The listener struct is now aware of the socket layer to use upon accept().
At the moment, only sock_raw is supported so this patch should not change
anything.
When the target is a client, it will be convenient to have a pointer to the
original listener so that we can retrieve some configuration information at
the stream interface level.
We start to move everything needed to manage a connection to a special
entity "struct connection". We have the data layer operations and the
control operations there. We'll also have more info in the future such
as file descriptors and applet contexts, so that in the end it becomes
detachable from the stream interface, which will allow connections to
be reused between sessions.
For now on, we start with minimal changes.
It does not make sense anymore to wait for a session creation to process
a TCP monitor check which only closes the connection and returns. Better
to process this immediately after the accept() return. It also saves us
from counting a connection for monitor checks, which is much more logical.
Calling the init() function in sess_establish was a bad idea, it is
too late to allow it to fail on lack of resource and does not help at
all. Remove it for now before it's used.
This flag indicates that we're not interested in keeping half-open
connections on a stream interface. It has the benefit of allowing
the socket layer to cause an immediate write close when detecting
an incoming read close. This releases resources much faster and
saves one syscall (either a shutdown or setsockopt).
This flag is only set by HTTP on the interface going to the server
since we don't want to continue pushing data there when it has
closed.
Another benefit is that it responds with a FIN to a server's FIN
instead of responding with an RST as it used to, which is much
cleaner.
Performance gains of 7.5% have been measured on HTTP connection
rate on empty objects.
These pointers were used to hold pointers to buffers in the past, but
since we introduced the stream interface, they're no longer used but
they were still sometimes set.
Removing them shrink the struct fdtab from 32 to 24 bytes on 32-bit machines,
and from 52 to 36 bytes on 64-bit machines, which is a significant saving. A
quick tests shows a steady 0.5% performance gain, probably due to the better
cache efficiency.
Tunnel timeouts are used when TCP connections are forwarded, or
when forwarding upgraded HTTP connections (WebSocket) as well as
CONNECT requests to proxies.
This timeout allows long-lived sessions to be supported without
having to set large timeouts to normal requests.
In sess_establish, once we've prepared everythin, we can call the socket layer
init function. We pass an argument for targets which have one (eg: servers). At
the moment, the existing socket layers don't have init functions, but SSL will
need one.
Similarly to the previous patch, we don't need the socket-layer functions
outside of stream_interface. They could even move to a file dedicated to
applets, though that does not seem particularly useful at the moment.
We'll soon have an SSL socket layer, and in order to ease the difference
between the two, we use the name "sock_raw" to designate the one which
directly talks to the sockets without any conversion.
All keywords registered using a cfg_kw_list now make use of the new error reporting
framework. This allows easier and more precise error reporting without having to
deal with complex buffer allocation issues.
Last memory poisonning patch immediately made this issue appear.
The unique_id field is released but not properly initialized. The
feature was introduced very recently, no backport is needed.
Commit b22e55bc introduced send_proxy_ofs but forgot to initialize it,
which remained unnoticed since it's always at the same place in the
stream interface. On a machine with dirty RAM returned by malloc(),
some responses were holding a PROXY header, which normally is not
possible.
The problem goes away after properly initializing the field upon each
new session_accept().
This fix does not need to be backported except if any code makes use of
a backport of this feature.
These operators are used regardless of the socket protocol family. Move
them to a "sock_ops" struct. ->read and ->write have been moved there too
as they have no reason to remain at the protocol level.
This is mainly a massive renaming in the code to get it in line with the
calling convention. Next patch will rename a few files to complete this
operation.
Patterns were using a bitmask to indicate if request or response was desired
in fetch functions and keywords. ACLs were using a bitmask in fetch keywords
and a single bit in fetch functions. ACLs were also using an ACL_PARTIAL bit
in fetch functions indicating that a non-final fetch was performed, which was
an abuse of the existing direction flag.
The change now consists in using :
- a capabilities field for fetch keywords => SMP_CAP_REQ/RES to indicate
if a keyword supports requests, responses, both, etc...
- an option field for fetch functions to indicate what the caller expects
(request/response, final/non-final)
The ACL_PARTIAL bit was reversed to get SMP_OPT_FINAL as it's more explicit
to know we're working on a final buffer than on a non-final one.
ACL_DIR_* were removed, as well as PATTERN_FETCH_*. L4 fetches were improved
to support being called on responses too since they're still available.
The <dir> field of all fetch functions was changed to <opt> which is now
unsigned.
The patch is large but mostly made of cosmetic changes to accomodate this, as
almost no logic change happened.
Having the args everywhere will make it easier to share fetch functions
between patterns and ACLs. The only place where we could have needed
the expr was in the http_prefetch function which can do well without.
This one is not needed anymore as we can return the data and its type in the
sample provided by the caller. ACLs now always return the proper type. BOOL
is already returned when the result is expected to be processed as a boolean.
temp_pattern has been unexported now.
The new sample types are necessary for the acl-pattern convergence.
These types are boolean and signed int. Some types were renamed for
less ambiguity (ip->ipv4, integer->uint).
