The default proxy was passed as a variable to all parsers instead of a
const, which is not without risk, especially when some timeout parsers used
to make some int pointers point to the default values for comparisons. We
want to be certain that none of these parsers will modify the defaults
sections by accident, so it's important to mark this proxy as const.
This patch touches all occurrences found (89).
This makes the code more readable and less prone to copy-paste errors.
In addition, it allows to place some __builtin_constant_p() predicates
to trigger a link-time error in case the compiler knows that the freed
area is constant. It will also produce compile-time error if trying to
free something that is not a regular pointer (e.g. a function).
The DEBUG_MEM_STATS macro now also defines an instance for ha_free()
so that all these calls can be checked.
178 occurrences were converted. The vast majority of them were handled
by the following Coccinelle script, some slightly refined to better deal
with "&*x" or with long lines:
@ rule @
expression E;
@@
- free(E);
- E = NULL;
+ ha_free(&E);
It was verified that the resulting code is the same, more or less a
handful of cases where the compiler optimized slightly differently
the temporary variable that holds the copy of the pointer.
A non-negligible amount of {free(str);str=NULL;str_len=0;} are still
present in the config part (mostly header names in proxies). These
ones should also be cleaned for the same reasons, and probably be
turned into ist strings.
this is pure cleanup, no need to backport
2116 if ((end - 1) == (payload + strlen(PAYLOAD_PATTERN))) {
2117 /* if the payload pattern is at the end */
2118 s->pcli_flags |= PCLI_F_PAYLOAD;
CID 1399833 (#1 of 1): Unused value (UNUSED_VALUE)assigned_value: Assigning value from reql to ret here, but that stored value is overwritten before it can be used.
2119 ret = reql;
2120 }
This patch fixes the issue #1048.
FD dumps are not always easy to match against netstat dumps, and often
require an lsof as a third dump. Let's emit the socket family, and the
local and remore ports when the FD is an IPv4/IPv6 socket, this will
significantly ease the matching.
A file descriptor which maps to a connection but has more than one
thread in its mask, or an FD handle that doesn't correspond to the FD,
or wiht no mux context, or an FD with no thread in its mask, or with
more than 1 million events is flagged as suspicious.
Now the show_fd helpers at the transport and mux levels return an integer
which indicates whether or not the inspected entry looks suspicious. When
an entry is reported as suspicious, "show fd" will suffix it with an
exclamation mark ('!') in the dump, that is supposed to help detecting
them.
For now, helpers were adjusted to adapt to the new API but none of them
reports any suspicious entry yet.
Just like we did for the muxes, now the transport layers will have the
ability to provide helpers to report more detailed information about their
internal context. When the helper is not known, the pointer continues to
be dumped as-is if it's not NULL. This way a transport with no context nor
dump function will not add a useless "xprt_ctx=(nil)" but the pointer will
be emitted if valid or if a helper is defined.
These ones are definitely missing from some dumps, let's report them! We
print the xprt's name instead of its useless pointer, as well as its ctx
when xprt is not NULL.
Over time the code has uglified, casting fdt.owner as a struct connection
for about everything. Let's have a const struct connection* there and take
this opportunity for passing all fields as const as well.
Additionally a misplaced closing parenthesis on the output was fixed.
conn_fd_handler() is 100% specific to socket code. It's about time
it moves to sock.c which manipulates socket FDs. With it comes
conn_fd_check() which tests for the socket's readiness. The ugly
connection status check at the end of the iocb was moved to an inlined
function in connection.h so that if we need it for other socket layers
it's not too hard to reuse.
The code was really only moved and not changed at all.
This function will be useful to check if the keyword is already registered.
Also add a define for the max number of args.
This will be needed by a next patch to fix a bug and will have to be
backported.
Following the patch b4daee ("MINOR: sock: add a check against cross
worker<->master socket activities"), this patch adds a dedicated applet
for the master CLI. It ensures that the CLI connection can't be
used with the master rights in the case of bugs.
Now we define a new sock_accept_iocb() for socket-based stream protocols
and use it as a wrapper for listener_accept() which now takes a listener
and not an FD anymore. This will allow the receiver's I/O cb to be
redefined during registration, and more specifically to get rid of the
hard-coded hacks in protocol_bind_all() made for syslog.
The previous ->accept() callback in the protocol was removed since it
doesn't have anything to do with accept() anymore but is more generic.
A few places where listener_accept() was compared against the FD's IO
callback for debugging purposes on the CLI were updated.
This listener flag indicates whether the receiver part of the listener
is specific to the master or to the workers. In practice it's only used
by the master's CLI right now. It's used to know whether or not the FD
must be closed before forking the workers. For this reason it's way more
of a receiver's property than a listener's property, so let's move it
there under the name RX_F_MWORKER. The rest of the code remains
unchanged.
We have to count unstoppable jobs which correspond to worker sockpairs, in
order to know when to count. However the way it's currently done is quite
awkward because these are counted when stopping making the stop mechanism
non-idempotent. This is definitely something we want to fix before stopping
by protocol or our listeners count will quickly go wrong. Now they are
counted when the listeners are created.
The remaining proxy states were only used to distinguish an enabled
proxy from a disabled one. Due to the initialization order, both
PR_STNEW and PR_STREADY were equivalent after startup, and they
would only differ from PR_STSTOPPED when the proxy is disabled or
shutdown (which is effectively another way to disable it).
Now we just have a "disabled" field which allows to distinguish them.
It's becoming obvious that start_proxies() is only used to print a
greeting message now, that we'd rather get rid of. Probably that
zombify_proxy() and stop_proxy() should be merged once their
differences move to the right place.
We'll need this so that it can return pointers to stacked protocol in
the future (for QUIC). In addition this removes a lot of tests for
protocol validity in the callers.
Some of them were checked further apart, or after a call to
str2listener() and they were simplified as well.
There's still a trick, we can fail to return a protocol in case the caller
accepts an fqdn for use later. This is what servers do and in this case it
is valid to return no protocol. A typical example is:
server foo localhost:1111
If a file descriptor was passed, we can optionally return it. This will
be useful for listening sockets which are both a pre-bound FD and a ready
socket.
These flags indicate whether the call is made to fill a bind or a server
line, or even just send/recv calls (like logs or dns). Some special cases
are made for outgoing FDs (e.g. pipes for logs) or socket FDs (e.g external
listeners), and there's a distinction between stream or dgram usage that's
expected to significantly help str2sa_range() proceed appropriately with
the input information. For now they are not used yet.
It's the receiver's FD that's inherited from the parent process, not
the listener's so the flag must move to the receiver so that appropriate
actions can be taken.
Some socket settings used to be retrieved via the listener and the
bind_conf. Now instead we use the receiver and its settings whenever
appropriate. This will simplify the removal of the dependency on the
listener.
The netns is common to all listeners/receivers and is used to bind the
listening socket so it must be in the receiver settings and not in the
listener. This removes some yet another set of unnecessary loops.
The interface is common to all listeners/receivers and is used to bind
the listening socket so it must be in the receiver settings and not in
the listener. This removes some unnecessary loops.
Now we don't limit ourselves to listeners found in proxies nor peers
anymore, we're instead scanning all known FDs for those marked with
".exported=1". Just doing so has significantly simplified the code,
and will later allow to yield while sending FDs if desired.
When it comes to retrieving a possible namespace name or interface
name, for now this is only performed on listeners since these are the
only ones carrying such info. Once this moves somewhere else, we'll
be able to also pass these info for UDP receivers for example, with
only tiny changes.
During a reload operation, we used to send listener options associated
with each passed file descriptor. These were passed as binary contents
for the size of the "options" field in the struct listener. This means
that any flag value change or field size change would be problematic,
the former failing to properly grab certain options, the latter possibly
causing permanent failures during this operation.
