Support the same syntax in master mode as in worker mode in order to
configure the prompt. The only thing is that for now the master doesn't
have a non-interactive mode and it doesn't seem necessary to implement
it, so we only support the interactive and prompt modes. However the code
was written in a way that makes it easy to change this later if desired.
Now the prompt mode can more finely be configured between non-interactive
(default), interactive without prompt, and interactive with prompt. This
will ease the usage from automated tools which are not necessarily
interested in having to consume '> ' after each command nor displaying
"+" on payload lines. This can also be convenient when coming from the
master CLI to keep the same output format.
The CLI's "prompt" command toggles two distinct things:
- displaying or hiding the prompt at the beginning of the line
- single-command vs interactive mode
These are two independent concepts and the prompt mode doesn't
always cope well with tools that would like to upload data without
having to read the prompt on return. Also, the master command line
works in interactive mode by default with no prompt, which is not
consistent (and not convenient for tools). So let's start by splitting
the bit in two, and have a new APPCTX_CLI_ST1_INTER flag dedicated
to the interactive mode. For now the "prompt" command alone continues
to toggle the two at once.
We add __equals_0(NAME) which is only true if NAME is defined as zero,
and __def_as_empty(NAME) which is only true if NAME is defined as an
empty string.
Generate the private key on the account file when the file does not
exists. This generate a private key of the type and parameters
configured in the acme section.
Setting DEBUG_THREAD to 1 allows recording the lock history for each
thread. Tests have shown that (as predicted) the cost of updating a
single thread-local variable is not perceptible in the noise, especially
when compared to the cost of obtaining a lock. Since this can provide
useful value when debugging deadlocks, let's enable it by default when
threads are enabled.
This will display the lock labels and modes for each non-empty step
at the end of "show threads" when these are defined. This allows to
emit up to the last 8 locking operation for each thread on 64 bit
machines.
by only storing a word in each thread context, we can keep the history
of all taken/dropped locks by label. This is expected to be very cheap
and to permit to store up to 8 consecutive lock operations in 64 bits.
That should significantly help detect recursive locks as well as figure
what thread was likely to hinder another one waiting for a lock.
For now we only store the final state of the lock, we don't store the
attempt to get it. It's just a matter of space since we already need
4 ops (rd,sk,wr,un) which take 2 bits, leaving max 64 labels. We're
already around 45. We could also multiply by 5 and still keep 8 bits
total per lock, that would limit us to 51 locks max. It seems that
most of the time if we get a watchdog panic, anyway the victim thread
will be perfectly located so that we don't need a specific value for
this. Another benefit is that we perform a single memory write per
lock.
We now default the value to zero and make sure all tests properly take
care of values above zero. This is in preparation for supporting several
degrees of debugging.
Machines lacking CAS8B/DWCAS and emit a warning in lb_fwlc.c without
threads due to declaration ordering. Let's just move the variable
declaration into the block that uses it as a last variable. No
backport is needed.
Not all systems have strndup(), that's why we have our "my_strndup()",
so let's make use of it here. This fixes the build on Solaris 10. No
backport is needed.
It has been requested to have the current_session_rate exposed at the
frontend level. For now only the per-process value was exposed
(ST_I_INF_SESS_RATE).
Thanks to the work done lately to merge promex and stat_cols_px[]
array, let's simply defined an .alt_name for the ST_I_PX_RATE metric in
order to have promex exposing it as current_session_rate for relevant
contexts.
log-forward "host" option may be confusing because we often mention the
host field when talking about syslog RFC3164 or RFC5424 messages, but
neither rfc actually define "host" field. In fact, everywhere we used
"host field" we actually meant "hostname field" as documented in RFC5424.
This was a language abuse on our side.
In this patch we replace "host" with "hostname" where relevant in the
documentation to prevent confusion.
Thanks to Nick Ramirez for having reported the issue.
Nick Ramirez reported that the ACME paragraph (3.13) caused a rendering
issue where simple text was rendered as a directive. This was caused
by the use of unescaped <name> which confuses dconv.
Let's escape <name> by putting quotes around it to prevent the rendering
issue.
No backport needed.
Add a -t option to 'show ssl sni', allowing to add an offset to the
current date so it would allow to check which certificates are expired
after a certain period of time.
