When we don't care about the payload value and are just checking whether
a set contains an IP/prefix, we can use `bart.Lite` for the same lookup
times but a lower memory footprint.
Fixes#19075
Change-Id: Ia709e8b718666cc61ea56eac1066467ae0b6e86c
Signed-off-by: Alex Chan <alexc@tailscale.com>
When a client starts up without being able to connect to control, it
sends its discoKey to other nodes it wants to communicate with over
TSMP. This disco key will be a newer key than the one control knows
about.
If the client that can connect to control gets a full netmap, ensure
that the disco key for the node not connected to control is not
overwritten with the stale key control knows about.
This is implemented through keeping track of mapSession and use that for
the discokey injection if it is available. This ensures that we are not
constantly resetting the wireguard connection when getting the wrong
keys from control.
This is implemented as:
- If the key is received via TSMP:
- Set lastSeen for the peer to now()
- Set online for the peer to false
- When processing new keys, only accept keys where either:
- Peer is online
- lastSeen is newer than existing last seen
If mapSession is not available, as in we are not yet connected to
control, punt down the disco key injection to magicsock.
Ideally, we will want to have mapSession be long lived at some point in
the near future so we only need to inject keys in one location and then
also use that for testing and loading the cache, but that is a yak for
another PR.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Adds envknobs to override the netstack default TCP keepalive idle time
(~2h) and probe interval (75s) for forwarded connections.
When a tailnet peer goes away without closing its connections (pod
deleted, peer removed from the netmap, silent network partition), the
forwardTCP io.Copy goroutines block until keepalive fires: the
gvisor-side Read waits on a peer that will never send again, and the
backend-side Read waits on a backend that is alive and idle. With the
netstack default of 7200s idle + 9×75s probes, dead-peer detection
takes a little over two hours. Under high-churn forwarding — many
short-lived peers, or peers holding thousands of proxied connections
that drop at once — stuck goroutines accumulate faster than they clear.
The existing SetKeepAlive(true) at this site enables keepalive without
setting the timers; the TODO above it noted "a shorter default might
be better" and "might be a useful user-tunable". This makes both
timers tunable without changing the defaults: unset preserves the ~2h
behavior, which is the right trade-off for battery-powered peers.
The two knobs are independent — setting one leaves the other at the
netstack default. The options are set before SetKeepAlive(true) so the
timer arms with the configured values rather than the defaults —
matches the order in ipnlocal/local.go for SSH keepalive.
Updates #4522
Signed-off-by: Josef Bacik <josefbacik@anthropic.com>
For the purpose of improved observability of UDP socket receive buffer
overflows on Linux.
Updates tailscale/corp#37679
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Add two small APIs to support out-of-tree projects to exchange custom
signaling messages over DERP without requiring disco protocol
extensions:
- OnDERPRecv callback on magicsock.Options / wgengine.Config: called for
every non-disco DERP packet before the peer map lookup, allowing callers
to intercept packets from unknown peers that would otherwise be dropped.
- SendDERPPacketTo method on magicsock.Conn: sends arbitrary bytes to a
node key via a DERP region, creating the connection if needed. Thin
wrapper around the existing internal sendAddr.
Also allow netstack.Start to accept a nil LocalBackend for use cases
that wire up TCP/UDP handlers directly without a full LocalBackend.
Updates tailscale/corp#24454
Change-Id: I99a523ef281625b8c0024a963f5f5bf5d8792c17
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In TestUserspaceEnginePortReconfig, when selecting a port, use a random offset rather than searching in a continguous range in case there is a range that is blocked
Updates tailscale/tailscale#2855
Signed-off-by: kari-ts <kari@tailscale.com>
Fix three independent flake sources, at least as debugged by Claude,
though empirically no longer flaking as it was before:
1. Poll for connection counter data instead of reading immediately.
The conncount callback fires asynchronously on received WireGuard
traffic, so after counts.Reset() there is no guarantee the counter
has been repopulated before checkStats reads it. Use tstest.WaitFor
with a 5s timeout to retry until a matching connection appears.
