Merge branch '2023-03-22-assorted-fixes'

- Assorted TI platform fixes, correct location of NXP boot format git
  repository, don't try and mount partitions that are too small to be
  ext4 as ext4, handle .bin files in .gitattributes, flush out panic
  messages for sure, and correct console location on Arm total_compute.

.gitattributes

@@ -1,6 +1,7 @@
 # Declare files that always have LF line endings on checkout
 * text eol=lf
 # Denote all files that are truly binary and should not be modified
+*.bin binary
 *.bmp binary
 *.ttf binary
 *.gz binary

arch/arm/lib/reset.c

@@ -25,6 +25,7 @@
 #include <cpu_func.h>
 #include <irq_func.h>
 #include <linux/delay.h>
+#include <stdio.h>
 
 __weak void reset_misc(void)
 {
@@ -33,8 +34,7 @@ __weak void reset_misc(void)
 int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 {
 	puts ("resetting ...\n");
-
+	flush();
-	mdelay(50);				/* wait 50 ms */
 
 	disable_interrupts();
 

arch/arm/mach-k3/include/mach/am62_hardware.h

@@ -55,7 +55,6 @@
 
 #define ROM_EXTENDED_BOOT_DATA_INFO		0x43c3f1e0
 
-/* Use Last 2K as Scratch pad */
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_START	0x43c30000
-#define TI_SRAM_SCRATCH_BOARD_EEPROM_START		0x70000000
 
 #endif /* __ASM_ARCH_AM62_HARDWARE_H */

configs/am62x_evm_a53_defconfig

@@ -68,7 +68,7 @@ CONFIG_MMC_SDHCI_ADMA=y
 CONFIG_SPL_MMC_SDHCI_ADMA=y
 CONFIG_MMC_SDHCI_AM654=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0x3
+CONFIG_SF_DEFAULT_MODE=0x0
 CONFIG_SF_DEFAULT_SPEED=25000000
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_SOFT_RESET=y

configs/am62x_evm_r5_defconfig

@@ -8,7 +8,7 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_SOC_K3_AM625=y
 CONFIG_TARGET_AM625_R5_EVM=y
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7000ffff
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x43c3a7f0
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
@@ -19,7 +19,9 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_SPL_SIZE_LIMIT=0x40000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x7000
+CONFIG_SPL_SIZE_LIMIT=0x3A7F0
+CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x3500
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -28,10 +30,14 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
 CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
 # CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_MAX_SIZE=0x58000
+CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
+CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
+CONFIG_SPL_MAX_SIZE=0x3B000
+CONFIG_SPL_PAD_TO=0x0
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x43c37800
+CONFIG_SPL_BSS_START_ADDR=0x43c3b000
-CONFIG_SPL_BSS_MAX_SIZE=0x5000
+CONFIG_SPL_BSS_MAX_SIZE=0x3000
+CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SEPARATE_BSS=y

doc/README.mpc85xx-sd-spi-boot

@@ -14,7 +14,7 @@ Where to get boot_format:
 ========================
 
 you can browse it online at:
-https://source.codeaurora.org/external/qoriq/qoriq-yocto-sdk/boot-format
+https://github.com/nxp-qoriq-yocto-sdk/boot-format
 
 Building
 ========

drivers/dma/ti/k3-udma.c

@@ -2150,7 +2150,7 @@ static int pktdma_tisci_rx_channel_config(struct udma_chan *uc)
 		flow_req.rx_psinfo_present = 1;
 	else
 		flow_req.rx_psinfo_present = 0;
-	flow_req.rx_error_handling = 1;
+	flow_req.rx_error_handling = 0;
 
 	ret = tisci_ops->rx_flow_cfg(tisci_rm->tisci, &flow_req);
 

fs/ext4/ext4_common.c

@@ -2373,6 +2373,10 @@ int ext4fs_mount(unsigned part_length)
 	struct ext2_data *data;
 	int status;
 	struct ext_filesystem *fs = get_fs();
+
+	if (part_length < SUPERBLOCK_SIZE)
+		return 0;
+
 	data = zalloc(SUPERBLOCK_SIZE);
 	if (!data)
 		return 0;

include/configs/total_compute.h

@@ -2,7 +2,7 @@
 /*
  * Configuration for Total Compute platform. Parts were derived from other ARM
  * configurations.
- * (C) Copyright 2020 Arm Limited
+ * (C) Copyright 2020-2023 Arm Limited
  * Usama Arif <usama.arif@arm.com>
  */
 
@@ -11,7 +11,8 @@
 
 /* Link Definitions */
 
-#define UART0_BASE		0x7ff80000
+/* AP non-secure UART base address */
+#define UART0_BASE		0x2A400000
 
 /* PL011 Serial Configuration */
 #define CFG_PL011_CLOCK	7372800

lib/panic.c

@@ -15,6 +15,7 @@
 #include <command.h>
 #endif
 #include <linux/delay.h>
+#include <stdio.h>
 
 static void panic_finish(void) __attribute__ ((noreturn));
 
@@ -24,7 +25,8 @@ static void panic_finish(void)
 #if defined(CONFIG_PANIC_HANG)
 	hang();
 #else
-	udelay(100000);	/* allow messages to go out */
+	flush();  /* flush the panic message before reset */
+
 	do_reset(NULL, 0, 0, NULL);
 #endif
 	while (1)