This is in order to simplify the PPv2 header parsing code to look more
like the one provided as an example in the spec. No code change was
performed beyond just merging the proxy_addr union into the proxy_hdr_v2
struct.
This patch adds support for captures with no header name. The purpose
is to allow extra captures to be defined and logged along with the
header captures.
When no static DH parameters are specified, this patch makes haproxy
use standardized (rfc 2409 / rfc 3526) DH parameters with prime lenghts
of 1024, 2048, 4096 or 8192 bits for DHE key exchange. The size of the
temporary/ephemeral DH key is computed as the minimum of the RSA/DSA server
key size and the value of a new option named tune.ssl.default-dh-param.
Dmitry Sivachenko reported that "uint" doesn't build on FreeBSD 10.
On Linux it's defined in sys/types.h and indicated as "old". Just
get rid of the very few occurrences.
One important aspect of SSL performance tuning is the cache size,
but there's no metric to know whether it's large enough or not. This
commit introduces two counters, one for the cache lookups and another
one for cache misses. These counters are reported on "show info" on
the stats socket. This way, it suffices to see the cache misses
counter constantly grow to know that a larger cache could possibly
help.
It's commonly needed to know how many SSL asymmetric keys are computed
per second on either side (frontend or backend), and to know the SSL
session reuse ratio. Now we compute these values and report them in
"show info".
Currently exp_replace() (which is used in reqrep/reqirep) is
vulnerable to a buffer overrun. I have been able to reproduce it using
the attached configuration file and issuing the following command:
wget -O - -S -q http://localhost:8000/`perl -e 'print "a"x4000'`/cookie.php
Str was being checked only in in while (str) and it was possible to
read past that when more than one character was being accessed in the
loop.
WT:
Note that this bug is only marked MEDIUM because configurations
capable of triggering this bug are very unlikely to exist at all due
to the fact that most rewrites consist in static string additions
that largely fit into the reserved area (8kB by default).
This fix should also be backported to 1.4 and possibly even 1.3 since
it seems to have been present since 1.1 or so.
Config:
-------
global
maxconn 500
stats socket /tmp/haproxy.sock mode 600
defaults
timeout client 1000
timeout connect 5000
timeout server 5000
retries 1
option redispatch
listen stats
bind :8080
mode http
stats enable
stats uri /stats
stats show-legends
listen tcp_1
bind :8000
mode http
maxconn 400
balance roundrobin
reqrep ^([^\ :]*)\ /(.*)/(.*)\.php(.*) \1\ /\3.php?arg=\2\2\2\2\2\2\2\2\2\2\2\2\2\4
server srv1 127.0.0.1:9000 check port 9000 inter 1000 fall 1
server srv2 127.0.0.1:9001 check port 9001 inter 1000 fall 1
Agent will have the ability to return a weight without indicating an
up/down status. Currently this is not possible, so let's add a 5th
result CHK_RES_NEUTRAL for this purpose. It has been mapped to the
unused HCHK_STATUS_CHECKED which already serves as a neutral delimitor
between initiated checks and those returning a result.
Instead of enabling/disabling maintenance mode and drain mode separately
using 4 actions, we now offer 3 simplified actions :
- set state to READY
- set state to DRAIN
- set state to MAINT
They have the benefit of reporting the same state as displayed on the page,
and of doing the double-switch atomically eg when switching from drain to
maint.
Note that the old actions are still supported for users running scripts.
This patch adds support for a new "drain" mode. So now we have 3 admin
modes for a server :
- READY
- DRAIN
- MAINT
The drain mode disables load balancing but leaves the server up. It can
coexist with maint, except that maint has precedence. It is also inherited
from tracked servers, so just like maint, it's represented with 2 bits.
New functions were designed to set/clear each flag and to propagate the
changes to tracking servers when relevant, and to log the changes. Existing
functions srv_set_adm_maint() and srv_set_adm_ready() were replaced to make
use of the new functions.
Currently the drain mode is not yet used, however the whole logic was tested
with all combinations of set/clear of both flags in various orders to catch
all corner cases.
This function was taken from check_set_server_drain(). It does not
consider health checks at all and only sets a server to stopping
provided it's not in maintenance and is not currently stopped. The
resulting state will be STOPPING. The state change is propagated
to tracked servers.
For now the function is not used, but the goal is to split health
checks status from server status and to be able to change a server's
state regardless of health checks statuses.
This function was taken from check_set_server_up(). It does not consider
health checks at all and only sets a server up provided it's not in
maintenance. The resulting state may be either RUNNING or STARTING
depending on the presence of a slowstart or not. The state change is
propagated to tracked servers.
For now the function is not used, but the goal is to split health
checks status from server status and to be able to change a server's
state regardless of health checks statuses.
This function was extracted from check_set_server_down(). In only
manipulates the server state and does not consider the health checks
at all, nor does it modify their status. It takes a reason message to
report in logs, however it passes NULL when recursing through the
trackers chain.
For now the function is not used, but the goal is to split health
checks status from server status and to be able to change a server's
state regardless of health checks statuses.
srv_adm_append_status() was renamed srv_append_status() since it's no
more dedicated to maintenance mode. It now supports a reason which if
not null is appended to the output string.
We don't have to handle the maintenance transition here anymore so we
can simplify the functions and conditions. This also means that we don't
need the disable/enable functions but only a function to switch to each
new state.
It's worth mentionning that at this stage there are still confusions
between the server state and the checks states. For example, the health
check's state is adjusted from tracked servers changing state, while it
should not be.
This change now involves a new flag SRV_ADMF_IMAINT to note that the
maintenance status of a server is inherited from another server. Thus,
we know at each server level in the chain if it's running, in forced
maintenance or in a maintenance status because it tracks another server,
or even in both states.
Disabling a server propagates this flag down to other servers. Enabling
a server flushes the flag down. A server becomes up again once both of
its flags are cleared.
Two new functions "srv_adm_set_maint()" and "srv_adm_set_ready()" are used to
manipulate this maintenance status. They're used by the CLI and the stats
page.
Now the stats page always says "MAINT" instead of "MAINT(via)" and it's
only the chk/down field which reports "via x/y" when the status is
inherited from another server, but it doesn't say it when a server was
forced into maintenance. The CSV output indicates "MAINT (via x/y)"
instead of only "MAINT(via)". This is the most accurate representation.
One important thing is that now entering/leaving maintenance for a
tracking server correctly follows the state of the tracked server.
Checks.c has become a total mess. A number of proxy or server maintenance
and queue management functions were put there probably because they were
used there, but that makes the code untouchable. And that's without saying
that their names does not always relate to what they really do!
So let's do a first pass by moving these ones :
- set_backend_down() => backend.c
- redistribute_pending() => queue.c:pendconn_redistribute()
- check_for_pending() => queue.c:pendconn_grab_from_px()
- shutdown_sessions => server.c:srv_shutdown_sessions()
- shutdown_backup_sessions => server.c:srv_shutdown_backup_sessions()
All of them were moved at once.
Servers used to have 3 flags to store a state, now they have 4 states
instead. This avoids lots of confusion for the 4 remaining undefined
states.
The encoding from the previous to the new states can be represented
this way :
SRV_STF_RUNNING
| SRV_STF_GOINGDOWN
| | SRV_STF_WARMINGUP
| | |
0 x x SRV_ST_STOPPED
1 0 0 SRV_ST_RUNNING
1 0 1 SRV_ST_STARTING
1 1 x SRV_ST_STOPPING
Note that the case where all bits were set used to exist and was randomly
dealt with. For example, the task was not stopped, the throttle value was
still updated and reported in the stats and in the http_server_state header.
It was the same if the server was stopped by the agent or for maintenance.
It's worth noting that the internal function names are still quite confusing.
Now we introduce srv->admin and srv->prev_admin which are bitfields
containing one bit per source of administrative status (maintenance only
for now). For the sake of backwards compatibility we implement a single
source (ADMF_FMAINT) but the code already checks any source (ADMF_MAINT)
where the STF_MAINTAIN bit was previously checked. This will later allow
us to add ADMF_IMAINT for maintenance mode inherited from tracked servers.
Along doing these changes, it appeared that some places will need to be
revisited when implementing the inherited bit, this concerns all those
modifying the ADMF_FMAINT bit (enable/disable actions on the CLI or stats
page), and the checks to report "via" on the stats page. But currently
the code is harmless.
Till now, the server's state and flags were all saved as a single bit
field. It causes some difficulties because we'd like to have an enum
for the state and separate flags.
This commit starts by splitting them in two distinct fields. The first
one is srv->state (with its counter-part srv->prev_state) which are now
enums, but which still contain bits (SRV_STF_*).
The flags now lie in their own field (srv->flags).
The function srv_is_usable() was updated to use the enum as input, since
it already used to deal only with the state.
Note that currently, the maintenance mode is still in the state for
simplicity, but it must move as well.
When run in daemon mode (i.e. with at least one forked process) and using
the epoll poller, sending USR1 (graceful shutdown) to the worker processes
can cause some workers to start running at 100% CPU. Precondition is having
an established HTTP keep-alive connection when the signal is received.
The cloned (during fork) listening sockets do not get closed in the parent
process, thus they do not get removed from the epoll set automatically
(see man 7 epoll). This can lead to the process receiving epoll events
that it doesn't feel responsible for, resulting in an endless loop around
epoll_wait() delivering these events.
The solution is to explicitly remove these file descriptors from the epoll
set. To not degrade performance, care was taken to only do this when
neccessary, i.e. when the file descriptor was cloned during fork.
Signed-off-by: Conrad Hoffmann <conrad@soundcloud.com>
[wt: a backport to 1.4 could be studied though chances to catch the bug are low]
We used to call srv_is_usable() with either the current state and weights
or the previous ones. This causes trouble for future changes, so let's first
split it in two variants :
- srv_is_usable(srv) considers the current status
- srv_was_usable(srv) considers the previous status
Detecting that a server's status has changed is a bit messy, as well
as it is to commit the status changes. We'll have to add new conditions
soon and we'd better avoid to multiply the number of touched locations
with the high risk of forgetting them.
This commit introduces :
- srv_lb_status_changed() to report if the status changed from the
previously committed one ;
- svr_lb_commit_status() to commit the current status
The function is now used by all load-balancing algorithms.
This flag is only a copy of (srv->uweight == 0), so better get rid of
it to reduce some of the confusion that remains in the code, and use
a simple function to return this state based on this weight instead.
Long-lived sessions are often subject to half-closed sessions resulting in
a lot of sessions appearing in FIN_WAIT state in the system tables, and no
way for haproxy to get rid of them. This typically happens because clients
suddenly disconnect without sending any packet (eg: FIN or RST was lost in
the path), and while the server detects this using an applicative heart
beat, haproxy does not close the connection.
This patch adds two new timeouts : "timeout client-fin" and
"timeout server-fin". The former allows one to override the client-facing
timeout when a FIN has been received or sent. The latter does the same for
server-facing connections, which is less useful.
git.1wt.eu is painfully slow and some people experience issues with
it. Better hide it and only advertise git.haproxy.org which is mirrored
on a faster server.
Also replace haproxy.1wt.eu with www.haproxy.org in the download URL
which appears in the stats page.
Being able to map prefixes to values is already used for IPv4/IPv6
but was not yet used with strings. It can be very convenient to map
directories to server farms but large lists may be slow.
By using ebmb_insert_prefix() and ebmb_lookup_longest(), we can
insert strings with their own length as a prefix, and lookup
candidate strings and ensure that the longest matching one will
be returned, which is the longest string matching the entry.
The is_addr() function indicates if an address is set and is an IPv4
or IPv6 address. Let's rename it is_inet_addr() and make is_addr()
also accept AF_UNIX addresses.
Some consistency checks cannot be performed between frontends, backends
and peers at the moment because there is no way to check for intersection
between processes bound to some processes when the number of processes is
higher than the number of bits in a word.
So first, let's limit the number of processes to the machine's word size.
This means nbproc will be limited to 32 on 32-bit machines and 64 on 64-bit
machines. This is far more than enough considering that configs rarely go
above 16 processes due to scalability and management issues, so 32 or 64
should be fine.
This way we'll ensure we can always build a mask of all the processes a
section is bound to.
This commit modifies the PROXY protocol V2 specification to support headers
longer than 255 bytes allowing for optional extensions. It implements the
PROXY protocol V2 which is a binary representation of V1. This will make
parsing more efficient for clients who will know in advance exactly how
many bytes to read. Also, it defines and implements some optional PROXY
protocol V2 extensions to send information about downstream SSL/TLS
connections. Support for PROXY protocol V1 remains unchanged.
Process shared mutex seems not supported on some OSs (FreeBSD).
This patch checks errors on mutex lock init to fallback
on a private session cache (per process cache) in error cases.
Trying to build with an old gcc and glibc revealed that we must not
state "inline" in our _syscall* definitions since it's already present
in the declaration making use of the _syscall* macros.
On the mailing list, seri0528@naver.com reported an issue when
using balance url_param or balance uri. The request would sometimes
stall forever.
Cyril Bont managed to reproduce it with the configuration below :
listen test :80
mode http
balance url_param q
hash-type consistent
server s demo.1wt.eu:80
and found it appeared with this commit : 80a92c0 ("BUG/MEDIUM: http:
don't start to forward request data before the connect").
The bug is subtle but real. The problem is that the HTTP request
forwarding analyzer refrains from starting to parse the request
body when some LB algorithms might need the body contents, in order
to preserve the data pointer and avoid moving things around during
analysis in case a redispatch is later needed. And in order to detect
that the connection establishes, it watches the response channel's
CF_READ_ATTACHED flag.
The problem is that a request analyzer is not subscribed to a response
channel, so it will only see changes when woken for other (generally
correlated) reasons, such as the fact that part of the request could
be sent. And since the CF_READ_ATTACHED flag is cleared once leaving
process_session(), it is important not to miss it. It simply happens
that sometimes the server starts to respond in a sequence that validates
the connection in the middle of process_session(), that it is detected
after the analysers, and that the newly assigned CF_READ_ATTACHED is
not used to detect that the request analysers need to be called again,
then the flag is lost.
