Akhnin Nikita reported that Lua doesn't build on Solaris 10 because
the code uses timegm() to parse a date, which is not provided there.
The recommended way to implement timegm() is broken in the man page,
as it is based on a change of the TZ environment variable at run time
before calling the function (which is obviously not thread safe, and
terribly inefficient).
Here instead we rely on the new my_timegm() function, it should be
sufficient for all known use cases.
timegm() is not provided everywhere and the documentation on how to
replace it is bogus as it proposes an inefficient and non-thread safe
alternative.
Here we reimplement everything needed to compute the number of seconds
since Epoch based on the broken down fields in struct tm. It is only
guaranteed to return correct values for correct inputs. It was successfully
tested with all possible 32-bit values of time_t converted to struct tm
using gmtime() and back to time_t using the legacy timegm() and this
function, and both functions always produced the same result.
Thanks to Benoît Garnier for an instructive discussion and detailed
explanations of the various time functions, leading to this solution.
The commit 5db33cbd "MEDIUM: ssl: ssl_methods implementation is reworked and
factored for min/max tlsxx" drop the case when ssl lib have removed SSLv3.
The commit 1e59fcc5 "BUG/MINOR: ssl: Be sure that SSLv3 connection methods
exist for openssl < 1.1.0" fix build but it's false because haproxy think
that ssl lib support SSLv3.
SSL_OP_NO_* are flags to set in ssl_options and is the way haproxy do the
link between ssl capabilities and haproxy configuration. (The mapping table
is done via methodVersions). SSL_OP_NO_* is set to 0 when ssl lib doesn't
support a new TLS version. Older version (like SSLv3) can be removed at
build or unsupported (like libressl). In all case OPENSSL_NO_SSL3 is define.
To keep the same logic, this patch alter SSL_OP_NO_SSLv3 to 0 when SSLv3 is
not supported by ssl lib (when OPENSSL_NO_SSL3 is define).
The previous patch ("MINOR: http: Rely on analyzers mask to end processing in
forward_body functions") contains a bug for keep-alive transactions.
For these transactions, AN_REQ_FLT_END and AN_RES_FLT_END analyzers must be
removed only when all outgoing data was forwarded.
Instead of relying on request or response state, we use "chn->analysers" mask as
all other analyzers. So now, http_resync_states does not return anything
anymore.
The debug message in http_resync_states has been improved.
When the body length of a HTTP response is undefined, the HTTP parser is blocked
in the body parsing. Before HAProxy 1.7, in this case, because
AN_RES_HTTP_XFER_BODY is never set, there is no visible effect. When the server
closes its connection to terminate the response, HAProxy catches it as a normal
closure. Since 1.7, we always set this analyzer to enter at least once in
http_response_forward_body. But, in the present case, when the server connection
is closed, http_response_forward_body is called one time too many. The response
is correctly sent to the client, but an error is catched and logged with "SD--"
flags.
To reproduce the bug, you can use the configuration "tests/test-fsm.cfg". The
tests 3 and 21 hit the bug.
Idea to fix the bug is to switch the response in TUNNEL mode without switching
the request. This is possible because of previous patches.
First, we need to detect responses with undefined body length during states
synchronization. Excluding tunnelled transactions, when the response length is
undefined, TX_CON_WANT_CLO is always set on the transaction. So, when states are
synchronized, if TX_CON_WANT_CLO is set, the response is switched in TUNNEL mode
and the request remains unchanged.
Then, in http_msg_forward_body, we add a specific check to switch the response
in DONE mode if the body length is undefined and if there is no data filter.
This patch depends on following previous commits:
* MINOR: http: Switch requests/responses in TUNNEL mode only by checking txn flags
* MINOR: http: Reorder/rewrite checks in http_resync_states
This patch must be backported in 1.7 with 2 previous ones.
Today, the only way to have a request or a response in HTTP_MSG_TUNNEL state is
to have the flag TX_CON_WANT_TUN set on the transaction. So this is a symmetric
state. Both the request and the response are switch in same time in this
state. This can be done only by checking transaction flags instead of relying on
the other side state. This is the purpose of this patch.
This way, if for any reason we need to switch only one side in TUNNEL mode, it
will be possible. And to prepare asymmetric cases, we check channel flags in
DONE _AND_ TUNNEL states.
WARNING: This patch will be used to fix a bug. The fix will be commited in a
very next commit. So if the fix is backported, this one must be backported too.
The previous patch removed the forced symmetry of the TUNNEL mode during the
state synchronization. Here, we take care to remove body analyzer only on the
channel in TUNNEL mode. In fact, today, this change has no effect because both
sides are switched in same time. But this way, with some changes, it will be
possible to keep body analyzer on a side (to finish the states synchronization)
with the other one in TUNNEL mode.
WARNING: This patch will be used to fix a bug. The fix will be commited in a
very next commit. So if the fix is backported, this one must be backported too.
We cannot perform garbage collection on unreferenced thread.
This memory is now free and another Lua process can use it for
other things.
HAProxy is monothread, so this bug doesn't cause crash.
This patch must be backported in 1.6 and 1.7
In some cases, the socket is misused. The user can open socket and never
close it, or open the socket and close it without sending data. This
causes resources leak on all resources associated to the stream (buffer,
spoe, ...)
This is caused by the stream_shutdown function which is called outside
of the stream execution process. Sometimes, the shtudown is required
while the stream is not started, so the cleanup is ignored.
This patch change the shutdown mode of the session. Now if the session is
no longer used and the Lua want to destroy it, it just set a destroy flag
and the session kill itself.
This patch should be backported in 1.6 and 1.7
When we destroy the Lua session, we manipulates Lua stack,
so errors can raises. It will be better to catch these errors.
This patch should be backported in 1.6 and 1.7
Just forgot of reset the safe mode. This have not consequences
the safe mode just set a pointer on fucntion which is called only
and initialises a longjmp.
Out of lua execution, this longjmp is never executed and the
function is never called.
This patch should be backported in 1.6 and 1.7
When several stick-tables were configured with several peers sections,
only a part of them could be synchronized: the ones attached to the last
parsed 'peers' section. This was due to the fact that, at least, the peer I/O handler
refered to the wrong peer section list, in fact always the same: the last one parsed.
The fact that the global peer section list was named "struct peers *peers"
lead to this issue. This variable name is dangerous ;).
So this patch renames global 'peers' variable to 'cfg_peers' to ensure that
no such wrong references are still in use, then all the functions wich used
old 'peers' variable have been modified to refer to the correct peer list.
Must be backported to 1.6 and 1.7.
In ssl_sock_to_buf(), when we face a small read, we used to consider it
as an indication for the end of incoming data, as is the case with plain
text. The problem is that here it's quite different, SSL records are
returned at once so doing so make us wake all the upper layers for each
and every record. Given that SSL records are 16kB by default, this is
rarely observed unless the protocol employs small records or the buffers
are increased. But with 64kB buffers while trying to deal with HTTP/2
frames, the exchanges are obviously suboptimal as there are two messages
per frame (one for the frame header and another one for the frame payload),
causing the H2 parser to be woken up half of the times without being able
to proceed :
try=65536 ret=45
try=65536 ret=16384
try=49152 ret=9
try=49143 ret=16384
try=32759 ret=9
try=32750 ret=16384
try=16366 ret=9
try=32795 ret=27
try=49161 ret=9
try=49152 ret=16384
try=49116 ret=9
try=49107 ret=16384
try=32723 ret=9
try=32714 ret=16384
try=16330 ret=9
try=32831 ret=63
try=49161 ret=9
try=49152 ret=16384
try=49080 ret=9
try=49071 ret=2181
With this change, the buffer can safely be filled with all pending frames
at once when they are available.
Only 100 was considered informational instead of all 1xx. This can be
a problem when facing a 102 ("progress") or with the upcoming 103 for
early hints. Let's properly handle all 1xx now, leaving a special case
for 101 which is used for the upgrade.
This fix should be backported to 1.7, 1.6 and 1.5. In 1.4 the code is
different but the backport should be made there as well.
With this patch additional information are added to stick-table definition
messages so that to make external application capable of learning peer
stick-table configurations. First stick-table entries duration is added
followed by the frequency counters type IDs and values.
May be backported to 1.7 and 1.6.
In the commit 2b553de5 ("BUG/MINOR: filters: Don't force the stream's wakeup
when we wait in flt_end_analyze"), we removed a task_wakeup in flt_end_analyze
to no consume too much CPU by looping in certain circumstances.
But this fix was too drastic. For Keep-Alive transactions, flt_end_analyze is
often called only for the response. Then the stream is paused until a timeout is
hitted or the next request is received. We need first let a chance to both
channels to call flt_end_analyze function. Then if a filter need to wait here,
it is its responsibility to wake up the stream when needed. To fix the bug, and
thanks to previous commits, we set the flag CF_WAKE_ONCE on channels to pretend
there is an activity. On the current channel, the flag will be removed without
any effect, but for the other side the analyzer will be called immediatly.
Thanks for Lukas Tribus for his detailed analysis of the bug.
This patch must be backported in 1.7 with the 2 previous ones:
* a94fda3 ("BUG/MINOR: http: Don't reset the transaction if there are still data to send")
* cdaea89 ("BUG/MINOR: stream: Don't forget to remove CF_WAKE_ONCE flag on response channel")
To reset an HTTP transaction, we need to be sure all data were sent, for the
request and the response. There are tests on request and response buffers for
that in http_resync_states function. But the return code was wrong. We must
return 0 to wait.
This patch must be backported in 1.7
This flag can be set on a channel to pretend there is activity on it. This is a
way to wake-up the corresponding stream and evaluate stream analyzers on the
channel. It is correctly handled on both channels but removed only on the
request channel.
This patch is flagged as a bug but for now, CF_WAKE_ONCE is never set on the
response channel.
When support for passing SNI to the server was added in 1.6-dev3, there
was no way to validate that the certificate presented by the server would
really match the name requested in the SNI, which is quite a problem as
it allows other (valid) certificates to be presented instead (when hitting
the wrong server or due to a man in the middle).
This patch adds the missing check against the value passed in the SNI.
The "verifyhost" value keeps precedence if set. If no SNI is used and
no verifyhost directive is specified, then the certificate name is not
checked (this is unchanged).
In order to extract the SNI value, it was necessary to make use of
SSL_SESSION_get0_hostname(), which appeared in openssl 1.1.0. This is
a trivial function which returns the value of s->tlsext_hostname, so
it was provided in the compat layer for older versions. After some
refinements from Emmanuel, it now builds with openssl 1.0.2, openssl
1.1.0 and boringssl. A test file was provided to ease testing all cases.
After some careful observation period it may make sense to backport
this to 1.7 and 1.6 as some users rightfully consider this limitation
as a bug.
Cc: Emmanuel Hocdet <manu@gandi.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The pool used to log the uri was created with a size of 0 because the
configuration and 'tune.http.logurilen' were parsed too earlier.
The fix consist to postpone the pool_create as it is done for
cookie captures.
Regression introduced with 'MINOR: log: Add logurilen tunable'
The bug: Maps/ACLs using the same file/id can mistakenly inherit
their flags from the last declared one.
i.e.
$ cat haproxy.conf
listen mylistener
mode http
bind 0.0.0.0:8080
acl myacl1 url -i -f mine.acl
acl myacl2 url -f mine.acl
acl myacl3 url -i -f mine.acl
redirect location / if myacl2
$ cat mine.acl
foobar
Shows an unexpected redirect for request 'GET /FOObAR HTTP/1.0\n\n'.
This fix should be backported on mainline branches v1.6 and v1.7.
Introduced regression with 'MAJOR: applet scheduler rework' (1.8-dev only).
The fix consist to re-enable the appctx immediatly from the
applet wake cb if the process_stream is not pending in runqueue
and the applet want perform a put or a get and the WAIT_ROOM
flag was removed by stream_int_notify.
Instead of doing a malloc/free to each HTTP transaction to allocate the
compression state (when the HTTP compression is enabled), we use a memory pool.
This patch fixes an obvious memory leak in the compression filter. The
compression state (comp_state) is allocated when a HTTP transaction starts, in
channel_start_analyze callback, Whether we are able to compression the response
or not. So it must be released when the transaction ends, in channel_end_analyze
callback.
But there is a bug here. The state is released on the response side only. So, if
a transaction ends before the response is started, it is never released. This
happens when a connection is closed before the response is started.
To fix the bug, statistics about the HTTP compression are now updated in
http_end callback, when the response parsing ends. It happens only if no error
is encountered and when the response is compressed. So, it is safe to release
the compression state in channel_end_analyze callback, regardless the
channel's type.
This patch must be backported in 1.7.
The reference of the current map/acl element to dump could
be destroyed if map is updated from an 'http-request del-map'
configuration rule or throught a 'del map/acl' on CLI.
We use a 'back_refs' chaining element to fix this. As it
is done to dump sessions.
This patch needs also fix:
'BUG/MAJOR: cli: fix custom io_release was crushed by NULL.'
To clean the back_ref and avoid a crash on a further
del/clear map operation.
Those fixes should be backported on mainline branches 1.7 and 1.6.
This patch wont directly apply on 1.6.
Recently merged commit 0cfe388 ("MINOR: frontend: retrieve the ALPN name when
available") assumed that the connection is always known in frontend_accept()
which is not true for outgoing peers connections for example.
No backport needed.
In order to authorize call of appctx_wakeup on running task:
- from within the task handler itself.
- in futur, from another thread.
The appctx is considered paused as default after running the handler.
The handler should explicitly call appctx_wakeup to be re-called.
When the appctx_free is called on a running handler. The real
free is postponed at the end of the handler process.
It's more efficient this way, as it allows to flush a send buffer before
receiving data in the other one. This can lead to a slightly faster buffer
recycling, thus slightly less memory and a small performance increase by
using a hotter cache.
In order to implement hot-pluggable applets like we'll need for HTTP/2
which will speak a different protocol than the expected one, it will be
mandatory to be able to clear all analysers from the request and response
channel and/or to keep only the ones the applet initializer installed.
Unfortunately for now in sess_establish() we systematically place a number
of analysers inherited from the frontend, backend and some hard-coded ones.
This patch reuses the now unused SF_TUNNEL flag on the stream to indicate
we're dealing with a tunnel and don't want to add more analysers anymore.
It will be usable to install such a specific applet.
Ideally over the long term it might be nice to be able to set the mode on
the stream instead of the proxy so that we can decide to change a stream's
mode (eg: TCP, HTTP, HTTP/2) at run time. But it would require many more
changes for a gain which is not yet obvious.
This is used to retrieve the TLS ALPN information from a connection. We
also support a fallback to NPN if ALPN doesn't find anything or is not
available on the existing implementation. It happens that depending on
the library version, either one or the other is available. NPN was
present in openssl 1.0.1 (very common) while ALPN is in 1.0.2 and onwards
(still uncommon at the time of writing). Clients are used to send either
one or the other to ensure a smooth transition.
For HTTP/2 we'll have to choose the upper layer based on the
advertised protocol name here and we want to keep debugging,
so let's move debugging earlier.
It doesn't make sense that stream_new() doesn't sets the target nor
analysers and that the caller has to do it even if it doesn't know
about streams (eg: in session_accept_fd()). This causes trouble for
H2 where the applet handling the protocol cannot properly change
these information during its init phase.
Let's ensure it's always set and that the callers don't set it anymore.
Note: peers and lua don't use analysers and that's properly handled.
The task_wakeup was called on stream_new, but the task/stream
wasn't fully initialized yet. The task_wakeup must be called
explicitly by the caller once the task/stream is initialized.
In order to authorize call of task_wakeup on running task:
- from within the task handler itself.
- in futur, from another thread.
The lookups on runqueue and waitqueue are re-worked
to prepare multithread stuff.
If task_wakeup is called on a running task, the woken
message flags are savec in the 'pending_state' attribute of
the state. The real wakeup is postponed at the end of the handler
process and the woken messages are copied from pending_state
to the state attribute of the task.
It's important to note that this change will cause a very minor
(though measurable) performance loss but it is necessary to make
forward progress on a multi-threaded scheduler. Most users won't
ever notice.
Mathias Weiersmueller reported an interesting issue with logs which Lukas
diagnosed as dating back from commit 9b061e332 (1.5-dev9). When front
connection information (ip, port) are logged in TCP mode and the log is
emitted at the end of the connection (eg: because %B or any log tag
requiring LW_BYTES is set), the log is emitted after the connection is
closed, so the address and ports cannot be retrieved anymore.
