As discussed in #13684, base the ProxyGroup's proxy definitions on the same
scaffolding as the existing proxies, as defined in proxy.yaml
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Currently egress Services for ProxyGroup only work for Pods and Services
with IPv4 addresses. Ensure that it works on dual stack clusters by reading
proxy Pod's IP from the .status.podIPs list that always contains both
IPv4 and IPv6 address (if the Pod has them) rather than .status.podIP that
could contain IPv6 only for a dual stack cluster.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The default ProxyClass can be set via helm chart or env var, and applies
to all proxies that do not otherwise have an explicit ProxyClass set.
This ensures proxies created by the new ProxyGroup CRD are consistent
with the behaviour of existing proxies
Nearby but unrelated changes:
* Fix up double error logs (controller runtime logs returned errors)
* Fix a couple of variable names
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Implements the controller for the new ProxyGroup CRD, designed for
running proxies in a high availability configuration. Each proxy gets
its own config and state Secret, and its own tailscale node ID.
We are currently mounting all of the config secrets into the container,
but will stop mounting them and instead read them directly from the kube
API once #13578 is implemented.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new reconciler that reconciles ExternalName Services that define a
tailnet target that should be exposed to cluster workloads on a ProxyGroup's
proxies.
The reconciler ensures that for each such service, the config mounted to
the proxies is updated with the tailnet target definition and that
and EndpointSlice and ClusterIP Service are created for the service.
Adds a new reconciler that ensures that as proxy Pods become ready to route
traffic to a tailnet target, the EndpointSlice for the target is updated
with the Pods' endpoints.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The operator creates a non-reusable auth key for each of
the cluster proxies that it creates and puts in the tailscaled
configfile mounted to the proxies.
The proxies are always tagged, and their state is persisted
in a Kubernetes Secret, so their node keys are expected to never
be regenerated, so that they don't need to re-auth.
Some tailnet configurations however have seen issues where the auth
keys being left in the tailscaled configfile cause the proxies
to end up in unauthorized state after a restart at a later point
in time.
Currently, we have not found a way to reproduce this issue,
however this commit removes the auth key from the config once
the proxy can be assumed to have logged in.
If an existing, logged-in proxy is upgraded to this version,
its redundant auth key will be removed from the conffile.
If an existing, logged-in proxy is downgraded from this version
to a previous version, it will work as before without re-issuing key
as the previous code did not enforce that a key must be present.
Updates tailscale/tailscale#13451
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The ProxyGroup CRD specifies a set of N pods which will each be a
tailnet device, and will have M different ingress or egress services
mapped onto them. It is the mechanism for specifying how highly
available proxies need to be. This commit only adds the definition, no
controller loop, and so it is not currently functional.
This commit also splits out TailnetDevice and RecorderTailnetDevice
into separate structs because the URL field is specific to recorders,
but we want a more generic struct for use in the ProxyGroup status field.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator,k8s-operator,kube: Add TSRecorder CRD + controller
Deploys tsrecorder images to the operator's cluster. S3 storage is
configured via environment variables from a k8s Secret. Currently
only supports a single tsrecorder replica, but I've tried to take early
steps towards supporting multiple replicas by e.g. having a separate
secret for auth and state storage.
Example CR:
```yaml
apiVersion: tailscale.com/v1alpha1
kind: Recorder
metadata:
name: rec
spec:
enableUI: true
```
Updates #13298
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Rename kube/{types,client,api} -> kube/{kubetypes,kubeclient,kubeapi}
so that we don't need to rename the package on each import to
convey that it's kubernetes specific.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Further split kube package into kube/{client,api,types}. This is so that
consumers who only need constants/static types don't have to import
the client and api bits.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator/sessonrecording: ensure CastHeader contains terminal size
For tsrecorder to be able to play session recordings, the recording's
CastHeader must have '.Width' and '.Height' fields set to non-zero.
Kubectl (or whoever is the client that initiates the 'kubectl exec'
session recording) sends the terminal dimensions in a resize message that
the API server proxy can intercept, however that races with the first server
message that we need to record.
This PR ensures we wait for the terminal dimensions to be processed from
the first resize message before any other data is sent, so that for all
sessions with terminal attached, the header of the session recording
contains the terminal dimensions and the recording can be played by tsrecorder.
Updates tailscale/tailscale#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Previously, despite what the commit said, we were using a raw IP socket
that was *not* an AF_PACKET socket, and thus was subject to the host
firewall rules. Switch to using a real AF_PACKET socket to actually get
the functionality we want.
Updates #13140
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If657daeeda9ab8d967e75a4f049c66e2bca54b78
Currently, we use PermitRead/PermitWrite/PermitCert permission flags to determine which operations are allowed for a LocalAPI client.
These checks are performed when localapi.Handler handles a request. Additionally, certain operations (e.g., changing the serve config)
requires the connected user to be a local admin. This approach is inherently racey and is subject to TOCTOU issues.
We consider it to be more critical on Windows environments, which are inherently multi-user, and therefore we prevent more than one
OS user from connecting and utilizing the LocalBackend at the same time. However, the same type of issues is also applicable to other
platforms when switching between profiles that have different OperatorUser values in ipn.Prefs.
