We make the peers code use applet->ptr instead of conn->xprt_ctx to
store the pointer to the current peer. That way it does not depend
on a connection anymore.
We're trying to move the applets out of the struct connection. So
let's remove the dependence on xprt_st and introduce si->applet.st2
to store the missing contextual data instead.
The store[] array in the session holds a flag which probably aimed to
differenciate store entries learned from the request from those learned
from the response, and allowing responses to overwrite only the request
ones (eg: have a server set a response cookie which overwrites the request
one).
But this flag is set when a response data is stored, and is never cleared.
So in practice, haproxy always runs with this flag set, meaning that
responses prevent themselves from overriding the request data.
It is desirable anyway to keep the ability not to override data, because
the override is performed only based on the table and not on the key, so
that would mean that it would be impossible to retrieve two different
keys to store into a same table. For example, if a client sets a cookie
and a server another one, both need to be updated in the table in the
proper order. This is especially true when multiple keys may be tracked
on each side into the same table (eg: list of IP addresses in a header).
So the correct fix which also maintains the current behaviour consists in
simply removing this flag and never try to optimize for the overwrite case.
This fix also has the benefit of significantly reducing the session size,
by 64 bytes due to alignment issues caused by this flag!
The bug has been there forever (since 1.4-dev7), so a backport to 1.4
would be appropriate.
In recent commit 5ecb77f (MEDIUM: checks: add send/expect tcp based check),
bitfields were mistakenly used at some places for the actions. Fortunately,
the only two actions right now are 1 and 2 so they don't share any bit in
common and the bug has no impact.
No backport is needed.
This is a generic health check which can be used to match a
banner or send a request and analyse a server response.
It works in a send/expect ways and many exchange can be done between
HAProxy and a server to decide the server status, making HAProxy able to
speak the server's protocol.
It can send arbitrary regular or binary strings and match content as a
regular or binary string or a regex.
Signed-off-by: Baptiste Assmann <bedis9@gmail.com>
This patch permits to use the same struct pattern for two indentical maps.
This permits to preserve memory, and permits to update only one
"struct pattern" when the dynamic map update is supported.
We handle "http-request redirect" with a log-format string now, but we
leave "redirect" unaffected.
Note that the control of the special "/" case is move from the runtime
execution to the configuration parsing. If the format rule list is
empty, the build_logline() function does nothing.
Add a new converter with the following prototype :
map(<map_file>[,<default_value>])
map_<match_type>(<map_file>[,<default_value>])
map_<match_type>_<output_type>(<map_file>[,<default_value>])
It searches the for input value from <map_file> using the <match_type>
matching method, and return the associated value converted to the type
<output_type>. If the input value cannot be found in the <map_file>,
the converter returns the <default_value>. If the <default_value> is
not set, the converter fails and acts as if no input value could be
fetched. If the <match_type> is not set, it defaults to "str".
Likewise, if the <output_type> is not set, it defaults to "str". For
convenience, the "map" keyword is an alias for "map_str" and maps a
string to another string. The following array contains contains the
list of all the map* converters.
+----+----------+---------+-------------+------------+
| `-_ out | | | |
| input `-_ | str | int | ip |
| / match `-_ | | | |
+---------------+---------+-------------+------------+
| str / str | map_str | map_str_int | map_str_ip |
| str / sub | map_sub | map_sub_int | map_sub_ip |
| str / dir | map_dir | map_dir_int | map_dir_ip |
| str / dom | map_dom | map_dom_int | map_dom_ip |
| str / end | map_end | map_end_int | map_end_ip |
| str / reg | map_reg | map_reg_int | map_reg_ip |
| int / int | map_int | map_int_int | map_int_ip |
| ip / ip | map_ip | map_ip_int | map_ip_ip |
+---------------+---------+-------------+------------+
The names are intentionally chosen to reflect the same match methods
as ACLs use.
This patch allows each sample cast function to specify the sample
output type. The goal is to be able to emit an output type IPv4 or
IPv6 depending on what is found in the input if the next converter
is able to process them both.
The patch also adds a new pseudo type called "ADDR". This type is an
alias for IPV4 and IPV6 which is only used as an input type by converters
who want to express their compatibility with both address formats. It may
not be emitted.
The goal is to unify as much as possible the processing of IPv4 and IPv6
in order not to add extra keywords for the maps which act as converters,
but will match samples like ACLs do with their patterns.