The CF_WAKE_WRITE flag doesn't work either because it's cleared upon
entry into process_session(), ie if we spend more than one call not
connecting.
Thus we need a new flag to tell the connection initiator that we are
specifically interested in being notified about connection establishment.
This new flag is CF_WAKE_CONNECT. It is set by the requester, and is
cleared once the connection succeeds, where CF_WAKE_ONCE is set instead,
causing the request analysers to be scanned again.
For future versions, some better options will have to be considered :
- let all analysers subscribe to both request and response events ;
- let analysers subscribe to stream interface events (reduces number
of useless calls)
- change CF_WAKE_WRITE's semantics to persist across calls to
process_session(), but that is different from validating a
connection establishment (eg: no data sent, or no data to send)
The bug was introduced in 1.5-dev23, no backport is needed.
Till now we used to return a pointer to a rule, but that makes it
complicated to later add support for registering new actions which
may fail. For example, the redirect may fail if the response is too
large to fit into the buffer.
So instead let's return a verdict. But we needed the pointer to the
last rule to get the address of a redirect and to get the realm used
by the auth page. So these pieces of code have moved into the function
and they produce a verdict.
Last fix did address the issue for inlined patterns, but it was not
enough because the flags are lost as well when updating patterns
dynamically over the CLI.
Also if the same file was used once with -i and another time without
-i, their references would have been merged and both would have used
the same matching method.
It's appear that the patterns have two types of flags. The first
ones are relative to the pattern matching, and the second are
relative to the pattern storage. The pattern matching flags are
the same for all the patterns of one expression. Now they are
stored in the expression. The storage flags are information
returned by the pattern mathing function. This information is
relative to each entry and is stored in the "struct pattern".
Now, the expression matching flags are forwarded to the parse
and index functions. These flags are stored during the
configuration parsing, and they are used during the parse and
index actions.
This issue was introduced in dev23 with the major pattern rework,
and is a continuation of commit a631fc8 ("BUG/MAJOR: patterns: -i
and -n are ignored for inlined patterns"). No backport is needed.
These flags are only passed to pattern_read_from_file() which
loads the patterns from a file. The functions used to parse the
patterns from the current line do not provide the means to pass
the pattern flags so they're lost.
This issue was introduced in dev23 with the major pattern rework,
and was reported by Graham Morley. No backport is needed.
Using the previous callback, it's trivial to block the heartbeat attack,
first we control the message length, then we emit an SSL error if it is
out of bounds. A special log is emitted, indicating that a heartbleed
attack was stopped so that they are not confused with other failures.
That way, haproxy can protect itself even when running on an unpatched
SSL stack. Tests performed with openssl-1.0.1c indicate a total success.
Users have seen a huge increase in the rate of SSL handshake failures
starting from 2014/04/08 with the release of the Heartbleed OpenSSL
vulnerability (CVE-2014-0160). Haproxy can detect that a heartbeat
was received in the incoming handshake, and such heartbeats are not
supposed to be common, so let's log a different message when a
handshake error happens after a heartbeat is detected.
This patch only adds the new message and the new code.
The http_(res|req)_keywords_register() functions allow to register
new keywords.
You need to declare a keyword list:
struct http_req_action_kw_list test_kws = {
.scope = "testscope",
.kw = {
{ "test", parse_test },
{ NULL, NULL },
}
};
and a parsing function:
int parse_test(const char **args, int *cur_arg, struct proxy *px, struct http_req_rule *rule, char **err)
{
rule->action = HTTP_REQ_ACT_CUSTOM_STOP;
rule->action_ptr = action_function;
return 0;
}
http_req_keywords_register(&test_kws);
The HTTP_REQ_ACT_CUSTOM_STOP action stops evaluation of rules after
your rule, HTTP_REQ_ACT_CUSTOM_CONT permits the evaluation of rules
after your rule.
This patch allows manipulation of ACL and MAP content thanks to any
information available in a session: source IP address, HTTP request or
response header, etc...
It's an update "on the fly" of the content of the map/acls. This means
it does not resist to reload or restart of HAProxy.
Finn Arne Gangstad suggested that we should have the ability to break
keep-alive when the target server has reached its maxconn and that a
number of connections are present in the queue. After some discussion
around his proposed patch, the following solution was suggested : have
a per-proxy setting to fix a limit to the number of queued connections
on a server after which we break keep-alive. This ensures that even in
high latency networks where keep-alive is beneficial, we try to find a
different server.
This patch is partially based on his original proposal and implements
this configurable threshold.
All the code inherited from version 1.1 still holds a lot ot sessions
called "t" because in 1.1 they were tasks. This naming is very annoying
and sometimes even confusing, for example in code involving tables.
Let's get rid of this once for all and before 1.5-final.
Nothing changed beyond just carefully renaming these variables.
This basically reimplements commit f3221f9 ("MEDIUM: stats: add support
for HTTP keep-alive on the stats page") which was reverted by commit
51437d2 after Igor Chan reported a broken stats page caused by the bug
fix by previous commit.
In order to avoid abusively relying on buf->o to guess how many bytes to
rewind during a redispatch, we now clear msg->sov. Thus the meaning of this
field is exactly "how many bytes of headers are left to be forwarded". It
is still possible to rewind because msg->eoh + msg->eol equal that value
before scheduling the forwarding, so we can always subtract them.
http_body_rewind() returns the number of bytes to rewind before buf->p to
find the message's body. It relies on http_hdr_rewind() to find the beginning
and adds msg->eoh + msg->eol which are always safe.
http_data_rewind() does the same to get the beginning of the data, which
differs from above when a chunk is present. It uses the function above and
adds msg->sol.
The purpose is to centralize further ->sov changes aiming at avoiding
to rely on buf->o.
http_uri_rewind() returns the number of bytes to rewind before buf->p to
find the URI. It relies on http_hdr_rewind() to find the beginning and
is just here to simplify operations.
The purpose is to centralize further ->sov changes aiming at avoiding
to rely on buf->o.
http_hdr_rewind() returns the number of bytes to rewind before buf->p to
find the beginning of headers. At the moment it's not exact as it still
relies on buf->o, assuming that no other data from a past message were
pending there, but it's what was done till there.
The purpose is to centralize further ->sov changes aiming at avoiding
to rely on buf->o.
http_body_bytes() returns the number of bytes of the current message body
present in the buffer. It is compatible with being called before and after
the headers are forwarded.
This is done to centralize further ->sov changes.
There are still some pending issues in the gzip compressor, and fixing
them requires a better handling of intermediate parsing states.
Another issue to deal with is the rewinding of a buffer during a redispatch
when a load balancing algorithm involves L7 data because the exact amount of
data to rewind is not clear. At the moment, this is handled by unwinding all
pending data, which cannot work in responses due to pipelining.
Last, having a first analysis which parses the body and another one which
restarts from where the parsing was left is wrong. Right now it only works
because we never both parse and transform in the same direction. But that
is wrong anyway.
In order to address the first issue, we'll have to use msg->eoh + msg->eol
to find the end of headers, and we still need to store the information about
the forwarded header length somewhere (msg->sol might be reused for this).
msg->sov may only be used for the start of data and not for subsequent chunks
if possible. This first implies that we stop sharing it with header length,
and stop using msg->sol there. In fact we don't need it already as it is
always zero when reaching the HTTP_MSG_BODY state. It was only updated to
reflect a copy of msg->sov.
So now as a first step into that direction, this patch ensure that msg->sol
is never re-assigned after being set to zero and is not used anymore when
we're dealing with HTTP processing and forwarding. We'll later reuse it
differently but for now it's secured.
The patch does nothing magic, it only removes msg->sol everywhere it was
already zero and avoids setting it. In order to keep the sov-sol difference,
it now resets sov after forwarding data. In theory there's no problem here,
but the patch is still tagged major because that code is complex.
One of the issues we face when we need to either forward headers only
before compressing, or rewind the stream during a redispatch is to know
the proper length of the request headers. msg->eoh always has the total
length up to the last CRLF, and we never know whether the request ended
with a single LF or a standard CRLF. This makes it hard to rewind the
headers without explicitly checking the bytes in the buffer.
Instead of doing so, we now use msg->eol to carry the length of the last
CRLF (either 1 or 2). Since it is not modified at all after HTTP_MSG_BODY,
and was only left in an undefined state, it is safe to use at any moment.
Thus, the complete header length to forward or to rewind now is always
msg->eoh + msg->eol.
This is the continuation of previous patch. Now that full buffers are
not rejected anymore, let's wait for at least the advertised chunk or
body length to be present or the buffer to be full. When either
condition is met, the message processing can go forward.
Thus we don't need to use url_param_post_limit anymore, which was passed
in the configuration as an optionnal <max_wait> parameter after the
"check_post" value. This setting was necessary when the feature was
implemented because there was no support for parsing message bodies.
The argument is now silently ignored if set in the configuration.
The function addr_to_stktable_key doesn't consider the expected
type of key. If the stick table key is based on IPv6 addresses
and the input is IPv4, the returned key is IPv4 adddress and his
length is 4 bytes, while is expected 16 bytes key.
This patch considers the expected key and try to convert IPv4 to
IPv6 and IPv6 to IPv4 according with the expected key.
This fixes the bug reported by Apollon Oikonomopoulos.
This bug was introduced somewhere in the 1.5-dev process.
When compiled with USE_GETADDRINFO, make sure we use getaddrinfo(3) to
perform name lookups. On default dual-stack setups this will change the
behavior of using IPv6 first. Global configuration option
'nogetaddrinfo' can be used to revert to deprecated gethostbyname(3).
Commit 6f7203d ("MEDIUM: pattern: add prune function") introduced an
array of functions pat_prune_fcts[] but unfortunately declared it in
pattern.h without marking it "extern", resulting in each file including
it having its own copy.
The cfgparse.c file becomes huge, and a large part of it comes from the
server keyword parser. Since the configuration is a bit more modular now,
move this parser to server.c.
This patch also moves the check of the "server" keyword earlier in the
supported keywords list, resulting in a slightly faster config parsing
for configs with large numbers of servers (about 10%).
No functional change was made, only the code was moved.
We have a use case where we look up a customer ID in an HTTP header
and direct it to the corresponding server. This can easily be done
using ACLs and use_backend rules, but the configuration becomes
painful to maintain when the number of customers grows to a few
tens or even a several hundreds.
We realized it would be nice if we could make the use_backend
resolve its name at run time instead of config parsing time, and
use a similar expression as http-request add-header to decide on
the proper backend to use. This permits the use of prefixes or
even complex names in backend expressions. If no name matches,
then the default backend is used. Doing so allowed us to get rid
of all the use_backend rules.
Since there are some config checks on the use_backend rules to see
if the referenced backend exists, we want to keep them to detect
config errors in normal config. So this patch does not modify the
default behaviour and proceeds this way :
- if the backend name in the use_backend directive parses as a log
format rule, it's used as-is and is resolved at run time ;
- otherwise it's a static name which must be valid at config time.
There was the possibility of doing this with the use-server directive
instead of use_backend, but it seems like use_backend is more suited
to this task, as it can be used for other purposes. For example, it
becomes easy to serve a customer-specific proxy.pac file based on the
customer ID by abusing the errorfile primitive :
use_backend bk_cust_%[hdr(X-Cust-Id)] if { hdr(X-Cust-Id) -m found }
default_backend bk_err_404
backend bk_cust_1
errorfile 200 /etc/haproxy/static/proxy.pac.cust1
Signed-off-by: Bertrand Jacquin <bjacquin@exosec.fr>
This patch permit to register new sections in the haproxy's
configuration file. This run like all the "keyword" registration, it is
used during the haproxy initialization, typically with the
"__attribute__((constructor))" functions.
The function url2sa() converts faster url like http://<ip>:<port> in a
struct sockaddr_storage. This patch add:
- the https support
- permit to return the length parsed
- support IPv6
- support DNS synchronous resolution only during start of haproxy.
The faster IPv4 convertion way is keeped. IPv6 is slower, because I use
the standard IPv6 parser function.
This function it is used for dynamically update all the patterns
attached to one file. This function is atomic. All parsing or indexation
failures are reported in the haproxy logs.
This patch replace a lot of pointeur by pattern matching identifier. If
the declared ACL use all the predefined pattern matching functions, the
register function gets the functions provided by "pattern.c" and
identified by the PAT_LATCH_*.
In the case of the acl uses his own functions, they can be declared, and
the acl registration doesn't change it.
This flag is no longer used. The last place using this, are the display
of the result of pattern matching in the cli command "get map" or "get
acl".
The first parameter of this command is the reference of the file used to
perform the lookup.
The function str2net runs DNS resolution if valid ip cannot be parsed.
The DNS function used is the standard function of the libc and it
performs asynchronous request.
The asynchronous request is not compatible with the haproxy
archictecture.
str2net() is used during the runtime throught the "socket".
This patch remove the DNS resolution during the runtime.
The pointer <regstr> is only used to compare and identify the original
regex string with the patterns. Now the patterns have a reference map
containing this original string. It is useless to store this value two
times.
This patch adds new display type. This display returns allocated string,
when the string is flush into buffers, it is freed. This permit to
return the content of "memprintf(err, ...)" messages.
The pat_ref_add functions has changed to return error.
The format of the acl file are not the same than the format of the map
files. In some case, the same file can be used, but this is ambiguous
for the user because the patterns are not the expected.
The acl and map function do the same work with the file parsing. This
patch merge these code in only one.
Note that the function map_read_entries_from_file() in the file "map.c"
is moved to the the function pat_ref_read_from_file_smp() in the file
"pattern.c". The code of this function is not modified, only the the
name and the arguments order has changed.
The find_smp search the smp using the value of the pat_ref_elt pointer.
The pat_find_smp_* are no longer used. The function pattern_find_smp()
known all pattern indexation, and can be found
All the pattern delete function can use her reference to the original
"struct pat_ref_elt" to find the element to be remove. The functions
pat_del_list_str() and pat_del_meth() were deleted because after
applying this modification, they have the same code than pat_del_list_ptr().
