Until now, signals configured with no handler were still enabled and
ignored upon signal reception. Until now it was not an issue but with
SSL causing many EPIPE all the time, it becomes obvious that signal
processing comes with a cost. So set the handler to SIG_IGN when the
function is NULL.
When calling fd_rem(), the polling was not correctly disabled because the
->prev state was set to zero instead of the previous value. fd_rem() is
very rarely used, only just before closing a socket.
The effect is that upon an error reported at the connection level, if the
task assigned to the connection was too slow to be woken up because of too
many other tasks in the run queue, the FD was still not disabled and caused
the connection handler to be called again with the same event until the task
was finally executed to close the fd.
This issue only affects the epoll poller, not the sepoll variant nor any of
the other ones.
It was already present in 1.4 and even 1.3 with the same almost unnoticeable
effects. The bug can in fact only be discovered during development where it
emphasizes other bugs.
It should be backported anyway.
Since recent changes on the global frontend, it was not possible anymore
to soft-reload a process which had a stats socket because the socket would
not be disabled upon reload. The only solution to this endless madness is
to have the global frontend part of normal proxies.
Since we don't want to get an ID that shifts all other proxies and causes
trouble in deployed environments, we assign it ID #0 which other proxies
can't grab, and we don't report it in the stats pages.
Pausing a UNIX_STREAM socket results in a major pain because the socket
does not correctly resume, it wakes poll() but return EAGAIN on accept(),
resulting in a busy loop. So let's only pause protocols that support it.
This issues has existed since UNIX sockets were introduced on bind lines.
Each proxy contains a reference to the original config file and line
number where it was declared. The pointer used is just a reference to
the one passed to the function instead of being duplicated. The effect
is that it is not valid anymore at the end of the parsing and that all
proxies will be enumerated as coming from the same file on some late
configuration errors. This may happen for exmaple when reporting SSL
certificate issues.
By copying using strdup(), we avoid this issue.
1.4 has the same issue, though no report of the proxy file name is done
out of the config section. Anyway a backport is recommended to ease
post-mortem analysis.
Hervé Commowick reported an issue : haproxy dies in a segfault during a
soft restart if it tries to pause a disabled proxy. This is because disabled
proxies have no management task so we must not wake the task up. This could
easily remain unnoticed since the old process was expected to go away, so
having it go away faster was not really troubling. However, with sync peers,
it is obvious that there is no peer sync during this reload.
This issue has been introduced in 1.5-dev7 with the removal of the
maintain_proxies() function. No backport is needed.
If we get an SSL error during the handshake, we at least try to see
if a syscall reported an error or not. In case of an error, it generally
means that the connection failed. If there is no error, then the connection
established successfully.
The difference is important for health checks which report the precise cause
to the logs and to the stats.
Disables the stateless session resumption (RFC 5077 TLS Ticket
extension) and force to use stateful session resumption. Stateless
session resumption is more expensive in CPU usage.
Disables the stateless session resumption (RFC 5077 TLS Ticket extension)
and force to use stateful session resumption.
Stateless session resumption is more expensive in CPU usage.
This allows to easily add/remove "bind" entries to a frontend without
being forced to remove it when the last entry is temporarily removed.
While "disabled" may sometimes work in a frontend, it becomes trickier
on "listen" sections which can also hold servers and be referenced by
other frontends.
Note that a "listen" section with no "bind" is equivalent to a "backend"
section.
Configs without any listeners are still reported as invalid and refuse
to load.
This is because "notlsv1" used to disable TLSv1.0 only and had no effect
on v1.1/v1.2. so better have an option for each version. This applies both
to "bind" and "server" statements.
It removes dependencies with futex or mutex but ssl performances decrease
using nbproc > 1 because switching process force session renegotiation.
This can be useful on small systems which never intend to run in multi-process
mode.
We don't needa to lock the memory when there is a single process. This can
make a difference on small systems where locking is much more expensive than
just a test.
Add fetch 'ssl_verify_caerr':
returns the first ssl verify error at depth > 0 (CA chain).
Add fetch 'ssl_verify_caerr_depth':
returns the first ssl verify error depth (max returns is 15 if depth > 15).
Add fetch 'ssl_verify_crterr':
returns the fist ssl verify error at depth == 0.
Allow to ignore some verify errors and to let them pass the handshake.
Add option 'crt-ignore-err <list>'
Ignore verify errors at depth == 0 (client certificate)
<list> is string 'all' or a comma separated list of verify error IDs
(see http://www.openssl.org/docs/apps/verify.html)
Add option 'ca-ignore-err <list>'
Same as 'crt-ignore-err' for all depths > 0 (CA chain certs)
Ex ignore all errors on CA and expired or not-yet-valid errors
on client certificate:
bind 0.0.0.0:443 ssl crt crt.pem verify required
cafile ca.pem ca-ignore-err all crt-ignore-err 10,9
Add keyword 'verify' on bind:
'verify none': authentication disabled (default)
'verify optional': accept connection without certificate
and process a verify if the client sent a certificate
'verify required': reject connection without certificate
and process a verify if the client send a certificate
Add keyword 'cafile' on bind:
'cafile <path>' path to a client CA file used to verify.
