It was noted in #48 that there are times when a configuration
may use the server-template directive with SRV records and
simultaneously want to control weights using an agent-check or
through the runtime api. This patch adds a new option
"ignore-weight" to the "resolve-opts" directive.
When specified, any weight indicated within an SRV record will
be ignored. This is for both initial resolution and ongoing
resolution.
INITCALLs are used a lot in the code now and were not documented, resulting
in each user having to grep for functions in other files. This doc is not
perfect but aims at improving the situation. It documents what's been
available since 1.9 and may be backported there if it helps though it's
unlikely to be needed as it's mostly aimed at developers.
The previous patch on this function (36b536d6c "BUG/MEDIUM: stream-int: Don't
loose events on the CS when an EOS is reported") contains a bug. The return
value is based on the conn-stream's flags. But it may be reset if the CS is
closed. Ironically it was exactly the purpose of this patch...
This patch must be backported to 2.0 and 1.9.
The limitation on the first chunk for chunked requests was true for the legacy
HTTP mode. But, it does not exist with the HTX. Becaue, the legacy HTTP mode was
removed in 2.1, this limitation does not exist anymore.
When no data filter are registered on a channel, if the message length is known,
the HTTP payload is infinitely forwarded to save calls to process_stream(). When
we finally fall back again in XFER_BODY analyzers, we detect the end of the
message by checking channel flags. If CF_EOI or CF_SHUTR is set, we switch the
message in DONE state. For CF_EOI, it is relevant. But not for CF_SHUTR. a
shutdown for reads without the end of input must be interpreted as an abort for
messages with a known length.
Because of this bug, some aborts are not properly handled and reported. Instead,
we interpret it as a legitimate shutdown.
This patch must be backported to 2.0.
There are two issues with the way tunnel mode is detected on the response
path. First, when a response with an unknown content length is handled, the
request is also switched in tunnel mode. It is obviously wrong. Because it was
done on the server side only (so not during the request parsing), it is no
noticeable effects.
The second issue is about the way protocol upgrades are handled. The request is
switched in tunnel mode from the time the 101 response is processed. So an
unfinished request may be switched in tunnel mode too early. It is not a common
use, but a protocol upgrade on a POST is allowed. Thus, parsing of the payload
may be hijacked. It is especially bad for chunked payloads.
Now, conditions to switch the request in tunnel mode reflect what should be
done. Especially for the second issue. We wait the end of the request to switch
it in tunnel mode.
This patch must be backported to 2.0 and 1.9. Note that these versions are only
affected by the second issue but the patch cannot be easily splitted.
Some BUG_ON() tests emit a warning because of a potential null pointer
dereference on an HTX block. In fact, it should never happen, but now, GCC is
happy.
This patch must be backported to 2.0.
By passing the parameter "no-maint" in the query-string, it is now possible to
ignore servers in maintenance. It means that the metrics for servers in this
state will not be exported.
Now, the prometheus exporter parses the HTTP query-string to filter or to adapt
the exported metrics. In this first version, it is only possible select the
scopes of metrics to export. To do so, one or more parameters with "scope" as
name must be passed in the query-string, with one of those values: global,
frontend, backend, server or '*' (means all). A scope parameter with no value
means to filter out all scopes (nothing is returned). The scope parameters are
parsed in their appearance order in the query-string. So an empty scope will
reset all scopes already parsed. But it can be overridden by following scope
parameters in the query-string. By default everything is exported.
The filtering can also be done on prometheus scraping configuration, but general
aim is to optimise the source of data to improve load and scraping time. This is
particularly true for huge configuration with thousands of backends and servers.
Also note that this configuration was possible on the previous official haproxy
exporter but with even more parameters to select the needed metrics. Here we
thought it was sufficient to simply avoid a given type of metric. However, more
filters are still possible.
Thanks to William Dauchy. This patch is based on his work.
In si_cs_recv(), when a shutdown for reads is handled, the conn-stream may be
closed. It happens when the ouput channel is closed for writes or if
SI_FL_NOHALF is set on the stream-interface. In this case, conn-stream's flags
are reset. Thus, if an error (CS_FL_ERROR) or an end of input (CS_FL_EOI) is
reported by the mux, the event is lost. si_cs_recv() does not report these
events by itself. It relies on si_cs_process() to report them to the
stream-interface and/or the channel.
