CNI was removed from build-container which works fine for
`talosctl cluster create` clusters as it installs its own CNI, but fails
for upgrade tests as they were never updated for the CNI bundle.
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
This adds a VIP (virtual IP) option to the network configuration of an
interface, which will allow a set of nodes to share a floating IP
address among them. For now, this is restricted to control plane use
and only a single shared IP is supported.
Fixes#3111
Signed-off-by: Seán C McCord <ulexus@gmail.com>
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
This adds new `IMAGE_REGISTRY` variable (similar to `IMAGE_TAG`) which
affects only the registry image gets pushed to, but it's not built into
the binaries and images as a default registry.
This fixes a problem when release builds reference our CI local
registry.
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
State partition encryption support adds a new section to the machine config.
And a new step to the sequencer flow which saves encryption
configuration object as json serialized value in the META partition.
Everything else is the same as is for the ephemeral partition.
Additionally enabled state partition encryption in the disk encryption
integration tests.
Signed-off-by: Artem Chernyshev <artem.0xD2@gmail.com>
This PR introduces the first part of disk encryption support.
New config section `systemDiskEncryption` was added into MachineConfig.
For now it contains only Ephemeral partition encryption.
Encryption itself supports two kinds of keys for now:
- node id deterministic key.
- static key which is hardcoded in the config and mainly used for test
purposes.
Talosctl cluster create can now be told to encrypt ephemeral partition
by using `--encrypt-ephemeral` flag.
Additionally:
- updated pkgs library version.
- changed Dockefile to copy cryptsetup deps from pkgs.
Signed-off-by: Artem Chernyshev <artem.0xD2@gmail.com>
This PR moves to using the official CAPG provider release, as well as
making use of our snazzy new capi templates.
Signed-off-by: Spencer Smith <robertspencersmith@gmail.com>
Default manifests created by bootkube so far were only enabling
pod-checkpointer for kube-apiserver. This seems to have issues with
single-node control plane scenario, when without scheduler and
controller-manager node might fall into `NodeAffinity` state.
See https://github.com/talos-systems/bootkube-plugin/pull/23
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
Fixes: https://github.com/talos-systems/talos/issues/2973
Can now supply disk image using `--disk-image-path` flag.
May need to enable `--with-apply-config` if it's necessary to bootstrap
nodes properly.
Signed-off-by: Artem Chernyshev <artem.0xD2@gmail.com>
Adds a simple test for the ISO. Boots the ISO, and then uses the `apply-config` command
in `talosctl` to create a cluster.
Signed-off-by: Andrew Rynhard <andrew@rynhard.io>
Talos 0.8 is going to ship with K8s 1.20.x.
Changes to support new `control-plane` label,
upgrade-k8s supports automated fixups for 1.20.
See also: https://github.com/talos-systems/bootkube-plugin/pull/22
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
This changes installer image/iso output to be tar via stdout
(optionally), so that we can copy back artifacts back from remote docker
daemon.
Fixes#2776
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
This builds a bundle with CNI plugins for talosctl which is
automatically downloaded by `talosctl` if CNI plugins are missing.
CNI directories are moved by default to the `~/.talos/cni` path.
Also add a bunch of pre-flight checks to the QEMU provisioner to make it
easier to bootstrap the Talos QEMU cluster.
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
User-disks are supported by QEMU and Firecracker providers.
Can be defined by using the following parameters:
```
--user-disk /mount/path:1GB
```
Can get more than 1 user disk.
Same set of user disks will be created for all master and worker nodes.
Additionally enable user-disks in qemu e2e test.
Signed-off-by: Artem Chernyshev <artem.0xD2@gmail.com>
This PR pulls in the latest version of our CAPI providers, as well as
makes some minor tweaks to our bash scripts to disable terminal output
of commands during certain actions.
Signed-off-by: Spencer Smith <robertspencersmith@gmail.com>
By default, build outside of Drone works the same and builds only amd64
version, loads images back into dockerd, etc.
If multiple platforms are used, multi-arch images are built which can't
be exported to docker or to `.tar` image, they're always pushed to the
registry (even for PR builds to our internal CI registry).
Artifacts as files (initramfs, kernel) now have `-arch` suffix:
`vmlinuz-amd64`, `initramfs-amd64.xz`. "Magic" script normalizes output
paths depending on whether single platform or multiple platforms were
given.
VM provisioners accept magic `${ARCH}` in initramfs/kernel paths which
gets replaced by cluster architecture.