We now have the following enums and all related functions return them and
consume them :
enum pat_match_res {
PAT_NOMATCH = 0, /* sample didn't match any pattern */
PAT_MATCH = 3, /* sample matched at least one pattern */
};
enum acl_test_res {
ACL_TEST_FAIL = 0, /* test failed */
ACL_TEST_MISS = 1, /* test may pass with more info */
ACL_TEST_PASS = 3, /* test passed */
};
enum acl_cond_pol {
ACL_COND_NONE, /* no polarity set yet */
ACL_COND_IF, /* positive condition (after 'if') */
ACL_COND_UNLESS, /* negative condition (after 'unless') */
};
It's just in order to avoid doubts when reading some code.
This patch just renames functions, types and enums. No code was changed.
A significant number of files were touched, especially the ACL arrays,
so it is likely that some external patches will not apply anymore.
One important thing is that we had to split ACL_PAT_* into two groups :
- ACL_TEST_{PASS|MISS|FAIL}
- PAT_{MATCH|UNMATCH}
A future patch will enforce enums on all these places to avoid confusion.
This patch just moves code without any change.
The ACL are just the association between sample and pattern. The pattern
contains the match method and the parse method. These two things are
different. This patch cleans the code by splitting it.
This will be used later with maps. Each map will associate an entry with
a sample_storage value.
This patch changes the "parse" prototype and all the parsing methods.
The goal is to associate "struct sample_storage" to each entry of
"struct acl_pattern". Only the "parse" function can add the sample value
into the "struct acl_pattern".
This struct is used to store a sample constant. The size of this
struct is less than the struct sample. This struct only contains
a constant and doesn't need the "ctx" nor the "flags".
If the acl keyword is a "fetch", the dedicated parsing function
"sample_parse_expr()" is used. Otherwise, the acl parsing function
"parse_acl_expr()" is extended to understand the syntax of a series
of converters placed after the "fetch" keyword.
Before this patch, each acl uses a "struct sample_fetch" and executes
it with the "<fetch>->process()" function. Now, the dedicated function
"sample_process()" is called.
These syntax are now avalaible:
acl bad req.hdr(host),lower -m str www
http-request redirect prefix /go-away if bad
acl bad hdr_beg(host),lower www
http-request redirect prefix /go-away if bad
Add a DRAIN sub-state for a server which
will be shown on the stats page instead of UP if
its effective weight is zero.
Also, log if a server enters or leaves the DRAIN state
as the result of an agent check.
Signed-off-by: Simon Horman <horms@verge.net.au>
The syntax of this new commands are:
enable agent <backend>/<server>
disable agent <backend>/<server>
These commands allow temporarily stopping and subsequently
re-starting an auxiliary agent check. The effect of this is as follows:
New checks are only initialised when the agent is in the enabled. Thus,
disable agent will prevent any new agent checks from begin initiated until
the agent re-enabled using enable agent.
When an agent is disabled the processing of an auxiliary agent check that
was initiated while the agent was set as enabled is as follows: All
results that would alter the weight, specifically "drain" or a weight
returned by the agent, are ignored. The processing of agent check is
otherwise unchanged.
The motivation for this feature is to allow the weight changing effects
of the agent checks to be paused to allow the weight of a server to be
configured using set weight without being overridden by the agent.
Signed-off-by: Simon Horman <horms@verge.net.au>
This is achieved by moving rise and fall from struct server to struct check.
After this move the behaviour of the primary check, server->check is
unchanged. However, the secondary agent check, server->agent now has
independent rise and fall values each of which are set to 1.
The result is that receiving "fail", "stopped" or "down" just once from the
agent will mark the server as down. And receiving a weight just once will
allow the server to be marked up if its primary check is in good health.
This opens up the scope to allow the rise and fall values of the agent
check to be configurable, however this has not been implemented at this
stage.
Signed-off-by: Simon Horman <horms@verge.net.au>
Allow an auxiliary agent check to be run independently of the
regular a regular health check. This is enabled by the agent-check
server setting.
The agent-port, which specifies the TCP port to use for the agent's
connections, is required.
The agent-inter, which specifies the interval between agent checks and
timeout of agent checks, is optional. If not set the value for regular
checks is used.
e.g.
server web1_1 127.0.0.1:80 check agent-port 10000
If either the health or agent check determines that a server is down
then it is marked as being down, otherwise it is marked as being up.
An agent health check performed by opening a TCP socket and reading an
ASCII string. The string should have one of the following forms:
* An ASCII representation of an positive integer percentage.
e.g. "75%"
Values in this format will set the weight proportional to the initial
weight of a server as configured when haproxy starts.
* The string "drain".
This will cause the weight of a server to be set to 0, and thus it
will not accept any new connections other than those that are
accepted via persistence.
