In case of HTTP keepalive processing, we want to release the counters tracked
by the backend. Till now only the second set of counters was released, while
it could have been assigned by the frontend, or the backend could also have
assigned the first set. Now we reuse to unused bits of the session flags to
mark which stick counters were assigned by the backend and to release them as
appropriate.
The assumption that there was a 1:1 relation between tracked counters and
the frontend/backend role was wrong. It is perfectly possible to track the
track-fe-counters from the backend and the track-be-counters from the
frontend. Thus, in order to reduce confusion, let's remove this useless
{fe,be} reference and simply use {1,2} instead. The keywords have also been
renamed in order to limit confusion. The ACL rule action now becomes
"track-sc{1,2}". The ACLs are now "sc{1,2}_*" instead of "trk{fe,be}_*".
That means that we can reasonably document "sc1" and "sc2" (sticky counters
1 and 2) as sort of patterns that are available during the whole session's
life and use them just like any other pattern.
Having a single tracking pointer for both frontend and backend counters
does not work. Instead let's have one for each. The keyword has changed
to "track-be-counters" and "track-fe-counters", and the ACL "trk_*"
changed to "trkfe_*" and "trkbe_*".
It is now possible to dump some select table entries based on criteria
which apply to the stored data. This is enabled by appending the following
options to the end of the "show table" statement :
data.<data_type> {eq|ne|lt|gt|le|ge} <value>
For intance :
show table http_proxy data.conn_rate gt 5
show table http_proxy data.gpc0 ne 0
The compare applies to the integer value as it would be displayed, and
operates on signed long long integers.
It's a bit cumbersome to have to know all possible storable types
from the stats interface. Instead, let's have generic types for
all data, which will facilitate their manipulation.
It is now possible to dump a table's contents with keys, expire,
use count, and various data using the command above on the stats
socket.
"show table" only shows main table stats, while "show table <name>"
dumps table contents, only if the socket level is admin.
This patch adds support for the following session counters :
- http_req_cnt : HTTP request count
- http_req_rate: HTTP request rate
- http_err_cnt : HTTP request error count
- http_err_rate: HTTP request error rate
The equivalent ACLs have been added to check the tracked counters
for the current session or the counters of the current source.
This counter may be used to track anything. Two sets of ACLs are available
to manage it, one gets its value, and the other one increments its value
and returns it. In the second case, the entry is created if it did not
exist.
Thus it is possible for example to mark a source as being an abuser and
to keep it marked as long as it does not wait for the entry to expire :
# The rules below use gpc0 to track abusers, and reject them if
# a source has been marked as such. The track-counters statement
# automatically refreshes the entry which will not expire until a
# 1-minute silence is respected from the source. The second rule
# evaluates the second part if the first one is true, so GPC0 will
# be increased once the conn_rate is above 100/5s.
stick-table type ip size 200k expire 1m store conn_rate(5s),gpc0
tcp-request track-counters src
tcp-request reject if { trk_get_gpc0 gt 0 }
tcp-request reject if { trk_conn_rate gt 100 } { trk_inc_gpc0 gt 0}
Alternatively, it is possible to let the entry expire even in presence of
traffic by swapping the check for gpc0 and the track-counters statement :
stick-table type ip size 200k expire 1m store conn_rate(5s),gpc0
tcp-request reject if { src_get_gpc0 gt 0 }
tcp-request track-counters src
tcp-request reject if { trk_conn_rate gt 100 } { trk_inc_gpc0 gt 0}
It is also possible not to track counters at all, but entry lookups will
then be performed more often :
stick-table type ip size 200k expire 1m store conn_rate(5s),gpc0
tcp-request reject if { src_get_gpc0 gt 0 }
tcp-request reject if { src_conn_rate gt 100 } { src_inc_gpc0 gt 0}
The '0' at the end of the counter name is there because if we find that more
counters may be useful, other ones will be added.
These counters maintain incoming and outgoing byte rates in a stick-table,
over a period which is defined in the configuration (2 ms to 24 days).
They can be used to detect service abuse and enforce a certain bandwidth
limits per source address for instance, and block if the rate is passed
over. Since 32-bit counters are used to compute the rates, it is important
not to use too long periods so that we don't have to deal with rates above
4 GB per period.
Example :
# block if more than 5 Megs retrieved in 30 seconds from a source.
stick-table type ip size 200k expire 1m store bytes_out_rate(30s)
tcp-request track-counters src
tcp-request reject if { trk_bytes_out_rate gt 5000000 }
# cause a 15 seconds pause to requests from sources in excess of 2 megs/30s
tcp-request inspect-delay 15s
tcp-request content accept if { trk_bytes_out_rate gt 2000000 } WAIT_END
These counters maintain incoming connection rates and session rates
in a stick-table, over a period which is defined in the configuration
(2 ms to 24 days). They can be used to detect service abuse and
enforce a certain accept rate per source address for instance, and
block if the rate is passed over.
