Merge branch '2022-10-31-vbe-implement-the-full-firmware-flow'

To quote Simon:
This series provides an implementation of VBE from TPL through to U-Boot
proper, using VBE to load the relevant firmware stages. It buils a single
image.bin file containing all the phases:

   TPL - initial phase, loads VPL using binman symbols
   VPL - main firmware phase, loads SPL using VBE parameters
   SPL - loads U-Boot proper using VBE parameters
   U-Boot - final firmware phase, where OS booting is processed

This series does not include the OS-booting phase. That will be the
subject of a future series.

The implementation is entirely handled by sandbox. It should be possible
to enable this on a real board without much effort, but that is also the
subject of a future series.

Kconfig

@@ -274,7 +274,7 @@ config HAS_CUSTOM_SYS_INIT_SP_ADDR
 config CUSTOM_SYS_INIT_SP_ADDR
 	hex "Static location for the initial stack pointer"
 	depends on HAS_CUSTOM_SYS_INIT_SP_ADDR
-	default SYS_TEXT_BASE if TFABOOT
+	default TEXT_BASE if TFABOOT
 
 config SYS_MALLOC_F
 	bool "Enable malloc() pool before relocation"

Makefile

@@ -1028,7 +1028,7 @@ LDFLAGS_u-boot += -z notext $(call ld-option,--apply-dynamic-relocs)
 LDFLAGS_u-boot += --build-id=none
 
 ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
-LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
+LDFLAGS_u-boot += -Ttext $(CONFIG_TEXT_BASE)
 endif
 
 # insure the checker run with the right endianness
@@ -1311,7 +1311,7 @@ shell_cmd = { $(call echo-cmd,$(1)) $(cmd_$(1)); }
 
 quiet_cmd_objcopy_uboot = OBJCOPY $@
 ifdef cmd_static_rela
-cmd_objcopy_uboot = $(cmd_objcopy) && $(call shell_cmd,static_rela,$<,$@,$(CONFIG_SYS_TEXT_BASE)) || { rm -f $@; false; }
+cmd_objcopy_uboot = $(cmd_objcopy) && $(call shell_cmd,static_rela,$<,$@,$(CONFIG_TEXT_BASE)) || { rm -f $@; false; }
 else
 cmd_objcopy_uboot = $(cmd_objcopy)
 endif
@@ -1365,7 +1365,7 @@ u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
 # from the SPL U-Boot version.
 #
 ifndef CONFIG_SYS_UBOOT_START
-CONFIG_SYS_UBOOT_START := $(CONFIG_SYS_TEXT_BASE)
+CONFIG_SYS_UBOOT_START := $(CONFIG_TEXT_BASE)
 endif
 
 # Boards with more complex image requirements can provide an .its source file
@@ -1390,7 +1390,7 @@ endif
 
 ifdef CONFIG_SPL_LOAD_FIT
 MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-p $(CONFIG_FIT_EXTERNAL_OFFSET) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
 	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
@@ -1398,10 +1398,10 @@ MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
 	$(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
 else
 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
-	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
-	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
 endif
@@ -1420,10 +1420,10 @@ KWD_CONFIG_FILE = $(shell \
 	fi)
 
 MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
-	-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
+	-T kwbimage -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE)
 
 MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \
-	-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
+	-T kwbimage -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) \
 	$(if $(KEYDIR),-k $(KEYDIR))
 
 MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
@@ -1432,7 +1432,7 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 UBOOT_BIN := u-boot.bin
 
 MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
-	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 
 u-boot.bin.lzma: u-boot.bin FORCE
@@ -1540,7 +1540,7 @@ u-boot.uim: u-boot.bin FORCE
 u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
 
-MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
+MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_TEXT_BASE)
 
 u-boot.ubl: u-boot-with-spl.bin FORCE
 	$(call if_changed,mkimage)
@@ -1684,8 +1684,8 @@ u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
 quiet_cmd_u-boot-elf ?= LD      $@
 	cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
 	$(if $(CONFIG_SYS_BIG_ENDIAN),-EB,-EL) \
-	-T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
+	-T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_TEXT_BASE) \
-	-Ttext=$(CONFIG_SYS_TEXT_BASE)
+	-Ttext=$(CONFIG_TEXT_BASE)
 u-boot.elf: u-boot.bin u-boot-elf.lds
 	$(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
 	$(call if_changed,u-boot-elf)
@@ -1706,7 +1706,7 @@ u-boot-mtk.bin: u-boot-with-spl.bin
 	$(call if_changed,copy)
 else
 MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
-	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) \
 	-n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
 
 u-boot-mtk.bin: u-boot.bin FORCE

arch/arc/cpu/u-boot.lds

@@ -10,7 +10,7 @@ OUTPUT_ARCH(arc)
 ENTRY(_start)
 SECTIONS
 {
-	. = CONFIG_SYS_TEXT_BASE;
+	. = CONFIG_TEXT_BASE;
 	__image_copy_start = .;
 	. = ALIGN(1024);
 	__ivt_start = .;

arch/arm/Kconfig

@@ -93,7 +93,7 @@ config LNX_KRNL_IMG_TEXT_OFFSET_BASE
 	depends on LINUX_KERNEL_IMAGE_HEADER
 	hex
 	help
-	  The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
+	  The value subtracted from CONFIG_TEXT_BASE to calculate the
 	  TEXT_OFFSET value written to the Linux kernel image header.
 
 config GICV2

arch/arm/cpu/arm1176/start.S

@@ -88,7 +88,7 @@ cpu_init_crit:
 
 	/* Prepare to disable the MMU */
 	adr	r2, mmu_disable_phys
-	sub	r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_SYS_TEXT_BASE)
+	sub	r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_TEXT_BASE)
 	b	mmu_disable
 
 	.align 5

arch/arm/cpu/arm926ejs/mxs/Makefile

@@ -60,14 +60,14 @@ spl/u-boot-spl.ivt: spl/u-boot-spl.bin
 
 u-boot.ivt: u-boot.bin
 	$(call if_changed,mkalign_mxs)
-	$(call if_changed,mkivt_mxs,$(CONFIG_SYS_TEXT_BASE),\
+	$(call if_changed,mkivt_mxs,$(CONFIG_TEXT_BASE),\
 		0x40001000,0x40001040)
 
 spl/u-boot-spl.csf: spl/u-boot-spl.ivt spl/u-boot-spl.bin board/$(VENDOR)/$(BOARD)/sign/u-boot-spl.csf
 	$(call if_changed,mkcsfreq_mxs,$(CONFIG_SPL_TEXT_BASE),0x8000)
 
 u-boot.csf: u-boot.ivt u-boot.bin board/$(VENDOR)/$(BOARD)/sign/u-boot.csf
-	$(call if_changed,mkcsfreq_mxs,$(CONFIG_SYS_TEXT_BASE),0x40001000)
+	$(call if_changed,mkcsfreq_mxs,$(CONFIG_TEXT_BASE),0x40001000)
 
 %.sig: %.csf
 	$(call if_changed,mkcst_mxs)

arch/arm/cpu/armv7/ls102xa/fdt.c

@@ -146,9 +146,9 @@ void ft_cpu_setup(void *blob, struct bd_info *bd)
 	 * Since second uboot binary has a head, that space need to be
 	 * reserved either(assuming its size is less than 0x1000).
 	 */
-	off = fdt_add_mem_rsv(blob, CONFIG_SYS_TEXT_BASE - UBOOT_HEAD_LEN,
+	off = fdt_add_mem_rsv(blob, CONFIG_TEXT_BASE - UBOOT_HEAD_LEN,
-			CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_SPL_MALLOC_SIZE +
+			      CONFIG_SYS_MONITOR_LEN +
-			UBOOT_HEAD_LEN);
+			      CONFIG_SYS_SPL_MALLOC_SIZE + UBOOT_HEAD_LEN);
 	if (off < 0)
 		printf("Failed to reserve memory for SD boot deep sleep: %s\n",
 		       fdt_strerror(off));

arch/arm/cpu/armv8/linux-kernel-image-header-vars.h

@@ -69,7 +69,7 @@
 				 (__HEAD_FLAG_PAGE_SIZE << 1) |	\
 				 (__HEAD_FLAG_PHYS_BASE << 3))
 
-#define TEXT_OFFSET (CONFIG_SYS_TEXT_BASE - \
+#define TEXT_OFFSET (CONFIG_TEXT_BASE - \
 			CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE)
 
 /*

arch/arm/cpu/armv8/start.S

@@ -35,7 +35,7 @@ _start:
 
 .globl	_TEXT_BASE
 _TEXT_BASE:
-	.quad	CONFIG_SYS_TEXT_BASE
+	.quad	CONFIG_TEXT_BASE
 
