheevaplug/config.mk delete mode 100644 board/keymile/km_arm/config.mk diff --git a/Makefile b/Makefile index 06c71a2db86..62377c1c0c1 100644 --- a/Makefile +++ b/Makefile @@ -357,7 +357,7 @@ $(obj)u-boot.imx: $(obj)u-boot.bin -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ $(obj)u-boot.kwb: $(obj)u-boot.bin - $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \ + $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \ -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ $(obj)u-boot.sha1: $(obj)u-boot.bin diff --git a/board/Marvell/guruplug/config.mk b/board/Marvell/guruplug/config.mk deleted file mode 100644 index 12d7737bec4..00000000000 --- a/board/Marvell/guruplug/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor -# Written-by: Siddarth Gore -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -CONFIG_SYS_TEXT_BASE = 0x00600000 - -KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg diff --git a/board/Marvell/mv88f6281gtw_ge/config.mk b/board/Marvell/mv88f6281gtw_ge/config.mk deleted file mode 100644 index 761c2bb7413..00000000000 --- a/board/Marvell/mv88f6281gtw_ge/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor -# Written-by: Prafulla Wadaskar -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -CONFIG_SYS_TEXT_BASE = 0x00600000 - -# Kirkwood Boot Image configuration file -KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg diff --git a/board/Marvell/openrd_base/config.mk b/board/Marvell/openrd_base/config.mk deleted file mode 100644 index 5a49280e774..00000000000 --- a/board/Marvell/openrd_base/config.mk +++ /dev/null @@ -1,33 +0,0 @@ -# -# (C) Copyright 2009 -# Net Insight -# Written-by: Simon Kagstrom -# -# Based on sheevaplug: -# (C) Copyright 2009 -# Marvell Semiconductor -# Written-by: Prafulla Wadaskar -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -CONFIG_SYS_TEXT_BASE = 0x00600000 - -# Kirkwood Boot Image configuration file -KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg diff --git a/board/Marvell/rd6281a/config.mk b/board/Marvell/rd6281a/config.mk deleted file mode 100644 index 761c2bb7413..00000000000 --- a/board/Marvell/rd6281a/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor -# Written-by: Prafulla Wadaskar -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -CONFIG_SYS_TEXT_BASE = 0x00600000 - -# Kirkwood Boot Image configuration file -KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg diff --git a/board/Marvell/sheevaplug/config.mk b/board/Marvell/sheevaplug/config.mk deleted file mode 100644 index 761c2bb7413..00000000000 --- a/board/Marvell/sheevaplug/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor -# Written-by: Prafulla Wadaskar -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -CONFIG_SYS_TEXT_BASE = 0x00600000 - -# Kirkwood Boot Image configuration file -KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg diff --git a/board/keymile/km_arm/config.mk b/board/keymile/km_arm/config.mk deleted file mode 100644 index df4828cdc92..00000000000 --- a/board/keymile/km_arm/config.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor -# Prafulla Wadaskar -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, -# MA 02110-1301 USA -# - -CONFIG_SYS_TEXT_BASE = 0x004000000 - -# Kirkwood Boot Image configuration file -KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index 62d21f62866..ccc71c96c0a 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -29,6 +29,22 @@ #define CONFIG_BOOTCOUNT_LIMIT +/* + * By default kwbimage.cfg from board specific folder is used + * If for some board, different configuration file need to be used, + * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file + */ +#ifndef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg +#endif /* CONFIG_SYS_KWD_CONFIG */ + +/* + * CONFIG_SYS_TEXT_BASE can be defined in board specific header file, if needed + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x00400000 +#endif /* CONFIG_SYS_TEXT_BASE */ + /* * Command line configuration. */ diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 2b19a34bb28..e4a81489cf6 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -45,6 +45,22 @@ #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 for kernel */ +/* + * By default kwbimage.cfg from board specific folder is used + * If for some board, different configuration file need to be used, + * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file + */ +#ifndef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg +#endif /* CONFIG_SYS_KWD_CONFIG */ + +/* + * CONFIG_SYS_TEXT_BASE can be defined in board specific header file, if needed + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x00600000 +#endif /* CONFIG_SYS_TEXT_BASE */ + #define CONFIG_I2C_MVTWSI_BASE KW_TWSI_BASE #define MV_UART0_BASE KW_UART0_BASE #define MV_SATA_BASE KW_SATA_BASE From 28e57108a61bd0e554d9847170b8ad9dad093e07 Mon Sep 17 00:00:00 2001 From: Tanmay Upadhyay <[tanmay.upadhyay@einfochips.com]> Date: Thu, 28 Oct 2010 20:06:22 +0530 Subject: [PATCH 113/116] Kirkwood: bugfix: DRAM size initialization If start of any DRAM bank is greater than total DDR size, remaining DDR banks' start address & size were left un-initialized in dram_init function. This could break other functions who uses array 'gd->bd->bi_dram'. Kirkwood network driver is one example. This also stops Linux kernel from booting. v2 - Set start address also to 0. Without this Linux kernel couldn't boot up Signed-off-by: Tanmay Upadhyay --- arch/arm/cpu/arm926ejs/kirkwood/dram.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/cpu/arm926ejs/kirkwood/dram.c b/arch/arm/cpu/arm926ejs/kirkwood/dram.c index 7439c87f681..a4344b82968 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/dram.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/dram.c @@ -81,6 +81,16 @@ int dram_init(void) gd->ram_size += gd->bd->bi_dram[i].size; } + + for (; i < CONFIG_NR_DRAM_BANKS; i++) { + /* If above loop terminated prematurely, we need to set + * remaining banks' start address & size as 0. Otherwise other + * u-boot functions and Linux kernel gets wrong values which + * could result in crash */ + gd->bd->bi_dram[i].start = 0; + gd->bd->bi_dram[i].size = 0; + } + return 0; } From 2e5167ccad93ca9cfa6a2acfab5e4785418e477e Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 28 Oct 2010 20:00:11 +0200 Subject: [PATCH 114/116] Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC By now, the majority of architectures have working relocation support, so the few remaining architectures have become exceptions. To make this more obvious, we make working relocation now the default case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC. Signed-off-by: Wolfgang Denk Tested-by: Heiko Schocher Tested-by: Reinhard Meyer --- arch/arm/include/asm/config.h | 3 --- arch/arm/lib/board.c | 32 ---------------------------- arch/avr32/include/asm/config.h | 2 ++ arch/avr32/lib/board.c | 4 ++-- arch/blackfin/include/asm/config.h | 3 --- arch/i386/include/asm/config.h | 2 -- arch/m68k/include/asm/config.h | 2 ++ arch/m68k/lib/board.c | 4 ++-- arch/microblaze/include/asm/config.h | 3 --- arch/mips/include/asm/config.h | 2 ++ arch/mips/lib/board.c | 4 ++-- arch/nios2/include/asm/config.h | 3 --- arch/powerpc/include/asm/config.h | 3 --- arch/sh/include/asm/config.h | 3 --- arch/sparc/include/asm/config.h | 2 ++ arch/sparc/lib/board.c | 4 ++-- common/cmd_bmp.c | 2 +- common/cmd_bootm.c | 2 +- common/cmd_date.c | 6 +++--- common/cmd_i2c.c | 2 +- common/cmd_nvedit.c | 2 +- common/cmd_onenand.c | 2 +- common/command.c | 2 +- common/dlmalloc.c | 2 +- common/env_common.c | 2 +- common/hush.c | 4 ++-- common/image.c | 8 +++---- common/serial.c | 2 +- common/stdio.c | 4 ++-- disk/part.c | 4 ++-- doc/README.arm-relocation | 5 ++--- drivers/mtd/nand/nand.c | 2 +- drivers/net/phy/miiphybb.c | 2 +- fs/ubifs/ubifs.c | 2 +- include/command.h | 2 +- include/post.h | 2 +- post/post.c | 2 +- 37 files changed, 46 insertions(+), 91 deletions(-) diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h index 4124f0a9922..c60dba26bfa 100644 --- a/arch/arm/include/asm/config.h +++ b/arch/arm/include/asm/config.h @@ -21,9 +21,6 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -/* Relocation to SDRAM works on all ARM boards */ -#define CONFIG_RELOC_FIXUP_WORKS - #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH #endif diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index af9a414b88b..33b369496a1 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -678,15 +678,6 @@ void board_init_r (gd_t *id, ulong dest_addr) ulong malloc_start; #if !defined(CONFIG_SYS_NO_FLASH) ulong flash_size; -#endif -#if !defined(CONFIG_RELOC_FIXUP_WORKS) - extern void malloc_bin_reloc (void); -#if defined(CONFIG_CMD_BMP) - extern void bmp_reloc(void); -#endif -#if defined(CONFIG_CMD_I2C) - extern void i2c_reloc(void); -#endif #endif gd = id; @@ -704,39 +695,16 @@ void board_init_r (gd_t *id, ulong dest_addr) debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr); -#if !defined(CONFIG_RELOC_FIXUP_WORKS) - /* - * We have to relocate the command table manually - */ - fixup_cmdtable(&__u_boot_cmd_start, - (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#if defined(CONFIG_CMD_BMP) - bmp_reloc(); -#endif -#if defined(CONFIG_CMD_I2C) - i2c_reloc(); -#endif -#if defined(CONFIG_CMD_ONENAND) - onenand_reloc(); -#endif -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ - #ifdef CONFIG_LOGBUFFER logbuff_init_ptrs (); #endif #ifdef CONFIG_POST post_output_backlog (); -#ifndef CONFIG_RELOC_FIXUP_WORKS - post_reloc (); -#endif #endif /* The Malloc area is immediately below the monitor copy in DRAM */ malloc_start = dest_addr - TOTAL_MALLOC_LEN; mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN); -#if !defined(CONFIG_RELOC_FIXUP_WORKS) - malloc_bin_reloc (); -#endif #if !defined(CONFIG_SYS_NO_FLASH) puts ("FLASH: "); diff --git a/arch/avr32/include/asm/config.h b/arch/avr32/include/asm/config.h index 049c44eaf84..02fbfb3abfe 100644 --- a/arch/avr32/include/asm/config.h +++ b/arch/avr32/include/asm/config.h @@ -21,4 +21,6 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_NEEDS_MANUAL_RELOC + #endif diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c index 96ccc7fa795..8b56237f189 100644 --- a/arch/avr32/lib/board.c +++ b/arch/avr32/lib/board.c @@ -272,13 +272,13 @@ void board_init_r(gd_t *new_gd, ulong dest_addr) monitor_flash_len = _edata - _text; -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* * We have to relocate the command table manually */ fixup_cmdtable(&__u_boot_cmd_start, (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ +#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ #ifndef CONFIG_ENV_IS_NOWHERE diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h index 34ca68c9d54..388434fea26 100644 --- a/arch/blackfin/include/asm/config.h +++ b/arch/blackfin/include/asm/config.h @@ -13,9 +13,6 @@ # define CONFIG_BFIN_SCRATCH_REG retn #endif -/* Relocation to SDRAM works on all Blackfin boards */ -#define CONFIG_RELOC_FIXUP_WORKS - /* Make sure the structure is properly aligned */ #if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR) # error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned diff --git a/arch/i386/include/asm/config.h b/arch/i386/include/asm/config.h index 1952de79f8a..049c44eaf84 100644 --- a/arch/i386/include/asm/config.h +++ b/arch/i386/include/asm/config.h @@ -21,6 +21,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#define CONFIG_RELOC_FIXUP_WORKS - #endif diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h index ec2cc16beba..51050a39a3e 100644 --- a/arch/m68k/include/asm/config.h +++ b/arch/m68k/include/asm/config.h @@ -21,6 +21,8 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_NEEDS_MANUAL_RELOC + #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH #define CONFIG_SYS_BOOT_GET_CMDLINE diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 976d5bf28af..9a519088582 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -420,13 +420,13 @@ void board_init_r (gd_t *id, ulong dest_addr) monitor_flash_len = (ulong)&__init_end - dest_addr; -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* * We have to relocate the command table manually */ fixup_cmdtable(&__u_boot_cmd_start, (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ +#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ #ifndef CONFIG_ENV_IS_NOWHERE diff --git a/arch/microblaze/include/asm/config.h b/arch/microblaze/include/asm/config.h index 8a9064b3c88..049c44eaf84 100644 --- a/arch/microblaze/include/asm/config.h +++ b/arch/microblaze/include/asm/config.h @@ -21,7 +21,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -/* Relocation to SDRAM works on all Microblaze boards */ -#define CONFIG_RELOC_FIXUP_WORKS - #endif diff --git a/arch/mips/include/asm/config.h b/arch/mips/include/asm/config.h index 049c44eaf84..02fbfb3abfe 100644 --- a/arch/mips/include/asm/config.h +++ b/arch/mips/include/asm/config.h @@ -21,4 +21,6 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_NEEDS_MANUAL_RELOC + #endif diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c index 4a22f7b41c7..f3171241556 100644 --- a/arch/mips/lib/board.c +++ b/arch/mips/lib/board.c @@ -295,13 +295,13 @@ void board_init_r (gd_t *id, ulong dest_addr) monitor_flash_len = (ulong)&uboot_end_data - dest_addr; -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* * We have to relocate the command table manually */ fixup_cmdtable(&__u_boot_cmd_start, (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ +#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ #ifndef CONFIG_ENV_IS_NOWHERE diff --git a/arch/nios2/include/asm/config.h b/arch/nios2/include/asm/config.h index 011d603a4b8..049c44eaf84 100644 --- a/arch/nios2/include/asm/config.h +++ b/arch/nios2/include/asm/config.h @@ -21,7 +21,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -/* Relocation to SDRAM works on all NIOS2 boards */ -#define CONFIG_RELOC_FIXUP_WORKS - #endif diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index a1942ca2bd9..76dedebe67c 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -89,9 +89,6 @@ #define CONFIG_SYS_NUM_TLBCAMS 16 #endif -/* Relocation to SDRAM works on all PPC boards */ -#define CONFIG_RELOC_FIXUP_WORKS - /* Since so many PPC SOCs have a semi-common LBC, define this here */ #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \ defined(CONFIG_MPC83xx) diff --git a/arch/sh/include/asm/config.h b/arch/sh/include/asm/config.h index 978cc92f40a..049c44eaf84 100644 --- a/arch/sh/include/asm/config.h +++ b/arch/sh/include/asm/config.h @@ -21,7 +21,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -/* Relocation to SDRAM works on all sh boards */ -#define CONFIG_RELOC_FIXUP_WORKS - #endif diff --git a/arch/sparc/include/asm/config.h b/arch/sparc/include/asm/config.h index 6ddc3494c6b..7b6f30bd4a8 100644 --- a/arch/sparc/include/asm/config.h +++ b/arch/sparc/include/asm/config.h @@ -21,6 +21,8 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_NEEDS_MANUAL_RELOC + #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c index 4a6041f51ca..ab31cfb50ad 100644 --- a/arch/sparc/lib/board.c +++ b/arch/sparc/lib/board.c @@ -252,13 +252,13 @@ void board_init_f(ulong bootflag) post_run(NULL, POST_ROM | post_bootmode_get(0)); #endif -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* * We have to relocate the command table manually */ fixup_cmdtable(&__u_boot_cmd_start, (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); -#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */ +#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ #if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP) puts("AMBA:\n"); diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c index 6fa8a150235..f2a48f751c2 100644 --- a/common/cmd_bmp.c +++ b/common/cmd_bmp.c @@ -137,7 +137,7 @@ static cmd_tbl_t cmd_bmp_sub[] = { U_BOOT_CMD_MKENT(display, 5, 0, do_bmp_display, "", ""), }; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC void bmp_reloc(void) { fixup_cmdtable(cmd_bmp_sub, ARRAY_SIZE(cmd_bmp_sub)); } diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index ce3c77c6157..1a024f168f7 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -590,7 +590,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong load_end = 0; int ret; boot_os_fn *boot_fn; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC static int relocated = 0; /* relocate boot function table */ diff --git a/common/cmd_date.c b/common/cmd_date.c index 50b42402673..8dbf16d32a1 100644 --- a/common/cmd_date.c +++ b/common/cmd_date.c @@ -35,10 +35,10 @@ const char *weekdays[] = { "Sun", "Mon", "Tues", "Wednes", "Thurs", "Fri", "Satur", }; -#ifdef CONFIG_RELOC_FIXUP_WORKS -#define RELOC(a) a -#else +#ifdef CONFIG_NEEDS_MANUAL_RELOC #define RELOC(a) ((typeof(a))((unsigned long)(a) + gd->reloc_off)) +#else +#define RELOC(a) a #endif int mk_date (char *, struct rtc_time *); diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 0a0cfceb45c..c272b0dd4f7 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1284,7 +1284,7 @@ static cmd_tbl_t cmd_i2c_sub[] = { U_BOOT_CMD_MKENT(speed, 1, 1, do_i2c_bus_speed, "", ""), }; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC void i2c_reloc(void) { fixup_cmdtable(cmd_i2c_sub, ARRAY_SIZE(cmd_i2c_sub)); } diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 3d30c321d5b..3fd8abc157f 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -837,7 +837,7 @@ static cmd_tbl_t cmd_env_sub[] = { U_BOOT_CMD_MKENT(set, CONFIG_SYS_MAXARGS, 0, do_env_set, "", ""), }; -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) void env_reloc(void) { fixup_cmdtable(cmd_env_sub, ARRAY_SIZE(cmd_env_sub)); diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c index 5550b40b81d..33108f1b34a 100644 --- a/common/cmd_onenand.c +++ b/common/cmd_onenand.c @@ -525,7 +525,7 @@ static cmd_tbl_t cmd_onenand_sub[] = { U_BOOT_CMD_MKENT(markbad, CONFIG_SYS_MAXARGS, 0, do_onenand_markbad, "", ""), }; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC void onenand_reloc(void) { fixup_cmdtable(cmd_onenand_sub, ARRAY_SIZE(cmd_onenand_sub)); } diff --git a/common/command.c b/common/command.c index d47d719779f..0020eacf5c4 100644 --- a/common/command.c +++ b/common/command.c @@ -466,7 +466,7 @@ int cmd_get_data_size(char* arg, int default_size) } #endif -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) DECLARE_GLOBAL_DATA_PTR; void fixup_cmdtable(cmd_tbl_t *cmdtp, int size) diff --git a/common/dlmalloc.c b/common/dlmalloc.c index fce7a762b1e..4871f4b0990 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1491,7 +1491,7 @@ static mbinptr av_[NAV * 2 + 2] = { IAV(120), IAV(121), IAV(122), IAV(123), IAV(124), IAV(125), IAV(126), IAV(127) }; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC void malloc_bin_reloc (void) { unsigned long *p = (unsigned long *)(&av_[2]); diff --git a/common/env_common.c b/common/env_common.c index 5acda4d49ed..a276efc6347 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -227,7 +227,7 @@ int env_import(const char *buf, int check) void env_relocate (void) { -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) extern void env_reloc(void); env_reloc(); diff --git a/common/hush.c b/common/hush.c index 4dd9513b036..2188fd4ac8d 100644 --- a/common/hush.c +++ b/common/hush.c @@ -3268,7 +3268,7 @@ int parse_file_outer(void) } #ifdef __U_BOOT__ -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC static void u_boot_hush_reloc(void) { unsigned long addr; @@ -3290,7 +3290,7 @@ int u_boot_hush_start(void) top_vars->next = 0; top_vars->flg_export = 0; top_vars->flg_read_only = 1; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC u_boot_hush_reloc(); #endif } diff --git a/common/image.c b/common/image.c index 89c10b8596e..42f5b79cf2e 100644 --- a/common/image.c +++ b/common/image.c @@ -520,7 +520,7 @@ char *get_table_entry_name (table_entry_t *table, char *msg, int id) { for (; table->id >= 0; ++table) { if (table->id == id) -#if defined(USE_HOSTCC) || defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(USE_HOSTCC) || !defined(CONFIG_NEEDS_MANUAL_RELOC) return table->lname; #else return table->lname + gd->reloc_off; @@ -585,10 +585,10 @@ int get_table_entry_id (table_entry_t *table, fprintf (stderr, "\n"); #else for (t = table; t->id >= 0; ++t) { -#ifdef CONFIG_RELOC_FIXUP_WORKS - if (t->sname && strcmp(t->sname, name) == 0) -#else +#ifdef CONFIG_NEEDS_MANUAL_RELOC if (t->sname && strcmp(t->sname + gd->reloc_off, name) == 0) +#else + if (t->sname && strcmp(t->sname, name) == 0) #endif return (t->id); } diff --git a/common/serial.c b/common/serial.c index c3323ea51ac..051ae4e1d22 100644 --- a/common/serial.c +++ b/common/serial.c @@ -99,7 +99,7 @@ struct serial_device *default_serial_console(void) __attribute__((weak, alias("_ int serial_register (struct serial_device *dev) { -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC dev->init += gd->reloc_off; dev->setbrg += gd->reloc_off; dev->getc += gd->reloc_off; diff --git a/common/stdio.c b/common/stdio.c index 25013693f7d..ab7c5abde1b 100644 --- a/common/stdio.c +++ b/common/stdio.c @@ -193,7 +193,7 @@ int stdio_deregister(char *devname) int stdio_init (void) { -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* already relocated for current ARM implementation */ ulong relocation_offset = gd->reloc_off; int i; @@ -203,7 +203,7 @@ int stdio_init (void) stdio_names[i] = (char *) (((ulong) stdio_names[i]) + relocation_offset); } -#endif /* !CONFIG_RELOC_FIXUP_WORKS */ +#endif /* CONFIG_NEEDS_MANUAL_RELOC */ /* Initialize the list */ INIT_LIST_HEAD(&(devs.list)); diff --git a/disk/part.c b/disk/part.c index 2b63db6c75f..13723f23b31 100644 --- a/disk/part.c +++ b/disk/part.c @@ -81,13 +81,13 @@ block_dev_desc_t *get_dev(char* ifname, int dev) char *name; name = drvr->name; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC name += gd->reloc_off; #endif while (name) { name = drvr->name; reloc_get_dev = drvr->get_dev; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC name += gd->reloc_off; reloc_get_dev += gd->reloc_off; #endif diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation index dc7be7e42e4..2f91d0ac43f 100644 --- a/doc/README.arm-relocation +++ b/doc/README.arm-relocation @@ -36,15 +36,14 @@ At lib level: At config level: - Define CONFIG_RELOC_FIXUP_WORKS. Undefine CONFIG_SYS_ARM_WITHOUT_RELOC * WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING * Boards which are not fixed to support relocation will be REMOVED! -Eventually, CONFIG_SYS_ARM_WITHOUT_RELOC and CONFIG_RELOC_FIXUP_WORKS will -disappear and boards which have to migrated to relocation will disappear too. +Eventually, CONFIG_SYS_ARM_WITHOUT_RELOC will disappear and boards +which have to migrated to relocation will disappear too. ----------------------------------------------------------------------------- diff --git a/drivers/mtd/nand/nand.c b/drivers/mtd/nand/nand.c index 47d6872fd03..c0e068ab7d5 100644 --- a/drivers/mtd/nand/nand.c +++ b/drivers/mtd/nand/nand.c @@ -54,7 +54,7 @@ static void nand_init_chip(struct mtd_info *mtd, struct nand_chip *nand, if (nand_scan(mtd, maxchips) == 0) { if (!mtd->name) mtd->name = (char *)default_nand_name; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC else mtd->name += gd->reloc_off; #endif diff --git a/drivers/net/phy/miiphybb.c b/drivers/net/phy/miiphybb.c index 1045cf1ba98..49a1f5fb49f 100644 --- a/drivers/net/phy/miiphybb.c +++ b/drivers/net/phy/miiphybb.c @@ -127,7 +127,7 @@ void bb_miiphy_init(void) int i; for (i = 0; i < bb_miiphy_buses_num; i++) { -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) /* Relocate the hook pointers*/ BB_MII_RELOCATE(bb_miiphy_buses[i].init, gd->reloc_off); BB_MII_RELOCATE(bb_miiphy_buses[i].mdio_active, gd->reloc_off); diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c index 3fc79909eaa..1cc31a968dd 100644 --- a/fs/ubifs/ubifs.c +++ b/fs/ubifs/ubifs.c @@ -121,7 +121,7 @@ static int __init compr_init(struct ubifs_compressor *compr) { ubifs_compressors[compr->compr_type] = compr; -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC ubifs_compressors[compr->compr_type]->name += gd->reloc_off; ubifs_compressors[compr->compr_type]->capi_name += gd->reloc_off; ubifs_compressors[compr->compr_type]->decompress += gd->reloc_off; diff --git a/include/command.h b/include/command.h index 5c146162337..46a9ec4c4ca 100644 --- a/include/command.h +++ b/include/command.h @@ -125,7 +125,7 @@ cmd_tbl_t __u_boot_cmd_##name Struct_Section = {#name, maxargs, rep, cmd, usage} #endif /* CONFIG_SYS_LONGHELP */ -#if !defined(CONFIG_RELOC_FIXUP_WORKS) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) void fixup_cmdtable(cmd_tbl_t *cmdtp, int size); #endif #endif /* __COMMAND_H */ diff --git a/include/post.h b/include/post.h index abe47da53bf..957ce3b1616 100644 --- a/include/post.h +++ b/include/post.h @@ -137,7 +137,7 @@ void post_output_backlog ( void ); int post_run (char *name, int flags); int post_info (char *name); int post_log (char *format, ...); -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC void post_reloc (void); #endif unsigned long post_time_ms (unsigned long base); diff --git a/post/post.c b/post/post.c index 8a9fd0d2ec1..1b7f2aa075e 100644 --- a/post/post.c +++ b/post/post.c @@ -422,7 +422,7 @@ int post_log (char *format, ...) return 0; } -#ifndef CONFIG_RELOC_FIXUP_WORKS +#ifdef CONFIG_NEEDS_MANUAL_RELOC void post_reloc (void) { unsigned int i; From a9aa3926295df759306258e5e24cace414f53b67 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 28 Oct 2010 20:35:36 +0200 Subject: [PATCH 115/116] Drop support for CONFIG_SYS_ARM_WITHOUT_RELOC When this define was introduced, the idea was to provide a soft migration path for ARM boards to get adapted to the new relocation support. However, other recent changes led to a different implementation (ELF relocation), where this no longer works. By now CONFIG_SYS_ARM_WITHOUT_RELOC does not only not help any more, but it actually hurts because it obfuscates the actual code by sprinkling it with lots of dead and non-working debris. So let's make a clean cut and drop CONFIG_SYS_ARM_WITHOUT_RELOC. Signed-off-by: Wolfgang Denk Tested-by: Heiko Schocher Tested-by: Reinhard Meyer --- arch/arm/config.mk | 5 - arch/arm/cpu/arm1136/start.S | 127 -------------- arch/arm/cpu/arm1176/start.S | 214 ------------------------ arch/arm/cpu/arm720t/start.S | 105 ------------ arch/arm/cpu/arm920t/start.S | 144 ---------------- arch/arm/cpu/arm925t/start.S | 121 -------------- arch/arm/cpu/arm926ejs/orion5x/dram.c | 15 -- arch/arm/cpu/arm926ejs/start.S | 96 ----------- arch/arm/cpu/arm946es/start.S | 85 ---------- arch/arm/cpu/arm_intcm/start.S | 87 ---------- arch/arm/cpu/armv7/omap3/emif4.c | 24 --- arch/arm/cpu/armv7/omap3/sdrc.c | 28 ---- arch/arm/cpu/armv7/omap4/board.c | 5 - arch/arm/cpu/armv7/start.S | 113 ------------- arch/arm/cpu/ixp/start.S | 203 ----------------------- arch/arm/cpu/lh7a40x/start.S | 113 ------------- arch/arm/cpu/pxa/start.S | 28 +--- arch/arm/cpu/s3c44b0/start.S | 85 ---------- arch/arm/cpu/sa1100/start.S | 88 ---------- arch/arm/include/asm/global_data.h | 2 - arch/arm/include/asm/u-boot-arm.h | 6 - arch/arm/lib/board.c | 228 -------------------------- arch/arm/lib/cache-cp15.c | 19 --- arch/arm/lib/interrupts.c | 6 - board/davinci/common/misc.c | 10 -- board/keymile/km_arm/km_arm.c | 15 -- board/ttcontrol/vision2/vision2.c | 14 -- common/cmd_bdinfo.c | 2 - doc/README.arm-relocation | 7 - doc/feature-removal-schedule.txt | 27 --- include/configs/imx31_litekit.h | 1 - include/configs/jornada.h | 1 - include/configs/vision2.h | 5 - nand_spl/nand_boot.c | 2 +- nand_spl/nand_boot_fsl_nfc.c | 2 +- 35 files changed, 10 insertions(+), 2023 deletions(-) diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 21c1e33e674..4e165bfda4e 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -33,9 +33,6 @@ STANDALONE_LOAD_ADDR = 0xc100000 endif endif -ifdef CONFIG_SYS_ARM_WITHOUT_RELOC -PLATFORM_CPPFLAGS += -DCONFIG_SYS_ARM_WITHOUT_RELOC -endif PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__ # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: @@ -68,9 +65,7 @@ endif endif LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds -ifndef CONFIG_SYS_ARM_WITHOUT_RELOC # needed for relocation ifndef CONFIG_NAND_SPL PLATFORM_LDFLAGS += -pie endif -endif diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index d70ca1d515d..9f172b625dd 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -132,14 +132,11 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: .word 0x0badc0de -#endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* * the actual reset code */ @@ -318,112 +315,6 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - -#ifdef CONFIG_OMAP2420H4 - /* Copy vectors to mask ROM indirect addr */ - adr r0, _start /* r0 <- current position of code */ - add r0, r0, #4 /* skip reset vector */ - mov r2, #64 /* r2 <- size to copy */ - add r2, r0, r2 /* r2 <- source end address */ - mov r1, #SRAM_OFFSET0 /* build vect addr */ - mov r3, #SRAM_OFFSET1 - add r1, r1, r3 - mov r3, #SRAM_OFFSET2 - add r1, r1, r3 -next: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - bne next /* loop until equal */ - bl cpy_clk_code /* put dpll adjust code behind vectors */ -#endif - /* the mask ROM code should have PLL and others stable */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ -#ifndef CONFIG_PRELOADER - beq stack_setup -#endif /* CONFIG_PRELOADER */ - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ -#ifdef CONFIG_PRELOADER - sub sp, r0, #128 /* leave 32 words for abort-stack */ -#else - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ -#endif /* CONFIG_PRELOADER */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - adr r2, _start - ldr r0, _bss_start_ofs /* find start of bss segment */ - add r0, r0, r2 - ldr r1, _bss_end_ofs /* stop here */ - add r1, r1, r2 - mov r2, #0x00000000 /* clear */ - -#ifndef CONFIG_PRELOADER -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - bne clbss_l -#endif - - ldr r0, _start_armboot_ofs - adr r1, _start - add r0, r0, r1 - ldr pc, r0 - -_start_armboot_ofs: -#ifdef CONFIG_NAND_SPL - .word nand_boot - _start -#else -#ifdef CONFIG_ONENAND_IPL - .word start_oneboot - _start -#else - .word start_armboot - _start -#endif /* CONFIG_ONENAND_IPL */ -#endif /* CONFIG_NAND_SPL */ - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -508,13 +399,7 @@ cpu_init_crit: sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort stack -#else - adr r2, _start - sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#endif ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -545,13 +430,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter in banked mode) -#else - adr r13, _start @ setup our mode stack (enter in banked mode) - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr @@ -567,13 +446,7 @@ cpu_init_crit: .macro get_bad_stack_swi sub r13, r13, #4 @ space on current stack for scratch reg. str r0, [r13] @ save R0's value. -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) ldr r0, IRQ_STACK_START_IN @ get data regions start -#else - ldr r0, _armboot_start @ get data regions start - sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r0, r0, #(GENERATED_GBL_DATA_SIZE+8) @ move past gbl and a couple spots for abort stack -#endif str lr, [r0] @ save caller lr in position 0 of saved stack mrs r0, spsr @ get the spsr str lr, [r0, #4] @ save spsr in position 1 of saved stack diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 7f32db78742..1a2e5aa37e4 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -108,12 +108,6 @@ _TEXT_BASE: _TEXT_PHY_BASE: .word CONFIG_SYS_PHY_UBOOT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. * Subtracting _start from them lets the linker put their @@ -157,7 +151,6 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -419,188 +412,6 @@ _board_init_r_ofs: .word board_init_r - _start #endif -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0, cpsr - bic r0, r0, #0x3f - orr r0, r0, #0xd3 - msr cpsr, r0 - -/* - ************************************************************************* - * - * CPU_init_critical registers - * - * setup important registers - * setup memory timing - * - ************************************************************************* - */ - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -cpu_init_crit: - /* - * When booting from NAND - it has definitely been a reset, so, no need - * to flush caches and disable the MMU - */ -#ifndef CONFIG_NAND_SPL - /* - * flush v4 I/D caches - */ - mov r0, #0 - mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ - mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ - - /* - * disable MMU stuff and caches - */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) - bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) - orr r0, r0, #0x00000002 @ set bit 2 (A) Align - orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache - - /* Prepare to disable the MMU */ - adr r2, mmu_disable_phys - sub r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_SYS_TEXT_BASE) - b mmu_disable - - .align 5 - /* Run in a single cache-line */ -mmu_disable: - mcr p15, 0, r0, c1, c0, 0 - nop - nop - mov pc, r2 -mmu_disable_phys: - -#ifdef CONFIG_DISABLE_TCM - /* - * Disable the TCMs - */ - mrc p15, 0, r0, c0, c0, 2 /* Return TCM details */ - cmp r0, #0 - beq skip_tcmdisable - mov r1, #0 - mov r2, #1 - tst r0, r2 - mcrne p15, 0, r1, c9, c1, 1 /* Disable Instruction TCM if present*/ - tst r0, r2, LSL #16 - mcrne p15, 0, r1, c9, c1, 0 /* Disable Data TCM if present*/ -skip_tcmdisable: -#endif -#endif - -#ifdef CONFIG_PERIPORT_REMAP - /* Peri port setup */ - ldr r0, =CONFIG_PERIPORT_BASE - orr r0, r0, #CONFIG_PERIPORT_SIZE - mcr p15,0,r0,c15,c2,4 -#endif - - /* - * Go setup Memory and board specific bits prior to relocation. - */ - bl lowlevel_init /* go setup pll,mux,memory */ - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - -#ifdef CONFIG_ENABLE_MMU -enable_mmu: - /* enable domain access */ - ldr r5, =0x0000ffff - mcr p15, 0, r5, c3, c0, 0 /* load domain access register */ - - /* Set the TTB register */ - ldr r0, _mmu_table_base - ldr r1, =CONFIG_SYS_PHY_UBOOT_BASE - ldr r2, =0xfff00000 - bic r0, r0, r2 - orr r1, r0, r1 - mcr p15, 0, r1, c2, c0, 0 - - /* Enable the MMU */ - mrc p15, 0, r0, c1, c0, 0 - orr r0, r0, #1 /* Set CR_M to enable MMU */ - - /* Prepare to enable the MMU */ - adr r1, skip_hw_init - and r1, r1, #0x3fc - ldr r2, _TEXT_BASE - ldr r3, =0xfff00000 - and r2, r2, r3 - orr r2, r2, r1 - b mmu_enable - - .align 5 - /* Run in a single cache-line */ -mmu_enable: - - mcr p15, 0, r0, c1, c0, 0 - nop - nop - mov pc, r2 -skip_hw_init: -#endif - - /* Set up the stack */ -stack_setup: - ldr r0, =CONFIG_SYS_UBOOT_BASE /* base of copy in DRAM */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0 /* clear */ - -clbss_l: - str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - -#ifndef CONFIG_NAND_SPL - ldr pc, _start_armboot - -_start_armboot: - .word start_armboot -#else - b nand_boot -/* .word nand_boot*/ -#endif - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - #ifdef CONFIG_ENABLE_MMU _mmu_table_base: .word mmu_table @@ -687,14 +498,7 @@ phy_last_jump: /* Save user registers (now in svc mode) r0-r12 */ stmia sp, {r0 - r12} -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - /* set base 2 words into abort stack */ - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) -#else ldr r2, IRQ_STACK_START_IN -#endif /* get values for "aborted" pc and cpsr (into parm regs) */ ldmia r2, {r2 - r3} /* grab pointer to old stack */ @@ -709,16 +513,7 @@ phy_last_jump: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - /* setup our mode stack (enter in banked mode) */ - ldr r13, _armboot_start - /* move past malloc pool */ - sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) - /* move to reserved a couple spots for abort stack */ - sub r13, r13, #(GENERATED_GBL_DATA_SIZE + 8) -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif /* save caller lr in position 0 of saved stack */ str lr, [r13] @@ -743,16 +538,7 @@ phy_last_jump: sub r13, r13, #4 /* save R0's value. */ str r0, [r13] -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - /* get data regions start */ - ldr r0, _armboot_start - /* move past malloc pool */ - sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) - /* move past gbl and a couple spots for abort stack */ - sub r0, r0, #(GENERATED_GBL_DATA_SIZE + 8) -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif /* save caller lr in position 0 of saved stack */ str lr, [r0] /* get the spsr */ diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 41c1519efef..b94ecb43539 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -79,12 +79,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -108,7 +102,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -264,92 +257,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0x13 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifdef CONFIG_LPC2292 - bl lowlevel_init -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - -#if CONFIG_SYS_TEXT_BASE -#ifndef CONFIG_LPC2292 /* already done in lowlevel_init */ - ldr r2, =0x0 /* Relocate the exception vectors */ - cmp r1, r2 /* and associated data to address */ - ldmneia r0!, {r3-r10} /* 0x0. Do nothing if CONFIG_SYS_TEXT_BASE is */ - stmneia r2!, {r3-r10} /* 0x0. Copy the first 15 words. */ - ldmneia r0, {r3-r9} - stmneia r2, {r3-r9} - adrne r0, _start /* restore r0 */ -#endif /* !CONFIG_LPC2292 */ -#endif - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -606,13 +513,7 @@ lock_loop: stmia sp, {r0 - r12} @ Calling r0-r12 add r8, sp, #S_PC -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0 add r0, sp, #S_FRAME_SIZE @ restore sp_SVC @@ -643,13 +544,7 @@ lock_loop: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index f0274b1f82a..08d4e7bc3df 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -75,12 +75,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -104,7 +98,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -316,127 +309,6 @@ _nand_boot: .word nand_boot _board_init_r: .word board_init_r #endif -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual start code - */ - -start_code: - /* - * set the cpu to SVC32 mode - */ - mrs r0, cpsr - bic r0, r0, #0x1f - orr r0, r0, #0xd3 - msr cpsr, r0 - - bl coloured_LED_init - bl red_LED_on - -#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) - /* - * relocate exception table - */ - ldr r0, =_start - ldr r1, =0x0 - mov r2, #16 -copyex: - subs r2, r2, #1 - ldr r3, [r0], #4 - str r3, [r1], #4 - bne copyex -#endif - -#ifdef CONFIG_S3C24X0 - /* turn off the watchdog */ - -# if defined(CONFIG_S3C2400) -# define pWTCON 0x15300000 -# define INTMSK 0x14400008 /* Interupt-Controller base addresses */ -# define CLKDIVN 0x14800014 /* clock divisor register */ -#else -# define pWTCON 0x53000000 -# define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ -# define INTSUBMSK 0x4A00001C -# define CLKDIVN 0x4C000014 /* clock divisor register */ -# endif - - ldr r0, =pWTCON - mov r1, #0x0 - str r1, [r0] - - /* - * mask all IRQs by setting all bits in the INTMR - default - */ - mov r1, #0xffffffff - ldr r0, =INTMSK - str r1, [r0] -# if defined(CONFIG_S3C2410) - ldr r1, =0x3ff - ldr r0, =INTSUBMSK - str r1, [r0] -# endif - - /* FCLK:HCLK:PCLK = 1:2:4 */ - /* default FCLK is 120 MHz ! */ - ldr r0, =CLKDIVN - mov r1, #3 - str r1, [r0] -#endif /* CONFIG_S3C24X0 */ - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -525,15 +397,7 @@ cpu_init_crit: .macro bad_save_user_regs sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Calling r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE) - sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - /* set base 2 words into abort stack */ - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r3} @ get pc, cpsr add r0, sp, #S_FRAME_SIZE @ restore sp_SVC @@ -565,15 +429,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE) - sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) - /* reserve a couple spots in abort stack */ - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index 2ad2df847ee..6792a22affe 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -85,12 +85,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -114,7 +108,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -305,108 +298,6 @@ _nand_boot: .word nand_boot _board_init_r: .word board_init_r #endif -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * Set up 925T mode - */ - mov r1, #0x81 /* Set ARM925T configuration. */ - mcr p15, 0, r1, c15, c1, 0 /* Write ARM925T configuration register. */ - - /* - * turn off the watchdog, unlock/diable sequence - */ - mov r1, #0xF5 - ldr r0, =WDTIM_MODE - strh r1, [r0] - mov r1, #0xA0 - strh r1, [r0] - - /* - * mask all IRQs by setting all bits in the INTMR - default - */ - mov r1, #0xffffffff - ldr r0, =REG_IHL1_MIR - str r1, [r0] - ldr r0, =REG_IHL2_MIR - str r1, [r0] - - /* - * wait for dpll to lock - */ - ldr r0, =CK_DPLL1 - mov r1, #0x10 - strh r1, [r0] -poll1: - ldrh r1, [r0] - ands r1, r1, #0x01 - beq poll1 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -489,13 +380,7 @@ cpu_init_crit: sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -526,13 +411,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr diff --git a/arch/arm/cpu/arm926ejs/orion5x/dram.c b/arch/arm/cpu/arm926ejs/orion5x/dram.c index c5c8ab7e4d8..b7492820990 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/dram.c +++ b/arch/arm/cpu/arm926ejs/orion5x/dram.c @@ -49,20 +49,6 @@ u32 orion5x_sdram_bar(enum memory_bank bank) result = winregs[bank].base; return result; } -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = orion5x_sdram_bar(i); - gd->bd->bi_dram[i].size = get_ram_size( - (volatile long *) (gd->bd->bi_dram[i].start), - CONFIG_MAX_RAM_BANK_SIZE); - } - return 0; -} -#else int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -83,4 +69,3 @@ void dram_init_banksize (void) CONFIG_MAX_RAM_BANK_SIZE); } } -#endif diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 7397882b59e..4f689c1ef5e 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -145,7 +145,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -307,89 +306,6 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - ldr r3, _bss_start_ofs /* r3 <- _bss_start - _start */ - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub sp, r0, #128 /* leave 32 words for abort-stack */ -#ifndef CONFIG_PRELOADER - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif -#endif /* CONFIG_PRELOADER */ - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - adr r2, _start - ldr r0, _bss_start_ofs /* find start of bss segment */ - add r0, r0, r2 - ldr r1, _bss_end_ofs /* stop here */ - add r1, r1, r2 - mov r2, #0x00000000 /* clear */ - -#ifndef CONFIG_PRELOADER -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - bl coloured_LED_init - bl red_LED_on -#endif /* CONFIG_PRELOADER */ - - ldr r0, _start_armboot_ofs - adr r1, _start - add r0, r0, r1 - ldr pc, r0 - -_start_armboot_ofs: -#ifdef CONFIG_NAND_SPL - .word nand_boot - _start -#else - .word start_armboot - _start -#endif /* CONFIG_NAND_SPL */ -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -474,13 +390,7 @@ cpu_init_crit: @ carve out a frame on current user stack sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - adr r2, _start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif @ get values for "aborted" pc and cpsr (into parm regs) ldmia r2, {r2 - r3} add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -512,13 +422,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - adr r13, _start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 22af2fae95f..7378edc41cc 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -89,12 +89,6 @@ _fiq: _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -118,7 +112,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -273,72 +266,6 @@ _nand_boot: .word nand_boot _board_init_r: .word board_init_r #endif -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - bne clbss_l - - ldr pc, _start_armboot - -_start_armboot: - .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -424,13 +351,7 @@ cpu_init_crit: sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif @ get values for "aborted" pc and cpsr (into parm regs) ldmia r2, {r2 - r3} add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -462,13 +383,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index a420f44ff5f..2240f3a524a 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -87,12 +87,6 @@ _fiq: _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE /* address of _start in the linked image */ -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -116,7 +110,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -268,74 +261,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/* - * the actual reset code - */ -.globl reset -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* pc relative address of label */ - ldr r1, _TEXT_BASE /* linked image address of label */ - cmp r0, r1 /* test if we run from flash or RAM */ - beq stack_setup /* ifeq we are in the RAM copy */ - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: - .word start_armboot - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -400,13 +325,7 @@ cpu_init_crit: sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif @ get values for "aborted" pc and cpsr (into parm regs) ldmia r2, {r2 - r3} add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -438,13 +357,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c index da2cd900130..0870857ede4 100644 --- a/arch/arm/cpu/armv7/omap3/emif4.c +++ b/arch/arm/cpu/armv7/omap3/emif4.c @@ -136,29 +136,6 @@ void do_emif4_init(void) * dram_init - * - Sets uboots idea of sdram size */ -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - DECLARE_GLOBAL_DATA_PTR; - unsigned int size0 = 0, size1 = 0; - - size0 = get_sdr_cs_size(CS0); - /* - * If a second bank of DDR is attached to CS1 this is - * where it can be started. Early init code will init - * memory on CS0. - */ - if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) - size1 = get_sdr_cs_size(CS1); - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size0; - gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); - gd->bd->bi_dram[1].size = size1; - - return 0; -} -#else int dram_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -190,7 +167,6 @@ void dram_init_banksize (void) gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); gd->bd->bi_dram[1].size = size1; } -#endif /* * mem_init() - diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c index 6c419f5b93d..c75aa1d11ca 100644 --- a/arch/arm/cpu/armv7/omap3/sdrc.c +++ b/arch/arm/cpu/armv7/omap3/sdrc.c @@ -163,33 +163,6 @@ void do_sdrc_init(u32 cs, u32 early) * dram_init - * - Sets uboots idea of sdram size */ -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - DECLARE_GLOBAL_DATA_PTR; - unsigned int size0 = 0, size1 = 0; - - size0 = get_sdr_cs_size(CS0); - /* - * If a second bank of DDR is attached to CS1 this is - * where it can be started. Early init code will init - * memory on CS0. - */ - if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) { - do_sdrc_init(CS1, NOT_EARLY); - make_cs1_contiguous(); - - size1 = get_sdr_cs_size(CS1); - } - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size0; - gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); - gd->bd->bi_dram[1].size = size1; - - return 0; -} -#else int dram_init(void) { DECLARE_GLOBAL_DATA_PTR; @@ -225,7 +198,6 @@ void dram_init_banksize (void) gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); gd->bd->bi_dram[1].size = size1; } -#endif /* * mem_init - diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c index 24a66f5b946..e7651d2dd5b 100644 --- a/arch/arm/cpu/armv7/omap4/board.c +++ b/arch/arm/cpu/armv7/omap4/board.c @@ -102,12 +102,7 @@ int dram_init(void) { DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - gd->bd->bi_dram[0].start = 0x80000000; - gd->bd->bi_dram[0].size = sdram_size(); -#else gd->ram_size = sdram_size(); -#endif return 0; } diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index bdf2fad3802..4a0710c96d4 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -70,12 +70,6 @@ _end_vect: _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -99,7 +93,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -295,94 +288,6 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0, cpsr - bic r0, r0, #0x1f - orr r0, r0, #0xd3 - msr cpsr,r0 - -#if (CONFIG_OMAP34XX) - /* Copy vectors to mask ROM indirect addr */ - adr r0, _start @ r0 <- current position of code - add r0, r0, #4 @ skip reset vector - mov r2, #64 @ r2 <- size to copy - add r2, r0, r2 @ r2 <- source end address - mov r1, #SRAM_OFFSET0 @ build vect addr - mov r3, #SRAM_OFFSET1 - add r1, r1, r3 - mov r3, #SRAM_OFFSET2 - add r1, r1, r3 -next: - ldmia r0!, {r3 - r10} @ copy from source address [r0] - stmia r1!, {r3 - r10} @ copy to target address [r1] - cmp r0, r2 @ until source end address [r2] - bne next @ loop until equal */ -#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_ONENAND_BOOT) - /* No need to copy/exec the clock code - DPLL adjust already done - * in NAND/oneNAND Boot. - */ - bl cpy_clk_code @ put dpll adjust code behind vectors -#endif /* NAND Boot */ -#endif - /* the mask ROM code should have PLL and others stable */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: @ relocate U-Boot to RAM - adr r0, _start @ r0 <- current position of code - ldr r1, _TEXT_BASE @ test if we run from flash or RAM - cmp r0, r1 @ don't reloc during debug - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 @ r2 <- size of armboot - add r2, r0, r2 @ r2 <- source end address - -copy_loop: @ copy 32 bytes at a time - ldmia r0!, {r3 - r10} @ copy from source address [r0] - stmia r1!, {r3 - r10} @ copy to target address [r1] - cmp r0, r2 @ until source end address [r2] - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE @ upper 128 KiB: relocated uboot - sub r0, r0, #CONFIG_SYS_MALLOC_LEN @ malloc area - sub r0, r0, #GENERATED_GBL_DATA_SIZE @ bdinfo -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 @ leave 3 words for abort-stack - bic sp, sp, #7 @ 8-byte alignment for ABI compliance - - /* Clear BSS (if any). Is below tx (watch load addr - need space) */ -clear_bss: - ldr r0, _bss_start @ find start of bss segment - ldr r1, _bss_end @ stop here - mov r2, #0x00000000 @ clear value -clbss_l: - str r2, [r0] @ clear BSS location - cmp r0, r1 @ are we at the end yet - add r0, r0, #4 @ increment clear index pointer - bne clbss_l @ keep clearing till at end - - ldr pc, _start_armboot @ jump to C code - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /************************************************************************* * * CPU_init_critical registers @@ -464,14 +369,8 @@ cpu_init_crit: @ user stack stmia sp, {r0 - r12} @ Save user registers (now in @ svc mode) r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE + 8) @ set base 2 words into abort -#else ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort @ stack -#endif ldmia r2, {r2 - r3} @ get values for "aborted" pc @ and cpsr (into parm regs) add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -507,14 +406,8 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack (enter - sub r13, r13, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r13, r13, #(GENERATED_GBL_DATA_SIZE + 8) @ move to reserved a couple -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter @ in banked mode) -#endif str lr, [r13] @ save caller lr in position 0 @ of saved stack @@ -535,14 +428,8 @@ cpu_init_crit: sub r13, r13, #4 @ space on current stack for @ scratch reg. str r0, [r13] @ save R0's value. -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r0, _armboot_start @ get data regions start - sub r0, r0, #(CONFIG_SYS_MALLOC_LEN) @ move past malloc pool - sub r0, r0, #(GENERATED_GBL_DATA_SIZE + 8) @ move past gbl and a couple -#else ldr r0, IRQ_STACK_START_IN @ get data regions start @ spots for abort stack -#endif str lr, [r0] @ save caller lr in position 0 @ of saved stack mrs r0, spsr @ get the spsr diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index a2560d4c2ad..0269207bb29 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -98,12 +98,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -127,7 +121,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -394,190 +387,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/****************************************************************************/ -/* */ -/* the actual reset code */ -/* */ -/****************************************************************************/ - -reset: - /* disable mmu, set big-endian */ - mov r0, #0xf8 - mcr p15, 0, r0, c1, c0, 0 - CPWAIT r0 - - /* invalidate I & D caches & BTB */ - mcr p15, 0, r0, c7, c7, 0 - CPWAIT r0 - - /* invalidate I & Data TLB */ - mcr p15, 0, r0, c8, c7, 0 - CPWAIT r0 - - /* drain write and fill buffers */ - mcr p15, 0, r0, c7, c10, 4 - CPWAIT r0 - - /* disable write buffer coalescing */ - mrc p15, 0, r0, c1, c0, 1 - orr r0, r0, #1 - mcr p15, 0, r0, c1, c0, 1 - CPWAIT r0 - - /* set EXP CS0 to the optimum timing */ - ldr r1, =CONFIG_SYS_EXP_CS0 - ldr r2, =IXP425_EXP_CS0 - str r1, [r2] - - /* make sure flash is visible at 0 */ -#if 0 - ldr r2, =IXP425_EXP_CFG0 - ldr r1, [r2] - orr r1, r1, #0x80000000 - str r1, [r2] -#endif - mov r1, #CONFIG_SYS_SDR_CONFIG - ldr r2, =IXP425_SDR_CONFIG - str r1, [r2] - - /* disable refresh cycles */ - mov r1, #0 - ldr r3, =IXP425_SDR_REFRESH - str r1, [r3] - - /* send nop command */ - mov r1, #3 - ldr r4, =IXP425_SDR_IR - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* set SDRAM internal refresh val */ - ldr r1, =CONFIG_SYS_SDRAM_REFRESH_CNT - str r1, [r3] - DELAY_FOR 0x4000, r0 - - /* send precharge-all command to close all open banks */ - mov r1, #2 - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* provide 8 auto-refresh cycles */ - mov r1, #4 - mov r5, #8 -111: str r1, [r4] - DELAY_FOR 0x100, r0 - subs r5, r5, #1 - bne 111b - - /* set mode register in sdram */ - mov r1, #CONFIG_SYS_SDR_MODE_CONFIG - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* send normal operation command */ - mov r1, #6 - str r1, [r4] - DELAY_FOR 0x4000, r0 - - /* copy */ - mov r0, #0 - mov r4, r0 - add r2, r0, #CONFIG_SYS_MONITOR_LEN - mov r1, #0x10000000 - mov r5, r1 - - 30: - ldr r3, [r0], #4 - str r3, [r1], #4 - cmp r0, r2 - bne 30b - - /* invalidate I & D caches & BTB */ - mcr p15, 0, r0, c7, c7, 0 - CPWAIT r0 - - /* invalidate I & Data TLB */ - mcr p15, 0, r0, c8, c7, 0 - CPWAIT r0 - - /* drain write and fill buffers */ - mcr p15, 0, r0, c7, c10, 4 - CPWAIT r0 - - /* move flash to 0x50000000 */ - ldr r2, =IXP425_EXP_CFG0 - ldr r1, [r2] - bic r1, r1, #0x80000000 - str r1, [r2] - - nop - nop - nop - nop - nop - nop - - /* invalidate I & Data TLB */ - mcr p15, 0, r0, c8, c7, 0 - CPWAIT r0 - - /* enable I cache */ - mrc p15, 0, r0, c1, c0, 0 - orr r0, r0, #MMU_Control_I - mcr p15, 0, r0, c1, c0, 0 - CPWAIT r0 - - mrs r0,cpsr /* set the cpu to SVC32 mode */ - bic r0,r0,#0x1f /* (superviser mode, M=10011) */ - orr r0,r0,#0x13 - msr cpsr,r0 - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /****************************************************************************/ /* */ @@ -618,13 +427,7 @@ _start_armboot: .word start_armboot stmia sp, {r0 - r12} /* Calling r0-r12 */ add r8, sp, #S_PC -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */ add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */ @@ -659,13 +462,7 @@ _start_armboot: .word start_armboot .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S index 239ad47a4f1..080d29d20b9 100644 --- a/arch/arm/cpu/lh7a40x/start.S +++ b/arch/arm/cpu/lh7a40x/start.S @@ -75,12 +75,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -104,7 +98,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -278,100 +271,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - -#define pWDTCTL 0x80001400 /* Watchdog Timer control register */ -#define pINTENC 0x8000050C /* Interupt-Controller enable clear register */ -#define pCLKSET 0x80000420 /* clock divisor register */ - - /* disable watchdog, set watchdog control register to - * all zeros (default reset) - */ - ldr r0, =pWDTCTL - mov r1, #0x0 - str r1, [r0] - - /* - * mask all IRQs by setting all bits in the INTENC register (default) - */ - mov r1, #0xffffffff - ldr r0, =pINTENC - str r1, [r0] - - /* FCLK:HCLK:PCLK = 1:2:2 */ - /* default FCLK is 200 MHz, using 14.7456 MHz fin */ - ldr r0, =pCLKSET - ldr r1, =0x0004ee39 -@ ldr r1, =0x0005ee39 @ 1: 2: 4 - str r1, [r0] - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - @add r0, r0, #4 /* start at first byte of bss */ - /* why inc. 4 bytes past then? */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -460,13 +359,7 @@ cpu_init_crit: .macro bad_save_user_regs sub sp, sp, #S_FRAME_SIZE stmia sp, {r0 - r12} @ Calling r0-r12 -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r3} @ get pc, cpsr add r0, sp, #S_FRAME_SIZE @ restore sp_SVC @@ -497,13 +390,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index bf8510eb768..03cf4dec36b 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -299,7 +299,7 @@ fixnext: add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop -#endif +#endif /* #ifndef CONFIG_PRELOADER */ #endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: @@ -316,7 +316,7 @@ clbss_l:str r2, [r0] /* clear loop... */ add r0, r0, #4 cmp r0, r1 bne clbss_l -#endif +#endif /* #ifndef CONFIG_PRELOADER */ /* * We are done. Do not return, instead branch to second part of board @@ -343,7 +343,7 @@ _start_oneboot_ofs _board_init_r_ofs: .word board_init_r - _start -#endif +#endif /* CONFIG_ONENAND_IPL */ _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -352,7 +352,7 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ +#else /* CONFIG_PRELOADER */ /****************************************************************************/ /* */ @@ -377,7 +377,7 @@ reset: /* Start OneNAND IPL */ ldr pc, =start_oneboot -#endif /* #if !defined(CONFIG_ONENAND_IPL) */ +#endif /* CONFIG_PRELOADER */ #ifndef CONFIG_PRELOADER /****************************************************************************/ @@ -419,13 +419,7 @@ reset: stmia sp, {r0 - r12} /* Calling r0-r12 */ add r8, sp, #S_PC -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */ add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */ @@ -460,13 +454,7 @@ reset: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr @@ -485,7 +473,7 @@ reset: .macro get_fiq_stack @ setup FIQ stack ldr sp, FIQ_STACK_START .endm -#endif /* CONFIG_PRELOADER */ +#endif /* CONFIG_PRELOADER /****************************************************************************/ @@ -499,7 +487,7 @@ reset: do_hang: ldr sp, _TEXT_BASE /* use 32 words abort stack */ bl hang /* hang and never return */ -#else /* !CONFIG_PRELOADER */ +#else .align 5 undefined_instruction: get_bad_stack @@ -618,4 +606,4 @@ mmu_table: .word (__base << 20) | 0xc12 .set __base, __base + 1 .endr -#endif +#endif /* CONFIG_PRELOADER */ diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index c58da987988..ca95dea552f 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -66,12 +66,6 @@ _start: b reset _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -95,7 +89,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -265,84 +258,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0x13 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit - /* - * before relocating, we have to setup RAM timing - * because memory timing is board-dependend, you will - * find a lowlevel_init.S in your board directory. - */ - bl lowlevel_init -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -/* - now copy to sram the interrupt vector -*/ - adr r0, real_vectors - add r2, r0, #1024 - ldr r1, =0x0c000000 - add r1, r1, #0x08 -vector_copy_loop: - ldmia r0!, {r3-r10} - stmia r1!, {r3-r10} - cmp r0, r2 - blo vector_copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index e6afe0f86fb..ab6e2f21949 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -76,12 +76,6 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -.globl _armboot_start -_armboot_start: - .word _start -#endif - /* * These are defined in the board-specific linker script. */ @@ -105,7 +99,6 @@ FIQ_STACK_START: .word 0x0badc0de #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -254,75 +247,6 @@ clbss_l:str r2, [r0] /* clear loop... */ _board_init_r: .word board_init_r -#else /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0x13 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ - - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l - - ldr pc, _start_armboot - -_start_armboot: .word start_armboot - -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - /* ************************************************************************* * @@ -441,13 +365,7 @@ cpu_init_crit: stmia sp, {r0 - r12} @ Calling r0-r12 add r8, sp, #S_PC -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r2, r2, #(GENERATED_GBL_DATA_SIZE+8) @ set base 2 words into abort stack -#else ldr r2, IRQ_STACK_START_IN -#endif ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0 add r0, sp, #S_FRAME_SIZE @ restore sp_SVC @@ -478,13 +396,7 @@ cpu_init_crit: .endm .macro get_bad_stack -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) - ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) - sub r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack -#else ldr r13, IRQ_STACK_START_IN @ setup our mode stack -#endif str lr, [r13] @ save caller lr / spsr mrs lr, spsr diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 5438ebc5fb7..ada3fbb6415 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -61,7 +61,6 @@ typedef struct global_data { unsigned long tbu; unsigned long long timer_reset_value; #endif -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) unsigned long relocaddr; /* Start address of U-Boot in RAM */ phys_size_t ram_size; /* RAM size */ unsigned long mon_len; /* monitor len */ @@ -70,7 +69,6 @@ typedef struct global_data { unsigned long reloc_off; #if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE)) unsigned long tlb_addr; -#endif #endif void **jt; /* jump table */ char env_buf[32]; /* buffer for getenv() before reloc. */ diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h index 4ac4f612e94..33973a32e0b 100644 --- a/arch/arm/include/asm/u-boot-arm.h +++ b/arch/arm/include/asm/u-boot-arm.h @@ -34,16 +34,12 @@ extern ulong _bss_start_ofs; /* BSS start relative to _start */ extern ulong _bss_end_ofs; /* BSS end relative to _start */ extern ulong IRQ_STACK_START; /* top of IRQ stack */ extern ulong FIQ_STACK_START; /* top of FIQ stack */ -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -extern ulong _armboot_start_ofs; /* code start */ -#else extern ulong _TEXT_BASE; /* code start */ extern ulong _datarel_start_ofs; extern ulong _datarelrolocal_start_ofs; extern ulong _datarellocal_start_ofs; extern ulong _datarelro_start_ofs; extern ulong IRQ_STACK_START_IN; /* 8 bytes in IRQ stack */ -#endif /* cpu/.../cpu.c */ int cpu_init(void); @@ -56,9 +52,7 @@ int arch_misc_init(void); /* board/.../... */ int board_init(void); int dram_init (void); -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) void dram_init_banksize (void); -#endif void setup_serial_tag (struct tag **params); void setup_revision_tag (struct tag **params); diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 33b369496a1..1fd5f8362f7 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -127,11 +127,7 @@ static int init_baudrate (void) char tmp[64]; /* long enough for environment variables */ int i = getenv_f("baudrate", tmp, sizeof (tmp)); -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) gd->baudrate = (i > 0) -#else - gd->bd->bi_baudrate = gd->baudrate = (i > 0) -#endif ? (int) simple_strtoul (tmp, NULL, 10) : CONFIG_BAUDRATE; @@ -142,11 +138,7 @@ static int display_banner (void) { printf ("\n\n%s\n\n", version_string); debug ("U-Boot code: %08lX -> %08lX BSS: -> %08lX\n", -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) _TEXT_BASE, -#else - _armboot_start, -#endif _bss_start_ofs+_TEXT_BASE, _bss_end_ofs+_TEXT_BASE); #ifdef CONFIG_MODEM_SUPPORT debug ("Modem Support enabled\n"); @@ -190,16 +182,6 @@ static int display_dram_config (void) return (0); } -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -#ifndef CONFIG_SYS_NO_FLASH -static void display_flash_config (ulong size) -{ - puts ("Flash: "); - print_size (size, "\n"); -} -#endif /* CONFIG_SYS_NO_FLASH */ -#endif - #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) static int init_func_i2c (void) { @@ -246,214 +228,6 @@ typedef int (init_fnc_t) (void); int print_cpuinfo (void); -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -init_fnc_t *init_sequence[] = { -#if defined(CONFIG_ARCH_CPU_INIT) - arch_cpu_init, /* basic arch cpu dependent setup */ -#endif - board_init, /* basic board dependent setup */ -#if defined(CONFIG_USE_IRQ) - interrupt_init, /* set up exceptions */ -#endif - timer_init, /* initialize timer */ -#ifdef CONFIG_FSL_ESDHC - get_clocks, -#endif - env_init, /* initialize environment */ - init_baudrate, /* initialze baudrate settings */ - serial_init, /* serial communications setup */ - console_init_f, /* stage 1 init of console */ - display_banner, /* say that we are here */ -#if defined(CONFIG_DISPLAY_CPUINFO) - print_cpuinfo, /* display cpu info (and speed) */ -#endif -#if defined(CONFIG_DISPLAY_BOARDINFO) - checkboard, /* display board info */ -#endif -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) - init_func_i2c, -#endif - dram_init, /* configure available RAM banks */ -#if defined(CONFIG_CMD_PCI) || defined (CONFIG_PCI) - arm_pci_init, -#endif - display_dram_config, - NULL, -}; - -void start_armboot (void) -{ - init_fnc_t **init_fnc_ptr; - char *s; -#if defined(CONFIG_VFD) || defined(CONFIG_LCD) - unsigned long addr; -#endif - - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t*)(_armboot_start - CONFIG_SYS_MALLOC_LEN - sizeof(gd_t)); - /* compiler optimization barrier needed for GCC >= 3.4 */ - __asm__ __volatile__("": : :"memory"); - - memset ((void*)gd, 0, sizeof (gd_t)); - gd->bd = (bd_t*)((char*)gd - sizeof(bd_t)); - memset (gd->bd, 0, sizeof (bd_t)); - - gd->flags |= GD_FLG_RELOC; - - monitor_flash_len = _bss_start - _armboot_start; - - for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { - if ((*init_fnc_ptr)() != 0) { - hang (); - } - } - - /* armboot_start is defined in the board-specific linker script */ - mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN, - CONFIG_SYS_MALLOC_LEN); - -#ifndef CONFIG_SYS_NO_FLASH - /* configure available FLASH banks */ - display_flash_config (flash_init ()); -#endif /* CONFIG_SYS_NO_FLASH */ - -#ifdef CONFIG_VFD -# ifndef PAGE_SIZE -# define PAGE_SIZE 4096 -# endif - /* - * reserve memory for VFD display (always full pages) - */ - /* bss_end is defined in the board-specific linker script */ - addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); - vfd_setmem (addr); - gd->fb_base = addr; -#endif /* CONFIG_VFD */ - -#ifdef CONFIG_LCD - /* board init may have inited fb_base */ - if (!gd->fb_base) { -# ifndef PAGE_SIZE -# define PAGE_SIZE 4096 -# endif - /* - * reserve memory for LCD display (always full pages) - */ - /* bss_end is defined in the board-specific linker script */ - addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); - lcd_setmem (addr); - gd->fb_base = addr; - } -#endif /* CONFIG_LCD */ - -#if defined(CONFIG_CMD_NAND) - puts ("NAND: "); - nand_init(); /* go init the NAND */ -#endif - -#if defined(CONFIG_CMD_ONENAND) - onenand_init(); -#endif - -#ifdef CONFIG_HAS_DATAFLASH - AT91F_DataflashInit(); - dataflash_print_info(); -#endif - -#ifdef CONFIG_GENERIC_MMC -/* - * MMC initialization is called before relocating env. - * Thus It is required that operations like pin multiplexer - * be put in board_init. - */ - puts ("MMC: "); - mmc_initialize (gd->bd); -#endif - - /* initialize environment */ - env_relocate (); - -#ifdef CONFIG_VFD - /* must do this after the framebuffer is allocated */ - drv_vfd_init(); -#endif /* CONFIG_VFD */ - -#ifdef CONFIG_SERIAL_MULTI - serial_initialize(); -#endif - - /* IP Address */ - gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); - - stdio_init (); /* get the devices list going. */ - - jumptable_init (); - -#if defined(CONFIG_API) - /* Initialize API */ - api_init (); -#endif - - console_init_r (); /* fully init console as a device */ - -#if defined(CONFIG_ARCH_MISC_INIT) - /* miscellaneous arch dependent initialisations */ - arch_misc_init (); -#endif -#if defined(CONFIG_MISC_INIT_R) - /* miscellaneous platform dependent initialisations */ - misc_init_r (); -#endif - - /* enable exceptions */ - enable_interrupts (); - - /* Perform network card initialisation if necessary */ - -#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96) - /* XXX: this needs to be moved to board init */ - if (getenv ("ethaddr")) { - uchar enetaddr[6]; - eth_getenv_enetaddr("ethaddr", enetaddr); - smc_set_mac_addr(enetaddr); - } -#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */ - - /* Initialize from environment */ - if ((s = getenv ("loadaddr")) != NULL) { - load_addr = simple_strtoul (s, NULL, 16); - } -#if defined(CONFIG_CMD_NET) - if ((s = getenv ("bootfile")) != NULL) { - copy_filename (BootFile, s, sizeof (BootFile)); - } -#endif - -#ifdef BOARD_LATE_INIT - board_late_init (); -#endif - -#ifdef CONFIG_BITBANGMII - bb_miiphy_init(); -#endif -#if defined(CONFIG_CMD_NET) -#if defined(CONFIG_NET_MULTI) - puts ("Net: "); -#endif - eth_initialize(gd->bd); -#if defined(CONFIG_RESET_PHY_R) - debug ("Reset Ethernet PHY\n"); - reset_phy(); -#endif -#endif - /* main_loop() can return to retry autoboot, if so just run it again. */ - for (;;) { - main_loop (); - } - - /* NOTREACHED - no way out of command loop except booting */ -} -#else void __dram_init_banksize(void) { gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; @@ -868,8 +642,6 @@ void board_init_r (gd_t *id, ulong dest_addr) /* NOTREACHED - no way out of command loop except booting */ } -#endif /* defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - void hang (void) { puts ("### ERROR ### Please RESET the board ###\n"); diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c index fe6d45987bf..d9175f05832 100644 --- a/arch/arm/lib/cache-cp15.c +++ b/arch/arm/lib/cache-cp15.c @@ -44,7 +44,6 @@ static void cp_delay (void) asm volatile("" : : : "memory"); } -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) static inline void dram_bank_mmu_setup(int bank) { u32 *page_table = (u32 *)gd->tlb_addr; @@ -58,18 +57,11 @@ static inline void dram_bank_mmu_setup(int bank) page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP; } } -#endif /* to activate the MMU we need to set up virtual memory: use 1M areas */ static inline void mmu_setup(void) { -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) u32 *page_table = (u32 *)gd->tlb_addr; -#else - static u32 __attribute__((aligned(16384))) page_table[4096]; - bd_t *bd = gd->bd; - int j; -#endif int i; u32 reg; @@ -77,20 +69,9 @@ static inline void mmu_setup(void) for (i = 0; i < 4096; i++) page_table[i] = i << 20 | (3 << 10) | 0x12; -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { dram_bank_mmu_setup(i); } -#else - /* Then, enable cacheable and bufferable for RAM only */ - for (j = 0; j < CONFIG_NR_DRAM_BANKS; j++) { - for (i = bd->bi_dram[j].start >> 20; - i < (bd->bi_dram[j].start + bd->bi_dram[j].size) >> 20; - i++) { - page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP; - } - } -#endif /* Copy the page table address to cp15 */ asm volatile("mcr p15, 0, %0, c2, c0, 0" diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c index 90aa04b87f3..74ff5ce1c44 100644 --- a/arch/arm/lib/interrupts.c +++ b/arch/arm/lib/interrupts.c @@ -46,12 +46,8 @@ int interrupt_init (void) /* * setup up stacks if necessary */ -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) IRQ_STACK_START = gd->irq_sp - 4; IRQ_STACK_START_IN = gd->irq_sp + 8; -#else - IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - GENERATED_GBL_DATA_SIZE - 4; -#endif FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; return arch_interrupt_init(); @@ -86,7 +82,6 @@ int disable_interrupts (void) return (old & 0x80) == 0; } #else -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) int interrupt_init (void) { /* @@ -96,7 +91,6 @@ int interrupt_init (void) return 0; } -#endif void enable_interrupts (void) { diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index b60a46e96d2..fa9dd9fe4d0 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -33,15 +33,6 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return(0); -} -#else int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -56,7 +47,6 @@ void dram_init_banksize(void) gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; gd->bd->bi_dram[0].size = gd->ram_size; } -#endif #ifdef CONFIG_DRIVER_TI_EMAC diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 7c0b8588873..ed5ed448263 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -225,20 +225,6 @@ U_BOOT_CMD( ); #endif -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) -int dram_init(void) -{ - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = kw_sdram_bar(i); - gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i), - kw_sdram_bs(i)); - } - - return 0; -} -#else int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -259,7 +245,6 @@ void dram_init_banksize(void) kw_sdram_bs(i)); } } -#endif /* Configure and enable MV88E1118 PHY */ void reset_phy(void) diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index 071dad66c4e..f8ef4fc9c51 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -160,19 +160,8 @@ u32 get_board_rev(void) int dram_init(void) { -#ifdef CONFIG_SYS_ARM_WITHOUT_RELOC - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); -#if (CONFIG_NR_DRAM_BANKS > 1) - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, - PHYS_SDRAM_2_SIZE); -#endif -#else gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); -#endif return 0; } @@ -682,9 +671,6 @@ void lcd_enable(void) int board_init(void) { -#ifdef CONFIG_SYS_ARM_WITHOUT_RELOC - board_early_init_f(); -#endif gd->bd->bi_arch_number = MACH_TYPE_TTC_VISION2; /* board id for linux */ /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 51b75ffc5bb..bba73746097 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -343,7 +343,6 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf ("ip_addr = %pI4\n", &bd->bi_ip_addr); #endif printf ("baudrate = %d bps\n", bd->bi_baudrate); -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) #if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE)) print_num ("TLB addr", gd->tlb_addr); #endif @@ -352,7 +351,6 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_num ("irq_sp", gd->irq_sp); /* irq stack