Some listeners are kept in LI_ASSIGNED state but are not supposed to be
started since they were bypassed on initial startup (eg: in protocol_bind_all()
or in enable_listener()...)
Introduce the LI_F_FINALIZED flag: when the variable is non
zero it means that the listener made it past the LI_LISTEN state (finalized)
at least once so we can safely pause / resume. This way we won't risk starting
a previously bypassed listener which never made it that far and thus was not
expected to be lazy-started by accident.
As listener_pause() and listener_resume() are currently partially broken, such
unexpected lazy-start won't happen. But we're trying to restore pause() and
resume() behavior so this patch will be required before going any further.
We had to re-introduce listeners 'flags' struct member since it was recently
moved into bind_conf struct. But here we do have a legitimate need for these
listener-only flags.
This should only be backported if explicitly required by another commit.
--
Backport notes:
-> 2.4 and 2.5:
The 2-bytes hole we're using in the current patch does not apply, let's
use the 4-byte hole located under the 'option' field.
Replace this:
|@@ -226,7 +226,8 @@ struct li_per_thread {
| struct listener {
| enum obj_type obj_type; /* object type = OBJ_TYPE_LISTENER */
| enum li_state state; /* state: NEW, INIT, ASSIGNED, LISTEN, READY, FULL */
|- /* 2-byte hole here */
|+ uint16_t flags; /* listener flags: LI_F_* */
| int luid; /* listener universally unique ID, used for SNMP */
| int nbconn; /* current number of connections on this listener */
| unsigned int thr_idx; /* thread indexes for queue distribution : (t2<<16)+t1 */
By this:
|@@ -209,6 +209,8 @@ struct listener {
| short int nice; /* nice value to assign to the instantiated tasks */
| int luid; /* listener universally unique ID, used for SNMP */
| int options; /* socket options : LI_O_* */
|+ uint16_t flags; /* listener flags: LI_F_* */
|+ /* 2-bytes hole here */
| __decl_thread(HA_RWLOCK_T lock);
|
| struct fe_counters *counters; /* statistics counters */
-> 2.4 only:
We need to adjust some contextual lines.
Replace this:
|@@ -477,7 +478,7 @@ int pause_listener(struct listener *l, int lpx, int lli)
| if (!lli)
| HA_RWLOCK_WRLOCK(LISTENER_LOCK, &l->lock);
|
|- if (l->state <= LI_PAUSED)
|+ if (!(l->flags & LI_F_FINALIZED) || l->state <= LI_PAUSED)
| goto end;
|
| if (l->rx.proto->suspend)
By this:
|@@ -477,7 +478,7 @@ int pause_listener(struct listener *l, int lpx, int lli)
| !(proc_mask(l->rx.settings->bind_proc) & pid_bit))
| goto end;
|
|- if (l->state <= LI_PAUSED)
|+ if (!(l->flags & LI_F_FINALIZED) || l->state <= LI_PAUSED)
| goto end;
|
| if (l->rx.proto->suspend)
And this:
|@@ -535,7 +536,7 @@ int resume_listener(struct listener *l, int lpx, int lli)
| if (MT_LIST_INLIST(&l->wait_queue))
| goto end;
|
|- if (l->state == LI_READY)
|+ if (!(l->flags & LI_F_FINALIZED) || l->state == LI_READY)
| goto end;
|
| if (l->rx.proto->resume)
By this:
|@@ -535,7 +536,7 @@ int resume_listener(struct listener *l, int lpx, int lli)
| !(proc_mask(l->rx.settings->bind_proc) & pid_bit))
| goto end;
|
|- if (l->state == LI_READY)
|+ if (!(l->flags & LI_F_FINALIZED) || l->state == LI_READY)
| goto end;
|
| if (l->rx.proto->resume)
-> 2.6 and 2.7 only:
struct listener 'flags' member still exists, let's use it.