 /*
  * These are defined in the linker script.

arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi

@@ -36,7 +36,7 @@
 					os = "u-boot";
 					arch = "arm";
 					compression = "none";
-					load = <CONFIG_SYS_TEXT_BASE>;
+					load = <CONFIG_TEXT_BASE>;
 
 					u-boot-nodtb {
 					};

arch/arm/dts/imx8mm-u-boot.dtsi

@@ -90,7 +90,7 @@
 					arch = "arm64";
 					compression = "none";
 					description = "U-Boot (64-bit)";
-					load = <CONFIG_SYS_TEXT_BASE>;
+					load = <CONFIG_TEXT_BASE>;
 					type = "standalone";
 
 					uboot-blob {

arch/arm/dts/imx8mn-u-boot.dtsi

@@ -152,7 +152,7 @@
 					arch = "arm64";
 					compression = "none";
 					description = "U-Boot (64-bit)";
-					load = <CONFIG_SYS_TEXT_BASE>;
+					load = <CONFIG_TEXT_BASE>;
 					type = "standalone";
 
 					uboot-blob {

arch/arm/dts/imx8mp-u-boot.dtsi

@@ -113,7 +113,7 @@
 					type = "standalone";
 					arch = "arm64";
 					compression = "none";
-					load = <CONFIG_SYS_TEXT_BASE>;
+					load = <CONFIG_TEXT_BASE>;
 
 					uboot_blob: blob-ext {
 						filename = "u-boot-nodtb.bin";

arch/arm/dts/imx8mq-cm-u-boot.dtsi

@@ -77,7 +77,7 @@
 					type = "standalone";
 					arch = "arm64";
 					compression = "none";
-					load = <CONFIG_SYS_TEXT_BASE>;
+					load = <CONFIG_TEXT_BASE>;
 
 					uboot_blob: blob-ext {
 						filename = "u-boot-nodtb.bin";

arch/arm/dts/imx8mq-u-boot.dtsi

@@ -105,7 +105,7 @@
 					arch = "arm64";
 					compression = "none";
 					description = "U-Boot (64-bit)";
-					load = <CONFIG_SYS_TEXT_BASE>;
+					load = <CONFIG_TEXT_BASE>;
 					type = "standalone";
 
 					uboot-blob {

arch/arm/dts/rockchip-optee.dtsi

@@ -21,7 +21,7 @@
 					os = "U-Boot";
 					arch = "arm";
 					compression = "none";
-					load = <CONFIG_SYS_TEXT_BASE>;
+					load = <CONFIG_TEXT_BASE>;
 
 					u-boot-nodtb {
 					};

arch/arm/dts/sunxi-u-boot.dtsi

@@ -47,7 +47,7 @@
 					os = "u-boot";
 					arch = "arm64";
 					compression = "none";
-					load = <CONFIG_SYS_TEXT_BASE>;
+					load = <CONFIG_TEXT_BASE>;
 
 					u-boot-nodtb {
 					};

arch/arm/dts/tegra-u-boot.dtsi

@@ -1,7 +1,7 @@
 #include <config.h>
 
 #ifdef CONFIG_SPL_TEXT_BASE
-#define U_BOOT_OFFSET (CONFIG_SYS_TEXT_BASE - CONFIG_SPL_TEXT_BASE)
+#define U_BOOT_OFFSET (CONFIG_TEXT_BASE - CONFIG_SPL_TEXT_BASE)
 #else
 #define U_BOOT_OFFSET 0
 #endif

arch/arm/include/asm/arch-mxs/sys_proto.h

@@ -85,7 +85,7 @@ static const struct mxs_pair mxs_boot_modes[] = {
 #define MXS_BM_SDMMC1_3V3		0x0a
 #define MXS_BM_SDMMC1_1V8		0x1a
 
-#define MXS_SPL_DATA ((struct mxs_spl_data *)(CONFIG_SYS_TEXT_BASE - 0x200))
+#define MXS_SPL_DATA ((struct mxs_spl_data *)(CONFIG_TEXT_BASE - 0x200))
 
 struct mxs_spl_data {
 	uint8_t		boot_mode_idx;

arch/arm/include/asm/arch-sunxi/boot0.h

@@ -47,7 +47,7 @@
 #ifdef CONFIG_SPL_BUILD
 	.word	CONFIG_SPL_TEXT_BASE
 #else
-	.word   CONFIG_SYS_TEXT_BASE
+	.word   CONFIG_TEXT_BASE
 #endif
 	.word	fel_stash - .
 #else

arch/arm/lib/crt0.S

@@ -144,7 +144,7 @@ ENTRY(_main)
 	adr	r0, _main
 	ldr	r1, _start_ofs
 	add	r0, r1
-	ldr	r1, =CONFIG_SYS_TEXT_BASE
+	ldr	r1, =CONFIG_TEXT_BASE
 	sub	r1, r0
 	add	lr, r1
 #endif

arch/arm/lib/relocate_64.S

@@ -37,7 +37,7 @@ ENTRY(relocate_code)
 	 * correctly apply relocations, we need to know the linked value.
 	 *
 	 * Linked &__image_copy_start, which we know was at
-	 * CONFIG_SYS_TEXT_BASE, which is stored in _TEXT_BASE, as a non-
+	 * CONFIG_TEXT_BASE, which is stored in _TEXT_BASE, as a non-
 	 * relocated value, since it isn't a symbol reference.
 	 */
 	ldr	x1, _TEXT_BASE		/* x1 <- Linked &__image_copy_start */

arch/arm/mach-apple/Kconfig

@@ -1,6 +1,6 @@
 if ARCH_APPLE
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x00000000
 
 config SYS_CONFIG_NAME
@@ -16,6 +16,6 @@ config SYS_MALLOC_F_LEN
 	default 0x4000
 
 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
-	default SYS_TEXT_BASE
+	default TEXT_BASE
 
 endif

arch/arm/mach-aspeed/Kconfig

@@ -6,7 +6,7 @@ config SYS_ARCH
 config SYS_SOC
 	default "aspeed"
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x00000000
 
 choice

arch/arm/mach-at91/arm920t/lowlevel_init.S

@@ -22,9 +22,9 @@
 _MTEXT_BASE:
 #undef START_FROM_MEM
 #ifdef START_FROM_MEM
-	.word	CONFIG_SYS_TEXT_BASE-PHYS_FLASH_1
+	.word	CONFIG_TEXT_BASE-PHYS_FLASH_1
 #else
-	.word	CONFIG_SYS_TEXT_BASE
+	.word	CONFIG_TEXT_BASE
 #endif
 
 .globl lowlevel_init

arch/arm/mach-at91/arm926ejs/lowlevel_init.S

@@ -32,7 +32,7 @@ lowlevel_init:
 POS1:
 	adr	r5, POS1	/* r5 = POS1 run time */
 	ldr	r0, =POS1	/* r0 = POS1 compile */
-	sub	r5, r5, r0	/* r0 = CONFIG_SYS_TEXT_BASE-1 */
+	sub	r5, r5, r0	/* r0 = CONFIG_TEXT_BASE-1 */
 
 	/* memory control configuration 1 */
 	ldr	r0, =SMRDATA

arch/arm/mach-exynos/spl_boot.c

@@ -251,7 +251,7 @@ void copy_uboot_to_ram(void)
 #ifdef CONFIG_SPI_BOOTING
 	case BOOT_MODE_SERIAL:
 		/* Customised function to copy u-boot from SF */
-		exynos_spi_copy(param->uboot_size, CONFIG_SYS_TEXT_BASE);
+		exynos_spi_copy(param->uboot_size, CONFIG_TEXT_BASE);
 		break;
 #endif
 	case BOOT_MODE_SD:
@@ -267,7 +267,7 @@ void copy_uboot_to_ram(void)
 		copy_bl2_from_emmc = get_irom_func(EMMC44_INDEX);
 		end_bootop_from_emmc = get_irom_func(EMMC44_END_INDEX);
 
-		copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
+		copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_TEXT_BASE);
 		end_bootop_from_emmc();
 		break;
 #endif
@@ -279,7 +279,7 @@ void copy_uboot_to_ram(void)
 		 */
 		is_cr_z_set = config_branch_prediction(0);
 		usb_copy = get_irom_func(USB_INDEX);
-		usb_copy(0, (u32 *)CONFIG_SYS_TEXT_BASE);
+		usb_copy(0, (u32 *)CONFIG_TEXT_BASE);
 		config_branch_prediction(is_cr_z_set);
 		break;
 #endif
@@ -288,7 +288,7 @@ void copy_uboot_to_ram(void)
 	}
 
 	if (copy_bl2)
-		copy_bl2(offset, size, CONFIG_SYS_TEXT_BASE);
+		copy_bl2(offset, size, CONFIG_TEXT_BASE);
 }
 
 void memzero(void *s, size_t n)
@@ -329,7 +329,7 @@ void board_init_f(unsigned long bootflag)
 	copy_uboot_to_ram();
 
