The file proto_tcp.c has become a real mess because it still contains
tons of definitions that have nothing to do with the TCP protocol setup.
This commit moves the ruleset actions "set-src-port", "set-dst-port",
"set-src", "set-dst", and "silent-drop" to a new file "tcp_act.c".
Nothing has changed beyond this.
This new flag will be used to mark FDs that must be passed to any future
process across the CLI's "_getsocks" command.
The scheme here is quite complex and full of special cases:
- FDs inherited from parent processes are *not* exported this way, as
they are supposed to instead be passed by the master process itself
across reloads. However such FDs ought never to be paused otherwise
this would disrupt the socket in the parent process as well;
- FDs resulting from a "bind" performed over a socket pair, which are
in fact one side of a socket pair passed inside another control socket
pair must not be passed either. Since all of them are used the same
way, for now it's enough never to put this "exported" flag to FDs
bound by the socketpair code.
- FDs belonging to temporary listeners (e.g. a passive FTP data port)
must not be passed either. Fortunately we don't have such FDs yet.
- the rest of the listeners for now are made of TCP, UNIX stream, ABNS
sockets and are exportable, so they get the flag.
- UDP listeners were wrongly created as listeners and are not suitable
here. Their FDs should be passed but for now they are not since the
client doesn't even distinguish the SO_TYPE of the retrieved sockets.
In addition, it's important to keep in mind that:
- inherited FDs may never be closed in master process but may be closed
in worker processes if the service is shut down (useless since still
bound, but technically possible) ;
- inherited FDs may not be disabled ;
- exported FDs may be disabled because the caller will perform the
subsequent listen() on them. However that might not work for all OSes
- exported FDs may be closed, it just means the service was shut down
from the worker, and will be rebound in the new process. This implies
that we have to disable exported on close().
=> as such, contrary to an apparently obvious equivalence, the "exported"
status doesn't imply anything regarding the ability to close a
listener's FD or not.
Let's not look at the listener options passed by the original process
and determine from the socket itself whether it is configured for
transparent mode or not. This is cleaner and safer, and doesn't rely
on flag values that could possibly change between versions.
The v4v6 and v6only options are passed as data during the socket transfer
between processes so that the new process can decide whether it wants to
reuse a socket or not. But this actually misses one point: if no such option
is set and the OS defaults are changed between the reloads, then the socket
will still be inherited and will never be rebound using the new options.
This can be seen by starting the following config:
global
stats socket /tmp/haproxy.sock level admin expose-fd listeners
frontend testme
bind :::1234
timeout client 2000ms
Having a look at the OS settins, v6only is disabled:
$ cat /proc/sys/net/ipv6/bindv6only
0
A first check shows it's indeed bound to v4 and v6:
$ ss -an -6|grep 1234
tcp LISTEN 0 2035 *:1234 *:*
Reloading the process doesn't change anything (which is expected). Now let's set
bindv6only:
$ echo 1 | sudo tee /proc/sys/net/ipv6/bindv6only
1
$ cat /proc/sys/net/ipv6/bindv6only
1
Reloading gives the same state:
$ ss -an -6|grep 1234
tcp LISTEN 0 2035 *:1234 *:*
However a restart properly shows a correct bind:
$ ss -an -6|grep 1234
tcp LISTEN 0 2035 [::]:1234 [::]:*
This one doesn't change once bindv6only is reset, for the same reason.
This patch attacks this problem differently. Instead of passing the two
options at once for each listening fd, it ignores the options and reads
the socket's current state for the IPV6_V6ONLY flag and sets it only.
Then before looking for a compatible FD, it checks the OS's defaults
before deciding which of the v4v6 and v6only needs to be kept on the
listener. And the selection is only made on this.
First, it addresses this issue. Second, it also ensures that if such
options are changed between reloads to identical states, the socket
can still be inherited. For example adding v4v6 when bindv6only is not
set will allow the socket to still be usable. Third, it avoids an
undesired dependency on the LI_O_* bit values between processes across
a reload (for these ones at least).
It might make sense to backport this to some recent stable versions, but
quite frankly the likelyhood that anyone will ever notice it is extremely
faint.
If a socket was already bound (inherited from a parent or retrieved from
a previous process), there's no point trying to change its IPV6_V6ONLY
state since it will fail. This is visible in strace as an EINVAL during
a reload when passing FDs.
