Add keyword 'verify' on bind:
'verify none': authentication disabled (default)
'verify optional': accept connection without certificate
and process a verify if the client sent a certificate
'verify required': reject connection without certificate
and process a verify if the client send a certificate
Add keyword 'cafile' on bind:
'cafile <path>' path to a client CA file used to verify.
'crlfile <path>' path to a client CRL file used to verify.
Check the protocol pointer and not the socket to report an unknown family
in servers or peers. This can never happen anyway, it's just to be completely
clean.
It's better to set all listeners to ssl_sock when seeing the "ssl"
keyword that to loop on all of them afterwards just for this. This
also removes some #ifdefs.
Unix permissions are per-bind configuration line and not per listener,
so let's concretize this in the way the config is stored. This avoids
some unneeded loops to set permissions on all listeners.
The access level is not part of the unix perms so it has been moved
away. Once we can use str2listener() to set all listener addresses,
we'll have a bind keyword parser for this one.
Navigating through listeners was very inconvenient and error-prone. Not to
mention that listeners were linked in reverse order and reverted afterwards.
In order to definitely get rid of these issues, we now do the following :
- frontends have a dual-linked list of bind_conf
- frontends have a dual-linked list of listeners
- bind_conf have a dual-linked list of listeners
- listeners have a pointer to their bind_conf
This way we can now navigate from anywhere to anywhere and always find the
proper bind_conf for a given listener, as well as find the list of listeners
for a current bind_conf.
Otherwise we would risk a segfault when checking the config's validity
(eg: when looking for conflicts on ID assignments).
Note that the same issue exists with peers_fe and the global stats_fe. All
listeners should be reviewed and simplified to use a compatible declaration
mode.
When an unknown "bind" keyword is detected, dump the list of all
registered keywords. Unsupported default alternatives are also reported
as "not supported".
The "mode", "uid", "gid", "user" and "group" bind options were moved to
proto_uxst as they are unix-specific.
Note that previous versions had a bug here, only the last listener was
updated with the specified settings. However, it almost never happens
that bind lines contain multiple UNIX socket paths so this is not that
much of a problem anyway.
Registering new SSL bind keywords was not particularly handy as it required
many #ifdef in cfgparse.c. Now the code has moved to ssl_sock.c which calls
a register function for all the keywords.
Error reporting was also improved by this move, because the called functions
build an error message using memprintf(), which can span multiple lines if
needed, and each of these errors will be displayed indented in the context of
the bind line being processed. This is important when dealing with certificate
directories which can report multiple errors.
Now proto_tcp.c is responsible for the 4 settings it handles :
- defer-accept
- interface
- mss
- transparent
These ones do not need to be handled in cfgparse anymore. If support for a
setting is disabled by a missing build option, then cfgparse correctly
reports :
[ALERT] 255/232700 (2701) : parsing [echo.cfg:114] : 'bind' : 'transparent' option is not implemented in this version (check build options).
With the arrival of SSL, the "bind" keyword has received even more options,
all of which are processed in cfgparse in a cumbersome way. So it's time to
let modules register their own bind options. This is done very similarly to
the ACLs with a small difference in that we make the difference between an
unknown option and a known, unimplemented option.
Some settings need to be merged per-bind config line and are not necessarily
SSL-specific. It becomes quite inconvenient to have this ssl_conf SSL-specific,
so let's replace it with something more generic.
A side effect of this change is that the "ssl" keyword on "bind" lines is now
just a boolean and that "crt" is needed to designate certificate files or
directories.
Note that much refcounting was needed to have the free() work correctly due to
the number of cert aliases which can make a context be shared by multiple names.
SSL config holds many parameters which are per bind line and not per
listener. Let's use a per-bind line config instead of having it
replicated for each listener.
At the moment we only do this for the SSL part but this should probably
evolved to handle more of the configuration and maybe even the state per
bind line.
This is very convenient to reduce SSL processing priority compared to
other traffic. This applies to CPU usage only, but has a direct impact
on latency under congestion.
SSL connections take a huge amount of memory, and unfortunately openssl
does not check malloc() returns and easily segfaults when too many
connections are used.
The only solution against this is to provide a global maxsslconn setting
to reject SSL connections above the limit in order to avoid reaching
unsafe limits.
