... in prep for merging the net/interfaces package into net/netmon.
This is a no-op change that updates a bunch of the API signatures ahead of
a future change to actually move things (and remove the type alias)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I477613388f09389214db0d77ccf24a65bff2199c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves most of the health package global variables to a new
`health.Tracker` type.
But then rather than plumbing the Tracker in tsd.System everywhere,
this only goes halfway and makes one new global Tracker
(`health.Global`) that all the existing callers now use.
A future change will eliminate that global.
Updates #11874
Updates #4136
Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was only obviously unused after the previous change, c39cde79d.
Updates #19334
Change-Id: I9896d5fa692cb4346c070b4a339d0d12340c18f7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were storing server-side lots of:
"Auth":{"Provider":"","LoginName":"","Oauth2Token":null,"AuthKey":""},
That was about 7% of our total storage of pending RegisterRequest
bodies.
Updates tailscale/corp#19327
Change-Id: Ib73842759a2b303ff5fe4c052a76baea0d68ae7d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The initial control client request can get stuck in the event that a
connection is established but then lost part way through, without any
ICMP or RST. Ensure that the control client will be restarted by timing
out that initial request as well.
Fixes#11542
Signed-off-by: James Tucker <james@tailscale.com>
First we had Capabilities []string. Then
https://tailscale.com/blog/acl-grants (#4217) brought CapMap, a
superset of Capabilities. Except we never really finished the
transition inside the codebase to go all-in on CapMap. This does so.
Notably, this coverts Capabilities on the wire early to CapMap
internally so the code can only deal in CapMap, even against an old
control server.
In the process, this removes PeerChange.Capabilities support, which no
known control plane sent anyway. They can and should use
PeerChange.CapMap instead.
Updates #11508
Updates #4217
Change-Id: I872074e226b873f9a578d9603897b831d50b25d9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When node attributes were super rare, the O(n) slice scans looking for
node attributes was more acceptable. But now more code and more users
are using increasingly more node attributes. Time to make it a map.
Noticed while working on tailscale/corp#17879
Updates #cleanup
Change-Id: Ic17c80341f418421002fbceb47490729048756d2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In the recent 20e9f3369 we made HealthChangeRequest machine requests
include a NodeKey, as it was the oddball machine request that didn't
include one. Unfortunately, that code was sometimes being called (at
least in some of our integration tests) without a node key due to its
registration with health.RegisterWatcher(direct.ReportHealthChange).
Fortunately tests in corp caught this before we cut a release. It's
possible this only affects this particular integration test's
environment, but still worth fixing.
Updates tailscale/corp#1297
Change-Id: I84046779955105763dc1be5121c69fec3c138672
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Use the zstdframe package where sensible instead of plumbing
around our own zstd.Encoder just for stateless operations.
This causes logtail to have a dependency on zstd,
but that's arguably okay since zstd support is implicit
to the protocol between a client and the logging service.
Also, virtually every caller to logger.NewLogger was
manually setting up a zstd.Encoder anyways,
meaning that zstd was functionally always a dependency.
Updates #cleanup
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Instead of just checking if a peer capmap is nil, compare the previous
state peer capmap with the new peer capmap.
Updates tailscale/corp#17516
Signed-off-by: Claire Wang <claire@tailscale.com>
This is a useful primitive for asynchronous execution of ordered work I
want to use in another change.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
When auto-update setting in local Prefs is unset, apply the tailnet
default value from control. This only happens once, when we apply the
default (or when the user manually overrides it), tailnet default no
longer affects the node.
Updates #16244
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In prep for making mapSession's lifetime not be 1:1 with a single HTTP
response's lifetime, this moves the inactivity timer watchdog out of
mapSession and into the caller that owns the streaming HTTP response.
(This is admittedly closer to how it was prior to the mapSession type
existing, but that was before we connected some dots which were
impossible to even see before the mapSession type broke the code up.)
Updates #7175
Change-Id: Ia108dac84a4953db41cbd30e73b1de4a2a676c11
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was a really a mutable field owned by mapSession that we didn't move
in earlier commits.
Once moved, it's then possible to de-func-ify the code and turn it into
a regular method rather than an installed optional hook.
Noticed while working to move map session lifetimes out of
Direct.sendMapRequest's single-HTTP-connection scope.
Updates #7175
Updates #cleanup
Change-Id: I6446b15793953d88d1cabf94b5943bb3ccac3ad9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We no longer build Windows releases with cgo enabled, which
automatically turned off certstore support. Rather than re-enabling cgo,
we updated our fork of the certstore package to no longer require cgo.
This updates the package, cleans up how the feature is configured, and
removes the cgo build tag requirement.
Fixestailscale/corp#14797Fixestailscale/coral#118
Change-Id: Iaea34340761c0431d759370532c16a48c0913374
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Thanks to @qur and @eric for debugging!
Fixes#6973
Change-Id: Ib2cf8f030cf595cc73dd061c72e78ac19f5fae5d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol
through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing
IPv6 NAT support to/from peers.
