hostLearning config
- true: enable host learning
- false or not provided: disable host learning
suppressHost config
- all connect points listed here will be ignored
- no effect if hostLearning is false
- accept all hosts if this config is not provided
Change-Id: Id4a60bd47cac1f226ab8ba5391931ad2fb798529
We no longer need to configure /32 IP in interfaces.
SR will push a per-host route when discovering a host
with IP address(es) that does not belong to configured subnet.
Also includes:
- HostHandler refactoring
Change-Id: Ic1ad42d1ccdfee32be85f49e6fc94d9026000ffc
Automatically failover to backup spine if
- ingress - transit link down
- transit - egress link down
- transit device down
Can recover from fatal error with human involved
- ingress switch down
- egress switch down
- all links to spine down
Scan through McastRouteStore when
- SR activate
- link up
Also include following features
- Use flow objective context in McastHandler
- Update Mcast VLAN config sample
Change-Id: I75007d9efd7646e7c4e57fa6d3fc6943543153cf
Remove network-cfg
Each app has its own way to interpret the config.
Therefore it doesn't make sense to keep a generic one
In long term, each app should have a json schema that explain the meaning
Remove network-cfg-fabric4x4
It does not provide more info than 2x2
Remove network-cfg-fabric2x2-default-route and network-cfg-fabric2x2-xconnect
Keeping features in different configs doesn't help much but make people confused
Also it's hard to maintain so many samples
Add network-cfg-fabric-2x2-all
Full fabric config with readme
The html documentation is just temporary. We will have a json schema
Rename/update network-cfg-fabric-2x2-min.json
Minimum config required by the fabric
Change-Id: I93332d8166c264b9dbb7819b90099c2f19fcf3b5
- Separate host and subnet suppression
- Use port instead of interface to specify which SR should ignore
Change-Id: Ie6491950cddf0860924565f081504b4f4d788179
- Added excludePorts config to SegmentRouting
SR does not push VLAN filtering rule to excluded ports
SR ignores hosts learned from excluded ports
- Use separate default route config
Don't need to config 0/0 on the interface anymore
Change-Id: Iea75d60c2d5f5368e79652b1bf192a6ced49030d
- Support multiple subnets per port. getIpPort() will only return the first non-/32 and non-/0 subnet
/32 is used as vSG subnet
/0 is used as default gateway
- Support multiple L3 unicast group on a single port
Change the way to generate the group ID and group key
- Special case for 0.0.0.0 host. Push a /0 to IP table instead of /32
- Implement vRouterConfig
Put VR MAC to TMAC table of all leaves when config added
When processEthDst see PortNumber.ANY in key, match ETH_DST only
- For OFDPA, wipe existing instruction before sending to controller
So packet that misses L3 unicast table won't be sent to controller twice
- For SpringOpenTTP, pop VLAN before sending to controller
- Move several constant definitions to SegmentRoutingService
- Add minimum priority for IP rules such that /0 won't collide with zero priority default rules
- Update the config sample
Use VLAN=-1 for hosts
Add example for default route
Change-Id: Id751697ce36a7e5c13b3859350ff21b585c38525
- Uses netcfg defined value as available resource if defined,
else uses port speed as available Bandwidth resource
Change-Id: I2dde9a9194025194ed8785b4608f064debab182b
Change related to this topic:
- Support VLAN cross-connect traffic
Utilize ports subjectClass to achieve. For non-xConnect port, set interface VLAN to -1
- Remove VLAN checking since we have multiple VLANs per port
- Hash the L2 interface group key generation to include VLAN as well
- Update the network-cfg.json sample
Other refactoring changes:
- Read next objective stores from srManager directly
- Use constant for flow priority
- CORD-267 Javadoc fix
Change-Id: I4ca8c2d9c8b3633a4a0101c5070d19343f7e5b90
- Add Javadoc and fix function name convention
- Add setAdjancencySids method
- Change return value of getAdjacencySids from List to ImmutableSet
- Validate config value
- Add unit test for SegmentRoutingConfig
Change-Id: Ic43ac31a49da8a9d62131d7803930280cf9994d2
* Implement new application org.onosproject.netcfghost
* Implement BasicHostConfig to include IP and location information
- Update network-cfg.json to add host config example
- Add network-cfg-2x2-leaf-spine.json for 2x2 leaf-spine network in SegmentRouting
* Update Segment Rounting
- Punt ARP packets
(which is done by HostLocationProvider previously)
- Check existing hosts when device connected or configured
Change-Id: I03986ddc8203d740b5bf26903e3dbf866d4d4600
related to CORD-200, CORD-209
- fix typo in network-cfg.json
- remove segmentrouting_dell.conf since we don't need this anymore
with the new Network Configuration Subsystem
Change-Id: I5dcb2e2e0e6b89c4770df2485a8d27fbcc05cf67
* The (deployed) Interface addresses configuration file "addresses.json"
from the apps/config application is expected to be found in the
/opt/onos/config directory
* The (deployed) SDN-IP configuration file "sdnip.json" is expected
to be found in the /opt/onos/config directory
* All configuration files (i.e., addresses.json and sdnip.json) should
be stored in the tools/package/config directory before deployment
(i.e., before running onos-config)
* Removed the apps/config/src/main/resources/config.json sample configuration
file, because it was incorrect, and replaced it with "addresses.json"
file in the same directory
* Updated the text in files tools/package/config/README and
apps/sdnip/src/main/resources/config-examples/README
* Minor code cleanup in SdnIpConfigReader.java and NetworkConfigReader.java
Change-Id: I8af75e62a94e4fb701e2c6a09cde93cd8461e255