2. Replace the *2 symmetry assumption in global metric assertions.
metricSendUDP and friends are AggregateCounters that sum per-conn
expvars from both magicsock instances. The old assertion assumed
both instances had identical packet counts, which breaks under
asymmetric background WireGuard activity (handshake retries, etc).
The new assertGlobalMetricsMatchPerConn computes the actual sum of
both conns' expvars and compares against the AggregateCounter value.
3. Tolerate physical stats being 0 when user metrics are non-zero.
A rebind event replaces the socket mid-measurement, resetting the
physical connection counter while user metrics still reflect packets
processed before the rebind. Log instead of failing in this case.
Also move counts.Reset() after metric reads and reorder the reset
sequence (counts before metrics) to minimize the race window.
Fixestailscale/tailscale#13420
Change-Id: I7b090a4dc229a862c1a52161b3f2547ec1d1f23f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fix its/it's, who's/whose, wether/whether, missing apostrophes
in contractions, and other misspellings across the codebase.
Updates #cleanup
Change-Id: I20453b81a7aceaa14ea2a551abba08a2e7f0a1d8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When a Linux system acts as an exit node or subnet router with strict
reverse path filtering (rp_filter=1), reply packets may
be dropped because they fail the RPF check. Reply packets arrive on the
WAN interface but the routing table indicates they should have arrived
on the Tailscale interface, causing the kernel to drop them.
This adds firewall rules in the mangle table to save outbound packet
marks to conntrack and restore them on reply packets before the routing
decision. When reply packets have their marks restored, the kernel uses
the correct routing table (based on the mark) and the packets pass the
rp_filter check.
Implementation adds two rules per address family (IPv4/IPv6):
- mangle/OUTPUT: Save packet marks to conntrack for NEW connections
with non-zero marks in the Tailscale fwmark range (0xff0000)
- mangle/PREROUTING: Restore marks from conntrack to packets for
ESTABLISHED,RELATED connections before routing decision and rp_filter
check
The workaround is automatically enabled when UseConnmarkForRPFilter is
set in the router configuration, which happens when subnet routes are
advertised on Linux systems.
Both iptables and nftables implementations are provided, with automatic
backend detection.
Fixes#3310Fixes#14409Fixes#12022Fixes#15815Fixes#9612
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
To be less spammy in stable, add a nob that disables the creation and
processing of TSMPDiscoKeyAdvertisements until we have a proper rollout
mechanism.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
The "public key moved" panic has caused confusion on multiple occasions,
and is a known issue for Mullvad. Add a loose heuristic to detect
Mullvad nodes, and trigger distinct panics for Mullvad and non-Mullvad
instances, with a link to the associated bug.
When this occurs again with Mullvad, it'll be easier for somebody to
find the existing bug.
If it occurs again with something other than Mullvad, it'll be more
obvious that it's a distinct issue.
Updates tailscale/corp#27300
Change-Id: Ie47271f45f2ff28f767578fcca5e6b21731d08a1
Signed-off-by: Alex Chan <alexc@tailscale.com>
When a tsnet.Server dials its own Tailscale IP, TCP SYN packets are
silently dropped. In inject(), outbound packets with dst=self fail the
shouldSendToHost check and fall through to WireGuard, which has no peer
for the node's own address.
Fix this by detecting self-addressed packets in inject() using isLocalIP
and delivering them back into gVisor's network stack as inbound packets
via a new DeliverLoopback method on linkEndpoint. The outbound packet
must be re-serialized into a new PacketBuffer because outbound packets
have their headers parsed into separate views, but DeliverNetworkPacket
expects raw unparsed data.
Updates #18829
Signed-off-by: James Tucker <james@tailscale.com>
derpActiveFunc was being called immediately as a bare goroutine,
before startGate was resolved. For the firstDerp case, startGate
is c.derpStarted which only closes after dc.Connect() completes,
so derpActiveFunc was firing before the DERP connection existed.
We now block it with the same logic used by runDerpReader and by
runDerpWriter.
