Mux connection is flagged with new QC_CF_IS_BACK if used on the backend
side. For now the only change is during traces, to be able to
differentiate frontend and backend usage.
Add counters to measure Rx buffers usage per QCS. This reused the newly
defined bdata_ctr type already used for Tx accounting.
Note that for now, <tot> value of bdata_ctr is not used. This is because
it is not easy to account for data accross contiguous buffers.
These values are displayed both on log/traces and "show quic" output.
Add accounting at qc_stream_desc level to be able to report the number
of allocated Tx buffers and the sum of their data. This represents data
ready for emission or already emitted and waiting on ACK.
To simplify this accounting, a new counter type bdata_ctr is defined in
quic_utils.h. This regroups both buffers and data counter, plus a
maximum on the buffer value.
These values are now displayed on QCS info used both on logline and
traces, and also on "show quic" output.
Previously, QUIC MUX application layer was installed and initialized via
MUX init. However, the latter stage involve I/O operations, for example
when using HTTP/3 with the emission of a SETTINGS frame.
Change this to prevent any I/O operations during MUX init. As such,
finalize app_ops callback is now called during the first invokation of
qcc_io_send(), in the context of MUX tasklet. To implement this, a new
application state value is added, to detect the transition from NULL to
INIT stage.
Introduce a new QCC field to track the current application layer state.
For the moment, only INIT and SHUT state are defined. This allows to
replace the older flag QC_CF_APP_SHUT.
This commit does not bring major changes. It is only necessary to permit
future evolutions on QUIC MUX. The only noticeable change is that QMUX
traces can now display this new field.
Dump <buf_in_flight> QCC field both in QUIC MUX traces and "show quic".
This could help to detect if MUX does not allocate enough buffers
compared to quic_conn current congestion window.
Reuse newly defined tot_time structure to measure various values related
to a QCS lifetime.
First, a timer is used to comptabilize the total QCS lifetime. Then, two
other timers are used to account the total time during which Tx from
stream layer to MUX is blocked, either on lack of buffer or due to
flow-control.
These three timers are reported in qmux_dump_qcs_info(). Thus, they are
available in traces and for QUIC MUX debug string sample.
Extract trace code to dump QCC and QCS instances into dedicated
functions named qmux_dump_qc{c,s}_info(). This will allow to easily
print QCC/QCS infos outside of traces.
The previous commit was a major rework for QUIC MUX sending process.
Following this, this patch cleans up a few elements that remains but can
be removed as they are duplicated.
Of notable changes, offset fields from QCS and QCC are removed. They are
both equivalent to flow control soft offsets.
A new function qcs_prep_bytes() is implemented. Its purpose is to return
the count of prepared data bytes not yet sent. It also replaces
qcs_need_sending().
Both QCS and QCC have their owned sent offset field. These fields store
the newest offset sent to the quic-conn layer. It is similar to QCS/QCC
flow control real offset. This patch removes them and replaces them by
the latter for code clarification.
MINOR: mux-quic: remove unneeded qcc.tx.sent_offsets field
This commit as a similar purpose as previous, except that it removes QCC
<sent_offsets> field, now equivalent to connection flow control real
offset.
This commit is a direct follow-up on the previous one. This time, it
deals with connection level flow control. Process is similar to stream
level : soft offset is incremented during snd_buf and real offset during
STREAM frame emission.
On MAX_DATA reception, both stream layer and QMUX is woken up if
necessary. One extra feature for conn level is the introduction of a new
QCC list to reference QCS instances. It will store instances for which
snd_buf callback has been interrupted on QCC soft offset reached. Every
stream instances is woken up on MAX_DATA reception if soft_offset is
unblocked.
This patch is the first of two to reimplement flow control emission
limits check. The objective is to account flow control earlier during
snd_buf stream callback. This should smooth transfers and prevent over
buffering on haproxy side if flow control limit is reached.
The current patch deals with stream level flow control. It reuses the
newly defined flow control type. Soft offset is incremented after HTX to
data conversion. If limit is reached, snd_buf is interrupted and stream
layer will subscribe on QCS.
On qcc_io_cb(), generation of STREAM frames is restricted as previously
to ensure to never surpass peer limits. Finally, flow control real
offset is incremented on lower layer send notification. Thus, it will
serve as a base offset for built STREAM frames. If limit is reached,
STREAM frames generation is suspended.
Each time QCS data flow control limit is reached, soft and real offsets
are reconsidered.
Finally, special care is used when flow control limit is incremented via
MAX_STREAM_DATA reception. If soft value is unblocked, stream layer
snd_buf is woken up. If real value is unblocked, qcc_io_cb() is
rescheduled.
Complete traces with information from qcc and qcs instances about
flow-control level. This should help to debug further issue on sending.
This must be backported up to 2.7.
Fix several warinings as this one:
src/qmux_trace.c:80:45: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘uint64_t’ {aka ‘const long long unsigned int’} [-Werror=format=]
80 | chunk_appendf(&trace_buf, " qcs=%p .id=%lu .st=%s",
| ~~^
| |
| long unsigned int
| %llu
81 | qcs, qcs->id,
| ~~~~~~~
| |
| uint64_t {aka const long long unsigned int}
compilation terminated due to -Wfatal-errors.
Cast remaining uint64_t variables as ullong with %llu as printf format and size_t
others as ulong with %lu as printf format.
Thank you to Ilya for having reported this issue in GH #1899.
Must be backported to 2.6
Clean up quic sources by adjusting headers list included depending
on the actual dependency of each source file.
On some occasion, xprt_quic.h was removed from included list. This is
useful to help reducing the dependency on this single file and cleaning
up QUIC haproxy architecture.
This should be backported up to 2.6.
ull is a typedef to unsigned long long. It is only defined in
xprt_quic-t.h. Its usage should be limited over time to reduce xprt_quic
dependency over the whole code. It can be replaced by ullong typedef
from compat.h.
For the moment, ull references have been replaced in qmux_trace module.
They were only used for printf format and has been replaced by the true
variable type.
This change is useful to reduce dependencies on xprt_quic in other
files.
This should be backported up to 2.6.
QUIC MUX implements several APIs to interface with stream, quic-conn and
app-ops layers. It is planified to better separate this roles, possibly
by using several files.
The first step is to extract QUIC MUX traces in a dedicated source
files. This will allow to reuse traces in multiple files.
The main objective is to be
able to support both TCP and HTTP proxy mode with a common base and add
specialized modules on top of it.
This should be backported up to 2.6.
