From 7d212af2b1cf19c643368668fafd2525fda26277 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:11 -0500 Subject: [PATCH 01/41] usb: Update USB_STORAGE dependencies As it's no longer possible to have !DM_USB set, we can remove these dependencies. Signed-off-by: Tom Rini Reviewed-by: Simon Glass --- common/spl/Kconfig | 2 +- drivers/usb/Kconfig | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 1657c2ca969..f0f7acead74 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1347,7 +1347,7 @@ config SPL_USB_HOST config SPL_USB_STORAGE bool "Support loading from USB" - depends on SPL_USB_HOST && !(BLK && !DM_USB) + depends on SPL_USB_HOST help Enable support for USB devices in SPL. This allows use of USB devices such as hard drives and flash drivers for loading U-Boot. diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 3afb45d5ccb..8efd4614573 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -93,7 +93,6 @@ comment "USB peripherals" config USB_STORAGE bool "USB Mass Storage support" - depends on !(BLK && !DM_USB) ---help--- Say Y here if you want to connect USB mass storage devices to your board's USB port. From 4475d017c57f93dca61c08563b3ff4202d38a127 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:12 -0500 Subject: [PATCH 02/41] arm: exynos5: Migrate USB_BOOTING to Kconfig This symbol is enabled for all exynos5 platforms, move to Kconfig and select it. Cc: Jaehoon Chung Cc: Minkyu Kang Signed-off-by: Tom Rini --- arch/arm/mach-exynos/Kconfig | 4 ++++ include/configs/exynos5-common.h | 1 - 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 29e35e443c6..383af83066e 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -4,6 +4,9 @@ config BOARD_COMMON def_bool y depends on !TARGET_SMDKV310 && !TARGET_ARNDALE +config USB_BOOTING + bool + choice prompt "EXYNOS architecture type select" optional @@ -24,6 +27,7 @@ config ARCH_EXYNOS5 select BOARD_EARLY_INIT_F select CPU_V7A select SHA_HW_ACCEL + select USB_BOOTING imply CMD_HASH imply CRC32_VERIFY imply HASH_VERIFY diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index dd322c2b3a7..9b5c329bda1 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -58,7 +58,6 @@ /* USB */ /* USB boot mode */ -#define CONFIG_USB_BOOTING #define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070 #define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002 #define EXYNOS_IRAM_SECONDARY_BASE 0x02020018 From b41eb5a27e8cf6d32e68ea70ab0b5226329db154 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:13 -0500 Subject: [PATCH 03/41] p1_p2_rdb: Remove unused environment sections The CONFIG_USB_FAT_BOOT, CONFIG_USB_EXT2_BOOT and CONFIG_NORBOOT defines are not referenced anywhere, so remove them. Signed-off-by: Tom Rini --- include/configs/p1_p2_rdb_pc.h | 25 ------------------------- 1 file changed, 25 deletions(-) diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 49c5aef3059..f86b96b2141 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -441,29 +441,4 @@ RST_PCIE_CMD(pciboot) \ RST_DEF_CMD(defboot) \ "" -#define CONFIG_USB_FAT_BOOT \ -"setenv bootargs root=/dev/ram rw " \ -"console=$consoledev,$baudrate $othbootargs " \ -"ramdisk_size=$ramdisk_size;" \ -"usb start;" \ -"fatload usb 0:2 $loadaddr $bootfile;" \ -"fatload usb 0:2 $fdtaddr $fdtfile;" \ -"fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ -"bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_USB_EXT2_BOOT \ -"setenv bootargs root=/dev/ram rw " \ -"console=$consoledev,$baudrate $othbootargs " \ -"ramdisk_size=$ramdisk_size;" \ -"usb start;" \ -"ext2load usb 0:4 $loadaddr $bootfile;" \ -"ext2load usb 0:4 $fdtaddr $fdtfile;" \ -"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ -"bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_NORBOOT \ -"setenv bootargs root=/dev/$jffs2nor rw " \ -"console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ -"bootm $norbootaddr - $norfdtaddr" - #endif /* __CONFIG_H */ From 5732cf24ddfe010cd18de2233b9f175fa11f004f Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:14 -0500 Subject: [PATCH 04/41] x530: Remove unused symbols The symbols CONFIG_UBI_PART and CONFIG_UBIFS_VOLUME are not referenced anywhere, drop them. Signed-off-by: Tom Rini --- include/configs/x530.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/include/configs/x530.h b/include/configs/x530.h index c213dc6074b..4cf41f52fd7 100644 --- a/include/configs/x530.h +++ b/include/configs/x530.h @@ -51,7 +51,4 @@ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" -#define CONFIG_UBI_PART user -#define CONFIG_UBIFS_VOLUME user - #endif /* _CONFIG_X530_H */ From 5125e136a9a667ace526fbb968500ff39011e6b4 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:15 -0500 Subject: [PATCH 05/41] arm: trats2: Set mmcdev directly Only this platform sets mmcdev via CONFIG_MMC_DEFAULT_DEV so we hard-code that default directly. Signed-off-by: Tom Rini --- include/configs/exynos4-common.h | 3 --- include/configs/s5p_goni.h | 3 --- include/configs/trats2.h | 2 +- 3 files changed, 1 insertion(+), 7 deletions(-) diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index 81f450cde6c..bf965e5cedb 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -10,9 +10,6 @@ #include "exynos-common.h" -/* SD/MMC configuration */ -#define CONFIG_MMC_DEFAULT_DEV 0 - #define DFU_DEFAULT_POLL_TIMEOUT 300 /* USB Samsung's IDs */ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index fdade1ee66f..97f5dd0e473 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -119,9 +119,6 @@ #define PHYS_SDRAM_3 0x50000000 /* mDDR DMC2 Bank #2 */ #define PHYS_SDRAM_3_SIZE (128 << 20) /* 128 MB in Bank #2 */ -/* FLASH and environment organization */ -#define CONFIG_MMC_DEFAULT_DEV 0 - #define CFG_SYS_ONENAND_BASE 0xB0000000 #endif /* __CONFIG_H */ diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 0aa331e3935..4d39b4005bd 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -81,7 +81,7 @@ "${kernelname}\0" \ "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \ "${fdtfile}\0" \ - "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \ + "mmcdev=0\0" \ "mmcbootpart=2\0" \ "mmcrootpart=5\0" \ "opts=always_resume=1\0" \ From 2440b5bb523b004af43a1090e1a4134231702416 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:16 -0500 Subject: [PATCH 06/41] Convert CONFIG_HSMMC2_8BIT to Kconfig This converts the following to Kconfig: CONFIG_HSMMC2_8BIT Signed-off-by: Tom Rini --- configs/am335x_shc_defconfig | 1 + configs/am335x_shc_ict_defconfig | 1 + configs/am335x_shc_netboot_defconfig | 1 + configs/am335x_shc_sdboot_defconfig | 1 + configs/am57xx_evm_defconfig | 1 + configs/am57xx_hs_evm_defconfig | 1 + configs/am57xx_hs_evm_usb_defconfig | 1 + configs/cm_t43_defconfig | 1 + configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_hs_evm_defconfig | 1 + configs/dra7xx_hs_evm_usb_defconfig | 1 + configs/omap5_uevm_defconfig | 1 + drivers/mmc/Kconfig | 5 +++++ include/configs/am335x_shc.h | 2 -- include/configs/am57xx_evm.h | 3 --- include/configs/cm_t43.h | 2 -- include/configs/dra7xx_evm.h | 3 --- include/configs/omap5_uevm.h | 3 --- 18 files changed, 17 insertions(+), 13 deletions(-) diff --git a/configs/am335x_shc_defconfig b/configs/am335x_shc_defconfig index 9d81f8d0ad7..5a6db3ce6a4 100644 --- a/configs/am335x_shc_defconfig +++ b/configs/am335x_shc_defconfig @@ -72,6 +72,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_SLAVE=0x1 CONFIG_SYS_I2C_SPEED=400000 CONFIG_MMC_OMAP_HS=y +CONFIG_HSMMC2_8BIT=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_SMSC=y CONFIG_MII=y diff --git a/configs/am335x_shc_ict_defconfig b/configs/am335x_shc_ict_defconfig index de83139d151..aa55a7a61e5 100644 --- a/configs/am335x_shc_ict_defconfig +++ b/configs/am335x_shc_ict_defconfig @@ -70,6 +70,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_SLAVE=0x1 CONFIG_SYS_I2C_SPEED=400000 CONFIG_MMC_OMAP_HS=y +CONFIG_HSMMC2_8BIT=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_SMSC=y CONFIG_MII=y diff --git a/configs/am335x_shc_netboot_defconfig b/configs/am335x_shc_netboot_defconfig index e1dfd6a9bd1..cb73b104d23 100644 --- a/configs/am335x_shc_netboot_defconfig +++ b/configs/am335x_shc_netboot_defconfig @@ -73,6 +73,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_SLAVE=0x1 CONFIG_SYS_I2C_SPEED=400000 CONFIG_MMC_OMAP_HS=y +CONFIG_HSMMC2_8BIT=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_SMSC=y CONFIG_MII=y diff --git a/configs/am335x_shc_sdboot_defconfig b/configs/am335x_shc_sdboot_defconfig index 74f0834466d..f28e6e6b160 100644 --- a/configs/am335x_shc_sdboot_defconfig +++ b/configs/am335x_shc_sdboot_defconfig @@ -72,6 +72,7 @@ CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_SLAVE=0x1 CONFIG_SYS_I2C_SPEED=400000 CONFIG_MMC_OMAP_HS=y +CONFIG_HSMMC2_8BIT=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_SMSC=y CONFIG_MII=y diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig index 054e9747a8b..03f799506e1 100644 --- a/configs/am57xx_evm_defconfig +++ b/configs/am57xx_evm_defconfig @@ -92,6 +92,7 @@ CONFIG_MISC=y CONFIG_SYS_I2C_EEPROM_ADDR=0x50 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_OMAP_HS=y +CONFIG_HSMMC2_8BIT=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=76800000 diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig index 02a2543a3f0..86bcfe85ae3 100644 --- a/configs/am57xx_hs_evm_defconfig +++ b/configs/am57xx_hs_evm_defconfig @@ -89,6 +89,7 @@ CONFIG_MISC=y CONFIG_SYS_I2C_EEPROM_ADDR=0x50 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_OMAP_HS=y +CONFIG_HSMMC2_8BIT=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=76800000 diff --git a/configs/am57xx_hs_evm_usb_defconfig b/configs/am57xx_hs_evm_usb_defconfig index 84eca42aac0..eedbfd0d865 100644 --- a/configs/am57xx_hs_evm_usb_defconfig +++ b/configs/am57xx_hs_evm_usb_defconfig @@ -88,6 +88,7 @@ CONFIG_MISC=y CONFIG_SYS_I2C_EEPROM_ADDR=0x50 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_OMAP_HS=y +CONFIG_HSMMC2_8BIT=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=76800000 diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig index 867ca303205..6eda33ebbc0 100644 --- a/configs/cm_t43_defconfig +++ b/configs/cm_t43_defconfig @@ -76,6 +76,7 @@ CONFIG_SYS_RX_ETH_BUFFER=64 CONFIG_SYS_I2C_LEGACY=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_MMC_OMAP_HS=y +CONFIG_HSMMC2_8BIT=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_ONFI_DETECTION=y diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index d91cf3e1301..41df92f3d28 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -101,6 +101,7 @@ CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_SPL_MMC_HS200_SUPPORT=y CONFIG_MMC_OMAP_HS=y +CONFIG_HSMMC2_8BIT=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig index 195bc0e4ee0..7392b730853 100644 --- a/configs/dra7xx_hs_evm_defconfig +++ b/configs/dra7xx_hs_evm_defconfig @@ -96,6 +96,7 @@ CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_SPL_MMC_HS200_SUPPORT=y CONFIG_MMC_OMAP_HS=y +CONFIG_HSMMC2_8BIT=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_ONFI_DETECTION=y diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig index 99cdbbc02f8..1bda6db7a36 100644 --- a/configs/dra7xx_hs_evm_usb_defconfig +++ b/configs/dra7xx_hs_evm_usb_defconfig @@ -92,6 +92,7 @@ CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_SPL_MMC_HS200_SUPPORT=y CONFIG_MMC_OMAP_HS=y +CONFIG_HSMMC2_8BIT=y CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=76800000 diff --git a/configs/omap5_uevm_defconfig b/configs/omap5_uevm_defconfig index 91878c11ed4..9d5c515a44c 100644 --- a/configs/omap5_uevm_defconfig +++ b/configs/omap5_uevm_defconfig @@ -52,6 +52,7 @@ CONFIG_SYS_I2C_LEGACY=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_OMAP_HS=y +CONFIG_HSMMC2_8BIT=y CONFIG_PALMAS_POWER=y CONFIG_SCSI=y CONFIG_SCSI_AHCI_PLAT=y diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index bf4d994ff69..698c91c57f4 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -385,6 +385,11 @@ config MMC_OMAP36XX_PINS If unsure, say N. +config HSMMC2_8BIT + bool "Enable 8-bit interface for eMMC (interface #2)" + depends on MMC_OMAP_HS && (OMAP44XX || OMAP54XX || DRA7XX || AM33XX || \ + AM43XX || ARCH_KEYSTONE) + config SH_SDHI bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support" depends on ARCH_RMOBILE diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index 452887d6995..70645edcb14 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -20,8 +20,6 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) -#define CONFIG_HSMMC2_8BIT - #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index dacfd41cced..ba91f2b0545 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -35,9 +35,6 @@ #include -/* Enhance our eMMC support / experience. */ -#define CONFIG_HSMMC2_8BIT - /* CPSW Ethernet */ #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index fcc17fc6b7c..8a18d6f97ab 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -36,8 +36,6 @@ * we don't need to do it twice. */ -#define CONFIG_HSMMC2_8BIT - #include #define V_OSCK 24000000 /* Clock output from T2 */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index ac3fcacc68e..b8f518612ee 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -48,9 +48,6 @@ #include -/* Enhance our eMMC support / experience. */ -#define CONFIG_HSMMC2_8BIT - /* * Default to using SPI for environment, etc. * 0x000000 - 0x040000 : QSPI.SPL (256KiB) diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index d7fa2d43914..39d0b403139 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -32,9 +32,6 @@ /* MMC ENV related defines */ -/* Enhance our eMMC support / experience. */ -#define CONFIG_HSMMC2_8BIT - /* Required support for the TCA642X GPIO we have on the uEVM */ #define CFG_SYS_I2C_TCA642X_BUS_NUM 4 #define CFG_SYS_I2C_TCA642X_ADDR 0x22 From 6bd2372094ab4827547ec0d3e5a258b72810cafd Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:17 -0500 Subject: [PATCH 07/41] env: Rework ENV_IS_EMBEDDED and related logic slightly - Drop CONFIG_BUILD_ENVCRC as this is never set directly but instead means ENV_IS_EMBEDDED, so reference that in code and rename the Makefile usage to BUILD_ENVCRC. - Remove extra-$(CONFIG_ENV_IS_EMBEDDED) line as it could never be true, and likely why there is an extra- line for CONFIG_ENV_IS_IN_FLASH (the only use case today of embedded environments). - With these slight changes we can then see that using the calculated symbol of ENV_IS_EMBEDDED is the right thing to use in any code which needs to know this situation and can remove CONFIG_ENV_IS_EMBEDDED entirely. Signed-off-by: Tom Rini --- README | 5 ----- env/Makefile | 1 - env/embedded.c | 2 +- include/env_internal.h | 23 +---------------------- tools/Makefile | 5 ++--- tools/envcrc.c | 10 +++------- 6 files changed, 7 insertions(+), 39 deletions(-) diff --git a/README b/README index 103562bbbe8..3fef1d2afa0 100644 --- a/README +++ b/README @@ -1542,11 +1542,6 @@ The following definitions that deal with the placement and management of environment data (variable area); in general, we support the following configurations: -- CONFIG_BUILD_ENVCRC: - - Builds up envcrc with the target environment so that external utils - may easily extract it and embed it in final U-Boot images. - BE CAREFUL! The first access to the environment happens quite early in U-Boot initialization (when we try to get the setting of for the console baudrate). You *MUST* have mapped your NVRAM area then, or diff --git a/env/Makefile b/env/Makefile index c4ad6543286..bb6e24b396d 100644 --- a/env/Makefile +++ b/env/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += flags.o ifndef CONFIG_SPL_BUILD obj-y += callback.o obj-$(CONFIG_ENV_IS_IN_EEPROM) += eeprom.o -extra-$(CONFIG_ENV_IS_EMBEDDED) += embedded.o obj-$(CONFIG_ENV_IS_IN_EEPROM) += embedded.o extra-$(CONFIG_ENV_IS_IN_FLASH) += embedded.o obj-$(CONFIG_ENV_IS_IN_NVRAM) += embedded.o diff --git a/env/embedded.c b/env/embedded.c index 27fb45bf8c3..7cbe54c56e0 100644 --- a/env/embedded.c +++ b/env/embedded.c @@ -27,7 +27,7 @@ * Generate embedded environment table * inside U-Boot image, if needed. */ -#if defined(ENV_IS_EMBEDDED) || defined(CONFIG_BUILD_ENVCRC) +#if defined(ENV_IS_EMBEDDED) /* * Put the environment in the .text section when we are building * U-Boot proper. The host based program "tools/envcrc" does not need diff --git a/include/env_internal.h b/include/env_internal.h index f30fd6159d8..aee6b3e48fa 100644 --- a/include/env_internal.h +++ b/include/env_internal.h @@ -41,10 +41,6 @@ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) # define ENV_IS_EMBEDDED # endif -# ifdef CONFIG_ENV_IS_EMBEDDED -# error "do not define CONFIG_ENV_IS_EMBEDDED in your board config" -# error "it is calculated automatically for you" -# endif #endif /* CONFIG_ENV_IS_IN_FLASH */ #if defined(CONFIG_ENV_IS_IN_NAND) @@ -57,23 +53,6 @@ extern unsigned long nand_env_oob_offset; # endif /* CONFIG_ENV_OFFSET_OOB */ #endif /* CONFIG_ENV_IS_IN_NAND */ -/* - * For the flash types where embedded env is supported, but it cannot be - * calculated automatically (i.e. NAND), take the board opt-in. - */ -#if defined(CONFIG_ENV_IS_EMBEDDED) && !defined(ENV_IS_EMBEDDED) -# define ENV_IS_EMBEDDED -#endif - -/* The build system likes to know if the env is embedded */ -#ifdef DO_DEPS_ONLY -# ifdef ENV_IS_EMBEDDED -# ifndef CONFIG_ENV_IS_EMBEDDED -# define CONFIG_ENV_IS_EMBEDDED -# endif -# endif -#endif - #include "compiler.h" #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT @@ -88,7 +67,7 @@ extern unsigned long nand_env_oob_offset; * If the environment is in RAM, allocate extra space for it in the malloc * region. */ -#if defined(CONFIG_ENV_IS_EMBEDDED) +#if defined(ENV_IS_EMBEDDED) #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN #elif (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE < CONFIG_SYS_MONITOR_BASE) || \ (CONFIG_ENV_ADDR >= CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) || \ diff --git a/tools/Makefile b/tools/Makefile index 80bc62befcb..edfa40903d9 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -36,21 +36,20 @@ endif subdir-$(HOST_TOOLS_ALL) += gdb # Merge all the different vars for envcrc into one -ENVCRC-$(CONFIG_ENV_IS_EMBEDDED) = y ENVCRC-$(CONFIG_ENV_IS_IN_EEPROM) = y ENVCRC-$(CONFIG_ENV_IS_IN_FLASH) = y ENVCRC-$(CONFIG_ENV_IS_IN_ONENAND) = y ENVCRC-$(CONFIG_ENV_IS_IN_NAND) = y ENVCRC-$(CONFIG_ENV_IS_IN_NVRAM) = y ENVCRC-$(CONFIG_ENV_IS_IN_SPI_FLASH) = y -CONFIG_BUILD_ENVCRC ?= $(ENVCRC-y) +BUILD_ENVCRC ?= $(ENVCRC-y) hostprogs-$(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER) += atmel_pmecc_params hostprogs-$(CONFIG_VIDEO_LOGO) += bmp_logo HOSTCFLAGS_bmp_logo.o := -pedantic -hostprogs-$(CONFIG_BUILD_ENVCRC) += envcrc +hostprogs-$(BUILD_ENVCRC) += envcrc envcrc-objs := envcrc.o lib/crc32.o env/embedded.o lib/sha1.o hostprogs-$(CONFIG_CMD_NET) += gen_eth_addr diff --git a/tools/envcrc.c b/tools/envcrc.c index a021c785aee..550f31038bd 100644 --- a/tools/envcrc.c +++ b/tools/envcrc.c @@ -40,10 +40,6 @@ # endif #endif /* CONFIG_ENV_IS_IN_FLASH */ -#if defined(ENV_IS_EMBEDDED) && !defined(CONFIG_BUILD_ENVCRC) -# define CONFIG_BUILD_ENVCRC -#endif - #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT # define ENV_HEADER_SIZE (sizeof(uint32_t) + 1) #else @@ -53,17 +49,17 @@ #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE) -#ifdef CONFIG_BUILD_ENVCRC +#ifdef ENV_IS_EMBEDDED # include extern unsigned int env_size; extern env_t embedded_environment; -#endif /* CONFIG_BUILD_ENVCRC */ +#endif /* ENV_IS_EMBEDDED */ extern uint32_t crc32(uint32_t, const unsigned char *, unsigned int); int main (int argc, char **argv) { -#ifdef CONFIG_BUILD_ENVCRC +#ifdef ENV_IS_EMBEDDED unsigned char pad = 0x00; uint32_t crc; unsigned char *envptr = (unsigned char *)&embedded_environment, From 9b0240f8c6a1caa42da73835090fcb6db60f3d23 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:18 -0500 Subject: [PATCH 08/41] Convert CONFIG_DM9000_BYTE_SWAPPED et al to Kconfig This converts the following to Kconfig: CONFIG_DM9000_BYTE_SWAPPED CONFIG_DM9000_NO_SROM CONFIG_DM9000_USE_16BIT CONFIG_DM9000_DEBUG CONFIG_MXC_GPT_HCLK CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC Signed-off-by: Tom Rini --- arch/arm/Kconfig | 2 ++ arch/arm/mach-imx/Kconfig | 3 +++ board/davinci/da8xxevm/Kconfig | 3 +++ board/timll/devkit8000/devkit8000.c | 7 +++---- configs/M5253DEMO_defconfig | 1 + configs/at91sam9261ek_dataflash_cs0_defconfig | 2 ++ configs/at91sam9261ek_dataflash_cs3_defconfig | 2 ++ configs/at91sam9261ek_nandflash_defconfig | 2 ++ configs/devkit8000_defconfig | 2 ++ drivers/net/Kconfig | 12 ++++++++++++ include/configs/M5253DEMO.h | 6 ------ include/configs/at91sam9261ek.h | 7 ------- include/configs/brppt2.h | 2 -- include/configs/ci20.h | 7 ------- include/configs/devkit8000.h | 11 ----------- include/configs/mx6_common.h | 1 - include/configs/mx7_common.h | 1 - include/configs/omapl138_lcdk.h | 1 - 18 files changed, 32 insertions(+), 40 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d3b11b84959..8381e09e102 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -915,6 +915,7 @@ config ARCH_MX7 select CPU_V7A select GPIO_EXTRA_HEADER select MACH_IMX + select MXC_GPT_HCLK select SYS_FSL_HAS_SEC select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE @@ -928,6 +929,7 @@ config ARCH_MX6 select CPU_V7A select GPIO_EXTRA_HEADER select MACH_IMX + select MXC_GPT_HCLK select SYS_FSL_HAS_SEC select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ee5f1996a83..3266545c266 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -18,6 +18,9 @@ config SYSCOUNTER_TIMER config GPT_TIMER bool +config MXC_GPT_HCLK + bool + config IMX_RDC bool "i.MX Resource domain controller driver" depends on ARCH_MX6 || ARCH_MX7 diff --git a/board/davinci/da8xxevm/Kconfig b/board/davinci/da8xxevm/Kconfig index c5499a63fd3..34055f69754 100644 --- a/board/davinci/da8xxevm/Kconfig +++ b/board/davinci/da8xxevm/Kconfig @@ -37,6 +37,9 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "omapl138_lcdk" +config NAND_6BYTES_OOB_FREE_10BYTES_ECC + def_bool y + endif source "board/ti/common/Kconfig" diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index 0808ca1a54c..06009d8ad54 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -76,10 +76,11 @@ int board_init(void) } /* Configure GPMC registers for DM9000 */ +#define DM9000_BASE 0x2c000000 static void gpmc_dm9000_config(void) { enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[6], - CONFIG_DM9000_BASE, GPMC_SIZE_16M); + DM9000_BASE, GPMC_SIZE_16M); } /* @@ -100,9 +101,7 @@ int misc_init_r(void) #endif #ifdef CONFIG_DRIVER_DM9000 - /* Configure GPMC registers for DM9000 */ - enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[6], - CONFIG_DM9000_BASE, GPMC_SIZE_16M); + gpmc_dm9000_config(); /* Use OMAP DIE_ID as MAC address */ if (!eth_env_get_enetaddr("ethaddr", enetaddr)) { diff --git a/configs/M5253DEMO_defconfig b/configs/M5253DEMO_defconfig index 581023f967b..2684ce05f26 100644 --- a/configs/M5253DEMO_defconfig +++ b/configs/M5253DEMO_defconfig @@ -44,4 +44,5 @@ CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_MAX_FLASH_SECT=2048 CONFIG_USE_SYS_MAX_FLASH_BANKS=y CONFIG_DRIVER_DM9000=y +CONFIG_DM9000_BYTE_SWAPPED=y CONFIG_MCFUART=y diff --git a/configs/at91sam9261ek_dataflash_cs0_defconfig b/configs/at91sam9261ek_dataflash_cs0_defconfig index c6c83b8da35..a398e6d97a1 100644 --- a/configs/at91sam9261ek_dataflash_cs0_defconfig +++ b/configs/at91sam9261ek_dataflash_cs0_defconfig @@ -54,6 +54,8 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y CONFIG_SPI_FLASH_DATAFLASH=y CONFIG_DRIVER_DM9000=y +CONFIG_DM9000_NO_SROM=y +CONFIG_DM9000_USE_16BIT=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y diff --git a/configs/at91sam9261ek_dataflash_cs3_defconfig b/configs/at91sam9261ek_dataflash_cs3_defconfig index 1c16d26c824..1b464ff2925 100644 --- a/configs/at91sam9261ek_dataflash_cs3_defconfig +++ b/configs/at91sam9261ek_dataflash_cs3_defconfig @@ -54,6 +54,8 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y CONFIG_SPI_FLASH_DATAFLASH=y CONFIG_DRIVER_DM9000=y +CONFIG_DM9000_NO_SROM=y +CONFIG_DM9000_USE_16BIT=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y diff --git a/configs/at91sam9261ek_nandflash_defconfig b/configs/at91sam9261ek_nandflash_defconfig index 8dbcb27f95c..f2326249425 100644 --- a/configs/at91sam9261ek_nandflash_defconfig +++ b/configs/at91sam9261ek_nandflash_defconfig @@ -52,6 +52,8 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y CONFIG_SPI_FLASH_DATAFLASH=y CONFIG_DRIVER_DM9000=y +CONFIG_DM9000_NO_SROM=y +CONFIG_DM9000_USE_16BIT=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index 8347b67681d..6fd4410df5b 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -84,4 +84,6 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 CONFIG_DRIVER_DM9000=y +CONFIG_DM9000_NO_SROM=y +CONFIG_DM9000_USE_16BIT=y CONFIG_JFFS2_NAND=y diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 4e5da5ab72a..0607f959da4 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -198,6 +198,18 @@ config DRIVER_DM9000 help The Davicom DM9000 parallel bus external ethernet interface chip. +config DM9000_BYTE_SWAPPED + bool "Byte swapped access for DM9000" + depends on DRIVER_DM9000 + +config DM9000_NO_SROM + bool "No SROM on DM9000" + depends on DRIVER_DM9000 + +config DM9000_USE_16BIT + bool "Use 16bit access in DM9000" + depends on DRIVER_DM9000 + config DWC_ETH_QOS bool "Synopsys DWC Ethernet QOS device support" select PHYLIB diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 7e37c6d1199..ad55938348e 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -20,12 +20,6 @@ env/embedded.o(.text*); #ifdef CONFIG_DRIVER_DM9000 -# define CONFIG_DM9000_BASE (CFG_SYS_CS1_BASE | 0x300) -# define DM9000_IO CONFIG_DM9000_BASE -# define DM9000_DATA (CONFIG_DM9000_BASE + 4) -# undef CONFIG_DM9000_DEBUG -# define CONFIG_DM9000_BYTE_SWAPPED - # define CONFIG_OVERWRITE_ETHADDR_ONCE # define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 56247e390bf..39f6ff8a725 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -34,13 +34,6 @@ #endif -/* Ethernet */ -#define CONFIG_DM9000_BASE 0x30000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 4) -#define CONFIG_DM9000_USE_16BIT -#define CONFIG_DM9000_NO_SROM - /* USB */ #define CFG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */ diff --git a/include/configs/brppt2.h b/include/configs/brppt2.h index d35c7c4a591..80104b2d319 100644 --- a/include/configs/brppt2.h +++ b/include/configs/brppt2.h @@ -16,8 +16,6 @@ #define CFG_SYS_PL310_BASE L2_PL310_BASE #endif /* !CONFIG_SYS_L2CACHE_OFF */ -#define CONFIG_MXC_GPT_HCLK - /* MMC */ /* Boot */ diff --git a/include/configs/ci20.h b/include/configs/ci20.h index 3329c24fa68..446d5c4f3da 100644 --- a/include/configs/ci20.h +++ b/include/configs/ci20.h @@ -17,11 +17,4 @@ /* NS16550-ish UARTs */ #define CFG_SYS_NS16550_CLK 48000000 -/* Ethernet: davicom DM9000 */ -#define CONFIG_DM9000_BASE 0xb6000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 2) - -/* Miscellaneous configuration options */ - #endif /* __CONFIG_CI20_H__ */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 46410595c2b..e3621fd6f9c 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -16,17 +16,6 @@ #include -/* Hardware drivers */ -/* DM9000 */ -#define CONFIG_DM9000_BASE 0x2c000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE + 0x400) -#define CONFIG_DM9000_USE_16BIT 1 -#define CONFIG_DM9000_NO_SROM 1 -#undef CONFIG_DM9000_DEBUG - -/* TWL4030 */ - /* BOOTP/DHCP options */ #define MEM_LAYOUT_ENV_SETTINGS \ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 245530aa640..dd8cabc2e93 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -16,7 +16,6 @@ #endif #endif -#define CONFIG_MXC_GPT_HCLK #include #include diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index d5af6990107..6e14b4fbf05 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -14,7 +14,6 @@ #include /* Timer settings */ -#define CONFIG_MXC_GPT_HCLK #define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */ /* Miscellaneous configurable options */ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 788a1113868..f19211fe647 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -109,7 +109,6 @@ #define CFG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE #define CFG_SYS_NAND_MASK_CLE 0x10 #define CFG_SYS_NAND_MASK_ALE 0x8 -#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC #define CFG_SYS_NAND_U_BOOT_SIZE SZ_512K #define CFG_SYS_NAND_U_BOOT_DST 0xc1080000 #define CFG_SYS_NAND_U_BOOT_START CFG_SYS_NAND_U_BOOT_DST From 21491883d2af674f698a94699a5a8b7356d02adf Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:19 -0500 Subject: [PATCH 09/41] fec_mxc: Remove CONFIG_FEC_FIXED_SPEED support This option is only used on one platform currently. However, with PHYLIB enabled, which this platform also does, this option is not checked and the functional use case is handled. Remove this code. Signed-off-by: Tom Rini --- doc/README.fec_mxc | 6 ------ drivers/net/fec_mxc.c | 4 ---- include/configs/brppt2.h | 3 --- 3 files changed, 13 deletions(-) diff --git a/doc/README.fec_mxc b/doc/README.fec_mxc index d17dfb676f7..4e890d348f4 100644 --- a/doc/README.fec_mxc +++ b/doc/README.fec_mxc @@ -22,12 +22,6 @@ CONFIG_FEC_MXC_PHYADDR Optional, selects the exact phy address that should be connected and function fecmxc_initialize will try to initialize it. -CONFIG_FEC_FIXED_SPEED - Optional, selects a fixed speed on the MAC interface without asking some - phy. This is usefull if there is a direct MAC <-> MAC connection, for - example if the CPU is connected directly via the RGMII interface to a - ethernet-switch. - Reading the ethaddr from the SoC eFuses: if CONFIG_FEC_MXC is defined and the U-Boot environment does not contain the ethaddr variable, then its value gets read from the corresponding eFuses in diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index a61a1fc7573..9cb235ad5e3 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -268,7 +268,6 @@ static int miiphy_restart_aneg(struct eth_device *dev) return ret; } -#ifndef CONFIG_FEC_FIXED_SPEED static int miiphy_wait_aneg(struct eth_device *dev) { uint32_t start; @@ -294,7 +293,6 @@ static int miiphy_wait_aneg(struct eth_device *dev) return 0; } -#endif /* CONFIG_FEC_FIXED_SPEED */ #endif static int fec_rx_task_enable(struct fec_priv *fec) @@ -536,8 +534,6 @@ static int fec_open(struct udevice *dev) } speed = fec->phydev->speed; } -#elif CONFIG_FEC_FIXED_SPEED - speed = CONFIG_FEC_FIXED_SPEED; #else miiphy_wait_aneg(edev); speed = miiphy_speed(edev->name, fec->phy_id); diff --git a/include/configs/brppt2.h b/include/configs/brppt2.h index 80104b2d319..984602c2cf7 100644 --- a/include/configs/brppt2.h +++ b/include/configs/brppt2.h @@ -78,9 +78,6 @@ BUR_COMMON_ENV \ #define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE -/* Ethernet */ -#define CONFIG_FEC_FIXED_SPEED _1000BASET - /* USB Configs */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) From 98fbad631f9973eb763d83571ec8dde00a94a76c Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:20 -0500 Subject: [PATCH 10/41] Convert CONFIG_FLASH_SHOW_PROGRESS to Kconfig This converts the following to Kconfig: CONFIG_FLASH_SHOW_PROGRESS Signed-off-by: Tom Rini --- README | 5 ----- configs/3c120_defconfig | 1 + configs/M5208EVBE_defconfig | 1 + configs/M5235EVB_Flash32_defconfig | 1 + configs/M5235EVB_defconfig | 1 + configs/M5249EVB_defconfig | 1 + configs/M5272C3_defconfig | 1 + configs/M5275EVB_defconfig | 1 + configs/M5282EVB_defconfig | 1 + configs/M53017EVB_defconfig | 1 + configs/M5329AFEE_defconfig | 1 + configs/M5329BFEE_defconfig | 1 + configs/M5373EVB_defconfig | 1 + configs/MCR3000_defconfig | 1 + configs/MPC837XERDB_defconfig | 1 + configs/MPC8548CDS_36BIT_defconfig | 1 + configs/MPC8548CDS_defconfig | 1 + configs/MPC8548CDS_legacy_defconfig | 1 + configs/ae350_rv32_defconfig | 1 + configs/ae350_rv32_spl_defconfig | 1 + configs/ae350_rv32_spl_xip_defconfig | 1 + configs/ae350_rv32_xip_defconfig | 1 + configs/ae350_rv64_defconfig | 1 + configs/ae350_rv64_spl_defconfig | 1 + configs/ae350_rv64_spl_xip_defconfig | 1 + configs/ae350_rv64_xip_defconfig | 1 + configs/amcore_defconfig | 1 + configs/astro_mcf5373l_defconfig | 1 + configs/at91sam9263ek_norflash_boot_defconfig | 1 + configs/at91sam9263ek_norflash_defconfig | 1 + configs/boston32r2_defconfig | 1 + configs/boston32r2el_defconfig | 1 + configs/boston32r6_defconfig | 1 + configs/boston32r6el_defconfig | 1 + configs/boston64r2_defconfig | 1 + configs/boston64r2el_defconfig | 1 + configs/boston64r6_defconfig | 1 + configs/boston64r6el_defconfig | 1 + configs/comtrend_ct5361_ram_defconfig | 1 + configs/comtrend_wap5813n_ram_defconfig | 1 + configs/da850evm_direct_nor_defconfig | 1 + configs/devkit3250_defconfig | 1 + configs/gazerbeam_defconfig | 1 + configs/huawei_hg556a_ram_defconfig | 1 + configs/integratorap_cm720t_defconfig | 1 + configs/integratorap_cm920t_defconfig | 1 + configs/integratorap_cm926ejs_defconfig | 1 + configs/integratorap_cm946es_defconfig | 1 + configs/integratorcp_cm1136_defconfig | 1 + configs/integratorcp_cm920t_defconfig | 1 + configs/integratorcp_cm926ejs_defconfig | 1 + configs/integratorcp_cm946es_defconfig | 1 + configs/j7200_evm_a72_defconfig | 1 + configs/j7200_evm_r5_defconfig | 1 + configs/j7200_hs_evm_a72_defconfig | 1 + configs/j7200_hs_evm_r5_defconfig | 1 + configs/j721e_evm_a72_defconfig | 1 + configs/j721e_evm_r5_defconfig | 1 + configs/j721e_hs_evm_a72_defconfig | 1 + configs/j721e_hs_evm_r5_defconfig | 1 + configs/j721s2_evm_a72_defconfig | 1 + configs/j721s2_evm_r5_defconfig | 1 + configs/j721s2_hs_evm_a72_defconfig | 1 + configs/j721s2_hs_evm_r5_defconfig | 1 + configs/kmcent2_defconfig | 1 + configs/kmcoge5ne_defconfig | 1 + configs/kmeter1_defconfig | 1 + configs/kmopti2_defconfig | 1 + configs/kmsupx5_defconfig | 1 + configs/kmtepr2_defconfig | 1 + configs/malta64_defconfig | 1 + configs/malta64el_defconfig | 1 + configs/malta_defconfig | 1 + configs/maltael_defconfig | 1 + configs/mccmon6_nor_defconfig | 1 + configs/mccmon6_sd_defconfig | 1 + configs/microblaze-generic_defconfig | 1 + configs/octeon_ebb7304_defconfig | 1 + configs/omap35_logic_somlv_defconfig | 1 + configs/omap3_logic_somlv_defconfig | 1 + configs/pm9261_defconfig | 1 + configs/pm9263_defconfig | 1 + configs/qemu-riscv32_defconfig | 1 + configs/qemu-riscv32_smode_defconfig | 1 + configs/qemu-riscv32_spl_defconfig | 1 + configs/qemu-riscv64_defconfig | 1 + configs/qemu-riscv64_smode_defconfig | 1 + configs/qemu-riscv64_spl_defconfig | 1 + configs/qemu_arm64_defconfig | 1 + configs/qemu_arm_defconfig | 1 + configs/r2dplus_defconfig | 1 + configs/sama5d3xek_mmc_defconfig | 1 + configs/sama5d3xek_nandflash_defconfig | 1 + configs/sama5d3xek_spiflash_defconfig | 1 + configs/sfr_nb4-ser_ram_defconfig | 1 + configs/socrates_defconfig | 1 + configs/synquacer_developerbox_defconfig | 1 + configs/total_compute_defconfig | 1 + configs/tuge1_defconfig | 1 + configs/tuxx1_defconfig | 1 + configs/vexpress_aemv8a_juno_defconfig | 1 + configs/vexpress_aemv8a_semi_defconfig | 1 + configs/vexpress_ca9x4_defconfig | 1 + configs/xilinx_zynq_virt_defconfig | 1 + configs/xtfpga_defconfig | 1 + configs/zynq_cse_nor_defconfig | 1 + drivers/mtd/Kconfig | 9 +++++++++ drivers/mtd/cfi_flash.c | 4 ++-- include/configs/P1010RDB.h | 1 - include/configs/P2041RDB.h | 2 -- include/configs/T102xRDB.h | 2 -- include/configs/T104xRDB.h | 2 -- include/configs/T208xQDS.h | 2 -- include/configs/T208xRDB.h | 2 -- include/configs/T4240RDB.h | 2 -- include/configs/blanche.h | 1 - include/configs/draak.h | 1 - include/configs/eb_cpu5282.h | 1 - include/configs/ebisu.h | 1 - include/configs/km/pg-wcom-ls102xa.h | 2 -- include/configs/ls1021aqds.h | 1 - include/configs/ls1021atwr.h | 2 -- include/configs/ls1043a_common.h | 4 ---- include/configs/ls1046aqds.h | 4 ---- include/configs/ls1088aqds.h | 2 -- include/configs/ls1088ardb.h | 2 -- include/configs/ls2080aqds.h | 2 -- include/configs/ls2080ardb.h | 2 -- include/configs/p1_p2_rdb_pc.h | 1 - include/configs/salvator-x.h | 1 - include/configs/ulcb.h | 1 - include/configs/zynq-common.h | 3 --- 132 files changed, 116 insertions(+), 51 deletions(-) diff --git a/README b/README index 3fef1d2afa0..05835207426 100644 --- a/README +++ b/README @@ -1481,11 +1481,6 @@ Configuration Settings: s29ws-n MirrorBit flash has non-standard addresses for buffered write commands. -- CONFIG_FLASH_SHOW_PROGRESS - If defined (must be an integer), print out countdown - digits and dots. Recommended value: 45 (9..1) for 80 - column displays, 15 (3..1) for 40 column displays. - - CONFIG_FLASH_VERIFY If defined, the content of the flash (destination) is compared against the source after the write operation. An error message diff --git a/configs/3c120_defconfig b/configs/3c120_defconfig index 3d62512ff9d..8c421f099be 100644 --- a/configs/3c120_defconfig +++ b/configs/3c120_defconfig @@ -39,6 +39,7 @@ CONFIG_MISC=y CONFIG_ALTERA_SYSID=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/M5208EVBE_defconfig b/configs/M5208EVBE_defconfig index 680c2d43671..20250c02a11 100644 --- a/configs/M5208EVBE_defconfig +++ b/configs/M5208EVBE_defconfig @@ -37,6 +37,7 @@ CONFIG_SYS_I2C_SPEED=80000 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=254 diff --git a/configs/M5235EVB_Flash32_defconfig b/configs/M5235EVB_Flash32_defconfig index c0087aa67f9..38c5076d5f8 100644 --- a/configs/M5235EVB_Flash32_defconfig +++ b/configs/M5235EVB_Flash32_defconfig @@ -44,6 +44,7 @@ CONFIG_SYS_I2C_SPEED=80000 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_32BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=137 diff --git a/configs/M5235EVB_defconfig b/configs/M5235EVB_defconfig index b099e986067..cb5bcb7221c 100644 --- a/configs/M5235EVB_defconfig +++ b/configs/M5235EVB_defconfig @@ -44,6 +44,7 @@ CONFIG_SYS_I2C_SPEED=80000 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=137 diff --git a/configs/M5249EVB_defconfig b/configs/M5249EVB_defconfig index b192839766e..de7f14165bd 100644 --- a/configs/M5249EVB_defconfig +++ b/configs/M5249EVB_defconfig @@ -27,6 +27,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_FLASH_CHECKSUM=y diff --git a/configs/M5272C3_defconfig b/configs/M5272C3_defconfig index a321b1c5c24..f2d70a4e269 100644 --- a/configs/M5272C3_defconfig +++ b/configs/M5272C3_defconfig @@ -56,6 +56,7 @@ CONFIG_SYS_OR7_PRELIM=0xFFC0007C CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=137 diff --git a/configs/M5275EVB_defconfig b/configs/M5275EVB_defconfig index e7e799b7bdb..01961e5ae27 100644 --- a/configs/M5275EVB_defconfig +++ b/configs/M5275EVB_defconfig @@ -41,6 +41,7 @@ CONFIG_SYS_I2C_SLAVE=0x7F CONFIG_SYS_I2C_SPEED=80000 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=11 CONFIG_MCFFEC=y diff --git a/configs/M5282EVB_defconfig b/configs/M5282EVB_defconfig index 5521cced6da..0ef2e7b4ffe 100644 --- a/configs/M5282EVB_defconfig +++ b/configs/M5282EVB_defconfig @@ -32,6 +32,7 @@ CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_FLASH_CHECKSUM=y diff --git a/configs/M53017EVB_defconfig b/configs/M53017EVB_defconfig index 32d19580880..8158cd4e84e 100644 --- a/configs/M53017EVB_defconfig +++ b/configs/M53017EVB_defconfig @@ -39,6 +39,7 @@ CONFIG_SYS_I2C_SPEED=80000 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/M5329AFEE_defconfig b/configs/M5329AFEE_defconfig index 9f0b4196392..6fede625fb8 100644 --- a/configs/M5329AFEE_defconfig +++ b/configs/M5329AFEE_defconfig @@ -39,6 +39,7 @@ CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=137 diff --git a/configs/M5329BFEE_defconfig b/configs/M5329BFEE_defconfig index 05388796fb1..fe70245497c 100644 --- a/configs/M5329BFEE_defconfig +++ b/configs/M5329BFEE_defconfig @@ -40,6 +40,7 @@ CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=137 diff --git a/configs/M5373EVB_defconfig b/configs/M5373EVB_defconfig index 90d83216489..b074cf520ff 100644 --- a/configs/M5373EVB_defconfig +++ b/configs/M5373EVB_defconfig @@ -40,6 +40,7 @@ CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=137 diff --git a/configs/MCR3000_defconfig b/configs/MCR3000_defconfig index d8d6417d21e..7d54807e645 100644 --- a/configs/MCR3000_defconfig +++ b/configs/MCR3000_defconfig @@ -83,6 +83,7 @@ CONFIG_SYS_OR7_PRELIM=0xFFFF810A CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=35 CONFIG_MTD_RAW_NAND=y diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig index 1a571cf6bce..40fc1d1da4a 100644 --- a/configs/MPC837XERDB_defconfig +++ b/configs/MPC837XERDB_defconfig @@ -197,6 +197,7 @@ CONFIG_SYS_I2C_SPEED=400000 CONFIG_FSL_ESDHC=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/MPC8548CDS_36BIT_defconfig b/configs/MPC8548CDS_36BIT_defconfig index 517fd785dd3..c6f5d87bb95 100644 --- a/configs/MPC8548CDS_36BIT_defconfig +++ b/configs/MPC8548CDS_36BIT_defconfig @@ -68,6 +68,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x57 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=128 diff --git a/configs/MPC8548CDS_defconfig b/configs/MPC8548CDS_defconfig index 5c83e808d57..b6ebac39805 100644 --- a/configs/MPC8548CDS_defconfig +++ b/configs/MPC8548CDS_defconfig @@ -67,6 +67,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x57 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=128 diff --git a/configs/MPC8548CDS_legacy_defconfig b/configs/MPC8548CDS_legacy_defconfig index b354237db3e..d272ede8d4a 100644 --- a/configs/MPC8548CDS_legacy_defconfig +++ b/configs/MPC8548CDS_legacy_defconfig @@ -67,6 +67,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x57 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=128 diff --git a/configs/ae350_rv32_defconfig b/configs/ae350_rv32_defconfig index d876602fa01..e5c8358e54d 100644 --- a/configs/ae350_rv32_defconfig +++ b/configs/ae350_rv32_defconfig @@ -34,6 +34,7 @@ CONFIG_FTSDC010_SDIO=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/ae350_rv32_spl_defconfig b/configs/ae350_rv32_spl_defconfig index 1c0b5345379..a66db656216 100644 --- a/configs/ae350_rv32_spl_defconfig +++ b/configs/ae350_rv32_spl_defconfig @@ -40,6 +40,7 @@ CONFIG_FTSDC010_SDIO=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/ae350_rv32_spl_xip_defconfig b/configs/ae350_rv32_spl_xip_defconfig index dc584a6fd45..606962c0a71 100644 --- a/configs/ae350_rv32_spl_xip_defconfig +++ b/configs/ae350_rv32_spl_xip_defconfig @@ -41,6 +41,7 @@ CONFIG_FTSDC010_SDIO=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/ae350_rv32_xip_defconfig b/configs/ae350_rv32_xip_defconfig index ec6299495d6..069a9d3982e 100644 --- a/configs/ae350_rv32_xip_defconfig +++ b/configs/ae350_rv32_xip_defconfig @@ -35,6 +35,7 @@ CONFIG_FTSDC010_SDIO=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/ae350_rv64_defconfig b/configs/ae350_rv64_defconfig index 65b3fc646f3..c373b99b956 100644 --- a/configs/ae350_rv64_defconfig +++ b/configs/ae350_rv64_defconfig @@ -34,6 +34,7 @@ CONFIG_FTSDC010_SDIO=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/ae350_rv64_spl_defconfig b/configs/ae350_rv64_spl_defconfig index 4c3e1beb005..f235db7990a 100644 --- a/configs/ae350_rv64_spl_defconfig +++ b/configs/ae350_rv64_spl_defconfig @@ -40,6 +40,7 @@ CONFIG_FTSDC010_SDIO=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/ae350_rv64_spl_xip_defconfig b/configs/ae350_rv64_spl_xip_defconfig index 3c6408a12ad..4cbfd52fb19 100644 --- a/configs/ae350_rv64_spl_xip_defconfig +++ b/configs/ae350_rv64_spl_xip_defconfig @@ -41,6 +41,7 @@ CONFIG_FTSDC010_SDIO=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/ae350_rv64_xip_defconfig b/configs/ae350_rv64_xip_defconfig index f4deee6871c..4fed2ead1db 100644 --- a/configs/ae350_rv64_xip_defconfig +++ b/configs/ae350_rv64_xip_defconfig @@ -35,6 +35,7 @@ CONFIG_FTSDC010_SDIO=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_CFI_FLASH_STATUS_POLL=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/amcore_defconfig b/configs/amcore_defconfig index b8e8bc41b6a..cebb79f733c 100644 --- a/configs/amcore_defconfig +++ b/configs/amcore_defconfig @@ -34,6 +34,7 @@ CONFIG_ENV_IS_IN_FLASH=y # CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=1024 diff --git a/configs/astro_mcf5373l_defconfig b/configs/astro_mcf5373l_defconfig index 9e5665a12b8..a1a25622c77 100644 --- a/configs/astro_mcf5373l_defconfig +++ b/configs/astro_mcf5373l_defconfig @@ -42,6 +42,7 @@ CONFIG_SYS_I2C_SLAVE=0x7F CONFIG_SYS_I2C_SPEED=80000 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/at91sam9263ek_norflash_boot_defconfig b/configs/at91sam9263ek_norflash_boot_defconfig index e7d32f09910..d5db0044815 100644 --- a/configs/at91sam9263ek_norflash_boot_defconfig +++ b/configs/at91sam9263ek_norflash_boot_defconfig @@ -50,6 +50,7 @@ CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=256 CONFIG_MTD_RAW_NAND=y diff --git a/configs/at91sam9263ek_norflash_defconfig b/configs/at91sam9263ek_norflash_defconfig index 794cf0e38d0..d82cd214721 100644 --- a/configs/at91sam9263ek_norflash_defconfig +++ b/configs/at91sam9263ek_norflash_defconfig @@ -51,6 +51,7 @@ CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=256 CONFIG_MTD_RAW_NAND=y diff --git a/configs/boston32r2_defconfig b/configs/boston32r2_defconfig index d80152be0f3..708a3a39d88 100644 --- a/configs/boston32r2_defconfig +++ b/configs/boston32r2_defconfig @@ -42,6 +42,7 @@ CONFIG_CLK=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/boston32r2el_defconfig b/configs/boston32r2el_defconfig index 8624853ebac..41769be634c 100644 --- a/configs/boston32r2el_defconfig +++ b/configs/boston32r2el_defconfig @@ -43,6 +43,7 @@ CONFIG_CLK=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/boston32r6_defconfig b/configs/boston32r6_defconfig index 464b2559202..12abbb89985 100644 --- a/configs/boston32r6_defconfig +++ b/configs/boston32r6_defconfig @@ -43,6 +43,7 @@ CONFIG_CLK=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/boston32r6el_defconfig b/configs/boston32r6el_defconfig index 67abbb9f7fa..89d14b61fbf 100644 --- a/configs/boston32r6el_defconfig +++ b/configs/boston32r6el_defconfig @@ -44,6 +44,7 @@ CONFIG_CLK=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/boston64r2_defconfig b/configs/boston64r2_defconfig index 253d2323749..80031666f9c 100644 --- a/configs/boston64r2_defconfig +++ b/configs/boston64r2_defconfig @@ -43,6 +43,7 @@ CONFIG_CLK=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/boston64r2el_defconfig b/configs/boston64r2el_defconfig index 190c993725a..ad79c4e5851 100644 --- a/configs/boston64r2el_defconfig +++ b/configs/boston64r2el_defconfig @@ -44,6 +44,7 @@ CONFIG_CLK=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/boston64r6_defconfig b/configs/boston64r6_defconfig index f6e246e07f4..581ddfa5b33 100644 --- a/configs/boston64r6_defconfig +++ b/configs/boston64r6_defconfig @@ -43,6 +43,7 @@ CONFIG_CLK=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/boston64r6el_defconfig b/configs/boston64r6el_defconfig index 82e01bb21f7..9a5655fb027 100644 --- a/configs/boston64r6el_defconfig +++ b/configs/boston64r6el_defconfig @@ -44,6 +44,7 @@ CONFIG_CLK=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/comtrend_ct5361_ram_defconfig b/configs/comtrend_ct5361_ram_defconfig index 594bddea6e1..f3f09e593fe 100644 --- a/configs/comtrend_ct5361_ram_defconfig +++ b/configs/comtrend_ct5361_ram_defconfig @@ -51,6 +51,7 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/comtrend_wap5813n_ram_defconfig b/configs/comtrend_wap5813n_ram_defconfig index 69a958d8796..a8ce3000d8a 100644 --- a/configs/comtrend_wap5813n_ram_defconfig +++ b/configs/comtrend_wap5813n_ram_defconfig @@ -51,6 +51,7 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig index 9332c8cb3ff..137f9ec4f57 100644 --- a/configs/da850evm_direct_nor_defconfig +++ b/configs/da850evm_direct_nor_defconfig @@ -65,6 +65,7 @@ CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig index 66300698a9f..cd5ddc4ad3f 100644 --- a/configs/devkit3250_defconfig +++ b/configs/devkit3250_defconfig @@ -65,6 +65,7 @@ CONFIG_SYS_I2C_LPC32XX=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=71 diff --git a/configs/gazerbeam_defconfig b/configs/gazerbeam_defconfig index d2946971b48..a852b96d4ef 100644 --- a/configs/gazerbeam_defconfig +++ b/configs/gazerbeam_defconfig @@ -192,6 +192,7 @@ CONFIG_IHS_FPGA=y CONFIG_FSL_ESDHC=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/huawei_hg556a_ram_defconfig b/configs/huawei_hg556a_ram_defconfig index 9fbec97d51d..fdff11e16fe 100644 --- a/configs/huawei_hg556a_ram_defconfig +++ b/configs/huawei_hg556a_ram_defconfig @@ -51,6 +51,7 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/integratorap_cm720t_defconfig b/configs/integratorap_cm720t_defconfig index e2709ec5218..444953db91a 100644 --- a/configs/integratorap_cm720t_defconfig +++ b/configs/integratorap_cm720t_defconfig @@ -30,6 +30,7 @@ CONFIG_SYS_RX_ETH_BUFFER=8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/integratorap_cm920t_defconfig b/configs/integratorap_cm920t_defconfig index e8baca158b8..6eb912c1a14 100644 --- a/configs/integratorap_cm920t_defconfig +++ b/configs/integratorap_cm920t_defconfig @@ -30,6 +30,7 @@ CONFIG_SYS_RX_ETH_BUFFER=8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/integratorap_cm926ejs_defconfig b/configs/integratorap_cm926ejs_defconfig index 04032c8b946..023b84200ea 100644 --- a/configs/integratorap_cm926ejs_defconfig +++ b/configs/integratorap_cm926ejs_defconfig @@ -30,6 +30,7 @@ CONFIG_SYS_RX_ETH_BUFFER=8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/integratorap_cm946es_defconfig b/configs/integratorap_cm946es_defconfig index 3d910d3d48d..fab72740681 100644 --- a/configs/integratorap_cm946es_defconfig +++ b/configs/integratorap_cm946es_defconfig @@ -30,6 +30,7 @@ CONFIG_SYS_RX_ETH_BUFFER=8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/integratorcp_cm1136_defconfig b/configs/integratorcp_cm1136_defconfig index ea1f858135e..7417b53e86f 100644 --- a/configs/integratorcp_cm1136_defconfig +++ b/configs/integratorcp_cm1136_defconfig @@ -34,6 +34,7 @@ CONFIG_BOOTFILE="uImage" # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/integratorcp_cm920t_defconfig b/configs/integratorcp_cm920t_defconfig index 19c72c759e7..36b71fc4019 100644 --- a/configs/integratorcp_cm920t_defconfig +++ b/configs/integratorcp_cm920t_defconfig @@ -34,6 +34,7 @@ CONFIG_BOOTFILE="uImage" # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/integratorcp_cm926ejs_defconfig b/configs/integratorcp_cm926ejs_defconfig index e0ba5720f3f..947d21ef35e 100644 --- a/configs/integratorcp_cm926ejs_defconfig +++ b/configs/integratorcp_cm926ejs_defconfig @@ -34,6 +34,7 @@ CONFIG_BOOTFILE="uImage" # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/integratorcp_cm946es_defconfig b/configs/integratorcp_cm946es_defconfig index e4e960e72a3..630fe0d813d 100644 --- a/configs/integratorcp_cm946es_defconfig +++ b/configs/integratorcp_cm946es_defconfig @@ -34,6 +34,7 @@ CONFIG_BOOTFILE="uImage" # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig index e7cdd84ecba..053f29b11f5 100644 --- a/configs/j7200_evm_a72_defconfig +++ b/configs/j7200_evm_a72_defconfig @@ -138,6 +138,7 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig index 87101cbf53e..dc6c1b6935d 100644 --- a/configs/j7200_evm_r5_defconfig +++ b/configs/j7200_evm_r5_defconfig @@ -112,6 +112,7 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/j7200_hs_evm_a72_defconfig b/configs/j7200_hs_evm_a72_defconfig index b9598ca1fe2..782a42b7465 100644 --- a/configs/j7200_hs_evm_a72_defconfig +++ b/configs/j7200_hs_evm_a72_defconfig @@ -139,6 +139,7 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/j7200_hs_evm_r5_defconfig b/configs/j7200_hs_evm_r5_defconfig index 608778ade86..73979f4cc32 100644 --- a/configs/j7200_hs_evm_r5_defconfig +++ b/configs/j7200_hs_evm_r5_defconfig @@ -112,6 +112,7 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig index 48a24446941..5efaff26d22 100644 --- a/configs/j721e_evm_a72_defconfig +++ b/configs/j721e_evm_a72_defconfig @@ -140,6 +140,7 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/j721e_evm_r5_defconfig b/configs/j721e_evm_r5_defconfig index d6da4c6ae2e..9d333e49056 100644 --- a/configs/j721e_evm_r5_defconfig +++ b/configs/j721e_evm_r5_defconfig @@ -120,6 +120,7 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/j721e_hs_evm_a72_defconfig b/configs/j721e_hs_evm_a72_defconfig index a1cc7da0bfb..ec66b18740e 100644 --- a/configs/j721e_hs_evm_a72_defconfig +++ b/configs/j721e_hs_evm_a72_defconfig @@ -141,6 +141,7 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/j721e_hs_evm_r5_defconfig b/configs/j721e_hs_evm_r5_defconfig index eb9df365538..e496ec85af1 100644 --- a/configs/j721e_hs_evm_r5_defconfig +++ b/configs/j721e_hs_evm_r5_defconfig @@ -120,6 +120,7 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/j721s2_evm_a72_defconfig b/configs/j721s2_evm_a72_defconfig index 2b2f80c4aaa..99a0eee12d9 100644 --- a/configs/j721s2_evm_a72_defconfig +++ b/configs/j721s2_evm_a72_defconfig @@ -139,6 +139,7 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/j721s2_evm_r5_defconfig b/configs/j721s2_evm_r5_defconfig index 2de5d87bdb2..cd250169980 100644 --- a/configs/j721s2_evm_r5_defconfig +++ b/configs/j721s2_evm_r5_defconfig @@ -118,6 +118,7 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/j721s2_hs_evm_a72_defconfig b/configs/j721s2_hs_evm_a72_defconfig index 3e0ec40fb2e..9fc90737da8 100644 --- a/configs/j721s2_hs_evm_a72_defconfig +++ b/configs/j721s2_hs_evm_a72_defconfig @@ -140,6 +140,7 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/j721s2_hs_evm_r5_defconfig b/configs/j721s2_hs_evm_r5_defconfig index bc8672f7096..d9988fc17fc 100644 --- a/configs/j721s2_hs_evm_r5_defconfig +++ b/configs/j721s2_hs_evm_r5_defconfig @@ -118,6 +118,7 @@ CONFIG_MMC_SDHCI_AM654=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/kmcent2_defconfig b/configs/kmcent2_defconfig index 2abda788939..bd4943006c1 100644 --- a/configs/kmcent2_defconfig +++ b/configs/kmcent2_defconfig @@ -74,6 +74,7 @@ CONFIG_FSL_ESDHC=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_EMPTY_INFO=y diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig index 9609f58fb4d..4ea7da8d32c 100644 --- a/configs/kmcoge5ne_defconfig +++ b/configs/kmcoge5ne_defconfig @@ -227,6 +227,7 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig index bd3d6315b1f..96298ed0c38 100644 --- a/configs/kmeter1_defconfig +++ b/configs/kmeter1_defconfig @@ -193,6 +193,7 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/kmopti2_defconfig b/configs/kmopti2_defconfig index de6d99e91ec..db717e4a15d 100644 --- a/configs/kmopti2_defconfig +++ b/configs/kmopti2_defconfig @@ -208,6 +208,7 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/kmsupx5_defconfig b/configs/kmsupx5_defconfig index a231510a76f..69de685bafd 100644 --- a/configs/kmsupx5_defconfig +++ b/configs/kmsupx5_defconfig @@ -185,6 +185,7 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/kmtepr2_defconfig b/configs/kmtepr2_defconfig index e6beb62f862..92f2b0adecd 100644 --- a/configs/kmtepr2_defconfig +++ b/configs/kmtepr2_defconfig @@ -207,6 +207,7 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/malta64_defconfig b/configs/malta64_defconfig index b635c651aae..03de1616840 100644 --- a/configs/malta64_defconfig +++ b/configs/malta64_defconfig @@ -37,6 +37,7 @@ CONFIG_SYS_ATA_REG_OFFSET=0 CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=128 diff --git a/configs/malta64el_defconfig b/configs/malta64el_defconfig index 243213cb819..3ea9fa9857e 100644 --- a/configs/malta64el_defconfig +++ b/configs/malta64el_defconfig @@ -39,6 +39,7 @@ CONFIG_SYS_ATA_REG_OFFSET=0 CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=128 diff --git a/configs/malta_defconfig b/configs/malta_defconfig index ed41e298f44..317b422a6b6 100644 --- a/configs/malta_defconfig +++ b/configs/malta_defconfig @@ -36,6 +36,7 @@ CONFIG_SYS_ATA_REG_OFFSET=0 CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=128 diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig index 63e5fcb6a5c..3e4d2beda2f 100644 --- a/configs/maltael_defconfig +++ b/configs/maltael_defconfig @@ -38,6 +38,7 @@ CONFIG_SYS_ATA_REG_OFFSET=0 CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=128 diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig index 2566bdef168..5f8a2873733 100644 --- a/configs/mccmon6_nor_defconfig +++ b/configs/mccmon6_nor_defconfig @@ -63,6 +63,7 @@ CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig index 43ffc3c6bc1..651eef5d06f 100644 --- a/configs/mccmon6_sd_defconfig +++ b/configs/mccmon6_sd_defconfig @@ -61,6 +61,7 @@ CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_FLASH_CFI_MTD=y diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig index f1b9cb461b9..186521aac6c 100644 --- a/configs/microblaze-generic_defconfig +++ b/configs/microblaze-generic_defconfig @@ -64,6 +64,7 @@ CONFIG_LED_GPIO=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_EMPTY_INFO=y diff --git a/configs/octeon_ebb7304_defconfig b/configs/octeon_ebb7304_defconfig index b966b1d24f0..a642a64d5c1 100644 --- a/configs/octeon_ebb7304_defconfig +++ b/configs/octeon_ebb7304_defconfig @@ -50,6 +50,7 @@ CONFIG_MMC_OCTEONTX=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_EMPTY_INFO=y diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig index 471e0556fa8..fb9430b4541 100644 --- a/configs/omap35_logic_somlv_defconfig +++ b/configs/omap35_logic_somlv_defconfig @@ -74,6 +74,7 @@ CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig index e18cbaa5c18..37708516f1d 100644 --- a/configs/omap3_logic_somlv_defconfig +++ b/configs/omap3_logic_somlv_defconfig @@ -75,6 +75,7 @@ CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/pm9261_defconfig b/configs/pm9261_defconfig index d43043427a9..d30d07bcbf1 100644 --- a/configs/pm9261_defconfig +++ b/configs/pm9261_defconfig @@ -45,6 +45,7 @@ CONFIG_AT91_GPIO=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=256 CONFIG_MTD_RAW_NAND=y diff --git a/configs/pm9263_defconfig b/configs/pm9263_defconfig index 2e42ba08032..11ec775b38b 100644 --- a/configs/pm9263_defconfig +++ b/configs/pm9263_defconfig @@ -49,6 +49,7 @@ CONFIG_AT91_GPIO=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=256 CONFIG_MTD_RAW_NAND=y diff --git a/configs/qemu-riscv32_defconfig b/configs/qemu-riscv32_defconfig index 40ba25297f6..425bb37c988 100644 --- a/configs/qemu-riscv32_defconfig +++ b/configs/qemu-riscv32_defconfig @@ -20,4 +20,5 @@ CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_MAX_FLASH_BANKS=2 diff --git a/configs/qemu-riscv32_smode_defconfig b/configs/qemu-riscv32_smode_defconfig index eb9bf9b918a..eeb90360cdb 100644 --- a/configs/qemu-riscv32_smode_defconfig +++ b/configs/qemu-riscv32_smode_defconfig @@ -21,4 +21,5 @@ CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_MAX_FLASH_BANKS=2 diff --git a/configs/qemu-riscv32_spl_defconfig b/configs/qemu-riscv32_spl_defconfig index 756e7f35f68..04447e5ed3c 100644 --- a/configs/qemu-riscv32_spl_defconfig +++ b/configs/qemu-riscv32_spl_defconfig @@ -25,5 +25,6 @@ CONFIG_SYS_BOOTM_LEN=0x4000000 # CONFIG_CMD_MII is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_MAX_FLASH_BANKS=2 # CONFIG_BINMAN_FDT is not set diff --git a/configs/qemu-riscv64_defconfig b/configs/qemu-riscv64_defconfig index d5eae95c80f..7430fa075d7 100644 --- a/configs/qemu-riscv64_defconfig +++ b/configs/qemu-riscv64_defconfig @@ -20,4 +20,5 @@ CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_MAX_FLASH_BANKS=2 diff --git a/configs/qemu-riscv64_smode_defconfig b/configs/qemu-riscv64_smode_defconfig index 1cb06b4b2cd..03ef58ba475 100644 --- a/configs/qemu-riscv64_smode_defconfig +++ b/configs/qemu-riscv64_smode_defconfig @@ -23,4 +23,5 @@ CONFIG_CMD_NVEDIT_EFI=y # CONFIG_CMD_MII is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_MAX_FLASH_BANKS=2 diff --git a/configs/qemu-riscv64_spl_defconfig b/configs/qemu-riscv64_spl_defconfig index 68b16f0a2c8..840e0ff151c 100644 --- a/configs/qemu-riscv64_spl_defconfig +++ b/configs/qemu-riscv64_spl_defconfig @@ -24,5 +24,6 @@ CONFIG_SYS_BOOTM_LEN=0x4000000 # CONFIG_CMD_MII is not set CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM_MTD=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_MAX_FLASH_BANKS=2 # CONFIG_BINMAN_FDT is not set diff --git a/configs/qemu_arm64_defconfig b/configs/qemu_arm64_defconfig index 4123338b8dd..93352331526 100644 --- a/configs/qemu_arm64_defconfig +++ b/configs/qemu_arm64_defconfig @@ -45,6 +45,7 @@ CONFIG_DFU_RAM=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/qemu_arm_defconfig b/configs/qemu_arm_defconfig index f6c6c28764e..6373185f297 100644 --- a/configs/qemu_arm_defconfig +++ b/configs/qemu_arm_defconfig @@ -47,6 +47,7 @@ CONFIG_DFU_RAM=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/r2dplus_defconfig b/configs/r2dplus_defconfig index 4217175345d..0653089ecae 100644 --- a/configs/r2dplus_defconfig +++ b/configs/r2dplus_defconfig @@ -44,6 +44,7 @@ CONFIG_IDE_RESET=y CONFIG_CLK=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=256 CONFIG_E1000=y diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig index b3108fa64af..ba2e7dd76d4 100644 --- a/configs/sama5d3xek_mmc_defconfig +++ b/configs/sama5d3xek_mmc_defconfig @@ -81,6 +81,7 @@ CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=131 diff --git a/configs/sama5d3xek_nandflash_defconfig b/configs/sama5d3xek_nandflash_defconfig index f06c21fdf11..3afb2aaffba 100644 --- a/configs/sama5d3xek_nandflash_defconfig +++ b/configs/sama5d3xek_nandflash_defconfig @@ -80,6 +80,7 @@ CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=131 diff --git a/configs/sama5d3xek_spiflash_defconfig b/configs/sama5d3xek_spiflash_defconfig index 2045146fb8d..8d71ba7d4f4 100644 --- a/configs/sama5d3xek_spiflash_defconfig +++ b/configs/sama5d3xek_spiflash_defconfig @@ -82,6 +82,7 @@ CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=131 diff --git a/configs/sfr_nb4-ser_ram_defconfig b/configs/sfr_nb4-ser_ram_defconfig index 5cf020a3ebb..61404246707 100644 --- a/configs/sfr_nb4-ser_ram_defconfig +++ b/configs/sfr_nb4-ser_ram_defconfig @@ -53,6 +53,7 @@ CONFIG_LED_BCM6358=y CONFIG_LED_GPIO=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/socrates_defconfig b/configs/socrates_defconfig index f45f570764c..4cc50d35589 100644 --- a/configs/socrates_defconfig +++ b/configs/socrates_defconfig @@ -77,6 +77,7 @@ CONFIG_SYS_I2C_FSL=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_FLASH_QUIET_TEST=y CONFIG_SYS_MAX_FLASH_SECT=256 diff --git a/configs/synquacer_developerbox_defconfig b/configs/synquacer_developerbox_defconfig index f69b873a36a..a6fc65baeec 100644 --- a/configs/synquacer_developerbox_defconfig +++ b/configs/synquacer_developerbox_defconfig @@ -60,6 +60,7 @@ CONFIG_MMC_SDHCI_F_SDH30=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/total_compute_defconfig b/configs/total_compute_defconfig index 807e9ebd862..04d27058f38 100644 --- a/configs/total_compute_defconfig +++ b/configs/total_compute_defconfig @@ -53,6 +53,7 @@ CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_32BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/tuge1_defconfig b/configs/tuge1_defconfig index 83120759b15..0c3381461eb 100644 --- a/configs/tuge1_defconfig +++ b/configs/tuge1_defconfig @@ -185,6 +185,7 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/tuxx1_defconfig b/configs/tuxx1_defconfig index ee1640608d2..4f192ad2624 100644 --- a/configs/tuxx1_defconfig +++ b/configs/tuxx1_defconfig @@ -209,6 +209,7 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig index 73b7363b68d..47841e8b6ca 100644 --- a/configs/vexpress_aemv8a_juno_defconfig +++ b/configs/vexpress_aemv8a_juno_defconfig @@ -29,6 +29,7 @@ CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_SYS_FLASH_CFI_WIDTH_32BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/vexpress_aemv8a_semi_defconfig b/configs/vexpress_aemv8a_semi_defconfig index 0b566b8005c..4b22d49b29a 100644 --- a/configs/vexpress_aemv8a_semi_defconfig +++ b/configs/vexpress_aemv8a_semi_defconfig @@ -26,6 +26,7 @@ CONFIG_CMD_UBI=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_SYS_FLASH_CFI_WIDTH_32BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/configs/vexpress_ca9x4_defconfig b/configs/vexpress_ca9x4_defconfig index 70ce13ecccf..83e15ddbe17 100644 --- a/configs/vexpress_ca9x4_defconfig +++ b/configs/vexpress_ca9x4_defconfig @@ -43,6 +43,7 @@ CONFIG_SYS_MMC_MAX_BLK_COUNT=127 CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_EMPTY_INFO=y diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig index a4c555dac5c..50685657690 100644 --- a/configs/xilinx_zynq_virt_defconfig +++ b/configs/xilinx_zynq_virt_defconfig @@ -109,6 +109,7 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=10 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/xtfpga_defconfig b/configs/xtfpga_defconfig index c58514669dd..f5eeea426bb 100644 --- a/configs/xtfpga_defconfig +++ b/configs/xtfpga_defconfig @@ -39,6 +39,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y +CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y diff --git a/configs/zynq_cse_nor_defconfig b/configs/zynq_cse_nor_defconfig index f1c648a8f9a..c194e89b7ec 100644 --- a/configs/zynq_cse_nor_defconfig +++ b/configs/zynq_cse_nor_defconfig @@ -75,6 +75,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_SHOW_PROGRESS=10 CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index d8e2dec0a8d..04ae45665e4 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -77,6 +77,15 @@ config SYS_FLASH_CFI_WIDTH help This must be kept in sync with the table in include/flash.h +config FLASH_SHOW_PROGRESS + int "Print out a countdown durinng writes" + depends on FLASH_CFI_DRIVER + default 45 + help + If set to a non-zero value, print out countdown digits and dots. + Recommended value: 45 (9..1) for 80 column displays, 15 (3..1) for 40 + column displays. + config CFI_FLASH bool "Enable Driver Model for CFI Flash driver" depends on DM_MTD diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index c1cdd2cbc3e..f378f6fb613 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1292,7 +1292,7 @@ void flash_print_info(flash_info_t *info) * effect updates to digit and dots. Repeated code is nasty too, so * we define it once here. */ -#ifdef CONFIG_FLASH_SHOW_PROGRESS +#if CONFIG_FLASH_SHOW_PROGRESS #define FLASH_SHOW_PROGRESS(scale, dots, digit, dots_sub) \ if (flash_verbose) { \ dots -= dots_sub; \ @@ -1325,7 +1325,7 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE int buffered_size; #endif -#ifdef CONFIG_FLASH_SHOW_PROGRESS +#if CONFIG_FLASH_SHOW_PROGRESS int digit = CONFIG_FLASH_SHOW_PROGRESS; int scale = 0; int dots = 0; diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 4418d516956..f79c62adba3 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -161,7 +161,6 @@ extern unsigned long get_sdram_size(void); #define CFG_SYS_NOR_FTIM3 0x0 #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ /* CFI for NOR Flash */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 8b901ca47a0..707157e4a9a 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -101,8 +101,6 @@ #define PIXIS_LBMAP_SHIFT 4 #define PIXIS_LBMAP_ALTBANK 0x40 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - /* Nand Flash */ #ifdef CONFIG_NAND_FSL_ELBC #define CFG_SYS_NAND_BASE 0xffa00000 diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 623d4cf5562..b590f127392 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -158,8 +158,6 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0x0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} #ifdef CONFIG_TARGET_T1024RDB diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index b6938056bbe..9d805f446b4 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -126,8 +126,6 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0x0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} /* CPLD on IFC */ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index a93e05dd4d2..804b7ec4c1c 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -119,8 +119,6 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0x0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS \ + 0x8000000, CFG_SYS_FLASH_BASE_PHYS} diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index cf65a0da188..d8213b4662f 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -114,8 +114,6 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0x0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS } /* CPLD on IFC */ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index b51762264ad..958933689d3 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -184,8 +184,6 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0x0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS \ + 0x8000000, CFG_SYS_FLASH_BASE_PHYS} diff --git a/include/configs/blanche.h b/include/configs/blanche.h index cb28ae28dd3..fe09997e178 100644 --- a/include/configs/blanche.h +++ b/include/configs/blanche.h @@ -25,7 +25,6 @@ #if !defined(CONFIG_MTD_NOR_FLASH) #define CONFIG_SH_QSPI_BASE 0xE6B10000 #else -#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CFG_SYS_FLASH_BASE 0x00000000 #define CFG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */ #define CFG_SYS_FLASH_BANKS_LIST { (CFG_SYS_FLASH_BASE) } diff --git a/include/configs/draak.h b/include/configs/draak.h index 8140bc469c5..946f1d96469 100644 --- a/include/configs/draak.h +++ b/include/configs/draak.h @@ -13,7 +13,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CFG_SYS_FLASH_BANKS_LIST { 0x08000000 } #define CFG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 21eab9b3a47..717f49ca29d 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -84,7 +84,6 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE #define CFG_SYS_INT_FLASH_BASE 0xF0000000 diff --git a/include/configs/ebisu.h b/include/configs/ebisu.h index d1882a9646b..ad5944230a6 100644 --- a/include/configs/ebisu.h +++ b/include/configs/ebisu.h @@ -15,7 +15,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CFG_SYS_FLASH_BANKS_LIST { 0x08000000 } #define CFG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index 7fe2ece8403..8d5b24d827d 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -58,8 +58,6 @@ FTIM2_NOR_TWP(0xb)) #define CFG_SYS_NOR_FTIM3 0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE_PHYS } #define CFG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index d6681e85987..e49588489c1 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -60,7 +60,6 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CFG_SYS_WRITE_SWAPPED_DATA #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS, \ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 3c4c207edd0..b07978a999e 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -92,8 +92,6 @@ FTIM2_NOR_TWPH(0x0e)) #define CFG_SYS_NOR_FTIM3 0 -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE_PHYS } #define CFG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index a3fa92d1ff4..e54e903a8a9 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -90,10 +90,6 @@ #define CFG_SYS_FLASH_BASE 0x60000000 #define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #define CFG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 - -#ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#endif #endif #endif diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 553ae841cab..e9b8ad0c0b7 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -41,10 +41,6 @@ #define CFG_SYS_FLASH_BASE 0x60000000 #define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #define CFG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 - -#ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#endif #endif /* LPUART */ diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index a35045d640f..dc9cded49fd 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -62,8 +62,6 @@ #define CFG_SYS_IFC_CCR 0x01000000 #ifndef SYS_NO_FLASH -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE,\ CFG_SYS_FLASH_BASE + 0x40000000} #endif diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 7bc4fc6a665..e2444cd8eb4 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -47,8 +47,6 @@ #define CFG_SYS_IFC_CCR 0x01000000 #ifndef SYS_NO_FLASH -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE } #endif #endif diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 924d4057d93..4e6d40afbf1 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -64,8 +64,6 @@ #define CFG_SYS_IFC_CCR 0x01000000 #ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE,\ CFG_SYS_FLASH_BASE + 0x40000000} #endif diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index c50b6030680..8f36958f710 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -61,8 +61,6 @@ #define CFG_SYS_IFC_CCR 0x01000000 #ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - #define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE,\ CFG_SYS_FLASH_BASE + 0x40000000} #endif diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index f86b96b2141..eb2c5a2d837 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -199,7 +199,6 @@ #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ /* Nand Flash */ #ifdef CONFIG_NAND_FSL_ELBC diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h index 2e422cd241e..8dc6702de48 100644 --- a/include/configs/salvator-x.h +++ b/include/configs/salvator-x.h @@ -13,7 +13,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CFG_SYS_FLASH_BANKS_LIST { 0x08000000 } #define CFG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h index ab199bc726a..6e03375c6c3 100644 --- a/include/configs/ulcb.h +++ b/include/configs/ulcb.h @@ -13,7 +13,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 #define CFG_SYS_FLASH_BANKS_LIST { 0x08000000 } #define CFG_SYS_WRITE_SWAPPED_DATA diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index b8c142fed37..37b54289073 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -35,9 +35,6 @@ /* Ethernet driver */ /* NOR */ -#ifdef CONFIG_MTD_NOR_FLASH -# define CONFIG_FLASH_SHOW_PROGRESS 10 -#endif #ifdef CONFIG_USB_EHCI_ZYNQ # define DFU_DEFAULT_POLL_TIMEOUT 300 From 3a581af21af0bceb7e47650a19e3ddd3de87148a Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:21 -0500 Subject: [PATCH 11/41] Convert CONFIG_FLASH_SPANSION_S29WS_N et al to Kconfig This converts the following to Kconfig: CONFIG_FLASH_SPANSION_S29WS_N CONFIG_FLASH_VERIFY CONFIG_FSL_FM_10GEC_REGULAR_NOTATION CONFIG_FSL_ISBC_KEY_EXT CONFIG_FSL_TRUST_ARCH_v1 CONFIG_FSL_SDHC_V2_3 CONFIG_MAX_DSP_CPUS CONFIG_MIU_2BIT_INTERLEAVED CONFIG_SERIAL_BOOT CONFIG_SPI_BOOTING CONFIG_X86EMU_RAW_IO Signed-off-by: Tom Rini --- README | 13 ------------- arch/Kconfig.nxp | 17 +++++++++++++++++ arch/arm/include/asm/fsl_secure_boot.h | 15 --------------- arch/arm/mach-exynos/Kconfig | 4 ++++ arch/powerpc/cpu/mpc85xx/Kconfig | 5 +++++ arch/powerpc/include/asm/config_mpc85xx.h | 7 ------- arch/powerpc/include/asm/fsl_secure_boot.h | 18 ------------------ board/freescale/common/fsl_validate.c | 18 +++++++++--------- board/google/Kconfig | 4 ++++ board/samsung/smdkv310/Kconfig | 3 +++ board/sysam/stmark2/Kconfig | 4 ++++ configs/M53017EVB_defconfig | 1 + configs/mccmon6_nor_defconfig | 1 + configs/mccmon6_sd_defconfig | 1 + doc/README.fsl-dpaa | 10 ---------- drivers/mmc/Kconfig | 5 +++++ drivers/mtd/Kconfig | 19 +++++++++++++++++++ drivers/net/Kconfig | 13 +++++++++++++ include/configs/M53017EVB.h | 1 - include/configs/conga-qeval20-qa3-e3845.h | 1 - include/configs/dfi-bt700.h | 1 - include/configs/exynos5-dt-common.h | 1 - include/configs/mccmon6.h | 1 - include/configs/minnowmax.h | 1 - include/configs/smdkv310.h | 3 --- include/configs/som-db5800-som-6867.h | 1 - include/configs/stmark2.h | 4 ---- include/configs/theadorable-x86-common.h | 1 - include/configs/x86-chromebook.h | 1 - 29 files changed, 86 insertions(+), 88 deletions(-) delete mode 100644 doc/README.fsl-dpaa diff --git a/README b/README index 05835207426..b833aca2e58 100644 --- a/README +++ b/README @@ -1477,19 +1477,6 @@ Configuration Settings: - CONFIG_SYS_FLASH_USE_BUFFER_WRITE Use buffered writes to flash. -- CONFIG_FLASH_SPANSION_S29WS_N - s29ws-n MirrorBit flash has non-standard addresses for buffered - write commands. - -- CONFIG_FLASH_VERIFY - If defined, the content of the flash (destination) is compared - against the source after the write operation. An error message - will be printed when the contents are not identical. - Please note that this option is useless in nearly all cases, - since such flash programming errors usually are detected earlier - while unprotecting/erasing/programming. Please only enable - this option if you really know what you are doing. - - CONFIG_ENV_FLAGS_LIST_DEFAULT - CONFIG_ENV_FLAGS_LIST_STATIC Enable validation of the values given to environment variables when diff --git a/arch/Kconfig.nxp b/arch/Kconfig.nxp index 805fe934a1f..ad61dabb31b 100644 --- a/arch/Kconfig.nxp +++ b/arch/Kconfig.nxp @@ -1,5 +1,10 @@ +config FSL_TRUST_ARCH_v1 + bool + config NXP_ESBC bool "NXP ESBC (secure boot) functionality" + select FSL_TRUST_ARCH_v1 if ARCH_P3041 || ARCH_P4080 || \ + ARCH_P5040 || ARCH_P2041 help Enable Freescale Secure Boot feature. Normally selected by defconfig. If unsure, do not change. @@ -10,6 +15,7 @@ menu "Chain of trust / secure boot options" config CHAIN_OF_TRUST select FSL_CAAM select ARCH_MISC_INIT + select FSL_ISBC_KEY_EXT if (ARM || FSL_CORENET) && !SYS_RAMBOOT select FSL_SEC_MON select SPL_BOARD_INIT if (ARM && SPL) select SPL_HASH if (ARM && SPL) @@ -41,6 +47,17 @@ config ESBC_ADDR_64BIT help For Layerscape based platforms, ESBC image Address in Header is 64bit. +config FSL_ISBC_KEY_EXT + bool + help + The key used for verification of next level images is picked up from + an Extension Table which has been verified by the ISBC (Internal + Secure boot Code) in boot ROM of the SoC. The feature is only + applicable in case of NOR boot and is not applicable in case of + RAMBOOT (NAND, SD, SPI). For Layerscape, this feature is available + for all device if IE Table is copied to XIP memory Also, for + Layerscape, ISBC doesn't verify this table. + config SYS_FSL_SFP_BE def_bool y depends on PPC || FSL_LSCH2 || ARCH_LS1021A diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index a4f4961fc87..6a9d198cb81 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -9,21 +9,6 @@ #ifdef CONFIG_CHAIN_OF_TRUST #ifndef CONFIG_SPL_BUILD -#ifndef CONFIG_SYS_RAMBOOT -/* The key used for verification of next level images - * is picked up from an Extension Table which has - * been verified by the ISBC (Internal Secure boot Code) - * in boot ROM of the SoC. - * The feature is only applicable in case of NOR boot and is - * not applicable in case of RAMBOOT (NAND, SD, SPI). - * For LS, this feature is available for all device if IE Table - * is copied to XIP memory - * Also, for LS, ISBC doesn't verify this table. - */ -#define CONFIG_FSL_ISBC_KEY_EXT - -#endif - #ifdef CONFIG_FSL_LS_PPA /* Define the key hash here if SRK used for signing PPA image is * different from SRK hash put in SFP used for U-Boot. diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 383af83066e..8f3aee052c8 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -4,6 +4,9 @@ config BOARD_COMMON def_bool y depends on !TARGET_SMDKV310 && !TARGET_ARNDALE +config SPI_BOOTING + bool + config USB_BOOTING bool @@ -27,6 +30,7 @@ config ARCH_EXYNOS5 select BOARD_EARLY_INIT_F select CPU_V7A select SHA_HW_ACCEL + select SPI_BOOTING if EXYNOS5_DT select USB_BOOTING imply CMD_HASH imply CRC32_VERIFY diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index f2361560e9a..721dafc5ab1 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -1324,6 +1324,11 @@ config SYS_ULB_CLK config SYS_ETVPE_CLK int default 1 + +config MAX_DSP_CPUS + int + default 12 if ARCH_B4860 + default 2 if ARCH_B4420 endif config SYS_L2_SIZE_256KB diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 1b5b4947f1a..edaf8baaaeb 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -23,7 +23,6 @@ #define CFG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 #elif defined(CONFIG_ARCH_P1010) -#define CONFIG_FSL_SDHC_V2_3 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 #elif defined(CONFIG_ARCH_P1021) @@ -93,11 +92,9 @@ #define CFG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #elif defined(CONFIG_ARCH_BSC9131) -#define CONFIG_FSL_SDHC_V2_3 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 3 #elif defined(CONFIG_ARCH_BSC9132) -#define CONFIG_FSL_SDHC_V2_3 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 3 #elif defined(CONFIG_ARCH_T4240) @@ -136,7 +133,6 @@ #define CFG_SYS_FM_MURAM_SIZE 0x60000 #ifdef CONFIG_ARCH_B4860 -#define CONFIG_MAX_DSP_CPUS 12 #define CONFIG_NUM_DSP_CPUS 6 #define CFG_SYS_FSL_CLUSTER_CLOCKS { 1, 4, 4, 4 } #define CFG_SYS_NUM_FM1_DTSEC 6 @@ -145,7 +141,6 @@ #define CFG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CFG_SYS_FSL_SRIO_IB_WIN_NUM 5 #else -#define CONFIG_MAX_DSP_CPUS 2 #define CFG_SYS_FSL_CLUSTER_CLOCKS { 1, 4 } #define CFG_SYS_NUM_FM1_DTSEC 4 #define CFG_SYS_NUM_FM1_10GEC 0 @@ -173,7 +168,6 @@ #define CFG_SYS_NUM_FMAN 1 #define CFG_SYS_NUM_FM1_DTSEC 4 #define CFG_SYS_NUM_FM1_10GEC 1 -#define CONFIG_FSL_FM_10GEC_REGULAR_NOTATION #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 #define CFG_SYS_FM1_CLK 0 #define CONFIG_QBMAN_CLK_DIV 1 @@ -204,7 +198,6 @@ #elif defined(CONFIG_ARCH_C29X) -#define CONFIG_FSL_SDHC_V2_3 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 #define CFG_SYS_FSL_SEC_IDX_OFFSET 0x20000 diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index e8b26802062..09f37ec3e49 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -35,24 +35,6 @@ #define CFG_SYS_INIT_L3_ADDR 0xbff00000 #endif #endif - -#if defined(CONFIG_ARCH_P3041) || \ - defined(CONFIG_ARCH_P4080) || \ - defined(CONFIG_ARCH_P5040) || \ - defined(CONFIG_ARCH_P2041) - #define CONFIG_FSL_TRUST_ARCH_v1 -#endif - -#if defined(CONFIG_FSL_CORENET) && !defined(CONFIG_SYS_RAMBOOT) -/* The key used for verification of next level images - * is picked up from an Extension Table which has - * been verified by the ISBC (Internal Secure boot Code) - * in boot ROM of the SoC. - * The feature is only applicable in case of NOR boot and is - * not applicable in case of RAMBOOT (NAND, SD, SPI). - */ -#define CONFIG_FSL_ISBC_KEY_EXT -#endif #endif /* #ifdef CONFIG_NXP_ESBC */ #ifdef CONFIG_CHAIN_OF_TRUST diff --git a/board/freescale/common/fsl_validate.c b/board/freescale/common/fsl_validate.c index 285ed9afcc9..bfe6357b0d6 100644 --- a/board/freescale/common/fsl_validate.c +++ b/board/freescale/common/fsl_validate.c @@ -29,7 +29,7 @@ #define CHECK_KEY_LEN(key_len) (((key_len) == 2 * KEY_SIZE_BYTES / 4) || \ ((key_len) == 2 * KEY_SIZE_BYTES / 2) || \ ((key_len) == 2 * KEY_SIZE_BYTES)) -#if defined(CONFIG_FSL_ISBC_KEY_EXT) +#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT) /* Global data structure */ static struct fsl_secboot_glb glb; #endif @@ -63,7 +63,7 @@ self: goto self; } -#if defined(CONFIG_FSL_ISBC_KEY_EXT) +#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT) static u32 check_ie(struct fsl_secboot_img_priv *img) { if (img->hdr.ie_flag & IE_FLAG_MASK) @@ -188,7 +188,7 @@ static u32 check_srk(struct fsl_secboot_img_priv *img) { #ifdef CONFIG_ESBC_HDR_LS /* In LS, No SRK Flag as SRK is always present if IE not present*/ -#if defined(CONFIG_FSL_ISBC_KEY_EXT) +#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT) return !check_ie(img); #endif return 1; @@ -278,7 +278,7 @@ static u32 read_validate_single_key(struct fsl_secboot_img_priv *img) } #endif /* CONFIG_ESBC_HDR_LS */ -#if defined(CONFIG_FSL_ISBC_KEY_EXT) +#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT) static void install_ie_tbl(uintptr_t ie_tbl_addr, struct fsl_secboot_img_priv *img) @@ -434,7 +434,7 @@ void fsl_secboot_handle_error(int error) case ERROR_ESBC_CLIENT_HEADER_INVALID_KEY_NUM: case ERROR_ESBC_CLIENT_HEADER_INV_SRK_ENTRY_KEYLEN: #endif -#if defined(CONFIG_FSL_ISBC_KEY_EXT) +#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT) /*@fallthrough@*/ case ERROR_ESBC_CLIENT_HEADER_IE_KEY_REVOKED: case ERROR_ESBC_CLIENT_HEADER_INVALID_IE_NUM_ENTRY: @@ -571,7 +571,7 @@ static int calc_esbchdr_esbc_hash(struct fsl_secboot_img_priv *img) key_hash = 1; } #endif -#if defined(CONFIG_FSL_ISBC_KEY_EXT) +#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT) if (!key_hash && check_ie(img)) key_hash = 1; #endif @@ -705,7 +705,7 @@ static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img) } #endif -#if defined(CONFIG_FSL_ISBC_KEY_EXT) +#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT) if (!key_found && check_ie(img)) { ret = read_validate_ie_tbl(img); if (ret != 0) @@ -851,7 +851,7 @@ static int secboot_init(struct fsl_secboot_img_priv **img_ptr) return -ENOMEM; memset(img, 0, sizeof(struct fsl_secboot_img_priv)); -#if defined(CONFIG_FSL_ISBC_KEY_EXT) +#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT) if (glb.ie_addr) img->ie_addr = glb.ie_addr; #endif @@ -952,7 +952,7 @@ int fsl_secboot_validate(uintptr_t haddr, char *arg_hash_str, else ret = memcmp(srk_hash, img->img_key_hash, SHA256_BYTES); -#if defined(CONFIG_FSL_ISBC_KEY_EXT) +#if CONFIG_IS_ENABLED(FSL_ISBC_KEY_EXT) if (!hash_cmd && check_ie(img)) ret = 0; #endif diff --git a/board/google/Kconfig b/board/google/Kconfig index c57e518c33f..0474b4e6938 100644 --- a/board/google/Kconfig +++ b/board/google/Kconfig @@ -6,6 +6,10 @@ if VENDOR_GOOGLE config BIOSEMU bool + select X86EMU_RAW_IO + +config X86EMU_RAW_IO + bool choice prompt "Mainboard model" diff --git a/board/samsung/smdkv310/Kconfig b/board/samsung/smdkv310/Kconfig index a6fd657697e..cf5ac170743 100644 --- a/board/samsung/smdkv310/Kconfig +++ b/board/samsung/smdkv310/Kconfig @@ -1,5 +1,8 @@ if TARGET_SMDKV310 +config MIU_2BIT_INTERLEAVED + def_bool y + config SYS_BOARD default "smdkv310" diff --git a/board/sysam/stmark2/Kconfig b/board/sysam/stmark2/Kconfig index 49d02744a9a..b2595059c68 100644 --- a/board/sysam/stmark2/Kconfig +++ b/board/sysam/stmark2/Kconfig @@ -6,6 +6,10 @@ config CF_SBF config EXTRA_CLOCK def_bool y +config SERIAL_BOOT + def_bool y + depends on CF_SBF + config SYS_INPUT_CLKSRC hex default 30000000 diff --git a/configs/M53017EVB_defconfig b/configs/M53017EVB_defconfig index 8158cd4e84e..b6783ab95ba 100644 --- a/configs/M53017EVB_defconfig +++ b/configs/M53017EVB_defconfig @@ -41,6 +41,7 @@ CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y CONFIG_FLASH_SHOW_PROGRESS=0 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_FLASH_SPANSION_S29WS_N=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_SECT=137 diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig index 5f8a2873733..1e6cec01213 100644 --- a/configs/mccmon6_nor_defconfig +++ b/configs/mccmon6_nor_defconfig @@ -69,6 +69,7 @@ CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y +CONFIG_FLASH_VERIFY=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=25000000 CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig index 651eef5d06f..20b6e03bdfd 100644 --- a/configs/mccmon6_sd_defconfig +++ b/configs/mccmon6_sd_defconfig @@ -67,6 +67,7 @@ CONFIG_SYS_FLASH_EMPTY_INFO=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y +CONFIG_FLASH_VERIFY=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=25000000 CONFIG_SPI_FLASH_SPANSION=y diff --git a/doc/README.fsl-dpaa b/doc/README.fsl-dpaa deleted file mode 100644 index 3ef5eeb32e1..00000000000 --- a/doc/README.fsl-dpaa +++ /dev/null @@ -1,10 +0,0 @@ -This file documents Freescale DPAA-specific options. - -FMan (Frame Manager) - - CONFIG_FSL_FM_10GEC_REGULAR_NOTATION - on SoCs T4240, T2080, LS1043A, etc, the notation between 10GEC and MAC as below: - 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2 - on SoCs T1024, etc, the notation between 10GEC and MAC as below: - 10GEC1->MAC1, 10GEC2->MAC2 - so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to identify the new SoCs on - which 10GEC enumeration is consistent with MAC enumeration. diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 698c91c57f4..5a5a31c75ab 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -825,8 +825,13 @@ config MMC_MTK endif +config FSL_SDHC_V2_3 + bool + config FSL_ESDHC bool "Freescale/NXP eSDHC controller support" + select FSL_SDHC_V2_3 if ARCH_P1010 || ARCH_BSC9131 || ARCH_BSC9132 \ + || ARCH_C29X help This selects support for the eSDHC (Enhanced Secure Digital Host Controller) found on numerous Freescale/NXP SoCs. diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 04ae45665e4..af45ef00dae 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -119,6 +119,13 @@ config SYS_FLASH_EMPTY_INFO bool "Enable displaying empty sectors in flash info" depends on FLASH_CFI_DRIVER +config FLASH_SPANSION_S29WS_N + bool "Non-standard s29ws-n MirrorBit flash" + depends on FLASH_CFI_DRIVER + help + Enable this if the s29ws-n MirrorBit flash has non-standard addresses + for buffered write commands. + config FLASH_CFI_MTD bool "Enable CFI MTD driver" depends on FLASH_CFI_DRIVER @@ -156,6 +163,18 @@ config SYS_FLASH_CHECKSUM If the variable flashchecksum is set in the environment, perform a CRC of the flash and print the value to console. +config FLASH_VERIFY + bool "Compare writes to NOR flash with source location" + depends on MTD_NOR_FLASH + help + If enabled, the content of the flash (destination) is compared + against the source after the write operation. An error message will + be printed when the contents are not identical. Please note that + this option is useless in nearly all cases, since such flash + programming errors usually are detected earlier while + unprotecting/erasing/programming. Please only enable this option if + you really know what you are doing. + config ALTERA_QSPI bool "Altera Generic Quad SPI Controller" depends on DM_MTD diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 0607f959da4..53fb69f5260 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -372,6 +372,7 @@ config FMAN_ENET select SYS_FMAN_V3 if ARCH_B4420 || ARCH_B4860 || ARCH_LS1043A || \ ARCH_LS1046A || ARCH_T1024 || ARCH_T1040 || ARCH_T1042 || \ ARCH_T2080 || ARCH_T4240 + select FSL_FM_10GEC_REGULAR_NOTATION if ARCH_T1024 help This driver support the Freescale FMan Ethernet controller @@ -391,6 +392,18 @@ config SYS_FMAN_V3 help SoC has FMan v3 with mEMAC +config FSL_FM_10GEC_REGULAR_NOTATION + bool + help + On SoCs T4240, T2080, LS1043A, etc, the notation between 10GEC and + MAC as below: + 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2 + While on SoCs T1024, etc, the notation between 10GEC and MAC as below: + 10GEC1->MAC1, 10GEC2->MAC2 + so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to identify the + new SoCs on which 10GEC enumeration is consistent with MAC + enumeration. + config FTMAC100 bool "Ftmac100 Ethernet Support" help diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 42b74aeb9b5..439ed93a237 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -93,7 +93,6 @@ * FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_FLASH_SPANSION_S29WS_N 1 # define CFG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ #endif diff --git a/include/configs/conga-qeval20-qa3-e3845.h b/include/configs/conga-qeval20-qa3-e3845.h index 823d37fc38c..e9b85b4e1c7 100644 --- a/include/configs/conga-qeval20-qa3-e3845.h +++ b/include/configs/conga-qeval20-qa3-e3845.h @@ -17,7 +17,6 @@ "stderr=serial\0" #define VIDEO_IO_OFFSET 0 -#define CONFIG_X86EMU_RAW_IO #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/dfi-bt700.h b/include/configs/dfi-bt700.h index 52f2d50118a..154c4f4f13f 100644 --- a/include/configs/dfi-bt700.h +++ b/include/configs/dfi-bt700.h @@ -21,7 +21,6 @@ "stderr=serial\0" #define VIDEO_IO_OFFSET 0 -#define CONFIG_X86EMU_RAW_IO #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h index c9e0c13172c..8f2dac61cba 100644 --- a/include/configs/exynos5-dt-common.h +++ b/include/configs/exynos5-dt-common.h @@ -17,6 +17,5 @@ #define CFG_SYS_SPI_BASE 0x12D30000 #define FLASH_SIZE (4 << 20) -#define CONFIG_SPI_BOOTING #endif diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h index 7c401a2cfd6..a7f55076926 100644 --- a/include/configs/mccmon6.h +++ b/include/configs/mccmon6.h @@ -25,7 +25,6 @@ /* NOR 16-bit mode */ #define CFG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR -#define CONFIG_FLASH_VERIFY /* NOR Flash MTD */ #define CFG_SYS_FLASH_BANKS_LIST { (CFG_SYS_FLASH_BASE) } diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h index 50c52f8839b..6c15c72efda 100644 --- a/include/configs/minnowmax.h +++ b/include/configs/minnowmax.h @@ -18,6 +18,5 @@ "usb_pgood_delay=40\0" #define VIDEO_IO_OFFSET 0 -#define CONFIG_X86EMU_RAW_IO #endif /* __CONFIG_H */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index af0c8200fc2..601c16ea453 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -34,9 +34,6 @@ /* FLASH and environment organization */ -/* MIU (Memory Interleaving Unit) */ -#define CONFIG_MIU_2BIT_INTERLEAVED - #define RESERVE_BLOCK_SIZE (512) #define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ diff --git a/include/configs/som-db5800-som-6867.h b/include/configs/som-db5800-som-6867.h index ee038d83bc0..f0970921367 100644 --- a/include/configs/som-db5800-som-6867.h +++ b/include/configs/som-db5800-som-6867.h @@ -17,6 +17,5 @@ "stderr=serial,vidconsole\0" #define VIDEO_IO_OFFSET 0 -#define CONFIG_X86EMU_RAW_IO #endif /* __CONFIG_H */ diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index faff8d6ed6d..f81cef0a2c4 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -63,10 +63,6 @@ #define CFG_SYS_DRAM_TEST -#if defined(CONFIG_CF_SBF) -#define CONFIG_SERIAL_BOOT -#endif - /* Reserve 256 kB for Monitor */ /* diff --git a/include/configs/theadorable-x86-common.h b/include/configs/theadorable-x86-common.h index af0a095dfc8..b57b1beaafe 100644 --- a/include/configs/theadorable-x86-common.h +++ b/include/configs/theadorable-x86-common.h @@ -16,7 +16,6 @@ "stderr=serial\0" #define VIDEO_IO_OFFSET 0 -#define CONFIG_X86EMU_RAW_IO /* Environment settings */ diff --git a/include/configs/x86-chromebook.h b/include/configs/x86-chromebook.h index ec87eddd4c7..9df3bfd527f 100644 --- a/include/configs/x86-chromebook.h +++ b/include/configs/x86-chromebook.h @@ -11,7 +11,6 @@ #define CONFIG_X86_REFCODE_RUN_ADDR 0 #define VIDEO_IO_OFFSET 0 -#define CONFIG_X86EMU_RAW_IO #define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,i8042-kbd,serial\0" \ "stdout=vidconsole,serial\0" \ From 5388aa28511c75be387f6bfe868e03fa7505792a Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:22 -0500 Subject: [PATCH 12/41] Convert CONFIG_FSL_ESDHC_PIN_MUX to Kconfig This converts the following to Kconfig: CONFIG_FSL_ESDHC_PIN_MUX Signed-off-by: Tom Rini --- configs/MPC837XERDB_defconfig | 1 + drivers/mmc/Kconfig | 4 ++++ drivers/mmc/fsl_esdhc_imx.c | 2 +- include/configs/MPC837XERDB.h | 1 - 4 files changed, 6 insertions(+), 2 deletions(-) diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig index 40fc1d1da4a..a227ca86de7 100644 --- a/configs/MPC837XERDB_defconfig +++ b/configs/MPC837XERDB_defconfig @@ -195,6 +195,7 @@ CONFIG_SYS_FSL_I2C_OFFSET=0x3000 CONFIG_SYS_I2C_SLAVE=0x7F CONFIG_SYS_I2C_SPEED=400000 CONFIG_FSL_ESDHC=y +CONFIG_FSL_ESDHC_PIN_MUX=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_FLASH_SHOW_PROGRESS=0 diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 5a5a31c75ab..878f867c627 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -891,6 +891,10 @@ config FSL_USDHC help This enables the Ultra Secured Digital Host Controller enhancements +config FSL_ESDHC_PIN_MUX + bool "Perform esdhc device-tree fixup" + depends on (FSL_ESDHC || FSL_ESDHC_IMX) && OF_LIBFDT + endmenu config SYS_FSL_ERRATUM_ESDHC111 diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c index 5ee3ce78231..66caf683f74 100644 --- a/drivers/mmc/fsl_esdhc_imx.c +++ b/drivers/mmc/fsl_esdhc_imx.c @@ -1360,7 +1360,7 @@ int fsl_esdhc_mmc_init(struct bd_info *bis) #if CONFIG_IS_ENABLED(OF_LIBFDT) __weak int esdhc_status_fixup(void *blob, const char *compat) { - if (IS_ENABLED(FSL_ESDHC_PIN_MUX) && !hwconfig("esdhc")) { + if (IS_ENABLED(CONFIG_FSL_ESDHC_PIN_MUX) && !hwconfig("esdhc")) { do_fixup_by_compat(blob, compat, "status", "disabled", sizeof("disabled"), 1); return 1; diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index f312ffb37e2..dbfcdfb738b 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -177,7 +177,6 @@ #define CFG_SYS_PCIE2_IO_PHYS 0xD8000000 #ifdef CONFIG_MMC -#define CONFIG_FSL_ESDHC_PIN_MUX #define CFG_SYS_FSL_ESDHC_ADDR CFG_SYS_MPC83xx_ESDHC_ADDR #endif From ade03b55c4f2306785314080736d1af8d035609f Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:23 -0500 Subject: [PATCH 13/41] env: nvram: Drop CONFIG_SYS_NVRAM_ACCESS_ROUTINE This option is unused anywhere and likely untested for quite a long while. Drop this support code. Signed-off-by: Tom Rini --- env/nvram.c | 42 ++---------------------------------------- 1 file changed, 2 insertions(+), 40 deletions(-) diff --git a/env/nvram.c b/env/nvram.c index fb265235afc..229c34f5367 100644 --- a/env/nvram.c +++ b/env/nvram.c @@ -7,22 +7,6 @@ * Andreas Heppel */ -/* - * 09-18-2001 Andreas Heppel, Sysgo RTS GmbH - * - * It might not be possible in all cases to use 'memcpy()' to copy - * the environment to NVRAM, as the NVRAM might not be mapped into - * the memory space. (I.e. this is the case for the BAB750). In those - * cases it might be possible to access the NVRAM using a different - * method. For example, the RTC on the BAB750 is accessible in IO - * space using its address and data registers. To enable usage of - * NVRAM in those cases I invented the functions 'nvram_read()' and - * 'nvram_write()', which will be activated upon the configuration - * #define CONFIG_SYS_NVRAM_ACCESS_ROUTINE. Note, that those functions are - * strongly dependent on the used HW, and must be redefined for each - * board that wants to use them. - */ - #include #include #include @@ -35,22 +19,14 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE -extern void *nvram_read(void *dest, const long src, size_t count); -extern void nvram_write(long dest, const void *src, size_t count); -#else static env_t *env_ptr = (env_t *)CONFIG_ENV_ADDR; -#endif static int env_nvram_load(void) { char buf[CONFIG_ENV_SIZE]; -#if defined(CONFIG_SYS_NVRAM_ACCESS_ROUTINE) - nvram_read(buf, CONFIG_ENV_ADDR, CONFIG_ENV_SIZE); -#else memcpy(buf, (void *)CONFIG_ENV_ADDR, CONFIG_ENV_SIZE); -#endif + return env_import(buf, 1, H_EXTERNAL); } @@ -63,12 +39,9 @@ static int env_nvram_save(void) if (rcode) return rcode; -#ifdef CONFIG_SYS_NVRAM_ACCESS_ROUTINE - nvram_write(CONFIG_ENV_ADDR, &env_new, CONFIG_ENV_SIZE); -#else if (memcpy((char *)CONFIG_ENV_ADDR, &env_new, CONFIG_ENV_SIZE) == NULL) rcode = 1; -#endif + return rcode; } @@ -79,19 +52,8 @@ static int env_nvram_save(void) */ static int env_nvram_init(void) { -#if defined(CONFIG_SYS_NVRAM_ACCESS_ROUTINE) - ulong crc; - uchar data[ENV_SIZE]; - - nvram_read(&crc, CONFIG_ENV_ADDR, sizeof(ulong)); - nvram_read(data, CONFIG_ENV_ADDR + sizeof(ulong), ENV_SIZE); - - if (crc32(0, data, ENV_SIZE) == crc) { - gd->env_addr = (ulong)CONFIG_ENV_ADDR + sizeof(long); -#else if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) { gd->env_addr = (ulong)&env_ptr->data; -#endif gd->env_valid = ENV_VALID; } else { gd->env_valid = ENV_INVALID; From f3b516852e0ba16f491266218430264789c71f3a Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:24 -0500 Subject: [PATCH 14/41] CONFIG_SYS_MPC8xxx_GUTS_ADDR: Migrate to CFG_SYS Due to whitespace, CONFIG_SYS_MPC8xxx_GUTS_ADDR wasn't migrated to CFG_SYS previously. Do this now. Signed-off-by: Tom Rini --- arch/powerpc/cpu/mpc8xxx/srio.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c index dc1bc0db423..c0b4a1217d3 100644 --- a/arch/powerpc/cpu/mpc8xxx/srio.c +++ b/arch/powerpc/cpu/mpc8xxx/srio.c @@ -33,17 +33,17 @@ #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2 #endif #define _DEVDISR_RMU FSL_CORENET_DEVDISR_RMU - #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CFG_SYS_MPC85xx_GUTS_ADDR + #define CFG_SYS_MPC8xxx_GUTS_ADDR CFG_SYS_MPC85xx_GUTS_ADDR #elif defined(CONFIG_MPC85xx) #define _DEVDISR_SRIO1 MPC85xx_DEVDISR_SRIO #define _DEVDISR_SRIO2 MPC85xx_DEVDISR_SRIO #define _DEVDISR_RMU MPC85xx_DEVDISR_RMSG - #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CFG_SYS_MPC85xx_GUTS_ADDR + #define CFG_SYS_MPC8xxx_GUTS_ADDR CFG_SYS_MPC85xx_GUTS_ADDR #elif defined(CONFIG_MPC86xx) #define _DEVDISR_SRIO1 MPC86xx_DEVDISR_SRIO #define _DEVDISR_SRIO2 MPC86xx_DEVDISR_SRIO #define _DEVDISR_RMU MPC86xx_DEVDISR_RMSG - #define CONFIG_SYS_MPC8xxx_GUTS_ADDR \ + #define CFG_SYS_MPC8xxx_GUTS_ADDR \ (&((immap_t *)CONFIG_SYS_IMMR)->im_gur) #else #error "No defines for DEVDISR_SRIO" @@ -230,7 +230,7 @@ host_ok: void srio_init(void) { - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR; + ccsr_gur_t *gur = (void *)CFG_SYS_MPC8xxx_GUTS_ADDR; int srio1_used = 0, srio2_used = 0; u32 *devdisr; From b95de034c51bfeabde26e8ca6a11f25e91f2405b Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:25 -0500 Subject: [PATCH 15/41] meson64: Fix missing CFG_SYS_BAUDRATE_TABLE migration CONFIG_SYS_BAUDRATE_TABLE has already been migrated to CFG_SYS but this instance was missed, correct. Signed-off-by: Tom Rini --- include/configs/meson64.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/meson64.h b/include/configs/meson64.h index 6331b7615db..a22f7a81b00 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -18,7 +18,7 @@ /* Serial drivers */ /* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, \ 230400, 250000, 460800, 500000, 1000000, 2000000, 4000000, \ 8000000 } From 3f7a4965319920d0d029318399bbc0fe51ab0c08 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:26 -0500 Subject: [PATCH 16/41] Convert CONFIG_POWER_PCA9450 to Kconfig This converts the following to Kconfig: CONFIG_POWER_PCA9450 Signed-off-by: Tom Rini --- configs/imx8mp-icore-mx8mp-edimm2.2_defconfig | 1 + configs/imx8mp_evk_defconfig | 1 + configs/phycore-imx8mp_defconfig | 1 + configs/verdin-imx8mp_defconfig | 1 + drivers/power/pmic/Kconfig | 3 +++ include/configs/imx8mp_evk.h | 8 -------- include/configs/imx8mp_icore_mx8mp.h | 7 ------- include/configs/phycore_imx8mp.h | 6 ------ include/configs/verdin-imx8mp.h | 3 --- 9 files changed, 7 insertions(+), 24 deletions(-) diff --git a/configs/imx8mp-icore-mx8mp-edimm2.2_defconfig b/configs/imx8mp-icore-mx8mp-edimm2.2_defconfig index f679fbe2514..e3588473d59 100644 --- a/configs/imx8mp-icore-mx8mp-edimm2.2_defconfig +++ b/configs/imx8mp-icore-mx8mp-edimm2.2_defconfig @@ -99,6 +99,7 @@ CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y CONFIG_SPL_POWER_LEGACY=y +CONFIG_POWER_PCA9450=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig index 91ec39d0237..10802eb9619 100644 --- a/configs/imx8mp_evk_defconfig +++ b/configs/imx8mp_evk_defconfig @@ -99,6 +99,7 @@ CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y CONFIG_SPL_POWER_LEGACY=y +CONFIG_POWER_PCA9450=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index 248631b7a8f..82e4f1ed970 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -107,6 +107,7 @@ CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y CONFIG_SPL_POWER_LEGACY=y +CONFIG_POWER_PCA9450=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig index bae8179bfde..153c7c15197 100644 --- a/configs/verdin-imx8mp_defconfig +++ b/configs/verdin-imx8mp_defconfig @@ -143,6 +143,7 @@ CONFIG_SPL_POWER_LEGACY=y CONFIG_POWER_DOMAIN=y CONFIG_IMX8M_POWER_DOMAIN=y CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y +CONFIG_POWER_PCA9450=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig index d94048db5f7..176fb07c651 100644 --- a/drivers/power/pmic/Kconfig +++ b/drivers/power/pmic/Kconfig @@ -416,6 +416,9 @@ config POWER_HI6553 config POWER_LTC3676 bool "Enable legacy driver for LTC3676 PMIC" +config POWER_PCA9450 + bool "Enable legacy driver for PCA9450 PMIC" + config POWER_PFUZE100 bool "Enable legacy driver for PFUZE100 PMIC" diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 738677ff37c..137bd3b0952 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -12,14 +12,6 @@ #define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD -/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ - - -#define CONFIG_POWER_PCA9450 - -#endif - #if defined(CONFIG_CMD_NET) #define CONFIG_FEC_MXC_PHYADDR 1 diff --git a/include/configs/imx8mp_icore_mx8mp.h b/include/configs/imx8mp_icore_mx8mp.h index d67bad8971d..b261a81e44a 100644 --- a/include/configs/imx8mp_icore_mx8mp.h +++ b/include/configs/imx8mp_icore_mx8mp.h @@ -13,13 +13,6 @@ #define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD -/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ - -#define CONFIG_POWER_PCA9450 - -#endif - #if defined(CONFIG_CMD_NET) #define CONFIG_FEC_MXC_PHYADDR 1 diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index 11a833bb127..7a38382034a 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -13,12 +13,6 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) -#ifdef CONFIG_SPL_BUILD - -#define CONFIG_POWER_PCA9450 - -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "image=Image\0" \ "console=ttymxc0,115200\0" \ diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h index 88839a6e561..22dc364223c 100644 --- a/include/configs/verdin-imx8mp.h +++ b/include/configs/verdin-imx8mp.h @@ -19,9 +19,6 @@ #define CONFIG_MALLOC_F_ADDR 0x184000 /* For RAW image gives a error info not panic */ -#define CONFIG_POWER_PCA9450 - -#define CONFIG_SYS_I2C #endif /* CONFIG_SPL_BUILD */ #define MEM_LAYOUT_ENV_SETTINGS \ From 54f80dd2908af0b851816cf062edf2d454948397 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:27 -0500 Subject: [PATCH 17/41] Convert CONFIG_HOSTNAME et al to Kconfig This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini --- README | 32 ------------ arch/powerpc/Kconfig | 12 +++++ configs/M5208EVBE_defconfig | 10 ++++ configs/M5235EVB_Flash32_defconfig | 10 ++++ configs/M5235EVB_defconfig | 10 ++++ configs/M5253DEMO_defconfig | 2 + configs/M5272C3_defconfig | 10 ++++ configs/M5282EVB_defconfig | 10 ++++ configs/M53017EVB_defconfig | 10 ++++ configs/M5329AFEE_defconfig | 10 ++++ configs/M5329BFEE_defconfig | 10 ++++ configs/M5373EVB_defconfig | 10 ++++ configs/MCR3000_defconfig | 6 +++ configs/MPC837XERDB_defconfig | 5 ++ configs/MPC8548CDS_36BIT_defconfig | 13 +++++ configs/MPC8548CDS_defconfig | 13 +++++ configs/MPC8548CDS_legacy_defconfig | 13 +++++ configs/P1010RDB-PA_36BIT_NAND_defconfig | 2 + configs/P1010RDB-PA_36BIT_NOR_defconfig | 2 + configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 2 + configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 2 + configs/P1010RDB-PA_NAND_defconfig | 2 + configs/P1010RDB-PA_NOR_defconfig | 2 + configs/P1010RDB-PA_SDCARD_defconfig | 2 + configs/P1010RDB-PA_SPIFLASH_defconfig | 2 + configs/P1010RDB-PB_36BIT_NAND_defconfig | 2 + configs/P1010RDB-PB_36BIT_NOR_defconfig | 2 + configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 2 + configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 2 + configs/P1010RDB-PB_NAND_defconfig | 2 + configs/P1010RDB-PB_NOR_defconfig | 2 + configs/P1010RDB-PB_SDCARD_defconfig | 2 + configs/P1010RDB-PB_SPIFLASH_defconfig | 2 + configs/P1020RDB-PC_36BIT_NAND_defconfig | 3 ++ configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 3 ++ configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 3 ++ configs/P1020RDB-PC_36BIT_defconfig | 3 ++ configs/P1020RDB-PC_NAND_defconfig | 3 ++ configs/P1020RDB-PC_SDCARD_defconfig | 3 ++ configs/P1020RDB-PC_SPIFLASH_defconfig | 3 ++ configs/P1020RDB-PC_defconfig | 3 ++ configs/P1020RDB-PD_NAND_defconfig | 3 ++ configs/P1020RDB-PD_SDCARD_defconfig | 3 ++ configs/P1020RDB-PD_SPIFLASH_defconfig | 3 ++ configs/P1020RDB-PD_defconfig | 3 ++ configs/P2020RDB-PC_36BIT_NAND_defconfig | 3 ++ configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 3 ++ configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 3 ++ configs/P2020RDB-PC_36BIT_defconfig | 3 ++ configs/P2020RDB-PC_NAND_defconfig | 3 ++ configs/P2020RDB-PC_SDCARD_defconfig | 3 ++ configs/P2020RDB-PC_SPIFLASH_defconfig | 3 ++ configs/P2020RDB-PC_defconfig | 3 ++ configs/P2041RDB_NAND_defconfig | 2 + configs/P2041RDB_SDCARD_defconfig | 2 + configs/P2041RDB_SPIFLASH_defconfig | 2 + configs/P2041RDB_defconfig | 2 + configs/T1024RDB_NAND_defconfig | 2 + configs/T1024RDB_SDCARD_defconfig | 2 + configs/T1024RDB_SPIFLASH_defconfig | 2 + configs/T1024RDB_defconfig | 2 + configs/T1042D4RDB_NAND_defconfig | 2 + configs/T1042D4RDB_SDCARD_defconfig | 2 + configs/T1042D4RDB_SPIFLASH_defconfig | 2 + configs/T1042D4RDB_defconfig | 2 + configs/T2080QDS_NAND_defconfig | 2 + configs/T2080QDS_SDCARD_defconfig | 2 + configs/T2080QDS_SECURE_BOOT_defconfig | 2 + configs/T2080QDS_SPIFLASH_defconfig | 2 + configs/T2080QDS_SRIO_PCIE_BOOT_defconfig | 2 + configs/T2080QDS_defconfig | 2 + configs/T2080RDB_NAND_defconfig | 2 + configs/T2080RDB_SDCARD_defconfig | 2 + configs/T2080RDB_SPIFLASH_defconfig | 2 + configs/T2080RDB_defconfig | 2 + configs/T2080RDB_revD_NAND_defconfig | 2 + configs/T2080RDB_revD_SDCARD_defconfig | 2 + configs/T2080RDB_revD_SPIFLASH_defconfig | 2 + configs/T2080RDB_revD_defconfig | 2 + configs/T4240RDB_SDCARD_defconfig | 2 + configs/T4240RDB_defconfig | 2 + configs/amcore_defconfig | 2 + configs/apalis-imx8_defconfig | 6 +++ configs/apalis-tk1_defconfig | 6 +++ configs/apalis_imx6_defconfig | 6 +++ configs/aristainetos2c_defconfig | 2 + configs/aristainetos2ccslb_defconfig | 2 + configs/bayleybay_defconfig | 1 + configs/bcm_ns3_defconfig | 2 + configs/cherryhill_defconfig | 1 + configs/chromebook_coral_defconfig | 1 + configs/chromebook_link64_defconfig | 1 + configs/chromebook_link_defconfig | 1 + configs/chromebook_samus_defconfig | 1 + configs/chromebox_panther_defconfig | 1 + configs/cobra5272_defconfig | 4 ++ configs/colibri-imx6ull-emmc_defconfig | 6 +++ configs/colibri-imx6ull_defconfig | 6 +++ configs/colibri-imx8x_defconfig | 6 +++ configs/colibri_imx6_defconfig | 6 +++ configs/colibri_imx7_defconfig | 6 +++ configs/colibri_imx7_emmc_defconfig | 6 +++ configs/colibri_vf_defconfig | 6 +++ ...-qeval20-qa3-e3845-internal-uart_defconfig | 1 + configs/conga-qeval20-qa3-e3845_defconfig | 1 + configs/controlcenterdc_defconfig | 3 ++ configs/coreboot64_defconfig | 1 + configs/coreboot_defconfig | 1 + configs/cougarcanyon2_defconfig | 1 + configs/crownbay_defconfig | 1 + configs/dfi-bt700-q7x-151_defconfig | 1 + configs/draco_defconfig | 2 + configs/efi-x86_app32_defconfig | 1 + configs/efi-x86_app64_defconfig | 1 + configs/efi-x86_payload32_defconfig | 1 + configs/efi-x86_payload64_defconfig | 1 + configs/etamin_defconfig | 2 + configs/galileo_defconfig | 1 + configs/gazerbeam_defconfig | 3 ++ configs/gwventana_emmc_defconfig | 4 ++ configs/gwventana_gw5904_defconfig | 4 ++ configs/gwventana_nand_defconfig | 4 ++ configs/imx28_xea_defconfig | 2 + configs/imx28_xea_sb_defconfig | 2 + configs/integratorcp_cm1136_defconfig | 4 ++ configs/integratorcp_cm920t_defconfig | 4 ++ configs/integratorcp_cm926ejs_defconfig | 4 ++ configs/integratorcp_cm946es_defconfig | 4 ++ configs/kontron-sl-mx6ul_defconfig | 2 + configs/kontron-sl-mx8mm_defconfig | 2 + configs/m53menlo_defconfig | 2 + configs/microblaze-generic_defconfig | 2 + configs/minnowmax_defconfig | 1 + configs/mt7622_rfb_defconfig | 4 ++ configs/mt7623a_unielec_u7623_02_defconfig | 4 ++ configs/mt7623n_bpir2_defconfig | 4 ++ configs/mt7629_rfb_defconfig | 4 ++ configs/mvebu_ac5_rd_defconfig | 10 ++++ configs/novena_defconfig | 2 + configs/opos6uldev_defconfig | 2 + configs/pg_wcom_expu1_defconfig | 2 + configs/pg_wcom_expu1_update_defconfig | 2 + configs/pg_wcom_seli8_defconfig | 2 + configs/pg_wcom_seli8_update_defconfig | 2 + configs/poleg_evb_defconfig | 6 +++ configs/pxm2_defconfig | 2 + configs/qemu-ppce500_defconfig | 2 + configs/qemu-x86_64_defconfig | 1 + configs/qemu-x86_defconfig | 1 + configs/rastaban_defconfig | 2 + configs/rut_defconfig | 2 + configs/seeed_npi_imx6ull_defconfig | 2 + configs/slimbootloader_defconfig | 1 + configs/socfpga_vining_fpga_defconfig | 2 + configs/som-db5800-som-6867_defconfig | 1 + ...stm32mp15-icore-stm32mp1-ctouch2_defconfig | 2 + ...tm32mp15-icore-stm32mp1-edimm2.2_defconfig | 2 + ...-microgea-stm32mp1-microdev2-of7_defconfig | 2 + ...mp15-microgea-stm32mp1-microdev2_defconfig | 2 + configs/stm32mp15_basic_defconfig | 2 + configs/stm32mp15_defconfig | 2 + configs/stm32mp15_dhcom_basic_defconfig | 2 + configs/stm32mp15_dhcor_basic_defconfig | 2 + configs/stm32mp15_trusted_defconfig | 2 + configs/stmark2_defconfig | 2 + ...able-x86-conga-qa3-e3845-pcie-x4_defconfig | 1 + .../theadorable-x86-conga-qa3-e3845_defconfig | 1 + configs/theadorable-x86-dfi-bt700_defconfig | 1 + configs/thuban_defconfig | 2 + configs/uniphier_ld4_sld8_defconfig | 10 ++++ configs/uniphier_v7_defconfig | 10 ++++ configs/uniphier_v8_defconfig | 10 ++++ configs/usbarmory_defconfig | 2 + env/Kconfig | 10 ++++ include/configs/M5208EVBE.h | 8 --- include/configs/M5235EVB.h | 7 --- include/configs/M5253DEMO.h | 2 - include/configs/M5272C3.h | 8 --- include/configs/M5282EVB.h | 8 --- include/configs/M53017EVB.h | 8 --- include/configs/M5329EVB.h | 8 --- include/configs/M5373EVB.h | 8 --- include/configs/MCR3000.h | 4 -- include/configs/MPC837XERDB.h | 4 -- include/configs/MPC8548CDS.h | 12 +---- include/configs/P1010RDB.h | 5 +- include/configs/P2041RDB.h | 4 +- include/configs/T102xRDB.h | 4 +- include/configs/T104xRDB.h | 4 +- include/configs/T208xQDS.h | 4 +- include/configs/T208xRDB.h | 4 +- include/configs/T4240RDB.h | 4 +- include/configs/amcore.h | 2 - include/configs/apalis-imx8.h | 3 -- include/configs/apalis-tk1.h | 6 --- include/configs/apalis_imx6.h | 6 --- include/configs/aristainetos2.h | 2 - include/configs/bcm_ns3.h | 2 - include/configs/cobra5272.h | 3 -- include/configs/colibri-imx6ull.h | 4 -- include/configs/colibri-imx8x.h | 4 -- include/configs/colibri_imx6.h | 6 --- include/configs/colibri_imx7.h | 4 -- include/configs/colibri_vf.h | 4 -- include/configs/controlcenterdc.h | 3 -- include/configs/gazerbeam.h | 4 -- include/configs/gw_ventana.h | 2 - include/configs/integratorcp.h | 3 -- include/configs/kontron-sl-mx6ul.h | 1 - include/configs/kontron-sl-mx8mm.h | 1 - include/configs/m53menlo.h | 1 - include/configs/microblaze-generic.h | 2 - include/configs/mt7622.h | 2 - include/configs/mt7623.h | 2 - include/configs/mt7629.h | 2 - include/configs/mvebu_alleycat-5.h | 5 -- include/configs/novena.h | 1 - include/configs/npi_imx6ull.h | 2 - include/configs/opos6uldev.h | 2 - include/configs/p1_p2_rdb_pc.h | 5 +- include/configs/poleg.h | 3 -- include/configs/qemu-ppce500.h | 2 - include/configs/siemens-am33x-common.h | 2 - include/configs/socfpga_vining_fpga.h | 1 - include/configs/stm32mp15_common.h | 3 -- include/configs/stmark2.h | 2 - include/configs/uniphier.h | 6 --- include/configs/usbarmory.h | 1 - include/configs/x86-common.h | 2 - include/configs/xea.h | 1 - include/env_default.h | 22 ++++---- net/Kconfig | 52 +++++++++++++++++++ 232 files changed, 643 insertions(+), 247 deletions(-) diff --git a/README b/README index b833aca2e58..c0f55b2586c 100644 --- a/README +++ b/README @@ -734,38 +734,6 @@ The following options need to be configured: Some PHY like Intel LXT971A need extra delay after command issued before MII status register can be read -- IP address: - CONFIG_IPADDR - - Define a default value for the IP address to use for - the default Ethernet interface, in case this is not - determined through e.g. bootp. - (Environment variable "ipaddr") - -- Server IP address: - CONFIG_SERVERIP - - Defines a default value for the IP address of a TFTP - server to contact when using the "tftboot" command. - (Environment variable "serverip") - -- Gateway IP address: - CONFIG_GATEWAYIP - - Defines a default value for the IP address of the - default router where packets to other networks are - sent to. - (Environment variable "gatewayip") - -- Subnet mask: - CONFIG_NETMASK - - Defines a default value for the subnet mask (or - routing prefix) which is used to determine if an IP - address belongs to the local subnet or needs to be - forwarded through a router. - (Environment variable "netmask") - - BOOTP Recovery Mode: CONFIG_BOOTP_RANDOM_DELAY diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0fc4ceda000..e0801c25941 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -68,4 +68,16 @@ source "arch/powerpc/cpu/mpc85xx/Kconfig" source "arch/powerpc/cpu/mpc8xx/Kconfig" source "arch/powerpc/lib/Kconfig" +config USE_UBOOTPATH + bool "Set a default 'uboot' value in the environment" + help + Many default environment scripts will check the "uboot" variable + to determine the name of the file to load via tftp that will then + be written to flash. + +config UBOOTPATH + string "Value of the default 'uboot' value in the environment" + depends on USE_UBOOTPATH + default "u-boot.bin" + endmenu diff --git a/configs/M5208EVBE_defconfig b/configs/M5208EVBE_defconfig index 20250c02a11..263e57f46a0 100644 --- a/configs/M5208EVBE_defconfig +++ b/configs/M5208EVBE_defconfig @@ -26,8 +26,18 @@ CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="M5208EVBe" CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y CONFIG_UDP_CHECKSUM=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.162.1.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.162.1.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.162.1.1" CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y diff --git a/configs/M5235EVB_Flash32_defconfig b/configs/M5235EVB_Flash32_defconfig index 38c5076d5f8..88c11162111 100644 --- a/configs/M5235EVB_Flash32_defconfig +++ b/configs/M5235EVB_Flash32_defconfig @@ -34,7 +34,17 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="u-boot.bin" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="M5235EVB" CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.162.1.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.162.1.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.162.1.1" CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y diff --git a/configs/M5235EVB_defconfig b/configs/M5235EVB_defconfig index cb5bcb7221c..255f3b9d2f1 100644 --- a/configs/M5235EVB_defconfig +++ b/configs/M5235EVB_defconfig @@ -34,7 +34,17 @@ CONFIG_ENV_IS_IN_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="u-boot.bin" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="M5235EVB" CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.162.1.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.162.1.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.162.1.1" CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y diff --git a/configs/M5253DEMO_defconfig b/configs/M5253DEMO_defconfig index 2684ce05f26..4de6290b7d3 100644 --- a/configs/M5253DEMO_defconfig +++ b/configs/M5253DEMO_defconfig @@ -26,6 +26,8 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MAC_PARTITION=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="M5253DEMO" # CONFIG_BLOCK_CACHE is not set CONFIG_SYS_IDE_MAXBUS=1 CONFIG_SYS_ATA_STRIDE=4 diff --git a/configs/M5272C3_defconfig b/configs/M5272C3_defconfig index f2d70a4e269..324daa016ef 100644 --- a/configs/M5272C3_defconfig +++ b/configs/M5272C3_defconfig @@ -27,7 +27,17 @@ CONFIG_MII_INIT=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="M5272C3" CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.162.1.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.162.1.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.162.1.1" CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_SYS_BR0_PRELIM_BOOL=y CONFIG_SYS_BR0_PRELIM=0xFFE00201 diff --git a/configs/M5282EVB_defconfig b/configs/M5282EVB_defconfig index 0ef2e7b4ffe..7988d250034 100644 --- a/configs/M5282EVB_defconfig +++ b/configs/M5282EVB_defconfig @@ -27,7 +27,17 @@ CONFIG_MII_INIT=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="M5282EVB" CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.162.1.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.162.1.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.162.1.1" CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y diff --git a/configs/M53017EVB_defconfig b/configs/M53017EVB_defconfig index b6783ab95ba..d7c07aa2ea9 100644 --- a/configs/M53017EVB_defconfig +++ b/configs/M53017EVB_defconfig @@ -28,8 +28,18 @@ CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_ENV_IS_IN_FLASH=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="M53017" CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y CONFIG_UDP_CHECKSUM=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.162.1.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.162.1.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.162.1.1" CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y diff --git a/configs/M5329AFEE_defconfig b/configs/M5329AFEE_defconfig index 6fede625fb8..989af925f74 100644 --- a/configs/M5329AFEE_defconfig +++ b/configs/M5329AFEE_defconfig @@ -27,8 +27,18 @@ CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="M5329EVB" CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y CONFIG_UDP_CHECKSUM=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.162.1.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.162.1.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.162.1.1" CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y diff --git a/configs/M5329BFEE_defconfig b/configs/M5329BFEE_defconfig index fe70245497c..7be2a27ba2b 100644 --- a/configs/M5329BFEE_defconfig +++ b/configs/M5329BFEE_defconfig @@ -28,8 +28,18 @@ CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="M5329EVB" CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y CONFIG_UDP_CHECKSUM=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.162.1.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.162.1.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.162.1.1" CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y diff --git a/configs/M5373EVB_defconfig b/configs/M5373EVB_defconfig index b074cf520ff..4b278a5b1c8 100644 --- a/configs/M5373EVB_defconfig +++ b/configs/M5373EVB_defconfig @@ -28,8 +28,18 @@ CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="M5373EVB" CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y CONFIG_UDP_CHECKSUM=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.162.1.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.162.1.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.162.1.1" CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y diff --git a/configs/MCR3000_defconfig b/configs/MCR3000_defconfig index 7d54807e645..3e16ffc2ef2 100644 --- a/configs/MCR3000_defconfig +++ b/configs/MCR3000_defconfig @@ -55,6 +55,12 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.0.3" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.0.0.