We'd like to allow more than one Windows user to connect, but limit what they can see and do based on their access rights on the device
(e.g., an local admin or not) and to the currently active LoginProfile (e.g., owner/operator or not), while preventing TOCTOU issues on Windows
and other platforms. Therefore, we'd like to pass an actor from the LocalAPI to the LocalBackend to represent the user performing the operation.
The LocalBackend, or the profileManager down the line, will then check the actor's access rights to perform a given operation on the device
and against the current (and/or the target) profile.
This PR does not change the current permission model in any way, but it introduces the concept of an actor and includes some preparatory
work to pass it around. Temporarily, the ipnauth.Actor interface has methods like IsLocalSystem and IsLocalAdmin, which are only relevant
to the current permission model. It also lacks methods that will actually be used in the new model. We'll be adding these gradually in the next
PRs and removing the deprecated methods and the Permit* flags at the end of the transition.
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This commit adds a new usermetric package and wires
up metrics across the tailscale client.
Updates tailscale/corp#22075
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
After the upstream PR is merged, we can point directly at github.com/vishvananda/netlink
and retire github.com/tailscale/netlink.
See https://github.com/vishvananda/netlink/pull/1006
Updates #12298
Signed-off-by: Percy Wegmann <percy@tailscale.com>
In prep for updating to new staticcheck required for Go 1.23.
Updates #12912
Change-Id: If77892a023b79c6fa798f936fc80428fd4ce0673
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In 2f27319baf we disabled GRO due to a
data race around concurrent calls to tstun.Wrapper.Write(). This commit
refactors GRO to be thread-safe, and re-enables it on Linux.
This refactor now carries a GRO type across tstun and netstack APIs
with a lifetime that is scoped to a single tstun.Wrapper.Write() call.
In 25f0a3fc8f we used build tags to
prevent importation of gVisor's GRO package on iOS as at the time we
believed it was contributing to additional memory usage on that
platform. It wasn't, so this commit simplifies and removes those
build tags.
Updates tailscale/corp#22353
Updates tailscale/corp#22125
Updates #6816
Signed-off-by: Jordan Whited <jordan@tailscale.com>
cmd/k8s-operator/deploy: replace wildcards in Kubernetes Operator RBAC role definitions with verbs
fixes: #13168
Signed-off-by: Pierig Le Saux <pierig@n3xt.io>
Coder has just adopted nhooyr/websocket which unfortunately changes the import path.
`github.com/coder/coder` imports `tailscale.com/net/wsconn` which was still pointing
to `nhooyr.io/websocket`, but this change updates it.
See https://coder.com/blog/websocket
Updates #13154
Change-Id: I3dec6512472b14eae337ae22c5bcc1e3758888d5
Signed-off-by: Kyle Carberry <kyle@carberry.com>
cmd/k8s-operator,k8s-operator/sessionrecording: support recording WebSocket sessions
Kubernetes currently supports two streaming protocols, SPDY and WebSockets.
WebSockets are replacing SPDY, see
https://github.com/kubernetes/enhancements/issues/4006.
We were currently only supporting SPDY, erroring out if session
was not SPDY and relying on the kube's built-in SPDY fallback.
This PR:
- adds support for parsing contents of 'kubectl exec' sessions streamed
over WebSockets
- adds logic to distinguish 'kubectl exec' requests for a SPDY/WebSockets
sessions and call the relevant handler
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
* cmd/k8s-operator: fix DNS reconciler for dual-stack clusters
This fixes a bug where DNS reconciler logic was always assuming
that no more than one EndpointSlice exists for a Service.
In fact, there can be multiple, for example, in dual-stack
clusters, but also in other cases this is valid (as per kube docs).
This PR:
- allows for multiple EndpointSlices
- picks out the ones for IPv4 family
- deduplicates addresses
Updates tailscale/tailscale#13056
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Package setting contains types for defining and representing policy settings.
It facilitates the registration of setting definitions using Register and RegisterDefinition,
and the retrieval of registered setting definitions via Definitions and DefinitionOf.
This package is intended for use primarily within the syspolicy package hierarchy,
and added in a preparation for the next PRs.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This commit implements TCP GRO for packets being written to gVisor on
Linux. Windows support will follow later. The wireguard-go dependency is
updated in order to make use of newly exported IP checksum functions.
gVisor is updated in order to make use of newly exported
stack.PacketBuffer GRO logic.
TCP throughput towards gVisor, i.e. TUN write direction, is dramatically
improved as a result of this commit. Benchmarks show substantial
improvement, sometimes as high as 2x. High bandwidth-delay product
paths remain receive window limited, bottlenecked by gVisor's default
TCP receive socket buffer size. This will be addressed in a follow-on
commit.
The iperf3 results below demonstrate the effect of this commit between
two Linux computers with i5-12400 CPUs. There is roughly ~13us of round
trip latency between them.
The first result is from commit 57856fc without TCP GRO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec 20 sender
[ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec receiver
The second result is from this commit with TCP GRO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec 20 sender
[ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec receiver
Updates #6816
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This commit implements TCP GSO for packets being read from gVisor on
Linux. Windows support will follow later. The wireguard-go dependency is
updated in order to make use of newly exported GSO logic from its tun
package.