This way, all fields of the buffer structure are reset when a string argument
(ARGT_STR) is released. It is also a good way to explicitly specify this kind
of argument is a chunk. So .data and .size fields must be set.
This patch may be backported to ease backports.
When a connect() doesn't immediately succeed (i.e. most of the times),
fd_cant_send() is called to enable polling. But given that we don't
mark that we cannot receive either, we end up performing a failed
recvfrom() immediately when the connect() is finally confirmed, as
indicated in issue #253.
This patch simply adds fd_cant_recv() as well so that we're only
notified once the recv path is ready. The reason it was not there
is purely historic, as in the past when there was the fd cache,
doing it would have caused a pending recv request to be placed into
the fd cache, hence a useless recvfrom() upon success (i.e. what
happens now).
Without this patch, forwarding 100k connections does this:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
17.51 0.704229 7 100000 100000 connect
16.75 0.673875 3 200000 sendto
16.24 0.653222 3 200036 close
10.82 0.435082 1 300000 100000 recvfrom
10.37 0.417266 1 300012 setsockopt
7.12 0.286511 1 199954 epoll_ctl
6.80 0.273447 2 100000 shutdown
5.34 0.214942 2 100005 socket
4.65 0.187137 1 105002 5002 accept4
3.35 0.134757 1 100004 fcntl
0.61 0.024585 4 5858 epoll_wait
With the patch:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
18.04 0.697365 6 100000 100000 connect
17.40 0.672471 3 200000 sendto
17.03 0.658134 3 200036 close
10.57 0.408459 1 300012 setsockopt
7.69 0.297270 1 200000 recvfrom
7.32 0.282934 1 199922 epoll_ctl
7.09 0.274027 2 100000 shutdown
5.59 0.216041 2 100005 socket
4.87 0.188352 1 104697 4697 accept4
3.35 0.129641 1 100004 fcntl
0.65 0.024959 4 5337 1 epoll_wait
Note the total disappearance of 1/3 of failed recvfrom() *without*
adding any extra syscall anywhere else.
The trace of an HTTP health check is now totally clean, with no useless
syscall at all anymore:
09:14:21.959255 connect(9, {sa_family=AF_INET, sin_port=htons(8000), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 EINPROGRESS (Operation now in progress)
09:14:21.959292 epoll_ctl(4, EPOLL_CTL_ADD, 9, {EPOLLIN|EPOLLOUT|EPOLLRDHUP, {u32=9, u64=9}}) = 0
09:14:21.959315 epoll_wait(4, [{EPOLLOUT, {u32=9, u64=9}}], 200, 1000) = 1
09:14:21.959376 sendto(9, "OPTIONS / HTTP/1.0\r\ncontent-leng"..., 41, MSG_DONTWAIT|MSG_NOSIGNAL, NULL, 0) = 41
09:14:21.959436 epoll_wait(4, [{EPOLLOUT, {u32=9, u64=9}}], 200, 1000) = 1
09:14:21.959456 epoll_ctl(4, EPOLL_CTL_MOD, 9, {EPOLLIN|EPOLLRDHUP, {u32=9, u64=9}}) = 0
09:14:21.959512 epoll_wait(4, [{EPOLLIN|EPOLLRDHUP, {u32=9, u64=9}}], 200, 1000) = 1
09:14:21.959548 recvfrom(9, "HTTP/1.0 200\r\nContent-length: 0\r"..., 16320, 0, NULL, NULL) = 126
09:14:21.959570 close(9) = 0
With the edge-triggered poller, it gets even better:
09:29:15.776201 connect(9, {sa_family=AF_INET, sin_port=htons(8000), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 EINPROGRESS (Operation now in progress)
09:29:15.776256 epoll_ctl(4, EPOLL_CTL_ADD, 9, {EPOLLIN|EPOLLOUT|EPOLLRDHUP|EPOLLET, {u32=9, u64=9}}) = 0
09:29:15.776287 epoll_wait(4, [{EPOLLOUT, {u32=9, u64=9}}], 200, 1000) = 1
09:29:15.776320 sendto(9, "OPTIONS / HTTP/1.0\r\ncontent-leng"..., 41, MSG_DONTWAIT|MSG_NOSIGNAL, NULL, 0) = 41
09:29:15.776374 epoll_wait(4, [{EPOLLIN|EPOLLOUT|EPOLLRDHUP, {u32=9, u64=9}}], 200, 1000) = 1
09:29:15.776406 recvfrom(9, "HTTP/1.0 200\r\nContent-length: 0\r"..., 16320, 0, NULL, NULL) = 126
09:29:15.776434 close(9) = 0
It could make sense to backport this patch to 2.2 and maybe 2.1 after
it has been sufficiently checked for absence of side effects in 2.3-dev,
as some people had reported an extra overhead like in issue #168.
