LocalBackend stores loginFlags at construction so that per-instance
properties (e.g. LoginEphemeral set by tsnet.Server.Ephemeral) persist
for the session. StartLoginInteractiveAs already merges b.loginFlags
into its cc.Login call, but the two auto-login call sites pass bare
controlclient.LoginDefault, silently dropping any stored flags.
Merge b.loginFlags at both auto-login call sites to match the existing
StartLoginInteractiveAs pattern. LoginDefault is zero so this is a
no-op when loginFlags is empty, and restores the documented behavior
when it isn't.
Fixes#15852
Signed-off-by: Scott Graham <scott.github@h4ck3r.net>
For debugging purposes, unstable builds will sometimes intentionally panic for
unexpected behaviours. We observed such a panic after loading a cached netmap,
but because we had a valid cached map, the client was unable to recover on its
own and the operator had to manually reset the cache.
As a defensive hedge, when netmap caching is enabled, check for a panic during
installation of a net network map: If one occurs, discard any cached netmaps
before letting the panic unwind, so that we do not lose the panic itself, but
reduce the need for manual intervention.
Updates #12639
Updates tailscale/corp#27300
Change-Id: I0436889c6bdc2fa728c9cb83630cd7b00a72ce68
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Clients with the newly added node attribute
`"disable-linux-cgnat-drop-rule"` will not automatically drop inbound
traffic on non-Tailscale network interfaces with the source IP in the
CGNAT IP range. This is an initial proof-of-concept for enabling
connectivity with off-Tailnet CGNAT endpoints.
Fixestailscale/corp#36270.
Signed-off-by: Naman Sood <mail@nsood.in>
ipn/local: add netmap mutations to the ipn bus
updates tailscale/tailscale#1909
This adds a new new NotifyWatchOpt that allows watchers to
receive PeerChange events (derived from node mutations)
on the IPN bus in lieu of a complete netmap. We'll continue
to send the full netmap for any map response that includes it,
but for mutations, sending PeerChange events gives the client
the option to manage it's own models more selectively and cuts
way down on json serialization overhead.
On chatty tailnets, this will vastly reduce the amount of
chatter on the bus.
This change should be backwards compatible, it is
purely additive. Clients that subscribe to NotifyNetmap will
get the full netmap for every delta. New clients can
omit that and instead opt into NotifyPeerChanges.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Add ExtraRootCAs *x509.CertPool to tsd.System and plumb it through
the control client, noise transport, DERP, and wgengine layers so
that platforms like Android can inject user-installed CA certificates
into Go's TLS verification.
tlsdial.Config now honors base.RootCAs as additional trusted roots,
tried after system roots and before the baked-in LetsEncrypt fallback.
SetConfigExpectedCert gets the same treatment for domain-fronted DERP.
The Android client will set sys.ExtraRootCAs with a pool built from
x509.SystemCertPool + user-installed certs obtained via the Android
KeyStore API, replacing the current SSL_CERT_DIR environment variable
approach.
Updates #8085
Change-Id: Iecce0fd140cd5aa0331b124e55a7045e24d8e0c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Investigating battery costs on a busy tailnet I noticed a large number
of nodes regularly reconnecting to control and DERP. In one case I was
able to analyze closely `pmset` reported the every-minute wake-ups being
triggered by bluetooth. The node was by side effect reconnecting to
control constantly, and this was at times visible to peers as well.
Three changes here improve the situation:
- Short time jumps (less than 10 minutes) no longer produce "major
network change" events, and so do not trigger full rebind/reconnect.
- Many "incidental" fields on interfaces are ignored, like MTU, flags
and so on - if the route is still good, the rest should be manageable.
- Additional log output will provide more detail about the cause of
major network change events.
Updates #3363
Signed-off-by: James Tucker <james@tailscale.com>
Add a new tailcfg.NodeCapability (NodeAttrCacheNetworkMaps) to control whether
a node with support for caching network maps will attempt to do so. Update the
capability version to reflect this change (mainly as a safety measure, as the
control plane does not currently need to know about it).
Use the presence (or absence) of the node attribute to decide whether to create
and update a netmap cache for each profile. If caching is disabled, discard the
cached data; this allows us to use the presence of a cached netmap as an
indicator it should be used (unless explicitly overridden). Add a test that
verifies the attribute is respected. Reverse the sense of the environment knob
to be true by default, with an override to disable caching at the client
regardless what the node attribute says.