 	/* Jump to U-Boot image */
-	uboot = (void *)CONFIG_SYS_TEXT_BASE;
+	uboot = (void *)CONFIG_TEXT_BASE;
 	(*uboot)();
 	/* Never returns Here */
 }

arch/arm/mach-imx/Makefile

@@ -126,7 +126,7 @@ DEPFILE_EXISTS := 0
 endif
 
 MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
-	-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
+	-T $(IMAGE_TYPE) -e $(CONFIG_TEXT_BASE)
 u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
 
 u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
@@ -134,7 +134,7 @@ u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
 
 ifeq ($(CONFIG_MULTI_DTB_FIT),y)
 MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
-	-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
+	-T $(IMAGE_TYPE) -e $(CONFIG_TEXT_BASE)
 u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
 
 u-boot-dtb.imx: u-boot-fit-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
@@ -143,7 +143,7 @@ ifeq ($(DEPFILE_EXISTS),0)
 endif
 else ifeq ($(CONFIG_OF_SEPARATE),y)
 MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
-	-T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE)
+	-T $(IMAGE_TYPE) -e $(CONFIG_TEXT_BASE)
 u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
 
 u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
@@ -207,8 +207,8 @@ SPL: MKIMAGEOUTPUT = SPL.log
 SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
 	$(call if_changed,mkimage)
 
-MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
+MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_TEXT_BASE) \
-		-e $(CONFIG_SYS_TEXT_BASE) -C none -T firmware
+		-e $(CONFIG_TEXT_BASE) -C none -T firmware
 
 u-boot.uim: u-boot.bin FORCE
 	$(call if_changed,mkimage)

arch/arm/mach-imx/imx8/cpu.c

@@ -313,8 +313,8 @@ phys_size_t get_effective_memsize(void)
 
 			/* Find the memory region runs the U-Boot */
 			if (start >= phys_sdram_1_start && start <= end1 &&
-			    (start <= CONFIG_SYS_TEXT_BASE &&
+			    (start <= CONFIG_TEXT_BASE &&
-			    end >= CONFIG_SYS_TEXT_BASE)) {
+			    end >= CONFIG_TEXT_BASE)) {
 				if ((end + 1) <=
 				    ((sc_faddr_t)phys_sdram_1_start +
 				    phys_sdram_1_size))

arch/arm/mach-imx/mx7/Kconfig

@@ -16,7 +16,7 @@ config MX7D
 	select ROM_UNIFIED_SECTIONS
 	imply CMD_FUSE
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x87800000
 
 config SPL_TEXT_BASE

arch/arm/mach-imx/spl.c

@@ -341,7 +341,7 @@ void *board_spl_fit_buffer_addr(ulong fit_size, int sectors, int bl_len)
 	if (bl_len < 512)
 		bl_len = 512;
 
-	return  (void *)((CONFIG_SYS_TEXT_BASE - fit_size - bl_len -
+	return  (void *)((CONFIG_TEXT_BASE - fit_size - bl_len -
 			align_len) & ~align_len);
 }
 #endif

arch/arm/mach-ipq40xx/Kconfig

@@ -6,7 +6,7 @@ config SYS_SOC
 config SYS_MALLOC_F_LEN
 	default 0x2000
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x87300000
 
 config NR_DRAM_BANKS

arch/arm/mach-k3/config_secure.mk

@@ -30,7 +30,7 @@ tispl.bin_HS: $(obj)/u-boot-spl-nodtb.bin_HS $(patsubst %,$(obj)/dts/%.dtb_HS,$(
 	$(call if_changed,mkfitimage)
 
 MKIMAGEFLAGS_u-boot.img_HS = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
 	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
 

arch/arm/mach-k3/sysfw-loader.c

@@ -91,7 +91,7 @@ static void *sysfw_load_address;
 struct legacy_img_hdr *spl_get_load_buffer(ssize_t offset, size_t size)
 {
 	if (sysfw_loaded)
-		return (struct legacy_img_hdr *)(CONFIG_SYS_TEXT_BASE + offset);
+		return (struct legacy_img_hdr *)(CONFIG_TEXT_BASE + offset);
 	else if (sysfw_load_address)
 		return sysfw_load_address;
 	else

arch/arm/mach-keystone/config.mk

@@ -27,7 +27,7 @@ u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE
 
 ifndef CONFIG_SPL_BUILD
 MKIMAGEFLAGS_MLO = -A $(ARCH) -T gpimage -C none \
-	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) -n U-Boot
 MLO: u-boot.bin FORCE
 	$(call if_changed,mkimage)
 	@dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@

arch/arm/mach-nexell/include/mach/boot0.h

@@ -5,7 +5,7 @@
  * The NSIH (first 512 Bytes of u-boot.bin) is necessary for the
  * 2nd-Bootloader to get information like load address of U-Boot.
  *
- * 0x400 must be added to CONFIG_SYS_TEXT_BASE to have the actual load and
+ * 0x400 must be added to CONFIG_TEXT_BASE to have the actual load and
  * start address because 2nd-Bootloader loads with an offset of 0x400
  * (NSIH + 0x200 bytes are not loaded into RAM).
  *
@@ -23,9 +23,9 @@
 	.word	(_end - _start) + 20 * 1024	/* 0x50: load size
 						 *       (bin + 20k for DTB) */
 	.space	0x4
-	.word	CONFIG_SYS_TEXT_BASE + 0x400	/* 0x58: load address */
+	.word	CONFIG_TEXT_BASE + 0x400	/* 0x58: load address */
 	.word	0x00000000
-	.word	CONFIG_SYS_TEXT_BASE + 0x400	/* 0x60: start address */
+	.word	CONFIG_TEXT_BASE + 0x400	/* 0x60: start address */
 	.space	0x198
 	.byte	'N'				/* 0x1FC: "NSIH" signature */
 	.byte	'S'

arch/arm/mach-npcm/Kconfig

@@ -3,7 +3,7 @@ if ARCH_NPCM
 config SYS_ARCH
 	default "arm"
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x8000
 
 choice

arch/arm/mach-octeontx/cpu.c

@@ -46,7 +46,7 @@ struct mm_region *mem_map = otx_mem_map;
 void mem_map_fill(void)
 {
 	int banks = OTX_MEM_MAP_USED;
-	u32 dram_start = CONFIG_SYS_TEXT_BASE;
+	u32 dram_start = CONFIG_TEXT_BASE;
 
 	if (otx_is_soc(CN83XX)) {
 		otx_mem_map[banks].virt = 0x8c0000000000UL;

arch/arm/mach-octeontx2/cpu.c

@@ -51,7 +51,7 @@ struct mm_region *mem_map = otx2_mem_map;
 void mem_map_fill(void)
 {
 	int banks = OTX2_MEM_MAP_USED;
-	u32 dram_start = CONFIG_SYS_TEXT_BASE;
+	u32 dram_start = CONFIG_TEXT_BASE;
 
 	for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 		otx2_mem_map[banks].virt = dram_start;

arch/arm/mach-omap2/config_secure.mk

@@ -10,7 +10,7 @@ cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \
 	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
 else
 cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \
-	$(patsubst u-boot_HS_%,%,$(@F)) $< $@ $(CONFIG_SYS_TEXT_BASE) \
+	$(patsubst u-boot_HS_%,%,$(@F)) $< $@ $(CONFIG_TEXT_BASE) \
 	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
 endif
 else
@@ -102,7 +102,7 @@ u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin FORCE
 ifdef CONFIG_SPL_LOAD_FIT
 
 MKIMAGEFLAGS_u-boot_HS.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
 	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
 

arch/arm/mach-owl/Kconfig

@@ -14,7 +14,7 @@ config MACH_S700
 
 endchoice
 
-config SYS_TEXT_BASE
+config TEXT_BASE
         default 0x11000000
 
 config SYS_CONFIG_NAME

arch/arm/mach-rockchip/Kconfig

@@ -431,7 +431,7 @@ config ROCKCHIP_SPI_IMAGE
 	  is built by binman. U-Boot sits near the start of the image.
 
