The connect() method had 2 arguments, "data", that tells if there's pending
data to be sent, and "delack" that tells if we have to use a delayed ack
inconditionally, or if the backend is configured with tcp-smart-connect.
Turn that into one argument, "flags".
That way it'll be easier to provide more informations to connect() without
adding extra arguments.
The set-dst and set dst-var are available at both 'tcp-request
connection' and 'http-request' but not at the layer in the middle.
This patch fixes this miss and enables both set-dst and set-dst-var at
'tcp-request content' layer.
In an attempt to try to provide automatic maxconn settings, we need to
decorrelate a listner's backlog and maxconn so that these values can be
independent. This introduces a listener_backlog() function which retrieves
the backlog value from the listener's backlog, the frontend's, the
listener's maxconn, the frontend's or falls back to 1024. This
corresponds to what was done in cfgparse.c to force a value there except
the last fallback which was not set since the frontend's maxconn is always
known.
Now that nbproc and nbthread are exclusive, we can still provide more
detailed explanations about what we've found in the config when a bind
line appears on multiple threads and processes at the same time, then
ignore the setting.
This patch reduces the listener's thread mask to a single mask instead
of an array of masks per process. Now we have only one thread mask and
one process mask per bind-conf. This removes ~504 bytes of RAM per
bind-conf and will simplify handling of thread masks.
If a "bind" line only refers to process numbers not found by its parent
frontend or not covered by the global nbproc directive, or to a thread
not covered by the global nbthread directive, a warning is emitted saying
what will be used instead.
If the master was reloaded and there was a established connection to a
server, the FD resulting from the accept was leaking.
There was no CLOEXEC flag set on the FD of the socketpair created during
a connect call. This is specific to the socketpair in the master process
but it should be applied to every protocol in case we use them in the
master at some point.
No backport needed.
Most register_build_opts() calls use static strings. These ones were
replaced with a trivial REGISTER_BUILD_OPTS() statement adding the string
and its call to the STG_REGISTER section. A dedicated section could be
made for this if needed, but there are very few such calls for this to
be worth it. The calls made with computed strings however, like those
which retrieve OpenSSL's version or zlib's version, were moved to a
dedicated function to guarantee they are called late in the process.
For example, the SSL call probably requires that SSL_library_init()
has been called first.
This switches explicit calls to various trivial registration methods for
keywords, muxes or protocols from constructors to INITCALL1 at stage
STG_REGISTER. All these calls have in common to consume a single pointer
and return void. Doing this removes 26 constructors. The following calls
were addressed :
- acl_register_keywords
- bind_register_keywords
- cfg_register_keywords
- cli_register_kw
- flt_register_keywords
- http_req_keywords_register
- http_res_keywords_register
- protocol_register
- register_mux_proto
- sample_register_convs
- sample_register_fetches
- srv_register_keywords
- tcp_req_conn_keywords_register
- tcp_req_cont_keywords_register
- tcp_req_sess_keywords_register
- tcp_res_cont_keywords_register
- flt_register_keywords
In the various connect_server() functions, don't reset the connection flags,
as some may have been set before. The flags are initialized in conn_init(),
anyway.
These ones are mostly called from cfgparse.c for the parsing and do
not depend on the HTTP representation. The functions's prototypes
were moved to proto/http_rules.h, making this file work exactly like
tcp_rules. Ideally we should stop calling these functions directly
from cfgparse and register keywords, but there are a few cases where
that wouldn't work (stats http-request) so it's probably not worth
trying to go this far.
This patch improves the previous fix by implementing the socket draining
code directly in conn_sock_drain() so that it always applies regardless
of the protocol's family. Thus it gets rid of tcp_drain().
Chunks are only a subset of a buffer (a non-wrapping version with no head
offset). Despite this we still carry a lot of duplicated code between
buffers and chunks. Replacing chunks with buffers would significantly
reduce the maintenance efforts. This first patch renames the chunk's
fields to match the name and types used by struct buffers, with the goal
of isolating the code changes from the declaration changes.
