Add and wire up event publishers for these two event types in the AppConnector.
Nothing currently subscribes to them, so this is harmless. Subscribers for
these events will be added in a near-future commit.
As part of this, move the appc.RouteInfo type to the types/appctype package.
It does not contain any package-specific details from appc. Beside it, add
appctype.RouteUpdate to carry route update event state, likewise not specific
to appc. Update all usage of the appc.* types throughout to use appctype.*
instead, and update depaware files to reflect these changes.
Add a Close method to the AppConnector to make sure the client gets cleaned up
when the connector is dropped (we re-create connectors).
Update the unit tests in the appc package to also check the events published
alongside calls to the RouteAdvertiser.
For now the tests still rely on the RouteAdvertiser for correctness; this is OK
for now as the two methods are always performed together. In the near future,
we need to rework the tests so not require that, but that will require building
some more test fixtures that we can handle separately.
Updates #15160
Updates #17192
Change-Id: I184670ba2fb920e0d2cb2be7c6816259bca77afe
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Require the presence of the bus, but do not use it yet. Check for required
fields and update tests and production use to plumb the necessary arguments.
Updates #15160
Updates #17192
Change-Id: I8cefd2fdb314ca9945317d3320bd5ea6a92e8dcb
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
The callback itself is not removed as it is used in other repos, making
it simpler for those to slowly transition to the eventbus.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Replace the positional arguments to NewAppConnector with a Config struct.
Update the existing uses. Other than the API change, there are no functional
changes in this commit.
Updates #15160
Updates #17192
Change-Id: Ibf37f021372155a4db8aaf738f4b4f2c746bf623
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
And yay: tsnet (and thus k8s-operator etc) no longer depends on
portlist! And LocalBackend is smaller.
Removes 50 KB from the minimal binary.
Updates #12614
Change-Id: Iee04057053dc39305303e8bd1d9599db8368d926
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I think this was originally a brain-o in 9380e2dfc61a720d. It's
disabling the port _poller_, listing what open ports (i.e. services)
are open, not PMP/PCP/UPnP port mapping.
While there, drop in some more testenv.AssertInTest() in a few places.
Updates #cleanup
Change-Id: Ia6f755ad3544f855883b8a7bdcfc066e8649547b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The Tracker was using direct callbacks to ipnlocal. This PR moves those
to be triggered via the eventbus.
Additionally, the eventbus is now closed on exit from tailscaled
explicitly, and health is now a SubSystem in tsd.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
This is a small introduction of the eventbus into controlclient that
communicates with mainly ipnlocal. While ipnlocal is a complicated part
of the codebase, the subscribers here are from the perspective of
ipnlocal already called async.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Now that we have policytest and the policyclient.Client interface, we
can de-global-ify many of the tests, letting them run concurrently
with each other, and just removing global variable complexity.
This does ~half of the LocalBackend ones.
Updates #16998
Change-Id: Iece754e1ef4e49744ccd967fa83629d0dca6f66a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Step 4 of N. See earlier commits in the series (via the issue) for the
plan.
This adds the missing methods to policyclient.Client and then uses it
everywhere in ipn/ipnlocal and locks it in with a new dep test.
Still plenty of users of the global syspolicy elsewhere in the tree,
but this is a lot of them.
Updates #16998
Updates #12614
Change-Id: I25b136539ae1eedbcba80124de842970db0ca314
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is step 1 of ~3, breaking up #14720 into reviewable chunks, with
the aim to make syspolicy be a build-time configurable feature.
In this first (very noisy) step, all the syspolicy string key
constants move to a new constant-only (code-free) package. This will
make future steps more reviewable, without this movement noise.
There are no code or behavior changes here.
The future steps of this series can be seen in #14720: removing global
funcs from syspolicy resolution and using an interface that's plumbed
around instead. Then adding build tags.
Updates #12614
Change-Id: If73bf2c28b9c9b1a408fe868b0b6a25b03eeabd1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There are several methods within the LocalBackend that used an unusual and
error-prone lock discipline whereby they require the caller to hold the backend
mutex on entry, but release it on the way out.