Since these two previous commits:
MINOR: reload: determine the foreing binding status from the socket
BUG/MINOR: reload: detect the OS's v6only status before choosing an old socket
we don't need this anymore as the values are determined from the file
descriptor itself.
Let's just turn the previous 32 bits to vestigal space, send them as
zeroes and ignore them on receipt. The only possible side effect is if
someone would want to roll back from a 2.3 to 2.2 or earlier, such options
might be ignored during this reload. But other forthcoming changes might
make this fail as well anyway so that's not a reason for keeping this
behavior.
The FD takeover operation might have certain impacts explaining
unexpected activities, so it's important to report such a counter
there. We thus count the number of times a thread has stolen an
FD from another thread.
DEBUG_FD was added by commit 38e8a1c in 2.2-dev, and "show fd" was
slightly modified to still allow to print orphaned/closed FDs if their
count is non-null. But bypassing the existing test made it possible
to dereference fdt.owner which can be null. Let's adjust the condition
to avoid this.
No backport is needed.
When DEBUG_FD is set at build time, we'll keep a counter of per-FD events
in the fdtab. This counter is reported in "show fd" even for closed FDs if
not zero. The purpose is to help spot situations where an apparently closed
FD continues to be reported in loops, or where some events are dismissed.
Fix the semicolon escaping which must be handled in the master CLI,
the commands were wrongly splitted and could be forwarded partially to
the target CLI.
The master CLI must not do the escaping since it forwards the commands
to another CLI. It should be able to split into words by taking care of
the escaping, but must not remove the forwarded backslashes.
This fix do the same thing as the previous patch applied to the
cli_parse_request() function, by taking care of the escaping during the
word split, but it also remove the part which was removing the
backslashes from the forwarded command.
It was not possible to escape spaces over the CLI, making impossible the
insertion of new ACL entries with spaces from the CLI.
This patch fixes the escaping of spaces over the CLI.
It is now possible to launch "add acl agents.acl My\ User\ Agent" over
the CLI.
Could be backported in all stable branches.
Should fix issue #400.
This one was confusingly called, I thought it was the cumulated number
of streams but it's the number of calls to process_stream(). Let's make
this clearer.
empty_rq and long_rq are per-loop so it makes sense to group them
together with the loop count. In addition since ctxsw and tasksw
apply in the context of these counters, let's move them as well.
More precisely the difference between wake_tasks and long_rq should
roughly correspond to the number of inter-task messages. Visually
it's much easier to spot ratios of wakeup causes now.
We have poll_drop, poll_dead and poll_skip which are confusingly named
like their poll_io and poll_exp counterparts except that they are not
per poll() call but per-fd. This patch renames them to poll_drop_fd(),
poll_dead_fd() and poll_skip_fd() for this reason.
The "show activity" output mentions a number of indicators to explain
wake up reasons but doesn't have the number of times poll() sees some
I/O. And given that multiple events can happen simultaneously, it's
not always possible to deduce this metric by subtracting.
This patch adds a new "poll_io" counter that allows one to see how
often poll() returns with at least one active FD. This should help
detect stuck events and measure various ratios of poll sub-metrics.
Since 2.1-dev2, with commit 305d5ab46 ("MAJOR: fd: Get rid of the fd cache.")
we don't have the fd_lock anymore and as such its acitvity counter is always
zero. Let's remove it from the struct and from "show activity" output, as
there are already plenty of indicators to look at.
The cache line comment in the struct activity was updated to reflect
reality as it looks like another one already got removed in the past.
Getting rid of this warning is cleaner solved using a 'fall through' comment,
because it clarifies intent to a human reader.
This patch adjust a few places that cause -Wimplicit-fallthrough to trigger:
- Fix typos in the comment.
- Remove redundant 'no break' that trips up gcc from comment.
- Move the comment out of the block when the 'case' is completely surrounded
by braces.
- Add comments where I could determine that the fall through was intentional.
Changes tested on
gcc (Debian 9.3.0-13) 9.3.0
Copyright (C) 2019 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
using
make -j4 all TARGET=linux-glibc USE_OPENSSL=1 USE_LUA=1 USE_ZLIB=1 USE_PCRE2=1 USE_PCRE2_JIT=1 USE_GETADDRINFO=1
This patch fixes all the leftovers from the include cleanup campaign. There
were not that many (~400 entries in ~150 files) but it was definitely worth
doing it as it revealed a few duplicates.
Most of the files dealing with error reports have to include log.h in order
to access ha_alert(), ha_warning() etc. But while these functions don't
depend on anything, log.h depends on a lot of stuff because it deals with
log-formats and samples. As a result it's impossible not to embark long
dependencies when using ha_warning() or qfprintf().
This patch moves these low-level functions to errors.h, which already
defines the error codes used at the same places. About half of the users
of log.h could be adjusted, sometimes revealing other issues such as
missing tools.h. Interestingly the total preprocessed size shrunk by
4%.
There's no point splitting the file in two since only cfgparse uses the
types defined there. A few call places were updated and cleaned up. All
of them were in C files which register keywords.
There is nothing left in common/ now so this directory must not be used
anymore.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
extern struct dict server_name_dict was moved from the type file to the
main file. A handful of inlined functions were moved at the bottom of
the file. Call places were updated to use server-t.h when relevant, or
to simply drop the entry when not needed.
The files remained mostly unchanged since they were OK. However, half of
the users didn't need to include them, and about as many actually needed
to have it and used to find functions like srv_currently_usable() through
a long chain that broke when moving the file.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
Almost no change except moving the cli_kw struct definition after the
defines. Almost all users had both types&proto included, which is not
surprizing since this code is old and it used to be the norm a decade
ago. These places were cleaned.
Just some minor reordering, and the usual cleanup of call places for
those which didn't need it. We don't include the whole tools.h into
stats-t anymore but just tools-t.h.
The type file was slightly tidied. The cli-specific APPCTX_CLI_ST1_* flag
definitions were moved to cli.h. The type file was adjusted to include
buf-t.h and not the huge buf.h. A few call places were fixed because they
did not need this include.
Initially it looked like this could have been placed into auth.h or
stats.h but it's not the case as it's what makes the link between them
and the HTTP layer. However the file needed to be split in two. Quite
a number of call places were dropped because these were mostly leftovers
from the early days where the stats and cli were packed together.
The cfg_peers external declaration was moved to the main file instead
of the type one. A few types were still missing from the proto, causing
warnings in the functions prototypes (proxy, stick_table).
All includes that were not absolutely necessary were removed because
checks.h happens to very often be part of dependency loops. A warning
was added about this in check-t.h. The fields, enums and structs were
a bit tidied because it's particularly tedious to find anything there.
It would make sense to split this in two or more files (at least
extract tcp-checks).
The file was renamed to the singular because it was one of the rare
exceptions to have an "s" appended to its name compared to the struct
name.
The TASK_IS_TASKLET() macro was moved to the proto file instead of the
type one. The proto part was a bit reordered to remove a number of ugly
forward declaration of static inline functions. About a tens of C and H
files had their dependency dropped since they were not using anything
from task.h.
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
This one is particularly tricky to move because everyone uses it
and it depends on a lot of other types. For example it cannot include
arg-t.h and must absolutely only rely on forward declarations to avoid
dependency loops between vars -> sample_data -> arg. In order to address
this one, it would be nice to split the sample_data part out of sample.h.
It was moved as-is, except for extern declaration of pattern_reference.
A few C files used to include it but didn't need it anymore after having
been split apart so this was cleaned.
One function prototype makes reference to struct mworker_proc which was
not defined there but in global.h instead. This definition, along with
the PROC_O_* fields were moved to mworker-t.h instead.
