tcpcheck error messages include the step id where the error occurs.
In some cases, this is not enough. Now, HAProxy also use the comment
field of the latest tcpcheck rule which has been run.
This commit allows HAProxy to parse a new directive in the tcpcheck
ruleset: 'comment'.
It is used to setup comments on the current tcpcheck rules.
This patch introduces quoting which allows to write configuration string
including spaces without escaping them.
Strong (with single quotes) and weak (with double quotes) quoting are
supported. Weak quoting supports escaping and special characters when
strong quoting does not interpret anything.
This patch could break configuration files where ' and " where used.
Chad Lavoie reported an interesting regression caused by the latest
updates to automatically detect the processes a peers section runs on.
It turns out that if a config has neither nbproc nor a bind-process
statement and depending on the frontend->backend chaining, it is possible
to evade all bind_proc propagations, resulting in assigning only ~0UL (all
processes, which is 32 or 64) without ever restricting it to nbproc. It
was not visible in backends until they started to reference peers sections
which saw themselves with 64 processes at once.
This patch addresses this by replacing all those ~0UL with nbits(nbproc).
That way all "bind-process" settings *default* to the number of processes
defined in nbproc instead of 32 or 64.
This fix could possibly be backported into 1.5, though there is no indication
that this bug could have any effect there.
It is sometimes desirable to wait for the body of an HTTP request before
taking a decision. This is what is being done by "balance url_param" for
example. The first use case is to buffer requests from slow clients before
connecting to the server. Another use case consists in taking the routing
decision based on the request body's contents. This option placed in a
frontend or backend forces the HTTP processing to wait until either the whole
body is received, or the request buffer is full, or the first chunk is
complete in case of chunked encoding. It can have undesired side effects with
some applications abusing HTTP by expecting unbufferred transmissions between
the frontend and the backend, so this should definitely not be used by
default.
Note that it would not work for the response because we don't reset the
message state before starting to forward. For the response we need to
1) reset the message state to MSG_100_SENT or BODY , and 2) to reset
body_len in case of chunked encoding to avoid counting it twice.
If a peers section is bound to no process, it's silently discarded. If its
bound to multiple processes, an error is emitted and the process will not
start.
Sometimes it's very hard to disable the use of peers because an empty
section is not valid, so it is necessary to comment out all references
to the section, and not to forget to restore them in the same state
after the operation.
Let's add a "disabled" keyword just like for proxies. A ->state member
in the peers struct is even present for this purpose but was never used
at all.
Maybe it would make sense to backport this to 1.5 as it's really cumbersome
there.
It's dangerous to initialize stick-tables before peers because they
start a task that cannot be stopped before we know if the peers need
to be disabled and destroyed. Move this after.
If a table in a disabled proxy references a peers section, the peers
name is not resolved to a pointer to a table, but since it belongs to
a union, it can later be dereferenced. Right now it seems it cannot
happen, but it definitely will after the pending changes.
It doesn't cost anything to backport this into 1.5, it will make gdb
sessions less head-scratching.
Recently some browsers started to implement a "pre-connect" feature
consisting in speculatively connecting to some recently visited web sites
just in case the user would like to visit them. This results in many
connections being established to web sites, which end up in 408 Request
Timeout if the timeout strikes first, or 400 Bad Request when the browser
decides to close them first. These ones pollute the log and feed the error
counters. There was already "option dontlognull" but it's insufficient in
this case. Instead, this option does the following things :
- prevent any 400/408 message from being sent to the client if nothing
was received over a connection before it was closed ;
- prevent any log from being emitted in this situation ;
- prevent any error counter from being incremented
That way the empty connection is silently ignored. Note that it is better
not to use this unless it is clear that it is needed, because it will hide
real problems. The most common reason for not receiving a request and seeing
a 408 is due to an MTU inconsistency between the client and an intermediary
element such as a VPN, which blocks too large packets. These issues are
generally seen with POST requests as well as GET with large cookies. The logs
are often the only way to detect them.
This patch should be backported to 1.5 since it avoids false alerts and
makes it easier to monitor haproxy's status.
The principle of this cache is to have a global cache for all pattern
matching operations which rely on lists (reg, sub, dir, dom, ...). The
input data, the expression and a random seed are used as a hashing key.
The cached entries contains a pointer to the expression and a revision
number for that expression so that we don't accidently used obsolete
data after a pattern update or a very unlikely hash collision.
Regarding the risk of collisions, 10k entries at 10k req/s mean 1% risk
of a collision after 60 years, that's already much less than the memory's
reliability in most machines and more durable than most admin's life
expectancy. A collision will result in a valid result to be returned
for a different entry from the same list. If this is not acceptable,
the cache can be disabled using tune.pattern.cache-size.
A test on a file containing 10k small regex showed that the regex
matching was limited to 6k/s instead of 70k with regular strings.
When enabling the LRU cache, the performance was back to 70k/s.
This concerns everythins related to accepting a new session and
expiring the embryonic session. There's still a hard-coded call
to stream_accept_session() which could be set somewhere in the
frontend, but for now it's not a problem.
With HTTP/2, we'll have to support multiplexed streams. A stream is in
fact the largest part of what we currently call a session, it has buffers,
logs, etc.
In order to catch any error, this commit removes any reference to the
struct session and tries to rename most "session" occurrences in function
names to "stream" and "sess" to "strm" when that's related to a session.
The files stream.{c,h} were added and session.{c,h} removed.
The session will be reintroduced later and a few parts of the stream
will progressively be moved overthere. It will more or less contain
only what we need in an embryonic session.
Sample fetch functions and converters will have to change a bit so
that they'll use an L5 (session) instead of what's currently called
"L4" which is in fact L6 for now.
Once all changes are completed, we should see approximately this :
L7 - http_txn
L6 - stream
L5 - session
L4 - connection | applet
There will be at most one http_txn per stream, and a same session will
possibly be referenced by multiple streams. A connection will point to
a session and to a stream. The session will hold all the information
we need to keep even when we don't yet have a stream.
Some more cleanup is needed because some code was already far from
being clean. The server queue management still refers to sessions at
many places while comments talk about connections. This will have to
be cleaned up once we have a server-side connection pool manager.
Stream flags "SN_*" still need to be renamed, it doesn't seem like
any of them will need to move to the session.
This will be useful later to state that some listeners have to use
certain decoders (typically an HTTP/2 decoder) regardless of the
regular processing applied to other listeners. For now it simply
defaults to the frontend's default target, and it is used by the
session.
Listerner->timeout is a vestigal thing going back to 2007 or so. It
used to only be used by stats and peers frontends to hold a pointer
to the proxy's client timeout. Now that we use regular frontends, we
don't use it anymore.
The peers frontend timeout was mistakenly set on timeout.connect instead
of timeout.client, resulting in no timeout being applied to the peers
connections. The impact is just that peers can establish connections and
remain connected until they speak. Once they start speaking, only one of
them will still be accepted, and old sessions will be killed, so the
problem is limited. This fix should however be backported to 1.5 since
it was introduced in 1.5-dev3 with peers.
Until now, the TLS ticket keys couldn't have been configured and
shared between multiple instances or multiple servers running HAproxy.
The result was that if a request got a TLS ticket from one instance/server
and it hits another one afterwards, it will have to go through the full
SSL handshake and negotation.
This patch enables adding a ticket file to the bind line, which will be
used for all SSL contexts created from that bind line. We can use the
same file on all instances or servers to mitigate this issue and have
consistent TLS tickets assigned. Clients will no longer have to negotiate
every time they change the handling process.
Signed-off-by: Nenad Merdanovic <nmerdan@anine.io>
This patch adds a new option which allows configuration of the maximum
log level of messages for which email alerts will be sent.
The default is alert which is more restrictive than
the current code which sends email alerts for all priorities.
That behaviour may be configured using the new configuration
option to set the maximum level to notice or greater.
email-alert level notice
Signed-off-by: Simon Horman <horms@verge.net.au>
This currently does nothing beyond parsing the configuration
and storing in the proxy as there is no implementation of email alerts.
Signed-off-by: Simon Horman <horms@verge.net.au>
As mailer and mailers structures and allow parsing of
a mailers section into those structures.
These structures will subsequently be freed as it is
not yet possible to use reference them in the configuration.
Signed-off-by: Simon Horman <horms@verge.net.au>
disable starts a server in the disabled state, however setting the health
of an agent implies that the agent is disabled as well as the server.
This is a problem because the state of the agent is not restored if
the state of the server is subsequently updated leading to an
unexpected state.
For example, if a server is started disabled and then the server
state is set to ready then without this change show stat indicates
that the server is "DOWN (agent)" when it is expected that the server
would be UP if its (non-agent) health check passes.
Reported-by: Mark Brooks <mark@loadbalancer.org>
Signed-off-by: Simon Horman <horms@verge.net.au>
This is equivalent to what was done in commit 48936af ("[MINOR] log:
ability to override the syslog tag") but this time instead of doing
this globally, it does it per proxy. The purpose is to be able to use
a separate log tag for various proxies (eg: make it easier to route
log messages depending on the customer).
This setting is used to limit memory usage without causing the alloc
failures caused by "-m". Unexpectedly, tests have shown a performance
boost of up to about 18% on HTTP traffic when limiting the number of
buffers to about 10% of the amount of concurrent connections.
tune.buffers.limit <number>
Sets a hard limit on the number of buffers which may be allocated per process.
The default value is zero which means unlimited. The minimum non-zero value
will always be greater than "tune.buffers.reserve" and should ideally always
be about twice as large. Forcing this value can be particularly useful to
limit the amount of memory a process may take, while retaining a sane
behaviour. When this limit is reached, sessions which need a buffer wait for
another one to be released by another session. Since buffers are dynamically
allocated and released, the waiting time is very short and not perceptible
provided that limits remain reasonable. In fact sometimes reducing the limit
may even increase performance by increasing the CPU cache's efficiency. Tests
have shown good results on average HTTP traffic with a limit to 1/10 of the
expected global maxconn setting, which also significantly reduces memory
usage. The memory savings come from the fact that a number of connections
will not allocate 2*tune.bufsize. It is best not to touch this value unless
advised to do so by an haproxy core developer.
Used in conjunction with the dynamic buffer allocator.
tune.buffers.reserve <number>
Sets the number of buffers which are pre-allocated and reserved for use only
during memory shortage conditions resulting in failed memory allocations. The
minimum value is 2 and is also the default. There is no reason a user would
want to change this value, it's mostly aimed at haproxy core developers.
Immo Goltz reported a case of segfault while parsing the config where
we try to propagate processes across stopped frontends (those with a
"disabled" statement). The fix is trivial. The workaround consists in
commenting out these frontends, although not always easy.
This fix must be backported to 1.5.
propagate_processes() has a typo in a condition :
if (!from->cap & PR_CAP_FE)
return;
The return is never taken because each proxy has at least one capability
so !from->cap always evaluates to zero. Most of the time the caller already
checks that <from> is a frontend. In the cases where it's not tested
(use_backend, reqsetbe), the rules have been checked for the context to
be a frontend as well, so in the end it had no nasty side effect.
This should be backported to 1.5.
Since during parsing stage, curproxy always represents a proxy to be operated,
it should be a mistake by referring proxy.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
This patch makes it possible to create binds and servers in separate
namespaces. This can be used to proxy between multiple completely independent
virtual networks (with possibly overlapping IP addresses) and a
non-namespace-aware proxy implementation that supports the proxy protocol (v2).
The setup is something like this:
net1 on VLAN 1 (namespace 1) -\
net2 on VLAN 2 (namespace 2) -- haproxy ==== proxy (namespace 0)
net3 on VLAN 3 (namespace 3) -/
The proxy is configured to make server connections through haproxy and sending
the expected source/target addresses to haproxy using the proxy protocol.
The network namespace setup on the haproxy node is something like this:
= 8< =
$ cat setup.sh
ip netns add 1
ip link add link eth1 type vlan id 1
ip link set eth1.1 netns 1
ip netns exec 1 ip addr add 192.168.91.2/24 dev eth1.1
ip netns exec 1 ip link set eth1.$id up
...
= 8< =
= 8< =
$ cat haproxy.cfg
frontend clients
bind 127.0.0.1:50022 namespace 1 transparent
default_backend scb
backend server
mode tcp
server server1 192.168.122.4:2222 namespace 2 send-proxy-v2
= 8< =
A bind line creates the listener in the specified namespace, and connections
originating from that listener also have their network namespace set to
that of the listener.
A server line either forces the connection to be made in a specified
namespace or may use the namespace from the client-side connection if that
was set.
For more documentation please read the documentation included in the patch
itself.
Signed-off-by: KOVACS Tamas <ktamas@balabit.com>
Signed-off-by: Sarkozi Laszlo <laszlo.sarkozi@balabit.com>
Signed-off-by: KOVACS Krisztian <hidden@balabit.com>
Tom Limoncelli from Stack Exchange reported a minor bug : the frontend
inherits the LB parameters from the defaults sections. The impact is
that if a "balance" directive uses any L7 parameter in the defaults
sections and the frontend is in TCP mode, a warning is emitted about
their incompatibility. The warning is harmless but a valid, sane config
should never cause any warning to be reported.
This fix should be backported into 1.5 and possibly 1.4.
Paul Taylor and Bryan Talbot found that after commit 419ead8 ("MEDIUM:
config: compute the exact bind-process before listener's maxaccept"),
a backend marked "disabled" would cause the next backend to be skipped
and if it was the last one it would cause a segfault.
The reason is that the commit above changed the "while" loop for a "for"
loop but a "continue" statement still incrementing the current proxy was
left in the code for disabled proxies, causing the next one to be skipped
as well and the last one to try to dereference NULL when seeking ->next.
The quick workaround consists in not disabling backends, or adding an
empty dummy one after a disabled section.
This fix must be backported to 1.5.
A segfault was reported with the introduction of the propagate_processes()
function. It was caused when a use_backend rule was declared with a dynamic
name, using a log-format string. The backend is not resolved during the
configuration, which lead to the segfault.
The patch prevents the process binding propagation for such dynamic rules, it
should also be backported to 1.5.
propagate_processes() must not be called with unresolved proxies, but
nothing prevents it from being called in check_config_validity(). The
resulting effect is that an unresolved proxy can cause a recursion
loop if called in such a situation, ending with a segfault after the
fatal error report. There's no side effect beyond this.
This patch refrains from calling the function when any error was met.
This bug also affects 1.5, it should be backported.
If a frontend has any tcp-request content rule relying on request contents
without any inspect delay, we now emit a warning as this will randomly match.
This can be backported to 1.5 as it reduces the support effort.
A config where a tcp-request rule appears after an http-request rule
might seem valid but it is not. So let's report a warning about this
since this case is hard to detect by the naked eye.
Some users want to have a stats frontend with one line per process, but while
100% valid and safe, the config parser emits a warning. Relax this check to
ensure that the warning is only emitted if at least one of the listeners is
bound to multiple processes, or if the directive is placed in a backend called
from multiple processes (since in this case we don't know if it's safe).
This is a continuation of previous patch, the listener's maxaccept is divided
by the number of processes, so it's best if we can swap the two blocks so that
the number of processes is already known when computing the maxaccept value.
When a frontend does not have any bind-process directive, make it
automatically bind to the union of all of its listeners' processes
instead of binding to all processes. That will make it possible to
have the expected behaviour without having to explicitly specify a
bind-process directive.
Note that if the listeners are not bound to a specific process, the
default is still to bind to all processes.
This change could be backported to 1.5 as it simplifies process
management, and was planned to be done during the 1.5 development phase.
We now recursively propagate the bind-process values between frontends
and backends instead of doing it during name resolving. This ensures
that we're able to properly propagate all the bind-process directives
even across "listen" instances, which are not perfectly covered at the
moment, depending on the declaration order.
This basically reverts 3507d5d ("MEDIUM: proxy: only adjust the backend's
bind-process when already set"). It was needed during the transition to
the new process binding method but is causing trouble now because frontend
to backend binding is not properly propagated.
This fix should be backported to 1.5.
When an unknown encryption algorithm is used in userlists or the password is
not pasted correctly in the configuration, http authentication silently fails.
An initial check is now performed during the configuration parsing, in order to
verify that the encrypted password is supported. An unsupported password will
fail with a fatal error.
This patch should be backported to 1.4 and 1.5.
Add support for http-request track-sc, similar to what is done in
tcp-request for backends. A new act_prm field was added to HTTP
request rules to store the track params (table, counter). Just
like for TCP rules, the table is resolved while checking for
config validity. The code was mostly copied from the TCP code
with the exception that here we also count the HTTP request count
and rate by hand. Probably that something could be factored out in
the future.