Remove this from the current patch:
|@@ -226,7 +226,8 @@ struct li_per_thread {
| struct listener {
| enum obj_type obj_type; /* object type = OBJ_TYPE_LISTENER */
| enum li_state state; /* state: NEW, INIT, ASSIGNED, LISTEN, READY, FULL */
|- /* 2-byte hole here */
|+ uint16_t flags; /* listener flags: LI_F_* */
| int luid; /* listener universally unique ID, used for SNMP */
| int nbconn; /* current number of connections on this listener */
| unsigned int thr_idx; /* thread indexes for queue distribution : (t2<<16)+t1 */
Then, replace this:
|@@ -251,6 +250,9 @@ struct listener {
| EXTRA_COUNTERS(extra_counters);
| };
|
|+/* listener flags (16 bits) */
|+#define LI_F_FINALIZED 0x0001 /* listener made it to the READY||LIMITED||FULL state at least once, may be suspended/resumed safely */
|+
| /* Descriptor for a "bind" keyword. The ->parse() function returns 0 in case of
| * success, or a combination of ERR_* flags if an error is encountered. The
| * function pointer can be NULL if not implemented. The function also has an
By this:
|@@ -221,6 +221,7 @@ struct li_per_thread {
| };
|
| #define LI_F_QUIC_LISTENER 0x00000001 /* listener uses proto quic */
|+#define LI_F_FINALIZED 0x00000002 /* listener made it to the READY||LIMITED||FULL state at least once, may be suspended/resumed safely */
|
| /* The listener will be directly referenced by the fdtab[] which holds its
| * socket. The listener provides the protocol-specific accept() function to
There is a need for a small difference between resuming and relaxing
a listener.
When resuming, we expect that the listener may completely resume, this includes
unpausing or rebinding if required.
Resuming a listener is a best-effort operation: no matter the current state,
try our best to bring the listener up to the LI_READY state.
There are some cases where we only want to "relax" listeners that were
previously restricted using limit_listener() or listener_full() functions.
Here we don't want to ressucitate listeners, we're simply interested in
cancelling out the previous restriction.
To this day, listener_resume() on a unbound listener is broken, that's why
the need for this wasn't felt yet.
But we're trying to restore historical listener_resume() behavior, so we better
prepare for this by introducing an explicit relax_listener() function that
only does what is expected in such cases.
This commit depends on:
- "MINOR: listener/api: add lli hint to listener functions"
Add listener lock hint (AKA lli) to (stop/resume/pause)_listener() functions.
All these functions implicitely take the listener lock when they are called:
It could be useful to be able to call them while already holding the lock, so
we're adding lli hint to make them take the lock only when it is missing.
This should only be backported if explicitly required by another commit
--
-> 2.4 and 2.5 common backport notes:
These 2 commits need to be backported first:
- 187396e34 "CLEANUP: listener: function comment typo in stop_listener()"
- a57786e87 "BUG/MINOR: listener: null pointer dereference suspected by
coverity"
-> 2.4 special backport notes:
In addition to the previously mentionned dependencies, the patch needs to be
slightly adapted to match the corresponding contextual lines:
Replace this:
|@@ -471,7 +474,8 @@ int pause_listener(struct listener *l, int lpx)
| if (!lpx && px)
| HA_RWLOCK_WRLOCK(PROXY_LOCK, &px->lock);
|
|- HA_RWLOCK_WRLOCK(LISTENER_LOCK, &l->lock);
|+ if (!lli)
|+ HA_RWLOCK_WRLOCK(LISTENER_LOCK, &l->lock);
|
| if (l->state <= LI_PAUSED)
| goto end;
By this:
|@@ -471,7 +474,8 @@ int pause_listener(struct listener *l, int lpx)
| if (!lpx && px)
| HA_RWLOCK_WRLOCK(PROXY_LOCK, &px->lock);
|
|- HA_RWLOCK_WRLOCK(LISTENER_LOCK, &l->lock);
|+ if (!lli)
|+ HA_RWLOCK_WRLOCK(LISTENER_LOCK, &l->lock);
|
| if ((global.mode & (MODE_DAEMON | MODE_MWORKER)) &&
| !(proc_mask(l->rx.settings->bind_proc) & pid_bit))
Replace this:
|@@ -169,7 +169,7 @@ void protocol_stop_now(void)