For instance, if CS_FL_EOS and CS_FL_EOI are set by the H1 multiplexer during a
call to si_cs_recv() on the server side, if the conn-stream is closed (read0 +
SI_FL_NOHALF), the CS_FL_EOI flag is lost. Thus, this may lead the stream to
interpret it as a server abort.
Now, conn-stream's flags are processed at the end of si_cs_recv(). The function
is responsible to set the right flags on the stream-interface and/or the
channel. Due to this patch, the function is now almost linear. Except some early
checks at the beginning, there is only one return statement. It also fixes a
potential bug because of an inconsistency between the splicing and the buffered
receipt. On the first case, CS_FL_EOS if handled before errors on the connection
or the conn-stream. On the second one, it is the opposite.
This patch must be backported to 2.0 and 1.9.
There is a compiler warning after commit a9363eb6 ("BUG/MEDIUM: ssl:
'tune.ssl.default-dh-param' value ignored with openssl > 1.1.1"):
src/ssl_sock.c: In function 'ssl_sock_prepare_ctx':
src/ssl_sock.c:4481:4: error: statement with no effect [-Werror=unused-value]
Fix it by adding a (void)
The peer flags (->flags member of peer struct) are reset by __peer_session_deinit()
function. PEER_F_ALIVE flag which is used by the heartbeat part of the peer protocol
to mark a peer as being alive was not reset by this function. This simple patch adds
add the statement to this.
Note that, at this time, there was no identified issue due to this missing reset.
Must be backported to 2.0.
Upon a reexec_on_failure, if the process tried to exit after the
initialization of the process structure but before it was filled with a
PID, the PID in the mworker_proc structure is set to -1.
In this particular case the -sf argument is filled with -1 and haproxy
will exit with the usage message because of that argument.
Should be backported in 2.0.
This patch introduces the new CLI command 'abort ssl cert' which abort
an on-going transaction and free its content.
This command takes the name of the filename of the transaction as an
argument.
As the peers protocol expects to parse at least one encoded integer value for
each stick-table data field even when not configured on the local side,
about the "server_name" data field we must emit something even if it has
not been set (no server was configured for instance).
As this data field is made of first one encoded integer which is the length
of the remaining data (the dictionary cache entry), we encode the length 0
when emitting such an absent dictionary cache entry.
On the remote side, when we decode such an integer with 0 as value, we stop
parsing the data field and that's it.
Must be backported to 2.0.
This patch adds three counters to help in debugging peers protocol issues
to "peer" struct:
->no_hbt counts the number of reconnection period without receiving heartbeat
->new_conn counts the number of reconnections after ->reconnect timeout expirations.
->proto_err counts the number of protocol errors.
Add RX/TX heartbeat counters to "peer" struct to have an idead about which
peer is alive or not.
Dump these counters values on the CLI via "show peers" command.
This patch enable us to dump the stick-table information of remote or local peers
without already opened peer session. This may be the case also for the local peer
during synchronizations with an old processus (reload).
Certificate selection in client_hello_cb (openssl >= 1.1.1) correctly
handles crt-list neg filter. Certificate selection for openssl < 1.1.1
has not been touched for a while: crt-list neg filter is not the same
than his counterpart and is wrong. Fix it to mimic the same behavior
has is counterpart.
It should be backported as far as 1.6.
With CLI cert update, sni_ctx can be removed at runtime. ssl_pkey_info_index
ex_data is filled with one of sni_ctx.kinfo pointer but SSL_CTX can be shared
between sni_ctx. Remove and free a sni_ctx can lead to a segfault when
ssl_pkey_info_index ex_data is used (in ssl_sock_get_pkey_algo). Removing the
dependency on ssl_pkey_info_index ex_data is the easiest way to fix the issue.
since the introduction of mworker, the setuid/setgid was duplicated in
two places; try to improve that by creating a dedicated function.
this patch does not introduce any functional change.
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
in mworker mode used with uid/gid settings, it was not possible to get
a coredump despite the set-dumpable option.
indeed prctl(2) manual page specifies the dumpable attribute is reverted
to `/proc/sys/fs/suid_dumpable` in a few conditions such as process
effective user and group are changed.
this patch moves the whole set-dumpable logic before the polling code in
order to catch all possible cases where we could have changed the
uid/gid. It however does not cover the possible segfault at startup.
this patch should be backported in 2.0.