A few includes were missing in each file. A definition of
struct polled_mask was moved to fd-t.h. The MAX_POLLERS macro was
moved to defaults.h
Stdio used to be silently inherited from whatever path but it's needed
for list_pollers() which takes a FILE* and which can thus not be
forward-declared.
And also rename standard.c to tools.c. The original split between
tools.h and standard.h dates from version 1.3-dev and was mostly an
accident. This patch moves the files back to what they were expected
to be, and takes care of not changing anything else. However this
time tools.h was split between functions and types, because it contains
a small number of commonly used macros and structures (e.g. name_desc)
which in turn cause the massive list of includes of tools.h to conflict
with the callers.
They remain the ugliest files of the whole project and definitely need
to be cleaned and split apart. A few types are defined there only for
functions provided there, and some parts are even OS-specific and should
move somewhere else, such as the symbol resolution code.
The protocol.h files are pretty low in the dependency and (sadly) used
by some files from common/. Almost nothing was changed except lifting a
few comments.
This moves types/activity.h to haproxy/activity-t.h and
proto/activity.h to haproxy/activity.h.
The macros defining the bit field values for the profiling variable
were moved to the type file to be more future-proof.
This is the beginning of the move and cleanup of memory.h. This first
step only extracts type definitions and basic macros that are needed
by the files which reference a pool. They're moved to pool-t.h (since
"pool" is more obvious than "memory" when looking for pool-related
stuff). 3 files which didn't need to include the whole memory.h were
updated.
types/freq_ctr.h was moved to haproxy/freq_ctr-t.h and proto/freq_ctr.h
was moved to haproxy/freq_ctr.h. Files were updated accordingly, no other
change was applied.
This one is included almost everywhere and used to rely on a few other
.h that are not needed (unistd, stdlib, standard.h). It could possibly
make sense to split it into multiple parts to distinguish operations
performed on timers and the internal time accounting, but at this point
it does not appear much important.
Half of the users of this include only need the type definitions and
not the manipulation macros nor the inline functions. Moves the various
types into mini-clist-t.h makes the files cleaner. The other one had all
its includes grouped at the top. A few files continued to reference it
without using it and were cleaned.
In addition it was about time that we'd rename that file, it's not
"mini" anymore and contains a bit more than just circular lists.
This one used to be stored into debug.h but the debug tools got larger
and require a lot of other includes, which can't use BUG_ON() anymore
because of this. It does not make sense and instead this macro should
be placed into the lower includes and given its omnipresence, the best
solution is to create a new bug.h with the few surrounding macros needed
to trigger bugs and place assertions anywhere.
Another benefit is that it won't be required to add include <debug.h>
anymore to use BUG_ON, it will automatically be covered by api.h. No
less than 32 occurrences were dropped.
The FSM_PRINTF macro was dropped since not used at all anymore (probably
since 1.6 or so).
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
A few fields, including a generic list entry, were added to the CLI context
by commit 300decc8d9 ("MINOR: cli: extend the CLI context with a list and
two offsets"). It turns out that the list entry (l0) is solely used to
consult rings and that the generic ring_write() code is restricted to a
consumer on the CLI due to this, which was not the initial intent. Let's
make it a general purpose wait_entry field that is properly initialized
during appctx_init(). This will allow any applet to wait on a ring, not
just the CLI.
Since the fix 5fd3b28 ("BUG/MEDIUM: cli: _getsocks must send the peers
sockets") for bug #443. The code which sends the socket for the peers
and the proxies is duplicated. This patch move this code in a separated
function.
This bug prevents to reload HAProxy when you have both the seamless
reload (-x / expose-fd listeners) and the peers.
Indeed the _getsocks command does not send the FDs of the peers
listeners, so if no reuseport is possible during the bind, the new
process will fail to bind and exits.
With this feature, it is not possible to fallback on the SIGTTOU method
if we didn't receive all the sockets, because you can't close() the
sockets of the new process without closing those of the previous
process, they are the same.
Should fix bug #443.
Must be backported as far as 1.8.
When trying to start HAProxy with the master CLI and more than one
program in the configuration, it refuses to start with:
[ALERT] 013/132926 (1378) : parsing [cur--1:0] : proxy 'MASTER', another server named 'cur--1' was already defined at line 0, please use distinct names.
[ALERT] 013/132926 (1378) : Fatal errors found in configuration.
The problem is that haproxy tries to create a server for the MASTER
proxy but only the worker are supposed to be in the server list.
Fix issue #446.
Must be backported as far as 2.0.
We use it half times for the global_listener_queue and half times
for a proxy's queue and this requires the callers to take care of
these. Let's split it in two versions, the current one working only
on the global queue and another one dedicated to proxies for the
per-proxy queues. This cleans up quite a bit of code.
The io_release() callback of the cli_kw is supposed to be used to clean
what an io_handler() has made. It is called once the work in the IO
handler is finished, or when the connection was aborted by the client.
This patch fixes a bug where the io_release callback was called even
when the parse() callback failed. Which means that the io_release() could
called even if the io_handler() was not called.
Should be backported in every versions that have a cli_kw->release().
(as far as 1.7)
Some commands like the debug ones are not enabled by default but can be
useful on some production environments. In order to avoid the temptation
of using them incorrectly, let's introduce an "expert" mode for a CLI
connection, which allows some commands to appear and be used. It is
enabled by command "expert-mode on" which is not listed by default.
Instead of using the same type for regular linked lists and "autolocked"
linked lists, use a separate type, "struct mt_list", for the autolocked one,
and introduce a set of macros, similar to the LIST_* macros, with the
MT_ prefix.
When we use the same entry for both regular list and autolocked list, as
is done for the "list" field in struct connection, we know have to explicitely
cast it to struct mt_list when using MT_ macros.
Since commit 7ac0e35f2 in 1.9-dev1 ("MAJOR: fd: compute the new fd polling
state out of the fd lock") we've started to update the FD POLLED bit a
bit more aggressively. Lately with the removal of the FD cache, this bit
is always equal to the ACTIVE bit. There's no point continuing to watch
it and update it anymore, all it does is create confusion and complicate
the code. One interesting side effect is that it now becomes visible that
all fd_*_{send,recv}() operations systematically call updt_fd_polling(),
except fd_cant_recv()/fd_cant_send() which never saw it change.
Some CLI parsers are currently abusing the CLI context types such as
pointers to stuff longs into them by lack of room. But the context is
80 bytes while cli is only 48, thus there's some room left. This patch
adds a list element and two size_t usable as various offsets. The list
element is initialized.
There were 221 places where a status message or an error message were built
to be returned on the CLI. All of them were replaced to use cli_err(),
cli_msg(), cli_dynerr() or cli_dynmsg() depending on what was expected.
This removed a lot of duplicated code because most of the times, 4 lines
are replaced by a single, safer one.
Right now we used to have extremely inconsistent states to report output,
one is CLI_ST_PRINT which prints constant message cli->msg with the
assigned severity, and CLI_ST_PRINT_FREE which prints dynamically
allocated cli->err with severity LOG_ERR, and nothing in between,
eventhough it's useful to be able to report dynamically allocated
messages as well as constant error messages.
This patch adds two extra states, which are not particularly well named
given the constraints imposed by existing ones. One is CLI_ST_PRINT_ERR
which prints a constant error message. The other one is CLI_ST_PRINT_DYN
which prints a dynamically allocated message. By doing so we maintain
the compatibility with current code.
It is important to keep in mind that we cannot pre-initialize pointers
and automatically detect what message type it is based on the assigned
fields, because the CLI's context is in a union shared with all other
users, thus unused fields contain anything upon return. This is why we
have no choice but using 4 states. Keeping the two fields <msg> and
<err> remains useful because one is const and not the other one, and
this catches may copy-paste mistakes. It's just that <err> is pretty
confusing here, it should be renamed.