| HA_SPIN_LOCK(PROTO_LOCK, &proto_lock);
| list_for_each_entry(proto, &protocols, list) {
| list_for_each_entry_safe(listener, lback, &proto->receivers, rx.proto_list)
|- stop_listener(listener, 0, 1);
|+ stop_listener(listener, 0, 1, 0);
| }
| HA_SPIN_UNLOCK(PROTO_LOCK, &proto_lock);
| }
By this:
|@@ -169,7 +169,7 @@ void protocol_stop_now(void)
| HA_SPIN_LOCK(PROTO_LOCK, &proto_lock);
| list_for_each_entry(proto, &protocols, list) {
| list_for_each_entry_safe(listener, lback, &proto->receivers, rx.proto_list)
| if (!listener->bind_conf->frontend->grace)
|- stop_listener(listener, 0, 1);
|+ stop_listener(listener, 0, 1, 0);
| }
| HA_SPIN_UNLOCK(PROTO_LOCK, &proto_lock);
Replace this:
|@@ -2315,7 +2315,7 @@ void stop_proxy(struct proxy *p)
| HA_RWLOCK_WRLOCK(PROXY_LOCK, &p->lock);
|
| list_for_each_entry(l, &p->conf.listeners, by_fe)
|- stop_listener(l, 1, 0);
|+ stop_listener(l, 1, 0, 0);
|
| if (!(p->flags & (PR_FL_DISABLED|PR_FL_STOPPED)) && !p->li_ready) {
| /* might be just a backend */
By this:
|@@ -2315,7 +2315,7 @@ void stop_proxy(struct proxy *p)
| HA_RWLOCK_WRLOCK(PROXY_LOCK, &p->lock);
|
| list_for_each_entry(l, &p->conf.listeners, by_fe)
|- stop_listener(l, 1, 0);
|+ stop_listener(l, 1, 0, 0);
|
| if (!p->disabled && !p->li_ready) {
| /* might be just a backend */
The half-closed timeout is now directly retrieved from the proxy
settings. There is no longer usage for the .hcto field in the stconn
structure. So let's remove it.
We now directly use the proxy settings to set the half-close timeout of a
stream-connector. The function sc_set_hcto() must be used to do so. This
timeout is only set when a shutw is performed. So it is not really a big
deal to use a dedicated function to do so.
We stop to use the channel's expiration dates to detect read and write
timeouts on the channels. We now rely on the stream-endpoint descriptor to
do so. All the stuff is handled in process_stream().
The stream relies on 2 helper functions to know if the receives or sends may
expire: sc_rcv_may_expire() and sc_snd_may_expire().
An endpoint should now set SE_FL_EXP_NO_DATA flag if it does not expect any
data from the opposite endpoint. This way, the stream will be able to
disable any read timeout on the opposite endpoint. Applets should use
applet_expect_no_data() and applet_expect_data() functions to set or clear
the flag. For now, only dns and sink forwarder applets are concerned.
The stream endpoint descriptor now owns two date, lra (last read activity) and
fsb (first send blocked).
The first one is updated every time a read activity is reported, including data
received from the endpoint, successful connect, end of input and shutdown for
reads. A read activity is also reported when receives are unblocked. It will be
used to detect read timeouts.
The other one is updated when no data can be sent to the endpoint and reset
when some data are sent. It is the date of the first send blocked by the
endpoint. It will be used to detect write timeouts.
Helper functions are added to report read/send activity and to retrieve lra/fsb
date.
Read and write timeouts (.rto and .wto) are now replaced by an unique
timeout, call .ioto. Since the recent refactoring on channel's timeouts,
both use the same value, the client timeout on client side and the server
timeout on the server side. Thus, this part may be simplified. Now it
represents the I/O timeout.
These timers are related to the I/O. Thus it is logical to move them into
the SE descriptor. The patch is a bit huge but it is just a
replacement. However it is error-prone.
From the stconn or the stream, helper functions are used to get, set or
reset these timers. This simplify the timers manipulations.
Read and write timeouts concerns the I/O. Thus, it is logical to move it into
the stconn. At the end, the stream is responsible to detect the timeouts. So
it is logcial to have these values in the stconn and not in the SE
descriptor. But it may change depending on the recfactoring.