Since we made it possible for a bind_conf to listen to multiple thread
groups with shards in 2.8 with commit 9d360604bd ("MEDIUM: listener:
rework thread assignment to consider all groups"), the per-listener
connection count was not properly transferred to the target listener
with the connection when switching to another thread group. This results
in one listener possibly reaching high values and another one possibly
reaching negative values. Usually it's not visible, unless a maxconn is
set on the bind_conf, in which case comparisons will quickly put an end
to the willingness to accept new connections.
This problem only happens when thread groups are enabled, and it seems
very hard to trigger it normally, it only impacts sockets having a single
shard, hence currently the CLI (or any conf with "bind ... shards 1"),
where it can be reproduced with a config having a very low "maxconn" on
the stats socket directive (here, 4), and issuing a few tens of
socat <<< "show activity" in parallel, or sending HTTP connections to a
single-shared listener. Very quickly, haproxy stops accepting connections
and eats CPU in the poller which tries to get its connections accepted.
A BUG_ON(l->nbconn<0) after HA_ATOMIC_DEC() in listener_release() also
helps spotting them better.
Many thanks to Christian Ruppert who once again provided a very accurate
report in GH #2951 with the required data permitting this analysis.
This fix must be backported to 2.8.
tasklets were originally designed to alway run on only one thread, so it
was not possible to have it run on 2 threads concurrently.
The API has been extended so that another thread may wake the tasklet,
the idea was still that we wanted to have it run on one thread only.
However, the way it's been done meant that unless a tasklet was bound to
a specific tid with tasklet_set_tid(), or we explicitely used
tasklet_wakeup_on() to specify the thread for the target to run on, it
would be scheduled to run on the current thread.
This is in fact a desirable feature. There is however a race condition
in which the tasklet would be scheduled on a thread, while it is running
on another. This could lead to the same tasklet to run on multiple
threads, which we do not want.
To fix this, just do what we already do for regular tasks, set the
"TASK_RUNNING" flag, and when it's time to execute the tasklet, wait
until that flag is gone.
Only one case has been found in the current code, where the tasklet
could run on different threads depending on who wakes it up, in the
leastconn load balancer, since commit
627280e15f.
It should not be a problem in practice, as the function called can be
called concurrently.
If a bug is eventually found in relation to this problem, and this patch
should be backported, the following patches should be backported too :
MEDIUM: quic: Make sure we return the tasklet from quic_accept_run
MEDIUM: quic: Make sure we return NULL in quic_conn_app_io_cb if needed
MEDIUM: quic: Make sure we return the tasklet from qcc_io_cb
MEDIUM: mux_fcgi: Make sure we return the tasklet from fcgi_deferred_shut
MEDIUM: listener: Make sure w ereturn the tasklet from accept_queue_process
MEDIUM: checks: Make sure we return the tasklet from srv_chk_io_cb
In quic_conn_app_io_cb, make sure we return NULL if the tasklet has been
destroyed, so that the scheduler knows. It is not yet needed, but will
be soon.
Released version 3.2-dev12 with the following main changes :
- BUG/MINOR: quic: do not crash on CRYPTO ncbuf alloc failure
- BUG/MINOR: proxy: always detach a proxy from the names tree on free()
- CLEANUP: proxy: detach the name node in proxy_free_common() instead
- CLEANUP: Slightly reorder some proxy option flags to free slots
- MINOR: proxy: Add options to drop HTTP trailers during message forwarding
- MINOR: h1-htx: Skip C-L and T-E headers for 1xx and 204 messages during parsing
- MINOR: mux-h1: Keep custom "Content-Length: 0" header in 1xx and 204 messages
- MINOR: hlua/h1: Use http_parse_cont_len_header() to parse content-length value
- CLEANUP: h1: Remove now useless h1_parse_cont_len_header() function
- BUG/MEDIUM: mux-spop: Respect the negociated max-frame-size value to send frames
- MINOR: http-act: Add 'pause' action to temporarily suspend the message analysis
- MINOR: acme/cli: add the 'acme renew' command to the help message
- MINOR: httpclient: add an "https" log-format
- MEDIUM: acme: use a customized proxy
- MEDIUM: acme: rename "uri" into "directory"
- MEDIUM: acme: rename "account" into "account-key"
- MINOR: stick-table: use a separate lock label for updates
- MINOR: h3: simplify h3_rcv_buf return path
- BUG/MINOR: mux-quic: fix possible infinite loop during decoding
- BUG/MINOR: mux-quic: do not decode if conn in error
- BUG/MINOR: cli: Issue an error when too many args are passed for a command