Most of the changes were made with spatch using this coccinelle script :
@rule_d1@
typedef chunk;
struct chunk chunk;
@@
- chunk.str
+ chunk.area
@rule_d2@
typedef chunk;
struct chunk chunk;
@@
- chunk.len
+ chunk.data
@rule_i1@
typedef chunk;
struct chunk *chunk;
@@
- chunk->str
+ chunk->area
@rule_i2@
typedef chunk;
struct chunk *chunk;
@@
- chunk->len
+ chunk->data
Some minor updates to 3 http functions had to be performed to take size_t
ints instead of ints in order to match the unsigned length here.
fd_insert() is currently called just after setting the owner and iocb,
but proceeding like this prevents the operation from being atomic and
requires a lock to protect the maxfd computation in another thread from
meeting an incompletely initialized FD and computing a wrong maxfd.
Fortunately for now all fdtab[].owner are set before calling fd_insert(),
and the first lock in fd_insert() enforces a memory barrier so the code
is safe.
This patch moves the initialization of the owner and iocb to fd_insert()
so that the function will be able to properly arrange its operations and
remain safe even when modified to become lockless. There's no other change
beyond the internal API.
The listeners and connectors may complain that process-wide or
system-wide FD limits have been reached and will in this case report
maxfd as the limit. This is wrong in fact since there's no reason for
the whole FD space to be contiguous when the total # of FD is reached.
A better approach would consist in reporting the accurate number of
opened FDs, but this is pointless as what matters here is to give a
hint about what might be wrong. So let's simply report the configured
maxsock, which will generally explain why the process' limits were
reached, which is the most common reason. This removes another
dependency on maxfd.
Rename the global variable "proxy" to "proxies_list".
There's been multiple proxies in haproxy for quite some time, and "proxy"
is a potential source of bugs, a number of functions have a "proxy" argument,
and some code used "proxy" when it really meant "px" or "curproxy". It worked
by pure luck, because it usually happened while parsing the config, and thus
"proxy" pointed to the currently parsed proxy, but we should probably not
rely on this.
[wt: some of these are definitely fixes that are worth backporting]
All the references to connections in the data path from streams and
stream_interfaces were changed to use conn_streams. Most functions named
"something_conn" were renamed to "something_cs" for this. Sometimes the
connection still is what matters (eg during a connection establishment)
and were not always renamed. The change is significant and minimal at the
same time, and was quite thoroughly tested now. As of this patch, all
accesses to the connection from upper layers go through the pass-through
mux.
Now, each proxy contains a lock that must be used when necessary to protect
it. Moreover, all proxy's counters are now updated using atomic operations.
First, we use atomic operations to update jobs/totalconn/actconn variables,
listener's nbconn variable and listener's counters. Then we add a lock on
listeners to protect access to their information. And finally, listener queues
(global and per proxy) are also protected by a lock. Here, because access to
these queues are unusal, we use the same lock for all queues instead of a global
one for the global queue and a lock per proxy for others.
When compiled with Openssl >= 1.1.1, before attempting to do the handshake,
try to read any early data. If any early data is present, then we'll create
the session, read the data, and handle the request before we're doing the
handshake.
For this, we add a new connection flag, CO_FL_EARLY_SSL_HS, which is not
part of the CO_FL_HANDSHAKE set, allowing to proceed with a session even
before an SSL handshake is completed.
As early data do have security implication, we let the origin server know
the request comes from early data by adding the "Early-Data" header, as
specified in this draft from the HTTP working group :
https://datatracker.ietf.org/doc/html/draft-ietf-httpbis-replay
These flags are not exactly for the data layer, they instead indicate
what is expected from the transport layer. Since we're going to split
the connection between the transport and the data layers to insert a
mux layer, it's important to have a clear idea of what each layer does.
All function conn_data_* used to manipulate these flags were renamed to
conn_xprt_*.
A regression has been introduced in commit
00005ce5a1: the port being changed is the
one from 'cli_conn->addr.from' instead of 'cli_conn->addr.to'.
This patch fixes the regression.
Backport status: should be backported to HAProxy 1.7 and above.
cfgparse has no business directly calling each individual protocol's 'add'
function to create a listener. Now that they're all registered, better
perform a protocol lookup on the family and have a standard ->add method
for all of them.
