When a certificate entry is being modified, we must take care to no delete
it because the corresponding ongoing transaction still references it. If we
do so, it leads to a null-deref and a crash may be exeperienced if changes
are commited.
This patch must be backported as far as 2.2.
On the CLI, If we fail to commit changes on a CA or a CRL entry, an error
message is returned. This error must be released.
This patch must be backported as far as 2.4.
On the CLI, If we fail to commit changes on a certificate entry, an error
message is returned. This error must be released.
This patch must be backported as far as 2.2.
There's no more reason for keepin the code and definitions in conn_stream,
let's move all that to stconn. The alphabetical ordering of include files
was adjusted.
This file contains all the stream-connector functions that are specific
to application layers of type stream. So let's name it accordingly so
that it's easier to figure what's located there.
The alphabetical ordering of include files was preserved.
The analysis of cs_rx_endp_more() showed that the purpose is for a stream
endpoint to inform the connector that it's ready to deliver more data to
that one, and conversely cs_rx_endp_done() that it's done delivering data
so it should not be bothered again for this.
This was modified two ways:
- the operation is no longer performed on the connector but on the
endpoint so that there is no more doubt when reading applet code
about what this rx refers to; it's the endpoint that has more or
no more data.
- an applet implementation is also provided and mostly used from
applet code since it saves the caller from having to access the
endpoint descriptor.
It's visible that the flag ought to be inverted because some places
have to set it by default for no reason.
We're starting to propagate the stream connector's new name through the
API. Most call places of these functions that retrieve the channel or its
buffer are in applets. The local variable names are not changed in order
to keep the changes small and reviewable. There were ~92 uses of cs_ic(),
~96 of cs_oc() (due to co_get*() being less factorizable than ci_put*),
and ~5 accesses to the buffer itself.
This applies the change so that the applet code stops using ci_putchk()
and friends everywhere possible, for the much saferapplet_put*() instead.
The change is mechanical but large. Two or three functions used to have no
appctx and a cs derived from the appctx instead, which was a reminiscence
of old times' stream_interface. These were simply changed to directly take
the appctx. No sensitive change was performed, and the old (more complex)
API is still usable when needed (e.g. the channel is already known).
The change touched roughly a hundred of locations, with no less than 124
lines removed.
It's worth noting that the stats applet, the oldest of the series, could
get a serious lifting, as it's still very channel-centric instead of
propagating the appctx along the chain. Given that this code doesn't
change often, there's no emergency to clean it up but it would look
better.
This renames the "struct conn_stream" to "struct stconn" and updates
the descriptions in all comments (and the rare help descriptions) to
"stream connector" or "connector". This touches a lot of files but
the change is minimal. The local variables were not even renamed, so
there's still a lot of "cs" everywhere.
If no private key can be found in a bind line's certificate and
ssl-load-extra-files is set to none we end up trying to call
X509_check_private_key with a NULL key, which crashes.
This fix should be backported to all stable branches.
This one is the pointer to the conn_stream which is always in the
endpoint that is always present in the appctx, thus it's not needed.
This patch removes it and replaces it with appctx_cs() instead. A
few occurences that were using __cs_strm(appctx->owner) were moved
directly to appctx_strm() which does the equivalent.
The CRL file CLI update code was strongly based off the CA one and some
copy-paste issues were then introduced.
This patch fixes GitHub issue #1685.
It should be backported to 2.5.
These two commands use distinct parse/release functions but a common
iohandler, thus they need to keep the same context. It was created
under the name "commit_cacrlfile_ctx" and holds a large part of the
pointers (6) and the ca_type field that helps distinguish between
the two commands for the I/O handler. It looks like some of these
fields could have been merged since apparently the CA part only
uses *cafile* and the CRL part *crlfile*, while both old and new
are of type cafile_entry and set only for each type. This could
probably even simplify some parts of the code that tries to use
the correct field.
These fields were the last ones to be migrated thus the appctx's
ssl context could finally be removed.
