Everywhere conn_prepare() is used, the call to conn_init() has already
been done. We can now safely replace all instances of conn_prepare()
with conn_assign() which does not reset the transport layer, and remove
conn_prepare().
This function will ease the initialization of new connections as well
as their reuse. It initializes the obj_type and a few fields so that
the connection is fresh again. It leaves the addresses and target
untouched so it is suitable for use across connection retries.
In order to reduce the dependency over stream-interfaces, we now
attach the incoming connection to the embryonic session's target
instead of the stream-interface's connection. This means we won't
need to initialize stream interfaces anymore after we implement
dynamic connection allocation. The session's target is reset to
NULL after the session has been converted to a complete session.
The connection will only remain there as a pre-allocated entity whose
goal is to be placed in ->end when establishing an outgoing connection.
All connection initialization can be made on this connection, but all
information retrieved should be applied to the end point only.
This change is huge because there were many users of si->conn. Now the
only users are those who initialize the new connection. The difficulty
appears in a few places such as backend.c, proto_http.c, peers.c where
si->conn is used to hold the connection's target address before assigning
the connection to the stream interface. This is why we have to keep
si->conn for now. A future improvement might consist in dynamically
allocating the connection when it is needed.
This function makes no sense anymore and will cause trouble to convert
the remains of connection/applet to end points. Let's replace it now
with its contents.
The long-term goal is to have a context for applets as an alternative
to the connection and not as a complement. At the moment, the context
is still stored into the stream interface, and we only put a pointer
to the applet's context in si->end, initialize the context with object
type OBJ_TYPE_APPCTX, and this allows us not to allocate an entry when
deciding to switch to an applet.
A special care is taken to never dereference si->conn anymore when
dealing with an applet. That's why it's important that si->end is
always set to the proper type :
si->end == NULL => not connected to anything
*si->end == OBJ_TYPE_APPCTX => connected to an applet
*si->end == OBJ_TYPE_CONN => real connection (server, proxy, ...)
The session management code used to check the applet from the connection's
target. Now it uses the stream interface's end point and does not touch the
connection at all. Similarly, we stop checking the connection's addresses
and file descriptors when reporting the applet's status in the stats dump.
Since last commit, we now have a pointer to the applet in the
applet context. So we don't need the si->release function pointer
anymore, it can be extracted from applet->applet.release. At many
places, the ->release function was still tested for real connections
while it is only limited to applets, so most of them were simply
removed. For the remaining valid uses, a new inline function
si_applet_release() was added to simplify the check and the call.
In preparation for a later move of all the applet context outside of the
stream interface, we'll need to have access to the applet itself from the
context. Let's have a pointer to it inside the context.
si_prepare_embedded() was used both to attach an applet and to detach
anything from a stream interface. Split it into si_prepare_none() to
detach and si_prepare_applet() to attach an applet.
si->conn->target is now assigned from within these two functions instead
of their respective callers.
Since this is the applet context, call it ->appctx to avoid the confusion
with the pointer to the applet. Many places were changed but it's only a
renaming.
The object type was added to "struct appctx". The purpose will be
to identify an appctx when the applet context is detached from the
stream interface. For now, it's still attached, so this patch only
adds the new type and does not replace its use.
In preparation of making the applet context dynamically allocatable,
we create a "struct appctx". Nothing else was changed, it's the same
struct as the one which was in the stream interface.
A long time ago when peers were introduced, there was no applet nor
applet context. Applet contexts were introduced but the peers still
did not make use of them and the "ptr" pointer remains present in
every stream interface in addition to the other contexts.
Simply move this pointer to its own location in the context.
Note that this pointer is still a void* because its type and contents
varies depending on the peers session state. Probably that this could
be cleaned up in the future given that all other contexts already store
much more than a single pointer.
Most of the times, the caller of objt_<type>(ptr) will know that <ptr>
is valid and of the correct type (eg: in an "if" condition). Let's provide
an unsafe variant that does not perform the check again for these usages.
The new functions are called "__objt_<type>".
This is to be more consistent with the other functions. The only
reason why these functions used to return a value was to let the
caller adjust polling by itself, but now their only callers were
the si_shutr()/si_shutw() inline functions. Now these functions
do not depend anymore on the connection.
These connection variant of these functions now call
conn_data_stop_recv()/conn_data_stop_send() before returning order
not to require a return code anymore. The applet version does not
need this at all.