A new gVisor stack.LinkEndpoint implementation has been established
(linkEndpoint) that is loosely modeled after its predecessor
(channel.Endpoint). This new implementation supports GSO of monster TCP
segments up to 64K in size, whereas channel.Endpoint only supports up to
32K. linkEndpoint will also be required for GRO, which will be
implemented in a follow-on commit.
TCP throughput from gVisor, i.e. TUN read direction, is dramatically
improved as a result of this commit. Benchmarks show substantial
improvement through a wide range of RTT and loss conditions, sometimes
as high as 5x.
The iperf3 results below demonstrate the effect of this commit between
two Linux computers with i5-12400 CPUs. There is roughly ~13us of round
trip latency between them.
The first result is from commit 57856fc without TCP GSO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.51 GBytes 2.15 Gbits/sec 154 sender
[ 5] 0.00-10.00 sec 2.49 GBytes 2.14 Gbits/sec receiver
The second result is from this commit with TCP GSO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec 6 sender
[ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec receiver
Updates #6816
Signed-off-by: Jordan Whited <jordan@tailscale.com>
cmd/k8s-operator,k8s-operator/sessionrecording,sessionrecording,ssh/tailssh: refactor session recording functionality
Refactor SSH session recording functionality (mostly the bits related to
Kubernetes API server proxy 'kubectl exec' session recording):
- move the session recording bits used by both Tailscale SSH
and the Kubernetes API server proxy into a shared sessionrecording package,
to avoid having the operator to import ssh/tailssh
- move the Kubernetes API server proxy session recording functionality
into a k8s-operator/sessionrecording package, add some abstractions
in preparation for adding support for a second streaming protocol (WebSockets)
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Re-instates the functionality that generates CRD API docs, but using
a different library as the one we were using earlier seemed to have
some issues with its Git history.
Also regenerates the docs (make kube-generate-all).
Updates tailscale/tailscale#12859
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Updates tailscale/tailscale#1634
This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting.
ipn/ipnlocal: fix captive portal loop shutdown
Change-Id: I7cafdbce68463a16260091bcec1741501a070c95
net/captivedetection: fix mutex misuse
ipn/ipnlocal: ensure that we don't fail to start the timer
Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Remove fybrik.io/crdoc dependency as it is causing issues for folks attempting
to vendor tailscale using GOPROXY=direct.
This means that the CRD API docs in ./k8s-operator/api.md will no longer
be generated- I am going to look at replacing it with another tool
in a follow-up.
Updates tailscale/tailscale#12859
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator,ssh/tailssh,tsnet: optionally record kubectl exec sessions
The Kubernetes operator's API server proxy, when it receives a request
for 'kubectl exec' session now reads 'RecorderAddrs', 'EnforceRecorder'
fields from tailcfg.KubernetesCapRule.
If 'RecorderAddrs' is set to one or more addresses (of a tsrecorder instance(s)),
it attempts to connect to those and sends the session contents
to the recorder before forwarding the request to the kube API
server. If connection cannot be established or fails midway,
it is only allowed if 'EnforceRecorder' is not true (fail open).
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies
Don't skip installing egress forwarding rules for IPv6 (as long as the host
supports IPv6), and set headless services `ipFamilyPolicy` to
`PreferDualStack` to optionally enable both IP families when possible. Note
that even with `PreferDualStack` set, testing a dual-stack GKE cluster with
the default DNS setup of kube-dns did not correctly set both A and
AAAA records for the headless service, and instead only did so when
switching the cluster DNS to Cloud DNS. For both IPv4 and IPv6 to work
simultaneously in a dual-stack cluster, we require headless services to
return both A and AAAA records.
If the host doesn't support IPv6 but the FQDN specified only has IPv6
addresses available, containerboot will exit with error code 1 and an
error message because there is no viable egress route.
Fixes#12215
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new TailscaleProxyReady condition type for use in corev1.Service
conditions.
Also switch our CRDs to use metav1.Condition instead of
ConnectorCondition. The Go structs are seralized identically, but it
updates some descriptions and validation rules. Update k8s
controller-tools and controller-runtime deps to fix the documentation
generation for metav1.Condition so that it excludes comments and
TODOs.
Stop expecting the fake client to populate TypeMeta in tests. See
kubernetes-sigs/controller-runtime#2633 for details of the change.
Finally, make some minor improvements to validation for service hostnames.
Fixes#12216
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
* cmd/containerboot: store device ID before setting up proxy routes.
For containerboot instances whose state needs to be stored
in a Kubernetes Secret, we additonally store the device's
ID, FQDN and IPs.
This is used, between other, by the Kubernetes operator,
who uses the ID to delete the device when resources need
cleaning up and writes the FQDN and IPs on various kube
resource statuses for visibility.
This change shifts storing device ID earlier in the proxy setup flow,
to ensure that if proxy routing setup fails,
the device can still be deleted.
Updates tailscale/tailscale#12146
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* code review feedback
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
---------
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This PR is in prep of adding logic to control to be able to parse
tailscale.com/cap/kubernetes grants in control:
- moves the type definition of PeerCapabilityKubernetes cap to a location
shared with control.
- update the Kubernetes cap rule definition with fields for granting
kubectl exec session recording capabilities.
