IPv4 and IPv6 addresses are now stored into temp_pattern instead of
the dirty hack consisting into storing them into the consumer's target
address.
Some refactoring should now be possible since the methods used to fetch
source and destination addresses are similar between patterns and ACLs.
All ACL fetches which return integer value now store the result into
the temporary pattern struct. All ACL matches which rely on integer
also get their value there.
Note: the pattern data types are not set right now.
This is 1.5-specific. It causes issues with transparent source binding involving
hdr_ip. We must not try to bind() to a foreign address when the family is not set,
and we must set the family when an address is set.
Daniel Rankov reported that "option nolinger" is inefficient on backends.
The reason is that it is set on the file descriptor only, which does not
prevent haproxy from performing a clean shutdown() before closing. We must
set the flag on the stream_interface instead if we want an RST to be emitted
upon active close.
Stream interfaces used to distinguish between client and server addresses
because they were previously of different types (sockaddr_storage for the
client, sockaddr_in for the server). This is not the case anymore, and this
distinction is confusing at best and has caused a number of regressions to
be introduced in the process of converting everything to full-ipv6. We can
now remove this and have a much cleaner code.
Many inet_ntop calls were partially right, which was hard to detect given
the complex combinations. Some of them were relying on the listener's proto
instead of the address itself, which could have been different when dealing
with an accept-proxy connection.
The new addr_to_str() function does the dirty job and returns the family, which
makes it particularly suited to calls from switch/case statements. A large number
of if/else statements were removed and the stats output could even be cleaned up
in the case of session dump.
As a side effect of doing this, the resulting code is smaller by almost 1kB.
All changed parts have been tested and provided expected output.
This pattern fetch function extracts the value of the rdp cookie <name> as
a string and uses this value to match. This enables implementation of
persistence based on the mstshash cookie. This is typically done if there
is no msts cookie present.
This differs from "balance rdp-cookie" in that any balancing algorithm may
be used and thus the distribution of clients to backend servers is not
linked to a hash of the RDP cookie. It is envisaged that using a balancing
algorithm such as "balance roundrobin" or "balance leastconnect" will lead
to a more even distribution of clients to backend servers than the hash
used by "balance rdp-cookie".
Example :
listen tse-farm
bind 0.0.0.0:3389
# wait up to 5s for an RDP cookie in the request
tcp-request inspect-delay 5s
tcp-request content accept if RDP_COOKIE
# apply RDP cookie persistence
persist rdp-cookie
# Persist based on the mstshash cookie
# This is only useful makes sense if
# balance rdp-cookie is not used
stick-table type string size 204800
stick on rdp_cookie(mstshash)
server srv1 1.1.1.1:3389
server srv1 1.1.1.2:3389
Mark Brooks reported that commit 1b4b7c broke tproxy in 1.5-dev6. Nick
Chalk tracked the issue down to a missing address family setting in
tcp_bind_socket() which resulted in a failure to use get_addr_len().
This issue is 1.5-specific.
John Helliwell reported a runtime issue on Solaris since 1.5-dev5. Traces
show that connect() returns EINVAL, which means the socket length is not
appropriate for the family. Solaris does not like being called with sizeof
and needs the address family's size on sockaddr_storage.
The fix consists in adding a get_addr_len() function which returns the
socket's address length based on its family. Tests show that this works
for both IPv4 and IPv6 addresses.
Since IPv6 is a different type than IPv4, the pattern fetch functions
src6 and dst6 were added. IPv6 stick-tables can also fetch IPv4 addresses
with src and dst. In this case, the IPv4 addresses are mapped to their
IPv6 counterpart, according to RFC 4291.
It's very annoying that frontend and backend stats are merged because we
don't know what we're observing. For instance, if a "listen" instance
makes use of a distinct backend, it's impossible to know what the bytes_out
means.
Some points take care of not updating counters twice if the backend points
to the frontend, indicating a "listen" instance. The thing becomes more
complex when we try to add support for server side keep-alive, because we
have to maintain a pointer to the backend used for last request, and to
update its stats. But we can't perform such comparisons anymore because
the counters will not match anymore.
So in order to get rid of this situation, let's have both frontend AND
backend stats in the "struct proxy". We simply update the relevant ones
during activity. Some of them are only accounted for in the backend,
while others are just for frontend. Maybe we can improve a bit on that
later, but the essential part is that those counters now reflect what
they really mean.