It could be argued that we'd make a special case of these to immediatly
retrieve the source and destination addresses from the connection, but it
seems cleaner to simply pin the front connection, marking it "tracked" by
adding the LW_XPRT flag to mention that we'll need some of these elements
at the last moment. Only LW_FRTIP and LW_CLIP are affected. Note that after
this change, LW_FRTIP could simply be removed as it's not used anywhere.
Note that the problem doesn't happen when using %[src] or %[dst] since
all sample expressions set LW_XPRT.
This must be backported to 1.7, 1.6 and 1.5.
We cannot store more than 32K headers in the structure hdr_idx, because
internaly we use signed short integers. To avoid any bugs (due to an integers
overflow), a check has been added on tune.http.maxhdr to be sure to not set a
value greater than 32767 and lower than 1 (because this is a nonsense to set
this parameter to a value <= 0).
The documentation has been updated accordingly.
This patch can be backported in 1.7, 1.6 and 1.5.
When a peer task has sent a synchronization request to remote peers
its next expiration date was updated based on a resynchronization timeout
value which itself may have already expired leading the underlying
poller to wait for 0ms during a fraction of second (consuming high CPU
resources).
With this patch we update such peer task expiration dates only if
the resynchronization timeout is not already expired.
Thanks to Patrick Hemmer who reported an issue with nice traces
which helped in finding this one.
This patch may be backported to 1.7 and 1.6.
When starting the master worker with -sf or -st, the PIDs will be reused
on the next reload, which is a problem if new processes on the system
took those PIDs.
This patch ensures that we don't register old PIDs in the reload system
when launching the master worker.
Don't copy the -x argument anymore in copy_argv() since it's already
allocated in mworker_reload().
Make the copy_argv() more consistent when used with multiple arguments
to strip.
It prevents multiple -x on reload, which is not supported.
This patch fixes a segfault in the command line parser.
When haproxy is launched with -x with no argument and -x is the latest
option in argv it segfaults.
Use usage() insteads of exit() on error.
James Brown reported some cases where a race condition happens between
the old and the new processes resulting in the leaving process removing
a newly bound unix socket. Jeff gave all the details he observed here :
https://www.mail-archive.com/haproxy@formilux.org/msg25001.html
The unix socket removal was an attempt at an optimal cleanup, which
almost never works anyway since the process is supposed to be chrooted.
And in the rare cases where it works it occasionally creates trouble.
There was already a workaround in place to avoid removing this socket
when it's been inherited from a parent's file descriptor.
So let's finally kill this useless stuff now to definitely get rid of
this persistent problem.
This fix should be backported to all stable releases.
A peer session which has just been created upon reconnect timeout expirations,
could be right after shutdown (at peer session level) because the remote
side peer could also righ after have connected. In such a case the underlying
TCP session was still running (connect()/accept()) and finally left in CLOSE_WAIT
state after the remote side stopped writting (shutdown(SHUT_WR)).
Now on, with this patch we never shutdown such peer sessions wich have just
been created. We leave them connect to the remote peer which is already
connected and must shutdown its own peer session.
Thanks to Patric Hemmer and Yves Lafon at w3.org for reporting this issue,
and for having tested this patch on the field.
Thanks also to Willy and Yelp blogs which helped me a lot in fixing it
(see https://www.haproxy.com/blog/truly-seamless-reloads-with-haproxy-no-more-hacks/ and
https://engineeringblog.yelp.com/2015/04/true-zero-downtime-haproxy-reloads.htmll).
A filter can choose to loop when a HTTP message is in the state
HTTP_MSG_ENDING. But the transaction is terminated with an error if the input is
closed (CF_SHUTR set on the channel). At this step, we have received all data,
so we can wait.
So now, we also check the parser state before leaving. This fix only affects
configs that use a filter that can wait in http_forward_data or http_end
callbacks, when all data were parsed.
For openssl 1.0.2, SSLv3_server_method and SSLv3_client_method are undefined if
OPENSSL_NO_SSL3_METHOD is set. So we must add a check on this macro before using
these functions.
For an ACL, we can load patterns from a map using the flag -M. For example:
acl test hdr(host) -M -f hosts.map
The file is parsed as a map et the ACL will be executed as expected. But the
reference flag is wrong. It is set to PAT_REF_ACL. So the map will never be
listed by a "show map" on the stat socket. Setting the reference flag to
PAT_REF_ACL|PAT_REF_MAP fixes the bug.
Jean Lubatti reported a crash on haproxy using a config involving cookies
and tarpit rules. It just happens that since 1.7-dev3 with commit 83a2c3d
("BUG/MINOR : allow to log cookie for tarpit and denied request"), function
manage_client_side_cookies() was called after erasing the request buffer in
case of a tarpit action. The problem is that this function must absolutely
not be called with an empty buffer since it moves parts of it. A typical
reproducer consists in sending :
"GET / HTTP/1.1\r\nCookie: S=1\r\n\r\n"
On such a config :
listen crash
bind :8001
mode http
reqitarpit .
cookie S insert indirect
server s1 127.0.0.1:8000 cookie 1
The fix simply consists in moving the call to the function before the call
to buffer_erase().
Many thanks to Jean for testing instrumented code and providing a usable
core.
This fix must be backported to all stable versions since the fix introducing
this bug was backported as well.
Commit cb11fd2 ("MEDIUM: mworker: wait mode on reload failure")
introduced a regression, when HAProxy is used in daemon mode, it exits 1
after forking its children.
HAProxy should exit(0), the exit(EXIT_FAILURE) was expected to be use
when the master fail in master-worker mode.
Thanks to Emmanuel Hocdet for reporting this bug. No backport needed.
The commit 201c07f68 ("MAJOR/REORG: dns: DNS resolution task and
requester queues") introduces a warning during compilation:
src/dns.c: In function ‘dns_resolve_recv’:
src/dns.c:487:6: warning: ‘need_resend’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (need_resend) {
^
This patch initialize the variable and remove the comment about it.
The commit 872f9c213 ("MEDIUM: ssl: add basic support for OpenSSL crypto
engine") broke the build without openssl support.
The ssl_free_dh() function is not defined when USE_OPENSSL is not
defined and leads to a compilation failure.
This patch modifies the way to re-enable the connection from the async fd
handler calling conn_update_sock_polling instead of the conn_fd_handler.
It also ensures that the polling is really stopped on the async fd.
The Openssl's ASYNC API does'nt support moving buffers on SSL_read/write
This patch disables the ASYNC mode dynamically when the handshake
is left and re-enables it on reneg.
This patch ensure that the ASYNC fd handlers won't be wake up
too early, disabling the event cache for this fd on connection close
and when a WANT_ASYNC is rised by Openssl.
The calls to SSL_read/SSL_write/SSL_do_handshake before rising a real read
event from the ASYNC fd, generated an EAGAIN followed by a context switch
for some engines, or a blocked read for the others.
On connection close it resulted in a too early call to SSL_free followed
by a segmentation fault.
SSL/TLS version can be changed per certificat if and only if openssl lib support
earlier callback on handshake and, of course, is implemented in haproxy. It's ok
for BoringSSL. For Openssl, version 1.1.1 have such callback and could support it.
This patch cleanup the usage of set_version func with a more suitable name:
ctx_set_version. It introduce ssl_set_version func (unused for the moment).
Very early in the connection rework process leading to v1.5-dev12, commit
56a77e5 ("MEDIUM: connection: complete the polling cleanups") marked the
end of use for this flag which since was never set anymore, but it continues
to be tested. Let's kill it now.
When dumping data at various places in the code, it's hard to figure
what is present where. To make this easier, this patch slightly modifies
debug_hexdump() to take a prefix string which is prepended in front of
each output line.
This patch is a major upgrade of the internal run-time DNS resolver in
HAProxy and it brings the following 2 main changes:
1. DNS resolution task
Up to now, DNS resolution was triggered by the health check task.
From now, DNS resolution task is autonomous. It is started by HAProxy
right after the scheduler is available and it is woken either when a
network IO occurs for one of its nameserver or when a timeout is
matched.
From now, this means we can enable DNS resolution for a server without
enabling health checking.
2. Introduction of a dns_requester structure
Up to now, DNS resolution was purposely made for resolving server
hostnames.
The idea, is to ensure that any HAProxy internal object should be able
to trigger a DNS resolution. For this purpose, 2 things has to be done:
- clean up the DNS code from the server structure (this was already
quite clean actually) and clean up the server's callbacks from
manipulating too much DNS resolution
- create an agnostic structure which allows linking a DNS resolution
and a requester of any type (using obj_type enum)
3. Manage requesters through queues
Up to now, there was an uniq relationship between a resolution and it's
owner (aka the requester now). It's a shame, because in some cases,
multiple objects may share the same hostname and may benefit from a
resolution being performed by a third party.
This patch introduces the notion of queues, which are basically lists of
either currently running resolution or waiting ones.
The resolutions are now available as a pool, which belongs to the resolvers.
The pool has has a default size of 64 resolutions per resolvers and is
allocated at configuration parsing.
This patch introduces a bit of roundrobin in the records stored in our
local cache.
Purpose is to allow some kind of distribution of the IPs found in a
response.
Note that distribution properly applies only when the IP used by many
requesters disappear and is replaced by an other one.
ancount is the number of answers available in a DNS response.
Before this patch, HAProxy used to store the ancount found in the buffer
(sent by the DNS server).
Unfortunately, this is now inaccurate and does not correspond to the
number of records effectively stored in our local version of the
response. In Example, the CNAMEs are not stored.
This patch updates ancount field in to make it match what is effectively
stored in our version.
Introduction of a DNS response LRU cache in HAProxy.
When a positive response is received from a DNS server, HAProxy stores
it in the struct resolution and then also populates a LRU cache with the
response.
For now, the key in the cache is a XXHASH64 of the hostname in the
domain name format concatened to the query type in string format.
Prior this patch, the DNS responses were stored in a pre-allocated
memory area (allocated at HAProxy's startup).
The problem is that this memory is erased for each new DNS responses
received and processed.
This patch removes the global memory allocation (which was not thread
safe by the way) and introduces a storage of the dns response in the
struct
resolution.
The memory in the struct resolution is also reserved at start up and is
thread safe, since each resolution structure will have its own memory
area.
For now, we simply store the response and use it atomically per
response per server.
In the process of breaking links between dns_* functions and other
structures (mainly server and a bit of resolution), the function
dns_get_ip_from_response needs to be reworked: it now can call
"callback" functions based on resolution's owner type to allow modifying
the way the response is processed.
For now, main purpose of the callback function is to check that an IP
address is not already affected to an element of the same type.
For now, only server type has a callback.
This patch introduces a some re-organisation around the DNS code in
HAProxy.
1. make the dns_* functions less dependent on 'struct server' and 'struct resolution'.
With this in mind, the following changes were performed:
- 'struct dns_options' has been removed from 'struct resolution' (well,
we might need it back at some point later, we'll see)
==> we'll use the 'struct dns_options' from the owner of the resolution
- dns_get_ip_from_response(): takes a 'struct dns_options' instead of
'struct resolution'
==> so the caller can pass its own dns options to get the most
appropriate IP from the response
- dns_process_resolve(): struct dns_option is deduced from new
resolution->requester_type parameter
2. add hostname_dn and hostname_dn_len into struct server
In order to avoid recomputing a server's hostname into its domain name
format (and use a trash buffer to store the result), it is safer to
compute it once at configuration parsing and to store it into the struct
server.
In the mean time, the struct resolution linked to the server doesn't
need anymore to store the hostname in domain name format. A simple
pointer to the server one will make the trick.
The function srv_alloc_dns_resolution() properly manages everything for
us: memory allocation, pointer updates, etc...
3. move resolvers pointer into struct server
This patch makes the pointer to struct dns_resolvers from struct
dns_resolution obsolete.
Purpose is to make the resolution as "neutral" as possible and since the
requester is already linked to the resolvers, then we don't need this
information anymore in the resolution itself.
A couple of new functions to allocate and free memory for a DNS
resolution structure. Main purpose is to to make the code related to DNS
more consistent.
They allocate or free memory for the structure itself. Later, if needed,
they should also allocate / free the buffers, etc, used by this structure.
They don't set/unset any parameters, this is the role of the caller.
This patch also implement calls to these function eveywhere it is
required.
The default len of request uri in log messages is 1024. In some use
cases, you need to keep the long trail of GET parameters. The only
way to increase this len is to recompile with DEFINE=-DREQURI_LEN=2048.
This commit introduces a tune.http.logurilen configuration directive,
allowing to tune this at runtime.
This patch ensure that the children will exit when the master quits,
even if the master didn't send any signal.
The master and the workers are connected through a pipe, when the pipe
closes the children leave.
This option exits every workers when one of the current workers die.
It allows you to monitor the master process in order to relaunch
everything on a failure.
For example it can be used with systemd and Restart=on-failure in a spec
file.
In master worker mode, you can't specify the stats socket where you get
your listeners FDs on a reload, because the command line of the re-exec
is launched by the master.
To solve the problem, when -x is found on the command line, its
parameter is rewritten on a reexec with the first stats socket with the
capability to send sockets. It tries to reuse the original parameter if
it has this capability.
In Master Worker mode, when the reloading of the configuration fail,
the process is exiting leaving the children without their father.
To handle this, we register an exit function with atexit(3), which is
reexecuting the binary in a special mode. This particular mode of
HAProxy don't reload the configuration, it only loops on wait().
The master-worker will reload itself on SIGUSR2/SIGHUP
It's inherited from the systemd wrapper, when the SIGUSR2 signal is
received, the master process will reexecute itself with the -sf flag
followed by the PIDs of the children.
In the systemd wrapper, the children were using a pipe to notify when
the config has been parsed and when the new process is ready. The goal
was to ensure that the process couldn't reload during the parsing of the
configuration, before signals were send to old process.
With the new mworker model, the master parses the configuration and is
aware of all the children. We don't need a pipe, but we need to block
those signals before the end of a reload, to ensure that the process
won't be killed during a reload.
The SIGUSR1 signal is forwarded to the children to soft-stop HAProxy.
The SIGTERM and SIGINT signals are forwarded to the children in order to
terminate them.
This commit remove the -Ds systemd mode in HAProxy in order to replace
it by a more generic master worker system. It aims to replace entirely
the systemd wrapper in the near future.
The master worker mode implements a new way of managing HAProxy
processes. The master is in charge of parsing the configuration
file and is responsible for spawning child processes.
The master worker mode can be invoked by using the -W flag. It can be
used either in background mode (-D) or foreground mode. When used in
background mode, the master will fork to daemonize.
In master worker background mode, chroot, setuid and setgid are done in
each child rather than in the master process, because the master process
will still need access to filesystem to reload the configuration.
This patch adds the support of a maximum of 32 engines
in async mode.
Some tests have been done using 2 engines simultaneously.
This patch also removes specific 'async' attribute from the connection
structure. All the code relies only on Openssl functions.
ssl-mode-async is a global configuration parameter which enables
asynchronous processing in OPENSSL for all SSL connections haproxy
handles. With SSL_MODE_ASYNC set, TLS I/O operations may indicate a
retry with SSL_ERROR_WANT_ASYNC with this mode set if an asynchronous
capable engine is used to perform cryptographic operations. Currently
async mode only supports one async-capable engine.
This is the latest version of the patchset which includes Emeric's
updates :
- improved async fd cleaning when openssl reports an fd to delete
- prevent conn_fd_handler from calling SSL_{read,write,handshake} until
the async fd is ready, as these operations are very slow and waste CPU
- postpone of SSL_free to ensure the async operation can complete and
does not cause a dereference a released SSL.
- proper removal of async fd from the fdtab and removal of the unused async
flag.
This patch adds the global 'ssl-engine' keyword. First arg is an engine
identifier followed by a list of default_algorithms the engine will
operate.
If the openssl version is too old, an error is reported when the option
is used.
When HAProxy is running with multiple processes and some listeners
arebound to processes, the unused sockets were not closed in the other
processes. The aim was to be able to send those listening sockets using
the -x option.
However to ensure the previous behavior which was to close those
sockets, we provided the "no-unused-socket" global option.
This patch changes this behavior, it will close unused sockets which are
not in the same process as an expose-fd socket, making the
"no-unused-socket" option useless.
The "no-unused-socket" option was removed in this patch.
This patch changes the stats socket rights for allowing the sending of
listening sockets.