Move the creation/update of the netmap cache (when enabled) until after
successfully applying the network map, to reduce the possibility that we will
cache (and thus reuse after a restart) a network map that fails to correctly
configure the client.
Updates #12639
Change-Id: I1df4dd791fdb485c6472a9f741037db6ed20c47e
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Without this, any test relying on underlying use of magicsock will fail
without network connectivity, even when the test logic has no need for a
network connection. Tests currently in this bucket include many in
tstest/integration and in tsnet.
Further explanation:
ipn only becomes Running when it sees at least one live peer or DERP
connection:
0cc1b2ff76/ipn/ipnlocal/local.go (L5861-L5866)
When tests only use a single node, they will never see a peer, so the
node has to wait to see a DERP server.
magicsock sets the preferred DERP server in updateNetInfo(), but this
function returns early if the network is down.
0cc1b2ff76/wgengine/magicsock/magicsock.go (L1053-L1106)
Because we're checking the real network, this prevents ipn from entering
"Running" and causes the test to fail or hang.
In tests, we can assume the network is up unless we're explicitly testing
the behaviour of tailscaled when the network is down. We do something similar
in magicsock/derp.go, where we assume we're connected to control unless
explicitly testing otherwise:
7d2101f352/wgengine/magicsock/derp.go (L166-L177)
This is the template for the changes to `networkDown()`.
Fixes#17122
Co-authored-by: Alex Chan <alexc@tailscale.com>
Signed-off-by: Harry Harpham <harry@tailscale.com>
When disco keys are learned on a node that is connected to control and
has a mapSession, wgengine will see the key as having changed, and
assume that any existing connections will need to be reset.
For keys learned via TSMP, the connection should not be reset as that
key is learned via an active wireguard connection. If wgengine resets
that connetion, a 15s timeout will occur.
This change adds a map to track new keys coming in via TSMP, and removes
them from the list of keys that needs to trigger wireguard resets. This
is done with an interface chain from controlclient down via localBackend
to userspaceEngine via the watchdog.
Once a key has been actively used for preventing a wireguard reset, the
key is removed from the map.
If mapSession becomes a long lived process instead of being dependent on
having a connection to control. This interface chain can be removed, and
the event sequence from wrap->controlClient->userspaceEngine, can be
changed to wrap->userspaceEngine->controlClient as we know the map will
not be gunked up with stale TSMP entries.
Updates #12639
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
* ipn/ipnlocal: warn incompatibility between no-snat-routes and exitnode
This commit adds a warning to health check when the --snat-subnet-routes=false flag for subnet router is
set alone side --advertise-exit-node=true. These two would conflict with each other and result internet-bound
traffic from peers using this exit node no masqueraded to the node's source IP and fail to route return
packets back. The described combination is not valid until we figure out a way to separate exitnode masquerade rule and skip it for subnet routes.
Updates #18725
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* use date instead of for now to clarify effectivness
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
---------
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
conn25 needs to add routes to the operating system to direct handling
of the addresses in the magic IP range to the tailscale0 TUN and
tailscaled.
The way we do this for exit nodes and VIP services is that we add routes
to the Routes field of router.Config, and then the config is passed to
the WireGuard engine Reconfig.
conn25 is implemented as an ipnext.Extension and so this commit adds a
hook to ipnext.Hooks to allow any extension to provide routes to the
config. The hook if provided is called in routerConfigLocked, similarly
to exit nodes and VIP services.
Fixestailscale/corp#38123
Signed-off-by: Fran Bull <fran@tailscale.com>
If AutoUpdate.Check is false, the client has opted out of checking for updates, so we shouldn't broadcast ClientVersion. If the client has opted in, it should be included in the initial Notify.
Updates tailscale/corp#32629
Signed-off-by: kari-ts <kari@tailscale.com>
Also implement a limit of one on the number of goroutines that can be
waiting to do a reconfig via AuthReconfig, to prevent extensions from
calling too fast and taxing resources.
Even with the protection, the new method should only be used in
experimental or proof-of-concept contexts. The current intended use is
for an extension to be able force a reconfiguration of WireGuard, and
have the reconfiguration call back into the extension for extra Allowed
IPs.
If in the future if WireGuard is able to reconfigure individual peers more
dynamically, an extension might be able to hook into that process, and
this method on ipnext.Host may be deprecated.