A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-991
Like PeerCapMap, add a field to `tailcfg.Node` which provides
a map of Capability to raw JSON messages which are deferred to be
parsed later by the application code which cares about the specific
capabilities. This effectively allows us to prototype new behavior
without having to commit to a schema in tailcfg, and it also opens up
the possibilities to develop custom behavior in tsnet applications w/o
having to plumb through application specific data in the MapResponse.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Tailscale exit nodes provide DNS service over the peer API, however
IsWireGuardOnly nodes do not have a peer API, and instead need client
DNS parameters passed in their node description.
For Mullvad nodes this will contain the in network 10.64.0.1 address.
Updates #9377
Signed-off-by: James Tucker <james@tailscale.com>
Currently only the top four most popular changes: endpoints, DERP
home, online, and LastSeen.
Updates #1909
Change-Id: I03152da176b2b95232b56acabfb55dcdfaa16b79
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is both more efficient (because the knobs' bool is only updated
whenever Node is changed, rarely) and also gets us one step closer to
removing a case of storing a netmap.NetworkMap in
magicsock. (eventually we want to phase out much of the use of that
type internally)
Updates #1909
Change-Id: I37e81789f94133175064fdc09984e4f3a431f1a1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously two tsnet nodes in the same process couldn't have disjoint
sets of controlknob settings from control as both would overwrite each
other's global variables.
This plumbs a new controlknobs.Knobs type around everywhere and hangs
the knobs sent by control on that instead.
Updates #9351
Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All platforms use it at this point, including iOS which was the
original hold out for memory reasons. No more reason to make it
optional.
Updates #9332
Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We would only check if the client was paused, but not
if the client was closed. This meant that a call to
Shutdown may block forever/leak goroutines
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
resetControlClientLocked is called while b.mu was held and
would call cc.Shutdown which would wait for the observer queue
to drain.
However, there may be active callbacks from cc already waiting for
b.mu resulting in a deadlock.
This makes it so that resetControlClientLocked does not call
Shutdown, and instead just returns the value.
It also makes it so that any status received from previous cc
are ignored.
Updates tailscale/corp#12827
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This eventually allows encoding packages that may respect
the proposed encoding.TextAppender interface.
The performance gains from this is between 10-30%.
Updates tailscale/corp#14379
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
We want the overall state (used only for tests) to be computed from
the individual states of each component, rather than moving the state
around by hand in dozens of places.
In working towards that, we found a lot of things to clean up.
Updates #cleanup
Change-Id: Ieaaae5355dfae789a8ec7a56ce212f1d7e3a92db
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Don't just start goroutines and hope for them to be ordered.
Fixes potential regression from earlier 7074a40c0.
Updates #cleanup
Change-Id: I501a6f3e4e8e6306b958bccdc1e47869991c31f7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We already removed the async API, make it more sync and remove
the FinishLogout state too.
This also makes the callback be synchronous again as the previous
attempt was trying to work around the logout callback resulting
in a client shutdown getting blocked forever.
Updates #3833
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We have cases where the SetControlClientStatus would result in
a Shutdown call back into the auto client that would block
forever. The right thing to do here is to fix the LocalBackend
state machine but thats a different dumpster fire that we
are slowly making progress towards.
This makes it so that the SetControlClientStatus happens in a
different goroutine so that calls back into the auto client
do not block.
Also add a few missing mu.Unlocks in LocalBackend.Start.
Updates #9181
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Then use the Locked variants in Shutdown while we already hold the lock.
Updates #cleanup
Change-Id: I367d53e6be6f37f783c8f43fc9c4d498d0adf501
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Don't depend on the server to do it.
Updates #cleanup
Change-Id: I8ff40b02aa877155a71fd4db58cbecb872241ac8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
They were entirely redundant and 1:1 with the status field
so this turns them into methods instead.
Updates #cleanup
Updates #1909
Change-Id: I7d939750749edf7dae4c97566bbeb99f2f75adbc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I'm trying to remove some stuff from the netmap update path.
Updates #1909
Change-Id: Iad2c728dda160cd52f33ef9cf0b75b4940e0ce64
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
De-pointer a *time.Time type, move it after the mutex which guard is,
rename two test-only methods with our conventional "ForTest" suffix.
Updates #cleanup
Change-Id: I4f4d1acd9c2de33d9c3cb6465d7349ed051aa9f9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For now the method has only one interface (the same as the func it's
replacing) but it will grow, eventually with the goal to remove the
controlclient.Status type for most purposes.
Updates #1909
Change-Id: I715c8bf95e3f5943055a94e76af98d988558a2f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Printing out JSON representation things in log output is pretty common.
Updates #cleanup
Change-Id: Ife2d2e321a18e6e1185efa8b699a23061ac5e5a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So even if the server doesn't support sending patches (neither the
Tailscale control server nor Headscale yet do), this makes the client
convert a changed node to its diff so the diffs can be processed
individually in a follow-up change.
This lets us make progress on #1909 without adding a dependency on
finishing the server-side part, and also means other control servers
will get the same upcoming optimizations.
And add some clientmetrics while here.