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.0.1" CONFIG_SYS_BR0_PRELIM_BOOL=y CONFIG_SYS_BR0_PRELIM=0x4000801 CONFIG_SYS_OR0_PRELIM=0xFFC00926 diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig index a227ca86de7..7287ca6b247 100644 --- a/configs/MPC837XERDB_defconfig +++ b/configs/MPC837XERDB_defconfig @@ -148,6 +148,7 @@ CONFIG_SPCR_TSECEP_3=y CONFIG_LCRR_DBYP_PLL_BYPASSED=y CONFIG_LCRR_CLKDIV_8=y CONFIG_FSL_SERDES=y +CONFIG_USE_UBOOTPATH=y CONFIG_SYS_MONITOR_LEN=524288 CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y @@ -178,6 +179,10 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="TSEC0" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="mpc837x_rdb" +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/nfsroot" CONFIG_FSL_SATA=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_SYS_BR0_PRELIM_BOOL=y diff --git a/configs/MPC8548CDS_36BIT_defconfig b/configs/MPC8548CDS_36BIT_defconfig index c6f5d87bb95..241cb80fde9 100644 --- a/configs/MPC8548CDS_36BIT_defconfig +++ b/configs/MPC8548CDS_36BIT_defconfig @@ -14,6 +14,8 @@ CONFIG_SRIO1=y CONFIG_TARGET_MPC8548CDS=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y +CONFIG_USE_UBOOTPATH=y +CONFIG_UBOOTPATH="8548cds/u-boot.bin" CONFIG_PCIE1=y CONFIG_PHYS_64BIT=y CONFIG_SYS_MONITOR_LEN=524288 @@ -45,6 +47,17 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="8548cds/uImage.uboot" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC0" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.168.1.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.253" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/nfsroot" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.1" CONFIG_SPD_EEPROM=y CONFIG_CHIP_SELECTS_PER_CTRL=2 CONFIG_DDR_ECC=y diff --git a/configs/MPC8548CDS_defconfig b/configs/MPC8548CDS_defconfig index b6ebac39805..5af056bd4f4 100644 --- a/configs/MPC8548CDS_defconfig +++ b/configs/MPC8548CDS_defconfig @@ -14,6 +14,8 @@ CONFIG_SRIO1=y CONFIG_TARGET_MPC8548CDS=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y +CONFIG_USE_UBOOTPATH=y +CONFIG_UBOOTPATH="8548cds/u-boot.bin" CONFIG_PCIE1=y CONFIG_SYS_MONITOR_LEN=524288 CONFIG_OF_BOARD_SETUP=y @@ -44,6 +46,17 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="8548cds/uImage.uboot" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC0" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.168.1.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.253" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/nfsroot" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.1" CONFIG_SPD_EEPROM=y CONFIG_CHIP_SELECTS_PER_CTRL=2 CONFIG_DDR_ECC=y diff --git a/configs/MPC8548CDS_legacy_defconfig b/configs/MPC8548CDS_legacy_defconfig index d272ede8d4a..34d1938129f 100644 --- a/configs/MPC8548CDS_legacy_defconfig +++ b/configs/MPC8548CDS_legacy_defconfig @@ -15,6 +15,8 @@ CONFIG_TARGET_MPC8548CDS=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_TARGET_MPC8548CDS_LEGACY=y +CONFIG_USE_UBOOTPATH=y +CONFIG_UBOOTPATH="8548cds/u-boot.bin" CONFIG_PCIE1=y CONFIG_SYS_MONITOR_LEN=524288 CONFIG_OF_BOARD_SETUP=y @@ -44,6 +46,17 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="8548cds/uImage.uboot" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC0" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.168.1.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.253" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/nfsroot" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.1" CONFIG_SPD_EEPROM=y CONFIG_CHIP_SELECTS_PER_CTRL=2 CONFIG_DDR_ECC=y diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig index b32837c778c..3fb993e201c 100644 --- a/configs/P1010RDB-PA_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1010RDB_PA=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -81,6 +82,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PA_36BIT_NOR_defconfig b/configs/P1010RDB-PA_36BIT_NOR_defconfig index 575d5bffcb2..dc6dd717df9 100644 --- a/configs/P1010RDB-PA_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PA_36BIT_NOR_defconfig @@ -11,6 +11,7 @@ CONFIG_TARGET_P1010RDB_PA=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -49,6 +50,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig index 21c752d9747..bc29526f636 100644 --- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig @@ -17,6 +17,7 @@ CONFIG_TARGET_P1010RDB_PA=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -71,6 +72,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig index a514d4ba36d..5c42d5ee367 100644 --- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1010RDB_PA=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -73,6 +74,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig index db71e9bce4e..b6e68d27885 100644 --- a/configs/P1010RDB-PA_NAND_defconfig +++ b/configs/P1010RDB-PA_NAND_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1010RDB_PA=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -80,6 +81,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig index 291c4a40380..fe24faa1757 100644 --- a/configs/P1010RDB-PA_NOR_defconfig +++ b/configs/P1010RDB-PA_NOR_defconfig @@ -11,6 +11,7 @@ CONFIG_TARGET_P1010RDB_PA=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -48,6 +49,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PA_SDCARD_defconfig b/configs/P1010RDB-PA_SDCARD_defconfig index 8237da39c27..110a9b4ad3d 100644 --- a/configs/P1010RDB-PA_SDCARD_defconfig +++ b/configs/P1010RDB-PA_SDCARD_defconfig @@ -17,6 +17,7 @@ CONFIG_TARGET_P1010RDB_PA=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -70,6 +71,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PA_SPIFLASH_defconfig b/configs/P1010RDB-PA_SPIFLASH_defconfig index 9cb53d64e23..fcd60f7a4ef 100644 --- a/configs/P1010RDB-PA_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_SPIFLASH_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1010RDB_PA=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -72,6 +73,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig index 95746971087..76919c3881f 100644 --- a/configs/P1010RDB-PB_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1010RDB_PB=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -82,6 +83,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PB_36BIT_NOR_defconfig b/configs/P1010RDB-PB_36BIT_NOR_defconfig index 7b3919dc162..b2972586946 100644 --- a/configs/P1010RDB-PB_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PB_36BIT_NOR_defconfig @@ -11,6 +11,7 @@ CONFIG_TARGET_P1010RDB_PB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -50,6 +51,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig index 3ad137dbd56..df80488cff1 100644 --- a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig @@ -17,6 +17,7 @@ CONFIG_TARGET_P1010RDB_PB=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -72,6 +73,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig index cde657ce007..d27ea17a0b6 100644 --- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1010RDB_PB=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -74,6 +75,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig index 1faeab2c3b3..88de4f9b92e 100644 --- a/configs/P1010RDB-PB_NAND_defconfig +++ b/configs/P1010RDB-PB_NAND_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1010RDB_PB=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -81,6 +82,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PB_NOR_defconfig b/configs/P1010RDB-PB_NOR_defconfig index 190d02fa504..2e86aec5958 100644 --- a/configs/P1010RDB-PB_NOR_defconfig +++ b/configs/P1010RDB-PB_NOR_defconfig @@ -11,6 +11,7 @@ CONFIG_TARGET_P1010RDB_PB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -49,6 +50,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PB_SDCARD_defconfig b/configs/P1010RDB-PB_SDCARD_defconfig index 5e32768c28d..d5bbd6dca54 100644 --- a/configs/P1010RDB-PB_SDCARD_defconfig +++ b/configs/P1010RDB-PB_SDCARD_defconfig @@ -17,6 +17,7 @@ CONFIG_TARGET_P1010RDB_PB=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -71,6 +72,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1010RDB-PB_SPIFLASH_defconfig b/configs/P1010RDB-PB_SPIFLASH_defconfig index bce763c73bf..66efe739e99 100644 --- a/configs/P1010RDB-PB_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_SPIFLASH_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1010RDB_PB=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -73,6 +74,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig index b9d52a755da..0f082f6e6e2 100644 --- a/configs/P1020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1020RDB_PC=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -81,6 +82,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig index f86bc553da4..88e10af29a3 100644 --- a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig @@ -17,6 +17,7 @@ CONFIG_TARGET_P1020RDB_PC=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -72,6 +73,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig index 0b9e108ba58..729e93eae23 100644 --- a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1020RDB_PC=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -74,6 +75,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P1020RDB-PC_36BIT_defconfig b/configs/P1020RDB-PC_36BIT_defconfig index 9f68ede4bef..2860c286d71 100644 --- a/configs/P1020RDB-PC_36BIT_defconfig +++ b/configs/P1020RDB-PC_36BIT_defconfig @@ -12,6 +12,7 @@ CONFIG_TARGET_P1020RDB_PC=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -51,6 +52,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P1020RDB-PC_NAND_defconfig b/configs/P1020RDB-PC_NAND_defconfig index 3dd2475643d..0958a0a94b5 100644 --- a/configs/P1020RDB-PC_NAND_defconfig +++ b/configs/P1020RDB-PC_NAND_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1020RDB_PC=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -80,6 +81,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P1020RDB-PC_SDCARD_defconfig b/configs/P1020RDB-PC_SDCARD_defconfig index bd64dcc9ef4..81bb26cb8fd 100644 --- a/configs/P1020RDB-PC_SDCARD_defconfig +++ b/configs/P1020RDB-PC_SDCARD_defconfig @@ -17,6 +17,7 @@ CONFIG_TARGET_P1020RDB_PC=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -71,6 +72,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P1020RDB-PC_SPIFLASH_defconfig b/configs/P1020RDB-PC_SPIFLASH_defconfig index 140d271a197..481009f3076 100644 --- a/configs/P1020RDB-PC_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_SPIFLASH_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1020RDB_PC=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -73,6 +74,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P1020RDB-PC_defconfig b/configs/P1020RDB-PC_defconfig index 3f653895abf..49207eb65a0 100644 --- a/configs/P1020RDB-PC_defconfig +++ b/configs/P1020RDB-PC_defconfig @@ -12,6 +12,7 @@ CONFIG_TARGET_P1020RDB_PC=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -50,6 +51,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig index abe064c04e9..7e22b4e34c5 100644 --- a/configs/P1020RDB-PD_NAND_defconfig +++ b/configs/P1020RDB-PD_NAND_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1020RDB_PD=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -83,6 +84,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P1020RDB-PD_SDCARD_defconfig b/configs/P1020RDB-PD_SDCARD_defconfig index 78a54dd461d..62b25f03983 100644 --- a/configs/P1020RDB-PD_SDCARD_defconfig +++ b/configs/P1020RDB-PD_SDCARD_defconfig @@ -17,6 +17,7 @@ CONFIG_TARGET_P1020RDB_PD=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -74,6 +75,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P1020RDB-PD_SPIFLASH_defconfig b/configs/P1020RDB-PD_SPIFLASH_defconfig index a8bdb5a2209..f5864dea4db 100644 --- a/configs/P1020RDB-PD_SPIFLASH_defconfig +++ b/configs/P1020RDB-PD_SPIFLASH_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P1020RDB_PD=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -76,6 +77,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig index 7a533ed41d7..ca040072884 100644 --- a/configs/P1020RDB-PD_defconfig +++ b/configs/P1020RDB-PD_defconfig @@ -12,6 +12,7 @@ CONFIG_TARGET_P1020RDB_PD=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -53,6 +54,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P2020RDB-PC_36BIT_NAND_defconfig b/configs/P2020RDB-PC_36BIT_NAND_defconfig index 3abb9d7f75b..2420217b890 100644 --- a/configs/P2020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P2020RDB-PC_36BIT_NAND_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P2020RDB=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -85,6 +86,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig index 551b5fca8e0..22b0023ec6c 100644 --- a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig @@ -17,6 +17,7 @@ CONFIG_TARGET_P2020RDB=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -76,6 +77,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig index 493e2c94c14..8c95203a4a0 100644 --- a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P2020RDB=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -78,6 +79,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P2020RDB-PC_36BIT_defconfig b/configs/P2020RDB-PC_36BIT_defconfig index fc82fa8ab98..b87c965d50b 100644 --- a/configs/P2020RDB-PC_36BIT_defconfig +++ b/configs/P2020RDB-PC_36BIT_defconfig @@ -12,6 +12,7 @@ CONFIG_TARGET_P2020RDB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PHYS_64BIT=y @@ -55,6 +56,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig index b6ae81dd425..1d33cf6750b 100644 --- a/configs/P2020RDB-PC_NAND_defconfig +++ b/configs/P2020RDB-PC_NAND_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P2020RDB=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -84,6 +85,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P2020RDB-PC_SDCARD_defconfig b/configs/P2020RDB-PC_SDCARD_defconfig index cfbb3c274ee..8d44e5b425c 100644 --- a/configs/P2020RDB-PC_SDCARD_defconfig +++ b/configs/P2020RDB-PC_SDCARD_defconfig @@ -17,6 +17,7 @@ CONFIG_TARGET_P2020RDB=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -75,6 +76,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P2020RDB-PC_SPIFLASH_defconfig b/configs/P2020RDB-PC_SPIFLASH_defconfig index 36c6c7e26e6..9155768c15c 100644 --- a/configs/P2020RDB-PC_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_SPIFLASH_defconfig @@ -19,6 +19,7 @@ CONFIG_TARGET_P2020RDB=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -77,6 +78,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P2020RDB-PC_defconfig b/configs/P2020RDB-PC_defconfig index 691df7cc21b..4f3be9eb242 100644 --- a/configs/P2020RDB-PC_defconfig +++ b/configs/P2020RDB-PC_defconfig @@ -12,6 +12,7 @@ CONFIG_TARGET_P2020RDB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_SYS_MONITOR_LEN=786432 @@ -54,6 +55,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eTSEC1" +CONFIG_USE_HOSTNAME=y +CONFIG_USE_ROOTPATH=y CONFIG_LBA48=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_SYS_SPD_BUS_NUM=1 diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig index f495205f5bd..bf3365a4800 100644 --- a/configs/P2041RDB_NAND_defconfig +++ b/configs/P2041RDB_NAND_defconfig @@ -15,6 +15,7 @@ CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -60,6 +61,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P2041RDB_SDCARD_defconfig b/configs/P2041RDB_SDCARD_defconfig index 23a7b66fbcb..69f30d427f7 100644 --- a/configs/P2041RDB_SDCARD_defconfig +++ b/configs/P2041RDB_SDCARD_defconfig @@ -15,6 +15,7 @@ CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -60,6 +61,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P2041RDB_SPIFLASH_defconfig b/configs/P2041RDB_SPIFLASH_defconfig index 7dfbde04693..c2dc0f21eeb 100644 --- a/configs/P2041RDB_SPIFLASH_defconfig +++ b/configs/P2041RDB_SPIFLASH_defconfig @@ -16,6 +16,7 @@ CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -62,6 +63,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/P2041RDB_defconfig b/configs/P2041RDB_defconfig index aea0b89f97d..306432e41b1 100644 --- a/configs/P2041RDB_defconfig +++ b/configs/P2041RDB_defconfig @@ -16,6 +16,7 @@ CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -57,6 +58,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T1024RDB_NAND_defconfig b/configs/T1024RDB_NAND_defconfig index e51db832637..bedea018ddc 100644 --- a/configs/T1024RDB_NAND_defconfig +++ b/configs/T1024RDB_NAND_defconfig @@ -18,6 +18,7 @@ CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -87,6 +88,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC4" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_CAAM=y CONFIG_SYS_FSL_DDR3=y CONFIG_DDR_ECC=y diff --git a/configs/T1024RDB_SDCARD_defconfig b/configs/T1024RDB_SDCARD_defconfig index 5472cccff8f..f06bb02a27c 100644 --- a/configs/T1024RDB_SDCARD_defconfig +++ b/configs/T1024RDB_SDCARD_defconfig @@ -18,6 +18,7 @@ CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -86,6 +87,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC4" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_CAAM=y CONFIG_SYS_FSL_DDR3=y CONFIG_DDR_ECC=y diff --git a/configs/T1024RDB_SPIFLASH_defconfig b/configs/T1024RDB_SPIFLASH_defconfig index 0dd725128c5..4f91dce1094 100644 --- a/configs/T1024RDB_SPIFLASH_defconfig +++ b/configs/T1024RDB_SPIFLASH_defconfig @@ -20,6 +20,7 @@ CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -89,6 +90,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC4" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_CAAM=y CONFIG_SYS_FSL_DDR3=y CONFIG_DDR_ECC=y diff --git a/configs/T1024RDB_defconfig b/configs/T1024RDB_defconfig index 8a2096c56d9..c9d771e44bf 100644 --- a/configs/T1024RDB_defconfig +++ b/configs/T1024RDB_defconfig @@ -12,6 +12,7 @@ CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -61,6 +62,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC4" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_CAAM=y CONFIG_SYS_FSL_DDR3=y CONFIG_DDR_ECC=y diff --git a/configs/T1042D4RDB_NAND_defconfig b/configs/T1042D4RDB_NAND_defconfig index cc6a80447c0..a55797eb9e4 100644 --- a/configs/T1042D4RDB_NAND_defconfig +++ b/configs/T1042D4RDB_NAND_defconfig @@ -17,6 +17,7 @@ CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -80,6 +81,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC4" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=2 diff --git a/configs/T1042D4RDB_SDCARD_defconfig b/configs/T1042D4RDB_SDCARD_defconfig index cb270adc37f..2f5a1a329d0 100644 --- a/configs/T1042D4RDB_SDCARD_defconfig +++ b/configs/T1042D4RDB_SDCARD_defconfig @@ -17,6 +17,7 @@ CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -79,6 +80,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC4" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=2 diff --git a/configs/T1042D4RDB_SPIFLASH_defconfig b/configs/T1042D4RDB_SPIFLASH_defconfig index 79530eac8fd..afce81b1076 100644 --- a/configs/T1042D4RDB_SPIFLASH_defconfig +++ b/configs/T1042D4RDB_SPIFLASH_defconfig @@ -19,6 +19,7 @@ CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -82,6 +83,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC4" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=2 diff --git a/configs/T1042D4RDB_defconfig b/configs/T1042D4RDB_defconfig index a671ae3d879..29b240fc147 100644 --- a/configs/T1042D4RDB_defconfig +++ b/configs/T1042D4RDB_defconfig @@ -11,6 +11,7 @@ CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -54,6 +55,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC4" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_CAAM=y CONFIG_DDR_CLK_FREQ=66666666 CONFIG_CHIP_SELECTS_PER_CTRL=2 diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig index 637842cda21..ca960d368bd 100644 --- a/configs/T2080QDS_NAND_defconfig +++ b/configs/T2080QDS_NAND_defconfig @@ -21,6 +21,7 @@ CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -89,6 +90,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T2080QDS_SDCARD_defconfig b/configs/T2080QDS_SDCARD_defconfig index 35ab9931e71..eba73ee989f 100644 --- a/configs/T2080QDS_SDCARD_defconfig +++ b/configs/T2080QDS_SDCARD_defconfig @@ -21,6 +21,7 @@ CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -88,6 +89,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T2080QDS_SECURE_BOOT_defconfig b/configs/T2080QDS_SECURE_BOOT_defconfig index 93b02a5e990..ae98a3586b7 100644 --- a/configs/T2080QDS_SECURE_BOOT_defconfig +++ b/configs/T2080QDS_SECURE_BOOT_defconfig @@ -13,6 +13,7 @@ CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y +CONFIG_USE_UBOOTPATH=y CONFIG_NXP_ESBC=y CONFIG_BOOTSCRIPT_HDR_ADDR=0xee020000 CONFIG_PCIE1=y @@ -63,6 +64,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_DYNAMIC_DDR_CLK_FREQ=y diff --git a/configs/T2080QDS_SPIFLASH_defconfig b/configs/T2080QDS_SPIFLASH_defconfig index 7d25bbbb0ba..76a1e583007 100644 --- a/configs/T2080QDS_SPIFLASH_defconfig +++ b/configs/T2080QDS_SPIFLASH_defconfig @@ -23,6 +23,7 @@ CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -91,6 +92,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig index 2846f63d47f..fe440a469f9 100644 --- a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig +++ b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig @@ -15,6 +15,7 @@ CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SRIO_PCIE_BOOT_SLAVE=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -60,6 +61,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig index a7dc88c0bf9..f4f90d5ab22 100644 --- a/configs/T2080QDS_defconfig +++ b/configs/T2080QDS_defconfig @@ -15,6 +15,7 @@ CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -63,6 +64,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig index a881488dbea..18baf568121 100644 --- a/configs/T2080RDB_NAND_defconfig +++ b/configs/T2080RDB_NAND_defconfig @@ -17,6 +17,7 @@ CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -85,6 +86,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T2080RDB_SDCARD_defconfig b/configs/T2080RDB_SDCARD_defconfig index 562a79955c4..df98e33f971 100644 --- a/configs/T2080RDB_SDCARD_defconfig +++ b/configs/T2080RDB_SDCARD_defconfig @@ -17,6 +17,7 @@ CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -84,6 +85,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T2080RDB_SPIFLASH_defconfig b/configs/T2080RDB_SPIFLASH_defconfig index 00018033a35..efa48af3bf8 100644 --- a/configs/T2080RDB_SPIFLASH_defconfig +++ b/configs/T2080RDB_SPIFLASH_defconfig @@ -19,6 +19,7 @@ CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -87,6 +88,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T2080RDB_defconfig b/configs/T2080RDB_defconfig index 0cb359de947..8e07b2a09c1 100644 --- a/configs/T2080RDB_defconfig +++ b/configs/T2080RDB_defconfig @@ -11,6 +11,7 @@ CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -59,6 +60,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T2080RDB_revD_NAND_defconfig b/configs/T2080RDB_revD_NAND_defconfig index cbe1bb4e3f6..69bebfacb07 100644 --- a/configs/T2080RDB_revD_NAND_defconfig +++ b/configs/T2080RDB_revD_NAND_defconfig @@ -18,6 +18,7 @@ CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y CONFIG_T2080RDB_REV_D=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -86,6 +87,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T2080RDB_revD_SDCARD_defconfig b/configs/T2080RDB_revD_SDCARD_defconfig index 80a2c003e6a..179fc63705a 100644 --- a/configs/T2080RDB_revD_SDCARD_defconfig +++ b/configs/T2080RDB_revD_SDCARD_defconfig @@ -18,6 +18,7 @@ CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_T2080RDB_REV_D=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -85,6 +86,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T2080RDB_revD_SPIFLASH_defconfig b/configs/T2080RDB_revD_SPIFLASH_defconfig index 99bee8e5ead..1d8a6b5f41c 100644 --- a/configs/T2080RDB_revD_SPIFLASH_defconfig +++ b/configs/T2080RDB_revD_SPIFLASH_defconfig @@ -20,6 +20,7 @@ CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_T2080RDB_REV_D=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -88,6 +89,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T2080RDB_revD_defconfig b/configs/T2080RDB_revD_defconfig index aa6a053209e..a1332a99b43 100644 --- a/configs/T2080RDB_revD_defconfig +++ b/configs/T2080RDB_revD_defconfig @@ -12,6 +12,7 @@ CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_T2080RDB_REV_D=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -60,6 +61,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC3" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T4240RDB_SDCARD_defconfig b/configs/T4240RDB_SDCARD_defconfig index b445b6bde1f..d906035a2bf 100644 --- a/configs/T4240RDB_SDCARD_defconfig +++ b/configs/T4240RDB_SDCARD_defconfig @@ -17,6 +17,7 @@ CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -78,6 +79,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/T4240RDB_defconfig b/configs/T4240RDB_defconfig index a807ac83474..d2b270dd44f 100644 --- a/configs/T4240RDB_defconfig +++ b/configs/T4240RDB_defconfig @@ -11,6 +11,7 @@ CONFIG_MPC85XX_HAVE_RESET_VECTOR=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_BOOK3E_HV=y CONFIG_SYS_CACHE_STASHING=y +CONFIG_USE_UBOOTPATH=y CONFIG_PCIE1=y CONFIG_PCIE2=y CONFIG_PCIE3=y @@ -53,6 +54,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FM1@DTSEC1" +CONFIG_USE_ROOTPATH=y CONFIG_FSL_SATA_V2=y CONFIG_SYS_SATA_MAX_DEVICE=2 CONFIG_FSL_CAAM=y diff --git a/configs/amcore_defconfig b/configs/amcore_defconfig index cebb79f733c..6775379428f 100644 --- a/configs/amcore_defconfig +++ b/configs/amcore_defconfig @@ -31,6 +31,8 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_TIMER=y CONFIG_CMD_DIAG=y CONFIG_ENV_IS_IN_FLASH=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="AMCORE" # CONFIG_NET is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y diff --git a/configs/apalis-imx8_defconfig b/configs/apalis-imx8_defconfig index 6226d50c8ac..395202bc29f 100644 --- a/configs/apalis-imx8_defconfig +++ b/configs/apalis-imx8_defconfig @@ -48,6 +48,12 @@ CONFIG_VERSION_VARIABLE=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=4096 CONFIG_TFTP_TSIZE=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.10.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.10.1" CONFIG_CLK_IMX8=y CONFIG_CPU=y CONFIG_MXC_GPIO=y diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig index 70ef62a778b..54b781b9c95 100644 --- a/configs/apalis-tk1_defconfig +++ b/configs/apalis-tk1_defconfig @@ -54,6 +54,12 @@ CONFIG_VERSION_VARIABLE=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=16352 CONFIG_TFTP_TSIZE=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.10.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.10.1" CONFIG_SPL_DM=y CONFIG_SYS_I2C_TEGRA=y CONFIG_SUPPORT_EMMC_BOOT=y diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index 68655cf15bf..28fc03d85ae 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -79,6 +79,12 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_VERSION_VARIABLE=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=4096 +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.10.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.10.1" CONFIG_BOUNCE_BUFFER=y CONFIG_DWC_AHSATA=y CONFIG_LBA48=y diff --git a/configs/aristainetos2c_defconfig b/configs/aristainetos2c_defconfig index 4c7ded9d22f..d7ac1301798 100644 --- a/configs/aristainetos2c_defconfig +++ b/configs/aristainetos2c_defconfig @@ -68,6 +68,8 @@ CONFIG_ENV_WRITEABLE_LIST=y CONFIG_ENV_ACCESS_IGNORE_FORCE=y CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FEC" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="aristainetos2" CONFIG_VERSION_VARIABLE=y CONFIG_ARP_TIMEOUT=200 CONFIG_BOUNCE_BUFFER=y diff --git a/configs/aristainetos2ccslb_defconfig b/configs/aristainetos2ccslb_defconfig index a23c77af897..562eb104537 100644 --- a/configs/aristainetos2ccslb_defconfig +++ b/configs/aristainetos2ccslb_defconfig @@ -68,6 +68,8 @@ CONFIG_ENV_WRITEABLE_LIST=y CONFIG_ENV_ACCESS_IGNORE_FORCE=y CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FEC" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="aristainetos2" CONFIG_VERSION_VARIABLE=y CONFIG_ARP_TIMEOUT=200 CONFIG_BOUNCE_BUFFER=y diff --git a/configs/bayleybay_defconfig b/configs/bayleybay_defconfig index 503cee91a29..14d435076da 100644 --- a/configs/bayleybay_defconfig +++ b/configs/bayleybay_defconfig @@ -53,6 +53,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_LBA48=y diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig index 4928a203d0d..956e797e43f 100644 --- a/configs/bcm_ns3_defconfig +++ b/configs/bcm_ns3_defconfig @@ -41,6 +41,8 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y # CONFIG_DOS_PARTITION is not set CONFIG_OF_CONTROL=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="NS3" CONFIG_CLK=y CONFIG_CLK_CCF=y CONFIG_SUPPORT_EMMC_BOOT=y diff --git a/configs/cherryhill_defconfig b/configs/cherryhill_defconfig index 321121e3f72..83d5712e616 100644 --- a/configs/cherryhill_defconfig +++ b/configs/cherryhill_defconfig @@ -43,6 +43,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set diff --git a/configs/chromebook_coral_defconfig b/configs/chromebook_coral_defconfig index a38b3b78c08..401506e2193 100644 --- a/configs/chromebook_coral_defconfig +++ b/configs/chromebook_coral_defconfig @@ -84,6 +84,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_SPL_OF_TRANSLATE=y diff --git a/configs/chromebook_link64_defconfig b/configs/chromebook_link64_defconfig index 570c4e82a47..64ebef4b500 100644 --- a/configs/chromebook_link64_defconfig +++ b/configs/chromebook_link64_defconfig @@ -67,6 +67,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set diff --git a/configs/chromebook_link_defconfig b/configs/chromebook_link_defconfig index 43cf53045b4..3098857d6e1 100644 --- a/configs/chromebook_link_defconfig +++ b/configs/chromebook_link_defconfig @@ -57,6 +57,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set diff --git a/configs/chromebook_samus_defconfig b/configs/chromebook_samus_defconfig index aa3d6f2b9d1..b933a2352e3 100644 --- a/configs/chromebook_samus_defconfig +++ b/configs/chromebook_samus_defconfig @@ -59,6 +59,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set diff --git a/configs/chromebox_panther_defconfig b/configs/chromebox_panther_defconfig index e83f2dfe7f3..96c739cbfbc 100644 --- a/configs/chromebox_panther_defconfig +++ b/configs/chromebox_panther_defconfig @@ -51,6 +51,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_LBA48=y diff --git a/configs/cobra5272_defconfig b/configs/cobra5272_defconfig index 2fdb882dc4e..377781f0bc9 100644 --- a/configs/cobra5272_defconfig +++ b/configs/cobra5272_defconfig @@ -25,6 +25,10 @@ CONFIG_BOOTP_BOOTFILESIZE=y CONFIG_CMD_PING=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.100.2" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.100.1" CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_SYS_BR0_PRELIM_BOOL=y CONFIG_SYS_BR0_PRELIM=0xFFE00201 diff --git a/configs/colibri-imx6ull-emmc_defconfig b/configs/colibri-imx6ull-emmc_defconfig index c0248dca953..b4de88aeadf 100644 --- a/configs/colibri-imx6ull-emmc_defconfig +++ b/configs/colibri-imx6ull-emmc_defconfig @@ -54,6 +54,12 @@ CONFIG_VERSION_VARIABLE=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=16352 CONFIG_TFTP_TSIZE=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.10.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.10.1" CONFIG_BOUNCE_BUFFER=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_ENV=y diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig index d16b66df7c8..f2a0d79ccca 100644 --- a/configs/colibri-imx6ull_defconfig +++ b/configs/colibri-imx6ull_defconfig @@ -63,6 +63,12 @@ CONFIG_VERSION_VARIABLE=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=16352 CONFIG_TFTP_TSIZE=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.10.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.10.1" CONFIG_BOUNCE_BUFFER=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_ENV=y diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig index 6896236045b..e4c418958b2 100644 --- a/configs/colibri-imx8x_defconfig +++ b/configs/colibri-imx8x_defconfig @@ -47,6 +47,12 @@ CONFIG_VERSION_VARIABLE=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=4096 CONFIG_TFTP_TSIZE=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.10.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.10.1" CONFIG_CLK_IMX8=y CONFIG_CPU=y CONFIG_FXL6408_GPIO=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index aa24dea1f04..bad7b8a54ee 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -79,6 +79,12 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_VERSION_VARIABLE=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=16352 +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.10.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.10.1" CONFIG_BOUNCE_BUFFER=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_ENV=y diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig index 4428b555036..7e24dcd4009 100644 --- a/configs/colibri_imx7_defconfig +++ b/configs/colibri_imx7_defconfig @@ -61,6 +61,12 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=16352 +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.10.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.10.1" CONFIG_BOUNCE_BUFFER=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_ENV=y diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig index bc9abc82d51..fe785d7e319 100644 --- a/configs/colibri_imx7_emmc_defconfig +++ b/configs/colibri_imx7_emmc_defconfig @@ -52,6 +52,12 @@ CONFIG_SYS_MMC_ENV_PART=1 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=16352 +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.10.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.10.1" CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_ENV=y CONFIG_USB_FUNCTION_FASTBOOT=y diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig index 3352b8e9235..2642e8975b5 100644 --- a/configs/colibri_vf_defconfig +++ b/configs/colibri_vf_defconfig @@ -66,6 +66,12 @@ CONFIG_ENV_RANGE=0x80000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_VERSION_VARIABLE=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.10.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.10.1" CONFIG_DFU_NAND=y CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000 CONFIG_VYBRID_GPIO=y diff --git a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig index 15b7f27ae69..3a84190bbfd 100644 --- a/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig +++ b/configs/conga-qeval20-qa3-e3845-internal-uart_defconfig @@ -60,6 +60,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_LBA48=y diff --git a/configs/conga-qeval20-qa3-e3845_defconfig b/configs/conga-qeval20-qa3-e3845_defconfig index 8a1defd0438..bb8b9ef312a 100644 --- a/configs/conga-qeval20-qa3-e3845_defconfig +++ b/configs/conga-qeval20-qa3-e3845_defconfig @@ -56,6 +56,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_LBA48=y diff --git a/configs/controlcenterdc_defconfig b/configs/controlcenterdc_defconfig index e8fb032bbae..ffa48fcb93f 100644 --- a/configs/controlcenterdc_defconfig +++ b/configs/controlcenterdc_defconfig @@ -66,8 +66,11 @@ CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="ccdc.img" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="ccdc" CONFIG_ARP_TIMEOUT=200 CONFIG_NET_RETRY_COUNT=50 +CONFIG_USE_ROOTPATH=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_SCSI_AHCI=y CONFIG_DM_PCA953X=y diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig index e4da59bae92..ec672e59e89 100644 --- a/configs/coreboot64_defconfig +++ b/configs/coreboot64_defconfig @@ -50,6 +50,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set diff --git a/configs/coreboot_defconfig b/configs/coreboot_defconfig index e297494663e..4db72899169 100644 --- a/configs/coreboot_defconfig +++ b/configs/coreboot_defconfig @@ -44,6 +44,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set diff --git a/configs/cougarcanyon2_defconfig b/configs/cougarcanyon2_defconfig index 8b47f2d89f8..8e53eec74e5 100644 --- a/configs/cougarcanyon2_defconfig +++ b/configs/cougarcanyon2_defconfig @@ -47,6 +47,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_LBA48=y diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig index 038cbbe5b99..69ad017f987 100644 --- a/configs/crownbay_defconfig +++ b/configs/crownbay_defconfig @@ -50,6 +50,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set diff --git a/configs/dfi-bt700-q7x-151_defconfig b/configs/dfi-bt700-q7x-151_defconfig index 63b8c8f92da..bd8b2e1155d 100644 --- a/configs/dfi-bt700-q7x-151_defconfig +++ b/configs/dfi-bt700-q7x-151_defconfig @@ -54,6 +54,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_LBA48=y diff --git a/configs/draco_defconfig b/configs/draco_defconfig index cc1fb489eb1..8d1c6fd44a7 100644 --- a/configs/draco_defconfig +++ b/configs/draco_defconfig @@ -84,6 +84,8 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RETRY_COUNT=10 CONFIG_BOOTP_SEND_HOSTNAME=y +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/opt/eldk" CONFIG_SPL_DM=y # CONFIG_SPL_BLK is not set CONFIG_BOOTCOUNT_LIMIT=y diff --git a/configs/efi-x86_app32_defconfig b/configs/efi-x86_app32_defconfig index 4ae74dbd2e3..905f375a3ef 100644 --- a/configs/efi-x86_app32_defconfig +++ b/configs/efi-x86_app32_defconfig @@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_REGEX is not set diff --git a/configs/efi-x86_app64_defconfig b/configs/efi-x86_app64_defconfig index 3f1e80120c6..605d49ff8cb 100644 --- a/configs/efi-x86_app64_defconfig +++ b/configs/efi-x86_app64_defconfig @@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_REGEX is not set diff --git a/configs/efi-x86_payload32_defconfig b/configs/efi-x86_payload32_defconfig index 8d1fc22eb93..a5c629b46f3 100644 --- a/configs/efi-x86_payload32_defconfig +++ b/configs/efi-x86_payload32_defconfig @@ -41,6 +41,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set diff --git a/configs/efi-x86_payload64_defconfig b/configs/efi-x86_payload64_defconfig index 89e6d1febc8..5cde04a5ac9 100644 --- a/configs/efi-x86_payload64_defconfig +++ b/configs/efi-x86_payload64_defconfig @@ -41,6 +41,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig index ee731f3c0a1..d42eda2055a 100644 --- a/configs/etamin_defconfig +++ b/configs/etamin_defconfig @@ -85,6 +85,8 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RETRY_COUNT=10 CONFIG_BOOTP_SEND_HOSTNAME=y +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/opt/eldk" CONFIG_SPL_DM=y # CONFIG_SPL_BLK is not set CONFIG_BOOTCOUNT_LIMIT=y diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig index 141467bbe35..0d2ebdab926 100644 --- a/configs/galileo_defconfig +++ b/configs/galileo_defconfig @@ -46,6 +46,7 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_NET_RANDOM_ETHADDR=y CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_CPU=y diff --git a/configs/gazerbeam_defconfig b/configs/gazerbeam_defconfig index a852b96d4ef..9d09d9c37f2 100644 --- a/configs/gazerbeam_defconfig +++ b/configs/gazerbeam_defconfig @@ -162,6 +162,9 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR_REDUND=0xFE090000 CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="gazerbeam" +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_AXI=y CONFIG_IHS_AXI=y diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index f999b447755..5308a8e3e97 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -97,6 +97,10 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=1 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_NETCONSOLE=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.1" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.146" CONFIG_BOUNCE_BUFFER=y CONFIG_DWC_AHSATA=y CONFIG_LBA48=y diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index 4c6291f0c51..37fc1e51430 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -97,6 +97,10 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=1 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_NETCONSOLE=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.1" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.146" CONFIG_BOUNCE_BUFFER=y CONFIG_DWC_AHSATA=y CONFIG_LBA48=y diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index 4e062e477e8..f33625b2ca0 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -100,6 +100,10 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_NETCONSOLE=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.1" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.146" CONFIG_BOUNCE_BUFFER=y CONFIG_DWC_AHSATA=y CONFIG_LBA48=y diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig index 48be3c5f4a6..b29c62fc59b 100644 --- a/configs/imx28_xea_defconfig +++ b/configs/imx28_xea_defconfig @@ -83,6 +83,8 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="xea" CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_DEVRES=y diff --git a/configs/imx28_xea_sb_defconfig b/configs/imx28_xea_sb_defconfig index 26227341d9f..b7edd3bae48 100644 --- a/configs/imx28_xea_sb_defconfig +++ b/configs/imx28_xea_sb_defconfig @@ -63,6 +63,8 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="xea" CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_DEVRES=y diff --git a/configs/integratorcp_cm1136_defconfig b/configs/integratorcp_cm1136_defconfig index 7417b53e86f..6d9d0e8999b 100644 --- a/configs/integratorcp_cm1136_defconfig +++ b/configs/integratorcp_cm1136_defconfig @@ -31,6 +31,10 @@ CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_SETEXPR is not set CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.104" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.100" # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y diff --git a/configs/integratorcp_cm920t_defconfig b/configs/integratorcp_cm920t_defconfig index 36b71fc4019..2d40a5f9374 100644 --- a/configs/integratorcp_cm920t_defconfig +++ b/configs/integratorcp_cm920t_defconfig @@ -31,6 +31,10 @@ CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_SETEXPR is not set CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.104" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.100" # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y diff --git a/configs/integratorcp_cm926ejs_defconfig b/configs/integratorcp_cm926ejs_defconfig index 947d21ef35e..4505123d4f2 100644 --- a/configs/integratorcp_cm926ejs_defconfig +++ b/configs/integratorcp_cm926ejs_defconfig @@ -31,6 +31,10 @@ CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_SETEXPR is not set CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.104" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.100" # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y diff --git a/configs/integratorcp_cm946es_defconfig b/configs/integratorcp_cm946es_defconfig index 630fe0d813d..bbdf86baebd 100644 --- a/configs/integratorcp_cm946es_defconfig +++ b/configs/integratorcp_cm946es_defconfig @@ -31,6 +31,10 @@ CONFIG_CMD_ARMFLASH=y # CONFIG_CMD_SETEXPR is not set CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.104" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.100" # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y diff --git a/configs/kontron-sl-mx6ul_defconfig b/configs/kontron-sl-mx6ul_defconfig index 7391e597642..02b963e7c33 100644 --- a/configs/kontron-sl-mx6ul_defconfig +++ b/configs/kontron-sl-mx6ul_defconfig @@ -66,6 +66,8 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eth0" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="kontron-mx6ul" CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_ENV=y CONFIG_DM_I2C=y diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig index 62fd984debd..4b54813415d 100644 --- a/configs/kontron-sl-mx8mm_defconfig +++ b/configs/kontron-sl-mx8mm_defconfig @@ -77,6 +77,8 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="kontron-mx8mm" CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig index e332de2aa9e..b70d10433d7 100644 --- a/configs/m53menlo_defconfig +++ b/configs/m53menlo_defconfig @@ -75,6 +75,8 @@ CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="boot/fitImage" CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="FEC0" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="m53menlo" CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_MAGIC=0x0B01C041 diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig index 186521aac6c..be349418050 100644 --- a/configs/microblaze-generic_defconfig +++ b/configs/microblaze-generic_defconfig @@ -53,6 +53,8 @@ CONFIG_CMD_JFFS2=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="microblaze-generic" CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y diff --git a/configs/minnowmax_defconfig b/configs/minnowmax_defconfig index e8ef832f898..679b6e3de53 100644 --- a/configs/minnowmax_defconfig +++ b/configs/minnowmax_defconfig @@ -59,6 +59,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_LBA48=y diff --git a/configs/mt7622_rfb_defconfig b/configs/mt7622_rfb_defconfig index 3f18addd5a0..c09c2221a54 100644 --- a/configs/mt7622_rfb_defconfig +++ b/configs/mt7622_rfb_defconfig @@ -26,6 +26,10 @@ CONFIG_CMD_SMC=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.1" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.3" CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_CLK=y diff --git a/configs/mt7623a_unielec_u7623_02_defconfig b/configs/mt7623a_unielec_u7623_02_defconfig index c56b4bb82fe..8dd65d57e3d 100644 --- a/configs/mt7623a_unielec_u7623_02_defconfig +++ b/configs/mt7623a_unielec_u7623_02_defconfig @@ -35,6 +35,10 @@ CONFIG_CMD_READ=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.1" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.2" CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_CLK=y diff --git a/configs/mt7623n_bpir2_defconfig b/configs/mt7623n_bpir2_defconfig index e36943b0fc8..cafac4278b3 100644 --- a/configs/mt7623n_bpir2_defconfig +++ b/configs/mt7623n_bpir2_defconfig @@ -36,6 +36,10 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.1" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.2" CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_CLK=y diff --git a/configs/mt7629_rfb_defconfig b/configs/mt7629_rfb_defconfig index d7669d55779..76fd135d93c 100644 --- a/configs/mt7629_rfb_defconfig +++ b/configs/mt7629_rfb_defconfig @@ -57,6 +57,10 @@ CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.1.1" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.2" CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_REGMAP=y CONFIG_SPL_REGMAP=y diff --git a/configs/mvebu_ac5_rd_defconfig b/configs/mvebu_ac5_rd_defconfig index 9235a398c55..a27202eb23e 100644 --- a/configs/mvebu_ac5_rd_defconfig +++ b/configs/mvebu_ac5_rd_defconfig @@ -43,6 +43,16 @@ CONFIG_CMD_UBI=y CONFIG_MAC_PARTITION=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="0.0.0.0" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="0.0.0.0" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/srv/nfs/" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="0.0.0.0" CONFIG_CLK=y CONFIG_CLK_MVEBU=y CONFIG_DM_PCA953X=y diff --git a/configs/novena_defconfig b/configs/novena_defconfig index 3999ae1c829..cc74abfcd7c 100644 --- a/configs/novena_defconfig +++ b/configs/novena_defconfig @@ -59,6 +59,8 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="fitImage" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="novena" CONFIG_VERSION_VARIABLE=y CONFIG_NETCONSOLE=y CONFIG_BOUNCE_BUFFER=y diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig index cdb246fc644..867b89d3fed 100644 --- a/configs/opos6uldev_defconfig +++ b/configs/opos6uldev_defconfig @@ -77,6 +77,8 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=1 CONFIG_VERSION_VARIABLE=y CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/tftpboot/opos6ul-root" CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_BOUNCE_BUFFER=y diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig index b57e588f4e9..b7c0b0d1e8e 100644 --- a/configs/pg_wcom_expu1_defconfig +++ b/configs/pg_wcom_expu1_defconfig @@ -70,6 +70,8 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR_REDUND=0x60040000 CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="ethernet@2d90000" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="EXPU1" CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_BE=y diff --git a/configs/pg_wcom_expu1_update_defconfig b/configs/pg_wcom_expu1_update_defconfig index 9029e7babc8..a5193cb463e 100644 --- a/configs/pg_wcom_expu1_update_defconfig +++ b/configs/pg_wcom_expu1_update_defconfig @@ -68,6 +68,8 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR_REDUND=0x60200000 CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="ethernet@2d90000" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="EXPU1" CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_BE=y diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig index aa74e1746ab..1b9e0b6c913 100644 --- a/configs/pg_wcom_seli8_defconfig +++ b/configs/pg_wcom_seli8_defconfig @@ -70,6 +70,8 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR_REDUND=0x60040000 CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="ethernet@2d90000" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="SELI8" CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_BE=y diff --git a/configs/pg_wcom_seli8_update_defconfig b/configs/pg_wcom_seli8_update_defconfig index 2b18a88d44f..c193f7bb406 100644 --- a/configs/pg_wcom_seli8_update_defconfig +++ b/configs/pg_wcom_seli8_update_defconfig @@ -68,6 +68,8 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_ENV_ADDR_REDUND=0x60200000 CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="ethernet@2d90000" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="SELI8" CONFIG_VERSION_VARIABLE=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_BE=y diff --git a/configs/poleg_evb_defconfig b/configs/poleg_evb_defconfig index 914fc39a7e3..b7e39eb31fc 100644 --- a/configs/poleg_evb_defconfig +++ b/configs/poleg_evb_defconfig @@ -28,6 +28,12 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_UUID=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.0.2" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.0.1" CONFIG_CLK=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig index 6b361f82116..e655b18f027 100644 --- a/configs/pxm2_defconfig +++ b/configs/pxm2_defconfig @@ -82,6 +82,8 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RETRY_COUNT=10 CONFIG_BOOTP_SEND_HOSTNAME=y +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/opt/eldk" CONFIG_SPL_DM=y # CONFIG_SPL_BLK is not set CONFIG_BOOTCOUNT_LIMIT=y diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig index cdad1b09950..a19d555f7d5 100644 --- a/configs/qemu-ppce500_defconfig +++ b/configs/qemu-ppce500_defconfig @@ -8,6 +8,7 @@ CONFIG_MPC85xx=y CONFIG_TARGET_QEMU_PPCE500=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y +CONFIG_USE_UBOOTPATH=y CONFIG_SYS_MONITOR_LEN=524288 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -39,6 +40,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_USE_ROOTPATH=y CONFIG_SIMPLE_BUS_CORRECT_RANGE=y CONFIG_LBA48=y CONFIG_CHIP_SELECTS_PER_CTRL=0 diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index 0f4811e5d7a..9f1cb2675de 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -58,6 +58,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_SYS_IDE_MAXDEVICE=4 diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index a8222122fc9..04528ad7cd2 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -39,6 +39,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_SYS_IDE_MAXDEVICE=4 diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig index 861f0f59bc8..fe09c34d5b8 100644 --- a/configs/rastaban_defconfig +++ b/configs/rastaban_defconfig @@ -84,6 +84,8 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RETRY_COUNT=10 CONFIG_BOOTP_SEND_HOSTNAME=y +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/opt/eldk" CONFIG_SPL_DM=y # CONFIG_SPL_BLK is not set CONFIG_BOOTCOUNT_LIMIT=y diff --git a/configs/rut_defconfig b/configs/rut_defconfig index 30c5d4a5ad5..6c3ba4cc724 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -83,6 +83,8 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RETRY_COUNT=10 CONFIG_BOOTP_SEND_HOSTNAME=y +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/opt/eldk" CONFIG_SPL_DM=y # CONFIG_SPL_BLK is not set CONFIG_BOOTCOUNT_LIMIT=y diff --git a/configs/seeed_npi_imx6ull_defconfig b/configs/seeed_npi_imx6ull_defconfig index 34d23fdb842..abcd63c7ece 100644 --- a/configs/seeed_npi_imx6ull_defconfig +++ b/configs/seeed_npi_imx6ull_defconfig @@ -49,6 +49,8 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eth0" CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" CONFIG_FSL_USDHC=y CONFIG_MTD=y CONFIG_DM_MTD=y diff --git a/configs/slimbootloader_defconfig b/configs/slimbootloader_defconfig index f5d16f64d73..dbfed814ded 100644 --- a/configs/slimbootloader_defconfig +++ b/configs/slimbootloader_defconfig @@ -25,6 +25,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set diff --git a/configs/socfpga_vining_fpga_defconfig b/configs/socfpga_vining_fpga_defconfig index cdad36bbfd8..6d859b3274b 100644 --- a/configs/socfpga_vining_fpga_defconfig +++ b/configs/socfpga_vining_fpga_defconfig @@ -63,6 +63,8 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="fitImage" +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="socfpga_vining_fpga" CONFIG_VERSION_VARIABLE=y CONFIG_BOOTP_SEND_HOSTNAME=y CONFIG_NET_RANDOM_ETHADDR=y diff --git a/configs/som-db5800-som-6867_defconfig b/configs/som-db5800-som-6867_defconfig index a75ec667d51..c4752a2b0a5 100644 --- a/configs/som-db5800-som-6867_defconfig +++ b/configs/som-db5800-som-6867_defconfig @@ -54,6 +54,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_LBA48=y diff --git a/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig index df90e64cbbf..41074d50ff4 100644 --- a/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig +++ b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig @@ -58,6 +58,8 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_SPL_ENV_IS_NOWHERE is not set +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.1" CONFIG_DM_HWSPINLOCK=y CONFIG_HWSPINLOCK_STM32=y CONFIG_DM_I2C=y diff --git a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig index a242f1b1580..c9dbd485bcd 100644 --- a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig +++ b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig @@ -58,6 +58,8 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_SPL_ENV_IS_NOWHERE is not set +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.1" CONFIG_DM_HWSPINLOCK=y CONFIG_HWSPINLOCK_STM32=y CONFIG_DM_I2C=y diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig index 5f1fc901137..6f8293c7ee2 100644 --- a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig +++ b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig @@ -58,6 +58,8 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_SPL_ENV_IS_NOWHERE is not set +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.1" CONFIG_DM_HWSPINLOCK=y CONFIG_HWSPINLOCK_STM32=y CONFIG_DM_I2C=y diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig index 65d9b5a7294..a12a150f3b1 100644 --- a/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig +++ b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig @@ -58,6 +58,8 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_SPL_ENV_IS_NOWHERE is not set +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.1" CONFIG_DM_HWSPINLOCK=y CONFIG_HWSPINLOCK_STM32=y CONFIG_DM_I2C=y diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 86ebbef0a6c..2d4b7cbc7b6 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -94,6 +94,8 @@ CONFIG_SYS_MMC_ENV_DEV=-1 # CONFIG_SPL_ENV_IS_NOWHERE is not set # CONFIG_SPL_ENV_IS_IN_SPI_FLASH is not set CONFIG_TFTP_TSIZE=y +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.1" CONFIG_STM32_ADC=y CONFIG_SET_DFU_ALT_INFO=y CONFIG_USB_FUNCTION_FASTBOOT=y diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig index caa79e68834..22cf538b410 100644 --- a/configs/stm32mp15_defconfig +++ b/configs/stm32mp15_defconfig @@ -66,6 +66,8 @@ CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_DEV=-1 CONFIG_TFTP_TSIZE=y +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.1" CONFIG_STM32_ADC=y CONFIG_CLK_SCMI=y CONFIG_SET_DFU_ALT_INFO=y diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 26c2e73aa04..7db562c542e 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -106,6 +106,8 @@ CONFIG_VERSION_VARIABLE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_TSIZE=y +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.1" CONFIG_STM32_ADC=y CONFIG_SPL_BLOCK_CACHE=y CONFIG_BOOTCOUNT_LIMIT=y diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index f76e13eafd7..c94f03569f1 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -103,6 +103,8 @@ CONFIG_VERSION_VARIABLE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_TSIZE=y +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.1" CONFIG_STM32_ADC=y CONFIG_SPL_BLOCK_CACHE=y CONFIG_BOOTCOUNT_LIMIT=y diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig index 3309c2e7924..e00c00f3746 100644 --- a/configs/stm32mp15_trusted_defconfig +++ b/configs/stm32mp15_trusted_defconfig @@ -67,6 +67,8 @@ CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_DEV=-1 CONFIG_TFTP_TSIZE=y +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.1.1" CONFIG_STM32_ADC=y CONFIG_CLK_SCMI=y CONFIG_SET_DFU_ALT_INFO=y diff --git a/configs/stmark2_defconfig b/configs/stmark2_defconfig index 5ee2edcf5e4..ae7a9cf6da2 100644 --- a/configs/stmark2_defconfig +++ b/configs/stmark2_defconfig @@ -37,6 +37,8 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:1m(u-boot),7m(kernel),-(rootfs)" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_SPI_CS=1 CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="stmark2" # CONFIG_NET is not set CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y diff --git a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig index 205ac877482..74c4a4967d0 100644 --- a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig +++ b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig @@ -56,6 +56,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_LBA48=y diff --git a/configs/theadorable-x86-conga-qa3-e3845_defconfig b/configs/theadorable-x86-conga-qa3-e3845_defconfig index b6d59215e73..194b0519ea2 100644 --- a/configs/theadorable-x86-conga-qa3-e3845_defconfig +++ b/configs/theadorable-x86-conga-qa3-e3845_defconfig @@ -55,6 +55,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_LBA48=y diff --git a/configs/theadorable-x86-dfi-bt700_defconfig b/configs/theadorable-x86-dfi-bt700_defconfig index fea35cd915e..39c8a87fbee 100644 --- a/configs/theadorable-x86-dfi-bt700_defconfig +++ b/configs/theadorable-x86-dfi-bt700_defconfig @@ -53,6 +53,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="bzImage" CONFIG_TFTP_TSIZE=y +CONFIG_USE_ROOTPATH=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_LBA48=y diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig index aef524052bc..a9e37170f45 100644 --- a/configs/thuban_defconfig +++ b/configs/thuban_defconfig @@ -84,6 +84,8 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NET_RETRY_COUNT=10 CONFIG_BOOTP_SEND_HOSTNAME=y +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/opt/eldk" CONFIG_SPL_DM=y # CONFIG_SPL_BLK is not set CONFIG_BOOTCOUNT_LIMIT=y diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig index 5665cf38798..b361e3f4034 100644 --- a/configs/uniphier_ld4_sld8_defconfig +++ b/configs/uniphier_ld4_sld8_defconfig @@ -50,6 +50,16 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="zImage" CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.168.11.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.11.10" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/nfs/root/path" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.11.1" CONFIG_GPIO_UNIPHIER=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y diff --git a/configs/uniphier_v7_defconfig b/configs/uniphier_v7_defconfig index e3087a9109e..765d42a3e6c 100644 --- a/configs/uniphier_v7_defconfig +++ b/configs/uniphier_v7_defconfig @@ -51,6 +51,16 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="zImage" CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.168.11.