Now, each pattern entry known the original "struct pat_ref_elt" from
that was built. This patch permit to delete each pattern entry without
confusion. After this patch, each reference can use his pointer to be
targeted.
The pattern reference are stored with two identifiers: the unique_id and
the reference.
The reference identify a file. Each file with the same name point to the
same reference. We can register many times one file. If the file is
modified, all his dependencies are also modified. The reference can be
used with map or acl.
The unique_id identify inline acl. The unique id is unique for each acl.
You cannot force the same id in the configuration file, because this
repport an error.
The format of the acl and map listing through the "socket" has changed
for displaying these new ids.
This patch extract the expect_type variable from the "struct pattern" to
"struct pattern_head". This variable is set during the declaration of
ACL and MAP. With this change, the function "pat_parse_len()" become
useless and can be replaced by "pat_parse_int()".
Implicit ACLs by default rely on the fetch's output type, so let's simply do
the same for all other ones. It has been verified that they all match.
Sometimes the same pattern file is used with the same index, parse and
parse_smp functions. If this two condition are true, these two pattern
are identical and the same struct can be used.
This patch add the following socket command line options:
show acl [<id>]
clear acl <id>
get acl <id> <pattern>
del acl <id> <pattern>
add acl <id> <pattern>
The system used for maps is backported in the pattern functions.
Some functions needs to change the sample associated to pattern. This
new pointer permit to return the a pointer to the sample pointer. The
caller can use or change the value.
This commit adds a delete function for patterns. It looks up all
instances of the pattern to delete and deletes them all. The fetch
keyword declarations have been extended to point to the appropriate
delete function.
This commit adds second tree node in the pattern struct and use it to
index IPv6 addresses. This commit report feature used in the list. If
IPv4 not match the tree, try to convert the IPv4 address in IPv6 with
prefixing the IPv4 address by "::ffff", after this operation, the match
function try lookup in the IPv6 tree. If the IPv6 sample dont match the
IPv6 tree, try to convert the IPv6 addresses prefixed by "2002:IPv4",
"::ffff:IPv4" and "::0000:IPv4" in IPv4 address. after this operation,
the match function try lookup in the IPv4 tree.
The match function known the format of the pattern. The pattern can be
stored in a list or in a tree. The pattern matching function use itself
the good entry point and indexation type.
Each pattern matching function return the struct pattern that match. If
the flag "fill" is set, the struct pattern is filled, otherwise the
content of this struct must not be used.
With this feature, the general pattern matching function cannot have
exceptions for building the "struct pattern".
Before this commit, the pattern_exec_match() function returns the
associate sample, the associate struct pattern or the associate struct
pattern_tree. This is complex to use, because we can check the type of
information returned.
Now the function return always a "struct pattern". If <fill> is not set,
only the value of the pointer can be used as boolean (NULL or other). If
<fill> is set, you can use the <smp> pointer and the pattern
information.
If information must be duplicated, it is stored in trash buffer.
Otherwise, the pattern can point on existing strings.
The method are actuelly stored using two types. Integer if the method is
known and string if the method is not known. The fetch is declared as
UINT, but in some case it can provides STR.
This patch create new type called METH. This type contain interge for
known method and string for the other methods. It can be used with
automatic converters.
The pattern matching can expect method.
During the free or prune function, http_meth pettern is freed. This
patch initialise the freed pointer to NULL.
The operations applied on types SMP_T_CSTR and SMP_T_STR are the same,
but the check code and the declarations are double, because it must
declare action for SMP_T_C* and SMP_T_*. The declared actions and checks
are the same. this complexify the code. Only the "conv" functions can
change from "C*" to "*"
Now, if a function needs to modify input string, it can call the new
function smp_dup(). This one duplicate data in a trash buffer.
The pattern parse functions put the parsed result in a "struct pattern"
without memory allocation. If the pattern must reference the input data
without changes, the pattern point to the parsed string. If buffers are
needed to store translated data, it use th trash buffer. The indexation
function that allocate the memory later if it is needed.
Before this patch, the indexation function check the declared patttern
matching function and index the data according with this function. This
is not useful to add some indexation mode.
This commit adds dedicated indexation function. Each struct pattern is
associated with one indexation function. This function permit to index
data according with the type of pattern and with the type of match.
This commit separes the "struct list" used for the chain the "struct
pattern" which contain the pattern data. Later, this change will permit
to manipulate lists ans trees with the same "struct pattern".
Each pattern parser take only one string. This change is reported to the
function prototype of the function "pattern_register()". Now, it is
called with just one string and no need to browse the array of args.
After the previous patches, the "pat_parse_strcat()" function disappear,
and the "pat_parse_int()" and "pat_parse_dotted_ver()" functions dont
use anymore the "opaque" argument, and take only one string on his
input.
So, after this patch, each pattern parser no longer use the opaque
variable and take only one string as input. This patch change the
prototype of the pattern parsing functions.
Now, the "char **args" is replaced by a "char *arg", the "int *opaque"
is removed and these functions return 1 in succes case, and 0 if fail.
The goal of these patch is to simplify the prototype of
"pat_pattern_*()" functions. I want to replace the argument "char
**args" by a simple "char *arg" and remove the "opaque" argument.
"pat_parse_int()" and "pat_parse_dotted_ver()" are the unique pattern
parser using the "opaque" argument and using more than one string
argument of the char **args. These specificities are only used with ACL.
Other systems using this pattern parser (MAP and CLI) just use one
string for describing a range.
This two functions can read a range, but the min and the max must y
specified. This patch extends the syntax to describe a range with
implicit min and max. This is used for operators like "lt", "le", "gt",
and "ge". the syntax is the following:
":x" -> no min to "x"
"x:" -> "x" to no max
This patch moves the parsing of the comparison operator from the
functions "pat_parse_int()" and "pat_parse_dotted_ver()" to the acl
parser. The acl parser read the operator and the values and build a
volatile string readable by the functions "pat_parse_int()" and
"pat_parse_dotted_ver()". The transformation is done with these rules:
If the parser is "pat_parse_int()":
"eq x" -> "x"
"le x" -> ":x"
"lt x" -> ":y" (with y = x - 1)
"ge x" -> "x:"
"gt x" -> "y:" (with y = x + 1)
If the parser is "pat_parse_dotted_ver()":
"eq x.y" -> "x.y"
"le x.y" -> ":x.y"
"lt x.y" -> ":w.z" (with w.z = x.y - 1)
"ge x.y" -> "x.y:"
"gt x.y" -> "w.z:" (with w.z = x.y + 1)
Note that, if "y" is not present, assume that is "0".
Now "pat_parse_int()" and "pat_parse_dotted_ver()" accept only one
pattern and the variable "opaque" is no longer used. The prototype of
the pattern parsers can be changed.
This patch remove the limit of 32 groups. It also permit to use standard
"pat_parse_str()" function in place of "pat_parse_strcat()". The
"pat_parse_strcat()" is no longer used and its removed. Before this
patch, the groups are stored in a bitfield, now they are stored in a
list of strings. The matching is slower, but the number of groups is
low and generally the list of allowed groups is short.
The fetch function "smp_fetch_http_auth_grp()" used with the name
"http_auth_group" return valid username. It can be used as string for
displaying the username or with the acl "http_auth_group" for checking
the group of the user.
Maybe the names of the ACL and fetch methods are no longer suitable, but
I keep the current names for conserving the compatibility with existing
configurations.
The function "userlist_postinit()" is created from verification code
stored in the big function "check_config_validity()". The code is
adapted to the new authentication storage system and it is moved in the
"src/auth.c" file. This function is used to check the validity of the
users declared in groups and to check the validity of groups declared
on the "user" entries.
This resolve function is executed before the check of all proxy because
many acl needs solved users and groups.
The binary samples are sometimes copied as is into http headers.
A sample can contain bytes unallowed by the http rfc concerning
header content, for example if it was extracted from binary data.
The resulting http request can thus be invalid.
This issue does not yet happen because haproxy currently (mistakenly)
hex-encodes binary data, so it is not really possible to retrieve
invalid HTTP chars.
The solution consists in hex-encoding all non-printable chars prefixed
by a '%' sign.
No backport is needed since existing code is not affected yet.
Large configurations can take time to parse when thousands of backends
are in use. Let's store all the proxies in trees.
findproxy_mode() has been modified to use the tree for lookups, which
has divided the parsing time by about 2.5. But many lookups are still
present at many places and need to be dealt with.
Currently, "balance url_param check_post" randomly works. If the client
sends chunked data and there's another chunk after the one containing the
data, http_request_forward_body() will advance msg->sov and move the start
of data to the beginning of the last chunk, and get_server_ph_post() will
not find the data.
In order to avoid this, we add an HTTP_MSGF_WAIT_CONN flag whose goal is
to prevent the forwarding code from parsing until the connection is
confirmed, so that we're certain not to fail on a redispatch. Note that
we need to force channel_auto_connect() since the output buffer is empty
and a previous analyser might have stopped auto-connect.
The flag is currently set whenever some L7 POST analysis is needed for a
connect() so that it correctly addresses all corner cases involving a
possible rewind of the buffer, waiting for a better fix.
Note that this has been broken for a very long time. Even all 1.4 versions
seem broken but differently, with ->sov pointing to the end of the arguments.
So the fix should be considered for backporting to all stable releases,
possibly including 1.3 which works differently.
Finn Arne Gangstad reported that commit 6b726adb35 ("MEDIUM: http: do
not report connection errors for second and further requests") breaks
support for serving static files by abusing the errorfile 503 statement.
Indeed, a second request over a connection sent to any server or backend
returning 503 would silently be dropped.
The proper solution consists in adding a flag on the session indicating
that the server connection was reused, and to only avoid the error code
in this case.
The new tune.idletimer value allows one to set a different value for
idle stream detection. The default value remains set to one second.
It is possible to disable it using zero, and to change the default
value at build time using DEFAULT_IDLE_TIMER.
We store the time stamp of last read in the channel in order to
be able to measure some bit rate and pause lengths. We only use
16 bits which were unused for this. We don't need more, as it
allows us to measure with a millisecond precision for up to 65s.
These ones are only reset during transfers. There is a low but non-null
risk that a first full read causes the previous value to be reused and
immediately to immediately set the CF_STREAMER flag. The impact is only
to increase earlier than expected the SSL record size and to use splice().
This bug was already present in 1.4, so a backport is possible.
Summary:
Track and report last session time on the stats page for each server
in every backend, as well as the backend.
This attempts to address the requirement in the ROADMAP
- add a last activity date for each server (req/resp) that will be
displayed in the stats. It will be useful with soft stop.
The stats page reports this as time elapsed since last session. This
change does not adequately address the requirement for long running
session (websocket, RDP... etc).
By having the stream interface pass the CF_STREAMER flag to the
snd_buf() primitive, we're able to tell the send layer whether
we're sending large chunks or small ones.
We use this information in SSL to adjust the max record dynamically.
This results in small chunks respecting tune.ssl.maxrecord at the
beginning of a transfer or for small transfers, with an automatic
switch to full records if the exchanges last long. This allows the
receiver to parse HTML contents on the fly without having to retrieve
16kB of data, which is even more important with small initcwnd since
the receiver does not need to wait for round trips to start fetching
new objects. However, sending large files still produces large chunks.
For example, with tune.ssl.maxrecord = 2859, we see 5 write(2885)
sent in two segments each and 6 write(16421).
This idea was first proposed on the haproxy mailing list by Ilya Grigorik.
This prevents us from passing other useful info and requires the
upper levels to know these flags. Let's use a new flags category
instead : CO_SFL_*. For now, only MSG_MORE has been remapped.
A new tcp-check rule type: connect.
It allows HAProxy to test applications which stand on multiple ports or
multiple applications load-balanced through the same backend.
Since we support HTTP keep-alive, there is no more reason for staying
in tunnel mode by default. It is confusing for new users and creates
more issues than it solves. Option "http-tunnel" is available to force
to use it if really desired.
Switching to KA by default has implied to change the value of some
option flags and some transaction flags so that value zero (default)
matches keep-alive. That explains why more code has been changed than
expected. Tests have been run on the 25 combinations of frontend and
backend options, plus a few with option http-pretend-keepalive, and
no anomaly was found.
The relation between frontend and backends remains the same. Options
have been updated to take precedence over http-keep-alive which is now
implicit.
All references in the doc to haproxy not supporting keep-alive have
been fixed, and the doc for config options has been updated.
At the very beginning of haproxy, there was "option httpclose" to make
haproxy add a "Connection: close" header in both directions to invite
both sides to agree on closing the connection. It did not work with some
rare products, so "option forceclose" was added to do the same and actively
close the connection. Then client-side keep-alive was supported, so option
http-server-close was introduced. Now we have keep-alive with a fourth
option, not to mention the implicit tunnel mode.
The connection configuration has become a total mess because all the
options above may be combined together, despite almost everyone thinking
they cancel each other, as judging from the common problem reports on the
mailing list. Unfortunately, re-reading the doc shows that it's not clear
at all that options may be combined, and the opposite seems more obvious
since they're compared. The most common issue is options being set in the
defaults section that are not negated in other sections, but are just
combined when the user expects them to be overloaded. The migration to
keep-alive by default will only make things worse.
So let's start to address the first problem. A transaction can only work in
5 modes today :
- tunnel : haproxy doesn't bother with what follows the first req/resp
- passive close : option http-close
- forced close : option forceclose
- server close : option http-server-close with keep-alive on the client side
- keep-alive : option http-keep-alive, end to end
All 16 combination for each section fall into one of these cases. Same for
the 256 combinations resulting from frontend+backend different modes.
With this patch, we're doing something slightly different, which will not
change anything for users with valid configs, and will only change the
behaviour for users with unsafe configs. The principle is that these options
may not combined anymore, and that the latest one always overrides all the
other ones, including those inherited from the defaults section. The "no
option xxx" statement is still supported to cancel one option and fall back
to the default one. It is mainly needed to ignore defaults sections (eg:
force the tunnel mode). The frontend+backend combinations have not changed.
So for examplen the following configuration used to put the connection
into forceclose :
defaults http
mode http
option httpclose
frontend foo.
option http-server-close
=> http-server-close+httpclose = forceclose before this patch! Now
the frontend's config replaces the defaults config and results in
the more expected http-server-close.