These functions induce a lot of ifs everywhere because they consider two
different cases, one which is where the connection exists and has a file
descriptor, and the other one which is the default case where at most an
applet has to be notified.
Let's have them in si_ops and automatically decide which one to use.
The connection shutdown sequence has been slightly simplified, and we
now clear the flags at the end.
Also we remove SHUTR_NOW after a shutw with nolinger, as it's cleaner
not to keep it.
There is a big trouble with the way POST is handled for the admin
stats page. The POST parameters are extracted from some http-request
rules, and if not round they return zero hoping for being called again
when more data passes. This results in the HTTP analyser being called
several times and all the rules prior to the stats being executed
multiple times as well. That includes rewrite rules.
So instead of doing this, we now move all the processing of the stats
into the stats applet.
That way we just set the stats applet in the HTTP analyser when a stats
request is detected, and the applet takes the time it needs to read the
arguments and respond. We could even imagine improving the applet to
support requests larger than a single buffer.
The code was almost only moved and minimally changed. Several new HTTP
states were added to the stats applet to emit headers, redirects and
to read POST. It was necessary to do this because the headers sent
depend on the parsing of the POST request. In the end it's beneficial
because we removed two stream_int_retnclose() calls.
In preparation for moving the POST processing to the applet, we first
add new states to the HTTP I/O handler. Till now st0 was only 0/1 for
start/end. We now replace it with an enum.
We make the peers code use applet->ptr instead of conn->xprt_ctx to
store the pointer to the current peer. That way it does not depend
on a connection anymore.
We're trying to move the applets out of the struct connection. So
let's remove the dependence on xprt_st and introduce si->applet.st2
to store the missing contextual data instead.
The store[] array in the session holds a flag which probably aimed to
differenciate store entries learned from the request from those learned
from the response, and allowing responses to overwrite only the request
ones (eg: have a server set a response cookie which overwrites the request
one).
But this flag is set when a response data is stored, and is never cleared.
So in practice, haproxy always runs with this flag set, meaning that
responses prevent themselves from overriding the request data.
It is desirable anyway to keep the ability not to override data, because
the override is performed only based on the table and not on the key, so
that would mean that it would be impossible to retrieve two different
keys to store into a same table. For example, if a client sets a cookie
and a server another one, both need to be updated in the table in the
proper order. This is especially true when multiple keys may be tracked
on each side into the same table (eg: list of IP addresses in a header).
So the correct fix which also maintains the current behaviour consists in
simply removing this flag and never try to optimize for the overwrite case.
This fix also has the benefit of significantly reducing the session size,
by 64 bytes due to alignment issues caused by this flag!
The bug has been there forever (since 1.4-dev7), so a backport to 1.4
would be appropriate.
In recent commit 5ecb77f (MEDIUM: checks: add send/expect tcp based check),
bitfields were mistakenly used at some places for the actions. Fortunately,
the only two actions right now are 1 and 2 so they don't share any bit in
common and the bug has no impact.
No backport is needed.
This is a generic health check which can be used to match a
banner or send a request and analyse a server response.
It works in a send/expect ways and many exchange can be done between
HAProxy and a server to decide the server status, making HAProxy able to
speak the server's protocol.
It can send arbitrary regular or binary strings and match content as a
regular or binary string or a regex.
Signed-off-by: Baptiste Assmann <bedis9@gmail.com>
We currently use such an hex parser in pat_parse_bin() to parse hex
string patterns. We'll need another generic one so let's move it to
standard.c and have pat_parse_bin() make use of it.
This patch permits to use the same struct pattern for two indentical maps.
This permits to preserve memory, and permits to update only one
"struct pattern" when the dynamic map update is supported.
We handle "http-request redirect" with a log-format string now, but we
leave "redirect" unaffected.
Note that the control of the special "/" case is move from the runtime
execution to the configuration parsing. If the format rule list is
empty, the build_logline() function does nothing.
Add a new converter with the following prototype :
map(<map_file>[,<default_value>])
map_<match_type>(<map_file>[,<default_value>])
map_<match_type>_<output_type>(<map_file>[,<default_value>])
It searches the for input value from <map_file> using the <match_type>
matching method, and return the associated value converted to the type
<output_type>. If the input value cannot be found in the <map_file>,
the converter returns the <default_value>. If the <default_value> is
not set, the converter fails and acts as if no input value could be
fetched. If the <match_type> is not set, it defaults to "str".
