Fix dependency for kmod-drm-client-lib module:
error: recursive dependency detected!
symbol LINUX_6_18 is selected by PACKAGE_kmod-drm-client-lib
symbol PACKAGE_kmod-drm-client-lib is selected by LINUX_6_18
Fixes: e75ba35ed837 ("modules: video: introduce DRM client setup module")
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23124
Signed-off-by: Robert Marko <robimarko@gmail.com>
Changelog:
This release consists mainly of small fixes in the policy.
New Modules:
- ofono
- pd_mapper
- tee_supplicant
- xdsprpcd
- wayland
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://github.com/openwrt/openwrt/pull/23082
Signed-off-by: Robert Marko <robimarko@gmail.com>
Going from 6.12 to 6.18 I see breakage with a missing dependency
that drivers/net/ethernet/amazon/ena/ena_netdev.c has on ptp.ko.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Link: https://github.com/openwrt/openwrt/pull/23098
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Update to the latest version, and fix build on targets without
FS_POSIX_ACL.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23090
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Linux commit c9e5ac0 ("lib/crypto: mips/md5: Migrate optimized code into
library") removed the MIPS-Octeon-specific MD5 implementation
(octeon-md5.ko) and replaced it with an optimized library implementation
in lib/crypto.
As a result, CONFIG_CRYPTO_MD5_OCTEON and the module
arch/mips/crypto/octeon-md5.ko no longer exist in kernels >= 6.18.
Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23031
Signed-off-by: Nick Hainke <vincent@systemli.org>
The pppox module is a dependency of pppoe/pptp/pppol2tp and does not
have a separate Kconfig symbol.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23077
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The netifd/dhcp flow uses this, and as uxc mounts netifd in a
container, this allows not mounting `basename` for just a usage.
References: https://github.com/openwrt/procd/pull/34
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Andre Heider <a.heider@gmail.com>
The basic AN7581 NPU FW also supports WiFi offload for MT7992 WiFi chip.
Add this information in the package description to clarify this.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
6.14 has introduced a DRM client setup library. Add kmod-drm-client-lib
to support it, and add it as a dependency to DRM modules which depend on it.
Link: https://github.com/openwrt/openwrt/pull/22975
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
This is required to build the motorcomm dwmac driver which is widely
used on loongson platforms.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/22923
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Motorcomm YT6801 is a PCIe ethernet controller based on DWMAC4 IP. It
integrates an GbE phy, supporting WOL, VLAN tagging and various types
of offloading. It ships an on-chip eFuse for storing various vendor
configuration, including MAC address.
The PM and plat_data functions were slightly modified to build with
current kernel.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/22923
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
GCC15 defaults to C23, which does not work here.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23042
Signed-off-by: Robert Marko <robimarko@gmail.com>
Linux commit 09371e1349c9 ("lib/crypto: powerpc/md5: Migrate optimized code into library")
removed the PowerPC-specific MD5 implementation (md5-ppc.ko) and
replaced it with an optimized library implementation in lib/crypto.
As a result, CONFIG_CRYPTO_MD5_PPC and the module
arch/powerpc/crypto/md5-ppc.ko no longer exist in kernels >= 6.18.
Link: https://github.com/openwrt/openwrt/pull/22732
Signed-off-by: Nick Hainke <vincent@systemli.org>
The sama5d4_xplained_nandflash target incorrectly references microchip_sama5d3-xplained as its BUILD_DEVICES value.
This appears to be a copy-paste error, as all other SAMA5D4 Xplained targets (e.g. mmc and spiflash) correctly use microchip_sama5d4-xplained. The target name itself also clearly refers to the SAMA5D4 platform.
In addition, the SAMA5D3 Xplained and SAMA5D4 Xplained boards use different NAND flash hardware and configurations, so pointing the nandflash target to a SAMA5D3 device is incorrect and may lead to invalid builds or runtime issues.
Fix the inconsistency by updating BUILD_DEVICES to microchip_sama5d4-xplained, aligning the nandflash target with the rest of the SAMA5D4 definitions and ensuring the correct device mapping.
Signed-off-by: Cerrone Diamant <cerrone@tutamail.com>
Link: https://github.com/openwrt/openwrt/pull/23022
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add patches to fix build failures on musl-based toolchains:
0002-xdpsock-fix-struct-ethhdr-redefinition-on-musl.patch:
xdpsock.c included <net/ethernet.h> and <netinet/ether.h> alongside
<linux/if_ether.h>, triggering a struct ethhdr redefinition on musl.
