These functions don't close the connection but only perform shutdown for
reads and writes at the mux level. It is a bit ambiguous. Thus,
cs_conn_close() is renamed cs_conn_shut() and cs_conn_drain_and_close() is
renamed cs_conn_drain_and_shut(). These both functions rely on
cs_conn_shutw() and cs_conn_shutr().
Starting from OpenSSLv3, providers are at the core of cryptography
functions. Depending on the provider used, the way the SSL
functionalities work could change. This new 'show ssl providers' CLI
command allows to show what providers were loaded by the SSL library.
This is required because the provider configuration is exclusively done
in the OpenSSL configuration file (/usr/local/ssl/openssl.cnf for
instance).
A new line is also added to the 'haproxy -vv' output containing the same
information.
Complete qc_send function. After having processed each qcs emission, it
will now retry send on qcs where transfer can continue. This is useful
when qc_stream_desc buffer is full and there is still data present in
qcs buf.
To implement this, each eligible qcs is inserted in a new list
<qcc.send_retry_list>. This is done on send notification from the
transport layer through qcc_streams_sent_done(). Retry emission until
send_retry_list is empty or the transport layer cannot proceed more
data.
Several send operations are now called on two different places. Thus a
new _qc_send_qcs() function is defined to factorize the code.
This change should maximize the throughput during QUIC transfers.
MUX streams can now allocate multiple buffers for sending. quic-conn is
responsible to limit the total count of allowed allocated buffers. A
counter is stored in the new field <stream_buf_count>.
For the moment, the value is hardcoded to 30.
On stream buffer allocation failure, the qcc MUX is flagged with
QC_CF_CONN_FULL. The MUX is then woken up as soon as a buffer is freed,
most notably on ACK reception.
Acknowledge of STREAM has been complexified with the introduction of
stream multi buffers. Two functions are executing roughly the same set
of instructions in xprt_quic.c.
To simplify this, move the code complexity in a new function
qc_stream_desc_ack(). It will handle offset calculation, removal of
data, freeing oldest buffer and freeing stream instance if required.
The qc_stream_desc API is cleaner as qc_stream_desc_free_buf() ambiguous
function has been removed.
Complete the qc_stream_desc type to support multiple buffers on
emission. The main objective is to increase the transfer throughput.
The MUX is now able to transfer more data without having to wait ACKs.
To implement this feature, a new type qc_stream_buf is declared. it
encapsulates a buffer with a list element. New functions are defined to
retrieve the current buffer, release it or allocate a new one. Each
buffer is kept in the qc_stream_desc list until all of its data is
acknowledged.
On the MUX side, a qcs uses the current stream buffer to transfer data.
Once the buffer is full, it is released and a new one will be allocated
on a future qc_send() invocation.
Add a new member <qc> in qc_stream_desc structure. This change is
possible since previous patch which add quic-conn argument to
qc_stream_desc_new().
The purpose of this change is to simplify the future evolution of
qc-stream-desc API. This will avoid to repeat qc as argument in various
functions which already used a qc_stream_desc.
Simplify the model qcs/qc_stream_desc. Each types has now its own tree
node, stored respectively in qcc and quic-conn trees. It is still
necessary to mark the stream as detached by the MUX once all data is
transfered to the lower layer.
This might improve slightly the performance on ACK management as now
only the lookup in quic-conn is necessary. On the other hand, memory
size of qcs structure is increased.
Regroup all type definitions and functions related to qc_stream_desc in
the source file src/quic_stream.c.
qc_stream_desc complexity will be increased with the development of Tx
multi-buffers. Having a dedicated module is useful to mix it with
pure transport/quic-conn code.
DHE ciphers do not present a security risk if the key is big enough but
they are slow and mostly obsoleted by ECDHE. This patch removes any
default DH parameters. This will effectively disable all DHE ciphers
unless a global ssl-dh-param-file is defined, or
tune.ssl.default-dh-param is set, or a frontend has DH parameters
included in its PEM certificate. In this latter case, only the frontends
that have DH parameters will have DHE ciphers enabled.
Adding explicitely a DHE ciphers in a "bind" line will not be enough to
actually enable DHE. We would still need to know which DH parameters to
use so one of the three conditions described above must be met.
This request was described in GitHub issue #1604.
MacOS can feed fc_rtt, fc_rttvar, fc_sacked, fc_lost and fc_retrans
so let's expose them on this platform.
Note that at the tcp(7) level, the API is slightly different, as
struct tcp_info is called tcp_connection_info and TCP_INFO is
called TCP_CONNECTION_INFO, so for convenience these ones were
defined to point to their equivalent. However there is a small
difference now in that tcpi_rtt is called tcpi_rttcur on this
platform, which forces us to make a special case for it before
other platforms.
The two recent patches b12966af1 ("BUILD: debug: mark the
__start_mem_stats/__stop_mem_stats symbols as weak") and 2a06e248f
("BUILD: initcall: mark the __start_i_* symbols as weak, not global")
aimed at fixing a build warning and resulted in a build breakage on
MacOS which doesn't have a ".weak" asm statement.
We've already had MacOS-specific asm() statements for section names, so
this patch continues on this trend by moving HA_GLOBL() to compiler.h
and using ".globl" on MacOS since apparently nobody complains there.