The previous behavior was to allow any unix stats socket with admin
level to send sockets. It's not possible anymore, you have to set this
option to activate the socket sending.
Example:
stats socket /var/run/haproxy4.sock mode 666 expose-fd listeners level user process 4
The current level variable use only 2 bits for storing the 3 access
level (user, oper and admin).
This patch add a bitmask which allows to use the remaining bits for
other usage.
In the case of a Lua sample-fetch or converter doesn't return any
value, an acces outside the Lua stack can be performed. This patch
check the stack size before converting the top value to a HAProxy
internal sample.
A workaround consist to check that a value value is always returned
with sample fetches and converters.
This patch should be backported in the version 1.6 and 1.7
Add "b64dec" as a new converter which can be used to decode a base64
encoded string into its binary representation. It performs the inverse
operation of the "base64" converter.
Some DNS related network sockets were closed without unregistering their file
descriptors from their underlying kqueue event sets. This patch replaces calls to
close() by fd_delete() calls to that to delete such events attached to DNS
network sockets from the kqueue before closing the sockets.
The bug was introduced by commit 26c6eb8 ("BUG/MAJOR: dns: restart sockets
after fork()") which was backported in 1.7 so this fix has to be backported
there as well.
Thanks to Jim Pingle who reported it and indicated the faulty commit, and
to Lukas Tribus for the trace showing the bad file descriptor.
In haproxy < 1.8, no-sslv3/no-tlsv1x are ignored when force-sslv3/force-tlsv1x
is used (without warning). With this patch, no-sslv3/no-tlsv1x are ignored when
ssl-min-ver or ssl-max-ver is used (with warning).
When all SSL/TLS versions are disable: generate an error, not a warning.
example: ssl-min-ver TLSV1.3 (or force-tlsv13) with a openssl <= 1.1.0.
'ssl-min-ver' and 'ssl-max-ver' with argument SSLv3, TLSv1.0, TLSv1.1, TLSv1.2
or TLSv1.3 limit the SSL negotiation version to a continuous range. ssl-min-ver
and ssl-max-ver should be used in replacement of no-tls* and no-sslv3. Warning
and documentation are set accordingly.
Plan is to add min-tlsxx max-tlsxx configuration, more consistent than no-tlsxx.
Find the real min/max versions (openssl capabilities and haproxy configuration)
and generate warning with bad versions range.
'no-tlsxx' can generate 'holes':
"The list of protocols available can be further limited using the SSL_OP_NO_X
options of the SSL_CTX_set_options or SSL_set_options functions. Clients should
avoid creating 'holes' in the set of protocols they support, when disabling a
protocol, make sure that you also disable either all previous or all subsequent
protocol versions. In clients, when a protocol version is disabled without
disabling all previous protocol versions, the effect is to also disable all
subsequent protocol versions."
To not break compatibility, "holes" is authorized with warning, because openssl
1.1.0 and boringssl deal with it (keep the upper or lower range depending the
case and version).
Plan is to add min-tlsxx max-tlsxx configuration, more consistent than no-tlsxx.
This patch introduce internal min/max and replace force-tlsxx implementation.
SSL method configuration is store in 'struct tls_version_filter'.
SSL method configuration to openssl setting is abstract in 'methodVersions' table.
With openssl < 1.1.0, SSL_CTX_set_ssl_version is used for force (min == max).
With openssl >= 1.1.0, SSL_CTX_set_min/max_proto_version is used.
Plan is to add min-tlsxx max-tlsxx configuration, more consistent than no-tlsxx.
min-tlsxx and max-tlsxx can be overwrite on local definition. This directives
should be the only ones needed in default-server.
To simplify next patches (rework of tls versions settings with min/max) all
ssl/tls version settings relative to default-server are reverted first:
remove: 'sslv3', 'tls*', 'no-force-sslv3', 'no-force-tls*'.
remove from default-server: 'no-sslv3', 'no-tls*'.
Note:
. force-tlsxx == min-tlsxx + max-tlsxx : would be ok in default-server.
. no-tlsxx is keep for compatibility: should not be propagated to default-server.
James Brown reported that agent-check mistakenly sends the proxy
protocol header when it's configured. This is obviously wrong as
the agent is an independant servie and not a traffic port, let's
disable this.
This fix must be backported to 1.7 and possibly 1.6.
This patch adds a new stats socket command to modify server
FQDNs at run time.
Its syntax:
set server <backend>/<server> fqdn <FQDN>
This patch also adds FQDNs to server state file at the end
of each line for backward compatibility ("-" if not present).
This patch replaces the calls to TLSvX_X_client/server/_method
by the new TLS_client/server_method and it uses the new functions
SSL_set_min_proto_version and SSL_set_max_proto_version, setting them
at the wanted protocol version using 'force-' statements.
The sample fetch returns all headers including the last jump line.
The last jump line is used to determine if the block of headers is
truncated or not.
These encoding functions does general stuff and can be used in
other context than spoe. This patch moves the function spoe_encode_varint
and spoe_decode_varint from spoe to common. It also remove the prefix spoe.
These functions will be used for encoding values in new binary sample fetch.
in chash_get_server_hash, we find the nearest server entries both
before and after the request hash. If the next and prev entries both
point to the same server, the function would exit early and return that
server, to save work.
Before hash-balance-factor this was a valid optimization -- one of nsrv
and psrv would definitely be chosen, so if they are the same there's no
need to choose between them. But with hash-balance-factor it's possible
that adding another request to that server would overload it
(chash_server_is_eligible returns false) and we go further around the
ring. So it's not valid to return before checking for that.
This commit simply removes the early return, as it provides a minimal
savings even when it's correct.
The priv context is not cleaned when we set a new priv context.
This is caused by a stupid swap between two parameter of the
luaL_unref() function.
workaround: use set_priv only once when we process a stream.
This patch should be backported in version 1.7 and 1.6
This patch adds server_template_init() function used to initialize servers
from server templates. It is called just after having parsed a 'server-template'
line.
This patch makes backend sections support 'server-template' new keyword.
Such 'server-template' objects are parsed similarly to a 'server' object
by parse_server() function, but its first arguments are as follows:
server-template <ID prefix> <nb | range> <ip | fqdn>:<port> ...
The remaining arguments are the same as for 'server' lines.
With such server template declarations, servers may be allocated with IDs
built from <ID prefix> and <nb | range> arguments.
For instance declaring:
server-template foo 1-5 google.com:80 ...
or
server-template foo 5 google.com:80 ...
would be equivalent to declare:
server foo1 google.com:80 ...
server foo2 google.com:80 ...
server foo3 google.com:80 ...
server foo4 google.com:80 ...
server foo5 google.com:80 ...
This patch moves the code which is responsible of finalizing server initializations
after having fully parsed a 'server' line (health-check, agent check and SNI expression
initializations) from parse_server() to new functions.
This patch moves the code responsible of copying default server settings
to a new server instance from parse_server() function to new defsrv_*_cpy()
functions which may be used both during server lines parsing and during server
templates initializations to come.
These defsrv_*_cpy() do not make any reference to anything else than default
server settings.
'resolvers' setting was not duplicated from default server setting to
new server instances when parsing 'server' lines.
This fix is simple: strdup() default resolvers <id> string argument after
having allocated a new server when parsing 'server' lines.
This patch must be backported to 1.7 and 1.6.
This bug occurs when a redirect rule is applied during the request analysis on a
persistent connection, on a proxy without any server. This means, in a frontend
section or in a listen/backend section with no "server" line.
Because the transaction processing is shortened, no server can be selected to
perform the connection. So if we try to establish it, this fails and a 503 error
is returned, while a 3XX was already sent. So, in this case, HAProxy generates 2
replies and only the first one is expected.
Here is the configuration snippet to easily reproduce the problem:
listen www
bind :8080
mode http
timeout connect 5s
timeout client 3s
timeout server 6s
redirect location /
A simple HTTP/1.1 request without body will trigger the bug:
$ telnet 0 8080
Trying 0.0.0.0...
Connected to 0.
Escape character is '^]'.
GET / HTTP/1.1
HTTP/1.1 302 Found
Cache-Control: no-cache
Content-length: 0
Location: /
HTTP/1.0 503 Service Unavailable
Cache-Control: no-cache
Connection: close
Content-Type: text/html
<html><body><h1>503 Service Unavailable</h1>
No server is available to handle this request.
</body></html>
Connection closed by foreign host.
[wt: only 1.8-dev is impacted though the bug is present in older ones]
In server_parse_sni_expr(), we use the "proxy" global variable, when we
should probably be using "px" given as an argument.
It happens to work by accident right now, but may not in the future.
[wt: better backport it]
Overall we do have an issue with the severity of a number of errors. Most
fatal errors are reported with ERR_FATAL (which prevents startup) and not
ERR_ABORT (which stops parsing ASAP), but check_config_validity() is still
called on ERR_FATAL, and will most of the time report bogus errors. This
is what caused smp_resolve_args() to be called on a number of unparsable
ACLs, and it also is what reports incorrect ordering or unresolvable
section names when certain entries could not be properly parsed.
This patch stops this domino effect by simply aborting before trying to
further check and resolve the configuration when it's already know that
there are fatal errors.
A concrete example comes from this config :
userlist users :
user foo insecure-password bar
listen foo
bind :1234
mode htttp
timeout client 10S
timeout server 10s
timeout connect 10s
stats uri /stats
stats http-request auth unless { http_auth(users) }
http-request redirect location /index.html if { path / }
It contains a colon after the userlist name, a typo in the client timeout value,
another one in "mode http" which cause some other configuration elements not to
be properly handled.
Previously it would confusingly report :
[ALERT] 108/114851 (20224) : parsing [err-report.cfg:1] : 'userlist' cannot handle unexpected argument ':'.
[ALERT] 108/114851 (20224) : parsing [err-report.cfg:6] : unknown proxy mode 'htttp'.
[ALERT] 108/114851 (20224) : parsing [err-report.cfg:7] : unexpected character 'S' in 'timeout client'
[ALERT] 108/114851 (20224) : Error(s) found in configuration file : err-report.cfg
[ALERT] 108/114851 (20224) : parsing [err-report.cfg:11] : unable to find userlist 'users' referenced in arg 1 of ACL keyword 'http_auth' in proxy 'foo'.
[WARNING] 108/114851 (20224) : config : missing timeouts for proxy 'foo'.
| While not properly invalid, you will certainly encounter various problems
| with such a configuration. To fix this, please ensure that all following
| timeouts are set to a non-zero value: 'client', 'connect', 'server'.
[WARNING] 108/114851 (20224) : config : 'stats' statement ignored for proxy 'foo' as it requires HTTP mode.
[WARNING] 108/114851 (20224) : config : 'http-request' rules ignored for proxy 'foo' as they require HTTP mode.
[ALERT] 108/114851 (20224) : Fatal errors found in configuration.
The "requires HTTP mode" errors are just pollution resulting from the
improper spelling of this mode earlier. The unresolved reference to the
userlist is caused by the extra colon on the declaration, and the warning
regarding the missing timeouts is caused by the wrong character.
Now it more accurately reports :
[ALERT] 108/114900 (20225) : parsing [err-report.cfg:1] : 'userlist' cannot handle unexpected argument ':'.
[ALERT] 108/114900 (20225) : parsing [err-report.cfg:6] : unknown proxy mode 'htttp'.
[ALERT] 108/114900 (20225) : parsing [err-report.cfg:7] : unexpected character 'S' in 'timeout client'
[ALERT] 108/114900 (20225) : Error(s) found in configuration file : err-report.cfg
[ALERT] 108/114900 (20225) : Fatal errors found in configuration.
Despite not really a fix, this patch should be backported at least to 1.7,
possibly even 1.6, and 1.5 since it hardens the config parser against
certain bad situations like the recently reported use-after-free and the
last null dereference.
Stephan Zeisberg reported another dirty abort case which can be triggered
with this simple config (where file "d" doesn't exist) :
backend b1
stats auth a:b
acl auth_ok http_auth(c) -f d
This issue was brought in 1.5-dev9 by commit 34db108 ("MAJOR: acl: make use
of the new argument parsing framework") when prune_acl_expr() started to
release arguments. The arg pointer is set to NULL but not its length.
Because of this, later in smp_resolve_args(), the argument is still seen
as valid (since only a test on the length is made as in all other places),
and the NULL pointer is dereferenced.
This patch properly clears the lengths to avoid such tests.
This fix needs to be backported to 1.7, 1.6, and 1.5.
Any valid keyword could not be parsed anymore if provided after 'source' keyword.
This was due to the fact that 'source' number of arguments is variable.
So, as its parser srv_parse_source() is the only one who may know how many arguments
was provided after 'source' keyword, it updates 'cur_arg' variable (the index
in the line of the current arg to be parsed), this is a good thing.
This variable is also incremented by one (to skip the 'source' keyword).
This patch disable this behavior.
Should have come with dba9707 commit.
'usesrc' setting is not permitted on 'server' lines if not provided after
'source' setting. This is now also the case on 'default-server' lines.
Without this patch parse_server() parser displayed that 'usersrc' is
an unknown keyword.
Should have come with dba9707 commit.
Make the systemd wrapper chech if HAPROXY_STATS_SOCKET if set.
If set, it will use it as an argument to the "-x" option, which makes
haproxy asks for any listening socket, on the stats socket, in order
to achieve reloads with no new connection lost.
When running with multiple process, if some proxies are just assigned
to some processes, the other processes will just close the file descriptors
for the listening sockets. However, we may still have to provide those
sockets when reloading, so instead we just try hard to pretend those proxies
are dead, while keeping the sockets opened.
A new global option, no-reused-socket", has been added, to restore the old
behavior of closing the sockets not bound to this process.
Try to reuse any socket from the old process, provided by the "-x" flag,
before binding a new one, assuming it is compatible.
"Compatible" here means same address and port, same namspace if any,
same interface if any, and that the following flags are the same :
LI_O_FOREIGN, LI_O_V6ONLY and LI_O_V4V6.
Also change tcp_bind_listener() to always enable/disable socket options,
instead of just doing so if it is in the configuration file, as the option
may have been removed, ie TCP_FASTOPEN may have been set in the old process,
and removed from the new configuration, so we have to disable it.
Add the "-x" flag, that takes a path to a unix socket as an argument. If
used, haproxy will connect to the socket, and asks to get all the
listening sockets from the old process. Any failure is fatal.
This is needed to get seamless reloads on linux.
Add a new command that will send all the listening sockets, via the
stats socket, and their properties.
This is a first step to workaround the linux problem when reloading
haproxy.
luaL_setstate() uses malloc() to initialize the first objects, and only
after this we replace the allocator. This creates trouble when replacing
the standard memory allocators during debugging sessions since the new
allocator is used to realloc() an area previously allocated using the
default malloc().
Lua provides lua_newstate() in addition to luaL_newstate(), which takes
an allocator for the initial malloc. This is exactly what we need, and
this patch does this and fixes the problem. The now useless call to
lua_setallocf() could be removed.
This has no impact outside of debugging sessions and there's no need to
backport this.
This reverts commit 266b1a8 ("MEDIUM: server: Inherit CLI weight changes and
agent-check weight responses") from Michal Idzikowski, which is still broken.
It stops propagating weights at the first error encountered, leaving servers
in a random state depending on what LB algorithms are used on other servers
tracking the one experiencing the weight change. It's unsure what the best
way to address this is, but we cannot leave the servers in an inconsistent
state between farms. For example :
backend site1
mode http
balance uri
hash-type consistent
server s1 127.0.0.1:8001 weight 10 track servers/s1
backend site2
mode http
balance uri
server s1 127.0.0.1:8001 weight 10 track servers/s1
backend site3
mode http
balance uri
hash-type consistent
server s1 127.0.0.1:8001 weight 10 track servers/s1
backend servers
server s1 127.0.0.1:8001 weight 10 check inter 1s
The weight change is applied on "servers/s1". It tries to propagate
to the servers tracking it, which are site1/s1, site2/s1 and site3/s1.
Let's say that "weight 50%" is requested. The servers are linked in
reverse-order, so the change is applied to "servers/s1", then to
"site3/s1", then to "site2/s1" and this one fails and rejects the
change. The change is aborted and never propagated to "site1/s1",
which keeps the server in a different state from "site3/s1". At the
very least, in case of error, the changes should probably be unrolled.
Also the error reported on the CLI (when changing from the CLI) simply says :
Backend is using a static LB algorithm and only accepts weights '0%' and '100%'.
Without more indications what the faulty backend is.
