Recently, the golangci-lint workflow has been taking longer and longer
to complete, causing it to timeout after the default of 5 minutes.
Running error: context loading failed: failed to load packages: failed to load packages: failed to load with go/packages: context deadline exceeded
Timeout exceeded: try increasing it by passing --timeout option
This PR upgrades actions/setup-go to version 6, the latest, and
enables caching for Go modules and build outputs. This should speed up
linting because most packages won’t have to be downloaded over and
over again.
Fixes#18366
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Fixes a bug where, for kube HA proxies, TLS certs for the replica
responsible for cert issuance where loaded in memory on startup,
although the in-memory store was not updated after renewal (to
avoid failing re-issuance for re-created Ingresses).
Now the 'write' replica always reads certs from the kube Secret.
Updates tailscale/tailscale#18394
Signed-off-by: Irbe Krumina <irbekrm@gmail.com>
Previously the funnel listener would leave artifacts in the serve
config. This caused weird out-of-sync effects like the admin panel
showing that funnel was enabled for a node, but the node rejecting
packets because the listener was closed.
This change resolves these synchronization issues by ensuring that
funnel listeners clean up the serve config when closed.
See also:
e109cf9fdd
Updates #cleanup
Signed-off-by: Harry Harpham <harry@tailscale.com>
Prior to this change, we were resetting the tsnet's serve config every
time tsnet.Server.Up was run. This is important to do on startup, to
prevent messy interactions with stale configuration when the code has
changed.
However, Up is frequently run as a just-in-case step (for example, by
Server.ListenTLS/ListenFunnel and possibly by consumers of tsnet). When
the serve config is reset on each of these calls to Up, this creates
situations in which the serve config disappears unexpectedly. The
solution is to reset the serve config only on the first call to Up.
Fixes#8800
Updates tailscale/corp#27200
Signed-off-by: Harry Harpham <harry@tailscale.com>
Add support for authenticating the gitops-pusher using workload identity
federation.
Updates https://github.com/tailscale/corp/issues/34172
Signed-off-by: Mario Minardi <mario@tailscale.com>
QR codes are used by `tailscale up --qr` to provide an easy way to
open a web-page without transcribing a difficult URI. However, there’s
no need for this feature if the client will never be called
interactively. So this PR adds the `ts_omit_qrcodes` build tag.
Updates #18182
Signed-off-by: Simon Law <sfllaw@tailscale.com>
It's not worth adding the v2 client just for these e2e tests. Remove
that dependency for now to keep a clear separation, but we should revive
the v2 client version if we ever decide to take that dependency for the
tailscale/tailscale repo as a whole.
Updates tailscale/corp#32085
Change-Id: Ic51ce233d5f14ce2d25f31a6c4bb9cf545057dd0
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
* cmd/k8s-operator/e2e: run self-contained e2e tests with devcontrol
Adds orchestration for more of the e2e testing setup requirements to
make it easier to run them in CI, but also run them locally in a way
that's consistent with CI. Requires running devcontrol, but otherwise
supports creating all the scaffolding required to exercise the operator
and proxies.
Updates tailscale/corp#32085
Change-Id: Ia7bff38af3801fd141ad17452aa5a68b7e724ca6
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
* cmd/k8s-operator/e2e: being more specific on tmp dir cleanup
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
---------
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Co-authored-by: chaosinthecrd <tom@tmlabs.co.uk>
Raw Linux consoles support UTF-8, but we cannot assume that all UTF-8
characters are available. The default Fixed and Terminus fonts don’t
contain half-block characters (`▀` and `▄`), but do contain the
full-block character (`█`).
Sometimes, Linux doesn’t have a framebuffer, so it falls back to VGA.
When this happens, the full-block character could be anywhere in
extended ASCII block, because we don’t know which code page is active.
This PR introduces `--qr-format=auto` which tries to heuristically
detect when Tailscale is printing to a raw Linux console, whether
UTF-8 is enabled, and which block characters have been mapped in the
console font.
If Unicode characters are unavailable, the new `--qr-format=ascii`
formatter uses `#` characters instead of full-block characters.
Fixes#12935
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Moves magicksock.cloudInfo into util/cloudinfo with minimal changes.