 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
-	default SYS_TEXT_BASE
+	default TEXT_BASE
 
 source "arch/arm/mach-rockchip/px30/Kconfig"
 source "arch/arm/mach-rockchip/rk3036/Kconfig"

arch/arm/mach-socfpga/Kconfig

@@ -40,7 +40,7 @@ config SYS_MALLOC_F_LEN
 	default 0x2000 if TARGET_SOCFPGA_ARRIA10
 	default 0x2000 if TARGET_SOCFPGA_GEN5
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x01000040 if TARGET_SOCFPGA_ARRIA10
 	default 0x01000040 if TARGET_SOCFPGA_GEN5
 

arch/arm/mach-stm32mp/Kconfig.13x

@@ -19,7 +19,7 @@ config TARGET_ST_STM32MP13x
 
 endchoice
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0xC0000000
 
 config PRE_CON_BUF_ADDR

arch/arm/mach-stm32mp/Kconfig.15x

@@ -93,7 +93,7 @@ config SPL_STM32MP15_PWR
 		This config enables implementation of driver-model pmic and
 		regulator uclass features for access to STM32MP15x PWR in SPL.
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0xC0100000
 
 config PRE_CON_BUF_ADDR

arch/arm/mach-sunxi/board.c

@@ -363,7 +363,7 @@ __weak void sunxi_sram_init(void)
 static bool sunxi_valid_emmc_boot(struct mmc *mmc)
 {
 	struct blk_desc *bd = mmc_get_blk_desc(mmc);
-	uint32_t *buffer = (void *)(uintptr_t)CONFIG_SYS_TEXT_BASE;
+	u32 *buffer = (void *)(uintptr_t)CONFIG_TEXT_BASE;
 	struct boot_file_head *egon_head = (void *)buffer;
 	int bootpart = EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config);
 	uint32_t spl_size, emmc_checksum, chksum = 0;

arch/arm/mach-sunxi/spl_spi_sunxi.c

@@ -341,7 +341,7 @@ static int spl_spi_load_image(struct spl_image_info *spl_image,
 	struct legacy_img_hdr *header;
 	uint32_t load_offset = sunxi_get_spl_size();
 
-	header = (struct legacy_img_hdr *)CONFIG_SYS_TEXT_BASE;
+	header = (struct legacy_img_hdr *)CONFIG_TEXT_BASE;
 	load_offset = max_t(uint32_t, load_offset, CONFIG_SYS_SPI_U_BOOT_OFFS);
 
 	spi0_init();

arch/arm/mach-zynqmp/mkimage_fit_atf.sh

@@ -26,7 +26,7 @@ TEE_LOAD_ADDR_LOW=`printf 0x%x $((TEE_LOAD_ADDR & 0xffffffff))`
 TEE_LOAD_ADDR_HIGH=`printf 0x%x $((TEE_LOAD_ADDR >> 32))`
 
 if [ -z "$BL33_LOAD_ADDR" ];then
-	BL33_LOAD_ADDR=`awk '/CONFIG_SYS_TEXT_BASE/ { print $3 }' include/generated/autoconf.h`
+	BL33_LOAD_ADDR=`awk '/CONFIG_TEXT_BASE/ { print $3 }' include/generated/autoconf.h`
 fi
 BL33_LOAD_ADDR_LOW=`printf 0x%x $((BL33_LOAD_ADDR & 0xffffffff))`
 BL33_LOAD_ADDR_HIGH=`printf 0x%x $((BL33_LOAD_ADDR >> 32))`

arch/m68k/cpu/mcf52x2/start.S

@@ -35,8 +35,8 @@
  */
 _vectors:
 .long	0x00000000		/* Flash offset is 0 until we setup CS0 */
-#if defined(CONFIG_M5282) && (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+#if defined(CONFIG_M5282) && (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
-.long	_start - CONFIG_SYS_TEXT_BASE
+.long	_start - CONFIG_TEXT_BASE
 #else
 .long	_START
 #endif
@@ -83,7 +83,7 @@ _vectors:
 
 #if defined(CONFIG_SYS_INT_FLASH_BASE) && \
     (defined(CONFIG_M5282) || defined(CONFIG_M5281))
-#if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+#if (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 .long	0x55AA55AA,0xAA55AA55		/* CFM Backdoorkey */
 .long	0xFFFFFFFF			/* all sectors protected */
 .long	0x00000000			/* supervisor/User restriction */
@@ -130,7 +130,7 @@ _start:
 	movec	%d0, %RAMBAR1
 
 #if defined(CONFIG_M5282)
-#if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+#if (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 	/*
 	 * Setup code in SRAM to initialize FLASHBAR,
 	 * if start from internal Flash
@@ -156,7 +156,7 @@ _after_flashbar_copy:
 	/* Setup code to initialize FLASHBAR, if start from external Memory */
 	move.l	#(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0
 	movec	%d0, %FLASHBAR
-#endif /* (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) */
+#endif /* (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) */
 
 #endif
 #endif
@@ -165,7 +165,7 @@ _after_flashbar_copy:
 	 * therefore no VBR to set
 	 */
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
-#if defined(CONFIG_M5282) && (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+#if defined(CONFIG_M5282) && (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 	move.l	#CONFIG_SYS_INT_FLASH_BASE, %d0
 #else
 	move.l	#CONFIG_SYS_FLASH_BASE, %d0

arch/m68k/cpu/mcf530x/start.S

@@ -39,8 +39,8 @@ _vectors:
 /* Flash offset is 0 until we setup CS0 */
 .long	0x00000000
 #if defined(CONFIG_M5307) && \
-	   (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+	   (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
-.long	_start - CONFIG_SYS_TEXT_BASE
+.long	_start - CONFIG_TEXT_BASE
 #else
 .long	_START
 #endif

arch/m68k/cpu/mcf5445x/start.S

@@ -26,10 +26,10 @@
 	rte;
 
 #if defined(CONFIG_SERIAL_BOOT)
-#define ASM_DRAMINIT	(asm_dram_init - CONFIG_SYS_TEXT_BASE + \
+#define ASM_DRAMINIT	(asm_dram_init - CONFIG_TEXT_BASE + \
 	CONFIG_SYS_INIT_RAM_ADDR)
-#define ASM_DRAMINIT_N	(asm_dram_init - CONFIG_SYS_TEXT_BASE)
+#define ASM_DRAMINIT_N	(asm_dram_init - CONFIG_TEXT_BASE)
-#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + \
+#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - CONFIG_TEXT_BASE + \
 	CONFIG_SYS_INIT_RAM_ADDR)
 #endif
 
@@ -116,7 +116,7 @@ vector192_255:
 asm_sbf_img_hdr:
 	.long	0x00000000		/* checksum, not yet implemented */
 	.long	0x00040000		/* image length */
-	.long	CONFIG_SYS_TEXT_BASE	/* image to be relocated at */
+	.long	CONFIG_TEXT_BASE	/* image to be relocated at */
 
 asm_dram_init:
 	move.w	#0x2700,%sr		/* Mask off Interrupt */
@@ -271,7 +271,7 @@ asm_dspi_rd_loop2:
 	jsr	asm_dspi_rd_status
 
 	/* jump to memory and execute */
-	move.l	#(CONFIG_SYS_TEXT_BASE + 0x400), %a0
+	move.l	#(CONFIG_TEXT_BASE + 0x400), %a0
 	jmp	(%a0)
 
 asm_dspi_wr_status:
@@ -298,7 +298,7 @@ asm_dspi_rd_status:
 	/* copy 4 boot pages to dram as soon as possible */
 	/* each page is 996 bytes (1056 total with 60 ECC bytes */
 	move.l  #0x00000000, %a1	/* src */
-	move.l	#CONFIG_SYS_TEXT_BASE, %a2		/* dst */
+	move.l	#CONFIG_TEXT_BASE, %a2		/* dst */
 	move.l	#0x3E0, %d0		/* sz in long */
 
 asm_boot_nand_copy:
@@ -381,7 +381,7 @@ asm_nand_init:
 	move.l	#4, %d2			/* start at 4 */
 	move.l  #0xFC0FFF04, %a0	/* cmd2 */
 	move.l  #0xFC0FFF0C, %a1	/* rar */
-	move.l	#(CONFIG_SYS_TEXT_BASE + 0xF80), %a2
+	move.l	#(CONFIG_TEXT_BASE + 0xF80), %a2
 
 asm_nand_read:
 	move.l	#0x11000000, %d0	/* rar */
@@ -419,7 +419,7 @@ asm_nand_copy:
 	bgt	asm_nand_read
 
 	/* jump to memory and execute */
-	move.l	#(CONFIG_SYS_TEXT_BASE + 0x400), %a0
+	move.l	#(CONFIG_TEXT_BASE + 0x400), %a0
 	jmp	(%a0)
 