Let's revert this change for now, as initially feared it will definitely
cause more harm than good and at least needs to be revisited. It was never
backported to any stable branch so no backport is needed.
In case of error it's very difficult to properly unroll the list of
unresolved args because the error can appear on any argument, and all
of them share the same memory area, pointed to by one or multiple links
from the global args list. The problem is that till now the arguments
themselves were released and were not unlinked from the list, causing
all forms of corruption in deinit() when quitting on the error path if
an argument couldn't properly parse.
A few attempts at trying to selectively spot the appropriate list entries
to kill before releasing the shared area have only resulted in complicating
the code and pushing the issue further.
Here instead we use a simple conservative approach : prune_acl_expr()
only tries to free the argument array if none of the arguments were
unresolved, which means that none of them was added to the arg list.
It's unclear what a better approach would be. We could imagine that
args would point to their own location in the shared list but given
that this extra cost and complexity would be added exclusively in
order to cleanly release everything when we're exiting due to a config
parse error, this seems quite overkill.
This bug was noticed on 1.7 and likely affects 1.6 and 1.5, so the fix
should be backported. It's not easy to reproduce it, as the reproducers
randomly work depending on how memory is allocated. One way to do it is
to use parsable and non-parsable patterns on an ACL making use of args.
Big thanks to Stephan Zeisberg for reporting this problem with a working
reproducer.
If make_arg_list() fails to process an argument after having queued an
unresolvable one, it frees the allocated argument list but doesn't remove
the referenced args from the arg list. This causes a use after free or a
double free if the same location was reused, during the deinit phase upon
exit after reporting the error.
Since it's not easy to properly unlinked all elements, we only release the
args block if none of them was queued in the list.
When agent-check or CLI command executes relative weight change this patch
propagates it to tracking server allowing grouping many backends running on
same server underneath. Additionaly in case with many src IPs many backends
can have shared state checker, so there won't be unnecessary health checks.
[wt: Note: this will induce some behaviour change on some setups]
Take care of arg_list_clone() returning NULL in arg_list_add() since
the former does it too. It's only used during parsing so the impact
is very low.
Can be backported to 1.7, 1.6 and 1.5.
The error doesn't prevent checking for other errors after an invalid
character was detected in an ACL name. Better quit ASAP to avoid risking
to emit garbled and confusing error messages if something else fails on
the same line.
This should be backported to 1.7, 1.6 and 1.5.
AF_INET address family was always used to create sockets to connect
to name servers. This prevented any connection over IPv6 from working.
This fix must be backported to 1.7 and 1.6.
Commit 0ebb511 ("MINOR: tools: add a generic hexdump function for debugging")
introduced debug_hexdump() which is used to dump a memory area during
debugging sessions. This function can start at an unaligned offset and
uses a signed comparison to know where to start dumping from. But the
operation mixes signed and unsigned, making the test incorrect and causing
the following warnings to be emitted under Clang :
src/standard.c:3775:14: warning: comparison of unsigned expression >= 0 is
always true [-Wtautological-compare]
if (b + j >= 0 && b + j < len)
~~~~~ ^ ~
Make "j" signed instead. At the moment this function is not used at all
so there's no impact. Thanks to Dmitry Sivachenko for reporting it. No
backport is needed.
Commit 05ee213 ("MEDIUM: stats: Add JSON output option to show (info|stat)")
used to pass argument "uri" to the aforementionned function which doesn't
take any. It's probably a leftover from multiple iterations of the same
patchset. Spotted by Dmitry Sivachenko. No backport is needed.
IP*_BINDANY is not defined under this system thus it is
necessary to make those fields access since CONFIG_HAP_TRANSPARENT
is not defined.
[wt: problem introduced late in 1.8-dev. The same fix was also reported
by Steven Davidovitz]
Each time we generate a dynamic cookie, we try to make sure the same
cookie hasn't been generated for another server, it's very unlikely, but
it may happen.
We only have to check that for the servers in the same proxy, no, need to
check in others, plus the code was buggy and would always check in the
first proxy of the proxy list.
Released version 1.8-dev1 with the following main changes :
- BUG/MEDIUM: proxy: return "none" and "unknown" for unknown LB algos
- BUG/MINOR: stats: make field_str() return an empty string on NULL
- DOC: Spelling fixes
- BUG/MEDIUM: http: Fix tunnel mode when the CONNECT method is used
- BUG/MINOR: http: Keep the same behavior between 1.6 and 1.7 for tunneled txn
- BUG/MINOR: filters: Protect args in macros HAS_DATA_FILTERS and IS_DATA_FILTER
- BUG/MINOR: filters: Invert evaluation order of HTTP_XFER_BODY and XFER_DATA analyzers
- BUG/MINOR: http: Call XFER_DATA analyzer when HTTP txn is switched in tunnel mode
- BUG/MAJOR: stream: fix session abort on resource shortage
- OPTIM: stream-int: don't disable polling anymore on DONT_READ
- BUG/MINOR: cli: allow the backslash to be escaped on the CLI
- BUG/MEDIUM: cli: fix "show stat resolvers" and "show tls-keys"
- DOC: Fix map table's format
- DOC: Added 51Degrees conv and fetch functions to documentation.
- BUG/MINOR: http: don't send an extra CRLF after a Set-Cookie in a redirect
- DOC: mention that req_tot is for both frontends and backends
- BUG/MEDIUM: variables: some variable name can hide another ones
- MINOR: lua: Allow argument for actions
- BUILD: rearrange target files by build time
- CLEANUP: hlua: just indent functions
- MINOR: lua: give HAProxy variable access to the applets
- BUG/MINOR: stats: fix be/sessions/max output in html stats
- MINOR: proxy: Add fe_name/be_name fetchers next to existing fe_id/be_id
- DOC: lua: Documentation about some entry missing
- DOC: lua: Add documentation about variable manipulation from applet
- MINOR: Do not forward the header "Expect: 100-continue" when the option http-buffer-request is set
- DOC: Add undocumented argument of the trace filter
- DOC: Fix some typo in SPOE documentation
- MINOR: cli: Remove useless call to bi_putchk
- BUG/MINOR: cli: be sure to always warn the cli applet when input buffer is full
- MINOR: applet: Count number of (active) applets
- MINOR: task: Rename run_queue and run_queue_cur counters
- BUG/MEDIUM: stream: Save unprocessed events for a stream
- BUG/MAJOR: Fix how the list of entities waiting for a buffer is handled
- BUILD/MEDIUM: Fixing the build using LibreSSL
- BUG/MEDIUM: lua: In some case, the return of sample-fetches is ignored (2)
- SCRIPTS: git-show-backports: fix a harmless typo
- SCRIPTS: git-show-backports: add -H to use the hash of the commit message
- BUG/MINOR: stream-int: automatically release SI_FL_WAIT_DATA on SHUTW_NOW
- CLEANUP: applet/lua: create a dedicated ->fcn entry in hlua_cli context
- CLEANUP: applet/table: add an "action" entry in ->table context
- CLEANUP: applet: remove the now unused appctx->private field
- DOC: lua: documentation about time parser functions
- DOC: lua: improve links
- DOC: lua: section declared twice
- MEDIUM: cli: 'show cli sockets' list the CLI sockets
- BUG/MINOR: cli: "show cli sockets" wouldn't list all processes
- BUG/MINOR: cli: "show cli sockets" would always report process 64
- CLEANUP: lua: rename one of the lua appctx union
- BUG/MINOR: lua/cli: bad error message
- MEDIUM: lua: use memory pool for hlua struct in applets
- MINOR: lua/signals: Remove Lua part from signals.
- DOC: cli: show cli sockets
- MINOR: cli: automatically enable a CLI I/O handler when there's no parser
- CLEANUP: memory: remove the now unused cli_parse_show_pools() function
- CLEANUP: applet: group all CLI contexts together
- CLEANUP: stats: move a misplaced stats context initialization
- MINOR: cli: add two general purpose pointers and integers in the CLI struct
- MINOR: appctx/cli: remove the cli_socket entry from the appctx union
- MINOR: appctx/cli: remove the env entry from the appctx union
- MINOR: appctx/cli: remove the "be" entry from the appctx union
- MINOR: appctx/cli: remove the "dns" entry from the appctx union
- MINOR: appctx/cli: remove the "server_state" entry from the appctx union
- MINOR: appctx/cli: remove the "tlskeys" entry from the appctx union
- CONTRIB: tcploop: add limits.h to fix build issue with some compilers
- MINOR/DOC: lua: just precise one thing
- DOC: fix small typo in fe_id (backend instead of frontend)
- BUG/MINOR: Fix the sending function in Lua's cosocket
- BUG/MINOR: lua: memory leak executing tasks
- BUG/MINOR: lua: bad return code
- BUG/MINOR: lua: memleak when Lua/cli fails
- MEDIUM: lua: remove Lua struct from session, and allocate it with memory pools
- CLEANUP: haproxy: statify unexported functions
- MINOR: haproxy: add a registration for build options
- CLEANUP: wurfl: use the build options list to report it
- CLEANUP: 51d: use the build options list to report it
- CLEANUP: da: use the build options list to report it
- CLEANUP: namespaces: use the build options list to report it
- CLEANUP: tcp: use the build options list to report transparent modes
- CLEANUP: lua: use the build options list to report it
- CLEANUP: regex: use the build options list to report the regex type
- CLEANUP: ssl: use the build options list to report the SSL details
- CLEANUP: compression: use the build options list to report the algos
- CLEANUP: auth: use the build options list to report its support
- MINOR: haproxy: add a registration for post-check functions
- CLEANUP: checks: make use of the post-init registration to start checks
- CLEANUP: filters: use the function registration to initialize all proxies
- CLEANUP: wurfl: make use of the late init registration
- CLEANUP: 51d: make use of the late init registration
- CLEANUP: da: make use of the late init registration code
- MINOR: haproxy: add a registration for post-deinit functions
- CLEANUP: wurfl: register the deinit function via the dedicated list
- CLEANUP: 51d: register the deinitialization function
- CLEANUP: da: register the deinitialization function
- CLEANUP: wurfl: move global settings out of the global section
- CLEANUP: 51d: move global settings out of the global section
- CLEANUP: da: move global settings out of the global section
- MINOR: cfgparse: add two new functions to check arguments count
- MINOR: cfgparse: move parsing of "ca-base" and "crt-base" to ssl_sock
- MEDIUM: cfgparse: move all tune.ssl.* keywords to ssl_sock
- MEDIUM: cfgparse: move maxsslconn parsing to ssl_sock
- MINOR: cfgparse: move parsing of ssl-default-{bind,server}-ciphers to ssl_sock
- MEDIUM: cfgparse: move ssl-dh-param-file parsing to ssl_sock
- MEDIUM: compression: move the zlib-specific stuff from global.h to compression.c
- BUG/MEDIUM: ssl: properly reset the reused_sess during a forced handshake
- BUG/MEDIUM: ssl: avoid double free when releasing bind_confs
- BUG/MINOR: stats: fix be/sessions/current out in typed stats
- MINOR: tcp-rules: check that the listener exists before updating its counters
- MEDIUM: spoe: don't create a dummy listener for outgoing connections
- MINOR: listener: move the transport layer pointer to the bind_conf
- MEDIUM: move listener->frontend to bind_conf->frontend
- MEDIUM: ssl: remote the proxy argument from most functions
- MINOR: connection: add a new prepare_bind_conf() entry to xprt_ops
- MEDIUM: ssl_sock: implement ssl_sock_prepare_bind_conf()
- MINOR: connection: add a new destroy_bind_conf() entry to xprt_ops
- MINOR: ssl_sock: implement ssl_sock_destroy_bind_conf()
- MINOR: server: move the use_ssl field out of the ifdef USE_OPENSSL
- MINOR: connection: add a minimal transport layer registration system
- CLEANUP: connection: remove all direct references to raw_sock and ssl_sock
- CLEANUP: connection: unexport raw_sock and ssl_sock
- MINOR: connection: add new prepare_srv()/destroy_srv() entries to xprt_ops
- MINOR: ssl_sock: implement and use prepare_srv()/destroy_srv()
- CLEANUP: ssl: move tlskeys_finalize_config() to a post_check callback
- CLEANUP: ssl: move most ssl-specific global settings to ssl_sock.c
- BUG/MINOR: backend: nbsrv() should return 0 if backend is disabled
- BUG/MEDIUM: ssl: for a handshake when server-side SNI changes
- BUG/MINOR: systemd: potential zombie processes
- DOC: Add timings events schemas
- BUILD: lua: build failed on FreeBSD.
- MINOR: samples: add xx-hash functions
- MEDIUM: regex: pcre2 support
- BUG/MINOR: option prefer-last-server must be ignored in some case
- MINOR: stats: Support "select all" for backend actions
- BUG/MINOR: sample-fetches/stick-tables: bad type for the sample fetches sc*_get_gpt0
- BUG/MAJOR: channel: Fix the definition order of channel analyzers
- BUG/MINOR: http: report real parser state in error captures
- BUILD: scripts: automatically update the branch in version.h when releasing
- MINOR: tools: add a generic hexdump function for debugging
- BUG/MAJOR: http: fix risk of getting invalid reports of bad requests
- MINOR: http: custom status reason.
- MINOR: connection: add sample fetch "fc_rcvd_proxy"
- BUG/MINOR: config: emit a warning if http-reuse is enabled with incompatible options
- BUG/MINOR: tools: fix off-by-one in port size check
- BUG/MEDIUM: server: consider AF_UNSPEC as a valid address family
- MEDIUM: server: split the address and the port into two different fields
- MINOR: tools: make str2sa_range() return the port in a separate argument
- MINOR: server: take the destination port from the port field, not the addr
- MEDIUM: server: disable protocol validations when the server doesn't resolve
- BUG/MEDIUM: tools: do not force an unresolved address to AF_INET:0.0.0.0
- BUG/MINOR: ssl: EVP_PKEY must be freed after X509_get_pubkey usage
- BUG/MINOR: ssl: assert on SSL_set_shutdown with BoringSSL
- MINOR: Use "500 Internal Server Error" for 500 error/status code message.
- MINOR: proto_http.c 502 error txt typo.
- DOC: add deprecation notice to "block"
- MINOR: compression: fix -vv output without zlib/slz
- BUG/MINOR: Reset errno variable before calling strtol(3)
- MINOR: ssl: don't show prefer-server-ciphers output
- OPTIM/MINOR: config: Optimize fullconn automatic computation loading configuration
- BUG/MINOR: stream: Fix how backend-specific analyzers are set on a stream
- MAJOR: ssl: bind configuration per certificat
- MINOR: ssl: add curve suite for ECDHE negotiation
- MINOR: checks: Add agent-addr config directive
- MINOR: cli: Add possiblity to change agent config via CLI/socket
- MINOR: doc: Add docs for agent-addr configuration variable
- MINOR: doc: Add docs for agent-addr and agent-send CLI commands
- BUILD: ssl: fix to build (again) with boringssl
- BUILD: ssl: fix build on OpenSSL 1.0.0
- BUILD: ssl: silence a warning reported for ERR_remove_state()
- BUILD: ssl: eliminate warning with OpenSSL 1.1.0 regarding RAND_pseudo_bytes()
- BUILD: ssl: kill a build warning introduced by BoringSSL compatibility
- BUG/MEDIUM: tcp: don't poll for write when connect() succeeds
- BUG/MINOR: unix: fix connect's polling in case no data are scheduled
- MINOR: server: extend the flags to 32 bits
- BUG/MINOR: lua: Map.end are not reliable because "end" is a reserved keyword
- MINOR: dns: give ability to dns_init_resolvers() to close a socket when requested
- BUG/MAJOR: dns: restart sockets after fork()
- MINOR: chunks: implement a simple dynamic allocator for trash buffers
- BUG/MEDIUM: http: prevent redirect from overwriting a buffer
- BUG/MEDIUM: filters: Do not truncate HTTP response when body length is undefined
- BUG/MEDIUM: http: Prevent replace-header from overwriting a buffer
- BUG/MINOR: http: Return an error when a replace-header rule failed on the response
- BUG/MINOR: sendmail: The return of vsnprintf is not cleanly tested
- BUG/MAJOR: ssl: fix a regression in ssl_sock_shutw()
- BUG/MAJOR: lua segmentation fault when the request is like 'GET ?arg=val HTTP/1.1'
- BUG/MEDIUM: config: reject anything but "if" or "unless" after a use-backend rule
- MINOR: http: don't close when redirect location doesn't start with "/"
- MEDIUM: boringssl: support native multi-cert selection without bundling
- BUG/MEDIUM: ssl: fix verify/ca-file per certificate
- BUG/MEDIUM: ssl: switchctx should not return SSL_TLSEXT_ERR_ALERT_WARNING
- MINOR: ssl: removes SSL_CTX_set_ssl_version call and cleanup CTX creation.