Replace BSD-style ether_header/ether_addr with struct ethhdr and drop
the conflicting includes.
0003-build-use-gnu2x-to-avoid-stdbool.h-dependency.patch:
Switch CFLAGS and BPF_CFLAGS from -std=gnu11 to -std=gnu2x. In C23,
bool is a native keyword, fixing "stdbool.h: No such file or directory"
errors with a clang lacking its resource directory (e.g. llvm-bpf built
with LLVM_INSTALL_TOOLCHAIN_ONLY=ON on musl targets).
Link: https://github.com/openwrt/openwrt/pull/22983
Signed-off-by: Nick Hainke <vincent@systemli.org>
Switch http:// (and redundant ftp://) PKG_SOURCE_URL entries to https://
across tools/ and package/. PKG_HASH alone does not protect against an
attacker tampering with insecure downloads when a maintainer regenerates
the hash via `make ... FIXUP=1`: HTTPS authenticates the upstream so the
captured hash reflects real upstream content.
In-place http -> https (HTTPS reachability verified per host):
- tools/elftosb, tools/lzop, tools/liblzo, tools/mpfr, tools/dosfstools,
tools/libressl, tools/xz
- package/libs/mpfr, package/libs/libmnl, package/libs/libnfnetlink
Replaced with @OPENWRT (HTTPS-only mirror) where the upstream HTTPS host
is dead or has a broken certificate:
- package/libs/popt (ftp.rpm.org cert mismatch)
- package/firmware/ixp4xx-microcode (was http://downloads.openwrt.org)
- package/boot/imx-bootlets (trabant.uid0.hu cert mismatch)
- package/boot/kobs-ng (freescale.com URL is dead, redirects to nxp.com root)
Dropped redundant ftp://ftp.denx.de fallback (https://ftp.denx.de is
already listed):
- package/boot/uboot-tools, tools/mkimage
Signed-off-by: Paul Spooren <mail@aparcar.org>
Release Notes:
- https://github.com/libbpf/bpftool/releases/tag/v7.7.0
Backport upstream commit 9ba0b4add39e ("bpftool: Allow explicitly skip
llvm, libbfd and libcrypto dependencies") to fix a linker error. The
bpftool only needs skeleton generation, not program signing, so pass
SKIP_CRYPTO=1 to drop the libcrypto dependency entirely.
Link: 9ba0b4add3
Link: https://github.com/openwrt/openwrt/pull/22973
Signed-off-by: Nick Hainke <vincent@systemli.org>
ld.bfd is the default/only implementation for now but things may change in future.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21997
Signed-off-by: Nick Hainke <vincent@systemli.org>
Support for obsolete versions was dropped in upstream commit 72731b445ee3.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21997
Signed-off-by: Nick Hainke <vincent@systemli.org>
The by-now-upstream driver for the built-in 2.5GE PHY of the MediaTek
MT7988 and MT7987 SoC loads firmware at probe time.
Build the driver as a module in order to make sure the driver only
attempts to load the firmware by the time the rootfs with the firmware
file has become available.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add support for BUFFALO WSR-3000AX4P, to allow updating environment
variables of U-Boot on that device.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22587
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Exclude more apk related files from the sysupgrade backup list when
using the various options that scan /etc for changes.
Ensure removal of the system generated distfeeds list, as that
contains kernel- and version-specific urls and should never be
retained.
Also exclude any '*.apk-new' files, equivalent to the old '*-opkg'
files, which may have been created during package installation.