pointer */ print_num ("sp start ", gd->start_addr_sp); print_num ("FB base ", gd->fb_base); -#endif return 0; } diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation index 2f91d0ac43f..c0957c210ce 100644 --- a/doc/README.arm-relocation +++ b/doc/README.arm-relocation @@ -34,17 +34,10 @@ At lib level: Board.c code is adapted from ppc code -At config level: - - Undefine CONFIG_SYS_ARM_WITHOUT_RELOC - * WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING * Boards which are not fixed to support relocation will be REMOVED! -Eventually, CONFIG_SYS_ARM_WITHOUT_RELOC will disappear and boards -which have to migrated to relocation will disappear too. - ----------------------------------------------------------------------------- For boards which boot from nand_spl, it is possible to save one copy diff --git a/doc/feature-removal-schedule.txt b/doc/feature-removal-schedule.txt index ffe261513c8..180ead5d81b 100644 --- a/doc/feature-removal-schedule.txt +++ b/doc/feature-removal-schedule.txt @@ -5,33 +5,6 @@ and who is going to be doing the work. When the feature is removed from U-Boot, its corresponding entry should also be removed from this file. ---------------------------- -What: CONFIG_SYS_ARM_WITHOUT_RELOC option -When: After Release 2011.03 - -Why: The implementation of U-Boot for the ARM architecture has - been reworked to support relocation. This allows to - efficiently use the same U-Boot binary image on systems with - different RAM sizes, and brings the implementation much more - in line with the code used for example on Power Architecture - systems (eventually allowing to merge into common code). This - seems especailly interesting now that ARM is getting Device - Tree support as well. - - All ARM boards need to be adapted to this new code, which - requires testing on the actual hardware, so this is a task - for the respective board maintainers or other users. - - Please see the commit message of commit f1d2b31 for details: - - http://git.denx.de/?p=u-boot.git;a=commit;h=f1d2b31 - - Support for CONFIG_SYS_ARM_WITHOUT_RELOC will be removed - after release v2011.03; all boards that have not been - converted by then, i. e. that are still broken then, are - considered unmaintained and without interest for the - community and will be removed as well. - --------------------------- What: CONFIG_NET_MULTI option diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index db4ec3d808d..50236380704 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -146,7 +146,6 @@ #define PHYS_SDRAM_1 CSD0_BASE #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) -#undef CONFIG_SYS_ARM_WITHOUT_RELOC #define CONFIG_SYS_SDRAM_BASE CSD0_BASE #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE diff --git a/include/configs/jornada.h b/include/configs/jornada.h index 4cbbf242bb6..41b09aad9f1 100644 --- a/include/configs/jornada.h +++ b/include/configs/jornada.h @@ -28,7 +28,6 @@ #define CONFIG_SA1110 1 /* This is an SA110 CPU */ #define CONFIG_JORNADA700 1 /* on an HP Jornada 700 series */ #define CONFIG_SYS_FLASH_PROTECTION 1 -#define CONFIG_SYS_ARM_WITHOUT_RELOC 1 #define CONFIG_SYS_TEXT_BASE 0xC1F00000 diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 1d971931b41..67dca27f733 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -190,17 +190,12 @@ #define CONFIG_SYS_SDRAM_BASE 0x90000000 #define CONFIG_SYS_INIT_RAM_ADDR 0x1FFE8000 -#ifndef CONFIG_SYS_ARM_WITHOUT_RELOC #define CONFIG_SYS_INIT_RAM_SIZE (64 * 1024) #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_GBL_DATA_OFFSET) #undef CONFIG_SKIP_RELOCATE_UBOOT -#else -#define CONFIG_SKIP_RELOCATE_UBOOT -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + 0x2000) -#endif #define CONFIG_BOARD_EARLY_INIT_F diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index ccd0af25548..d6244183c83 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -221,7 +221,7 @@ static int nand_load(struct mtd_info *mtd, unsigned int offs, return 0; } -#if defined(CONFIG_ARM) && !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) +#if defined(CONFIG_ARM) void board_init_f (ulong bootflag) { relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c index 21ed3fcff4b..a3f0f6ba51a 100644 --- a/nand_spl/nand_boot_fsl_nfc.c +++ b/nand_spl/nand_boot_fsl_nfc.c @@ -263,7 +263,7 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf) return 0; } -#if defined(CONFIG_ARM) && !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) +#if defined(CONFIG_ARM) void board_init_f (ulong bootflag) { relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, From e03f31697478e9edd523f34b1ed54b6ff2cb7242 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 28 Oct 2010 20:52:49 +0200 Subject: [PATCH 116/116] Drop support for CONFIG_SKIP_RELOCATE_UBOOT For ARM systems, before ELF relocation was introduced, CONFIG_SKIP_RELOCATE_UBOOT coul be used to prevent *COPYING* the U-Boot image from whereever it was loaded to it's link address (CONFIG_SYS_TEXT_BASE). The name was badly chosen, as no relocation was performed at all, it was just a memcpy(). With ELF relocation, this does not work like that any more, and related boards need to be fixed anyway. So don't keep this relict any longer. Signed-off-by: Wolfgang Denk Tested-by: Heiko Schocher Tested-by: Reinhard Meyer --- Makefile | 1 - README | 18 ++++++++---------- arch/arm/cpu/arm1136/start.S | 4 ---- arch/arm/cpu/arm1176/start.S | 4 ---- arch/arm/cpu/arm720t/start.S | 2 -- arch/arm/cpu/arm920t/start.S | 2 -- arch/arm/cpu/arm925t/start.S | 2 -- arch/arm/cpu/arm926ejs/start.S | 4 ---- arch/arm/cpu/arm946es/start.S | 2 -- arch/arm/cpu/arm_intcm/start.S | 2 -- arch/arm/cpu/armv7/start.S | 4 ---- arch/arm/cpu/ixp/start.S | 2 -- arch/arm/cpu/lh7a40x/start.S | 2 -- arch/arm/cpu/pxa/start.S | 4 ---- arch/arm/cpu/s3c44b0/start.S | 2 -- arch/arm/cpu/sa1100/start.S | 2 -- include/configs/SMN42.h | 1 - include/configs/afeb9260.h | 1 - include/configs/at91cap9adk.h | 1 - include/configs/at91rm9200dk.h | 2 -- include/configs/at91sam9260ek.h | 1 - include/configs/at91sam9261ek.h | 1 - include/configs/at91sam9263ek.h | 1 - include/configs/at91sam9m10g45ek.h | 1 - include/configs/at91sam9rlek.h | 1 - include/configs/cmc_pu2.h | 2 -- include/configs/colibri_pxa270.h | 1 - include/configs/cpuat91.h | 1 - include/configs/csb637.h | 2 -- include/configs/da830evm.h | 1 - include/configs/davinci_dm355evm.h | 1 - include/configs/davinci_dm355leopard.h | 1 - include/configs/davinci_dm365evm.h | 1 - include/configs/davinci_dm6467evm.h | 1 - include/configs/davinci_dvevm.h | 3 --- include/configs/davinci_schmoogie.h | 1 - include/configs/davinci_sffsdr.h | 1 - include/configs/davinci_sonata.h | 3 --- include/configs/dnp1110.h | 1 - include/configs/gcplus.h | 1 - include/configs/kb9202.h | 2 -- include/configs/lpc2292sodimm.h | 1 - include/configs/meesc.h | 1 - include/configs/mp2usb.h | 2 -- include/configs/mx31pdk.h | 1 - include/configs/mx51evk.h | 1 - include/configs/netstar.h | 3 --- include/configs/otc570.h | 1 - include/configs/pm9261.h | 1 - include/configs/pm9263.h | 1 - include/configs/pm9g45.h | 1 - include/configs/pxa255_idp.h | 1 - include/configs/s5p_goni.h | 2 -- include/configs/sbc35_a9g20.h | 1 - include/configs/shannon.h | 1 - include/configs/smdk6400.h | 2 -- include/configs/smdkc100.h | 2 -- include/configs/tny_a9260.h | 1 - include/configs/vision2.h | 2 -- include/configs/zipitz2.h | 1 - include/configs/zylonite.h | 1 - 61 files changed, 8 insertions(+), 109 deletions(-) diff --git a/Makefile b/Makefile index b1876117403..ae36ea5cdb0 100644 --- a/Makefile +++ b/Makefile @@ -1067,7 +1067,6 @@ mx31pdk_nand_config : unconfig echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \ else \ echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ - echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \ fi @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31 diff --git a/README b/README index f559811278d..1acf9a37eea 100644 --- a/README +++ b/README @@ -2836,19 +2836,17 @@ Low Level (hardware related) configuration options: globally (CONFIG_CMD_MEM). - CONFIG_SKIP_LOWLEVEL_INIT -- CONFIG_SKIP_RELOCATE_UBOOT + [ARM only] If this variable is defined, then certain + low level initializations (like setting up the memory + controller) are omitted and/or U-Boot does not + relocate itself into RAM. - [ARM only] If these variables are defined, then - certain low level initializations (like setting up - the memory controller) are omitted and/or U-Boot does - not relocate itself into RAM. - Normally these variables MUST NOT be defined. The - only exception is when U-Boot is loaded (to RAM) by - some other boot loader or by a debugger which - performs these initializations itself. + Normally this variable MUST NOT be defined. The only + exception is when U-Boot is loaded (to RAM) by some + other boot loader or by a debugger which performs + these initializations itself. - CONFIG_PRELOADER - Modifies the behaviour of start.S when compiling a loader that is executed before the actual U-Boot. E.g. when compiling a NAND SPL. diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 9f172b625dd..aecc943c8e9 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -215,7 +215,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -262,7 +261,6 @@ fixnext: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -295,9 +293,7 @@ jump_2_ram: ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 1a2e5aa37e4..f04d2688814 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -281,7 +281,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -328,7 +327,6 @@ fixnext: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ #ifdef CONFIG_ENABLE_MMU enable_mmu: @@ -399,9 +397,7 @@ _nand_boot: .word nand_boot ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index b94ecb43539..8cd267b352a 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -190,7 +190,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -217,7 +216,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 08d4e7bc3df..d4edde797b7 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -236,7 +236,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -263,7 +262,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index 6792a22affe..51229c61544 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -227,7 +227,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -254,7 +253,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 4f689c1ef5e..6dcc9b4d674 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -204,7 +204,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -251,7 +250,6 @@ fixnext: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -286,9 +284,7 @@ _nand_boot_ofs: ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 7378edc41cc..cad43ba0485 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -196,7 +196,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -223,7 +222,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index 2240f3a524a..957ca34766c 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -194,7 +194,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -221,7 +220,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 4a0710c96d4..bb3948d401c 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -189,7 +189,6 @@ relocate_code: stack_setup: mov sp, r4 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT adr r0, _start ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs @@ -259,7 +258,6 @@ clbss_l:str r2, [r0] /* clear loop... */ cmp r0, r1 bne clbss_l #endif /* #ifndef CONFIG_PRELOADER */ -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ /* * We are done. Do not return, instead branch to second part of board @@ -269,9 +267,7 @@ jump_2_ram: ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index 0269207bb29..8d1aebc7199 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -320,7 +320,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -347,7 +346,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S index 080d29d20b9..fd8a40b8aa4 100644 --- a/arch/arm/cpu/lh7a40x/start.S +++ b/arch/arm/cpu/lh7a40x/start.S @@ -207,7 +207,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -234,7 +233,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 03cf4dec36b..a136ed83fd9 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -251,7 +251,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT stmfd sp!, {r0-r12} copy_loop: ldmia r0!, {r3-r5, r7-r11} /* copy from source address [r0] */ @@ -300,7 +299,6 @@ fixnext: cmp r2, r3 blo fixloop #endif /* #ifndef