- BUILD: ssl: fix build with -DOPENSSL_NO_DH
- MEDIUM: ssl: add new sample-fetch which captures the cipherlist
- MEDIUM: ssl: remove ssl-options from crt-list
- BUG/MEDIUM: ssl: in bind line, ssl-options after 'crt' are ignored.
- BUG/MINOR: ssl: fix cipherlist captures with sustainable SSL calls
- MINOR: ssl: improved cipherlist captures
- BUG/MINOR: spoe: Fix soft stop handler using a specific id for spoe filters
- BUG/MINOR: spoe: Fix parsing of arguments in spoe-message section
- MAJOR: spoe: Add support of pipelined and asynchronous exchanges with agents
- MINOR: spoe: Add support for pipelining/async capabilities in the SPOA example
- MINOR: spoe: Remove SPOE details from the appctx structure
- MINOR: spoe: Add status code in error variable instead of hardcoded value
- MINOR: spoe: Send a log message when an error occurred during event processing
- MINOR: spoe: Check the scope of sample fetches used in SPOE messages
- MEDIUM: spoe: Be sure to wakeup the good entity waiting for a buffer
- MINOR: spoe: Use the min of all known max_frame_size to encode messages
- MAJOR: spoe: Add support of payload fragmentation in NOTIFY frames
- MINOR: spoe: Add support for fragmentation capability in the SPOA example
- MAJOR: spoe: refactor the filter to clean up the code
- MINOR: spoe: Handle NOTIFY frames cancellation using ABORT bit in ACK frames
- REORG: spoe: Move struct and enum definitions in dedicated header file
- REORG: spoe: Move low-level encoding/decoding functions in dedicated header file
- MINOR: spoe: Improve implementation of the payload fragmentation
- MINOR: spoe: Add support of negation for options in SPOE configuration file
- MINOR: spoe: Add "pipelining" and "async" options in spoe-agent section
- MINOR: spoe: Rely on alertif_too_many_arg during configuration parsing
- MINOR: spoe: Add "send-frag-payload" option in spoe-agent section
- MINOR: spoe: Add "max-frame-size" statement in spoe-agent section
- DOC: spoe: Update SPOE documentation to reflect recent changes
- MINOR: config: warn when some HTTP rules are used in a TCP proxy
- BUG/MEDIUM: ssl: Clear OpenSSL error stack after trying to parse OCSP file
- BUG/MEDIUM: cli: Prevent double free in CLI ACL lookup
- BUG/MINOR: Fix "get map <map> <value>" CLI command
- MINOR: Add nbsrv sample converter
- CLEANUP: Replace repeated code to count usable servers with be_usable_srv()
- MINOR: Add hostname sample fetch
- CLEANUP: Remove comment that's no longer valid
- MEDIUM: http_error_message: txn->status / http_get_status_idx.
- MINOR: http-request tarpit deny_status.
- CLEANUP: http: make http_server_error() not set the status anymore
- MEDIUM: stats: Add JSON output option to show (info|stat)
- MEDIUM: stats: Add show json schema
- BUG/MAJOR: connection: update CO_FL_CONNECTED before calling the data layer
- MINOR: server: Add dynamic session cookies.
- MINOR: cli: Let configure the dynamic cookies from the cli.
- BUG/MINOR: checks: attempt clean shutw for SSL check
- CONTRIB: tcploop: make it build on FreeBSD
- CONTRIB: tcploop: fix time format to silence build warnings
- CONTRIB: tcploop: report action 'K' (kill) in usage message
- CONTRIB: tcploop: fix connect's address length
- CONTRIB: tcploop: use the trash instead of NULL for recv()
- BUG/MEDIUM: listener: do not try to rebind another process' socket
- BUG/MEDIUM server: Fix crash when dynamic is defined, but not key is provided.
- CLEANUP: config: Typo in comment.
- BUG/MEDIUM: filters: Fix channels synchronization in flt_end_analyze
- TESTS: add a test configuration to stress handshake combinations
- BUG/MAJOR: stream-int: do not depend on connection flags to detect connection
- BUG/MEDIUM: connection: ensure to always report the end of handshakes
- MEDIUM: connection: don't test for CO_FL_WAKE_DATA
- CLEANUP: connection: completely remove CO_FL_WAKE_DATA
- BUG: payload: fix payload not retrieving arbitrary lengths
- BUILD: ssl: simplify SSL_CTX_set_ecdh_auto compatibility
- BUILD: ssl: fix OPENSSL_NO_SSL_TRACE for boringssl and libressl
- BUG/MAJOR: http: fix typo in http_apply_redirect_rule
- MINOR: doc: 2.4. Examples should be 2.5. Examples
- BUG/MEDIUM: stream: fix client-fin/server-fin handling
- MINOR: fd: add a new flag HAP_POLL_F_RDHUP to struct poller
- BUG/MINOR: raw_sock: always perfom the last recv if RDHUP is not available
- OPTIM: poll: enable support for POLLRDHUP
- MINOR: kqueue: exclusively rely on the kqueue returned status
- MEDIUM: kqueue: take care of EV_EOF to improve polling status accuracy
- MEDIUM: kqueue: only set FD_POLL_IN when there are pending data
- DOC/MINOR: Fix typos in proxy protocol doc
- DOC: Protocol doc: add checksum, TLV type ranges
- DOC: Protocol doc: add SSL TLVs, rename CHECKSUM
- DOC: Protocol doc: add noop TLV
- MEDIUM: global: add a 'hard-stop-after' option to cap the soft-stop time
- MINOR: dns: improve DNS response parsing to use as many available records as possible
- BUG/MINOR: cfgparse: loop in tracked servers lists not detected by check_config_validity().
- MINOR: server: irrelevant error message with 'default-server' config file keyword.
- MINOR: server: Make 'default-server' support 'backup' keyword.
- MINOR: server: Make 'default-server' support 'check-send-proxy' keyword.
- CLEANUP: server: code alignement.
- MINOR: server: Make 'default-server' support 'non-stick' keyword.
- MINOR: server: Make 'default-server' support 'send-proxy' and 'send-proxy-v2 keywords.
- MINOR: server: Make 'default-server' support 'check-ssl' keyword.
- MINOR: server: Make 'default-server' support 'force-sslv3' and 'force-tlsv1[0-2]' keywords.
- CLEANUP: server: code alignement.
- MINOR: server: Make 'default-server' support 'no-ssl*' and 'no-tlsv*' keywords.
- MINOR: server: Make 'default-server' support 'ssl' keyword.
- MINOR: server: Make 'default-server' support 'send-proxy-v2-ssl*' keywords.
- CLEANUP: server: code alignement.
- MINOR: server: Make 'default-server' support 'verify' keyword.
- MINOR: server: Make 'default-server' support 'verifyhost' setting.
- MINOR: server: Make 'default-server' support 'check' keyword.
- MINOR: server: Make 'default-server' support 'track' setting.
- MINOR: server: Make 'default-server' support 'ca-file', 'crl-file' and 'crt' settings.
- MINOR: server: Make 'default-server' support 'redir' keyword.
- MINOR: server: Make 'default-server' support 'observe' keyword.
- MINOR: server: Make 'default-server' support 'cookie' keyword.
- MINOR: server: Make 'default-server' support 'ciphers' keyword.
- MINOR: server: Make 'default-server' support 'tcp-ut' keyword.
- MINOR: server: Make 'default-server' support 'namespace' keyword.
- MINOR: server: Make 'default-server' support 'source' keyword.
- MINOR: server: Make 'default-server' support 'sni' keyword.
- MINOR: server: Make 'default-server' support 'addr' keyword.
- MINOR: server: Make 'default-server' support 'disabled' keyword.
- MINOR: server: Add 'no-agent-check' server keyword.
- DOC: server: Add docs for "server" and "default-server" new "no-*" and other settings.
- MINOR: doc: fix use-server example (imap vs mail)
- BUG/MEDIUM: tcp: don't require privileges to bind to device
- BUILD: make the release script use shortlog for the final changelog
- BUILD: scripts: fix typo in announce-release error message
- CLEANUP: time: curr_sec_ms doesn't need to be exported
- BUG/MEDIUM: server: Wrong server default CRT filenames initialization.
- BUG/MEDIUM: peers: fix buffer overflow control in intdecode.
- BUG/MEDIUM: buffers: Fix how input/output data are injected into buffers
- BUG/MINOR: http: Fix conditions to clean up a txn and to handle the next request
- CLEANUP: http: Remove channel_congested function
- CLEANUP: buffers: Remove buffer_bounce_realign function
- CLEANUP: buffers: Remove buffer_contig_area and buffer_work_area functions
- MINOR: http: remove useless check on HTTP_MSGF_XFER_LEN for the request
- MINOR: http: Add debug messages when HTTP body analyzers are called
- BUG/MEDIUM: http: Fix blocked HTTP/1.0 responses when compression is enabled
- BUG/MINOR: filters: Don't force the stream's wakeup when we wait in flt_end_analyze
- DOC: fix parenthesis and add missing "Example" tags
- DOC: update the contributing file
- DOC: log-format/tcplog/httplog update
- MINOR: config parsing: add warning when log-format/tcplog/httplog is overriden in "defaults" sections
In flt_end_analyze, we wait that the anlayze is finished for both the request
and the response. In this case, because of a task_wakeup, some streams can
consume too much CPU to do nothing. So now, this is the filter's responsibility
to know if this wakeup is needed.
This fix should be backported in 1.7.
When the compression filter is enabled, if a HTTP/1.0 response is received (no
content-length and no transfer-encoding), no data are forwarded to the client
because of a bug and the transaction is blocked indefinitly.
The bug comes from the fact we need to synchronize the end of the request and
the response because of the compression filter. This inhibits the infinite
forwarding of data. But for these responses, the compression is not
activated. So the response body is not analyzed. This leads to a deadlock.
The solution is to enable the analyze of the response body in all cases and
handle this one to enable the infinite forwarding. All other cases should
already by handled.
This fix should be backported to 1.7.
To finish a HTTP transaction and to start the new one, we check, among other
things, that there is enough space in the reponse buffer to eventually inject a
message during the parsing of the next request. Because these messages can reach
the maximum buffers size, it is mandatory to have an empty response
buffer. Remaining input data are trimmed during the txn cleanup (in
http_reset_txn), so we just need to check that the output data were flushed.
The current implementation depends on channel_congested, which does check the
reserved area is available. That's not of course good enough. There are other
tests on the reponse buffer is http_wait_for_request. But conditions to move on
are almost the same. So, we can imagine some scenarii where some output data
remaining in the reponse buffer during the request parsing prevent any messages
injection.
To fix this bug, we just wait that output data were flushed before cleaning up
the HTTP txn (ie. s->res.buf->o == 0). In addition, in http_reset_txn we realign
the response buffer (note the buffer is empty at this step).
Thanks to this changes, there is no more need to set CF_EXPECT_MORE on the
response channel in http_end_txn_clean_session. And more important, there is no
more need to check the response buffer state in http_wait_for_request. This
remove a workaround on response analysers to handle HTTP pipelining.
This patch can be backported in 1.7, 1.6 and 1.5.
The function buffer_contig_space is buggy and could lead to pernicious bugs
(never hitted until now, AFAIK). This function should return the number of bytes
that can be written into the buffer at once (without wrapping).
First, this function is used to inject input data (bi_putblk) and to inject
output data (bo_putblk and bo_inject). But there is no context. So it cannot
decide where contiguous space should placed. For input data, it should be after
bi_end(buf) (ie, buf->p + buf->i modulo wrapping calculation). For output data,
it should be after bo_end(buf) (ie, buf->p) and input data are assumed to not
exist (else there is no space at all).
Then, considering we need to inject input data, this function does not always
returns the right value. And when we need to inject output data, we must be sure
to have no input data at all (buf->i == 0), else the result can also be wrong
(but this is the caller responsibility, so everything should be fine here).
The buffer can be in 3 different states:
1) no wrapping
<---- o ----><----- i ----->
+------------+------------+-------------+------------+
| |oooooooooooo|iiiiiiiiiiiii|xxxxxxxxxxxx|
+------------+------------+-------------+------------+
^ <contig_space>
p ^ ^
l r
2) input wrapping
...---> <---- o ----><-------- i -------...
+-----+------------+------------+--------------------+
|iiiii|xxxxxxxxxxxx|oooooooooooo|iiiiiiiiiiiiiiiiiiii|
+-----+------------+------------+--------------------+
<contig_space> ^
^ ^ p
l r
3) output wrapping
...------ o ------><----- i -----> <----...
+------------------+-------------+------------+------+
|oooooooooooooooooo|iiiiiiiiiiiii|xxxxxxxxxxxx|oooooo|
+------------------+-------------+------------+------+
^ <contig_space>
p ^ ^
l r
buffer_contig_space returns (l - r). The cases 1 and 3 are correctly
handled. But for the second case, r is wrong. It points on the buffer's end
(buf->data + buf->size). It should be bo_end(buf) (ie, buf->p - buf->o).
To fix the bug, the function has been splitted. Now, bi_contig_space and
bo_contig_space should be used to know the contiguous space available to insert,
respectively, input data and output data. For bo_contig_space, input data are
assumed to not exist. And the right version is used, depending what we want to
do.
In addition, to clarify the buffer's API, buffer_realign does not return value
anymore. So it has the same API than buffer_slow_realign.
This patch can be backported in 1.7, 1.6 and 1.5.
A buffer overflow could happen if an integer is badly encoded in
the data part of a msg received from a peer. It should not happen
with authenticated peers (the handshake do not use this function).
This patch makes the code of the 'intdecode' function more robust.
It also adds some comments about the intencode function.
This bug affects versions >= 1.6.
This patch fixes a bug which came with 5e57643 commit where server
default CRT filenames were initialized to the same value as server
default CRL filenames.
Ankit Malp reported a bug that we've had since binding to devices was
implemented. Haproxy wrongly checks that the process stays privileged
after startup when a binding to a device is specified via the bind
keyword "interface". This is wrong, because after startup we're not
binding any socket anymore, and during startup if there's a permission
issue it will be immediately reported ("permission denied"). More
importantly there's no way around it as the process exits on startup
when facing such an option.
This fix should be backported to 1.7, 1.6 and 1.5.
This patch adds 'no-agent-check' setting supported both by 'default-server'
and 'server' directives to disable an agent check for a specific server which would
have 'agent-check' set as default value (inherited from 'default-server'
'agent-check' setting), or, on 'default-server' lines, to disable 'agent-check' setting
as default value for any further 'server' declarations.
For instance, provided this configuration:
default-server agent-check
server srv1
server srv2 no-agent-check
server srv3
default-server no-agent-check
server srv4
srv1 and srv3 would have an agent check enabled contrary to srv2 and srv4.
We do not allocate anymore anything when parsing 'default-server' 'agent-check'
setting.
Before this patch, only 'server' directives could support 'disabled' setting.
This patch makes also 'default-server' directives support this setting.
It is used to disable a list of servers declared after a 'defaut-server' directive.
'enabled' new keyword has been added, both supported as 'default-server' and
'server' setting, to enable again a list of servers (so, declared after a
'default-server enabled' directive) or to explicitly enable a specific server declared
after a 'default-server disabled' directive.
For instance provided this configuration:
default-server disabled
server srv1...
server srv2...
server srv3... enabled
server srv4... enabled
srv1 and srv2 are disabled and srv3 and srv4 enabled.
This is equivalent to this configuration:
default-server disabled
server srv1...
server srv2...
default-server enabled
server srv3...
server srv4...
even if it would have been preferable/shorter to declare:
server srv3...
server srv4...
default-server disabled
server srv1...
server srv2...
as 'enabled' is the default server state.
This patch makes 'default-server' support 'addr' setting.
The code which was responsible of parsing 'server' 'addr' setting
has moved from parse_server() to implement a new parser
callable both as 'default-server' and 'server' 'addr' setting parser.
Should not break anything.
This patch makes 'default-server' directives support 'sni' settings.