All 25 combinations of the 5 modes in (frontend,backend) have been
successfully tested.
In order to prepare for upcoming changes, a new "option http-tunnel" was
added. It currently only voids all other options, and has the lowest
precedence when mixed with another option in another frontend/backend.
If no CA file specified on a server line, the config parser will show an error.
Adds an cmdline option '-dV' to re-set verify 'none' as global default on
servers side (previous behavior).
Also adds 'ssl-server-verify' global statement to set global default to
'none' or 'required'.
WARNING: this changes the default verify mode from "none" to "required" on
the server side, and it *will* break insecure setups.
Till now, we had one flag per stick counter to indicate if it was
tracked in a backend or in a frontend. We just had to add another
flag per stick-counter to indicate if it relies on contents or just
connection. These flags are quite painful to maintain and tend to
easily conflict with other flags if their number is changed.
The correct solution consists in moving the flags to the stkctr struct
itself, but currently this struct is made of 2 pointers, so adding a
new entry there to store only two bits will cause at least 16 more bytes
to be eaten per counter due to alignment issues, and we definitely don't
want to waste tens to hundreds of bytes per session just for things that
most users don't use.
Since we only need to store two bits per counter, an intermediate
solution consists in replacing the entry pointer with a composite
value made of the original entry pointer and the two flags in the
2 unused lower bits. If later a need for other flags arises, we'll
have to store them in the struct.
A few inline functions have been added to abstract the retrieval
and assignment of the pointers and flags, resulting in very few
changes. That way there is no more dependence on the number of
stick-counters and their position in the session flags.
Very often we want to associate one or two flags to a pointer, to
put a type on it or whatever. This patch provides this in standard.h
in the form of a few inline functions which combine a void * pointer
with an int and return an unsigned long called a composite address.
The functions allow to individuall set, retrieve both the pointer and
the flags. This is very similar to what is used in ebtree in fact.
One year ago, commit 5d5b5d8 ("MEDIUM: proto_tcp: add support for tracking
L7 information") brought support for tracking L7 information in tcp-request
content rules. Two years earlier, commit 0a4838c ("[MEDIUM] session-counters:
correctly unbind the counters tracked by the backend") used to flush the
backend counters after processing a request.
While that earliest patch was correct at the time, it became wrong after
the second patch was merged. The code does what it says, but the concept
is flawed. "TCP request content" rules are evaluated for each HTTP request
over a single connection. So if such a rule in the frontend decides to
track any L7 information or to track L4 information when an L7 condition
matches, then it is applied to all requests over the same connection even
if they don't match. This means that a rule such as :
tcp-request content track-sc0 src if { path /index.html }
will count one request for index.html, and another one for each of the
objects present on this page that are fetched over the same connection
which sent the initial matching request.
Worse, it is possible to make the code do stupid things by using multiple
counters:
tcp-request content track-sc0 src if { path /foo }
tcp-request content track-sc1 src if { path /bar }
Just sending two requests first, one with /foo, one with /bar, shows
twice the number of requests for all subsequent requests. Just because
both of them persist after the end of the request.
So the decision to flush backend-tracked counters was not the correct
one. In practice, what is important is to flush countent-based rules
since they are the ones evaluated for each request.
Doing so requires new flags in the session however, to keep track of
which stick-counter was tracked by what ruleset. A later change might
make this easier to maintain over time.
This bug is 1.5-specific, no backport to stable is needed.
show pools
Dump the status of internal memory pools. This is useful to track memory
usage when suspecting a memory leak for example. It does exactly the same
as the SIGQUIT when running in foreground except that it does not flush
the pools.
Just like the previous commit, we sometimes want to limit the rate of
incoming SSL connections. While it can be done for a frontend, it was
not possible for a whole process, which makes sense when multiple
processes are running on a system to server multiple customers.
The new global "maxsslrate" setting is usable to fix a limit on the
session rate going to the SSL frontends. The limits applies before
the SSL handshake and not after, so that it saves the SSL stack from
expensive key computations that would finally be aborted before being
accounted for.
The same setting may be changed at run time on the CLI using
"set rate-limit ssl-session global".
It's sometimes useful to be able to limit the connection rate on a machine
running many haproxy instances (eg: per customer) but it removes the ability
for that machine to defend itself against a DoS. Thus, better also provide a
limit on the session rate, which does not include the connections rejected by
"tcp-request connection" rules. This permits to have much higher limits on
the connection rate without having to raise the session rate limit to insane
values.
The limit can be changed on the CLI using "set rate-limit sessions global",
or in the global section using "maxsessrate".
In addition to previous outputs, we also emit the cumulated number of
connections, the cumulated number of requests, the maximum allowed
SSL connection concurrency, the current number of SSL connections and
the cumulated number of SSL connections. This will help troubleshoot
systems which experience memory shortage due to SSL.
This function is used to compute the new polling state based on
the previous state. All pollers have to do this in their update
loop, so better centralize the logic for it.
Currently, each poll loop handles the polled events the same way,
resulting in a lot of duplicated, complex code. Additionally, epoll
was the only one to handle newly created FDs immediately.
So instead, let's move that code to fd.c in a new function dedicated
to this task : fd_process_polled_events(). All pollers now use this
function.
This is the reimplementation of the "done" action : when we experience
a short read, we're almost certain that we've exhausted the system's
buffers and that we'll meet an EAGAIN if we attempt to read again. If
the FD is not yet polled, the stream interface already takes care of
stopping the speculative read. When the FD is already being polled, we
have two options :
- either we're running from a level-triggered poller, in which case
we'd rather report that we've reached the end so that we don't
speculate over the poller and let it report next time data are
available ;
- or we're running from an edge-triggered poller in which case we
have no choice and have to see the EAGAIN to re-enable events.
At the moment we don't have any edge-triggered poller, so it's desirable
to avoid speculative I/O that we know will fail.
Note that this must not be ported to SSL since SSL hides the real
readiness of the file descriptor.
Thanks to this change, we observe no EAGAIN anymore during keep-alive
transfers, and failed recvfrom() are reduced by half in http-server-close
mode (the client-facing side is always being polled and the second recv
can be avoided). Doing so results in about 5% performance increase in
keep-alive mode. Similarly, we used to have up to about 1.6% of EAGAIN
on accept() (1/maxaccept), and these have completely disappeared under
high loads.
It's easier and safer to rely on conn_xprt_ready() everywhere than to
check the flag itself. It will also simplify adding extra checks later
if needed. Some useless controls for !xprt have been removed, as the
XPRT_READY flag itself guarantees xprt is set.
It's easier and safer to rely on conn_ctrl_ready() everywhere than to
check the flag itself. It will also simplify adding extra checks later
if needed. Some useless controls for !ctrl have been removed, as the
CTRL_READY flag itself guarantees ctrl is set.
We simply remove these functions and replace their calls with the
appropriate ones :
- if we're in the data phase, we can simply report wait on the FD
- if we're in the socket phase, we may also have to signal the
desire to read/write on the socket because it might not be
active yet.
These flags were used to report the readiness of the file descriptor.
Now this readiness is directly checked at the file descriptor itself.
This removes the need for constantly synchronizing updates between the
file descriptor and the connection and ensures that all layers share
the same level of information.
For now, the readiness is updated in conn_{sock,data}_poll_* by directly
touching the file descriptor. This must move to the lower layers instead
so that these functions can disappear as well. In this state, the change
works but is incomplete. It's sensible enough to avoid making it more
complex.
Now the sock/data updates become much simpler because they just have to
enable/disable access to a file descriptor and not to care anymore about
its readiness.
This commit heavily changes the polling system in order to definitely
fix the frequent breakage of SSL which needs to remember the last
EAGAIN before deciding whether to poll or not. Now we have a state per
direction for each FD, as opposed to a previous and current state
previously. An FD can have up to 8 different states for each direction,
each of which being the result of a 3-bit combination. These 3 bits
indicate a wish to access the FD, the readiness of the FD and the
subscription of the FD to the polling system.
This means that it will now be possible to remember the state of a
file descriptor across disable/enable sequences that generally happen
during forwarding, where enabling reading on a previously disabled FD
would result in forgetting the EAGAIN flag it met last time.
Several new state manipulation functions have been introduced or
adapted :
- fd_want_{recv,send} : enable receiving/sending on the FD regardless
of its state (sets the ACTIVE flag) ;
- fd_stop_{recv,send} : stop receiving/sending on the FD regardless
of its state (clears the ACTIVE flag) ;
- fd_cant_{recv,send} : report a failure to receive/send on the FD
corresponding to EAGAIN (clears the READY flag) ;
- fd_may_{recv,send} : report the ability to receive/send on the FD
as reported by poll() (sets the READY flag) ;
Some functions are used to report the current FD status :
- fd_{recv,send}_active
- fd_{recv,send}_ready
- fd_{recv,send}_polled
Some functions were removed :
- fd_ev_clr(), fd_ev_set(), fd_ev_rem(), fd_ev_wai()
The POLLHUP/POLLERR flags are now reported as ready so that the I/O layers
knows it can try to access the file descriptor to get this information.
In order to simplify the conditions to add/remove cache entries, a new
function fd_alloc_or_release_cache_entry() was created to be used from
pollers while scanning for updates.
The following pollers have been updated :
ev_select() : done, built, tested on Linux 3.10
ev_poll() : done, built, tested on Linux 3.10
ev_epoll() : done, built, tested on Linux 3.10 & 3.13
ev_kqueue() : done, built, tested on OpenBSD 5.2
We're completely changing the way FDs will be polled. There will be no
more speculative I/O since we'll know the exact FD state, so these will
only be cached events.
First, let's fix a few field names which become confusing. "spec_e" was
used to store a speculative I/O event state. Now we'll store the whole
R/W states for the FD there. "spec_p" was used to store a speculative
I/O cache position. Now let's clearly call it "cache".
We're completely changing the way FDs will be polled. First, let's fix
a few field names which become confusing. "spec_e" was used to store a
speculative I/O event state. Now we'll store the whole R/W states for
the FD there.
Patrick Hemmer reported that using unique_id_format and logs did not
report the same unique ID counter since commit 9f09521 ("BUG/MEDIUM:
unique_id: HTTP request counter must be unique!"). This is because
the increment was done while producing the log message, so it was
performed twice.
A better solution consists in fetching a new value once per request
and saving it in the request or session context for all of this
request's life.
It happens that sessions already have a unique ID field which is used
for debugging and reporting errors, and which differs from the one
sent in logs and unique_id header.
So let's change this to reuse this field to have coherent IDs everywhere.
As of now, a session gets a new unique ID once it is instanciated. This
means that TCP sessions will also benefit from a unique ID that can be
logged. And this ID is renewed for each extra HTTP request received on
an existing session. Thus, all TCP sessions and HTTP requests will have
distinct IDs that will be stable along all their life, and coherent
between all places where they're used (logs, unique_id header,
"show sess", "show errors").
This feature is 1.5-specific, no backport to 1.4 is needed.
It is quite often that an connection error only reports "socket error" with
no more information. This is especially problematic with health checks where
many causes are possible, including resource exhaustion which do not lead to
a valid errno code. So let's add explicit codes to cover these cases.
Till now there was no way to know from a connection if a previous
call to drain() had done any change. This function is used to drain
incoming data and to update the connection's flags at the same time.
It also correctly sets the polling flags on the connection if the
drain function indicates inability to receive. This function will
be used preferably over ctrl->drain() when a connection is used.
Recent commit 4448925 ("BUILD/MINOR: listener: remove a glibc warning on accept4()")
broke accept4() on some systems because the glibc's version may now conflict with
the local one.
This reverts commit 1208266356.
It randomly breaks SSL. What happens is that if the SSL response is
read at once by the SSL stack and is partially delivered to the buffer,
then there's no way to read the next parts because we wait for some
polling first.
So we'll fix this after the polling rework.
This function is called twice per request, and does almost always nothing.
Better use an inline version to avoid entering it when we can.
About 0.5% additional performance was gained this way.
si_connect() used to only return SI_ST_CON. But it already detect the
connection reuse and is the function which avoids calling connect().
So it already knows the connection is valid and reuse. Thus we make it
return SI_ST_EST when a connection is reused. This means that
connect_server() can return this state and sess_update_stream_int()
as well.
Thanks to this change, we don't need to leave process_session() in
SI_ST_CON state to immediately enter it again to switch to SI_ST_EST.
Implementing this removes one call to process_session() per request
in keep-alive mode. We're now at 2 calls per request, which is the
minimum (one for the request and another one for the response). The
number of calls to http_wait_for_response() has also dropped from 2
to one.
Tests indicate a performance gain of about 2.6% in request rate in
keep-alive mode. There should be no gain in http-server-close() since
we don't use this faster path.
Since commit 6b66f3e ([MAJOR] implement autonomous inter-socket forwarding)
introduced in 1.3.16-rc1, we've been relying on a stupid mechanism to wake
up the task after a write, which was an exact copy-paste of the reader side.
The principle was that if we empty a buffer and there's no forwarding
scheduled or if the *producer* is not in a connected state, then we wake
the task up.
That does not make any sense. It happens to wake up too late sometimes (eg,
when the request analyser waits for some room in the buffer to start to
work), and leads to unneeded wakeups in client-side keep-alive, because
the task is woken up when the response is sent, while the analysers are
simply waiting for a new request.
In order to fix this, we introduce a new channel flag : CF_WAKE_WRITE. It
is designed so that an analyser can explicitly request being notified when
some data were written. It is used only when the HTTP request or response
analysers need to wait for more room in the buffers. It is automatically
cleared upon wake up.
The flag is also automatically set by the functions which try to write into
a buffer from an applet when they fail (bi_putblk() etc...).
That allows us to remove the stupid condition above and avoid some wakeups.
In http-server-close and in http-keep-alive modes, this reduces from 4 to 3
the average number of wakeups per request, and increases the overall
performance by about 1.5%.
This reverts commit f3221f99ac.