Now that the architecture was changed so that attempts to receive/send data
always come from the upper layers, instead of them only trying to do so when
the lower layer let them know they could try, we can finally get rid of the
fd cache. We don't really need it anymore, and removing it gives us a small
performance boost.
When forcing the outgoing address of a connection, till now we used to
allocate this outgoing connection and set the address into it, then set
SF_ADDR_SET. With connection reuse this causes a whole lot of issues and
difficulties in the code.
Thanks to the previous changes, it is now possible to store the target
address into the stream instead, and copy the address from the stream to
the connection when initializing the connection. assign_server_address()
does this and as a result SF_ADDR_SET now reflects the presence of the
target address in the stream, not in the connection. The http_proxy mode,
the peers and the master's CLI now use the same mechanism. For now the
existing connection code was not removed to limit the amount of tricky
changes, but the allocated connection is not used anymore.
This change also revealed a latent issue that we've been having around
option http_proxy : the address was set in the connection but neither the
SF_ADDR_SET nor the SF_ASSIGNED flags were set. It looks like the connection
could establish only due to the fact that it existed with a non-null
destination address.
When using a level lower than admin on the master CLI, a \n is output
before the response, this is caused by the response of the "operator" or
"user" that are sent before the actual command.
To fix this problem we introduce the flag APPCTX_CLI_ST1_NOLF which ask
a command response to not be followed by the final \n.
This patch made a special case with the command operator and user
followed by a - so they are not followed by \n.
This patch must be backported to 2.0 and 1.9.
Since commit 829bd471 ("MEDIUM: stream: rearrange the events to remove
the loop"), the pipelining in the master CLI does not work anymore.
Indeed when doing:
echo "@1 show info; @2 show info; @3 show info" | socat /tmp/haproxy.master -
the CLI will only show the response of the first command.
When debugging we can observe that the command is sent, but the client
closes the connection before receiving the response.
The problem is that the flag CF_READ_NULL is not cleared when we
reiniate the flags of the response and we rely on this flag to close.
Must be backported in 2.0
As reported in GH issue #109 and in discourse issue
https://discourse.haproxy.org/t/haproxy-returns-408-or-504-error-when-timeout-client-value-is-every-25d
the time parser doesn't error on overflows nor underflows. This is a
recurring problem which additionally has the bad taste of taking a long
time before hitting the user.
This patch makes parse_time_err() return special error codes for overflows
and underflows, and adds the control in the call places to report suitable
errors depending on the requested unit. In practice, underflows are almost
never returned as the parsing function takes care of rounding values up,
so this might possibly happen on 64-bit overflows returning exactly zero
after rounding though. It is not really possible to cut the patch into
pieces as it changes the function's API, hence all callers.
Tests were run on about every relevant part (cookie maxlife/maxidle,
server inter, stats timeout, timeout*, cli's set timeout command,
tcp-request/response inspect-delay).
Haproxy is designed to be able to continue to run even under very low
memory conditions. However this can sometimes have a serious impact on
performance that it hard to diagnose. Let's report counters of failed
pool and buffer allocations per thread in show activity.
Most of the time we find ourselves adding per-thread fields to observe
activity, so let's compute these on the fly and display them. Now the
output shows "field: total [ thr0 thr1 ... thrn ]".
The unused fd_del and fd_skip were being abused during debugging sessions
as general purpose event counters. With their removal, let's officially
have dedicated counters for such use cases. These counters are called
"ctr0".."ctr2" and are listed at the end when DEBUG_DEV is set.
We still have quite a number of build macros which are mapped 1:1 to a
USE_something setting in the makefile but which have a different name.
This patch cleans this up by renaming them to use the USE_something
one, allowing to clean up the makefile and make it more obvious when
reading the code what build option needs to be added.
The following renames were done :
ENABLE_POLL -> USE_POLL
ENABLE_EPOLL -> USE_EPOLL
ENABLE_KQUEUE -> USE_KQUEUE
ENABLE_EVPORTS -> USE_EVPORTS
TPROXY -> USE_TPROXY
NETFILTER -> USE_NETFILTER
NEED_CRYPT_H -> USE_CRYPT_H
CONFIG_HAP_CRYPT -> USE_LIBCRYPT
CONFIG_HAP_NS -> DUSE_NS
CONFIG_HAP_LINUX_SPLICE -> USE_LINUX_SPLICE
CONFIG_HAP_LINUX_TPROXY -> USE_LINUX_TPROXY
CONFIG_HAP_LINUX_VSYSCALL -> USE_LINUX_VSYSCALL
Both the config and gdb report thread IDs starting at 1, so better do the
same in "show activity" to limit confusion. We also display the full
permitted range.
This could be backported to 1.9 since it was present there.
It's always a pain to have to stuff lots of #ifdef USE_OPENSSL around
ssl headers, it even results in some of them appearing in a random order
and multiple times just to benefit form an existing ifdef block. Let's
make these headers safe for inclusion when USE_OPENSSL is not defined,
they now perform the test themselves and do nothing if USE_OPENSSL is
not defined. This allows to remove no less than 8 such ifdef blocks
and make include blocks more readable.
They were all check to comply with the advertised openssl version. Now
that libressl doesn't pretend to be a more recent openssl anymore, we
can simply rely on the regular openssl version tests without having to
deal with exceptions for libressl.
Most tests on OPENSSL_VERSION_NUMBER have become complex and break all
the time because this number is fake for some derivatives like LibreSSL.
This patch creates a new macro, HA_OPENSSL_VERSION_NUMBER, which will
carry the real openssl version defining the compatibility level, and
this version will be adjusted depending on the variants.
SSL_SESSION_get0_id_context is introduced in LibreSSL-2.7.0
async operations are not supported by LibreSSL
early data is not supported by LibreSSL
packet_length is removed from SSL struct in LibreSSL
It's not logical to report context switch rates per thread in show activity
because everything else is a counter and it's not even possible to compare
values. Let's only report counts. Further, this simplifies the scheduler's
code.
It's particularly useful to spot runaway tasks to see this. The context
switch rate covers all tasklet calls (tasks and I/O handlers) while the
task wakeups only covers tasks picked from the run queue to be executed.
High values there will indicate either an intense traffic or a bug that
mades a task go wild.
Since the introduction of the options field, we can use it to store the
type of process.
type = 'm' is replaced by PROC_O_TYPE_MASTER
type = 'w' is replaced by PROC_O_TYPE_WORKER
type = 'e' is replaced by PROC_O_TYPE_PROG
The old values are still used in the HAPROXY_PROCESSES environment
variable to pass the information during a reload.
Commit a8f57d51a ("MINOR: cli/activity: report the accept queue sizes
in "show activity"") broke the single-threaded build because the
accept-rings are not implemented there. Let's ifdef this out. Ideally
we should start to think about always having such elements initialized
even without threads to improve the test coverage.
Seeing the size of each ring helps understand which threads are
overloaded and why some of them are less often elected than others
by the multi-queue load balancer.
The "show activity" command reports the number of incoming connections
dispatched per thread but doesn't report the number of connections
received by each thread. It is important to be able to monitor this
value as it can show that for whatever reason a smaller set of threads
is receiving the connections and dispatching them to all other ones.
Displays a prefix for every addresses in 'show cli sockets'.
It could be 'unix@', 'ipv4@', 'ipv6@', 'abns@' or 'sockpair@'.
Could be backported in 1.9 and 1.8.
The 'show cli sockets' was not handling the abns sockets. This is a
problem since it uses the AF_UNIX family, it displays nothing
in the path column because the path starts by \0.
Should be backported to 1.9 and 1.8.