'crlfile <path>' path to a client CRL file used to verify.
This will be needed to find the stream interface from the connection
once they're detached, but in the more immediate term, we'll need this
for health checks since they don't use a stream interface.
We were having several different behaviours with monitor-net and
"mode health" :
- monitor-net on TCP connections was evaluated just after accept(),
did not count a connection on the frontend and were not subject
to tcp-request connection rules, and caused an immediate close().
- monitor-net in HTTP mode was evaluated once the session was
accepted (eg: on top of SSL), returned "HTTP/1.0 200 OK\r\n\r\n"
over the connection's data layer and instanciated a session which
was responsible for closing this connection. A connection AND a
session were counted for the frontend ;
- "mode health" with "option httpchk" would do exactly the same as
monitor-net in HTTP mode ;
- "mode health" without "option httpchk" would do the same as above
except that "OK" was returned instead of "HTTP/1.0 200 OK\r\n\r\n".
None of them took care of cleaning the input buffer, sometimes resulting
in a TCP reset to be emitted after the last packet if a request was received
over the connection.
Given the inconsistencies and the complexity in keeping all these features
handled at the right position, we now slightly changed the way they are
handled :
- all of them are handled just after the "tcp-request connection" rules,
so that all of them may be blocked using such rules, offering more
flexibility and consistency ;
- no connection handshake is performed anymore for non-TCP modes
- all of them send the response as raw data over the socket, there is no
more difference between TCP and HTTP mode for example (these rules were
never meant to be served over SSL connections and were never documented
as able to do that).
- any possible pending data on the incoming socket is drained before the
response is sent, in order to avoid the risk of a reset.
- none of them exactly did what was documented !
This results in more consistent, more flexible and more accurate handling of
monitor rules, with smaller and more robust code.
Since at least commit a458b679, msg->sov could become negative in
http_parse_chunk_size() if a chunk size wrapped around the buffer.
The effect is that at some point channel_forward() was called with
a negative size, causing all data to be transferred without being
analyzed anymore.
Since haproxy does not support keep-alive with the server yet, this
issue is not really noticeable, as the server closes the connection
in response. Still, when tunnel mode is used or when pretent-keepalive
is used, it is possible to see the problem.
This issue was reported and diagnosed by William Lallemand at
Exceliance.
It is sometimes useful to completely disable accepting new connections
on a frontend during maintenance operations. By setting a frontend's
maxconn to zero, connections are not accepted anymore until the limit
is increased again.
Recent commit 4348fad1 (listeners: use dual-linked lists to chain listeners
with frontends) broke frontend lookup in stats sockets by using the wrong
iterator in the listeners.
Check the protocol pointer and not the socket to report an unknown family
in servers or peers. This can never happen anyway, it's just to be completely
clean.
Cyril Bonté reported a mangled debug output when an invalid request
was sent with a faulty request line. The reason was the use of the
msg->sl.rq.l offset which was not yet initialized in this case. So
we change the way to report such an error so that first we initialize
it to zero before parsing a message, then we use that to know whether
we can trust it or not. If it's still zero, then we display the whole
buffer, truncated by debug_hdr() to the first CR or LF character, which
results in the first line only.
The same operation was performed for the response, which was wrong too.
There are now too many bind options to still have them in the middle
of the keyword matrix, so let's move them with the server options in
section 5. No new option was documented yet at this point.
The global stats socket statement now makes use of the standard bind parsers.
This results in all UNIX socket options being set by proto_uxst and in all
TCP and SSL options being inherited and usable. For example it is now possible
to enable a stats socket over SSL/TCP by appending the "ssl" keyword and a
certificate after "crt".
The code is simplified since we don't have a special case to parse this config
keyword anymore.
It's better to set all listeners to ssl_sock when seeing the "ssl"
keyword that to loop on all of them afterwards just for this. This
also removes some #ifdefs.
Now the stats socket is allocated when the 'stats socket' line is parsed,
and assigned using the standard str2listener(). This has two effects :
- more than one stats socket can now be declared
- stats socket now support protocols other than UNIX
The next step is to remove the duplicate bind config parsing.
Alex Markham reported and diagnosed a bug appearing on 1.5-dev11,
causing a crash on x86_64 when header hashing is used. The cause is
a missing (int) cast causing a negative offset to appear positive
and the resulting pointer to go out of bounds.
The crash is not possible anymore since 1.5-dev12 because a second
bug caused the negative sign to disappear so the pointer is always
within range but always wrong, so balance hdr() never works anymore.
This fix restores the correct behaviour and ensures the sign is
correct.