Updates #17796
Change-Id: I83f32473b9180074d5cdbf00fa31e5b3f579f189
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
Bump peter-evans/create-pull-request to 8.0.0 to ensure compatibility
with actions/checkout 6.x.
Updates #cleanup
Signed-off-by: Mario Minardi <mario@tailscale.com>
The funnel command is sort of an alias for the serve command. This means
that the subcommands added to serve to support Services appear as
subcommands for funnel as well, despite having no meaning for funnel.
This change removes all such Services-specific subcommands from funnel.
Fixestailscale/corp#34167
Signed-off-by: Harry Harpham <harry@tailscale.com>
Ensure that hardware attestation keys are not added to tailscaled
state stores that are Kubernetes Secrets or AWS SSM as those Tailscale
devices should be able to be recreated on different nodes, for example,
when moving Pods between nodes.
Updates tailscale/tailscale#18302
Signed-off-by: Irbe Krumina <irbekrm@gmail.com>
TPM-based features have been incredibly painful due to the heterogeneous
devices in the wild, and many situations in which the TPM "changes" (is
reset or replaced). All of this leads to a lot of customer issues.
We hoped to iron out all the kinks and get all users to benefit from
state encryption and hardware attestation without manually opting in,
but the long tail of kinks is just too long.
This change disables TPM-based features on Windows and Linux by default.
Node state should get auto-decrypted on update, and old attestation keys
will be removed.
There's also tailscaled-on-macOS, but it won't have a TPM or Keychain
bindings anyway.
Updates #18302
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Soft-fail on initial unmarshal and try again, ignoring the
AttestationKey. This helps in cases where something about the
attestation key storage (usually a TPM) is messed up. The old key will
be lost, but at least the node can start again.
Updates #18302
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Send LOGIN audit messages to the kernel audit subsystem on Linux
when users successfully authenticate to Tailscale SSH. This provides
administrators with audit trail integration via auditd or journald,
recording details about both the Tailscale user (whois) and the
mapped local user account.
The implementation uses raw netlink sockets to send AUDIT_USER_LOGIN
messages to the kernel audit subsystem. It requires CAP_AUDIT_WRITE
capability, which is checked at runtime. If the capability is not
present, audit logging is silently skipped.
Audit messages are sent to the kernel (pid 0) and consumed by either
auditd (written to /var/log/audit/audit.log) or journald (available
via journalctl _TRANSPORT=audit), depending on system configuration.
Note: This may result in duplicate messages on a system where
auditd/journald audit logs are enabled and the system has and supports
`login -h`. Sadly Linux login code paths are still an inconsistent wild
west so we accept the potential duplication rather than trying to avoid
it.
Fixes#18332
Signed-off-by: James Tucker <james@tailscale.com>
GCP Certificate Manager requires an email contact on ACME accounts.
Add --acme-email flag that is required for --certmode=gcp and
optional for --certmode=letsencrypt.
Fixes#18277
Signed-off-by: Raj Singh <raj@tailscale.com>
An error returned by net.Listener.Accept() causes the owning http.Server to shut down.
With the deprecation of net.Error.Temporary(), there's no way for the http.Server to test
whether the returned error is temporary / retryable or not (see golang/go#66252).
Because of that, errors returned by (*safesocket.winIOPipeListener).Accept() cause the LocalAPI
server (aka ipnserver.Server) to shut down, and tailscaled process to exit.
While this might be acceptable in the case of non-recoverable errors, such as programmer errors,
we shouldn't shut down the entire tailscaled process for client- or connection-specific errors,
such as when we couldn't obtain the client's access token because the client attempts to connect
at the Anonymous impersonation level. Instead, the LocalAPI server should gracefully handle
these errors by denying access and returning a 401 Unauthorized to the client.
In tailscale/tscert#15, we fixed a known bug where Caddy and other apps using tscert would attempt
to connect at the Anonymous impersonation level and fail. However, we should also fix this on the tailscaled
side to prevent a potential DoS, where a local app could deliberately open the Tailscale LocalAPI named pipe
at the Anonymous impersonation level and cause tailscaled to exit.