It's pointless to always set and maintain l->maxconn because the accept
loop already enforces the frontend's limit anyway. Thus let's stop setting
this value by default and keep it to zero meaning "no limit". This way the
frontend's maxconn will be used by default. Of course if a value is set,
it will be enforced.
In an attempt to try to provide automatic maxconn settings, we need to
decorrelate a listner's backlog and maxconn so that these values can be
independent. This introduces a listener_backlog() function which retrieves
the backlog value from the listener's backlog, the frontend's, the
listener's maxconn, the frontend's or falls back to 1024. This
corresponds to what was done in cfgparse.c to force a value there except
the last fallback which was not set since the frontend's maxconn is always
known.
global.maxsock used to be augmented by the frontend's maxconn value
for each frontend listener, which is absurd when there are many
listeners in a frontend because the frontend's maxconn fixes an
upper limit to how many connections will be accepted on all of its
listeners anyway. What is needed instead is to add one to count the
listening socket.
In addition, the CLI's and peers' value was incremented twice, the
first time when creating the listener and the second time in the
main init code.
Let's now make sure we only increment global.maxsock by the required
amount of sockets. This means not adding maxconn for each listener,
and relying on the global values when they are correct.
It's important to monitor the accept queues to know if some incoming
connections had to be handled by their originating thread due to an
overflow. It's also important to be able to confirm thread fairness.
This patch adds "accq_pushed" to activity reporting, which reports
the number of connections that were successfully pushed into each
thread's queue, and "accq_full", which indicates the number of
connections that couldn't be pushed because the thread's queue was
full.
For some embedded systems, it's pointless to have 32- or even 64- large
arrays of processes when it's known that much fewer processes will be
used in the worst case. Let's introduce this MAX_PROCS define which
contains the highest number of processes allowed to run at once. It
still defaults to LONGBITS but may be lowered.
As long-time changes have accumulated over time, the exported functions
of the stream-interface were almost all prefixed "si_<something>" while
most private ones (mostly callbacks) were called "stream_int_<something>".
There were still a few confusing exceptions, which were addressed to
follow this shcme :
- stream_sock_read0(), only used internally, was renamed stream_int_read0()
and made static
- stream_int_notify() is only private and was made static
- stream_int_{check_timeouts,report_error,retnclose,register_handler,update}
were renamed si_<something>.
Now it is clearer when checking one of these if it risks to be used outside
or not.
We most often store the mux context there but it can also be something
else while setting up the connection. Better call it "ctx" and know
that it's the owner's context than misleadingly call it mux_ctx and
get caught doing suspicious tricks.
It takes ages to proceed with "show fd" when there is sustained activity
because it uses the rendez-vous point for each and every file descriptor
in the loop. It's very common to see socat timeout there.
Instead of doing this, let's just isolate the function when entering the
loop. Its duration is limited by the number of FDs that may be emitted in
a single buffer anyway, so it's much lighter and responds much faster.
If a reload was issued to the master process and failed, it is critical
that the admin sees it because it means that the saved configuration
does not work anymore and might not be usable after a full restart. For
this reason in this case we modify the "master" prompt to explicitly
indicate that a reload failed.
In the master CLI, the commands and the prefix were still parsed and
trimmed after the pattern payload. Don't parse anything but the end of a
line till we are in payload mode.
Put the search of the pattern after the trim so we can use correctly a
payload with a command which is prefixed by @.
Handle the CLI level in the master CLI. In order to do this, the master
CLI stores the level in the stream. Each command are prefixed by a
"user" or "operator" command before they are forwarded to the target
CLI.
The level can be configured in the haproxy program arguments with the
level keyword: -S /tmp/sock,level,admin -S /tmp/sock2,level,user.
Implement "show cli level" which show the level of the current CLI
session.
Implement "operator" and "user" which lower the permissions of the
current CLI session.
Change the output of the relative pid for the old processes, displays
"[was: X]" instead of just "X" which was confusing if you want to
connect to the CLI of an old PID.
The CLI proxy was not handling payload. To do that, we needed to keep a
connection active on a server and to transfer each new line over that
connection until we receive a empty line.
The CLI proxy handles the payload in the same way that the CLI do it.
Examples:
$ echo -e "@1;add map #-1 <<\n$(cat data)\n" | socat /tmp/master-socket -
$ socat /tmp/master-socket readline
prompt
master> @1
25130> add map #-1 <<
+ test test
+ test2 test2
+ test3 test3
+
25130>
During a payload transfer, we need to wait for the data even when we are
not in interactive mode. Indeed, the data could be received line per
line progressively instead of in one recv.
Previously the CLI was doing a SHUTW just after the first line if it was
not in interactive mode. We now check if we are in payload mode to do
a SHUTW.
Should be backported in 1.8.
Rework the CLI proxy parser to look more like the CLI parser, corner
case and escaping are handled the same way.
The parser now splits the commands in words instead of just handling
the prefixes.
It's easier to compare words and arguments of a command this way and to
parse internal command that will be consumed directly by the CLI proxy.
These potential null-deref warnings are emitted on gcc 7 and above
when threads are disabled due to the use of objt_server() after an
existing validity test. Let's switch to __objt_server() since we
know the pointer is valid, it will not confuse the compiler.
Some of these may be backported to 1.8.
This switches explicit calls to various trivial registration methods for
keywords, muxes or protocols from constructors to INITCALL1 at stage
STG_REGISTER. All these calls have in common to consume a single pointer
and return void. Doing this removes 26 constructors. The following calls
were addressed :
- acl_register_keywords
- bind_register_keywords
- cfg_register_keywords
- cli_register_kw
- flt_register_keywords
- http_req_keywords_register
- http_res_keywords_register
- protocol_register
- register_mux_proto
- sample_register_convs
- sample_register_fetches
- srv_register_keywords
- tcp_req_conn_keywords_register
- tcp_req_cont_keywords_register
- tcp_req_sess_keywords_register
- tcp_res_cont_keywords_register
- flt_register_keywords
Fix some memory leak and a FD leak in the error path of the master proxy
initialisation. It's a really minor issue since the process is exiting
when taking those error paths.
Valgrind's memcheck reports memory leaks in cli.c, because
the out parameter of memprintf is not properly freed:
==31035== 11 bytes in 1 blocks are definitely lost in loss record 16 of 101
==31035== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==31035== by 0x4C2FDEF: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==31035== by 0x4A3C72: my_realloc2 (standard.h:1364)
==31035== by 0x4A3C72: memvprintf (standard.c:3459)
==31035== by 0x4A3D93: memprintf (standard.c:3482)
==31035== by 0x4AF77E: mworker_cli_sockpair_new (cli.c:2324)
==31035== by 0x48E826: init (haproxy.c:1749)
==31035== by 0x408BBC: main (haproxy.c:2725)
==31035==
==31035== 11 bytes in 1 blocks are definitely lost in loss record 17 of 101
==31035== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==31035== by 0x4C2FDEF: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==31035== by 0x4A3C72: my_realloc2 (standard.h:1364)
==31035== by 0x4A3C72: memvprintf (standard.c:3459)
==31035== by 0x4A3D93: memprintf (standard.c:3482)
==31035== by 0x4AF071: mworker_cli_proxy_create (cli.c:2172)
==31035== by 0x48EC89: init (haproxy.c:1760)
==31035== by 0x408BBC: main (haproxy.c:2725)
These leaks were introduced in commits
ce83b4a5dd and
8a02257d88
which are specific to haproxy 1.9 dev.
The "cpust_{tot,1s,15s}" fields used to report milliseconds but nothing
in the value's title made this explicit. Let's rename the field to report
"cpust_ms_{tot,1s,15s}" to more easily remind that the unit represents
milliseconds.
Since we know the time it takes to process everything between two poll()
calls, we can use this as the max latency measurement any task will
experience and average it.