To set a connection as private, the conn_set_private() function must now be
called. It sets the CO_FL_PRIVATE flags, but it also remove the connection from
the available connection list, if necessary. For now, it never happens because
only HTTP/1 connections may be set as private after their creation. And these
connections are never inserted in the available connection list.
Previous commit b24bc0d ("MINOR: tcp: Support TCP keepalive parameters
customization") broke non-Linux builds as TCP_KEEP{CNT,IDLE,INTVL} are
not necessarily defined elsewhere.
This patch adds the required #ifdefs to condition the visibility of the
keywords, and adds a mention in the doc about their dependency on Linux.
It is now possible to customize TCP keepalive parameters.
These correspond to the socket options TCP_KEEPCNT, TCP_KEEPIDLE, TCP_KEEPINTVL
and are valid for the defaults, listen, frontend and backend sections.
This patch fixes GitHub issue #670.
This patch fixes all the leftovers from the include cleanup campaign. There
were not that many (~400 entries in ~150 files) but it was definitely worth
doing it as it revealed a few duplicates.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
extern struct dict server_name_dict was moved from the type file to the
main file. A handful of inlined functions were moved at the bottom of
the file. Call places were updated to use server-t.h when relevant, or
to simply drop the entry when not needed.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
It was moved without any change, however many callers didn't need it at
all. This was a consequence of the split of proto_http.c into several
parts that resulted in many locations to still reference it.
The type file is becoming a mess, half of it is for the proxy protocol,
another good part describes conn_streams and mux ops, it would deserve
being split again. At least it was reordered so that elements are easier
to find, with the PP-stuff left at the end. The MAX_SEND_FD macro was moved
to compat.h as it's said to be the value for Linux.
The TASK_IS_TASKLET() macro was moved to the proto file instead of the
type one. The proto part was a bit reordered to remove a number of ugly
forward declaration of static inline functions. About a tens of C and H
files had their dependency dropped since they were not using anything
from task.h.
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
This one is particularly tricky to move because everyone uses it
and it depends on a lot of other types. For example it cannot include
arg-t.h and must absolutely only rely on forward declarations to avoid
dependency loops between vars -> sample_data -> arg. In order to address
this one, it would be nice to split the sample_data part out of sample.h.
List.h was missing for LIST_ADDQ(). A few unneeded includes of action.h
were removed from certain files.
This one still relies on applet.h and stick-table.h.
A few includes were missing in each file. A definition of
struct polled_mask was moved to fd-t.h. The MAX_POLLERS macro was
moved to defaults.h
Stdio used to be silently inherited from whatever path but it's needed
for list_pollers() which takes a FILE* and which can thus not be
forward-declared.
And also rename standard.c to tools.c. The original split between
tools.h and standard.h dates from version 1.3-dev and was mostly an
accident. This patch moves the files back to what they were expected
to be, and takes care of not changing anything else. However this
time tools.h was split between functions and types, because it contains
a small number of commonly used macros and structures (e.g. name_desc)
which in turn cause the massive list of includes of tools.h to conflict
with the callers.
They remain the ugliest files of the whole project and definitely need
to be cleaned and split apart. A few types are defined there only for
functions provided there, and some parts are even OS-specific and should
move somewhere else, such as the symbol resolution code.
The protocol.h files are pretty low in the dependency and (sadly) used
by some files from common/. Almost nothing was changed except lifting a
few comments.
The type was moved out as it's used by standard.h for netns_entry.
Instead of just being a forward declaration when not used, it's an
empty struct, which makes gdb happier (the resulting stripped executable
is the same).
Half of the users of this include only need the type definitions and
not the manipulation macros nor the inline functions. Moves the various
types into mini-clist-t.h makes the files cleaner. The other one had all
its includes grouped at the top. A few files continued to reference it
without using it and were cleaned.
In addition it was about time that we'd rename that file, it's not
"mini" anymore and contains a bit more than just circular lists.
This one used to be stored into debug.h but the debug tools got larger
and require a lot of other includes, which can't use BUG_ON() anymore
because of this. It does not make sense and instead this macro should
be placed into the lower includes and given its omnipresence, the best
solution is to create a new bug.h with the few surrounding macros needed
to trigger bugs and place assertions anywhere.