So, now:
* scf->rto is used instead of req->rto
* scf->wto is used instead of res->wto
* scb->rto is used instead of res->rto
* scb->wto is used instead of req->wto
This patch removes CF_READ_ERROR and CF_WRITE_ERROR flags. We now rely on
SE_FL_ERR_PENDING and SE_FL_ERROR flags. SE_FL_ERR_PENDING is used for write
errors and SE_FL_ERROR for read or unrecoverable errors.
When a connection error is reported, SE_FL_ERROR and SE_FL_EOS are now set and a
read event and a write event are reported to be sure the stream will properly
process the error. At the stream-connector level, it is similar. When an error
is reported during a send, a write event is triggered. On the read side, nothing
more is performed because an error at this stage is enough to wake the stream
up.
A major change is brought with this patch. We stop to check flags of the
ooposite channel to report abort or timeout. It also means when an read or
write error is reported on a side, we no longer update the other side. Thus
a read error on the server side does no long lead to a write error on the
client side. This should ease errors report.
This flag was introduced in 1.3 to fix a design issue. It was untouch since
then but there is no reason to still have this trick. Note it could be good
to review what happens in HTTP with the server is waiting for the end of the
request. It could be good to be sure a client timeout is always reported.
In bb581423b ("BUG/MEDIUM: httpclient/lua: crash when the lua task timeout
before the httpclient"), a new logic was implemented to make sure that
when a lua ctx destroyed, related httpclients are correctly destroyed too
to prevent a such httpclients from being resuscitated on a destroyed lua ctx.
This was implemented by adding a list of httpclients within the lua ctx,
and a new function, hlua_httpclient_destroy_all(), that is called under
hlua_ctx_destroy() and runs through the httpclients list in the lua context
to properly terminate them.
This was done with the assumption that no concurrent Lua garbage collection
cycles could occur on the same ressources, which seems OK since the "lua"
context is about to be freed and is not explicitly being used by other threads.
But when 'lua-load' is used, the main lua stack is shared between multiple
OS threads, which means that all lua ctx in the process are linked to the
same parent stack.
Yet it seems that lua GC, which can be triggered automatically under
lua_resume() or manually through lua_gc(), does not limit itself to the
"coroutine" stack (the stack referenced in lua->T) when performing the cleanup,
but is able to perform some cleanup on the main stack plus coroutines stacks
that were created under the same main stack (via lua_newthread()) as well.
This can be explained by the fact that lua_newthread() coroutines are not meant
to be thread-safe by design.
Source: http://lua-users.org/lists/lua-l/2011-07/msg00072.html (lua co-author)
It did not cause other issues so far because most of the time when using
'lua-load', the global lua lock is taken when performing critical operations
that are known to interfere with the main stack.
But here in hlua_httpclient_destroy_all(), we don't run under the global lock.
Now that we properly understand the issue, the fix is pretty trivial:
We could simply guard the hlua_httpclient_destroy_all() under the global
lua lock, this would work but it could increase the contention over the
global lock.
Instead, we switched 'lua->hc_list' which was introduced with bb581423b
from simple list to mt_list so that concurrent accesses between
hlua_httpclient_destroy_all and hlua_httpclient_gc() are properly handled.
The issue was reported by @Mark11122 on Github #2037.
This must be backported with bb581423b ("BUG/MEDIUM: httpclient/lua: crash
when the lua task timeout before the httpclient") as far as 2.5.
Pretty often we have to emit a value (setting, limit etc) in an error
message, and this value is known at compile-time, and just doing this
forces to use a printf format such as "%d". Let's have a simple macro
to turn any other macro or value into a string that can be concatenated
with the rest of the string around. This simplifies error messages
production on the CLI for example.
Since commit cc9bf2e5f "MEDIUM: cache: Change caching conditions"
responses that do not have an explicit expiration time are not cached
anymore. But this mechanism wrongly used the TX_CACHE_IGNORE flag
instead of the TX_CACHEABLE one. The effect this had is that a cacheable
response that corresponded to a request having a "Cache-Control:
no-cache" for instance would not be cached.
Contrary to what was said in the other commit message, the "checkcache"
option should not be impacted by the use of the TX_CACHEABLE flag
instead of the TX_CACHE_IGNORE one. The response is indeed considered as
not cacheable if it has no expiration time, regardless of the presence
of a cookie in the response.
