Add patches to fix build failures on musl-based toolchains:
0002-xdpsock-fix-struct-ethhdr-redefinition-on-musl.patch:
xdpsock.c included <net/ethernet.h> and <netinet/ether.h> alongside
<linux/if_ether.h>, triggering a struct ethhdr redefinition on musl.
Replace BSD-style ether_header/ether_addr with struct ethhdr and drop
the conflicting includes.
0003-build-use-gnu2x-to-avoid-stdbool.h-dependency.patch:
Switch CFLAGS and BPF_CFLAGS from -std=gnu11 to -std=gnu2x. In C23,
bool is a native keyword, fixing "stdbool.h: No such file or directory"
errors with a clang lacking its resource directory (e.g. llvm-bpf built
with LLVM_INSTALL_TOOLCHAIN_ONLY=ON on musl targets).
Link: https://github.com/openwrt/openwrt/pull/22983
Signed-off-by: Nick Hainke <vincent@systemli.org>
Release Notes:
- https://github.com/libbpf/bpftool/releases/tag/v7.7.0
Backport upstream commit 9ba0b4add39e ("bpftool: Allow explicitly skip
llvm, libbfd and libcrypto dependencies") to fix a linker error. The
bpftool only needs skeleton generation, not program signing, so pass
SKIP_CRYPTO=1 to drop the libcrypto dependency entirely.
Link: 9ba0b4add3
Link: https://github.com/openwrt/openwrt/pull/22973
Signed-off-by: Nick Hainke <vincent@systemli.org>
Without this, max_oper_chwidth is set incorrectly,
thus ibss_mesh_select_80_160mhz fails to set the correct channel width
Signed-off-by: Richard Huynh <voxlympha@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22644
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The rss-input-xfrm workaround for Linux 6.6 is no longer needed with
current kernel versions. Remove the patch and the associated
--enable-rss-input-xfrm configure flag.
Link: https://github.com/openwrt/openwrt/pull/22841
Signed-off-by: Nick Hainke <vincent@systemli.org>
Version 6.19 - Feb 14, 2026
* Feature: support HW timestamp configuration (--set-hwtimestamp-cfg)
* Feature: display HW timestamp source (-T)
* Feature: support PLCA notifications (--get/set-plca-cfg)
* Feature: add PSE priority management support (--show/set-pse)
* Feature: support PSE notifications (--show/set-pse)
* Feature: support configuring RSS on IPv6 Flow Label (-n/-N)
* Feature: support FEC bit error histograms (--show-fec)
* Feature: register dump decoding for TI K3 CPSW and its ALE table (-d)
* Fix: fix missing headers in text output
* Fix: fix print_string when the value is NULL (-Werror=format-security)
* Fix: fix JSON output of SFP diagnostics
* Fix: fix duplicated JSON keys in module info
* Misc: clarify that symmetric RSS may be on by default (-x/-X)
* Misc: add AppStream metainfo file to %files section
Link: https://github.com/openwrt/openwrt/pull/22780
Signed-off-by: Nick Hainke <vincent@systemli.org>
The ucode path generates different erp_domain and fils_cache_id
values than the legacy shell path due to three mismatches:
1. erp_domain md5 input missing trailing newline (echo adds \n)
2. erp_domain output truncated to 4 chars instead of 8 (shell
uses head -c 8)
3. fils_cache_id md5 input missing trailing newline
4. erp_domain missing fallback to mobility_domain
Same bug pattern as mobility_domain fixed in commit b1dc2736db.
Fixes: #21768
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Signed-off-by: Joshua Klinesmith <joshuaklinesmith@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22677
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add some of the more current 4G and 5G modems.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Link: https://github.com/openwrt/openwrt/pull/13426
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The conditional runtime dependency on the ip package was originally
intended to only pull in the ip package when busybox ip is not
configured. However, in APK-based builds the BUSYBOX_CONFIG_*
variables may not be resolvable at package metadata generation
time, causing the ip dependency to be unconditionally baked into
the .apk package. This forces users to install ip-tiny or ip-full
even though busybox already provides the ip command.
Revert to the previous +@BUSYBOX_CONFIG_IP / +@BUSYBOX_CONFIG_FEATURE_IP_LINK
kconfig-level dependencies. These ensure busybox ip support is
enabled at config time without creating a runtime package dependency.
Both options default to y, and wireguard.uc only uses basic
ip link commands that busybox fully supports.