Example before
$ sysupgrade -l -c | grep apk
/etc/apk/keys/buildroot.pem
/etc/apk/repositories.d/customfeeds.list
/etc/apk/repositories.d/distfeeds.list
/etc/owut.d/pre-install.sh.apk-new
/etc/config/adblock.apk-new
After
$ sysupgrade -l -c | grep apk
/etc/apk/keys/buildroot.pem
/etc/apk/repositories.d/customfeeds.list
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22937
Signed-off-by: Robert Marko <robimarko@gmail.com>
This device has a redundant configuration. Important when writing to it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22882
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fixes:
ifxmips_aes.c: In function 'gcm_aes_decrypt':
ifxmips_aes.c:1803:14: error: assignment discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
1803 | temp = walk.src.virt.addr;
| ^
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22921
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fixes:
ltq_atm.c: In function 'ltq_atm_probe':
ltq_atm.c:1840:36: error: passing argument 2 of 'platform_set_drvdata' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
1840 | platform_set_drvdata(pdev, ops);
| ^~~
In file included from ltq_atm.c:40:
/workspaces/openwrt/build_dir/target-mips_24kc_musl/linux-lantiq_xway/linux-6.18.21/include/linux/platform_device.h:276:47: note: expected 'void *' but argument is of type 'const struct ltq_atm_ops *'
276 | void *data)
| ~~~~~~^~~~
Fixes: c1fa85f65931 ("treewide: use of_device_get_match_data")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22921
Signed-off-by: Robert Marko <robimarko@gmail.com>
The 6.18 code works with older kernels as well. Remove the older section
and use the newer one always.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22925
Signed-off-by: Robert Marko <robimarko@gmail.com>
When we cross build uboot-tools, the dtc tool is still compiled for
the host. Therefore, we should not attempt to link the OpenWrt system
libraries. CPU architecture mismatch can lead to build errors.
Fixes: https://github.com/openwrt/openwrt/issues/22924
Fixes: 55925650aabb ("uboot-tools: update to v2026.04")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22927
Signed-off-by: Robert Marko <robimarko@gmail.com>
Specification:
The device is similar to the M30 but has only one LAN port and no WAN port.
- MT7981 CPU using 2.4GHz and 5GHz WiFi (both AX)
- 512MB RAM
- 128MB NAND flash with two UBI partitions with identical size
- 1 multi color LED (red, green, blue, white) connected via GCA230718
- 2 buttons (WPS, reset, LED)
- 1 1Gbit LAN port
Disassembly:
- There are two screws at the power connector which must be removed. Afterwards the top case can be removed (it is clipped on, so some tools are required).
Serial Interface:
- The serial interface can be connected to the 4 pin holes on the board. Do NOT connect VCC.
- The pins are labelled on the PCB (RX, TX, GND)
- Settings: 115200, 8N1
MAC addresses:
- LAN MAC is stored in partition "Odm" at offset 0x8f
- WLAN MAC (2.4 GHz and 5GHz) is LAN MAC + 1
Reverting back to OEM firmware:
- There is currently no easy way to revert back to the OEM image
- The methods from M30 and M60 doesn't seem to work anymore
- If you plan to revert back to OEM firmware later, do the following steps before flashing OpenWrt:
- Boot from initramfs as described in "Flashing via U-Boot" but don't flash anything
- Instead, make a backup of UBI and UBI1 partition
- The created dumps must be written to the initial partitions to revert back to OEM
Flashing via Recovery Web Interface:
- Set your IP address to 192.168.200.10, subnetmask 255.255.255.0
- Press the reset button while powering on the device
- Keep the reset button pressed until the LED blinks red
- Open a Chromium based and goto http://192.168.200.50/ (recovery web interface)
- Download openwrt-mediatek-filogic-dlink_aquila-pro-ai-e30-a1-squashfs-recovery.bin
- Note: The recovery web interface always reports successful flashing, even if it fails
- After flashing, the recovery web interface will try to forward the browser to 192.168.0.1 (can be ignored)
- If flashing was successful, OpenWrt is accessible via 192.168.1.1
- The recovery image boots an initramfs image, flash the sys upgrade image to get to „normal“ OpenWrt mode
Flashing via U-Boot:
- Open the case, connect to the UART console
- Set your IP address to 192.168.200.2, subnet mask 255.255.255.0. Connect to one of the LAN interfaces of the router
- Run a tftp server which provides openwrt-mediatek-filogic-dlink_aquila-pro-ai-e30-a1-initramfs-kernel.bin
- Supply the board with 12V
- Select "7. Load image" in the U-Boot menu
- Enter image file, tftp server IP and device IP (if they differ from the default).
- TFTP download to RAM will start. After a few seconds OpenWrt initramfs should start
- The initramfs is accessible via 192.168.1.1, change your IP address accordingly (or use multiple IP addresses on your interface)
- Perform a sysupgrade using openwrt-mediatek-filogic-dlink_aquila-pro-ai-e30-a1-squashfs-sysupgrade.bin
- Reboot the device. OpenWrt should start from flash now
Flashing via OEM web interface is not possible, as it will change the active partition and OpenWrt is only running on the first UBI partition.
Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22776
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