Updates: #18810
Signed-off-by: Fernando Serboncini <fserb@tailscale.com>
When an exit node has been set and a new default route is added,
create a new rtable in the default rdomain and add the current
default route via its physical interface. When control() is
requesting a connection not go through the exit-node default route,
we can use the SO_RTABLE socket option to force it through the new
rtable we created.
Updates #17321
Signed-off-by: joshua stein <jcs@jcs.org>
Add PacketMatch hooks to the packet filter, allowing extensions to
customize filtering decisions:
- IngressAllowHooks: checked in RunIn after pre() but before the
standard runIn4/runIn6 match rules. Hooks can accept packets to
destinations outside the local IP set. First match wins; the
returned why string is used for logging.
- LinkLocalAllowHooks: checked inside pre() for both ingress and
egress, providing exceptions to the default policy of dropping
link-local unicast packets. First match wins. The GCP DNS address
(169.254.169.254) is always allowed regardless of hooks.
PacketMatch returns (match bool, why string) to provide a log reason
consistent with the existing filter functions.
Hooks are registered via the new FilterHooks struct in ipnext.Hooks
and wired through to filter.Filter in LocalBackend.updateFilterLocked.
Fixestailscale/corp#35989Fixestailscale/corp#37207
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
fixestailscale/corp#36708
Sets up a set of metrics to report watchdog timeouts for wgengine and
reports an event for any watchdog timeout.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Restore synchronous method calls from LocalBackend to magicsock.Conn
for node views, filter, and delta mutations. The eventbus delivery
introduced in 8e6f63cf1 was invalid for these updates because
subsequent operations in the same call chain depend on magicsock
already having the current state. The Synchronize/settleEventBus
workaround was fragile and kept requiring more workarounds and
introducing new mystery bugs.
Since eventbus was added, we've since learned more about when to use
eventbus, and this wasn't one of the cases.
We can take another swing at using eventbus for netmap changes in a
future change.
Fixes#16369
Updates #18575 (likely fixes)
Change-Id: I79057cc9259993368bb1e350ff0e073adf6b9a8f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
app connector packets
We introduce the Conn25PacketHooks interface to be used as a nil-able
field in userspaceEngine. The engine then plumbs through the functions
to the corresponding tstun.Wrapper intercepts.
The new intercepts run pre-filter when egressing toward WireGuard,
and post-filter when ingressing from WireGuard. This is preserve the
design invariant that the filter recognizes the traffic as interesting
app connector traffic.
This commit does not plumb through implementation of the interface, so
should be a functional no-op.
Fixestailscale/corp#35985
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
* wgengine/netstack: add local tailscale service IPs to route and terminate locally
This commit adds the tailscales service IPs served locally to OS routes, and
make interception to packets so that the traffic terminates locally without
making affects to the HA traffics.
Fixestailscale/corp#34048
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* fix test
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* add ready field to avoid accessing lb before netstack starts
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* wgengine/netstack: store values from lb to avoid acquiring a lock
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* add active services to netstack on starts with stored prefs.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* fix comments
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* update comments
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
---------
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
The Tailscale CLI has some methods to watch the IPN bus for
messages, say, the current netmap (`tailscale debug netmap`).
The Tailscale daemon supports this using a streaming HTTP
response. Sometimes, the client can close its connection
abruptly -- due to an interruption, or in the case of `debug netmap`,
intentionally after consuming one message.
If the server daemon is writing a response as the client closes
its end of the socket, the daemon typically encounters a "broken pipe"
error. The "Watch IPN Bus" handler currently logs such errors after
they're propagated by a JSON encoding/writer helper.
Since the Tailscale CLI nominally closes its socket with the daemon
in this slightly ungraceful way (viz. `debug netmap`), stop logging
these broken pipe errors as far as possible. This will help avoid
confounding users when they scan backend logs.
Updates #18477
Signed-off-by: Amal Bansode <amal@tailscale.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
tsnet users can now provide a tun.Device, including any custom
implementation that conforms to the interface.
netstack has a new option CheckLocalTransportEndpoints that when used
alongside a TUN enables netstack listens and dials to correctly capture
traffic associated with those sockets. tsnet with a TUN sets this
option, while all other builds leave this at false to preserve existing
performance.