This code does this, and reports in "show activity" the average of this
loop time over the last 1024 poll() loops, for each thread. It will vary
quickly at high loads and slowly under low to moderate loads, depending
on the rate at which poll() is called. The latency a task experiences
is expected to be half of this on average.
At the moment the situation with activity measurement is quite tricky
because the struct activity is defined in global.h and declared in
haproxy.c, with operations made in time.h and relying on freq_ctr
which are defined in freq_ctr.h which itself includes time.h. It's
barely possible to touch any of these files without breaking all the
circular dependency.
Let's move all this stuff to activity.{c,h} and be done with it. The
measurement of active and stolen time is now done in a dedicated
function called just after tv_before_poll() instead of mixing the two,
which used to be a lazy (but convenient) decision.
No code was changed, stuff was just moved around.
In the output of 'show fd', the worker CLI's socketpair was still
handled by an "unknown" function. That can be really confusing during
debug. Fixed it by showing "mworker_accept_wrapper" instead.
Remaining calls to si_cant_put() were all for lack of room and were
turned to si_rx_room_blk(). A few places where SI_FL_RXBLK_ROOM was
cleared by hand were converted to si_rx_room_rdy().
The now unused si_cant_put() function was removed.
A number of calls to si_cant_put() were used in fact to request being
called back once a buffer is available. These ones are not needed anymore
since si_alloc_ibuf() already sets the SI_FL_RXBLK_BUFF flag when called
in appctx context. Those called with a foreign stream-int are simply turned
to si_rx_buff_blk().
In master-worker mode, the socketpair CLI listener of the worker is now
marked unstoppable, which allows to connect to the CLI of an old process
which is in a leaving state, allowing to debug it.
It doesn't make sense to limit this code to applets, as any stream
interface can use it. Let's rename it by simply dropping the "applet_"
part of the name. No other change was made except updating the comments.
A bug occurs when the CLI proxy of the master received a command which
is prefixed by some spaces but without a routing prefix (@).
In this case the pcli_parse_request() was returning a wrong number of
data to forward.
The response analyzer was called twice and the prompt displayed twice.
This patch implements analysers for parsing the CLI and extra features
for the master's CLI.
For each command (sent alone, or separated by ; or \n) the request
analyser will determine to which server it should send the request.
The 'mode cli' proxy is able to parse a prefix for each command which is
used to select the apropriate server. The prefix start by @ and is
followed by "master", the PID preceded by ! or the relative PID. (e.g.
@master, @1, @!1234). The servers are not round-robined anymore.
The command is sent with a SHUTW which force the server to close the
connection after sending its response. However the proxy allows a
keepalive connection on the client side and does not close.
The response analyser does not do much stuff, it only reinits the
connection when it received a close from the server, and forward the
response. It does not analyze the response data.
The only guarantee of the end of the response is the close of the
server, we can't rely on the double \n since it's not send by every
command.
This could be reimplemented later as a filter.
Add a struct server pointer in the mworker_proc struct so we can easily
use it as a target for the mworker proxy.
pcli_prefix_to_pid() is used to find the right PID of the worker
when using a prefix in the CLI. (@master, @#<relative pid> , @<pid>)
pcli_pid_to_server() is used to find the right target server for the
CLI proxy.
The master process does not need all the keywords of the cli, add 2
flags to chose which keyword to use.
It might be useful to activate some of them in a debug mode later...
This patch introduces mworker_cli_proxy_new_listener() which allows the
creation of new listeners for the CLI proxy.
Using this function it is possible to create new listeners from the
program arguments with -Sa <unix_socket>. It is allowed to create
multiple listeners with several -Sa.
This patch implements a listen proxy within the master. It uses the
sockpair of all the workers as servers.
In the current state of the code, the proxy is only doing round robin on
the CLI of the workers. A CLI mode will be needed to know to which CLI
send the requests.
The init code of the mworker_proc structs has been moved before the
init of the listeners.
Each socketpair is now connected to a CLI within the workers, which
allows the master to access their CLI.
The inherited flag of the worker side socketpair is removed so the
socket can be closed in the master.
The purpose is to detect if threads or processes are competing for the
same CPU. This can happen when threads are incorrectly bound, or after a
reload if the previous process still has an important activity. With
threads this situation is problematic because a preempted thread holding
a lock will block other ones waiting for this lock to be released.
A first attempt consisted in measuring the cumulated lost time more
precisely but the system's scheduler is smart enough to try to limit the
thread preemption rate by mostly context switching during poll()'s blank
periods, so most of the time lost is not seen. In essence this is good
because it means a thread is not preempted with a lock held, and even
regarding the rendez-vous point it cannot prevent the other ones from
making progress. But still it happens tens to hundreds of times per
second that a thread might be preempted, so it's still possible to detect
that the situation is happening, thus it's interesting to measure and
report its frequency.
Each time we enter the poller, we check the CPU time spent working and
see if we've lost time doing something else. To limit false positives,
we're only interested in losses of 500 microseconds or more (i.e. half
a clock tick on a 1 kHz system). If so, it indicates that some time was
stolen by another thread or process. Note that we purposely store some
sub-millisecond counters so that under heavy traffic with a 1 kHz clock,
it's still possible to measure something without being subject to the
risk of rounding errors (i.e. if exactly 1 ms is stolen it's possible
that the time difference could often be slightly lower).
This counter of lost CPU time slots time is reported in "show activity"
in numbers of milliseconds of CPU lost per second, per 15s, and total
over the process' life. By definition, the per-second counter cannot
report values larger than 1000 per thread per second and the 15s one
will be limited to 15000/s in the worst case, but it's possible that
peak values exceed such thresholds after long pauses.
Theorically nothing would prevent a front applet form connecting to a stats
socket, and if a "getsock" command was issued, it would cause a crash. Right
now nothing in the code does this so in its current form there is no impact.
It may or may not be backported to 1.8.
The "show fd" command was implemented as a debugging aid but it's not
thread safe. Its features have grown, it can now dump some mux-specific
parts and is being used in production to capture some useful debugging
traces. But it will quickly crash the process when used during an H2 load
test for example, especially when haproxy is built with the DEBUG_UAF
option. It cannot afford not to be thread safe anymore. Let's make use
of the new rendez-vous point using thread_isolate() / thread_release()
to ensure that the data being dumped are not changing under us. The dump
becomes slightly slower under load but now it's safe.
This should be backported to 1.8 along with the rendez-vous point code
once considered stable enough.
Add a new pipe, one per thread, so that we can write on it to wake a thread
sleeping in a poller, and use it to wake threads supposed to take care of a
task, if they are all sleeping.
It remained some fragments of the old buffers API in debug messages, here and
there.
This was caused by the recent buffer API changes, no backport is needed.
Now all the code used to manipulate chunks uses a struct buffer instead.
The functions are still called "chunk*", and some of them will progressively
move to the generic buffer handling code as they are cleaned up.
Chunks are only a subset of a buffer (a non-wrapping version with no head
offset). Despite this we still carry a lot of duplicated code between
buffers and chunks. Replacing chunks with buffers would significantly
reduce the maintenance efforts. This first patch renames the chunk's
fields to match the name and types used by struct buffers, with the goal
of isolating the code changes from the declaration changes.
Most of the changes were made with spatch using this coccinelle script :
@rule_d1@
typedef chunk;
struct chunk chunk;
@@
- chunk.str
+ chunk.area
@rule_d2@
typedef chunk;
struct chunk chunk;
@@
- chunk.len
+ chunk.data
@rule_i1@
typedef chunk;
struct chunk *chunk;
@@
- chunk->str
+ chunk->area
@rule_i2@
typedef chunk;
struct chunk *chunk;
@@
- chunk->len
+ chunk->data
Some minor updates to 3 http functions had to be performed to take size_t
ints instead of ints in order to match the unsigned length here.