It seems like tracking flags should be improved to mark each hook
which tracks a key so that we can have some check points where to
increase counters of the past if not done yet, a bit like is done
for TRACK_BACKEND.
With all the goodies supported by logformat, people find that the limit
of 1024 chars for log lines is too short. Some servers do not support
larger lines and can simply drop them, so changing the default value is
not always the best choice.
This patch takes a different approach. Log line length is specified per
log server on the "log" line, with a value between 80 and 65535. That
way it's possibly to satisfy all needs, even with some fat local servers
and small remote ones.
This patch remove all references of standard regex in haproxy. The last
remaining references are only in the regex.[ch] files.
In the file src/checks.c, the original function uses a "pmatch" array.
In fact this array is unused. This patch remove it.
Similar to previous patches, HTTP header captures are performed when
a TCP frontend switches to an HTTP backend, but are not possible to
report. So let's relax the check to explicitly allow them to be present
in TCP frontends.
When no static DH parameters are specified, this patch makes haproxy
use standardized (rfc 2409 / rfc 3526) DH parameters with prime lenghts
of 1024, 2048, 4096 or 8192 bits for DHE key exchange. The size of the
temporary/ephemeral DH key is computed as the minimum of the RSA/DSA server
key size and the value of a new option named tune.ssl.default-dh-param.
MySQL will in stop supporting pre-4.1 authentication packets in the future
and is already giving us a hard time regarding non-silencable warnings
which are logged on each health check. Warnings look like the following:
"[Warning] Client failed to provide its character set. 'latin1' will be used
as client character set."
This patch adds basic support for post-4.1 authentication by sending the proper
authentication packet with the character set, along with the QUIT command.
Now that it is possible to know whether a server is in forced maintenance
or inherits its maintenance status from another one, it is possible to
allow server tracking at more than one level. We still provide a loop
detection however.
Note that for the stats it's a bit trickier since we have to report the
check state which corresponds to the state of the server at the end of
the chain.
This change now involves a new flag SRV_ADMF_IMAINT to note that the
maintenance status of a server is inherited from another server. Thus,
we know at each server level in the chain if it's running, in forced
maintenance or in a maintenance status because it tracks another server,
or even in both states.
Disabling a server propagates this flag down to other servers. Enabling
a server flushes the flag down. A server becomes up again once both of
its flags are cleared.
Two new functions "srv_adm_set_maint()" and "srv_adm_set_ready()" are used to
manipulate this maintenance status. They're used by the CLI and the stats
page.
Now the stats page always says "MAINT" instead of "MAINT(via)" and it's
only the chk/down field which reports "via x/y" when the status is
inherited from another server, but it doesn't say it when a server was
forced into maintenance. The CSV output indicates "MAINT (via x/y)"
instead of only "MAINT(via)". This is the most accurate representation.
One important thing is that now entering/leaving maintenance for a
tracking server correctly follows the state of the tracked server.
Servers used to have 3 flags to store a state, now they have 4 states
instead. This avoids lots of confusion for the 4 remaining undefined
states.
The encoding from the previous to the new states can be represented
this way :
SRV_STF_RUNNING
| SRV_STF_GOINGDOWN
| | SRV_STF_WARMINGUP
| | |
0 x x SRV_ST_STOPPED
1 0 0 SRV_ST_RUNNING
1 0 1 SRV_ST_STARTING
1 1 x SRV_ST_STOPPING
Note that the case where all bits were set used to exist and was randomly
dealt with. For example, the task was not stopped, the throttle value was
still updated and reported in the stats and in the http_server_state header.
It was the same if the server was stopped by the agent or for maintenance.
It's worth noting that the internal function names are still quite confusing.
Now we introduce srv->admin and srv->prev_admin which are bitfields
containing one bit per source of administrative status (maintenance only
for now). For the sake of backwards compatibility we implement a single
source (ADMF_FMAINT) but the code already checks any source (ADMF_MAINT)
where the STF_MAINTAIN bit was previously checked. This will later allow
us to add ADMF_IMAINT for maintenance mode inherited from tracked servers.
Along doing these changes, it appeared that some places will need to be
revisited when implementing the inherited bit, this concerns all those
modifying the ADMF_FMAINT bit (enable/disable actions on the CLI or stats
page), and the checks to report "via" on the stats page. But currently
the code is harmless.
Till now, the server's state and flags were all saved as a single bit
field. It causes some difficulties because we'd like to have an enum
for the state and separate flags.
This commit starts by splitting them in two distinct fields. The first
one is srv->state (with its counter-part srv->prev_state) which are now
enums, but which still contain bits (SRV_STF_*).
The flags now lie in their own field (srv->flags).
The function srv_is_usable() was updated to use the enum as input, since
it already used to deal only with the state.
Note that currently, the maintenance mode is still in the state for
simplicity, but it must move as well.
Thomas Heil reported that previous commit 07fcaaa ("MINOR: fix a few
memory usage errors") make haproxy crash when req* rules are used. As
diagnosed by Cyril Bont, this commit introduced a regression which
makes haproxy free the memory areas allocated for regex even when
they're going to be used, resulting in the crashes.
This patch does three things :
- undo the free() on the valid path
- add regfree() on the error path but only when regcomp() succeeds
- rename err_code to ret_code to avoid confusing the valid return
path with an error path.
John-Paul Bader reported a stupid regression in 1.5-dev25, we
forget to check that global.stats_fe is initialized before visiting
its sockets, resulting in a crash.
No backport is needed.
We used to have is_addr() in place to validate sometimes the existence
of an address, sometimes a valid IPv4 or IPv6 address. Replace them
carefully so that is_inet_addr() is used wherever we can only use an
IPv4/IPv6 address.
Till now a warning was emitted if the "stats bind-process" was not
specified when nbproc was greater than 1. Now we can be much finer
and only emit a warning when at least of the stats socket is bound
to more than one process at a time.
When a process list is specified on either the proxy or the bind lines,
the latter is refined to the intersection of the two. A warning is emitted
if no intersection is found, and the situation is fixed by either falling
back to the first process of the proxy or to all processes.
When a bind-process setting is present in a frontend or backend, we
now verify that the specified process range at least shares one common
process with those defined globally by nbproc. Then if the value is
set, it is reduced to the one enforced by nbproc.
A warning is emitted if process count does not match, and the fix is
done the following way :
- if a single process was specified in the range, it's remapped to
process #1
- if more than one process was specified, the binding is removed
and all processes are usable.
Note that since backends may inherit their settings from frontends,
depending on the declaration order, they may or may not be reported
as warnings.
Some consistency checks cannot be performed between frontends, backends
and peers at the moment because there is no way to check for intersection
between processes bound to some processes when the number of processes is
higher than the number of bits in a word.
So first, let's limit the number of processes to the machine's word size.
This means nbproc will be limited to 32 on 32-bit machines and 64 on 64-bit
machines. This is far more than enough considering that configs rarely go
above 16 processes due to scalability and management issues, so 32 or 64
should be fine.
This way we'll ensure we can always build a mask of all the processes a
section is bound to.
By default, a proxy's bind_proc is zero, meaning "bind to all processes".
It's only when not zero that its process list is restricted. So we don't
want the frontends to enforce the value on the backends when the backends
are still set to zero.
Now, haproxy exit an error saying:
Unable to initialize the lock for the shared SSL session cache. You can retry using
the global statement 'tune.ssl.force-private-cache' but it could increase the CPU
usage due to renegotiation if nbproc > 1.
Process shared mutex seems not supported on some OSs (FreeBSD).
This patch checks errors on mutex lock init to fallback
on a private session cache (per process cache) in error cases.
Commit fc6c032 ("MEDIUM: global: add support for CPU binding on Linux ("cpu-map")")
merged into 1.5-dev13 involves a useless test that clang reports as a warning. The
"low" variable cannot be negative here. Issue reported by Charles Carter.
The "block" rules are redundant with http-request rules because they
are performed immediately before and do exactly the same thing as
"http-request deny". Moreover, this duplication has led to a few
minor stats accounting issues fixed lately.
Instead of keeping the two rule sets, we now build a list of "block"
rules that we compile as "http-request block" and that we later insert
at the beginning of the "http-request" rules.
The only user-visible change is that in case of a parsing error, the
config parser will now report "http-request block rule" instead of
"blocking condition".
Finn Arne Gangstad suggested that we should have the ability to break
keep-alive when the target server has reached its maxconn and that a
number of connections are present in the queue. After some discussion
around his proposed patch, the following solution was suggested : have
a per-proxy setting to fix a limit to the number of queued connections
on a server after which we break keep-alive. This ensures that even in
high latency networks where keep-alive is beneficial, we try to find a
different server.
This patch is partially based on his original proposal and implements
this configurable threshold.
In version 1.3.4, we got the ability to split configuration parts between
frontends and backends. The stats was attached to the backend and a control
was made to ensure that it was used only in a listen or backend section, but
not in a frontend.
The documentation clearly says that the statement may only be used in the
backend.
But since that same version above, the defaults stats configuration is
only filled in the frontend part of the proxy and not in the backend's.
So a backend will not get stats which are enabled in a defaults section,
despite what the doc says. However, a frontend configured after a defaults
section will get stats and will not emit the warning!
There were many technical limitations in 1.3.4 making it impossible to
have the stats working both in the frontend and backend, but now this has
become a total mess.
It's common however to see people create a frontend with a perfectly
working stats configuration which only emits a warning stating that it
might not work, adding to the confusion. Most people workaround the tricky
behaviour by declaring a "listen" section with no server, which was the
recommended solution in 1.3 where it was even suggested to add a dispatch
address to avoid a warning.
So the right solution seems to do the following :
- ensure that the defaults section's settings apply to the backends,
as documented ;
- let the frontends work in order not to break existing setups relying
on the defaults section ;
- officially allow stats to be declared in frontends and remove the
warninng
This patch should probably not be backported since it's not certain that
1.4 is fully compatible with having stats in frontends and backends (which
was really made possible thanks to applets).
Till now there was no check against misplaced use-server rules, and
no warning was emitted, adding to the confusion. They're processed
just after the use_backend rules, or more exactly at the same level
but for the backend.
Recently, the http-request ruleset started to be used a lot and some
bug reports were caused by misplaced http-request rules because there
was no warning if they're after a redirect or use_backend rule. Let's
fix this now. http-request rules are just after the block rules.
Since it became possible to use log-format expressions in use_backend,
having a mandatory condition becomes annoying because configurations
are full of "if TRUE". Let's relax the check to accept no condition
like many other keywords (eg: redirect).
When compiled with USE_GETADDRINFO, make sure we use getaddrinfo(3) to
perform name lookups. On default dual-stack setups this will change the
behavior of using IPv6 first. Global configuration option
'nogetaddrinfo' can be used to revert to deprecated gethostbyname(3).
A few occurrences of sprintf() were causing harmless warnings on OpenBSD :
src/cfgparse.o(.text+0x259e): In function `cfg_parse_global':
src/cfgparse.c:1044: warning: sprintf() is often misused, please use snprintf()
These ones were easy to get rid of, so better do it.
The cfgparse.c file becomes huge, and a large part of it comes from the
server keyword parser. Since the configuration is a bit more modular now,
move this parser to server.c.
This patch also moves the check of the "server" keyword earlier in the
supported keywords list, resulting in a slightly faster config parsing
for configs with large numbers of servers (about 10%).
No functional change was made, only the code was moved.
We have a use case where we look up a customer ID in an HTTP header
and direct it to the corresponding server. This can easily be done
using ACLs and use_backend rules, but the configuration becomes
painful to maintain when the number of customers grows to a few
tens or even a several hundreds.
We realized it would be nice if we could make the use_backend
resolve its name at run time instead of config parsing time, and
use a similar expression as http-request add-header to decide on
the proper backend to use. This permits the use of prefixes or
even complex names in backend expressions. If no name matches,
then the default backend is used. Doing so allowed us to get rid
of all the use_backend rules.
Since there are some config checks on the use_backend rules to see
if the referenced backend exists, we want to keep them to detect
config errors in normal config. So this patch does not modify the
default behaviour and proceeds this way :
- if the backend name in the use_backend directive parses as a log
format rule, it's used as-is and is resolved at run time ;
- otherwise it's a static name which must be valid at config time.
There was the possibility of doing this with the use-server directive
instead of use_backend, but it seems like use_backend is more suited
to this task, as it can be used for other purposes. For example, it
becomes easy to serve a customer-specific proxy.pac file based on the
customer ID by abusing the errorfile primitive :
use_backend bk_cust_%[hdr(X-Cust-Id)] if { hdr(X-Cust-Id) -m found }
default_backend bk_err_404
backend bk_cust_1
errorfile 200 /etc/haproxy/static/proxy.pac.cust1
Signed-off-by: Bertrand Jacquin <bjacquin@exosec.fr>
This patch permit to register new sections in the haproxy's
configuration file. This run like all the "keyword" registration, it is
used during the haproxy initialization, typically with the
"__attribute__((constructor))" functions.
The function str2net runs DNS resolution if valid ip cannot be parsed.
The DNS function used is the standard function of the libc and it
performs asynchronous request.
The asynchronous request is not compatible with the haproxy
archictecture.
str2net() is used during the runtime throught the "socket".
This patch remove the DNS resolution during the runtime.
This patch remove the limit of 32 groups. It also permit to use standard
"pat_parse_str()" function in place of "pat_parse_strcat()". The
"pat_parse_strcat()" is no longer used and its removed. Before this
patch, the groups are stored in a bitfield, now they are stored in a
list of strings. The matching is slower, but the number of groups is
low and generally the list of allowed groups is short.
The fetch function "smp_fetch_http_auth_grp()" used with the name
"http_auth_group" return valid username. It can be used as string for
displaying the username or with the acl "http_auth_group" for checking
the group of the user.
Maybe the names of the ACL and fetch methods are no longer suitable, but
I keep the current names for conserving the compatibility with existing
configurations.
The function "userlist_postinit()" is created from verification code
stored in the big function "check_config_validity()". The code is
adapted to the new authentication storage system and it is moved in the
"src/auth.c" file. This function is used to check the validity of the
users declared in groups and to check the validity of groups declared
on the "user" entries.
This resolve function is executed before the check of all proxy because
many acl needs solved users and groups.
The binary samples are sometimes copied as is into http headers.
A sample can contain bytes unallowed by the http rfc concerning
header content, for example if it was extracted from binary data.
The resulting http request can thus be invalid.
This issue does not yet happen because haproxy currently (mistakenly)
hex-encodes binary data, so it is not really possible to retrieve
invalid HTTP chars.
The solution consists in hex-encoding all non-printable chars prefixed
by a '%' sign.
No backport is needed since existing code is not affected yet.
cfg_parse_listen() currently checks for duplicated proxy names.
Now that we have a tree for this, we can use it.
The config load time was further reduced by 1.6, which is now
about 4.5 times faster than what it was without the trees.
In fact it was the last CPU-intensive processing involving proxy
names. Now the only remaining point is the automatic fullconn
computation which can be bypassed by having a fullconn in the
defaults section, reducing the load time by another 10x.
Large configurations can take time to parse when thousands of backends
are in use. Let's store all the proxies in trees.
findproxy_mode() has been modified to use the tree for lookups, which
has divided the parsing time by about 2.5. But many lookups are still
present at many places and need to be dealt with.
Disabled backends don't have their symbols resolved. We must not initialize
their peers section since they're not valid and instead still contain the
section's name.
There are other places where such unions are still in use, and other similar
errors might still happen. Ideally we should get rid of all of them in the
quite sensible config stage.
Commits e0d1bfb ("[MINOR] Allow shutdown of sessions when a server
becomes unavailable") and eb2c24a ("MINOR: checks: add on-marked-up
option") mentionned that the directive was supported in default-server
but while it can be stated there, it's ignored because the config value
is not copied from the default server upon creation of a new server.
Moving the statement to the "server" lines works fine though. Thanks
to Baptiste Assmann for reporting and diagnosing this bug.
These features were introduced in 1.5-dev6 and 1.5-dev10 respectively,
so no backport is needed.
Cyril Bont reported that despite commit 0dbbf317 which attempted
to fix the crash when a peers section has no name, we still get a
segfault after the error message when parsing the peers. The reason
is that the returned error code is ERR_FATAL and not ERR_ABORT, so
the parsing continues while the section was not initialized.
This is 1.5-specific, no backport is needed.
The ability to globally override the default client and server cipher
suites has been requested multiple times since the introduction of SSL.
This commit adds two new keywords to the global section for this :
- ssl-default-bind-ciphers
- ssl-default-server-ciphers
It is still possible to preset them at build time by setting the macros
LISTEN_DEFAULT_CIPHERS and CONNECT_DEFAULT_CIPHERS.