 #endif			/* CONFIG_SYS_NAND_BOOT */

arch/microblaze/cpu/relocate.c

@@ -19,7 +19,7 @@
  * @rela_start: rela section start
  * @rela_end: rela section end
  * @dyn_start: dynamic section start
- * @origin_addr: address where u-boot starts(doesn't need to be CONFIG_SYS_TEXT_BASE)
+ * @origin_addr: address where u-boot starts(doesn't need to be CONFIG_TEXT_BASE)
  */
 void mb_fix_rela(u32 reloc_addr, u32 verbose, u32 rela_start,
 		 u32 rela_end, u32 dyn_start, u32 origin_addr)
@@ -29,9 +29,9 @@ void mb_fix_rela(u32 reloc_addr, u32 verbose, u32 rela_start,
 	/*
 	 * Return in case u-boot.elf is used directly.
 	 * Skip it when u-boot.bin is loaded to different address than
-	 * CONFIG_SYS_TEXT_BASE. In this case relocation is necessary to run.
+	 * CONFIG_TEXT_BASE. In this case relocation is necessary to run.
 	 */
-	if (reloc_addr == CONFIG_SYS_TEXT_BASE) {
+	if (reloc_addr == CONFIG_TEXT_BASE) {
 		debug_cond(verbose,
 			   "Relocation address is the same - skip relocation\n");
 		return;

arch/microblaze/cpu/start.S

@@ -55,15 +55,15 @@ uboot_sym_start:
 	add	r6, r0, r0
 
 	lwi	r7, r20, ALIGNMENT_ADDR
-	addi	r7, r7, -CONFIG_SYS_TEXT_BASE
+	addi	r7, r7, -CONFIG_TEXT_BASE
 	add	r7, r7, r5
 	lwi	r8, r20, ALIGNMENT_ADDR + 0x4
-	addi	r8, r8, -CONFIG_SYS_TEXT_BASE
+	addi	r8, r8, -CONFIG_TEXT_BASE
 	add	r8, r8, r5
 	lwi	r9, r20, ALIGNMENT_ADDR + 0x8
-	addi	r9, r9, -CONFIG_SYS_TEXT_BASE
+	addi	r9, r9, -CONFIG_TEXT_BASE
 	add	r9, r9, r5
-	addi	r10, r0, CONFIG_SYS_TEXT_BASE
+	addi	r10, r0, CONFIG_TEXT_BASE
 
 	brlid	r15, mb_fix_rela
 	nop

arch/mips/mach-jz47xx/jz4780/jz4780.c

@@ -58,7 +58,7 @@ void board_init_f(ulong dummy)
 	if (ret)
 		hang();
 
-	header = (struct legacy_img_hdr *)(CONFIG_SYS_TEXT_BASE -
+	header = (struct legacy_img_hdr *)(CONFIG_TEXT_BASE -
 					 sizeof(struct legacy_img_hdr));
 
 	count = blk_dread(mmc_get_blk_desc(mmc),
@@ -68,7 +68,7 @@ void board_init_f(ulong dummy)
 		hang();
 
 	image_entry_noargs_t image_entry =
-		(image_entry_noargs_t)CONFIG_SYS_TEXT_BASE;
+		(image_entry_noargs_t)CONFIG_TEXT_BASE;
 
 	image_entry();
 

arch/mips/mach-mscc/lowlevel_init.S

@@ -21,7 +21,7 @@ LEAF(lowlevel_init)
 
 	/* Modify ra/s0 such we return to physical NOR location */
 	li	t0, 0x0fffffff
-	li	t1, CONFIG_SYS_TEXT_BASE
+	li	t1, CONFIG_TEXT_BASE
 	and	s0, ra, t0
 	add	s0, s0, t1
 

arch/mips/mach-mtmips/Kconfig

@@ -28,7 +28,7 @@ config SYS_ICACHE_LINE_SIZE
 config SYS_SCACHE_LINE_SIZE
 	default 32 if SOC_MT7621
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x9c000000 if !SPL && !SOC_MT7621
 	default 0x80200000 if SPL || SOC_MT7621
 

arch/powerpc/cpu/mpc85xx/cpu_init_early.c

@@ -30,7 +30,7 @@ void setup_ifc(void)
 	_mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(15);
 	_mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_IPROT |
 			MAS1_TSIZE(BOOKE_PAGESZ_4M);
-	_mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, MAS2_I|MAS2_G);
+	_mas2 = FSL_BOOKE_MAS2(CONFIG_TEXT_BASE, MAS2_I | MAS2_G);
 	_mas3 = FSL_BOOKE_MAS3(flash_phys, 0, MAS3_SW|MAS3_SR|MAS3_SX);
 	_mas7 = FSL_BOOKE_MAS7(flash_phys);
 
@@ -58,7 +58,7 @@ void setup_ifc(void)
 			MAS0_ESEL(CONFIG_SYS_PPC_E500_DEBUG_TLB);
 	_mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_IPROT |
 			MAS1_TSIZE(BOOKE_PAGESZ_4M);
-	_mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, MAS2_I|MAS2_G);
+	_mas2 = FSL_BOOKE_MAS2(CONFIG_TEXT_BASE, MAS2_I | MAS2_G);
 	_mas3 = FSL_BOOKE_MAS3(flash_phys, 0, MAS3_SW|MAS3_SR|MAS3_SX);
 	_mas7 = FSL_BOOKE_MAS7(flash_phys);
 

arch/powerpc/cpu/mpc85xx/u-boot.lds

@@ -18,7 +18,7 @@ SECTIONS
 {
   /* Optional boot sector */
 #if defined(CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR) && !defined(CONFIG_SPL)
-  .bootsect CONFIG_SYS_TEXT_BASE - CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512 : {
+  .bootsect CONFIG_TEXT_BASE - CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512 : {
     KEEP(arch/powerpc/cpu/mpc85xx/start.o (.bootsect))
     . = CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512;
   }

arch/powerpc/dts/kmcent2-u-boot.dtsi

@@ -77,13 +77,13 @@
 
 	binman {
 		filename = "u-boot.bin";
-		skip-at-start = <CONFIG_SYS_TEXT_BASE>;
+		skip-at-start = <CONFIG_TEXT_BASE>;
 		sort-by-offset;
 		pad-byte = <0xff>;
 		size = <CONFIG_SYS_MONITOR_LEN>;
 
 		u-boot-with-ucode-ptr {
-			offset = <CONFIG_SYS_TEXT_BASE>;
+			offset = <CONFIG_TEXT_BASE>;
 			optional-ucode;
 		};
 

arch/powerpc/dts/u-boot.dtsi

@@ -10,13 +10,13 @@
 / {
 	binman {
 		filename = "u-boot.bin";
-		skip-at-start = <CONFIG_SYS_TEXT_BASE>;
+		skip-at-start = <CONFIG_TEXT_BASE>;
 		sort-by-offset;
 		pad-byte = <0xff>;
 		size = <CONFIG_SYS_MONITOR_LEN>;
 
 		u-boot-with-ucode-ptr {
-			offset = <CONFIG_SYS_TEXT_BASE>;
+			offset = <CONFIG_TEXT_BASE>;
 			optional-ucode;
 		};
 

arch/riscv/dts/binman.dtsi

@@ -27,7 +27,7 @@
 					os = "U-Boot";
 					arch = "riscv";
 					compression = "none";
-					load = <CONFIG_SYS_TEXT_BASE>;
+					load = <CONFIG_TEXT_BASE>;
 
 					uboot_blob: blob-ext {
 						filename = "u-boot-nodtb.bin";

arch/sandbox/cpu/spl.c

@@ -49,13 +49,14 @@ void board_init_f(ulong flag)
 	preloader_console_init();
 }
 
-u32 spl_boot_device(void)
+void board_boot_order(u32 *spl_boot_list)
 {
-	return BOOT_DEVICE_BOARD;
+	spl_boot_list[0] = BOOT_DEVICE_VBE;
+	spl_boot_list[1] = BOOT_DEVICE_BOARD;
 }
 