Just like for "set ssl cafile", the command doesn't really need this
context which doesn't outlive the parsing function but it was there
for a purpose so it's maintained. Only 3 fields were used from the
appctx's ssl context: old_crlfile_entry, new_crlfile_entry, and path.
These ones were reinstantiated into a new "set_crlfile_ctx" struct.
It could have been merged with the one used in "set cafile" if the
fields had been renamed since cafile and crlfile are of the same
type (probably one of them ought to be renamed?).
None of these fields could be dropped as they are still shared with
other commands.
Just like for "set ssl cert", the command doesn't really need this
context which doesn't outlive the parsing function but it was there
for a purpose so it's maintained. Only 3 fields were used from the
appctx's ssl context: old_cafile_entry, new_cafile_entry, and path.
These ones were reinstantiated into a new "set_cafile_ctx" struct.
None of them could be dropped as they are still shared with other
commands.
The command doesn't really need any storage since there's only a parser,
but since it used this context, there might have been plans for extension,
so better continue with a persistent one. Only old_ckchs, new_ckchs, and
path were being used from the appctx's ssl context. There ones moved to
the local definition, and the two former ones were removed from the appctx
since not used anymore.
This command only really uses old_ckchs, new_ckchs and next_ckchi
from the appctx's ssl context. The new structure "commit_cert_ctx"
only has these 3 fields, though none could be removed from the shared
ssl context since they're still used by other commands.
This command only really uses old_ckchs, cur_ckchs and the index
in which the transaction was stored. The new structure "show_cert_ctx"
only has these 3 fields, and the now unused "cur_ckchs" and "index"
could be removed from the shared ssl context.
Now this command doesn't share any context anymore with "show cafile"
nor with the other commands. The previous "cur_cafile_entry" field from
the applet's ssl context was removed as not used anymore. Everything was
moved to show_crlfile_ctx which only has 3 fields.
Saying that the layout and usage of the various variables in the ssl
applet context is a mess would be an understatement. It's very hard
to know what command uses what fields, even after having moved away
from the mix of cli and ssl.
Let's extract the parts used by "show cafile" into their own structure.
Only the "show_all" field would be removed from the ssl ctx, the other
fields are still shared with other commands.
The "show ssl cert" command mixes some generic pointers from the
"ctx.cli" struct with context-specific ones from "ctx.ssl" while both
are in a union. Amazingly, despite the use of both p0 and i0 to store
respectively a pointer to the current ckchs and a transaction id, there
was no overlap with the other pointers used during these operations,
but should these fields be reordered or slightly updated this will break.
Comments were added above the faulty functions to indicate which fields
they are using.
This needs to be backported to 2.5.
The "show ssl crl-file" command mixes some generic pointers from the
"ctx.cli" struct with context-specific ones from "ctx.ssl" while both
are in a union. It's fortunate that the p1 pointer in use is located
before the first one used (it overlaps with old_cafile_entry). But
should these fields be reordered or slightly updated this will break.
This needs to be backported to 2.5.
The "show ssl ca-file <name>" command mixes some generic pointers from
the "ctx.cli" struct and context-specific ones from "ctx.ssl" while both
are in a union. The i0 integer used to store the current ca_index overlaps
with new_crlfile_entry which is thus harmless for now but is at the mercy
of any reordering or addition of these fields. Let's add dedicated fields
into the ssl structure for this.
Comments were added on top of the affected functions to indicate what they
use.
This needs to be backported to 2.5.
The "show ca-file" and "show crl-file" commands mix some generic pointers
from the "ctx.cli" struct and context-specific ones from "ctx.ssl" while
both are in a union. It's fortunate that the p0 pointer in use is located
immediately before the first one used (it overlaps with next_ckchi_link,
and old_cafile_entry is safe). But should these fields be reordered or
slightly updated this will break.
Comments were added on top of the affected functions to indicate what they
use.
This needs to be backported to 2.5.
HAProxy crashes when "show ssl ca-file" is being called on a ca-file
which contains a lot of certificates. (127 in our test with
/etc/ssl/certs/ca-certificates.crt).