- MINOR: cli: Use a full prompt command for bidir connections with workers
- MAJOR: cli: Refacor parsing and execution of pipelined commands
- MINOR: cli: Rename some CLI applet states to reflect recent refactoring
- CLEANUP: applet: Update st0/st1 comment in appctx structure
- BUG/MINOR: hlua: Fix I/O handler of lua CLI commands to not rely on the SC
- BUG/MINOR: ring: Fix I/O handler of "show event" command to not rely on the SC
- MINOR: cli/applet: Move appctx fields only used by the CLI in a private context
- MINOR: cache: Add a pointer on the cache in the cache applet context
- MINOR: hlua: Use the applet name in error messages for lua services
- MINOR: applet: Save the "use-service" rule in the stream to init a service applet
- CLEANUP: applet: Remove unsued rule pointer in appctx structure
- BUG/MINOR: master/cli: properly trim the '@@' process name in error messages
- MEDIUM: resolvers: add global "dns-accept-family" directive
- MINOR: resolvers: add command-line argument -4 to force IPv4-only DNS
- MINOR: sock-inet: detect apparent IPv6 connectivity
- MINOR: resolvers: add "dns-accept-family auto" to rely on detected IPv6
- MEDIUM: acme: use Retry-After value for retries
- MEDIUM: acme: reset the remaining retries
- MEDIUM: acme: better error/retry management of the challenge checks
- BUG/MEDIUM: cli: Handle applet shutdown when waiting for a command line
- Revert "BUG/MINOR: master/cli: properly trim the '@@' process name in error messages"
- BUG/MINOR: master/cli: only parse the '@@' prefix on complete lines
- MINOR: resolvers: use the runtime IPv6 status instead of boot time one
On systems where the network is not reachable at boot time (certain HA
systems for example, or dynamically addressed test machines), we'll want
to be able to periodically revalidate the IPv6 reachability status. The
current code makes it complicated because it sets the config bits once
for all at boot time. This commit changes this so that the config bits
are not changed, but instead we rely on a static inline function that
relies on sock_inet6_seems_reachable for every test (really cheap). This
also removes the now unneeded resolvers late init code.
This variable for now is still set at boot time but this will ease the
transition later, as the resolvers code is now ready for this.
The new adhoc parser for the '@@' prefix forgot to require the presence
of the LF character marking the end of the line. This is the reason why
entering incomplete commands would display garbage, because the line was
expected to have its LF character replaced with a zero.
The problem is well illustrated by using socat in raw mode:
socat /tmp/master.sock STDIO,raw,echo=0
then entering "@@1 show info" one character at a time would error just
after the second "@". The command must take care to report an incomplete
line and wait for more data in such a case.
This reverts commit 0e94339eaf.
This patch was in fact fixing the symptom, not the cause. The root cause
of the problem is that the parser was processing an incomplete line when
looking for '@@'. When the LF is present, this problem does not exist
as it's properly replaced with a zero. This can be verified using socat
in raw mode:
socat /tmp/master.sock STDIO,raw,echo=0
Then entering "@@1 show info" one character at a time will immediately
fail on "@@" without going further. A subsequent patch will fix this.
No backport is needed.
When the CLI applet was refactord in the commit 20ec1de21 ("MAJOR: cli:
Refacor parsing and execution of pipelined commands"), a regression was
introduced. The applet shutdown was not longer handled when the applet was
waiting for the next command line. It is especially visible when a client
timeout occurred because the client connexion is no longer closed.
To fix the issue, the test on the SE_FL_SHW flag was reintroduced in
CLI_ST_PARSE_CMDLINE state, but only is there is no pending input data.
It is a 3.2-specific issue. No backport needed.
When the ACME task is checking for the status of the challenge, it would
only succeed or retry upon failure.
However that's not the best way to do it, ACME objects contain an
"status" field which could have a final status or a in progress status,
so we need to be able to retry.
This patch adds an acme_ret enum which contains OK, RETRY and FAIL.
In the case of the CHKCHALLENGE, the ACME could return a "pending" or a
"processing" status, which basically need to be rechecked later with the
RETRY. However a "invalid" or "valid" status is final and will return
either a FAIL or a OK.
So instead of retrying in any case, the "invalid" status will ends the
task with an error.
Parse the Retry-After header in response and store it in order to use
the value as the next delay for the next retry, fallback to 3s if the
value couldn't be parse or does not exist.
