Use forward domain notation for annotations

"kube-router.io/..."
This is in line with convention set by k8s upstream.

Documentation/README.md

@@ -180,7 +180,7 @@ and run kube-proxy with the configuration you have.
 
 Communication from a Pod that is behind a Service to its own ClusterIP:Port is
 not supported by default.  However, It can be enabled per-service by adding the
-`io.kube-router.net.service.hairpin=` annotation, or for all Services in a cluster by
+`kube-router.io/service.hairpin=` annotation, or for all Services in a cluster by
 passing the flag `--hairpin-mode=true` to kube-router.
 
 Additionally, the `hairpin_mode` sysctl option must be set to `1` for all veth
@@ -209,7 +209,7 @@ Service ClusterIP if it is logging the source IP.
 
 To enable hairpin traffic for Service `my-service`:
 ```
-kubectl annotate service my-service "io.kube-router.net.service.hairpin="
+kubectl annotate service my-service "kube-router.io/service.hairpin="
 ```
 
 

Documentation/bgp.md

@@ -23,13 +23,13 @@ per node models. Nodes in the cluster does not form full node-to-node mesh.
 Users has to explicitly select this mode by specifying `--nodes-full-mesh=false`
 when launching kube-router. In this mode kube-router expects each node is
 configured with an ASN number from the node's API object annoations. Kube-router
-will use the node's `io.kube-router.net.node.asn` annotation value as the ASN
+will use the node's `kube-router.io/node.asn` annotation value as the ASN
 number for the node.
 
 Users can annotate node objects with the following command:
 
 ```
-kubectl annotate node <kube-node> "io.kube-router.net.node.asn=64512"
+kubectl annotate node <kube-node> "kube-router.io/node.asn=64512"
 ```
 
 Only nodes with in same ASN form full mesh. Two nodes with different ASNs never
@@ -55,21 +55,21 @@ For example:
 Alternativley, each node can be configured with one or more node specific BGP
 peers. Information regarding node specific BGP peer is read from node API object
 annotations:
-- `io.kube-router.net.peer.ips`
-- `io.kube-router.net.peer.asns`
+- `kube-router.io/peer.ips`
+- `kube-router.io/peer.asns`
 
 
 For e.g users can annotate node object with below commands
 ```
-kubectl annotate node <kube-node> "io.kube-router.net.peer.ips=192.168.1.99,192.168.1.100"
-kubectl annotate node <kube-node> "io.kube-router.net.peer.asns=65000,65000"
+kubectl annotate node <kube-node> "kube-router.io/peer.ips=192.168.1.99,192.168.1.100"
+kubectl annotate node <kube-node> "kube-router.io/peer.asns=65000,65000"
 ```
 
 ### BGP Peer Password Authentication
 
 The examples above have assumed there is no password authentication with BGP
 peer routers. If you need to use a password for peering, you can use the
-`--peer-router-passwords` CLI flag or the `io.kube-router.net.peer.passwords` node
+`--peer-router-passwords` CLI flag or the `kube-router.io/peer.passwords` node
 annotation.
 
 #### Base64 Encoding Passwords
@@ -97,7 +97,7 @@ Note the comma indicating the end of the first password.
 
 Now here's the same example but configured as node annotations:
 ```
-kubectl annotate node <kube-node> "io.kube-router.net.peer.ips=192.168.1.99,192.168.1.100"
-kubectl annotate node <kube-node> "io.kube-router.net.peer.asns=65000,65000"
-kubectl annotate node <kube-node> "io.kube-router.net.peer.passwords=U2VjdXJlUGFzc3dvcmQK,"
+kubectl annotate node <kube-node> "kube-router.io/peer.ips=192.168.1.99,192.168.1.100"
+kubectl annotate node <kube-node> "kube-router.io/peer.asns=65000,65000"
+kubectl annotate node <kube-node> "kube-router.io/peer.passwords=U2VjdXJlUGFzc3dvcmQK,"
 ```

Documentation/upgrading.md

@@ -95,13 +95,13 @@ CLI flag additions:
 
 Annotation key changes:
 - OLD: `kube-router.io/hairpin-mode=` -> NEW:
-  `io.kube-router.net.service.hairpin=`
-- OLD: `net.kuberouter.nodeasn=` -> NEW: `io.kube-router.net.node.asn=`
-- OLD: `net.kuberouter.node.bgppeer.address=` -> NEW: `io.kube-router.net.peer.ips`
-- OLD: `net.kuberouter.node.bgppeer.asn` -> NEW: `io.kube-router.net.peer.asns`
+  `kube-router.io/service.hairpin=`
+- OLD: `net.kuberouter.nodeasn=` -> NEW: `kube-router.io/node.asn=`
+- OLD: `net.kuberouter.node.bgppeer.address=` -> NEW: `kube-router.io/peer.ips`
+- OLD: `net.kuberouter.node.bgppeer.asn` -> NEW: `kube-router.io/peer.asns`
 