It's a shame that cfgparse() has to make special cases of each protocol
just to cast the port to the target address family. Let's pass the port
in argument to the function. The unix listener simply ignores it.
Till now connections used to rely exclusively on file descriptors. It
was planned in the past that alternative solutions would be implemented,
leading to member "union t" presenting sock.fd only for now.
With QUIC, the connection will need to continue to exist but will not
rely on a file descriptor but a connection ID.
So this patch introduces a "connection handle" which is either a file
descriptor or a connection ID, to replace the existing "union t". We've
now removed the intermediate "struct sock" which was never used. There
is no functional change at all, though the struct connection was inflated
by 32 bits on 64-bit platforms due to alignment.
Try to reuse any socket from the old process, provided by the "-x" flag,
before binding a new one, assuming it is compatible.
"Compatible" here means same address and port, same namspace if any,
same interface if any, and that the following flags are the same :
LI_O_FOREIGN, LI_O_V6ONLY and LI_O_V4V6.
Also change tcp_bind_listener() to always enable/disable socket options,
instead of just doing so if it is in the configuration file, as the option
may have been removed, ie TCP_FASTOPEN may have been set in the old process,
and removed from the new configuration, so we have to disable it.
Ankit Malp reported a bug that we've had since binding to devices was
implemented. Haproxy wrongly checks that the process stays privileged
after startup when a binding to a device is specified via the bind
keyword "interface". This is wrong, because after startup we're not
binding any socket anymore, and during startup if there's a permission
issue it will be immediately reported ("permission denied"). More
importantly there's no way around it as the process exits on startup
when facing such an option.
This fix should be backported to 1.7, 1.6 and 1.5.
While testing a tcp_fastopen related change, it appeared that in the rare
case where connect() can immediately succeed, we still subscribe to write
notifications on the socket, causing the conn_fd_handler() to immediately
be called and a second call to connect() to be attempted to double-check
the connection.
In fact this issue had already been met with unix sockets (which often
respond immediately) and partially addressed but incorrect so another
patch will follow. But for TCP nothing was done.
The fix consists in removing the WAIT_L4_CONN flag if connect() succeeds
and to subscribe for writes only if some handshakes or L4_CONN are still
needed. In addition in order not to fail raw TCP health checks, we have
to continue to enable polling for data when nothing is scheduled for
leaving and the connection is already established, otherwise the caller
will never be notified.
This fix should be backported to 1.7 and 1.6.
There's no more reason to keep tcp rules processing inside proto_tcp.c
given that there is nothing in common there except these 3 letters : tcp.
The tcp rules are in fact connection, session and content processing rules.
Let's move them to "tcp-rules" and let them live their life there.
This commit introduces "tcp-request session" rules. These are very
much like "tcp-request connection" rules except that they're processed
after the handshake, so it is possible to consider SSL information and
addresses rewritten by the proxy protocol header in actions. This is
particularly useful to track proxied sources as this was not possible
before, given that tcp-request content rules are processed after each
HTTP request. Similarly it is possible to assign the proxied source
address or the client's cert to a variable.
This is in order to make integration of tcp-request-session cleaner :
- tcp_exec_req_rules() was renamed tcp_exec_l4_rules()
- LI_O_TCP_RULES was renamed LI_O_TCP_L4_RULES
(LI_O_*'s horrible indent was also fixed and a provision was left
for L5 rules).
When the tcp/http actions above were introduced in 1.7-dev4, we used to
proceed like this :
- set-src/set-dst would force the port to zero
- set-src-port/set-dst-port would not do anything if the address family is
neither AF_INET nor AF_INET6.
It was a stupid idea of mine to request this behaviour because it ensures
that these functions cannot be used in a wide number of situations. Because
of the first rule, it is necessary to save the source port one way or
another if only the address has to be changed (so you have to use an
variable). Due to the second rule, there's no way to set the source port
on a unix socket without first overwriting the address. And sometimes it's
really not convenient, especially when there's no way to guarantee that all
fields will properly be set.