In #11650 we added some support code to make this pattern more visible.
Now it is time to eliminate the pattern (at least within this package).
This is intended to produce no semantic changes, though I am relying on
integration tests and careful inspection to achieve that.
To the extent possible I preserved the existing control flow. In a few places,
however, I replaced this with an unlock/lock closure. This means we will
sometimes reacquire a lock only to release it again one frame up the stack, but
these operations are not performance sensitive and the legibility gain seems
worthwhile.
We can probably also pull some of these out into separate methods, but I did
not do that here so as to avoid other variable scope changes that might be hard
to see. I would like to do some more cleanup separately.
As a follow-up, we could also remove the unlockOnce helper, but I did not do
that here either.
Updates #11649
Change-Id: I4c92d4536eca629cfcd6187528381c33f4d64e20
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
dnstype.Resolver adds a boolean UseWithExitNode that controls
whether the resolver should be used in tailscale exit node contexts
(not wireguard exit nodes). If UseWithExitNode resolvers are found,
they are installed as the global resolvers. If no UseWithExitNode resolvers
are found, the exit node resolver continues to be installed as the global
resolver. Split DNS Routes referencing UseWithExitNode resolvers are also
installed.
Updates #8237Fixestailscale/corp#30906Fixestailscale/corp#30907
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
In the components where an event bus is already plumbed through, remove the
exceptions that allow it to be omitted, and update all the tests that relied on
those workarounds execute properly.
This change applies only to the places where we're already using the bus; it
does not enforce the existence of a bus in other components (yet),
Updates #15160
Change-Id: Iebb92243caba82b5eb420c49fc3e089a77454f65
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
In #16625, I introduced a mechanism for sending the selected exit node
to Control via tailcfg.Hostinfo.ExitNodeID as part of the MapRequest.
@nickkhyl pointed out that LocalBackend.doSetHostinfoFilterServices
needs to be triggered in order to actually send this update. This
patch adds that command. It also prevents the client from sending
"auto:any" in that field, because that’s not a real exit node ID.
This patch also fills in some missing checks in TestConfigureExitNode.
Updates tailscale/corp#30536
Signed-off-by: Simon Law <sfllaw@tailscale.com>
When a client selects a particular exit node, Control may use that as
a signal for deciding other routes.
This patch causes the client to report whenever the current exit node
changes, through tailcfg.Hostinfo.ExitNodeID. It relies on a properly
set ipn.Prefs.ExitNodeID, which should already be resolved by
`tailscale set`.
Updates tailscale/corp#30536
Signed-off-by: Simon Law <sfllaw@tailscale.com>
With auto exit nodes enabled, the client picks exit nodes from the
ones advertised in the network map. Usually, it picks the one with the
highest priority score, but when the top spot is tied, it used to pick
randomly. Then, once it made a selection, it would strongly prefer to
stick with that exit node. It wouldn’t even consider another exit node
unless the client was shutdown or the exit node went offline. This is
to prevent flapping, where a client constantly chooses a different
random exit node.
The major problem with this algorithm is that new exit nodes don’t get
selected as often as they should. In fact, they wouldn’t even move
over if a higher scoring exit node appeared.
Let’s say that you have an exit node and it’s overloaded. So you spin
up a new exit node, right beside your existing one, in the hopes that
the traffic will be split across them. But since the client had this
strong affinity, they stick with the exit node they know and love.
Using rendezvous hashing, we can have different clients spread
their selections equally across their top scoring exit nodes. When an
exit node shuts down, its clients will spread themselves evenly to
their other equal options. When an exit node starts, a proportional
number of clients will migrate to their new best option.
Read more: https://en.wikipedia.org/wiki/Rendezvous_hashing
The trade-off is that starting up a new exit node may cause some
clients to move over, interrupting their existing network connections.
So this change is only enabled for tailnets with `traffic-steering`
enabled.