-static int spl_board_load_image(struct spl_image_info *spl_image,
+static int spl_board_load_file(struct spl_image_info *spl_image,
-				struct spl_boot_device *bootdev)
+			       struct spl_boot_device *bootdev)
 {
 	char fname[256];
 	int ret;
@@ -74,10 +75,52 @@ static int spl_board_load_image(struct spl_image_info *spl_image,
 	if (!spl_image->arg)
 		return log_msg_ret("exec", -ENOMEM);
 	strcpy(spl_image->arg, fname);
+	spl_image->flags = SPL_SANDBOXF_ARG_IS_FNAME;
 
 	return 0;
 }
-SPL_LOAD_IMAGE_METHOD("sandbox", 9, BOOT_DEVICE_BOARD, spl_board_load_image);
+SPL_LOAD_IMAGE_METHOD("sandbox_file", 9, BOOT_DEVICE_BOARD,
+		      spl_board_load_file);
+
+static int load_from_image(struct spl_image_info *spl_image,
+			   struct spl_boot_device *bootdev)
+{
+	struct sandbox_state *state = state_get_current();
+	enum u_boot_phase next_phase;
+	const char *fname;
+	ulong pos, size;
+	int full_size;
+	void *buf;
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_SANDBOX_VPL))
+		return -ENOENT;
+
+	next_phase = spl_next_phase();
+	pos = spl_get_image_pos();
+	size = spl_get_image_size();
+	if (pos == BINMAN_SYM_MISSING || size == BINMAN_SYM_MISSING) {
+		log_debug("No image found\n");
+		return -ENOENT;
+	}
+	log_info("Reading from pos %lx size %lx\n", pos, size);
+
+	/*
+	 * Set up spl_image to boot from jump_to_image_no_args(). Allocate this
+	 * outside the RAM buffer (i.e. don't use strdup()).
+	 */
+	fname = state->prog_fname ? state->prog_fname : state->argv[0];
+	ret = os_read_file(fname, &buf, &full_size);
+	if (ret)
+		return log_msg_ret("rd", -ENOMEM);
+	spl_image->flags = SPL_SANDBOXF_ARG_IS_BUF;
+	spl_image->arg = buf;
+	spl_image->offset = pos;
+	spl_image->size = size;
+
+	return 0;
+}
+SPL_LOAD_IMAGE_METHOD("sandbox_image", 7, BOOT_DEVICE_BOARD, load_from_image);
 
 void spl_board_init(void)
 {
@@ -89,20 +132,37 @@ void spl_board_init(void)
 		int ret;
 
 		ret = ut_run_list("spl", NULL, tests, count,
-				  state->select_unittests, 1);
+				  state->select_unittests, 1, false);
 		/* continue execution into U-Boot */
 	}
 }
 
 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 {
-	const char *fname = spl_image->arg;
+	switch (spl_image->flags) {
+	case SPL_SANDBOXF_ARG_IS_FNAME: {
+		const char *fname = spl_image->arg;
 
-	if (fname) {
+		if (fname) {
-		os_fd_restore();
+			os_fd_restore();
-		os_spl_to_uboot(fname);
+			os_spl_to_uboot(fname);
-	} else {
+		} else {
-		printf("No filename provided for U-Boot\n");
+			log_err("No filename provided for U-Boot\n");
+		}
+		break;
+	}
+	case SPL_SANDBOXF_ARG_IS_BUF: {
+		int ret;
+
+		ret = os_jump_to_image(spl_image->arg + spl_image->offset,
+				       spl_image->size);
+		if (ret)
+			log_err("Failed to load image\n");
+		break;
+	}
+	default:
+		log_err("Invalid flags\n");
+		break;
 	}
 	hang();
 }

arch/sandbox/cpu/start.c

@@ -244,6 +244,36 @@ static int sandbox_cmdline_cb_jump(struct sandbox_state *state,
 }
 SANDBOX_CMDLINE_OPT_SHORT(jump, 'j', 1, "Jumped from previous U-Boot");
 
+static int sandbox_cmdline_cb_program(struct sandbox_state *state,
+				      const char *arg)
+{
+	/*
+	 * Record the program name to use when jumping to future phases. This
+	 * is the original executable which holds all the phases. We need to
+	 * use this instead of argv[0] since each phase is started by
+	 * extracting a particular binary from the full program, then running
+	 * it. Therefore in that binary, argv[0] contains only the
+	 * current-phase executable.
+	 *
+	 * For example, sandbox TPL may be started using image file:
+	 *
+	 *     ./image.bin
+	 *
+	 * but then TPL needs to run VPL, which it does by extracting the VPL
+	 * image from the image.bin file.
+	 *
+	 *    ./temp-vpl
+	 *
+	 * When VPL runs it needs access to the original image.bin so it can
+	 * extract the next phase (SPL). This works if we use '-f image.bin'
+	 * when starting the original image.bin file.
+	 */
+	state->prog_fname = arg;
+
+	return 0;
+}
+SANDBOX_CMDLINE_OPT_SHORT(program, 'p', 1, "U-Boot program name");
+
 static int sandbox_cmdline_cb_memory(struct sandbox_state *state,
 				     const char *arg)
 {

arch/sandbox/cpu/state.c

@@ -470,7 +470,7 @@ int state_uninit(void)
 	int err;
 
 	if (state->write_ram_buf || state->write_state)
-		log_info("Writing sandbox state\n");
+		log_debug("Writing sandbox state\n");
 	state = &main_state;
 
 	/* Finish the bloblist, so that it is correct before writing memory */

arch/sandbox/dts/sandbox.dts

@@ -21,6 +21,9 @@
 		spi0 = &spi;
 	};
 
+	binman: binman {
+	};
+
 	memory {
 		reg = <0 CONFIG_SYS_SDRAM_SIZE>;
 	};
@@ -103,3 +106,7 @@
 #include "sandbox.dtsi"
 #include "cros-ec-keyboard.dtsi"
 #include "sandbox_pmic.dtsi"
+
+#ifdef CONFIG_SANDBOX_VPL
+#include "sandbox_vpl.dtsi"
+#endif

arch/sandbox/dts/sandbox_vpl.dtsi

@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Devicetree file for VPL (Verifying Program Loader)
+ */
+
+&binman {
+	u-boot-tpl-elf {
+		no-expanded;
+	};
+	u-boot-vpl-elf {
+		no-expanded;
+	};
+	fw-update {
+		type = "section";
+
+		/*
+		 * provide plenty of space for ELF files with debug info so that
+		 * gdb can be used
+		 */
+		offset = <0x400000>;
+		size = <0xdffc00>;
+
+		fit {
+			fit,external-offset = <0>;
+			description = "AP firmware";
+			images {
+				spl {
+					description = "U-Boot SPL";
+					type = "firmware";
+					phase = "spl";
+					arch = "sandbox";
+					os = "u-boot";
+					compression = "none";
+
+					hash-1 {
+						algo = "sha256";
+					};
+
+					u-boot-spl-elf {
+					};
+				};
+				u-boot {
+					description = "U-Boot";
+					type = "firmware";
+					phase = "u-boot";
+					arch = "sandbox";
+					os = "u-boot";
+					compression = "none";
+
+					hash-1 {
+						algo = "sha256";
+					};
+
+					u-boot-elf {
+					};
+				};
+			};
+
+			configurations {
+				conf-1 {
+					compatible = "sandbox";
+					description = "AP Firmware v1";
+					firmware = "spl", "u-boot";
+					signature {
+						algo = "sha1,rsa2048";
+						key-name-hint = "dev";
+						sign-images = "firmware";
+					};
+				};
+			};
+		};
+	};
+	state {
+		type = "fill";
+		size = <0x200>;
+	};
+	version {
+		type = "text";
+		text = "1.2.3";
+		size = <0x200>;
+	};
+	fdtmap {
+	};
+};

arch/sandbox/dts/test.dts

@@ -37,6 +37,8 @@
 		i2c0 = "/i2c@0";
 		mmc0 = "/mmc0";
 		mmc1 = "/mmc1";
+		mmc2 = "/mmc2";
+		mmc3 = "/mmc3";
 		pci0 = &pci0;
 		pci1 = &pci1;
 		pci2 = &pci2;
@@ -64,7 +66,7 @@
 		osd0 = "/osd";
 	};
 
-	binman {
+	binman: binman {
 	};
 
 	config {
@@ -78,6 +80,7 @@
 	};
 
 	bootstd {
+		u-boot,dm-vpl;
 		compatible = "u-boot,boot-std";
 
 		filename-prefixes = "/", "/boot/";
@@ -90,6 +93,46 @@
 		efi {
 			compatible = "u-boot,distro-efi";
 		};
+
+		/*
+		 * This is used for the VBE OS-request tests. A FAT filesystem
+		 * created in a partition with the VBE information appearing
+		 * before the parititon starts
+		 */
+		firmware0 {
+			u-boot,dm-vpl;
+			compatible = "fwupd,vbe-simple";
+			storage = "mmc1";
+			skip-offset = <0x200>;
+			area-start = <0x400>;
+			area-size = <0x1000>;
+			state-offset = <0x400>;
+			state-size = <0x40>;
+			version-offset = <0x800>;
+			version-size = <0x100>;
+		};
+
+		/*
+		 * This is used for the VBE VPL tests. The MMC device holds the
+		 * binman image.bin file. The test progresses through each phase
+		 * of U-Boot, loading each in turn from MMC.
+		 *
+		 * Note that the test enables this node (and mmc3) before
+		 * running U-Boot
+		 */
+		firmware1 {
+			u-boot,dm-vpl;
+			status = "disabled";
+			compatible = "fwupd,vbe-simple";
+			storage = "mmc3";
+			skip-offset = <0x400000>;
+			area-start = <0>;
+			area-size = <0xe00000>;
+			state-offset = <0xdffc00>;
+			state-size = <0x40>;
+			version-offset = <0xdffe00>;
+			version-size = <0x100>;
+		};
 	};
 
 	fuzzing-engine {
@@ -962,6 +1005,14 @@
 		compatible = "sandbox,mmc";
 	};
 