The root cause is the fonction does not yield when there is no available
space when writing the details, and we could write a lot.
To fix the issue, we try to put the data with ci_putchk() after every
show_cert_detail() and we yield if the ci_putchk() fails.
This patch also cleans up a little bit the code:
- the end label is now a real end with a return 1;
- i0 is used instead of (long)p1
- the ID is stored upon yield
The cafile_tree was never free upon deinit, making valgrind and ASAN
complains when haproxy quits.
This could be backported as far as 2.2 but it requires the
ssl_store_delete_cafile_entry() helper from
5daff3c8ab.
Remaining flags and associated functions are move in the conn-stream
scope. These flags are added on the endpoint and not the conn-stream
itself. This way it will be possible to get them from the mux or the
applet. The functions to get or set these flags are renamed accordingly with
the "cs_" prefix and updated to manipualte a conn-stream instead of a
stream-interface.
At many places, we now use the new CS functions to get a stream or a channel
from a conn-stream instead of using the stream-interface API. It is the
first step to reduce the scope of the stream-interfaces. The main change
here is about the applet I/O callback functions. Before the refactoring, the
stream-interface was the appctx owner. Thus, it was heavily used. Now, as
far as possible,the conn-stream is used. Of course, it remains many calls to
the stream-interface API.
There were empty lines in the output of "show ssl ca-file <cafile>" and
"show ssl crl-file <crlfile>" commands when an empty line should only
mark the end of the output. This patch adds a space to those lines.
This patch should be backported to 2.5.
ssl_store_load_locations_file() is using X509_get_default_cert_dir()
when using '@system-ca' as a parameter.
This function could return a NULL if OpenSSL was built with a
X509_CERT_DIR set to NULL, this is uncommon but let's fix this.
No backport needed, 2.6 only.
Fix issue #1637.
Previous patch was accidentaly breaking upon an error when itarating
through a CA directory. This is not the expected behavior, the function
must start processing the other files after the warning.
This patch implements the ability to load a certificate directory with
the "ca-file" directive.
The X509_STORE_load_locations() API does not allow to cache a directory
in memory at startup, it only references the directory to allow a lookup
of the files when needed. But that is not compatible with the way
HAProxy works, without any access to the filesystem.
The current implementation loads every ".pem", ".crt", ".cer", and
".crl" available in the directory which is what is done when using
c_rehash and X509_STORE_load_locations(). Those files are cached in the
same X509_STORE referenced by the directory name. When looking at "show ssl
ca-file", everything will be shown in the same entry.
This will eventually allow to load more easily the CA of the system,
which could already be done with "ca-file /etc/ssl/certs" in the
configuration.
Loading failure intentionally emit a warning instead of an alert,
letting HAProxy starts when one of the files can't be loaded.
Known limitations:
- There is a bug in "show ssl ca-file", once the buffer is full, the
iohandler is not called again to output the next entries.
- The CLI API is kind of limited with this, since it does not allow to
add or remove a entry in a particular ca-file. And with a lot of
CAs you can't push them all in a buffer. It probably needs a "add ssl
ca-file" like its done with the crt-list.
Fix issue #1476.
The CertCache.set() function allows to update an SSL certificate file
stored in the memory of the HAProxy process. This function does the same
as "set ssl cert" + "commit ssl cert" over the CLI.
This could be used to update the crt and key, as well as the OCSP, the
SCTL, and the OSCP issuer.
The implementation does yield every 10 ckch instances, the same way the
"commit ssl cert" do.
Simplify the "cert_exts" array which is used for the selection of the
parsing function depending on the extension.
It now uses a pointer to an array element instead of an index, which is
simplier for the declaration of the array.
This way also allows to have multiple extension using the same type.
Extract the code that replace the ckch_store and its dependencies into
the ckch_store_replace() function.
This function must be used under the global ckch lock.
It frees everything related to the old ckch_store.
Because appctx is now an endpoint of the conn-stream, there is no reason to
still have the stream-interface as appctx owner. Thus, the conn-stream is
now the appctx owner.