Another benefit is that it won't be required to add include <debug.h>
anymore to use BUG_ON, it will automatically be covered by api.h. No
less than 32 occurrences were dropped.
The FSM_PRINTF macro was dropped since not used at all anymore (probably
since 1.6 or so).
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
Backend counters must be incremented only if a backend was already assigned to
the stream (when the stream exists). Otherwise, it means we are still on the
frontend side.
This patch may be backported as far as 1.6.
When an action interrupts a transaction, returning a response or not, it must
return the ACT_RET_ABRT value and not ACT_RET_STOP. ACT_RET_STOP is reserved to
stop the processing of the current ruleset.
No backport needed because on previous versions, the action return values are
not handled the same way.
When at least a filter is attached to a stream, FLT_END analyzers must be
preserved on request and response channels.
This patch should be backported as far as 1.7.
Just like previous commit, we don't need to pass through the connection
layer anymore to enable polling during a connect(), we know the FD, so
let's simply call fd_want_send().
When an end pointer is passed, instead of complaining that a comma is
missing after a keyword, sample_parse_expr() will silently return the
pointer to the current location into this return pointer so that the
caller can continue its parsing. This will be used by more complex
expressions which embed sample expressions, and may even permit to
embed sample expressions into arguments of other expressions.
when `getsockopt` previously failed, we were trying to set defaultmss
with -2 value.
this is a followup of github issue #499
this should be backported to all versions >= v1.8
Fixes: 153659f1ae ("MINOR: tcp: When binding socket, attempt to
reuse one from the old proc.")
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
we were trying to close file descriptor even when `socket` call was
failing.
this should fix github issue #499
this should be backported to all versions >= v1.8
Fixes: 153659f1ae ("MINOR: tcp: When binding socket, attempt to
reuse one from the old proc.")
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
When intializing a listener, let's make sure the bind_thread mask is
always limited to all_threads_mask when inserting the FD. This will
avoid seeing listening FDs with bits corresponding to threads that are
not active (e.g. when using "bind ... process 1/even"). The side effect
is very limited, all that was identified is that atomic operations are
used in fd_update_events() when not necessary. It's more a matter of
long-term correctness in practice.
This fix might be backported as far as 1.8 (then proto_sockpair must
be dropped).
The function is not TCP-specific at all, it covers all FD-based sockets
so let's move this where other similar functions are, in connection.c,
and rename it conn_fd_check().
Now that we know what pollers can return ERR/HUP, we can take this
into account to save one syscall: with such a poller, if neither are
reported, then we know the connection succeeded and we don't need to
go with getsockopt() nor connect() to validate this. In addition, for
the remaining cases (select() or suspected errors), we'll always go
through the extra connect() attempt and enumerate possible "in progress",
"connected" or "failed" status codes and take action solely based on
this.
This results in one saved syscall on modern pollers, only a second
connect() still being used on select() and the server's address never
being needed anymore.
Note that we cannot safely replace connect() with getsockopt() as the
latter clears the error on the socket without saving it, and health
checks rely on it for their reporting. This would be OK if the error
was saved in the connection itself.
We never enter val_fc_time_value when an associated fetcher such as `fc_rtt` is
called without argument. meaning `type == ARGT_STOP` will never be true and so
the default `data.sint = TIME_UNIT_MS` will never be set. remove this part to
avoid thinking default data.sint is set to ms while reading the code.
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
[Cf: This patch may safely backported as far as 1.7. But no matter if not.]
There are 2 kinds of tcp info fetchers. Those returning a time value (fc_rtt and
fc_rttval) and those returning a counter (fc_unacked, fc_sacked, fc_retrans,
fc_fackets, fc_lost, fc_reordering). Because of a bug, the counters were handled
as time values, and by default, were divided by 1000 (because of an invalid
conversion from us to ms). To work around this bug and have the right value, the
argument "us" had to be specified.
So now, tcp info fetchers returning a counter don't support any argument
anymore. To not break old configurations, if an argument is provided, it is
ignored and a warning is emitted during the configuration parsing.
In addition, parameter validiation is now performed during the configuration
parsing.
This patch must be backported as far as 1.7.
In order to address the absurd polling sequence described in issue #253,
let's make sure we disable receiving on a connection until it's established.