Instead of always having to force IPv4 or IPv6, let's now also offer
"auto" which will only enable IPv6 if the system has a default gateway
for it. This means that properly configured dual-stack systems will
default to "ipv4,ipv6" while those lacking a gateway will only use
"ipv4". Note that no real connectivity test is performed, so firewalled
systems may still get it wrong and might prefer to rely on a manual
"ipv4" assignment.
In order to ease dual-stack deployments, we could at least try to
check if ipv6 seems to be reachable. For this we're adding a test
based on a UDP connect (no traffic) on port 53 to the base of
public addresses (2001::) and see if the connect() is permitted,
indicating that the routing table knows how to reach it, or fails.
Based on this result we're setting a global variable that other
subsystems might use to preset their defaults.
In order to ease troubleshooting and testing, the new "-4" command line
argument enforces queries and processing of "A" DNS records only, i.e.
those representing IPv4 addresses. This can be useful when a host lack
end-to-end dual-stack connectivity. This overrides the global
"dns-accept-family" directive and is equivalent to value "ipv4".
By default, DNS resolvers accept both IPv4 and IPv6 addresses. This can be
influenced by the "resolve-prefer" keywords on server lines as well as the
family argument to the "do-resolve" action, but that is only a preference,
which does not block the other family from being used when it's alone. In
some environments where dual-stack is not usable, stumbling on an unreachable
IPv6-only DNS record can cause significant trouble as it will replace a
previous IPv4 one which would possibly have continued to work till next
request. The "dns-accept-family" global option permits to enforce usage of
only one (or both) address families. The argument is a comma-delimited list
of the following words:
- "ipv4": query and accept IPv4 addresses ("A" records)
- "ipv6": query and accept IPv6 addresses ("AAAA" records)
When a single family is used, no request will be sent to resolvers for the
other family, and any response for the othe family will be ignored. The
default value is "ipv4,ipv6", which effectively enables both families.
When '@@' alone is sent on the master CLI (no trailing LF), we get an
error that displays anything past these two characters in the buffer
since there's no room for a \0. Let's make sure to limit the length of
the process name in this case. No backport is needed since this was added
with 00c967fac4 ("MINOR: master/cli: support bidirectional communications
with workers").
When a service is initialized, the "use-service" rule that was executed is
now saved in the stream, using "current_rule" field, instead of saving it
into the applet context. It is safe to do so becaues this field is unused at
this stage. To avoid any issue, it is reset after the service
initialization. Doing so, it is no longer necessary to save it in the applet
context. It was the last usage of the rule pointer in the applet context.
The init functions for TCP and HTTP lua services were updated accordingly.
The lua function name was used in error messages of HTTP/TCP lua services
while the applet name can be used. Concretely, this will not change
anything, because when a lua service is regiestered, the lua function name
is used to name the applet. But it is easier, cleaner and more logicial
because it is really the applet name that should be displayed in these error
messages.
Thanks to this change, when a response is delivered from the cache, it is no
longer necessary to get the cache filter configuration from the http
"use-cache" rule saved in the appctx to get the currently used cache. It was
a bit complex to get an info that can be directly and naturally stored in
the cache applet context.
There are several fields in the appctx structure only used by the CLI. To
make things cleaner, all these fields are now placed in a dedicated context
inside the appctx structure. The final goal is to move it in the service
context and add an API for cli commands to get a command coontext inside the
cli context.
Thanks to the CLI refactoring ("MAJOR: cli: Refacor parsing and execution of
pipelined commands"), it is possible to fix "show event" I/O handle function
to no longer use the SC.
When the applet API was refactored to no longer manipulate the channels or
the stream-connectors, this part was missed. However, without the patch
above, it could not be fixed. It is now possible so let's do it.
This patch must not be backported becaues it depends on refactoring of the
CLI applet.
Thanks to the CLI refactoring ("MAJOR: cli: Refacor parsing and execution of
pipelined commands"), it is possible to fix the I/O handler function used by
lua CLI commands to no longer use the SC.
When the applet API was refactored to no longer manipulate the channels or
the stream-connectors, this part was missed. However, without the patch
above, it could not be fixed. It is now possible so let's do it.
This patch must not be backported becaues it depends on refactoring of the
CLI applet.
CLI_ST_GETREQ state was renamed into CLI_ST_PARSE_CMDLINE and CLI_ST_PARSEREQ
into CLI_ST_PROCESS_CMDLINE to reflect the real action performed in these
states.