The b_istput function called to append the last data block to the end of
an OCSP response's detailed output was not checked in
ssl_ocsp_response_print. The ssl_ocsp_response_print return value checks
were added as well since some of them were missing.
This error was raised by Coverity (CID 1469513).
This patch fixes GitHub issue #1541.
It can be backported to 2.5.
DH structure is a low-level one that should not be used anymore with
OpenSSLv3. All functions working on DH were marked as deprecated and
this patch replaces the ones we used with new APIs recommended in
OpenSSLv3, be it in the migration guide or the multiple new manpages
they created.
This patch replaces all mentions of the DH type by the HASSL_DH one,
which will be replaced by EVP_PKEY with OpenSSLv3 and will remain DH on
older versions. It also uses all the newly created helper functions that
enable for instance to load DH parameters from a file into an EVP_PKEY,
or to set DH parameters into an SSL_CTX for use in a DHE negotiation.
The following deprecated functions will effectively disappear when
building with OpenSSLv3 : DH_set0_pqg, PEM_read_bio_DHparams, DH_new,
DH_free, DH_up_ref, SSL_CTX_set_tmp_dh.
__ssl_sock_load_new_ckch_instance() does not free correctly the SNI in
the session cache, it only frees the one in the current tid.
This bug was introduced with e18d4e8 ("BUG/MEDIUM: ssl: backend TLS
resumption with sni and TLSv1.3").
This fix must be backported where the mentionned commit was backported.
(all maintained versions).
When establishing an outboud connection, haproxy checks if the cached
TLS session has the same SNI as the connection we are trying to
resume.
This test was done by calling SSL_get_servername() which in TLSv1.2
returned the SNI. With TLSv1.3 this is not the case anymore and this
function returns NULL, which invalidates any outboud connection we are
trying to resume if it uses the sni keyword on its server line.
This patch fixes the problem by storing the SNI in the "reused_sess"
structure beside the session itself.
The ssl_sock_set_servername() now has a RWLOCK because this session
cache entry could be accessed by the CLI when trying to update a
certificate on the backend.
This fix must be backported in every maintained version, however the
RWLOCK only exists since version 2.4.
The ifdefs surrounding the "show ssl ocsp-response" functionality that
were supposed to disable the code with BoringSSL were built the wrong
way.
It does not need to be backported.
Add the ability to dump an OCSP response details through a call to "show
ssl cert cert.pem.ocsp". It can also be used on an ongoing transaction
by prefixing the certificate name with a '*'.
Even if the ckch structure holds an ocsp_response buffer, we still need
to look for the actual ocsp response entry in the ocsp response tree
rather than just dumping the ckch's buffer details because when updating
an ocsp response through a "set ssl ocsp-response" call, the
corresponding buffer in the ckch is not updated accordingly. So this
buffer, even if it is not empty, might hold an outdated ocsp response.
This patch adds an "OCSP Response Key" information in the output of a
"show ssl cert <certfile>" call. The key can then be used in a "show ssl
ocsp-response <key>" CLI command.
The following functions used in CA/CRL file hot update were not defined
in OpenSSL 1.0.2 so they need to be defined in openssl-compat :
- X509_CRL_get_signature_nid
- X509_CRL_get0_lastUpdate
- X509_CRL_get0_nextUpdate
- X509_REVOKED_get0_serialNumber
- X509_REVOKED_get0_revocationDate
The CA/CRL hot update patches did not compile on some targets of the CI
(mainly gcc + ssl). This patch should fix almost all of them. It adds
missing variable initializations and return value checks to the
BIO_reset calls in show_crl_detail.
This patch adds the "show ssl crl-file [<crlfile>]" CLI command. This
command can be used to display the list of all the known CRL files when
no specific file name is specified, or to display the details of a
specific CRL file when a name is given.
The details displayed for a specific CRL file are inspired by the ones
shown by a "openssl crl -text -noout -in <filename>".