- adds a convenience function to produce tailcfg.RawMessage from an
arbitrary cap rule and a test for it.
An example grant defined via ACLs:
"grants": [{
"src": ["tag:eng"],
"dst": ["tag:k8s-operator"],
"app": {
"tailscale.com/cap/kubernetes": [{
"recorder": ["tag:my-recorder"]
“enforceRecorder”: true
}],
},
}
]
This grant enforces `kubectl exec` sessions from tailnet clients,
matching `tag:eng` via API server proxy matching `tag:k8s-operator`
to be recorded and recording to be sent to a tsrecorder instance,
matching `tag:my-recorder`.
The type needs to be shared with control because we want
control to parse this cap and resolve tags to peer IPs.
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Add a new .spec.tailscale.acceptRoutes field to ProxyClass,
that can be optionally set to true for the proxies to
accept routes advertized by other nodes on tailnet (equivalent of
setting --accept-routes to true).
Updates tailscale/tailscale#12322,tailscale/tailscale#10684
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Also removes hardcoded image repo/tag from example DNSConfig resource
as the operator now knows how to default those.
Updates tailscale/tailscale#11019
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Add new fields TailnetIPs and Hostname to Connector Status. These
contain the addresses of the Tailscale node that the operator created
for the Connector to aid debugging.
Fixes#12214
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator,k8s-operator,go.{mod,sum}: make individual proxy images/image pull policies configurable
Allow to configure images and image pull policies for individual proxies
via ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.Image,
and ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.ImagePullPolicy
fields.
Document that we have images in ghcr.io on the relevant Helm chart fields.
Updates tailscale/tailscale#11675
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This is done in preparation for adding kubectl
session recording rules to this capability grant that will need to
be unmarshalled by control, so will also need to be
in a shared location.
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator/deploy/chart: Support image 'repo' or 'repository' keys in helm values
Fixes#12100
Signed-off-by: Michael Long <michaelongdev@gmail.com>
Turn off stateful filtering for egress proxies to allow cluster
traffic to be forwarded to tailnet.
Allow configuring stateful filter via tailscaled config file.
Deprecate EXPERIMENTAL_TS_CONFIGFILE_PATH env var and introduce a new
TS_EXPERIMENTAL_VERSIONED_CONFIG env var that can be used to provide
containerboot a directory that should contain one or more
tailscaled config files named cap-<tailscaled-cap-version>.hujson.
Containerboot will pick the one with the newest capability version
that is not newer than its current capability version.
Proxies with this change will not work with older Tailscale
Kubernetes operator versions - users must ensure that
the deployed operator is at the same version or newer (up to
4 version skew) than the proxies.
Updates tailscale/tailscale#12061
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
We are now publishing nameserver images to tailscale/k8s-nameserver,
so we can start defaulting the images if users haven't set
them explicitly, same as we already do with proxy images.
The nameserver images are currently only published for unstable
track, so we have to use the static 'unstable' tag.
Once we start publishing to stable, we can make the operator
default to its own tag (because then we'll know that for each
operator tag X there is also a nameserver tag X as we always
cut all images for a given tag.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: optionally update dnsrecords Configmap with DNS records for proxies.
This commit adds functionality to automatically populate
DNS records for the in-cluster ts.net nameserver
to allow cluster workloads to resolve MagicDNS names
associated with operator's proxies.
The records are created as follows:
* For tailscale Ingress proxies there will be
a record mapping the MagicDNS name of the Ingress
device and each proxy Pod's IP address.
* For cluster egress proxies, configured via
tailscale.com/tailnet-fqdn annotation, there will be
a record for each proxy Pod, mapping
the MagicDNS name of the exposed
tailnet workload to the proxy Pod's IP.
No records will be created for any other proxy types.
Records will only be created if users have configured
the operator to deploy an in-cluster ts.net nameserver
by applying tailscale.com/v1alpha1.DNSConfig.
It is user's responsibility to add the ts.net nameserver
as a stub nameserver for ts.net DNS names.
https://kubernetes.io/docs/tasks/administer-cluster/dns-custom-nameservers/#configuration-of-stub-domain-and-upstream-nameserver-using-corednshttps://cloud.google.com/kubernetes-engine/docs/how-to/kube-dns#upstream_nameservers
See also https://github.com/tailscale/tailscale/pull/11017
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values.
Fixes#11947
Signed-off-by: Gabe Gorelick <gabe@hightouch.io>
* cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster.
Adds a simple nameserver that can respond to A record queries for ts.net DNS names.
It can respond to queries from in-memory records, populated from a ConfigMap
mounted at /config. It dynamically updates its records as the ConfigMap
contents changes.
It will respond with NXDOMAIN to queries for any other record types
(AAAA to be implemented in the future).
It can respond to queries over UDP or TCP. It runs a miekg/dns
DNS server with a single registered handler for ts.net domain names.
Queries for other domain names will be refused.
The intended use of this is:
1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet
services exposed via Tailscale operator egress over HTTPS
2) to allow non-tailnet cluster workloads to talk to workloads in
the same cluster that have been exposed to tailnet over their
MagicDNS names but on their cluster IPs.