Fixestailscale/corp#38120
Updates tailscale/corp#38124
Updates tailscale/corp#38125
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
* ipn: reject advertised routes with non-address bits set
The config file path, EditPrefs local API, and App Connector API were
accepting invalid subnet route prefixes with non-address bits set (e.g.,
2a01:4f9:c010:c015::1/64 instead of 2a01:4f9:c010:c015::/64). All three
paths now reject prefixes where prefix != prefix.Masked() with an error
message indicating the expected masked form.
Updates tailscale/corp#36738
Signed-off-by: Brendan Creane <bcreane@gmail.com>
* address review comments
Signed-off-by: Brendan Creane <bcreane@gmail.com>
---------
Signed-off-by: Brendan Creane <bcreane@gmail.com>
This populates UserProfile.Groups in the WhoIs response from the
local backend with the groups of the corresponding user in the
netmap.
This allows tsnet apps to see (and e.g. forward) which groups a
user making a request belongs to - as long as the tsnet app runs
on a node that been granted the tailscale.com/visible-groups
capability via node attributes. If that's not the case or the
user doesn't belong to any groups allow-listed via the node
attribute, Groups won't be populated.
Updates tailscale/corp#31529
Signed-off-by: Gesa Stupperich <gesa@tailscale.com>
Currently IP forwarding health check is done on sending MapRequests.
Move ip forwarding to the health service to gain the benefits
of the health tracker and perodic monitoring out of band from
the MapRequest path. ipnlocal now provides a closure to
the health service to provide the check if forwarding is broken.
Removed `skipIPForwardingCheck` from controlclient/direct.go,
it wasn't being used as the comments describe it, that check
has moved to ipnlocal for the closure to the health tracker.
Updates #18976
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
After switching from cellular to wifi without ipv6, ForeachInterface still sees rmnet prefixes, so HaveV6 stays true, and magicsock keeps attempting ipv6 connections that either route through cellular or time out for users on wifi without ipv6
This:
-Adds SetAndroidBindToNetworkFunc, a callback to bind the socket to the selected Android Network object
Updates tailscale/tailscale#6152
Signed-off-by: kari-ts <kari@tailscale.com>
This makes tsnet apps not depend on x/crypto/ssh and locks that in with a test.
It also paves the wave for tsnet apps to opt-in to SSH support via a
blank feature import in the future.
Updates #12614
Change-Id: Ica85628f89c8f015413b074f5001b82b27c953a9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change reintroduces UserProfile.Groups, a slice that contains
the ACL-defined and synced groups that a user is a member of.
The slice will only be non-nil for clients with the node attribute
see-groups, and will only contain groups that the client is allowed
to see as per the app payload of the see-groups node attribute.
For example:
```
"nodeAttrs": [
{
"target": ["tag:dev"],
"app": {
"tailscale.com/see-groups": [{"groups": ["group:dev"]}]
}
},
[...]
]
```
UserProfile.Groups will also be gated by a feature flag for the time
being.
Updates tailscale/corp#31529
Signed-off-by: Gesa Stupperich <gesa@tailscale.com>
I omitted a lot of the min/max modernizers because they didn't
result in more clear code.
Some of it's older "for x := range 123".
Also: errors.AsType, any, fmt.Appendf, etc.
Updates #18682
Change-Id: I83a451577f33877f962766a5b65ce86f7696471c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This hook addition is motivated by the Connectors 2025 work, in which
NATed "Transit IPs" are used to route interesting traffic to the
appropriate peer, without advertising the actual real IPs.
It overlaps with #17858, and specifically with the WIP PR #17861.
If that work completes, this hook may be replaced by other ones
that fit the new WireGuard configuration paradigm.
Fixestailscale/corp#37146
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
We use the TS_USE_CACHED_NETMAP knob to condition loading a cached netmap, but
were hitherto writing the map out to disk even when it was disabled. Let's not
do that; the two should travel together.
Updates #12639
Change-Id: Iee5aa828e2c59937d5b95093ea1ac26c9536721e
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
PR #18860 adds firewall rules in the mangle table to save outbound packet
marks to conntrack and restore them on reply packets before the routing
decision. When reply packets have their marks restored, the kernel uses
the correct routing table (based on the mark) and the packets pass the
rp_filter check.
This makes the risk check and reverse path filtering warnings unnecessary.
Updates #3310Fixestailscale/corp#37846
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
When an exit node has been set and a new default route is added,
create a new rtable in the default rdomain and add the current
default route via its physical interface. When control() is
requesting a connection not go through the exit-node default route,
we can use the SO_RTABLE socket option to force it through the new
rtable we created.