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
Released version 2.1-dev5 with the following main changes :
- BUG/MEDIUM: ssl/cli: don't alloc path when cert not found
- BUG/MINOR: ssl/cli: unable to update a certificate without bundle extension
- BUG/MINOR: ssl/cli: fix an error when a file is not found
- MINOR: ssl/cli: replace the default_ctx during 'commit ssl cert'
- DOC: fix date and http_date keywords syntax
- MINOR: peers: Add "log" directive to "peers" section.
- BUG/MEDIUM: mux-h1: Disable splicing for chunked messages
- BUG/MEDIUM: stream: Be sure to support splicing at the mux level to enable it
- MINOR: flt_trace: Rename macros to print trace messages
- MINOR: trace: Add a set of macros to trace events if HA is compiled with debug
- MEDIUM: stream/trace: Register a new trace source with its events
- MINOR: doc: http-reuse connection pool fix
- BUG/MEDIUM: stream: Be sure to release allocated captures for TCP streams
- MINOR: http-ana: Remove the unused function http_reset_txn()
- BUG/MINOR: action: do-resolve now use cached response
- BUG: dns: timeout resolve not applied for valid resolutions
- DOC: management: fix typo on "cache_lookups" stats output
- BUG/MINOR: stream: init variables when the list is empty
- BUG/MEDIUM: tasks: Make tasklet_remove_from_tasklet_list() no matter the tasklet.
- BUG/MINOR: queue/threads: make the queue unlinking atomic
- BUG/MEDIUM: Make sure we leave the session list in session_free().
- CLEANUP: session: slightly simplify idle connection cleanup logic
- MINOR: memory: also poison the area on freeing
- CLEANUP: cli: use srv_shutdown_streams() instead of open-coding it
- CLEANUP: stats: use srv_shutdown_streams() instead of open-coding it
- BUG/MEDIUM: listeners: always pause a listener on out-of-resource condition
- BUILD: contrib/da: remove an "unused" warning
- BUG/MEDIUM: filters: Don't call TCP callbacks for HTX streams
- MEDIUM: filters: Adapt filters API to allow again TCP filtering on HTX streams
- MINOR: freq_ctr: Make the sliding window sums thread-safe
- MINOR: stream: Remove the lock on the proxy to update time stats
- MINOR: counters: Add fields to store the max observed for {q,c,d,t}_time
- MINOR: stats: Report max times in addition of the averages for sessions
- MINOR: contrib/prometheus-exporter: Report metrics about max times for sessions
- BUG/MINOR: contrib/prometheus-exporter: Rename some metrics
- MINOR: contrib/prometheus-exporter: report the number of idle conns per server
- DOC: Add missing stats fields in the management manual
- BUG/MINOR: mux-h1: Properly catch parsing errors on payload and trailers
- BUG/MINOR: mux-h1: Don't set CS_FL_EOS on a read0 when receiving data to pipe
- MINOR: mux-h1: Set EOI on the conn-stream when EOS is reported in TUNNEL state
- MINOR: sink: Set the default max length for a message to BUFSIZE
- MINOR: ring: make the parse function automatically set the handler/release
- BUG/MINOR: log: make "show startup-log" use a ring buffer instead
- MINOR: stick-table: allow sc-set-gpt0 to set value from an expression
Allow the sc-set-gpt0 action to set GPT0 to a value dynamically evaluated from
its <expr> argument (in addition to the existing static <int> alternative).
The copy of the startup logs used to rely on a re-allocated memory area
on the fly, that would attempt to be delivered at once over the CLI. But
if it's too large (too many warnings) it will take time to start up, and
may not even show up on the CLI as it doesn't fit in a buffer.
The ring buffer infrastructure solves all this with no more code, let's
switch to this instead. It simply requires a parsing function to attach
the ring via ring_attach_cli() and all the rest is automatically handled.
Initially this was imagined as a code cleanup, until a test with a config
involving 100k backends and just one occurrence of
"load-server-state-from-file global" in the defaults section took approx
20 minutes to parse due to the O(N^2) cost of concatenating the warnings
resulting in ~1 TB of data to be copied, while it took only 0.57s with
the ring.
Ideally this patch should be backported to 2.0 and 1.9, though it relies
on the ring infrastructure which will then also need to be backported.
