Now we can detect the listener associated with a QUIC listener and report
a bit more info (e.g. listening port and frontend name), and provide a bit
more info about connections as well, and filter on both front connections
and listeners using the "l" and "f" flags.
This provides more consistency between the master and the worker. When
"prompt timed" is passed on the master, the timed mode is toggled. When
enabled, for a master it will show the master process' uptime, and for
a worker it will show this worker's uptime. Example:
master> prompt timed
[0:00:00:50] master> show proc
#<PID> <type> <reloads> <uptime> <version>
11940 master 1 [failed: 0] 0d00h02m10s 2.8-dev11-474c14-21
# workers
11955 worker 0 0d00h00m59s 2.8-dev11-474c14-21
# old workers
11942 worker 1 0d00h02m10s 2.8-dev11-474c14-21
# programs
[0:00:00:58] master> @!11955
[0:00:01:03] 11955> @!11942
[0:00:02:17] 11942> @
[0:00:01:10] master>
Entering "prompt timed" toggles reporting of the process' uptime in
the prompt, which will report days, hours, minutes and seconds since
it was started. As discussed with Tim in issue #2145, this can be
convenient to roughly estimate the time between two outputs, as well
as detecting that a process failed to be reloaded for example.
There's something very irritating on the CLI, when just pressing ENTER,
it complains "Unknown command: ''..." and dumps all the help. This
action is often done to add a bit of clearance after a dump to visually
find delimitors later, but this stupid error makes it unusable. This
patch addresses this by just returning on empty command instead of trying
to look up a matching keyword. It will result in an empty line to mark
the end of the empty command and a prompt again.
It's probably not worth backporting this given that nobody seems to have
complained about it yet.
sc_need_room() now takes the required free space to receive more data as
parameter. All calls to this function are updated accordingly. For now, this
value is set but not used. When we are waiting for a buffer, 0 is used. So
we expect to be unblocked ASAP. However this must be reviewed because
SC_FL_NEED_BUF is probably enough in this case and this flag is already set
if the input buffer allocation fails.
Instead of using the channel API to to write output message from the CLI
applet, we use the applet API. This way, the applet does not need to take
care to request more room it it fails to put its message into the channel's
buffer.
This puts an end to the occasional confusion between the "now" date
that is internal, monotonic and not synchronized with the system's
date, and "date" which is the system's date and not necessarily
monotonic. Variable "now" was removed and replaced with a 64-bit
integer "now_ns" which is a counter of nanoseconds. It wraps every
585 years, so if all goes well (i.e. if humanity does not need
haproxy anymore in 500 years), it will just never wrap. This implies
that now_ns is never nul and that the zero value can reliably be used
as "not set yet" for a timestamp if needed. This will also simplify
date checks where it becomes possible again to do "date1<date2".
All occurrences of "tv_to_ns(&now)" were simply replaced by "now_ns".
Due to the intricacies between now, global_now and now_offset, all 3
had to be turned to nanoseconds at once. It's not a problem since all
of them were solely used in 3 functions in clock.c, but they make the
patch look bigger than it really is.
The clock_update_local_date() and clock_update_global_date() functions
are now much simpler as there's no need anymore to perform conversions
nor to round the timeval up or down.
The wrapping continues to happen by presetting the internal offset in
the short future so that the 32-bit now_ms continues to wrap 20 seconds
after boot.
The start_time used to calculate uptime can still be turned to
nanoseconds now. One interrogation concerns global_now_ms which is used
only for the freq counters. It's unclear whether there's more value in
using two variables that need to be synchronized sequentially like today
or to just use global_now_ns divided by 1 million. Both approaches will
work equally well on modern systems, the difference might come from
smaller ones. Better not change anyhting for now.
One benefit of the new approach is that we now have an internal date
with a resolution of the nanosecond and the precision of the microsecond,
which can be useful to extend some measurements given that timestamps
also have this resolution.
Instead we're using ns_to_sec(tv_to_ns(&now)) which allows the tv_sec
part to disappear. At this point, "now" is only used as a timeval in
clock.c where it is updated.
Let's get rid of timeval in storage of internal timestamps so that they
are no longer mistaken for wall clock time. These were exclusively used
subtracted from each other or to/from "now" after being converted to ns,
so this patch removes the tv_to_ns() conversion to use them natively. Two
occurrences of tv_isge() were turned to a regular wrapping subtract.
Instead of operating on {sec, usec} now we convert both operands to
ns then subtract them and convert to ms. This is a first step towards
dropping timeval from these timestamps.