It is debatable whether to expose this only when !USE_OBSOLETE_LINKER
or all the time, but since these are just macroes it's no big deal to
let them be available when needed and let the caller decide on the
build conditions.
If any of the patches above is backported, this one will need to as
well.
Ilya reported in issue #1638 that Clang 14 has invented a new warning
that encourages to modify the code in a way that is not always
equivalent, by turning "|" to "||" between some logical operators,
except that the first one guarantees that all members of the expression
will always be evaluated while the latter will stop at the first one
which is true!
This warning triggers in thread_has_tasks(), which is not sensitive to
such change of behavior but which is built this way because it results
in branchless code for something that most often evaluates to false for
all terms. As such it was out of question to turn this to less efficient
compare-and-jump that needlessly pollute the branch predictor, so the
workaround consists in casting each expression to (int). It was verified
that the code is the same.
Yet another example of how-to-introduce-bugs-by-fixing-valid-code
through warnings invented around a beer without thinking longer!
This may need to be backported to a few older branches in case this
compiler lands in recent distros or if gcc finds it wise to imitate it.
Just like for previous fix, these symbols are marked ".globl" during
their declaration, but their later mention uses __attribute__((weak)),
so it's better to only use ".weak" during the declaration so that the
symbol's class does not change.
No need to backport this unless someone reports build issues.
Building with clang and DEBUG_MEM_STATS shows the following warnings:
warning: __start_mem_stats changed binding to STB_WEAK [-Wsource-mgr]
warning: __stop_mem_stats changed binding to STB_WEAK [-Wsource-mgr]
The reason is that the symbols are declared using ".globl" while they
are also referenced as __attribute__((weak)) elsewhere. It turns out
that a weak symbol is implicitly a global one and that the two classes
are exclusive, thus it may confuse the linker. Better fix this.
This may be backported where the patch applies.
cs_conn_io_cb(), cs_conn_sync_recv() and cs_conn_sync_send() are moved in
conn_stream.c. Associated functions are moved too (cs_notify, cs_conn_read0,
cs_conn_recv, cs_conn_send and cs_conn_process).
Remaining flags and associated functions are move in the conn-stream
scope. These flags are added on the endpoint and not the conn-stream
itself. This way it will be possible to get them from the mux or the
applet. The functions to get or set these flags are renamed accordingly with
the "cs_" prefix and updated to manipualte a conn-stream instead of a
stream-interface.
si_conn_cb variable is renamed cs_data_conn_cb. In addtion, its associated
functions are also renamed. si_cs_recv(), si_cs_send() and si_cs_process() are
renamed cs_conn_recv(), cs_conn_send and cs_conn_process(). These functions are
updated to manipulate conn-streams instead of stream-interfaces.
data callbacks were only used for streams attached to a connection and
for health-checks. However there is a callback used by task_run_applet. So,
si_applet_wake_cb() is first renamed to cs_applet_process() and it is
defined as the data callback for streams attached to an applet. This way,
this part now manipulates a conn-stream instead of a stream-interface. In
addition, applets are no longer handled as an exception for this part.
si_update_both() is renamed stream_update_both_cs() and moved in stream.c.
The function is slightly changed to manipulate the stream instead the front
and back conn-streams.
si_update_rx(), si_update_tx() and si_update() are renamed cs_update_rx(),
cs_upate_tx() and cs_update() and updated to manipulate a conn-stream
instead of a stream-interface.
It is a transient commit. It should ease next changes about the conn-stream
refactoring. At the end these functions will be moved in the conn-stream
scope.
si_register_applet() and si_applet_release() are renamed
cs_register_applet() and cs_applet_release() and now manipulate a
conn-stream instead of a stream-inteface.
si_shutr(), si_shutw(), si_chk_rcv() and si_chk_snd() are moved in the
conn-stream scope and renamed, respectively, cs_shutr(), cs_shutw(),
cs_chk_rcv(), cs_chk_snd() and manipulate a conn-stream instead of a
stream-interface.
Some conn-stream functions are only used when there is a connection. Thus,
they was renamed with "cs_conn_" prefix. In addition, we expect to have a
connection, so a BUG_ON is added to be sure the functions are never called
in another context.
wait_event structure is moved in the conn-stream. The tasklet is only
created if the conn-stream is attached to a mux and released when the mux is
detached. This implies a subtle change. In stream_int_chk_rcv() function,
the wakeup of the tasklet was removed because there is no longer tasklet at
this stage (stream_int_chk_rcv() is a callback function of si_embedded_ops).
To be able to move wait_event from the stream-interface to the conn-stream,
we must be prepare to handle errors when a mux is attached to a conn-stream.
Indeed, the wait_event's tasklet will be allocated when both a mux and a
stream will be both attached to a stream. So, we must be prepared to handle
allocation errors.
These flags only concerns the connection part. In addition, it is required
for a next commit, to avoid circular deps. Thus CS_SHR_* and CS_SHW_* were
renamed with the "CO_" prefix.
si_connect() is moved in backend.c and renamed as do_connect_server(). In
addition, the function now manipulate a stream instead of a
stream-interface.