Configs able to trigger the bug are uncommon, so another workaround for
older versions without backporting the rings would consist in simply
limiting the size of the error message in print_message() to something
always printable, which will only return the first errors.
ring_attach_cli() is called by the keyword parsing function to dump a
ring to the CLI. It can only work with a specific handler and release
function. Let's make it set them appropriately instead of having the
caller know these functions. This way adding a command to dump a ring
is as simple as declaring a parsing function calling ring_attach_cli().
It was set to MAX_SYSLOG_LEN (1K). It is a bit short to print debug
traces. Especially when part of a buffers is dump. Now, the maximum length is
set to BUFSIZE (16K).
This is mandatory to process input one more time to add the EOM in the HTX
message and to set CS_FL_EOI on the conn-stream. Otherwise, in the stream, a
SHUTR will be reported on the corresponding channel without the EOI. It may be
erroneously interpreted as an abort.
This patch must be backported to 2.0 and 1.9.
Errors during the payload or the trailers parsing are reported with the
HTX_FL_PARSING_ERROR flag on the HTX message and not a negative return
value. This change was introduced when the fonctions to convert an H1 message to
HTX one were moved to a dedicated file. But the h1 mux was not fully updated
accordingly.
No backport needed except if the commits about file h1_htx.c are backported.
This adds two extra metrics per server, one for the current number of idle
connections and one for the configured limit :
* haproxy_server_idle_connections_current
* haproxy_server_idle_connections_limit
The following metrics have been renamed without the "_http" part :
* http_queue_time_average_seconds => queue_time_average_seconds
* http_connect_time_average_seconds => connect_time_average_seconds
* http_response_time_average_seconds => response_time_average_seconds
* http_total_time_average_seconds => total_time_average_seconds
These metrics are reported per backend and per server and are not specific to
HTTP sessions.
Now, for the sessions, the maximum times (queue, connect, response, total) are
reported in addition of the averages over the last 1024 connections. These
metrics are reported per backend and per server. Here are the metrics name :
* haproxy_backend_max_queue_time_seconds
* haproxy_backend_max_connect_time_seconds
* haproxy_backend_max_response_time_seconds
* haproxy_backend_max_total_time_seconds
and
* haproxy_server_max_queue_time_seconds
* haproxy_server_max_connect_time_seconds
* haproxy_server_max_response_time_seconds
* haproxy_server_max_total_time_seconds
This patch is related to #272.
Now, for the sessions, the maximum times (queue, connect, response, total) are
reported in addition of the averages over the last 1024 connections. These
values are called qtime_max, ctime_max, rtime_max and ttime_max.
This patch is related to #272.
For backends and servers, some average times for last 1024 connections are
already calculated. For the moment, the averages for the time passed in the
queue, the connect time, the response time (for HTTP session only) and the total
time are calculated. Now, in addition, the maximum time observed for these
values are also stored.
In addition, These new counters are cleared as all other max values with the CLI
command "clear counters".
This patch is related to #272.
This change make the payload filtering uniform between TCP and HTTP
filters. Now, in TCP, like in HTTP, there is only one callback responsible to
forward data. Thus, old callbacks, tcp_data() and tcp_forward_data(), are
replaced by a single callback function, tcp_payload(). This new callback gets
the offset in the payload to (re)start the filtering and the maximum amount of
data it can forward. It is the filter's responsibility to be compatible with HTX
streams. If not, it must not set the flag FLT_CFG_FL_HTX.
Because of this change, nxt and fwd offsets are no longer needed. Thus they are
removed from the filter structure with their update functions,
flt_change_next_size() and flt_change_forward_size(). Moreover, the trace filter
has been updated accordingly.
This patch breaks the compatibility with the old API. Thus it should probably
not be backported. But, AFAIK, there is no TCP filter, thus the breakage is very
limited.
For now, TCP callbacks are incompatible with the HTX streams because they are
designed to manipulate raw buffers. A new callback will probably be added to be
used in both modes, raw and HTX. So, for HTX streams, these callbacks are
ignored. This should not be a real problem because there is no known filters,
expect the trace filter, implementing these callbacks.
This patch must be backported to 2.0 and 1.9.
The rcsid variable is static an unused, causing a build warning. Let's
just add __attribute__((unused)) to shut the warning.
This may be backported to 2.0.