A field 'sni_expr' has been added to 'struct server' to temporary
stores SNI expressions as strings during both 'default-server' and 'server'
lines parsing. So, to duplicate SNI expressions from 'default-server' 'sni' setting
for new 'server' instances we only have to "strdup" these strings as this is
often done for most of the 'server' settings.
Then, sample expressions are computed calling sample_parse_expr() (only for 'server'
instances).
A new function has been added to produce the same error output as before in case
of any error during 'sni' settings parsing (display_parser_err()).
Should not break anything.
Before this patch, only 'server' directives could support 'source' setting.
This patch makes also 'default-server' directives support this setting.
To do so, we had to extract the code responsible of parsing 'source' setting
arguments from parse_server() function and make it callable both
as 'default-server' and 'server' 'source' setting parser. So, the code is mostly
the same as before except that before allocating anything for 'struct conn_src'
members, we must free the memory previously allocated.
Should not break anything.
Before this patch, 'cookie' setting was only supported by 'server' directives.
This patch makes 'default-server' directive also support 'cookie' setting.
Should not break anything.
Before this path, 'observe' setting was only supported by 'server' directives.
This patch makes 'default-server' directives also support 'observe' setting.
Should not break anything.
Before this patch only 'server' directives could support 'redir' setting.
This patch makes also 'default-server' directives support 'redir' setting.
Should not break anything.
Before this patch only 'server' directives could support 'track' setting.
This patch makes 'default-server' directives also support this setting.
Should not break anything.
Before this patch 'check' setting was only supported by 'server' directives.
This patch makes also 'default-server' directives support this setting.
A new 'no-check' keyword parser has been implemented to disable this setting both
in 'default-server' and 'server' directives.
Should not break anything.
This patch makes 'default-server' directive support 'verifyhost' setting.
Note: there was a little memory leak when several 'verifyhost' arguments were
supplied on the same 'server' line.
This patch makes 'default-server' directive support 'send-proxy-v2-ssl'
(resp. 'send-proxy-v2-ssl-cn') setting.
A new keyword 'no-send-proxy-v2-ssl' (resp. 'no-send-proxy-v2-ssl-cn') has been
added to disable 'send-proxy-v2-ssl' (resp. 'send-proxy-v2-ssl-cn') setting both
in 'server' and 'default-server' directives.
This patch makes 'default-server' directive support 'ssl' setting.
A new keyword 'no-ssl' has been added to disable this setting both
in 'server' and 'default-server' directives.
This patch makes 'default-server' directive support 'no-sslv3' (resp. 'no-ssl-reuse',
'no-tlsv10', 'no-tlsv11', 'no-tlsv12', and 'no-tls-tickets') setting.
New keywords 'sslv3' (resp. 'ssl-reuse', 'tlsv10', 'tlsv11', 'tlsv12', and
'tls-no-tickets') have been added to disable these settings both in 'server' and
'default-server' directives.
This patch makes 'default-server' directive support 'force-sslv3'
and 'force-tlsv1[0-2]' settings.
New keywords 'no-force-sslv3' (resp. 'no-tlsv1[0-2]') have been added
to disable 'force-sslv3' (resp. 'force-tlsv1[0-2]') setting both in 'server' and
'default-server' directives.
This patch makes 'default-server' directive support 'check-ssl' setting
to enable SSL for health checks.
A new keyword 'no-check-ssl' has been added to disable this setting both in
'server' and 'default-server' directives.
This patch makes 'default-server' directive support 'send-proxy'
(resp. 'send-proxy-v2') setting.
A new keyword 'no-send-proxy' (resp. 'no-send-proxy-v2') has been added
to disable 'send-proxy' (resp. 'send-proxy-v2') setting both in 'server' and
'default-server' directives.
This patch makes 'default-server' directive support 'non-stick' setting.
A new keyword 'stick' has been added so that to disable
'non-stick' setting both in 'server' and 'default-server' directives.
This patch makes 'default-server' directive support 'check-send-proxy' setting.
A new keyword 'no-check-send-proxy' has been added so that to disable
'check-send-proxy' setting both in 'server' and 'default-server' directives.
At this time, only 'server' supported 'backup' keyword.
This patch makes also 'default-server' directive support this keyword.
A new keyword 'no-backup' has been added so that to disable 'backup' setting
both in 'server' and 'default-server' directives.
For instance, provided the following sequence of directives:
default-server backup
server srv1
server srv2 no-backup
default-server no-backup
server srv3
server srv4 backup
srv1 and srv4 are declared as backup servers,
srv2 and srv3 are declared as non-backup servers.
There is no reason to emit such an error message:
"'default-server' expects <name> and <addr>[:<port>] as arguments."
if less than two arguments are provided on 'default-server' lines.
This is a 'server' specific error message.
There is a silly case where a loop is not detected in tracked servers lists:
when a server tracks itself.
Ex:
server srv1 127.0.0.1:8000 track srv1
Well, this never happens and this does not prevent haproxy from working.
But with this next following configuration:
server srv1 127.0.0.1:8000 track srv2
server srv2 127.0.0.1:8000 track srv2
server srv3 127.0.0.1:8000 track srv2
the code in charge of detecting such loops never returns (without any error message).
haproxy becomes stuck in an infinite loop because of this statement found
in check_config_validity():
for (loop = srv->track; loop && loop != newsrv; loop = loop->track);
Again, such a configuration is never accidentally used I guess.
This latter example seems silly, but as several 'default-server' directives may be used
in the same proxy section, and as 'default-server' settings are not resetted each a
new 'default-server' line is created, it will match the following configuration, in the future,
when 'track' setting will be supported by 'default-server':
default-server track srv3
server srv1 127.0.0.1:8000
server srv2 127.0.0.1:8000
.
.
.
default-server check
server srv3 127.0.0.1:8000
(cherry picked from commit 6528fc93d3c065fdac841f24e55cfe9674a67414)
A "weakness" exist in the first implementation of the parsing of the DNS
responses: HAProxy always choses the first IP available matching family
preference, or as a failover, the first IP.
It should be good enough, since most DNS servers do round robin on the
records they send back to clients.
That said, some servers does not do proper round robin, or we may be
unlucky too and deliver the same IP to all the servers sharing the same
hostname.
Let's take the simple configuration below:
backend bk
srv s1 www:80 check resolvers R
srv s2 www:80 check resolvers R
The DNS server configured with 2 IPs for 'www'.
If you're unlucky, then HAProxy may apply the same IP to both servers.
Current patch improves this situation by weighting the decision
algorithm to ensure we'll prefer use first an IP found in the response
which is not already affected to any server.
The new algorithm does not guarantee that the chosen IP is healthy,
neither a fair distribution of IPs amongst the servers in the farm,
etc...
It only guarantees that if the DNS server returns many records for a
hostname and that this hostname is being resolved by multiple servers in
the same backend, then we'll use as many records as possible.
If a server fails, HAProxy won't pick up an other record from the
response.
When SIGUSR1 is received, haproxy enters in soft-stop and quits when no
connection remains.
It can happen that the instance remains alive for a long time, depending
on timeouts and traffic. This option ensures that soft-stop won't run
for too long.
Example:
global
hard-stop-after 30s # Once in soft-stop, the instance will remain
# alive for at most 30 seconds.
kevent() always sets EV_EOF with EVFILT_READ to notify of a read shutdown
and EV_EOF with EVFILT_WRITE to notify of a write error. Let's check this
flag to properly update the FD's polled status (FD_POLL_HUP and FD_POLL_ERR
respectively).
It's worth noting that this one can be coupled with a regular read event
to notify about a pending read followed by a shutdown, but for now we only
use this to set the relevant flags (HUP and ERR).
The poller now exhibits the flag HAP_POLL_F_RDHUP to indicate this new
capability.
An improvement may consist in not setting FD_POLL_IN when the "data"
field is null since it normally only reflects the amount of pending
data.
After commit e852545 ("MEDIUM: polling: centralize polled events processing")
all pollers stopped to explicitly check the FD's polled status, except the
kqueue poller which is constructed a bit differently. It doesn't seem possible
to cause any issue such as missing an event however, but anyway it's better to
definitely get rid of this since the event filter already provides the event
direction.
On Linux since 2.6.17 poll() supports POLLRDHUP to notify of an upcoming
hangup after pending data. Making use of it allows us to avoid a useless
recv() after short responses on keep-alive connections. Note that we
automatically enable the feature once this flag has been met first in a
poll() status. Till now it was only enabled on epoll.
Curu Wong reported a case where haproxy used to send RST to a server
after receiving its FIN. The problem is caused by the fact that being
a server connection, its fd is marked with linger_risk=1, and that the
poller didn't report POLLRDHUP, making haproxy unaware of a pending
shutdown that came after the data, so it used to resort to nolinger
for closing.
However when pollers support RDHUP we're pretty certain whether or not
a shutdown comes after the data and we don't need to perform that extra
recv() call.
Similarly when we're dealing with an inbound connection we don't care
and don't want to perform this extra recv after a request for a very
unlikely case, as in any case we'll have to deal with the client-facing
TIME_WAIT socket.
So this patch ensures that only when it's known that there's no risk with
lingering data, as well as in cases where it's known that the poller would
have detected a pending RDHUP, we perform the fd_done_recv() otherwise we
continue, trying a subsequent recv() to try to detect a pending shutdown.
This effectively results in an extra recv() call for keep-alive sockets
connected to a server when POLLRDHUP isn't known to be supported, but
it's the only way to know whether they're still alive or closed.
This fix should be backported to 1.7, 1.6 and 1.5. It relies on the
previous patch bringing support for the HAP_POLL_F_RDHUP flag.
We'll need to differenciate between pollers which can report hangup at
the same time as read (POLL_RDHUP) from the other ones, because only
these ones may benefit from the fd_done_recv() optimization. Epoll has
had support for EPOLLRDHUP since Linux 2.6.17 and has always been used
this way in haproxy, so now we only set the flag once we've observed it
once in a response. It means that some initial requests may try to
perform a second recv() call, but after the first closed connection it
will be enough to know that the second call is not needed anymore.
Later we may extend these flags to designate event-triggered pollers.
A tcp half connection can cause 100% CPU on expiration.
First reproduced with this haproxy configuration :
global
tune.bufsize 10485760
defaults
timeout server-fin 90s
timeout client-fin 90s
backend node2
mode tcp
timeout server 900s
timeout connect 10s
server def 127.0.0.1:3333
frontend fe_api
mode tcp
timeout client 900s
bind :1990
use_backend node2
Ie timeout server-fin shorter than timeout server, the backend server
sends data, this package is left in the cache of haproxy, the backend
server continue sending fin package, haproxy recv fin package. this
time the session information is as follows:
time the session information is as follows:
0x2373470: proto=tcpv4 src=127.0.0.1:39513 fe=fe_api be=node2
srv=def ts=08 age=1s calls=3 rq[f=848000h,i=0,an=00h,rx=14m58s,wx=,ax=]
rp[f=8004c020h,i=0,an=00h,rx=,wx=14m58s,ax=] s0=[7,0h,fd=6,ex=]
s1=[7,18h,fd=7,ex=] exp=14m58s
rp has set the CF_SHUTR state, next, the client sends the fin package,
session information is as follows:
0x2373470: proto=tcpv4 src=127.0.0.1:39513 fe=fe_api be=node2
srv=def ts=08 age=38s calls=4 rq[f=84a020h,i=0,an=00h,rx=,wx=,ax=]
rp[f=8004c020h,i=0,an=00h,rx=1m11s,wx=14m21s,ax=] s0=[7,0h,fd=6,ex=]
s1=[9,10h,fd=7,ex=] exp=1m11s
After waiting 90s, session information is as follows:
0x2373470: proto=tcpv4 src=127.0.0.1:39513 fe=fe_api be=node2
srv=def ts=04 age=4m11s calls=718074391 rq[f=84a020h,i=0,an=00h,rx=,wx=,ax=]
rp[f=8004c020h,i=0,an=00h,rx=?,wx=10m49s,ax=] s0=[7,0h,fd=6,ex=]
s1=[9,10h,fd=7,ex=] exp=? run(nice=0)
cpu information:
6899 root 20 0 112224 21408 4260 R 100.0 0.7 3:04.96 haproxy
Buffering is set to ensure that there is data in the haproxy buffer, and haproxy
can receive the fin package, set the CF_SHUTR flag, If the CF_SHUTR flag has been
set, The following code does not clear the timeout message, causing cpu 100%:
stream.c:process_stream:
if (unlikely((res->flags & (CF_SHUTR|CF_READ_TIMEOUT)) == CF_READ_TIMEOUT)) {
if (si_b->flags & SI_FL_NOHALF)
si_b->flags |= SI_FL_NOLINGER;
si_shutr(si_b);
}
If you have closed the read, set the read timeout does not make sense.
With or without cf_shutr, read timeout is set:
if (tick_isset(s->be->timeout.serverfin)) {
res->rto = s->be->timeout.serverfin;
res->rex = tick_add(now_ms, res->rto);
}
After discussion on the mailing list, setting half-closed timeouts the
hard way here doesn't make sense. They should be set only at the moment
the shutdown() is performed. It will also solve a special case which was
already reported of some half-closed timeouts not working when the shutw()
is performed directly at the stream-interface layer (no analyser involved).
Since the stream interface layer cannot know the timeout values, we'll have
to store them directly in the stream interface so that they are used upon
shutw(). This patch does this, fixing the problem.
An easier reproducer to validate the fix is to keep the huge buffer and
shorten all timeouts, then call it under tcploop server and client, and
wait 3 seconds to see haproxy run at 100% CPU :
global
tune.bufsize 10485760
listen px
bind :1990
timeout client 90s
timeout server 90s
timeout connect 1s
timeout server-fin 3s
timeout client-fin 3s
server def 127.0.0.1:3333
$ tcploop 3333 L W N20 A P100 F P10000 &
$ tcploop 127.0.0.1:1990 C S10000000 F
Because of this typo, AN_RES_FLT_END was never called when a redirect rule is
applied on a keep-alive connection. In almost all cases, this bug has no
effect. But, it leads to a memory leak if a redirect is done on a http-response
rule when the HTTP compression is enabled.
This patch should be backported in 1.7.
SSL_CTX_set_ecdh_auto is declared (when present) with #define. A simple #ifdef
avoid to list all cases of ssllibs. It's a placebo in new ssllibs. It's ok with
openssl 1.0.1, 1.0.2, 1.1.0, libressl and boringssl.
Thanks to Piotr Kubaj for postponing and testing with libressl.
This fixes a regression introduced in d7bdcb874b, that removed the
ability to use req.payload(0,0) to read the whole buffer content. The
offending commit is present starting in version 1.6, so the patch
should be backported to versions 1.6 and 1.7.
This flag is always set when we end up here, for each and every data
layer (idle, stream-interface, checks), and continuing to test it
leaves a big risk of forgetting to set it as happened once already
before 1.5-dev13.
It could make sense to backport this into stable branches as part of
the connection flag fixes, after some cool down period.
Despite the previous commit working fine on all tests, it's still not
sufficient to completely address the problem. If the connection handler
is called with an event validating an L4 connection but some handshakes
remain (eg: accept-proxy), it will still wake the function up, which
will not report the activity, and will not detect a change once the
handshake it complete so it will not notify the ->wake() handler.
In fact the only reason why the ->wake() handler is still called here
is because after dropping the last handshake, we try to call ->recv()
and ->send() in turn and change the flags in order to detect a data
activity. But if for any reason the data layer is not interested in
reading nor writing, it will not get these events.
A cleaner way to address this is to call the ->wake() handler only
on definitive status changes (shut, error), on real data activity,
and on a complete connection setup, measured as CONNECTED with no
more handshake pending.
It could be argued that the handshake flags have to be made part of
the condition to set CO_FL_CONNECTED but that would currently break
a part of the health checks. Also a handshake could appear at any
moment even after a connection is established so we'd lose the
ability to detect a second end of handshake.
For now the situation around CO_FL_CONNECTED is not clean :
- session_accept() only sets CO_FL_CONNECTED if there's no pending
handshake ;
- conn_fd_handler() will set it once L4 and L6 are complete, which
will do what session_accept() above refrained from doing even if
an accept_proxy handshake is still pending ;
- ssl_sock_infocbk() and ssl_sock_handshake() consider that a
handshake performed with CO_FL_CONNECTED set is a renegociation ;
=> they should instead filter on CO_FL_WAIT_L6_CONN
- all ssl_fc_* sample fetch functions wait for CO_FL_CONNECTED before
accepting to fetch information
=> they should also get rid of any pending handshake
- smp_fetch_fc_rcvd_proxy() uses !CO_FL_CONNECTED instead of
CO_FL_ACCEPT_PROXY
- health checks (standard and tcp-checks) don't check for HANDSHAKE
and may report a successful check based on CO_FL_CONNECTED while
not yet done (eg: send buffer full on send_proxy).
