mirrors/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2026-05-04 17:36:12 +02:00
Code Issues Projects Releases Wiki Activity

mediatek: add Huasifei WH3000 Pro NAND support

Browse Source 
This commit adds support for Huasifei WH3000 Pro NAND version.
There is an eMMC already supported in OpenWrt. The only difference is NAND chip.
This commit adds common .dtsi and separate .dts
for eMMC and nand versions.

**Huasifei WH3000 Pro NAND**
Portable Wi-Fi 6 travel router based on MediaTek MT7981A SoC. MT7981B+MT7976CN+RTL8221B Dual Core 1.3GHZ with 5G modems module and PWM Fan.

**Specifications**
SoC: Filogic 820 MT7981A (1.3GHz)
RAM: DDR4 1GB
Flash: 256mb Winbond SPI NAND
WiFi: 2.4GHz and 5GHz with 3 antennas
Ethernet:
1x WAN (10/100/1000M)
1x LAN (10/100/1000/2500M)
USB: 1x USB 3.0 port
Two buttons: reset and mode (BTN_0)
LEDS: blue, red, blue+red=pink
UART: 3.3V, TX, RX, GND / 115200 8N1
M.2 (WWAN) slot

**Installation via U-Boot rescue**
1. Set static IP 192.168.1.2 on your computer and default route as 192.168.1.1
2. Connect to the WAN port and hold the reset button while booting the device.
3. Wait for the LED to blink 5 times, and release the reset button.
4. Open U-boot web page on your browser at http://192.168.1.1
5. Select the OpenWRT sysupgrade image, upload it, and start the upgrade.
6. Wait for the router to flash the new firmware.
7. Wait for the router to reboot itself.

**Installation via sysupgrade**
Just flash sysupgrade file via [LuCI upgrade page](http://192.168.1.1/cgi-bin/luci/admin/system/flash) without saving the settings.

**Installation via SSH**
Upload the file to the router `/tmp` directory, `ssh root@192.168.1.1` and issue a command:
```
sysupgrade -n /tmp/openwrt-mediatek-filogic-huasifei_wh3000-pro-nand-squashfs-sysupgrade.bin
```

Signed-off-by: Fil Dunsky <filipp.dunsky@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22694
(cherry picked from commit f4c211f635283f085c88be40e8cddc89f8d79e5e)
Link: https://github.com/openwrt/openwrt/pull/22819
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Fil Dunsky 2026-03-30 17:07:28 +03:00 committed by Hauke Mehrtens
parent 0c6d004431
commit 37e1a96aed
7 changed files with 182 additions and 74 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

75
target/linux/mediatek/dts/mt7981b-huasifei-wh3000-pro-emmc.dts Normal file
View File

@ -0,0 +1,75 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7981b-huasifei-wh3000-pro.dtsi"
/ {
model = "Huasifei WH3000 Pro eMMC";
compatible = "huasifei,wh3000-pro-emmc", "mediatek,mt7981";
};
&chosen {
bootargs-append = " root=PARTLABEL=rootfs rootwait";
};
&mmc0 {
bus-width = <8>;
cap-mmc-highspeed;
max-frequency = <52000000>;
non-removable;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-1 = <&mmc0_pins_uhs>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
card@0 {
compatible = "mmc-card";
reg = <0>;
block {
compatible = "block-device";
partitions {
block-partition-factory {
partname = "factory";
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x1000>;
};
macaddr_factory_4: macaddr@4 {
compatible = "mac-base";
reg = <0x4 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
};
};
};
};
&pio {
mmc0_pins_default: mmc0-pins-default {
mux {
function = "flash";
groups = "emmc_45";
};
};
mmc0_pins_uhs: mmc0-pins-uhs {
mux {
function = "flash";
groups = "emmc_45";
};
};
};

73
target/linux/mediatek/dts/mt7981b-huasifei-wh3000-pro-nand.dts Normal file
View File

@ -0,0 +1,73 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7981b-huasifei-wh3000-pro.dtsi"
/ {
model = "Huasifei WH3000 Pro NAND";
compatible = "huasifei,wh3000-pro-nand", "mediatek,mt7981";
};
&spi0 {
status = "okay";
spi_nand: flash@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "BL2";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x100000 0x80000>;
};
partition@180000 {
label = "Factory";
reg = <0x180000 0x200000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x1000>;
};
macaddr_factory_4: macaddr@4 {
compatible = "mac-base";
reg = <0x4 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@380000 {
label = "FIP";
reg = <0x380000 0x200000>;
read-only;
};
partition@580000 {
label = "ubi";
reg = <0x580000 0xe280000>;
};
};
};
};

67
target/linux/mediatek/dts/mt7981b-huasifei-wh3000-pro.dts → target/linux/mediatek/dts/mt7981b-huasifei-wh3000-pro.dtsi
View File