In this PR, we defer token retrieval until (*WindowsClientConn).Token() is called and propagate the returned token
or error via ipnauth.GetConnIdentity() to ipnserver, which handles it the same way as other ipnauth-related errors.
Fixes#18212Fixestailscale/tscert#13
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This gauge will be reworked to include endpoint state in future.
Updates tailscale/corp#30820
Change-Id: I66f349d89422b46eec4ecbaf1a99ad656c7301f9
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
In dynamically changing environments where ACME account keys and certs
are stored separately, it can happen that the account key would get
deleted (and recreated) between issuances. If that is the case,
we currently fail renewals and the only way to recover is for users
to delete certs.
This adds a config knob to allow opting out of the replaces extension
and utilizes it in the Kubernetes operator where there are known
user workflows that could end up with this edge case.
Updates #18251
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Adding both user and client metrics for peer relay forwarded bytes and
packets, and the total endpoints gauge.
User metrics:
tailscaled_peer_relay_forwarded_packets_total{transport_in, transport_out}
tailscaled_peer_relay_forwarded_bytes_total{transport_in, transport_out}
tailscaled_peer_relay_endpoints_total{}
Where the transport labels can be of "udp4" or "udp6".
Client metrics:
udprelay_forwarded_(packets|bytes)_udp(4|6)_udp(4|6)
udprelay_endpoints
RELNOTE: Expose tailscaled metrics for peer relay.
Updates tailscale/corp#30820
Change-Id: I1a905d15bdc5ee84e28017e0b93210e2d9660259
Signed-off-by: Alex Valiushko <alexvaliushko@tailscale.com>
Adds support for targeting FQDNs that are a Tailscale Service. Uses the
same method of searching for Services as the tailscale configure
kubeconfig command. This fixes using the tailscale.com/tailnet-fqdn
annotation for Kubernetes Service when the specified FQDN is a Tailscale
Service.
Fixes#16534
Change-Id: I422795de76dc83ae30e7e757bc4fbd8eec21cc64
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Signed-off-by: Becky Pauley <becky@tailscale.com>
IsZero is required by the interface, so we should use that before trying
to serialize the key.
Updates #35412
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
When the TS_DEBUG_DNS_FORWARD_SEND envknob is turned on, also log the
source IP:port of the query that tailscaled is forwarding.
Updates tailscale/corp#35374
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
updates tailscale/corp#33891
Addresses several older the TODO's in netmon. This removes the
Major flag precomputes the ChangeDelta state, rather than making
consumers of ChangeDeltas sort that out themselves. We're also seeing
a lot of ChangeDelta's being flagged as "Major" when they are
not interesting, triggering rebinds in wgengine that are not needed. This
cleans that up and adds a host of additional tests.
The dependencies are cleaned, notably removing dependency on netmon
itself for calculating what is interesting, and what is not. This includes letting
individual platforms set a bespoke global "IsInterestingInterface"
function. This is only used on Darwin.
RebindRequired now roughly follows how "Major" was historically
calculated but includes some additional checks for various
uninteresting events such as changes in interface addresses that
shouldn't trigger a rebind. This significantly reduces thrashing (by
roughly half on Darwin clients which switching between nics). The individual
values that we roll into RebindRequired are also exposed so that
components consuming netmap.ChangeDelta can ask more
targeted questions.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
The existing client metric methods only support incrementing (or
decrementing) a delta value. This new method allows setting the metric
to a specific value.
Updates tailscale/corp#35327
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
This commit also introduces a sync.Mutex for guarding mutatable fields
on serverEndpoint, now that it is no longer guarded by the sync.Mutex
in Server.
These changes reduce lock contention and by effect increase aggregate
throughput under high flow count load. A benchmark on Linux with AWS
c8gn instances showed a ~30% increase in aggregate throughput (37Gb/s
vs 28Gb/s) for 12 tailscaled flows.
Updates tailscale/corp#35264
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Add flags:
* --cigocached-host to support alternative host resolution in other
environments, like the corp repo.
* --stats to reduce the amount of bash script we need.
* --version to support a caching tool/cigocacher script that will
download from GitHub releases.
Updates tailscale/corp#10808
Change-Id: Ib2447bc5f79058669a70f2c49cef6aedd7afc049
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