Previously with bottom-top I/Os, we were almost certain that a connection
was ready when the first I/O was confirmed. Now we can enter various
functions, including process_stream(), which will attempt to read
something, will fail, and will then subscribe. But we don't want them
to try to receive if we know the connection didn't complete. The first
prerequisite for this is to mark the connection as not ready for receiving
until it's validated. But we don't want to mark it as not ready for sending
because we know that attempting I/Os later is extremely likely to work
without polling.
Once the connection is confirmed we re-enable recv readiness. In order
for this event to be taken into account, the call to tcp_connect_probe()
was moved earlier, between the attempt to send() and the attempt to recv().
This way if tcp_connect_probe() enables reading, we have a chance to
immediately fall back to this and read the possibly pending data.
Now the trace looks like the following. It's far from being perfect
but we've already saved one recvfrom() and one epollctl():
epoll_wait(3, [], 200, 0) = 0
socket(AF_INET, SOCK_STREAM, IPPROTO_TCP) = 7
fcntl(7, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
setsockopt(7, SOL_TCP, TCP_NODELAY, [1], 4) = 0
connect(7, {sa_family=AF_INET, sin_port=htons(8000), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 EINPROGRESS (Operation now in progress)
epoll_ctl(3, EPOLL_CTL_ADD, 7, {EPOLLIN|EPOLLOUT|EPOLLRDHUP, {u32=7, u64=7}}) = 0
epoll_wait(3, [{EPOLLOUT, {u32=7, u64=7}}], 200, 1000) = 1
connect(7, {sa_family=AF_INET, sin_port=htons(8000), sin_addr=inet_addr("127.0.0.1")}, 16) = 0
getsockopt(7, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
sendto(7, "OPTIONS / HTTP/1.0\r\n\r\n", 22, MSG_DONTWAIT|MSG_NOSIGNAL, NULL, 0) = 22
epoll_ctl(3, EPOLL_CTL_MOD, 7, {EPOLLIN|EPOLLRDHUP, {u32=7, u64=7}}) = 0
epoll_wait(3, [{EPOLLIN|EPOLLRDHUP, {u32=7, u64=7}}], 200, 1000) = 1
getsockopt(7, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
getsockopt(7, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
recvfrom(7, "HTTP/1.0 200\r\nContent-length: 0\r\nX-req: size=22, time=0 ms\r\nX-rsp: id=dummy, code=200, cache=1, size=0, time=0 ms (0 real)\r\n\r\n", 16384, 0, NULL, NULL) = 126
close(7) = 0
Dragan Dosen found that the listeners lock is not sufficient to protect
the listeners list when proxies are stopping because the listeners are
also unlinked from the protocol list, and under certain situations like
bombing with soft-stop signals or shutting down many frontends in parallel
from multiple CLI connections, it could be possible to provoke multiple
instances of delete_listener() to be called in parallel for different
listeners, thus corrupting the protocol lists.
Such operations are pretty rare, they are performed once per proxy upon
startup and once per proxy on shut down. Thus there is no point trying
to optimize anything and we can use a global lock to protect the protocol
lists during these manipulations.
This fix (or a variant) will have to be backported as far as 1.8.
Most of the locations were already safe, only two places needed to have
one extra check to avoid assuming that cli_conn->src is necessarily set
(it is in practice but let's stay safe).
The old module proto_http does not exist anymore. All code dedicated to the HTTP
analysis is now grouped in the file proto_htx.c. So, to finish the polishing
after removing the legacy HTTP code, proto_htx.{c,h} files have been moved in
http_ana.{c,h} files.
In addition, all HTX analyzers and related functions prefixed with "htx_" have
been renamed to start with "http_" instead.
As reported in GH issue #109 and in discourse issue
https://discourse.haproxy.org/t/haproxy-returns-408-or-504-error-when-timeout-client-value-is-every-25d
the time parser doesn't error on overflows nor underflows. This is a
recurring problem which additionally has the bad taste of taking a long
time before hitting the user.
This patch makes parse_time_err() return special error codes for overflows
and underflows, and adds the control in the call places to report suitable
errors depending on the requested unit. In practice, underflows are almost
never returned as the parsing function takes care of rounding values up,
so this might possibly happen on 64-bit overflows returning exactly zero
after rounding though. It is not really possible to cut the patch into
pieces as it changes the function's API, hence all callers.
Tests were run on about every relevant part (cookie maxlife/maxidle,
server inter, stats timeout, timeout*, cli's set timeout command,
tcp-request/response inspect-delay).
