mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2025-10-02 19:22:00 +02:00
net: rtl8139: Move functions around
Just move functions around in preparation for easy DM conversion, rename rtl_bcast_addr() to rtl8139_bcast_addr(), no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
This commit is contained in:
parent
0e5a4117a5
commit
6ee6caaf03
@ -190,104 +190,13 @@
|
|||||||
#define RTL_STS_RXBADALIGN BIT(1)
|
#define RTL_STS_RXBADALIGN BIT(1)
|
||||||
#define RTL_STS_RXSTATUSOK BIT(0)
|
#define RTL_STS_RXSTATUSOK BIT(0)
|
||||||
|
|
||||||
static int ioaddr;
|
|
||||||
static unsigned int cur_rx, cur_tx;
|
static unsigned int cur_rx, cur_tx;
|
||||||
|
static int ioaddr;
|
||||||
|
|
||||||
/* The RTL8139 can only transmit from a contiguous, aligned memory block. */
|
/* The RTL8139 can only transmit from a contiguous, aligned memory block. */
|
||||||
static unsigned char tx_buffer[TX_BUF_SIZE] __aligned(4);
|
static unsigned char tx_buffer[TX_BUF_SIZE] __aligned(4);
|
||||||
static unsigned char rx_ring[RX_BUF_LEN + 16] __aligned(4);
|
static unsigned char rx_ring[RX_BUF_LEN + 16] __aligned(4);
|
||||||
|
|
||||||
static int rtl8139_init(struct eth_device *dev, bd_t *bis);
|
|
||||||
static int rtl8139_read_eeprom(unsigned int location, unsigned int addr_len);
|
|
||||||
static void rtl8139_reset(struct eth_device *dev);
|
|
||||||
static int rtl8139_send(struct eth_device *dev, void *packet, int length);
|
|
||||||
static int rtl8139_recv(struct eth_device *dev);
|
|
||||||
static void rtl8139_stop(struct eth_device *dev);
|
|
||||||
static int rtl_bcast_addr(struct eth_device *dev, const u8 *bcast_mac, int join)
|
|
||||||
{
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
static struct pci_device_id supported[] = {
|
|
||||||
{ PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139 },
|
|
||||||
{ PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_8139 },
|
|
||||||
{ }
|
|
||||||
};
|
|
||||||
|
|
||||||
int rtl8139_initialize(bd_t *bis)
|
|
||||||
{
|
|
||||||
struct eth_device *dev;
|
|
||||||
int card_number = 0;
|
|
||||||
pci_dev_t devno;
|
|
||||||
int idx = 0;
|
|
||||||
u32 iobase;
|
|
||||||
|
|
||||||
while (1) {
|
|
||||||
/* Find RTL8139 */
|
|
||||||
devno = pci_find_devices(supported, idx++);
|
|
||||||
if (devno < 0)
|
|
||||||
break;
|
|
||||||
|
|
||||||
pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
|
|
||||||
iobase &= ~0xf;
|
|
||||||
|
|
||||||
debug("rtl8139: REALTEK RTL8139 @0x%x\n", iobase);
|
|
||||||
|
|
||||||
dev = (struct eth_device *)malloc(sizeof(*dev));
|
|
||||||
if (!dev) {
|
|
||||||
printf("Can not allocate memory of rtl8139\n");
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
memset(dev, 0, sizeof(*dev));
|
|
||||||
|
|
||||||
sprintf(dev->name, "RTL8139#%d", card_number);
|
|
||||||
|
|
||||||
dev->priv = (void *)devno;
|
|
||||||
dev->iobase = (int)bus_to_phys(iobase);
|
|
||||||
dev->init = rtl8139_init;
|
|
||||||
dev->halt = rtl8139_stop;
|
|
||||||
dev->send = rtl8139_send;
|
|
||||||
dev->recv = rtl8139_recv;
|
|
||||||
dev->mcast = rtl_bcast_addr;
|
|
||||||
|
|
||||||
eth_register(dev);
|
|
||||||
|
|
||||||
card_number++;
|
|
||||||
|
|
||||||
pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
|
|
||||||
|
|
||||||
udelay(10 * 1000);
|
|
||||||
}
|
|
||||||
|
|
||||||
return card_number;
|
|
||||||
}
|
|
||||||
|
|
||||||
static int rtl8139_init(struct eth_device *dev, bd_t *bis)
|
|
||||||
{
|
|
||||||
unsigned short *ap = (unsigned short *)dev->enetaddr;
|
|
||||||
int addr_len, i;
|
|
||||||
u8 reg;
|
|
||||||
|
|
||||||
ioaddr = dev->iobase;
|
|
||||||
|
|
||||||
/* Bring the chip out of low-power mode. */
|
|
||||||
outb(0x00, ioaddr + RTL_REG_CONFIG1);