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.11.10" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/nfs/root/path" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.11.1" CONFIG_GPIO_UNIPHIER=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig index 1b0e0d0da74..6a0e2666cf1 100644 --- a/configs/uniphier_v8_defconfig +++ b/configs/uniphier_v8_defconfig @@ -38,6 +38,16 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="Image" CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_USE_GATEWAYIP=y +CONFIG_GATEWAYIP="192.168.11.1" +CONFIG_USE_IPADDR=y +CONFIG_IPADDR="192.168.11.10" +CONFIG_USE_NETMASK=y +CONFIG_NETMASK="255.255.255.0" +CONFIG_USE_ROOTPATH=y +CONFIG_ROOTPATH="/nfs/root/path" +CONFIG_USE_SERVERIP=y +CONFIG_SERVERIP="192.168.11.1" CONFIG_GPIO_UNIPHIER=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y diff --git a/configs/usbarmory_defconfig b/configs/usbarmory_defconfig index ed2bcc69fc5..66c969f95e5 100644 --- a/configs/usbarmory_defconfig +++ b/configs/usbarmory_defconfig @@ -27,6 +27,8 @@ CONFIG_CMD_USB=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_HOSTNAME=y +CONFIG_HOSTNAME="usbarmory" CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MXC=y CONFIG_FSL_IIM=y diff --git a/env/Kconfig b/env/Kconfig index 4e506ae262b..c13a5b0d467 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -866,6 +866,16 @@ config ETHPRIME help The value to set the "ethprime" variable to. +config USE_HOSTNAME + bool "Set a default 'hostname' value in the environment" + default y if X86 + +config HOSTNAME + string "Value of the default 'hostname' value in the environment" + depends on USE_HOSTNAME + default "x86" if X86 + default "unknown" + config VERSION_VARIABLE bool "Add a 'ver' environment variable with the U-Boot version" help diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index b360238b332..e14650fe0d4 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -17,14 +17,6 @@ /* I2C */ -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* CONFIG_MCFFEC */ - -#define CONFIG_HOSTNAME "M5208EVBe" #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=40010000\0" \ diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index ed45eccb62c..220524bfaed 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -26,14 +26,7 @@ #define CFG_SYS_I2C_PINMUX_SET (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA) /* this must be included AFTER the definition of CONFIG COMMANDS (if any) */ -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* FEC_ENET */ -#define CONFIG_HOSTNAME "M5235EVB" #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=10000\0" \ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index ad55938348e..65a7aa04086 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -36,8 +36,6 @@ "" #endif -#define CONFIG_HOSTNAME "M5253DEMO" - /* I2C */ #define CFG_SYS_I2C_PINMUX_REG (*(u32 *) (CFG_SYS_MBAR+0x19C)) #define CFG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF) diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index a9339e50525..c58d19c810f 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -29,14 +29,6 @@ . = DEFINED(env_offset) ? env_offset : .; \ env/embedded.o(.text); -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* CONFIG_MCFFEC */ - -#define CONFIG_HOSTNAME "M5272C3" #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=10000\0" \ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index bde9e770e52..e23439fd782 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -29,14 +29,6 @@ . = DEFINED(env_offset) ? env_offset : .; \ env/embedded.o(.text*); -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* CONFIG_MCFFEC */ - -#define CONFIG_HOSTNAME "M5282EVB" #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=10000\0" \ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 439ed93a237..ac2bd0b2241 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -30,14 +30,6 @@ /* I2C */ -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* FEC_ENET */ - -#define CONFIG_HOSTNAME "M53017" #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=40010000\0" \ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 72f0c63a1e2..a86a117fd8f 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -22,14 +22,6 @@ /* I2C */ -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* FEC_ENET */ - -#define CONFIG_HOSTNAME "M5329EVB" #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=40010000\0" \ diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 4e8b54e01f4..b2ad03cc3cb 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -24,14 +24,6 @@ /* I2C */ -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* FEC_ENET */ - -#define CONFIG_HOSTNAME "M5373EVB" #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ diff --git a/include/configs/MCR3000.h b/include/configs/MCR3000.h index 232cf9e9984..f8368823aac 100644 --- a/include/configs/MCR3000.h +++ b/include/configs/MCR3000.h @@ -52,10 +52,6 @@ "${ofl_args}; " \ "bootm ${loadaddr} - 0xf00000\0" -#define CONFIG_IPADDR 192.168.0.3 -#define CONFIG_SERVERIP 192.168.0.1 -#define CONFIG_NETMASK 255.0.0.0 - /* Miscellaneous configurable options */ /* Definitions for initial stack pointer and data area (in DPRAM) */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index dbfcdfb738b..7dff3cc6913 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -197,10 +197,6 @@ #define CONFIG_NETDEV "eth1" -#define CONFIG_HOSTNAME "mpc837x_rdb" -#define CONFIG_ROOTPATH "/nfsroot" - /* U-Boot image on TFTP server */ -#define CONFIG_UBOOTPATH "u-boot.bin" #define CONFIG_FDTFILE "mpc8379_rdb.dtb" #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 34b876f829e..1f1eacdb691 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -298,20 +298,10 @@ * Environment Configuration */ -#define CONFIG_IPADDR 192.168.1.253 - -#define CONFIG_HOSTNAME "unknown" -#define CONFIG_ROOTPATH "/nfsroot" -#define CONFIG_UBOOTPATH 8548cds/u-boot.bin /* TFTP server */ - -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 - #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:ecc=off\0" \ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ "protect off " __stringify(CONFIG_TEXT_BASE) \ " +$filesize; " \ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index f79c62adba3..d83563d6181 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -380,13 +380,10 @@ extern unsigned long get_sdram_size(void); * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "loadaddr=1000000\0" \ "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 707157e4a9a..0f0cdb3a681 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -306,8 +306,6 @@ /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH u-boot.bin #define __USB_PHY_TYPE utmi @@ -315,7 +313,7 @@ "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ "bank_intlv=cs0_cs1\0" \ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ "protect off $ubootaddr +$filesize && " \ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index b590f127392..e815d9f81a1 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -421,8 +421,6 @@ /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #define __USB_PHY_TYPE utmi #ifdef CONFIG_ARCH_T1024 @@ -441,7 +439,7 @@ ARCH_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \ "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ "netdev=eth0\0" \ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 9d805f446b4..6fe0bd68280 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -411,8 +411,6 @@ /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ #define __USB_PHY_TYPE utmi #define RAMDISKFILE "t104xrdb/ramdisk.uboot" @@ -434,7 +432,7 @@ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ "protect off $ubootaddr +$filesize && " \ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 804b7ec4c1c..79b3d7af4ea 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -419,8 +419,6 @@ /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ #define __USB_PHY_TYPE utmi @@ -430,7 +428,7 @@ "bank_intlv=auto;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ "protect off $ubootaddr +$filesize && " \ diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index d8213b4662f..2a32fe37aa9 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -385,8 +385,6 @@ /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ #define __USB_PHY_TYPE utmi @@ -396,7 +394,7 @@ "bank_intlv=auto;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ "protect off $ubootaddr +$filesize && " \ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 958933689d3..d8c4de5b3d7 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -138,8 +138,6 @@ /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ #define HVBOOT \ "setenv bootargs config-addr=0x60000000; " \ @@ -386,7 +384,7 @@ "bank_intlv=auto;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ "protect off $ubootaddr +$filesize && " \ diff --git a/include/configs/amcore.h b/include/configs/amcore.h index ee0be972d24..ca29346fe64 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -8,8 +8,6 @@ #ifndef __AMCORE_CONFIG_H #define __AMCORE_CONFIG_H -#define CONFIG_HOSTNAME "AMCORE" - #define CFG_SYS_UART_PORT 0 #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h index cf23837863b..aa3dcf4a881 100644 --- a/include/configs/apalis-imx8.h +++ b/include/configs/apalis-imx8.h @@ -14,9 +14,6 @@ #define USDHC2_BASE_ADDR 0x5b020000 /* Networking */ -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.10.1 #define MEM_LAYOUT_ENV_SETTINGS \ "fdt_addr_r=0x84000000\0" \ diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index f0a02ae1795..1d478078b2c 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -33,12 +33,6 @@ func(PXE, pxe, na) \ func(DHCP, dhcp, na) -#undef CONFIG_IPADDR -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#undef CONFIG_SERVERIP -#define CONFIG_SERVERIP 192.168.10.1 - #define DFU_ALT_EMMC_INFO "apalis-tk1.img raw 0x0 0x500 mmcpart 1; " \ "boot part 0 1 mmcpart 0; " \ "rootfs part 0 2 mmcpart 0; " \ diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index a3c86545f07..25a84458f55 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -35,12 +35,6 @@ /* Command definition */ -#undef CONFIG_IPADDR -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#undef CONFIG_SERVERIP -#define CONFIG_SERVERIP 192.168.10.1 - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) \ diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index 6faf544d21b..85413545715 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -11,8 +11,6 @@ #ifndef __ARISTAINETOS2_CONFIG_H #define __ARISTAINETOS2_CONFIG_H -#define CONFIG_HOSTNAME "aristainetos2" - #if (CONFIG_SYS_BOARD_VERSION == 5) #define CONSOLE_DEV "ttymxc1" #elif (CONFIG_SYS_BOARD_VERSION == 6) diff --git a/include/configs/bcm_ns3.h b/include/configs/bcm_ns3.h index b5469880fe2..fc176dc2014 100644 --- a/include/configs/bcm_ns3.h +++ b/include/configs/bcm_ns3.h @@ -9,8 +9,6 @@ #include -#define CONFIG_HOSTNAME "NS3" - /* Physical Memory Map */ #define V2M_BASE 0x80000000 #define PHYS_SDRAM_1 V2M_BASE diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 6d6e2fc6962..8c83c3ac06a 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -91,9 +91,6 @@ enter a valid image address in flash */ /* User network settings */ -#define CONFIG_IPADDR 192.168.100.2 /* default board IP address */ -#define CONFIG_SERVERIP 192.168.100.1 /* default tftp server IP address */ - #endif /*---*/ diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index c0c3b4e0359..2f09a264cbe 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -20,10 +20,6 @@ #define CFG_SYS_FSL_ESDHC_ADDR 0 #define CFG_SYS_FSL_USDHC_NUM 1 -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.10.1 - #if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_EMMC) #define UBOOT_UPDATE \ "uboot_hwpart=1\0" \ diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index 6002d8d5c9f..215c633a4c9 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -14,10 +14,6 @@ #define USDHC1_BASE_ADDR 0x5b010000 #define USDHC2_BASE_ADDR 0x5b020000 -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.10.1 - #define MEM_LAYOUT_ENV_SETTINGS \ "fdt_addr_r=0x83000000\0" \ "kernel_addr_r=0x81000000\0" \ diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 60a3862a4d1..19daad21cb5 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -30,12 +30,6 @@ /* Command definition */ -#undef CONFIG_IPADDR -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#undef CONFIG_SERVERIP -#define CONFIG_SERVERIP 192.168.10.1 - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 0) \ diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 32a79b02554..48c3f015473 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -21,10 +21,6 @@ #define CFG_SYS_FSL_USDHC_NUM 2 #endif -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.10.1 - #if defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC) #define UBOOT_UPDATE \ "uboot_hwpart=1\0" \ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index fa778ec9e2b..8a790400b46 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -16,10 +16,6 @@ /* NAND support */ -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.10.1 - #define CONFIG_FDTADDR 0x84000000 #define MEM_LAYOUT_ENV_SETTINGS \ diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index 5da2778b67b..119a834fe74 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -21,9 +21,6 @@ * Environment Configuration */ -#define CONFIG_HOSTNAME "ccdc" -#define CONFIG_ROOTPATH "/opt/nfsroot" - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth1\0" \ "consoledev=ttyS1\0" \ diff --git a/include/configs/gazerbeam.h b/include/configs/gazerbeam.h index 36dcee87c5f..671b75e6986 100644 --- a/include/configs/gazerbeam.h +++ b/include/configs/gazerbeam.h @@ -55,10 +55,6 @@ * Environment Configuration */ -/* TODO: Turn into string option and migrate to Kconfig */ -#define CONFIG_HOSTNAME "gazerbeam" -#define CONFIG_ROOTPATH "/opt/nfsroot" - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "consoledev=ttyS1\0" \ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 4d0a78c6269..298a8f5aa2a 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -57,7 +57,5 @@ /* Persistent Environment Config */ /* Environment */ -#define CONFIG_IPADDR 192.168.1.1 -#define CONFIG_SERVERIP 192.168.1.146 #endif /* __CONFIG_H */ diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 25bb41ebc46..596e4ff8c3b 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -19,9 +19,6 @@ /* Integrator CP-specific configuration */ #define CFG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */ -#define CONFIG_SERVERIP 192.168.1.100 -#define CONFIG_IPADDR 192.168.1.104 - /* * Miscellaneous configurable options */ diff --git a/include/configs/kontron-sl-mx6ul.h b/include/configs/kontron-sl-mx6ul.h index 6fcacdb0c66..7c5f673c0f4 100644 --- a/include/configs/kontron-sl-mx6ul.h +++ b/include/configs/kontron-sl-mx6ul.h @@ -23,7 +23,6 @@ /* Board and environment settings */ #define CONFIG_MXC_UART_BASE UART4_BASE -#define CONFIG_HOSTNAME "kontron-mx6ul" #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h index 80a32304606..beb1926c12a 100644 --- a/include/configs/kontron-sl-mx8mm.h +++ b/include/configs/kontron-sl-mx8mm.h @@ -23,7 +23,6 @@ #define CFG_SYS_INIT_RAM_SIZE 0x200000 /* Board and environment settings */ -#define CONFIG_HOSTNAME "kontron-mx8mm" #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h index 66591390d90..189b2113f75 100644 --- a/include/configs/m53menlo.h +++ b/include/configs/m53menlo.h @@ -84,7 +84,6 @@ /* * Extra Environments */ -#define CONFIG_HOSTNAME "m53menlo" #define CONFIG_EXTRA_ENV_SETTINGS \ "consdev=ttymxc0\0" \ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index edd2466caa9..b8b08974c7e 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -16,8 +16,6 @@ # define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -#define CONFIG_HOSTNAME "microblaze-generic" - /* architecture dependent code */ #if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP) #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na) diff --git a/include/configs/mt7622.h b/include/configs/mt7622.h index 8c297266d8b..65415129534 100644 --- a/include/configs/mt7622.h +++ b/include/configs/mt7622.h @@ -18,7 +18,5 @@ #define CFG_SYS_SDRAM_BASE 0x40000000 /* Ethernet */ -#define CONFIG_IPADDR 192.168.1.1 -#define CONFIG_SERVERIP 192.168.1.3 #endif diff --git a/include/configs/mt7623.h b/include/configs/mt7623.h index 39a7ba76633..93161bd24f0 100644 --- a/include/configs/mt7623.h +++ b/include/configs/mt7623.h @@ -33,8 +33,6 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" /* Ethernet */ -#define CONFIG_IPADDR 192.168.1.1 -#define CONFIG_SERVERIP 192.168.1.2 #ifdef CONFIG_DISTRO_DEFAULTS diff --git a/include/configs/mt7629.h b/include/configs/mt7629.h index bfa44aacc72..99b09ad41e7 100644 --- a/include/configs/mt7629.h +++ b/include/configs/mt7629.h @@ -28,7 +28,5 @@ #define CFG_SYS_SDRAM_BASE 0x40000000 /* Ethernet */ -#define CONFIG_IPADDR 192.168.1.1 -#define CONFIG_SERVERIP 192.168.1.2 #endif diff --git a/include/configs/mvebu_alleycat-5.h b/include/configs/mvebu_alleycat-5.h index 5c9620371e3..3ad3aefa755 100644 --- a/include/configs/mvebu_alleycat-5.h +++ b/include/configs/mvebu_alleycat-5.h @@ -15,11 +15,6 @@ 115200, 230400, 460800, 921600 } /* Default Env vars */ -#define CONFIG_IPADDR 0.0.0.0 /* In order to cause an error */ -#define CONFIG_SERVERIP 0.0.0.0 /* In order to cause an error */ -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_GATEWAYIP 0.0.0.0 -#define CONFIG_ROOTPATH "/srv/nfs/" /* Default Dir for NFS */ #define BOOT_TARGET_DEVICES(func) \ func(USB, usb, 0) \ diff --git a/include/configs/novena.h b/include/configs/novena.h index 4e46dfc526c..6e4bdce1c08 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -25,7 +25,6 @@ */ /* Booting Linux */ -#define CONFIG_HOSTNAME "novena" /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/npi_imx6ull.h b/include/configs/npi_imx6ull.h index 09c4ddb6646..2eebd0c9a45 100644 --- a/include/configs/npi_imx6ull.h +++ b/include/configs/npi_imx6ull.h @@ -18,8 +18,6 @@ /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR -#define CONFIG_NETMASK 255.255.255.0 - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h index e42a736136b..5c44b9dcb20 100644 --- a/include/configs/opos6uldev.h +++ b/include/configs/opos6uldev.h @@ -27,6 +27,4 @@ /* LCD */ #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR -#define CONFIG_ROOTPATH "/tftpboot/opos6ul-root" - #endif /* __OPOS6ULDEV_CONFIG_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index eb2c5a2d837..ee25990b034 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -396,15 +396,12 @@ /* * Environment Configuration */ -#define CONFIG_HOSTNAME "unknown" -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #include "p1_p2_bootsrc.h" #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ -"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ +"uboot=" CONFIG_UBOOTPATH "\0" \ "loadaddr=1000000\0" \ "bootfile=uImage\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ diff --git a/include/configs/poleg.h b/include/configs/poleg.h index 518d7a3639c..075729e5d37 100644 --- a/include/configs/poleg.h +++ b/include/configs/poleg.h @@ -14,9 +14,6 @@ #define CFG_SYS_SDRAM_BASE 0x0 /* Default environemnt variables */ -#define CONFIG_SERVERIP 192.168.0.1 -#define CONFIG_IPADDR 192.168.0.2 -#define CONFIG_NETMASK 255.255.255.0 #define CONFIG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \ "stdin=serial\0" \ "stdout=serial\0" \ diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index 30a9eae8523..d0561899586 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -58,7 +58,5 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); /* * Environment Configuration */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ #endif /* __QEMU_PPCE500_H */ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 5a001716fb0..1b1787a3d3c 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -17,8 +17,6 @@ /* commands to include */ -#define CONFIG_ROOTPATH "/opt/eldk" - /* Clock Defines */ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index 70d9f3607a6..d88b07bc159 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -13,7 +13,6 @@ /* Booting Linux */ /* Extra Environment */ -#define CONFIG_HOSTNAME "socfpga_vining_fpga" /* * Active LOW GPIO buttons: diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h index c9cfadd9ce0..9715dfad1c9 100644 --- a/include/configs/stm32mp15_common.h +++ b/include/configs/stm32mp15_common.h @@ -24,9 +24,6 @@ /* NAND support */ /* Ethernet need */ -#ifdef CONFIG_DWC_ETH_QOS -#define CONFIG_SERVERIP 192.168.1.1 -#endif #define STM32MP_FIP_IMAGE_GUID \ EFI_GUID(0x19d5df83, 0x11b0, 0x457b, 0xbe, 0x2c, \ diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index f81cef0a2c4..ce941d832a5 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -8,8 +8,6 @@ #ifndef __STMARK2_CONFIG_H #define __STMARK2_CONFIG_H -#define CONFIG_HOSTNAME "stmark2" - #define CFG_SYS_UART_PORT 0 #define LDS_BOARD_TEXT \ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 8cd81f1cddd..7fee64029d8 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -46,10 +46,6 @@ /* * Network Configuration */ -#define CONFIG_SERVERIP 192.168.11.1 -#define CONFIG_IPADDR 192.168.11.10 -#define CONFIG_GATEWAYIP 192.168.11.1 -#define CONFIG_NETMASK 255.255.255.0 #if defined(CONFIG_ARM64) /* ARM Trusted Firmware */ @@ -62,8 +58,6 @@ "third_image=u-boot.bin\0" #endif -#define CONFIG_ROOTPATH "/nfs/root/path" - #ifdef CONFIG_FIT #define KERNEL_ADDR_R_OFFSET "0x05100000" #define LINUXBOOT_ENV_SETTINGS \ diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index a2bc3cd23a5..7f79c6342fc 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -28,7 +28,6 @@ #define CONFIG_MXC_USB_FLAGS 0 /* Linux boot */ -#define CONFIG_HOSTNAME "usbarmory" #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0) diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 3e17b53dde2..9bf2462010d 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -41,8 +41,6 @@ */ /* Default environment */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_HOSTNAME "x86" #define CONFIG_RAMDISK_ADDR 0x4000000 #if defined(CONFIG_GENERATE_ACPI_TABLE) || defined(CONFIG_EFI_STUB) #define CONFIG_OTHBOOTARGS "othbootargs=\0" diff --git a/include/configs/xea.h b/include/configs/xea.h index b432ab2dc8e..a3dc0c74ebb 100644 --- a/include/configs/xea.h +++ b/include/configs/xea.h @@ -26,7 +26,6 @@ #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 /* Extra Environment */ -#define CONFIG_HOSTNAME "xea" #define CONFIG_EXTRA_ENV_SETTINGS \ "bootmode=update\0" \ diff --git a/include/env_default.h b/include/env_default.h index 7c9c00a9692..3b7685ee26c 100644 --- a/include/env_default.h +++ b/include/env_default.h @@ -53,11 +53,11 @@ const char default_environment[] = { #ifdef CONFIG_ETHPRIME "ethprime=" CONFIG_ETHPRIME "\0" #endif -#ifdef CONFIG_IPADDR - "ipaddr=" __stringify(CONFIG_IPADDR) "\0" +#ifdef CONFIG_USE_IPADDR + "ipaddr=" CONFIG_IPADDR "\0" #endif -#ifdef CONFIG_SERVERIP - "serverip=" __stringify(CONFIG_SERVERIP) "\0" +#ifdef CONFIG_USE_SERVERIP + "serverip=" CONFIG_SERVERIP "\0" #endif #ifdef CONFIG_SYS_DISABLE_AUTOLOAD "autoload=0\0" @@ -65,17 +65,17 @@ const char default_environment[] = { #ifdef CONFIG_PREBOOT_DEFINED "preboot=" CONFIG_PREBOOT "\0" #endif -#ifdef CONFIG_ROOTPATH +#ifdef CONFIG_USE_ROOTPATH "rootpath=" CONFIG_ROOTPATH "\0" #endif -#ifdef CONFIG_GATEWAYIP - "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0" +#ifdef CONFIG_USE_GATEWAYIP + "gatewayip=" CONFIG_GATEWAYIP "\0" #endif -#ifdef CONFIG_NETMASK - "netmask=" __stringify(CONFIG_NETMASK) "\0" +#ifdef CONFIG_USE_NETMASK + "netmask=" CONFIG_NETMASK "\0" #endif -#ifdef CONFIG_HOSTNAME - "hostname=" CONFIG_HOSTNAME "\0" +#ifdef CONFIG_USE_HOSTNAME + "hostname=" CONFIG_HOSTNAME "\0" #endif #ifdef CONFIG_USE_BOOTFILE "bootfile=" CONFIG_BOOTFILE "\0" diff --git a/net/Kconfig b/net/Kconfig index a1ec3f8542e..4215889127c 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -174,6 +174,58 @@ config BOOTP_MAX_ROOT_PATH_LEN help Select maximal length of option 17 root path. +config USE_GATEWAYIP + bool "Set a default 'gateway' value in the environment" + help + Defines a default value for the IP address of the default router + where packets to other networks are sent to. (Environment variable + "gatewayip") + +config GATEWAYIP + string "Value of the default 'gateway' value in the environment" + depends on USE_GATEWAYIP + +config USE_IPADDR + bool "Set a default 'ipaddr' value in the environment" + help + Define a default value for the IP address to use for the default + Ethernet interface, in case this is not determined through e.g. + bootp. (Environment variable "ipaddr") + +config IPADDR + string "Value of the default 'ipaddr' value in the environment" + depends on USE_IPADDR + +config USE_NETMASK + bool "Set a default 'netmask' value in the environment" + help + Defines a default value for the subnet mask (or routing prefix) which + is used to determine if an IP address belongs to the local subnet or + needs to be forwarded through a router. (Environment variable "netmask") + +config NETMASK + string "Value of the default 'netmask' value in the environment" + depends on USE_NETMASK + +config USE_ROOTPATH + bool "Set a default 'rootpath' value in the environment" + +config ROOTPATH + string "Value of the default 'rootpath' value in the environment" + depends on USE_ROOTPATH + default "/opt/nfsroot" + +config USE_SERVERIP + bool "Set a default 'serverip' value in the environment" + help + Defines a default value for the IP address of a TFTP server to + contact when using the "tftboot" command. (Environment variable + "serverip") + +config SERVERIP + string "Value of the default 'serverip' value in the environment" + depends on USE_SERVERIP + config PROT_TCP bool "TCP stack" help From b5f7d8816225f869e3fd63d78d017308af0ac224 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:28 -0500 Subject: [PATCH 18/41] arm: samsung: Rename CONFIG_G_DNL_*_NUM variables Following how g_dnl_bind_fixup is used on other platforms, rename the unchanging defines used here to be prefixed with EXYNOS rather than Samsung, and define them here. Cc: Minkyu Kang Cc: Jaehoon Chung Signed-off-by: Tom Rini --- board/samsung/common/gadget.c | 14 ++++++++++---- include/configs/dh_imx6.h | 4 ---- include/configs/exynos4-common.h | 6 ------ include/configs/odroid_xu3.h | 8 -------- include/configs/s5p_goni.h | 7 ------- include/configs/socfpga_common.h | 4 ---- 6 files changed, 10 insertions(+), 33 deletions(-) diff --git a/board/samsung/common/gadget.c b/board/samsung/common/gadget.c index 6d783e61e0d..9487f9ec4e0 100644 --- a/board/samsung/common/gadget.c +++ b/board/samsung/common/gadget.c @@ -7,14 +7,20 @@ #include #include +#define EXYNOS_G_DNL_THOR_VENDOR_NUM 0x04E8 +#define EXYNOS_G_DNL_THOR_PRODUCT_NUM 0x685D + +#define EXYNOS_G_DNL_UMS_VENDOR_NUM 0x0525 +#define EXYNOS_G_DNL_UMS_PRODUCT_NUM 0xA4A5 + int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name) { if (!strcmp(name, "usb_dnl_thor")) { - put_unaligned(CONFIG_G_DNL_THOR_VENDOR_NUM, &dev->idVendor); - put_unaligned(CONFIG_G_DNL_THOR_PRODUCT_NUM, &dev->idProduct); + put_unaligned(EXYNOS_G_DNL_THOR_VENDOR_NUM, &dev->idVendor); + put_unaligned(EXYNOS_G_DNL_THOR_PRODUCT_NUM, &dev->idProduct); } else if (!strcmp(name, "usb_dnl_ums")) { - put_unaligned(CONFIG_G_DNL_UMS_VENDOR_NUM, &dev->idVendor); - put_unaligned(CONFIG_G_DNL_UMS_PRODUCT_NUM, &dev->idProduct); + put_unaligned(EXYNOS_G_DNL_UMS_VENDOR_NUM, &dev->idVendor); + put_unaligned(EXYNOS_G_DNL_UMS_PRODUCT_NUM, &dev->idProduct); } else { put_unaligned(CONFIG_USB_GADGET_VENDOR_NUM, &dev->idVendor); put_unaligned(CONFIG_USB_GADGET_PRODUCT_NUM, &dev->idProduct); diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index f9b3d19480e..3aed6299ed5 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -38,10 +38,6 @@ /* USB Gadget (DFU, UMS) */ #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) #define DFU_DEFAULT_POLL_TIMEOUT 300 - -/* USB IDs */ -#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 #endif #endif diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index bf965e5cedb..e8c182bc2f3 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -12,12 +12,6 @@ #define DFU_DEFAULT_POLL_TIMEOUT 300 -/* USB Samsung's IDs */ -#define CONFIG_G_DNL_THOR_VENDOR_NUM 0x04E8 -#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D -#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 - /* Common environment variables */ #define ENV_ITB \ "loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \ diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 5bbe7aadcb2..bf63a4de076 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -20,14 +20,6 @@ #define DFU_DEFAULT_POLL_TIMEOUT 300 #define DFU_MANIFEST_POLL_TIMEOUT 25000 -/* THOR */ -#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM -#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D - -/* UMS */ -#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 - #define CONFIG_DFU_ALT_SYSTEM \ "uImage fat 0 1;" \ "zImage fat 0 1;" \ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 97f5dd0e473..da83db1f68a 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -24,13 +24,6 @@ /* USB Composite download gadget - g_dnl */ #define DFU_DEFAULT_POLL_TIMEOUT 300 -/* USB Samsung's IDs */ - -#define CONFIG_G_DNL_THOR_VENDOR_NUM 0x04E8 -#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D -#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 - /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ /* partitions definitions */ diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index bbbdea6664c..088cd4d4f7f 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -83,10 +83,6 @@ */ #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) #define DFU_DEFAULT_POLL_TIMEOUT 300 - -/* USB IDs */ -#define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525 -#define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 #endif /* From 495fc3e836df25e24a1b228b78f3e45166fd2f96 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:29 -0500 Subject: [PATCH 19/41] env: eeprom: Remove CONFIG_I2C_ENV_EEPROM_BUS support This functionality is currently unused, and has not been migrated to using DM_I2C, even. Drop this. Signed-off-by: Tom Rini --- env/Kconfig | 7 ------- env/eeprom.c | 59 +++++++--------------------------------------------- 2 files changed, 8 insertions(+), 58 deletions(-) diff --git a/env/Kconfig b/env/Kconfig index c13a5b0d467..c28d9e89f68 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -78,13 +78,6 @@ config ENV_IS_IN_EEPROM still be one byte because the extra address bits are hidden in the chip address. - - CONFIG_I2C_ENV_EEPROM_BUS - if you have an Environment on an EEPROM reached over - I2C muxes, you can define here, how to reach this - EEPROM. For example: - - #define CONFIG_I2C_ENV_EEPROM_BUS 1 - EEPROM which holds the environment, is reached over a pca9547 i2c mux with address 0x70, channel 3. diff --git a/env/eeprom.c b/env/eeprom.c index f8556a47213..7ce7e9972b2 100644 --- a/env/eeprom.c +++ b/env/eeprom.c @@ -15,55 +15,12 @@ #include #include #include -#if defined(CONFIG_I2C_ENV_EEPROM_BUS) -#include -#endif #include #include #include /* for BUG_ON */ DECLARE_GLOBAL_DATA_PTR; -static int eeprom_bus_read(unsigned dev_addr, unsigned offset, - uchar *buffer, unsigned cnt) -{ - int rcode; -#if defined(CONFIG_I2C_ENV_EEPROM_BUS) - int old_bus = i2c_get_bus_num(); - - if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS) - i2c_set_bus_num(CONFIG_I2C_ENV_EEPROM_BUS); -#endif - - rcode = eeprom_read(dev_addr, offset, buffer, cnt); - -#if defined(CONFIG_I2C_ENV_EEPROM_BUS) - i2c_set_bus_num(old_bus); -#endif - - return rcode; -} - -static int eeprom_bus_write(unsigned dev_addr, unsigned offset, - uchar *buffer, unsigned cnt) -{ - int rcode; -#if defined(CONFIG_I2C_ENV_EEPROM_BUS) - int old_bus = i2c_get_bus_num(); - - if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS) - i2c_set_bus_num(CONFIG_I2C_ENV_EEPROM_BUS); -#endif - - rcode = eeprom_write(dev_addr, offset, buffer, cnt); - -#if defined(CONFIG_I2C_ENV_EEPROM_BUS) - i2c_set_bus_num(old_bus); -#endif - - return rcode; -} - static int env_eeprom_load(void) { char buf_env[CONFIG_ENV_SIZE]; @@ -82,11 +39,11 @@ static int env_eeprom_load(void) for (i = 0; i < 2; i++) { /* read CRC */ - eeprom_bus_read(CONFIG_SYS_I2C_EEPROM_ADDR, + eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off_env[i] + offsetof(env_t, crc), (uchar *)&crc[i], sizeof(ulong)); /* read FLAGS */ - eeprom_bus_read(CONFIG_SYS_I2C_EEPROM_ADDR, + eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off_env[i] + offsetof(env_t, flags), (uchar *)&flags[i], sizeof(uchar)); @@ -96,7 +53,7 @@ static int env_eeprom_load(void) while (len > 0) { int n = (len > sizeof(rdbuf)) ? sizeof(rdbuf) : len; - eeprom_bus_read(CONFIG_SYS_I2C_EEPROM_ADDR, off, + eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off, rdbuf, n); crc_tmp = crc32(crc_tmp, rdbuf, n); @@ -138,7 +95,7 @@ static int env_eeprom_load(void) eeprom_init(-1); /* prepare for EEPROM read/write */ /* read old CRC */ - eeprom_bus_read(CONFIG_SYS_I2C_EEPROM_ADDR, + eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_ENV_OFFSET + offsetof(env_t, crc), (uchar *)&crc, sizeof(ulong)); @@ -148,7 +105,7 @@ static int env_eeprom_load(void) while (len > 0) { int n = (len > sizeof(rdbuf)) ? sizeof(rdbuf) : len; - eeprom_bus_read(CONFIG_SYS_I2C_EEPROM_ADDR, + eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_ENV_OFFSET + off, rdbuf, n); new = crc32(new, rdbuf, n); len -= n; @@ -168,7 +125,7 @@ static int env_eeprom_load(void) off = CONFIG_ENV_OFFSET_REDUND; #endif - eeprom_bus_read(CONFIG_SYS_I2C_EEPROM_ADDR, + eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off, (uchar *)buf_env, CONFIG_ENV_SIZE); return env_import(buf_env, 1, H_EXTERNAL); @@ -197,12 +154,12 @@ static int env_eeprom_save(void) env_new.flags = ENV_REDUND_ACTIVE; #endif - rc = eeprom_bus_write(CONFIG_SYS_I2C_EEPROM_ADDR, + rc = eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR, off, (uchar *)&env_new, CONFIG_ENV_SIZE); #ifdef CONFIG_ENV_OFFSET_REDUND if (rc == 0) { - eeprom_bus_write(CONFIG_SYS_I2C_EEPROM_ADDR, + eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR, off_red + offsetof(env_t, flags), (uchar *)&flag_obsolete, 1); From 1353b25ec58eba4cd26f4101ebb1b6047838a105 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:30 -0500 Subject: [PATCH 20/41] i2c: Remove CONFIG_I2C_MULTI_BUS This functionality is part of the legacy I2C subsystem and is currently unused anywhere. Remove the remaining references. Signed-off-by: Tom Rini --- README | 10 +-------- cmd/i2c.c | 15 +++++-------- drivers/i2c/mv_i2c.c | 33 ---------------------------- include/configs/display5.h | 3 --- include/configs/km/pg-wcom-ls102xa.h | 1 - include/configs/novena.h | 3 --- 6 files changed, 7 insertions(+), 58 deletions(-) diff --git a/README b/README index c0f55b2586c..12096331760 100644 --- a/README +++ b/README @@ -984,21 +984,13 @@ The following options need to be configured: CFG_SYS_I2C_NOPROBES This option specifies a list of I2C devices that will be skipped - when the 'i2c probe' command is issued. If CONFIG_I2C_MULTI_BUS - is set, specify a list of bus-device pairs. Otherwise, specify - a 1D array of device addresses + when the 'i2c probe' command is issued. e.g. - #undef CONFIG_I2C_MULTI_BUS #define CFG_SYS_I2C_NOPROBES {0x50,0x68} will skip addresses 0x50 and 0x68 on a board with one I2C bus - #define CONFIG_I2C_MULTI_BUS - #define CFG_SYS_I2C_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} - - will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 - CFG_SYS_RTC_BUS_NUM If defined, then this indicates the I2C bus number for the RTC. diff --git a/cmd/i2c.c b/cmd/i2c.c index da8b4c25555..f204061cf09 100644 --- a/cmd/i2c.c +++ b/cmd/i2c.c @@ -98,7 +98,7 @@ static uint i2c_mm_last_alen; * pairs. The following macros take care of this */ #if defined(CFG_SYS_I2C_NOPROBES) -#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS) +#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) static struct { uchar bus; @@ -1764,8 +1764,7 @@ static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc, * Returns zero on success, CMD_RET_USAGE in case of misuse and negative * on error. */ -#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS) || \ - CONFIG_IS_ENABLED(DM_I2C) +#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C) static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { @@ -1915,10 +1914,9 @@ static struct cmd_tbl cmd_i2c_sub[] = { U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""), #endif U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""), -#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || \ - defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C) +#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C) U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""), -#endif /* CONFIG_I2C_MULTI_BUS */ +#endif #if defined(CONFIG_I2C_EDID) U_BOOT_CMD_MKENT(edid, 1, 1, do_edid, "", ""), #endif /* CONFIG_I2C_EDID */ @@ -1992,10 +1990,9 @@ static char i2c_help_text[] = "i2c " /* That's the prefix for the crc32 command below. */ #endif "crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" -#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || \ - defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C) +#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C) "i2c dev [dev] - show or set current I2C bus\n" -#endif /* CONFIG_I2C_MULTI_BUS */ +#endif #if defined(CONFIG_I2C_EDID) "i2c edid chip - print EDID configuration information\n" #endif /* CONFIG_I2C_EDID */ diff --git a/drivers/i2c/mv_i2c.c b/drivers/i2c/mv_i2c.c index 8ee17f0a450..5bc9cd7b295 100644 --- a/drivers/i2c/mv_i2c.c +++ b/drivers/i2c/mv_i2c.c @@ -374,45 +374,12 @@ static int __i2c_write(struct mv_i2c *base, uchar chip, u8 *addr, int alen, static struct mv_i2c *base_glob; -#ifdef CONFIG_I2C_MULTI_BUS -static unsigned long i2c_regs[CONFIG_MV_I2C_NUM] = CONFIG_MV_I2C_REG; -static unsigned int bus_initialized[CONFIG_MV_I2C_NUM]; -static unsigned int current_bus; - -int i2c_set_bus_num(unsigned int bus) -{ - if ((bus < 0) || (bus >= CONFIG_MV_I2C_NUM)) { - printf("Bad bus: %d\n", bus); - return -1; - } - - base_glob = (struct mv_i2c *)i2c_regs[bus]; - current_bus = bus; - - if (!bus_initialized[current_bus]) { - bus_initialized[current_bus] = 1; - } - - return 0; -} - -unsigned int i2c_get_bus_num(void) -{ - return current_bus; -} -#endif - /* API Functions */ void i2c_init(int speed, int slaveaddr) { u32 val; -#ifdef CONFIG_I2C_MULTI_BUS - current_bus = 0; - base_glob = (struct mv_i2c *)i2c_regs[current_bus]; -#else base_glob = (struct mv_i2c *)CONFIG_MV_I2C_REG; -#endif if (speed > I2C_SPEED_STANDARD_RATE) val = ICR_FM; diff --git a/include/configs/display5.h b/include/configs/display5.h index 7636d2869a9..5cbeb9224c3 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -36,9 +36,6 @@ #define CONFIG_MXC_UART_BASE UART5_BASE -/* I2C Configs */ -#define CONFIG_I2C_MULTI_BUS - /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR 0 #define CFG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index 8d5b24d827d..ffd394691a0 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -149,7 +149,6 @@ * I2C */ -#define CONFIG_I2C_MULTI_BUS #define CFG_SYS_I2C_MAX_HOPS 1 #define CFG_SYS_NUM_I2C_BUSES 3 #define I2C_MUX_PCA_ADDR 0x70 diff --git a/include/configs/novena.h b/include/configs/novena.h index 6e4bdce1c08..79e49c74f85 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -33,9 +33,6 @@ #define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE -/* I2C */ -#define CONFIG_I2C_MULTI_BUS - /* I2C EEPROM */ /* MMC Configs */ From 308520b8f2b11b3427fe8a02171839992bc85da6 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:31 -0500 Subject: [PATCH 21/41] global: Remove unused CONFIG symbols This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini --- README | 11 ----------- arch/arm/include/asm/arch-ls102xa/config.h | 1 - arch/arm/mach-mvebu/include/mach/config.h | 9 --------- arch/powerpc/include/asm/config_mpc85xx.h | 1 - arch/xtensa/include/asm/config.h | 1 - board/Marvell/openrd/openrd.c | 2 +- drivers/net/mvgbe.c | 4 ---- drivers/net/mvgbe.h | 7 ------- drivers/ram/mpc83xx_sdram.c | 7 +------ include/configs/MPC837XERDB.h | 8 +++----- include/configs/P1010RDB.h | 1 - include/configs/P2041RDB.h | 9 ++------- include/configs/SBx81LIFKW.h | 9 --------- include/configs/SBx81LIFXCAT.h | 9 --------- include/configs/T102xRDB.h | 2 -- include/configs/T104xRDB.h | 4 ---- include/configs/T208xQDS.h | 2 -- include/configs/T208xRDB.h | 2 -- include/configs/T4240RDB.h | 3 --- include/configs/alt.h | 3 --- include/configs/ax25-ae350.h | 3 --- include/configs/beaver.h | 4 ---- include/configs/blanche.h | 4 +--- include/configs/cardhu.h | 4 ---- include/configs/cei-tk1-som.h | 3 --- include/configs/colibri_vf.h | 4 ---- include/configs/dalmore.h | 3 --- include/configs/dns325.h | 7 ------- include/configs/dockstar.h | 6 ------ include/configs/dra7xx_evm.h | 1 - include/configs/dreamplug.h | 6 ------ include/configs/ds109.h | 8 -------- include/configs/eb_cpu5282.h | 8 -------- include/configs/efi-x86_app.h | 2 -- include/configs/embestmx6boards.h | 6 +++--- include/configs/ethernut5.h | 1 - include/configs/exynos5-common.h | 2 -- include/configs/exynos5420-common.h | 2 -- include/configs/exynos7420-common.h | 4 ---- include/configs/goflexhome.h | 6 ------ include/configs/guruplug.h | 8 -------- include/configs/ib62x0.h | 8 -------- include/configs/iconnect.h | 10 ---------- include/configs/jetson-tk1.h | 5 ----- include/configs/k2e_evm.h | 1 - include/configs/k2g_evm.h | 1 - include/configs/k2l_evm.h | 1 - include/configs/kmcent2.h | 1 - include/configs/kontron_sl28.h | 1 - include/configs/lacie_kw.h | 7 ------- include/configs/legoev3.h | 1 - include/configs/ls1028a_common.h | 1 - include/configs/ls1043a_common.h | 1 - include/configs/ls1043aqds.h | 1 - include/configs/ls1043ardb.h | 1 - include/configs/ls1046a_common.h | 1 - include/configs/ls1046afrwy.h | 1 - include/configs/ls1046aqds.h | 1 - include/configs/ls1046ardb.h | 1 - include/configs/ls1088a_common.h | 1 - include/configs/ls1088aqds.h | 1 - include/configs/ls1088ardb.h | 1 - include/configs/ls2080a_common.h | 1 - include/configs/ls2080aqds.h | 1 - include/configs/ls2080ardb.h | 1 - include/configs/lx2160a_common.h | 1 - include/configs/malta.h | 2 -- include/configs/mt7621.h | 1 - include/configs/mt7629.h | 5 +---- include/configs/mxs.h | 5 ----- include/configs/nas220.h | 12 ------------ include/configs/nsa310s.h | 4 ---- include/configs/nyan-big.h | 3 --- include/configs/openrd.h | 22 ---------------------- include/configs/origen.h | 6 ------ include/configs/p2371-0000.h | 3 --- include/configs/p2371-2180.h | 3 --- include/configs/p2571.h | 3 --- include/configs/p3450-0000.h | 3 --- include/configs/pm9263.h | 5 ----- include/configs/pogo_e02.h | 6 ------ include/configs/pogo_v4.h | 6 ------ include/configs/porter.h | 3 --- include/configs/qemu-ppce500.h | 1 - include/configs/rcar-gen3-common.h | 1 - include/configs/rk3399_common.h | 10 ---------- include/configs/sheevaplug.h | 6 ------ include/configs/silk.h | 3 --- include/configs/smdk5420.h | 2 -- include/configs/smdkv310.h | 3 --- include/configs/socfpga_sr1500.h | 6 ------ include/configs/socrates.h | 4 ---- include/configs/stout.h | 3 --- include/configs/synquacer.h | 1 - include/configs/tec-ng.h | 6 ------ include/configs/venice2.h | 3 --- include/configs/vinco.h | 3 --- include/configs/x86-common.h | 16 ---------------- include/configs/xpress.h | 7 ++----- 99 files changed, 14 insertions(+), 391 deletions(-) diff --git a/README b/README index 12096331760..9e2627863ce 100644 --- a/README +++ b/README @@ -373,12 +373,6 @@ The following options need to be configured: such as ARM architectural timer initialization. - Linux Kernel Interface: - CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] - - When transferring memsize parameter to Linux, some versions - expect it to be in bytes, others in MB. - Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. - CONFIG_OF_LIBFDT New kernel versions are expecting firmware settings to be @@ -585,11 +579,6 @@ The following options need to be configured: Support for generic parallel port TPM devices. Only one device per system is supported at this time. - CONFIG_TPM_TIS_BASE_ADDRESS - Base address where the generic TPM device is mapped - to. Contemporary x86 systems usually map it at - 0xfed40000. - CONFIG_TPM Define this to enable the TPM support library which provides functional interfaces to some TPM commands. diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 14f86df5ed5..4a4d6424414 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -70,7 +70,6 @@ /* SATA */ #define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000) #ifdef CONFIG_DDR_SPD -#define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30) #endif diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h index 2e06f2bdaee..96a08104ff4 100644 --- a/arch/arm/mach-mvebu/include/mach/config.h +++ b/arch/arm/mach-mvebu/include/mach/config.h @@ -30,13 +30,4 @@ /* Needed for SPI NOR booting in SPL */ #define CONFIG_DM_SEQ_ALIAS 1 -/* - * I2C related stuff - */ -#ifdef CONFIG_CMD_I2C -#ifndef CONFIG_SYS_I2C_SOFT -#define CONFIG_I2C_MVTWSI -#endif -#endif - #endif /* __MVEBU_CONFIG_H */ diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index edaf8baaaeb..e8059910606 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -133,7 +133,6 @@ #define CFG_SYS_FM_MURAM_SIZE 0x60000 #ifdef CONFIG_ARCH_B4860 -#define CONFIG_NUM_DSP_CPUS 6 #define CFG_SYS_FSL_CLUSTER_CLOCKS { 1, 4, 4, 4 } #define CFG_SYS_NUM_FM1_DTSEC 6 #define CFG_SYS_NUM_FM1_10GEC 2 diff --git a/arch/xtensa/include/asm/config.h b/arch/xtensa/include/asm/config.h index a1096ab1961..21b334b9389 100644 --- a/arch/xtensa/include/asm/config.h +++ b/arch/xtensa/include/asm/config.h @@ -14,7 +14,6 @@ * restricting used physical memory to the first 128MB. */ #if XCHAL_HAVE_PTP_MMU -#define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED (128 << 20) #endif diff --git a/board/Marvell/openrd/openrd.c b/board/Marvell/openrd/openrd.c index f44ac3315eb..581e2e084d6 100644 --- a/board/Marvell/openrd/openrd.c +++ b/board/Marvell/openrd/openrd.c @@ -140,7 +140,7 @@ void mv_phy_init(char *name) /* reset the phy */ miiphy_reset(name, devadr); - printf(PHY_NO" Initialized on %s\n", name); + printf("Initialized on %s\n", name); } void reset_phy(void) diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c index 58363fce057..3587ca2124e 100644 --- a/drivers/net/mvgbe.c +++ b/drivers/net/mvgbe.c @@ -37,10 +37,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifndef CONFIG_MVGBE_PORTS -# define CONFIG_MVGBE_PORTS {0, 0} -#endif - #define MV_PHY_ADR_REQUEST 0xee #define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi) #define MVGBE_PGADR_REG 22 diff --git a/drivers/net/mvgbe.h b/drivers/net/mvgbe.h index e3f5ac06399..6514ab67bab 100644 --- a/drivers/net/mvgbe.h +++ b/drivers/net/mvgbe.h @@ -11,13 +11,6 @@ #ifndef __MVGBE_H__ #define __MVGBE_H__ -/* PHY_BASE_ADR is board specific and can be configured */ -#if defined (CONFIG_PHY_BASE_ADR) -#define PHY_BASE_ADR CONFIG_PHY_BASE_ADR -#else -#define PHY_BASE_ADR 0x08 /* default phy base addr */ -#endif - /* Constants */ #define INT_CAUSE_UNMASK_ALL 0x0007ffff #define INT_CAUSE_UNMASK_ALL_EXT 0x0011ffff diff --git a/drivers/ram/mpc83xx_sdram.c b/drivers/ram/mpc83xx_sdram.c index a53ff93a6b0..11676d4fae7 100644 --- a/drivers/ram/mpc83xx_sdram.c +++ b/drivers/ram/mpc83xx_sdram.c @@ -118,12 +118,7 @@ int dram_init(void) phys_size_t get_effective_memsize(void) { - if (!IS_ENABLED(CONFIG_VERY_BIG_RAM)) - return gd->ram_size; - - /* Limit stack to what we can reasonable map */ - return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ? - CONFIG_MAX_MEM_MAPPED : gd->ram_size); + return gd->ram_size; } /** diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 7dff3cc6913..7b932eb3890 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -195,12 +195,10 @@ * Environment Configuration */ -#define CONFIG_NETDEV "eth1" - -#define CONFIG_FDTFILE "mpc8379_rdb.dtb" +#define FDTFILE "mpc8379_rdb.dtb" #define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=" CONFIG_NETDEV "\0" \ + "netdev=eth1\0" \ "uboot=" CONFIG_UBOOTPATH "\0" \ "tftpflash=tftp $loadaddr $uboot;" \ "protect off " __stringify(CONFIG_TEXT_BASE) \ @@ -214,7 +212,7 @@ "cmp.b $loadaddr " __stringify(CONFIG_TEXT_BASE) \ " $filesize\0" \ "fdtaddr=780000\0" \ - "fdtfile=" CONFIG_FDTFILE "\0" \ + "fdtfile=" FDTFILE "\0" \ "ramdiskaddr=1000000\0" \ "ramdiskfile=rootfs.ext2.gz.uboot\0" \ "console=ttyS0\0" \ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index d83563d6181..02d49c3d340 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -24,7 +24,6 @@ #ifdef CONFIG_SPIFLASH #ifdef CONFIG_NXP_ESBC -#define CONFIG_RAMBOOT_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #else #define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 0f0cdb3a681..1a157a7da05 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -12,7 +12,6 @@ #define __CONFIG_H #ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #endif @@ -46,10 +45,9 @@ /* * Config the L3 Cache as L3 SRAM */ -#define CFG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE +#define CFG_SYS_INIT_L3_ADDR CONFIG_TEXT_BASE #ifdef CONFIG_PHYS_64BIT -#define CFG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ - CONFIG_RAMBOOT_TEXT_BASE) +#define CFG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_TEXT_BASE) #else #define CFG_SYS_INIT_L3_ADDR_PHYS CFG_SYS_INIT_L3_ADDR #endif @@ -62,7 +60,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -88,7 +85,6 @@ #define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #endif -#define CONFIG_FSL_CPLD #define CPLD_BASE 0xffdf0000 /* CPLD registers */ #ifdef CONFIG_PHYS_64BIT #define CPLD_BASE_PHYS 0xfffdf0000ull @@ -131,7 +127,6 @@ #define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS + 0x8000000} /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ #ifdef CONFIG_PHYS_64BIT #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index d5c9c05767a..19ae6399476 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -36,14 +36,5 @@ /* size in bytes reserved for initial data */ #include -/* There is no PHY directly connected so don't ask it for link status */ - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ -#define CONFIG_PHY_BASE_ADR 0x01 -#endif /* CONFIG_CMD_NET */ #endif /* _CONFIG_SBX81LIFKW_H */ diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h index 23d37394e07..bdbf9d4758b 100644 --- a/include/configs/SBx81LIFXCAT.h +++ b/include/configs/SBx81LIFXCAT.h @@ -41,14 +41,5 @@ /* size in bytes reserved for initial data */ #include -/* There is no PHY directly connected so don't ask it for link status */ - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ -#define CONFIG_PHY_BASE_ADR 0x01 -#endif /* CONFIG_CMD_NET */ #endif /* _CONFIG_SBX81LIFXCAT_H */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index e815d9f81a1..4b443c75042 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -112,7 +112,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #if defined(CONFIG_TARGET_T1024RDB) @@ -269,7 +268,6 @@ #endif /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #ifdef CONFIG_PHYS_64BIT #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 6fe0bd68280..dfad76e16f1 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -86,7 +86,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -247,7 +246,6 @@ #endif /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 @@ -285,8 +283,6 @@ */ #define CFG_SYS_I2C_RTC_ADDR 0x68 -/*DVI encoder*/ -#define CONFIG_HDMI_ENCODER_I2C_ADDR 0x75 #endif /* diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 79b3d7af4ea..24c1daf9985 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -78,7 +78,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CFG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ @@ -245,7 +244,6 @@ #endif /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 2a32fe37aa9..c825e7fa0c6 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -78,7 +78,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CFG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ @@ -210,7 +209,6 @@ #endif /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index d8c4de5b3d7..95735f3fcb1 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -16,7 +16,6 @@ #ifdef CONFIG_RAMBOOT_PBL #ifndef CONFIG_SDCARD -#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #else #define RESET_VECTOR_OFFSET 0x27FFC @@ -60,7 +59,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE @@ -71,7 +69,6 @@ #define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE) /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM #define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 diff --git a/include/configs/alt.h b/include/configs/alt.h index fe303fda78a..f2774001692 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -20,9 +20,6 @@ #define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024) #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) -/* FLASH */ -#define CONFIG_SPI_FLASH_QUAD - /* SH Ether */ #define CONFIG_SH_ETHER_USE_PORT 0 #define CONFIG_SH_ETHER_PHY_ADDR 0x1 diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h index 03e04e6e680..d70f0382300 100644 --- a/include/configs/ax25-ae350.h +++ b/include/configs/ax25-ae350.h @@ -49,9 +49,6 @@ */ #define CFG_SYS_FLASH_BANKS_SIZES {0x4000000} -/* max number of sectors on one chip */ -#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2) - /* environments */ /* SPI FLASH */ diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 6b5f650811b..7078c2745c8 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -20,10 +20,6 @@ #define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -/* SPI */ -#define CONFIG_TEGRA_SLINK_CTRLS 6 -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/blanche.h b/include/configs/blanche.h index fe09997e178..d4e0f677e67 100644 --- a/include/configs/blanche.h +++ b/include/configs/blanche.h @@ -22,9 +22,7 @@ #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) /* FLASH */ -#if !defined(CONFIG_MTD_NOR_FLASH) -#define CONFIG_SH_QSPI_BASE 0xE6B10000 -#else +#if defined(CONFIG_MTD_NOR_FLASH) #define CFG_SYS_FLASH_BASE 0x00000000 #define CFG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */ #define CFG_SYS_FLASH_BANKS_LIST { (CFG_SYS_FLASH_BASE) } diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 35c5a4f1226..5cca1e18348 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -24,10 +24,6 @@ #define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -/* SPI */ -#define CONFIG_TEGRA_SLINK_CTRLS 6 -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/cei-tk1-som.h b/include/configs/cei-tk1-som.h index 55e2d744c4a..e3519ed7516 100644 --- a/include/configs/cei-tk1-som.h +++ b/include/configs/cei-tk1-som.h @@ -22,9 +22,6 @@ #define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 8a790400b46..e8918df69e0 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -14,10 +14,6 @@ #include #include -/* NAND support */ - -#define CONFIG_FDTADDR 0x84000000 - #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "fdt_addr_r=0x82000000\0" \ diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index 24cf554649b..82b2efdfe89 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -19,9 +19,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 015bc78648f..1bfb741346a 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -16,13 +16,6 @@ /* Remove or override few declarations from mv-common.h */ -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#endif - /* * Enable GPI0 support */ diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index 33ae7d654b0..a6c1e9c6d02 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -28,10 +28,4 @@ "initrd=/boot/uInitrd\0" \ "bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_DOCKSTAR_H */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index b8f518612ee..f8afcc7826e 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -13,7 +13,6 @@ #include -#define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED 0x80000000 #ifndef CONFIG_QSPI_BOOT diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index fbd83d629c0..98322a54f63 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -24,10 +24,4 @@ "x_bootargs=console=ttyS0,115200\0" \ "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_DREAMPLUG_H */ diff --git a/include/configs/ds109.h b/include/configs/ds109.h index 8553ea0b95f..8e7a86e0626 100644 --- a/include/configs/ds109.h +++ b/include/configs/ds109.h @@ -35,12 +35,4 @@ "ipaddr=192.168.1.5\0" \ "usb0Mode=host\0" -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ -#define CONFIG_PHY_BASE_ADR 8 -#endif /* CONFIG_CMD_NET */ - #endif /* _CONFIG_DS109_H */ diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 717f49ca29d..029f13dad36 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -144,13 +144,5 @@ #define CFG_SYS_DDRUA 0x05 #define CFG_SYS_PJPAR 0xFF -/*----------------------------------------------------------------------- - * I2C - */ - -#ifdef CONFIG_CMD_DATE -#define CONFIG_I2C_RTC_ADDR 0x68 -#endif - #endif /* _CONFIG_M5282EVB_H */ /*---------------------------------------------------------------------*/ diff --git a/include/configs/efi-x86_app.h b/include/configs/efi-x86_app.h index 6061a6db0a4..17a78514026 100644 --- a/include/configs/efi-x86_app.h +++ b/include/configs/efi-x86_app.h @@ -8,8 +8,6 @@ #include -#undef CONFIG_TPM_TIS_BASE_ADDRESS - #define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ "stdout=vidconsole\0" \ "stderr=vidconsole\0" diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 22e0fa5aabf..1742b1192fb 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -35,11 +35,11 @@ #if defined(CONFIG_ENV_IS_IN_MMC) /* RiOTboard */ -#define CONFIG_FDTFILE "imx6dl-riotboard.dtb" +#define FDTFILE "imx6dl-riotboard.dtb" #define CFG_SYS_FSL_USDHC_NUM 3 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) /* MarSBoard */ -#define CONFIG_FDTFILE "imx6q-marsboard.dtb" +#define FDTFILE "imx6q-marsboard.dtb" #define CFG_SYS_FSL_USDHC_NUM 2 #endif @@ -79,7 +79,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ CONSOLE_ENV_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ - "fdtfile=" CONFIG_FDTFILE "\0" \ + "fdtfile=" FDTFILE "\0" \ "finduuid=part uuid mmc 0:1 uuid\0" \ BOOTENV diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 52eb0be6761..3fd58d6bd4a 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -49,7 +49,6 @@ /* Ethernet */ #define CONFIG_PHY_ID 0 -#define CONFIG_MACB_SEARCH_PHY /* MMC */ #ifdef CONFIG_CMD_MMC diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 9b5c329bda1..8e277ce7ff2 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -27,8 +27,6 @@ /* MMC SPL */ #define COPY_BL2_FNPTR_ADDR 0x02020030 -#define CONFIG_RD_LVL - #define PHYS_SDRAM_1 CFG_SYS_SDRAM_BASE #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE #define PHYS_SDRAM_2 (CFG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h index 7a9307ccc3d..934a4ef9d1f 100644 --- a/include/configs/exynos5420-common.h +++ b/include/configs/exynos5420-common.h @@ -8,8 +8,6 @@ #ifndef __CONFIG_EXYNOS5420_H #define __CONFIG_EXYNOS5420_H -#define CONFIG_VAR_SIZE_SPL - #define CONFIG_IRAM_TOP 0x02074000 #define CONFIG_PHY_IRAM_BASE 0x02020000 diff --git a/include/configs/exynos7420-common.h b/include/configs/exynos7420-common.h index cff910c1bd5..e22dd036ccb 100644 --- a/include/configs/exynos7420-common.h +++ b/include/configs/exynos7420-common.h @@ -15,10 +15,6 @@ /* select serial console configuration */ -/* IRAM Layout */ -#define CONFIG_IRAM_BASE 0x02100000 -#define CONFIG_IRAM_SIZE 0x58000 -#define CONFIG_IRAM_END (CONFIG_IRAM_BASE + CONFIG_IRAM_SIZE) #define CPU_RELEASE_ADDR secondary_boot_addr /* select serial console configuration */ diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index 66eed9e14f8..1c86dcb1f6d 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -36,10 +36,4 @@ "kernel=/boot/uImage\0" \ "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_GOFLEXHOME_H */ diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 4954c5ca080..d196c4eda53 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -30,12 +30,4 @@ "fdt=/boot/guruplug-server-plus.dtb\0" \ "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ -#define CONFIG_PHY_BASE_ADR 0 -#endif /* CONFIG_CMD_NET */ - #endif /* _CONFIG_GURUPLUG_H */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index 05192218d22..76fc4ac8b66 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -24,14 +24,6 @@ "fdt=/boot/ib62x0.dtb\0" \ "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" -/* - * Ethernet driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 -#endif /* CONFIG_CMD_NET */ - /* * SATA driver configuration */ diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index f2e3608d3a3..6d2104b3a1c 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -16,14 +16,4 @@ "kernel=/boot/uImage\0" \ "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" -/* - * Ethernet driver configuration - * - * This board has PCIe Wifi card, so allow Ethernet to be disabled - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 11 -#endif /* CONFIG_CMD_NET */ - #endif /* _CONFIG_ICONNECT_H */ diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index b846889541c..ea4964b13d6 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -18,11 +18,6 @@ #define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -/* Environment in eMMC, at the end of 2nd "boot sector" */ - -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h index bbc58be511e..174a91c83e1 100644 --- a/include/configs/k2e_evm.h +++ b/include/configs/k2e_evm.h @@ -39,6 +39,5 @@ /* Network */ #define CONFIG_KSNET_NETCP_V1_5 #define CONFIG_KSNET_CPSW_NUM_PORTS 9 -#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE #endif /* __CONFIG_K2E_EVM_H */ diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h index bb91751d5d9..dc06d5943e5 100644 --- a/include/configs/k2g_evm.h +++ b/include/configs/k2g_evm.h @@ -53,7 +53,6 @@ /* Network */ #define CONFIG_KSNET_NETCP_V1_5 #define CONFIG_KSNET_CPSW_NUM_PORTS 2 -#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE #define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */ #define SPI_MTD_PARTS KEYSTONE_SPI1_MTD_PARTS diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h index a18158a7eb3..5d629452bae 100644 --- a/include/configs/k2l_evm.h +++ b/include/configs/k2l_evm.h @@ -39,6 +39,5 @@ /* Network */ #define CONFIG_KSNET_NETCP_V1_5 #define CONFIG_KSNET_CPSW_NUM_PORTS 5 -#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE #endif /* __CONFIG_K2L_EVM_H */ diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index 532370e9184..80bff4b8937 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -149,7 +149,6 @@ /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 9c3174d0e02..f7bb97aa0e6 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -18,7 +18,6 @@ /* DDR */ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 828f9109634..7a66df548a3 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -14,13 +14,6 @@ * Enable platform initialisation via misc_init_r() function */ -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#endif - /* * Enable GPI0 support */ diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index abe470fe890..794c1fcbed0 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -48,7 +48,6 @@ * Linux Information */ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_SETUP_INITRD_TAG #define CONFIG_EXTRA_ENV_SETTINGS \ "bootenvfile=uEnv.txt\0" \ "fdtfile=da850-lego-ev3.dtb\0" \ diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index b190bfe9c8e..2ccb20192d4 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -12,7 +12,6 @@ /* Link Definitions */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index e54e903a8a9..d0380b33732 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -31,7 +31,6 @@ /* Link Definitions */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index dab57382edd..1dca7f0aa6b 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -107,7 +107,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #endif #ifdef CONFIG_NAND_BOOT diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 12c4853ea96..043904197f0 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -82,7 +82,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #ifdef CONFIG_NAND_BOOT #define CFG_SYS_NAND_U_BOOT_SIZE (1024 << 10) diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 4ed5481c3e7..250891e9e30 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -31,7 +31,6 @@ /* Link Definitions */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h index 1759d25f3a3..5e03a962d10 100644 --- a/include/configs/ls1046afrwy.h +++ b/include/configs/ls1046afrwy.h @@ -45,7 +45,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE /* IFC Timing Params */ #define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index e9b8ad0c0b7..c4e5f4928d2 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -123,7 +123,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #endif #ifdef CONFIG_NAND_BOOT diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index f3904e7b3f7..ad766b034b1 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -50,7 +50,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE /* * CPLD diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 57429d4bbe3..bcba8d81c04 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -29,7 +29,6 @@ /* Link Definitions */ #define CFG_SYS_FSL_QSPI_BASE 0x20000000 -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index dc9cded49fd..49ad1469262 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -97,7 +97,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_LBMAP_SWITCH 6 diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index e2444cd8eb4..9033f6e937c 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -81,7 +81,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_BRDCFG4_OFFSET 0x54 diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index e82456fd814..bd78bdb793a 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -16,7 +16,6 @@ /* Link Definitions */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 4e6d40afbf1..7d3e8912c3b 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -98,7 +98,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #define QIXIS_LBMAP_SWITCH 0x06 #define QIXIS_LBMAP_MASK 0x0f diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 8f36958f710..4573906115e 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -95,7 +95,6 @@ #define CFG_SYS_NAND_FTIM3 0x0 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } -#define CONFIG_MTD_NAND_VERIFY_WRITE #define QIXIS_LBMAP_SWITCH 0x06 #define QIXIS_LBMAP_MASK 0x0f diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index a469c83fa4e..3347920f03f 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -13,7 +13,6 @@ #define CFG_SYS_FLASH_BASE 0x20000000 /* DDR */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL diff --git a/include/configs/malta.h b/include/configs/malta.h index 65f4b05649b..8ba04b4e6c3 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -11,8 +11,6 @@ */ #define CONFIG_MALTA -#define CONFIG_MEMSIZE_IN_BYTES - /* * CPU Configuration */ diff --git a/include/configs/mt7621.h b/include/configs/mt7621.h index 7c8c67f4469..b6e680bcc78 100644 --- a/include/configs/mt7621.h +++ b/include/configs/mt7621.h @@ -10,7 +10,6 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED 0x1c000000 #define CFG_SYS_INIT_SP_OFFSET 0x800000 diff --git a/include/configs/mt7629.h b/include/configs/mt7629.h index 99b09ad41e7..f6ab486fa29 100644 --- a/include/configs/mt7629.h +++ b/include/configs/mt7629.h @@ -15,10 +15,7 @@ /* Environment */ -/* Defines for SPL */ - -#define CONFIG_SPI_ADDR 0x30000000 -#define CFG_SYS_UBOOT_BASE (CONFIG_SPI_ADDR + CONFIG_SPL_PAD_TO) +#define CFG_SYS_UBOOT_BASE (0x30000000 + CONFIG_SPL_PAD_TO) /* SPL -> Uboot */ diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 30f27e7f0c1..32e0e06617e 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -86,9 +86,4 @@ #define CFG_SYS_NAND_BASE 0x60000000 #endif -/* SPI */ -#ifdef CONFIG_CMD_SPI -#define CONFIG_SPI_HALF_DUPLEX -#endif - #endif /* __CONFIGS_MXS_H__ */ diff --git a/include/configs/nas220.h b/include/configs/nas220.h index 1b7eb343348..85691ca94f0 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -39,16 +39,4 @@ "bootargs=console=ttyS0,115200\0" \ "autostart=no\0" -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 8 -#endif /* CONFIG_CMD_NET */ - -/* - * EFI partition - */ - #endif /* _CONFIG_NAS220_H */ diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index 62f07011809..e2ad77072cd 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -46,8 +46,4 @@ #endif /* CONFIG_SPL_BUILD */ -/* Ethernet driver configuration */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 1 - #endif /* _CONFIG_NSA310S_H */ diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h index baa452156ec..21002f99dc8 100644 --- a/include/configs/nyan-big.h +++ b/include/configs/nyan-big.h @@ -18,9 +18,6 @@ #define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 006f06e6af5..2cec20ca425 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -33,26 +33,4 @@ "x_bootcmd_usb=usb start\0" \ "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -# ifdef CONFIG_BOARD_IS_OPENRD_BASE -# define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -# else -# define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ -# endif -# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE -# define CONFIG_PHY_BASE_ADR 0x0 -# define PHY_NO "88E1121" -# else -# define CONFIG_PHY_BASE_ADR 0x8 -# define PHY_NO "88E1116" -# endif -#endif /* CONFIG_CMD_NET */ - -/* - * SATA Driver configuration - */ - #endif /* _CONFIG_OPENRD_BASE_H */ diff --git a/include/configs/origen.h b/include/configs/origen.h index 6633d541a31..a608df44e80 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -38,10 +38,4 @@ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" -/* MIU (Memory Interleaving Unit) */ -#define CONFIG_MIU_2BIT_21_7_INTERLEAVED - -#define RESERVE_BLOCK_SIZE (512) -#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ - #endif /* __CONFIG_H */ diff --git a/include/configs/p2371-0000.h b/include/configs/p2371-0000.h index ecd0405d297..653b4c583ad 100644 --- a/include/configs/p2371-0000.h +++ b/include/configs/p2371-0000.h @@ -19,9 +19,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* _P2371_0000_H */ diff --git a/include/configs/p2371-2180.h b/include/configs/p2371-2180.h index 7f942888e74..2913d5304be 100644 --- a/include/configs/p2371-2180.h +++ b/include/configs/p2371-2180.h @@ -19,9 +19,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* _P2371_2180_H */ diff --git a/include/configs/p2571.h b/include/configs/p2571.h index 50cddb4a4ac..e78e3c4d6b0 100644 --- a/include/configs/p2571.h +++ b/include/configs/p2571.h @@ -19,9 +19,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* _P2571_H */ diff --git a/include/configs/p3450-0000.h b/include/configs/p3450-0000.h index ec1a8634e71..bab02dc2d6e 100644 --- a/include/configs/p3450-0000.h +++ b/include/configs/p3450-0000.h @@ -23,9 +23,6 @@ func(PXE, pxe, na) \ func(DHCP, dhcp, na) -/* Environment at end of QSPI, in the VER partition */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #define BOARD_EXTRA_ENV_SETTINGS \ "preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then " \ "load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr; " \ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 9fd897958a4..fa08744b6fe 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -159,11 +159,6 @@ /* PSRAM */ #define PHYS_PSRAM 0x70000000 #define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */ -/* Slave EBI1, PSRAM connected */ -#define CONFIG_PSRAM_SCFG (AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY | \ - AT91_MATRIX_SCFG_FIXED_DEFMSTR(5) | \ - AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED | \ - AT91_MATRIX_SCFG_SLOT_CYCLE(255)) /* USB */ #define CFG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index 085732214e5..fc9f113dee6 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -23,10 +23,4 @@ "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ "ext2load usb 0:1 0x01100000 /uInitrd\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_POGO_E02_H */ diff --git a/include/configs/pogo_v4.h b/include/configs/pogo_v4.h index b5ce2dd13d0..239d33d8e9d 100644 --- a/include/configs/pogo_v4.h +++ b/include/configs/pogo_v4.h @@ -69,10 +69,4 @@ BOOTENV #endif /* CONFIG_SPL_BUILD */ -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_POGO_V4_H */ diff --git a/include/configs/porter.h b/include/configs/porter.h index 88fa65e0ffc..e0f77f358b9 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -21,9 +21,6 @@ #define RCAR_GEN2_SDRAM_SIZE (2048u * 1024 * 1024) #define RCAR_GEN2_UBOOT_SDRAM_SIZE (1024u * 1024 * 1024) -/* FLASH */ -#define CONFIG_SPI_FLASH_QUAD - /* SH Ether */ #define CONFIG_SH_ETHER_USE_PORT 0 #define CONFIG_SH_ETHER_PHY_ADDR 0x1 diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index d0561899586..20be4af4628 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -29,7 +29,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); /* * DDR Setup */ -#define CONFIG_VERY_BIG_RAM #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index e9cbd253824..86012adfb36 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -28,7 +28,6 @@ #define DRAM_RSV_SIZE 0x08000000 #define CFG_SYS_SDRAM_BASE (0x40000000 + DRAM_RSV_SIZE) #define CFG_SYS_SDRAM_SIZE (0x80000000u - DRAM_RSV_SIZE) -#define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED (0x80000000u - DRAM_RSV_SIZE) /* ENV setting */ diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index e4595817156..a721f27ec00 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -10,16 +10,6 @@ #define CONFIG_IRAM_BASE 0xff8c0000 -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT) -#else -/* BSS setup */ -#endif - -/* MMC/SD IP block */ -#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000 - -/* RAW SD card / eMMC locations. */ - /* FAT sd card locations. */ #define CFG_SYS_SDRAM_BASE 0 #define SDRAM_MAX_SIZE 0xf8000000 diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 19701ccce22..d7923967a72 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -21,10 +21,4 @@ "x_bootcmd_usb=usb start\0" \ "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" -/* - * Ethernet Driver configuration - */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - #endif /* _CONFIG_SHEEVAPLUG_H */ diff --git a/include/configs/silk.h b/include/configs/silk.h index 58613effaf4..6d605edf788 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -21,9 +21,6 @@ #define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024) #define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) -/* FLASH */ -#define CONFIG_SPI_FLASH_QUAD - /* SH Ether */ #define CONFIG_SH_ETHER_USE_PORT 0 #define CONFIG_SH_ETHER_PHY_ADDR 0x1 diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index 0392530c0ad..0cb70762d92 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -12,8 +12,6 @@ #include #include -#define CONFIG_SMDK5420 /* which is in a SMDK5420 */ - #define CFG_SYS_SDRAM_BASE 0x20000000 /* DRAM Memory Banks */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 601c16ea453..38de1fa9849 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -34,9 +34,6 @@ /* FLASH and environment organization */ -#define RESERVE_BLOCK_SIZE (512) -#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ - /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET #define CONFIG_ENV_SROM_BANK 1 diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h index 432144cb40c..caff0cf2523 100644 --- a/include/configs/socfpga_sr1500.h +++ b/include/configs/socfpga_sr1500.h @@ -11,15 +11,9 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */ /* Ethernet on SoC (EMAC) */ -#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII /* The PHY is autodetected, so no MII PHY address is needed here */ #define PHY_ANEG_TIMEOUT 8000 -/* Enable SPI NOR flash reset, needed for SPI booting */ -#define CONFIG_SPI_N25Q256A_RESET - -/* Environment setting for SPI flash */ - /* The rest of the configuration is shared */ #include diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 2a076716023..11d84022331 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -16,9 +16,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* High Level Configuration Options */ -#define CONFIG_SOCRATES 1 - /* * Only possible on E500 Version 2 or newer cores. */ @@ -55,7 +52,6 @@ #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM /* I2C addresses of SPD EEPROMs */ #define SPD_EEPROM_ADDRESS 0x50 /* CTLR 0 DIMM 0 */ diff --git a/include/configs/stout.h b/include/configs/stout.h index f49e88cb17c..977c0adc5f0 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -25,9 +25,6 @@ /* SCIF */ #define CONFIG_SCIF_A -/* SPI */ -#define CONFIG_SPI_FLASH_QUAD - /* SH Ether */ #define CONFIG_SH_ETHER_USE_PORT 0 #define CONFIG_SH_ETHER_PHY_ADDR 0x1 diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h index 69926890010..a2b6a1f57d7 100644 --- a/include/configs/synquacer.h +++ b/include/configs/synquacer.h @@ -14,7 +14,6 @@ #define CFG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */ #define PHYS_SDRAM_SIZE (0x7c000000) /* Default size (2GB - Secure memory) */ -#define CONFIG_VERY_BIG_RAM /* SynQuacer supports up to 64GB */ #define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE #define SQ_DRAMINFO_BASE (0x2e00ffc0) /* DRAM info from TF-A */ diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h index 09879663701..c98322cf084 100644 --- a/include/configs/tec-ng.h +++ b/include/configs/tec-ng.h @@ -16,12 +16,6 @@ #define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -/* Environment in eMMC, at the end of 2nd "boot sector" */ - -/* SPI */ -#define CONFIG_TEGRA_SLINK_CTRLS 6 -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/venice2.h b/include/configs/venice2.h index b2dc04a975a..a4eb4bf4aaf 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -20,9 +20,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ -/* SPI */ -#define CONFIG_SPI_FLASH_SIZE (4 << 20) - #include "tegra-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/vinco.h b/include/configs/vinco.h index 9f72bdde816..1c1789ac3fb 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -39,9 +39,6 @@ /* USB device */ -/* Ethernet Hardware */ -#define CONFIG_MACB_SEARCH_PHY - #ifdef CONFIG_SPI_BOOT /* bootstrap + u-boot + env + linux in serial flash */ /* Use our own mapping for the VInCo platform */ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 9bf2462010d..d71108dd318 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -10,22 +10,6 @@ #ifndef __CONFIG_X86_COMMON_H #define __CONFIG_X86_COMMON_H -/* - * High Level Configuration Options - * (easy to change) - */ - -/* Generic TPM interfaced through LPC bus */ -#define CONFIG_TPM_TIS_BASE_ADDRESS 0xfed40000 - -/*----------------------------------------------------------------------- - * Serial Configuration - */ - -/* - * Miscellaneous configurable options - */ - /*----------------------------------------------------------------------- * CPU Features */ diff --git a/include/configs/xpress.h b/include/configs/xpress.h index 3e604894ad4..9f1f2d90dbe 100644 --- a/include/configs/xpress.h +++ b/include/configs/xpress.h @@ -34,9 +34,6 @@ #define CONFIG_FEC_ENET_DEV 0 #define CONFIG_FEC_MXC_PHYADDR 0x0 -#define CONFIG_UBOOT_SECTOR_START 0x2 -#define CONFIG_UBOOT_SECTOR_COUNT 0x3fe - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -75,8 +72,8 @@ "bootz; " \ "fi;\0" \ "uboot=ccv/u-boot.imx\0" \ - "uboot_start="__stringify(CONFIG_UBOOT_SECTOR_START)"\0" \ - "uboot_size="__stringify(CONFIG_UBOOT_SECTOR_COUNT)"\0" \ + "uboot_start=0x2\0" \ + "uboot_size=0x3fe\0" \ "update_uboot=if tftp ${uboot}; then " \ "if itest ${filesize} > 0; then " \ "mmc dev 0 1;" \ From acdf89ec060931ae4c87780ab0e65a6783ccd94b Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:32 -0500 Subject: [PATCH 22/41] Convert CONFIG_KSNET_NETCP_V1_0 et al to Kconfig This converts the following to Kconfig: CONFIG_KSNET_NETCP_V1_0 CONFIG_KSNET_NETCP_V1_5 Signed-off-by: Tom Rini --- configs/k2hk_evm_defconfig | 1 + configs/k2hk_hs_evm_defconfig | 1 + drivers/net/ti/Kconfig | 13 +++++++++++++ include/configs/k2e_evm.h | 1 - include/configs/k2g_evm.h | 1 - include/configs/k2hk_evm.h | 1 - include/configs/k2l_evm.h | 1 - 7 files changed, 15 insertions(+), 4 deletions(-) diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig index b0069fd60b0..2bcf2265c7e 100644 --- a/configs/k2hk_evm_defconfig +++ b/configs/k2hk_evm_defconfig @@ -87,6 +87,7 @@ CONFIG_PHYLIB=y CONFIG_PHY_MARVELL=y CONFIG_MII=y CONFIG_DRIVER_TI_KEYSTONE_NET=y +CONFIG_KSNET_NETCP_V1_0=y CONFIG_PHY=y CONFIG_NOP_PHY=y CONFIG_KEYSTONE_USB_PHY=y diff --git a/configs/k2hk_hs_evm_defconfig b/configs/k2hk_hs_evm_defconfig index 9ca26ae61f5..94ab680343b 100644 --- a/configs/k2hk_hs_evm_defconfig +++ b/configs/k2hk_hs_evm_defconfig @@ -62,6 +62,7 @@ CONFIG_PHYLIB=y CONFIG_PHY_MARVELL=y CONFIG_MII=y CONFIG_DRIVER_TI_KEYSTONE_NET=y +CONFIG_KSNET_NETCP_V1_0=y CONFIG_PHY=y CONFIG_NOP_PHY=y CONFIG_KEYSTONE_USB_PHY=y diff --git a/drivers/net/ti/Kconfig b/drivers/net/ti/Kconfig index 59c96d862dd..e13dbc94018 100644 --- a/drivers/net/ti/Kconfig +++ b/drivers/net/ti/Kconfig @@ -25,6 +25,19 @@ config DRIVER_TI_KEYSTONE_NET help This driver supports the TI Keystone 2 Ethernet subsystem +choice + prompt "TI Keystone 2 Ethernet NETCP IP revision" + depends on DRIVER_TI_KEYSTONE_NET + default KSNET_NETCP_V1_5 + +config KSNET_NETCP_V1_0 + bool "NETCP version 1.0" + +config KSNET_NETCP_V1_5 + bool "NETCP version 1.5" + +endchoice + config TI_AM65_CPSW_NUSS bool "TI K3 AM65x MCU CPSW Nuss Ethernet controller driver" depends on ARCH_K3 diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h index 174a91c83e1..1283f450b32 100644 --- a/include/configs/k2e_evm.h +++ b/include/configs/k2e_evm.h @@ -37,7 +37,6 @@ #define SPI_MTD_PARTS KEYSTONE_SPI0_MTD_PARTS /* Network */ -#define CONFIG_KSNET_NETCP_V1_5 #define CONFIG_KSNET_CPSW_NUM_PORTS 9 #endif /* __CONFIG_K2E_EVM_H */ diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h index dc06d5943e5..fd3708ba81a 100644 --- a/include/configs/k2g_evm.h +++ b/include/configs/k2g_evm.h @@ -51,7 +51,6 @@ "name_fs=arago-base-tisdk-image-k2g-evm.cpio\0" /* Network */ -#define CONFIG_KSNET_NETCP_V1_5 #define CONFIG_KSNET_CPSW_NUM_PORTS 2 #define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */ diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 68cbe98b553..36e3c59d1c5 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -37,7 +37,6 @@ #define SPI_MTD_PARTS KEYSTONE_SPI0_MTD_PARTS /* Network */ -#define CONFIG_KSNET_NETCP_V1_0 #define CONFIG_KSNET_CPSW_NUM_PORTS 5 #endif /* __CONFIG_K2HK_EVM_H */ diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h index 5d629452bae..cb7b0367810 100644 --- a/include/configs/k2l_evm.h +++ b/include/configs/k2l_evm.h @@ -37,7 +37,6 @@ #define SPI_MTD_PARTS KEYSTONE_SPI0_MTD_PARTS /* Network */ -#define CONFIG_KSNET_NETCP_V1_5 #define CONFIG_KSNET_CPSW_NUM_PORTS 5 #endif /* __CONFIG_K2L_EVM_H */ From 960379d4501fcb64ca20810c4fc4fe74806ede7b Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:33 -0500 Subject: [PATCH 23/41] Convert CONFIG_L2_CACHE to Kconfig This converts the following to Kconfig: CONFIG_L2_CACHE Signed-off-by: Tom Rini --- arch/powerpc/cpu/mpc85xx/Kconfig | 3 +++ configs/MPC8548CDS_36BIT_defconfig | 1 + configs/MPC8548CDS_defconfig | 1 + configs/MPC8548CDS_legacy_defconfig | 1 + configs/P1010RDB-PA_36BIT_NAND_defconfig | 1 + configs/P1010RDB-PA_36BIT_NOR_defconfig | 1 + configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 1 + configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 1 + configs/P1010RDB-PA_NAND_defconfig | 1 + configs/P1010RDB-PA_NOR_defconfig | 1 + configs/P1010RDB-PA_SDCARD_defconfig | 1 + configs/P1010RDB-PA_SPIFLASH_defconfig | 1 + configs/P1010RDB-PB_36BIT_NAND_defconfig | 1 + configs/P1010RDB-PB_36BIT_NOR_defconfig | 1 + configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 1 + configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 1 + configs/P1010RDB-PB_NAND_defconfig | 1 + configs/P1010RDB-PB_NOR_defconfig | 1 + configs/P1010RDB-PB_SDCARD_defconfig | 1 + configs/P1010RDB-PB_SPIFLASH_defconfig | 1 + configs/P1020RDB-PC_36BIT_NAND_defconfig | 1 + configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 1 + configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P1020RDB-PC_36BIT_defconfig | 1 + configs/P1020RDB-PC_NAND_defconfig | 1 + configs/P1020RDB-PC_SDCARD_defconfig | 1 + configs/P1020RDB-PC_SPIFLASH_defconfig | 1 + configs/P1020RDB-PC_defconfig | 1 + configs/P1020RDB-PD_NAND_defconfig | 1 + configs/P1020RDB-PD_SDCARD_defconfig | 1 + configs/P1020RDB-PD_SPIFLASH_defconfig | 1 + configs/P1020RDB-PD_defconfig | 1 + configs/P2020RDB-PC_36BIT_NAND_defconfig | 1 + configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 1 + configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P2020RDB-PC_36BIT_defconfig | 1 + configs/P2020RDB-PC_NAND_defconfig | 1 + configs/P2020RDB-PC_SDCARD_defconfig | 1 + configs/P2020RDB-PC_SPIFLASH_defconfig | 1 + configs/P2020RDB-PC_defconfig | 1 + configs/socrates_defconfig | 1 + include/configs/MPC8548CDS.h | 5 ----- include/configs/P1010RDB.h | 5 ----- include/configs/p1_p2_rdb_pc.h | 5 ----- include/configs/socrates.h | 5 ----- 45 files changed, 43 insertions(+), 20 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 721dafc5ab1..36519613a2c 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -1297,6 +1297,9 @@ config SYS_NUM_TLBCAMS Number of TLB CAM entries for Book-E chips. 64 for E500MC, 16 for other E500 SoCs. +config L2_CACHE + bool "Enable L2 cache support" + if HETROGENOUS_CLUSTERS config SYS_MAPLE diff --git a/configs/MPC8548CDS_36BIT_defconfig b/configs/MPC8548CDS_36BIT_defconfig index 241cb80fde9..05034ce2e46 100644 --- a/configs/MPC8548CDS_36BIT_defconfig +++ b/configs/MPC8548CDS_36BIT_defconfig @@ -13,6 +13,7 @@ CONFIG_SRIO1=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8548CDS=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_USE_UBOOTPATH=y CONFIG_UBOOTPATH="8548cds/u-boot.bin" diff --git a/configs/MPC8548CDS_defconfig b/configs/MPC8548CDS_defconfig index 5af056bd4f4..965c37e45ec 100644 --- a/configs/MPC8548CDS_defconfig +++ b/configs/MPC8548CDS_defconfig @@ -13,6 +13,7 @@ CONFIG_SRIO1=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8548CDS=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_USE_UBOOTPATH=y CONFIG_UBOOTPATH="8548cds/u-boot.bin" diff --git a/configs/MPC8548CDS_legacy_defconfig b/configs/MPC8548CDS_legacy_defconfig index 34d1938129f..004175c8048 100644 --- a/configs/MPC8548CDS_legacy_defconfig +++ b/configs/MPC8548CDS_legacy_defconfig @@ -13,6 +13,7 @@ CONFIG_SRIO1=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_MPC8548CDS=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_TARGET_MPC8548CDS_LEGACY=y CONFIG_USE_UBOOTPATH=y diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig index 3fb993e201c..c12948ae7c8 100644 --- a/configs/P1010RDB-PA_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig @@ -16,6 +16,7 @@ CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PA=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1010RDB-PA_36BIT_NOR_defconfig b/configs/P1010RDB-PA_36BIT_NOR_defconfig index dc6dd717df9..6a320713ebd 100644 --- a/configs/P1010RDB-PA_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PA_36BIT_NOR_defconfig @@ -9,6 +9,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PA=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_USE_UBOOTPATH=y diff --git a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig index bc29526f636..e3b786d4efd 100644 --- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig @@ -14,6 +14,7 @@ CONFIG_SPL=y CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PA=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig index 5c42d5ee367..e6ce59e2971 100644 --- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig @@ -16,6 +16,7 @@ CONFIG_SPL_SPI=y CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PA=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig index b6e68d27885..99b94a061df 100644 --- a/configs/P1010RDB-PA_NAND_defconfig +++ b/configs/P1010RDB-PA_NAND_defconfig @@ -16,6 +16,7 @@ CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PA=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig index fe24faa1757..071123362f5 100644 --- a/configs/P1010RDB-PA_NOR_defconfig +++ b/configs/P1010RDB-PA_NOR_defconfig @@ -9,6 +9,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PA=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_USE_UBOOTPATH=y diff --git a/configs/P1010RDB-PA_SDCARD_defconfig b/configs/P1010RDB-PA_SDCARD_defconfig index 110a9b4ad3d..9f2afcdadc9 100644 --- a/configs/P1010RDB-PA_SDCARD_defconfig +++ b/configs/P1010RDB-PA_SDCARD_defconfig @@ -14,6 +14,7 @@ CONFIG_SPL=y CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PA=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1010RDB-PA_SPIFLASH_defconfig b/configs/P1010RDB-PA_SPIFLASH_defconfig index fcd60f7a4ef..7c64fdcf6f0 100644 --- a/configs/P1010RDB-PA_SPIFLASH_defconfig +++ b/configs/P1010RDB-PA_SPIFLASH_defconfig @@ -16,6 +16,7 @@ CONFIG_SPL_SPI=y CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PA=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig index 76919c3881f..87953b8f190 100644 --- a/configs/P1010RDB-PB_36BIT_NAND_defconfig +++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig @@ -16,6 +16,7 @@ CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PB=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1010RDB-PB_36BIT_NOR_defconfig b/configs/P1010RDB-PB_36BIT_NOR_defconfig index b2972586946..bf7078015e2 100644 --- a/configs/P1010RDB-PB_36BIT_NOR_defconfig +++ b/configs/P1010RDB-PB_36BIT_NOR_defconfig @@ -9,6 +9,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_USE_UBOOTPATH=y diff --git a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig index df80488cff1..4dbf8695e4e 100644 --- a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig +++ b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig @@ -14,6 +14,7 @@ CONFIG_SPL=y CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PB=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig index d27ea17a0b6..f5bcffbd490 100644 --- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig @@ -16,6 +16,7 @@ CONFIG_SPL_SPI=y CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PB=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig index 88de4f9b92e..82f29bed54e 100644 --- a/configs/P1010RDB-PB_NAND_defconfig +++ b/configs/P1010RDB-PB_NAND_defconfig @@ -16,6 +16,7 @@ CONFIG_TPL_MAX_SIZE=0x20000 CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PB=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1010RDB-PB_NOR_defconfig b/configs/P1010RDB-PB_NOR_defconfig index 2e86aec5958..985243cebd8 100644 --- a/configs/P1010RDB-PB_NOR_defconfig +++ b/configs/P1010RDB-PB_NOR_defconfig @@ -9,6 +9,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_USE_UBOOTPATH=y diff --git a/configs/P1010RDB-PB_SDCARD_defconfig b/configs/P1010RDB-PB_SDCARD_defconfig index d5bbd6dca54..3dfb509c8ad 100644 --- a/configs/P1010RDB-PB_SDCARD_defconfig +++ b/configs/P1010RDB-PB_SDCARD_defconfig @@ -14,6 +14,7 @@ CONFIG_SPL=y CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PB=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1010RDB-PB_SPIFLASH_defconfig b/configs/P1010RDB-PB_SPIFLASH_defconfig index 66efe739e99..f3d399f84f7 100644 --- a/configs/P1010RDB-PB_SPIFLASH_defconfig +++ b/configs/P1010RDB-PB_SPIFLASH_defconfig @@ -16,6 +16,7 @@ CONFIG_SPL_SPI=y CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y CONFIG_TARGET_P1010RDB_PB=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig index 0f082f6e6e2..de04556b224 100644 --- a/configs/P1020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig @@ -16,6 +16,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig index 88e10af29a3..2d201bf55e9 100644 --- a/configs/P1020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P1020RDB-PC_36BIT_SDCARD_defconfig @@ -14,6 +14,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig index 729e93eae23..a6b7a4abf50 100644 --- a/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig @@ -16,6 +16,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1020RDB-PC_36BIT_defconfig b/configs/P1020RDB-PC_36BIT_defconfig index 2860c286d71..58f24755714 100644 --- a/configs/P1020RDB-PC_36BIT_defconfig +++ b/configs/P1020RDB-PC_36BIT_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_USE_UBOOTPATH=y diff --git a/configs/P1020RDB-PC_NAND_defconfig b/configs/P1020RDB-PC_NAND_defconfig index 0958a0a94b5..cf47bd49c7a 100644 --- a/configs/P1020RDB-PC_NAND_defconfig +++ b/configs/P1020RDB-PC_NAND_defconfig @@ -16,6 +16,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1020RDB-PC_SDCARD_defconfig b/configs/P1020RDB-PC_SDCARD_defconfig index 81bb26cb8fd..3a86a9ef525 100644 --- a/configs/P1020RDB-PC_SDCARD_defconfig +++ b/configs/P1020RDB-PC_SDCARD_defconfig @@ -14,6 +14,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1020RDB-PC_SPIFLASH_defconfig b/configs/P1020RDB-PC_SPIFLASH_defconfig index 481009f3076..9fe2b1d88f5 100644 --- a/configs/P1020RDB-PC_SPIFLASH_defconfig +++ b/configs/P1020RDB-PC_SPIFLASH_defconfig @@ -16,6 +16,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1020RDB-PC_defconfig b/configs/P1020RDB-PC_defconfig index 49207eb65a0..17bde92263b 100644 --- a/configs/P1020RDB-PC_defconfig +++ b/configs/P1020RDB-PC_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PC=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_USE_UBOOTPATH=y diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig index 7e22b4e34c5..2f768c06705 100644 --- a/configs/P1020RDB-PD_NAND_defconfig +++ b/configs/P1020RDB-PD_NAND_defconfig @@ -16,6 +16,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PD=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1020RDB-PD_SDCARD_defconfig b/configs/P1020RDB-PD_SDCARD_defconfig index 62b25f03983..6cb3be08dc2 100644 --- a/configs/P1020RDB-PD_SDCARD_defconfig +++ b/configs/P1020RDB-PD_SDCARD_defconfig @@ -14,6 +14,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PD=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1020RDB-PD_SPIFLASH_defconfig b/configs/P1020RDB-PD_SPIFLASH_defconfig index f5864dea4db..0eb2b3ab74b 100644 --- a/configs/P1020RDB-PD_SPIFLASH_defconfig +++ b/configs/P1020RDB-PD_SPIFLASH_defconfig @@ -16,6 +16,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PD=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig index ca040072884..b0ccaa1cfde 100644 --- a/configs/P1020RDB-PD_defconfig +++ b/configs/P1020RDB-PD_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P1020RDB_PD=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_USE_UBOOTPATH=y diff --git a/configs/P2020RDB-PC_36BIT_NAND_defconfig b/configs/P2020RDB-PC_36BIT_NAND_defconfig index 2420217b890..c53c4c6c7cc 100644 --- a/configs/P2020RDB-PC_36BIT_NAND_defconfig +++ b/configs/P2020RDB-PC_36BIT_NAND_defconfig @@ -16,6 +16,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig index 22b0023ec6c..0ac74287fde 100644 --- a/configs/P2020RDB-PC_36BIT_SDCARD_defconfig +++ b/configs/P2020RDB-PC_36BIT_SDCARD_defconfig @@ -14,6 +14,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig index 8c95203a4a0..9da9ef0c691 100644 --- a/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig @@ -16,6 +16,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P2020RDB-PC_36BIT_defconfig b/configs/P2020RDB-PC_36BIT_defconfig index b87c965d50b..bb5df66c749 100644 --- a/configs/P2020RDB-PC_36BIT_defconfig +++ b/configs/P2020RDB-PC_36BIT_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_USE_UBOOTPATH=y diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig index 1d33cf6750b..4758e0e3715 100644 --- a/configs/P2020RDB-PC_NAND_defconfig +++ b/configs/P2020RDB-PC_NAND_defconfig @@ -16,6 +16,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P2020RDB-PC_SDCARD_defconfig b/configs/P2020RDB-PC_SDCARD_defconfig index 8d44e5b425c..1584a8a7c3a 100644 --- a/configs/P2020RDB-PC_SDCARD_defconfig +++ b/configs/P2020RDB-PC_SDCARD_defconfig @@ -14,6 +14,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P2020RDB-PC_SPIFLASH_defconfig b/configs/P2020RDB-PC_SPIFLASH_defconfig index 9155768c15c..6acb0bcb12e 100644 --- a/configs/P2020RDB-PC_SPIFLASH_defconfig +++ b/configs/P2020RDB-PC_SPIFLASH_defconfig @@ -16,6 +16,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y diff --git a/configs/P2020RDB-PC_defconfig b/configs/P2020RDB-PC_defconfig index 4f3be9eb242..2afef4a5eb0 100644 --- a/configs/P2020RDB-PC_defconfig +++ b/configs/P2020RDB-PC_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_P2020RDB=y CONFIG_MPC85XX_HAVE_RESET_VECTOR=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MPC85XX_NO_RESETVEC=y CONFIG_USE_UBOOTPATH=y diff --git a/configs/socrates_defconfig b/configs/socrates_defconfig index 4cc50d35589..46be662037e 100644 --- a/configs/socrates_defconfig +++ b/configs/socrates_defconfig @@ -10,6 +10,7 @@ CONFIG_MPC85xx=y CONFIG_SYS_INIT_RAM_LOCK=y # CONFIG_CMD_ERRATA is not set CONFIG_TARGET_SOCRATES=y +CONFIG_L2_CACHE=y CONFIG_ENABLE_36BIT_PHYS=y CONFIG_SYS_MONITOR_LEN=393216 CONFIG_FIT=y diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 1f1eacdb691..3d0c2192ee1 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -17,11 +17,6 @@ #include #endif -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ - /* * Only possible on E500 Version 2 or newer cores. */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 02d49c3d340..c398ece7845 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -95,11 +95,6 @@ #endif #endif -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ - /* DDR Setup */ #define SPD_EEPROM_ADDRESS 0x52 diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index ee25990b034..c05904a813d 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -109,11 +109,6 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc #endif -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE - #define CFG_SYS_CCSRBAR 0xffe00000 #define CFG_SYS_CCSRBAR_PHYS_LOW CFG_SYS_CCSRBAR diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 11d84022331..0547ed02563 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -34,11 +34,6 @@ * in the README.mpc85xxads. */ -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ - #define CFG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ #undef CFG_SYS_DRAM_TEST /* memory test, takes time */ From 2cc61a631bb8ae1acfadac9840abaa803091b7ac Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:34 -0500 Subject: [PATCH 24/41] malta: Rename CONFIG_MALTA to CONFIG_TARGET_MALTA Fixup this last remnant of CONFIG_MALTA. Cc: Paul Burton Signed-off-by: Tom Rini --- drivers/rtc/mc146818.c | 2 +- include/configs/malta.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c index 122691b9784..03ce081d576 100644 --- a/drivers/rtc/mc146818.c +++ b/drivers/rtc/mc146818.c @@ -13,7 +13,7 @@ #include #include -#if defined(CONFIG_X86) || defined(CONFIG_MALTA) +#if defined(CONFIG_X86) || defined(CONFIG_TARGET_MALTA) #include #define in8(p) inb(p) #define out8(p, v) outb(v, p) diff --git a/include/configs/malta.h b/include/configs/malta.h index 8ba04b4e6c3..c17a4a4a8e5 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -9,7 +9,6 @@ /* * System configuration */ -#define CONFIG_MALTA /* * CPU Configuration From 829e9d223657f5779668bb7a46e902a85e09b664 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:35 -0500 Subject: [PATCH 25/41] ddr: fsl: Remove CONFIG_MEM_INIT_VALUE The way all of the memory init code here works is that we pass 0xDEADBEEF around for the initial value (as it's a well known 'poison' value and so easily recognized in debuggers, etc). The only point of this CONFIG symbol was to pass in a different value for that purpose. Drop this symbol and cleanup the code slightly. Signed-off-by: Tom Rini --- arch/powerpc/include/asm/fsl_dma.h | 2 +- drivers/ddr/fsl/ctrl_regs.c | 17 ++--------------- drivers/ddr/fsl/mpc85xx_ddr_gen1.c | 2 +- drivers/dma/fsl_dma.c | 4 ++-- include/configs/MPC8548CDS.h | 2 -- include/configs/P1010RDB.h | 2 -- include/configs/T102xRDB.h | 3 --- include/configs/T104xRDB.h | 3 --- include/configs/T208xQDS.h | 7 ------- include/configs/T208xRDB.h | 7 ------- include/configs/T4240RDB.h | 7 ------- include/configs/kontron_sl28.h | 3 --- include/configs/ls1021aqds.h | 4 ---- include/configs/ls1043aqds.h | 4 ---- include/configs/ls1043ardb.h | 6 ------ include/configs/ls1046aqds.h | 4 ---- include/configs/ls1046ardb.h | 2 -- include/configs/ls1088aqds.h | 1 - include/configs/ls1088ardb.h | 1 - include/configs/ls2080aqds.h | 1 - include/configs/ls2080ardb.h | 1 - include/configs/lx2160a_common.h | 1 - include/configs/socrates.h | 3 --- 23 files changed, 6 insertions(+), 81 deletions(-) diff --git a/arch/powerpc/include/asm/fsl_dma.h b/arch/powerpc/include/asm/fsl_dma.h index 727f4a7e92c..1459db74bee 100644 --- a/arch/powerpc/include/asm/fsl_dma.h +++ b/arch/powerpc/include/asm/fsl_dma.h @@ -117,7 +117,7 @@ typedef struct fsl_dma { void dma_init(void); int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t n); #if (defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)) -void dma_meminit(uint val, uint size); +void dma_meminit(uint size); #endif #endif diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index df7ec484651..759921bc582 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -938,7 +938,7 @@ static void set_ddr_sdram_cfg_2(const unsigned int ctrl_num, #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* Use the DDR controller to auto initialize memory. */ d_init = popts->ecc_init_using_memctl; - ddr->ddr_data_init = CONFIG_MEM_INIT_VALUE; + ddr->ddr_data_init = 0xDEADBEEF; debug("DDR: ddr_data_init = 0x%08x\n", ddr->ddr_data_init); #else /* Memory will be initialized via DMA, or not at all. */ @@ -1842,19 +1842,6 @@ static void set_ddr_sdram_mode(const unsigned int ctrl_num, } #endif -/* DDR SDRAM Data Initialization (DDR_DATA_INIT) */ -static void set_ddr_data_init(fsl_ddr_cfg_regs_t *ddr) -{ - unsigned int init_value; /* Initialization value */ - -#ifdef CONFIG_MEM_INIT_VALUE - init_value = CONFIG_MEM_INIT_VALUE; -#else - init_value = 0xDEADBEEF; -#endif - ddr->ddr_data_init = init_value; -} - /* * DDR SDRAM Clock Control (DDR_SDRAM_CLK_CNTL) * The old controller on the 8540/60 doesn't have this register. @@ -2537,7 +2524,7 @@ compute_fsl_memctl_config_regs(const unsigned int ctrl_num, set_ddr_sdram_rcw(ctrl_num, ddr, popts, common_dimm); set_ddr_sdram_interval(ctrl_num, ddr, popts, common_dimm); - set_ddr_data_init(ddr); + ddr->ddr_data_init = 0xDEADBEEF; set_ddr_sdram_clk_cntl(ddr, popts); set_ddr_init_addr(ddr); set_ddr_init_ext_addr(ddr); diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen1.c b/drivers/ddr/fsl/mpc85xx_ddr_gen1.c index 0f1e99eeb03..16186bdbae7 100644 --- a/drivers/ddr/fsl/mpc85xx_ddr_gen1.c +++ b/drivers/ddr/fsl/mpc85xx_ddr_gen1.c @@ -73,7 +73,7 @@ ddr_enable_ecc(unsigned int dram_size) struct ccsr_ddr __iomem *ddr = (struct ccsr_ddr __iomem *)(CFG_SYS_FSL_DDR_ADDR); - dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); + dma_meminit(dram_size); /* * Enable errors for ECC. diff --git a/drivers/dma/fsl_dma.c b/drivers/dma/fsl_dma.c index cd78e45d888..700df2236bd 100644 --- a/drivers/dma/fsl_dma.c +++ b/drivers/dma/fsl_dma.c @@ -133,7 +133,7 @@ int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) { */ #if ((!defined CONFIG_MPC83xx && defined(CONFIG_DDR_ECC) && \ !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER))) -void dma_meminit(uint val, uint size) +void dma_meminit(uint size) { uint *p = 0; uint i = 0; @@ -142,7 +142,7 @@ void dma_meminit(uint val, uint size) if (((uint)p & 0x1f) == 0) ppcDcbz((ulong)p); - *p = (uint)CONFIG_MEM_INIT_VALUE; + *p = (uint)0xDEADBEEF; if (((uint)p & 0x1c) == 0x1c) ppcDcbf((ulong)p); diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 3d0c2192ee1..1e3ba6de6e7 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -26,8 +26,6 @@ /* DDR Setup */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index c398ece7845..2267a7a9c8b 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -98,8 +98,6 @@ /* DDR Setup */ #define SPD_EEPROM_ADDRESS 0x52 -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - #ifndef __ASSEMBLY__ extern unsigned long get_sdram_size(void); #endif diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 4b443c75042..4794c5a84d1 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -94,9 +94,6 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CFG_SYS_INIT_L2CSR0 L2CSR0_L2E -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif /* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index dfad76e16f1..5bdc2105f56 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -64,9 +64,6 @@ * These can be toggled for performance analysis, otherwise use default. */ #define CFG_SYS_INIT_L2CSR0 L2CSR0_L2E -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif /* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 24c1daf9985..4b6bdaa3440 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -59,13 +59,6 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc #endif -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - /* * Config the L3 Cache as L3 SRAM */ diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index c825e7fa0c6..fab40f792af 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -59,13 +59,6 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc #endif -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - /* * Config the L3 Cache as L3 SRAM */ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 95735f3fcb1..41565f284c6 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -40,13 +40,6 @@ #define CFG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - /* * Config the L3 Cache as L3 SRAM */ diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index f7bb97aa0e6..a073a06c827 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -15,9 +15,6 @@ #undef CFG_SYS_MEM_RESERVE_SECURE #endif -/* DDR */ -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef - #define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index e49588489c1..fead9edeccd 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -22,10 +22,6 @@ #define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - /* * IFC Definitions */ diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index 1dca7f0aa6b..7ccbb20bf2e 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -12,10 +12,6 @@ #define SPD_EEPROM_ADDRESS 0x51 -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - #ifdef CONFIG_SYS_DPAA_FMAN #define RGMII_PHY1_ADDR 0x1 #define RGMII_PHY2_ADDR 0x2 diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 043904197f0..c8a6f0146aa 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -9,12 +9,6 @@ #include "ls1043a_common.h" -/* Physical Memory Map */ - -#ifndef CONFIG_SPL -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - /* * NOR Flash Definitions */ diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index c4e5f4928d2..4b4bd7cbe48 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -12,10 +12,6 @@ #define SPD_EEPROM_ADDRESS 0x51 -#ifdef CONFIG_DDR_ECC -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#endif - #ifdef CONFIG_SYS_DPAA_FMAN #define RGMII_PHY1_ADDR 0x1 #define RGMII_PHY2_ADDR 0x2 diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index ad766b034b1..0e42a51fc59 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -13,8 +13,6 @@ #define SPD_EEPROM_ADDRESS 0x51 -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef - #if defined(CONFIG_QSPI_BOOT) #define CFG_SYS_UBOOT_BASE 0x40100000 #endif diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 49ad1469262..3391540c6e3 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -14,7 +14,6 @@ #define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS 0x51 diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 9033f6e937c..1ddf0687f43 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -15,7 +15,6 @@ #define COUNTER_FREQUENCY_REAL 25000000 /* 25MHz */ -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS 0x51 diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 7d3e8912c3b..4a52fcdfddb 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -16,7 +16,6 @@ #define CFG_SYS_I2C_FPGA_ADDR 0x66 #define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 #define SPD_EEPROM_ADDRESS3 0x53 diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 4573906115e..b8ab501c98e 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -21,7 +21,6 @@ #define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 #define SPD_EEPROM_ADDRESS3 0x53 diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 3347920f03f..c1a98fd3e4c 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -18,7 +18,6 @@ #define CFG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL #define CFG_SYS_SDRAM_SIZE 0x200000000UL #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 #define SPD_EEPROM_ADDRESS3 0x53 diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 0547ed02563..4c752091fb5 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -42,9 +42,6 @@ #define CFG_SYS_CCSRBAR_PHYS_LOW CFG_SYS_CCSRBAR /* DDR Setup */ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - #define CFG_SYS_DDR_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE From e52fca2236153341c495bff3c5631fcced291ffe Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:36 -0500 Subject: [PATCH 26/41] Convert CONFIG_MONITOR_IS_IN_RAM to Kconfig This converts the following to Kconfig: CONFIG_MONITOR_IS_IN_RAM As part of this, reword some of the documentation slightly to reflect that this is in Kconfig and not a define now. Signed-off-by: Tom Rini --- arch/Kconfig | 4 ++++ board/cobra5272/README | 27 +++++++++------------------ configs/10m50_defconfig | 1 + configs/3c120_defconfig | 1 + doc/arch/m68k.rst | 4 ++-- include/configs/10m50_devboard.h | 1 - include/configs/3c120_devboard.h | 1 - include/configs/M5249EVB.h | 2 -- include/configs/M5272C3.h | 2 -- include/configs/M5282EVB.h | 2 -- include/configs/astro_mcf5373l.h | 25 ------------------------- include/configs/cobra5272.h | 21 --------------------- include/configs/eb_cpu5282.h | 2 -- 13 files changed, 17 insertions(+), 76 deletions(-) diff --git a/arch/Kconfig b/arch/Kconfig index 5ffbdc6a3f7..5f2b72f5350 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -380,6 +380,10 @@ config SYS_IMMR Address for the Internal Memory-Mapped Registers (IMMR) window used to configure the features of many Freescale / NXP SoCs. +config MONITOR_IS_IN_RAM + bool "U-Boot is loaded in to RAM by a pre-loader" + depends on M68K || NIOS2 + config SKIP_LOWLEVEL_INIT bool "Skip the calls to certain low level initialization functions" depends on ARM || MIPS || RISCV diff --git a/board/cobra5272/README b/board/cobra5272/README index ac62e557a07..11abcfacdb6 100644 --- a/board/cobra5272/README +++ b/board/cobra5272/README @@ -77,21 +77,16 @@ in dir ./u-boot-x-x-x/ please first check: - in ./include/configs/cobra5272.h + in ./configs/cobra5272_defconfig - CONFIG_MONITOR_IS_IN_RAM has to be undefined, e. g. as follows: - - #if 0 - #define CONFIG_MONITOR_IS_IN_RAM - /* define if monitor is started from a pre-loader */ - #endif + CONFIG_MONITOR_IS_IN_RAM has to be not present in the file => u-boot as single bootloader starting from flash - in board/cobra5272/config.mk CONFIG_TEXT_BASE should be + in configs/cobra5272_defconfig CONFIG_TEXT_BASE should be - CONFIG_TEXT_BASE = 0xffe00000 + CONFIG_TEXT_BASE=0xffe00000 => linking address for u-boot as single bootloader stored in flash @@ -115,22 +110,18 @@ in dir ./u-boot-x-x-x/ host> make distclean please modify the settings: + in ./configs/cobra5272_defconfig - in ./include/configs/cobra5272.h + CONFIG_MONITOR_IS_IN_RAM now has to be enabled, e. g. as follows: - CONFIG_MONITOR_IS_IN_RAM now has to be defined, e. g. as follows: - - #if 1 - #define CONFIG_MONITOR_IS_IN_RAM - /*define if monitor is started from a pre-loader */ - #endif + CONFIG_MONITOR_IS_IN_RAM=y => u-boot as RAM version, chainloaded by another bootloader or using bdm cable - in board/cobra5272/config.mk CONFIG_TEXT_BASE should be + in configs/cobra5272_defconfig CONFIG_TEXT_BASE should be - CONFIG_TEXT_BASE = 0x00020000 + CONFIG_TEXT_BASE=0x00020000 => target linking address for RAM diff --git a/configs/10m50_defconfig b/configs/10m50_defconfig index 28966e0d0a4..7dc9d2ed27b 100644 --- a/configs/10m50_defconfig +++ b/configs/10m50_defconfig @@ -1,5 +1,6 @@ CONFIG_NIOS2=y CONFIG_SYS_CONFIG_NAME="10m50_devboard" +CONFIG_MONITOR_IS_IN_RAM=y CONFIG_SYS_MALLOC_LEN=0x20000 CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_NR_DRAM_BANKS=1 diff --git a/configs/3c120_defconfig b/configs/3c120_defconfig index 8c421f099be..46dfaf827ac 100644 --- a/configs/3c120_defconfig +++ b/configs/3c120_defconfig @@ -1,5 +1,6 @@ CONFIG_NIOS2=y CONFIG_SYS_CONFIG_NAME="3c120_devboard" +CONFIG_MONITOR_IS_IN_RAM=y CONFIG_SYS_MALLOC_LEN=0x20000 CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_NR_DRAM_BANKS=1 diff --git a/doc/arch/m68k.rst b/doc/arch/m68k.rst index 770327fea21..a9180fd7850 100644 --- a/doc/arch/m68k.rst +++ b/doc/arch/m68k.rst @@ -93,10 +93,10 @@ Configuration to use a pre-loader ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If U-Boot should be loaded to RAM and started by a pre-loader -CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the +CONFIG_MONITOR_IS_IN_RAM must be enabled. If it is enabled the initial vector table and basic processor initialization will not be compiled in. The start address of U-Boot must be adjusted in -the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile +the boards defconfig file (CONFIG_SYS_MONITOR_BASE) and Makefile (CONFIG_TEXT_BASE) to the load address. ColdFire CPU specific options/settings diff --git a/include/configs/10m50_devboard.h b/include/configs/10m50_devboard.h index 3a4fbc6eab8..b898ec0cc3e 100644 --- a/include/configs/10m50_devboard.h +++ b/include/configs/10m50_devboard.h @@ -32,6 +32,5 @@ */ #define CFG_SYS_SDRAM_BASE 0xc8000000 #define CFG_SYS_SDRAM_SIZE 0x08000000 -#define CONFIG_MONITOR_IS_IN_RAM #endif /* __CONFIG_H */ diff --git a/include/configs/3c120_devboard.h b/include/configs/3c120_devboard.h index ab889180eed..e67338c202c 100644 --- a/include/configs/3c120_devboard.h +++ b/include/configs/3c120_devboard.h @@ -28,6 +28,5 @@ */ #define CFG_SYS_SDRAM_BASE 0xD0000000 #define CFG_SYS_SDRAM_SIZE 0x08000000 -#define CONFIG_MONITOR_IS_IN_RAM #endif /* __CONFIG_H */ diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 0e38eeb4a36..c71130909fc 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -20,8 +20,6 @@ #define CFG_SYS_UART_PORT (0) -#undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ - /* * Clock configuration: enable only one of the following options */ diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index c58d19c810f..6aae584afda 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -19,8 +19,6 @@ #define CFG_SYS_UART_PORT (0) -#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ - /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index e23439fd782..7cfe7a2da3e 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -19,8 +19,6 @@ #define CFG_SYS_UART_PORT (0) -#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ - /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 62aa99342a0..6aef3bd86f7 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -38,16 +38,6 @@ #error No card type defined! #endif -/* - * CONFIG_RAM defines if u-boot is loaded via BDM (or started from - * a different bootloader that has already performed RAM setup) or - * started directly from flash, which is the regular case for production - * boards. - */ -#ifdef CONFIG_RAM -#define CONFIG_MONITOR_IS_IN_RAM -#endif - /* I2C */ /* @@ -69,21 +59,6 @@ #define CFG_SYS_UART_PORT (2) #define CFG_SYS_UART2_ALT3_GPIO -/* - * Configuration for environment - * Environment is located in the last sector of the flash - */ - -#ifndef CONFIG_MONITOR_IS_IN_RAM -#else -/* - * environment in RAM - This is used to use a single PC-based application - * to load an image, load U-Boot, load an environment and then start U-Boot - * to execute the commands from the environment. Feedback is done via setting - * and reading memory locations. - */ -#endif - /* here we put our FPGA configuration... */ /* Define user parameters that have to be customized most likely */ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 8c83c3ac06a..cd50ffe98d0 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -42,27 +42,6 @@ #define CFG_SYS_UART_PORT (0) -/* --- - * CONFIG_MONITOR_IS_IN_RAM defines if u-boot is started from a different - * bootloader residing in flash ('chainloading'); if you want to use - * chainloading or want to compile a u-boot binary that can be loaded into - * RAM via BDM set - * "#if 0" to "#if 1" - * You will need a first stage bootloader then, e. g. colilo or a working BDM - * cable (Background Debug Mode) - * - * Setting #if 0: u-boot will start from flash and relocate itself to RAM - * - * Please do not forget to modify the setting of CONFIG_TEXT_BASE - * in board/cobra5272/config.mk accordingly (#if 0: 0xffe00000; #if 1: 0x20000) - * - * --- - */ - -#if 0 -#define CONFIG_MONITOR_IS_IN_RAM /* monitor is started from a preloader */ -#endif - /* --- * Configuration for environment * Environment is embedded in u-boot in the second sector of the flash diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 029f13dad36..b267b74b159 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -14,8 +14,6 @@ #define CFG_SYS_UART_PORT (0) -#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */ - /*----------------------------------------------------------------------* * Options * *----------------------------------------------------------------------*/ From 71894173bb15fffacb166bdc04168a0fcb86cbbf Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:37 -0500 Subject: [PATCH 27/41] Convert CONFIG_MXC_NAND_HWECC to Kconfig This converts the following to Kconfig: CONFIG_MXC_NAND_HWECC Signed-off-by: Tom Rini --- configs/m53menlo_defconfig | 1 + drivers/mtd/nand/raw/Kconfig | 4 ++++ include/configs/m53menlo.h | 1 - 3 files changed, 5 insertions(+), 1 deletion(-) diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig index b70d10433d7..70df2b5fd24 100644 --- a/configs/m53menlo_defconfig +++ b/configs/m53menlo_defconfig @@ -88,6 +88,7 @@ CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_USE_FLASH_BBT=y CONFIG_NAND_MXC=y +CONFIG_MXC_NAND_HWECC=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_PAGE_COUNT=0x40 CONFIG_SYS_NAND_PAGE_SIZE=0x800 diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 25b829f11cd..1e4e5c92067 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -479,6 +479,10 @@ config SYS_NAND_SIZE depends on NAND_MXC && SPL_NAND_SUPPORT default 268435456 +config MXC_NAND_HWECC + bool "Hardware ECC support in MXC NAND" + depends on NAND_MXC + config NAND_MXS bool "MXS NAND support" depends on MX23 || MX28 || MX6 || MX7 || IMX8 || IMX8M diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h index 189b2113f75..d42ad9acb40 100644 --- a/include/configs/m53menlo.h +++ b/include/configs/m53menlo.h @@ -48,7 +48,6 @@ #define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI #define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR #define CFG_SYS_NAND_LARGEPAGE -#define CONFIG_MXC_NAND_HWECC #endif /* From 3348c6b6a5cbf71bde837bf80cf962ee6aaeff20 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:38 -0500 Subject: [PATCH 28/41] etamin: Rework CONFIG_NAND_CS_INIT Enable this in the board Kconfig file, but then check for it via CONFIG_IS_ENABLED so that it will only be true in the non-SPL case, as is done today. As part of this we move some defines local to where they are used as it's board specific. Cc: Samuel Egli Signed-off-by: Tom Rini --- board/siemens/common/board.c | 2 +- board/siemens/draco/Kconfig | 2 ++ board/siemens/draco/board.c | 9 ++++++++- include/configs/etamin.h | 12 +----------- 4 files changed, 12 insertions(+), 13 deletions(-) diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c index 2efede62aa5..8fa9197a6df 100644 --- a/board/siemens/common/board.c +++ b/board/siemens/common/board.c @@ -93,7 +93,7 @@ int board_init(void) gpmc_init(); -#ifdef CONFIG_NAND_CS_INIT +#if CONFIG_IS_ENABLED(NAND_CS_INIT) board_nand_cs_init(); #endif diff --git a/board/siemens/draco/Kconfig b/board/siemens/draco/Kconfig index a699c7d46f7..1eb8a4886f4 100644 --- a/board/siemens/draco/Kconfig +++ b/board/siemens/draco/Kconfig @@ -60,4 +60,6 @@ config SYS_SOC config SYS_CONFIG_NAME default "etamin" +config NAND_CS_INIT + def_bool y endif diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c index f898bba4b0e..8874659013f 100644 --- a/board/siemens/draco/board.c +++ b/board/siemens/draco/board.c @@ -370,7 +370,14 @@ U_BOOT_CMD( #endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */ #endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ -#ifdef CONFIG_NAND_CS_INIT +#if CONFIG_IS_ENABLED(NAND_CS_INIT) +#define ETAMIN_NAND_GPMC_CONFIG1 0x00000800 +#define ETAMIN_NAND_GPMC_CONFIG2 0x001e1e00 +#define ETAMIN_NAND_GPMC_CONFIG3 0x001e1e00 +#define ETAMIN_NAND_GPMC_CONFIG4 0x16051807 +#define ETAMIN_NAND_GPMC_CONFIG5 0x00151e1e +#define ETAMIN_NAND_GPMC_CONFIG6 0x16000f80 + /* GPMC definitions for second nand cs1 */ static const u32 gpmc_nand_config[] = { ETAMIN_NAND_GPMC_CONFIG1, diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 6647148c96f..811c7cb9618 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -127,16 +127,6 @@ "bootm ${kloadaddr} - ${loadaddr}\0" \ COMMON_ENV_NAND_CMDS -#ifndef CONFIG_SPL_BUILD - -#define CONFIG_NAND_CS_INIT -#define ETAMIN_NAND_GPMC_CONFIG1 0x00000800 -#define ETAMIN_NAND_GPMC_CONFIG2 0x001e1e00 -#define ETAMIN_NAND_GPMC_CONFIG3 0x001e1e00 -#define ETAMIN_NAND_GPMC_CONFIG4 0x16051807 -#define ETAMIN_NAND_GPMC_CONFIG5 0x00151e1e -#define ETAMIN_NAND_GPMC_CONFIG6 0x16000f80 - /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=etamin\0" \ @@ -147,5 +137,5 @@ CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ CONFIG_ENV_SETTINGS_V2 \ CONFIG_ENV_SETTINGS_NAND_V2 -#endif /* CONFIG_SPL_BUILD */ + #endif /* ! __CONFIG_ETAMIN_H */ From 0a69d6afcab9b2fa364cd78aa67340185c5f75a0 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:39 -0500 Subject: [PATCH 29/41] Convert CONFIG_OVERWRITE_ETHADDR_ONCE to Kconfig This converts the following to Kconfig: CONFIG_OVERWRITE_ETHADDR_ONCE Signed-off-by: Tom Rini --- README | 7 ------- configs/M5253DEMO_defconfig | 1 + configs/M5275EVB_defconfig | 1 + configs/eb_cpu5282_defconfig | 1 + configs/eb_cpu5282_internal_defconfig | 1 + env/Kconfig | 9 +++++++++ include/configs/M5253DEMO.h | 2 -- include/configs/M5275EVB.h | 4 ---- include/configs/eb_cpu5282.h | 4 ---- 9 files changed, 13 insertions(+), 17 deletions(-) diff --git a/README b/README index 9e2627863ce..3ebee1cb375 100644 --- a/README +++ b/README @@ -1071,13 +1071,6 @@ The following options need to be configured: completely disabled. Anybody can change or delete these parameters. - Alternatively, if you define _both_ an ethaddr in the - default env _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default - Ethernet address is installed in the environment, - which can be changed exactly ONCE by the user. [The - serial# is unaffected by this, i. e. it remains - read-only.] - The same can be accomplished in a more flexible way for any variable by configuring the type of access to allow for those variables in the ".flags" variable diff --git a/configs/M5253DEMO_defconfig b/configs/M5253DEMO_defconfig