In tcp_probe_connect(), if the connection is still pending, do not disable
want_recv, we don't have any business to do so, but explicitely use
__conn_xprt_want_send(), otherwise the next time we'll reach tcp_probe_connect,
fd_send_ready() would return 0 and we would never flag the connection as
CO_FL_CONNECTED, which can lead to various problems, such as check not
completing because they consider it is not connected yet.
Now that the various handshakes come with their own XPRT, there's no
need for the CONN_FL_SOCK* flags, and the conn_sock_want|stop functions,
so garbage-collect them.
Have "socks4" and "check-via-socks4" server keyword added.
Implement handshake with SOCKS4 proxy server for tcp stream connection.
See issue #82.
I have the "SOCKS: A protocol for TCP proxy across firewalls" doc found
at "https://www.openssh.com/txt/socks4.protocol". Please reference to it.
[wt: for now connecting to the SOCKS4 proxy over unix sockets is not
supported, and mixing IPv4/IPv6 is discouraged; indeed, the control
layer is unique for a connection and will be used both for connecting
and for target address manipulation. As such it may for example report
incorrect destination addresses in logs if the proxy is reached over
IPv6]
We still have quite a number of build macros which are mapped 1:1 to a
USE_something setting in the makefile but which have a different name.
This patch cleans this up by renaming them to use the USE_something
one, allowing to clean up the makefile and make it more obvious when
reading the code what build option needs to be added.
The following renames were done :
ENABLE_POLL -> USE_POLL
ENABLE_EPOLL -> USE_EPOLL
ENABLE_KQUEUE -> USE_KQUEUE
ENABLE_EVPORTS -> USE_EVPORTS
TPROXY -> USE_TPROXY
NETFILTER -> USE_NETFILTER
NEED_CRYPT_H -> USE_CRYPT_H
CONFIG_HAP_CRYPT -> USE_LIBCRYPT
CONFIG_HAP_NS -> DUSE_NS
CONFIG_HAP_LINUX_SPLICE -> USE_LINUX_SPLICE
CONFIG_HAP_LINUX_TPROXY -> USE_LINUX_TPROXY
CONFIG_HAP_LINUX_VSYSCALL -> USE_LINUX_VSYSCALL
This implements support for the new API which relies on a call to
setsockopt().
On systems that support it (currently, only Linux >= 4.11), this enables
using TCP fast open when connecting to server.
Please note that you should use the retry-on "conn-failure", "empty-response"
and "response-timeout" keywords, or the request won't be able to be retried
on failure.
Co-authored-by: Olivier Houchard <ohouchard@haproxy.com>
The connect() method had 2 arguments, "data", that tells if there's pending
data to be sent, and "delack" that tells if we have to use a delayed ack
inconditionally, or if the backend is configured with tcp-smart-connect.
Turn that into one argument, "flags".
That way it'll be easier to provide more informations to connect() without
adding extra arguments.
The set-dst and set dst-var are available at both 'tcp-request
connection' and 'http-request' but not at the layer in the middle.
This patch fixes this miss and enables both set-dst and set-dst-var at
'tcp-request content' layer.
In an attempt to try to provide automatic maxconn settings, we need to
decorrelate a listner's backlog and maxconn so that these values can be
independent. This introduces a listener_backlog() function which retrieves
the backlog value from the listener's backlog, the frontend's, the
listener's maxconn, the frontend's or falls back to 1024. This
corresponds to what was done in cfgparse.c to force a value there except
the last fallback which was not set since the frontend's maxconn is always
known.
Now that nbproc and nbthread are exclusive, we can still provide more
detailed explanations about what we've found in the config when a bind
line appears on multiple threads and processes at the same time, then
ignore the setting.
This patch reduces the listener's thread mask to a single mask instead
of an array of masks per process. Now we have only one thread mask and
one process mask per bind-conf. This removes ~504 bytes of RAM per
bind-conf and will simplify handling of thread masks.
If a "bind" line only refers to process numbers not found by its parent
frontend or not covered by the global nbproc directive, or to a thread
not covered by the global nbthread directive, a warning is emitted saying
what will be used instead.
If the master was reloaded and there was a established connection to a
server, the FD resulting from the accept was leaking.
There was no CLOEXEC flag set on the FD of the socketpair created during
a connect call. This is specific to the socketpair in the master process
but it should be applied to every protocol in case we use them in the
master at some point.
No backport needed.