DNSConfig CRD can be used to configure
the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Before attempting to enable IPv6 forwarding in the proxy init container
check if the relevant module is found, else the container crashes
on hosts that don't have it.
Updates#11860
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Adds a new .spec.metrics field to ProxyClass to allow users to optionally serve
client metrics (tailscaled --debug) on <Pod-IP>:9001.
Metrics cannot currently be enabled for proxies that egress traffic to tailnet
and for Ingress proxies with tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation
(because they currently forward all cluster traffic to their respective backends).
The assumption is that users will want to have these metrics enabled
continuously to be able to monitor proxy behaviour (as opposed to enabling
them temporarily for debugging). Hence we expose them on Pod IP to make it
easier to consume them i.e via Prometheus PodMonitor.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name
Adds support for optionally configuring containerboot to proxy
traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var
to containerboot.
Containerboot will periodically (every 10 minutes) attempt to resolve
the DNS name and ensure that all traffic sent to the node's
tailnet IP gets forwarded to the resolved backend IP addresses.
Currently:
- if the firewall mode is iptables, traffic will be load balanced
accross the backend IP addresses using round robin. There are
no health checks for whether the IPs are reachable.
- if the firewall mode is nftables traffic will only be forwarded
to the first IP address in the list. This is to be improved.
* cmd/k8s-operator: support ExternalName Services
Adds support for exposing endpoints, accessible from within
a cluster to the tailnet via DNS names using ExternalName Services.
This can be done by annotating the ExternalName Service with
tailscale.com/expose: "true" annotation.
The operator will deploy a proxy configured to route tailnet
traffic to the backend IPs that service.spec.externalName
resolves to. The backend IPs must be reachable from the operator's
namespace.
Updates tailscale/tailscale#10606
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Kubernetes cluster domain defaults to 'cluster.local', but can also be customized.
We need to determine cluster domain to set up in-cluster forwarding to our egress proxies.
This was previously hardcoded to 'cluster.local', so was the egress proxies were not usable in clusters with custom domains.
This PR ensures that we attempt to determine the cluster domain by parsing /etc/resolv.conf.
In case the cluster domain cannot be determined from /etc/resolv.conf, we fall back to 'cluster.local'.
Updates tailscale/tailscale#10399,tailscale/tailscale#11445
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Adds new ProxyClass.spec.statefulSet.pod.{tailscaleContainer,tailscaleInitContainer}.Env field
that allow users to provide key, value pairs that will be set as env vars for the respective containers.
Allow overriding all containerboot env vars,
but warn that this is not supported and might break (in docs + a warning when validating ProxyClass).
Updates tailscale/tailscale#10709
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster.
Adds a simple nameserver that can respond to A record queries for ts.net DNS names.
It can respond to queries from in-memory records, populated from a ConfigMap
mounted at /config. It dynamically updates its records as the ConfigMap
contents changes.
It will respond with NXDOMAIN to queries for any other record types
(AAAA to be implemented in the future).
It can respond to queries over UDP or TCP. It runs a miekg/dns
DNS server with a single registered handler for ts.net domain names.
Queries for other domain names will be refused.
The intended use of this is:
1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet
services exposed via Tailscale operator egress over HTTPS
2) to allow non-tailnet cluster workloads to talk to workloads in
the same cluster that have been exposed to tailnet over their
MagicDNS names but on their cluster IPs.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator/deploy/crds,k8s-operator: add DNSConfig CustomResource Definition
DNSConfig CRD can be used to configure
the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator: optionally reconcile nameserver resources
Adds a new reconciler that reconciles DNSConfig resources.
If a DNSConfig is deployed to cluster,
the reconciler creates kube nameserver resources.
This reconciler is only responsible for creating
nameserver resources and not for populating nameserver's records.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/{k8s-operator,k8s-nameserver}: generate DNSConfig CRD for charts, append to static manifests
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
---------
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Including the double quotes (`"`) around the value made it appear like the helm chart should expect a string value for `installCRDs`.
Signed-off-by: Chris Milson-Tokunaga <chris.w.milson@gmail.com>
Fix a bug where all proxies got configured with --accept-routes set to true.
The bug was introduced in https://github.com/tailscale/tailscale/pull/11238.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This is so that if a backend Service gets created after the Ingress, it gets picked up by the operator.
Updates tailscale/tailscale#11251
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <1687799+knyar@users.noreply.github.com>
Containerboot container created for operator's ingress and egress proxies
are now always configured by passing a configfile to tailscaled
(tailscaled --config <configfile-path>.
It does not run 'tailscale set' or 'tailscale up'.
Upgrading existing setups to this version as well as
downgrading existing setups at this version works.
Updates tailscale/tailscale#10869
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Add logic to autogenerate CRD docs.
.github/workflows/kubemanifests.yaml CI workflow will fail if the doc is out of date with regard to the current CRDs.
Docs can be refreshed by running make kube-generate-all.
Updates tailscale/tailscale#11023
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator: introduce proxy configuration mechanism via ProxyClass custom resource.
ProxyClass custom resource can be used to specify customizations
for the proxy resources created by the operator.
Add a reconciler that validates ProxyClass resources
and sets a Ready condition to True or False with a corresponding reason and message.
This is required because some fields (labels and annotations)
require complex validations that cannot be performed at custom resource apply time.