index 4de6290b7d3..ea079972c9b 100644 --- a/configs/M5253DEMO_defconfig +++ b/configs/M5253DEMO_defconfig @@ -25,6 +25,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MAC_PARTITION=y +CONFIG_OVERWRITE_ETHADDR_ONCE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_HOSTNAME=y CONFIG_HOSTNAME="M5253DEMO" diff --git a/configs/M5275EVB_defconfig b/configs/M5275EVB_defconfig index 01961e5ae27..d84d9d98c5a 100644 --- a/configs/M5275EVB_defconfig +++ b/configs/M5275EVB_defconfig @@ -31,6 +31,7 @@ CONFIG_CMD_MII=y CONFIG_MII_INIT=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y +CONFIG_OVERWRITE_ETHADDR_ONCE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y CONFIG_SYS_RX_ETH_BUFFER=8 diff --git a/configs/eb_cpu5282_defconfig b/configs/eb_cpu5282_defconfig index a831c1c5d2a..7304b493872 100644 --- a/configs/eb_cpu5282_defconfig +++ b/configs/eb_cpu5282_defconfig @@ -32,6 +32,7 @@ CONFIG_BOOTP_BOOTFILESIZE=y CONFIG_CMD_MII=y CONFIG_MII_INIT=y CONFIG_CMD_DATE=y +CONFIG_OVERWRITE_ETHADDR_ONCE=y CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_SYS_I2C_LEGACY=y diff --git a/configs/eb_cpu5282_internal_defconfig b/configs/eb_cpu5282_internal_defconfig index 6a673c91811..5ecdda418aa 100644 --- a/configs/eb_cpu5282_internal_defconfig +++ b/configs/eb_cpu5282_internal_defconfig @@ -30,6 +30,7 @@ CONFIG_BOOTP_BOOTFILESIZE=y CONFIG_CMD_MII=y CONFIG_MII_INIT=y CONFIG_CMD_DATE=y +CONFIG_OVERWRITE_ETHADDR_ONCE=y CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y CONFIG_SYS_RX_ETH_BUFFER=8 CONFIG_SYS_I2C_LEGACY=y diff --git a/env/Kconfig b/env/Kconfig index c28d9e89f68..7ca992aa1d4 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -30,6 +30,15 @@ config ENV_OVERWRITE Use this to permit overriding of certain environmental variables like Ethernet and Serial +config OVERWRITE_ETHADDR_ONCE + bool "Enable overwriting ethaddr environment variables once" + depends on !ENV_OVERWRITE + help + Enable this to allow for the ethaddr environment variables to be + overwritten one time per boot, only. This allows for a default + to be installed in the environment, which can be changed exactly ONCE + by the user. + config ENV_MIN_ENTRIES int "Minimum number of entries in the environment hashtable" default 64 diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 65a7aa04086..bc156df20d5 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -20,8 +20,6 @@ env/embedded.o(.text*); #ifdef CONFIG_DRIVER_DM9000 -# define CONFIG_OVERWRITE_ETHADDR_ONCE - # define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index ff9f8535896..41974cff410 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -38,10 +38,6 @@ #define CFG_SYS_I2C_PINMUX_CLR (0xFFF0) #define CFG_SYS_I2C_PINMUX_SET (0x000F) -#ifdef CONFIG_MCFFEC -# define CONFIG_OVERWRITE_ETHADDR_ONCE -#endif /* FEC_ENET */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=10000\0" \ diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index b267b74b159..26e4ade34ee 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -42,10 +42,6 @@ * Network * *----------------------------------------------------------------------*/ -#ifdef CONFIG_MCFFEC -#define CONFIG_OVERWRITE_ETHADDR_ONCE -#endif - /*------------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) From 2b210540b13ab528fbccc0122605ef07a57881af Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:40 -0500 Subject: [PATCH 30/41] Convert CONFIG_PEN_ADDR_BIG_ENDIAN to Kconfig This converts the following to Kconfig: CONFIG_PEN_ADDR_BIG_ENDIAN Signed-off-by: Tom Rini --- arch/arm/Kconfig | 3 +++ arch/arm/cpu/armv7/ls102xa/Kconfig | 3 +++ include/configs/ls1021aiot.h | 1 - include/configs/ls1021aqds.h | 1 - include/configs/ls1021atwr.h | 1 - 5 files changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8381e09e102..6e191e41d5b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1599,6 +1599,7 @@ config TARGET_LS1021AQDS select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select LS1_DEEP_SLEEP + select PEN_ADDR_BIG_ENDIAN select SUPPORT_SPL select SYS_FSL_DDR select FSL_DDR_INTERACTIVE @@ -1617,6 +1618,7 @@ config TARGET_LS1021ATWR select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select LS1_DEEP_SLEEP + select PEN_ADDR_BIG_ENDIAN select SUPPORT_SPL select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI select GPIO_EXTRA_HEADER @@ -1681,6 +1683,7 @@ config TARGET_LS1021AIOT select CPU_V7A select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT + select PEN_ADDR_BIG_ENDIAN select SUPPORT_SPL select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI select GPIO_EXTRA_HEADER diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index 7e138e0cc5b..a83eb7e8fdd 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -51,6 +51,9 @@ config MAX_CPUS cores, count the reserved ports. This will allocate enough memory in spin table to properly handle all cores. +config PEN_ADDR_BIG_ENDIAN + bool + config SYS_CCI400_OFFSET hex "Offset for CCI400 base" depends on SYS_FSL_HAS_CCI400 diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 179c5128e3b..0e3ff3c5b7a 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -68,7 +68,6 @@ #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" -#define CONFIG_PEN_ADDR_BIG_ENDIAN #define CONFIG_SMP_PEN_ADDR 0x01ee0200 #define HWCONFIG_BUFFER_SIZE 256 diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index fead9edeccd..76e75335c58 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -242,7 +242,6 @@ * MMC */ -#define CONFIG_PEN_ADDR_BIG_ENDIAN #define CONFIG_SMP_PEN_ADDR 0x01ee0200 #define HWCONFIG_BUFFER_SIZE 256 diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index b07978a999e..281b26fa2ba 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -152,7 +152,6 @@ /* GPIO */ -#define CONFIG_PEN_ADDR_BIG_ENDIAN #define CONFIG_SMP_PEN_ADDR 0x01ee0200 #define HWCONFIG_BUFFER_SIZE 256 From f55281665af3980e5151552fd126fb7293253e96 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:41 -0500 Subject: [PATCH 31/41] arm: ti814x: Remove remaining support code When the ti814x_evm config was removed most, but not all, of the relevant support code was remove. Get rid of what was missed. Fixes: 50b532686849 ("ti814x: Remove platform") Signed-off-by: Tom Rini --- arch/arm/include/asm/arch-am33xx/clock.h | 2 +- .../include/asm/arch-am33xx/clock_ti81xx.h | 36 +- arch/arm/include/asm/arch-am33xx/hardware.h | 2 - .../include/asm/arch-am33xx/hardware_ti814x.h | 60 --- .../include/asm/arch-am33xx/mmc_host_def.h | 5 +- arch/arm/include/asm/arch-am33xx/mux.h | 2 - arch/arm/include/asm/arch-am33xx/mux_ti814x.h | 311 ------------- arch/arm/include/asm/arch-am33xx/omap.h | 2 +- arch/arm/include/asm/arch-am33xx/spl.h | 16 +- arch/arm/mach-omap2/Kconfig | 8 - arch/arm/mach-omap2/am33xx/Kconfig | 10 - arch/arm/mach-omap2/am33xx/Makefile | 1 - arch/arm/mach-omap2/am33xx/clock_ti814x.c | 410 ------------------ arch/arm/mach-omap2/am33xx/emif4.c | 20 - arch/arm/mach-omap2/boot-common.c | 2 +- drivers/i2c/Kconfig | 2 +- drivers/net/ti/cpsw.c | 4 - include/configs/ti814x_evm.h | 102 ----- 18 files changed, 12 insertions(+), 983 deletions(-) delete mode 100644 arch/arm/include/asm/arch-am33xx/hardware_ti814x.h delete mode 100644 arch/arm/include/asm/arch-am33xx/mux_ti814x.h delete mode 100644 arch/arm/mach-omap2/am33xx/clock_ti814x.c delete mode 100644 include/configs/ti814x_evm.h diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h index 79e3b8c7d9f..ad25b3e8aa0 100644 --- a/arch/arm/include/asm/arch-am33xx/clock.h +++ b/arch/arm/include/asm/arch-am33xx/clock.h @@ -13,7 +13,7 @@ #include #include -#if defined(CONFIG_TI816X) || defined(CONFIG_TI814X) +#if defined(CONFIG_TI816X) #include #endif diff --git a/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h b/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h index f0699229a33..d22d9587063 100644 --- a/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h +++ b/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h @@ -44,9 +44,7 @@ struct cm_alwon { unsigned int mmu_clkstctrl; unsigned int mmucfg_clkstctrl; unsigned int ocmc0clkstctrl; -#if defined(CONFIG_TI814X) - unsigned int vcpclkstctrl; -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) unsigned int ocmc1clkstctrl; #endif unsigned int mpuclkstctrl; @@ -67,16 +65,7 @@ struct cm_alwon { unsigned int gpio1clkctrl; unsigned int i2c0clkctrl; unsigned int i2c1clkctrl; -#if defined(CONFIG_TI814X) - unsigned int mcasp345clkctrl; - unsigned int atlclkctrl; - unsigned int mlbclkctrl; - unsigned int pataclkctrl; - unsigned int resv1[1]; - unsigned int uart3clkctrl; - unsigned int uart4clkctrl; - unsigned int uart5clkctrl; -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) unsigned int resv1[1]; unsigned int timer1clkctrl; unsigned int timer2clkctrl; @@ -93,16 +82,12 @@ struct cm_alwon { unsigned int mmudataclkctrl; unsigned int resv2[2]; unsigned int mmucfgclkctrl; -#if defined(CONFIG_TI814X) - unsigned int resv3[2]; -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) unsigned int resv3[1]; unsigned int sdioclkctrl; #endif unsigned int ocmc0clkctrl; -#if defined(CONFIG_TI814X) - unsigned int vcpclkctrl; -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) unsigned int ocmc1clkctrl; #endif unsigned int resv4[2]; @@ -112,9 +97,7 @@ struct cm_alwon { unsigned int ethernet0clkctrl; unsigned int ethernet1clkctrl; unsigned int mpuclkctrl; -#if defined(CONFIG_TI814X) - unsigned int debugssclkctrl; -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) unsigned int resv6[1]; #endif unsigned int l3clkctrl; @@ -126,14 +109,7 @@ struct cm_alwon { unsigned int tptc1clkctrl; unsigned int tptc2clkctrl; unsigned int tptc3clkctrl; -#if defined(CONFIG_TI814X) - unsigned int resv6[4]; - unsigned int dcan01clkctrl; - unsigned int mmchs0clkctrl; - unsigned int mmchs1clkctrl; - unsigned int mmchs2clkctrl; - unsigned int custefuseclkctrl; -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) unsigned int sr0clkctrl; unsigned int sr1clkctrl; #endif diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 0508b8c912a..2d7f9da3652 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -16,8 +16,6 @@ #include #elif defined(CONFIG_TI816X) #include -#elif defined(CONFIG_TI814X) -#include #elif defined(CONFIG_AM43XX) #include #endif diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h deleted file mode 100644 index b00d592bc31..00000000000 --- a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h +++ /dev/null @@ -1,60 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * hardware_ti814x.h - * - * TI814x hardware specific header - * - * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ - */ - -#ifndef __AM33XX_HARDWARE_TI814X_H -#define __AM33XX_HARDWARE_TI814X_H - -/* Module base addresses */ - -/* UART Base Address */ -#define UART0_BASE 0x48020000 - -/* Watchdog Timer */ -#define WDT_BASE 0x481C7000 - -/* Control Module Base Address */ -#define CTRL_BASE 0x48140000 -#define CTRL_DEVICE_BASE 0x48140600 - -/* PRCM Base Address */ -#define PRCM_BASE 0x48180000 -#define CM_PER 0x44E00000 -#define CM_WKUP 0x44E00400 - -#define PRM_RSTCTRL (PRCM_BASE + 0x00A0) -#define PRM_RSTST (PRM_RSTCTRL + 8) - -/* PLL Subsystem Base Address */ -#define PLL_SUBSYS_BASE 0x481C5000 - -/* VTP Base address */ -#define VTP0_CTRL_ADDR 0x48140E0C -#define VTP1_CTRL_ADDR 0x48140E10 - -/* DDR Base address */ -#define DDR_PHY_CMD_ADDR 0x47C0C400 -#define DDR_PHY_DATA_ADDR 0x47C0C4C8 -#define DDR_PHY_CMD_ADDR2 0x47C0C800 -#define DDR_PHY_DATA_ADDR2 0x47C0C8C8 -#define DDR_DATA_REGS_NR 4 - -#define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400) -#define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE - -/* CPSW Config space */ -#define CPSW_MDIO_BASE 0x4A100800 - -/* RTC base address */ -#define RTC_BASE 0x480C0000 - -/* OTG */ -#define USB0_OTG_BASE 0x47401000 -#define USB1_OTG_BASE 0x47401800 - -#endif /* __AM33XX_HARDWARE_TI814X_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h index 5a2ea8faefd..ed15d15c5b3 100644 --- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h +++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h @@ -24,10 +24,7 @@ #define OMAP_HSMMC1_BASE 0x48060000 #define OMAP_HSMMC2_BASE 0x481D8000 -#if defined(CONFIG_TI814X) -#undef MMC_CLOCK_REFERENCE -#define MMC_CLOCK_REFERENCE 192 /* MHz */ -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) #undef MMC_CLOCK_REFERENCE #define MMC_CLOCK_REFERENCE 48 /* MHz */ #endif diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h index b16b1847336..7cf973710d1 100644 --- a/arch/arm/include/asm/arch-am33xx/mux.h +++ b/arch/arm/include/asm/arch-am33xx/mux.h @@ -20,8 +20,6 @@ #ifdef CONFIG_AM33XX #include -#elif defined(CONFIG_TI814X) -#include #elif defined(CONFIG_TI816X) #include #elif defined(CONFIG_AM43XX) diff --git a/arch/arm/include/asm/arch-am33xx/mux_ti814x.h b/arch/arm/include/asm/arch-am33xx/mux_ti814x.h deleted file mode 100644 index a26e5038f71..00000000000 --- a/arch/arm/include/asm/arch-am33xx/mux_ti814x.h +++ /dev/null @@ -1,311 +0,0 @@ -/* - * mux_ti814x.h - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _MUX_TI814X_H_ -#define _MUX_TI814X_H_ - -/* PAD Control Fields */ -#define PINCNTL_RSV_MSK (0x3 << 18) /* Reserved bitmask */ -#define PULLUP_EN (0x1 << 17) /* Pull UP Selection */ -#define PULLUDEN (0x0 << 16) /* Pull up enabled */ -#define PULLUDDIS (0x1 << 16) /* Pull up disabled */ -#define MODE(val) val /* used for Readability */ - -#define MUX_CFG(value, offset) \ -{ \ - int tmp; \ - tmp = __raw_readl(CTRL_BASE + offset); \ - tmp &= PINCNTL_RSV_MSK; \ - __raw_writel(tmp | value, (CTRL_BASE + offset));\ -} - -/* - * PAD CONTROL OFFSETS - * Field names corresponds to the pad signal name - */ -struct pad_signals { - int pincntl1; - int pincntl2; - int pincntl3; - int pincntl4; - int pincntl5; - int pincntl6; - int pincntl7; - int pincntl8; - int pincntl9; - int pincntl10; - int pincntl11; - int pincntl12; - int pincntl13; - int pincntl14; - int pincntl15; - int pincntl16; - int pincntl17; - int pincntl18; - int pincntl19; - int pincntl20; - int pincntl21; - int pincntl22; - int pincntl23; - int pincntl24; - int pincntl25; - int pincntl26; - int pincntl27; - int pincntl28; - int pincntl29; - int pincntl30; - int pincntl31; - int pincntl32; - int pincntl33; - int pincntl34; - int pincntl35; - int pincntl36; - int pincntl37; - int pincntl38; - int pincntl39; - int pincntl40; - int pincntl41; - int pincntl42; - int pincntl43; - int pincntl44; - int pincntl45; - int pincntl46; - int pincntl47; - int pincntl48; - int pincntl49; - int pincntl50; - int pincntl51; - int pincntl52; - int pincntl53; - int pincntl54; - int pincntl55; - int pincntl56; - int pincntl57; - int pincntl58; - int pincntl59; - int pincntl60; - int pincntl61; - int pincntl62; - int pincntl63; - int pincntl64; - int pincntl65; - int pincntl66; - int pincntl67; - int pincntl68; - int pincntl69; - int pincntl70; - int pincntl71; - int pincntl72; - int pincntl73; - int pincntl74; - int pincntl75; - int pincntl76; - int pincntl77; - int pincntl78; - int pincntl79; - int pincntl80; - int pincntl81; - int pincntl82; - int pincntl83; - int pincntl84; - int pincntl85; - int pincntl86; - int pincntl87; - int pincntl88; - int pincntl89; - int pincntl90; - int pincntl91; - int pincntl92; - int pincntl93; - int pincntl94; - int pincntl95; - int pincntl96; - int pincntl97; - int pincntl98; - int pincntl99; - int pincntl100; - int pincntl101; - int pincntl102; - int pincntl103; - int pincntl104; - int pincntl105; - int pincntl106; - int pincntl107; - int pincntl108; - int pincntl109; - int pincntl110; - int pincntl111; - int pincntl112; - int pincntl113; - int pincntl114; - int pincntl115; - int pincntl116; - int pincntl117; - int pincntl118; - int pincntl119; - int pincntl120; - int pincntl121; - int pincntl122; - int pincntl123; - int pincntl124; - int pincntl125; - int pincntl126; - int pincntl127; - int pincntl128; - int pincntl129; - int pincntl130; - int pincntl131; - int pincntl132; - int pincntl133; - int pincntl134; - int pincntl135; - int pincntl136; - int pincntl137; - int pincntl138; - int pincntl139; - int pincntl140; - int pincntl141; - int pincntl142; - int pincntl143; - int pincntl144; - int pincntl145; - int pincntl146; - int pincntl147; - int pincntl148; - int pincntl149; - int pincntl150; - int pincntl151; - int pincntl152; - int pincntl153; - int pincntl154; - int pincntl155; - int pincntl156; - int pincntl157; - int pincntl158; - int pincntl159; - int pincntl160; - int pincntl161; - int pincntl162; - int pincntl163; - int pincntl164; - int pincntl165; - int pincntl166; - int pincntl167; - int pincntl168; - int pincntl169; - int pincntl170; - int pincntl171; - int pincntl172; - int pincntl173; - int pincntl174; - int pincntl175; - int pincntl176; - int pincntl177; - int pincntl178; - int pincntl179; - int pincntl180; - int pincntl181; - int pincntl182; - int pincntl183; - int pincntl184; - int pincntl185; - int pincntl186; - int pincntl187; - int pincntl188; - int pincntl189; - int pincntl190; - int pincntl191; - int pincntl192; - int pincntl193; - int pincntl194; - int pincntl195; - int pincntl196; - int pincntl197; - int pincntl198; - int pincntl199; - int pincntl200; - int pincntl201; - int pincntl202; - int pincntl203; - int pincntl204; - int pincntl205; - int pincntl206; - int pincntl207; - int pincntl208; - int pincntl209; - int pincntl210; - int pincntl211; - int pincntl212; - int pincntl213; - int pincntl214; - int pincntl215; - int pincntl216; - int pincntl217; - int pincntl218; - int pincntl219; - int pincntl220; - int pincntl221; - int pincntl222; - int pincntl223; - int pincntl224; - int pincntl225; - int pincntl226; - int pincntl227; - int pincntl228; - int pincntl229; - int pincntl230; - int pincntl231; - int pincntl232; - int pincntl233; - int pincntl234; - int pincntl235; - int pincntl236; - int pincntl237; - int pincntl238; - int pincntl239; - int pincntl240; - int pincntl241; - int pincntl242; - int pincntl243; - int pincntl244; - int pincntl245; - int pincntl246; - int pincntl247; - int pincntl248; - int pincntl249; - int pincntl250; - int pincntl251; - int pincntl252; - int pincntl253; - int pincntl254; - int pincntl255; - int pincntl256; - int pincntl257; - int pincntl258; - int pincntl259; - int pincntl260; - int pincntl261; - int pincntl262; - int pincntl263; - int pincntl264; - int pincntl265; - int pincntl266; - int pincntl267; - int pincntl268; - int pincntl269; - int pincntl270; -}; - -#endif /* endif _MUX_TI814X_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index bc9f0a1146a..4c71dbf3ab6 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -20,7 +20,7 @@ #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40310000 #define NON_SECURE_SRAM_IMG_END 0x4030B800 -#elif defined(CONFIG_TI816X) || defined(CONFIG_TI814X) +#elif defined(CONFIG_TI816X) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 #define NON_SECURE_SRAM_IMG_END 0x4031B800 diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index f3910c2123a..6bd3ca0d076 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -9,21 +9,7 @@ #define BOOT_DEVICE_NONE 0x00 #define BOOT_DEVICE_MMC2_2 0xFF -#if defined(CONFIG_TI814X) -#define BOOT_DEVICE_XIP 0x01 -#define BOOT_DEVICE_XIPWAIT 0x02 -#define BOOT_DEVICE_NAND 0x05 -#define BOOT_DEVICE_NAND_I2C 0x06 -#define BOOT_DEVICE_MMC2 0x08 /* ROM only supports 2nd instance. */ -#define BOOT_DEVICE_MMC1 0x09 -#define BOOT_DEVICE_SPI 0x15 -#define BOOT_DEVICE_UART 0x41 -#define BOOT_DEVICE_USBETH 0x44 -#define BOOT_DEVICE_CPGMAC 0x46 - -#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 -#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 -#elif defined(CONFIG_TI816X) +#if defined(CONFIG_TI816X) #define BOOT_DEVICE_XIP 0x01 #define BOOT_DEVICE_XIPWAIT 0x02 #define BOOT_DEVICE_NAND 0x03 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 3bf97205226..1db71df2721 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -75,14 +75,6 @@ config OMAP54XX imply SPL_SERIAL imply SYS_I2C_OMAP24XX -config TI814X - bool "TI814X SoC" - select SPECIFY_CONSOLE_INDEX - help - Support for AM335x SOC from Texas Instruments. - The AM335x high performance SOC features a Cortex-A8 - ARM core and more. - config TI816X bool "TI816X SoC" select SPECIFY_CONSOLE_INDEX diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index b666e811104..1299aec055e 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -8,16 +8,6 @@ config TARGET_TI816X_EVM endif -if TI814X - -config TARGET_TI814X_EVM - bool "Support ti814x_evm" - help - This option specifies support for the TI8148 - EVM development platform. - -endif - if AM33XX config AM33XX_CHILISOM diff --git a/arch/arm/mach-omap2/am33xx/Makefile b/arch/arm/mach-omap2/am33xx/Makefile index 4e4f98ea903..bf94d345dae 100644 --- a/arch/arm/mach-omap2/am33xx/Makefile +++ b/arch/arm/mach-omap2/am33xx/Makefile @@ -3,7 +3,6 @@ # Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ obj-$(CONFIG_AM33XX) += clock_am33xx.o -obj-$(CONFIG_TI814X) += clock_ti814x.o obj-$(CONFIG_AM43XX) += clock_am43xx.o ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX),) diff --git a/arch/arm/mach-omap2/am33xx/clock_ti814x.c b/arch/arm/mach-omap2/am33xx/clock_ti814x.c deleted file mode 100644 index 27abaff48fc..00000000000 --- a/arch/arm/mach-omap2/am33xx/clock_ti814x.c +++ /dev/null @@ -1,410 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * clock_ti814x.c - * - * Clocks for TI814X based boards - * - * Copyright (C) 2013, Texas Instruments, Incorporated - */ - -#include -#include -#include -#include -#include -#include - -/* PRCM */ -#define PRCM_MOD_EN 0x2 - -/* CLK_SRC */ -#define OSC_SRC0 0 -#define OSC_SRC1 1 - -#define L3_OSC_SRC OSC_SRC0 - -#define OSC_0_FREQ 20 - -#define DCO_HS2_MIN 500 -#define DCO_HS2_MAX 1000 -#define DCO_HS1_MIN 1000 -#define DCO_HS1_MAX 2000 - -#define SELFREQDCO_HS2 0x00000801 -#define SELFREQDCO_HS1 0x00001001 - -#define MPU_N 0x1 -#define MPU_M 0x3C -#define MPU_M2 1 -#define MPU_CLKCTRL 0x1 - -#define L3_N 19 -#define L3_M 880 -#define L3_M2 4 -#define L3_CLKCTRL 0x801 - -#define DDR_N 19 -#define DDR_M 666 -#define DDR_M2 2 -#define DDR_CLKCTRL 0x801 - -/* ADPLLJ register values */ -#define ADPLLJ_CLKCTRL_HS2 0x00000801 /* HS2 mode, TINT2 = 1 */ -#define ADPLLJ_CLKCTRL_HS1 0x00001001 /* HS1 mode, TINT2 = 1 */ -#define ADPLLJ_CLKCTRL_CLKDCOLDOEN (1 << 29) -#define ADPLLJ_CLKCTRL_IDLE (1 << 23) -#define ADPLLJ_CLKCTRL_CLKOUTEN (1 << 20) -#define ADPLLJ_CLKCTRL_CLKOUTLDOEN (1 << 19) -#define ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ (1 << 17) -#define ADPLLJ_CLKCTRL_LPMODE (1 << 12) -#define ADPLLJ_CLKCTRL_DRIFTGUARDIAN (1 << 11) -#define ADPLLJ_CLKCTRL_REGM4XEN (1 << 10) -#define ADPLLJ_CLKCTRL_TINITZ (1 << 0) -#define ADPLLJ_CLKCTRL_CLKDCO (ADPLLJ_CLKCTRL_CLKDCOLDOEN | \ - ADPLLJ_CLKCTRL_CLKOUTEN | \ - ADPLLJ_CLKCTRL_CLKOUTLDOEN | \ - ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ) - -#define ADPLLJ_STATUS_PHASELOCK (1 << 10) -#define ADPLLJ_STATUS_FREQLOCK (1 << 9) -#define ADPLLJ_STATUS_PHSFRQLOCK (ADPLLJ_STATUS_PHASELOCK | \ - ADPLLJ_STATUS_FREQLOCK) -#define ADPLLJ_STATUS_BYPASSACK (1 << 8) -#define ADPLLJ_STATUS_BYPASS (1 << 0) -#define ADPLLJ_STATUS_BYPASSANDACK (ADPLLJ_STATUS_BYPASSACK | \ - ADPLLJ_STATUS_BYPASS) - -#define ADPLLJ_TENABLE_ENB (1 << 0) -#define ADPLLJ_TENABLEDIV_ENB (1 << 0) - -#define ADPLLJ_M2NDIV_M2SHIFT 16 - -#define MPU_PLL_BASE (PLL_SUBSYS_BASE + 0x048) -#define L3_PLL_BASE (PLL_SUBSYS_BASE + 0x110) -#define DDR_PLL_BASE (PLL_SUBSYS_BASE + 0x290) - -struct ad_pll { - unsigned int pwrctrl; - unsigned int clkctrl; - unsigned int tenable; - unsigned int tenablediv; - unsigned int m2ndiv; - unsigned int mn2div; - unsigned int fracdiv; - unsigned int bwctrl; - unsigned int fracctrl; - unsigned int status; - unsigned int m3div; - unsigned int rampctrl; -}; - -#define OSC_SRC_CTRL (PLL_SUBSYS_BASE + 0x2C0) - -#define ENET_CLKCTRL_CMPL 0x30000 - -#define SATA_PLL_BASE (CTRL_BASE + 0x0720) - -struct sata_pll { - unsigned int pllcfg0; - unsigned int pllcfg1; - unsigned int pllcfg2; - unsigned int pllcfg3; - unsigned int pllcfg4; - unsigned int pllstatus; - unsigned int rxstatus; - unsigned int txstatus; - unsigned int testcfg; -}; - -#define SEL_IN_FREQ (0x1 << 31) -#define DIGCLRZ (0x1 << 30) -#define ENDIGLDO (0x1 << 4) -#define APLL_CP_CURR (0x1 << 3) -#define ENBGSC_REF (0x1 << 2) -#define ENPLLLDO (0x1 << 1) -#define ENPLL (0x1 << 0) - -#define SATA_PLLCFG0_1 (SEL_IN_FREQ | ENBGSC_REF) -#define SATA_PLLCFG0_2 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF) -#define SATA_PLLCFG0_3 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF | ENPLLLDO) -#define SATA_PLLCFG0_4 (SEL_IN_FREQ | DIGCLRZ | ENDIGLDO | ENBGSC_REF | \ - ENPLLLDO | ENPLL) - -#define PLL_LOCK (0x1 << 0) - -#define ENSATAMODE (0x1 << 31) -#define PLLREFSEL (0x1 << 30) -#define MDIVINT (0x4b << 18) -#define EN_CLKAUX (0x1 << 5) -#define EN_CLK125M (0x1 << 4) -#define EN_CLK100M (0x1 << 3) -#define EN_CLK50M (0x1 << 2) - -#define SATA_PLLCFG1 (ENSATAMODE | \ - PLLREFSEL | \ - MDIVINT | \ - EN_CLKAUX | \ - EN_CLK125M | \ - EN_CLK100M | \ - EN_CLK50M) - -#define DIGLDO_EN_CAPLESSMODE (0x1 << 22) -#define PLLDO_EN_LDO_STABLE (0x1 << 11) -#define PLLDO_EN_BUF_CUR (0x1 << 7) -#define PLLDO_EN_LP (0x1 << 6) -#define PLLDO_CTRL_TRIM_1_4V (0x10 << 1) - -#define SATA_PLLCFG3 (DIGLDO_EN_CAPLESSMODE | \ - PLLDO_EN_LDO_STABLE | \ - PLLDO_EN_BUF_CUR | \ - PLLDO_EN_LP | \ - PLLDO_CTRL_TRIM_1_4V) - -const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE; -const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE; -const struct sata_pll *spll = (struct sata_pll *)SATA_PLL_BASE; - -/* - * Enable the peripheral clock for required peripherals - */ -static void enable_per_clocks(void) -{ - /* HSMMC1 */ - writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl); - while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN) - ; - - /* Ethernet */ - writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl); - writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl); - while ((readl(&cmalwon->ethernet0clkctrl) & ENET_CLKCTRL_CMPL) != 0) - ; - writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl); - while ((readl(&cmalwon->ethernet1clkctrl) & ENET_CLKCTRL_CMPL) != 0) - ; - - /* RTC clocks */ - writel(PRCM_MOD_EN, &cmalwon->rtcclkstctrl); - writel(PRCM_MOD_EN, &cmalwon->rtcclkctrl); - while (readl(&cmalwon->rtcclkctrl) != PRCM_MOD_EN) - ; -} - -/* - * select the HS1 or HS2 for DCO Freq - * return : CLKCTRL - */ -static u32 pll_dco_freq_sel(u32 clkout_dco) -{ - if (clkout_dco >= DCO_HS2_MIN && clkout_dco < DCO_HS2_MAX) - return SELFREQDCO_HS2; - else if (clkout_dco >= DCO_HS1_MIN && clkout_dco < DCO_HS1_MAX) - return SELFREQDCO_HS1; - else - return -1; -} - -/* - * select the sigma delta config - * return: sigma delta val - */ -static u32 pll_sigma_delta_val(u32 clkout_dco) -{ - u32 sig_val = 0; - - sig_val = (clkout_dco + 225) / 250; - sig_val = sig_val << 24; - - return sig_val; -} - -/* - * configure individual ADPLLJ - */ -static void pll_config(u32 base, u32 n, u32 m, u32 m2, - u32 clkctrl_val, int adpllj) -{ - const struct ad_pll *adpll = (struct ad_pll *)base; - u32 m2nval, mn2val, read_clkctrl = 0, clkout_dco = 0; - u32 sig_val = 0, hs_mod = 0; - - m2nval = (m2 << ADPLLJ_M2NDIV_M2SHIFT) | n; - mn2val = m; - - /* calculate clkout_dco */ - clkout_dco = ((OSC_0_FREQ / (n+1)) * m); - - /* sigma delta & Hs mode selection skip for ADPLLS*/ - if (adpllj) { - sig_val = pll_sigma_delta_val(clkout_dco); - hs_mod = pll_dco_freq_sel(clkout_dco); - } - - /* by-pass pll */ - read_clkctrl = readl(&adpll->clkctrl); - writel((read_clkctrl | ADPLLJ_CLKCTRL_IDLE), &adpll->clkctrl); - while ((readl(&adpll->status) & ADPLLJ_STATUS_BYPASSANDACK) - != ADPLLJ_STATUS_BYPASSANDACK) - ; - - /* clear TINITZ */ - read_clkctrl = readl(&adpll->clkctrl); - writel((read_clkctrl & ~ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl); - - /* - * ref_clk = 20/(n + 1); - * clkout_dco = ref_clk * m; - * clk_out = clkout_dco/m2; - */ - read_clkctrl = readl(&adpll->clkctrl) & - ~(ADPLLJ_CLKCTRL_LPMODE | - ADPLLJ_CLKCTRL_DRIFTGUARDIAN | - ADPLLJ_CLKCTRL_REGM4XEN); - writel(m2nval, &adpll->m2ndiv); - writel(mn2val, &adpll->mn2div); - - /* Skip for modena(ADPLLS) */ - if (adpllj) { - writel(sig_val, &adpll->fracdiv); - writel((read_clkctrl | hs_mod), &adpll->clkctrl); - } - - /* Load M2, N2 dividers of ADPLL */ - writel(ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv); - writel(~ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv); - - /* Load M, N dividers of ADPLL */ - writel(ADPLLJ_TENABLE_ENB, &adpll->tenable); - writel(~ADPLLJ_TENABLE_ENB, &adpll->tenable); - - /* Configure CLKDCOLDOEN,CLKOUTLDOEN,CLKOUT Enable BITS */ - read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_CLKDCO; - if (adpllj) - writel((read_clkctrl | ADPLLJ_CLKCTRL_CLKDCO), - &adpll->clkctrl); - - /* Enable TINTZ and disable IDLE(PLL in Active & Locked Mode */ - read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_IDLE; - writel((read_clkctrl | ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl); - - /* Wait for phase and freq lock */ - while ((readl(&adpll->status) & ADPLLJ_STATUS_PHSFRQLOCK) != - ADPLLJ_STATUS_PHSFRQLOCK) - ; -} - -static void unlock_pll_control_mmr(void) -{ - /* TRM 2.10.1.4 and 3.2.7-3.2.11 */ - writel(0x1EDA4C3D, 0x481C5040); - writel(0x2FF1AC2B, 0x48140060); - writel(0xF757FDC0, 0x48140064); - writel(0xE2BC3A6D, 0x48140068); - writel(0x1EBF131D, 0x4814006c); - writel(0x6F361E05, 0x48140070); -} - -static void mpu_pll_config(void) -{ - pll_config(MPU_PLL_BASE, MPU_N, MPU_M, MPU_M2, MPU_CLKCTRL, 0); -} - -static void l3_pll_config(void) -{ - u32 l3_osc_src, rd_osc_src = 0; - - l3_osc_src = L3_OSC_SRC; - rd_osc_src = readl(OSC_SRC_CTRL); - - if (OSC_SRC0 == l3_osc_src) - writel((rd_osc_src & 0xfffffffe)|0x0, OSC_SRC_CTRL); - else - writel((rd_osc_src & 0xfffffffe)|0x1, OSC_SRC_CTRL); - - pll_config(L3_PLL_BASE, L3_N, L3_M, L3_M2, L3_CLKCTRL, 1); -} - -void ddr_pll_config(unsigned int ddrpll_m) -{ - pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1); -} - -void sata_pll_config(void) -{ - /* - * This sequence for configuring the SATA PLL - * resident in the control module is documented - * in TI8148 TRM section 21.3.1 - */ - writel(SATA_PLLCFG1, &spll->pllcfg1); - udelay(50); - - writel(SATA_PLLCFG3, &spll->pllcfg3); - udelay(50); - - writel(SATA_PLLCFG0_1, &spll->pllcfg0); - udelay(50); - - writel(SATA_PLLCFG0_2, &spll->pllcfg0); - udelay(50); - - writel(SATA_PLLCFG0_3, &spll->pllcfg0); - udelay(50); - - writel(SATA_PLLCFG0_4, &spll->pllcfg0); - udelay(50); - - while (((readl(&spll->pllstatus) & PLL_LOCK) == 0)) - ; -} - -void enable_dmm_clocks(void) -{ - writel(PRCM_MOD_EN, &cmdef->fwclkctrl); - writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl); - writel(PRCM_MOD_EN, &cmdef->emif0clkctrl); - while ((readl(&cmdef->emif0clkctrl)) != PRCM_MOD_EN) - ; - writel(PRCM_MOD_EN, &cmdef->emif1clkctrl); - while ((readl(&cmdef->emif1clkctrl)) != PRCM_MOD_EN) - ; - while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300) - ; - writel(PRCM_MOD_EN, &cmdef->dmmclkctrl); - while ((readl(&cmdef->dmmclkctrl)) != PRCM_MOD_EN) - ; - writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl); - while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100) - ; -} - -void setup_clocks_for_console(void) -{ - unlock_pll_control_mmr(); - /* UART0 */ - writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl); - while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) - ; -} - -void setup_early_clocks(void) -{ - setup_clocks_for_console(); -} - -/* - * Configure the PLL/PRCM for necessary peripherals - */ -void prcm_init(void) -{ - /* Enable the control module */ - writel(PRCM_MOD_EN, &cmalwon->controlclkctrl); - - /* Configure PLLs */ - mpu_pll_config(); - l3_pll_config(); - sata_pll_config(); - - /* Enable the required peripherals */ - enable_per_clocks(); -} diff --git a/arch/arm/mach-omap2/am33xx/emif4.c b/arch/arm/mach-omap2/am33xx/emif4.c index a5fdb0433dc..bf3da43ed98 100644 --- a/arch/arm/mach-omap2/am33xx/emif4.c +++ b/arch/arm/mach-omap2/am33xx/emif4.c @@ -28,26 +28,6 @@ static struct cm_device_inst *cm_device = (struct cm_device_inst *)CM_DEVICE_INST; #endif -#ifdef CONFIG_TI814X -void config_dmm(const struct dmm_lisa_map_regs *regs) -{ - struct dmm_lisa_map_regs *hw_lisa_map_regs = - (struct dmm_lisa_map_regs *)DMM_BASE; - - enable_dmm_clocks(); - - writel(0, &hw_lisa_map_regs->dmm_lisa_map_3); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_2); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_1); - writel(0, &hw_lisa_map_regs->dmm_lisa_map_0); - - writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3); - writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2); - writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1); - writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); -} -#endif - static void config_vtp(int nr) { writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE, diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c index f955d494718..d104f23b3e2 100644 --- a/arch/arm/mach-omap2/boot-common.c +++ b/arch/arm/mach-omap2/boot-common.c @@ -183,7 +183,7 @@ void save_omap_boot_params(void) gd->arch.omap_boot_mode = boot_mode; -#if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \ +#if !defined(CONFIG_TI816X) && \ !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX) /* CH flags */ diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 08b6c7bdcc4..76e19918aad 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -704,7 +704,7 @@ config SYS_I2C_BUS_MAX depends on ARCH_OMAP2PLUS || ARCH_SOCFPGA default 2 if TI816X default 3 if OMAP34XX || AM33XX || AM43XX - default 4 if ARCH_SOCFPGA || OMAP44XX || TI814X + default 4 if ARCH_SOCFPGA || OMAP44XX default 5 if OMAP54XX help Define the maximum number of available I2C buses. diff --git a/drivers/net/ti/cpsw.c b/drivers/net/ti/cpsw.c index a19dc38e525..3a8cc9c52a5 100644 --- a/drivers/net/ti/cpsw.c +++ b/drivers/net/ti/cpsw.c @@ -79,10 +79,6 @@ struct cpsw_slave_regs { u32 tx_pri_map; #ifdef CONFIG_AM33XX u32 gap_thresh; -#elif defined(CONFIG_TI814X) - u32 ts_ctl; - u32 ts_seq_ltype; - u32 ts_vlan; #endif u32 sa_lo; u32 sa_hi; diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h deleted file mode 100644 index 03849adb5ab..00000000000 --- a/include/configs/ti814x_evm.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * ti814x_evm.h - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __CONFIG_TI814X_EVM_H -#define __CONFIG_TI814X_EVM_H - -#include - -/* commands to include */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80200000\0" \ - "fdtaddr=0x80F80000\0" \ - "rdaddr=0x81000000\0" \ - "bootfile=/boot/uImage\0" \ - "fdtfile=\0" \ - "console=ttyO0,115200n8\0" \ - "optargs=\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 ro\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ - "ramrootfstype=ext2\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "bootenv=uEnv.txt\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ - "ramargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${ramroot} " \ - "rootfstype=${ramrootfstype}\0" \ - "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ - "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ - "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "ramboot=echo Booting from ramdisk ...; " \ - "run ramargs; " \ - "bootm ${loadaddr}\0" \ - "fdtfile=ti814x-evm.dtb\0" \ - -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - - -/* Console I/O Buffer Size */ - -/** - * Physical Memory Map - */ -#define PHYS_DRAM_1_SIZE 0x20000000 /* 512MB */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1024MB */ - -#define CFG_SYS_SDRAM_BASE 0x80000000 - -/** - * Platform/Board specific defs - */ -#define CFG_SYS_TIMERBASE 0x4802E000 - -/* NS16550 Configuration */ -#define CFG_SYS_NS16550_CLK (48000000) -#define CFG_SYS_NS16550_COM1 0x48020000 /* Base EVM has UART0 */ - -/* CPU */ - -/* Defines for SPL */ - -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80800000 should not be used for any - * other needs. - */ - -/* - * Since SPL did pll and ddr initialization for us, - * we don't need to do it twice. - */ - -/* Ethernet */ -#define CONFIG_PHY_ET1011C_TX_CLK_FIX - -#endif /* ! __CONFIG_TI814X_EVM_H */ From abbb4043c4d38228cb980ddddc0edb8e0fe81eae Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:42 -0500 Subject: [PATCH 32/41] powerpc: Migrate CONFIG_PPC_SPINTABLE_COMPATIBLE to Kconfig Move this symbol to Kconfig, and preserve the current behavior. The help text here comes from where the relevant code is implemented and it is quite likely at this point in time we could either disable this option or at least make it configurable. Signed-off-by: Tom Rini --- arch/powerpc/cpu/mpc85xx/Kconfig | 13 +++++++++++++ arch/powerpc/include/asm/config_mpc85xx.h | 6 ------ 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 36519613a2c..03373bf8692 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -1,6 +1,19 @@ menu "mpc85xx CPU" depends on MPC85xx +config PPC_SPINTABLE_COMPATIBLE + depends on MP + def_bool y + help + To comply with ePAPR 1.1, the spin table has been moved to + cache-enabled memory. Old OS may not work with this change. A patch + is waiting to be accepted for Linux kernel. Other OS needs similar + fix to spin table. For OSes with old spin table code, we can enable + this temporary fix by setting environmental variable + "spin_table_compat". For new OSes, set "spin_table_compat=no". After + Linux is fixed, we can remove this macro and related code. For now, + it is enabled by default. + config SYS_CPU default "mpc85xx" diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index e8059910606..246bcb9fe49 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -8,12 +8,6 @@ /* SoC specific defines for Freescale MPC85xx (PQ3) and QorIQ processors */ -/* - * This macro should be removed when we no longer care about backwards - * compatibility with older operating systems. - */ -#define CONFIG_PPC_SPINTABLE_COMPATIBLE - #include #if defined(CONFIG_ARCH_MPC8548) From c46597155ec38114c9908a6c6fed6819223e6adc Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:43 -0500 Subject: [PATCH 33/41] sandbox: Finish migration to Kconfig Stop using CONFIG_SANDBOX_ARCH and use CONFIG_SANDBOX instead. For the SPI related defines, set them directly in Kconfig. This now empties arch/sandbox/include/asm/config.h. Cc: Simon Glass Signed-off-by: Tom Rini Reviewed-by: Simon Glass --- arch/sandbox/include/asm/config.h | 10 ---------- drivers/adc/adc-uclass.c | 2 +- drivers/spi/Kconfig | 10 ++++++++++ 3 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/sandbox/include/asm/config.h b/arch/sandbox/include/asm/config.h index 50215b35d77..87b9d23b37d 100644 --- a/arch/sandbox/include/asm/config.h +++ b/arch/sandbox/include/asm/config.h @@ -6,14 +6,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#define CONFIG_SANDBOX_ARCH - -/* Used by drivers/spi/sandbox_spi.c and arch/sandbox/include/asm/state.h */ -#ifndef CONFIG_SANDBOX_SPI_MAX_BUS -#define CONFIG_SANDBOX_SPI_MAX_BUS 1 -#endif -#ifndef CONFIG_SANDBOX_SPI_MAX_CS -#define CONFIG_SANDBOX_SPI_MAX_CS 10 -#endif - #endif diff --git a/drivers/adc/adc-uclass.c b/drivers/adc/adc-uclass.c index 67137ffb341..9646e4d7062 100644 --- a/drivers/adc/adc-uclass.c +++ b/drivers/adc/adc-uclass.c @@ -22,7 +22,7 @@ #define CHECK_MASK (!CHECK_NUMBER) /* TODO: add support for timer uclass (for early calls) */ -#ifdef CONFIG_SANDBOX_ARCH +#ifdef CONFIG_SANDBOX #define sdelay(x) udelay(x) #else extern void sdelay(unsigned long loops); diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index c6900f449d5..64ceed12ce4 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -429,6 +429,16 @@ config SANDBOX_SPI }; }; +config SANDBOX_SPI_MAX_BUS + int + depends on SANDBOX + default 1 + +config SANDBOX_SPI_MAX_CS + int + depends on SANDBOX + default 10 + config SPI_ASPEED_SMC bool "ASPEED SPI flash controller driver" depends on DM_SPI && SPI_MEM From 32b7e39db4d3af0d94f1387a7641152f375b23ac Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:44 -0500 Subject: [PATCH 34/41] Convert CONFIG_STANDALONE_LOAD_ADDR to Kconfig This converts the following to Kconfig: CONFIG_STANDALONE_LOAD_ADDR Signed-off-by: Tom Rini --- README | 7 ------- api/Kconfig | 19 +++++++++++++++++++ arch/arc/config.mk | 3 --- arch/arm/config.mk | 8 -------- .../include/asm/arch-fsl-layerscape/config.h | 2 -- arch/m68k/config.mk | 2 -- arch/microblaze/config.mk | 2 -- arch/mips/config.mk | 2 -- arch/nios2/config.mk | 2 -- arch/powerpc/config.mk | 1 - arch/riscv/config.mk | 2 -- arch/sh/config.mk | 1 - arch/x86/config.mk | 2 -- configs/display5_defconfig | 1 + configs/display5_factory_defconfig | 1 + configs/microchip_mpfs_icicle_defconfig | 1 + configs/qemu-riscv32_defconfig | 1 + configs/qemu-riscv32_smode_defconfig | 1 + configs/qemu-riscv32_spl_defconfig | 1 + configs/qemu-riscv64_defconfig | 1 + configs/qemu-riscv64_smode_defconfig | 1 + configs/qemu-riscv64_spl_defconfig | 1 + configs/sifive_unleashed_defconfig | 1 + configs/sifive_unmatched_defconfig | 1 + configs/xtfpga_defconfig | 1 + include/configs/display5.h | 2 -- include/configs/microchip_mpfs_icicle.h | 2 -- include/configs/opos6uldev.h | 1 - include/configs/qemu-riscv.h | 2 -- include/configs/sifive-unleashed.h | 2 -- include/configs/sifive-unmatched.h | 2 -- include/configs/sunxi-common.h | 3 --- include/configs/xtfpga.h | 16 ---------------- 33 files changed, 31 insertions(+), 64 deletions(-) diff --git a/README b/README index 3ebee1cb375..c8f6b21e2d9 100644 --- a/README +++ b/README @@ -1166,13 +1166,6 @@ The following options need to be configured: this is instead controlled by the value of /config/load-environment. - CONFIG_STANDALONE_LOAD_ADDR - - This option defines a board specific value for the - address where standalone program gets loaded, thus - overwriting the architecture dependent default - settings. - - Automatic software updates via TFTP server CONFIG_UPDATE_TFTP CONFIG_UPDATE_TFTP_CNT_MAX diff --git a/api/Kconfig b/api/Kconfig index eb8d5d0596a..d9362724e5f 100644 --- a/api/Kconfig +++ b/api/Kconfig @@ -11,3 +11,22 @@ config SYS_MMC_MAX_DEVICE default 1 endmenu + +config STANDALONE_LOAD_ADDR + hex "Address in memory to link standalone applications to" + default 0xffffffff80200000 if MIPS && 64BIT + default 0x8c000000 if SH + default 0x82000000 if ARC + default 0x80f00000 if MICROBLAZE + default 0x80300000 if ARCH_OMAP2PLUS || FSL_LSCH2 || FSL_LSCH3 + default 0x80200000 if MIPS && 32BIT + default 0x0c100000 if ARM + default 0x02000000 if NIOS2 + default 0x00040000 if PPC || X86 + default 0x00020000 if M68K + default 0x0 if RISCV + default SYS_LOAD_ADDR + help + This option defines a board specific value for the address where + standalone program gets loaded, thus overwriting the architecture + dependent default settings. diff --git a/arch/arc/config.mk b/arch/arc/config.mk index 2b70945ac34..b713fa3054c 100644 --- a/arch/arc/config.mk +++ b/arch/arc/config.mk @@ -21,6 +21,3 @@ PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections -fno-common # Needed for relocation LDFLAGS_FINAL += -pie --gc-sections - -# Load address for standalone apps -CONFIG_STANDALONE_LOAD_ADDR ?= 0x82000000 diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 2065438d053..bf781f10262 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -3,14 +3,6 @@ # (C) Copyright 2000-2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -ifndef CONFIG_STANDALONE_LOAD_ADDR -ifneq ($(CONFIG_ARCH_OMAP2PLUS),) -CONFIG_STANDALONE_LOAD_ADDR = 0x80300000 -else -CONFIG_STANDALONE_LOAD_ADDR = 0xc100000 -endif -endif - CFLAGS_NON_EFI := -fno-pic -ffixed-r9 -ffunction-sections -fdata-sections \ -fstack-protector-strong CFLAGS_EFI := -fpic -fshort-wchar diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index c9c72e32717..57d92f65520 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -14,8 +14,6 @@ #include #endif -#define CONFIG_STANDALONE_LOAD_ADDR 0x80300000 - /* * Reserve secure memory * To be aligned with MMU block size diff --git a/arch/m68k/config.mk b/arch/m68k/config.mk index ed592334af2..3ccbe492202 100644 --- a/arch/m68k/config.mk +++ b/arch/m68k/config.mk @@ -3,8 +3,6 @@ # (C) Copyright 2000-2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -CONFIG_STANDALONE_LOAD_ADDR ?= 0x20000 - PLATFORM_CPPFLAGS += -D__M68K__ KBUILD_LDFLAGS += -n PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index d35b4f6db7a..467c5ca1b12 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -6,8 +6,6 @@ # (C) Copyright 2004 Atmark Techno, Inc. # Yasushi SHOJI -CONFIG_STANDALONE_LOAD_ADDR ?= 0x80F00000 - PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__ PLATFORM_CPPFLAGS += -fdata-sections -ffunction-sections diff --git a/arch/mips/config.mk b/arch/mips/config.mk index 04f36278058..745f03190e9 100644 --- a/arch/mips/config.mk +++ b/arch/mips/config.mk @@ -25,14 +25,12 @@ ifdef CONFIG_32BIT PLATFORM_CPPFLAGS += -mabi=32 KBUILD_LDFLAGS += -m $(32bit-emul) OBJCOPYFLAGS += -O $(32bit-bfd) -CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 endif ifdef CONFIG_64BIT PLATFORM_CPPFLAGS += -mabi=64 KBUILD_LDFLAGS += -m$(64bit-emul) OBJCOPYFLAGS += -O $(64bit-bfd) -CONFIG_STANDALONE_LOAD_ADDR ?= 0xffffffff80200000 endif PLATFORM_CPPFLAGS += -D__MIPS__ diff --git a/arch/nios2/config.mk b/arch/nios2/config.mk index 44260b1431c..b18b9b78ab6 100644 --- a/arch/nios2/config.mk +++ b/arch/nios2/config.mk @@ -4,8 +4,6 @@ # Psyent Corporation # Scott McNutt -CONFIG_STANDALONE_LOAD_ADDR ?= 0x02000000 - PLATFORM_CPPFLAGS += -D__NIOS2__ PLATFORM_CPPFLAGS += -G0 diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk index 307ca65745c..725a4f48aad 100644 --- a/arch/powerpc/config.mk +++ b/arch/powerpc/config.mk @@ -3,7 +3,6 @@ # (C) Copyright 2000-2010 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000 LDFLAGS_FINAL += --gc-sections LDFLAGS_FINAL += --bss-plt PLATFORM_RELFLAGS += -fpic -mrelocatable -ffunction-sections \ diff --git a/arch/riscv/config.mk b/arch/riscv/config.mk index 1ebce5bd674..a8ed3faf28c 100644 --- a/arch/riscv/config.mk +++ b/arch/riscv/config.mk @@ -23,8 +23,6 @@ KBUILD_LDFLAGS += -m $(64bit-emul) EFI_LDS := elf_riscv64_efi.lds endif -CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 - PLATFORM_CPPFLAGS += -ffixed-gp -fpic PLATFORM_RELFLAGS += -fno-common -gdwarf-2 -ffunction-sections \ -fdata-sections diff --git a/arch/sh/config.mk b/arch/sh/config.mk index 78bb2660e1e..a408264d4b1 100644 --- a/arch/sh/config.mk +++ b/arch/sh/config.mk @@ -3,7 +3,6 @@ # (C) Copyright 2000-2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -CONFIG_STANDALONE_LOAD_ADDR ?= 0x8C000000 ifeq ($(CPU),sh2) LDFLAGS_STANDALONE += -EB endif diff --git a/arch/x86/config.mk b/arch/x86/config.mk index 889497b6bd7..a4a694ddf31 100644 --- a/arch/x86/config.mk +++ b/arch/x86/config.mk @@ -3,8 +3,6 @@ # (C) Copyright 2000-2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000 - PLATFORM_CPPFLAGS += -fomit-frame-pointer PF_CPPFLAGS_X86 := $(call cc-option, -fno-toplevel-reorder, \ $(call cc-option, -fno-unit-at-a-time)) diff --git a/configs/display5_defconfig b/configs/display5_defconfig index dbd917b4ddb..c46a0a0b699 100644 --- a/configs/display5_defconfig +++ b/configs/display5_defconfig @@ -30,6 +30,7 @@ CONFIG_ENV_OFFSET_REDUND=0x130000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_MONITOR_LEN=409600 +CONFIG_STANDALONE_LOAD_ADDR=0x10001000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig index 7508702eb95..cacdf33d53e 100644 --- a/configs/display5_factory_defconfig +++ b/configs/display5_factory_defconfig @@ -27,6 +27,7 @@ CONFIG_ENV_OFFSET_REDUND=0x130000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SYS_MONITOR_LEN=409600 +CONFIG_STANDALONE_LOAD_ADDR=0x10001000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set diff --git a/configs/microchip_mpfs_icicle_defconfig b/configs/microchip_mpfs_icicle_defconfig index fbb2df4a749..c2b938e7e7e 100644 --- a/configs/microchip_mpfs_icicle_defconfig +++ b/configs/microchip_mpfs_icicle_defconfig @@ -12,6 +12,7 @@ CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 +CONFIG_STANDALONE_LOAD_ADDR=0x80200000 CONFIG_FIT=y CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y diff --git a/configs/qemu-riscv32_defconfig b/configs/qemu-riscv32_defconfig index 425bb37c988..844c95380e6 100644 --- a/configs/qemu-riscv32_defconfig +++ b/configs/qemu-riscv32_defconfig @@ -9,6 +9,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_SYS_MONITOR_LEN=786432 +CONFIG_STANDALONE_LOAD_ADDR=0x80200000 CONFIG_FIT=y CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y diff --git a/configs/qemu-riscv32_smode_defconfig b/configs/qemu-riscv32_smode_defconfig index eeb90360cdb..2be349ada76 100644 --- a/configs/qemu-riscv32_smode_defconfig +++ b/configs/qemu-riscv32_smode_defconfig @@ -10,6 +10,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_SYS_MONITOR_LEN=786432 +CONFIG_STANDALONE_LOAD_ADDR=0x80200000 CONFIG_FIT=y CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y diff --git a/configs/qemu-riscv32_spl_defconfig b/configs/qemu-riscv32_spl_defconfig index 04447e5ed3c..894b6d5d174 100644 --- a/configs/qemu-riscv32_spl_defconfig +++ b/configs/qemu-riscv32_spl_defconfig @@ -12,6 +12,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_SYS_MONITOR_LEN=786432 +CONFIG_STANDALONE_LOAD_ADDR=0x80200000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000 CONFIG_DISPLAY_CPUINFO=y diff --git a/configs/qemu-riscv64_defconfig b/configs/qemu-riscv64_defconfig index 7430fa075d7..8b558e6bc27 100644 --- a/configs/qemu-riscv64_defconfig +++ b/configs/qemu-riscv64_defconfig @@ -9,6 +9,7 @@ CONFIG_ARCH_RV64I=y CONFIG_DISTRO_DEFAULTS=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 +CONFIG_STANDALONE_LOAD_ADDR=0x80200000 CONFIG_FIT=y CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y diff --git a/configs/qemu-riscv64_smode_defconfig b/configs/qemu-riscv64_smode_defconfig index 03ef58ba475..6ed88de2342 100644 --- a/configs/qemu-riscv64_smode_defconfig +++ b/configs/qemu-riscv64_smode_defconfig @@ -10,6 +10,7 @@ CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 +CONFIG_STANDALONE_LOAD_ADDR=0x80200000 CONFIG_FIT=y CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr}; fdt addr ${fdtcontroladdr};" diff --git a/configs/qemu-riscv64_spl_defconfig b/configs/qemu-riscv64_spl_defconfig index 840e0ff151c..adc6f730d2a 100644 --- a/configs/qemu-riscv64_spl_defconfig +++ b/configs/qemu-riscv64_spl_defconfig @@ -11,6 +11,7 @@ CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 +CONFIG_STANDALONE_LOAD_ADDR=0x80200000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000 CONFIG_DISPLAY_CPUINFO=y diff --git a/configs/sifive_unleashed_defconfig b/configs/sifive_unleashed_defconfig index 99faabaa2ff..6c85962cbb2 100644 --- a/configs/sifive_unleashed_defconfig +++ b/configs/sifive_unleashed_defconfig @@ -16,6 +16,7 @@ CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 +CONFIG_STANDALONE_LOAD_ADDR=0x80200000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000 CONFIG_USE_PREBOOT=y diff --git a/configs/sifive_unmatched_defconfig b/configs/sifive_unmatched_defconfig index c390af26897..3d96aa54119 100644 --- a/configs/sifive_unmatched_defconfig +++ b/configs/sifive_unmatched_defconfig @@ -19,6 +19,7 @@ CONFIG_RISCV_SMODE=y CONFIG_DISTRO_DEFAULTS=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 +CONFIG_STANDALONE_LOAD_ADDR=0x80200000 CONFIG_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000 CONFIG_USE_PREBOOT=y diff --git a/configs/xtfpga_defconfig b/configs/xtfpga_defconfig index f5eeea426bb..d3a350f5400 100644 --- a/configs/xtfpga_defconfig +++ b/configs/xtfpga_defconfig @@ -9,6 +9,7 @@ CONFIG_SYS_LOAD_ADDR=0x02000000 CONFIG_ENV_ADDR=0xF7FE0000 CONFIG_XTFPGA_KC705=y CONFIG_SYS_MONITOR_LEN=262144 +CONFIG_STANDALONE_LOAD_ADDR=0x00800000 CONFIG_SYS_MONITOR_BASE=0xF6000000 CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_SHOW_BOOT_PROGRESS=y diff --git a/include/configs/display5.h b/include/configs/display5.h index 5cbeb9224c3..4401515a65e 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -276,8 +276,6 @@ /* Miscellaneous configurable options */ -#define CONFIG_STANDALONE_LOAD_ADDR 0x10001000 - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM diff --git a/include/configs/microchip_mpfs_icicle.h b/include/configs/microchip_mpfs_icicle.h index 3def93d61e8..c73c5a1d9fe 100644 --- a/include/configs/microchip_mpfs_icicle.h +++ b/include/configs/microchip_mpfs_icicle.h @@ -11,8 +11,6 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 - /* Environment options */ #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h index 5c44b9dcb20..459134b93f8 100644 --- a/include/configs/opos6uldev.h +++ b/include/configs/opos6uldev.h @@ -11,7 +11,6 @@ #include "mx6_common.h" /* Miscellaneous configurable options */ -#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR /* Physical Memory Map */ #define CFG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR diff --git a/include/configs/qemu-riscv.h b/include/configs/qemu-riscv.h index 72f35cc0542..35172da3ff1 100644 --- a/include/configs/qemu-riscv.h +++ b/include/configs/qemu-riscv.h @@ -10,8 +10,6 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 - #define RISCV_MMODE_TIMERBASE 0x2000000 #define RISCV_MMODE_TIMER_FREQ 1000000 diff --git a/include/configs/sifive-unleashed.h b/include/configs/sifive-unleashed.h index 5ad2124bdda..4a453a9df40 100644 --- a/include/configs/sifive-unleashed.h +++ b/include/configs/sifive-unleashed.h @@ -13,8 +13,6 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 - #define RISCV_MMODE_TIMERBASE 0x2000000 #define RISCV_MMODE_TIMER_FREQ 1000000 diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h index f4b1a16019e..ac42108620f 100644 --- a/include/configs/sifive-unmatched.h +++ b/include/configs/sifive-unmatched.h @@ -13,8 +13,6 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 - /* Environment options */ #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 496139f3463..5d82e7e560f 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -73,9 +73,6 @@ * Miscellaneous configurable options */ -/* standalone support */ -#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR - /* FLASH and environment organization */ /* diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 9201dac7abc..e0189c58f04 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -53,22 +53,6 @@ /* Memory test is destructive so default must not overlap vectors or U-Boot*/ -/* Load address for stand-alone applications. - * MEMADDR cannot be used here, because the definition needs to be - * a plain number as it's used as -Ttext argument for ld in standalone - * example makefile. - * Handle noMMU vs MMUv2 vs MMUv3 distinction here manually. - */ -#if XCHAL_HAVE_PTP_MMU -#if XCHAL_VECBASE_RESET_VADDR == XCHAL_VECBASE_RESET_PADDR -#define CONFIG_STANDALONE_LOAD_ADDR 0x00800000 -#else -#define CONFIG_STANDALONE_LOAD_ADDR 0xd0800000 -#endif -#else -#define CONFIG_STANDALONE_LOAD_ADDR 0x60800000 -#endif - #if defined(CONFIG_MAX_MEM_MAPPED) && \ CONFIG_MAX_MEM_MAPPED < CFG_SYS_SDRAM_SIZE #define XTENSA_SYS_TEXT_ADDR \ From d14f3f272519a5525d93ec98cbdd4d9eec7db6e9 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:45 -0500 Subject: [PATCH 35/41] Convert CONFIG_TEGRA_ENABLE_UARTA et al to Kconfig This converts the following to Kconfig: CONFIG_TEGRA_ENABLE_UARTA CONFIG_TEGRA_ENABLE_UARTB CONFIG_TEGRA_ENABLE_UARTC CONFIG_TEGRA_ENABLE_UARTD CONFIG_TEGRA_SPI CONFIG_TEGRA_UARTA_GPU CONFIG_TEGRA_UARTA_SDIO1 CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 Signed-off-by: Tom Rini --- arch/arm/mach-tegra/Kconfig | 23 +++++++++++++++++++++++ arch/arm/mach-tegra/tegra20/Kconfig | 8 ++++++++ arch/arm/mach-tegra/tegra30/Kconfig | 8 ++++++++ configs/cei-tk1-som_defconfig | 1 + configs/dalmore_defconfig | 1 + configs/harmony_defconfig | 1 + configs/jetson-tk1_defconfig | 1 + configs/medcom-wide_defconfig | 1 + configs/plutux_defconfig | 1 + configs/seaboard_defconfig | 1 + configs/tec-ng_defconfig | 1 + configs/tec_defconfig | 1 + configs/ventana_defconfig | 1 + include/configs/apalis-tk1.h | 1 - include/configs/apalis_t30.h | 1 - include/configs/beaver.h | 4 ---- include/configs/cardhu.h | 4 ---- include/configs/cei-tk1-som.h | 1 - include/configs/colibri_t20.h | 2 -- include/configs/colibri_t30.h | 1 - include/configs/dalmore.h | 1 - include/configs/harmony.h | 1 - include/configs/jetson-tk1.h | 1 - include/configs/medcom-wide.h | 1 - include/configs/nyan-big.h | 1 - include/configs/p2371-0000.h | 1 - include/configs/p2371-2180.h | 1 - include/configs/p2571.h | 1 - include/configs/p3450-0000.h | 1 - include/configs/paz00.h | 1 - include/configs/plutux.h | 1 - include/configs/seaboard.h | 1 - include/configs/tec-ng.h | 1 - include/configs/tec.h | 1 - include/configs/tegra-common-post.h | 4 ---- include/configs/trimslice.h | 2 -- include/configs/venice2.h | 1 - include/configs/ventana.h | 1 - 38 files changed, 49 insertions(+), 36 deletions(-) diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index edcf967afd9..1b575cc0f45 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -177,6 +177,29 @@ source "arch/arm/mach-tegra/tegra124/Kconfig" source "arch/arm/mach-tegra/tegra210/Kconfig" source "arch/arm/mach-tegra/tegra186/Kconfig" +config TEGRA_SPI + def_bool y + depends on TEGRA20_SFLASH || TEGRA20_SLINK || TEGRA114_SPI + +choice + prompt "UART to use for console" + depends on TEGRA_PINCTRL + default TEGRA_ENABLE_UARTA + +config TEGRA_ENABLE_UARTA + bool "Use UARTA" + +config TEGRA_ENABLE_UARTB + bool "Use UARTB" + +config TEGRA_ENABLE_UARTC + bool "Use UARTC" + +config TEGRA_ENABLE_UARTD + bool "Use UARTD" + +endchoice + config TEGRA_GPU bool "Enable setting up the GPU" depends on TEGRA124 || TEGRA210 diff --git a/arch/arm/mach-tegra/tegra20/Kconfig b/arch/arm/mach-tegra/tegra20/Kconfig index 345563fc789..955786c0c48 100644 --- a/arch/arm/mach-tegra/tegra20/Kconfig +++ b/arch/arm/mach-tegra/tegra20/Kconfig @@ -10,6 +10,12 @@ config TEGRA_PMU config TEGRA_CLOCK_SCALING bool +config TEGRA_UARTA_GPU + bool + +config TEGRA_UARTA_SDIO1 + bool + choice prompt "Tegra20 board select" optional @@ -43,6 +49,7 @@ config TARGET_TEC config TARGET_TRIMSLICE bool "Compulab TrimSlice board" select BOARD_LATE_INIT + select TEGRA_UARTA_GPU config TARGET_VENTANA bool "NVIDIA Tegra20 Ventana evaluation board" @@ -51,6 +58,7 @@ config TARGET_VENTANA config TARGET_COLIBRI_T20 bool "Toradex Colibri T20 board" select BOARD_LATE_INIT + select TEGRA_UARTA_SDIO1 endchoice diff --git a/arch/arm/mach-tegra/tegra30/Kconfig b/arch/arm/mach-tegra/tegra30/Kconfig index 85b8ce294f2..5619d1cd42f 100644 --- a/arch/arm/mach-tegra/tegra30/Kconfig +++ b/arch/arm/mach-tegra/tegra30/Kconfig @@ -1,5 +1,11 @@ if TEGRA30 +config TEGRA_VDD_CORE_TPS62361B_SET3 + bool + +config TEGRA_VDD_CORE_TPS62366A_SET1 + bool + choice prompt "Tegra30 board select" optional @@ -11,10 +17,12 @@ config TARGET_APALIS_T30 config TARGET_BEAVER bool "NVIDIA Tegra30 Beaver evaluation board" select BOARD_LATE_INIT + select TEGRA_VDD_CORE_TPS62366A_SET1 config TARGET_CARDHU bool "NVIDIA Tegra30 Cardhu evaluation board" select BOARD_LATE_INIT + select TEGRA_VDD_CORE_TPS62361B_SET3 config TARGET_COLIBRI_T30 bool "Toradex Colibri T30 board" diff --git a/configs/cei-tk1-som_defconfig b/configs/cei-tk1-som_defconfig index 58d75a52a08..0c4627aff05 100644 --- a/configs/cei-tk1-som_defconfig +++ b/configs/cei-tk1-som_defconfig @@ -12,6 +12,7 @@ CONFIG_SPL_TEXT_BASE=0x80108000 CONFIG_SYS_PROMPT="Tegra124 (TK1-SOM) # " CONFIG_TEGRA124=y CONFIG_TARGET_CEI_TK1_SOM=y +CONFIG_TEGRA_ENABLE_UARTD=y CONFIG_TEGRA_GPU=y CONFIG_ARMV7_PSCI_0_1=y CONFIG_SYS_LOAD_ADDR=0x81000000 diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index cc46f4eda41..5d29dae3411 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -11,6 +11,7 @@ CONFIG_SPL_TEXT_BASE=0x80108000 CONFIG_SYS_PROMPT="Tegra114 (Dalmore) # " CONFIG_TEGRA114=y CONFIG_TARGET_DALMORE=y +CONFIG_TEGRA_ENABLE_UARTD=y CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig index 353d1a33fab..c8694bba681 100644 --- a/configs/harmony_defconfig +++ b/configs/harmony_defconfig @@ -10,6 +10,7 @@ CONFIG_SPL_TEXT_BASE=0x00108000 CONFIG_SYS_PROMPT="Tegra20 (Harmony) # " CONFIG_TEGRA20=y CONFIG_TARGET_HARMONY=y +CONFIG_TEGRA_ENABLE_UARTD=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_STDIO_DEREGISTER=y diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index b391a86c022..d935e784ab4 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -12,6 +12,7 @@ CONFIG_SPL_TEXT_BASE=0x80108000 CONFIG_SYS_PROMPT="Tegra124 (Jetson TK1) # " CONFIG_TEGRA124=y CONFIG_TARGET_JETSON_TK1=y +CONFIG_TEGRA_ENABLE_UARTD=y CONFIG_TEGRA_GPU=y CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_OF_SYSTEM_SETUP=y diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig index 76e4eb3078c..563e01459af 100644 --- a/configs/medcom-wide_defconfig +++ b/configs/medcom-wide_defconfig @@ -10,6 +10,7 @@ CONFIG_SPL_TEXT_BASE=0x00108000 CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # " CONFIG_TEGRA20=y CONFIG_TARGET_MEDCOM_WIDE=y +CONFIG_TEGRA_ENABLE_UARTD=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig index 170ac86468d..789b5d93982 100644 --- a/configs/plutux_defconfig +++ b/configs/plutux_defconfig @@ -10,6 +10,7 @@ CONFIG_SPL_TEXT_BASE=0x00108000 