Fixes: openwrt#22637
Signed-off-by: Anand Kumar <anandvtu16158@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22652
Signed-off-by: Robert Marko <robimarko@gmail.com>
Doesn't make sense to have he_twt_required enabled without
he_twt_respodner.
Signed-off-by: Zhi-Jun You <hujy652@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/22577
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
In hostapd conf this option is set to 1 by default.
Then it's set to 0 if the HE MAC capability bit is not present.
Add an option in wifi-scripts to manually control it.
Signed-off-by: Zhi-Jun You <hujy652@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/22577
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add missing wpabuf_free calls to the hostapd_rrm_nr_set and
hostapd_rrm_beacon_req functions.
Signed-off-by: Vladimir Palevich <palevichva@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22538
Signed-off-by: Nick Hainke <vincent@systemli.org>
The hostapd configuration for SU-BEAMFORMEE was incorrectly using the
beamformer antenna count instead of the beamformee antenna count for the
[BF-ANTENNA-N] capability string.
Fix this by using config.beamformee_antennas instead.
Signed-off-by: Andrew Sim <andrewsimz@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22511
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
parent_tsf in struct rrm_measurement_beacon_report is le32 (32-bit),
but was being added with blobmsg_add_u16, truncating the value.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The beacon measurement token was not included in the ubus beacon-report
notification, causing consumers that need the token (e.g. for constructing
Beacon Metrics Response TLVs) to receive null.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use blobmsg_add_u32 for non-bool fields in order to avoid wrong
interpretations of the data on JSON/ucode conversion.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The Reporting Detail value is a 1-byte field, but was written as le16,
producing a 2-byte write that also contradicts the length field of 1
in the subelement header.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The reporting detail subelement (up to 3 bytes) was not accounted for
in the wpabuf allocation, causing a crash when reporting_detail is set
to a valid value (0, 1, or 2).
Signed-off-by: Felix Fietkau <nbd@nbd.name>
After 02e2065203c5e6c95f88e3501644d3e6ad740f89, it can happen that both,
[VHT160-80PLUS80] and [VHT160] are added to the vht_capab option in
an AP's hostapd.conf, which would cause a failure to start the AP.
Fix the logic in order to prevent such misconfiguration.
Fixes: #22481
Signed-off-by: Shine <4c.fce2@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22482
Signed-off-by: Robert Marko <robimarko@gmail.com>
% git shortlog v1.0.20250521..v1.0.20260223
Doug Freed (1):
wg-quick@.service: add deps on wg-quick.target
Jason A. Donenfeld (8):
wg-quick: linux: use smallest mtu, not largest
syncconf: account for psks removed from config file
wg-quick: linux: deal with resolvconf migration more gracefully
wg-quick: use addconf instead of setconf
wg-quick: linux: do not unnecessarily set sysctl
config: preserve const correctness
syncconf: account for persistent keepalive removed from config file
version: bump
Robyn Kosching (1):
wg-quick: pass on # comments to {Pre,Post}{Up,Down}
Build system: x86/64
Build-tested: x86/64-glibc
Run-tested: x86/64-glibc
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22190
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
a52cdb354d13 dns: validate IPv4 record addresses
b798c24205b5 dns: validate IPv6 record addresses
a3dcb4adc635 dns: validate reverse dns query name lengths
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
When the virtual package "uci-firewall" is installed, the choice
between "firewall" and "firewall4" is arbitrary, sometimes resulting
in one, sometimes the other.
Set the default variant on "firewall4" to make it the preferred
package when installed as a dependency.
Link: https://forum.openwrt.org/t/owut-openwrt-upgrade-tool/200035/1126
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22328
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
memcpy() with overlapping src and dest buffers is an undefined behavior
in C. In the current code, a ConfRej response is generated by copying
input data in-place, where the dest address is lower than the src.
This happens to work in practice because memcpy() forward-copies data,
matching the behavior of memmove() in this case.
However, if FORTIFY_SOURCE or Address Sanitizer is enabled, memcpy()
will detect the overlap at run time and abort the program.
Replace the memcpy() with memmove() to ensure a well-defined behavior.
Reported-by: Filippo Carletti <filippo.carletti@gmail.com>
MRU patch https://github.com/ppp-project/ppp/pull/573
Signed-off-by: Paul Donald <newtwen+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22286
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Introduce the devpath option to find the control channel device from a
hardware path for a USB or a WWAN device.