The new tune.idletimer value allows one to set a different value for
idle stream detection. The default value remains set to one second.
It is possible to disable it using zero, and to change the default
value at build time using DEFAULT_IDLE_TIMER.
A new tcp-check rule type: connect.
It allows HAProxy to test applications which stand on multiple ports or
multiple applications load-balanced through the same backend.
At the very beginning of haproxy, there was "option httpclose" to make
haproxy add a "Connection: close" header in both directions to invite
both sides to agree on closing the connection. It did not work with some
rare products, so "option forceclose" was added to do the same and actively
close the connection. Then client-side keep-alive was supported, so option
http-server-close was introduced. Now we have keep-alive with a fourth
option, not to mention the implicit tunnel mode.
The connection configuration has become a total mess because all the
options above may be combined together, despite almost everyone thinking
they cancel each other, as judging from the common problem reports on the
mailing list. Unfortunately, re-reading the doc shows that it's not clear
at all that options may be combined, and the opposite seems more obvious
since they're compared. The most common issue is options being set in the
defaults section that are not negated in other sections, but are just
combined when the user expects them to be overloaded. The migration to
keep-alive by default will only make things worse.
So let's start to address the first problem. A transaction can only work in
5 modes today :
- tunnel : haproxy doesn't bother with what follows the first req/resp
- passive close : option http-close
- forced close : option forceclose
- server close : option http-server-close with keep-alive on the client side
- keep-alive : option http-keep-alive, end to end
All 16 combination for each section fall into one of these cases. Same for
the 256 combinations resulting from frontend+backend different modes.
With this patch, we're doing something slightly different, which will not
change anything for users with valid configs, and will only change the
behaviour for users with unsafe configs. The principle is that these options
may not combined anymore, and that the latest one always overrides all the
other ones, including those inherited from the defaults section. The "no
option xxx" statement is still supported to cancel one option and fall back
to the default one. It is mainly needed to ignore defaults sections (eg:
force the tunnel mode). The frontend+backend combinations have not changed.
So for examplen the following configuration used to put the connection
into forceclose :
defaults http
mode http
option httpclose
frontend foo.
option http-server-close
=> http-server-close+httpclose = forceclose before this patch! Now
the frontend's config replaces the defaults config and results in
the more expected http-server-close.
All 25 combinations of the 5 modes in (frontend,backend) have been
successfully tested.
In order to prepare for upcoming changes, a new "option http-tunnel" was
added. It currently only voids all other options, and has the lowest
precedence when mixed with another option in another frontend/backend.
If no CA file specified on a server line, the config parser will show an error.
Adds an cmdline option '-dV' to re-set verify 'none' as global default on
servers side (previous behavior).
Also adds 'ssl-server-verify' global statement to set global default to
'none' or 'required'.
WARNING: this changes the default verify mode from "none" to "required" on
the server side, and it *will* break insecure setups.
Just like the previous commit, we sometimes want to limit the rate of
incoming SSL connections. While it can be done for a frontend, it was
not possible for a whole process, which makes sense when multiple
processes are running on a system to server multiple customers.
The new global "maxsslrate" setting is usable to fix a limit on the
session rate going to the SSL frontends. The limits applies before
the SSL handshake and not after, so that it saves the SSL stack from
expensive key computations that would finally be aborted before being
accounted for.
The same setting may be changed at run time on the CLI using
"set rate-limit ssl-session global".
It's sometimes useful to be able to limit the connection rate on a machine
running many haproxy instances (eg: per customer) but it removes the ability
for that machine to defend itself against a DoS. Thus, better also provide a
limit on the session rate, which does not include the connections rejected by
"tcp-request connection" rules. This permits to have much higher limits on
the connection rate without having to raise the session rate limit to insane
values.
The limit can be changed on the CLI using "set rate-limit sessions global",
or in the global section using "maxsessrate".
A config where multiple servers have the same name in the same backend is
prone to a number of issues : logs are not really exploitable, stats get
really tricky and even harder to change, etc...
In fact, it can be safe to have the same name between multiple servers only
when their respective IDs are known and used. So now we detect this situation
and emit a warning for the first conflict detected per server if any of the
servers uses an automatic ID.
When the load balancing algorithm in use is not deterministic, and a previous
request was sent to a server to which haproxy still holds a connection, it is
sometimes desirable that subsequent requests on a same session go to the same
server as much as possible. Note that this is different from persistence, as
we only indicate a preference which haproxy tries to apply without any form
of warranty. The real use is for keep-alive connections sent to servers. When
this option is used, haproxy will try to reuse the same connection that is
attached to the server instead of rebalancing to another server, causing a
close of the connection. This can make sense for static file servers. It does
not make much sense to use this in combination with hashing algorithms.
This new option enables HTTP keep-alive processing on the connections.
It can be overwritten by http-server-close, httpclose and forceclose.
Right now full-chain keep-alive is not yet implemented, but we need
the option to work on it. The doc will come later.
If a server is disabled in configuration and another one tracks it,
this last one must not inherit the MAINT flag otherwise it needs to
be explicitly enabled afterwards. Just remove this to fix the issue.
Health checks can now be paused. This is the status they get when the
server is put into maintenance mode, which is more logical than relying
on the server's state at some places. It will be needed to allow agent
checks to run when health checks are disabled (currently not possible).
Having the check state partially stored in the server doesn't help.
Some functions such as srv_getinter() rely on the server being checked
to decide what check frequency to use, instead of relying on the check
being configured. So let's get rid of SRV_CHECKED and SRV_AGENT_CHECKED
and only use the check's states instead.
At the moment, health checks and agent checks are tied : no agent
check is emitted if no health check is enabled. Other parameters
are considered in the condition for letting checks run. It will
help us selectively enable checks (agent and regular checks) to be
know whether they're enabled/disabled and configured or not. Now
we can already emit an error when trying to enable an unconfigured
agent.
Server tracking uses the same "tracknext" list for servers tracking
another one and for the servers being tracked. This caused an issue
which was fixed by commit f39c71c ([CRITICAL] fix server state tracking:
it was O(n!) instead of O(n)), consisting in ensuring that a server is
being checked before walking down the list, so that we don't propagate
the up/down information via servers being part of the track chain.
But the root cause is the fact that all servers share the same list.
The correct solution consists in having a list head for the tracked
servers and a list of next tracking servers. This simplifies the
propagation logic, especially for the case where status changes might
be passed to individual servers via the CLI.
Doing so ensures that we're consistent between all the functions in the whole
chain. This is important so that we can extract the argument parsing from this
function.
The function stktable_init() will return 0 if create_pool() returns NULL. Since
the returned value of this function is ignored, HAProxy will crash if the pool
of stick table is NULL and stksess_new() is called to allocate a new stick
session. It is a better choice to check the returned value and make HAProxy exit
with alert message if any error is caught.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
The original codes are indented by spaces and not aligned with the former line.
It should be a convention to indent by tabs in HAProxy.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
This is a generic health check which can be used to match a
banner or send a request and analyse a server response.
It works in a send/expect ways and many exchange can be done between
HAProxy and a server to decide the server status, making HAProxy able to
speak the server's protocol.
It can send arbitrary regular or binary strings and match content as a
regular or binary string or a regex.
Signed-off-by: Baptiste Assmann <bedis9@gmail.com>
Since commit 4a74143 (MEDIUM: Paramatise functions over the check of a
server), the check type is inherited from the current proxy's check type
at the moment where the server is declared instead of when reviewing
server configs. This causes an issue where a health check is disabled
when the server is declared before the checks. In fact the server will
inherit the last known check type declared before the "server" line :
backend foo
# this server is not checked at all
server s1 1.1.1.1:80 check
option tcpchk
# this server is tcp-checked :
server s2 1.1.1.2:80 check
option httpchk
# this server is http-checked :
server s3 1.1.1.3:80 check
The fix consists in assigning the check type during the config review
phase where the config is stable. No backport is nedeed.
We handle "http-request redirect" with a log-format string now, but we
leave "redirect" unaffected.
Note that the control of the special "/" case is move from the runtime
execution to the configuration parsing. If the format rule list is
empty, the build_logline() function does nothing.
When parsing track-sc* actions in tcp-request rules, we now automatically
compute the track-sc identifier number using %d when displaying an error
message. But the ID has become wrong since we introduced sc0, we continue
to report id+1 in error messages causing some confusion.
No backport is needed.
Add a DRAIN sub-state for a server which
will be shown on the stats page instead of UP if
its effective weight is zero.
Also, log if a server enters or leaves the DRAIN state
as the result of an agent check.
Signed-off-by: Simon Horman <horms@verge.net.au>
This is achieved by moving rise and fall from struct server to struct check.
After this move the behaviour of the primary check, server->check is
unchanged. However, the secondary agent check, server->agent now has
independent rise and fall values each of which are set to 1.
The result is that receiving "fail", "stopped" or "down" just once from the
agent will mark the server as down. And receiving a weight just once will
allow the server to be marked up if its primary check is in good health.
This opens up the scope to allow the rise and fall values of the agent
check to be configurable, however this has not been implemented at this
stage.
Signed-off-by: Simon Horman <horms@verge.net.au>
Allow an auxiliary agent check to be run independently of the
regular a regular health check. This is enabled by the agent-check
server setting.
The agent-port, which specifies the TCP port to use for the agent's
connections, is required.
The agent-inter, which specifies the interval between agent checks and
timeout of agent checks, is optional. If not set the value for regular
checks is used.
e.g.
server web1_1 127.0.0.1:80 check agent-port 10000
If either the health or agent check determines that a server is down
then it is marked as being down, otherwise it is marked as being up.
An agent health check performed by opening a TCP socket and reading an
ASCII string. The string should have one of the following forms:
* An ASCII representation of an positive integer percentage.
e.g. "75%"
Values in this format will set the weight proportional to the initial
weight of a server as configured when haproxy starts.
* The string "drain".
This will cause the weight of a server to be set to 0, and thus it
will not accept any new connections other than those that are
accepted via persistence.
* The string "down", optionally followed by a description string.
Mark the server as down and log the description string as the reason.
* The string "stopped", optionally followed by a description string.
This currently has the same behaviour as "down".
* The string "fail", optionally followed by a description string.
This currently has the same behaviour as "down".
Signed-off-by: Simon Horman <horms@verge.net.au>
Remove option lb-agent-chk and thus the facility to configure
a stand-alone agent health check. This feature was added by
"MEDIUM: checks: Add agent health check". It will be replaced
by subsequent patches with a features to allow an agent check
to be run as either a secondary check, along with any of the existing
checks, or as part of an http check with the status returned
in an HTTP header.
This patch does not entirely revert "MEDIUM: checks: Add agent health
check". The infrastructure it provides to parse the results of an
agent health check remains and will be re-used by the planned features
that are mentioned above.
Signed-off-by: Simon Horman <horms@verge.net.au>
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
Signed-off-by: Simon Horman <horms@verge.net.au>
Paramatise the following functions over the check of a server
* set_server_down
* set_server_up
* srv_getinter
* server_status_printf
* set_server_check_status
* set_server_disabled
* set_server_enabled
Generally the server parameter of these functions has been removed.
Where it is still needed it is obtained using check->server.
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
By paramatising these functions they may act on each of the checks
without further significant modification.
Explanation of the SSP_O_HCHK portion of this change:
* Prior to this patch SSP_O_HCHK serves a single purpose which
is to tell server_status_printf() weather it should print
the details of the check of a server or not.
With the paramatisation that this patch adds there are two cases.
1) Printing the details of the check in which case a
valid check parameter is needed.
2) Not printing the details of the check in which case
the contents check parameter are unused.
In case 1) we could pass SSP_O_HCHK and a valid check and;
In case 2) we could pass !SSP_O_HCHK and any value for check
including NULL.
If NULL is used for case 2) then SSP_O_HCHK becomes supurfulous
and as NULL is used for case 2) SSP_O_HCHK has been removed.
Signed-off-by: Simon Horman <horms@verge.net.au>
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
The split has been made by:
* Moving elements of struct server's check element that will
be shared by both checks into a new check_common element
of struct server.
* Moving the remaining elements to a new struct check and
making struct server's check element a struct check.
* Adding a server element to struct check, a back-pointer
to the server element it is a member of.
- At this time the server could be obtained using
container_of, however, this will not be so easy
once a second struct check element is added to struct server
to accommodate an agent health check.
Signed-off-by: Simon Horman <horms@verge.net.au>
This function was designed for haproxy while testing other functions
in the past. Initially it was not planned to be used given the not
very interesting numbers it showed on real URL data : it is not as
smooth as the other ones. But later tests showed that the other ones
are extremely sensible to the server count and the type of input data,
especially DJB2 which must not be used on numeric input. So in fact
this function is still a generally average performer and it can make
sense to merge it in the end, as it can provide an alternative to
sdbm+avalanche or djb2+avalanche for consistent hashing or when hashing
on numeric data such as a source IP address or a visitor identifier in
a URL parameter.
Summary:
Avalanche is supported not as a native hashing choice, but a modifier
on the hashing function. Note that this means that possible configs
written after 1.5-dev4 using "hash-type avalanche" will get an informative
error instead. But as discussed on the mailing list it seems nobody ever
used it anyway, so let's fix it before the final 1.5 release.
The default values were selected for backward compatibility with previous
releases, as discussed on the mailing list, which means that the consistent
hashing will still apply the avalanche hash by default when no explicit
algorithm is specified.
Examples
(default) hash-type map-based
Map based hashing using sdbm without avalanche
(default) hash-type consistent
Consistent hashing using sdbm with avalanche
Additional Examples:
(a) hash-type map-based sdbm
Same as default for map-based above
(b) hash-type map-based sdbm avalanche
Map based hashing using sdbm with avalanche
(c) hash-type map-based djb2
Map based hashing using djb2 without avalanche
(d) hash-type map-based djb2 avalanche
Map based hashing using djb2 with avalanche
(e) hash-type consistent sdbm avalanche
Same as default for consistent above
(f) hash-type consistent sdbm
Consistent hashing using sdbm without avalanche
(g) hash-type consistent djb2
Consistent hashing using djb2 without avalanche
(h) hash-type consistent djb2 avalanche
Consistent hashing using djb2 with avalanche
Summary:
In testing at tumblr, we found that using djb2 hashing instead of the
default sdbm hashing resulted is better workload distribution to our backends.
This commit implements a change, that allows the user to specify the hash
function they want to use. It does not limit itself to consistent hashing
scenarios.
The supported hash functions are sdbm (default), and djb2.
For a discussion of the feature and analysis, see mailing list thread
"Consistent hashing alternative to sdbm" :
http://marc.info/?l=haproxy&m=138213693909219
Note: This change does NOT make changes to new features, for instance,
applying an avalance hashing always being performed before applying
consistent hashing.
Mathew Levett reported an issue which is a bit nasty and hard to track
down. RDP cookies contain both the IP and the port, and haproxy matches
them exactly. So if a server has no port specified (or a remapped port),
it will never match a port specified in a cookie. Better warn the user
when this is detected.
In preparation of more flexibility in the stick counters, make their
number configurable. It still defaults to 3 which is the minimum
accepted value. Changing the value alone is not sufficient to get
more counters, some bitfields still need to be updated and the TCP
actions need to be updated as well, but this update tries to be
easier, which is nice for experimentation purposes.
The max weight of server is 256 now, but SRV_UWGHT_MAX is still 255. As a result,
FWRR will not work well when server's weight is 256. The description is as below:
There are some macros related to server's weight in include/types/server.h:
#define SRV_UWGHT_RANGE 256
#define SRV_UWGHT_MAX (SRV_UWGHT_RANGE - 1)
#define SRV_EWGHT_MAX (SRV_UWGHT_MAX * BE_WEIGHT_SCALE)
Since weight of server can be reach to 256 and BE_WEIGHT_SCALE equals to 16,
the max eweight of server should be 256*16 = 4096, it will exceed SRV_EWGHT_MAX
which equals to SRV_UWGHT_MAX*BE_WEIGHT_SCALE = 255*16 = 4080. When a server
with weight 256 is insterted into FWRR tree during initialization, the key value
of this server should be SRV_EWGHT_MAX - s->eweight = 4080 - 4096 = -16 which
is closed to UINT_MAX in unsigned type, so the server with highest weight will
be not elected as the first server to process request.
In addition, it is a better choice to compare with SRV_UWGHT_MAX than a magic
number 256 while doing check for the weight. The max number of servers for
round-robin algorithm is also updated.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
It was a bit inconsistent to have gpc start at 0 and sc start at 1,
so make sc start at zero like gpc. No previous release was issued
with sc3 anyway, so no existing setup should be affected.