Igor reported some very strange breakage of his stats page which is
clearly caused by the chunking, though I don't see at first glance
what could be wrong. Better revert it for now.
In theory the principle is simple as we just need to send HTTP chunks
if the client is 1.1 compatible. In practice it's harder because we
have to append a CR LF after each block of data and we're never sure
to have the room for this. In order not to have to deal with this, we
instead send the CR LF prior to each chunk size. The only issue is for
the first chunk and for this reason we avoid to send the empty header
line when using chunked encoding.
This value is stored as unsigned in chn->to_forward. Having it defined
as signed makes it impossible to pass channel_forward() a previously
saved value because the argument will be zero-extended during the
conversion to long long, while the test will be performed using sign
extension. There is no impact on existing code right now.
If a file descriptor is being polled, and it stopped (eg: buffer full
or end of response), then re-enabled, currently what happens is that
the polling is disabled, then the fd is enabled in speculative mode,
an I/O attempt is made, it loses (otherwise the FD would surely not
have been polled), and the polled is enabled again.
This is too bad, especially with HTTP keep-alive on the server side
where all operations are performed at once before going back to the
poll loop.
Now we improve the behaviour by ensuring that if an fd is still being
polled, when it's enabled after having been disabled, we re-enable the
polling. Doing so saves a number of syscalls and useless wakeups, and
results in a significant performance gain on HTTP keep-alive. A 11%
increase has been observed on the HTTP request rate in keep-alive
thanks to this.
It could be considered as a bug fix, but there was no harm with the
current behaviour, except extra syscalls.
In HTTP keep-alive mode, if we receive a 401, we still have a chance
of being able to send the visitor again to the same server over the
same connection. This is required by some broken protocols such as
NTLM, and anyway whenever there is an opportunity for sending the
challenge to the proper place, it's better to do it (at least it
helps with debugging).
Idle connections are not monitored right now. So if a server closes after
a response without advertising it, it won't be detected until a next
request wants to use the connection. This is a bit problematic because
it unnecessarily maintains file descriptors and sockets in an idle
state.
This patch implements a very simple idle connection manager for the stream
interface. It presents itself as an I/O callback. The HTTP engine enables
it when it recycles a connection. If a close or an error is detected on the
underlying socket, it tries to drain as much data as possible from the socket,
detect the close and responds with a close as well, then detaches from the
stream interface.
The throttling of low weight servers (<16) could mistakenly be reported
as > 100% due to a rounding that was performed before a multiply by 100
instead of after. This was introduced in 1.5-dev20 when fixing a previous
reporting issue by commit d32c399 (MINOR: stats: report correct throttling
percentage for servers in slowstart).
It should be backported if the patch above is backported.
When the load balancing algorithm in use is not deterministic, and a previous
request was sent to a server to which haproxy still holds a connection, it is
sometimes desirable that subsequent requests on a same session go to the same
server as much as possible. Note that this is different from persistence, as
we only indicate a preference which haproxy tries to apply without any form
of warranty. The real use is for keep-alive connections sent to servers. When
this option is used, haproxy will try to reuse the same connection that is
attached to the server instead of rebalancing to another server, causing a
close of the connection. This can make sense for static file servers. It does
not make much sense to use this in combination with hashing algorithms.
This is the best place to reuse a connection. We centralize all
connection requests and we're at the best place to know exactly
what the current state of the underlying connection is. If the
connection is reused, we just enable polling for send() in order
to be able to emit the request.
When allocating a new connection, only the caller knows whether it's
acceptable to reuse the previous one or not. Let's pass this information
to si_alloc_conn() which will do the cleanup if the connection is not
acceptable.
Right now we see many places doing their own setsockopt(SO_LINGER).
Better only do it just before the close() in fd_delete(). For this
we add a new flag on the file descriptor, indicating if it's safe or
not to linger. If not (eg: after a connect()), then the setsockopt()
call is automatically performed before a close().
The flag automatically turns to safe when receiving a read0.
conn_xprt_ready() reports if the transport layer is ready.
conn_ctrl_ready() reports if the control layer is ready.
The stream interface uses si_conn_ready() to report that the
underlying connection is ready. This will be used for connection
reuse in keep-alive mode.
Health checks can now be paused. This is the status they get when the
server is put into maintenance mode, which is more logical than relying
on the server's state at some places. It will be needed to allow agent
checks to run when health checks are disabled (currently not possible).
Having the check state partially stored in the server doesn't help.
Some functions such as srv_getinter() rely on the server being checked
to decide what check frequency to use, instead of relying on the check
being configured. So let's get rid of SRV_CHECKED and SRV_AGENT_CHECKED
and only use the check's states instead.
At the moment, health checks and agent checks are tied : no agent
check is emitted if no health check is enabled. Other parameters
are considered in the condition for letting checks run. It will
help us selectively enable checks (agent and regular checks) to be
know whether they're enabled/disabled and configured or not. Now
we can already emit an error when trying to enable an unconfigured
agent.
The flag CHK_STATE_RUNNING is misleading as one may believe it means
the state is enabled (just like SRV_RUNNING). Let's rename these two
flags CHK_ST_INPROGRESS and CHK_ST_DISABLED.
We used to have up to 4 sets of flags which were almost all exclusive
to report a check result. And the names were inherited from the old
server states, adding to the confusion. Let's replace that with an
enum handling only the possible combinations :
SRV_CHK_UNKNOWN => CHK_RES_UNKNOWN
SRV_CHK_FAILED => CHK_RES_FAILED
SRV_CHK_PASSED => CHK_RES_PASSED
SRV_CHK_PASSED | SRV_CHK_DISABLE => CHK_RES_CONDPASS
After the move of checks from servers to autonomous checks, we need a
massive cleanup and reordering as it's becoming increasingly difficult
to find the definitions of types and enums.
Nothing was changed, blocks were just moved.
Server tracking uses the same "tracknext" list for servers tracking
another one and for the servers being tracked. This caused an issue
which was fixed by commit f39c71c ([CRITICAL] fix server state tracking:
it was O(n!) instead of O(n)), consisting in ensuring that a server is
being checked before walking down the list, so that we don't propagate
the up/down information via servers being part of the track chain.
But the root cause is the fact that all servers share the same list.
The correct solution consists in having a list head for the tracked
servers and a list of next tracking servers. This simplifies the
propagation logic, especially for the case where status changes might
be passed to individual servers via the CLI.
It's becoming increasingly difficult to ignore unwanted function returns in
debug code with gcc. Now even when you try to work around it, it suggests a
way to write your code differently. For example :
src/frontend.c:187:65: warning: if statement has empty body [-Wempty-body]
if (write(1, trash.str, trash.len) < 0) /* shut gcc warning */;
^
src/frontend.c:187:65: note: put the semicolon on a separate line to silence this warning
1 warning generated.
This is totally unacceptable, this code already had to be written this way
to shut it up in earlier versions. And now it comments the form ? What's the
purpose of the C language if you can't write anymore the code that does what
you want ?
Emeric proposed to just keep a global variable to drain such useless results
so that gcc stops complaining all the time it believes people who write code
are monkeys. The solution is acceptable because the useless assignment is done
only in debug code so it will not impact performance. This patch implements
this, until gcc becomes even "smarter" to detect that we tried to cheat.
Some systems use different types for tv_sec/tv_usec, some are
signed others not. From time to time new warnings are reported
about implicit casts being done.
This patch ensures that TV_ETERNITY is cast to the appropriate
type in assignments and conversions.
Doing so ensures that we're consistent between all the functions in the whole
chain. This is important so that we can extract the argument parsing from this
function.
This patch adds map manipulation commands to the socket interface.
add map <map> <key> <value>
Add the value <value> in the map <map>, at the entry corresponding to
the key <key>. This command does not verify if the entry already
exists.
clear map <map>
Remove entries from the map <map>
del map <map> <key>
Delete all the map entries corresponding to the <key> value in the map
<map>.
set map <map> <key> <value>
Modify the value corresponding to each key <key> in a map <map>. The
new value is <value>.
show map [<map>]
Dump info about map converters. Without argument, the list of all
available maps are returned. If a <map> is specified, is content is
dumped.
With this patch, patterns can be compiled for two modes :
- match
- lookup
The match mode is used for example in ACLs or maps. The lookup mode
is used to lookup a key for pattern maintenance. For example, looking
up a network is different from looking up one address belonging to
this network.
A special case is made for regex. In lookup mode they return the input
regex string and do not compile the regex.
Now, the pat_parse_*() functions parses the incoming data. The input
"pattern" struct can be preallocated. If the parser needs to add some
buffers, it allocates memory.
The function pattern_register() runs the call to the parser, process
the key indexation and associate the "sample_storage" used by maps.
This patch remove the compatibility check from the input type and the
match method. Now, it checks if a casts from the input type to output
type exists and the pattern_exec_match() function apply casts before
each pattern matching.
This is used later for increasing the compability with incoming
sample types. When multiple compatible types are supported, one
is arbitrarily used (eg: UINT).
Baptiste Assmann reported some confusing printf() output of the server
port since it's declared signed. Better turn it to unsigned.
There's no need to backport this, it's only used in 16-bit places.
SSL and keep-alive will need to be able to fail on allocation errors,
and the stream interface did not allow to report such a cause. The flag
will then be "RC" as already documented.
Just by reordering the struct task, we could shrink it by 8 bytes from
120 to 112 bytes. A careful reordering allowed each part to be located
closer to the hot parts it's used with, resulting in another performance
increase of about 0.5%.
This reduces its size which is not reused by anything else. However it
will significantly improve the debugger's output since we'll now get
real state values.
The default case had to be enabled in the parsers because gcc tries
to optimize the switch/case and noticed some values were missing from
the enums and emitted a warning.
Here again we had some oversized and misaligned entries. The method
and the status don't need 4 bytes each, and there was a hole after
the status that does not exist anymore. That's 8 additional bytes
saved from http_txn and as much for the session.
Also some fields were slightly moved to present better memory access
patterns resulting in a steady 0.5% performance increase.
The current and previous states are now packed enums instead of ints. This will
also help in gdb. The flags have been turned to 16-bit instead of 32 since only
10 are used. This resulted in saving 8 bytes per streamm interface, or 16 per
session.
Turn the proxy state to a packed enum (1 char), same for the proxy mode,
and store the capabitilies as a char. These 3 ints can now fill the hole
after obj_type and save 8 bytes in the proxy struct. Moving the maxconn
value just after, which is frequently accessed and was in a block of 3
ints saved another 8 bytes.
Pack the listener state to 1 char, store it as an enum instead of an
int (more gdb-friendly), and move a few fields around to fill holes.
The <nice> field can only be -1024..1024 so it was stored as a signed
short and completes well with obj_type and li_state.
Doing this has reduced the struct listener from 376 to 360 bytes (4.2%).
By moving the error code to 8 bits the send_proxy_ofs to 16 bits, and
moving them just after the obj_type, we can save 8 bytes in the struct
connection, down from 328 to 320.
Taking 32-bit in each struct just to store an obj_type is a waste
considering the very small amount of possible values. Let's force
it to be as small as possible (1 char) and we'll be able to move
some structs around to save some space.
From now on, a call to stream_int_register_handler() causes a call
to si_alloc_appctx() and returns an initialized appctx for the
current stream interface. If one was previously allocated, it is
released. If the stream interface was attached to a connection, it
is released as well.
The appctx are allocated from the same pools as the connections, because
they're substantially smaller in size, and we can't have both a connection
and an appctx on an interface at any moment.
In case of memory shortage, the call may return NULL, which is already
handled by all consumers of stream_int_register_handler().
The field appctx was removed from the stream interface since we only
rely on the endpoint now. On 32-bit, the stream_interface size went down
from 108 to 44 bytes. On 64-bit, it went down from 144 to 64 bytes. This
represents a memory saving of 160 bytes per session.
It seems that a later improvement could be to move the call to
stream_int_register_handler() to session.c for most cases.
The task returned by stream_int_register_handler() is never used, however we
always need to access the appctx afterwards. So make it return the appctx
instead. We already plan for it to fail, which is the reason for the addition
of a few tests and the possibility for the HTTP analyser to return a status
code 500.
We're about to remove si->appctx, so first let's replace all occurrences
of its usage with a dynamic extract from si->end. A lot of code was changed
by search-n-replace, but the behaviour was intentionally not altered.
The code surrounding calls to stream_int_register_handler() was slightly
changed since we can only use si->end *after* the registration.
We used to have two very similar functions for sending a PROXY protocol
line header. The reason is that the default one relies on the stream
interface to retrieve the other end's address, while the "local" one
performs a local address lookup and sends that instead (used by health
checks).
Now that the send_proxy_ofs is stored in the connection and not the
stream interface, we can make the local_send_proxy rely on it and
support partial sends. This also simplifies the code by removing the
local_send_proxy function, making health checks use send_proxy_ofs,
resulting in the removal of the CO_FL_LOCAL_SPROXY flag, and the
associated test in the connection handler. The other flag,
CO_FL_SI_SEND_PROXY was renamed without the "SI" part so that it
is clear that it is not dedicated anymore to a usage with a stream
interface.
Till now the send_proxy_ofs field remained in the stream interface,
but since the dynamic allocation of the connection, it makes a lot
of sense to move that into the connection instead of the stream
interface, since it will not be statically allocated for each
session.
Also, it turns out that moving it to the connection fils an alignment
hole on 64 bit architectures so it does not consume more memory, and
removing it from the stream interface was an opportunity to correctly
reorder fields and reduce the stream interface's size from 160 to 144
bytes (-10%). This is 32 bytes saved per session.
The outgoing connection is now allocated dynamically upon the first attempt
to touch the connection's source or destination address. If this allocation
fails, we fail on SN_ERR_RESOURCE.
As we didn't use si->conn anymore, it was removed. The endpoints are released
upon session_free(), on the error path, and upon a new transaction. That way
we are able to carry the existing server's address across retries.
The stream interfaces are not initialized anymore before session_complete(),
so we could even think about allocating them dynamically as well, though
that would not provide much savings.
The session initialization now makes use of conn_new()/conn_free(). This
slightly simplifies the code and makes it more logical. The connection
initialization code is now shorter by about 120 bytes because it's done
at once, allowing the compiler to remove all redundant initializations.