Updates #17321
Signed-off-by: joshua stein <jcs@jcs.org>
Add PacketMatch hooks to the packet filter, allowing extensions to
customize filtering decisions:
- IngressAllowHooks: checked in RunIn after pre() but before the
standard runIn4/runIn6 match rules. Hooks can accept packets to
destinations outside the local IP set. First match wins; the
returned why string is used for logging.
- LinkLocalAllowHooks: checked inside pre() for both ingress and
egress, providing exceptions to the default policy of dropping
link-local unicast packets. First match wins. The GCP DNS address
(169.254.169.254) is always allowed regardless of hooks.
PacketMatch returns (match bool, why string) to provide a log reason
consistent with the existing filter functions.
Hooks are registered via the new FilterHooks struct in ipnext.Hooks
and wired through to filter.Filter in LocalBackend.updateFilterLocked.
Fixestailscale/corp#35989Fixestailscale/corp#37207
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Signed-off-by: Michael Ben-Ami <mzb@tailscale.com>
This commit is based on ff0978ab, and extends #18497 to connect network map
caching to the LocalBackend. As implemented, only "whole" netmap values are
stored, and we do not yet handle incremental updates. As-written, the feature must
be explicitly enabled via the TS_USE_CACHED_NETMAP envknob, and must be
considered experimental.
Updates #12639
Co-Authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I48a1e92facfbf7fb3a8e67cff7f2c9ab4ed62c83
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
In PR #18681, we started logging which exit nodes were being
suggested. However, we did not log if there were errors encountered.
This patch corrects this oversight.
Updates: tailscale/corp#29964
Updates: tailscale/corp#36446
Signed-off-by: Simon Law <sfllaw@tailscale.com>
When traffic steering is enabled, some users are suggested an exit
node that is inappropriately far from their location. This seems to
happen right when the client connects to the control plane and the
client eventually fixes itself. But whenever an affected client
reconnects, its suggested exit node flaps, and this happens often
enough to be noticeable because connections drop whenever the exit
node is switched. This should not happen, since the map response that
contains the list of suggested exit nodes that the client picks from,
also contains the scores for those nodes.
Since our current logging and diagnostic tools don’t give us enough
insight into what is happening, this PR adds additional logging when:
- traffic steering scores are used to suggest an exit node
- an exit node is suggested, no matter how it was determined
Updates: tailscale/corp#29964
Updates: tailscale/corp#36446
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Restore synchronous method calls from LocalBackend to magicsock.Conn
for node views, filter, and delta mutations. The eventbus delivery
introduced in 8e6f63cf1 was invalid for these updates because
subsequent operations in the same call chain depend on magicsock
already having the current state. The Synchronize/settleEventBus
workaround was fragile and kept requiring more workarounds and
introducing new mystery bugs.
Since eventbus was added, we've since learned more about when to use
eventbus, and this wasn't one of the cases.
We can take another swing at using eventbus for netmap changes in a
future change.
Fixes#16369
Updates #18575 (likely fixes)
Change-Id: I79057cc9259993368bb1e350ff0e073adf6b9a8f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit adds a bool named PeerRelay to Hostinfo, to identify the host's status of acting as a peer relay.
Considering the RelayServerPort number can be 0, I just made this a bool in stead of a port number. If the port
info is needed in future this would also help indicating if the port was set to 0 (meaning any port in peer relay
context).
Updates tailscale/corp#35862
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
If any profiles exist and an Authkey is provided via syspolicy, the
AuthKey is ignored on backend start, preventing re-auth attempts. This
is useful for one-time device provisioning scenarios, skipping authKey
use after initial setup when the authKey may no longer be valid.
updates #18618
Signed-off-by: Will Hannah <willh@tailscale.com>
* wgengine/netstack: add local tailscale service IPs to route and terminate locally
This commit adds the tailscales service IPs served locally to OS routes, and
make interception to packets so that the traffic terminates locally without
making affects to the HA traffics.
Fixestailscale/corp#34048
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* fix test
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* add ready field to avoid accessing lb before netstack starts
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* wgengine/netstack: store values from lb to avoid acquiring a lock
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* add active services to netstack on starts with stored prefs.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* fix comments
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* update comments
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
---------
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
This file was never truly necessary and has never actually been used in
the history of Tailscale's open source releases.