 Annotation key additions:
-- NEW: `io.kube-router.net.peer.passwords`
+- NEW: `kube-router.io/peer.passwords`
 
 #### v0.0.17 Upgrade Procedure
 
@@ -129,7 +129,7 @@ Annotations:       kube-router.io/hairpin-mode=
 
 You will then want to make a new annotation with the new key:
 ```sh
-kubectl annotate service hairpin-service "io.kube-router.net.service.hairpin="
+kubectl annotate service hairpin-service "kube-router.io/service.hairpin="
 ```
 
 Once all new annotations are created, proceed with the

app/controllers/network_routes_controller.go

@@ -779,7 +779,7 @@ func (nrc *NetworkRoutingController) syncPeers() {
 		// if node full mesh is not requested then just peer with nodes with same ASN
 		// (run iBGP among same ASN peers)
 		if !nrc.bgpFullMeshMode {
-			nodeasn, ok := node.ObjectMeta.Annotations["io.kube-router.net.node.asn"]
+			nodeasn, ok := node.ObjectMeta.Annotations["kube-router.io/node.asn"]
 			if !ok {
 				glog.Infof("Not peering with the Node %s as ASN number of the node is unknown.",
 					nodeIP.String())
@@ -982,7 +982,7 @@ func (nrc *NetworkRoutingController) startBgpServer() error {
 	if nrc.bgpFullMeshMode {
 		nodeAsnNumber = nrc.defaultNodeAsnNumber
 	} else {
-		nodeasn, ok := node.ObjectMeta.Annotations["io.kube-router.net.node.asn"]
+		nodeasn, ok := node.ObjectMeta.Annotations["kube-router.io/node.asn"]
 		if !ok {
 			return errors.New("Could not find ASN number for the node. " +
 				"Node needs to be annotated with ASN number details to start BGP server.")
@@ -1030,7 +1030,7 @@ func (nrc *NetworkRoutingController) startBgpServer() error {
 	// else attempt to get peers from node specific BGP annotations.
 	if len(nrc.globalPeerRouters) == 0 {
 		// Get Global Peer Router ASN configs
-		nodeBgpPeerAsnsAnnotation, ok := node.ObjectMeta.Annotations["io.kube-router.net.peer.asns"]
+		nodeBgpPeerAsnsAnnotation, ok := node.ObjectMeta.Annotations["kube-router.io/peer.asns"]
 		if !ok {
 			glog.Infof("Could not find BGP peer info for the node in the node annotations so skipping configuring peer.")
 			return nil
@@ -1044,7 +1044,7 @@ func (nrc *NetworkRoutingController) startBgpServer() error {
 		}
 
 		// Get Global Peer Router IP Address configs
-		nodeBgpPeersAnnotation, ok := node.ObjectMeta.Annotations["io.kube-router.net.peer.ips"]
+		nodeBgpPeersAnnotation, ok := node.ObjectMeta.Annotations["kube-router.io/peer.ips"]
 		if !ok {
 			glog.Infof("Could not find BGP peer info for the node in the node annotations so skipping configuring peer.")
 			return nil
@@ -1058,7 +1058,7 @@ func (nrc *NetworkRoutingController) startBgpServer() error {
 
 		// Get Global Peer Router Password configs
 		peerPasswords := []string{}
-		nodeBGPPasswordsAnnotation, ok := node.ObjectMeta.Annotations["io.kube-router.net.peer.passwords"]
+		nodeBGPPasswordsAnnotation, ok := node.ObjectMeta.Annotations["kube-router.io/peer.passwords"]
 		if !ok {
 			glog.Infof("Could not find BGP peer password info in the node's annotations. Assuming no passwords.")
 		} else {

app/controllers/network_services_controller.go

@@ -426,7 +426,7 @@ func buildServicesInfo() serviceInfoMap {
 			}
 
 			svcInfo.sessionAffinity = (svc.Spec.SessionAffinity == "ClientIP")
-			_, svcInfo.hairpin = svc.ObjectMeta.Annotations["io.kube-router.net.service.hairpin"]
+			_, svcInfo.hairpin = svc.ObjectMeta.Annotations["kube-router.io/service.hairpin"]
 
 			svcId := generateServiceId(svc.Namespace, svc.Name, port.Name)
 			serviceMap[svcId] = &svcInfo