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
Add sonobuoy runner code with log fetching on failure. Use hand-picked
set of e2e tests to run: verify basic pod functionality, verify service
connectivity.
Add option `--run-e2e` to the `talosctl health` to run quick e2e test to
verify cluster health.
Add option to run provision tests with custom CNI, run one track of
provision tests with Cilium.
Bump Cilium to 1.8.2.
Talos 0.6 won't uncordon node automatically after upgrade from 0.5, as
0.5 doesn't put annotation. Workaround that in upgrade tests.
Bump upgrade test version to 0.6.0 release.
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
This moves to using grub instead of syslinux.
BREAKING CHANGE: Single node upgrades will fail in this change. This
will also break the A/B fallback setup since this version introduces
an entirely new partition scheme, that any fallback will not know about.
We plan on addressing these issues in a follow up change.
Signed-off-by: Andrew Rynhard <andrew@rynhard.io>
This PR will update the CI testing to make use of our control plane
provider, as well as the other CAPI components.
Signed-off-by: Spencer Smith <robertspencersmith@gmail.com>
As the build runs inside containers which are part of a single pod, we
need to clean up networking bits (bridge interface, etc.), so that it
doesn't cause problems for other steps.
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
Fixes#2363#2364#2370#2371
Several changes packed together:
* use compressed `vmlinuz` everywhere, firecracker provisioner
uncompresses it before first use, drop `vmlinux`
* handle reboots in qemu launcher to support reset API case, update
empty disk check to handle reset behavior (erasing partition table)
* make bootloader support default in provisioners, and flag to disable
that
* early support for target architecture for qemu provisioner
This should allow us to use `qemu` in CI/CD (not included into this PR):
integration test passes with qemu.
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
Starts and stops qemu VMs, has some initial configuration subset.
Sets up networking through CNI tools, sets up DHCP server which gives IP
addresses to nodes.
Signed-off-by: Artem Chernyshev <artem.0xD2@gmail.com>
Fixes#2330
CLI tests require node discovery as `--nodes` flag is enforced for most
of the `talosctl commands`.
For clusters created via `talosctl cluster create`, cluster provisioner
state provides all the necessary information, but clusters created via
CAPI don't have the state attached.
API tests rely on Talos and Kubernetes APIs to fetch kubeconfig and
access Nodes K8s API.
CLI tests should rely only on CLI tools, so we use `kubectl get nodes` +
`talosctl kubeconfig` to fetch list of master and worker nodes.
This discovery method relies on "bootstrap" node being set in
`talosconfig` (to fetch `kubeconfig`).
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
We're not using load balancer for `apid` (always using client-side load
balancing), so we can remove this safely.
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
With load-balancing enabled by default running `talosctl` without
`--nodes` is risky, as it might hit any control plane by default without
`--nodes`.
Only two commands do not enforce this check, as they do their own node
contexts: `crashdump` and `health` (client-side).
Integration tests were updated to always supply `--nodes` cli argument,
while doing that I refactored the storage for discovered nodes to use
existing `cluster.Info` interface.
The downside is that with e2e CAPI tests CLI tests will be mostly
skipped as we don't support discovery in CLI tests at the momemnt. This
can be fixed by using `talosctl kubeconfig` + `kubectl get nodes` for
node discovery.
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
This PR brings in the latest version of clusterctl that has built-in
support for the talos repos. I'll be chasing this with a move to using
the control-plane provider as well!
Signed-off-by: Spencer Smith <robertspencersmith@gmail.com>
When cluster fails to be bootstrapped or it fails the health check, it's
hard to find the root cause without the logs.
This change adds optional crashdump (it dumps firecracker logs or docker
logs) after provisioning failure. It's not enabled by default.
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
This PR fixes the fix where we try to cleanup sonobuoy. We did that
successfully, but still got errors b/c we were immediately trying to
create service accounts in a namespace that was being deleted. This
should fix that. The sonobuoy default wait period is 1hr, should be
plenty.
Signed-off-by: Spencer Smith <robertspencersmith@gmail.com>
This PR will make sure that, if we're going to retry sonobuoy, we run
the delete command first to clean up any dangling resources.
Closes#2266.
Signed-off-by: Spencer Smith <robertspencersmith@gmail.com>
This adds new flug to `cluster create` to launch cluster with custom
CNI, `integration` pipeline gets a new step to run short test with
Cilium 1.8.0 CNI.
Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>