The si_attach_applet() function now takes care of first detaching the
existing endpoint, and it is called from stream_int_register_handler(),
so we can safely remove the calls to si_release_endpoint() in the
application code around this call.
A call to si_detach() was made upon stream_int_unregister_handler() to
ensure we always free the allocated connection if one was allocated in
parallel to setting an applet (eg: detect HTTP proxy while proceeding
with stats maybe).
si_prepare_conn() is not appropriate in our case as it both initializes and
attaches the connection to the stream interface. Due to the asymmetry between
accept() and connect(), it causes some fields such as the control and transport
layers to be reinitialized.
Now that we can separately initialize these fields using conn_prepare(), let's
break this function to only attach the connection to the stream interface.
Also, by analogy, si_prepare_none() was renamed si_detach(), and
si_prepare_applet() was renamed si_attach_applet().
We don't want to assign the control nor transport layers anymore
at the same time as the data layer, because it prevents one from
keeping existing settings when reattaching a connection to an
existing stream interface.
Let's have conn_attach() replace conn_assign() for this purpose.
Thus, conn_prepare() + conn_attach() do exactly the same as the
previous conn_assign().
Now that we can assign conn->xprt regardless of the initialization state,
we can reintroduce conn_prepare() to set only the protocol, the transport
layer and initialize the transport layer's state.
The first function is used to (re)initialize a stream interface and
the second to force it into a known state. These are intended for
cleaning up the stream interface initialization code in session.c
and peers.c and avoiding future issues with missing initializations.
Currently the control and transport layers of a connection are supposed
to be initialized when their respective pointers are not NULL. This will
not work anymore when we plan to reuse connections, because there is an
asymmetry between the accept() side and the connect() side :
- on accept() side, the fd is set first, then the ctrl layer then the
transport layer ; upon error, they must be undone in the reverse order,
then the FD must be closed. The FD must not be deleted if the control
layer was not yet initialized ;
- on the connect() side, the fd is set last and there is no reliable way
to know if it has been initialized or not. In practice it's initialized
to -1 first but this is hackish and supposes that local FDs only will
be used forever. Also, there are even less solutions for keeping trace
of the transport layer's state.
Also it is possible to support delayed close() when something (eg: logs)
tracks some information requiring the transport and/or control layers,
making it even more difficult to clean them.
So the proposed solution is to add two flags to the connection :
- CO_FL_CTRL_READY is set when the control layer is initialized (fd_insert)
and cleared after it's released (fd_delete).
- CO_FL_XPRT_READY is set when the control layer is initialized (xprt->init)
and cleared after it's released (xprt->close).
The functions have been adapted to rely on this and not on the pointers
anymore. conn_xprt_close() was unused and dangerous : it did not close
the control layer (eg: the socket itself) but still marks the transport
layer as closed, preventing any future call to conn_full_close() from
finishing the job.
The problem comes from conn_full_close() in fact. It needs to close the
xprt and ctrl layers independantly. After that we're still having an issue :
we don't know based on ->ctrl alone whether the fd was registered or not.
For this we use the two new flags CO_FL_XPRT_READY and CO_FL_CTRL_READY. We
now rely on this and not on conn->xprt nor conn->ctrl anymore to decide what
remains to be done on the connection.
In order not to miss some flag assignments, we introduce conn_ctrl_init()
to initialize the control layer, register the fd using fd_insert() and set
the flag, and conn_ctrl_close() which unregisters the fd and removes the
flag, but only if the transport layer was closed.
Similarly, at the transport layer, conn_xprt_init() calls ->init and sets
the flag, while conn_xprt_close() checks the flag, calls ->close and clears
the flag, regardless xprt_ctx or xprt_st. This also ensures that the ->init
and the ->close functions are called only once each and in the correct order.
Note that conn_xprt_close() does nothing if the transport layer is still
tracked.
conn_full_close() now simply calls conn_xprt_close() then conn_full_close()
in turn, which do nothing if CO_FL_XPRT_TRACKED is set.
In order to handle the error path, we also provide conn_force_close() which
ignores CO_FL_XPRT_TRACKED and closes the transport and the control layers
in turns. All relevant instances of fd_delete() have been replaced with
conn_force_close(). Now we always know what state the connection is in and
we can expect to split its initialization.
conn_new() will be a more convenient way of allocating and initializing
a connection. It calls pool_alloc2() and conn_init() upon success.
conn_free() is just a pool_free2() but is provided for symmetry with
conn_new().
Everywhere conn_prepare() is used, the call to conn_init() has already
been done. We can now safely replace all instances of conn_prepare()
with conn_assign() which does not reset the transport layer, and remove
conn_prepare().
This function will ease the initialization of new connections as well
as their reuse. It initializes the obj_type and a few fields so that
the connection is fresh again. It leaves the addresses and target
untouched so it is suitable for use across connection retries.
In order to reduce the dependency over stream-interfaces, we now
attach the incoming connection to the embryonic session's target
instead of the stream-interface's connection. This means we won't
need to initialize stream interfaces anymore after we implement
dynamic connection allocation. The session's target is reset to
NULL after the session has been converted to a complete session.
The connection will only remain there as a pre-allocated entity whose
goal is to be placed in ->end when establishing an outgoing connection.
All connection initialization can be made on this connection, but all
information retrieved should be applied to the end point only.
This change is huge because there were many users of si->conn. Now the
only users are those who initialize the new connection. The difficulty
appears in a few places such as backend.c, proto_http.c, peers.c where
si->conn is used to hold the connection's target address before assigning
the connection to the stream interface. This is why we have to keep
si->conn for now. A future improvement might consist in dynamically
allocating the connection when it is needed.
This function makes no sense anymore and will cause trouble to convert
the remains of connection/applet to end points. Let's replace it now
with its contents.
The long-term goal is to have a context for applets as an alternative
to the connection and not as a complement. At the moment, the context
is still stored into the stream interface, and we only put a pointer
to the applet's context in si->end, initialize the context with object
type OBJ_TYPE_APPCTX, and this allows us not to allocate an entry when
deciding to switch to an applet.
A special care is taken to never dereference si->conn anymore when
dealing with an applet. That's why it's important that si->end is
always set to the proper type :
si->end == NULL => not connected to anything
*si->end == OBJ_TYPE_APPCTX => connected to an applet
*si->end == OBJ_TYPE_CONN => real connection (server, proxy, ...)
The session management code used to check the applet from the connection's
target. Now it uses the stream interface's end point and does not touch the
connection at all. Similarly, we stop checking the connection's addresses
and file descriptors when reporting the applet's status in the stats dump.
Since last commit, we now have a pointer to the applet in the
applet context. So we don't need the si->release function pointer
anymore, it can be extracted from applet->applet.release. At many
places, the ->release function was still tested for real connections
while it is only limited to applets, so most of them were simply
removed. For the remaining valid uses, a new inline function
si_applet_release() was added to simplify the check and the call.
In preparation for a later move of all the applet context outside of the
stream interface, we'll need to have access to the applet itself from the
context. Let's have a pointer to it inside the context.
si_prepare_embedded() was used both to attach an applet and to detach
anything from a stream interface. Split it into si_prepare_none() to
detach and si_prepare_applet() to attach an applet.
si->conn->target is now assigned from within these two functions instead
of their respective callers.
Since this is the applet context, call it ->appctx to avoid the confusion
with the pointer to the applet. Many places were changed but it's only a
renaming.
The object type was added to "struct appctx". The purpose will be
to identify an appctx when the applet context is detached from the
stream interface. For now, it's still attached, so this patch only
adds the new type and does not replace its use.
In preparation of making the applet context dynamically allocatable,
we create a "struct appctx". Nothing else was changed, it's the same
struct as the one which was in the stream interface.
A long time ago when peers were introduced, there was no applet nor
applet context. Applet contexts were introduced but the peers still
did not make use of them and the "ptr" pointer remains present in
every stream interface in addition to the other contexts.
Simply move this pointer to its own location in the context.
Note that this pointer is still a void* because its type and contents
varies depending on the peers session state. Probably that this could
be cleaned up in the future given that all other contexts already store
much more than a single pointer.
Most of the times, the caller of objt_<type>(ptr) will know that <ptr>
is valid and of the correct type (eg: in an "if" condition). Let's provide
an unsafe variant that does not perform the check again for these usages.
The new functions are called "__objt_<type>".
This is to be more consistent with the other functions. The only
reason why these functions used to return a value was to let the
caller adjust polling by itself, but now their only callers were
the si_shutr()/si_shutw() inline functions. Now these functions
do not depend anymore on the connection.
These connection variant of these functions now call
conn_data_stop_recv()/conn_data_stop_send() before returning order
not to require a return code anymore. The applet version does not
need this at all.
These functions induce a lot of ifs everywhere because they consider two
different cases, one which is where the connection exists and has a file
descriptor, and the other one which is the default case where at most an
applet has to be notified.
Let's have them in si_ops and automatically decide which one to use.
The connection shutdown sequence has been slightly simplified, and we
now clear the flags at the end.
Also we remove SHUTR_NOW after a shutw with nolinger, as it's cleaner
not to keep it.
There is a big trouble with the way POST is handled for the admin
stats page. The POST parameters are extracted from some http-request
rules, and if not round they return zero hoping for being called again
when more data passes. This results in the HTTP analyser being called
several times and all the rules prior to the stats being executed
multiple times as well. That includes rewrite rules.
So instead of doing this, we now move all the processing of the stats
into the stats applet.
That way we just set the stats applet in the HTTP analyser when a stats
request is detected, and the applet takes the time it needs to read the
arguments and respond. We could even imagine improving the applet to
support requests larger than a single buffer.
The code was almost only moved and minimally changed. Several new HTTP
states were added to the stats applet to emit headers, redirects and
to read POST. It was necessary to do this because the headers sent
depend on the parsing of the POST request. In the end it's beneficial
because we removed two stream_int_retnclose() calls.
In preparation for moving the POST processing to the applet, we first
add new states to the HTTP I/O handler. Till now st0 was only 0/1 for
start/end. We now replace it with an enum.
We make the peers code use applet->ptr instead of conn->xprt_ctx to
store the pointer to the current peer. That way it does not depend
on a connection anymore.
We're trying to move the applets out of the struct connection. So
let's remove the dependence on xprt_st and introduce si->applet.st2
to store the missing contextual data instead.
The store[] array in the session holds a flag which probably aimed to
differenciate store entries learned from the request from those learned
from the response, and allowing responses to overwrite only the request
ones (eg: have a server set a response cookie which overwrites the request
one).
But this flag is set when a response data is stored, and is never cleared.
So in practice, haproxy always runs with this flag set, meaning that
responses prevent themselves from overriding the request data.
It is desirable anyway to keep the ability not to override data, because
the override is performed only based on the table and not on the key, so
that would mean that it would be impossible to retrieve two different
keys to store into a same table. For example, if a client sets a cookie
and a server another one, both need to be updated in the table in the
proper order. This is especially true when multiple keys may be tracked
on each side into the same table (eg: list of IP addresses in a header).
So the correct fix which also maintains the current behaviour consists in
simply removing this flag and never try to optimize for the overwrite case.
This fix also has the benefit of significantly reducing the session size,
by 64 bytes due to alignment issues caused by this flag!
The bug has been there forever (since 1.4-dev7), so a backport to 1.4
would be appropriate.
In recent commit 5ecb77f (MEDIUM: checks: add send/expect tcp based check),
bitfields were mistakenly used at some places for the actions. Fortunately,
the only two actions right now are 1 and 2 so they don't share any bit in
common and the bug has no impact.
No backport is needed.
This is a generic health check which can be used to match a
banner or send a request and analyse a server response.
It works in a send/expect ways and many exchange can be done between
HAProxy and a server to decide the server status, making HAProxy able to
speak the server's protocol.
It can send arbitrary regular or binary strings and match content as a
regular or binary string or a regex.
Signed-off-by: Baptiste Assmann <bedis9@gmail.com>
We currently use such an hex parser in pat_parse_bin() to parse hex
string patterns. We'll need another generic one so let's move it to
standard.c and have pat_parse_bin() make use of it.
This patch permits to use the same struct pattern for two indentical maps.
This permits to preserve memory, and permits to update only one
"struct pattern" when the dynamic map update is supported.
We handle "http-request redirect" with a log-format string now, but we
leave "redirect" unaffected.
Note that the control of the special "/" case is move from the runtime
execution to the configuration parsing. If the format rule list is
empty, the build_logline() function does nothing.
Add a new converter with the following prototype :
map(<map_file>[,<default_value>])
map_<match_type>(<map_file>[,<default_value>])
map_<match_type>_<output_type>(<map_file>[,<default_value>])
It searches the for input value from <map_file> using the <match_type>
matching method, and return the associated value converted to the type
<output_type>. If the input value cannot be found in the <map_file>,
the converter returns the <default_value>. If the <default_value> is
not set, the converter fails and acts as if no input value could be
fetched. If the <match_type> is not set, it defaults to "str".
Likewise, if the <output_type> is not set, it defaults to "str". For
convenience, the "map" keyword is an alias for "map_str" and maps a
string to another string. The following array contains contains the
list of all the map* converters.
+----+----------+---------+-------------+------------+
| `-_ out | | | |
| input `-_ | str | int | ip |
| / match `-_ | | | |
+---------------+---------+-------------+------------+
| str / str | map_str | map_str_int | map_str_ip |
| str / sub | map_sub | map_sub_int | map_sub_ip |
| str / dir | map_dir | map_dir_int | map_dir_ip |
| str / dom | map_dom | map_dom_int | map_dom_ip |
| str / end | map_end | map_end_int | map_end_ip |
| str / reg | map_reg | map_reg_int | map_reg_ip |
| int / int | map_int | map_int_int | map_int_ip |
| ip / ip | map_ip | map_ip_int | map_ip_ip |
+---------------+---------+-------------+------------+
The names are intentionally chosen to reflect the same match methods
as ACLs use.