Updates #18423
Signed-off-by: James Tucker <james@tailscale.com>
When we have not yet communicated with a peer, send a
TSMPDiscoAdvertisement to let the peer know of our disco key. This is in
most cases redundant, but will allow us to set up direct connections
when the client cannot access control.
Some parts taken from: #18073
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Moves magicksock.cloudInfo into util/cloudinfo with minimal changes.
Updates #17796
Change-Id: I83f32473b9180074d5cdbf00fa31e5b3f579f189
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
updates tailscale/corp#33891
Addresses several older the TODO's in netmon. This removes the
Major flag precomputes the ChangeDelta state, rather than making
consumers of ChangeDeltas sort that out themselves. We're also seeing
a lot of ChangeDelta's being flagged as "Major" when they are
not interesting, triggering rebinds in wgengine that are not needed. This
cleans that up and adds a host of additional tests.
The dependencies are cleaned, notably removing dependency on netmon
itself for calculating what is interesting, and what is not. This includes letting
individual platforms set a bespoke global "IsInterestingInterface"
function. This is only used on Darwin.
RebindRequired now roughly follows how "Major" was historically
calculated but includes some additional checks for various
uninteresting events such as changes in interface addresses that
shouldn't trigger a rebind. This significantly reduces thrashing (by
roughly half on Darwin clients which switching between nics). The individual
values that we roll into RebindRequired are also exposed so that
components consuming netmap.ChangeDelta can ask more
targeted questions.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
When receiving a TSMPDiscoAdvertisement from peer, update the discokey
for said peer.
Some parts taken from: https://github.com/tailscale/tailscale/pull/18073/
Updates #12639
Co-authored-by: James Tucker <james@tailscale.com>
When using the resolve.conf file for setting DNS, it is possible that
some other services will trample the file and overwrite our set DNS
server. Experiments has shown this to be a racy error depending on how
quickly processes start.
Make an attempt to trample back the file a limited number of times if
the file is changed.
Updates #16635
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Adds a new types of TSMP messages for advertising disco keys keys
to/from a peer, and implements the advertising triggered by a TSMP ping.
Needed as part of the effort to cache the netmap and still let clients
connect without control being reachable.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Co-authored-by: James Tucker <james@tailscale.com>
Adds the ability to rotate discovery keys on running clients, needed for
testing upcoming disco key distribution changes.
Introduces key.DiscoKey, an atomic container for a disco private key,
public key, and the public key's ShortString, replacing the prior
separate atomic fields.
magicsock.Conn has a new RotateDiscoKey method, and access to this is
provided via localapi and a CLI debug command.
Note that this implementation is primarily for testing as it stands, and
regular use should likely introduce an additional mechanism that allows
the old key to be used for some time, to provide a seamless key rotation
rather than one that invalidates all sessions.
Updates tailscale/corp#34037
Signed-off-by: James Tucker <james@tailscale.com>
The REST API does not return a node name
with a trailing dot, while the internal node name
reported in the netmap does have one.
In order to be consistent with the API,
strip the dot when recording node information.
Updates tailscale/corp#33352
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Pick up a fix for https://pkg.go.dev/vuln/GO-2025-4116 (even though
we're not affected).
Updates #cleanup
Change-Id: I9f2571b17c1f14db58ece8a5a34785805217d9dd
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
It's an unnecessary nuisance having it. We go out of our way to redact
it in so many places when we don't even need it there anyway.
Updates #12639
Change-Id: I5fc72e19e9cf36caeb42cf80ba430873f67167c3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
On the corp tailnet (using Mullvad exit nodes + bunch of expired
devices + subnet routers), these were generating big ~35 KB blobs of
logging regularly.
This logging shouldn't even exist at this level, and should be rate
limited at a higher level, but for now as a bandaid, make it less
spammy.
Updates #cleanup
Change-Id: I0b5e9e6e859f13df5f982cd71cd5af85b73f0c0a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