CONFIG_PRELOADER */ -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER @@ -332,9 +330,7 @@ _start_oneboot_ofs ldr r0, _board_init_r_ofs adr r1, _start add lr, r0, r1 -#ifndef CONFIG_SKIP_RELOCATE_UBOOT add lr, lr, r9 -#endif /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ mov r1, r7 /* dest_addr */ diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index ca95dea552f..67b2c6a6955 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -179,7 +179,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -218,7 +217,6 @@ vector_copy_loop: stmia r1!, {r3-r10} cmp r0, r2 blo vector_copy_loop -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index ab6e2f21949..ace0c074df7 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -183,7 +183,6 @@ stack_setup: cmp r0, r6 beq clear_bss -#ifndef CONFIG_SKIP_RELOCATE_UBOOT copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ stmia r6!, {r9-r10} /* copy to target address [r1] */ @@ -210,7 +209,6 @@ fixloop: cmp r2, r3 blo fixloop #endif -#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */ clear_bss: #ifndef CONFIG_PRELOADER diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h index 6d8780abb1c..4a8acabf72c 100644 --- a/include/configs/SMN42.h +++ b/include/configs/SMN42.h @@ -31,7 +31,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 9cd0bc645a3..36a2a461d16 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -42,7 +42,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index cde5aede904..49c923f163d 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -44,7 +44,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index fb9d0a516d4..15de3103048 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -69,8 +69,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* * Size of malloc() pool diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 02401b8366b..5e7dee5299f 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -49,7 +49,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 05e12dd08c1..401478b2705 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -47,7 +47,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 0905638f8b0..f6cb40684fd 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -43,7 +43,6 @@ #ifndef CONFIG_SYS_USE_BOOT_NORFLASH #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 67288d0e485..de74dcf18b5 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -47,7 +47,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 22054cf4882..8dbd0825b52 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -44,7 +44,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index ff4f306fffa..a1976350e4f 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -68,8 +68,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index a5231894db2..23bfbeb1d7c 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -29,7 +29,6 @@ #define CONFIG_VPAC270 1 /* Toradex Colibri PXA270 board */ #undef BOARD_LATE_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #undef CONFIG_USE_IRQ #undef CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index 5f40908b498..f31081dbf37 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -28,7 +28,6 @@ #ifdef CONFIG_CPUAT91_RAM #define CONFIG_SKIP_LOWLEVEL_INIT 1 -#define CONFIG_SKIP_RELOCATE_UBOOT 1 #else #define CONFIG_BOOTDELAY 1 #endif diff --git a/include/configs/csb637.h b/include/configs/csb637.h index f92f3c74432..7a85d653020 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -69,8 +69,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* * Size of malloc() pool diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 906b8e76a71..1feada92632 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) #define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_TEXT_BASE 0xc1080000 /* diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index d4c3697e884..8a6905241c7 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -24,7 +24,6 @@ #define DAVINCI_DM355EVM #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index 4b1f02998c5..c9530327c65 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -23,7 +23,6 @@ #define DAVINCI_DM355LEOPARD #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index 04b60449ede..b78fe838671 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -24,7 +24,6 @@ #define DAVINCI_DM365EVM #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 3rd stage loader */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ #define CONFIG_SYS_CONSOLE_INFO_QUIET diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 6b5d8656b68..f0a8e98c36a 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -24,7 +24,6 @@ #define DAVINCI_DM6467EVM #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* SoC Configuration */ #define CONFIG_ARM926EJS /* arm926ejs CPU */ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index ec05abac49e..186726d3a67 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -133,7 +133,6 @@ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #endif #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_HW_ECC @@ -143,10 +142,8 @@ #elif defined(CONFIG_SYS_USE_NOR) #ifdef CONFIG_NOR_UART_BOOT #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #else #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #endif #define CONFIG_ENV_IS_IN_FLASH #undef CONFIG_SYS_NO_FLASH diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 409c5a464e1..967ebcc98a5 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -88,7 +88,6 @@ #define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index c7e0e56d7ff..4d866d0eb20 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -83,7 +83,6 @@ #define CONFIG_ENV_SECT_SIZE 2048 /* Env sector Size */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 3035f794d9f..0dc89ef41e2 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -122,7 +122,6 @@ #define CONFIG_ENV_SECT_SIZE 512 /* Env sector Size */ #define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #define CONFIG_SYS_NAND_BASE 0x02000000 #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ @@ -131,10 +130,8 @@ #elif defined(CONFIG_SYS_USE_NOR) #ifdef CONFIG_NOR_UART_BOOT #define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ #else #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #endif #define CONFIG_ENV_IS_IN_FLASH #undef CONFIG_SYS_NO_FLASH diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index 5c05e4df3c6..69c6420fe9d 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -32,7 +32,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #define CONFIG_SKIP_LOWLEVEL_INIT 1 -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h index 82e70f7b199..fd39ab4a033 100644 --- a/include/configs/gcplus.h +++ b/include/configs/gcplus.h @@ -39,7 +39,6 @@ * we use lowlevel_init (!CONFIG_SKIP_LOWLEVEL_INIT) to remedy that problem. */ #undef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT 1 /* * High Level Configuration Options diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h index a2edaf99836..cfb7ceacc1d 100644 --- a/include/configs/kb9202.h +++ b/include/configs/kb9202.h @@ -53,8 +53,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* undef this for direct boot from */ - /* NOR flash without preloader */ #define CONFIG_SYS_LONGHELP diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h index a0fe32ec2cf..17972d7e6ff 100644 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -31,7 +31,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 41a953e9052..a27b36b3786 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -48,7 +48,6 @@ #undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_MISC_INIT_R /* Call misc_init_r */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 956603a2da2..8e398d7205d 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -73,8 +73,6 @@ #define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ #define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#else -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 47e7c866c03..3b90a016239 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -47,7 +47,6 @@ #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #endif /* diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index f31fc4e6c02..b6868b2447f 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -28,7 +28,6 @@ /* High Level Configuration Options */ #define CONFIG_MX51 /* in a mx51 */ -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_SYS_MX5_HCLK 24000000 #define CONFIG_SYS_MX5_CLK32 32768 diff --git a/include/configs/netstar.h b/include/configs/netstar.h index ee5a995e5e2..f1590139344 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -119,9 +119,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -/*#define CONFIG_SKIP_RELOCATE_UBOOT*/ -/*#define CONFIG_SKIP_LOWLEVEL_INIT */ - /* * Partitions (mtdparts command line support) */ diff --git a/include/configs/otc570.h b/include/configs/otc570.h index af0202cfbe5..ca3bf26215e 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -48,7 +48,6 @@ #undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index aee842fbb7f..7fcc9babdc8 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -152,7 +152,6 @@ #define CONFIG_INITRD_TAG 1 #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 42ec855cc9d..619af2d9bfc 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -161,7 +161,6 @@ #define CONFIG_INITRD_TAG 1 #undef CONFIG_SKIP_LOWLEVEL_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_USER_LOWLEVEL_INIT 1 /* diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 2fbe5c66a9f..3ed6b56bfe2 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -47,7 +47,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 1ff35e39821..c1c7f80d4b2 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -42,7 +42,6 @@ * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */ -#undef CONFIG_SKIP_RELOCATE_UBOOT /* define for developing */ #define CONFIG_SYS_TEXT_BASE 0x0 /* diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 47b8a559957..541aec05ff1 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -40,8 +40,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SKIP_RELOCATE_UBOOT - /* input clock of PLL: has 24MHz input clock at S5PC110 */ #define CONFIG_SYS_CLK_FREQ_C110 24000000 diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index cdbe7106e49..00f4dc9f7c0 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -54,7 +54,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/shannon.h b/include/configs/shannon.h index e02d5e76bb4..c0e6643fb40 100644 --- a/include/configs/shannon.h +++ b/include/configs/shannon.h @@ -34,7 +34,6 @@ */ #define CONFIG_INFERNO /* we are using the inferno bootldr */ #define CONFIG_SKIP_LOWLEVEL_INIT 1 -#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index f89fc3ef8f8..671f2c7c8b1 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -40,8 +40,6 @@ #define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */ #define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */ -#define CONFIG_SKIP_RELOCATE_UBOOT - #define CONFIG_PERIPORT_REMAP #define CONFIG_PERIPORT_BASE 0x70000000 #define CONFIG_PERIPORT_SIZE 0x13 diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 6bea5b2e279..e36b262a8ec 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -45,8 +45,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SKIP_RELOCATE_UBOOT - /* input clock of PLL: SMDKC100 has 12MHz input clock */ #define CONFIG_SYS_CLK_FREQ 12000000 diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index 31a0bdf9f0d..7b18022c6e3 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -63,7 +63,6 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT /* * Hardware drivers diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 67dca27f733..a5c116b347f 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -195,8 +195,6 @@ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_GBL_DATA_OFFSET) -#undef CONFIG_SKIP_RELOCATE_UBOOT - #define CONFIG_BOARD_EARLY_INIT_F /* 166 MHz DDR RAM */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index a8b88dae37b..615d5c1f75c 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_TEXT_BASE 0x0 #undef BOARD_LATE_INIT -#undef CONFIG_SKIP_RELOCATE_UBOOT #undef CONFIG_USE_IRQ #undef CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 4ecef94514b..1e03b0180d9 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -45,7 +45,6 @@ #undef CONFIG_MMC #define BOARD_LATE_INIT 1 -#undef CONFIG_SKIP_RELOCATE_UBOOT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* we will never enable dcache, because we have to setup MMU first */