The "abort" command aborts an ongoing transaction started by a "set ssl
crl-file" command. Since the updated CRL file data is not pushed into
the CA file tree until a "commit ssl crl-file" call is performed, the
abort command simply deleted the new cafile_entry (storing the new CRL
file data) stored in the transaction.
This patch adds the "new ssl crl-file" and "del ssl crl-file" CLI
commands.
The "new" command can be used to create a new empty CRL file that can be
filled in thanks to a "set ssl crl-file" command. It can then be used in
a new crt-list line.
The newly created CRL file is added to the CA file tree so any call to
"show ssl crl-file" will display its name.
The "del" command allows to delete an unused CRL file. A CRL file will
be considered unused if its list of ckch instances is empty. It does not
work on an uncommitted CRL file transaction created via a "set ssl
crl-file" command call.
This patch adds the "set ssl crl-file" and "commit ssl crl-file"
commands, following the same logic as the certificate and CA file update
equivalents.
When trying to update a Certificate Revocation List (CRL) file via a
"set" command, we start by looking for the entry in the CA file tree and
then building a new cafile_entry out of the payload, without adding it
to the tree yet. It will only be added when a "commit" command is
called.
During a "commit" command, we insert the newly built cafile_entry in the
CA file tree while keeping the previous entry. We then iterate over all
the instances that used the CRL file and rebuild a new one and its
dedicated SSL context for every one of them.
When all the contexts are properly created, the old instances get
replaced by the new ones and the old CRL file is removed from the tree.
In order for crl-file hot update to be possible, we need to add an extra
link between the CA file tree entries that hold Certificate Revocation
Lists and the instances that use them. This way we will be able to
rebuild each instance upon CRL modification.
This mechanism is similar to what was made for the actual CA file update
since both the CA files and the CRL files are stored in the same CA file
tree.
This patch adds the "del ssl ca-file <cafile>" CLI command which can be
used to delete an unused CA file.
The CA file will be considered unused if its list of ckch instances is
empty. This command cannot be used to delete the uncommitted CA file of
a previous "set ssl ca-file" without commit. It only acts on
CA file entries already inserted in the CA file tree.
This fixes a subpart of GitHub issue #1057.
This patch adds the "new ssl ca-file <cafile>" CLI command. This command
can be used to create a new empty CA file that can be filled in thanks
to a "set ssl ca-file" command. It can then be used in a new crt-list
line.
The newly created CA file is added directly in the cafile tree so any
following "show ssl ca-file" call will display its name.
This fixes a subpart of GitHub issue #1057.
This patch adds the "show ssl ca-file [<cafile>[:index]]" CLI command.
This command can be used to display the list of all the known CA files
when no specific file name is specified, or to display the details of a
specific CA file when a name is given. If an index is given as well, the
command will only display the certificate having the specified index in
the CA file (if it exists).
The details displayed for each certificate are the same as the ones
showed when using the "show ssl cert" command on a single certificate.
This fixes a subpart of GitHub issue #1057.
The CA files and CRL files are stored in the same cafile_tree so this
patch adds a new field the the cafile_entry structure that specifies the
type of the entry. Since a ca-file can also have some CRL sections, the
type will be based on the option used to load the file and not on its
content (ca-file vs crl-file options).
The "abort" command aborts an ongoing transaction started by a "set ssl
ca-file" command. Since the updated CA file data is not pushed into the
cafile tree until a "commit ssl ca-file" call is performed, the abort
command simply clears the new cafile_entry that was stored in the
cafile_transaction.
This fixes a subpart of GitHub issue #1057.
This patch adds the "set ssl ca-file" and "commit ssl ca-file" commands,
following the same logic as the certificate update equivalents.
When trying to update a ca-file entry via a "set" command, we start by
looking for the entry in the cafile_tree and then building a new
cafile_entry out of the given payload. This new object is not added to
the cafile_tree until "commit" is called.
During a "commit" command, we insert the newly built cafile_entry in the
cafile_tree, while keeping the previous entry as well. We then iterate
over all the instances linked in the old cafile_entry and rebuild a new
ckch instance for every one of them. The newly inserted cafile_entry is
used for all those new instances and their respective SSL contexts.