Most register_build_opts() calls use static strings. These ones were
replaced with a trivial REGISTER_BUILD_OPTS() statement adding the string
and its call to the STG_REGISTER section. A dedicated section could be
made for this if needed, but there are very few such calls for this to
be worth it. The calls made with computed strings however, like those
which retrieve OpenSSL's version or zlib's version, were moved to a
dedicated function to guarantee they are called late in the process.
For example, the SSL call probably requires that SSL_library_init()
has been called first.
This switches explicit calls to various trivial registration methods for
keywords, muxes or protocols from constructors to INITCALL1 at stage
STG_REGISTER. All these calls have in common to consume a single pointer
and return void. Doing this removes 26 constructors. The following calls
were addressed :
- acl_register_keywords
- bind_register_keywords
- cfg_register_keywords
- cli_register_kw
- flt_register_keywords
- http_req_keywords_register
- http_res_keywords_register
- protocol_register
- register_mux_proto
- sample_register_convs
- sample_register_fetches
- srv_register_keywords
- tcp_req_conn_keywords_register
- tcp_req_cont_keywords_register
- tcp_req_sess_keywords_register
- tcp_res_cont_keywords_register
- flt_register_keywords
In the various connect_server() functions, don't reset the connection flags,
as some may have been set before. The flags are initialized in conn_init(),
anyway.
These ones are mostly called from cfgparse.c for the parsing and do
not depend on the HTTP representation. The functions's prototypes
were moved to proto/http_rules.h, making this file work exactly like
tcp_rules. Ideally we should stop calling these functions directly
from cfgparse and register keywords, but there are a few cases where
that wouldn't work (stats http-request) so it's probably not worth
trying to go this far.
This patch improves the previous fix by implementing the socket draining
code directly in conn_sock_drain() so that it always applies regardless
of the protocol's family. Thus it gets rid of tcp_drain().
Chunks are only a subset of a buffer (a non-wrapping version with no head
offset). Despite this we still carry a lot of duplicated code between
buffers and chunks. Replacing chunks with buffers would significantly
reduce the maintenance efforts. This first patch renames the chunk's
fields to match the name and types used by struct buffers, with the goal
of isolating the code changes from the declaration changes.
Most of the changes were made with spatch using this coccinelle script :
@rule_d1@
typedef chunk;
struct chunk chunk;
@@
- chunk.str
+ chunk.area
@rule_d2@
typedef chunk;
struct chunk chunk;
@@
- chunk.len
+ chunk.data
@rule_i1@
typedef chunk;
struct chunk *chunk;
@@
- chunk->str
+ chunk->area
@rule_i2@
typedef chunk;
struct chunk *chunk;
@@
- chunk->len
+ chunk->data
Some minor updates to 3 http functions had to be performed to take size_t
ints instead of ints in order to match the unsigned length here.
fd_insert() is currently called just after setting the owner and iocb,
but proceeding like this prevents the operation from being atomic and
requires a lock to protect the maxfd computation in another thread from
meeting an incompletely initialized FD and computing a wrong maxfd.
Fortunately for now all fdtab[].owner are set before calling fd_insert(),
and the first lock in fd_insert() enforces a memory barrier so the code
is safe.
This patch moves the initialization of the owner and iocb to fd_insert()
so that the function will be able to properly arrange its operations and
remain safe even when modified to become lockless. There's no other change
beyond the internal API.
The listeners and connectors may complain that process-wide or
system-wide FD limits have been reached and will in this case report
maxfd as the limit. This is wrong in fact since there's no reason for
the whole FD space to be contiguous when the total # of FD is reached.
A better approach would consist in reporting the accurate number of
opened FDs, but this is pointless as what matters here is to give a
hint about what might be wrong. So let's simply report the configured
maxsock, which will generally explain why the process' limits were
reached, which is the most common reason. This removes another
dependency on maxfd.
Rename the global variable "proxy" to "proxies_list".
There's been multiple proxies in haproxy for quite some time, and "proxy"
is a potential source of bugs, a number of functions have a "proxy" argument,
and some code used "proxy" when it really meant "px" or "curproxy". It worked
by pure luck, because it usually happened while parsing the config, and thus
"proxy" pointed to the currently parsed proxy, but we should probably not
rely on this.