Updates #1909
Change-Id: I9533bcb8bba5227e17389f0b10dff71f33ee54ec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was in SelfNode.Hostinfo anyway. The redundant copy was just
costing us an allocation per netmap (a Hostinfo.Clone).
Updates #1909
Change-Id: Ifac568aa5f8054d9419828489442a0f4559bc099
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now mapSession has a bunch more fields and methods, rather than being
just one massive func with a ton of local variables.
So far there are no major new optimizations, though. It should behave
the same as before.
This has been done with an eye towards testability (so tests can set
all the callback funcs as needed, or not, without a huge Direct client
or long-running HTTP requests), but this change doesn't add new tests
yet. That will follow in the changes which flesh out the NetmapUpdater
interface.
Updates #1909
Change-Id: Iad4e7442d5bbbe2614bd4b1dc4b02e27504898df
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And optimize the Persist setting a bit, allocating later and only mutating
fields when there's been a Node change.
Updates #1909
Change-Id: Iaddfd9e88ef76e1d18e8d0a41926eb44d0955312
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In b987b2ab18 (2021-01-12) when we introduced sharing we mapped
the sharer to the userid at a low layer, mostly to fix the display of
"tailscale status" and the client UIs, but also some tests.
The commit earlier today, 7dec09d169, removed the 2.5yo option
to let clients disable that automatic mapping, as clearly we were never
getting around to it.
This plumbs the Sharer UserID all the way to ipnstatus so the CLI
itself can choose to print out the Sharer's identity over the node's
original owner.
Then we stop mangling Node.User and let clients decide how they want
to render things.
To ease the migration for the Windows GUI (which currently operates on
tailcfg.Node via the NetMap from WatchIPNBus, instead of PeerStatus),
a new method Node.SharerOrUser is added to do the mapping of
Sharer-else-User.
Updates #1909
Updates tailscale/corp#1183
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was added 2.5 years ago in c1dabd9436 but was never used.
Clearly that migration didn't matter.
We can attempt this again later if/when this matters.
Meanwhile this simplifies the code and thus makes working on other
current efforts in these parts of the code easier.
Updates #1909
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now a nodeAttr: ForceBackgroundSTUN, DERPRoute, TrimWGConfig,
DisableSubnetsIfPAC, DisableUPnP.
Kept support for, but also now a NodeAttr: RandomizeClientPort.
Removed: SetForceBackgroundSTUN, SetRandomizeClientPort (both never
used, sadly... never got around to them. But nodeAttrs are better
anyway), EnableSilentDisco (will be a nodeAttr later when that effort
resumes).
Updates #8923
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
No need to have it on Auto or be behind a mutex; it's only read/written
from a single goroutine. Move it there.
Updates tailscale/corp#5761
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
See issue. This is a baby step towards passing through deltas
end-to-end from node to control back to node and down to the various
engine subsystems, not computing diffs from two full netmaps at
various levels. This will then let us support larger netmaps without
burning CPU.
But this change itself changes no behavior. It just changes a func
type to an interface with one method. That paves the way for future
changes to then add new NetmapUpdater methods that do more
fine-grained work than updating the whole world.
Updates #1909
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The read of the synced field for logging takes place outside the lock, and
races with other (locked) writes of this field, including for example the one
at current line 556 in mapRoutine.
Updates tailscale/corp#13856
Change-Id: I056b36d7a93025aafdf73528dd7645f10b791af6
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Instead of having updates replace the map polls, create
a third goroutine which is solely responsible for making
sure that control is aware of the latest client state.
This also makes it so that the streaming map polls are only
broken when there are auth changes, or the client is paused.
Updates tailscale/corp#5761
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was being modified in two places in Direct for the auth routine
and then in LocalBackend when a new NetMap was received. This was
confusing, so make Direct also own changes to Persist when a new
NetMap is received.
Updates #7726
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds the capability to pad disco ping message payloads to reach a
specified size. It also plumbs it through to the tailscale ping -size
flag.
Disco pings used for actual endpoint discovery do not use this yet.
Updates #311.
Signed-off-by: salman <salman@tailscale.com>
Co-authored-by: Val <valerie@tailscale.com>
We were never resetting the backoff in streaming mapResponses.
The call to `PollNetMap` always returns with an error. Changing that contract
is harder, so manually reset backoff when a netmap is received.
Updates tailscale/corp#12894
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This allows providing additional information to the client about how to
select a home DERP region, such as preferring a given DERP region over
all others.
Updates #8603
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I7c4a270f31d8585112fab5408799ffba5b75266f
Without this, the client would just get stuck dialing even if the
context was canceled.
Updates tailscale/corp#12590
Signed-off-by: Maisem Ali <maisem@tailscale.com>
ScrubbedGoroutineDump previously only returned the stacks of all
goroutines. I also want to be able to use this for only the current
goroutine's stack. Add a bool param to support both ways.
Updates tailscale/corp#5149
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This passes the *dnscache.Resolver down from the Direct client into the
Noise client and from there into the controlhttp client. This retains
the Resolver so that it can share state across calls instead of creating
a new resolver.
Updates #4845
Updates #6110
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ia5d6af1870f3b5b5d7dd5685d775dcf300aec7af
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