CONFIG_SYS_PROMPT="Tegra20 (Plutux) # " CONFIG_TEGRA20=y CONFIG_TARGET_PLUTUX=y +CONFIG_TEGRA_ENABLE_UARTD=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index 2375040a9ec..dc9225188fa 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -10,6 +10,7 @@ CONFIG_SPL_TEXT_BASE=0x00108000 CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # " CONFIG_TEGRA20=y CONFIG_TARGET_SEABOARD=y +CONFIG_TEGRA_ENABLE_UARTD=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_USE_PREBOOT=y diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig index 02d6b496f96..8c3f8d5e065 100644 --- a/configs/tec-ng_defconfig +++ b/configs/tec-ng_defconfig @@ -10,6 +10,7 @@ CONFIG_SPL_TEXT_BASE=0x80108000 CONFIG_SYS_PROMPT="Tegra30 (TEC-NG) # " CONFIG_TEGRA30=y CONFIG_TARGET_TEC_NG=y +CONFIG_TEGRA_ENABLE_UARTD=y CONFIG_SYS_LOAD_ADDR=0x81000000 CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y diff --git a/configs/tec_defconfig b/configs/tec_defconfig index 967d3050eff..a1900f0181d 100644 --- a/configs/tec_defconfig +++ b/configs/tec_defconfig @@ -10,6 +10,7 @@ CONFIG_SPL_TEXT_BASE=0x00108000 CONFIG_SYS_PROMPT="Tegra20 (TEC) # " CONFIG_TEGRA20=y CONFIG_TARGET_TEC=y +CONFIG_TEGRA_ENABLE_UARTD=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_FIT=y CONFIG_OF_SYSTEM_SETUP=y diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index 3c924ec9eae..3d94f454be2 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -10,6 +10,7 @@ CONFIG_SPL_TEXT_BASE=0x00108000 CONFIG_SYS_PROMPT="Tegra20 (Ventana) # " CONFIG_TEGRA20=y CONFIG_TARGET_VENTANA=y +CONFIG_TEGRA_ENABLE_UARTD=y CONFIG_SYS_LOAD_ADDR=0x1000000 CONFIG_OF_SYSTEM_SETUP=y CONFIG_USE_PREBOOT=y diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index 1d478078b2c..71d4727ca98 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -13,7 +13,6 @@ #include "tegra124-common.h" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define FDT_MODULE "apalis-v1.2" diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h index 4f00b3bad3f..80204d706d1 100644 --- a/include/configs/apalis_t30.h +++ b/include/configs/apalis_t30.h @@ -20,7 +20,6 @@ * Apalis UART3: NVIDIA UARTB * Apalis UART4: NVIDIA UARTC */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define UBOOT_UPDATE \ diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 7078c2745c8..7e0e4779607 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -10,14 +10,10 @@ #include "tegra30-common.h" -/* VDD core PMIC */ -#define CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 - /* High-level configuration options */ #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Beaver" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #include "tegra-common-post.h" diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 5cca1e18348..64d713a1969 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -10,9 +10,6 @@ #include "tegra30-common.h" -/* VDD core PMIC */ -#define CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 - /* High-level configuration options */ #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Cardhu" @@ -21,7 +18,6 @@ "fdtfile=tegra30-cardhu-a04.dtb\0" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #include "tegra-common-post.h" diff --git a/include/configs/cei-tk1-som.h b/include/configs/cei-tk1-som.h index e3519ed7516..e49eb602081 100644 --- a/include/configs/cei-tk1-som.h +++ b/include/configs/cei-tk1-som.h @@ -19,7 +19,6 @@ #define CONFIG_TEGRA_BOARD_STRING "CEI tk1-som" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #include "tegra-common-post.h" diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index 2ba3c3bc87d..ea7d648eb6a 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -11,8 +11,6 @@ #include "tegra20-common.h" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA -#define CONFIG_TEGRA_UARTA_SDIO1 #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE /* NAND support */ diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h index ffed71a2e82..7edb2c0b26d 100644 --- a/include/configs/colibri_t30.h +++ b/include/configs/colibri_t30.h @@ -21,7 +21,6 @@ * Colibri UART-B: NVIDIA UARTD * Colibri UART-C: NVIDIA UARTB */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define UBOOT_UPDATE \ diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index 82b2efdfe89..c9009e39623 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -14,7 +14,6 @@ #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Dalmore" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* Environment in eMMC, at the end of 2nd "boot sector" */ diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 211dab4d233..a1a66bfb64e 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -14,7 +14,6 @@ #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Harmony" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: keyboard satellite board UART, default */ #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index ea4964b13d6..aa9e1d811a5 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -15,7 +15,6 @@ #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Jetson TK1" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #include "tegra-common-post.h" diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index a8d8d8b09e0..efac0febdf8 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -15,7 +15,6 @@ #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Medcom-Wide" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h index 21002f99dc8..e885526e625 100644 --- a/include/configs/nyan-big.h +++ b/include/configs/nyan-big.h @@ -15,7 +15,6 @@ #define CONFIG_TEGRA_BOARD_STRING "Google/NVIDIA Nyan-big" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #include "tegra-common-post.h" diff --git a/include/configs/p2371-0000.h b/include/configs/p2371-0000.h index 653b4c583ad..f426889e1c4 100644 --- a/include/configs/p2371-0000.h +++ b/include/configs/p2371-0000.h @@ -15,7 +15,6 @@ #define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2371-0000" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA /* Environment in eMMC, at the end of 2nd "boot sector" */ diff --git a/include/configs/p2371-2180.h b/include/configs/p2371-2180.h index 2913d5304be..24adf4e13f0 100644 --- a/include/configs/p2371-2180.h +++ b/include/configs/p2371-2180.h @@ -15,7 +15,6 @@ #define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2371-2180" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA /* Environment in eMMC, at the end of 2nd "boot sector" */ diff --git a/include/configs/p2571.h b/include/configs/p2571.h index e78e3c4d6b0..8a1e7d9b968 100644 --- a/include/configs/p2571.h +++ b/include/configs/p2571.h @@ -15,7 +15,6 @@ #define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2571" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA /* Environment in eMMC, at the end of 2nd "boot sector" */ diff --git a/include/configs/p3450-0000.h b/include/configs/p3450-0000.h index bab02dc2d6e..078d35dde2c 100644 --- a/include/configs/p3450-0000.h +++ b/include/configs/p3450-0000.h @@ -14,7 +14,6 @@ #define CONFIG_TEGRA_BOARD_STRING "NVIDIA P3450-0000" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA /* Only MMC/PXE/DHCP for now, add USB back in later when supported */ #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index a945f4e9b28..898167009f6 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -16,7 +16,6 @@ #define CONFIG_TEGRA_BOARD_STRING "Compal Paz00" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE /* Environment in eMMC, at the end of 2nd "boot sector" */ diff --git a/include/configs/plutux.h b/include/configs/plutux.h index 99db59c489e..1d8ac618c0b 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -15,7 +15,6 @@ #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Plutux" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index f272fe9bf8f..e5d672746b1 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -15,7 +15,6 @@ #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* Environment in eMMC, at the end of 2nd "boot sector" */ diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h index c98322cf084..ae879abe3f8 100644 --- a/include/configs/tec-ng.h +++ b/include/configs/tec-ng.h @@ -13,7 +13,6 @@ #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten™ NG Evaluation Carrier" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #include "tegra-common-post.h" diff --git a/include/configs/tec.h b/include/configs/tec.h index ddf753da4a9..e8a9df756d5 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -15,7 +15,6 @@ #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 69acabf19fd..2c668e0611b 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -73,8 +73,4 @@ BOOTENV \ BOARD_EXTRA_ENV_SETTINGS -#if defined(CONFIG_TEGRA20_SFLASH) || defined(CONFIG_TEGRA20_SLINK) || defined(CONFIG_TEGRA114_SPI) -#define CONFIG_TEGRA_SPI -#endif - #endif /* __TEGRA_COMMON_POST_H */ diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index e4cbc7da843..b5bf9912201 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -14,8 +14,6 @@ #define CONFIG_TEGRA_BOARD_STRING "Compulab Trimslice" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA -#define CONFIG_TEGRA_UARTA_GPU #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE /* SPI */ diff --git a/include/configs/venice2.h b/include/configs/venice2.h index a4eb4bf4aaf..970893ca17b 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -15,7 +15,6 @@ #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Venice2" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTA #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE /* Environment in eMMC, at the end of 2nd "boot sector" */ diff --git a/include/configs/ventana.h b/include/configs/ventana.h index f7a507768ec..e7b7b911d9b 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -14,7 +14,6 @@ #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Ventana" /* Board-specific serial config */ -#define CONFIG_TEGRA_ENABLE_UARTD #define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* Environment in eMMC, at the end of 2nd "boot sector" */ From 60910a3f0267ccf2f87f1205aa3fb76491e674b5 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:46 -0500 Subject: [PATCH 36/41] Convert CONFIG_THOR_RESET_OFF to Kconfig This converts the following to Kconfig: CONFIG_THOR_RESET_OFF Signed-off-by: Tom Rini --- cmd/Kconfig | 4 ++++ configs/topic_miami_defconfig | 1 + configs/topic_miamilite_defconfig | 1 + configs/topic_miamiplus_defconfig | 1 + configs/xilinx_zynq_virt_defconfig | 1 + configs/xilinx_zynqmp_virt_defconfig | 1 + include/configs/xilinx_versal.h | 1 - include/configs/xilinx_versal_net.h | 1 - include/configs/xilinx_zynqmp.h | 1 - include/configs/zynq-common.h | 1 - 10 files changed, 9 insertions(+), 4 deletions(-) diff --git a/cmd/Kconfig b/cmd/Kconfig index d93731f2af6..47d2ef04a2a 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -526,6 +526,10 @@ config CMD_THOR_DOWNLOAD There is no documentation about this within the U-Boot source code but you should be able to find something on the interwebs. +config THOR_RESET_OFF + bool "thor: Disable reset on completion" + depends on CMD_THOR_DOWNLOAD + config CMD_ZBOOT bool "zboot - x86 boot command" help diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig index ece625f6292..2ae1fb82797 100644 --- a/configs/topic_miami_defconfig +++ b/configs/topic_miami_defconfig @@ -40,6 +40,7 @@ CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=2077 CONFIG_SYS_BOOTM_LEN=0x3c00000 CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_THOR_RESET_OFF=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y CONFIG_CMD_I2C=y diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig index 693a602ea39..510ff2ebd87 100644 --- a/configs/topic_miamilite_defconfig +++ b/configs/topic_miamilite_defconfig @@ -40,6 +40,7 @@ CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=2077 CONFIG_SYS_BOOTM_LEN=0x3c00000 CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_THOR_RESET_OFF=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y CONFIG_CMD_I2C=y diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig index 97624e69e72..0b708cccf6e 100644 --- a/configs/topic_miamiplus_defconfig +++ b/configs/topic_miamiplus_defconfig @@ -40,6 +40,7 @@ CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=2077 CONFIG_SYS_BOOTM_LEN=0x3c00000 CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_THOR_RESET_OFF=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y CONFIG_CMD_I2C=y diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig index 50685657690..610d9de2a63 100644 --- a/configs/xilinx_zynq_virt_defconfig +++ b/configs/xilinx_zynq_virt_defconfig @@ -51,6 +51,7 @@ CONFIG_SYS_PBSIZE=2071 CONFIG_SYS_BOOTM_LEN=0x3c00000 CONFIG_CMD_IMLS=y CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_THOR_RESET_OFF=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 4732c39bdbe..ab2a5426518 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -55,6 +55,7 @@ CONFIG_SYS_PBSIZE=2073 CONFIG_SYS_BOOTM_LEN=0x6400000 CONFIG_CMD_BOOTMENU=y CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_THOR_RESET_OFF=y CONFIG_CMD_GREPENV=y CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_MEMTEST=y diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index ee3130ed327..6ee6786e054 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -25,7 +25,6 @@ #if defined(CONFIG_CMD_DFU) #define DFU_DEFAULT_POLL_TIMEOUT 300 -#define CONFIG_THOR_RESET_OFF #endif /* Ethernet driver */ diff --git a/include/configs/xilinx_versal_net.h b/include/configs/xilinx_versal_net.h index 7d77189693e..37bdb214629 100644 --- a/include/configs/xilinx_versal_net.h +++ b/include/configs/xilinx_versal_net.h @@ -25,7 +25,6 @@ #if defined(CONFIG_CMD_DFU) #define DFU_DEFAULT_POLL_TIMEOUT 300 -#define CONFIG_THOR_RESET_OFF #define DFU_ALT_INFO_RAM \ "dfu_ram_info=" \ "setenv dfu_alt_info " \ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index efe241df97e..f71cd660993 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -31,7 +31,6 @@ #if defined(CONFIG_ZYNQMP_USB) #define DFU_DEFAULT_POLL_TIMEOUT 300 -#define CONFIG_THOR_RESET_OFF # define PARTS_DEFAULT \ "partitions=uuid_disk=${uuid_gpt_disk};" \ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 37b54289073..d95178eb642 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -38,7 +38,6 @@ #ifdef CONFIG_USB_EHCI_ZYNQ # define DFU_DEFAULT_POLL_TIMEOUT 300 -# define CONFIG_THOR_RESET_OFF #endif /* enable preboot to be loaded before CONFIG_BOOTDELAY */ From 4fd9373bbb3f160c2975fc9de2fab49040141833 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:47 -0500 Subject: [PATCH 37/41] net: Remove more legacy functions Remove some of the board and arch specific non-DM_ETH helper code. Signed-off-by: Tom Rini --- arch/arm/cpu/armv7/ls102xa/cpu.c | 9 --------- arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 3 --- arch/powerpc/cpu/mpc83xx/cpu.c | 18 ----------------- arch/powerpc/cpu/mpc8xxx/cpu.c | 26 ------------------------- drivers/net/qe/uec.h | 1 - include/configs/km/km-mpc83xx.h | 5 ----- include/fm_eth.h | 1 - include/netdev.h | 1 - 8 files changed, 64 deletions(-) diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c index 25e4b49c70e..c455969609f 100644 --- a/arch/arm/cpu/armv7/ls102xa/cpu.c +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c @@ -302,15 +302,6 @@ int cpu_mmc_init(struct bd_info *bis) } #endif -int cpu_eth_init(struct bd_info *bis) -{ -#if defined(CONFIG_TSEC_ENET) && !defined(CONFIG_DM_ETH) - tsec_standard_init(bis); -#endif - - return 0; -} - int arch_cpu_init(void) { void *epu_base = (void *)(CFG_SYS_DCSRBAR + EPU_BLOCK_OFFSET); diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 99413ef52e2..2aeec7dea7b 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -1057,9 +1057,6 @@ int cpu_eth_init(struct bd_info *bis) #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) error = fsl_mc_ldpaa_init(bis); -#endif -#ifdef CONFIG_FMAN_ENET - fm_standard_init(bis); #endif return error; } diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c index 8d531898bd8..a6c063556e8 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu.c +++ b/arch/powerpc/cpu/mpc83xx/cpu.c @@ -180,24 +180,6 @@ void watchdog_reset (void) } #endif -#ifndef CONFIG_DM_ETH -/* - * Initializes on-chip ethernet controllers. - * to override, implement board_eth_init() - */ -int cpu_eth_init(struct bd_info *bis) -{ -#if defined(CONFIG_UEC_ETH) - uec_standard_init(bis); -#endif - -#if defined(CONFIG_TSEC_ENET) - tsec_standard_init(bis); -#endif - return 0; -} -#endif /* !CONFIG_DM_ETH */ - /* * Initializes on-chip MMC controllers. * to override, implement board_mmc_init() diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 7f201909229..73d28f2a4e2 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -343,29 +343,3 @@ int fixup_cpu(void) #endif return 0; } - -#ifndef CONFIG_DM_ETH -/* - * Initializes on-chip ethernet controllers. - * to override, implement board_eth_init() - */ -int cpu_eth_init(struct bd_info *bis) -{ -#if defined(CONFIG_UEC_ETH) - uec_standard_init(bis); -#endif - -#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_MPC85XX_FEC) - tsec_standard_init(bis); -#endif - -#ifdef CONFIG_FMAN_ENET - fm_standard_init(bis); -#endif - -#ifdef CONFIG_VSC9953 - vsc9953_init(bis); -#endif - return 0; -} -#endif diff --git a/drivers/net/qe/uec.h b/drivers/net/qe/uec.h index 551d7061ccc..4510205da32 100644 --- a/drivers/net/qe/uec.h +++ b/drivers/net/qe/uec.h @@ -689,5 +689,4 @@ struct uec_priv { int uec_initialize(struct bd_info *bis, struct uec_inf *uec_info); int uec_eth_init(struct bd_info *bis, struct uec_inf *uecs, int num); -int uec_standard_init(struct bd_info *bis); #endif /* __UEC_H__ */ diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h index 1f03f95acef..c939caf2a1f 100644 --- a/include/configs/km/km-mpc83xx.h +++ b/include/configs/km/km-mpc83xx.h @@ -58,8 +58,3 @@ * the maximum mapped by the Linux kernel during initialization. */ #define CFG_SYS_BOOTMAPSZ (8 << 20) - -/* - * QE UEC ethernet configuration - */ -#define CONFIG_UEC_ETH diff --git a/include/fm_eth.h b/include/fm_eth.h index aeb640925ee..6012a449fd2 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -202,7 +202,6 @@ struct memac_mdio_info { int fm_tgec_mdio_init(struct bd_info *bis, struct tgec_mdio_info *info); int fm_memac_mdio_init(struct bd_info *bis, struct memac_mdio_info *info); -int fm_standard_init(struct bd_info *bis); void fman_enet_init(void); void fdt_fixup_fman_ethernet(void *fdt); phy_interface_t fm_info_get_enet_if(enum fm_port port); diff --git a/include/netdev.h b/include/netdev.h index b3f8584e900..2b4e474ed08 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -70,7 +70,6 @@ int sh_eth_initialize(struct bd_info *bis); int skge_initialize(struct bd_info *bis); int smc91111_initialize(u8 dev_num, phys_addr_t base_addr); int smc911x_initialize(u8 dev_num, phys_addr_t base_addr); -int uec_standard_init(struct bd_info *bis); int uli526x_initialize(struct bd_info *bis); int armada100_fec_register(unsigned long base_addr); From 8747decc9bda5512c2d7eff4c7cab178e5ad6152 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:48 -0500 Subject: [PATCH 38/41] net: vsc9953: Remove this driver No platforms enable this driver as there's no T1040D4RDB nor T1040RDB support at this time. Remove. Signed-off-by: Tom Rini --- board/freescale/t104xrdb/eth.c | 46 - drivers/net/Kconfig | 3 - drivers/net/Makefile | 1 - drivers/net/vsc9953.c | 2754 -------------------------------- 4 files changed, 2804 deletions(-) delete mode 100644 drivers/net/vsc9953.c diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c index fe51d68c7bb..c011aa96fbe 100644 --- a/board/freescale/t104xrdb/eth.c +++ b/board/freescale/t104xrdb/eth.c @@ -22,10 +22,6 @@ int board_eth_init(struct bd_info *bis) struct memac_mdio_info memac_mdio_info; unsigned int i; int phy_addr = 0; -#ifdef CONFIG_VSC9953 - phy_interface_t phy_int; - struct mii_dev *bus; -#endif printf("Initializing Fman\n"); @@ -107,48 +103,6 @@ int board_eth_init(struct bd_info *bis) DEFAULT_FM_MDIO_NAME)); } -#ifdef CONFIG_VSC9953 - /* SerDes configured for QSGMII */ - if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A) >= 0) { - for (i = 0; i < 4; i++) { - bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); - phy_addr = CFG_SYS_FM1_QSGMII11_PHY_ADDR + i; - phy_int = PHY_INTERFACE_MODE_QSGMII; - - vsc9953_port_info_set_mdio(i, bus); - vsc9953_port_info_set_phy_address(i, phy_addr); - vsc9953_port_info_set_phy_int(i, phy_int); - vsc9953_port_enable(i); - } - } - if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B) >= 0) { - for (i = 4; i < 8; i++) { - bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); - phy_addr = CFG_SYS_FM1_QSGMII21_PHY_ADDR + i - 4; - phy_int = PHY_INTERFACE_MODE_QSGMII; - - vsc9953_port_info_set_mdio(i, bus); - vsc9953_port_info_set_phy_address(i, phy_addr); - vsc9953_port_info_set_phy_int(i, phy_int); - vsc9953_port_enable(i); - } - } - - /* Connect DTSEC1 to L2 switch if it doesn't have a PHY */ - if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1) < 0) - vsc9953_port_enable(8); - - /* Connect DTSEC2 to L2 switch if it doesn't have a PHY */ - if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC2) < 0) { - /* Enable L2 On MAC2 using SCFG */ - struct ccsr_scfg *scfg = (struct ccsr_scfg *) - CFG_SYS_MPC85xx_SCFG; - - out_be32(&scfg->esgmiiselcr, in_be32(&scfg->esgmiiselcr) | - (0x80000000)); - vsc9953_port_enable(9); - } -#endif cpu_eth_init(bis); #endif diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 53fb69f5260..7873538cc2d 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -709,9 +709,6 @@ config XILINX_AXIMRMAC config VSC7385_ENET bool "Vitesse 7385 Switch Firmware Upload driver" -config VSC9953 - bool "Vitesse VSC9953 L2 Switch driver" - config XILINX_EMACLITE select PHYLIB select MII diff --git a/drivers/net/Makefile b/drivers/net/Makefile index d3fc6b7d3ee..5b4e60eea3e 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -87,7 +87,6 @@ obj-$(CONFIG_SUN8I_EMAC) += sun8i_emac.o obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o obj-$(CONFIG_TULIP) += dc2114x.o obj-$(CONFIG_VSC7385_ENET) += vsc7385.o -obj-$(CONFIG_VSC9953) += vsc9953.o obj-$(CONFIG_XILINX_AXIEMAC) += xilinx_axi_emac.o obj-$(CONFIG_XILINX_AXIMRMAC) += xilinx_axi_mrmac.o obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c deleted file mode 100644 index 29f26b4b332..00000000000 --- a/drivers/net/vsc9953.c +++ /dev/null @@ -1,2754 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2014 - 2015 Freescale Semiconductor, Inc. - * - * Driver for the Vitesse VSC9953 L2 Switch - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct vsc9953_info vsc9953_l2sw = { - .port[0] = VSC9953_PORT_INFO_INITIALIZER(0), - .port[1] = VSC9953_PORT_INFO_INITIALIZER(1), - .port[2] = VSC9953_PORT_INFO_INITIALIZER(2), - .port[3] = VSC9953_PORT_INFO_INITIALIZER(3), - .port[4] = VSC9953_PORT_INFO_INITIALIZER(4), - .port[5] = VSC9953_PORT_INFO_INITIALIZER(5), - .port[6] = VSC9953_PORT_INFO_INITIALIZER(6), - .port[7] = VSC9953_PORT_INFO_INITIALIZER(7), - .port[8] = VSC9953_PORT_INFO_INITIALIZER(8), - .port[9] = VSC9953_PORT_INFO_INITIALIZER(9), -}; - -void vsc9953_port_info_set_mdio(int port_no, struct mii_dev *bus) -{ - if (!VSC9953_PORT_CHECK(port_no)) - return; - - vsc9953_l2sw.port[port_no].bus = bus; -} - -void vsc9953_port_info_set_phy_address(int port_no, int address) -{ - if (!VSC9953_PORT_CHECK(port_no)) - return; - - vsc9953_l2sw.port[port_no].phyaddr = address; -} - -void vsc9953_port_info_set_phy_int(int port_no, phy_interface_t phy_int) -{ - if (!VSC9953_PORT_CHECK(port_no)) - return; - - vsc9953_l2sw.port[port_no].enet_if = phy_int; -} - -void vsc9953_port_enable(int port_no) -{ - if (!VSC9953_PORT_CHECK(port_no)) - return; - - vsc9953_l2sw.port[port_no].enabled = 1; -} - -void vsc9953_port_disable(int port_no) -{ - if (!VSC9953_PORT_CHECK(port_no)) - return; - - vsc9953_l2sw.port[port_no].enabled = 0; -} - -static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr, - int regnum, int value) -{ - int timeout = 50000; - - out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) | - ((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) | - (0x1 << 1)); - asm("sync"); - - while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout) - udelay(1); - - if (timeout == 0) - debug("Timeout waiting for MDIO write\n"); -} - -static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr, - int regnum) -{ - int value = 0xFFFF; - int timeout = 50000; - - while ((in_le32(&phyregs->miimstatus) & MIIMIND_OPR_PEND) && --timeout) - udelay(1); - if (timeout == 0) { - debug("Timeout waiting for MDIO operation to finish\n"); - return value; - } - - /* Put the address of the phy, and the register - * number into MIICMD - */ - out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) | - ((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) | - (0x2 << 1)); - - timeout = 50000; - /* Wait for the the indication that the read is done */ - while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout) - udelay(1); - if (timeout == 0) - debug("Timeout waiting for MDIO read\n"); - - /* Grab the value read from the PHY */ - value = in_le32(&phyregs->miimdata); - - if ((value & 0x00030000) == 0) - return value & 0x0000ffff; - - return value; -} - -static int init_phy(struct eth_device *dev) -{ - struct vsc9953_port_info *l2sw_port = dev->priv; - struct phy_device *phydev = NULL; - -#ifdef CONFIG_PHYLIB - if (!l2sw_port->bus) - return 0; - phydev = phy_connect(l2sw_port->bus, l2sw_port->phyaddr, dev, - l2sw_port->enet_if); - if (!phydev) { - printf("Failed to connect\n"); - return -1; - } - - phydev->supported &= SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full; - phydev->advertising = phydev->supported; - - l2sw_port->phydev = phydev; - - phy_config(phydev); -#endif - - return 0; -} - -static int vsc9953_port_init(int port_no) -{ - struct eth_device *dev; - - /* Internal ports never have a PHY */ - if (VSC9953_INTERNAL_PORT_CHECK(port_no)) - return 0; - - /* alloc eth device */ - dev = (struct eth_device *)calloc(1, sizeof(struct eth_device)); - if (!dev) - return -ENOMEM; - - sprintf(dev->name, "SW@PORT%d", port_no); - dev->priv = &vsc9953_l2sw.port[port_no]; - dev->init = NULL; - dev->halt = NULL; - dev->send = NULL; - dev->recv = NULL; - - if (init_phy(dev)) { - free(dev); - return -ENODEV; - } - - return 0; -} - -static int vsc9953_vlan_table_poll_idle(void) -{ - struct vsc9953_analyzer *l2ana_reg; - int timeout; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - timeout = 50000; - while (((in_le32(&l2ana_reg->ana_tables.vlan_access) & - VSC9953_VLAN_CMD_MASK) != VSC9953_VLAN_CMD_IDLE) && --timeout) - udelay(1); - - return timeout ? 0 : -EBUSY; -} - -#ifdef CONFIG_CMD_ETHSW -/* Add/remove a port to/from a VLAN */ -static void vsc9953_vlan_table_membership_set(int vid, u32 port_no, u8 add) -{ - u32 val; - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - if (vsc9953_vlan_table_poll_idle() < 0) { - debug("VLAN table timeout\n"); - return; - } - - val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); - val = bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, vid); - out_le32(&l2ana_reg->ana_tables.vlan_tidx, val); - - clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access, - VSC9953_VLAN_CMD_MASK, VSC9953_VLAN_CMD_READ); - - if (vsc9953_vlan_table_poll_idle() < 0) { - debug("VLAN table timeout\n"); - return; - } - - val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); - val = bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, vid); - out_le32(&l2ana_reg->ana_tables.vlan_tidx, val); - - val = in_le32(&l2ana_reg->ana_tables.vlan_access); - if (!add) { - val = bitfield_replace_by_mask(val, VSC9953_VLAN_CMD_MASK, - VSC9953_VLAN_CMD_WRITE) & - ~(bitfield_replace_by_mask(0, VSC9953_VLAN_PORT_MASK, - (1 << port_no))); - ; - } else { - val = bitfield_replace_by_mask(val, VSC9953_VLAN_CMD_MASK, - VSC9953_VLAN_CMD_WRITE) | - bitfield_replace_by_mask(0, VSC9953_VLAN_PORT_MASK, - (1 << port_no)); - } - out_le32(&l2ana_reg->ana_tables.vlan_access, val); - - /* wait for VLAN table command to flush */ - if (vsc9953_vlan_table_poll_idle() < 0) { - debug("VLAN table timeout\n"); - return; - } -} - -/* show VLAN membership for a port */ -static void vsc9953_vlan_membership_show(int port_no) -{ - u32 val; - struct vsc9953_analyzer *l2ana_reg; - u32 vid; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - printf("Port %d VLAN membership: ", port_no); - - for (vid = 0; vid < VSC9953_MAX_VLAN; vid++) { - if (vsc9953_vlan_table_poll_idle() < 0) { - debug("VLAN table timeout\n"); - return; - } - - val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); - val = bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, - vid); - out_le32(&l2ana_reg->ana_tables.vlan_tidx, val); - - clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access, - VSC9953_VLAN_CMD_MASK, VSC9953_VLAN_CMD_READ); - - if (vsc9953_vlan_table_poll_idle() < 0) { - debug("VLAN table timeout\n"); - return; - } - - val = in_le32(&l2ana_reg->ana_tables.vlan_access); - - if (bitfield_extract_by_mask(val, VSC9953_VLAN_PORT_MASK) & - (1 << port_no)) - printf("%d ", vid); - } - printf("\n"); -} -#endif - -/* vlan table set/clear all membership of vid */ -static void vsc9953_vlan_table_membership_all_set(int vid, int set_member) -{ - uint val; - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - if (vsc9953_vlan_table_poll_idle() < 0) { - debug("VLAN table timeout\n"); - return; - } - - /* read current vlan configuration */ - val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); - out_le32(&l2ana_reg->ana_tables.vlan_tidx, - bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, vid)); - - clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access, - VSC9953_VLAN_CMD_MASK, VSC9953_VLAN_CMD_READ); - - if (vsc9953_vlan_table_poll_idle() < 0) { - debug("VLAN table timeout\n"); - return; - } - - val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); - out_le32(&l2ana_reg->ana_tables.vlan_tidx, - bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, vid)); - - clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access, - VSC9953_VLAN_PORT_MASK | VSC9953_VLAN_CMD_MASK, - VSC9953_VLAN_CMD_WRITE | - (set_member ? VSC9953_VLAN_PORT_MASK : 0)); -} - -#ifdef CONFIG_CMD_ETHSW -/* Get PVID of a VSC9953 port */ -static int vsc9953_port_vlan_pvid_get(int port_nr, int *pvid) -{ - u32 val; - struct vsc9953_analyzer *l2ana_reg; - - /* Administrative down */ - if (!vsc9953_l2sw.port[port_nr].enabled) { - printf("Port %d is administrative down\n", port_nr); - return -1; - } - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - /* Get ingress PVID */ - val = in_le32(&l2ana_reg->port[port_nr].vlan_cfg); - *pvid = bitfield_extract_by_mask(val, VSC9953_VLAN_CFG_VID_MASK); - - return 0; -} -#endif - -/* Set PVID for a VSC9953 port */ -static void vsc9953_port_vlan_pvid_set(int port_no, int pvid) -{ - uint val; - struct vsc9953_analyzer *l2ana_reg; - struct vsc9953_rew_reg *l2rew_reg; - - /* Administrative down */ - if (!vsc9953_l2sw.port[port_no].enabled) { - printf("Port %d is administrative down\n", port_no); - return; - } - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + - VSC9953_REW_OFFSET); - - /* Set PVID on ingress */ - val = in_le32(&l2ana_reg->port[port_no].vlan_cfg); - val = bitfield_replace_by_mask(val, VSC9953_VLAN_CFG_VID_MASK, pvid); - out_le32(&l2ana_reg->port[port_no].vlan_cfg, val); - - /* Set PVID on egress */ - val = in_le32(&l2rew_reg->port[port_no].port_vlan_cfg); - val = bitfield_replace_by_mask(val, VSC9953_PORT_VLAN_CFG_VID_MASK, - pvid); - out_le32(&l2rew_reg->port[port_no].port_vlan_cfg, val); -} - -static void vsc9953_port_all_vlan_pvid_set(int pvid) -{ - int i; - - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_vlan_pvid_set(i, pvid); -} - -/* Enable/disable vlan aware of a VSC9953 port */ -static void vsc9953_port_vlan_aware_set(int port_no, int enabled) -{ - struct vsc9953_analyzer *l2ana_reg; - - /* Administrative down */ - if (!vsc9953_l2sw.port[port_no].enabled) { - printf("Port %d is administrative down\n", port_no); - return; - } - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - if (enabled) - setbits_le32(&l2ana_reg->port[port_no].vlan_cfg, - VSC9953_VLAN_CFG_AWARE_ENA); - else - clrbits_le32(&l2ana_reg->port[port_no].vlan_cfg, - VSC9953_VLAN_CFG_AWARE_ENA); -} - -/* Set all VSC9953 ports' vlan aware */ -static void vsc9953_port_all_vlan_aware_set(int enabled) -{ - int i; - - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_vlan_aware_set(i, enabled); -} - -/* Enable/disable vlan pop count of a VSC9953 port */ -static void vsc9953_port_vlan_popcnt_set(int port_no, int popcnt) -{ - uint val; - struct vsc9953_analyzer *l2ana_reg; - - /* Administrative down */ - if (!vsc9953_l2sw.port[port_no].enabled) { - printf("Port %d is administrative down\n", port_no); - return; - } - - if (popcnt > 3 || popcnt < 0) { - printf("Invalid pop count value: %d\n", port_no); - return; - } - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - val = in_le32(&l2ana_reg->port[port_no].vlan_cfg); - val = bitfield_replace_by_mask(val, VSC9953_VLAN_CFG_POP_CNT_MASK, - popcnt); - out_le32(&l2ana_reg->port[port_no].vlan_cfg, val); -} - -/* Set all VSC9953 ports' pop count */ -static void vsc9953_port_all_vlan_poncnt_set(int popcnt) -{ - int i; - - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_vlan_popcnt_set(i, popcnt); -} - -/* Enable/disable learning for frames dropped due to ingress filtering */ -static void vsc9953_vlan_ingr_fltr_learn_drop(int enable) -{ - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - if (enable) - setbits_le32(&l2ana_reg->ana.adv_learn, VSC9953_VLAN_CHK); - else - clrbits_le32(&l2ana_reg->ana.adv_learn, VSC9953_VLAN_CHK); -} - -enum aggr_code_mode { - AGGR_CODE_RAND = 0, - AGGR_CODE_ALL, /* S/D MAC, IPv4 S/D IP, IPv6 Flow Label, S/D PORT */ -}; - -/* Set aggregation code generation mode */ -static int vsc9953_aggr_code_set(enum aggr_code_mode ac) -{ - int rc; - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - switch (ac) { - case AGGR_CODE_RAND: - clrsetbits_le32(&l2ana_reg->common.aggr_cfg, - VSC9953_AC_DMAC_ENA | VSC9953_AC_SMAC_ENA | - VSC9953_AC_IP6_LBL_ENA | - VSC9953_AC_IP6_TCPUDP_ENA | - VSC9953_AC_IP4_SIPDIP_ENA | - VSC9953_AC_IP4_TCPUDP_ENA, VSC9953_AC_RND_ENA); - rc = 0; - break; - case AGGR_CODE_ALL: - clrsetbits_le32(&l2ana_reg->common.aggr_cfg, VSC9953_AC_RND_ENA, - VSC9953_AC_DMAC_ENA | VSC9953_AC_SMAC_ENA | - VSC9953_AC_IP6_LBL_ENA | - VSC9953_AC_IP6_TCPUDP_ENA | - VSC9953_AC_IP4_SIPDIP_ENA | - VSC9953_AC_IP4_TCPUDP_ENA); - rc = 0; - break; - default: - /* unknown mode for aggregation code */ - rc = -EINVAL; - } - - return rc; -} - -/* Egress untag modes of a VSC9953 port */ -enum egress_untag_mode { - EGRESS_UNTAG_ALL = 0, - EGRESS_UNTAG_PVID_AND_ZERO, - EGRESS_UNTAG_ZERO, - EGRESS_UNTAG_NONE, -}; - -#ifdef CONFIG_CMD_ETHSW -/* Get egress tagging configuration for a VSC9953 port */ -static int vsc9953_port_vlan_egr_untag_get(int port_no, - enum egress_untag_mode *mode) -{ - u32 val; - struct vsc9953_rew_reg *l2rew_reg; - - /* Administrative down */ - if (!vsc9953_l2sw.port[port_no].enabled) { - printf("Port %d is administrative down\n", port_no); - return -1; - } - - l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + - VSC9953_REW_OFFSET); - - val = in_le32(&l2rew_reg->port[port_no].port_tag_cfg); - - switch (val & VSC9953_TAG_CFG_MASK) { - case VSC9953_TAG_CFG_NONE: - *mode = EGRESS_UNTAG_ALL; - return 0; - case VSC9953_TAG_CFG_ALL_BUT_PVID_ZERO: - *mode = EGRESS_UNTAG_PVID_AND_ZERO; - return 0; - case VSC9953_TAG_CFG_ALL_BUT_ZERO: - *mode = EGRESS_UNTAG_ZERO; - return 0; - case VSC9953_TAG_CFG_ALL: - *mode = EGRESS_UNTAG_NONE; - return 0; - default: - printf("Unknown egress tagging configuration for port %d\n", - port_no); - return -1; - } -} - -/* Show egress tagging configuration for a VSC9953 port */ -static void vsc9953_port_vlan_egr_untag_show(int port_no) -{ - enum egress_untag_mode mode; - - if (vsc9953_port_vlan_egr_untag_get(port_no, &mode)) { - printf("%7d\t%17s\n", port_no, "-"); - return; - } - - printf("%7d\t", port_no); - switch (mode) { - case EGRESS_UNTAG_ALL: - printf("%17s\n", "all"); - break; - case EGRESS_UNTAG_NONE: - printf("%17s\n", "none"); - break; - case EGRESS_UNTAG_PVID_AND_ZERO: - printf("%17s\n", "PVID and 0"); - break; - case EGRESS_UNTAG_ZERO: - printf("%17s\n", "0"); - break; - default: - printf("%17s\n", "-"); - } -} -#endif - -static void vsc9953_port_vlan_egr_untag_set(int port_no, - enum egress_untag_mode mode) -{ - struct vsc9953_rew_reg *l2rew_reg; - - /* Administrative down */ - if (!vsc9953_l2sw.port[port_no].enabled) { - printf("Port %d is administrative down\n", port_no); - return; - } - - l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + - VSC9953_REW_OFFSET); - - switch (mode) { - case EGRESS_UNTAG_ALL: - clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, - VSC9953_TAG_CFG_MASK, VSC9953_TAG_CFG_NONE); - break; - case EGRESS_UNTAG_PVID_AND_ZERO: - clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, - VSC9953_TAG_CFG_MASK, - VSC9953_TAG_CFG_ALL_BUT_PVID_ZERO); - break; - case EGRESS_UNTAG_ZERO: - clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, - VSC9953_TAG_CFG_MASK, - VSC9953_TAG_CFG_ALL_BUT_ZERO); - break; - case EGRESS_UNTAG_NONE: - clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, - VSC9953_TAG_CFG_MASK, VSC9953_TAG_CFG_ALL); - break; - default: - printf("Unknown untag mode for port %d\n", port_no); - } -} - -static void vsc9953_port_all_vlan_egress_untagged_set( - enum egress_untag_mode mode) -{ - int i; - - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_vlan_egr_untag_set(i, mode); -} - -static int vsc9953_autoage_time_set(int age_period) -{ - u32 autoage; - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - if (age_period < 0 || age_period > VSC9953_AUTOAGE_PERIOD_MASK) - return -EINVAL; - - autoage = bitfield_replace_by_mask(in_le32(&l2ana_reg->ana.auto_age), - VSC9953_AUTOAGE_PERIOD_MASK, - age_period); - out_le32(&l2ana_reg->ana.auto_age, autoage); - - return 0; -} - -#ifdef CONFIG_CMD_ETHSW - -/* Enable/disable status of a VSC9953 port */ -static void vsc9953_port_status_set(int port_no, u8 enabled) -{ - struct vsc9953_qsys_reg *l2qsys_reg; - - /* Administrative down */ - if (!vsc9953_l2sw.port[port_no].enabled) - return; - - l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + - VSC9953_QSYS_OFFSET); - - if (enabled) - setbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no], - VSC9953_PORT_ENA); - else - clrbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no], - VSC9953_PORT_ENA); -} - -/* Start autonegotiation for a VSC9953 PHY */ -static void vsc9953_phy_autoneg(int port_no) -{ - if (!vsc9953_l2sw.port[port_no].phydev) - return; - - if (vsc9953_l2sw.port[port_no].phydev->drv->startup( - vsc9953_l2sw.port[port_no].phydev)) - printf("Failed to start PHY for port %d\n", port_no); -} - -/* Print a VSC9953 port's configuration */ -static void vsc9953_port_config_show(int port_no) -{ - int speed; - int duplex; - int link; - u8 enabled; - u32 val; - struct vsc9953_qsys_reg *l2qsys_reg; - - l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + - VSC9953_QSYS_OFFSET); - - val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_no]); - enabled = vsc9953_l2sw.port[port_no].enabled && - (val & VSC9953_PORT_ENA); - - /* internal ports (8 and 9) are fixed */ - if (VSC9953_INTERNAL_PORT_CHECK(port_no)) { - link = 1; - speed = SPEED_2500; - duplex = DUPLEX_FULL; - } else { - if (vsc9953_l2sw.port[port_no].phydev) { - link = vsc9953_l2sw.port[port_no].phydev->link; - speed = vsc9953_l2sw.port[port_no].phydev->speed; - duplex = vsc9953_l2sw.port[port_no].phydev->duplex; - } else { - link = -1; - speed = -1; - duplex = -1; - } - } - - printf("%8d ", port_no); - printf("%8s ", enabled == 1 ? "enabled" : "disabled"); - printf("%8s ", link == 1 ? "up" : "down"); - - switch (speed) { - case SPEED_10: - printf("%8d ", 10); - break; - case SPEED_100: - printf("%8d ", 100); - break; - case SPEED_1000: - printf("%8d ", 1000); - break; - case SPEED_2500: - printf("%8d ", 2500); - break; - case SPEED_10000: - printf("%8d ", 10000); - break; - default: - printf("%8s ", "-"); - } - - printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half"); -} - -/* Show VSC9953 ports' statistics */ -static void vsc9953_port_statistics_show(int port_no) -{ - u32 rx_val; - u32 tx_val; - struct vsc9953_system_reg *l2sys_reg; - - /* Administrative down */ - if (!vsc9953_l2sw.port[port_no].enabled) { - printf("Port %d is administrative down\n", port_no); - return; - } - - l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET + - VSC9953_SYS_OFFSET); - - printf("Statistics for L2 Switch port %d:\n", port_no); - - /* Set counter view for our port */ - out_le32(&l2sys_reg->sys.stat_cfg, port_no); - -#define VSC9953_STATS_PRINTF "%-15s %10u" - - /* Get number of Rx and Tx frames */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_short) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_frag) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_jabber) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_long) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_64) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_65_127) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_128_255) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_256_511) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_512_1023) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_1024_1526) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_jumbo); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_64) + - in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_65_127) + - in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_128_255) + - in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_256_511) + - in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_512_1023) + - in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_1024_1526) + - in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_jumbo); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx frames:", rx_val, "Tx frames:", tx_val); - - /* Get number of Rx and Tx bytes */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_oct); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_oct); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx bytes:", rx_val, "Tx bytes:", tx_val); - - /* Get number of Rx frames received ok and Tx frames sent ok */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_0) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_1) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_2) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_3) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_4) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_5) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_6) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_7) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_0) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_1) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_2) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_3) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_4) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_5) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_6) + - in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_7); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_64) + - in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_65_127) + - in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_128_255) + - in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_256_511) + - in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_512_1023) + - in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_1024_1526) + - in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_jumbo); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx frames ok:", rx_val, "Tx frames ok:", tx_val); - - /* Get number of Rx and Tx unicast frames */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_uc); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_uc); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx unicast:", rx_val, "Tx unicast:", tx_val); - - /* Get number of Rx and Tx broadcast frames */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_bc); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_bc); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx broadcast:", rx_val, "Tx broadcast:", tx_val); - - /* Get number of Rx and Tx frames of 64B */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_64); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_64); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx 64B:", rx_val, "Tx 64B:", tx_val); - - /* Get number of Rx and Tx frames with sizes between 65B and 127B */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_65_127); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_65_127); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx 65B-127B:", rx_val, "Tx 65B-127B:", tx_val); - - /* Get number of Rx and Tx frames with sizes between 128B and 255B */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_128_255); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_128_255); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx 128B-255B:", rx_val, "Tx 128B-255B:", tx_val); - - /* Get number of Rx and Tx frames with sizes between 256B and 511B */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_256_511); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_256_511); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx 256B-511B:", rx_val, "Tx 256B-511B:", tx_val); - - /* Get number of Rx and Tx frames with sizes between 512B and 1023B */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_512_1023); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_512_1023); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx 512B-1023B:", rx_val, "Tx 512B-1023B:", tx_val); - - /* Get number of Rx and Tx frames with sizes between 1024B and 1526B */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_1024_1526); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_1024_1526); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx 1024B-1526B:", rx_val, "Tx 1024B-1526B:", tx_val); - - /* Get number of Rx and Tx jumbo frames */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_jumbo); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_jumbo); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx jumbo:", rx_val, "Tx jumbo:", tx_val); - - /* Get number of Rx and Tx dropped frames */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_cat_drop) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_tail) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_0) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_1) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_2) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_3) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_4) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_5) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_6) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_7) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_0) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_1) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_2) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_3) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_4) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_5) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_6) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_7); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_drop) + - in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_aged); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx drops:", rx_val, "Tx drops:", tx_val); - - /* - * Get number of Rx frames with CRC or alignment errors - * and number of detected Tx collisions - */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_crc); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_col); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx CRC&align:", rx_val, "Tx coll:", tx_val); - - /* - * Get number of Rx undersized frames and - * number of Tx aged frames - */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_short); - tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_aged); - printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", - "Rx undersize:", rx_val, "Tx aged:", tx_val); - - /* Get number of Rx oversized frames */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_long); - printf(VSC9953_STATS_PRINTF"\n", "Rx oversized:", rx_val); - - /* Get number of Rx fragmented frames */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_frag); - printf(VSC9953_STATS_PRINTF"\n", "Rx fragments:", rx_val); - - /* Get number of Rx jabber errors */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_jabber); - printf(VSC9953_STATS_PRINTF"\n", "Rx jabbers:", rx_val); - - /* - * Get number of Rx frames filtered due to classification rules or - * no destination ports - */ - rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_cat_drop) + - in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_local); - printf(VSC9953_STATS_PRINTF"\n", "Rx filtered:", rx_val); - - printf("\n"); -} - -/* Clear statistics for a VSC9953 port */ -static void vsc9953_port_statistics_clear(int port_no) -{ - struct vsc9953_system_reg *l2sys_reg; - - /* Administrative down */ - if (!vsc9953_l2sw.port[port_no].enabled) { - printf("Port %d is administrative down\n", port_no); - return; - } - - l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET + - VSC9953_SYS_OFFSET); - - /* Clear all counter groups for our ports */ - out_le32(&l2sys_reg->sys.stat_cfg, port_no | - VSC9953_STAT_CLEAR_RX | VSC9953_STAT_CLEAR_TX | - VSC9953_STAT_CLEAR_DR); -} - -enum port_learn_mode { - PORT_LEARN_NONE, - PORT_LEARN_AUTO -}; - -/* Set learning configuration for a VSC9953 port */ -static void vsc9953_port_learn_mode_set(int port_no, enum port_learn_mode mode) -{ - struct vsc9953_analyzer *l2ana_reg; - - /* Administrative down */ - if (!vsc9953_l2sw.port[port_no].enabled) { - printf("Port %d is administrative down\n", port_no); - return; - } - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - switch (mode) { - case PORT_LEARN_NONE: - clrbits_le32(&l2ana_reg->port[port_no].port_cfg, - VSC9953_PORT_CFG_LEARN_DROP | - VSC9953_PORT_CFG_LEARN_CPU | - VSC9953_PORT_CFG_LEARN_AUTO | - VSC9953_PORT_CFG_LEARN_ENA); - break; - case PORT_LEARN_AUTO: - clrsetbits_le32(&l2ana_reg->port[port_no].port_cfg, - VSC9953_PORT_CFG_LEARN_DROP | - VSC9953_PORT_CFG_LEARN_CPU, - VSC9953_PORT_CFG_LEARN_ENA | - VSC9953_PORT_CFG_LEARN_AUTO); - break; - default: - printf("Unknown learn mode for port %d\n", port_no); - } -} - -/* Get learning configuration for a VSC9953 port */ -static int vsc9953_port_learn_mode_get(int port_no, enum port_learn_mode *mode) -{ - u32 val; - struct vsc9953_analyzer *l2ana_reg; - - /* Administrative down */ - if (!vsc9953_l2sw.port[port_no].enabled) { - printf("Port %d is administrative down\n", port_no); - return -1; - } - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - /* For now we only support HW learning (auto) and no learning */ - val = in_le32(&l2ana_reg->port[port_no].port_cfg); - if ((val & (VSC9953_PORT_CFG_LEARN_ENA | - VSC9953_PORT_CFG_LEARN_AUTO)) == - (VSC9953_PORT_CFG_LEARN_ENA | VSC9953_PORT_CFG_LEARN_AUTO)) - *mode = PORT_LEARN_AUTO; - else - *mode = PORT_LEARN_NONE; - - return 0; -} - -/* wait for FDB to become available */ -static int vsc9953_mac_table_poll_idle(void) -{ - struct vsc9953_analyzer *l2ana_reg; - u32 timeout; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - timeout = 50000; - while (((in_le32(&l2ana_reg->ana_tables.mac_access) & - VSC9953_MAC_CMD_MASK) != - VSC9953_MAC_CMD_IDLE) && --timeout) - udelay(1); - - return timeout ? 0 : -EBUSY; -} - -/* enum describing available commands for the MAC table */ -enum mac_table_cmd { - MAC_TABLE_READ, - MAC_TABLE_LOOKUP, - MAC_TABLE_WRITE, - MAC_TABLE_LEARN, - MAC_TABLE_FORGET, - MAC_TABLE_GET_NEXT, - MAC_TABLE_AGE, -}; - -/* Issues a command to the FDB table */ -static int vsc9953_mac_table_cmd(enum mac_table_cmd cmd) -{ - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - switch (cmd) { - case MAC_TABLE_READ: - clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, - VSC9953_MAC_CMD_MASK | VSC9953_MAC_CMD_VALID, - VSC9953_MAC_CMD_READ); - break; - case MAC_TABLE_LOOKUP: - clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, - VSC9953_MAC_CMD_MASK, VSC9953_MAC_CMD_READ | - VSC9953_MAC_CMD_VALID); - break; - case MAC_TABLE_WRITE: - clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, - VSC9953_MAC_CMD_MASK | - VSC9953_MAC_ENTRYTYPE_MASK, - VSC9953_MAC_CMD_WRITE | - VSC9953_MAC_ENTRYTYPE_LOCKED); - break; - case MAC_TABLE_LEARN: - clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, - VSC9953_MAC_CMD_MASK | - VSC9953_MAC_ENTRYTYPE_MASK, - VSC9953_MAC_CMD_LEARN | - VSC9953_MAC_ENTRYTYPE_LOCKED | - VSC9953_MAC_CMD_VALID); - break; - case MAC_TABLE_FORGET: - clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, - VSC9953_MAC_CMD_MASK | - VSC9953_MAC_ENTRYTYPE_MASK, - VSC9953_MAC_CMD_FORGET); - break; - case MAC_TABLE_GET_NEXT: - clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, - VSC9953_MAC_CMD_MASK | - VSC9953_MAC_ENTRYTYPE_MASK, - VSC9953_MAC_CMD_NEXT); - break; - case MAC_TABLE_AGE: - clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, - VSC9953_MAC_CMD_MASK | - VSC9953_MAC_ENTRYTYPE_MASK, - VSC9953_MAC_CMD_AGE); - break; - default: - printf("Unknown MAC table command\n"); - } - - if (vsc9953_mac_table_poll_idle() < 0) { - debug("MAC table timeout\n"); - return -1; - } - - return 0; -} - -/* show the FDB entries that correspond to a port and a VLAN */ -static void vsc9953_mac_table_show(int port_no, int vid) -{ - int rc[VSC9953_MAX_PORTS]; - enum port_learn_mode mode[VSC9953_MAX_PORTS]; - int i; - u32 val; - u32 vlan; - u32 mach; - u32 macl; - u32 dest_indx; - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - /* disable auto learning */ - if (port_no == ETHSW_CMD_PORT_ALL) { - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - rc[i] = vsc9953_port_learn_mode_get(i, &mode[i]); - if (!rc[i] && mode[i] != PORT_LEARN_NONE) - vsc9953_port_learn_mode_set(i, PORT_LEARN_NONE); - } - } else { - rc[port_no] = vsc9953_port_learn_mode_get(port_no, - &mode[port_no]); - if (!rc[port_no] && mode[port_no] != PORT_LEARN_NONE) - vsc9953_port_learn_mode_set(port_no, PORT_LEARN_NONE); - } - - /* write port and vid to get selected FDB entries */ - val = in_le32(&l2ana_reg->ana.anag_efil); - if (port_no != ETHSW_CMD_PORT_ALL) { - val = bitfield_replace_by_mask(val, VSC9953_AGE_PORT_MASK, - port_no) | VSC9953_AGE_PORT_EN; - } - if (vid != ETHSW_CMD_VLAN_ALL) { - val = bitfield_replace_by_mask(val, VSC9953_AGE_VID_MASK, - vid) | VSC9953_AGE_VID_EN; - } - out_le32(&l2ana_reg->ana.anag_efil, val); - - /* set MAC and VLAN to 0 to look from beginning */ - clrbits_le32(&l2ana_reg->ana_tables.mach_data, - VSC9953_MAC_VID_MASK | VSC9953_MAC_MACH_MASK); - out_le32(&l2ana_reg->ana_tables.macl_data, 0); - - /* get entries */ - printf("%10s %17s %5s %4s\n", "EntryType", "MAC", "PORT", "VID"); - do { - if (vsc9953_mac_table_cmd(MAC_TABLE_GET_NEXT) < 0) { - debug("GET NEXT MAC table command failed\n"); - break; - } - - val = in_le32(&l2ana_reg->ana_tables.mac_access); - - /* get out when an invalid entry is found */ - if (!(val & VSC9953_MAC_CMD_VALID)) - break; - - switch (val & VSC9953_MAC_ENTRYTYPE_MASK) { - case VSC9953_MAC_ENTRYTYPE_NORMAL: - printf("%10s ", "Dynamic"); - break; - case VSC9953_MAC_ENTRYTYPE_LOCKED: - printf("%10s ", "Static"); - break; - case VSC9953_MAC_ENTRYTYPE_IPV4MCAST: - printf("%10s ", "IPv4 Mcast"); - break; - case VSC9953_MAC_ENTRYTYPE_IPV6MCAST: - printf("%10s ", "IPv6 Mcast"); - break; - default: - printf("%10s ", "Unknown"); - } - - dest_indx = bitfield_extract_by_mask(val, - VSC9953_MAC_DESTIDX_MASK); - - val = in_le32(&l2ana_reg->ana_tables.mach_data); - vlan = bitfield_extract_by_mask(val, VSC9953_MAC_VID_MASK); - mach = bitfield_extract_by_mask(val, VSC9953_MAC_MACH_MASK); - macl = in_le32(&l2ana_reg->ana_tables.macl_data); - - printf("%02x:%02x:%02x:%02x:%02x:%02x ", (mach >> 8) & 0xff, - mach & 0xff, (macl >> 24) & 0xff, (macl >> 16) & 0xff, - (macl >> 8) & 0xff, macl & 0xff); - printf("%5d ", dest_indx); - printf("%4d\n", vlan); - } while (1); - - /* set learning mode to previous value */ - if (port_no == ETHSW_CMD_PORT_ALL) { - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - if (!rc[i] && mode[i] != PORT_LEARN_NONE) - vsc9953_port_learn_mode_set(i, mode[i]); - } - } else { - /* If administrative down, skip */ - if (!rc[port_no] && mode[port_no] != PORT_LEARN_NONE) - vsc9953_port_learn_mode_set(port_no, mode[port_no]); - } - - /* reset FDB port and VLAN FDB selection */ - clrbits_le32(&l2ana_reg->ana.anag_efil, VSC9953_AGE_PORT_EN | - VSC9953_AGE_PORT_MASK | VSC9953_AGE_VID_EN | - VSC9953_AGE_VID_MASK); -} - -/* Add a static FDB entry */ -static int vsc9953_mac_table_add(u8 port_no, uchar mac[6], int vid) -{ - u32 val; - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - val = in_le32(&l2ana_reg->ana_tables.mach_data); - val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | - (mac[0] << 8) | (mac[1] << 0); - out_le32(&l2ana_reg->ana_tables.mach_data, val); - - out_le32(&l2ana_reg->ana_tables.macl_data, - (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | - (mac[5] << 0)); - - /* set on which port is the MAC address added */ - val = in_le32(&l2ana_reg->ana_tables.mac_access); - val = bitfield_replace_by_mask(val, VSC9953_MAC_DESTIDX_MASK, port_no); - out_le32(&l2ana_reg->ana_tables.mac_access, val); - - if (vsc9953_mac_table_cmd(MAC_TABLE_LEARN) < 0) - return -1; - - /* check if the MAC address was indeed added */ - val = in_le32(&l2ana_reg->ana_tables.mach_data); - val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | - (mac[0] << 8) | (mac[1] << 0); - out_le32(&l2ana_reg->ana_tables.mach_data, val); - - out_le32(&l2ana_reg->ana_tables.macl_data, - (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | - (mac[5] << 0)); - - if (vsc9953_mac_table_cmd(MAC_TABLE_READ) < 0) - return -1; - - val = in_le32(&l2ana_reg->ana_tables.mac_access); - - if ((port_no != bitfield_extract_by_mask(val, - VSC9953_MAC_DESTIDX_MASK))) { - printf("Failed to add MAC address\n"); - return -1; - } - return 0; -} - -/* Delete a FDB entry */ -static int vsc9953_mac_table_del(uchar mac[6], u16 vid) -{ - u32 val; - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - /* check first if MAC entry is present */ - val = in_le32(&l2ana_reg->ana_tables.mach_data); - val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | - (mac[0] << 8) | (mac[1] << 0); - out_le32(&l2ana_reg->ana_tables.mach_data, val); - - out_le32(&l2ana_reg->ana_tables.macl_data, - (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | - (mac[5] << 0)); - - if (vsc9953_mac_table_cmd(MAC_TABLE_LOOKUP) < 0) { - debug("Lookup in the MAC table failed\n"); - return -1; - } - - if (!(in_le32(&l2ana_reg->ana_tables.mac_access) & - VSC9953_MAC_CMD_VALID)) { - printf("The MAC address: %02x:%02x:%02x:%02x:%02x:%02x ", - mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); - printf("VLAN: %d does not exist.