Now the buffers only contain the header and a pointer to the storage
area which can be anywhere. This will significantly simplify buffer
swapping and will make it possible to map chunks on buffers as well.
The buf_empty variable was removed, as now it's enough to have size==0
and area==NULL to designate the empty buffer (thus a non-allocated head
is the empty buffer by default). buf_wanted for now is indicated by
size==0 and area==(void *)1.
The channels and the checks now embed the buffer's head, and the only
pointer is to the storage area. This slightly increases the unallocated
buffer size (3 extra ints for the empty buffer) but considerably
simplifies dynamic buffer management. It will also later permit to
detach unused checks.
The way the struct buffer is arranged has proven quite efficient on a
number of tests, which makes sense given that size is always accessed
and often first, followed by the othe ones.
There's no real reason to have a specific scheduler for applets anymore, so
nuke it and just use tasks. This comes with some benefits, the first one
being that applets cannot induce high latencies anymore since they share
nice values with other tasks. Later it will be possible to configure the
applets' nice value. The second benefit is that the applet scheduler was
not very thread-friendly, having a big lock around it in prevision of this
change. Thus applet-intensive workloads should now scale much better with
threads.
Some more improvement is possible now : some applets also use a task to
handle timers and timeouts. These ones could now be simplified to use only
one task.
In commit abbf607 ("MEDIUM: cli: Add payload support") some cli keywords
without usage message have been added at the beginning of the keywords
array.
cli_gen_usage_usage_msg() use the kw->usage == NULL to stop generating
the usage message for the current keywords array. With those keywords at
the beginning, the whole array in cli.c was ignored in the usage message
generation.
This patch now checks the keyword itself, allowing a keyword without
usage message anywhere in the array.
In order to use arbitrary data in the CLI (multiple lines or group of words
that must be considered as a whole, for example), it is now possible to add a
payload to the commands. To do so, the first line needs to end with a special
pattern: <<\n. Everything that follows will be left untouched by the CLI parser
and will be passed to the commands parsers.
Per-command support will need to be added to take advantage of this
feature.
Signed-off-by: Aurlien Nephtali <aurelien.nephtali@corp.ovh.com>
Some error paths (especially those followed when running out of memory)
can set the error message to NULL. In order to avoid a crash, use a
generic message ("Out of memory") when this case arises.
It should be backported to 1.8.
Signed-off-by: Aurlien Nephtali <aurelien.nephtali@corp.ovh.com>
This function will be called from the CLI's "show fd" command to append some
extra mux-specific information that only the mux handler can decode. This is
supposed to help collect various hints about what is happening when facing
certain anomalies.
Commit 35b1b48 ("MINOR: cli: make "show fd" report the mux and mux_ctx
pointers when available") introduced an accidental build warning due to
a missing const statement.
This is handy to quickly distinguish H2 connections as well as to easily
access the h2c context. It could be backported to 1.8 to help during
troubleshooting sessions.
This bug was introduced in 48bcfdab2 ("MEDIUM: dumpstat: make the CLI
parser understand the backslash as an escape char").
This should be backported to 1.8.
Signed-off-by: Aurlien Nephtali <aurelien.nephtali@corp.ovh.com>
Since 200b0fac ("MEDIUM: Add support for updating TLS ticket keys via
socket"), 4147b2ef ("MEDIUM: ssl: basic OCSP stapling support."),
4df59e9 ("MINOR: cli: add socket commands and config to prepend
informational messages with severity") and 654694e1 ("MEDIUM: stats/cli:
add support for "set table key" to enter values"), commands
'set ssl tls-key', 'set ssl ocsp-response', 'set severity-output' and
'set table' do not always send an extra LF at the end of their outputs.
This is required as mentioned in doc/management.txt:
"Since multiple commands may be issued at once, haproxy uses the empty
line as a delimiter to mark an end of output for each command"
Signed-off-by: Aurlien Nephtali <aurelien.nephtali@corp.ovh.com>
The correct keyword is 'ssl-sessions' (vs. 'ssl-session').
The typo was introduced in 45c742be05 ('REORG: cli: move the "set
rate-limit" functions to their own parser').
Signed-off-by: Aurlien Nephtali <aurelien.nephtali@corp.ovh.com>
This printf() was added in f886e3478d ("MINOR: cli: Add a command to
send listening sockets.").
Signed-off-by: Aurlien Nephtali <aurelien.nephtali@corp.ovh.com>
This bug is present since 7a4a0ac71d ("MINOR: cli: add a new "show fd"
command").
This should be backported to 1.8.
Signed-off-by: Aurlien Nephtali <aurelien.nephtali@corp.ovh.com>
An fd cache entry might be removed and added at the end of the list, while
another thread is parsing it, if that happens, we may miss fd cache entries,
to avoid that, add a new field in the struct fdtab, "added_mask", which
contains a mask for potentially affected threads, if it is set, the
corresponding thread will set its bit in fd_cache_mask, to avoid waiting in
poll while it may have more work to do.
Create a local, per-thread, fdcache, for file descriptors that only belongs
to one thread, and make the global fd cache mostly lockless, as we can get
a lot of contention on the fd cache lock.
The "show fd" command on the CLI doesn't list the last FD in use since
it doesn't include maxfd. We don't need to use maxfd here anyway as
global.maxsock will do the job pretty well and removes this dependency.
This patch may be backported to 1.8.
Since the fd update tables are per-thread, we need to have a bit per
thread to indicate whether an update exists, otherwise this can lead
to lost update events every time multiple threads want to update the
same FD. In practice *for now*, it only happens at start time when
listeners are enabled and ask for polling after facing their first
EAGAIN. But since the pollers are still shared, a lost event is still
recovered by a neighbor thread. This will not reliably work anymore
with per-thread pollers, where it has been observed a few times on
startup that a single-threaded listener would not always accept
incoming connections upon startup.
It's worth noting that during this code review it appeared that the
"new" flag in the fdtab isn't used anymore.
This fix should be backported to 1.8.
A number of counters have been added at special places helping better
understanding certain bug reports. These counters are maintained per
thread and are shown using "show activity" on the CLI. The "clear
counters" commands also reset these counters. The output is sent as a
single write(), which currently produces up to about 7 kB of data for
64 threads. If more counters are added, it may be necessary to write
into multiple buffers, or to reset the counters.
To backport to 1.8 to help collect more detailed bug reports.
Rename the global variable "proxy" to "proxies_list".
There's been multiple proxies in haproxy for quite some time, and "proxy"
is a potential source of bugs, a number of functions have a "proxy" argument,
and some code used "proxy" when it really meant "px" or "curproxy". It worked
by pure luck, because it usually happened while parsing the config, and thus
"proxy" pointed to the currently parsed proxy, but we should probably not
rely on this.
[wt: some of these are definitely fixes that are worth backporting]
The prefix "auto:" can be added before the process set to let HAProxy
automatically bind a process to a CPU by incrementing process and CPU sets. To
be valid, both sets must have the same size. No matter the declaration order of
the CPU sets, it will be bound from the lower to the higher bound.
Examples:
# all these lines bind the process 1 to the cpu 0, the process 2 to cpu 1
# and so on.
cpu-map auto:1-4 0-3
cpu-map auto:1-4 0-1 2-3
cpu-map auto:1-4 3 2 1 0
# bind each process to exaclty one CPU using all/odd/even keyword
cpu-map auto:all 0-63
cpu-map auto:even 0-31
cpu-map auto:odd 32-63
# invalid cpu-map because process and CPU sets have different sizes.
cpu-map auto:1-4 0 # invalid
cpu-map auto:1 0-3 # invalid
This is useful to know what thread(s) an fd is scheduled to be
handled on. It's worth noting that at the moment the "show fd"d
doesn't seem totally thread-safe.