In order to fix all this, this small change does the following :
- set-src/set-dst always preserve the original port even if the address
family changes. If the previous address family didn't have a port (eg:
AF_UNIX), then the port is set to zero ;
- set-src-port/set-dst-port always preserve the original address. If the
address doesn't have a port, then the family is forced to IPv4 and the
address to "0.0.0.0".
Thanks to this it now becomes possible to perform one action, the other or
both in any order.
Enable IP_BIND_ADDRESS_NO_PORT on backend connections when the source
address is specified without port or port ranges. This is supported
since Linux 4.2/libc 2.23.
If the kernel supports it but the libc doesn't, we can define it at
build time:
make [...] DEFINE=-DIP_BIND_ADDRESS_NO_PORT=24
For more informations about this feature, see Linux commit 90c337da
With Linux officially introducing SO_REUSEPORT support in 3.9 and
its mainstream adoption we have seen more people running into strange
SO_REUSEPORT related issues (a process management issue turning into
hard to diagnose problems because the kernel load-balances between the
new and an obsolete haproxy instance).
Also some people simply want the guarantee that the bind fails when
the old process is still bound.
This change makes SO_REUSEPORT configurable, introducing the command
line argument "-dR" and the noreuseport configuration directive.
A backport to 1.6 should be considered.
SOL_IPV6 is not defined on OSX, breaking the compile. Also libcrypt is
not available for installation neither in Macports nor as a Brew recipe,
so we're disabling implicit dependancy.
Signed-off-by: Dinko Korunic <dinko.korunic@gmail.com>
Adding on to Thierry's work (http://git.haproxy.org/?p=haproxy.git;h=6310bef5)
I have added a few more fetchers for counters based on the tcp_info struct
maintained by the kernel :
fc_unacked, fc_sacked, fc_retrans, fc_fackets, fc_lost,
fc_reordering
Two fields were not added because they're version-dependant :
fc_rcv_rtt, fc_total_retrans
The fields name depend on the operating system. FreeBSD and NetBSD prefix
all the field names with "__" so we have to rely on a few #ifdef for
portability.
On OpenBSD, netinet/ip.h fails unless in_systm.h is included. This
include was added by the silent-drop feature introduced with commit
2d392c2 ("MEDIUM: tcp: add new tcp action "silent-drop"") in 1.6-dev6,
but we don't need it, IP_TTL is defined in netinet/in.h, so let's drop
this useless include.
This fix needs to be backported to 1.6.
It is sometimes needed in application server environments to easily tell
if a source is local to the machine or a remote one, without necessarily
knowing all the local addresses (dhcp, vrrp, etc). Similarly in transparent
proxy configurations it is sometimes desired to tell the difference between
local and remote destination addresses.
This patch adds two new sample fetch functions for this :
dst_is_local : boolean
Returns true if the destination address of the incoming connection is local
to the system, or false if the address doesn't exist on the system, meaning
that it was intercepted in transparent mode. It can be useful to apply
certain rules by default to forwarded traffic and other rules to the traffic
targetting the real address of the machine. For example the stats page could
be delivered only on this address, or SSH access could be locally redirected.
Please note that the check involves a few system calls, so it's better to do
it only once per connection.
src_is_local : boolean
Returns true if the source address of the incoming connection is local to the
system, or false if the address doesn't exist on the system, meaning that it
comes from a remote machine. Note that UNIX addresses are considered local.
It can be useful to apply certain access restrictions based on where the
client comes from (eg: require auth or https for remote machines). Please
note that the check involves a few system calls, so it's better to do it only
once per connection.
This patch adds 4 new sample fetches which returns the RTT of the
established connexion and the RTT variance. The established connection
can be between the client and HAProxy, and between HAProxy and the
server. This is very useful for statistics. A great use case is the
estimation of the TCP connection time of the client. Note that the
RTT of the server side is not so interesting because we already have
the connect() time.
This configures the client-facing connection to receive a NetScaler
Client IP insertion protocol header before any byte is read from the
socket. This is equivalent to having the "accept-netscaler-cip" keyword
on the "bind" line, except that using the TCP rule allows the PROXY
protocol to be accepted only for certain IP address ranges using an ACL.
This is convenient when multiple layers of load balancers are passed
through by traffic coming from public hosts.