Some actions were clearly missing to process response headers. This
patch adds a new "http-response" ruleset which provides the following
actions :
- allow : stop evaluating http-response rules
- deny : stop and reject the response with a 502
- add-header : add a header in log-format mode
- set-header : set a header in log-format mode
We're often missin a third counter to track base, src and base+src at
the same time. Here we introduce track_sc3 to have this third counter.
It would be wise not to add much more counters because that slightly
increases the session size and processing time though the real issue
is more the declaration of the keywords in the code and in the doc.
By properly affecting the flags and values, it becomes easier to add
more tracked counters, for example for experimentation. It also slightly
reduces the code and the number of tests. No counters were added with
this patch.
This patch does not change the logic of the code, it only changes the
way OS-specific defines are tested.
At the moment the transparent proxy code heavily depends on Linux-specific
defines. This first patch introduces a new define "CONFIG_HAP_TRANSPARENT"
which is set every time the defines used by transparent proxy are present.
This also means that with an up-to-date libc, it should not be necessary
anymore to force CONFIG_HAP_LINUX_TPROXY during the build, as the flags
will automatically be detected.
The CTTPROXY flags still remain separate because this older API doesn't
work the same way.
A new line has been added in the version output for haproxy -vv to indicate
what transparent proxy support is available.
Source function will not work with the following line in default section:
source 0.0.0.0 usesrc clientip
even that related settings by iptables and ip rule have been set correctly.
But it can work well in backend setcion.
The reason is that the operation in line 1815 in cfgparse.c as below:
curproxy->conn_src.opts = defproxy.conn_src.opts & ~CO_SRC_TPROXY_MASK;
clears three low bits of conn_src.opts which stores the configuration of
'usesrc'. Without correct bits set, the source address function can not
work well. They should be copied to the backend proxy without being modified.
Since conn_src.tproxy_addr had not copied from defproxy to backend proxy
while initializing backend proxy, source function will not work well
with explicit source address set in default section either.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
Note: the bug was introduced in 1.5-dev16 with commit ef9a3605
Commit a4312fa2 merged into dev18 improved log-format management by
processing "log-format" and "unique-id-format" where they were declared,
so that the faulty args could be reported with their correct line numbers.
Unfortunately, the log-format parser considers the proxy mode (TCP/HTTP)
and now if the directive is set before the "mode" statement, it can be
rejected and report warnings.
So we really need to parse these directives at the end of a section at
least. Right now we do not have an "end of section" event, so we need
to store the file name and line number for each of these directives,
and take care of them at the end.
One of the benefits is that now the line numbers can be inherited from
the line passing "option httplog" even if it's in a defaults section.
Future improvements should be performed to report line numbers in every
log-format processed by the parser.
While ACL args were resolved after all the config was parsed, it was not the
case with sample fetch args because they're almost everywhere now.
The issue is that ACLs now solely rely on sample fetches, so their args
resolving doesn't work anymore. And many fetches involving a server, a
proxy or a userlist don't work at all.
The real issue is that at the bottom layers we have no information about
proxies, line numbers, even ACLs in order to report understandable errors,
and that at the top layers we have no visibility over the locations where
fetches are referenced (think log node).
After failing multiple unsatisfying solutions attempts, we now have a new
concept of args list. The principle is that every proxy has a list head
which contains a number of indications such as the config keyword, the
context where it's used, the file and line number, etc... and a list of
arguments. This list head is of the same type as the elements, so it
serves as a template for adding new elements. This way, it is filled from
top to bottom by the callers with the information they have (eg: line
numbers, ACL name, ...) and the lower layers just have to duplicate it and
add an element when they face an argument they cannot resolve yet.
Then at the end of the configuration parsing, a loop passes over each
proxy's list and resolves all the args in sequence. And this way there is
all necessary information to report verbose errors.
The first immediate benefit is that for the first time we got very precise
location of issues (arg number in a keyword in its context, ...). Second,
in order to do this we had to parse log-format and unique-id-format a bit
earlier, so that was a great opportunity for doing so when the directives
are encountered (unless it's a default section). This way, the recorded
line numbers for these args are the ones of the place where the log format
is declared, not the end of the file.
Userlists report slightly more information now. They're the only remaining
ones in the ACL resolving function.
The acl_expr struct used to hold a pointer to the ACL keyword. But since
we now have all the relevant pointers, we don't need that anymore, we just
need the pointer to the keyword as a string in order to return warnings
and error messages.
So let's change this in order to remove the dependency on the acl_keyword
struct from acl_expr.
During this change, acl_cond_kw_conflicts() used to return a pointer to an
ACL keyword but had to be changed to return a const char* for the same reason.
The ACLs now use the fetch's ->use and ->val to decide upon compatibility
between the place where they are used and where the information are fetched.
The code is capable of reporting warnings about very fine incompatibilities
between certain fetches and an exact usage location, so it is expected that
some new warnings will be emitted on some existing configurations.
Two degrees of detection are provided :
- detecting ACLs that never match
- detecting keywords that are ignored
All tests show that this seems to work well, though bugs are still possible.
Proxy's acl_requires was a copy of all bits taken from ACLs, but we'll
get rid of ACL flags and only rely on sample fetches soon. The proxy's
acl_requires was only used to allocate an HTTP context when needed, and
was even forced in HTTP mode. So better have a flag which exactly says
what it's supposed to be used for.
If a log-format involves some sample fetches that may not be present at
the logging instant, we can now report a warning.
Note that this is done both for log-format and for add-header and carefully
respects the original fetch keyword's capabilities.
Samples fetches were relying on two flags SMP_CAP_REQ/SMP_CAP_RES to describe
whether they were compatible with requests rules or with response rules. This
was never reliable because we need a finer granularity (eg: an HTTP request
method needs to parse an HTTP request, and is available past this point).
Some fetches are also dependant on the context (eg: "hdr" uses request or
response depending where it's involved, causing some abiguity).
In order to solve this, we need to precisely indicate in fetches what they
use, and their users will have to compare with what they have.
So now we have a bunch of bits indicating where the sample is fetched in the
processing chain, with a few variants indicating for some of them if it is
permanent or volatile (eg: an HTTP status is stored into the transaction so
it is permanent, despite being caught in the response contents).
The fetches also have a second mask indicating their validity domain. This one
is computed from a conversion table at registration time, so there is no need
for doing it by hand. This validity domain consists in a bitmask with one bit
set for each usage point in the processing chain. Some provisions were made
for upcoming controls such as connection-based TCP rules which apply on top of
the connection layer but before instantiating the session.
Then everywhere a fetch is used, the bit for the control point is checked in
the fetch's validity domain, and it becomes possible to finely ensure that a
fetch will work or not.
Note that we need these two separate bitfields because some fetches are usable
both in request and response (eg: "hdr", "payload"). So the keyword will have
a "use" field made of a combination of several SMP_USE_* values, which will be
converted into a wider list of SMP_VAL_* flags.
The knowledge of permanent vs dynamic information has disappeared for now, as
it was never used. Later we'll probably reintroduce it differently when
dealing with variables. Its only use at the moment could have been to avoid
caching a dynamic rate measurement, but nothing is cached as of now.
The check was made on "cond" instead of "rule->cond", so it never
emitted any warning since either the rule was NULL or it was set to
the last condition met.
This is 1.5-specific and the bug was introduced by commit 4baae248
in 1.5-dev17, so no backport is needed.
Using the address syntax "fd@<num>", a listener may inherit a file
descriptor that the caller process has already bound and passed as
this number. The fd's socket family is detected using getsockname(),
and the usual initialization is performed through the existing code
for that family, but the socket creation is skipped.
Whether the parent has performed the listen() call or not is not
important as this is detected.
For UNIX sockets, we immediately clear the path after preparing a
socket so that we never remove it in case an abort would happen due
to a late error during startup.
This change allows one to force the address family in any address parsed
by str2sa_range() by specifying it as a prefix followed by '@' then the
address. Currently supported address prefixes are 'ipv4@', 'ipv6@', 'unix@'.
This also helps forcing resolving for host names (when getaddrinfo is used),
and force the family of the empty address (eg: 'ipv4@' = 0.0.0.0 while
'ipv6@' = ::).
The main benefits is that unix sockets can now get a local name without
being forced to begin with a slash. This is useful during development as
it is no longer necessary to have stats socket sent to /tmp.
Several of the parsing functions made use of multiple errmsg/err_msg
variables which had to be freed, while there is already one in each
function that is freed upon exit. Adapt the code to use the existing
variable exclusively.
The 'source' and 'usesrc' statements now completely rely on str2sa_range() to
parse an address. A test is made to ensure that the address family supports
connect().
Now that str2sa_range() knows how to parse UNIX addresses, make str2listener()
use it. It simplifies the function. Next step consists in unifying the error
handling to further simplify the call.
Tests have been done and show that unix sockets are correctly handled, with
and without prefixes, both for global stats and normal "bind" statements.
We'll need str2sa_range() to support a prefix for unix sockets. Since
we don't always want to use it (eg: stats socket), let's not take it
unconditionally from global but let the caller pass it.
The "unix-bind prefix" feature was made for explicit "bind" statements. Since
the stats socket was changed to use str2listener(), it implicitly inherited
from this feature. But both are defined in the global section, and we don't
want them to be position-dependant.
So let's make str2listener() explicitly not apply the unix-bind prefix to the
global stats frontend.
This only affects 1.5-dev so it does not need any backport.
Add new tunable "tune.ssl.maxrecord".
Over SSL/TLS, the client can decipher the data only once it has received
a full record. With large records, it means that clients might have to
download up to 16kB of data before starting to process them. Limiting the
record size can improve page load times on browsers located over high
latency or low bandwidth networks. It is suggested to find optimal values
which fit into 1 or 2 TCP segments (generally 1448 bytes over Ethernet
with TCP timestamps enabled, or 1460 when timestamps are disabled), keeping
in mind that SSL/TLS add some overhead. Typical values of 1419 and 2859
gave good results during tests. Use "strace -e trace=write" to find the
best value.
This trick was first suggested by Mike Belshe :
http://www.belshe.com/2010/12/17/performance-and-the-tls-record-size/
Then requested again by Ilya Grigorik who provides some hints here :
http://ofps.oreilly.com/titles/9781449344764/_transport_layer_security_tls.html#ch04_00000101
When parsing the config, we now use str2sa_range() to detect when
ranges or port offsets were improperly used. Among the new checks
are "log", "source", "addr", "usesrc" which previously didn't check
for extra parameters.
Support a agent health check performed by opening a TCP socket to a
pre-defined port and reading an ASCII string. The string should have one of
the following forms:
* An ASCII representation of an positive integer percentage.
e.g. "75%"
Values in this format will set the weight proportional to the initial
weight of a server as configured when haproxy starts.
* The string "drain".
This will cause the weight of a server to be set to 0, and thus it will
not accept any new connections other than those that are accepted via
persistence.
* The string "down", optionally followed by a description string.
Mark the server as down and log the description string as the reason.
* The string "stopped", optionally followed by a description string.
This currently has the same behaviour as down (iii).
* The string "fail", optionally followed by a description string.
This currently has the same behaviour as down (iii).
A agent health check may be configured using "option lb-agent-chk".
The use of an alternate check-port, used to obtain agent heath check
information described above as opposed to the port of the service,
may be useful in conjunction with this option.
e.g.
option lb-agent-chk
server http1_1 10.0.0.10:80 check port 10000 weight 100
Signed-off-by: Simon Horman <horms@verge.net.au>
Commit 2b0108ad accidently got rid of the ability to emit a "-" for
empty log fields. This can happen for captured request and response
cookies, as well as for fetches. Since we don't want to have this done
for headers however, we set the default log method when parsing the
format. It is still possible to force the desired mode using +M/-M.
Commit 290e63aa moved the unix parameters out of the global stats socket
to the bind_conf struct. As such the stats admin level was also moved
overthere, but it remained in the stats global section where it was not
used, except by a nasty memcpy() used to initialize the ux struct in the
bind_conf with too large data. Fortunately, the extra data copied were
the previous level over the new level so it did not have any impact, but
it could have been worse.
This bug is 1.5 specific, no backport is needed.
Reported-by: Dinko Korunic <dkorunic@reflected.net>
logsrv->minlvl gets the numeric log level from the equivalent string.
Upon error, ->level was checked due to a wrong copy-paste. The effect
is that a wrong name will silently be ignored and due to minlvl=-1,
will act as if the option was not set.
No backport is needed, this is 1.5-specific.
Reported-by: Dinko Korunic <dkorunic@reflected.net>
An error caused by an invalid port does not cause the raddr string to
be freed. This is harmless at the moment since we exit, but may have
an impact later if we ever support hot config changes.
Reported-by: Dinko Korunic <dkorunic@reflected.net>
If a peers section contains several instances of the local peer name, only
the first one was considered and the next ones were silently ignored. This
can cause some trouble to debug such a configuration. Now the extra entries
are rejected with an error message indicating where the first occurrence was
found.
Due to a typo in the peers section lookup code, the last declared peers
section was used instead of the one matching the requested name. This bug
has been there since the very first commit on peers section (1.5-dev2).
It happens that all of them call parse_logformat_line() which sets
proxy->to_log with a number of flags affecting the line format for
all three users. For example, having a unique-id specified disables
the default log-format since fe->to_log is tested when the session
is established.
Similarly, having "option logasap" will cause "+" to be inserted in
unique-id or headers referencing some of the fields depending on
LW_BYTES.
This patch first removes most of the dependency on fe->to_log whenever
possible. The first possible cleanup is to stop checking fe->to_log
for being null, considering that it always contains at least LW_INIT
when any such usage is made of the log-format!
Also, some checks are wrong. s->logs.logwait cannot be nulled by
"logwait &= ~LW_*" since LW_INIT is always there. This results in
getting the wrong log at the end of a request or session when a
unique-id or add-header is set, because logwait is still not null
but the log-format is not checked.
Further cleanups are required. Most LW_* flags should be removed or at
least replaced with what they really mean (eg: depend on client-side
connection, depend on server-side connection, etc...) and this should
only affect logging, not other mechanisms.
This patch fixes the default log-format and tries to limit interferences
between the log formats, but does not pretend to do more for the moment,
since it's the most visible breakage.
These two new statements allow to pass information extracted from the request
to the server. It's particularly useful for passing SSL information to the
server, but may be used for various other purposes such as combining headers
together to emulate internal variables.
Until now it was only possible to use track-sc1/sc2 with "src" which
is the IPv4 source address. Now we can use track-sc1/sc2 with any fetch
as well as any transformation type. It works just like the "stick"
directive.
Samples are automatically converted to the correct types for the table.
Only "tcp-request content" rules may use L7 information, and such information
must already be present when the tracking is set up. For example it becomes
possible to track the IP address passed in the X-Forwarded-For header.
HTTP request processing now also considers tracking from backend rules
because we want to be able to update the counters even when the request
was already parsed and tracked.
Some more controls need to be performed (eg: samples do not distinguish
between L4 and L6).
Both servers and proxies share a common set of parameters for outgoing
connections, and since they're not stored in a similar structure, a lot
of code is duplicated in the connection setup, which is one sensible
area.
Let's first define a common struct for these settings and make use of it.
Next patches will de-duplicate code.
This change also fixes a build breakage that happens when USE_LINUX_TPROXY
is not set but USE_CTTPROXY is set, which seem to be very unlikely
considering that the issue was introduced almost 2 years ago an never
reported.
Recent commit 16a214 to move the maxaccept parameter to listeners didn't
set it on the peers' listeners, resulting in the value zero being used
there. This caused a busy loop for each peers section, because no incoming
connection could be accepted.
Thanks to Herv Commowick for reporting this issue.
Some users need more than 64 characters to log large cookies. The limit
was set to 63 characters (and not 64 as previously documented). Now it
is possible to change this using the global "tune.http.cookielen" setting
if required.
New option 'maxcompcpuusage' in global section.
Sets the maximum CPU usage HAProxy can reach before stopping the
compression for new requests or decreasing the compression level of
current requests. It works like 'maxcomprate' but with the Idle.
global.tune.maxaccept was used for all listeners. This becomes really not
convenient when some listeners are bound to a single process and other ones
are bound to many processes.
Now we change the principle : we count the number of processes a listener
is bound to, and apply the maxaccept either entirely if there is a single
process, or divided by twice the number of processes in order to maintain
fairness.
The default limit has also been increased from 32 to 64 as it appeared that
on small machines, 32 was too low to achieve high connection rates.
The new "cpu-map" directive allows one to assign the CPU sets that
a process is allowed to bind to. This is useful in combination with
the "nbproc" and "bind-process" directives.