This should fix GitHub issue #2048.
This patch can be backported up to branch 2.4.
Implement a way to test if some options are enabled at run-time. For now,
following options may be detected:
POLL, EPOLL, KQUEUE, EVPORTS, SPLICE, GETADDRINFO, REUSEPORT,
FAST-FORWARD, SERVER-SSL-VERIFY-NONE
These options are those that can be disabled on the command line. This way
it is possible, from a reg-test for instance, to know if a feature is
supported or not :
feature cmd "$HAPROXY_PROGRAM -cc '!(globa.tune & GTUNE_NO_FAST_FWD)'"
The option was renamed to only permit to disable the fast-forward. First
there is no reason to enable it because it is the default behavior. Then it
introduced a bug because there is no way to be sure the command line has
precedence over the configuration this way. So, the option is now named
"tune.disable-fast-forward" and does not support any argument. And of
course, the commande line option "-dF" has now precedence over the
configuration.
No backport needed.
With previous commit, quic-conn are now handled as jobs to prevent the
termination of haproxy process. This ensures that QUIC connections are
closed when all data are acknowledged by the client and there is no more
active streams.
The quic-conn layer emits a CONNECTION_CLOSE once the MUX has been
released and all streams are acknowledged. Then, the timer is scheduled
to definitely free the connection after the idle timeout period. This
allows to treat late-arriving packets.
Adjust this procedure to deactivate this timer when process stopping is
in progress. In this case, quic-conn timer is set to expire immediately
to free the quic-conn instance as soon as possible. This allows to
quickly close haproxy process.
This should be backported up to 2.7.
Implement client-fin timeout for MUX quic. This timeout is used once an
applicative layer shutdown has been called. In HTTP/3, this corresponds
to the emission of a GOAWAY.
This should be backported up to 2.7.
Factorize shutdown operation in a dedicated function qc_shutdown(). This
will allow to call it from multiple places. A new flag QC_CF_APP_SHUT is
also defined to ensure it will only be executed once even if called
multiple times per connection.
This commit will be useful to properly support haproxy soft stop.
This should be backported up to 2.7.
The send*() syscall which are responsible of such ICMP packets reception
fails with ECONNREFUSED as errno.
man(7) udp
ECONNREFUSED
No receiver was associated with the destination address.
This might be caused by a previous packet sent over the socket.
We must kill asap the underlying connection.
Must be backported to 2.7.
This code was there because the timer task was not running on the same thread
as the one which parse the QUIC packets. Now that this is no more the case,
we can wake up this task directly.
Must be backported to 2.7.
Move quic_rx_pkts_del() out of quic_conn.h to make it benefit from the TRACE API.
Add traces which already already helped in diagnosing an issue encountered with
ngtcp2 which sent too much 1RTT packets before the handshake completion. This
has been fixed here after having discussed with Tasuhiro on QUIC dev slack:
https://github.com/ngtcp2/ngtcp2/pull/663
Must be backported to 2.7.
Add traces inside h3_decode_qcs(). Every error path has now its
dedicated trace which should simplify debugging. Each early returns has
been converted to a goto invocation.
To complete the demux tracing, demux frame type and length are now
printed using the h3s instance whenever its possible on trace
invocation. A new internal value H3_FT_UNINIT is used as a frame type to
mark demuxing as inactive.
This should be backported up to 2.7.
Properly handle a STREAM frame with no data but the FIN bit set at the
application layer. H3 and hq-interop decode_qcs() callback have been
adjusted to not return early in this case.
If the FIN bit is accepted, a HTX EOM must be inserted for the upper
stream layer. If the FIN is rejected because the stream cannot be
closed, a proper CONNECTION_CLOSE error will be triggered.
A new utility function qcs_http_handle_standalone_fin() has been
implemented in the qmux_http module. This allows to simply add the HTX
EOM on qcs HTX buffer. If the HTX buffer is empty, a EOT is first added
to ensure it will be transmitted above.