* The string "down", optionally followed by a description string.
Mark the server as down and log the description string as the reason.
* The string "stopped", optionally followed by a description string.
This currently has the same behaviour as "down".
* The string "fail", optionally followed by a description string.
This currently has the same behaviour as "down".
Signed-off-by: Simon Horman <horms@verge.net.au>
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
Signed-off-by: Simon Horman <horms@verge.net.au>
Add state to struct check. This is currently used to store one bit,
CHK_RUNNING, which is set if a check is running and clear otherwise.
This bit was previously SRV_CHK_RUNNING of the state element of struct
server.
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Paramatise the following functions over the check of a server
* set_server_down
* set_server_up
* srv_getinter
* server_status_printf
* set_server_check_status
* set_server_disabled
* set_server_enabled
Generally the server parameter of these functions has been removed.
Where it is still needed it is obtained using check->server.
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
By paramatising these functions they may act on each of the checks
without further significant modification.
Explanation of the SSP_O_HCHK portion of this change:
* Prior to this patch SSP_O_HCHK serves a single purpose which
is to tell server_status_printf() weather it should print
the details of the check of a server or not.
With the paramatisation that this patch adds there are two cases.
1) Printing the details of the check in which case a
valid check parameter is needed.
2) Not printing the details of the check in which case
the contents check parameter are unused.
In case 1) we could pass SSP_O_HCHK and a valid check and;
In case 2) we could pass !SSP_O_HCHK and any value for check
including NULL.
If NULL is used for case 2) then SSP_O_HCHK becomes supurfulous
and as NULL is used for case 2) SSP_O_HCHK has been removed.
Signed-off-by: Simon Horman <horms@verge.net.au>
Move result element from struct server to struct check
This allows check results to be independent of the check's server.
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
Signed-off-by: Simon Horman <horms@verge.net.au>
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
The split has been made by:
* Moving elements of struct server's check element that will
be shared by both checks into a new check_common element
of struct server.
* Moving the remaining elements to a new struct check and
making struct server's check element a struct check.
* Adding a server element to struct check, a back-pointer
to the server element it is a member of.
- At this time the server could be obtained using
container_of, however, this will not be so easy
once a second struct check element is added to struct server
to accommodate an agent health check.
Signed-off-by: Simon Horman <horms@verge.net.au>
This was inadvertently added by "MEDIUM: checks: Add agent health check".
It appears to have never been used.
Signed-off-by: Simon Horman <horms@verge.net.au>
This function was designed for haproxy while testing other functions
in the past. Initially it was not planned to be used given the not
very interesting numbers it showed on real URL data : it is not as
smooth as the other ones. But later tests showed that the other ones
are extremely sensible to the server count and the type of input data,
especially DJB2 which must not be used on numeric input. So in fact
this function is still a generally average performer and it can make
sense to merge it in the end, as it can provide an alternative to
sdbm+avalanche or djb2+avalanche for consistent hashing or when hashing
on numeric data such as a source IP address or a visitor identifier in
a URL parameter.
Summary:
Avalanche is supported not as a native hashing choice, but a modifier
on the hashing function. Note that this means that possible configs
written after 1.5-dev4 using "hash-type avalanche" will get an informative
error instead. But as discussed on the mailing list it seems nobody ever
used it anyway, so let's fix it before the final 1.5 release.
The default values were selected for backward compatibility with previous
releases, as discussed on the mailing list, which means that the consistent
hashing will still apply the avalanche hash by default when no explicit
algorithm is specified.
Examples
(default) hash-type map-based
Map based hashing using sdbm without avalanche
(default) hash-type consistent
Consistent hashing using sdbm with avalanche
Additional Examples:
(a) hash-type map-based sdbm
Same as default for map-based above
(b) hash-type map-based sdbm avalanche
Map based hashing using sdbm with avalanche
(c) hash-type map-based djb2
Map based hashing using djb2 without avalanche
(d) hash-type map-based djb2 avalanche
Map based hashing using djb2 with avalanche
(e) hash-type consistent sdbm avalanche
Same as default for consistent above
(f) hash-type consistent sdbm
Consistent hashing using sdbm without avalanche
(g) hash-type consistent djb2
Consistent hashing using djb2 without avalanche
(h) hash-type consistent djb2 avalanche
Consistent hashing using djb2 with avalanche
Summary:
In testing at tumblr, we found that using djb2 hashing instead of the
default sdbm hashing resulted is better workload distribution to our backends.
This commit implements a change, that allows the user to specify the hash
function they want to use. It does not limit itself to consistent hashing
scenarios.