A Brief History of AUTHORS files
---
The AUTHORS file was a pattern developed at Google, originally for
Chromium, then adopted by Go and a bunch of other projects. The problem
was that Chromium originally had a copyright line only recognizing
Google as the copyright holder. Because Google (and most open source
projects) do not require copyright assignemnt for contributions, each
contributor maintains their copyright. Some large corporate contributors
then tried to add their own name to the copyright line in the LICENSE
file or in file headers. This quickly becomes unwieldy, and puts a
tremendous burden on anyone building on top of Chromium, since the
license requires that they keep all copyright lines intact.
The compromise was to create an AUTHORS file that would list all of the
copyright holders. The LICENSE file and source file headers would then
include that list by reference, listing the copyright holder as "The
Chromium Authors".
This also become cumbersome to simply keep the file up to date with a
high rate of new contributors. Plus it's not always obvious who the
copyright holder is. Sometimes it is the individual making the
contribution, but many times it may be their employer. There is no way
for the proejct maintainer to know.
Eventually, Google changed their policy to no longer recommend trying to
keep the AUTHORS file up to date proactively, and instead to only add to
it when requested: https://opensource.google/docs/releasing/authors.
They are also clear that:
> Adding contributors to the AUTHORS file is entirely within the
> project's discretion and has no implications for copyright ownership.
It was primarily added to appease a small number of large contributors
that insisted that they be recognized as copyright holders (which was
entirely their right to do). But it's not truly necessary, and not even
the most accurate way of identifying contributors and/or copyright
holders.
In practice, we've never added anyone to our AUTHORS file. It only lists
Tailscale, so it's not really serving any purpose. It also causes
confusion because Tailscalars put the "Tailscale Inc & AUTHORS" header
in other open source repos which don't actually have an AUTHORS file, so
it's ambiguous what that means.
Instead, we just acknowledge that the contributors to Tailscale (whoever
they are) are copyright holders for their individual contributions. We
also have the benefit of using the DCO (developercertificate.org) which
provides some additional certification of their right to make the
contribution.
The source file changes were purely mechanical with:
git ls-files | xargs sed -i -e 's/\(Tailscale Inc &\) AUTHORS/\1 contributors/g'
Updates #cleanup
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
In order to better manage per-profile data resources on the client, add methods
to the LocalBackend to support creation of per-profile directory structures in
local storage. These methods build on the existing TailscaleVarRoot config, and
have the same limitation (i.e., if no local storage is available, it will
report an error when used).
The immediate motivation is to support netmap caching, but we can also use this
mechanism for other per-profile resources including pending taildrop files and
Tailnet Lock authority caches.
This commit only adds the directory-management plumbing; later commits will
handle migrating taildrop, TKA, etc. to this mechanism, as well as caching
network maps.
Updates #12639
Change-Id: Ia75741955c7bf885e49c1ad99f856f669a754169
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
This change allows tsnet nodes to act as Service hosts by adding a new
function, tsnet.Server.ListenService. Invoking this function will
advertise the node as a host for the Service and create a listener to
receive traffic for the Service.
Fixes#17697Fixestailscale/corp#27200
Signed-off-by: Harry Harpham <harry@tailscale.com>
fixestailscale/tailscale#18418
Both Serve and PeerAPI broke when we moved the TailscaleInterfaceName
into State, which is updated asynchronously and may not be
available when we configure the listeners.
This extracts the explicit interface name property from netmon.State
and adds as a static struct with getters that have proper error
handling.
The bug is only found in sandboxed Darwin clients, where we
need to know the Tailscale interface details in order to set up the
listeners correctly (they must bind to our interface explicitly to escape
the network sandboxing that is applied by NECP).
Currently set only sandboxed macOS and Plan9 set this but it will
also be useful on Windows to simplify interface filtering in netns.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
TPM-based features have been incredibly painful due to the heterogeneous
devices in the wild, and many situations in which the TPM "changes" (is
reset or replaced). All of this leads to a lot of customer issues.
We hoped to iron out all the kinks and get all users to benefit from
state encryption and hardware attestation without manually opting in,
but the long tail of kinks is just too long.
This change disables TPM-based features on Windows and Linux by default.
Node state should get auto-decrypted on update, and old attestation keys
will be removed.
There's also tailscaled-on-macOS, but it won't have a TPM or Keychain
bindings anyway.
Updates #18302
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
updates tailscale/corp#33891
Addresses several older the TODO's in netmon. This removes the
Major flag precomputes the ChangeDelta state, rather than making
consumers of ChangeDeltas sort that out themselves. We're also seeing
a lot of ChangeDelta's being flagged as "Major" when they are
not interesting, triggering rebinds in wgengine that are not needed. This
cleans that up and adds a host of additional tests.