This commit will allow to properly handle FIN notify through an empty
STREAM frame. However, it is not sufficient as currently qcc_recv() skip
the decode_qcs() invocation when the offset is already received. This
will be fixed in the next commit.
This should be backported up to 2.6 along with the next patch.
Several times during debugging it has been difficult to find a way to
reliably indicate if a thread had been started and if it was still
running. It's really not easy because the elements we look at are not
necessarily reliable (e.g. harmless bit or idle bit might not reflect
what we think during a signal). And such notions can be subjective
anyway.
Here we define two thread flags, TH_FL_STARTED which is set as soon as
a thread enters run_thread_poll_loop() and drops the idle bit, and
another one, TH_FL_IN_LOOP, which is set when entering run_poll_loop()
and cleared when leaving it. This should help init/deinit code know
whether it's called from a non-initialized thread (i.e. tid must not
be trusted), or shared functions know if they're being called from a
running thread or from init/deinit code outside of the polling loop.
The new global option "tune.fast-forward" can be set to "off" to disable the
data fast-forward. It is an debug option, thus it is internally marked as
experimental. The directive "expose-experimental-directives" must be set
first to use this one. By default, the data fast-forward is enable.
It could be usefull to force to wake the stream up when data are
received. To be sure, evreything works fine in this case. The data
fast-forward is an optim. It must work without it. But some code may rely on
the fact the stream will not be woken up. With this option, it is possible
to spot some hidden bugs.
The ssl_bind_kw structure is exclusively used for crt-list keyword, it
must be named otherwise to remove the confusion.
The structure was renamed ssl_crtlist_kws.
Implement a basic "show quic" CLI handler. This command will be useful
to display various information on all the active QUIC frontend
connections.
This work is heavily inspired by "show sess". Most notably, a global
list of quic_conn has been introduced to be able to loop over them. This
list is stored per thread in ha_thread_ctx.
Also add three CLI handlers for "show quic" in order to allocate and
free the command context. The dump handler runs on thread isolation.
Each quic_conn is referenced using a back-ref to handle deletion during
handler yielding.
For the moment, only a list of raw quic_conn pointers is displayed. The
handler will be completed over time with more information as needed.
This should be backported up to 2.7.
In check_config_validity() function, we performed some consistency checks to
adjust minconn/maxconn attributes for each declared server.
We move this logic into a dedicated function named srv_minmax_conn_apply()
to be able to perform those checks later in the process life when needed
(ie: dynamic servers)
Deduplicate the code which checks the OCSP update in the ckch_store and
in the crtlist_entry.
Also, jump immediatly to error handling when the ERR_FATAL is catched.
GH issue #2034 clearly indicates yet another case of time roll-over
that went badly. Issues that happen only once every 50 days are hard
to detect and debug, and are usually reported more or less synchronized
from multiple sources. This patch finally does what had long been planned
but never done yet, which is to force the time to wrap early after boot
so that any such remaining issue can be spotted quicker. The margin delay
here is 20s (it may be changed by setting BOOT_TIME_WRAP_SEC to another
value). This value seems sufficient to permit failed health checks to
succeed and traffic to come in and possibly start to update some time
stamps (accept dates in logs, freq counters, stick-tables expiration
dates etc).
It could theoretically be helpful to have this in 2.7, but as can be
seen with the two patches below, we've already had incorrect use cases
of the internal monotonic time when the wall-clock one was needed, so
we could expect to detect other ones in the future. Note that this will
*not* induce bugs, it will only make them happen much faster (i.e. no
need to wait for 50 days before seeing them). If it were to eventually
be backported, these two previous patches must also be backported:
BUG/MINOR: clock: use distinct wall-clock and monotonic start dates
BUG/MEDIUM: cache: use the correct time reference when comparing dates
We've had a start date even before the internal monotonic clock existed,
but once the monotonic clock was added, the start date was not updated
to distinguish the wall clock time units and the internal monotonic time
units. The distinction is important because both clocks do not necessarily
progress at the same speed. The very rare occurrences of the wall-clock
date are essentially for human consumption and communication with third
parties (e.g. report the start date in "show info" for monitoring
purposes). However currently this one is also used to measure the distance
to "now" as being the process' uptime. This is actually not correct. It
only works because for now the two dates are initialized at the exact
same instant at boot but could still be wrong if the system's date shows
a big jump backwards during startup for example. In addition the current
situation prevents us from enforcing an abritrary offset at boot to reveal
some heisenbugs.