This option is useful when there are multiple modems connected to the
system. The name of the control channel device of a modem can change
depending on which modem initialises first or if it was recently plugged
in. The devpath option allows specifying the hardware path of the modem
where the control channel device will be found using that.
For the USB device hardware path, it is allowed to specify the USB port
number the modem is directly connected to.
If the device and devpath options are both set, devpath takes precedence
over device.
The USB device hardware path of a control channel device can be found by:
readlink -f /sys/class/usbmisc/cdc-wdmX/device
The WWAN device hardware path of a control channel device can be found by:
readlink -f /sys/class/wwan/wwanXqmiX/device
An example uci configuration would be:
config interface 'wwan_usb1'
option proto 'qmi'
option auth 'none'
option devpath '/sys/devices/platform/1e1c0000.xhci/usb1/1-1'
option apn 'internet'
option pdptype 'ipv4v6'
Or:
config interface 'wwan_pcie1'
option proto 'qmi'
option auth 'none'
option devpath '/sys/devices/platform/soc/11280000.pcie/pci0003:00/0003:00:00.0/0003:01:00.0'
option apn 'internet'
option pdptype 'ipv4v6'
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Introduce the devpath option to find the control channel device from a
hardware path for a USB or a WWAN device.
This option is useful when there are multiple modems connected to the
system. The name of the control channel device of a modem can change
depending on which modem initialises first or if it was recently plugged
in. The devpath option allows specifying the hardware path of the modem
where the control channel device will be found using that.
For the USB device hardware path, it is allowed to specify the USB port
number the modem is directly connected to.
If the device and devpath options are both set, devpath takes precedence
over device.
The USB device hardware path of a control channel device can be found by:
readlink -f /sys/class/usbmisc/cdc-wdmX/device
The WWAN device hardware path of a control channel device can be found by:
readlink -f /sys/class/wwan/wwanXmbimX/device
An example uci configuration would be:
config interface 'wwan_usb1'
option proto 'mbim'
option auth 'none'
option devpath '/sys/devices/platform/1e1c0000.xhci/usb1/1-1'
option apn 'internet'
option pdptype 'ipv4v6'
Or:
config interface 'wwan_pcie1'
option proto 'mbim'
option auth 'none'
option devpath '/sys/devices/platform/soc/11280000.pcie/pci0003:00/0003:00:00.0/0003:01:00.0'
option apn 'internet'
option pdptype 'ipv4v6'
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
The key variable is not defined in the scope when setting wpa_psk. Use
config.key instead.
This fixes configuration the 64 characters wpa_psk directly.
Reported-by: donjoe in OpenWrt Forum
Link: https://github.com/openwrt/openwrt/pull/22182
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Due to a missing include, the constant UINT_MAX is undefined. This
fixes issues when building v25.12.0-rc5. Including a newer version of
iproute2 would include the patch, but causes other building issues.
Signed-off-by: Jonas Lochmann <openwrt@jonaslochmann.de>
Link: https://github.com/openwrt/openwrt/pull/22128
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Use substr() instead of array index syntax to access the first
character of the endpoint host string, as ucode does not support
array-style indexing on strings.
Fixes: https://github.com/openwrt/openwrt/issues/22116
Fixes: 8f977b4a4055 ("wireguard-tools: fix handling of multi-value config options")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Config options like addresses and ip6prefix can be passed as either a
space-separated string or an array. Add a to_array() helper and use it
consistently for all multi-value options (addresses, ip6prefix,
allowed_ips).
Fixes: https://github.com/openwrt/openwrt/issues/22102
Fixes: 41bc454602f1 ("wireguard-tools: rewrite proto handler in ucode")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Without initializing pwd_group, it's set to 0, which is reserved value.
When EAP-PWD is used in wpa_supplicant/eapol_test, next error is seen:
EAP-PWD: Server EAP-pwd-ID proposal: group=0 random=1 prf=1 prep=0
EAP-pwd: Unsupported or disabled proposal
Signed-off-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Secondary BSSes inherit the alloc value which bypasses
NL80211_ATTR_VIF_RADIO_MASK in nl80211_create_iface() and causes the
kernel to default new interfaces to all radios.
The ucode bss_create fallback fails to correct this because
the interface is already UP.. the kernel rejects SET_INTERFACE with
-EBUSY.
Signed-off-by: Chad Monroe <chad@monroe.io>