A corner case was opened in the listener_accept() code by commit 3f0d02bbc2
("MAJOR: listener: do not hold the listener lock in listener_accept()"). The
issue is when one listener (or a group of) managed to eat all the proxy's or
all the process's maxconn, and another listener tries to accept a new socket.
This results in the atomic increment to detect the excess connection count
and immediately abort, without pausing the listener, thus the call is
immediately performed again. This doesn't happen when the test is run on a
single listener because this listener got limited when crossing the limit.
But with 2 or more listeners, we don't have this luxury.
The solution consists in limiting the listener as soon as we have to
decline accepting an incoming connection. This means that the listener
will not be marked full yet if it gets the exact connection count but
this is not a problem in practice since all other listeners will only be
marked full after their first attempt. Thus from now on, a listener is
only full once it has already failed taking an incoming connection.
This bug was definitely responsible for the unreproduceable occasional
reports of high CPU usage showing epoll_wait() returning immediately
without accepting an incoming connection, like in bug #129.
This fix must be backported to 1.9 and 1.8.
The "shutdown sessions" admin-mode command used to open-code the list
traversal while there's already a function for this: srv_shutdown_streams().
Better use it.
The "shutdown session server" command used to open-code the list traversal
while there's already a function for this: srv_shutdown_streams(). Better
use it.
Since previous commit a132e5efa9 ("BUG/MEDIUM: Make sure we leave the
session list in session_free().") it's pointless to delete the conn
element inside "if" blocks given that the second test is always true
as well. Let's simplify this with a single LIST_DEL_INIT() before the
test.
In session_free(), if we're about to destroy a connection that had no mux,
make sure we leave the session_list before calling conn_free(). Otherwise,
conn_free() would call session_unown_conn(), which would potentially free
the associated srv_list, but session_free() also frees it, so that would
lead to a double free, and random memory corruption.
This should be backported to 1.9 and 2.0.
There is a very short race in the queues which happens in the following
situation:
- stream A on thread 1 is being processed by a server
- stream B on thread 2 waits in the backend queue for a server
- stream B on thread 2 is fed up with waiting and expires, calls
stream_free() which calls pendconn_free(), which sees the
stream attached
- at the exact same instant, stream A finishes on thread 1, sees
one stream is waiting (B), detaches it and wakes it up
- stream B continues pendconn_free() and calls pendconn_unlink()
- pendconn_unlink() now detaches the node again and performs a
second deletion (harmless since idempotent), and decrements
srv/px->nbpend again
=> the number of connections on the proxy or server may reach -1 if/when
this race occurs.
It is extremely tight as it can only occur during the test on p->leaf_p
though it has been witnessed at least once. The solution consists in
testing leaf_p again once the lock is held to make sure the element was
not removed in the mean time.
This should be backported to 2.0 and 1.9, probably even 1.8.
In tasklet_remove_from_tasket_list(), we can be called for a tasklet that is
either in the private task list, or in the shared tasklet list. Take that into
account and always use MT_LIST_DEL() to remove it, otherwise if we're in the
shared list and another thread attempts to add a tasklet in it, bad things
will happen.
__tasklet_remove_from_tasklet_list() is left unchanged, it's only supposed
to be used by process_runnable_task() to remove task/tasklets from the private
tast list.
This should not be backported.
This should fix github issue #357.
We need to call vars_init() when the list is empty otherwise we
can't use variables in the response scope. This regression was
introduced by cda7f3f5 (MINOR: stream: don't prune variables if
the list is empty).
The following config reproduces the issue:
defaults
mode http
frontend in
bind *:11223
http-request set-var(req.foo) str("foo") if { path /bar }
http-request set-header bar %[var(req.foo)] if { var(req.foo) -m found }
http-response set-var(res.bar) str("bar")
http-response set-header foo %[var(res.bar)] if { var(res.bar) -m found }
use_backend out
backend out
server s1 127.0.0.1:11224
listen back
bind *:11224
http-request deny deny_status 200
> GET /ba HTTP/1.1
> Host: localhost:11223
> User-Agent: curl/7.66.0
> Accept: */*
>
< HTTP/1.0 200 OK
< Cache-Control: no-cache
< Content-Type: text/html
> GET /bar HTTP/1.1
> Host: localhost:11223
> User-Agent: curl/7.66.0
> Accept: */*
>
< HTTP/1.0 200 OK
< Cache-Control: no-cache
< Content-Type: text/html
< foo: bar
This must be backported as far as 1.9.