When all the contexts are properly created, the old instances get
replaced by the new ones and the old cafile_entry is removed from the
tree.
This fixes a subpart of GitHub issue #1057.
The process of rebuilding a ckch_instance when a certificate is updated
through a cli command will be roughly the same when a ca-file is updated
so this factorization will avoid code duplication.
Adds a way to insert a new uncommitted cafile_entry in the tree. This
entry will be the one fetched by any lookup in the tree unless the
oldest cafile_entry is explicitely looked for. This way, until a "commit
ssl ca-file" command is completed, there could be two cafile_entries
with the same path in the tree, the original one and the newly updated
one.
The updated CA content coming from the CLI during a ca-file update will
directly be in memory and not on disk so the way CAs are loaded in a
cafile_entry for now (via X509_STORE_load_locations calls) cannot be
used.
This patch adds a way to fill a cafile_entry directly from memory and to
load the contained certificate and CRL sections into an SSL store.
CRL sections are managed as well as certificates in order to mimic the
way CA files are processed when specified in an option. Indeed, when
parsing a CA file given through a ca-file or ca-verify-file option, we
iterate over the different sections in ssl_set_cert_crl_file and load
them regardless of their type. This ensures that a file that was
properly parsed when given as an option will also be accepted by the
CLI.
Each ca-file entry of the tree will now hold a list of the ckch
instances that use it so that we can iterate over them when updating the
ca-file via a cli command. Since the link between the SSL contexts and
the CA file tree entries is only built during the ssl_sock_prepare_ctx
function, which are called after all the ckch instances are created, we
need to add a little post processing after each ssl_sock_prepare_ctx
that builds the link between the corresponding ckch instance and CA file
tree entries.
In order to manage the ca-file and ca-verify-file options, any ckch
instance can be linked to multiple CA file tree entries and any CA file
entry can link multiple ckch instances. This is done thanks to a
dedicated list of ckch_inst references stored in the CA file tree
entries over which we can iterate (during an update for instance). We
avoid having one of those instances go stale by keeping a list of
references to those references in the instances.
When deleting a ckch_inst, we can then remove all the ckch_inst_link
instances that reference it, and when deleting a cafile_entry, we
iterate over the list of ckch_inst reference and clear the corresponding
entry in their own list of ckch_inst_link references.
In order to ease ca-file hot update via the CLI, the ca-file tree will
need to allow duplicate entries for a given path. This patch simply
enables it and offers a way to select either the oldest entry or the
latest entry in the tree for a given path.
This patch moves all the ssl_store related code to ssl_ckch.c since it
will mostly be used there once the CA file update CLI commands are all
implemented. It also makes the cafile_entry structure visible as well as
the cafile_tree.
There were 102 CLI commands whose help were zig-zagging all along the dump
making them unreadable. This patch realigns all these messages so that the
command now uses up to 40 characters before the delimiting colon. About a
third of the commands did not correctly list their arguments which were
added after the first version, so they were all updated. Some abuses of
the term "id" were fixed to use a more explanatory term. The
"set ssl ocsp-response" command was not listed because it lacked a help
message, this was fixed as well. The deprecated enable/disable commands
for agent/health/server were prominently written as deprecated. Whenever
possible, clearer explanations were provided.
This bug was introduced in e5ff4ad ("BUG/MINOR: ssl: fix a trash buffer
leak in some error cases").
When cli_parse_set_cert() returns because alloc_trash_chunk() failed, it
does not unlock the spinlock which can lead to a deadlock later.
Must be backported as far as 2.1 where e5ff4ad was backported.
The return value check was wrongly based on error codes when the
function actually returns an error number.
This bug was introduced by f3eedfe195
which is a feature not present before branch 2.4.
It does not need to be backported.
The current "ADD" vs "ADDQ" is confusing because when thinking in terms
of appending at the end of a list, "ADD" naturally comes to mind, but
here it does the opposite, it inserts. Several times already it's been
incorrectly used where ADDQ was expected, the latest of which was a
fortunate accident explained in 6fa922562 ("CLEANUP: stream: explain
why we queue the stream at the head of the server list").