This patch allows each sample cast function to specify the sample
output type. The goal is to be able to emit an output type IPv4 or
IPv6 depending on what is found in the input if the next converter
is able to process them both.
The patch also adds a new pseudo type called "ADDR". This type is an
alias for IPV4 and IPV6 which is only used as an input type by converters
who want to express their compatibility with both address formats. It may
not be emitted.
The goal is to unify as much as possible the processing of IPv4 and IPv6
in order not to add extra keywords for the maps which act as converters,
but will match samples like ACLs do with their patterns.
We now have the following enums and all related functions return them and
consume them :
enum pat_match_res {
PAT_NOMATCH = 0, /* sample didn't match any pattern */
PAT_MATCH = 3, /* sample matched at least one pattern */
};
enum acl_test_res {
ACL_TEST_FAIL = 0, /* test failed */
ACL_TEST_MISS = 1, /* test may pass with more info */
ACL_TEST_PASS = 3, /* test passed */
};
enum acl_cond_pol {
ACL_COND_NONE, /* no polarity set yet */
ACL_COND_IF, /* positive condition (after 'if') */
ACL_COND_UNLESS, /* negative condition (after 'unless') */
};
It's just in order to avoid doubts when reading some code.
This patch just renames functions, types and enums. No code was changed.
A significant number of files were touched, especially the ACL arrays,
so it is likely that some external patches will not apply anymore.
One important thing is that we had to split ACL_PAT_* into two groups :
- ACL_TEST_{PASS|MISS|FAIL}
- PAT_{MATCH|UNMATCH}
A future patch will enforce enums on all these places to avoid confusion.
This patch just moves code without any change.
The ACL are just the association between sample and pattern. The pattern
contains the match method and the parse method. These two things are
different. This patch cleans the code by splitting it.
This will be used later with maps. Each map will associate an entry with
a sample_storage value.
This patch changes the "parse" prototype and all the parsing methods.
The goal is to associate "struct sample_storage" to each entry of
"struct acl_pattern". Only the "parse" function can add the sample value
into the "struct acl_pattern".
This struct is used to store a sample constant. The size of this
struct is less than the struct sample. This struct only contains
a constant and doesn't need the "ctx" nor the "flags".
The map feature will need to match acl patterns. This patch extracts
the matching function from the global ACL function "acl_exec_cond".
The code was only moved to its own function, no functional changes were made.
With this split, the pattern indexation can apply to any source. The map
feature needs this functionality because the map cannot be loaded with the
same file format as the ones supported by acl_read_patterns_from_file().
The code was only moved to its own function, no functional changes were made.
The inet_pton function needs an input string with a final \0. This
function copies the input string to a temporary buffer, adds the final
\0 and converts to address.
If the acl keyword is a "fetch", the dedicated parsing function
"sample_parse_expr()" is used. Otherwise, the acl parsing function
"parse_acl_expr()" is extended to understand the syntax of a series
of converters placed after the "fetch" keyword.
Before this patch, each acl uses a "struct sample_fetch" and executes
it with the "<fetch>->process()" function. Now, the dedicated function
"sample_process()" is called.
These syntax are now avalaible:
acl bad req.hdr(host),lower -m str www
http-request redirect prefix /go-away if bad
acl bad hdr_beg(host),lower www
http-request redirect prefix /go-away if bad
When parsing track-sc* actions in tcp-request rules, we now automatically
compute the track-sc identifier number using %d when displaying an error
message. But the ID has become wrong since we introduced sc0, we continue
to report id+1 in error messages causing some confusion.
No backport is needed.
Add a DRAIN sub-state for a server which
will be shown on the stats page instead of UP if
its effective weight is zero.
Also, log if a server enters or leaves the DRAIN state
as the result of an agent check.
Signed-off-by: Simon Horman <horms@verge.net.au>
The syntax of this new commands are:
enable agent <backend>/<server>
disable agent <backend>/<server>
These commands allow temporarily stopping and subsequently
re-starting an auxiliary agent check. The effect of this is as follows:
New checks are only initialised when the agent is in the enabled. Thus,
disable agent will prevent any new agent checks from begin initiated until
the agent re-enabled using enable agent.
When an agent is disabled the processing of an auxiliary agent check that
was initiated while the agent was set as enabled is as follows: All
results that would alter the weight, specifically "drain" or a weight
returned by the agent, are ignored. The processing of agent check is
otherwise unchanged.
The motivation for this feature is to allow the weight changing effects
of the agent checks to be paused to allow the weight of a server to be
configured using set weight without being overridden by the agent.
Signed-off-by: Simon Horman <horms@verge.net.au>
This is achieved by moving rise and fall from struct server to struct check.
After this move the behaviour of the primary check, server->check is
unchanged. However, the secondary agent check, server->agent now has
independent rise and fall values each of which are set to 1.
The result is that receiving "fail", "stopped" or "down" just once from the
agent will mark the server as down. And receiving a weight just once will
allow the server to be marked up if its primary check is in good health.
This opens up the scope to allow the rise and fall values of the agent
check to be configurable, however this has not been implemented at this
stage.
Signed-off-by: Simon Horman <horms@verge.net.au>
Allow an auxiliary agent check to be run independently of the
regular a regular health check. This is enabled by the agent-check
server setting.
The agent-port, which specifies the TCP port to use for the agent's
connections, is required.
The agent-inter, which specifies the interval between agent checks and
timeout of agent checks, is optional. If not set the value for regular
checks is used.
e.g.
server web1_1 127.0.0.1:80 check agent-port 10000
If either the health or agent check determines that a server is down
then it is marked as being down, otherwise it is marked as being up.
An agent health check performed by opening a TCP socket and reading an
ASCII string. The string should have one of the following forms:
* An ASCII representation of an positive integer percentage.
e.g. "75%"
Values in this format will set the weight proportional to the initial
weight of a server as configured when haproxy starts.
* The string "drain".
This will cause the weight of a server to be set to 0, and thus it
will not accept any new connections other than those that are
accepted via persistence.
* The string "down", optionally followed by a description string.
Mark the server as down and log the description string as the reason.
* The string "stopped", optionally followed by a description string.
This currently has the same behaviour as "down".
* The string "fail", optionally followed by a description string.
This currently has the same behaviour as "down".
Signed-off-by: Simon Horman <horms@verge.net.au>
The column used to report the throttle percentage when a server is in
slowstart is based on the time only. This is wrong, because server weights
in slowstart are updated at most once a second, so the reported value is
wrong at least fo rone second during each step, which means all the time
when using short delays (< 20s).
The second point is that it's disturbing to see a weight < 100% without
any throttle at the end of the period (during the last second), because
the effective weight has not yet been updated.
Instead, we now compute the exact ratio between eweight and uweight and
report it. It's always accurate and describes the value being used instead
of using only the date.
It can be backported to 1.4 though it's not particularly important.
A crash was reported by Igor at owind when changing a server's weight
on the CLI. Lukas Tribus could reproduce a related bug where setting
a server's weight would result in the new weight being multiplied by
the initial one. The two bugs are the same.
The incorrect weight calculation results in the total farm weight being
larger than what was initially allocated, causing the map index to be out
of bounds on some hashes. It's easy to reproduce using "balance url_param"
with a variable param, or with "balance static-rr".
It appears that the calculation is made at many places and is not always
right and not always wrong the same way. Thus, this patch introduces a
new function "server_recalc_eweight()" which is dedicated to this task
of computing ->eweight from many other elements including uweight and
current time (for slowstart), and all users now switch to use this
function.
The patch is a bit large but the code was not trivially fixable in a way
that could guarantee this situation would not occur anymore. The fix is
much more readable and has been verified to work with all algorithms,
with both consistent and map-based hashes, and even with static-rr.
Slowstart was tested as well, just like enable/disable server.
The same bug is very likely present in 1.4 as well, so the patch will
probably need to be backported eventhough it will not apply as-is.
Thanks to Lukas and Igor for the information they provided to reproduce it.
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
Signed-off-by: Simon Horman <horms@verge.net.au>
Add state to struct check. This is currently used to store one bit,
CHK_RUNNING, which is set if a check is running and clear otherwise.
This bit was previously SRV_CHK_RUNNING of the state element of struct
server.
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Paramatise the following functions over the check of a server
* set_server_down
* set_server_up
* srv_getinter
* server_status_printf
* set_server_check_status
* set_server_disabled
* set_server_enabled
Generally the server parameter of these functions has been removed.
Where it is still needed it is obtained using check->server.
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
By paramatising these functions they may act on each of the checks
without further significant modification.
Explanation of the SSP_O_HCHK portion of this change:
* Prior to this patch SSP_O_HCHK serves a single purpose which
is to tell server_status_printf() weather it should print
the details of the check of a server or not.
With the paramatisation that this patch adds there are two cases.
1) Printing the details of the check in which case a
valid check parameter is needed.
2) Not printing the details of the check in which case
the contents check parameter are unused.
In case 1) we could pass SSP_O_HCHK and a valid check and;
In case 2) we could pass !SSP_O_HCHK and any value for check
including NULL.
If NULL is used for case 2) then SSP_O_HCHK becomes supurfulous
and as NULL is used for case 2) SSP_O_HCHK has been removed.
Signed-off-by: Simon Horman <horms@verge.net.au>
Move result element from struct server to struct check
This allows check results to be independent of the check's server.
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
Signed-off-by: Simon Horman <horms@verge.net.au>
This is in preparation for associating a agent check
with a server which runs as well as the server's existing check.
The split has been made by:
* Moving elements of struct server's check element that will
be shared by both checks into a new check_common element
of struct server.
* Moving the remaining elements to a new struct check and
making struct server's check element a struct check.
* Adding a server element to struct check, a back-pointer
to the server element it is a member of.
- At this time the server could be obtained using
container_of, however, this will not be so easy
once a second struct check element is added to struct server
to accommodate an agent health check.
Signed-off-by: Simon Horman <horms@verge.net.au>
This was inadvertently added by "MEDIUM: checks: Add agent health check".
It appears to have never been used.
Signed-off-by: Simon Horman <horms@verge.net.au>
This function was designed for haproxy while testing other functions
in the past. Initially it was not planned to be used given the not
very interesting numbers it showed on real URL data : it is not as
smooth as the other ones. But later tests showed that the other ones
are extremely sensible to the server count and the type of input data,
especially DJB2 which must not be used on numeric input. So in fact
this function is still a generally average performer and it can make
sense to merge it in the end, as it can provide an alternative to
sdbm+avalanche or djb2+avalanche for consistent hashing or when hashing
on numeric data such as a source IP address or a visitor identifier in
a URL parameter.
Summary:
Avalanche is supported not as a native hashing choice, but a modifier
on the hashing function. Note that this means that possible configs
written after 1.5-dev4 using "hash-type avalanche" will get an informative
error instead. But as discussed on the mailing list it seems nobody ever
used it anyway, so let's fix it before the final 1.5 release.
The default values were selected for backward compatibility with previous
releases, as discussed on the mailing list, which means that the consistent
hashing will still apply the avalanche hash by default when no explicit
algorithm is specified.
Examples
(default) hash-type map-based
Map based hashing using sdbm without avalanche
(default) hash-type consistent
Consistent hashing using sdbm with avalanche
Additional Examples:
(a) hash-type map-based sdbm
Same as default for map-based above
(b) hash-type map-based sdbm avalanche
Map based hashing using sdbm with avalanche
(c) hash-type map-based djb2
Map based hashing using djb2 without avalanche
(d) hash-type map-based djb2 avalanche
Map based hashing using djb2 with avalanche
(e) hash-type consistent sdbm avalanche
Same as default for consistent above
(f) hash-type consistent sdbm
Consistent hashing using sdbm without avalanche
(g) hash-type consistent djb2
Consistent hashing using djb2 without avalanche
(h) hash-type consistent djb2 avalanche
Consistent hashing using djb2 with avalanche
Summary:
In testing at tumblr, we found that using djb2 hashing instead of the
default sdbm hashing resulted is better workload distribution to our backends.
This commit implements a change, that allows the user to specify the hash
function they want to use. It does not limit itself to consistent hashing
scenarios.
The supported hash functions are sdbm (default), and djb2.
For a discussion of the feature and analysis, see mailing list thread
"Consistent hashing alternative to sdbm" :
http://marc.info/?l=haproxy&m=138213693909219
Note: This change does NOT make changes to new features, for instance,
applying an avalance hashing always being performed before applying
consistent hashing.
If haproxy is compiled with the USE_PCRE_JIT option, the length of the
string is used. If it is compiled without this option the function doesn't
use the length and expects a null terminated string.
The prototype of the function is ambiguous, and depends on the
compilation option. The developer can think that the length is always
used, and many bugs can be created.
This patch makes sure that the length is used. The regex_exec function
adds the final '\0' if it is needed.
The current file "regex.h" define an abstraction for the regex. It
provides the same struct name and the same "regexec" function for the
3 regex types supported: standard libc, basic pcre and jit pcre.
The regex compilation function is not provided by this file. If the
developper wants to use regex, he must write regex compilation code
containing "#define *JIT*".
This patch provides a unique regex compilation function according to
the compilation options.
In addition, the "regex.h" file checks the presence of the "#define
PCRE_CONFIG_JIT" when "USE_PCRE_JIT" is enabled. If this flag is not
present, the pcre lib doesn't support JIT and "#error" is emitted.
This new action immediately closes the connection with the server
when the condition is met. The first such rule executed ends the
rules evaluation. The main purpose of this action is to force a
connection to be finished between a client and a server after an
exchange when the application protocol expects some long time outs
to elapse first. The goal is to eliminate idle connections which
take signifiant resources on servers with certain protocols.
When a process with large stick tables is replaced by a new one and remains
present until the last connection finishes, it keeps these data in memory
for nothing since they will never be used anymore by incoming connections,
except during syncing with the new process. This is especially problematic
when dealing with long session protocols such as WebSocket as it becomes
possible to stack many processes and eat a lot of memory.
So the idea here is to know if a table still needs to be synced or not,
and to purge all unused entries once the sync is complete. This means that
after a few hundred milliseconds when everything has been synchronized with
the new process, only a few entries will remain allocated (only the ones
held by sessions during the restart) and all the remaining memory will be
freed.