Reconcilers that use the ProxyClass to configure proxy resources are expected to
verify that the ProxyClass is Ready and not proceed with resource creation
if configuration from a ProxyClass that is not yet Ready is required.
If a tailscale ingress/egress Service is annotated with a tailscale.com/proxy-class annotation, look up the corresponding ProxyClass and, if it is Ready, apply the configuration from the ProxyClass to the proxy's StatefulSet.
If a tailscale Ingress has a tailscale.com/proxy-class annotation
and the referenced ProxyClass custom resource is available and Ready,
apply configuration from the ProxyClass to the proxy resources
that will be created for the Ingress.
Add a new .proxyClass field to the Connector spec.
If connector.spec.proxyClass is set to a ProxyClass that is available and Ready,
apply configuration from the ProxyClass to the proxy resources created for the Connector.
Ensure that when Helm chart is packaged, the ProxyClass yaml is added to chart templates. Ensure that static manifest generator adds ProxyClass yaml to operator.yaml. Regenerate operator.yaml
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/containerboot,cmd/k8s-operator/deploy/manifests: optionally forward cluster traffic via ingress proxy.
If a tailscale Ingress has tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation, configure the associated ingress proxy to have its tailscale serve proxy to listen on Pod's IP address. This ensures that cluster traffic too can be forwarded via this proxy to the ingress backend(s).
In containerboot, if EXPERIMENTAL_PROXY_CLUSTER_TRAFFIC_VIA_INGRESS is set to true
and the node is Kubernetes operator ingress proxy configured via Ingress,
make sure that traffic from within the cluster can be proxied to the ingress target.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Do not provision resources for a tailscale Ingress that has no valid backends.
Updates tailscale/tailscale#10910
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Also perform minor cleanups on the ctxkey package itself.
Provide guidance on when to use ctxkey.Key[T] over ctxkey.New.
Also, allow for interface kinds because the value wrapping trick
also happens to fix edge cases with interfaces in Go.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
To reduce the likelihood of breaking users,
if we implement stricter Exact path type matching in the future.
Updates tailscale/tailscale#10730
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
So that users have predictable label values to use when configuring network policies.
Updates tailscale/tailscale#10854
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator/deploy: deploy a Tailscale IngressClass resource.
Some Ingress validating webhooks reject Ingresses with
.spec.ingressClassName for which there is no matching IngressClass.
Additionally, validate that the expected IngressClass is present,
when parsing a tailscale `Ingress`.
We currently do not utilize the IngressClass,
however we might in the future at which point
we might start requiring that the right class
for this controller instance actually exists.
Updates tailscale/tailscale#10820
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
The configuration knob (that defaulted to Connector being disabled)
was added largely because the Connector CRD had to be installed in a separate step.
Now when the CRD has been added to both chart and static manifest, we can have it on by default.
Updates tailscale/tailscale#10878
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: fix base truncating for extra long Service names
StatefulSet names for ingress/egress proxies are calculated
using Kubernetes name generator and the parent resource name
as a base.
The name generator also cuts the base, but has a higher max cap.
This commit fixes a bug where, if we get a shortened base back
from the generator, we cut off too little as the base that we
have cut will be passed into the generator again, which will
then itself cut less because the base is shorter- so we end up
with a too long name again.
Updates tailscale/tailscale#10807
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Irbe Krumina <irbekrm@gmail.com>
cmd/k8s-operator: add CRD to chart and static manifest
Add functionality to insert CRD to chart at package time.
Insert CRD to static manifests as this is where they are currently consumed from.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR.
Make it possible to define an exit node to be deployed to a Kubernetes cluster
via Connector Custom resource.
Also changes to Connector API so that one Connector corresponds
to one Tailnet node that can be either a subnet router or an exit
node or both.
The Kubernetes operator parses Connector custom resource and,
if .spec.isExitNode is set, configures that Tailscale node deployed
for that connector as an exit node.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
* k8s-operator,cmd/k8s-operator,Makefile,scripts,.github/workflows: add Connector kube CRD.
Connector CRD allows users to configure the Tailscale Kubernetes operator
to deploy a subnet router to expose cluster CIDRs or
other CIDRs available from within the cluster
to their tailnet.
Also adds various CRD related machinery to
generate CRD YAML, deep copy implementations etc.
Engineers will now have to run
'make kube-generate-all` after changing kube files
to ensure that all generated files are up to date.
* cmd/k8s-operator,k8s-operator: reconcile Connector resources
Reconcile Connector resources, create/delete subnetrouter resources in response to changes to Connector(s).
Connector reconciler will not be started unless
ENABLE_CONNECTOR env var is set to true.
This means that users who don't want to use the alpha
Connector custom resource don't have to install the Connector
CRD to their cluster.
For users who do want to use it the flow is:
- install the CRD
- install the operator (via Helm chart or using static manifests).
For Helm users set .values.enableConnector to true, for static
manifest users, set ENABLE_CONNECTOR to true in the static manifest.
Updates tailscale/tailscale#502
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator: generate static manifests from Helm charts
This is done to ensure that there is a single source of truth
for the operator kube manifests.
Also adds linux node selector to the static manifests as
this was added as a default to the Helm chart.