+	/* This is used for VBE VPL tests */
+	mmc3 {
+		status = "disabled";
+		compatible = "sandbox,mmc";
+		filename = "image.bin";
+		non-removable;
+	};
+
 	pch {
 		compatible = "sandbox,pch";
 	};
@@ -1404,21 +1455,6 @@
 			compatible = "denx,u-boot-fdt-test";
 			reg = <9 1>;
 		};
-
-		fwupd {
-			compatible = "simple-bus";
-			firmware0 {
-				compatible = "fwupd,vbe-simple";
-				storage = "mmc1";
-				area-start = <0x400>;
-				area-size = <0x1000>;
-				skip-offset = <0x200>;
-				state-offset = <0x400>;
-				state-size = <0x40>;
-				version-offset = <0x800>;
-				version-size = <0x100>;
-			};
-		};
 	};
 
 	translation-test@8000 {
@@ -1708,3 +1744,7 @@
 
 #include "sandbox_pmic.dtsi"
 #include "cros-ec-keyboard.dtsi"
+
+#ifdef CONFIG_SANDBOX_VPL
+#include "sandbox_vpl.dtsi"
+#endif

arch/sandbox/include/asm/spl.h

@@ -7,7 +7,11 @@
 #define __asm_spl_h
 
 enum {
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_MMC2_2,
 	BOOT_DEVICE_BOARD,
+	BOOT_DEVICE_VBE,
 };
 
 /**

arch/sandbox/include/asm/state.h

@@ -71,7 +71,8 @@ struct sandbox_state {
 	const char *parse_err;		/* Error to report from parsing */
 	int argc;			/* Program arguments */
 	char **argv;			/* Command line arguments */
-	const char *jumped_fname;	/* Jumped from previous U_Boot */
+	const char *jumped_fname;	/* Jumped from previous U-Boot */
+	const char *prog_fname;		/* U-Boot executable filename */
 	uint8_t *ram_buf;		/* Emulated RAM buffer */
 	unsigned long ram_size;		/* Size of RAM buffer */
 	const char *ram_buf_fname;	/* Filename to use for RAM buffer */

arch/sh/cpu/u-boot.lds

@@ -25,7 +25,7 @@ ENTRY(_start)
 
 SECTIONS
 {
-	. = CONFIG_SYS_TEXT_BASE;
+	. = CONFIG_TEXT_BASE;
 	reloc_dst = .;
 
 	PROVIDE (_ftext = .);

arch/x86/Kconfig

@@ -924,8 +924,8 @@ config CACHE_QOS_SIZE_PER_BIT
 
 config X86_OFFSET_U_BOOT
 	hex "Offset of U-Boot in ROM image"
-	depends on HAVE_SYS_TEXT_BASE
+	depends on HAVE_TEXT_BASE
-	default SYS_TEXT_BASE
+	default TEXT_BASE
 
 config X86_OFFSET_SPL
 	hex "Offset of SPL in ROM image"

arch/x86/cpu/apollolake/spl.c

@@ -118,7 +118,7 @@ static int spl_fast_spi_load_image(struct spl_image_info *spl_image,
 
 	spl_image->size = CONFIG_SYS_MONITOR_LEN;  /* We don't know SPL size */
 	spl_image->entry_point = spl_phase() == PHASE_TPL ?
-		CONFIG_SPL_TEXT_BASE : CONFIG_SYS_TEXT_BASE;
+		CONFIG_SPL_TEXT_BASE : CONFIG_TEXT_BASE;
 	spl_image->load_addr = spl_image->entry_point;
 	spl_image->os = IH_OS_U_BOOT;
 	spl_image->name = "U-Boot";

arch/x86/cpu/quark/quark.c

@@ -49,7 +49,7 @@ static void quark_setup_mtrr(void)
 
 	/* variable range MTRR#0: ROM area */
 	mask = ~(CONFIG_SYS_MONITOR_LEN - 1);
-	base = CONFIG_SYS_TEXT_BASE & mask;
+	base = CONFIG_TEXT_BASE & mask;
 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ROM),
 		       base | MTRR_TYPE_WRBACK);
 	msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ROM),

arch/x86/cpu/start.S

@@ -237,15 +237,15 @@ multiboot_header:
 	/* checksum */
 	.long	-0x1BADB002 - (1 << 16)
 	/* header addr */
-	.long	multiboot_header - _x86boot_start + CONFIG_SYS_TEXT_BASE
+	.long	multiboot_header - _x86boot_start + CONFIG_TEXT_BASE
 	/* load addr */
-	.long	CONFIG_SYS_TEXT_BASE
+	.long	CONFIG_TEXT_BASE
 	/* load end addr */
 	.long	0
 	/* bss end addr */
 	.long	0
 	/* entry addr */
-	.long	CONFIG_SYS_TEXT_BASE
+	.long	CONFIG_TEXT_BASE
 
 #ifdef CONFIG_X86_LOAD_FROM_32_BIT
 	/*

arch/x86/cpu/u-boot-64.lds

@@ -15,8 +15,8 @@ SECTIONS
 	/DISCARD/ : { *(__u_boot_list_2_cmd_*) }
 #endif
 
-#ifdef CONFIG_SYS_TEXT_BASE
+#ifdef CONFIG_TEXT_BASE
-	. = CONFIG_SYS_TEXT_BASE;	/* Location of bootcode in flash */
+	. = CONFIG_TEXT_BASE;	/* Location of bootcode in flash */
 #endif
 	__text_start = .;
 

arch/x86/cpu/u-boot.lds

@@ -15,7 +15,7 @@ SECTIONS
 	/DISCARD/ : { *(__u_boot_list_2_cmd_*) }
 #endif
 
-	. = CONFIG_SYS_TEXT_BASE;	/* Location of bootcode in flash */
+	. = CONFIG_TEXT_BASE;	/* Location of bootcode in flash */
 	__text_start = .;
 
 	.text.start : { *(.text.start); }

arch/x86/lib/relocate.c

@@ -162,10 +162,10 @@ int do_elf_reloc_fixups(void)
 	if (re_src == re_end)
 		panic("No relocation data");
 
-#ifdef CONFIG_SYS_TEXT_BASE
+#ifdef CONFIG_TEXT_BASE
-	text_base = CONFIG_SYS_TEXT_BASE;
+	text_base = CONFIG_TEXT_BASE;
 #else
-	panic("No CONFIG_SYS_TEXT_BASE");
+	panic("No CONFIG_TEXT_BASE");
 #endif
 #if CONFIG_IS_ENABLED(X86_64)
 	do_elf_reloc_fixups64(text_base, size, re_src, re_end);

arch/x86/lib/spl.c

@@ -66,7 +66,7 @@ static int x86_spl_init(void)
 	 * TODO(sjg@chromium.org): We use this area of RAM for the stack
 	 * and global_data in SPL. Once U-Boot starts up and releocates it
 	 * is not needed. We could make this a CONFIG option or perhaps
-	 * place it immediately below CONFIG_SYS_TEXT_BASE.
+	 * place it immediately below CONFIG_TEXT_BASE.
 	 */
 	__maybe_unused char *ptr = (char *)0x110000;
 #else
@@ -209,8 +209,8 @@ static int spl_board_load_image(struct spl_image_info *spl_image,
 				struct spl_boot_device *bootdev)
 {
 	spl_image->size = CONFIG_SYS_MONITOR_LEN;
-	spl_image->entry_point = CONFIG_SYS_TEXT_BASE;
+	spl_image->entry_point = CONFIG_TEXT_BASE;
-	spl_image->load_addr = CONFIG_SYS_TEXT_BASE;
+	spl_image->load_addr = CONFIG_TEXT_BASE;
 	spl_image->os = IH_OS_U_BOOT;
 	spl_image->name = "U-Boot";
 

board/BuS/eb_cpu5282/eb_cpu5282.c

@@ -26,7 +26,7 @@ DECLARE_GLOBAL_DATA_PTR;
 int checkboard (void)
 {
 	puts("Board: EB+CPU5282 (BuS Elektronik GmbH & Co. KG)\n");
-#if (CONFIG_SYS_TEXT_BASE ==  CONFIG_SYS_INT_FLASH_BASE)
+#if (CONFIG_TEXT_BASE ==  CONFIG_SYS_INT_FLASH_BASE)
 	puts("       Boot from Internal FLASH\n");
 #endif
 	return 0;

board/advantech/som-db5800-som-6867/Kconfig

@@ -12,7 +12,7 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "som-db5800-som-6867"
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0xfff00000
 
 config BOARD_SPECIFIC_OPTIONS # dummy

board/armltd/vexpress64/Kconfig

@@ -54,9 +54,9 @@ config JUNO_DTB_PART
 	  device tree blob to configure U-Boot.
 
