mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2025-11-28 22:21:49 +01:00
arm: dts: rockchip: sync rk3229-evb.dts from Linux
Sync rk3229-evb.dts from Linux version 5.17. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Johan Jonker
Kever Yang
parent
6980e83c41
commit
d3cb7565de
@ -1,21 +1,32 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
||||
/*
|
||||
* (C) Copyright 2017 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk322x.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "rk3229.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3229 Evaluation board";
|
||||
compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
|
||||
|
||||
aliases {
|
||||
mmc0 = &emmc;
|
||||
};
|
||||
|
||||
memory@60000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x60000000 0x40000000>;
|
||||
};
|
||||
|
||||
dc_12v: dc-12v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
ext_gmac: ext_gmac {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
@ -23,6 +34,18 @@
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
vcc_host: vcc-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&host_vbus_drv>;
|
||||
regulator-name = "vcc_host";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
@ -31,7 +54,95 @@
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vccio_1v8>;
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vccio_1v8: vccio-1v8-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vccio_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vccio_3v3: vccio-3v3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vccio_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vdd_arm: vdd-arm-regulator {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm1 0 25000 1>;
|
||||
pwm-supply = <&vcc_sys>;
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log-regulator {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 25000 1>;
|
||||
pwm-supply = <&vcc_sys>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwr_key>;
|
||||
|
||||
power_key: power-key {
|
||||
label = "GPIO Key Power";
|
||||
gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_POWER>;
|
||||
debounce-interval = <100>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
cap-mmc-highspeed;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
@ -50,25 +161,96 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&emmc {
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
|
||||
vccio1-supply = <&vccio_3v3>;
|
||||
vccio2-supply = <&vccio_1v8>;
|
||||
vccio4-supply = <&vccio_3v3>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
keys {
|
||||
pwr_key: pwr-key {
|
||||
rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
host_vbus_drv: host-vbus-drv {
|
||||
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
|
||||
status = "okay";
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
card-detect-delay = <200>;
|
||||
disable-wp;
|
||||
num-slots = <1>;
|
||||
supports-sd;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
status = "okay";
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy0_host: host-port {
|
||||
phy-supply = <&vcc_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
phy-supply = <&vcc_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy1_host: host-port {
|
||||
phy-supply = <&vcc_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host2_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host2_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
52
arch/arm/dts/rk3229.dtsi
Normal file
52
arch/arm/dts/rk3229.dtsi
Normal file
@ -0,0 +1,52 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*/
|
||||
|
||||
#include "rk322x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "rockchip,rk3229";
|
||||
|
||||
/delete-node/ opp-table0;
|
||||
|
||||
cpu0_opp_table: opp-table-0 {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp-408000000 {
|
||||
opp-hz = /bits/ 64 <408000000>;
|
||||
opp-microvolt = <950000>;
|
||||
clock-latency-ns = <40000>;
|
||||
opp-suspend;
|
||||
};
|
||||
opp-600000000 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <975000>;
|
||||
};
|
||||
opp-816000000 {
|
||||
opp-hz = /bits/ 64 <816000000>;
|
||||
opp-microvolt = <1000000>;
|
||||
};
|
||||
opp-1008000000 {
|
||||
opp-hz = /bits/ 64 <1008000000>;
|
||||
opp-microvolt = <1175000>;
|
||||
};
|
||||
opp-1200000000 {
|
||||
opp-hz = /bits/ 64 <1200000000>;
|
||||
opp-microvolt = <1275000>;
|
||||
};
|
||||
opp-1296000000 {
|
||||
opp-hz = /bits/ 64 <1296000000>;
|
||||
opp-microvolt = <1325000>;
|
||||
};
|
||||
opp-1392000000 {
|
||||
opp-hz = /bits/ 64 <1392000000>;
|
||||
opp-microvolt = <1375000>;
|
||||
};
|
||||
opp-1464000000 {
|
||||
opp-hz = /bits/ 64 <1464000000>;
|
||||
opp-microvolt = <1400000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -18,8 +18,6 @@
|
||||
serial0 = &uart0;
|
||||
serial1 = &uart1;
|
||||
serial2 = &uart2;
|
||||
mmc0 = &emmc;
|
||||
mmc1 = &sdmmc;
|
||||
spi0 = &spi0;
|
||||
};
|
||||
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user