Example :
# block if more than 50 requests per 5 seconds from a source.
stick-table type ip size 200k expire 1m store conn_rate(5s),sess_rate(5s)
tcp-request track-counters src
tcp-request reject if { trk_conn_rate gt 50 }
# cause a 3 seconds pause to requests from sources in excess of 20 requests/5s
tcp-request inspect-delay 3s
tcp-request content accept if { trk_sess_rate gt 20 } WAIT_END
Some data types will require arguments (eg: period for a rate counter).
This patch adds support for such arguments between parenthesis in the
"store" directive of the stick-table statement. Right now only integers
are supported.
The new "bytes_in_cnt" and "bytes_out_cnt" session counters have been
added. They're automatically updated when session counters are updated.
They can be matched with the "src_kbytes_in" and "src_kbytes_out" ACLs
which apply to the volume per source address. This can be used to deny
access to service abusers.
The new "conn_cur" session counter has been added. It is automatically
updated upon "track XXX" directives, and the entry is touched at the
moment we increment the value so that we don't consider further counter
updates as real updates, otherwise we would end up updating upon completion,
which may not be desired. Probably that some other event counters (eg: HTTP
requests) will have to be updated upon each event though.
This counter can be matched against current session's source address using
the "src_conn_cur" ACL.
The "_cnt" suffix is already used by ACLs to count various data,
so it makes sense to use the same one in "conn_cnt" instead of
"conn_cum" to count cumulated connections.
This is not a problem because no version was emitted with those
keywords.
Thus we'll try to stick to the following rules :
xxxx_cnt : cumulated event count for criterion xxxx
xxxx_cur : current number of concurrent entries for criterion xxxx
xxxx_rate: event rate for criterion xxxx
This patch adds the ability to set a pointer in the session to an
entry in a stick table which holds various counters related to a
specific pattern.
Right now the syntax matches the target syntax and only the "src"
pattern can be specified, to track counters related to the session's
IPv4 source address. There is a special function to extract it and
convert it to a key. But the goal is to be able to later support as
many patterns as for the stick rules, and get rid of the specific
function.
The "track-counters" directive may only be set in a "tcp-request"
statement right now. Only the first one applies. Probably that later
we'll support multi-criteria tracking for a single session and that
we'll have to name tracking pointers.
No counter is updated right now, only the refcount is. Some subsequent
patches will have to bring that feature.
Sometimes it's necessary to be able to perform some "layer 6" analysis
in the backend. TCP request rules were not available till now, although
documented in the diagram. Enable them in backend now.
Some freq counters will have to work on periods different from 1 second.
The original freq counters rely on the period to be exactly one second.
The new ones (freq_ctr_period) let the user define the period in ticks,
and all computations are operated over that period. When reading a value,
it indicates the amount of events over that period too.
This member will be used later when frontends are created on the
fly by some tasks. It will also be usable later if we need to
support multiple config instances for example.
When a connection is closed on a stream interface, some iohandlers
will need to be informed in order to release some resources. This
normally happens upon a shutr+shutw. It is the equivalent of the
fd_delete() call which is done for real sockets, except that this
time we release internal resources.
It can also be used with real sockets because it does not cost
anything else and might one day be useful.
This one can be parsed on the "stick-table" after with the "store"
keyword. It will hold the number of connections matching the entry,
for use with ACLs or anything else.
The stick_tables will now be able to store extra data for a same key.
A limited set of extra data types will be defined and for each of them
an offset in the sticky session will be assigned at startup time. All
of this information will be stored in the stick table.
The extra data types will have to be specified after the new "store"
keyword of the "stick-table" directive, which will reserve some space
for them.
The name 'exps' and 'keys' in struct stksess was confusing because it was
the same name as in the table which holds all of them, while they only hold
one node each. Remove the trailing 's' to more clearly identify who's who.
Right now we're only able to store a server ID in a sticky session.
The goal is to be able to store anything whose size is known at startup
time. For this, we store the extra data before the stksess pointer,
using a negative offset. It will then be easy to cumulate multiple
data provided they each have their own offset.
It's very disturbing to see the "denied req" counter increase without
any other session counter moving. In fact, we can't count a rejected
TCP connection as "denied req" as we have not yet instanciated any
session at all. Let's use a new counter for that.
Now we're able to reject connections very early, so we need to use a
different counter for the connections that are received and the ones
that are accepted and converted into sessions, so that the rate limits
can still apply to the accepted ones. The session rate must still be
used to compute the rate limit, so that we can reject undesired traffic
without affecting the rate.
Analysers don't care (and must not care) about a few flags such as
BF_AUTO_CLOSE or BF_AUTO_CONNECT, so those flags should not be listed
in the BF_MASK_STATIC bitmask.
We should also recheck if some buffer flags should be ignored or not
in process_session() when deciding if we must loop again or not.
The conn_retries still lies in the session and its initialization depends
on the backend when it may not yet be known. Let's first move it to the
stream interface.
The connection timeout stored in the buffer has not been used since the
stream interface were introduced. Let's get rid of it as it's one of the
things that complicate factoring of the accept() functions.
We can disable the monitor-net rules on a listener if this flag is not
set in the listener's options. This will be useful when we don't want
to check that fe->addr is set or not for non-TCP frontends.