This patch aims at solving some of these side effects in a backportable
way before this is reworked in depth :
- we need to call ->wake() to report connection success, measure
connection time, notify that the data layer is ready and update
the data layer after activity ; this has to be done either if
we switch from pending {L4,L6}_CONN to nothing with no handshakes
left, or if we notice some handshakes were pending and are now
done.
- we document that CO_FL_CONNECTED exactly means "L4 connection
setup confirmed at least once, L6 connection setup confirmed
at least once or not necessary, all this regardless of any
possibly remaining handshakes or future L6 negociations".
This patch also renames CO_FL_CONN_STATUS to the more explicit
CO_FL_NOTIFY_DATA, and works around the previous flags trick consiting
in setting an impossible combination of flags to notify the data layer,
by simply clearing the current flags.
This fix should be backported to 1.7, 1.6 and 1.5.
Recent fix 7bf3fa3 ("BUG/MAJOR: connection: update CO_FL_CONNECTED before
calling the data layer") marked an end to a fragile situation where the
absence of CO_FL_{CONNECTED,L4,L6}* flags is used to mark the completion
of a connection setup. The problem is that by setting the CO_FL_CONNECTED
flag earlier, we can indeed call the ->wake() function from conn_fd_handler
but the stream-interface's wake function needs to see CO_FL_CONNECTED unset
to detect that a connection has just been established, so if there's no
pending data in the buffer, the connection times out. The other ->wake()
functions (health checks and idle connections) don't do this though.
So instead of trying to detect a subtle change in connection flags,
let's simply rely on the stream-interface's state and validate that the
connection is properly established and that handshakes are completed
before reporting the WRITE_NULL indicating that a pending connection was
just completed.
This patch passed all tests of handshake and non-handshake combinations,
with synchronous and asynchronous connect() and should be safe for backport
to 1.7, 1.6 and 1.5 when the fix above is already present.
When a filter is used, there are 2 channel's analyzers to surround all the
others, flt_start_analyze and flt_end_analyze. This is the good place to acquire
and release resources used by filters, when needed. In addition, the last one is
used to synchronize the both channels, especially for HTTP streams. We must wait
that the analyze is finished for the both channels for an HTTP transaction
before restarting it for the next one.
But this part was buggy, leading to unexpected behaviours. First, depending on
which channel ends first, the request or the response can be switch in a
"forward forever" mode. Then, the HTTP transaction can be cleaned up too early,
while a processing is still in progress on a channel.
To fix the bug, the flag CF_FLT_ANALYZE has been added. It is set on channels in
flt_start_analyze and is kept if at least one filter is still analyzing the
channel. So, we can trigger the channel syncrhonization if this flag was removed
on the both channels. In addition, the flag TX_WAIT_CLEANUP has been added on
the transaction to know if the transaction must be cleaned up or not during
channels syncrhonization. This way, we are sure to reset everything once all the
processings are finished.
This patch should be backported in 1.7.
When the "process" setting of a bind line limits the processes a
listening socket is enabled on, a "disable frontend" operation followed
by an "enable frontend" triggers a bug because all declared listeners
are attempted to be bound again regardless of their assigned processes.
This can at minima create new sockets not receiving traffic, and at worst
prevent from re-enabling a frontend if it's bound to a privileged port.
This bug was introduced by commit 1c4b814 ("MEDIUM: listener: support
rebinding during resume()") merged in 1.6-dev1, trying to perform the
bind() before checking the process list instead of after.
Just move the process check before the bind() operation to fix this.
This fix must be backported to 1.7 and 1.6.
Thanks to Pavlos for reporting this one.
Strict interpretation of TLS can cause SSL sessions to be thrown away
when the socket is shutdown without sending a "close notify", resulting
in each check to go through the complete handshake, eating more CPU on
the servers.
[wt: strictly speaking there's no guarantee that the close notify will
be delivered, it's only best effort, but that may be enough to ensure
that once at least one is received, next checks will be cheaper. This
should be backported to 1.7 and possibly 1.6]
This adds 3 new commands to the cli :
enable dynamic-cookie backend <backend> that enables dynamic cookies for a
specified backend
disable dynamic-cookie backend <backend> that disables dynamic cookies for a
specified backend
set dynamic-cookie-key backend <backend> that lets one change the dynamic
cookie secret key, for a specified backend.
This adds a new "dynamic" keyword for the cookie option. If set, a cookie
will be generated for each server (assuming one isn't already provided on
the "server" line), from the IP of the server, the TCP port, and a secret
key provided. To provide the secret key, a new keyword as been added,
"dynamic-cookie-key", for backends.
Example :
backend bk_web
balance roundrobin
dynamic-cookie-key "bla"
cookie WEBSRV insert dynamic
server s1 127.0.0.1:80 check
server s2 192.168.56.1:80 check
This is a first step to be able to dynamically add and remove servers,
without modifying the configuration file, and still have all the load
balancers redirect the traffic to the right server.
Provide a way to generate session cookies, based on the IP address of the
server, the TCP port, and a secret key provided.
Matthias Fechner reported a regression in 1.7.3 brought by the backport
of commit 819efbf ("BUG/MEDIUM: tcp: don't poll for write when connect()
succeeds"), causing some connections to fail to establish once in a while.
While this commit itself was a fix for a bad sequencing of connection
events, it in fact unveiled a much deeper bug going back to the connection
rework era in v1.5-dev12 : 8f8c92f ("MAJOR: connection: add a new
CO_FL_CONNECTED flag").
It's worth noting that in a lab reproducing a similar environment as
Matthias' about only 1 every 19000 connections exhibit this behaviour,
making the issue not so easy to observe. A trick to make the problem
more observable consists in disabling non-blocking mode on the socket
before calling connect() and re-enabling it later, so that connect()
always succeeds. Then it becomes 100% reproducible.
The problem is that this CO_FL_CONNECTED flag is tested after deciding to
call the data layer (typically the stream interface but might be a health
check as well), and that the decision to call the data layer relies on a
change of one of the flags covered by the CO_FL_CONN_STATE set, which is
made of CO_FL_CONNECTED among others.
Before the fix above, this bug couldn't appear with TCP but it could
appear with Unix sockets. Indeed, connect() was always considered
blocking so the CO_FL_WAIT_L4_CONN connection flag was always set, and
polling for write events was always enabled. This used to guarantee that
the conn_fd_handler() could detect a change among the CO_FL_CONN_STATE
flags.
Now with the fix above, if a connect() immediately succeeds for non-ssl
connection with send-proxy enabled, and no data in the buffer (thus TCP
mode only), the CO_FL_WAIT_L4_CONN flag is not set, the lack of data in
the buffer doesn't enable polling flags for the data layer, the
CO_FL_CONNECTED flag is not set due to send-proxy still being pending,
and once send-proxy is done, its completion doesn't cause the data layer
to be woken up due to the fact that CO_FL_CONNECT is still not present
and that the CO_FL_SEND_PROXY flag is not watched in CO_FL_CONN_STATE.
Then no progress is made when data are received from the client (and
attempted to be forwarded), because a CF_WRITE_NULL (or CF_WRITE_PARTIAL)
flag is needed for the stream-interface state to turn from SI_ST_CON to
SI_ST_EST, allowing ->chk_snd() to be called when new data arrive. And
the only way to set this flag is to call the data layer of course.
After the connect timeout, the connection gets killed and if in the mean
time some data have accumulated in the buffer, the retry will succeed.
This patch fixes this situation by simply placing the update of
CO_FL_CONNECTED where it should have been, before the check for a flag
change needed to wake up the data layer and not after.
This fix must be backported to 1.7, 1.6 and 1.5. Versions not having
the patch above are still affected for unix sockets.
Special thanks to Matthias Fechner who provided a very detailed bug
report with a bisection designating the faulty patch, and to Olivier
Houchard for providing full access to a pretty similar environment where
the issue could first be reproduced.
This may be used to output the JSON schema which describes the output of
show info json and show stats json.
The JSON output is without any extra whitespace in order to reduce the
volume of output. For human consumption passing the output through a
pretty printer may be helpful.
e.g.:
$ echo "show schema json" | socat /var/run/haproxy.stat stdio | \
python -m json.tool
The implementation does not generate the schema. Some consideration could
be given to integrating the output of the schema with the output of
typed and json info and stats. In particular the types (u32, s64, etc...)
and tags.
A sample verification of show info json and show stats json using
the schema is as follows. It uses the jsonschema python module:
cat > jschema.py << __EOF__
import json
from jsonschema import validate
from jsonschema.validators import Draft3Validator
with open('schema.txt', 'r') as f:
schema = json.load(f)
Draft3Validator.check_schema(schema)
with open('instance.txt', 'r') as f:
instance = json.load(f)
validate(instance, schema, Draft3Validator)
__EOF__
$ echo "show schema json" | socat /var/run/haproxy.stat stdio > schema.txt
$ echo "show info json" | socat /var/run/haproxy.stat stdio > instance.txt
python ./jschema.py
$ echo "show stats json" | socat /var/run/haproxy.stat stdio > instance.txt
python ./jschema.py
Signed-off-by: Simon Horman <horms@verge.net.au>
Add a json parameter to show (info|stat) which will output information
in JSON format. A follow-up patch will add a JSON schema which describes
the format of the JSON output of these commands.
The JSON output is without any extra whitespace in order to reduce the
volume of output. For human consumption passing the output through a
pretty printer may be helpful.
e.g.:
$ echo "show info json" | socat /var/run/haproxy.stat stdio | \
python -m json.tool
STAT_STARTED has bee added in order to track if show output has begun or
not. This is used in order to allow the JSON output routines to only insert
a "," between elements when needed. I would value any feedback on how this
might be done better.
Signed-off-by: Simon Horman <horms@verge.net.au>
Given that all call places except one had to set txn->status prior to
calling http_server_error(), it's simpler to make this function rely
on txn->status than have it store it from an argument.
This commit removes second argument(msgnum) from http_error_message and
changes http_error_message to use s->txn->status/http_get_status_idx for
mapping status code from 200..504 to HTTP_ERR_200..HTTP_ERR_504(enum).
This is needed for http-request tarpit deny_status commit.
It adds "hostname" as a new sample fetch. It does exactly the same as
"%H" in a log format except that it can be used outside of log formats.
Signed-off-by: Nenad Merdanovic <nmerdan@haproxy.com>
2 places were using an open-coded implementation of this function to count
available servers. Note that the avg_queue_size() fetch didn't check that
the proxy was in STOPPED state so it would possibly return a wrong server
count here but that wouldn't impact the returned value.
Signed-off-by: Nenad Merdanovic <nmerdan@haproxy.com>
This is like the nbsrv() sample fetch function except that it works as
a converter so it can count the number of available servers of a backend
name retrieved using a sample fetch or an environment variable.
Signed-off-by: Nenad Merdanovic <nmerdan@haproxy.com>
The said form of the CLI command didn't return anything since commit
ad8be61c7.
This fix needs to be backported to 1.7.
Signed-off-by: Nenad Merdanovic <nmerdan@haproxy.com>
The memory is released by cli_release_mlook, which also properly sets the
pointer to NULL. This was introduced with a big code reorganization
involving moving to the new keyword registration form in commit ad8be61c7.
This fix needs to be backported to 1.7.
Signed-off-by: Nenad Merdanovic <nmerdan@haproxy.com>
Invalid OCSP file (for example empty one that can be used to enable
OCSP response to be set dynamically later) causes errors that are
placed on OpenSSL error stack. Those errors are not cleared so
anything that checks this stack later will fail.
Following configuration:
bind :443 ssl crt crt1.pem crt crt2.pem
With following files:
crt1.pem
crt1.pem.ocsp - empty one
crt2.pem.rsa
crt2.pem.ecdsa
Will fail to load.
This patch should be backported to 1.7.
Surprizingly, http-request, http-response, block, redirect, and capture
rules did not cause a warning to be emitted when used in a TCP proxy, so
let's fix this.
This patch may be backported to older versions as it helps spotting
configuration issues.
As its named said, this statement customize the maximum allowed size for frames
exchanged between HAProxy and SPOAs. It should be greater than or equal to 256
and less than or equal to (tune.bufsize - 4) (4 bytes are reserved to the frame
length).
This option can be used to enable or to disable (prefixing the option line with
the "no" keyword) the sending of fragmented payload to agents. By default, this
option is enabled.
These options can be used to enable or to disable (prefixing the option line
with the "no" keyword), respectively, pipelined and asynchronous exchanged
between HAproxy and agents. By default, pipelining and async options are
enabled.
Now, when a payload is fragmented, the first frame must define the frame type
and the followings must use the special type SPOE_FRM_T_UNSET. This way, it is
easy to know if a fragment is the first one or not. Of course, all frames must
still share the same stream-id and frame-id.
Update SPOA example accordingly.
If an agent want to abort the processing a fragmented NOTIFY frame before
receiving all fragments, it can send an ACK frame at any time with ABORT bit set
(and of course, the FIN bit too).
Beside this change, SPOE_FRM_ERR_FRAMEID_NOTFOUND error flag has been added. It
is set when a unknown ACK frame is received.
Now, agents can announce the support for the "fragmentation" capability during
the HELLO handshake. HAProxy will never announce it because fragmented frame
decoding is not implemented yet. But it can send such kind of frames. So, if an
agent supports this capability, payloads exceeding the frame size will be
split. A fragemented payload consists of several frames with the FIN bit clear
and terminated by a single frame with the FIN bit set. All these frames must
share the same STREAM-ID and FRAME-ID.
Note that an unfragemnted payload consists of a single frame with the FIN bit
set. And HELLO and DISCONNECT frames cannot be fragmented. This means that only
NOTIFY frames can transport fragmented payload for now.
The max_frame_size value is negociated between HAProxy and SPOE agents during
the HELLO handshake. It is a per-connection value. Different SPOE agents can
choose to use different max_frame_size values. So, now, we keep the minimum of
all known max_frame_size. This minimum is updated when a new connection to a
SPOE agent is opened and when a connection is closed. We use this value as a
limit to encode messages in NOTIFY frames.
This happens when buffer allocation failed. In the SPOE context, buffers are
allocated by streams and SPOE applets at different time. First, by streams, when
messages need to be encoded before sending them in a NOTIFY frame. Then, by SPOE
applets, when a ACK frame is received.
The first case works as expected, we wake up the stream. But for the second one,
we must wake up the waiting SPOE applet.
Now, when option "set-on-error" is enabled, we set a status code representing
the error occurred instead of "true". For values under 256, it represents an
error coming from the engine. Below 256, it reports a SPOP error. In this case,
to retrieve the right SPOP status code, you must remove 256 to this value. Here
are possible values:
* 1: a timeout occurred during the event processing.
* 2: an error was triggered during the ressources allocation.
* 255: an unknown error occurred during the event processing.
* 256+N: a SPOP error occurred during the event processing.
Now, as for peers, we use an opaque pointer to store information related to the
SPOE filter in appctx structure. These information are now stored in a dedicated
structure (spoe_appctx) and allocated, using a pool, when the applet is created.
This removes the dependency between applets and the SPOE filter and avoids to
eventually inflate the appctx structure.
Now, HAProxy and agents can announce the support for "pipelining" and/or "async"
capabilities during the HELLO handshake. For now, HAProxy always announces the
support of both. In addition, in its HELLO frames. HAproxy adds the "engine-id"
key. It is a uniq string that identify a SPOE engine.
The "pipelining" capability is the ability for a peer to decouple NOTIFY and ACK
frames. This is a symmectical capability. To be used, it must be supported by
HAproxy and agents. Unlike HTTP pipelining, the ACK frames can be send in any
order, but always on the same TCP connection used for the corresponding NOTIFY
frame.
The "async" capability is similar to the pipelining, but here any TCP connection
established between HAProxy and the agent can be used to send ACK frames. if an
agent accepts connections from multiple HAProxy, it can use the "engine-id"
value to group TCP connections.
The array of pointers passed to sample_parse_expr was not really an array but a
pointer to pointer. So it can easily lead to a segfault during the configuration
parsing.