The support is implicit on Linux 2.6.28 and above.
Having nbproc preinitialized to zero is really annoying as it prevents
some checks from being correctly performed. Also the check to prevent
nbproc from being redefined is totally useless, so let's preset it to
1 and remove the test.
Instead of storing a couple of (int, ptr) in the struct connection
and the struct session, we use a different method : we only store a
pointer to an integer which is stored inside the target object and
which contains a unique type identifier. That way, the pointer allows
us to retrieve the object type (by dereferencing it) and the object's
address (by computing the displacement in the target structure). The
NULL pointer always corresponds to OBJ_TYPE_NONE.
This reduces the size of the connection and session structs. It also
simplifies target assignment and compare.
In order to improve the generated code, we try to put the obj_type
element at the beginning of all the structs (listener, server, proxy,
si_applet), so that the original and target pointers are always equal.
A lot of code was touched by massive replaces, but the changes are not
that important.
Now that all pollers make use of speculative I/O, there is no point
having two epoll implementations, so replace epoll with the sepoll code
and remove sepoll which has just become the standard epoll method.
This patch adds input and output rate calcutation on the HTTP compresion
feature.
Compression can be limited with a maximum rate value in kilobytes per
second. The rate is set with the global 'maxcomprate' option. You can
change this value dynamicaly with 'set rate-limit http-compression
global' on the UNIX socket.
With the global maxzlibmem option, you are able ton control the maximum
amount of RAM usable for HTTP compression.
A test is done before each zlib allocation, if the there isn't available
memory, the test fail and so the zlib initialization, so data won't be
compressed.
The window size and the memlevel of the zlib are now configurable using
global options tune.zlib.memlevel and tune.zlib.windowsize.
It affects the memory consumption of the zlib.
The trash is used everywhere to store the results of temporary strings
built out of s(n)printf, or as a storage for a chunk when chunks are
needed.
Using global.tune.bufsize is not the most convenient thing either.
So let's replace trash with a chunk and directly use it as such. We can
then use trash.size as the natural way to get its size, and get rid of
many intermediary chunks that were previously used.
The patch is huge because it touches many areas but it makes the code
a lot more clear and even outlines places where trash was used without
being that obvious.
This commit introduces HTTP compression using the zlib library.
http_response_forward_body has been modified to call the compression
functions.
This feature includes 3 algorithms: identity, gzip and deflate:
* identity: this is mostly for debugging, and it was useful for
developping the compression feature. With Content-Length in input, it
is making each chunk with the data available in the current buffer.
With chunks in input, it is rechunking, the output chunks will be
bigger or smaller depending of the size of the input chunk and the
size of the buffer. Identity does not apply any change on data.
* gzip: same as identity, but applying a gzip compression. The data
are deflated using the Z_NO_FLUSH flag in zlib. When there is no more
data in the input buffer, it flushes the data in the output buffer
(Z_SYNC_FLUSH). At the end of data, when it receives the last chunk in
input, or when there is no more data to read, it writes the end of
data with Z_FINISH and the ending chunk.
* deflate: same as gzip, but with deflate algorithm and zlib format.
Note that this algorithm has ambiguous support on many browsers and
no support at all from recent ones. It is strongly recommended not
to use it for anything else than experimentation.
You can't choose the compression ratio at the moment, it will be set to
Z_BEST_SPEED (1), as tests have shown very little benefit in terms of
compression ration when going above for HTML contents, at the cost of
a massive CPU impact.
Compression will be activated depending of the Accept-Encoding request
header. With identity, it does not take care of that header.
To build HAProxy with zlib support, use USE_ZLIB=1 in the make
parameters.
This work was initially started by David Du Colombier at Exceliance.
Using "stats bind-process", it becomes possible to indicate to haproxy which
process will get the incoming connections to the stats socket. It will also
shut down the warning when nbproc > 1.
All SSL-specific "server" keywords are now processed in ssl_sock.c. At
the moment, there is no more "not implemented" hint when SSL is disabled,
but keywords could be added in server.c if needed.
Baptiste Assmann reported a bug causing a crash on recent versions when
sticking rules were set on layer 7 in a TCP proxy. The bug is easier to
reproduce with the "defer-accept" option on the "bind" line in order to
have some contents to parse when the connection is accepted. The issue
is that the acl_prefetch_http() function called from HTTP fetches relies
on hdr_idx to be preinitialized, which is not the case if there is no L7
ACL.
The solution consists in adding a new SMP_CAP_L7 flag to fetches to indicate
that they are expected to work on L7 data, so that the proxy knows that the
hdr_idx has to be initialized. This is already how ACL and HTTP mode are
handled.
The bug was present since 1.5-dev9.
These ones are used to set the default ciphers suite on "bind" lines and
"server" lines respectively, instead of using OpenSSL's defaults. These
are probably mainly useful for distro packagers.
When health checks are configured on a server which has the send-proxy
directive and no "port" nor "addr" settings, the health check connections
will automatically use the PROXY protocol. If "port" or "addr" are set,
the "check-send-proxy" directive may be used to force the protocol.
With this change, we now use the connection's transport layer to receive
and send data during health checks. It even becomes possible to send data
in multiple times, which was not possible before.
The transport layer used is the same as the one used for the traffic, unless
a specific address and/or port is specified for the checks using "port" or
"addr", in which case the transport layer defaults to raw_sock. An option
will be provided to force SSL checks on different IP/ports later.
Connection errors and timeouts are still reported.
Some situations where strerror() was able to report a precise error after
a failed connect() in the past might not be reported with as much precision
anymore, but the error message was already meaningless. During the tests,
no situation was found where a message became less precise.
Since it's possible for the checks to use a different protocol or transport layer
than the prod traffic, we need to have them referenced in the server. The
SSL checks are not enabled yet, but the transport layers are completely used.
Till now the request was made in the trash and sent to the network at
once, and the response was read into a preallocated char[]. Now we
allocate a full buffer for both the request and the response, and make
use of it.
Some of the operations will probably be replaced later with buffer macros
but the point was to ensure we could migrate to use the data layers soon.
One nice improvement caused by this change is that requests are now formed
at the beginning of the check and may safely be sent in multiple chunks if
needed.
The health checks in the servers are becoming a real mess, move them
into their own subsection. We'll soon need to have a struct buffer to
replace the char * as well as check-specific protocol and transport
layers.
This is a first step, we now use the connection layer without the data
layers (send/recv are still used by hand). The connection is established
using tcp_connect_server() and raw_sock is assumed and forced for now.
fdtab is not manipulated anymore and polling is managed via the connection
layer.
It becomes quite clear that the server needs a second ->ctrl and ->xprt
dedicated to the checks.
While working on the changes required to make the health checks use the
new connections, it started to become obvious that some naming was not
logical at all in the connections. Specifically, it is not logical to
call the "data layer" the layer which is in charge for all the handshake
and which does not yet provide a data layer once established until a
session has allocated all the required buffers.
In fact, it's more a transport layer, which makes much more sense. The
transport layer offers a medium on which data can transit, and it offers
the functions to move these data when the upper layer requests this. And
it is the upper layer which iterates over the transport layer's functions
to move data which should be called the data layer.
The use case where it's obvious is with embryonic sessions : an incoming
SSL connection is accepted. Only the connection is allocated, not the
buffers nor stream interface, etc... The connection handles the SSL
handshake by itself. Once this handshake is complete, we can't use the
data functions because the buffers and stream interface are not there
yet. Hence we have to first call a specific function to complete the
session initialization, after which we'll be able to use the data
functions. This clearly proves that SSL here is only a transport layer
and that the stream interface constitutes the data layer.
A similar change will be performed to rename app_cb => data, but the
two could not be in the same commit for obvious reasons.
Since recent changes on the global frontend, it was not possible anymore
to soft-reload a process which had a stats socket because the socket would
not be disabled upon reload. The only solution to this endless madness is
to have the global frontend part of normal proxies.
Since we don't want to get an ID that shifts all other proxies and causes
trouble in deployed environments, we assign it ID #0 which other proxies
can't grab, and we don't report it in the stats pages.
Each proxy contains a reference to the original config file and line
number where it was declared. The pointer used is just a reference to
the one passed to the function instead of being duplicated. The effect
is that it is not valid anymore at the end of the parsing and that all
proxies will be enumerated as coming from the same file on some late
configuration errors. This may happen for exmaple when reporting SSL
certificate issues.
By copying using strdup(), we avoid this issue.
1.4 has the same issue, though no report of the proxy file name is done
out of the config section. Anyway a backport is recommended to ease
post-mortem analysis.
This allows to easily add/remove "bind" entries to a frontend without
being forced to remove it when the last entry is temporarily removed.
While "disabled" may sometimes work in a frontend, it becomes trickier
on "listen" sections which can also hold servers and be referenced by
other frontends.
Note that a "listen" section with no "bind" is equivalent to a "backend"
section.
Configs without any listeners are still reported as invalid and refuse
to load.
This is because "notlsv1" used to disable TLSv1.0 only and had no effect
on v1.1/v1.2. so better have an option for each version. This applies both
to "bind" and "server" statements.
We don't needa to lock the memory when there is a single process. This can
make a difference on small systems where locking is much more expensive than
just a test.
Add keyword 'verify' on bind:
'verify none': authentication disabled (default)
'verify optional': accept connection without certificate
and process a verify if the client sent a certificate
'verify required': reject connection without certificate
and process a verify if the client send a certificate
Add keyword 'cafile' on bind:
'cafile <path>' path to a client CA file used to verify.
'crlfile <path>' path to a client CRL file used to verify.
Check the protocol pointer and not the socket to report an unknown family
in servers or peers. This can never happen anyway, it's just to be completely
clean.
It's better to set all listeners to ssl_sock when seeing the "ssl"
keyword that to loop on all of them afterwards just for this. This
also removes some #ifdefs.
Unix permissions are per-bind configuration line and not per listener,
so let's concretize this in the way the config is stored. This avoids
some unneeded loops to set permissions on all listeners.
The access level is not part of the unix perms so it has been moved
away. Once we can use str2listener() to set all listener addresses,
we'll have a bind keyword parser for this one.
Navigating through listeners was very inconvenient and error-prone. Not to
mention that listeners were linked in reverse order and reverted afterwards.
In order to definitely get rid of these issues, we now do the following :
- frontends have a dual-linked list of bind_conf
- frontends have a dual-linked list of listeners
- bind_conf have a dual-linked list of listeners
- listeners have a pointer to their bind_conf
This way we can now navigate from anywhere to anywhere and always find the
proper bind_conf for a given listener, as well as find the list of listeners
for a current bind_conf.
Otherwise we would risk a segfault when checking the config's validity
(eg: when looking for conflicts on ID assignments).
Note that the same issue exists with peers_fe and the global stats_fe. All
listeners should be reviewed and simplified to use a compatible declaration
mode.
When an unknown "bind" keyword is detected, dump the list of all
registered keywords. Unsupported default alternatives are also reported
as "not supported".
The "mode", "uid", "gid", "user" and "group" bind options were moved to
proto_uxst as they are unix-specific.
Note that previous versions had a bug here, only the last listener was
updated with the specified settings. However, it almost never happens
that bind lines contain multiple UNIX socket paths so this is not that
much of a problem anyway.
Registering new SSL bind keywords was not particularly handy as it required
many #ifdef in cfgparse.c. Now the code has moved to ssl_sock.c which calls
a register function for all the keywords.
Error reporting was also improved by this move, because the called functions
build an error message using memprintf(), which can span multiple lines if
needed, and each of these errors will be displayed indented in the context of
the bind line being processed. This is important when dealing with certificate
directories which can report multiple errors.
Now proto_tcp.c is responsible for the 4 settings it handles :
- defer-accept
- interface
- mss
- transparent
These ones do not need to be handled in cfgparse anymore. If support for a
setting is disabled by a missing build option, then cfgparse correctly
reports :
[ALERT] 255/232700 (2701) : parsing [echo.cfg:114] : 'bind' : 'transparent' option is not implemented in this version (check build options).
With the arrival of SSL, the "bind" keyword has received even more options,
all of which are processed in cfgparse in a cumbersome way. So it's time to
let modules register their own bind options. This is done very similarly to
the ACLs with a small difference in that we make the difference between an
unknown option and a known, unimplemented option.
Some settings need to be merged per-bind config line and are not necessarily
SSL-specific. It becomes quite inconvenient to have this ssl_conf SSL-specific,
so let's replace it with something more generic.
A side effect of this change is that the "ssl" keyword on "bind" lines is now
just a boolean and that "crt" is needed to designate certificate files or
directories.
Note that much refcounting was needed to have the free() work correctly due to
the number of cert aliases which can make a context be shared by multiple names.
SSL config holds many parameters which are per bind line and not per
listener. Let's use a per-bind line config instead of having it
replicated for each listener.
At the moment we only do this for the SSL part but this should probably
evolved to handle more of the configuration and maybe even the state per
bind line.
This is very convenient to reduce SSL processing priority compared to
other traffic. This applies to CPU usage only, but has a direct impact
on latency under congestion.
SSL connections take a huge amount of memory, and unfortunately openssl
does not check malloc() returns and easily segfaults when too many
connections are used.
The only solution against this is to provide a global maxsslconn setting
to reject SSL connections above the limit in order to avoid reaching
unsafe limits.
With SSL, connections are much more expensive, so it is important to be
able to limit concurrent connections per listener in order to limit the
memory usage.
I wrote a small path to add the SSL_OP_CIPHER_SERVER_PREFERENCE OpenSSL option
to frontend, if the 'prefer-server-ciphers' keyword is set.
Example :
bind 10.11.12.13 ssl /etc/haproxy/ssl/cert.pem ciphers RC4:HIGH:!aNULL:!MD5 prefer-server-ciphers
This option mitigate the effect of the BEAST Attack (as I understand), and it
equivalent to :
- Apache HTTPd SSLHonorCipherOrder option.
- Nginx ssl_prefer_server_ciphers option.
[WT: added a test for the support of the option]
This is aimed at disabling SSLv3 and TLSv1 respectively. SSLv2 is always
disabled. This can be used in some situations where one version looks more
suitable than the other.
Since the SSL handshake involves an immediate reply from the server
to the client, there's no point responding with a quick-ack before
sending the data, so disable quick-ack by default, just as it is done
for HTTP.
This shows a 2-2.5% transaction rate increase on a dual-core atom.
CVE-2009-3555 suggests that client-initiated renegociation should be
prevented in the middle of data. The workaround here consists in having
the SSL layer notify our callback about a handshake occurring, which in
turn causes the connection to be marked in the error state if it was
already considered established (which means if a previous handshake was
completed). The result is that the connection with the client is immediately
aborted and any pending data are dropped.
This option currently takes no option and simply turns SSL on for all
connections going to the server. It is likely that more options will
be needed in the future.
The PROXY protocol is now decoded in the connection before other
handshakes. This means that it may be extracted from a TCP stream
before SSL is decoded from this stream.
Some parts of the sock_ops structure were only used by the stream
interface and have been moved into si_ops. Some of them were callbacks
to the stream interface from the connection and have been moved into
app_cp as they're the application seen from the connection (later,
health-checks will need to use them). The rest has moved to data_ops.
Normally at this point the connection could live without knowing about
stream interfaces at all.
The "raw_sock" prefix will be more convenient for naming functions as
it will be prefixed with the data layer and suffixed with the data
direction. So let's rename the files now to avoid any further confusion.
The #include directive was also removed from a number of files which do
not need it anymore.
The correct spelling is "independent", not "independant". This patch
fixes the doc and the configuration parser to accept the correct form.
The config parser still allows the old naming for backwards compatibility.
This implements the feature discussed in the earlier thread of killing
connections on backup servers when a non-backup server comes back up. For
example, you can use this to route to a mysql master & slave and ensure
clients don't stay on the slave after the master goes from down->up. I've done
some minimal testing and it seems to work.
[WT: added session flag & doc, moved the killing after logging the server UP,
and ensured that the new server is really usable]
httponly This option tells haproxy to add an "HttpOnly" cookie attribute
when a cookie is inserted. This attribute is used so that a
user agent doesn't share the cookie with non-HTTP components.
Please check RFC6265 for more information on this attribute.
secure This option tells haproxy to add a "Secure" cookie attribute when
a cookie is inserted. This attribute is used so that a user agent
never emits this cookie over non-secure channels, which means
that a cookie learned with this flag will be presented only over
SSL/TLS connections. Please check RFC6265 for more information on
this attribute.
This one was already taken care of in proxy_cfg_ensure_no_http(), so if a
cookie is presented in a TCP backend, we got two warnings.