Static manifests can now be generated by running
`go generate tailscale.com/cmd/k8s-operator`.
Updates tailscale/tailscale#9222
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/containerboot: proxy traffic to tailnet target defined by FQDN
Add a new Service annotation tailscale.com/tailnet-fqdn that
users can use to specify a tailnet target for which
an egress proxy should be deployed in the cluster.
Updates tailscale/tailscale#10280
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Kubernetes can generate StatefulSet names that are too long and result in invalid Pod revision hash label values.
Calculate whether a StatefulSet name generated for a Service or Ingress
will be too long and if so, truncate it.
Updates tailscale/tailscale#10284
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Updates tailscale/tailscale#9222
plain k8s-operator should have hostinfo.App set to 'k8s-operator', operator with proxy should have it set to 'k8s-operator-proxy'. In proxy mode, we were setting the type after it had already been set to 'k8s-operator'
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
API v1 is compatible with helm v2 and v2 is not.
However, helm v2 (the Tiller deployment mechanism) was deprecated in 2020
and no-one should be using it anymore.
This PR also adds a CI lint test for helm chart
Updates tailscale/tailscale#9222
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Users should delete proxies by deleting or modifying the k8s cluster resources
that they used to tell the operator to create they proxy. With this flow,
the tailscale operator will delete the associated device from the control.
However, in some cases users might have already deleted the device from the control manually.
Updates tailscale/tailscale#9773
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator: users can configure operator to set firewall mode for proxies
Users can now pass PROXY_FIREWALL_MODE={nftables,auto,iptables} to operator to make it create ingress/egress proxies with that firewall mode
Also makes sure that if an invalid firewall mode gets configured, the operator will not start provisioning proxy resources, but will instead log an error and write an error event to the related Service.
Updates tailscale/tailscale#9310
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We were too strict and required the user not specify the host field at all
in the ingress rules, but that degrades compatibility with existing helm charts.
Relax the constraint so that rule.Host can either be empty, or match the tls.Host[0]
value exactly.
Fixes#9548
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Replace the deprecated var with the one in docs to avoid confusion.
Introduced in 335a5aaf9a.
Updates #8317Fixes#9764
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Ensure that when there is an event on a Tailscale managed Ingress or Service child resource, the right parent type gets reconciled
Updates tailscale/tailscale#502
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
It was tailscale.com/ts-tailnet-target-ip, which was pretty
redundant. Change it to tailscale.com/tailnet-ip.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a new RawMessage type backed by string instead of the
json.RawMessage which is backed by []byte. The byte slice makes
the generated views be a lot more defensive than the need to be
which we can get around by using a string instead.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The kube-apiserver proxy in the operator would only run in
auth proxy mode but thats not always desirable. There are
situations where the proxy should just be a transparent
proxy and not inject auth headers, so do that using a new
env var APISERVER_PROXY and deprecate the AUTH_PROXY env.
THe new env var has three options `false`, `true` and `noauth`.
Updates #8317
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Instead of confusing users, emit an event that explicitly tells the
user that HTTPS is disabled on the tailnet and that ingress may not
work until they enable it.
Updates #9141
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Ensures that Statefulset reconciler config has only one of Cluster target IP or tailnet target IP.
Adds a test case for containerboot egress proxy mode.
Updates tailscale/tailscale#8184
Signed-off-by: irbekrm <irbekrm@gmail.com>
First part of work for the functionality that allows users to create an egress
proxy to access Tailnet services from within Kubernetes cluster workloads.
This PR allows creating an egress proxy that can access Tailscale services over HTTP only.
Updates tailscale/tailscale#8184
Signed-off-by: irbekrm <irbekrm@gmail.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
We would call Update on the secret, but that was racey and would occasionaly
fail. Instead use patch whenever we can.
Fixes errors like
```
boot: 2023/08/29 01:03:53 failed to set serve config: sending serve config: updating config: writing ServeConfig to StateStore: Operation cannot be fulfilled on secrets "ts-webdav-kfrzv-0": the object has been modified; please apply your changes to the latest version and try again
{"level":"error","ts":"2023-08-29T01:03:48Z","msg":"Reconciler error","controller":"ingress","controllerGroup":"networking.k8s.io","controllerKind":"Ingress","Ingress":{"name":"webdav","namespace":"default"},"namespace":"default","name":"webdav","reconcileID":"96f5cfed-7782-4834-9b75-b0950fd563ed","error":"failed to provision: failed to create or get API key secret: Operation cannot be fulfilled on secrets \"ts-webdav-kfrzv-0\": the object has been modified; please apply your changes to the latest version and try again","stacktrace":"sigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).reconcileHandler\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:324\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).processNextWorkItem\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:265\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).Start.func2.2\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:226"}
```
Updates #502
Updates #7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This was added in 3451b89e5f, but
resulted in the v6 Tailscale address being added to status when
when the forwarding only happened on the v4 address.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The new ingress reconcile raises events on failure, but I forgot to
add the updated permission.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously, the operator would only monitor Services and create
a Tailscale StatefulSet which acted as a L3 proxy which proxied
traffic inbound to the Tailscale IP onto the services ClusterIP.