@ -9,9 +9,6 @@
#include "mt7981b.dtsi"
/ {
model = "Huasifei WH3000 Pro";
compatible = "huasifei,wh3000-pro", "mediatek,mt7981";
aliases {
serial0 = &uart0;
led-boot = &led_sys_red;
@ -20,9 +17,8 @@
led-upgrade = &led_sys_blue;
};
chosen {
chosen: chosen {
stdout-path = "serial0:115200n8";
bootargs-append = " root=PARTLABEL=rootfs rootwait";
};
gpio-export {
@ -101,7 +97,7 @@
compatible = "ethernet-phy-ieee802.3-c45";
reg = <1>;
reset-assert-us = <100000>;
reset-deassert-us = <100000>;
reset-deassert-us = <221000>;
reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&pio>;
@ -116,66 +112,7 @@
status = "okay";
};
&mmc0 {
bus-width = <8>;
cap-mmc-highspeed;
max-frequency = <52000000>;
non-removable;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-1 = <&mmc0_pins_uhs>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
card@0 {
compatible = "mmc-card";
reg = <0>;
block {
compatible = "block-device";
partitions {
block-partition-factory {
partname = "factory";
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x1000>;
};
macaddr_factory_4: macaddr@4 {
compatible = "mac-base";
reg = <0x4 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
};
};
};
};
&pio {
mmc0_pins_default: mmc0-pins-default {
mux {
function = "flash";
groups = "emmc_45";
};
};
mmc0_pins_uhs: mmc0-pins-uhs {
mux {
function = "flash";
groups = "emmc_45";
};
};
pwm1_pins: pwm1-pins {
mux {
function = "pwm";

3
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
View File

@ -125,7 +125,8 @@ mediatek_setup_interfaces()
bananapi,bpi-r3-mini|\
edgecore,eap111|\
huasifei,wh3000|\
huasifei,wh3000-pro)
huasifei,wh3000-pro-emmc|\
huasifei,wh3000-pro-nand)
ucidef_set_interfaces_lan_wan eth0 eth1
;;
bazis,ax3000wm|\

3
target/linux/mediatek/filogic/base-files/etc/board.d/03_gpio_switches
View File

@ -5,7 +5,8 @@ board_config_update
board=$(board_name)
case "$board" in
huasifei,wh3000-pro)
huasifei,wh3000-pro-emmc|\
huasifei,wh3000-pro-nand)
ucidef_add_gpio_switch "modem_power" "Modem power" "modem_power" "0"
;;
teltonika,rutc50)

7
target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
View File

@ -135,7 +135,7 @@ platform_do_upgrade() {
glinet,gl-x3000|\
glinet,gl-xe3000|\
huasifei,wh3000|\
huasifei,wh3000-pro|\
huasifei,wh3000-pro-emmc|\
smartrg,sdg-8612|\
smartrg,sdg-8614|\
smartrg,sdg-8622|\
@ -160,7 +160,8 @@ platform_do_upgrade() {
;;
buffalo,wsr-6000ax8|\
cudy,wr3000h-v1|\
cudy,wr3000p-v1)
cudy,wr3000p-v1|\
huasifei,wh3000-pro-nand)
CI_UBIPART="ubi"
nand_do_upgrade "$1"
;;
@ -361,7 +362,7 @@ platform_copy_config() {
glinet,gl-x3000|\
glinet,gl-xe3000|\
huasifei,wh3000|\
huasifei,wh3000-pro|\
huasifei,wh3000-pro-emmc|\
jdcloud,re-cp-03|\
nradio,c8-668gl|\
smartrg,sdg-8612|\

28
target/linux/mediatek/image/filogic.mk
View File

@ -1585,18 +1585,38 @@ define Device/huasifei_wh3000
endef
TARGET_DEVICES += huasifei_wh3000
define Device/huasifei_wh3000-pro
define Device/huasifei_wh3000-pro-emmc
DEVICE_VENDOR := Huasifei
DEVICE_MODEL := WH3000 Pro
DEVICE_DTS := mt7981b-huasifei-wh3000-pro
DEVICE_VARIANT := eMMC
DEVICE_DTS := mt7981b-huasifei-wh3000-pro-emmc
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3 f2fsck mkf2fs
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware \
kmod-hwmon-pwmfan kmod-usb3 f2fsck mkf2fs
SUPPORTED_DEVICES += huasifei,wh3000-pro
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += huasifei_wh3000-pro
TARGET_DEVICES += huasifei_wh3000-pro-emmc
define Device/huasifei_wh3000-pro-nand
DEVICE_VENDOR := Huasifei
DEVICE_MODEL := WH3000 Pro
DEVICE_VARIANT := NAND
DEVICE_DTS := mt7981b-huasifei-wh3000-pro-nand
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 229376k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware \
kmod-usb3 kmod-hwmon-pwmfan
endef
TARGET_DEVICES += huasifei_wh3000-pro-nand
define Device/imou_hx21
DEVICE_VENDOR := Imou