With SSL, connections are much more expensive, so it is important to be
able to limit concurrent connections per listener in order to limit the
memory usage.
I wrote a small path to add the SSL_OP_CIPHER_SERVER_PREFERENCE OpenSSL option
to frontend, if the 'prefer-server-ciphers' keyword is set.
Example :
bind 10.11.12.13 ssl /etc/haproxy/ssl/cert.pem ciphers RC4:HIGH:!aNULL:!MD5 prefer-server-ciphers
This option mitigate the effect of the BEAST Attack (as I understand), and it
equivalent to :
- Apache HTTPd SSLHonorCipherOrder option.
- Nginx ssl_prefer_server_ciphers option.
[WT: added a test for the support of the option]
This is aimed at disabling SSLv3 and TLSv1 respectively. SSLv2 is always
disabled. This can be used in some situations where one version looks more
suitable than the other.
Since the SSL handshake involves an immediate reply from the server
to the client, there's no point responding with a quick-ack before
sending the data, so disable quick-ack by default, just as it is done
for HTTP.
This shows a 2-2.5% transaction rate increase on a dual-core atom.
CVE-2009-3555 suggests that client-initiated renegociation should be
prevented in the middle of data. The workaround here consists in having
the SSL layer notify our callback about a handshake occurring, which in
turn causes the connection to be marked in the error state if it was
already considered established (which means if a previous handshake was
completed). The result is that the connection with the client is immediately
aborted and any pending data are dropped.
This option currently takes no option and simply turns SSL on for all
connections going to the server. It is likely that more options will
be needed in the future.
The PROXY protocol is now decoded in the connection before other
handshakes. This means that it may be extracted from a TCP stream
before SSL is decoded from this stream.
Some parts of the sock_ops structure were only used by the stream
interface and have been moved into si_ops. Some of them were callbacks
to the stream interface from the connection and have been moved into
app_cp as they're the application seen from the connection (later,
health-checks will need to use them). The rest has moved to data_ops.
Normally at this point the connection could live without knowing about
stream interfaces at all.
The "raw_sock" prefix will be more convenient for naming functions as
it will be prefixed with the data layer and suffixed with the data
direction. So let's rename the files now to avoid any further confusion.
The #include directive was also removed from a number of files which do
not need it anymore.
The correct spelling is "independent", not "independant". This patch
fixes the doc and the configuration parser to accept the correct form.
The config parser still allows the old naming for backwards compatibility.
This implements the feature discussed in the earlier thread of killing
connections on backup servers when a non-backup server comes back up. For
example, you can use this to route to a mysql master & slave and ensure
clients don't stay on the slave after the master goes from down->up. I've done
some minimal testing and it seems to work.
[WT: added session flag & doc, moved the killing after logging the server UP,
and ensured that the new server is really usable]
httponly This option tells haproxy to add an "HttpOnly" cookie attribute
when a cookie is inserted. This attribute is used so that a
user agent doesn't share the cookie with non-HTTP components.
Please check RFC6265 for more information on this attribute.
secure This option tells haproxy to add a "Secure" cookie attribute when
a cookie is inserted. This attribute is used so that a user agent
never emits this cookie over non-secure channels, which means
that a cookie learned with this flag will be presented only over
SSL/TLS connections. Please check RFC6265 for more information on
this attribute.
This one was already taken care of in proxy_cfg_ensure_no_http(), so if a
cookie is presented in a TCP backend, we got two warnings.
This can be backported to 1.4 since it's been this way for 2 years (although not dramatic).
Cookies were mixed with many other options while they're not used as options.
Move them to a dedicated bitmask (ck_opts). This has released 7 flags in the
proxy options and leaves some room for new proxy flags.
Option httplog needs to be checked only once the proxy has been validated,
so that its final mode (tcp/http) can be used. Also we need to check for
httplog before checking the log format, so that we can report a warning
about this specific option and not about the format it implies.
The listener struct is now aware of the socket layer to use upon accept().
At the moment, only sock_raw is supported so this patch should not change
anything.
Before it was possible to resize the buffers using global.tune.bufsize,
the trash has always been the size of a buffer by design. Unfortunately,
the recent buffer sizing at runtime forgot to adjust the trash, resulting
in it being too short for content rewriting if buffers were enlarged from
the default value.
The bug was encountered in 1.4 so the fix must be backported there.