A large number of ACLs make use of frontend, backend or table names in their
arguments, and fall back to the current proxy when no argument is passed. If
the expected capability is not available, the ACL silently fails at runtime.
Now we make all those names mandatory in the parser and we rely on
acl_find_targets() to replace the missing names with the holding proxy,
then to perform the appropriate tests, and to reject errors at parsing
time.
It is possible that some faulty configurations will get rejected from now
on, while they used to silently fail till now. This is the reason why this
change is marked as MAJOR.
Proxy names are now resolved when the config is parsed and not at runtime.
This means that errors will be caught for real instead of having an ACL
silently never match. Another benefit is that the fetch will be much faster
since the lookup will not have to be performed anymore, eg for all ACLs
based on explicitly named stick-tables.
However some buggy configurations which used to silently fail in the past
will now refuse to load, hence the MAJOR tag.
The types and minimal number of ACL keyword arguments are now stored in
their declaration. This will allow many more fantasies if some ACL use
several arguments or types.
Doing so required to rework all ACL keyword declarations to add two
parameters. So this was a good opportunity for a general cleanup and
to sort all entries in alphabetical order.
We still have two pending issues :
- parse_acl_expr() checks for errors but has no way to report them to
the user ;
- the types of some arguments are still not resolved and kept as strings
(eg: ARGT_FE/BE/TAB) for compatibility reasons, which must be resolved
in acl_find_targets()
The ACL parser now uses the argument parser to build a typed argument list.
Right now arguments are all strings and only one argument is supported since
this is what ACLs currently support.
ACLs and patterns only rely on a struct http_msg and don't know the pointer
to the actual data. struct http_msg will soon only hold relative references
so that's not possible. We need http_msg to hold a reference to the struct
buffer before having relative pointers everywhere.
It is likely that doing so will also result in opportunities to simplify
a number of functions arguments. The following functions are already
candidate :
http_buffer_heavy_realign
http_capture_bad_message
http_change_connection_header
http_forward_trailers
http_header_add_tail
http_header_add_tail2
http_msg_analyzer
http_parse_chunk_size
http_parse_connection_header
http_remove_header2
http_send_name_header
http_skip_chunk_crlf
http_upgrade_v09_to_v10
We don't have buf->l anymore. We have buf->i for pending data and
the total length is retrieved by adding buf->o. Some computation
already become simpler.
Despite extreme care, bugs are not excluded.
It's worth noting that msg->err_pos as set by HTTP request/response
analysers becomes relative to pending data and not to the beginning
of the buffer. This has not been completed yet so differences might
occur when outgoing data are left in the buffer.
Too many flags are stored in the transaction structure. Some flags are
clearly message-specific and exist in two versions (request and response).
Move them to a new "flags" field in the http_message struct instead.
There were a few unchecked write() calls in the debug code that cause
gcc 4.x to emit warnings on recent libc. We don't want to check them
as we can't make anything from the result, let's simply surround them
with an empty if statement.
Note that one of the warnings was for chdir("/") which normally cannot
fail since it follows a successful chroot (which means the perms are
necessarily there). Anyway let's move the call uppe to protect it too.
These callbacks are used to retrieve the source and destination address
of a socket. The address flags are not hold on the stream interface and
not on the session anymore. The addresses are collected when needed.
This still needs to be improved to store the IP and port separately so
that it is not needed to perform a getsockname() when only the IP address
is desired for outgoing traffic.
Sometimes it is desirable to forward a particular request to a specific
server without having to declare a dedicated backend for this server. This
can be achieved using the "use-server" rules. These rules are evaluated after
the "redirect" rules and before evaluating cookies, and they have precedence
on them. There may be as many "use-server" rules as desired. All of these
rules are evaluated in their declaration order, and the first one which
matches will assign the server.
I downloaded version 1.4.19 this morning. While merging the code changes
to a custom build that we have here for our project I noticed a typo in
'session.c', in the new code for inserting the server name in the HTTP
header. The fix that I did is shown in the patch below.
[WT: the bug is harmless, it is only suboptimal]
New option "http-send-name-header" specifies the name of a header which
will hold the server name in outgoing requests. This is the name of the
server the connection is really sent to, which means that upon redispatches,
the header's value is updated so that it always matches the server's name.
All ACL fetches which return integer value now store the result into
the temporary pattern struct. All ACL matches which rely on integer
also get their value there.
Note: the pattern data types are not set right now.
It makes no sense to have one pointer to the hdr_idx pool in each proxy
struct since these pools do not depend on the proxy. Let's have a common
pool instead as it is already the case for other types.
Stream interfaces used to distinguish between client and server addresses
because they were previously of different types (sockaddr_storage for the
client, sockaddr_in for the server). This is not the case anymore, and this
distinction is confusing at best and has caused a number of regressions to
be introduced in the process of converting everything to full-ipv6. We can
now remove this and have a much cleaner code.
We already had the ability to kill a connection, but it was only
for the checks. Now we can do this for any session, and for this we
add a specific flag "K" to the logs.
Instead of waking a listener up then making it sleep, we only wake them up
if we know their rate limit is fine. In the future we could improve on top
of that by deciding to wake a proxy-specific task in XX milliseconds to
take care of enabling the listeners again.
