For p4 devices, the device will be added but unavailable at the beginning.
The device will later on being marked as available once the pipeline is pushed
to the device.
Change-Id: I186ddfbf34cfc1e80493248a123bd2931e7c6729
- Do not punt link local address if the device is not configured with ipv6Loopback
- Do not punt NDP and block DAD if the device is not configured with ipv6Loopback
Change-Id: Iaf36bcf9bf3c11bc199c271f1a03eb6ae448cfab
P4 switch requires explicit pop VLAN when necessary.
This is the missing part of gerrit #19301.
Change-Id: I809a1066cbaddd05154556ad300e59883245e0f7
(cherry picked from commit cee433bc37da8536807e8a5fbbd85315b8ca95bd)
When a dual homed host moves from [1A/1, 1B/1] to [1A/2, 1B/1], it is very likely that 1B side moves as well.
A verify probe should be sent on 1B/1 to see if the host is still there.
Change-Id: Ib40dcb51e0980a642e308ee3b883dc19551317df
sr-device-subnet was not properly maintained and the subnet was not populated
Also implement the unit test for this scenario
Change-Id: I1507ce2457588992ff8aae216339b6bd80c67acd
- Dune doesn't support VLAN translation in table 10. Need to revisit this with egress table
- Remove redundant setVlan action
- Implement partial unit test for PwaasUtil
Change-Id: Iabed388f6c68d8ddfc64a3302e6084c2e2aeeb44
- admin role required for POST, PUT, DELETE & PATCH
- viewer role required for all other requests
- cleaned up all web.xml files for consistency and correctness
Change-Id: I33bad5cec0fb0f4285eed84173025b0a107b5aec
- Push ACL flow to ignore xconnect VLAN
- Add pair port to the L2FG internally
- Remove the ETH_TYPE restriction in OFDPA processVersatile
- Remove the NOACTION warning in OFDPA processVersatile
- Do not push bridging flow for hosts that have wrong VLAN tag
Known issue:
- flooding issue on the pair port
- tagged host will be learnt before xconnect config is pushed (will be ignored by SR)
Change-Id: I30e4f46e54daa0f7bd349419df100523dceb2c4c
Two main changes for the bug-fix:
- avoid doing a full-reroute in the event of link failure as this will leave behind stale state in stores
if event has been preceded by mastership change leading to the nuking of the ecmpSpg for one of the
link's devices; instead do a rehash
- when full-reroute is attempted, do it only once, with a complete nuke of the next-obj store
Improvement in group handling allows for a max number of retries for a group that failed to be added.
Earlier behavior was to try only once, and if it fails, it gets removed from the group-store. Now it
is removed after a couple of retries - so total 3 attempts to program the group.
Change-Id: I54ca8203cef779463522b01353540d12f8be3c91
Set this option to true to respond to arp requests
for unknown hosts [Default Value = True].
Change-Id: Ia2f10b2fae22b65cd2ec12a04accd9ad0ec15109
(cherry picked from commit 7bf9e441bdc4c7ac420f2a59e4d176005a40d020)
- add support for apps depending on other apps
- build files for route-service and segment routing
Change-Id: I4850aacfe050f802072e2d59a6a21bcefd784e67
- refactored l2 handler to *only* program initiation and termination
points and nothing else.
- all pseudowires are set to be carried wiht PSEUDOWIRE_VLAN fetched
from srManager.
Change-Id: I811370f21156a9ca4d42becb1f9401dbeb4fdc33
- Co-ordination when creating - removing pseudowires from
different instances with a use of a DistributedLock.
- Fixed REST API To return json with specific error for
the single pw instantiation.
- Fixed REST API to return specific error also for pseudowires
that could not be decoded.
- Minor bug fix to return appropriate error when instantiating
a pw from the command line that could not be decoded.
- Fixed bug when creating spine-leaf-leaf pseudowire where we observed flows in pending state.
- Improved logging.
Change-Id: I60dd0ebf8af63ca74d18cfe4801d01846641fb7b
- Implement probe retry
- Switch to typical core/provider design pattern for HostProbingService
and as a result decoupling the dependency between SR and HostLocationProvider
Change-Id: I33a15af580677ea376b421ac3e26f9821dcca844