[wt: some of these are definitely fixes that are worth backporting]
All the references to connections in the data path from streams and
stream_interfaces were changed to use conn_streams. Most functions named
"something_conn" were renamed to "something_cs" for this. Sometimes the
connection still is what matters (eg during a connection establishment)
and were not always renamed. The change is significant and minimal at the
same time, and was quite thoroughly tested now. As of this patch, all
accesses to the connection from upper layers go through the pass-through
mux.
Now, each proxy contains a lock that must be used when necessary to protect
it. Moreover, all proxy's counters are now updated using atomic operations.
First, we use atomic operations to update jobs/totalconn/actconn variables,
listener's nbconn variable and listener's counters. Then we add a lock on
listeners to protect access to their information. And finally, listener queues
(global and per proxy) are also protected by a lock. Here, because access to
these queues are unusal, we use the same lock for all queues instead of a global
one for the global queue and a lock per proxy for others.
When compiled with Openssl >= 1.1.1, before attempting to do the handshake,
try to read any early data. If any early data is present, then we'll create
the session, read the data, and handle the request before we're doing the
handshake.
For this, we add a new connection flag, CO_FL_EARLY_SSL_HS, which is not
part of the CO_FL_HANDSHAKE set, allowing to proceed with a session even
before an SSL handshake is completed.
As early data do have security implication, we let the origin server know
the request comes from early data by adding the "Early-Data" header, as
specified in this draft from the HTTP working group :
https://datatracker.ietf.org/doc/html/draft-ietf-httpbis-replay
These flags are not exactly for the data layer, they instead indicate
what is expected from the transport layer. Since we're going to split
the connection between the transport and the data layers to insert a
mux layer, it's important to have a clear idea of what each layer does.
All function conn_data_* used to manipulate these flags were renamed to
conn_xprt_*.
A regression has been introduced in commit
00005ce5a1: the port being changed is the
one from 'cli_conn->addr.from' instead of 'cli_conn->addr.to'.
This patch fixes the regression.
Backport status: should be backported to HAProxy 1.7 and above.
cfgparse has no business directly calling each individual protocol's 'add'
function to create a listener. Now that they're all registered, better
perform a protocol lookup on the family and have a standard ->add method
for all of them.
It's a shame that cfgparse() has to make special cases of each protocol
just to cast the port to the target address family. Let's pass the port
in argument to the function. The unix listener simply ignores it.
Till now connections used to rely exclusively on file descriptors. It
was planned in the past that alternative solutions would be implemented,
leading to member "union t" presenting sock.fd only for now.
With QUIC, the connection will need to continue to exist but will not
rely on a file descriptor but a connection ID.
So this patch introduces a "connection handle" which is either a file
descriptor or a connection ID, to replace the existing "union t". We've
now removed the intermediate "struct sock" which was never used. There
is no functional change at all, though the struct connection was inflated
by 32 bits on 64-bit platforms due to alignment.
Try to reuse any socket from the old process, provided by the "-x" flag,
before binding a new one, assuming it is compatible.
"Compatible" here means same address and port, same namspace if any,
same interface if any, and that the following flags are the same :
LI_O_FOREIGN, LI_O_V6ONLY and LI_O_V4V6.
Also change tcp_bind_listener() to always enable/disable socket options,
instead of just doing so if it is in the configuration file, as the option
may have been removed, ie TCP_FASTOPEN may have been set in the old process,
and removed from the new configuration, so we have to disable it.
Ankit Malp reported a bug that we've had since binding to devices was
implemented. Haproxy wrongly checks that the process stays privileged
after startup when a binding to a device is specified via the bind
keyword "interface". This is wrong, because after startup we're not
binding any socket anymore, and during startup if there's a permission
issue it will be immediately reported ("permission denied"). More
importantly there's no way around it as the process exits on startup
when facing such an option.
This fix should be backported to 1.7, 1.6 and 1.5.
While testing a tcp_fastopen related change, it appeared that in the rare
case where connect() can immediately succeed, we still subscribe to write
notifications on the socket, causing the conn_fd_handler() to immediately
be called and a second call to connect() to be attempted to double-check
the connection.
In fact this issue had already been met with unix sockets (which often
respond immediately) and partially addressed but incorrect so another
patch will follow. But for TCP nothing was done.
The fix consists in removing the WAIT_L4_CONN flag if connect() succeeds
and to subscribe for writes only if some handshakes or L4_CONN are still
needed. In addition in order not to fail raw TCP health checks, we have
to continue to enable polling for data when nothing is scheduled for
leaving and the connection is already established, otherwise the caller
will never be notified.
This fix should be backported to 1.7 and 1.6.