This can be backported to 1.4 since it's been this way for 2 years (although not dramatic).
Cookies were mixed with many other options while they're not used as options.
Move them to a dedicated bitmask (ck_opts). This has released 7 flags in the
proxy options and leaves some room for new proxy flags.
Option httplog needs to be checked only once the proxy has been validated,
so that its final mode (tcp/http) can be used. Also we need to check for
httplog before checking the log format, so that we can report a warning
about this specific option and not about the format it implies.
The listener struct is now aware of the socket layer to use upon accept().
At the moment, only sock_raw is supported so this patch should not change
anything.
Before it was possible to resize the buffers using global.tune.bufsize,
the trash has always been the size of a buffer by design. Unfortunately,
the recent buffer sizing at runtime forgot to adjust the trash, resulting
in it being too short for content rewriting if buffers were enlarged from
the default value.
The bug was encountered in 1.4 so the fix must be backported there.
Tunnel timeouts are used when TCP connections are forwarded, or
when forwarding upgraded HTTP connections (WebSocket) as well as
CONNECT requests to proxies.
This timeout allows long-lived sessions to be supported without
having to set large timeouts to normal requests.
Instead of hard-coding sock_raw in connect_server(), we set this socket
operation at config parsing time. Right now, only servers and peers have
it. Proxies are still hard-coded as sock_raw. This will be needed for
future work on SSL which requires a different socket layer.
All keywords registered using a cfg_kw_list now make use of the new error reporting
framework. This allows easier and more precise error reporting without having to
deal with complex buffer allocation issues.
This is mainly a massive renaming in the code to get it in line with the
calling convention. Next patch will rename a few files to complete this
operation.
All parsing errors were known but impossible to return. Now by making use
of memprintf(), we're able to build meaningful error messages that the
caller can display.
Patterns were using a bitmask to indicate if request or response was desired
in fetch functions and keywords. ACLs were using a bitmask in fetch keywords
and a single bit in fetch functions. ACLs were also using an ACL_PARTIAL bit
in fetch functions indicating that a non-final fetch was performed, which was
an abuse of the existing direction flag.
The change now consists in using :
- a capabilities field for fetch keywords => SMP_CAP_REQ/RES to indicate
if a keyword supports requests, responses, both, etc...
- an option field for fetch functions to indicate what the caller expects
(request/response, final/non-final)
The ACL_PARTIAL bit was reversed to get SMP_OPT_FINAL as it's more explicit
to know we're working on a final buffer than on a non-final one.
ACL_DIR_* were removed, as well as PATTERN_FETCH_*. L4 fetches were improved
to support being called on responses too since they're still available.
The <dir> field of all fetch functions was changed to <opt> which is now
unsigned.
The patch is large but mostly made of cosmetic changes to accomodate this, as
almost no logic change happened.
The Unique ID, is an ID generated with several informations. You can use
a log-format string to customize it, with the "unique-id-format" keyword,
and insert it in the request header, with the "unique-id-header" keyword.
* logformat functions now take a format linked list as argument
* build_logline() build a logline using a format linked list
* rename LOG_* by LOG_FMT_* in enum
* improve error management in build_logline()
Sometimes it is desirable to forward a particular request to a specific
server without having to declare a dedicated backend for this server. This
can be achieved using the "use-server" rules. These rules are evaluated after
the "redirect" rules and before evaluating cookies, and they have precedence
on them. There may be as many "use-server" rules as desired. All of these
rules are evaluated in their declaration order, and the first one which
matches will assign the server.
Merge http_sess_log() and tcp_sess_log() to sess_log() and move it to
log.c
A new field in logformat_type define if you can use a logformat
variable in TCP or HTTP mode.
doc: log-format in tcp mode
Note that due to the way log buffer allocation currently works, trying to
log an HTTP request without "option httplog" is still not possible. This
will change in the near future.
The principle behind this load balancing algorithm was first imagined
and modeled by Steen Larsen then iteratively refined through several
work sessions until it would totally address its original goal.
The purpose of this algorithm is to always use the smallest number of
servers so that extra servers can be powered off during non-intensive
hours. Additional tools may be used to do that work, possibly by
locally monitoring the servers' activity.
The first server with available connection slots receives the connection.
The servers are choosen from the lowest numeric identifier to the highest
(see server parameter "id"), which defaults to the server's position in
the farm. Once a server reaches its maxconn value, the next server is used.
It does not make sense to use this algorithm without setting maxconn. Note
that it can however make sense to use minconn so that servers are not used
at full load before starting new servers, and so that introduction of new
servers requires a progressively increasing load (the number of servers
would more or less follow the square root of the load until maxconn is
reached). This algorithm ignores the server weight, and is more beneficial
to long sessions such as RDP or IMAP than HTTP, though it can be useful
there too.
parse_logformat_string: parse the string, detect the type: text,
separator or variable
parse_logformat_var: dectect variable name
parse_logformat_var_args: parse arguments and flags
add_to_logformat_list: add to the logformat linked list
When checking a configuration file using "-c -f xxx", sometimes it is
reported that a config is valid while it will later fail (eg: no enabled
listener). Instead, let's improve the return values :
- return 0 if config is 100% OK
- return 1 if config has errors
- return 2 if config is OK but no listener nor peer is enabled
If the local host is not found as a peer in a "peers" section, we have a
double free, and possibly a use-after-free because the peers section is
freed since it's aliased as the table's name.
In a config where server "s1" is marked disabled and "s2" tracks "s1",
s2 appears disabled on the stats but is still inserted into the LB farm
because the tracking is resolved too late in the configuration process.
We now resolve tracked servers before building LB maps and we also mark
the tracking server in maintenance mode, which previously was not done,
causing half of the issue.
Last point is that we also protect srv_is_usable() against electing a
server marked for maintenance. This is not absolutely needed but is a
safe choice and makes a lot of sense.
This fix must be backported to 1.4.
New option "http-send-name-header" specifies the name of a header which
will hold the server name in outgoing requests. This is the name of the
server the connection is really sent to, which means that upon redispatches,
the header's value is updated so that it always matches the server's name.
This patch settles the 2 loggers limitation.
Loggers are now stored in linked lists.
Using "global log", the global loggers list content is added at the end
of the current proxy list. Each "log" entries are added at the end of
the proxy list.
"no log" flush a logger list.
Up to now, if a cookie value was specified on a server when the proxy was
in TCP mode, it would cause a fatal error. Now we only report a warning,
since the cookie will be ignored. This makes it easier to generate configs
from scripts.
When reading the code, the "tracked" member of a server makes one
think the server is tracked while it's the opposite, it's a pointer
to the server being tracked. This is particularly true in constructs
such as :
if (srv->tracked) {
Since it's the second time I get caught misunderstanding it, let's
rename it to "track" to avoid the confusion.
Baptiste Assmann reported that a config where a non-existing peers
section is referenced by a stick-table causes a segfault after displaying
the error. This is caused by the freeing of the peers. Setting it to NULL
after displaying the error fixes the issue.
For a long time, the max number of headers was taken as a part of the buffer
size. Since the header size can be configured at runtime, it does not make
much sense anymore.
Nothing was making it necessary to have a static value, so let's turn this into
a tunable with a default value of 101 which equals what was previously used.
It makes no sense to have one pointer to the hdr_idx pool in each proxy
struct since these pools do not depend on the proxy. Let's have a common
pool instead as it is already the case for other types.
By default, pipes are the default size for the system. But sometimes when
using TCP splicing, it can improve performance to increase pipe sizes,
especially if it is suspected that pipes are not filled and that many
calls to splice() are performed. This has an impact on the kernel's
memory footprint, so this must not be changed if impacts are not understood.
If a peers section has no peer named as the local peer, we must destroy
it, otherwise a NULL peer frontend remains in the lists and a segfault
can happen upon a soft restart.
We also now report the missing peer name in order to help troubleshooting.
Peers' frontends must have logging disabled by default, which was not
the case, so logs were randomly emitted upon restart, sometimes causing
a new process to fail to replace the old one.
This made sense a long time ago but since the maxconn is dynamically
computed from the tracking tables, it does not make any sense anymore
and will harm future changes.
This one enforces a per-process connection rate limit, regardless of what
may be set per frontend. It can be a way to limit the CPU usage of a process
being severely attacked.
The side effect is that the global process connection rate is now measured
for each incoming connection, so it will be possible to report it.
If "option forwardfor" has the "if-none" argument, then the header is
only added when the request did not already have one. This option has
security implications, and should not be set blindly.
Manoj Kumar reported a case where haproxy would crash upon start-up. The
cause was an "http-check expect" statement declared in the defaults section,
which caused a NULL regex to be used during the check. This statement is not
allowed in defaults sections precisely because this requires saving a copy
of the regex in the default proxy. But the check was not made to prevent it
from being declared there, hence the issue.
Instead of adding code to detect its abnormal use, we decided to implement
it. It was not that much complex because the expect_str part was not used
with regexes, so it could hold the string form of the regex in order to
compile it again for every backend (there's no way to clone regexes).
This patch has been tested and works. So it's both a bugfix and a minor
feature enhancement.
It should be backported to 1.4 though it's not critical since the config
was not supposed to be supported.
Adding health checks has become a real pain, with cross-references to all
checks everywhere because they're all a single bit. Since they're all
exclusive, let's change this to have a check number only. We reserve 4
bits allowing up to 16 checks (15+tcp), only 7 of which are currently
used. The code has shrunk by almost 1kB and we saved a few option bits.
The "dispatch" option has been moved to px->options, making a few tests
a bit cleaner.
This patch provides a new "option redis-check" statement to enable server health checks based on redis PING request (http://www.redis.io/commands/ping).
This was revealed with one of the very latest patches which caused
the listener_queue not to be initialized on the stats socket frontend.
And in fact a number of other ones were missing too. This is getting so
boring that now we'll always make use of the same function to initialize
any proxy. Doing so has even saved about 500 bytes on the binary due to
the avoided code redundancy.
No backport is needed.
This function is finally not needed anymore, as it has been replaced with
a per-proxy task that is scheduled when some limits are encountered on
incoming connections or when the process is stopping. The savings should
be noticeable on configs with a large number of proxies. The most important
point is that the rate limiting is now enforced in a clean and solid way.
All listeners that are limited by a proxy-specific resource are now
queued at the proxy's and not globally. This allows finer-grained
wakeups when releasing resource.
Never add connections allocated to this sever to a stick-table.
This may be used in conjunction with backup to ensure that
stick-table persistence is disabled for backup servers.
This adds the "on-marked-down shutdown-sessions" statement on "server" lines,
which causes all sessions established on a server to be killed at once when
the server goes down. The task's priority is reniced to the highest value
(1024) so that servers holding many tasks don't cause a massive slowdown due
to the wakeup storm.
The motivation for this is to allow iteration of all the connections
of a server without the expense of iterating over the global list
of connections.
The first use of this will be to implement an option to close connections
associated with a server when is is marked as being down or in maintenance
mode.
mysqld >= 5.5 want the client to announce 4.1+ authentication support, even if we have no password, so we do this.
I also check on a debian potato mysqld 3.22 and it works too so i assume we are good from 3.22 to 5.5.
[WT: this must be backported to 1.4]
The fullconn value is not easy to get right when doing dynamic regulation,
as it should depend on the maxconns of the frontends that can reach a
backend. Since the parameter is mandatory, many configs are found with
an inappropriate default value.
Instead of rejecting configs without a fullconn value, we now set it to
10% of the sum of the configured maxconns of all the frontends which are
susceptible to branch to the backend. That way if new frontends are added,
the backend's fullconn automatically adjusts itself.
Since version 1.0.0, it's forbidden to have a cookie specified without at
least one server. This test is useless and makes it complex to write APIs
to iteratively generate working configurations. Remove the test.
There are some very rare server-to-server applications that abuse the HTTP
protocol and expect the payload phase to be highly interactive, with many
interleaved data chunks in both directions within a single request. This is
absolutely not supported by the HTTP specification and will not work across
most proxies or servers. When such applications attempt to do this through
haproxy, it works but they will experience high delays due to the network
optimizations which favor performance by instructing the system to wait for
enough data to be available in order to only send full packets. Typical
delays are around 200 ms per round trip. Note that this only happens with
abnormal uses. Normal uses such as CONNECT requests nor WebSockets are not
affected.
When "option http-no-delay" is present in either the frontend or the backend
used by a connection, all such optimizations will be disabled in order to
make the exchanges as fast as possible. Of course this offers no guarantee on
the functionality, as it may break at any other place. But if it works via
HAProxy, it will work as fast as possible. This option should never be used
by default, and should never be used at all unless such a buggy application
is discovered. The impact of using this option is an increase of bandwidth
usage and CPU usage, which may significantly lower performance in high
latency environments.
This change should be backported to 1.4 since the first report of such a
misuse was in 1.4. Next patch will also be needed.
It's always been a mess to debug wrong listening addresses because
the parsing function does not indicate the file and line number. Now
it does. Since the code was almost a duplicate of str2sa_range, it
now makes use of it and has been sensibly reduced.
The parser now distinguishes between pure addresses and address:port. This
is useful for some config items where only an address is required.
Raw IPv6 addresses are now parsed, but IPv6 host name resolution is still not
handled (gethostbyname does not resolve IPv6 names to addresses).
This option enables use of the PROXY protocol with the server, which
allows haproxy to transport original client's address across multiple
architecture layers.
And also rename "req_acl_rule" "http_req_rule". At the beginning that
was a bit confusing to me, especially the "req_acl" list which in fact
holds what we call rules. After some digging, it appeared that some
part of the code is 100% HTTP and not just related to authentication
anymore, so let's move that part to HTTP and keep the auth-only code
in auth.c.
This patch turns internal server addresses to sockaddr_storage to
store IPv6 addresses, and makes the connect() function use it. This
code already works but some caveats with getaddrinfo/gethostbyname
still need to be sorted out while the changes had to be merged at
this stage of internal architecture changes. So for now the config
parser will not emit an IPv6 address yet so that user experience
remains unchanged.
This change should have absolutely zero user-visible effect, otherwise
it's a bug introduced during the merge, that should be reported ASAP.
Since all of them are defined as proxy options, it's better to ensure
that at most one of them is enabled at once. The priority has been set
according to what is already performed in the backend :
1) dispatch
2) http_proxy
3) transparent
Till now we used the fact that the dispatch address was not null to use
the dispatch mode. This is very unconvenient, so let's have a dedicated
option.
We used to only count one socket instead of one per listener. This makes
the socket count wrong, preventing from automatically computing the proper
number of sockets to bind.
This fix must be backported to 1.4 and 1.3.
I have written a small patch to enable a correct PostgreSQL health check
It works similar to mysql-check with the very same parameters.
E.g.:
listen pgsql 127.0.0.1:5432
mode tcp
option pgsql-check user pgsql
server masterdb pgsql.server.com:5432 check inter 10000
One of the requirements we have is to run multiple instances of haproxy on a
single host; this is so that we can split the responsibilities (and change
permissions) between product teams. An issue we ran up against is how we
would distinguish between the logs generated by each instance. The solution
we came up with (please let me know if there is a better way) is to override
the application tag written to syslog. We can then configure syslog to write
these to different files.
I have attached a patch adding a global option 'log-tag' to override the
default syslog tag 'haproxy' (actually defaults to argv[0]).
By passing a negative value to the "mss" argument of "bind" lines, it
becomes possible to subtract this value to the MSS advertised by the
client, which results in segments smaller than advertised. The effect
is useful with some TCP stacks which ACK less often when segments are
not full, because they only ACK every other full segment as suggested
by RFC1122.
NOTE: currently this has no effect on Linux kernel 2.6, a kernel patch
is still required to change the MSS of established connections.
Haproxy does not include the hostname rather the IP of the machine in
the syslog headers it sends. Unfortunately this means that for each log
line rsyslog does a reverse dns on the client IP and in the case of
non-routable IPs one gets the public hostname not the internal one.
While this is valid according to RFC3164 as one might imagine this is
troublsome if you have some machines with public IPs, internal IPs, no
reverse DNS entries, etc and you want a standardized hostname based log
directory structure. The rfc says the preferred value is the hostname.
This patch adds a global "log-send-hostname" statement which accepts an
optional string to force the host name. If unset, the local host name
is used.
Using haproxy in multi-process mode (nbproc > 1), some features can be
not fully compatible or not work at all. haproxy will now display a warning on
startup for :
- appsession
- sticking rules
- stats / stats admin
- stats socket
- peers (fatal error in that case)
When the number of servers is a multiple of the size of the input set,
map-based hash can be inefficient. This typically happens with 64
servers when doing URI hashing. The "avalanche" hash-type applies an
avalanche hash before performing a map lookup in order to smooth the
distribution. The result is slightly less smooth than the map for small
numbers of servers, but still better than the consistent hashing.