Let's use more explicit (but slightly longer) names now:
LIST_ADD -> LIST_INSERT
LIST_ADDQ -> LIST_APPEND
LIST_ADDED -> LIST_INLIST
LIST_DEL -> LIST_DELETE
The same is true for MT_LISTs, including their "TRY" variant.
LIST_DEL_INIT keeps its short name to encourage to use it instead of the
lazier LIST_DELETE which is often less safe.
The change is large (~674 non-comment entries) but is mechanical enough
to remain safe. No permutation was performed, so any out-of-tree code
can easily map older names to new ones.
The list doc was updated.
This makes the code more readable and less prone to copy-paste errors.
In addition, it allows to place some __builtin_constant_p() predicates
to trigger a link-time error in case the compiler knows that the freed
area is constant. It will also produce compile-time error if trying to
free something that is not a regular pointer (e.g. a function).
The DEBUG_MEM_STATS macro now also defines an instance for ha_free()
so that all these calls can be checked.
178 occurrences were converted. The vast majority of them were handled
by the following Coccinelle script, some slightly refined to better deal
with "&*x" or with long lines:
@ rule @
expression E;
@@
- free(E);
- E = NULL;
+ ha_free(&E);
It was verified that the resulting code is the same, more or less a
handful of cases where the compiler optimized slightly differently
the temporary variable that holds the copy of the pointer.
A non-negligible amount of {free(str);str=NULL;str_len=0;} are still
present in the config part (mostly header names in proxies). These
ones should also be cleaned for the same reasons, and probably be
turned into ist strings.
A potential null pointer dereference was reported with an old gcc
version (6.5)
src/ssl_ckch.c: In function 'cli_parse_set_cert':
src/ssl_ckch.c:844:7: error: potential null pointer dereference [-Werror=null-dereference]
if (!ssl_sock_copy_cert_key_and_chain(src->ckch, dst->ckch))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/ssl_ckch.c:844:7: error: potential null pointer dereference [-Werror=null-dereference]
src/ssl_ckch.c: In function 'ckchs_dup':
src/ssl_ckch.c:844:7: error: potential null pointer dereference [-Werror=null-dereference]
if (!ssl_sock_copy_cert_key_and_chain(src->ckch, dst->ckch))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/ssl_ckch.c:844:7: error: potential null pointer dereference [-Werror=null-dereference]
This could happen if ckch_store_new() fails to allocate memory and returns NULL.
This patch must be backported with 8f71298 since it was wrongly fixed and
the bug could happen.
Must be backported as far as 2.2.
A potential null pointer dereference was reported with an old gcc
version (6.5)
src/ssl_ckch.c: In function 'cli_parse_set_cert':
src/ssl_ckch.c:838:7: error: potential null pointer dereference [-Werror=null-dereference]
if (!ssl_sock_copy_cert_key_and_chain(src->ckch, dst->ckch))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/ssl_ckch.c:838:7: error: potential null pointer dereference [-Werror=null-dereference]
src/ssl_ckch.c: In function 'ckchs_dup':
src/ssl_ckch.c:838:7: error: potential null pointer dereference [-Werror=null-dereference]
if (!ssl_sock_copy_cert_key_and_chain(src->ckch, dst->ckch))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/ssl_ckch.c:838:7: error: potential null pointer dereference [-Werror=null-dereference]
cc1: all warnings being treated as errors
This case does not actually happen but it's better to fix the ckch API
with a NULL check.
Could be backported as far as 2.1.
SCTL (signed certificate timestamp list) specified in RFC6962
was implemented in c74ce24cd22e8c683ba0e5353c0762f8616e597d, let
us introduce macro HAVE_SSL_SCTL for the HAVE_SSL_SCTL sake,
which in turn is based on SN_ct_cert_scts, which comes in the same commit
When adding the server side support for certificate update over the CLI
we encountered a design problem with the SSL session cache which was not
locked.