Updates tailscale/corp#29966
Fixes#16551
Signed-off-by: Simon Law <sfllaw@tailscale.com>
When `tailscale exit-node suggest` contacts the LocalAPI for a
suggested exit node, the client consults its netmap for peers that
contain the `suggest-exit-node` peercap. It currently uses a series of
heuristics to determine the exit node to suggest.
When the `traffic-steering` feature flag is enabled on its tailnet,
the client will defer to Control’s priority scores for a particular
peer. These scores, in `tailcfg.Hostinfo.Location.Priority`, were
historically only used for Mullvad exit nodes, but they have now been
extended to score any peer that could host a redundant resource.
Client capability version 119 is the earliest client that understands
these traffic steering scores. Control tells the client to switch to
rely on these scores by adding `tailcfg.NodeAttrTrafficSteering` to
its `AllCaps`.
Updates tailscale/corp#29966
Signed-off-by: Simon Law <sfllaw@tailscale.com>
If the GUI receives a new exit node ID before the new netmap, it may treat the node as offline or invalid
if the previous netmap didn't include the peer at all, or if the peer was offline or not advertised as an exit node.
This may result in briefly issuing and dismissing a warning, or a similar issue, which isn't ideal.
In this PR, we change the operation order to send the new netmap to clients first before selecting the new exit node
and notifying them of the Exit Node change.
Updates tailscale/corp#30252 (an old issue discovered during testing this)
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We already check this for cases where ipn.Prefs.AutoExitNode is configured via syspolicy.
Configuring it directly through EditPrefs should behave the same, so we add a test for that as well.
Additionally, we clarify the implementation and future extensibility in (*LocalBackend).resolveAutoExitNodeLocked,
where the AutoExitNode is actually enforced.
Updates tailscale/corp#29969
Updates #cleanup
Signed-off-by: Nick Khyl <nickk@tailscale.com>
So it can be used from the CLI without importing ipnlocal.
While there, also remove isAutoExitNodeID, a wrapper around parseAutoExitNodeID
that's no longer used.
Updates tailscale/corp#29969
Updates #cleanup
Signed-off-by: Nick Khyl <nickk@tailscale.com>
When the policy setting is enabled, it allows users to override the exit node enforced by the ExitNodeID
or ExitNodeIP policy. It's primarily intended for use when ExitNodeID is set to auto:any, but it can also
be used with specific exit nodes. It does not allow disabling exit node usage entirely.
Once the exit node policy is overridden, it will not be enforced again until the policy changes,
the user connects or disconnects Tailscale, switches profiles, or disables the override.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Now that applySysPolicy is only called by (*LocalBackend).reconcilePrefsLocked,
we can make it a method to avoid passing state via parameters and to support
future extensibility.
Also factor out exit node-specific logic into applyExitNodeSysPolicyLocked.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We extract checkEditPrefsAccessLocked, adjustEditPrefsLocked, and onEditPrefsLocked from the EditPrefs
execution path, defining when each step is performed and what behavior is allowed at each stage.
Currently, this is primarily used to support Always On mode, to handle the Exit Node enablement toggle,
and to report prefs edit metrics.
We then use it to enforce Exit Node policy settings by preventing users from setting an exit node
and making EditPrefs return an error when an exit node is restricted by policy. This enforcement is also
extended to the Exit Node toggle.
These changes prepare for supporting Exit Node overrides when permitted by policy and preventing logout
while Always On mode is enabled.
In the future, implementation of these methods can be delegated to ipnext extensions via the feature hooks.
Updates tailscale/corp#29969
Updates tailscale/corp#26249
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We have several places where we call applySysPolicy, suggestExitNodeLocked, and setExitNodeID.
While there are cases where we want to resolve the exit node specifically, such as when network
conditions change or a new netmap is received, we typically need to perform all three steps.
For example, enforcing policy settings may enable auto exit nodes or set an ExitNodeIP,
which in turn requires picking a suggested exit node or resolving the IP to an ID, respectively.