All the references to connections in the data path from streams and
stream_interfaces were changed to use conn_streams. Most functions named
"something_conn" were renamed to "something_cs" for this. Sometimes the
connection still is what matters (eg during a connection establishment)
and were not always renamed. The change is significant and minimal at the
same time, and was quite thoroughly tested now. As of this patch, all
accesses to the connection from upper layers go through the pass-through
mux.
For HTTP/2 we'll need some buffer-only equivalent functions to some of
the ones applying to channels and still squatting the bi_* / bo_*
namespace. Since these names have kept being misleading for quite some
time now and are really getting annoying, it's time to rename them. This
commit will use "ci/co" as the prefix (for "channel in", "channel out")
instead of "bi/bo". The following ones were renamed :
bi_getblk_nc, bi_getline_nc, bi_putblk, bi_putchr,
bo_getblk, bo_getblk_nc, bo_getline, bo_getline_nc, bo_inject,
bi_putchk, bi_putstr, bo_getchr, bo_skip, bi_swpbuf
I misplaced the "if (!fdt.owner)" test so it can occasionally crash
when dumping an fd that's already been closed but still appears in
the table. It's not critical since this was not pushed into any
release nor backported though.
Since everything is self contained in proto_uxst.c there's no need to
export anything. The same should be done for proto_tcp.c but the file
contains other stuff that's not related to the TCP protocol itself
and which should first be moved somewhere else.
Adds cli commands to change at runtime whether informational messages
are prepended with severity level or not, with support for numeric and
worded severity in line with syslog severity level.
Adds stats socket config keyword severity-output to set default behavior
per socket on startup.
Historically listeners used to have a handler depending on the upper
layer. But now it's exclusively process_stream() and nothing uses it
anymore so it can safely be removed.
Till now connections used to rely exclusively on file descriptors. It
was planned in the past that alternative solutions would be implemented,
leading to member "union t" presenting sock.fd only for now.
With QUIC, the connection will need to continue to exist but will not
rely on a file descriptor but a connection ID.
So this patch introduces a "connection handle" which is either a file
descriptor or a connection ID, to replace the existing "union t". We've
now removed the intermediate "struct sock" which was never used. There
is no functional change at all, though the struct connection was inflated
by 32 bits on 64-bit platforms due to alignment.
Recent commit 7a4a0ac ("MINOR: cli: add a new "show fd" command") introduced
a warning when building at -O2 and above. The compiler doesn't know if a
variable's value might have changed between two if blocks so warns that some
values might be used uninitialized, which is not the case. Let's simply
initialize them to shut the warning.
This one dumps the fdtab for all active FDs with some quickly interpretable
characters to read the flags (like upper case=set, lower case=unset). It
can probably be improved to report fdupdt[] and/or fdinfo[] but at least it
provides a good start and allows to see how FDs are seen. When the fd owner
is a connection, its flags are also reported as it can help compare with the
polling status, and the target (fe/px/sv) as well. When it's a listener, the
listener's state is reported as well as the frontend it belongs to.
This patch changes the stats socket rights for allowing the sending of
listening sockets.
The previous behavior was to allow any unix stats socket with admin
level to send sockets. It's not possible anymore, you have to set this
option to activate the socket sending.
Example:
stats socket /var/run/haproxy4.sock mode 666 expose-fd listeners level user process 4
The current level variable use only 2 bits for storing the 3 access
level (user, oper and admin).
This patch add a bitmask which allows to use the remaining bits for
other usage.
When running with multiple process, if some proxies are just assigned
to some processes, the other processes will just close the file descriptors
for the listening sockets. However, we may still have to provide those
sockets when reloading, so instead we just try hard to pretend those proxies
are dead, while keeping the sockets opened.
A new global option, no-reused-socket", has been added, to restore the old
behavior of closing the sockets not bound to this process.
Add a new command that will send all the listening sockets, via the
stats socket, and their properties.
This is a first step to workaround the linux problem when reloading
haproxy.
Now we exclusively use xprt_get(XPRT_RAW) instead of &raw_sock or
xprt_get(XPRT_SSL) for &ssl_sock. This removes a bunch of #ifdef and
include spread over a number of location including backend, cfgparse,
checks, cli, hlua, log, server and session.
Historically, all listeners have a pointer to the frontend. But since
the introduction of SSL, we now have an intermediary layer called
bind_conf corresponding to a "bind" line. It makes no sense to have
the frontend on each listener given that it's the same for all
listeners belonging to a same bind_conf. Also certain parts like
SSL can only operate on bind_conf and need the frontend.
This patch fixes this by moving the frontend pointer from the listener
to the bind_conf. The extra indirection is quite cheap given and the
places were this is used are very scarce.
A mistake was made when the socket layer was cut into proto and
transport, the transport was attached to the listener while all
listeners in a single "bind" line always have exactly the same
transport. It doesn't seem obvious but this is the reason why there
are so many #ifdefs USE_OPENSSL in cfgparse : a lot of operations
have to be open-coded because cfgparse only manipulates bind_conf
and we don't have the information of the transport layer here.
Very little code makes use of the transport layer, mainly session
setup and log. These places can afford an extra pointer indirection
(the listener points to the bind_conf). This change is thus very small,
it saves a little bit of memory (8B per listener) and makes the code
more flexible.
Most of the keywords don't need to have their own entry in the appctx
union, they just need to reuse some generic pointers like we've been
used to do in the appctx with st{0,1,2}. This patch adds p0, p1, i0, i1
and initializes them to zero before calling the parser. This way some
of the simplest existing keywords will be able to disappear from the
union.
It's worth noting that this is an extension to what was initially
attempted via the "private" member that I removed a few patches ago by
not understanding how it was supposed to be used. Here the fact that
we share the same union will force us to be stricter: the code either
uses the general purpose variables or it uses its own fields but not
both.
This is a leftover from the cleanup campaign, the stats scope was still
initialized by the CLI instead of being initialized by the stats keyword
parsers. This should probably be backported to 1.7 to make the code more
consistent.
Sometimes a registered keyword will not need any specific parsing nor
initialization, so it's annoying to have to write an empty parsing
function returning zero just for this.
This patch makes it possible to automatically call a keyword's I/O
handler of when the parsing function is not defined, while still allowing
a parser to set the I/O handler itself.
Another small bug in "show cli sockets" made the last fix always report
process 64 due to a signedness issue in the shift operation when building
the mask.
When an entity tries to get a buffer, if it cannot be allocted, for example
because the number of buffers which may be allocated per process is limited,
this entity is added in a list (called <buffer_wq>) and wait for an available
buffer.
Historically, the <buffer_wq> list was logically attached to streams because it
were the only entities likely to be added in it. Now, applets can also be
waiting for a free buffer. And with filters, we could imagine to have more other
entities waiting for a buffer. So it make sense to have a generic list.
Anyway, with the current design there is a bug. When an applet failed to get a
buffer, it will wait. But we add the stream attached to the applet in
<buffer_wq>, instead of the applet itself. So when a buffer is available, we
wake up the stream and not the waiting applet. So, it is possible to have
waiting applets and never awakened.
So, now, <buffer_wq> is independant from streams. And we really add the waiting
entity in <buffer_wq>. To be generic, the entity is responsible to define the
callback used to awaken it.
In addition, applets will still request an input buffer when they become
active. But they will not be sleeped anymore if no buffer are available. So this
is the responsibility to the applet I/O handler to check if this buffer is
allocated or not. This way, an applet can decide if this buffer is required or
not and can do additional processing if not.
[wt: backport to 1.7 and 1.6]