This extends that functionality to also monitor Ingress resources
where the `ingressClassName=tailscale` and similarly creates a
Tailscale StatefulSet, acting as a L7 proxy instead.
Users can override the desired hostname by setting:
```
- tls
hosts:
- "foo"
```
Hostnames specified under `rules` are ignored as we only create a single
host. This is emitted as an event for users to see.
Fixes#7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously users would have to unexpose/expose the service in order to
change Hostname/TargetIP. This now applies those changes by causing a
StatefulSet rollout now that a61a9ab087 is in.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
I'm not saying it works, but it compiles.
Updates #5794
Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I forgot to move the defer out of the func, so the tsnet.Server
immediately closed after starting.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was jumbled doing a lot of things, this breaks it up into
the svc reconciliation and the tailscale sts reconciliation.
Prep for future commit.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously we would use the Impersonate-Group header to pass through
tags to the k8s api server. However, we would do nothing for non-tagged
nodes. Now that we have a way to specify these via peerCaps respect those
and send down groups for non-tagged nodes as well.
For tagged nodes, it defaults to sending down the tags as groups to retain
legacy behavior if there are no caps set. Otherwise, the tags are omitted.
Updates #5055
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The client/tailscale is a stable-ish API we try not to break. Revert
the Client.CreateKey method as it was and add a new
CreateKeyWithExpiry method to do the new thing. And document the
expiry field and enforce that the time.Duration can't be between in
range greater than 0 and less than a second.
Updates #7143
Updates #8124 (reverts it, effectively)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a parameter for create key that allows a number of seconds
(less than 90) to be specified for new keys.
Fixes https://github.com/tailscale/tailscale/issues/7965
Signed-off-by: Matthew Brown <matthew@bargrove.com>
getSingleObject can return `nil, nil`, getDeviceInfo was not handling
that case which resulted in panics.
Fixes#7303
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c
Kubernetes uses SPDY/3.1 which is incompatible with HTTP/2, disable it
in the transport and server.
Fixes#7645Fixes#7646
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We were not handling tags at all, pass them through as Impersonate-Group headers.
And use the FQDN for tagged nodes as Impersonate-User.
Updates #5055
Signed-off-by: Maisem Ali <maisem@tailscale.com>
"Device Authorization" was recently renamed to "Device Approval"
on the control side. This change updates the k8s operator to match.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This allows us to differentiate between the various tsnet apps that
we have like `golinks` and `k8s-operator`.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
There is no stable release yet, and for alpha we want people on the
unstable build while we iterate.
Updates #502
Signed-off-by: David Anderson <danderson@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
The dependency injection functionality has been deprecated a while back
and it'll be removed in the 0.15 release of Controller Runtime. This
changeset sets the Client after creating the Manager, instead of using
InjectClient.
Signed-off-by: Vince Prignano <vince@prigna.com>
The operator creates a fair bit of internal cluster state to manage proxying,
dumping it all in the default namespace is handy for development but rude
for production.
Updates #502
Signed-off-by: David Anderson <danderson@tailscale.com>
We used to need to do timed requeues in a few places in the reconcile logic,
and the easiest way to do that was to plumb reconcile.Result return values
around. But now we're purely event-driven, so the only thing we care about
is whether or not an error occurred.
Incidentally also fix a very minor bug where headless services would get
completely ignored, rather than reconciled into the correct state. This
shouldn't matter in practice because you can't transition from a headful
to a headless service without a deletion, but for consistency let's avoid
having a path that takes no definite action if a service of interest does
exist.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
Previously, we had to do blind timed requeues while waiting for
the tailscale hostname, because we looked up the hostname through
the API. But now the proxy container image writes back its hostname
to the k8s secret, so we get an event-triggered reconcile automatically
when the time is right.
Updates #502
Signed-off-by: David Anderson <danderson@tailscale.com>
As is convention in the k8s world, use zap for structured logging. For
development, OPERATOR_LOGGING=dev switches to a more human-readable output
than JSON.
Updates #502
Signed-off-by: David Anderson <danderson@tailscale.com>
Our reconcile loop gets triggered again when the StatefulSet object
finally disappears (in addition to when its deletion starts, as indicated
by DeletionTimestamp != 0). So, we don't need to queue additional
reconciliations to proceed with the remainder of the cleanup, that
happens organically.
Signed-off-by: David Anderson <danderson@tailscale.com>
Tests cover configuring a proxy through an annotation rather than a
LoadBalancerClass, and converting between those two modes at runtime.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
For other test cases, the operator is going to produce similar generated
objects in several codepaths, and those objects are large. Move them out
to helpers so that the main test code stays a bit more intelligible.
The top-level Service that we start and end with remains in the main test
body, because its shape at the start and end is one of the main things that
varies a lot between test cases.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
The test verifies one of the successful reconcile paths, where
a client requests an exposed service via a LoadBalancer class.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
Also introduces an intermediary interface for the tailscale client, in
preparation for operator tests that fake out the Tailscale API interaction.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
This was initially developed in a separate repo, but for build/release
reasons and because go module management limits the damage of importing
k8s things now, moving it into this repo.
At time of commit, the operator enables exposing services over tailscale,
with the 'tailscale' loadBalancerClass. It also currently requires an
unreleased feature to access the Tailscale API, so is not usable yet.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