Enhance pattern convs and fetch argument parsing, now fetchs and convs callbacks used typed args.
Add more details on error messages on parsing pattern expression function.
Update existing pattern convs and fetchs to new proto.
Create stick table key type "binary".
Manage Truncation and padding if pattern's fetch-converted result don't match table key size.
Some options depends on the target architecture or compilation options.
When such an option is used on a compiled version that doesn't support it,
it's probably better to identify it as an unsupported option due to
compilation options instead of an unknown option.
Edit: better check on the empty capability than on the option bits. -Willy
This option makes haproxy preserve any persistence cookie emitted by
the server, which allows the server to change it or to unset it, for
instance, after a logout request.
(cherry picked from commit 52e6d75374c7900c1fe691c5633b4ae029cae8d5)
When a backend defines a new cookie, it forgot to unset any params
that could have been set in a defaults section, resulting in configs
that would sometimes refuse to load or not work as expected.
(cherry picked from commit f80bf174ed905a29a3ed8ee91fcd528da6df174f)
The MySQL check has been revamped to be able to send real MySQL data,
and to avoid Aborted connects on MySQL side.
It is however backward compatible with older version, but it is highly
recommended to use the new mode, by adding "user <username>" on the
"mysql-check" line.
The new check consists in sending two MySQL packet, one Client
Authentication packet, with "haproxy" username (by default), and one
QUIT packet, to correctly close MySQL session. We then parse the Mysql
Handshake Initialisation packet and/or Error packet. It is a basic but
useful test which does not produce error nor aborted connect on the
server.
(cherry picked from commit a1e4dcfe5718311b7653d7dabfad65c005d0439b)
Health checks were all pure ASCII, but we're going to have to support some
binary checks (eg: SQL). When they're inherited from the default section,
they will be truncated to the first \0 due to strdup(). Let's fix that with
a simple malloc.
(cherry picked from commit 98fc04a766bcff80f57db2b1cd865c91761b131b)
Keywords were changed just before the commit but not in the help message.
Spotted by Hank A. Paulson.
(cherry picked from commit fdd46a0766dccec704aa1bd5acb0ac99a801c549)
The stats web interface must be read-only by default to prevent security
holes. As it is now allowed to enable/disable servers, a new keyword
"stats admin" is introduced to activate this admin level, conditioned by ACLs.
(cherry picked from commit 5334bab92ca7debe36df69983c19c21b6dc63f78)
Add two new arguments to the "cookie" keyword, to be able to
fix a max idle and max life on them. Right now only the parameter
parsing is implemented.
(cherry picked from commit 9ad5dec4c3bb8f29129f292cb22d3fc495fcc98a)
HTTP content-based health checks will be involved in searching text in pages.
Some pages may not fit in the default buffer (16kB) and sometimes it might be
desired to have larger buffers in order to find patterns. Running checks on
smaller URIs is always preferred of course.
(cherry picked from commit 043f44aeb835f3d0b57626c4276581a73600b6b1)
This patch adds the "http-check expect [r]{string,status}" statements
which enable health checks based on whether the response status or body
to an HTTP request contains a string or matches a regex.
This probably is one of the oldest patches that remained unmerged. Over
the time, several people have contributed to it, among which FinalBSD
(first and second implementations), Nick Chalk (port to 1.4), Anze
Skerlavaj (tests and fixes), Cyril Bont (general fixes), and of course
myself for the final fixes and doc during integration.
Some people already use an old version of this patch which has several
issues, among which the inability to search for a plain string that is
not at the beginning of the data, and the inability to look for response
contents that are provided in a second and subsequent recv() calls. But
since some configs are already deployed, it was quite important to ensure
a 100% compatible behaviour on the working cases.
Thus, that patch fixes the issues while maintaining config compatibility
with already deployed versions.
(cherry picked from commit b507c43a3ce9a8e8e4b770e52e4edc20cba4c37f)
This patch provides a new "option ldap-check" statement to enable
server health checks based on LDAPv3 bind requests.
(cherry picked from commit b76b44c6fed8a7ba6f0f565dd72a9cb77aaeca7c)
This counter is incremented for each incoming connection and each active
listener, and is used to prevent haproxy from stopping upon SIGUSR1. It
will thus be possible for some tasks in increment this counter in order
to prevent haproxy from dying until they have completed their job.
The assumption that there was a 1:1 relation between tracked counters and
the frontend/backend role was wrong. It is perfectly possible to track the
track-fe-counters from the backend and the track-be-counters from the
frontend. Thus, in order to reduce confusion, let's remove this useless
{fe,be} reference and simply use {1,2} instead. The keywords have also been
renamed in order to limit confusion. The ACL rule action now becomes
"track-sc{1,2}". The ACLs are now "sc{1,2}_*" instead of "trk{fe,be}_*".
That means that we can reasonably document "sc1" and "sc2" (sticky counters
1 and 2) as sort of patterns that are available during the whole session's
life and use them just like any other pattern.
Doing so allows us to track counters from backends or depending on contents.
For instance, it now becomes possible to decide to track a connection based
on a Host header if enough time is granted to parse the HTTP request. It is
also possible to just track frontend counters in the frontend and unconditionally
track backend counters in the backend without having to write complex rules.
The first track-fe-counters rule executed is used to track counters for
the frontend, and the first track-be-counters rule executed is used to track
counters for the backend. Nothing prevents a frontend from setting a track-be
rule nor a backend from setting a track-fe rule. In fact these rules are
arbitrarily split between FE and BE with no dependencies.
Having a single tracking pointer for both frontend and backend counters
does not work. Instead let's have one for each. The keyword has changed
to "track-be-counters" and "track-fe-counters", and the ACL "trk_*"
changed to "trkfe_*" and "trkbe_*".
We're now able to return errors based on the validity of an argument
passed to a stick-table store data type. We also support ARG_T_DELAY
to pass delays to stored data types (eg: for rate counters).
Some data types will require arguments (eg: period for a rate counter).
This patch adds support for such arguments between parenthesis in the
"store" directive of the stick-table statement. Right now only integers
are supported.
This patch adds the ability to set a pointer in the session to an
entry in a stick table which holds various counters related to a
specific pattern.
Right now the syntax matches the target syntax and only the "src"
pattern can be specified, to track counters related to the session's
IPv4 source address. There is a special function to extract it and
convert it to a key. But the goal is to be able to later support as
many patterns as for the stick rules, and get rid of the specific
function.
The "track-counters" directive may only be set in a "tcp-request"
statement right now. Only the first one applies. Probably that later
we'll support multi-criteria tracking for a single session and that
we'll have to name tracking pointers.
No counter is updated right now, only the refcount is. Some subsequent
patches will have to bring that feature.
Sometimes it's necessary to be able to perform some "layer 6" analysis
in the backend. TCP request rules were not available till now, although
documented in the diagram. Enable them in backend now.
The stick_tables will now be able to store extra data for a same key.
A limited set of extra data types will be defined and for each of them
an offset in the sticky session will be assigned at startup time. All
of this information will be stored in the stick table.
The extra data types will have to be specified after the new "store"
keyword of the "stick-table" directive, which will reserve some space
for them.
pattern.c depended on stick_table while in fact it should be the opposite.
So we move from pattern.c everything related to stick_tables and invert the
dependency. That way the code becomes more logical and intuitive.
A new function session_accept() is now called from the lower layer to
instanciate a new session. Once the session is instanciated, the upper
layer's frontent_accept() is called. This one can be service-dependant.
That way, we have a 3-phase accept() sequence :
1) protocol-specific, session-less accept(), which is pointed to by
the listener. It defaults to the generic stream_sock_accept().
2) session_accept() which relies on a frontend but not necessarily
for use in a proxy (eg: stats or any future service).
3) frontend_accept() which performs the accept for the service
offerred by the frontend. It defaults to frontend_accept() which
is really what is used by a proxy.
The TCP/HTTP proxies have been moved to this mode so that we can now rely on
frontend_accept() for any type of session initialization relying on a frontend.
The next step will be to convert the stats to use the same system for the stats.
We can disable the monitor-net rules on a listener if this flag is not
set in the listener's options. This will be useful when we don't want
to check that fe->addr is set or not for non-TCP frontends.
The new LI_O_TCP_RULES listener option indicates that some TCP rules
must be checked upon accept on this listener. It is now checked by
the frontend and the L4 rules are evaluated only in this case. The
flag is only set when at least one tcp-req rule is present in the
frontend.
The L4 rules check function has now been moved to proto_tcp.c where
it ought to be.
For a long time we had two large accept() functions, one for TCP
sockets instanciating proxies, and another one for UNIX sockets
instanciating the stats interface.
A lot of code was duplicated and both did not work exactly the same way.
Now we have a stream_sock layer accept() called for either TCP or UNIX
sockets, and this function calls the frontend-specific accept() function
which does the rest of the frontend-specific initialisation.
Some code is still duplicated (session & task allocation, stream interface
initialization), and might benefit from having an intermediate session-level
accept() callback to perform such initializations. Still there are some
minor differences that need to be addressed first. For instance, the monitor
nets should only be checked for proxies and not for other connection templates.
Last, we renamed l->private as l->frontend. The "private" pointer in
the listener is only used to store a frontend, so let's rename it to
eliminate this ambiguity. When we later support detached listeners
(eg: FTP), we'll add another field to avoid the confusion.
It was once reported at least by Dirk Taggesell that the consistent
hash had a very poor distribution, making use of only two servers.
Jeff Persch analysed the code and found the root cause. Consistent
hash makes use of the server IDs, which are completed after the chash
array initialization. This implies that each server which does not
have an explicit "id" parameter will be merged at the same place in
the chash tree and that in the end, only the first or last servers
may be used.
The now obvious fix (thanks to Jeff) is to assign the missing IDs
earlier. However, it should be clearly understood that changing a
hash algorithm on live systems will rebalance the whole system.
Anyway, the only affected users will be the ones for which the
system is quite unbalanced already. The ones who fix their IDs are
not affected at all.
Kudos to Jeff for spotting that bug which got merged 3 days after
the consistent hashing !
This is used to disable persistence depending on some conditions (for
example using an ACL matching static files or a specific User-Agent).
You can see it as a complement to "force-persist".
In the configuration file, the force-persist/ignore-persist declaration
order define the rules priority.
Used with the "appsesion" keyword, it can also help reducing memory usage,
as the session won't be hashed the persistence is ignored.
Some servers do not completely conform with RFC2616 requirements for
keep-alive when they receive a request with "Connection: close". More
specifically, they don't bother using chunked encoding, so the client
never knows whether the response is complete or not. One immediately
visible effect is that haproxy cannot maintain client connections alive.
The second issue is that truncated responses may be cached on clients
in case of network error or timeout.
scar Fras Barranco reported this issue on Tomcat 6.0.20, and
Patrik Nilsson with Jetty 6.1.21.
Cyril Bont proposed this smart idea of pretending we run keep-alive
with the server and closing it at the last moment as is already done
with option forceclose. The advantage is that we only change one
emitted header but not the overall behaviour.
Since some servers such as nginx are able to close the connection
very quickly and save network packets when they're aware of the
close negociation in advance, we don't enable this behaviour by
default.
"option http-pretend-keepalive" will have to be used for that, in
conjunction with "option http-server-close".
Using get_ip_from_hdr2() we can look for occurrence #X or #-X and
extract the IP it contains. This is typically designed for use with
the X-Forwarded-For header.
Using "usesrc hdr_ip(name,occ)", it becomes possible to use the IP address
found in <name>, and possibly specify occurrence number <occ>, as the
source to connect to a server. This is possible both in a server and in
a backend's source statement. This is typically used to use the source
IP previously set by a upstream proxy.
We'll need another flag in the 'options' member close to PR_O_TPXY_*,
and all are used, so let's move this easy one to options2 (which are
already used for SQL checks).
It's very common to see people getting trapped by HTTP-only options
which don't work in TCP proxies. To help them definitely get rid of
those configs, let's emit warnings for all options and statements
which are not supported in their mode. That includes all HTTP-only
options, the cookies and the stats.
In order to ensure internal config correctness, the options are also
disabled.
To save a little memory, the check_data buffer is only allocated
for the servers that are checked.
[WT: this patch saves 80 MB of RAM on the test config with 5000 servers]
We are seeing both real servers repeatedly going on- and off-line with
a period of tens of seconds. Packet tracing, stracing, and adding
debug code to HAProxy itself has revealed that the real servers are
always responding correctly, but HAProxy is sometimes receiving only
part of the response.
It appears that the real servers are sending the test page as three
separate packets. HAProxy receives the contents of one, two, or three
packets, apparently randomly. Naturally, the health check only
succeeds when all three packets' data are seen by HAProxy. If HAProxy
and the real servers are modified to use a plain HTML page for the
health check, the response is in the form of a single packet and the
checks do not fail.
(...)
I've added buffer and length variables to struct server, and allocated
space with the rest of the server initialisation.
(...)
It seems to be working fine in my tests, and handles check responses
that are bigger than the buffer.
We have been using haproxy to balance a not very well written application
(http://www.blackboard.com/). Using the "insert postonly indirect" cookie
method, I was attempting to remove the cookie when users would logout,
allowing the machine to re-balance for the next user (this application is
used in school computer labs, so a computer might stay on the whole day
but be used on and off).
I was having a lot of trouble because when the cookie was set, it was with
"Path=/", but when being cleared there was no "Path" in the set cookie
header, and because the logout page was in a different place of the
website (which I couldn't change), the cookie would not be cleared. I
don't know if this would be a problem for anyone other than me (as our
HTTP application is so un-adjustable), but just in case, I have included
the patch I used. Maybe it will help someone else.
[ WT: this was a correct fix, and I also added the same missing path to
the set-cookie option ]
isalnum, isdigit and friends are really annoying because they take
an int in which we should pass an unsigned char, while strings
everywhere use chars. Solaris uses macros relying on an array for
those functions, which easily triggers some warnings showing where
we have mistakenly passed a char instead of an unsigned char or an
int. Those warnings may indicate real bugs on some platforms
depending on the implementation.
When a host name could not be resolved, an alert was emitted but the
service used to start with 0.0.0.0 for the IP address, because the
address parsing functions could not report an error. This is now
changed. This fix must be backported to 1.3 as it was first discovered
there.
[WT: it was not a bug, I did it on purpose to leave no hole between IDs,
though it's not very practical when admins want to force some entries
after they have been used, because they'd rather leave a hole than
renumber everything ]
Forcing some of IDs should not shift others.
Regression introduced in 53fb4ae261
---cut here---
global
stats socket /home/ole/haproxy.stat user ole group ole mode 660
frontend F1
bind 127.0.0.1:9999
mode http
backend B1
mode http
backend B2
mode http
id 9999
backend B3
mode http
backend B4
mode http
---cut here---
Before 53fb4ae261:
$ echo "show stat" | socat unix-connect:/home/ole/haproxy.stat stdio|cut -d , -f 28
iid
1
2
9999
4
5
After 53fb4ae261:
$ echo "show stat" | socat unix-connect:/home/ole/haproxy.stat stdio|cut -d , -f 28
iid
1
2
9999
3
4
With this patch:
$ echo "show stat" | socat unix-connect:/home/ole/haproxy.stat stdio|cut -d , -f 28
iid
1
2
9999
4
5
Thich patch fixes cfgparser not to leak memory on each
default server statement and adds several missing free
calls in deinit():
- free(l->name)
- free(l->counters)
- free(p->desc);
- free(p->fwdfor_hdr_name);
None of them are critical, hopefully.
SSL and SQL checks did only perform a free() of the request without replacing
it, so having multiple SSL/SQL check declarations after another check type
causes a double free condition during config parsing. This should be backported
although it's harmless.
Anonymous ACLs allow the declaration of rules which rely directly on
ACL expressions without passing via the declaration of an ACL. Example :
With named ACLs :
acl site_dead nbsrv(dynamic) lt 2
acl site_dead nbsrv(static) lt 2
monitor fail if site_dead
With anonymous ACLs :
monitor fail if { nbsrv(dynamic) lt 2 } || { nbsrv(static) lt 2 }
Support the new syntax (http-request allow/deny/auth) in
http stats.
Now it is possible to use the same syntax is the same like in
the frontend/backend http-request access control:
acl src_nagios src 192.168.66.66
acl stats_auth_ok http_auth(L1)
stats http-request allow if src_nagios
stats http-request allow if stats_auth_ok
stats http-request auth realm LB
The old syntax is still supported, but now it is emulated
via private acls and an aditional userlist.