 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
-	default SYS_TEXT_BASE
+	default TEXT_BASE
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x88000000 if TARGET_VEXPRESS64_BASE_FVP
 	default 0xe0000000 if TARGET_VEXPRESS64_JUNO
 	default 0x00001000 if TARGET_VEXPRESS64_BASER_FVP

board/beacon/beacon-rzg2m/beacon-rzg2m.c

@@ -12,7 +12,7 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_init(void)
 {
 	/* address of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000;
+	gd->bd->bi_boot_params = CONFIG_TEXT_BASE + 0x50000;
 
 	return 0;
 }

board/broadcom/bcmstb/bcmstb.c

@@ -61,13 +61,13 @@ int dram_init_banksize(void)
 
 	/*
 	 * On this SoC, U-Boot is running as an ELF file.  Change the
-	 * relocation address to CONFIG_SYS_TEXT_BASE, so that in
+	 * relocation address to CONFIG_TEXT_BASE, so that in
 	 * setup_reloc, gd->reloc_off works out to 0, effectively
 	 * disabling relocation.  Otherwise U-Boot hangs in the setup
 	 * instructions just before relocate_code in
 	 * arch/arm/lib/crt0.S.
 	 */
-	gd->relocaddr = CONFIG_SYS_TEXT_BASE;
+	gd->relocaddr = CONFIG_TEXT_BASE;
 
 	return 0;
 }

board/cobra5272/README

@@ -89,9 +89,9 @@ please first check:
 	=> u-boot as single bootloader starting from flash
 
 
-	in board/cobra5272/config.mk CONFIG_SYS_TEXT_BASE should be
+	in board/cobra5272/config.mk CONFIG_TEXT_BASE should be
 
-		CONFIG_SYS_TEXT_BASE = 0xffe00000
+		CONFIG_TEXT_BASE = 0xffe00000
 
 	=> linking address for u-boot as single bootloader stored in flash
 
@@ -128,9 +128,9 @@ please modify the settings:
 	=> u-boot as RAM version, chainloaded by another bootloader or using bdm cable
 
 
-	in board/cobra5272/config.mk CONFIG_SYS_TEXT_BASE should be
+	in board/cobra5272/config.mk CONFIG_TEXT_BASE should be
 
-		CONFIG_SYS_TEXT_BASE = 0x00020000
+		CONFIG_TEXT_BASE = 0x00020000
 
 	=> target linking address for RAM
 

board/congatec/cgtqmx8/cgtqmx8.c

@@ -425,7 +425,7 @@ int board_late_init(void)
 	char *end_of_uboot;
 	char command[256];
 
-	end_of_uboot = (char *)(ulong)(CONFIG_SYS_TEXT_BASE + _end_ofs
+	end_of_uboot = (char *)(ulong)(CONFIG_TEXT_BASE + _end_ofs
 			+ fdt_totalsize(gd->fdt_blob));
 	end_of_uboot += 9;
 

board/congatec/conga-qeval20-qa3-e3845/Kconfig

@@ -11,7 +11,7 @@ config SYS_CONFIG_NAME
 	default "conga-qeval20-qa3-e3845" if TARGET_CONGA_QEVAL20_QA3_E3845
 	default "theadorable-x86-conga-qa3-e3845" if TARGET_THEADORABLE_X86_CONGA_QA3_E3845
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0xfff00000
 
 config BOARD_SPECIFIC_OPTIONS # dummy

board/coreboot/coreboot/Kconfig

@@ -9,7 +9,7 @@ config SYS_VENDOR
 config SYS_SOC
 	default "coreboot"
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x01110000
 
 config BOARD_SPECIFIC_OPTIONS # dummy

board/cssi/MCR3000/Kconfig

@@ -9,7 +9,7 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "MCR3000"
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x04000000
 
 endif

board/davinci/da8xxevm/README.da850

@@ -124,7 +124,7 @@ NOR Flash is XIP (execute-in-place), so no AIS (or SPL) is needed. The
 u-boot.bin is directy flashed, but CONFIT_DA850_LOWLEVEL must be set
 to initialize hardware that's normally done by SPL.
 
-For this case, CONFIG_SYS_TEXT_BASE=0x60000000 which is the address to
+For this case, CONFIG_TEXT_BASE=0x60000000 which is the address to
 which the bootloader jumps when powered on.
 
 Example:

board/dfi/dfi-bt700/Kconfig

@@ -11,7 +11,7 @@ config SYS_CONFIG_NAME
 	default "dfi-bt700" if TARGET_Q7X_151_DFI_BT700
 	default "theadorable-x86-dfi-bt700" if TARGET_THEADORABLE_X86_DFI_BT700
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0xfff00000
 
 config BOARD_SPECIFIC_OPTIONS # dummy

board/efi/efi-x86_payload/Kconfig

@@ -12,7 +12,7 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "efi-x86_payload"
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x00200000
 
 config BOARD_SPECIFIC_OPTIONS # dummy

board/emulation/qemu-arm/Kconfig

@@ -1,6 +1,6 @@
 if TARGET_QEMU_ARM_32BIT || TARGET_QEMU_ARM_64BIT
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x00000000
 
 config BOARD_SPECIFIC_OPTIONS # dummy

board/emulation/qemu-riscv/Kconfig

@@ -12,7 +12,7 @@ config SYS_CPU
 config SYS_CONFIG_NAME
 	default "qemu-riscv"
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x81200000 if SPL
 	default 0x80000000 if !RISCV_SMODE
 	default 0x80200000 if RISCV_SMODE && ARCH_RV64I

board/emulation/qemu-x86/Kconfig

@@ -12,7 +12,7 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "qemu-x86"
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0xfff00000 if !SUPPORT_SPL
 	default 0x01110000 if SUPPORT_SPL
 

board/freescale/imx8qm_mek/uboot-container.cfg

@@ -9,4 +9,4 @@ BOOT_FROM SD 0x400
 SOC_TYPE IMX8QM
 CONTAINER
 IMAGE A35 bl31.bin	0x80000000
-IMAGE A35 u-boot.bin	CONFIG_SYS_TEXT_BASE
+IMAGE A35 u-boot.bin	CONFIG_TEXT_BASE

board/freescale/imx8qxp_mek/uboot-container.cfg

@@ -9,4 +9,4 @@ BOOT_FROM SD 0x400
 SOC_TYPE IMX8QX
 CONTAINER
 IMAGE A35 bl31.bin	0x80000000
-IMAGE A35 u-boot.bin	CONFIG_SYS_TEXT_BASE
+IMAGE A35 u-boot.bin	CONFIG_TEXT_BASE

board/freescale/ls1021atsn/ls1021atsn.c

@@ -188,7 +188,7 @@ void board_init_f(ulong dummy)
 	 * in last boot.
 	 */
 	if (is_warm_boot()) {
-		second_uboot = (void (*)(void))CONFIG_SYS_TEXT_BASE;
+		second_uboot = (void (*)(void))CONFIG_TEXT_BASE;
 		second_uboot();
 	}
 

board/freescale/ls1021atwr/ls1021atwr.c

@@ -439,7 +439,7 @@ void board_init_f(ulong dummy)
 	 * in last boot.
 	 */
 	if (is_warm_boot()) {
-		second_uboot = (void (*)(void))CONFIG_SYS_TEXT_BASE;
+		second_uboot = (void (*)(void))CONFIG_TEXT_BASE;
 		second_uboot();
 	}
 

board/freescale/ls1028a/Kconfig

@@ -15,7 +15,7 @@ config SYS_CONFIG_NAME
 config EMMC_BOOT
 	bool "Support for booting from EMMC"
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x96000000 if SD_BOOT || EMMC_BOOT
 	default 0x82000000 if TFABOOT
 	default 0x20100000
@@ -51,7 +51,7 @@ config SYS_CONFIG_NAME
 config EMMC_BOOT
 	bool "Support for booting from EMMC"
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0x96000000 if SD_BOOT || EMMC_BOOT
 	default 0x82000000 if TFABOOT
 	default 0x20100000

board/google/chromebook_coral/Kconfig

@@ -12,7 +12,7 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "chromebook_coral"
 
-config SYS_TEXT_BASE
+config TEXT_BASE
 	default 0xffe00000
 
 config BOARD_SPECIFIC_OPTIONS # dummy