During a soft stop, we need to wakeup all SPOE applets to stop them. So we loop
on all proxies, and for each proxy, on all filters. But we must be sure to only
handle SPOE filters here. To do so, we use a specific id.
Use SSL_set_ex_data/SSL_get_ex_data standard API call to store capture.
We need to avoid internal structures/undocumented calls usage to try to
control the beast and limit painful compatibilities.
Bug introduced with "removes SSL_CTX_set_ssl_version call and cleanup CTX
creation": ssl_sock_new_ctx is called before all the bind line is parsed.
The fix consists of separating the use of default_ctx as the initialization
context of the SSL connection via bind_conf->initial_ctx. Initial_ctx contains
all the necessary parameters before performing the selection of the CTX:
default_ctx is processed as others ctx without unnecessary parameters.
This new sample-fetches captures the cipher list offer by the client
SSL connection during the client-hello phase. This is useful for
fingerprint the SSL connection.
BoringSSL doesn't support SSL_CTX_set_ssl_version. To remove this call, the
CTX creation is cleanup to clarify what is happening. SSL_CTX_new is used to
match the original behavior, in order: force-<method> according the method
version then the default method with no-<method> options.
OPENSSL_NO_SSL3 error message is now in force-sslv3 parsing (as force-tls*).
For CTX creation in bind environement, all CTX set related to the initial ctx
are aggregate to ssl_sock_new_ctx function for clarity.
Tests with crt-list have shown that server_method, options and mode are
linked to the initial CTX (default_ctx): all ssl-options are link to each
bind line and must be removed from crt-list.
Extract from RFC 6066:
"If the server understood the ClientHello extension but does not recognize
the server name, the server SHOULD take one of two actions: either abort the
handshake by sending a fatal-level unrecognized_name(112) alert or continue the
handshake. It is NOT RECOMMENDED to send a warning-level unrecognized_name(112)
alert, because the client's behavior in response to warning-level alerts is
unpredictable. If there is a mismatch between the server name used by the
client application and the server name of the credential chosen by the server,
this mismatch will become apparent when the client application performs the
server endpoint identification, at which point the client application will have
to decide whether to proceed with the communication."
Thanks Roberto Guimaraes for the bug repport, spotted with openssl-1.1.0.
This fix must be backported.
SSL verify and client_CA inherits from the initial ctx (default_ctx).
When a certificate is found, the SSL connection environment must be replaced by
the certificate configuration (via SSL_set_verify and SSL_set_client_CA_list).
This patch used boringssl's callback to analyse CLientHello before any
handshake to extract key signature capabilities.
Certificat with better signature (ECDSA before RSA) is choosed
transparenty, if client can support it. RSA and ECDSA certificates can
be declare in a row (without order). This makes it possible to set
different ssl and filter parameter with crt-list.
In 1.4-dev5 when we started to implement keep-alive, commit a9679ac
("[MINOR] http: make the conditional redirect support keep-alive")
added a specific check was added to support keep-alive on redirect
rules but only when the location would start with a "/" indicating
the client would come back to the same server.
But nowadays most applications put http:// or https:// in front of
each and every location, and continuing to perform a close there is
counter-efficient, especially when multiple objects are fetched at
once from a same origin which redirects them to the correct origin
(eg: after an http to https forced upgrade).
It's about time to get rid of this old trick as it causes more harm
than good at an era where persistent connections are omnipresent.
Special thanks to Ciprian Dorin Craciun for providing convincing
arguments with a pretty valid use case and proposing this draft
patch which addresses the issue he was facing.
This change although not exactly a bug fix should be backported
to 1.7 to adapt better to existing infrastructure.
Adrian Fitzpatrick reported that since commit f51658d ("MEDIUM: config:
relax use_backend check to make the condition optional"), typos like "of"
instead of "if" on use_backend rules are not properly detected. The reason
is that the parser only checks for "if" or "unless" otherwise it considers
there's no keyword, making the rule inconditional.
This patch fixes it. It may reveal some rare config bugs for some people,
but will not affect valid configurations.
This fix must be backported to 1.7, 1.6 and 1.5.
Error in the HTTP parser. The function http_get_path() can
return NULL and this case is not catched in the code. So, we
try to dereference NULL pointer, and a segfault occurs.
These two lines are useful to prevent the bug.
acl prevent_bug path_beg /
http-request deny if !prevent_bug
This bug fix should be backported in 1.6 and 1.7
Commit 405ff31 ("BUG/MINOR: ssl: assert on SSL_set_shutdown with BoringSSL")
introduced a regression causing some random crashes apparently due to
memory corruption. The issue is the use of SSL_CTX_set_quiet_shutdown()
instead of SSL_set_quiet_shutdown(), making it use a different structure
and causing the flag to be put who-knows-where.
Many thanks to Jarno Huuskonen who reported this bug early and who
bisected the issue to spot this patch. No backport is needed, this
is 1.8-specific.
Historically, http-response rules couldn't produce errors generating HTTP
responses during their evaluation. This possibility was "implicitly" added with
http-response redirect rules (51d861a4). But, at the time, replace-header rules
were kept untouched. When such a rule failed, the rules processing was just
stopped (like for an accept rule).
Conversely, when a replace-header rule fails on the request, it generates a HTTP
response (400 Bad Request).
With this patch, errors on replace-header rule are now handled in the same way
for HTTP requests and HTTP responses.
This patch should be backported in 1.7 and 1.6.
This is the same fix as which concerning the redirect rules (0d94576c).
The buffer used to expand the <replace-fmt> argument must be protected to
prevent it being overwritten during build_logline() execution (the function used
to expand the format string).
This patch should be backported in 1.7, 1.6 and 1.5. It relies on commit b686afd
("MINOR: chunks: implement a simple dynamic allocator for trash buffers") for
the trash allocator, which has to be backported as well.
Some users have experienced some troubles using the compression filter when the
HTTP response body length is undefined. They complained about receiving
truncated responses.
In fact, the bug can be triggered if there is at least one filter attached to
the stream but none registered to analyze the HTTP response body. In this case,
when the body length is undefined, data should be forwarded without any
parsing. But, because of a wrong check, we were starting to parse them. Because
it was not expected, the end of response was not correctly detected and the
response could be truncted. So now, we rely on HAS_DATA_FILTER macro instead of
HAS_FILTER one to choose to parse HTTP response body or not.
Furthermore, in http_response_forward_body, the test to not forward the server
closure to the client has been updated to reflect conditions listed in the
associated comment.
And finally, in http_msg_forward_body, when the body length is undefined, we
continue the parsing it until the server closes the connection without any on
filters. So filters can safely stop to filter data during their parsing.
This fix should be backported in 1.7
See 4b788f7d34
If we use the action "http-request redirect" with a Lua sample-fetch or
converter, and the Lua function calls one of the Lua log function, the
header name is corrupted, it contains an extract of the last loggued data.
This is due to an overwrite of the trash buffer, because his scope is not
respected in the "add-header" function. The scope of the trash buffer must
be limited to the function using it. The build_logline() function can
execute a lot of other function which can use the trash buffer.
This patch fix the usage of the trash buffer. It limits the scope of this
global buffer to the local function, we build first the header value using
build_logline, and after we store the header name.
Thanks Jesse Schulman for the bug repport.
This patch must be backported in 1.7, 1.6 and 1.5 version, and it relies
on commit b686afd ("MINOR: chunks: implement a simple dynamic allocator for
trash buffers") for the trash allocator, which has to be backported as well.
The trash buffers are becoming increasingly complex to deal with due to
the code's modularity allowing some functions to be chained and causing
the same chunk buffers to be used multiple times along the chain, possibly
corrupting each other. In fact the trash were designed from scratch for
explicitly not surviving a function call but string manipulation makes
this impossible most of the time while not fullfilling the need for
reliable temporary chunks.
Here we introduce the ability to allocate a temporary trash chunk which
is reserved, so that it will not conflict with the trash chunks other
functions use, and will even support reentrant calls (eg: build_logline).
For this, we create a new pool which is exactly the size of a usual chunk
buffer plus the size of the chunk struct so that these chunks when allocated
are exactly the same size as the ones returned by get_trash_buffer(). These
chunks may fail so the caller must check them, and the caller is also
responsible for freeing them.
The code focuses on minimal changes and ease of reliable backporting
because it will be needed in stable versions in order to support next
patch.
UDP sockets used to send DNS queries are created before fork happens and
this is a big problem because all the processes (in case of a
configuration starting multiple processes) share the same socket. Some
processes may consume responses dedicated to an other one, some servers
may be disabled, some IPs changed, etc...
As a workaround, this patch close the existing socket and create a new
one after the fork() has happened.
[wt: backport this to 1.7]
The function dns_init_resolvers() is used to initialize socket used to
send DNS queries.
This patch gives the function the ability to close a socket before
re-opening it.
[wt: this needs to be backported to 1.7 for next fix]
This patch change the names prefixing it by a "_". So "end" becomes "_end".
The backward compatibility with names without the prefix "_" is assured.
In other way, another the keyword "end" can be used like this: Map['end'].
Thanks Robin H. Johnson for the bug repport
This should be backported in version 1.6 and 1.7
There's a test after a successful synchronous connect() consisting
in waking the data layer up asap if there's no more handshake.
Unfortunately this test is run before setting the CO_FL_SEND_PROXY
flag and before the transport layer adds its own flags, so it can
indicate a willingness to send data while it's not the case and it
will have to be handled later.
This has no visible effect except a useless call to a function in
case of health checks making use of the proxy protocol for example.
Additionally a corner case where EALREADY was returned and considered
equivalent to EISCONN was fixed so that it's considered equivalent to
EINPROGRESS given that the connection is not complete yet. But this
code should never return on the first call anyway so it's mostly a
cleanup.
This fix should be backported to 1.7 and 1.6 at least to avoid
headaches during some debugging.
While testing a tcp_fastopen related change, it appeared that in the rare
case where connect() can immediately succeed, we still subscribe to write
notifications on the socket, causing the conn_fd_handler() to immediately
be called and a second call to connect() to be attempted to double-check
the connection.
In fact this issue had already been met with unix sockets (which often
respond immediately) and partially addressed but incorrect so another
patch will follow. But for TCP nothing was done.
The fix consists in removing the WAIT_L4_CONN flag if connect() succeeds
and to subscribe for writes only if some handshakes or L4_CONN are still
needed. In addition in order not to fail raw TCP health checks, we have
to continue to enable polling for data when nothing is scheduled for
leaving and the connection is already established, otherwise the caller
will never be notified.
This fix should be backported to 1.7 and 1.6.
A recent patch to support BoringSSL caused this warning to appear on
OpenSSL 1.1.0 :
src/ssl_sock.c:3062:4: warning: statement with no effect [-Wunused-value]
It's caused by SSL_CTX_set_ecdh_auto() which is now only a macro testing
that the last argument is zero, and the result is not used here. Let's
just kill it for both versions.
Tested with 0.9.8, 1.0.0, 1.0.1, 1.0.2, 1.1.0. This fix may be backported
to 1.7 if the boringssl fix is as well.
Limitations:
. disable force-ssl/tls (need more work)
should be set earlier with SSL_CTX_new (SSL_CTX_set_ssl_version is removed)
. disable generate-certificates (need more work)
introduce SSL_NO_GENERATE_CERTIFICATES to disable generate-certificates.
Cleanup some #ifdef and type related to boringssl env.
This change adds possibility to change agent-addr and agent-send directives
by CLI/socket. Now you can replace server's and their configuration without
reloading/restarting whole haproxy, so it's a step in no-reload/no-restart
direction.
Depends on #e9602af - agent-addr is implemented there.
Can be backported to 1.7.
This directive add possibility to set different address for agent-checks.
With this you can manage server status and weight from central place.
Can be backported to 1.7.
crt-list is extend to support ssl configuration. You can now have
such line in crt-list <file>:
mycert.pem [npn h2,http/1.1]
Support include "npn", "alpn", "verify", "ca_file", "crl_file",
"ecdhe", "ciphers" configuration and ssl options.
"crt-base" is also supported to fetch certificates.
When the stream's backend was defined, the request's analyzers flag was always
set to 0 if the stream had no listener. This bug was introduced with the filter
API but never triggered (I think so).
Because of the commit 5820a366, it is now possible to encountered it. For
example, this happens when the trace filter is enabled on a SPOE backend. The
fix is pretty trivial.
This fix must be backported to 1.7.
The previous version used an O(number of proxies)^2 algo to get the sum of
the number of maxconns of frontends which reference a backend at least once.
This new version adds the frontend's maxconn number to the backend's
struct proxy member 'tot_fe_maxconn' when the backend name is resolved
for switching rules or default_backend statment. At the end, the final
backend's fullconn is computed looping only one time for all on proxies O(n).
The load of a configuration using a large amount of backends (10 thousands)
without configured fullconn was reduced from several minutes to few seconds.
The output of whether prefer-server-ciphers is supported by OpenSSL
actually always show yes in 1.8, because SSL_OP_CIPHER_SERVER_PREFERENCE
is redefined before the actual check in src/ssl_sock.c, since it was
moved from here from src/haproxy.c.
Since this is not really relevant anymore as we don't support OpenSSL
< 0.9.7 anyway, this change just removes this output.
When haproxy is compiled without zlib or slz, the output of
haproxy -vv shows (null).
Make haproxy -vv output great again by providing the proper
information (which is what we did before).
This is for 1.8 only.
With BoringSSL:
SSL_set_shutdown: Assertion `(SSL_get_shutdown(ssl) & mode) == SSL_get_shutdown(ssl)' failed.
"SSL_set_shutdown causes ssl to behave as if the shutdown bitmask (see SSL_get_shutdown)
were mode. This may be used to skip sending or receiving close_notify in SSL_shutdown by
causing the implementation to believe the events already happened.
It is an error to use SSL_set_shutdown to unset a bit that has already been set.
Doing so will trigger an assert in debug builds and otherwise be ignored.
Use SSL_CTX_set_quiet_shutdown instead."
Change logic to not notify on SSL_shutdown when connection is not clean.
"X509_get_pubkey() attempts to decode the public key for certificate x.
If successful it returns the public key as an EVP_PKEY pointer with its
reference count incremented: this means the returned key must be freed
up after use."
This prevents DNS from resolving IPv6-only servers in 1.7. Note, this
patch depends on the previous series :
1. BUG/MINOR: tools: fix off-by-one in port size check
2. BUG/MEDIUM: server: consider AF_UNSPEC as a valid address family
3. MEDIUM: server: split the address and the port into two different fields
4. MINOR: tools: make str2sa_range() return the port in a separate argument
5. MINOR: server: take the destination port from the port field, not the addr
6. MEDIUM: server: disable protocol validations when the server doesn't resolve
This fix (hence the whole series) must be backported to 1.7.
When a server doesn't resolve we don't know the address family so we
can't perform the basic protocol validations. However we know that we'll
ultimately resolve to AF_INET4 or AF_INET6 so the controls are OK. It is
important to proceed like this otherwise it will not be possible to start
with unresolved addresses.
Next patch will cause the port to disappear from the address field when servers
do not resolve so we need to take it from the separate field provided by
str2sa_range().
Keeping the address and the port in the same field causes a lot of problems,
specifically on the DNS part where we're forced to cheat on the family to be
able to keep the port. This causes some issues such as some families not being
resolvable anymore.
This patch first moves the service port to a new field "svc_port" so that the
port field is never used anymore in the "addr" field (struct sockaddr_storage).
All call places were adapted (there aren't that many).
The DNS code is written so as to support AF_UNSPEC to decide on the
server family based on responses, but unfortunately snr_resolution_cb()
considers it as invalid causing a DNS storm to happen when a server
arrives with this family.
This situation is not supposed to happen as long as unresolved addresses
are forced to AF_INET, but this will change with the upcoming fixes and
it's possible that it's not granted already when changing an address on
the CLI.
This fix must be backported to 1.7 and 1.6.
port_to_str() checks that the port size is at least 5 characters instead
of at least 6. While in theory it could permit a buffer overflow, it's
harmless because all callers have at least 6 characters here.
This fix needs to be backported to 1.7, 1.6 and 1.5.
http-reuse should normally not be used in conjunction with the proxy
protocol or with "usesrc clientip". While there's nothing fundamentally
wrong with this, whenever these options are used, the server expects the
IP address to be the source address for all requests, which doesn't make
sense with http-reuse.
fc_rcvd_proxy : boolean
Returns true if the client initiated the connection with a PROXY protocol
header.
A flag is added on the struct connection if a PROXY header is successfully
parsed.