This patch turns internal server addresses to sockaddr_storage to
store IPv6 addresses, and makes the connect() function use it. This
code already works but some caveats with getaddrinfo/gethostbyname
still need to be sorted out while the changes had to be merged at
this stage of internal architecture changes. So for now the config
parser will not emit an IPv6 address yet so that user experience
remains unchanged.
This change should have absolutely zero user-visible effect, otherwise
it's a bug introduced during the merge, that should be reported ASAP.
When doing a connect() on a stream interface, some information is needed
from the server and from the backend. In some situations, we don't have
a server and only a backend (eg: peers). In other cases, we know we have
an applet and we don't want to connect to anything, but we'd still like
to have the info about the applet being used.
For this, we now store a pointer to the "target" into the stream interface.
The target describes what's on the other side before trying to connect. It
can be a server, a proxy or an applet for now. Later we'll probably have
descriptors for multiple-stage chains so that the final information may
still be found.
This will help removing many specific cases in the code. It already made
it possible to remove the "srv" and "be" parameters to tcpv4_connect_server().
By passing a negative value to the "mss" argument of "bind" lines, it
becomes possible to subtract this value to the MSS advertised by the
client, which results in segments smaller than advertised. The effect
is useful with some TCP stacks which ACK less often when segments are
not full, because they only ACK every other full segment as suggested
by RFC1122.
NOTE: currently this has no effect on Linux kernel 2.6, a kernel patch
is still required to change the MSS of established connections.
Enhance pattern convs and fetch argument parsing, now fetchs and convs callbacks used typed args.
Add more details on error messages on parsing pattern expression function.
Update existing pattern convs and fetchs to new proto.
Create stick table key type "binary".
Manage Truncation and padding if pattern's fetch-converted result don't match table key size.
Add the address and port to the error message of the proxy socket that caused
the error. This can be helpful when several listening addresses are used in a
proxy.
Edit: since we now also support unix sockets (which already report their
path), better move the address reporting to proto_tcp.c by analogy.
-Willy
Pattern fetches relying on destination address must first fetch
the address if it has not been done yet.
(cherry picked from commit 21abf441feb318b2ccd7df590fd89e9e824627f6)
In case of HTTP keepalive processing, we want to release the counters tracked
by the backend. Till now only the second set of counters was released, while
it could have been assigned by the frontend, or the backend could also have
assigned the first set. Now we reuse to unused bits of the session flags to
mark which stick counters were assigned by the backend and to release them as
appropriate.
The assumption that there was a 1:1 relation between tracked counters and
the frontend/backend role was wrong. It is perfectly possible to track the
track-fe-counters from the backend and the track-be-counters from the
frontend. Thus, in order to reduce confusion, let's remove this useless
{fe,be} reference and simply use {1,2} instead. The keywords have also been
renamed in order to limit confusion. The ACL rule action now becomes
"track-sc{1,2}". The ACLs are now "sc{1,2}_*" instead of "trk{fe,be}_*".
That means that we can reasonably document "sc1" and "sc2" (sticky counters
1 and 2) as sort of patterns that are available during the whole session's
life and use them just like any other pattern.
It began to be problematic to have "tcp-request" followed by an
immediate action, as sometimes it was a keyword indicating a hook
or setting ("content" or "inspect-delay") and sometimes it was an
action.
Now the prefix for connection-level tcp-requests is "tcp-request connection"
and the ones processing contents remain "tcp-request contents".
This has allowed a nice simplification of the config parser and to
clean up the doc a bit. Also now it's a bit more clear why tcp-request
connection are not allowed in backends.
Doing so allows us to track counters from backends or depending on contents.
For instance, it now becomes possible to decide to track a connection based
on a Host header if enough time is granted to parse the HTTP request. It is
also possible to just track frontend counters in the frontend and unconditionally
track backend counters in the backend without having to write complex rules.
The first track-fe-counters rule executed is used to track counters for
the frontend, and the first track-be-counters rule executed is used to track
counters for the backend. Nothing prevents a frontend from setting a track-be
rule nor a backend from setting a track-fe rule. In fact these rules are
arbitrarily split between FE and BE with no dependencies.