The new LI_O_TCP_RULES listener option indicates that some TCP rules
must be checked upon accept on this listener. It is now checked by
the frontend and the L4 rules are evaluated only in this case. The
flag is only set when at least one tcp-req rule is present in the
frontend.
The L4 rules check function has now been moved to proto_tcp.c where
it ought to be.
For a long time we had two large accept() functions, one for TCP
sockets instanciating proxies, and another one for UNIX sockets
instanciating the stats interface.
A lot of code was duplicated and both did not work exactly the same way.
Now we have a stream_sock layer accept() called for either TCP or UNIX
sockets, and this function calls the frontend-specific accept() function
which does the rest of the frontend-specific initialisation.
Some code is still duplicated (session & task allocation, stream interface
initialization), and might benefit from having an intermediate session-level
accept() callback to perform such initializations. Still there are some
minor differences that need to be addressed first. For instance, the monitor
nets should only be checked for proxies and not for other connection templates.
Last, we renamed l->private as l->frontend. The "private" pointer in
the listener is only used to store a frontend, so let's rename it to
eliminate this ambiguity. When we later support detached listeners
(eg: FTP), we'll add another field to avoid the confusion.
Just like we do on health checks, we should consider that ACLs that make
use of buffer data are layer 6 and not layer 4, because we'll soon have
to distinguish between pure layer 4 ACLs (without any buffer) and these
ones.
This ACL was missing in complex setups where the status of a remote site
has to be considered in switching decisions. Until there, using a server's
status in an ACL required to have a dedicated backend, which is a bit heavy
when multiple servers have to be monitored.
The code is now ready to support loading pattern from filesinto trees. For
that, it will be required that the ACL keyword has a flag ACL_MAY_LOOKUP
and that the expr is case sensitive. When that is true, the pattern will
have a flag ACL_PAT_F_TREE_OK to indicate that it is possible to feed the
tree instead of a usual pattern if the parsing function is able to do this.
The tree's root is pre-initialized in the pattern's value so that the
function can easily find it. At that point, if the parsing function decides
to use the tree, it just sets ACL_PAT_F_TREE in the return flags so that
the caller knows the tree has been used and the pattern can be recycled.
That way it will be possible to load some patterns into the tree when it
is compatible, and other ones as linear linked lists. A good example of
this might be IPv4 network entries : right now we support holes in masks,
but this very rare feature is not compatible with binary lookup in trees.
So the parser will be able to decide itself whether the pattern can go to
the tree or not.
If we want to be able to match ACLs against a lot of possible values, we
need to put those values in trees. That will only work for exact matches,
which is normally just what is needed.
Right now, only IPv4 and string matching are planned, but others might come
later.
This is used to disable persistence depending on some conditions (for
example using an ACL matching static files or a specific User-Agent).
You can see it as a complement to "force-persist".
In the configuration file, the force-persist/ignore-persist declaration
order define the rules priority.
Used with the "appsesion" keyword, it can also help reducing memory usage,
as the session won't be hashed the persistence is ignored.
Some servers do not completely conform with RFC2616 requirements for
keep-alive when they receive a request with "Connection: close". More
specifically, they don't bother using chunked encoding, so the client
never knows whether the response is complete or not. One immediately
visible effect is that haproxy cannot maintain client connections alive.
The second issue is that truncated responses may be cached on clients
in case of network error or timeout.
Óscar Frías Barranco reported this issue on Tomcat 6.0.20, and
Patrik Nilsson with Jetty 6.1.21.
Cyril Bonté proposed this smart idea of pretending we run keep-alive
with the server and closing it at the last moment as is already done
with option forceclose. The advantage is that we only change one
emitted header but not the overall behaviour.
Since some servers such as nginx are able to close the connection
very quickly and save network packets when they're aware of the
close negociation in advance, we don't enable this behaviour by
default.
"option http-pretend-keepalive" will have to be used for that, in
conjunction with "option http-server-close".
Using get_ip_from_hdr2() we can look for occurrence #X or #-X and
extract the IP it contains. This is typically designed for use with
the X-Forwarded-For header.
Using "usesrc hdr_ip(name,occ)", it becomes possible to use the IP address
found in <name>, and possibly specify occurrence number <occ>, as the
source to connect to a server. This is possible both in a server and in
a backend's source statement. This is typically used to use the source
IP previously set by a upstream proxy.
The transparent proxy address selection was set in the TCP connect function
which is not the most appropriate place since this function has limited
access to the amount of parameters which could produce a source address.
Instead, now we determine the source address in backend.c:connect_server(),
right after calling assign_server_address() and we assign this address in
the session and pass it to the TCP connect function. This cannot be performed
in assign_server_address() itself because in some cases (transparent mode,
dispatch mode or http_proxy mode), we assign the address somewhere else.
This change will open the ability to bind to addresses extracted from many
other criteria (eg: from a header).
We'll need another flag in the 'options' member close to PR_O_TPXY_*,
and all are used, so let's move this easy one to options2 (which are
already used for SQL checks).