This patch adds a new "start_time" at boot that is set from "now" and is
used in uptime calculations. "start_date" instead is now set from "date"
and will always reflect the system date for human consumption (e.g. in
"show info"). This way we're now sure that any drift of the internal
clock relative to the system date will not impact the reported uptime.
This could possibly be backported though it's unlikely that anyone has
ever noticed the problem.
In ("BUG/MEDIUM: stats: Rely on a local trash buffer to dump the stats"),
we forgot to apply the patch in resolvers.c which provides the
stats_dump_resolvers() function that is involved when dumping with "resolvers"
domain.
As a consequence, resolvers dump was broken because stats_dump_one_line(),
which is used in stats_dump_resolv_to_buffer(), implicitely uses trash_chunk
from stats.c to prepare the dump, and stats_putchk() is then called with
global trash (currently empty) as output data.
Given that trash_dump variable is static and thus only available within stats.c
we change stats_putchk() function prototype so that the function does not take
the output buffer as an argument. Instead, stats_putchk() will implicitly use
the local trash_dump variable declared in stats.c.
It will also prevent further mixups between stats_dump_* functions and
stats_putchk().
This needs to be backported with ("BUG/MEDIUM: stats: Rely on a local trash
buffer to dump the stats")
Instead of reading and storing a single group and a single mask for a
"thread" directive on a bind line, we now store the complete range in
a thread set that's stored in the bind_conf. The bind_parse_thread()
function now just calls parse_thread_set() to complete the current set,
which starts empty, and thread_resolve_group_mask() was updated to
support retrieving thread group numbers or absolute thread numbers
directly from the pre-filled thread_set, and continue to feed bind_tgroup
and bind_thread. The CLI parsers which were pre-initialized to set the
bind_tgroup to 1 cannot do it anymore as it would prevent one from
restricting the thread set. Instead check_config_validity() now detects
the CLI frontend and passes the info down to thread_resolve_group_mask()
that will automatically use only the group 1's threads for these
listeners. The same is done for the peers listeners for now.
At this step it's already possible to start with all previous valid
configs as well as extended ones supporting comma-delimited thread
sets. In addition the parser already accepts large ranges spanning
multiple groups, but since the underlying listeners infrastructure
is not read, for now we're maintaining a specific check against this
at the higher level of the config validity check.
The patch is a bit large because thread resolution is performed in
multiple steps, so we need to adjust all of them at once to preserve
functional and technical consistency.
The purpose is to be able to store large thread sets, defined by ranges
that may cross group boundaries, as well as define lists of groups and
masks. The thread_set struct implements the storage, and the parser is
in parse_thread_set(), with a focus on "bind" lines, but not only.
This flag is only used to tag a QUIC listener, which we now know by
its bind_conf's xprt as well. It's only used to decide whether or not
to perform an extra initialization step on the listener. Let's drop it
as well as the flags field.
With the various fields and options moved, the listener struct reduced
by 48 bytes total.
All options that made sense were moved to the bind_conf, and remaining
ones were removed. This field isn't used at all anymore. The thr_idx
field was moved there to plug the hole.
LI_O_TCP_L4_RULES and LI_O_TCP_L5_RULES are only set by from the proxy
based on the presence or absence of tcp_req l4/l5 rules. It's basically
as cheap to check the list as it is to check the flag, except that there
is no need to maintain a copy. Let's get rid of them, and this may ease
addition of more dynamic stuff later.
These two flags are entirely for internal use and are even per proxy
in practice since they're used for peers and CLI to indicate (for the
first one) that the listener(s) are not subject to connection limits,
and for the second that the listener(s) should not be stopped on
soft-stop. No need to keep them in the listeners, let's move them to
the bind_conf under names BC_O_UNLIMITED and BC_O_NOSTOP.
These are only set per bind line and used when creating a sessions,
we can move them to the bind_conf under the names BC_O_ACC_PROXY and
BC_O_ACC_CIP respectively.