Interestingly, tv_ms_elapsed() and tv_ms_remain() are no longer used at
all and could be removed.
In 2.7-dev2, "stats bind-process" was removed by commit 94f763b5e
("MEDIUM: config: remove deprecated "bind-process" directives from
frontends") and an error message indicates that it's no more supported.
However it says "stats" is not supported instead of "stats bind-process",
making it a bit confusing.
This should be backported to 2.7.
When compiled in debug mode, HAProxy prints a debug message at the end of
the cli I/O handle. It is pretty annoying and useless because, we can active
applet traces. Thus, just remove it.
SC_FL_EOS flag is added to report the end-of-stream at the SC level. It will
be used to distinguish end of stream reported by the endoint, via the
SE_FL_EOS flag, and the abort triggered by the stream, via the
SC_FL_ABRT_DONE flag.
In this patch, the flag is defined and is systematically tested everywhere
SC_FL_ABRT_DONE is tested. It should be safe because it is never set.
In the same way the previous commit, we stop to use SE_FL_ERROR flag from
analyzers and their sub-functions. We now fully rely on SC_FL_ERROR to do so.
From the stream, when SE_FL_ERROR flag is tested, we now also test the
SC_FL_ERROR flag. Idea is to stop to rely on the SE descriptor to detect
errors.
The flag SC_FL_ERROR is added to ack errors on the endpoint. When
SE_FL_ERROR flag is detected on the SE descriptor, the corresponding is set
on the SC. Idea is to avoid, as far as possible, to manipulated the SE
descriptor in upper layers and know when an error in the endpoint is handled
by the SC.
For now, this flag is only set and cleared but never tested.
SE_FL_ERR_PENDING is used to report an error on the write side. But it is
not a terminal error. Some incoming data may still be available. In the cli
analyzers, it is important to not close the stream when this flag is
set. Otherwise the response to a command can be truncated. It is probably
hard to observe. But it remains a bug.
While this patch could be backported to 2.7, there is no real reason to do
so, except if someone reports a bug about truncated responses.
Here again, it is just a flag renaming. In SC flags, there is no longer
shutdown for reads but aborts. For now this flag is set when a read0 is
detected. It is of couse not accurate. This will be changed later.
After the flag renaming, it is now the turn for the channel function to be
renamed and moved in the SC scope. channel_shutw_now() is replaced by
sc_schedule_shutdown(). The request channel is replaced by the front SC and
the response is replace by the back SC.
Because shutowns for reads are now considered as aborts, the shudowns for
writes can now be considered as shutdowns. Here it is just a flag
renaming. SC_FL_SHUTW_NOW is renamed SC_FL_SHUT_WANTED.
After the flag renaming, it is now the turn for the channel function to be
renamed and moved in the SC scope. channel_shutr_now() is replaced by
sc_schedule_abort(). The request channel is replaced by the front SC and the
response is replace by the back SC.
When the cli applet is executed while a shut is pending, the remaining
output data must always be consumed. Otherwise, this can prevent the stream
to exit, leading to a spinning loop on the applet.
This patch should fix the issue #2107. It is 2.8-specific. No backport
needed.
An applet must never set SE_FL_EOS flag without SE_FL_EOI or SE_FL_ERROR
flags. Here, SE_FL_EOI flag was missing for "quit" or "_getsocks"
commands. Indeed, these commands are terminal.
This bug triggers a BUG_ON() recently added.
This patch is related to the issue #2107. It is 2.8-specific. No backport
needed.
The purpose of this patch is only a one-to-one replacement, as far as
possible.
CF_SHUTR(_NOW) and CF_SHUTW(_NOW) flags are now carried by the
stream-connecter. CF_ prefix is replaced by SC_FL_ one. Of course, it is not
so simple because at many places, we were testing if a channel was shut for
reads and writes in same time. To do the same, shut for reads must be tested
on one side on the SC and shut for writes on the other side on the opposite
SC. A special care was taken with process_stream(). flags of SCs must be
saved to be able to detect changes, just like for the channels.
It is the same kind of change than for the cache applet. Idea is to use the SE
desc instead of the channel or the SC to report end-of-input, end-of-stream and
errors.
Truncated commands are now reported on error. Other changes are the same than
for the cache applet. We now set SE_FL_EOS flag instead of calling cf_shutr()
and calls to cf_shutw are removed.
Depending on what we're debugging, some FDs can represent pollution in
the "show fd" output. Here we add a set of filters allowing to pick (or
exclude) any combination of listener, frontend conn, backend conn, pipes,
etc. "show fd l" will only list listening connections for example.