The supported hash functions are sdbm (default), and djb2.
For a discussion of the feature and analysis, see mailing list thread
"Consistent hashing alternative to sdbm" :
http://marc.info/?l=haproxy&m=138213693909219
Note: This change does NOT make changes to new features, for instance,
applying an avalance hashing always being performed before applying
consistent hashing.
This new action immediately closes the connection with the server
when the condition is met. The first such rule executed ends the
rules evaluation. The main purpose of this action is to force a
connection to be finished between a client and a server after an
exchange when the application protocol expects some long time outs
to elapse first. The goal is to eliminate idle connections which
take signifiant resources on servers with certain protocols.
When a process with large stick tables is replaced by a new one and remains
present until the last connection finishes, it keeps these data in memory
for nothing since they will never be used anymore by incoming connections,
except during syncing with the new process. This is especially problematic
when dealing with long session protocols such as WebSocket as it becomes
possible to stack many processes and eat a lot of memory.
So the idea here is to know if a table still needs to be synced or not,
and to purge all unused entries once the sync is complete. This means that
after a few hundred milliseconds when everything has been synchronized with
the new process, only a few entries will remain allocated (only the ones
held by sessions during the restart) and all the remaining memory will be
freed.
Note that we carefully do that only after the grace period is expired so as
not to impact a possible proxy that needs to accept a few more connections
before leaving.
Doing this required to add a sync counter to the stick tables, to know how
many peer sync sessions are still in progress in order not to flush the entries
until all synchronizations are completed.
verifyhost allows you to specify a hostname that the remote server's
SSL certificate must match. Connections that don't match will be
closed with an SSL error.
The HTTP request counter is incremented non atomically, which means that
many requests can log the same ID. Let's increment it when it is consumed
so that we avoid this case.
This bug was reported by Patrick Hemmer. It's 1.5-specific and does not
need to be backported.
In preparation of more flexibility in the stick counters, make their
number configurable. It still defaults to 3 which is the minimum
accepted value. Changing the value alone is not sufficient to get
more counters, some bitfields still need to be updated and the TCP
actions need to be updated as well, but this update tries to be
easier, which is nice for experimentation purposes.
We're having a lot of duplicate code just because of minor variants between
fetch functions that could be dealt with if the functions had the pointer to
the original keyword, so let's pass it as the last argument. An earlier
version used to pass a pointer to the sample_fetch element, but this is not
the best solution for two reasons :
- fetch functions will solely rely on the keyword string
- some other smp_fetch_* users do not have the pointer to the original
keyword and were forced to pass NULL.
So finally we're passing a pointer to the keyword as a const char *, which
perfectly fits the original purpose.
The max weight of server is 256 now, but SRV_UWGHT_MAX is still 255. As a result,
FWRR will not work well when server's weight is 256. The description is as below:
There are some macros related to server's weight in include/types/server.h:
#define SRV_UWGHT_RANGE 256
#define SRV_UWGHT_MAX (SRV_UWGHT_RANGE - 1)
#define SRV_EWGHT_MAX (SRV_UWGHT_MAX * BE_WEIGHT_SCALE)
Since weight of server can be reach to 256 and BE_WEIGHT_SCALE equals to 16,
the max eweight of server should be 256*16 = 4096, it will exceed SRV_EWGHT_MAX
which equals to SRV_UWGHT_MAX*BE_WEIGHT_SCALE = 255*16 = 4080. When a server
with weight 256 is insterted into FWRR tree during initialization, the key value
of this server should be SRV_EWGHT_MAX - s->eweight = 4080 - 4096 = -16 which
is closed to UINT_MAX in unsigned type, so the server with highest weight will
be not elected as the first server to process request.
In addition, it is a better choice to compare with SRV_UWGHT_MAX than a magic
number 256 while doing check for the weight. The max number of servers for
round-robin algorithm is also updated.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
Remove event_accept() in include/proto/proto_http.h and use correct function
name in other two files instead of event_accept().
Signed-off-by: Godbach <nylzhaowei@gmail.com>
It was a bit inconsistent to have gpc start at 0 and sc start at 1,
so make sc start at zero like gpc. No previous release was issued
with sc3 anyway, so no existing setup should be affected.
This configures the client-facing connection to receive a PROXY protocol
header before any byte is read from the socket. This is equivalent to
having the "accept-proxy" keyword on the "bind" line, except that using
the TCP rule allows the PROXY protocol to be accepted only for certain
IP address ranges using an ACL. This is convenient when multiple layers
of load balancers are passed through by traffic coming from public
hosts.