Likewise, if the <output_type> is not set, it defaults to "str". For
convenience, the "map" keyword is an alias for "map_str" and maps a
string to another string. The following array contains contains the
list of all the map* converters.
+----+----------+---------+-------------+------------+
| `-_ out | | | |
| input `-_ | str | int | ip |
| / match `-_ | | | |
+---------------+---------+-------------+------------+
| str / str | map_str | map_str_int | map_str_ip |
| str / sub | map_sub | map_sub_int | map_sub_ip |
| str / dir | map_dir | map_dir_int | map_dir_ip |
| str / dom | map_dom | map_dom_int | map_dom_ip |
| str / end | map_end | map_end_int | map_end_ip |
| str / reg | map_reg | map_reg_int | map_reg_ip |
| int / int | map_int | map_int_int | map_int_ip |
| ip / ip | map_ip | map_ip_int | map_ip_ip |
+---------------+---------+-------------+------------+
The names are intentionally chosen to reflect the same match methods
as ACLs use.
This patch allows each sample cast function to specify the sample
output type. The goal is to be able to emit an output type IPv4 or
IPv6 depending on what is found in the input if the next converter
is able to process them both.
The patch also adds a new pseudo type called "ADDR". This type is an
alias for IPV4 and IPV6 which is only used as an input type by converters
who want to express their compatibility with both address formats. It may
not be emitted.
The goal is to unify as much as possible the processing of IPv4 and IPv6
in order not to add extra keywords for the maps which act as converters,
but will match samples like ACLs do with their patterns.
We now have the following enums and all related functions return them and
consume them :
enum pat_match_res {
PAT_NOMATCH = 0, /* sample didn't match any pattern */
PAT_MATCH = 3, /* sample matched at least one pattern */
};
enum acl_test_res {
ACL_TEST_FAIL = 0, /* test failed */
ACL_TEST_MISS = 1, /* test may pass with more info */
ACL_TEST_PASS = 3, /* test passed */
};
enum acl_cond_pol {
ACL_COND_NONE, /* no polarity set yet */
ACL_COND_IF, /* positive condition (after 'if') */
ACL_COND_UNLESS, /* negative condition (after 'unless') */
};
It's just in order to avoid doubts when reading some code.
This patch just renames functions, types and enums. No code was changed.
A significant number of files were touched, especially the ACL arrays,
so it is likely that some external patches will not apply anymore.
One important thing is that we had to split ACL_PAT_* into two groups :
- ACL_TEST_{PASS|MISS|FAIL}
- PAT_{MATCH|UNMATCH}
A future patch will enforce enums on all these places to avoid confusion.
This patch just moves code without any change.
The ACL are just the association between sample and pattern. The pattern
contains the match method and the parse method. These two things are
different. This patch cleans the code by splitting it.
This will be used later with maps. Each map will associate an entry with
a sample_storage value.
This patch changes the "parse" prototype and all the parsing methods.
The goal is to associate "struct sample_storage" to each entry of
"struct acl_pattern". Only the "parse" function can add the sample value
into the "struct acl_pattern".
This struct is used to store a sample constant. The size of this
struct is less than the struct sample. This struct only contains
a constant and doesn't need the "ctx" nor the "flags".
The map feature will need to match acl patterns. This patch extracts
the matching function from the global ACL function "acl_exec_cond".
The code was only moved to its own function, no functional changes were made.
With this split, the pattern indexation can apply to any source. The map
feature needs this functionality because the map cannot be loaded with the
same file format as the ones supported by acl_read_patterns_from_file().
The code was only moved to its own function, no functional changes were made.
The inet_pton function needs an input string with a final \0. This
function copies the input string to a temporary buffer, adds the final
\0 and converts to address.
If the acl keyword is a "fetch", the dedicated parsing function
"sample_parse_expr()" is used. Otherwise, the acl parsing function
"parse_acl_expr()" is extended to understand the syntax of a series
of converters placed after the "fetch" keyword.
Before this patch, each acl uses a "struct sample_fetch" and executes
it with the "<fetch>->process()" function. Now, the dedicated function
"sample_process()" is called.
These syntax are now avalaible:
acl bad req.hdr(host),lower -m str www
http-request redirect prefix /go-away if bad
acl bad hdr_beg(host),lower www
http-request redirect prefix /go-away if bad