Having a single tracking pointer for both frontend and backend counters
does not work. Instead let's have one for each. The keyword has changed
to "track-be-counters" and "track-fe-counters", and the ACL "trk_*"
changed to "trkfe_*" and "trkbe_*".
It was not normal to have counter fetches in proto_tcp.c. The only
reason was that the key based on the source address was fetched there,
but now we have split the key extraction and data processing, we must
move that to a more appropriate place. Session seems OK since the
counters are all manipulated from here.
Also, since we're precisely counting number of connections with these
ACLs, we rename them src_conn_cnt and src_updt_conn_cnt. This is not
a problem right now since no version was emitted with these keywords.
This patch adds the ability to set a pointer in the session to an
entry in a stick table which holds various counters related to a
specific pattern.
Right now the syntax matches the target syntax and only the "src"
pattern can be specified, to track counters related to the session's
IPv4 source address. There is a special function to extract it and
convert it to a key. But the goal is to be able to later support as
many patterns as for the stick rules, and get rid of the specific
function.
The "track-counters" directive may only be set in a "tcp-request"
statement right now. Only the first one applies. Probably that later
we'll support multi-criteria tracking for a single session and that
we'll have to name tracking pointers.
No counter is updated right now, only the refcount is. Some subsequent
patches will have to bring that feature.
This ACL's count can change along the session's life because it depends
on other sessions' activity. Switch it to volatile since any session
could appear while evaluating the ACLs.
Sometimes it's necessary to be able to perform some "layer 6" analysis
in the backend. TCP request rules were not available till now, although
documented in the diagram. Enable them in backend now.
When an entry already exists, we just need to update its expiration
timer. Let's have a dedicated function for that instead of spreading
open code everywhere.
This change also ensures that an update of an existing sticky session
really leads to an update of its expiration timer, which was apparently
not the case till now. This point needs to be checked in 1.4.
This change makes use of the stick-tables to keep track of any source
address activity. Two ACLs make it possible to check the count of an
entry or update it and act accordingly. The typical usage will be to
reject a TCP request upon match of an excess value.
It's very disturbing to see the "denied req" counter increase without
any other session counter moving. In fact, we can't count a rejected
TCP connection as "denied req" as we have not yet instanciated any
session at all. Let's use a new counter for that.
The new LI_O_TCP_RULES listener option indicates that some TCP rules
must be checked upon accept on this listener. It is now checked by
the frontend and the L4 rules are evaluated only in this case. The
flag is only set when at least one tcp-req rule is present in the
frontend.
The L4 rules check function has now been moved to proto_tcp.c where
it ought to be.
For a long time we had two large accept() functions, one for TCP
sockets instanciating proxies, and another one for UNIX sockets
instanciating the stats interface.
A lot of code was duplicated and both did not work exactly the same way.
Now we have a stream_sock layer accept() called for either TCP or UNIX
sockets, and this function calls the frontend-specific accept() function
which does the rest of the frontend-specific initialisation.
Some code is still duplicated (session & task allocation, stream interface
initialization), and might benefit from having an intermediate session-level
accept() callback to perform such initializations. Still there are some
minor differences that need to be addressed first. For instance, the monitor
nets should only be checked for proxies and not for other connection templates.
Last, we renamed l->private as l->frontend. The "private" pointer in
the listener is only used to store a frontend, so let's rename it to
eliminate this ambiguity. When we later support detached listeners
(eg: FTP), we'll add another field to avoid the confusion.
The 'client.c' file now only contained frontend-specific functions,
so it has naturally be renamed 'frontend.c'. Same for client.h. This
has also been an opportunity to remove some cross references from
files that should not have depended on it.
In the end, this file should contain a protocol-agnostic accept()
code, which would initialize a session, task, etc... based on an
accept() from a lower layer. Right now there are still references
to TCP.
Some ACLs in the client ought to belong to proto_tcp, or protocols.
This file should only contain frontend-specific information and will
be renamed that way in next commit.
Some functions which act on generic buffer contents without being
tcp-specific were historically in proto_tcp.c. This concerns ACLs
and RDP cookies. Those have been moved away to more appropriate
locations. Ideally we should create some new files for each layer6
protocol parser. Let's do that later.
Just like we do on health checks, we should consider that ACLs that make
use of buffer data are layer 6 and not layer 4, because we'll soon have
to distinguish between pure layer 4 ACLs (without any buffer) and these
ones.