|
|
||||||
|
|
||||||
addr_len = rtl8139_read_eeprom(0, 8) == 0x8129 ? 8 : 6;
|
|
||||||
for (i = 0; i < 3; i++)
|
|
||||||
*ap++ = le16_to_cpu(rtl8139_read_eeprom(i + 7, addr_len));
|
|
||||||
|
|
||||||
rtl8139_reset(dev);
|
|
||||||
|
|
||||||
reg = inb(ioaddr + RTL_REG_MEDIASTATUS);
|
|
||||||
if (reg & RTL_REG_MEDIASTATUS_MSRLINKFAIL) {
|
|
||||||
printf("Cable not connected or other link failure\n");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Serial EEPROM section. */
|
/* Serial EEPROM section. */
|
||||||
|
|
||||||
/* EEPROM_Ctrl bits. */
|
/* EEPROM_Ctrl bits. */
|
||||||
@ -575,9 +484,95 @@ static int rtl8139_recv(struct eth_device *dev)
|
|||||||
return length;
|
return length;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static int rtl8139_init(struct eth_device *dev, bd_t *bis)
|
||||||
|
{
|
||||||
|
unsigned short *ap = (unsigned short *)dev->enetaddr;
|
||||||
|
int addr_len, i;
|
||||||
|
u8 reg;
|
||||||
|
|
||||||
|
ioaddr = dev->iobase;
|
||||||
|
|
||||||
|
/* Bring the chip out of low-power mode. */
|
||||||
|
outb(0x00, ioaddr + RTL_REG_CONFIG1);
|
||||||
|
|
||||||
|
addr_len = rtl8139_read_eeprom(0, 8) == 0x8129 ? 8 : 6;
|
||||||
|
for (i = 0; i < 3; i++)
|
||||||
|
*ap++ = le16_to_cpu(rtl8139_read_eeprom(i + 7, addr_len));
|
||||||
|
|
||||||
|
rtl8139_reset(dev);
|
||||||
|
|
||||||
|
reg = inb(ioaddr + RTL_REG_MEDIASTATUS);
|
||||||
|
if (reg & RTL_REG_MEDIASTATUS_MSRLINKFAIL) {
|
||||||
|
printf("Cable not connected or other link failure\n");
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
static void rtl8139_stop(struct eth_device *dev)
|
static void rtl8139_stop(struct eth_device *dev)
|
||||||
{
|
{
|
||||||
ioaddr = dev->iobase;
|
ioaddr = dev->iobase;
|
||||||
|
|
||||||
rtl8139_hw_reset(dev);
|
rtl8139_hw_reset(dev);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static int rtl8139_bcast_addr(struct eth_device *dev, const u8 *bcast_mac,
|
||||||
|
int join)
|
||||||
|
{
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct pci_device_id supported[] = {
|
||||||
|
{ PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139 },
|
||||||
|
{ PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_8139 },
|
||||||
|
{ }
|
||||||
|
};
|
||||||
|
|
||||||
|
int rtl8139_initialize(bd_t *bis)
|
||||||
|
{
|
||||||
|
struct eth_device *dev;
|
||||||
|
int card_number = 0;
|
||||||
|
pci_dev_t devno;
|
||||||
|
int idx = 0;
|
||||||
|
u32 iobase;
|
||||||
|
|
||||||
|
while (1) {
|
||||||
|
/* Find RTL8139 */
|
||||||
|
devno = pci_find_devices(supported, idx++);
|
||||||
|
if (devno < 0)
|
||||||
|
break;
|
||||||
|
|
||||||
|
pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
|
||||||
|
iobase &= ~0xf;
|
||||||
|
|
||||||
|
debug("rtl8139: REALTEK RTL8139 @0x%x\n", iobase);
|
||||||
|
|
||||||
|
dev = (struct eth_device *)malloc(sizeof(*dev));
|
||||||
|
if (!dev) {
|
||||||
|
printf("Can not allocate memory of rtl8139\n");
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
memset(dev, 0, sizeof(*dev));
|
||||||
|
|
||||||
|
sprintf(dev->name, "RTL8139#%d", card_number);
|
||||||
|
|
||||||
|
dev->priv = (void *)devno;
|
||||||
|
dev->iobase = (int)bus_to_phys(iobase);
|
||||||
|
dev->init = rtl8139_init;
|
||||||
|
dev->halt = rtl8139_stop;
|
||||||
|
dev->send = rtl8139_send;
|
||||||
|
dev->recv = rtl8139_recv;
|
||||||
|
dev->mcast = rtl8139_bcast_addr;
|
||||||
|
|
||||||
|
eth_register(dev);
|
||||||
|
|
||||||
|
card_number++;
|
||||||
|
|
||||||
|
pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
|
||||||
|
|
||||||
|
udelay(10 * 1000);
|
||||||
|
}
|
||||||
|
|
||||||
|
return card_number;
|
||||||
|
}
|
||||||
|
Loading…
x
Reference in New Issue
Block a user