In this PR, we introduce (*LocalBackend).resolveExitNodeInPrefsLocked and (*LocalBackend).reconcilePrefsLocked,
with the latter calling both applySysPolicy and resolveExitNodeInPrefsLocked.
Consolidating these steps into a single extensibility point would also make it easier to support
future hooks registered by ipnext extensions.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we update setExitNodeID to retain the existing exit node if auto exit node is enabled,
the current exit node is allowed by policy, and no suggested exit node is available yet.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Now that (*LocalBackend).suggestExitNodeLocked is never called with a non-current netmap
(the netMap parameter is always nil, indicating that the current netmap should be used),
we can remove the unused parameter.
Additionally, instead of suggestExitNodeLocked passing the most recent full netmap to suggestExitNode,
we now pass the current nodeBackend so it can access peers with delta updates applied.
Finally, with that fixed, we no longer need to skip TestUpdateNetmapDeltaAutoExitNode.
Updates tailscale/corp#29969
Fixes#16455
Signed-off-by: Nick Khyl <nickk@tailscale.com>
With this change, policy enforcement and exit node resolution can happen in separate steps,
since enforcement no longer depends on resolving the suggested exit node. This keeps policy
enforcement synchronous (e.g., when switching profiles), while allowing exit node resolution
to be asynchronous on netmap updates, link changes, etc.
Additionally, the new preference will be used to let GUIs and CLIs switch back to "auto" mode
after a manual exit node override, which is necessary for tailscale/corp#29969.
Updates tailscale/corp#29969
Updates #16459
Signed-off-by: Nick Khyl <nickk@tailscale.com>
TestSetControlClientStatusAutoExitNode is broken similarly to TestUpdateNetmapDeltaAutoExitNode
as suggestExitNode didn't previously check the online status of exit nodes, and similarly to the other test
it succeeded because the test itself is also broken.
However, it is easier to fix as it sends out a full netmap update rather than a delta peer update,
so it doesn't depend on the same refactoring as TestSetControlClientStatusAutoExitNode.
Updates #16455
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
suggestExitNode never checks whether an exit node candidate is online.
It also accepts a full netmap, which doesn't include changes from delta updates.
The test can't work correctly until both issues are fixed.
Previously, it passed only because the test itself is flawed.
It doesn't succeed because the currently selected node goes offline and a new one is chosen.
Instead, it succeeds because lastSuggestedExitNode is incorrect, and suggestExitNode picks
the correct node the first time it runs, based on the DERP map and the netcheck report.
The node in exitNodeIDWant just happens to be the optimal choice.
Fixing SuggestExitNode requires refactoring its callers first, which in turn reveals the flawed test,
as suggestExitNode ends up being called slightly earlier.
In this PR, we update the test to correctly fail due to existing bugs in SuggestExitNode,
and temporarily skip it until those issues are addressed in a future commit.
Updates #16455
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We would like to start sending whether a node is a Tailnet owner in netmap responses so that clients can determine what information to display to a user who wants to request account deletion.
Updates tailscale/corp#30016
Signed-off-by: kari-ts <kari@tailscale.com>
This commit fixes the bug that c2n requests are skiped when updating vipServices in serveConfig. This then resulted
netmap update being skipped which caused inaccuracy of Capmap info on client side. After this fix, client always
inform control about it's vipServices config changes.
Fixestailscale/corp#29219
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
This is an integration test that covers all the code in Direct, Auto, and
LocalBackend that processes NetMaps and creates a Filter. The test uses
tsnet as a convenient proxy for setting up all the client pieces correctly,
but is not actually a test specific to tsnet.
Updates tailscale/corp#20514
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
This adds a feature/taildrop package, a ts_omit_taildrop build tag,
and starts moving code to feature/taildrop. In some cases, code
remains where it was but is now behind a build tag. Future changes
will move code to an extension and out of LocalBackend, etc.
Updates #12614
Change-Id: Idf96c61144d1a5f707039ceb2ff59c99f5c1642f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