Add generic authentication & authorization support.
Groups are implemented as bitmaps so the count is limited to
sizeof(int)*8 == 32.
Encrypted passwords are supported with libcrypt and crypt(3), so it is
possible to use any method supported by your system. For example modern
Linux/glibc instalations support MD5/SHA-256/SHA-512 and of course classic,
DES-based encryption.
Just as for the req* rules, we can now condition rsp* rules with ACLs.
ACLs match on response, so volatile request information cannot be used.
A warning is emitted if a configuration contains such an anomaly.
All the req* rules except the reqadd rules can now be specified with
an if/unless condition. If a condition is specified and does not match,
the filter is ignored. This is particularly useful with reqidel, reqirep
and reqtarpit.
A new function was added to take care of the common code between
all those keywords. This has saved 8 kB of object code and about
500 lines of source code. This has also permitted to spot and fix
minor bugs (allocated args that were never used).
The code could be factored even more but that would make it a bit
more complex which is not interesting at this stage.
Various tests have been performed, and the warnings and errors are
still correctly reported and everything seems to work as expected.
Now a server can check the contents of the header X-Haproxy-Server-State
to know how haproxy sees it. The same values as those reported in the stats
are provided :
- up/down status + check counts
- throttle
- weight vs backend weight
- active sessions vs backend sessions
- queue length
- haproxy node name
Currently we cannot easily add headers nor anything to HTTP checks
because the requests are pre-formatted with the last CRLF. Make the
check code add the CRLF itself so that we can later add useful info.
Hi Willy,
I've made a quick pass on the "defaults" column in the Proxy keywords matrix (chapter 4.1. in the documentation).
This patch resyncs the code and the documentation. I let you decide if some keywords that still work in the "defaults" section should be forbidden.
- default_backend : in the matrix, "defaults" was not supported but the keyword details say it is.
Tests also shows it works, then I've updated the matrix.
- capture cookie : in the keyword details, we can read `It is not possible to specify a capture in a "defaults" section.'.
Ok, even if the tests worked, I've added an alert in the configuration parser (as it is for capture request/response header).
- description : not supported in "defaults", I added an alert in the parser.
I've also noticed that this keyword doesn't appear in the documentation.
There's one "description" entry, but for the "global" section, which is for a different use (the patch doesn't update the documentation).
- grace : even if this is maybe useless, it works in "defaults". Documentation is updated.
- redirect : alert is added in the parser.
- rsprep : alert added in the parser.
--
Cyril Bont
Despite what is explicitly stated in HTTP specifications,
browsers still use the undocumented Proxy-Connection header
instead of the Connection header when they connect through
a proxy. As such, proxies generally implement support for
this stupid header name, breaking the standards and making
it harder to support keep-alive between clients and proxies.
Thus, we add a new "option http-use-proxy-header" to tell
haproxy that if it sees requests which look like proxy
requests, it should use the Proxy-Connection header instead
of the Connection header.
This is used to force access to down servers for some requests. This
is useful when validating that a change on a server correctly works
before enabling the server again.
Sometimes we need to be able to change the default kernel socket
buffer size (recv and send). Four new global settings have been
added for this :
- tune.rcvbuf.client
- tune.rcvbuf.server
- tune.sndbuf.client
- tune.sndbuf.server
Those can be used to reduce kernel memory footprint with large numbers
of concurrent connections, and to reduce risks of write timeouts with
very slow clients due to excessive kernel buffering.
Sometimes it can be desired to return a location which is the same
as the request with a slash appended when there was not one in the
request. A typical use of this is for sending a 301 so that people
don't reference links without the trailing slash. The name of the
new option is "append-slash" and it can be used on "redirect"
statements in prefix mode.
This patch implements default-server support allowing to change
default server options. It can be used in [defaults] or [backend]/[listen]
sections. Currently the following options are supported:
- error-limit
- fall
- inter
- fastinter
- downinter
- maxconn
- maxqueue
- minconn
- on-error
- port
- rise
- slowstart
- weight
Supported informations, available via "tr/td title":
- cap: capabilities (proxy)
- mode: one of tcp, http or health (proxy)
- id: SNMP ID (proxy, socket, server)
- IP (socket, server)
- cookie (backend, server)
This option enables HTTP keep-alive on the client side and close mode
on the server side. This offers the best latency on the slow client
side, and still saves as many resources as possible on the server side
by actively closing connections. Pipelining is supported on both requests
and responses, though there is currently no reason to get pipelined
responses.
This option was disabled for frontends in the configuration because
it was useless in its initial implementation, though it was still
checked in the code. Let's officially enable it now.
The previous check was correct: the RFC states that it is required
to have a domain-name which contained a dot AND began with a dot.
However, currently some (all?) browsers do not obey this specification,
so such configuration might work.
This patch reverts 3d8fbb6658 but
changes the check from FATAL to WARNING and extends the message.
Fix 500b8f0349 fixed the patch for the 64 bit
case but caused the opposite type issue to appear on 32 bit platforms. Cast
the difference and be done with it since gcc does not agree on type carrying
the difference between two pointers on 32 and 64 bit platforms.
Implement decreasing health based on observing communication between
HAProxy and servers.
Changes in this version 2:
- documentation
- close race between a started check and health analysis event
- don't force fastinter if it is not set
- better names for options
- layer4 support
Changes in this version 3:
- add stats
- port to the current 1.4 tree
Today I was testing headers manipulation but I met a bug with my first test.
To reproduce it, add for example this line :
rspadd Cache-Control:\ max-age=1500
Check the response header, it will provide :
Cache-Control: max-age=15000 <= the last character is duplicated
This only happens when we use backslashes on the last line of the
configuration file, without returning to the line.
Also if the last line is like :
rspadd Cache-Control:\ max-age=1500\
the last backslash causes a segfault.
This is not due to rspadd but to a more general bug in cfgparse.c :
...
if (skip) {
memmove(line + 1, line + 1 + skip, end - (line + skip + 1));
end -= skip;
}
...
should be :
...
if (skip) {
memmove(line + 1, line + 1 + skip, end - (line + skip));
end -= skip;
}
...
I've reproduced it with haproxy 1.3.22 and the last 1.4 snapshot.
In some environments it is not possible to rely on any wildcard for a
domain name (eg: .com, .net, .fr...) so it is required to send multiple
domain extensions. (Un)fortunately the syntax check on the domain name
prevented that from being done the dirty way. So let's just build a
domain list when multiple domains are passed on the same line.
(cherry picked from commit 950245ca2b)
It was a OR instead of a AND, so it was required to have a cookie
name which contained a dot AND began with a dot.
(cherry picked from commit a1e107fc13)
Holger Just reported that running ACLs with too many args caused
a segfault during config parsing. This is caused by a wrong test
on argument count. In case of too many arguments on a config line,
the last one was not correctly zeroed. This is now done and we
report the error indicating what part had been truncated.
(cherry picked from commit 3b39c1446b)
To sum up :
- len : it's now the max number of characters for the value, preventing
garbaged results.
- a new option "prefix" is added, this allows to use dynamic cookie
names (e.g. ASPSESSIONIDXXX).
Previously in the thread, I wanted to use the value found with
"capture cookie" but when i started to update the documentation, I
found this solution quite weird. I've made a small rework to not
depend on "capture cookie".
- There's the posssiblity to define the URL parser mode (path parameters
or query string).
Right now, an HTTP server cannot track a TCP server and vice-versa.
This patch enables proxy tracking without relying on the proxy's mode
(tcp/http/health). It only requires a matching proxy name to exist. The
original function was renamed to findproxy_mode().
The code part which waits for an HTTP response has been extracted
from the old function. We now have two analysers and the second one
may re-enable the first one when an 1xx response is encountered.
This has been tested and works.
The calls to stream_int_return() that were remaining in the wait
analyser have been converted to stream_int_retnclose().
This patch has 2 goals :
1. I wanted to test the appsession feature with a small PHP code,
using PHPSESSID. The problem is that when PHP gets an unknown session
id, it creates a new one with this ID. So, when sending an unknown
session to PHP, persistance is broken : haproxy won't see any new
cookie in the response and will never attach this session to a
specific server.
This also happens when you restart haproxy : the internal hash becomes
empty and all sessions loose their persistance (load balancing the
requests on all backend servers, creating a new session on each one).
For a user, it's like the service is unusable.
The patch modifies the code to make haproxy also learn the persistance
from the client : if no session is sent from the server, then the
session id found in the client part (using the URI or the client cookie)
is used to associated the server that gave the response.
As it's probably not a feature usable in all cases, I added an option
to enable it (by default it's disabled). The syntax of appsession becomes :
appsession <cookie> len <length> timeout <holdtime> [request-learn]
This helps haproxy repair the persistance (with the risk of losing its
session at the next request, as the user will probably not be load
balanced to the same server the first time).
2. This patch also tries to reduce the memory usage.
Here is a little example to explain the current behaviour :
- Take a Tomcat server where /session.jsp is valid.
- Send a request using a cookie with an unknown value AND a path
parameter with another unknown value :
curl -b "JSESSIONID=12345678901234567890123456789012" http://<haproxy>/session.jsp;jsessionid=00000000000000000000000000000001
(I know, it's unexpected to have a request like that on a live service)
Here, haproxy finds the URI session ID and stores it in its internal
hash (with no server associated). But it also finds the cookie session
ID and stores it again.
- As a result, session.jsp sends a new session ID also stored in the
internal hash, with a server associated.
=> For 1 request, haproxy has stored 3 entries, with only 1 which will be usable
The patch modifies the behaviour to store only 1 entry (maximum).
This can ensure that data is readily available on a socket when
we accept it, but a bug in the kernel ignores the timeout so the
socket can remain pending as long as the client does not talk.
Use with care.
Consistent hashing provides some interesting advantages over common
hashing. It avoids full redistribution in case of a server failure,
or when expanding the farm. This has a cost however, the hashing is
far from being perfect, as we associate a server to a request by
searching the server with the closest key in a tree. Since servers
appear multiple times based on their weights, it is recommended to
use weights larger than approximately 10-20 in order to smoothen
the distribution a bit.
In some cases, playing with weights will be the only solution to
make a server appear more often and increase chances of being picked,
so stats are very important with consistent hashing.
In order to indicate the type of hashing, use :
hash-type map-based (default, old one)
hash-type consistent (new one)
Consistent hashing can make sense in a cache farm, in order not
to redistribute everyone when a cache changes state. It could also
probably be used for long sessions such as terminal sessions, though
that has not be attempted yet.
More details on this method of hashing here :
http://www.spiteful.com/2008/03/17/programmers-toolbox-part-3-consistent-hashing/
Until now it was required that every custom ID was above 1000 in order to
avoid conflicts. Now we have the list of all assigned IDs and can automatically
pick the first unused one. This means that it is perfectly possible to interleave
automatic IDs with persistent IDs and the parser will automatically allocate
unused values starting with 1.
When a name or ID conflict is detected, it is sometimes useful to know
where the other one was declared. Now that we have this information,
report it in error messages.
This patch allows to collect & provide separate statistics for each socket.
It can be very useful if you would like to distinguish between traffic
generate by local and remote users or between different types of remote
clients (peerings, domestic, foreign).
Currently no "Session rate" is supported, but adding it should be possible
if we found it useful.
By default, when data is sent over a socket, both the write timeout and the
read timeout for that socket are refreshed, because we consider that there is
activity on that socket, and we have no other means of guessing if we should
receive data or not.
While this default behaviour is desirable for almost all applications, there
exists a situation where it is desirable to disable it, and only refresh the
read timeout if there are incoming data. This happens on sessions with large
timeouts and low amounts of exchanged data such as telnet session. If the
server suddenly disappears, the output data accumulates in the system's
socket buffers, both timeouts are correctly refreshed, and there is no way
to know the server does not receive them, so we don't timeout. However, when
the underlying protocol always echoes sent data, it would be enough by itself
to detect the issue using the read timeout. Note that this problem does not
happen with more verbose protocols because data won't accumulate long in the
socket buffers.
When this option is set on the frontend, it will disable read timeout updates
on data sent to the client. There probably is little use of this case. When
the option is set on the backend, it will disable read timeout updates on
data sent to the server. Doing so will typically break large HTTP posts from
slow lines, so use it with caution.
The "static-rr" is just the old round-robin algorithm. It is still
in use when a hash algorithm is used and the data to hash is not
present, but it was impossible to configure it explicitly. This one
is cheaper in terms of CPU and supports unlimited numbers of servers,
so it makes sense to be able to use it.
LB algo macros were composed of the LB algo by itself without any indication
of the method to use to look up a server (the lb function itself). This
method was implied by the LB algo, which was not very convenient to add
more algorithms. Now we have several fields in the LB macros, some to
describe what to look for in the requests, some to describe how to transform
that (kind of algo) and some to describe what lookup function to use.
The next patch will make it possible to factor out some code for all algos
which rely on a map.
This patch implements "description" (proxy and global) and "node" (global)
options, removes "node-name" and adds "show-node" & "show-desc" options
for "stats". It also changes the way the header lines (with proxy name) and
the statistics are displayed, so stats no longer look so clumsy with very
long names.
Instead of "node-name" it is possible to use show-node/show-desc with
an optional parameter that overrides a default node/description.
backend cust-0045
# report specific values for this customer
stats show-node Europe
stats show-desc Master node for Europe, Asia, Africa
It was becoming painful to have all the LB algos in backend.c.
Let's move them to their own files. A few hashing functions still
need be broken in two parts, one for the contents and one for the
map position.
Check if rise/fall has an argument and it is > 0 or bad things may happen
in the health checks. ;)
Now it is verified and the code no longer allows for such condition:
backend bad
(...)
server o-f0 192.168.129.27:80 check inter 4000 source 0.0.0.0 rise 0
server o-r0 192.168.129.27:80 check inter 4000 source 0.0.0.0 fall 0
server o-f1 192.168.129.27:80 check inter 4000 source 0.0.0.0 rise
server o-r1 192.168.129.27:80 check inter 4000 source 0.0.0.0 fall
[ALERT] 269/161830 (24136) : parsing [../git/haproxy.cfg:98]: 'rise' has to be > 0.
[ALERT] 269/161830 (24136) : parsing [../git/haproxy.cfg:99]: 'fall' has to be > 0.
[ALERT] 269/161830 (24136) : parsing [../git/haproxy.cfg:100]: 'rise' expects an integer argument.
[ALERT] 269/161830 (24136) : parsing [../git/haproxy.cfg:101]: 'fall' expects an integer argument.
Also add endline in the custom id checking code.
This patch adds health logging so it possible to check what
was happening before a crash. Failed healt checks are logged if
server is UP and succeeded healt checks if server is DOWN,
so the amount of additional information is limited.
I also reworked the code a little:
- check_status_description[] and check_status_info[] is now
joined into check_statuses[]
- set_server_check_status updates not only s->check_status and
s->check_duration but also s->result making the code simpler
Changes in v3:
- for now calculate and use local versions of health/rise/fall/state,
it is a slow path, no harm should be done. One day we may centralize
processing of the checks and remove the duplicated code.
- also log checks that are restoring current state
- use "conditionally succeeded" for 404 with disable-on-404
Collect information about last health check result,
including L7 code if possible (for example http or smtp
return code) and time took to finish last check.
Health check info is provided on both stats pages (html & csv)
and logged when a server is marked UP or DOWN. Currently active
check are marked with an asterisk, but only in html mode.
Currently there are 14 status codes:
UNK -> unknown
INI -> initializing
SOCKERR -> socket error
L4OK -> check passed on layer 4, no upper layers testing enabled
L4TOUT -> layer 1-4 timeout
L4CON -> layer 1-4 connection problem, for example "Connection refused"
(tcp rst) or "No route to host" (icmp)
L6OK -> check passed on layer 6
L6TOUT -> layer 6 (SSL) timeout
L6RSP -> layer 6 invalid response - protocol error
L7OK -> check passed on layer 7
L7OKC -> check conditionally passed on layer 7, for example
404 with disable-on-404
L7TOUT -> layer 7 (HTTP/SMTP) timeout
L7RSP -> layer 7 invalid response - protocol error
L7STS -> layer 7 response error, for example HTTP 5xx
The new tune.bufsize and tune.maxrewrite global directives allow one to
change the buffer size and the maxrewrite size. Right now, setting bufsize
too low will block stats sockets which will not be able to write at all.
An error checking must be added to buffer_write_chunk() so that if it
cannot write its message to an empty buffer, it causes the caller to abort.
sess_establish() used to resort to protocol-specific guesses
in order to set rep->analysers. This is no longer needed as it
gets set from the frontend and the backend as a copy of what
was defined in the configuration.