Indeed, once a certificate is updated we need to flush the cache, but we
also need to ensure that the cache is not used during the update.
To prevent the use of the cache during an update, this patch introduce a
rwlock for the SSL server session cache.
In the SSL session part this patch only lock in read, even if it writes.
The reason behind this, is that in the session part, there is one cache
storage per thread so it is not a problem to write in the cache from
several threads. The problem is only when trying to write in the cache
from the CLI (which could be on any thread) when a session is trying to
access the cache. So there is a write lock in the CLI part to prevent
simultaneous access by a session and the CLI.
This patch also remove the thread_isolate attempt which is eating too
much CPU time and was not protecting from the use of a free ptr in the
session.
Flush the SSL session cache when updating a certificate which is used on a
server line. This prevent connections to be established with a cached
session which was using the previous SSL_CTX.
This patch also replace the ha_barrier with a thread_isolate() since there
are more operations to do. The reg-test was also updated to remove the
'no-ssl-reuse' keyword which is now uneeded.
The "abort ssl cert" command is buggy and removes the current ckch store,
and instances, leading to SNI removal. It must only removes the new one.
This patch also adds a check in set_ssl_cert.vtc and
set_ssl_server_cert.vtc.
Must be backported as far as 2.2.
Use chunk_inistr() for a chunk initialisation in
ssl_sock_load_sctl_from_file() instead of a manual initialisation which
was not initialising head.
Fix issue #1073.
Must be backported as far as 2.2
Since the server SSL_CTX is now stored in the ckch_inst, it is not
needed anymore to pass an SSL_CTX to ckch_inst_new_load_srv_store() and
ssl_sock_load_srv_ckchs().
The new feature allowing the change of server side certificates
introduced duplicated free code. Rework the code in
cli_io_handler_commit_cert() to be more consistent.
When trying to update a backend certificate, we should find a
server-side ckch instance thanks to which we can rebuild a new ssl
context and a new ckch instance that replace the previous ones in the
server structure. This way any new ssl session will be built out of the
new ssl context and the newly updated certificate.
This resolves a subpart of GitHub issue #427 (the certificate part)
In order for the backend server's certificate to be hot-updatable, it
needs to fit into the implementation used for the "bind" certificates.
This patch follows the architecture implemented for the frontend
implementation and reuses its structures and general function calls
(adapted for the server side).
The ckch store logic is kept and a dedicated ckch instance is used (one
per server). The whole sni_ctx logic was not kept though because it is
not needed.
All the new functions added in this patch are basically server-side
copies of functions that already exist on the frontend side with all the
sni and bind_cond references removed.
The ckch_inst structure has a new 'is_server_instance' flag which is
used to distinguish regular instances from the server-side ones, and a
new pointer to the server's structure in case of backend instance.
Since the new server ckch instances are linked to a standard ckch_store,
a lookup in the ckch store table will succeed so the cli code used to
update bind certificates needs to be covered to manage those new server
side ckch instances.
In issue #1004, it was reported that it is not possible to remove
correctly a certificate after updating it when it came from a crt-list.
Indeed the "commit ssl cert" command on the CLI does not update the list
of ckch_inst in the crtlist_entry. Because of this, the "del ssl
crt-list" command does not remove neither the instances nor the SNIs
because they were never linked to the crtlist_entry.
This patch fixes the issue by inserting the ckch_inst in the
crtlist_entry once generated.
Must be backported as far as 2.2.
In order to be compatible with the "set ssl cert" command of the CLI,
this patch restrict the ssl-load-extra-del-ext to files with a ".crt"
extension in the configuration.
Related to issue #785.
Should be backported where 8e8581e ("MINOR: ssl: 'ssl-load-extra-del-ext'
removes the certificate extension") was backported.
In issue #785, users are reporting that it's not convenient to load a
".crt.key" when the configuration contains a ".crt".
This option allows to remove the extension of the certificate before
trying to load any extra SSL file (.key, .ocsp, .sctl, .issuer etc.)
The patch changes a little bit the way ssl_sock_load_files_into_ckch()
looks for the file.