\n", vid); - return -1; - } - - /* FDB entry found, proceed to delete */ - val = in_le32(&l2ana_reg->ana_tables.mach_data); - val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | - (mac[0] << 8) | (mac[1] << 0); - out_le32(&l2ana_reg->ana_tables.mach_data, val); - - out_le32(&l2ana_reg->ana_tables.macl_data, (mac[2] << 24) | - (mac[3] << 16) | (mac[4] << 8) | (mac[5] << 0)); - - if (vsc9953_mac_table_cmd(MAC_TABLE_FORGET) < 0) - return -1; - - /* check if the MAC entry is still in FDB */ - val = in_le32(&l2ana_reg->ana_tables.mach_data); - val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | - (mac[0] << 8) | (mac[1] << 0); - out_le32(&l2ana_reg->ana_tables.mach_data, val); - - out_le32(&l2ana_reg->ana_tables.macl_data, (mac[2] << 24) | - (mac[3] << 16) | (mac[4] << 8) | (mac[5] << 0)); - - if (vsc9953_mac_table_cmd(MAC_TABLE_LOOKUP) < 0) { - debug("Lookup in the MAC table failed\n"); - return -1; - } - if (in_le32(&l2ana_reg->ana_tables.mac_access) & - VSC9953_MAC_CMD_VALID) { - printf("Failed to delete MAC address\n"); - return -1; - } - - return 0; -} - -/* age the unlocked entries in FDB */ -static void vsc9953_mac_table_age(int port_no, int vid) -{ - int rc[VSC9953_MAX_PORTS]; - enum port_learn_mode mode[VSC9953_MAX_PORTS]; - u32 val; - int i; - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - /* set port and VID for selective aging */ - val = in_le32(&l2ana_reg->ana.anag_efil); - if (port_no != ETHSW_CMD_PORT_ALL) { - /* disable auto learning */ - rc[port_no] = vsc9953_port_learn_mode_get(port_no, - &mode[port_no]); - if (!rc[port_no] && mode[port_no] != PORT_LEARN_NONE) - vsc9953_port_learn_mode_set(port_no, PORT_LEARN_NONE); - - val = bitfield_replace_by_mask(val, VSC9953_AGE_PORT_MASK, - port_no) | VSC9953_AGE_PORT_EN; - } else { - /* disable auto learning on all ports */ - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - rc[i] = vsc9953_port_learn_mode_get(i, &mode[i]); - if (!rc[i] && mode[i] != PORT_LEARN_NONE) - vsc9953_port_learn_mode_set(i, PORT_LEARN_NONE); - } - } - - if (vid != ETHSW_CMD_VLAN_ALL) { - val = bitfield_replace_by_mask(val, VSC9953_AGE_VID_MASK, vid) | - VSC9953_AGE_VID_EN; - } - out_le32(&l2ana_reg->ana.anag_efil, val); - - /* age the dynamic FDB entries */ - vsc9953_mac_table_cmd(MAC_TABLE_AGE); - - /* clear previously set port and VID */ - clrbits_le32(&l2ana_reg->ana.anag_efil, VSC9953_AGE_PORT_EN | - VSC9953_AGE_PORT_MASK | VSC9953_AGE_VID_EN | - VSC9953_AGE_VID_MASK); - - if (port_no != ETHSW_CMD_PORT_ALL) { - if (!rc[port_no] && mode[port_no] != PORT_LEARN_NONE) - vsc9953_port_learn_mode_set(port_no, mode[port_no]); - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - if (!rc[i] && mode[i] != PORT_LEARN_NONE) - vsc9953_port_learn_mode_set(i, mode[i]); - } - } -} - -/* Delete all the dynamic FDB entries */ -static void vsc9953_mac_table_flush(int port, int vid) -{ - vsc9953_mac_table_age(port, vid); - vsc9953_mac_table_age(port, vid); -} - -enum egress_vlan_tag { - EGR_TAG_CLASS = 0, - EGR_TAG_PVID, -}; - -/* Set egress tag mode for a VSC9953 port */ -static void vsc9953_port_vlan_egress_tag_set(int port_no, - enum egress_vlan_tag mode) -{ - struct vsc9953_rew_reg *l2rew_reg; - - l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + - VSC9953_REW_OFFSET); - - switch (mode) { - case EGR_TAG_CLASS: - clrbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, - VSC9953_TAG_VID_PVID); - break; - case EGR_TAG_PVID: - setbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, - VSC9953_TAG_VID_PVID); - break; - default: - printf("Unknown egress VLAN tag mode for port %d\n", port_no); - } -} - -/* Get egress tag mode for a VSC9953 port */ -static void vsc9953_port_vlan_egress_tag_get(int port_no, - enum egress_vlan_tag *mode) -{ - u32 val; - struct vsc9953_rew_reg *l2rew_reg; - - l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + - VSC9953_REW_OFFSET); - - val = in_le32(&l2rew_reg->port[port_no].port_tag_cfg); - if (val & VSC9953_TAG_VID_PVID) - *mode = EGR_TAG_PVID; - else - *mode = EGR_TAG_CLASS; -} - -/* VSC9953 VLAN learning modes */ -enum vlan_learning_mode { - SHARED_VLAN_LEARNING, - PRIVATE_VLAN_LEARNING, -}; - -/* Set VLAN learning mode for VSC9953 */ -static void vsc9953_vlan_learning_set(enum vlan_learning_mode lrn_mode) -{ - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - switch (lrn_mode) { - case SHARED_VLAN_LEARNING: - setbits_le32(&l2ana_reg->ana.agen_ctrl, VSC9953_FID_MASK_ALL); - break; - case PRIVATE_VLAN_LEARNING: - clrbits_le32(&l2ana_reg->ana.agen_ctrl, VSC9953_FID_MASK_ALL); - break; - default: - printf("Unknown VLAN learn mode\n"); - } -} - -/* Get VLAN learning mode for VSC9953 */ -static int vsc9953_vlan_learning_get(enum vlan_learning_mode *lrn_mode) -{ - u32 val; - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - val = in_le32(&l2ana_reg->ana.agen_ctrl); - - if (!(val & VSC9953_FID_MASK_ALL)) { - *lrn_mode = PRIVATE_VLAN_LEARNING; - } else if ((val & VSC9953_FID_MASK_ALL) == VSC9953_FID_MASK_ALL) { - *lrn_mode = SHARED_VLAN_LEARNING; - } else { - printf("Unknown VLAN learning mode\n"); - return -EINVAL; - } - - return 0; -} - -/* Enable/disable VLAN ingress filtering on a VSC9953 port */ -static void vsc9953_port_ingress_filtering_set(int port_no, int enabled) -{ - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - if (enabled) - setbits_le32(&l2ana_reg->ana.vlan_mask, 1 << port_no); - else - clrbits_le32(&l2ana_reg->ana.vlan_mask, 1 << port_no); -} - -/* Return VLAN ingress filtering on a VSC9953 port */ -static int vsc9953_port_ingress_filtering_get(int port_no) -{ - u32 val; - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - val = in_le32(&l2ana_reg->ana.vlan_mask); - return !!(val & (1 << port_no)); -} - -/* Get the aggregation group of a port */ -static int vsc9953_port_aggr_grp_get(int port_no, int *aggr_grp) -{ - u32 val; - struct vsc9953_analyzer *l2ana_reg; - - if (!VSC9953_PORT_CHECK(port_no)) - return -EINVAL; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - val = in_le32(&l2ana_reg->port[port_no].port_cfg); - *aggr_grp = bitfield_extract_by_mask(val, - VSC9953_PORT_CFG_PORTID_MASK); - - return 0; -} - -static void vsc9953_aggr_grp_members_get(int aggr_grp, - u8 aggr_membr[VSC9953_MAX_PORTS]) -{ - int port_no; - int aggr_membr_grp; - - for (port_no = 0; port_no < VSC9953_MAX_PORTS; port_no++) { - aggr_membr[port_no] = 0; - - if (vsc9953_port_aggr_grp_get(port_no, &aggr_membr_grp)) - continue; - - if (aggr_grp == aggr_membr_grp) - aggr_membr[port_no] = 1; - } -} - -static void vsc9953_update_dest_members_masks(int port_no, u32 membr_bitfld_old, - u32 membr_bitfld_new) -{ - int i; - u32 pgid; - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - /* - * NOTE: Only the unicast destination masks are updated, since - * we do not support for now Layer-2 multicast entries - */ - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - if (i == port_no) { - clrsetbits_le32(&l2ana_reg->port_id_tbl.port_grp_id[i], - VSC9953_PGID_PORT_MASK, - membr_bitfld_new); - continue; - } - - pgid = in_le32(&l2ana_reg->port_id_tbl.port_grp_id[i]); - if ((u32)(1 << i) & membr_bitfld_old & VSC9953_PGID_PORT_MASK) - pgid &= ~((u32)(1 << port_no)); - if ((u32)(1 << i) & membr_bitfld_new & VSC9953_PGID_PORT_MASK) - pgid |= ((u32)(1 << port_no)); - - out_le32(&l2ana_reg->port_id_tbl.port_grp_id[i], pgid); - } -} - -static void vsc9953_update_source_members_masks(int port_no, - u32 membr_bitfld_old, - u32 membr_bitfld_new) -{ - int i; - int index; - u32 pgid; - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - for (i = 0; i < VSC9953_MAX_PORTS + 1; i++) { - index = PGID_SRC_START + i; - pgid = in_le32(&l2ana_reg->port_id_tbl.port_grp_id[index]); - if (i == port_no) { - pgid = (pgid | VSC9953_PGID_PORT_MASK) & - ~membr_bitfld_new; - out_le32(&l2ana_reg->port_id_tbl.port_grp_id[index], - pgid); - continue; - } - - if ((u32)(1 << i) & membr_bitfld_old & VSC9953_PGID_PORT_MASK) - pgid |= (u32)(1 << port_no); - - if ((u32)(1 << i) & membr_bitfld_new & VSC9953_PGID_PORT_MASK) - pgid &= ~(u32)(1 << port_no); - out_le32(&l2ana_reg->port_id_tbl.port_grp_id[index], pgid); - } -} - -static u32 vsc9953_aggr_mask_get_next(u32 aggr_mask, u32 member_bitfield) -{ - if (!member_bitfield) - return 0; - - if (!(aggr_mask & VSC9953_PGID_PORT_MASK)) - aggr_mask = 1; - else - aggr_mask <<= 1; - - while (!(aggr_mask & member_bitfield)) { - aggr_mask <<= 1; - if (!(aggr_mask & VSC9953_PGID_PORT_MASK)) - aggr_mask = 1; - } - - return aggr_mask; -} - -static void vsc9953_update_aggr_members_masks(int port_no, u32 membr_bitfld_old, - u32 membr_bitfld_new) -{ - int i; - u32 pgid; - u32 aggr_mask_old = 0; - u32 aggr_mask_new = 0; - struct vsc9953_analyzer *l2ana_reg; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - /* Update all the PGID aggregation masks */ - for (i = PGID_AGGR_START; i < PGID_SRC_START; i++) { - pgid = in_le32(&l2ana_reg->port_id_tbl.port_grp_id[i]); - - aggr_mask_old = vsc9953_aggr_mask_get_next(aggr_mask_old, - membr_bitfld_old); - pgid = (pgid & ~membr_bitfld_old) | aggr_mask_old; - - aggr_mask_new = vsc9953_aggr_mask_get_next(aggr_mask_new, - membr_bitfld_new); - pgid = (pgid & ~membr_bitfld_new) | aggr_mask_new; - - out_le32(&l2ana_reg->port_id_tbl.port_grp_id[i], pgid); - } -} - -static u32 vsc9953_aggr_membr_bitfield_get(u8 member[VSC9953_MAX_PORTS]) -{ - int i; - u32 member_bitfield = 0; - - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - if (member[i]) - member_bitfield |= 1 << i; - } - member_bitfield &= VSC9953_PGID_PORT_MASK; - - return member_bitfield; -} - -static void vsc9953_update_members_masks(int port_no, - u8 member_old[VSC9953_MAX_PORTS], - u8 member_new[VSC9953_MAX_PORTS]) -{ - u32 membr_bitfld_old = vsc9953_aggr_membr_bitfield_get(member_old); - u32 membr_bitfld_new = vsc9953_aggr_membr_bitfield_get(member_new); - - vsc9953_update_dest_members_masks(port_no, membr_bitfld_old, - membr_bitfld_new); - vsc9953_update_source_members_masks(port_no, membr_bitfld_old, - membr_bitfld_new); - vsc9953_update_aggr_members_masks(port_no, membr_bitfld_old, - membr_bitfld_new); -} - -/* Set the aggregation group of a port */ -static int vsc9953_port_aggr_grp_set(int port_no, int aggr_grp) -{ - u8 aggr_membr_old[VSC9953_MAX_PORTS]; - u8 aggr_membr_new[VSC9953_MAX_PORTS]; - int rc; - int aggr_grp_old; - u32 val; - struct vsc9953_analyzer *l2ana_reg; - - if (!VSC9953_PORT_CHECK(port_no) || !VSC9953_PORT_CHECK(aggr_grp)) - return -EINVAL; - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - rc = vsc9953_port_aggr_grp_get(port_no, &aggr_grp_old); - if (rc) - return rc; - - /* get all the members of the old aggregation group */ - vsc9953_aggr_grp_members_get(aggr_grp_old, aggr_membr_old); - - /* get all the members of the same aggregation group */ - vsc9953_aggr_grp_members_get(aggr_grp, aggr_membr_new); - - /* add current port as member to the new aggregation group */ - aggr_membr_old[port_no] = 0; - aggr_membr_new[port_no] = 1; - - /* update masks */ - vsc9953_update_members_masks(port_no, aggr_membr_old, aggr_membr_new); - - /* Change logical port number */ - val = in_le32(&l2ana_reg->port[port_no].port_cfg); - val = bitfield_replace_by_mask(val, - VSC9953_PORT_CFG_PORTID_MASK, aggr_grp); - out_le32(&l2ana_reg->port[port_no].port_cfg, val); - - return 0; -} - -static int vsc9953_port_status_key_func(struct ethsw_command_def *parsed_cmd) -{ - int i; - u8 enabled; - - /* Last keyword should tell us if we should enable/disable the port */ - if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == - ethsw_id_enable) - enabled = 1; - else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == - ethsw_id_disable) - enabled = 0; - else - return CMD_RET_USAGE; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - vsc9953_port_status_set(parsed_cmd->port, enabled); - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_status_set(i, enabled); - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_port_config_key_func(struct ethsw_command_def *parsed_cmd) -{ - int i; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - vsc9953_phy_autoneg(parsed_cmd->port); - printf("%8s %8s %8s %8s %8s\n", - "Port", "Status", "Link", "Speed", - "Duplex"); - vsc9953_port_config_show(parsed_cmd->port); - - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_phy_autoneg(i); - printf("%8s %8s %8s %8s %8s\n", - "Port", "Status", "Link", "Speed", "Duplex"); - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_config_show(i); - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_port_stats_key_func(struct ethsw_command_def *parsed_cmd) -{ - int i; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - vsc9953_port_statistics_show(parsed_cmd->port); - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_statistics_show(i); - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_port_stats_clear_key_func(struct ethsw_command_def - *parsed_cmd) -{ - int i; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - vsc9953_port_statistics_clear(parsed_cmd->port); - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_statistics_clear(i); - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_learn_show_key_func(struct ethsw_command_def *parsed_cmd) -{ - int i; - enum port_learn_mode mode; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - if (vsc9953_port_learn_mode_get(parsed_cmd->port, &mode)) - return CMD_RET_FAILURE; - printf("%7s %11s\n", "Port", "Learn mode"); - switch (mode) { - case PORT_LEARN_NONE: - printf("%7d %11s\n", parsed_cmd->port, "disable"); - break; - case PORT_LEARN_AUTO: - printf("%7d %11s\n", parsed_cmd->port, "auto"); - break; - default: - printf("%7d %11s\n", parsed_cmd->port, "-"); - } - } else { - printf("%7s %11s\n", "Port", "Learn mode"); - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - if (vsc9953_port_learn_mode_get(i, &mode)) - continue; - switch (mode) { - case PORT_LEARN_NONE: - printf("%7d %11s\n", i, "disable"); - break; - case PORT_LEARN_AUTO: - printf("%7d %11s\n", i, "auto"); - break; - default: - printf("%7d %11s\n", i, "-"); - } - } - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_learn_set_key_func(struct ethsw_command_def *parsed_cmd) -{ - int i; - enum port_learn_mode mode; - - /* Last keyword should tell us the learn mode */ - if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == - ethsw_id_auto) - mode = PORT_LEARN_AUTO; - else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == - ethsw_id_disable) - mode = PORT_LEARN_NONE; - else - return CMD_RET_USAGE; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - vsc9953_port_learn_mode_set(parsed_cmd->port, mode); - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_learn_mode_set(i, mode); - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_fdb_show_key_func(struct ethsw_command_def *parsed_cmd) -{ - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL && - !VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - - if (parsed_cmd->vid != ETHSW_CMD_VLAN_ALL && - !VSC9953_VLAN_CHECK(parsed_cmd->vid)) { - printf("Invalid VID number: %d\n", parsed_cmd->vid); - return CMD_RET_FAILURE; - } - - vsc9953_mac_table_show(parsed_cmd->port, parsed_cmd->vid); - - return CMD_RET_SUCCESS; -} - -static int vsc9953_fdb_flush_key_func(struct ethsw_command_def *parsed_cmd) -{ - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL && - !VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - - if (parsed_cmd->vid != ETHSW_CMD_VLAN_ALL && - !VSC9953_VLAN_CHECK(parsed_cmd->vid)) { - printf("Invalid VID number: %d\n", parsed_cmd->vid); - return CMD_RET_FAILURE; - } - - vsc9953_mac_table_flush(parsed_cmd->port, parsed_cmd->vid); - - return CMD_RET_SUCCESS; -} - -static int vsc9953_fdb_entry_add_key_func(struct ethsw_command_def *parsed_cmd) -{ - int vid; - - /* a port number must be present */ - if (parsed_cmd->port == ETHSW_CMD_PORT_ALL) { - printf("Please specify a port\n"); - return CMD_RET_FAILURE; - } - - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - - /* Use VLAN 1 if VID is not set */ - vid = (parsed_cmd->vid == ETHSW_CMD_VLAN_ALL ? 1 : parsed_cmd->vid); - - if (!VSC9953_VLAN_CHECK(vid)) { - printf("Invalid VID number: %d\n", vid); - return CMD_RET_FAILURE; - } - - if (vsc9953_mac_table_add(parsed_cmd->port, parsed_cmd->ethaddr, vid)) - return CMD_RET_FAILURE; - - return CMD_RET_SUCCESS; -} - -static int vsc9953_fdb_entry_del_key_func(struct ethsw_command_def *parsed_cmd) -{ - int vid; - - /* Use VLAN 1 if VID is not set */ - vid = (parsed_cmd->vid == ETHSW_CMD_VLAN_ALL ? 1 : parsed_cmd->vid); - - if (!VSC9953_VLAN_CHECK(vid)) { - printf("Invalid VID number: %d\n", vid); - return CMD_RET_FAILURE; - } - - if (vsc9953_mac_table_del(parsed_cmd->ethaddr, vid)) - return CMD_RET_FAILURE; - - return CMD_RET_SUCCESS; -} - -static int vsc9953_pvid_show_key_func(struct ethsw_command_def *parsed_cmd) -{ - int i; - int pvid; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - - if (vsc9953_port_vlan_pvid_get(parsed_cmd->port, &pvid)) - return CMD_RET_FAILURE; - printf("%7s %7s\n", "Port", "PVID"); - printf("%7d %7d\n", parsed_cmd->port, pvid); - } else { - printf("%7s %7s\n", "Port", "PVID"); - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - if (vsc9953_port_vlan_pvid_get(i, &pvid)) - continue; - printf("%7d %7d\n", i, pvid); - } - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_pvid_set_key_func(struct ethsw_command_def *parsed_cmd) -{ - /* PVID number should be set in parsed_cmd->vid */ - if (parsed_cmd->vid == ETHSW_CMD_VLAN_ALL) { - printf("Please set a pvid value\n"); - return CMD_RET_FAILURE; - } - - if (!VSC9953_VLAN_CHECK(parsed_cmd->vid)) { - printf("Invalid VID number: %d\n", parsed_cmd->vid); - return CMD_RET_FAILURE; - } - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - vsc9953_port_vlan_pvid_set(parsed_cmd->port, parsed_cmd->vid); - } else { - vsc9953_port_all_vlan_pvid_set(parsed_cmd->vid); - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_vlan_show_key_func(struct ethsw_command_def *parsed_cmd) -{ - int i; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - vsc9953_vlan_membership_show(parsed_cmd->port); - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_vlan_membership_show(i); - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_vlan_set_key_func(struct ethsw_command_def *parsed_cmd) -{ - int i; - int add; - - /* VLAN should be set in parsed_cmd->vid */ - if (parsed_cmd->vid == ETHSW_CMD_VLAN_ALL) { - printf("Please set a vlan value\n"); - return CMD_RET_FAILURE; - } - - if (!VSC9953_VLAN_CHECK(parsed_cmd->vid)) { - printf("Invalid VID number: %d\n", parsed_cmd->vid); - return CMD_RET_FAILURE; - } - - /* keywords add/delete should be the last but one in array */ - if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 2] == - ethsw_id_add) - add = 1; - else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 2] == - ethsw_id_del) - add = 0; - else - return CMD_RET_USAGE; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - vsc9953_vlan_table_membership_set(parsed_cmd->vid, - parsed_cmd->port, add); - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_vlan_table_membership_set(parsed_cmd->vid, i, - add); - } - - return CMD_RET_SUCCESS; -} -static int vsc9953_port_untag_show_key_func( - struct ethsw_command_def *parsed_cmd) -{ - int i; - - printf("%7s\t%17s\n", "Port", "Untag"); - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - vsc9953_port_vlan_egr_untag_show(parsed_cmd->port); - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_vlan_egr_untag_show(i); - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_port_untag_set_key_func(struct ethsw_command_def *parsed_cmd) -{ - int i; - enum egress_untag_mode mode; - - /* keywords for the untagged mode are the last in the array */ - if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == - ethsw_id_all) - mode = EGRESS_UNTAG_ALL; - else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == - ethsw_id_none) - mode = EGRESS_UNTAG_NONE; - else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == - ethsw_id_pvid) - mode = EGRESS_UNTAG_PVID_AND_ZERO; - else - return CMD_RET_USAGE; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - vsc9953_port_vlan_egr_untag_set(parsed_cmd->port, mode); - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_vlan_egr_untag_set(i, mode); - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_egr_vlan_tag_show_key_func( - struct ethsw_command_def *parsed_cmd) -{ - int i; - enum egress_vlan_tag mode; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - vsc9953_port_vlan_egress_tag_get(parsed_cmd->port, &mode); - printf("%7s\t%12s\n", "Port", "Egress VID"); - printf("%7d\t", parsed_cmd->port); - switch (mode) { - case EGR_TAG_CLASS: - printf("%12s\n", "classified"); - break; - case EGR_TAG_PVID: - printf("%12s\n", "pvid"); - break; - default: - printf("%12s\n", "-"); - } - } else { - printf("%7s\t%12s\n", "Port", "Egress VID"); - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - vsc9953_port_vlan_egress_tag_get(i, &mode); - switch (mode) { - case EGR_TAG_CLASS: - printf("%7d\t%12s\n", i, "classified"); - break; - case EGR_TAG_PVID: - printf("%7d\t%12s\n", i, "pvid"); - break; - default: - printf("%7d\t%12s\n", i, "-"); - } - } - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_egr_vlan_tag_set_key_func( - struct ethsw_command_def *parsed_cmd) -{ - int i; - enum egress_vlan_tag mode; - - /* keywords for the egress vlan tag mode are the last in the array */ - if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == - ethsw_id_pvid) - mode = EGR_TAG_PVID; - else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == - ethsw_id_classified) - mode = EGR_TAG_CLASS; - else - return CMD_RET_USAGE; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - vsc9953_port_vlan_egress_tag_set(parsed_cmd->port, mode); - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_vlan_egress_tag_set(i, mode); - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_vlan_learn_show_key_func( - struct ethsw_command_def *parsed_cmd) -{ - int rc; - enum vlan_learning_mode mode; - - rc = vsc9953_vlan_learning_get(&mode); - if (rc) - return CMD_RET_FAILURE; - - switch (mode) { - case SHARED_VLAN_LEARNING: - printf("VLAN learning mode: shared\n"); - break; - case PRIVATE_VLAN_LEARNING: - printf("VLAN learning mode: private\n"); - break; - default: - printf("Unknown VLAN learning mode\n"); - rc = CMD_RET_FAILURE; - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_vlan_learn_set_key_func(struct ethsw_command_def *parsed_cmd) -{ - enum vlan_learning_mode mode; - - /* keywords for shared/private are the last in the array */ - if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == - ethsw_id_shared) - mode = SHARED_VLAN_LEARNING; - else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == - ethsw_id_private) - mode = PRIVATE_VLAN_LEARNING; - else - return CMD_RET_USAGE; - - vsc9953_vlan_learning_set(mode); - - return CMD_RET_SUCCESS; -} - -static int vsc9953_ingr_fltr_show_key_func(struct ethsw_command_def *parsed_cmd) -{ - int i; - int enabled; - - printf("%7s\t%18s\n", "Port", "Ingress filtering"); - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - enabled = vsc9953_port_ingress_filtering_get(parsed_cmd->port); - printf("%7d\t%18s\n", parsed_cmd->port, enabled ? "enable" : - "disable"); - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - enabled = vsc9953_port_ingress_filtering_get(i); - printf("%7d\t%18s\n", parsed_cmd->port, enabled ? - "enable" : - "disable"); - } - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_ingr_fltr_set_key_func(struct ethsw_command_def *parsed_cmd) -{ - int i; - int enable; - - /* keywords for enabling/disabling ingress filtering - * are the last in the array - */ - if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == - ethsw_id_enable) - enable = 1; - else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == - ethsw_id_disable) - enable = 0; - else - return CMD_RET_USAGE; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - vsc9953_port_ingress_filtering_set(parsed_cmd->port, enable); - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) - vsc9953_port_ingress_filtering_set(i, enable); - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_port_aggr_show_key_func(struct ethsw_command_def *parsed_cmd) -{ - int i; - int aggr_grp; - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - - if (vsc9953_port_aggr_grp_get(parsed_cmd->port, &aggr_grp)) - return CMD_RET_FAILURE; - printf("%7s %10s\n", "Port", "Aggr grp"); - printf("%7d %10d\n", parsed_cmd->port, aggr_grp); - } else { - printf("%7s %10s\n", "Port", "Aggr grp"); - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - if (vsc9953_port_aggr_grp_get(i, &aggr_grp)) - continue; - printf("%7d %10d\n", i, aggr_grp); - } - } - - return CMD_RET_SUCCESS; -} - -static int vsc9953_port_aggr_set_key_func(struct ethsw_command_def *parsed_cmd) -{ - int i; - - /* Aggregation group number should be set in parsed_cmd->aggr_grp */ - if (parsed_cmd->aggr_grp == ETHSW_CMD_AGGR_GRP_NONE) { - printf("Please set an aggregation group value\n"); - return CMD_RET_FAILURE; - } - - if (!VSC9953_PORT_CHECK(parsed_cmd->aggr_grp)) { - printf("Invalid aggregation group number: %d\n", - parsed_cmd->aggr_grp); - return CMD_RET_FAILURE; - } - - if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { - if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { - printf("Invalid port number: %d\n", parsed_cmd->port); - return CMD_RET_FAILURE; - } - if (vsc9953_port_aggr_grp_set(parsed_cmd->port, - parsed_cmd->aggr_grp)) { - printf("Port %d: failed to set aggr group %d\n", - parsed_cmd->port, parsed_cmd->aggr_grp); - } - } else { - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - if (vsc9953_port_aggr_grp_set(i, - parsed_cmd->aggr_grp)) { - printf("Port %d: failed to set aggr group %d\n", - i, parsed_cmd->aggr_grp); - } - } - } - - return CMD_RET_SUCCESS; -} - -static struct ethsw_command_func vsc9953_cmd_func = { - .ethsw_name = "L2 Switch VSC9953", - .port_enable = &vsc9953_port_status_key_func, - .port_disable = &vsc9953_port_status_key_func, - .port_show = &vsc9953_port_config_key_func, - .port_stats = &vsc9953_port_stats_key_func, - .port_stats_clear = &vsc9953_port_stats_clear_key_func, - .port_learn = &vsc9953_learn_set_key_func, - .port_learn_show = &vsc9953_learn_show_key_func, - .fdb_show = &vsc9953_fdb_show_key_func, - .fdb_flush = &vsc9953_fdb_flush_key_func, - .fdb_entry_add = &vsc9953_fdb_entry_add_key_func, - .fdb_entry_del = &vsc9953_fdb_entry_del_key_func, - .pvid_show = &vsc9953_pvid_show_key_func, - .pvid_set = &vsc9953_pvid_set_key_func, - .vlan_show = &vsc9953_vlan_show_key_func, - .vlan_set = &vsc9953_vlan_set_key_func, - .port_untag_show = &vsc9953_port_untag_show_key_func, - .port_untag_set = &vsc9953_port_untag_set_key_func, - .port_egr_vlan_show = &vsc9953_egr_vlan_tag_show_key_func, - .port_egr_vlan_set = &vsc9953_egr_vlan_tag_set_key_func, - .vlan_learn_show = &vsc9953_vlan_learn_show_key_func, - .vlan_learn_set = &vsc9953_vlan_learn_set_key_func, - .port_ingr_filt_show = &vsc9953_ingr_fltr_show_key_func, - .port_ingr_filt_set = &vsc9953_ingr_fltr_set_key_func, - .port_aggr_show = &vsc9953_port_aggr_show_key_func, - .port_aggr_set = &vsc9953_port_aggr_set_key_func, -}; - -#endif /* CONFIG_CMD_ETHSW */ - -/***************************************************************************** -At startup, the default configuration would be: - - HW learning enabled on all ports; (HW default) - - All ports are in VLAN 1; - - All ports are VLAN aware; - - All ports have POP_COUNT 1; - - All ports have PVID 1; - - All ports have TPID 0x8100; (HW default) - - All ports tag frames classified to all VLANs that are not PVID; -*****************************************************************************/ -void vsc9953_default_configuration(void) -{ - int i; - - if (vsc9953_autoage_time_set(VSC9953_DEFAULT_AGE_TIME)) - debug("VSC9953: failed to set AGE time to %d\n", - VSC9953_DEFAULT_AGE_TIME); - - for (i = 0; i < VSC9953_MAX_VLAN; i++) - vsc9953_vlan_table_membership_all_set(i, 0); - vsc9953_port_all_vlan_aware_set(1); - vsc9953_port_all_vlan_pvid_set(1); - vsc9953_port_all_vlan_poncnt_set(1); - vsc9953_vlan_table_membership_all_set(1, 1); - vsc9953_vlan_ingr_fltr_learn_drop(1); - vsc9953_port_all_vlan_egress_untagged_set(EGRESS_UNTAG_PVID_AND_ZERO); - if (vsc9953_aggr_code_set(AGGR_CODE_ALL)) - debug("VSC9953: failed to set default aggregation code mode\n"); -} - -static void vcap_entry2cache_init(u32 target, u32 entry_words) -{ - int i; - - for (i = 0; i < entry_words; i++) { - out_le32((unsigned int *)(VSC9953_OFFSET + - VSC9953_VCAP_CACHE_ENTRY_DAT(target, i)), 0x00); - out_le32((unsigned int *)(VSC9953_OFFSET + - VSC9953_VCAP_CACHE_MASK_DAT(target, i)), 0xFF); - } - - out_le32((unsigned int *)(VSC9953_OFFSET + - VSC9953_VCAP_CACHE_TG_DAT(target)), 0x00); - out_le32((unsigned int *)(VSC9953_OFFSET + - VSC9953_VCAP_CFG_MV_CFG(target)), - VSC9953_VCAP_CFG_MV_CFG_SIZE(entry_words)); -} - -static void vcap_action2cache_init(u32 target, u32 action_words, - u32 counter_words) -{ - int i; - - for (i = 0; i < action_words; i++) - out_le32((unsigned int *)(VSC9953_OFFSET + - VSC9953_VCAP_CACHE_ACTION_DAT(target, i)), 0x00); - - for (i = 0; i < counter_words; i++) - out_le32((unsigned int *)(VSC9953_OFFSET + - VSC9953_VCAP_CACHE_CNT_DAT(target, i)), 0x00); -} - -static int vcap_cmd(u32 target, u16 ix, int cmd, int sel, int entry_count) -{ - u32 tgt = target; - u32 value = (VSC9953_VCAP_UPDATE_CTRL_UPDATE_CMD(cmd) | - VSC9953_VCAP_UPDATE_CTRL_UPDATE_ADDR(ix) | - VSC9953_VCAP_UPDATE_CTRL_UPDATE_SHOT); - - if ((sel & TCAM_SEL_ENTRY) && ix >= entry_count) - return CMD_RET_FAILURE; - - if (!(sel & TCAM_SEL_ENTRY)) - value |= VSC9953_VCAP_UPDATE_CTRL_UPDATE_ENTRY_DIS; - - if (!(sel & TCAM_SEL_ACTION)) - value |= VSC9953_VCAP_UPDATE_CTRL_UPDATE_ACTION_DIS; - - if (!(sel & TCAM_SEL_COUNTER)) - value |= VSC9953_VCAP_UPDATE_CTRL_UPDATE_CNT_DIS; - - out_le32((unsigned int *)(VSC9953_OFFSET + - VSC9953_VCAP_CFG_UPDATE_CTRL(tgt)), value); - - do { - value = in_le32((unsigned int *)(VSC9953_OFFSET + - VSC9953_VCAP_CFG_UPDATE_CTRL(tgt))); - - } while (value & VSC9953_VCAP_UPDATE_CTRL_UPDATE_SHOT); - - return CMD_RET_SUCCESS; -} - -static void vsc9953_vcap_init(void) -{ - u32 tgt = VSC9953_ES0; - int cmd_ret; - - /* write entries */ - vcap_entry2cache_init(tgt, ENTRY_WORDS_ES0); - cmd_ret = vcap_cmd(tgt, 0, TCAM_CMD_INITIALIZE, TCAM_SEL_ENTRY, - ENTRY_WORDS_ES0); - if (cmd_ret != CMD_RET_SUCCESS) - debug("VSC9953:%d invalid TCAM_SEL_ENTRY\n", - __LINE__); - - /* write actions and counters */ - vcap_action2cache_init(tgt, BITS_TO_DWORD(ES0_ACT_WIDTH), - BITS_TO_DWORD(ES0_CNT_WIDTH)); - out_le32((unsigned int *)(VSC9953_OFFSET + - VSC9953_VCAP_CFG_MV_CFG(tgt)), - VSC9953_VCAP_CFG_MV_CFG_SIZE(ES0_ACT_COUNT)); - cmd_ret = vcap_cmd(tgt, 0, TCAM_CMD_INITIALIZE, - TCAM_SEL_ACTION | TCAM_SEL_COUNTER, ENTRY_WORDS_ES0); - if (cmd_ret != CMD_RET_SUCCESS) - debug("VSC9953:%d invalid TCAM_SEL_ACTION | TCAM_SEL_COUNTER\n", - __LINE__); - - tgt = VSC9953_IS1; - - /* write entries */ - vcap_entry2cache_init(tgt, ENTRY_WORDS_IS1); - cmd_ret = vcap_cmd(tgt, 0, TCAM_CMD_INITIALIZE, TCAM_SEL_ENTRY, - ENTRY_WORDS_IS1); - if (cmd_ret != CMD_RET_SUCCESS) - debug("VSC9953:%d invalid TCAM_SEL_ENTRY\n", - __LINE__); - - /* write actions and counters */ - vcap_action2cache_init(tgt, BITS_TO_DWORD(IS1_ACT_WIDTH), - BITS_TO_DWORD(IS1_CNT_WIDTH)); - out_le32((unsigned int *)(VSC9953_OFFSET + - VSC9953_VCAP_CFG_MV_CFG(tgt)), - VSC9953_VCAP_CFG_MV_CFG_SIZE(IS1_ACT_COUNT)); - cmd_ret = vcap_cmd(tgt, 0, TCAM_CMD_INITIALIZE, - TCAM_SEL_ACTION | TCAM_SEL_COUNTER, ENTRY_WORDS_IS1); - if (cmd_ret != CMD_RET_SUCCESS) - debug("VSC9953:%d invalid TCAM_SEL_ACTION | TCAM_SEL_COUNTER\n", - __LINE__); - - tgt = VSC9953_IS2; - - /* write entries */ - vcap_entry2cache_init(tgt, ENTRY_WORDS_IS2); - cmd_ret = vcap_cmd(tgt, 0, TCAM_CMD_INITIALIZE, TCAM_SEL_ENTRY, - ENTRY_WORDS_IS2); - if (cmd_ret != CMD_RET_SUCCESS) - debug("VSC9953:%d invalid selection: TCAM_SEL_ENTRY\n", - __LINE__); - - /* write actions and counters */ - vcap_action2cache_init(tgt, BITS_TO_DWORD(IS2_ACT_WIDTH), - BITS_TO_DWORD(IS2_CNT_WIDTH)); - out_le32((unsigned int *)(VSC9953_OFFSET + - VSC9953_VCAP_CFG_MV_CFG(tgt)), - VSC9953_VCAP_CFG_MV_CFG_SIZE(IS2_ACT_COUNT)); - cmd_ret = vcap_cmd(tgt, 0, TCAM_CMD_INITIALIZE, - TCAM_SEL_ACTION | TCAM_SEL_COUNTER, ENTRY_WORDS_IS2); - if (cmd_ret != CMD_RET_SUCCESS) - debug("VSC9953:%d invalid TCAM_SEL_ACTION | TCAM_SEL_COUNTER\n", - __LINE__); -} - -void vsc9953_init(struct bd_info *bis) -{ - u32 i; - u32 hdx_cfg = 0; - u32 phy_addr = 0; - int timeout; - struct vsc9953_system_reg *l2sys_reg; - struct vsc9953_qsys_reg *l2qsys_reg; - struct vsc9953_dev_gmii *l2dev_gmii_reg; - struct vsc9953_analyzer *l2ana_reg; - struct vsc9953_devcpu_gcb *l2dev_gcb; - - l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET + - VSC9953_DEV_GMII_OFFSET); - - l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + - VSC9953_ANA_OFFSET); - - l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET + - VSC9953_SYS_OFFSET); - - l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + - VSC9953_QSYS_OFFSET); - - l2dev_gcb = (struct vsc9953_devcpu_gcb *)(VSC9953_OFFSET + - VSC9953_DEVCPU_GCB); - - out_le32(&l2dev_gcb->chip_regs.soft_rst, - VSC9953_SOFT_SWC_RST_ENA); - timeout = 50000; - while ((in_le32(&l2dev_gcb->chip_regs.soft_rst) & - VSC9953_SOFT_SWC_RST_ENA) && --timeout) - udelay(1); /* busy wait for vsc9953 soft reset */ - if (timeout == 0) - debug("Timeout waiting for VSC9953 to reset\n"); - - out_le32(&l2sys_reg->sys.reset_cfg, VSC9953_MEM_ENABLE | - VSC9953_MEM_INIT); - - timeout = 50000; - while ((in_le32(&l2sys_reg->sys.reset_cfg) & - VSC9953_MEM_INIT) && --timeout) - udelay(1); /* busy wait for vsc9953 memory init */ - if (timeout == 0) - debug("Timeout waiting for VSC9953 memory to initialize\n"); - - out_le32(&l2sys_reg->sys.reset_cfg, (in_le32(&l2sys_reg->sys.reset_cfg) - | VSC9953_CORE_ENABLE)); - - /* VSC9953 Setting to be done once only */ - out_le32(&l2qsys_reg->sys.ext_cpu_cfg, 0x00000b00); - - for (i = 0; i < VSC9953_MAX_PORTS; i++) { - if (vsc9953_port_init(i)) - printf("Failed to initialize l2switch port %d\n", i); - - if (!vsc9953_l2sw.port[i].enabled) - continue; - - /* Enable VSC9953 GMII Ports Port ID 0 - 7 */ - if (VSC9953_INTERNAL_PORT_CHECK(i)) { - out_le32(&l2ana_reg->pfc[i].pfc_cfg, - VSC9953_PFC_FC_QSGMII); - out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], - VSC9953_MAC_FC_CFG_QSGMII); - } else { - out_le32(&l2ana_reg->pfc[i].pfc_cfg, - VSC9953_PFC_FC); - out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], - VSC9953_MAC_FC_CFG); - } - - l2dev_gmii_reg = (struct vsc9953_dev_gmii *) - (VSC9953_OFFSET + VSC9953_DEV_GMII_OFFSET + - T1040_SWITCH_GMII_DEV_OFFSET * i); - - out_le32(&l2dev_gmii_reg->port_mode.clock_cfg, - VSC9953_CLOCK_CFG); - out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg, - VSC9953_MAC_ENA_CFG); - out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_mode_cfg, - VSC9953_MAC_MODE_CFG); - out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ifg_cfg, - VSC9953_MAC_IFG_CFG); - /* mac_hdx_cfg varies with port id*/ - hdx_cfg = VSC9953_MAC_HDX_CFG | (i << 16); - out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_hdx_cfg, hdx_cfg); - out_le32(&l2sys_reg->sys.front_port_mode[i], - VSC9953_FRONT_PORT_MODE); - setbits_le32(&l2qsys_reg->sys.switch_port_mode[i], - VSC9953_PORT_ENA); - out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_maxlen_cfg, - VSC9953_MAC_MAX_LEN); - out_le32(&l2sys_reg->pause_cfg.pause_cfg[i], - VSC9953_PAUSE_CFG); - /* WAIT FOR 2 us*/ - udelay(2); - - /* Initialize Lynx PHY Wrappers */ - phy_addr = 0; - if (vsc9953_l2sw.port[i].enet_if == - PHY_INTERFACE_MODE_QSGMII) - phy_addr = (i + 0x4) & 0x1F; - else if (vsc9953_l2sw.port[i].enet_if == - PHY_INTERFACE_MODE_SGMII) - phy_addr = (i + 1) & 0x1F; - - if (phy_addr) { - /* SGMII IF mode + AN enable */ - vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, - 0x14, PHY_SGMII_IF_MODE_AN | - PHY_SGMII_IF_MODE_SGMII); - /* Dev ability according to SGMII specification */ - vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, - 0x4, PHY_SGMII_DEV_ABILITY_SGMII); - /* Adjust link timer for SGMII - * 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 - */ - vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, - 0x13, 0x0003); - vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, - 0x12, 0x0d40); - /* Restart AN */ - vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, - 0x0, PHY_SGMII_CR_DEF_VAL | - PHY_SGMII_CR_RESET_AN); - - timeout = 50000; - while ((vsc9953_mdio_read(&l2dev_gcb->mii_mng[0], - phy_addr, 0x01) & 0x0020) && --timeout) - udelay(1); /* wait for AN to complete */ - if (timeout == 0) - debug("Timeout waiting for AN to complete\n"); - } - } - - vsc9953_vcap_init(); - vsc9953_default_configuration(); - -#ifdef CONFIG_CMD_ETHSW - if (ethsw_define_functions(&vsc9953_cmd_func) < 0) - debug("Unable to use \"ethsw\" commands\n"); -#endif - - printf("VSC9953 L2 switch initialized\n"); - return; -} From 0c3a6d443f4751b681566e8a752d12e04f4369f4 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:49 -0500 Subject: [PATCH 39/41] usb: Remove CONFIG_USBD_HS This define is not enabled by the only platform which currently enables the legacy option of CONFIG_USB_DEVICE. We can drop this code. Signed-off-by: Tom Rini --- README | 8 ----- drivers/serial/usbtty.c | 50 -------------------------- drivers/serial/usbtty.h | 4 --- drivers/usb/gadget/ep0.c | 19 ---------- include/configs/apalis_imx6.h | 2 -- include/configs/colibri-imx6ull.h | 2 -- include/configs/colibri_imx6.h | 2 -- include/configs/colibri_imx7.h | 2 -- include/configs/ge_b1x5v2.h | 1 - include/configs/gw_ventana.h | 1 - include/configs/imx7-cm.h | 2 -- include/configs/librem5.h | 2 -- include/configs/mx6sabre_common.h | 2 -- include/configs/mx7dsabresd.h | 2 -- include/configs/nitrogen6x.h | 2 -- include/configs/novena.h | 2 -- include/configs/pico-imx6ul.h | 2 -- include/configs/siemens-am33x-common.h | 3 -- include/configs/tbs2910.h | 3 -- include/configs/warp7.h | 2 -- include/usbdescriptors.h | 15 -------- include/usbdevice.h | 19 ---------- 22 files changed, 147 deletions(-) diff --git a/README b/README index c8f6b21e2d9..2944646665a 100644 --- a/README +++ b/README @@ -618,14 +618,6 @@ The following options need to be configured: variable usbtty to be cdc_acm should suffice. The following might be defined in YourBoardName.h - CONFIG_USBD_HS - Define this to enable the high speed support for usb - device and usbtty. If this feature is enabled, a routine - int is_usbd_high_speed(void) - also needs to be defined by the driver to dynamically poll - whether the enumeration has succeded at high speed or full - speed. - If you have a USB-IF assigned VendorID then you may wish to define your own vendor specific values either in BoardName.h or directly in usbd_vendor_info.h. If you don't define diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c index 4f4eb02de08..07a59ec9607 100644 --- a/drivers/serial/usbtty.c +++ b/drivers/serial/usbtty.c @@ -120,20 +120,6 @@ static struct usb_device_descriptor device_descriptor = { .bNumConfigurations = NUM_CONFIGS }; - -#if defined(CONFIG_USBD_HS) -static struct usb_qualifier_descriptor qualifier_descriptor = { - .bLength = sizeof(struct usb_qualifier_descriptor), - .bDescriptorType = USB_DT_QUAL, - .bcdUSB = cpu_to_le16(USB_BCD_VERSION), - .bDeviceClass = COMMUNICATIONS_DEVICE_CLASS, - .bDeviceSubClass = 0x00, - .bDeviceProtocol = 0x00, - .bMaxPacketSize0 = EP0_MAX_PACKET_SIZE, - .bNumConfigurations = NUM_CONFIGS -}; -#endif - /* * Static CDC ACM specific descriptors */ @@ -639,9 +625,6 @@ static void usbtty_init_instances (void) memset (device_instance, 0, sizeof (struct usb_device_instance)); device_instance->device_state = STATE_INIT; device_instance->device_descriptor = &device_descriptor; -#if defined(CONFIG_USBD_HS) - device_instance->qualifier_descriptor = &qualifier_descriptor; -#endif device_instance->event = usbtty_event_handler; device_instance->cdc_recv_setup = usbtty_cdc_setup; device_instance->bus = bus_instance; @@ -755,10 +738,6 @@ static void usbtty_init_terminal_type(short type) device_descriptor.idProduct = cpu_to_le16(CONFIG_USBD_PRODUCTID_CDCACM); -#if defined(CONFIG_USBD_HS) - qualifier_descriptor.bDeviceClass = - COMMUNICATIONS_DEVICE_CLASS; -#endif /* Assign endpoint indices */ tx_endpoint = ACM_TX_ENDPOINT; rx_endpoint = ACM_RX_ENDPOINT; @@ -787,9 +766,6 @@ static void usbtty_init_terminal_type(short type) device_descriptor.bDeviceClass = 0xFF; device_descriptor.idProduct = cpu_to_le16(CONFIG_USBD_PRODUCTID_GSERIAL); -#if defined(CONFIG_USBD_HS) - qualifier_descriptor.bDeviceClass = 0xFF; -#endif /* Assign endpoint indices */ tx_endpoint = GSERIAL_TX_ENDPOINT; rx_endpoint = GSERIAL_RX_ENDPOINT; @@ -937,9 +913,6 @@ static int usbtty_configured (void) static void usbtty_event_handler (struct usb_device_instance *device, usb_device_event_t event, int data) { -#if defined(CONFIG_USBD_HS) - int i; -#endif switch (event) { case DEVICE_RESET: case DEVICE_BUS_INACTIVE: @@ -950,29 +923,6 @@ static void usbtty_event_handler (struct usb_device_instance *device, break; case DEVICE_ADDRESS_ASSIGNED: -#if defined(CONFIG_USBD_HS) - /* - * is_usbd_high_speed routine needs to be defined by - * specific gadget driver - * It returns true if device enumerates at High speed - * Retuns false otherwise - */ - for (i = 0; i < NUM_ENDPOINTS; i++) { - if (((ep_descriptor_ptrs[i]->bmAttributes & - USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK) - && is_usbd_high_speed()) { - - ep_descriptor_ptrs[i]->wMaxPacketSize = - CONFIG_USBD_SERIAL_BULK_HS_PKTSIZE; - } - - endpoint_instance[i + 1].tx_packetSize = - ep_descriptor_ptrs[i]->wMaxPacketSize; - endpoint_instance[i + 1].rcv_packetSize = - ep_descriptor_ptrs[i]->wMaxPacketSize; - } -#endif usbtty_init_endpoints (); default: diff --git a/drivers/serial/usbtty.h b/drivers/serial/usbtty.h index e27aa368c9a..ac4d22044d3 100644 --- a/drivers/serial/usbtty.h +++ b/drivers/serial/usbtty.h @@ -51,10 +51,6 @@ #define CONFIG_USBD_SERIAL_INT_PKTSIZE UDC_INT_PACKET_SIZE #define CONFIG_USBD_SERIAL_BULK_PKTSIZE UDC_BULK_PACKET_SIZE -#if defined(CONFIG_USBD_HS) -#define CONFIG_USBD_SERIAL_BULK_HS_PKTSIZE UDC_BULK_HS_PACKET_SIZE -#endif - #define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS #define USBTTY_BCD_DEVICE 0x00 diff --git a/drivers/usb/gadget/ep0.c b/drivers/usb/gadget/ep0.c index 6624f61b763..c256cc31fbd 100644 --- a/drivers/usb/gadget/ep0.c +++ b/drivers/usb/gadget/ep0.c @@ -371,26 +371,7 @@ static int ep0_get_descriptor (struct usb_device_instance *device, } break; case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER: -#if defined(CONFIG_USBD_HS) - { - struct usb_qualifier_descriptor *qualifier_descriptor = - device->qualifier_descriptor; - - if (!qualifier_descriptor) - return -1; - - /* copy descriptor for this device */ - copy_config(urb, qualifier_descriptor, - sizeof(struct usb_qualifier_descriptor), - max); - - } - dbg_ep0(3, "copied qualifier descriptor, actual_length: 0x%x", - urb->actual_length); -#else return -1; -#endif - break; default: return -1; diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 25a84458f55..07587c7609b 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -28,8 +28,6 @@ /* Host */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 -/* Client */ -#define CONFIG_USBD_HS /* Framebuffer and LCD */ diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index 2f09a264cbe..6f3524deb56 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -126,8 +126,6 @@ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USBD_HS - /* USB Device Firmware Update support */ #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 19daad21cb5..4e51df123a6 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -25,8 +25,6 @@ /* Host */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 -/* Client */ -#define CONFIG_USBD_HS /* Command definition */ diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 48c3f015473..89546b857fe 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -170,6 +170,4 @@ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USBD_HS - #endif diff --git a/include/configs/ge_b1x5v2.h b/include/configs/ge_b1x5v2.h index 1458b187de2..1aaa3e67d60 100644 --- a/include/configs/ge_b1x5v2.h +++ b/include/configs/ge_b1x5v2.h @@ -26,7 +26,6 @@ /* USB */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USBD_HS /* Memory */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 298a8f5aa2a..5a78c68e2fc 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -38,7 +38,6 @@ /* USB Configs */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USBD_HS /* Miscellaneous configurable options */ diff --git a/include/configs/imx7-cm.h b/include/configs/imx7-cm.h index 76771fd66ce..8e9dbefc496 100644 --- a/include/configs/imx7-cm.h +++ b/include/configs/imx7-cm.h @@ -81,6 +81,4 @@ /* USB Configs */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_USBD_HS - #endif /* __CONFIG_H */ diff --git a/include/configs/librem5.h b/include/configs/librem5.h index 11b3fa6c857..377e3e7b3fa 100644 --- a/include/configs/librem5.h +++ b/include/configs/librem5.h @@ -27,8 +27,6 @@ #define CFG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_USBD_HS - #define CONSOLE_ON_UART1 #ifdef CONSOLE_ON_UART1 diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 6294fd1e2c4..96a48a97a30 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -145,6 +145,4 @@ /* Environment organization */ -#define CONFIG_USBD_HS - #endif /* __MX6QSABRE_COMMON_CONFIG_H */ diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index 6c165521f7a..bd70b62bd20 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -101,6 +101,4 @@ /* USB Configs */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_USBD_HS - #endif /* __CONFIG_H */ diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 5020b3bb71d..1d101977c28 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -11,8 +11,6 @@ #include "mx6_common.h" -#define CONFIG_USBD_HS - #define CONFIG_MXC_UART_BASE UART2_BASE /* MMC Configs */ diff --git a/include/configs/novena.h b/include/configs/novena.h index 79e49c74f85..b0d473eeee3 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -55,8 +55,6 @@ #ifdef CONFIG_CMD_USB #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 -/* Gadget part */ -#define CONFIG_USBD_HS #endif /* Extra U-Boot environment. */ diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 8af8883fad6..faf11d5a72a 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -26,8 +26,6 @@ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USBD_HS - #define DFU_DEFAULT_POLL_TIMEOUT 300 #define CONFIG_DFU_ENV_SETTINGS \ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 1b1787a3d3c..406a179842e 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -70,9 +70,6 @@ * we don't need to do it twice. */ -/* USB DRACO ID as default */ -#define CONFIG_USBD_HS - /* USB Device Firmware Update support */ #define DFU_MANIFEST_POLL_TIMEOUT 25000 diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index fcc96749422..689914cb187 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -28,9 +28,6 @@ /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#ifdef CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USBD_HS -#endif /* CONFIG_CMD_USB_MASS_STORAGE */ #endif /* CONFIG_CMD_USB */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 56c90aa1032..a985c6f28f3 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -95,8 +95,6 @@ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_USBD_HS - /* USB Device Firmware Update support */ #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h index 9a503874511..641b4a3e6f2 100644 --- a/include/usbdescriptors.h +++ b/include/usbdescriptors.h @@ -227,21 +227,6 @@ struct usb_device_descriptor { u8 bNumConfigurations; } __attribute__ ((packed)); -#if defined(CONFIG_USBD_HS) -struct usb_qualifier_descriptor { - u8 bLength; - u8 bDescriptorType; - - u16 bcdUSB; - u8 bDeviceClass; - u8 bDeviceSubClass; - u8 bDeviceProtocol; - u8 bMaxPacketSize0; - u8 bNumConfigurations; - u8 breserved; -} __attribute__ ((packed)); -#endif - struct usb_string_descriptor { u8 bLength; u8 bDescriptorType; /* 0x03 */ diff --git a/include/usbdevice.h b/include/usbdevice.h index 611cd6e4abf..80c5af0cbcd 100644 --- a/include/usbdevice.h +++ b/include/usbdevice.h @@ -196,10 +196,6 @@ struct usb_bus_instance; #define USB_DT_INTERFACE 0x04 #define USB_DT_ENDPOINT 0x05 -#if defined(CONFIG_USBD_HS) -#define USB_DT_QUAL 0x06 -#endif - #define USB_DT_HID (USB_TYPE_CLASS | 0x01) #define USB_DT_REPORT (USB_TYPE_CLASS | 0x02) #define USB_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) @@ -279,11 +275,7 @@ struct usb_bus_instance; * USB Spec Release number */ -#if defined(CONFIG_USBD_HS) -#define USB_BCD_VERSION 0x0200 -#else #define USB_BCD_VERSION 0x0110 -#endif /* @@ -552,9 +544,6 @@ struct usb_device_instance { /* generic */ char *name; struct usb_device_descriptor *device_descriptor; /* per device descriptor */ -#if defined(CONFIG_USBD_HS) - struct usb_qualifier_descriptor *qualifier_descriptor; -#endif void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data); @@ -644,14 +633,6 @@ struct usb_string_descriptor *usbd_get_string (u8); struct usb_device_descriptor *usbd_device_device_descriptor(struct usb_device_instance *, int); -#if defined(CONFIG_USBD_HS) -/* - * is_usbd_high_speed routine needs to be defined by specific gadget driver - * It returns true if device enumerates at High speed - * Retuns false otherwise - */ -int is_usbd_high_speed(void); -#endif int usbd_endpoint_halted (struct usb_device_instance *device, int endpoint); void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad); void usbd_tx_complete (struct usb_endpoint_instance *endpoint); From 46df77669ec4d8f04b0faf770d661f79971775a6 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:50 -0500 Subject: [PATCH 40/41] nxp: Rename CONFIG_U_BOOT_HDR_SIZE to FSL_U_BOOT_HDR_SIZE This is always defined to 16K, so we move this over to include/fsl_validate.h to start with. Next, we rename this from CONFIG_ to FSL_. Coalesce the various comments around this definition to be in fsl_validate.h as well to explain the usage. Signed-off-by: Tom Rini --- board/freescale/common/fsl_chain_of_trust.c | 2 +- drivers/mtd/nand/raw/fsl_ifc_spl.c | 6 ++--- include/configs/T104xRDB.h | 8 +----- include/configs/ls1021atsn.h | 15 ------------ include/configs/ls1021atwr.h | 19 --------------- include/configs/ls1043a_common.h | 27 --------------------- include/configs/ls1046a_common.h | 13 ---------- include/configs/ls1088a_common.h | 13 ---------- include/fsl_validate.h | 7 ++++++ 9 files changed, 12 insertions(+), 98 deletions(-) diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c index 9ca350ed468..029d06bbf9d 100644 --- a/board/freescale/common/fsl_chain_of_trust.c +++ b/board/freescale/common/fsl_chain_of_trust.c @@ -143,7 +143,7 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) (image_entry_noargs_t)(unsigned long)spl_image->entry_point; hdr_addr = (spl_image->entry_point + spl_image->size - - CONFIG_U_BOOT_HDR_SIZE); + FSL_U_BOOT_HDR_SIZE); spl_validate_uboot(hdr_addr, (uintptr_t)spl_image->entry_point); /* * In case of failure in validation, spl_validate_uboot would diff --git a/drivers/mtd/nand/raw/fsl_ifc_spl.c b/drivers/mtd/nand/raw/fsl_ifc_spl.c index 3b464ce10ce..60a865b5667 100644 --- a/drivers/mtd/nand/raw/fsl_ifc_spl.c +++ b/drivers/mtd/nand/raw/fsl_ifc_spl.c @@ -278,11 +278,11 @@ void nand_boot(void) * U-Boot header is appended at end of U-boot image, so * calculate U-boot header address using U-boot header size. */ -#define CONFIG_U_BOOT_HDR_ADDR \ +#define FSL_U_BOOT_HDR_ADDR \ ((CFG_SYS_NAND_U_BOOT_START + \ CFG_SYS_NAND_U_BOOT_SIZE) - \ - CONFIG_U_BOOT_HDR_SIZE) - spl_validate_uboot(CONFIG_U_BOOT_HDR_ADDR, + FSL_U_BOOT_HDR_SIZE) + spl_validate_uboot(FSL_U_BOOT_HDR_ADDR, CFG_SYS_NAND_U_BOOT_START); /* * In case of failure in validation, spl_validate_uboot would diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 5bdc2105f56..7a5bf937e4c 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -20,13 +20,7 @@ #ifdef CONFIG_MTD_RAW_NAND #ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. - */ -#define CFG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + \ - CONFIG_U_BOOT_HDR_SIZE) +#define CFG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + (16 << 10)) #else #define CFG_SYS_NAND_U_BOOT_SIZE (768 << 10) #endif diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index 5612c60ae90..b15c4a238bc 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -38,21 +38,6 @@ #define SDRAM_CFG2_FRC_SR 0x80000000 #define SDRAM_CFG_BI 0x00000001 -#ifdef CONFIG_SD_BOOT -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -#endif /* ifdef CONFIG_NXP_ESBC */ - -#ifdef CONFIG_U_BOOT_HDR_SIZE -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw U-Boot image instead of FIT image. - */ -#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ -#endif - #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 281b26fa2ba..9b22a2db21a 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -37,25 +37,6 @@ #define SDRAM_CFG2_FRC_SR 0x80000000 #define SDRAM_CFG_BI 0x00000001 -#ifdef CONFIG_SD_BOOT -#ifdef CONFIG_NXP_ESBC -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. - */ -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -#endif /* ifdef CONFIG_NXP_ESBC */ - -#ifdef CONFIG_U_BOOT_HDR_SIZE -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ -#endif - #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index d0380b33732..685e7e65d15 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -41,37 +41,10 @@ /* Serial Port */ #define CFG_SYS_NS16550_CLK (get_serial_clock()) -/* SD boot SPL */ -#ifdef CONFIG_SD_BOOT -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_NXP_ESBC */ -#endif - /* NAND SPL */ #ifdef CONFIG_NAND_BOOT #define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE #define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE - -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -#endif /* ifdef CONFIG_NXP_ESBC */ - -#ifdef CONFIG_U_BOOT_HDR_SIZE -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ - #endif /* GPIO */ diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 250891e9e30..ae9dc0c73b0 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -41,19 +41,6 @@ /* Serial Port */ #define CFG_SYS_NS16550_CLK (get_serial_clock()) -/* SD boot SPL */ -#ifdef CONFIG_SD_BOOT -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_NXP_ESBC */ -#endif - /* NAND SPL */ #ifdef CONFIG_NAND_BOOT #define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index bcba8d81c04..86c5d48c0de 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -133,17 +133,4 @@ unsigned long long get_qixis_addr(void); " 0x580e00000 \0" #endif -#ifdef CONFIG_SPL -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_NXP_ESBC */ - -#endif - #endif /* __LS1088_COMMON_H */ diff --git a/include/fsl_validate.h b/include/fsl_validate.h index 252d499e7b1..fbcbd424967 100644 --- a/include/fsl_validate.h +++ b/include/fsl_validate.h @@ -280,4 +280,11 @@ int fsl_setenv_chain_of_trust(void); * Architecture header (appended to U-boot image). */ void spl_validate_uboot(uint32_t hdr_addr, uintptr_t img_addr); + +/* + * This header is appended at end of image and copied to DDR along + * with the U-Boot image and later used as part of the validation + * flow + */ +#define FSL_U_BOOT_HDR_SIZE (16 << 10) #endif From 8214b772cf213f1f02e5e33f4a5158f52d9d2c23 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 2 Dec 2022 16:42:51 -0500 Subject: [PATCH 41/41] T104xRDB: Remove non-TARGET_T1042D4RDB variants At this point only the TARGET_T1042D4RDB variant of this is supported in tree, so remove the remaining parts of the other platforms. Signed-off-by: Tom Rini --- arch/powerpc/cpu/mpc85xx/Kconfig | 17 ------- arch/powerpc/include/asm/fsl_secure_boot.h | 2 - board/freescale/t104xrdb/Kconfig | 4 +- board/freescale/t104xrdb/cpld.h | 2 +- board/freescale/t104xrdb/eth.c | 19 -------- board/freescale/t104xrdb/t104xrdb.c | 19 +------- include/configs/T104xRDB.h | 52 ++-------------------- 7 files changed, 7 insertions(+), 108 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 03373bf8692..3275d4fa9b8 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -200,14 +200,6 @@ config TARGET_T1024RDB imply CMD_EEPROM imply PANIC_HANG -config TARGET_T1042RDB - bool "Support T1042RDB" - select ARCH_T1042 - select BOARD_LATE_INIT if CHAIN_OF_TRUST - select SUPPORT_SPL - select PHYS_64BIT - select SYS_L3_SIZE_256KB - config TARGET_T1042D4RDB bool "Support T1042D4RDB" select ARCH_T1042 @@ -217,15 +209,6 @@ config TARGET_T1042D4RDB select SYS_L3_SIZE_256KB imply PANIC_HANG -config TARGET_T1042RDB_PI - bool "Support T1042RDB_PI" - select ARCH_T1042 - select BOARD_LATE_INIT if CHAIN_OF_TRUST - select SUPPORT_SPL - select PHYS_64BIT - select SYS_L3_SIZE_256KB - imply PANIC_HANG - config TARGET_T2080QDS bool "Support T2080QDS" select ARCH_T2080 diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index 09f37ec3e49..236098e718e 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -17,9 +17,7 @@ #if defined(CONFIG_TARGET_T2080QDS) || \ defined(CONFIG_TARGET_T2080RDB) || \ - defined(CONFIG_TARGET_T1042RDB) || \ defined(CONFIG_TARGET_T1042D4RDB) || \ - defined(CONFIG_TARGET_T1042RDB_PI) || \ defined(CONFIG_ARCH_T1024) #undef CFG_SYS_INIT_L3_ADDR #define CFG_SYS_INIT_L3_ADDR 0xbff00000 diff --git a/board/freescale/t104xrdb/Kconfig b/board/freescale/t104xrdb/Kconfig index e33d3173650..e4814915e33 100644 --- a/board/freescale/t104xrdb/Kconfig +++ b/board/freescale/t104xrdb/Kconfig @@ -1,6 +1,4 @@ -if TARGET_T1040RDB || TARGET_T1040D4RDB || \ - TARGET_T1042RDB || TARGET_T1042D4RDB || \ - TARGET_T1042RDB_PI +if TARGET_T1042D4RDB config SYS_BOARD default "t104xrdb" diff --git a/board/freescale/t104xrdb/cpld.h b/board/freescale/t104xrdb/cpld.h index 769883f9461..0384202fbcb 100644 --- a/board/freescale/t104xrdb/cpld.h +++ b/board/freescale/t104xrdb/cpld.h @@ -20,7 +20,7 @@ struct cpld_data { u8 int_status; /* 0x12 - Interrupt status Register */ u8 flash_ctl_status; /* 0x13 - Flash control and status register */ u8 fan_ctl_status; /* 0x14 - Fan control and status register */ -#if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB) +#if defined(CONFIG_TARGET_T1042D4RDB) u8 int_mask; /* 0x15 - Interrupt mask Register */ #else u8 led_ctl_status; /* 0x15 - LED control and status register */ diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c index c011aa96fbe..3906c8381e0 100644 --- a/board/freescale/t104xrdb/eth.c +++ b/board/freescale/t104xrdb/eth.c @@ -39,25 +39,6 @@ int board_eth_init(struct bd_info *bis) int idx = i - FM1_DTSEC1; switch (fm_info_get_enet_if(i)) { -#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB) - case PHY_INTERFACE_MODE_SGMII: - /* T1040RDB & T1040D4RDB only supports SGMII on - * DTSEC3 - */ - fm_info_set_phy_address(FM1_DTSEC3, - CFG_SYS_SGMII1_PHY_ADDR); - break; -#endif -#ifdef CONFIG_TARGET_T1042RDB - case PHY_INTERFACE_MODE_SGMII: - /* T1042RDB doesn't supports SGMII on DTSEC1 & DTSEC2 */ - if ((FM1_DTSEC1 == i) || (FM1_DTSEC2 == i)) - fm_info_set_phy_address(i, 0); - /* T1042RDB only supports SGMII on DTSEC3 */ - fm_info_set_phy_address(FM1_DTSEC3, - CFG_SYS_SGMII1_PHY_ADDR); - break; -#endif #ifdef CONFIG_TARGET_T1042D4RDB case PHY_INTERFACE_MODE_SGMII: /* T1042D4RDB supports SGMII on DTSEC1, DTSEC2 diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c index 45ebdd30004..8cec71217a7 100644 --- a/board/freescale/t104xrdb/t104xrdb.c +++ b/board/freescale/t104xrdb/t104xrdb.c @@ -34,7 +34,7 @@ int checkboard(void) struct cpu_type *cpu = gd->arch.cpu; u8 sw; -#if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB) +#if defined(CONFIG_TARGET_T1042D4RDB) printf("Board: %sD4RDB\n", cpu->name); #else printf("Board: %sRDB\n", cpu->name); @@ -110,23 +110,6 @@ int misc_init_r(void) CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) | MISC_CTL_SG_SEL | MISC_CTL_AURORA_SEL); -#if defined(CONFIG_TARGET_T1040D4RDB) - if (hwconfig("qe-tdm")) { - CPLD_WRITE(sfp_ctl_status, CPLD_READ(sfp_ctl_status) | - MISC_MUX_QE_TDM); - printf("QECSR : 0x%02x, mux to qe-tdm\n", - CPLD_READ(sfp_ctl_status)); - } - /* Mask all CPLD interrupt sources, except QSGMII interrupts */ - if (CPLD_READ(sw_ver) < 0x03) { - debug("CPLD SW version 0x%02x doesn't support int_mask\n", - CPLD_READ(sw_ver)); - } else { - CPLD_WRITE(int_mask, CPLD_INT_MASK_ALL & - ~(CPLD_INT_MASK_QSGMII1 | CPLD_INT_MASK_QSGMII2)); - } -#endif - return 0; } diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 7a5bf937e4c..cfde8ecf9c6 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -127,24 +127,10 @@ #define CPLD_LBMAP_RESET 0xFF #define CPLD_LBMAP_SHIFT 0x03 -#if defined(CONFIG_TARGET_T1042RDB_PI) -#define CPLD_DIU_SEL_DFP 0x80 -#elif defined(CONFIG_TARGET_T1042D4RDB) +#if defined(CONFIG_TARGET_T1042D4RDB) #define CPLD_DIU_SEL_DFP 0xc0 #endif -#if defined(CONFIG_TARGET_T1040D4RDB) -#define CPLD_INT_MASK_ALL 0xFF -#define CPLD_INT_MASK_THERM 0x80 -#define CPLD_INT_MASK_DVI_DFP 0x40 -#define CPLD_INT_MASK_QSGMII1 0x20 -#define CPLD_INT_MASK_QSGMII2 0x10 -#define CPLD_INT_MASK_SGMI1 0x08 -#define CPLD_INT_MASK_SGMI2 0x04 -#define CPLD_INT_MASK_TDMR1 0x02 -#define CPLD_INT_MASK_TDMR2 0x01 -#endif - #define CFG_SYS_CPLD_BASE 0xffdf0000 #define CFG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CFG_SYS_CPLD_BASE) #define CFG_SYS_CSPR2_EXT (0xf) @@ -266,9 +252,7 @@ #define I2C_MUX_PCA_ADDR 0x70 #define I2C_MUX_CH_DEFAULT 0x8 -#if defined(CONFIG_TARGET_T1042RDB_PI) || \ - defined(CONFIG_TARGET_T1040D4RDB) || \ - defined(CONFIG_TARGET_T1042D4RDB) +#if defined(CONFIG_TARGET_T1042D4RDB) /* * RTC configuration */ @@ -350,36 +334,16 @@ #endif /* CONFIG_NOBQFMAN */ #ifdef CONFIG_FMAN_ENET -#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB) -#define CFG_SYS_SGMII1_PHY_ADDR 0x03 -#elif defined(CONFIG_TARGET_T1040D4RDB) -#define CFG_SYS_SGMII1_PHY_ADDR 0x01 -#elif defined(CONFIG_TARGET_T1042D4RDB) +#if defined(CONFIG_TARGET_T1042D4RDB) #define CFG_SYS_SGMII1_PHY_ADDR 0x02 #define CFG_SYS_SGMII2_PHY_ADDR 0x03 #define CFG_SYS_SGMII3_PHY_ADDR 0x01 #endif -#if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB) -#define CFG_SYS_RGMII1_PHY_ADDR 0x04 -#define CFG_SYS_RGMII2_PHY_ADDR 0x05 -#else #define CFG_SYS_RGMII1_PHY_ADDR 0x01 #define CFG_SYS_RGMII2_PHY_ADDR 0x02 #endif -/* Enable VSC9953 L2 Switch driver on T1040 SoC */ -#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB) -#ifdef CONFIG_TARGET_T1040RDB -#define CFG_SYS_FM1_QSGMII11_PHY_ADDR 0x04 -#define CFG_SYS_FM1_QSGMII21_PHY_ADDR 0x08 -#else -#define CFG_SYS_FM1_QSGMII11_PHY_ADDR 0x08 -#define CFG_SYS_FM1_QSGMII21_PHY_ADDR 0x0c -#endif -#endif -#endif - /* * Miscellaneous configurable options */ @@ -402,15 +366,7 @@ #define __USB_PHY_TYPE utmi #define RAMDISKFILE "t104xrdb/ramdisk.uboot" -#ifdef CONFIG_TARGET_T1040RDB -#define FDTFILE "t1040rdb/t1040rdb.dtb" -#elif defined(CONFIG_TARGET_T1042RDB_PI) -#define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb" -#elif defined(CONFIG_TARGET_T1042RDB) -#define FDTFILE "t1042rdb/t1042rdb.dtb" -#elif defined(CONFIG_TARGET_T1040D4RDB) -#define FDTFILE "t1042rdb/t1040d4rdb.dtb" -#elif defined(CONFIG_TARGET_T1042D4RDB) +#if defined(CONFIG_TARGET_T1042D4RDB) #define FDTFILE "t1042rdb/t1042d4rdb.dtb" #endif