When FD are dumps, the connection error code is now displayed. This may help
to diagnose why a connection error occurred.
This patch may be backported to help debugging.
Anonymization mode has two CLI handlers "set anon <on|off>" and "set
anon global-key". The last one only requires admin level. However, as
cli_find_kw() is implemented, only the first handler will be retrieved
as they both start with the same prefix "set anon".
This has the effect to execute the wrong handler for "set anon
global-key" with an error message about an invalid keyword. To fix this,
handlers definition have been separated for both "set anon on" and "set
anon off" commands. This allows to have minimal changes while keeping
the same "set anon" prefix for each commands.
Also take this opportunity to fix a reference to a non-existing "set
global-key" CLI handler in the documentation.
This must be backported up to 2.7.
The half-closed timeout is now directly retrieved from the proxy
settings. There is no longer usage for the .hcto field in the stconn
structure. So let's remove it.
It was done by hand by callers when a shutdown for read or write was
performed. It is now always handled by the functions performing the
shutdown. This way the callers don't take care of it. This will avoid some
bugs.
Read and write timeouts (.rto and .wto) are now replaced by an unique
timeout, call .ioto. Since the recent refactoring on channel's timeouts,
both use the same value, the client timeout on client side and the server
timeout on the server side. Thus, this part may be simplified. Now it
represents the I/O timeout.
These timers are related to the I/O. Thus it is logical to move them into
the SE descriptor. The patch is a bit huge but it is just a
replacement. However it is error-prone.
From the stconn or the stream, helper functions are used to get, set or
reset these timers. This simplify the timers manipulations.
Read and write timeouts concerns the I/O. Thus, it is logical to move it into
the stconn. At the end, the stream is responsible to detect the timeouts. So
it is logcial to have these values in the stconn and not in the SE
descriptor. But it may change depending on the recfactoring.
So, now:
* scf->rto is used instead of req->rto
* scf->wto is used instead of res->wto
* scb->rto is used instead of res->rto
* scb->wto is used instead of req->wto
This patch removes CF_READ_ERROR and CF_WRITE_ERROR flags. We now rely on
SE_FL_ERR_PENDING and SE_FL_ERROR flags. SE_FL_ERR_PENDING is used for write
errors and SE_FL_ERROR for read or unrecoverable errors.
When a connection error is reported, SE_FL_ERROR and SE_FL_EOS are now set and a
read event and a write event are reported to be sure the stream will properly
process the error. At the stream-connector level, it is similar. When an error
is reported during a send, a write event is triggered. On the read side, nothing
more is performed because an error at this stage is enough to wake the stream
up.
A major change is brought with this patch. We stop to check flags of the
ooposite channel to report abort or timeout. It also means when an read or
write error is reported on a side, we no longer update the other side. Thus
a read error on the server side does no long lead to a write error on the
client side. This should ease errors report.
This flag was introduced in 1.3 to fix a design issue. It was untouch since
then but there is no reason to still have this trick. Note it could be good
to review what happens in HTTP with the server is waiting for the end of the
request. It could be good to be sure a client timeout is always reported.
Instead of reading and storing a single group and a single mask for a
"thread" directive on a bind line, we now store the complete range in
a thread set that's stored in the bind_conf. The bind_parse_thread()
function now just calls parse_thread_set() to complete the current set,
which starts empty, and thread_resolve_group_mask() was updated to
support retrieving thread group numbers or absolute thread numbers
directly from the pre-filled thread_set, and continue to feed bind_tgroup
and bind_thread. The CLI parsers which were pre-initialized to set the
bind_tgroup to 1 cannot do it anymore as it would prevent one from
restricting the thread set. Instead check_config_validity() now detects
the CLI frontend and passes the info down to thread_resolve_group_mask()
that will automatically use only the group 1's threads for these
listeners. The same is done for the peers listeners for now.
At this step it's already possible to start with all previous valid
configs as well as extended ones supporting comma-delimited thread
sets. In addition the parser already accepts large ranges spanning
multiple groups, but since the underlying listeners infrastructure
is not read, for now we're maintaining a specific check against this
at the higher level of the config validity check.
The patch is a bit large because thread resolution is performed in
multiple steps, so we need to adjust all of them at once to preserve
functional and technical consistency.
These two flags are entirely for internal use and are even per proxy
in practice since they're used for peers and CLI to indicate (for the
first one) that the listener(s) are not subject to connection limits,
and for the second that the listener(s) should not be stopped on
soft-stop. No need to keep them in the listeners, let's move them to
the bind_conf under names BC_O_UNLIMITED and BC_O_NOSTOP.