The dependencies are cleaned, notably removing dependency on netmon
itself for calculating what is interesting, and what is not. This includes letting
individual platforms set a bespoke global "IsInterestingInterface"
function. This is only used on Darwin.
RebindRequired now roughly follows how "Major" was historically
calculated but includes some additional checks for various
uninteresting events such as changes in interface addresses that
shouldn't trigger a rebind. This significantly reduces thrashing (by
roughly half on Darwin clients which switching between nics). The individual
values that we roll into RebindRequired are also exposed so that
components consuming netmap.ChangeDelta can ask more
targeted questions.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
It appears (*controlclient.Auto).Shutdown() can still deadlock when called with b.mu held, and therefore the changes in #18127 are unsafe.
This reverts #18127 until we figure out what causes it.
This reverts commit d199ecac80083e64d32baf3b473c67b11a6e6936.
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Previously we only set this when it updated, which was fine for the first
call to Start(), but after that point future updates would be skipped if
nothing had changed. If Start() was called again, it would wipe the peer API
endpoints and they wouldn't get added back again, breaking exit nodes (and
anything else requiring peer API to be advertised).
Updates tailscale/corp#27173
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
If a packet arrives while WireGuard is being reconfigured with b.mu held, such as during a profile switch,
calling back into (*LocalBackend).GetPeerAPIPort from (*Wrapper).filterPacketInboundFromWireGuard
may deadlock when it tries to acquire b.mu.
This occurs because a peer cannot be removed while an inbound packet is being processed.
The reconfig and profile switch wait for (*Peer).RoutineSequentialReceiver to return, but it never finishes
because GetPeerAPIPort needs b.mu, which the waiting goroutine already holds.
In this PR, we make peerAPIPorts a new syncs.AtomicValue field that is written with b.mu held
but can be read by GetPeerAPIPort without holding the mutex, which fixes the deadlock.
There might be other long-term ways to address the issue, such as moving peer API listeners
from LocalBackend to nodeBackend so they can be accessed without holding b.mu,
but these changes are too large and risky at this stage in the v1.92 release cycle.
Updates #18124
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Previously, callers of (*LocalBackend).resetControlClientLocked were supposed
to call Shutdown on the returned controlclient.Client after releasing b.mu.
In #17804, we started calling Shutdown while holding b.mu, which caused
deadlocks during profile switches due to the (*ExecQueue).RunSync implementation.
We first patched this in #18053 by calling Shutdown in a new goroutine,
which avoided the deadlocks but made TestStateMachine flaky because
the shutdown order was no longer guaranteed.
In #18070, we updated (*ExecQueue).RunSync to allow shutting down
the queue without waiting for RunSync to return. With that change,
shutting down the control client while holding b.mu became safe.
Therefore, this PR updates (*LocalBackend).resetControlClientLocked
to shut down the old client synchronously during the reset, instead of
returning it and shifting that responsibility to the callers.
This fixes the flaky tests and simplifies the code.
Fixes#18052
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In suggestExitNodeLocked, if no exit node candidates have a home DERP or
valid location info, `bestCandidates` is an empty slice. This slice is
passed to `selectNode` (`randomNode` in prod):
```go func randomNode(nodes views.Slice[tailcfg.NodeView], …) tailcfg.NodeView {
…
return nodes.At(rand.IntN(nodes.Len()))
}
```
An empty slice becomes a call to `rand.IntN(0)`, which panics.
This patch changes the behaviour, so if we've filtered out all the
candidates before calling `selectNode`, reset the list and then pick
from any of the available candidates.
This patch also updates our tests to give us more coverage of `randomNode`,
so we can spot other potential issues.
Updates #17661
Change-Id: I63eb5e4494d45a1df5b1f4b1b5c6d5576322aa72
Signed-off-by: Alex Chan <alexc@tailscale.com>
In PR tailscale/corp#34401, the `traffic-steering` feature flag does
not automatically enable traffic steering for all nodes. Instead, an
admin must add the `traffic-steering` node attribute to each client
node that they want opted-in.
For backwards compatibility with older clients, tailscale/corp#34401
strips out the `traffic-steering` node attribute if the feature flag
is not enabled, even if it is set in the policy file. This lets us
safely disable the feature flag.
This PR adds a missing test case for suggested exit nodes that have no
priority.
Updates tailscale/corp#34399
Signed-off-by: Simon Law <sfllaw@tailscale.com>