Note that we carefully do that only after the grace period is expired so as
not to impact a possible proxy that needs to accept a few more connections
before leaving.
Doing this required to add a sync counter to the stick tables, to know how
many peer sync sessions are still in progress in order not to flush the entries
until all synchronizations are completed.
verifyhost allows you to specify a hostname that the remote server's
SSL certificate must match. Connections that don't match will be
closed with an SSL error.
The HTTP request counter is incremented non atomically, which means that
many requests can log the same ID. Let's increment it when it is consumed
so that we avoid this case.
This bug was reported by Patrick Hemmer. It's 1.5-specific and does not
need to be backported.
The "set table" statement allows to create new entries with their respective
values. Till now it was limited to a single data type per line, requiring as
many "set table" statements as the desired data types to be set. Since this
is only a parser limitation, this patch gets rid of it. It also allows the
creation of a key with no data types (all reset to their default values).
In preparation of more flexibility in the stick counters, make their
number configurable. It still defaults to 3 which is the minimum
accepted value. Changing the value alone is not sufficient to get
more counters, some bitfields still need to be updated and the TCP
actions need to be updated as well, but this update tries to be
easier, which is nice for experimentation purposes.
This function is also called directly from backend.c, so let's stop
building fake args to call it as a sample fetch, and have a lower
layer more generic function instead.
We're having a lot of duplicate code just because of minor variants between
fetch functions that could be dealt with if the functions had the pointer to
the original keyword, so let's pass it as the last argument. An earlier
version used to pass a pointer to the sample_fetch element, but this is not
the best solution for two reasons :
- fetch functions will solely rely on the keyword string
- some other smp_fetch_* users do not have the pointer to the original
keyword and were forced to pass NULL.
So finally we're passing a pointer to the keyword as a const char *, which
perfectly fits the original purpose.
The max weight of server is 256 now, but SRV_UWGHT_MAX is still 255. As a result,
FWRR will not work well when server's weight is 256. The description is as below:
There are some macros related to server's weight in include/types/server.h:
#define SRV_UWGHT_RANGE 256
#define SRV_UWGHT_MAX (SRV_UWGHT_RANGE - 1)
#define SRV_EWGHT_MAX (SRV_UWGHT_MAX * BE_WEIGHT_SCALE)
Since weight of server can be reach to 256 and BE_WEIGHT_SCALE equals to 16,
the max eweight of server should be 256*16 = 4096, it will exceed SRV_EWGHT_MAX
which equals to SRV_UWGHT_MAX*BE_WEIGHT_SCALE = 255*16 = 4080. When a server
with weight 256 is insterted into FWRR tree during initialization, the key value
of this server should be SRV_EWGHT_MAX - s->eweight = 4080 - 4096 = -16 which
is closed to UINT_MAX in unsigned type, so the server with highest weight will
be not elected as the first server to process request.
In addition, it is a better choice to compare with SRV_UWGHT_MAX than a magic
number 256 while doing check for the weight. The max number of servers for
round-robin algorithm is also updated.
Signed-off-by: Godbach <nylzhaowei@gmail.com>
As per RFC3260 #4 and BCP37 #4.2 and #5.2, the IPv6 counterpart of TOS
is "traffic class".
Add support for IPv6 traffic class in "set-tos" by moving the "set-tos"
related code to the new inline function inet_set_tos(), handling IPv4
(IP_TOS), IPv6 (IPV6_TCLASS) and IPv4-mapped sockets (IP_TOS, like
::ffff:127.0.0.1).
Also define - if missing - the IN6_IS_ADDR_V4MAPPED() macro in
include/common/compat.h for compatibility.
Benoit Dolez reported a failure to start haproxy 1.5-dev19. The
process would immediately report an internal error with missing
fetches from some crap instead of ACL names.
The cause is that some versions of gcc seem to trim static structs
containing a variable array when moving them to BSS, and only keep
the fixed size, which is just a list head for all ACL and sample
fetch keywords. This was confirmed at least with gcc 3.4.6. And we
can't move these structs to const because they contain a list element
which is needed to link all of them together during the parsing.
The bug indeed appeared with 1.5-dev19 because it's the first one
to have some empty ACL keyword lists.
One solution is to impose -fno-zero-initialized-in-bss to everyone
but this is not really nice. Another solution consists in ensuring
the struct is never empty so that it does not move there. The easy
solution consists in having a non-null list head since it's not yet
initialized.
A new "ILH" list head type was thus created for this purpose : create
an Initialized List Head so that gcc cannot move the struct to BSS.
This fixes the issue for this version of gcc and does not create any
burden for the declarations.
Remove event_accept() in include/proto/proto_http.h and use correct function
name in other two files instead of event_accept().
Signed-off-by: Godbach <nylzhaowei@gmail.com>
It was a bit inconsistent to have gpc start at 0 and sc start at 1,
so make sc start at zero like gpc. No previous release was issued
with sc3 anyway, so no existing setup should be affected.
This configures the client-facing connection to receive a PROXY protocol
header before any byte is read from the socket. This is equivalent to
having the "accept-proxy" keyword on the "bind" line, except that using
the TCP rule allows the PROXY protocol to be accepted only for certain
IP address ranges using an ACL. This is convenient when multiple layers
of load balancers are passed through by traffic coming from public
hosts.
"set-mark" is used to set the Netfilter MARK on all packets sent to the
client to the value passed in <mark> on platforms which support it. This
value is an unsigned 32 bit value which can be matched by netfilter and
by the routing table. It can be expressed both in decimal or hexadecimal
format (prefixed by "0x"). This can be useful to force certain packets to
take a different route (for example a cheaper network path for bulk
downloads). This works on Linux kernels 2.6.32 and above and requires
admin privileges.
This manipulates the TOS field of the IP header of outgoing packets sent
to the client. This can be used to set a specific DSCP traffic class based
on some request or response information. See RFC2474, 2597, 3260 and 4594
for more information.
Some users want to disable logging for certain non-important requests such as
stats requests or health-checks coming from another equipment. Other users want
to log with a higher importance (eg: notice) some special traffic (POST requests,
authenticated requests, requests coming from suspicious IPs) or some abnormally
large responses.
This patch responds to all these needs at once by adding a "set-log-level" action
to http-request/http-response. The 8 syslog levels are supported, as well as "silent"
to disable logging.
Some actions were clearly missing to process response headers. This
patch adds a new "http-response" ruleset which provides the following
actions :
- allow : stop evaluating http-response rules
- deny : stop and reject the response with a 502
- add-header : add a header in log-format mode
- set-header : set a header in log-format mode
Since commit cfd97c6f was merged into 1.5-dev14 (BUG/MEDIUM: checks:
prevent TIME_WAITs from appearing also on timeouts), some valid health
checks sometimes used to show some TCP resets. For example, this HTTP
health check sent to a local server :
19:55:15.742818 IP 127.0.0.1.16568 > 127.0.0.1.8000: S 3355859679:3355859679(0) win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
19:55:15.742841 IP 127.0.0.1.8000 > 127.0.0.1.16568: S 1060952566:1060952566(0) ack 3355859680 win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
19:55:15.742863 IP 127.0.0.1.16568 > 127.0.0.1.8000: . ack 1 win 257
19:55:15.745402 IP 127.0.0.1.16568 > 127.0.0.1.8000: P 1:23(22) ack 1 win 257
19:55:15.745488 IP 127.0.0.1.8000 > 127.0.0.1.16568: FP 1:146(145) ack 23 win 257
19:55:15.747109 IP 127.0.0.1.16568 > 127.0.0.1.8000: R 23:23(0) ack 147 win 257
After some discussion with Chris Huang-Leaver, it appeared clear that
what we want is to only send the RST when we have no other choice, which
means when the server has not closed. So we still keep SYN/SYN-ACK/RST
for pure TCP checks, but don't want to see an RST emitted as above when
the server has already sent the FIN.
The solution against this consists in implementing a "drain" function at
the protocol layer, which, when defined, causes as much as possible of
the input socket buffer to be flushed to make recv() return zero so that
we know that the server's FIN was received and ACKed. On Linux, we can make
use of MSG_TRUNC on TCP sockets, which has the benefit of draining everything
at once without even copying data. On other platforms, we read up to one
buffer of data before the close. If recv() manages to get the final zero,
we don't disable lingering. Same for hard errors. Otherwise we do.
In practice, on HTTP health checks we generally find that the close was
pending and is returned upon first recv() call. The network trace becomes
cleaner :
19:55:23.650621 IP 127.0.0.1.16561 > 127.0.0.1.8000: S 3982804816:3982804816(0) win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
19:55:23.650644 IP 127.0.0.1.8000 > 127.0.0.1.16561: S 4082139313:4082139313(0) ack 3982804817 win 32792 <mss 16396,nop,nop,sackOK,nop,wscale 7>
19:55:23.650666 IP 127.0.0.1.16561 > 127.0.0.1.8000: . ack 1 win 257
19:55:23.651615 IP 127.0.0.1.16561 > 127.0.0.1.8000: P 1:23(22) ack 1 win 257
19:55:23.651696 IP 127.0.0.1.8000 > 127.0.0.1.16561: FP 1:146(145) ack 23 win 257
19:55:23.652628 IP 127.0.0.1.16561 > 127.0.0.1.8000: F 23:23(0) ack 147 win 257
19:55:23.652655 IP 127.0.0.1.8000 > 127.0.0.1.16561: . ack 24 win 257
This change should be backported to 1.4 which is where Chris encountered
this issue. The code is different, so probably the tcp_drain() function
will have to be put in the checks only.
The req.hdr and res.hdr fetch methods do not work well on headers which
are allowed to contain commas, such as User-Agent, Date or Expires.
More specifically, full-length matching is impossible if a comma is
present.
This patch introduces 4 new fetch functions which are designed to work
with these full-length headers :
- req.fhdr, req.fhdr_cnt
- res.fhdr, res.fhdr_cnt
These ones do not stop at commas and permit to return full-length header
values.
People who use "option dontlog-normal" are bothered with redirects and
stats being logged and reported as errors in the logs ("PR" = proxy
blocked the request).
This patch introduces a new flag 'L' for when a request is locally
processed, that is not considered as an error by the log filters. That
way we know a request was intercepted and processed by haproxy without
logging the line when "option dontlog-normal" is in effect.
Since 1.5-dev12 and commit 3bf1b2b8 (MAJOR: channel: stop relying on
BF_FULL to take action), the HTTP parser switched to channel_full()
instead of BF_FULL to decide whether a buffer had enough room to start
parsing a request or response. The problem is that channel_full()
intentionally ignores outgoing data, so a corner case exists where a
large response might still be left in a response buffer with just a
few bytes left (much less than the reserve), enough to accept a second
response past the last data, but not enough to permit the HTTP processor
to add some headers. Since all the processing relies on this space being
available, we can get some random crashes when clients pipeline requests.
The analysis of a core from haproxy configured with 20480 bytes buffers
shows this : with enough "luck", when sending back the response for the
first request, the client is slow, the TCP window is congested, the socket
buffers are full, and haproxy's buffer fills up. We still have 20230 bytes
of response data in a 20480 response buffer. The second request is sent to
the server which returns 214 bytes which fit in the small 250 bytes left
in this buffer. And the buffer arrangement makes it possible to escape all
the controls in http_wait_for_response() :
|<------ response buffer = 20480 bytes ------>|
[ 2/2 | 3 | 4 | 1/2 ]
^ start of circular buffer
1/2 = beginning of previous response (18240)
2/2 = end of previous response (1990)
3 = current response (214)
4 = free space (36)
- channel_full() returns false (20230 bytes are going to leave)
- the response headers does not wrap at the end of the buffer
- the remaining linear room after the headers is larger than the
reserve, because it's the previous response which wraps :
=> response is processed
Header rewriting causes it to reach 260 bytes, 10 bytes larger than what
the buffer could hold. So all computations during header addition are
wrong and lead to the corruption we've observed.
All the conditions are very hard to meet (which explains why it took
almost one year for this bug to show up) and are almost impossible to
reproduce on purpose on a test platform. But the bug is clearly there.
This issue was reported by Dinko Korunic who kindly devoted a lot of
time to provide countless traces and cores, and to experiment with
troubleshooting patches to knock the bug down. Thanks Dinko!
No backport is needed, but all 1.5-dev versions between dev12 and dev18
included must be upgraded. A workaround consists in setting option
forceclose to prevent pipelined requests from being processed.
We're often missin a third counter to track base, src and base+src at
the same time. Here we introduce track_sc3 to have this third counter.
It would be wise not to add much more counters because that slightly
increases the session size and processing time though the real issue
is more the declaration of the keywords in the code and in the doc.
By properly affecting the flags and values, it becomes easier to add
more tracked counters, for example for experimentation. It also slightly
reduces the code and the number of tests. No counters were added with
this patch.
FreeBSD uses (IPPROTO_IP, IP_BINDANY) and (IPPROTO_IPV6, IPV6_BINDANY)
to enable transparent proxy on a socket.
This patch adds support for the relevant setsockopt() calls.
This patch does not change the logic of the code, it only changes the
way OS-specific defines are tested.
At the moment the transparent proxy code heavily depends on Linux-specific
defines. This first patch introduces a new define "CONFIG_HAP_TRANSPARENT"
which is set every time the defines used by transparent proxy are present.
This also means that with an up-to-date libc, it should not be necessary
anymore to force CONFIG_HAP_LINUX_TPROXY during the build, as the flags
will automatically be detected.
The CTTPROXY flags still remain separate because this older API doesn't
work the same way.
A new line has been added in the version output for haproxy -vv to indicate
what transparent proxy support is available.
When freeing ACL regex, we don't want to perform the free() in regex_free()
as it's already performed in free_pattern(). The double free only happens
when using PCRE_JIT when freeing everything during exit so it's harmless
but exhibits libc errors during a reload/restart.
Bug reported by Seri.
Improve the crt-list file format to allow a rule to negate a certain SNI :
<crtfile> [[!]<snifilter> ...]
This can be useful when a domain supports a wildcard but you don't want to
deliver the wildcard cert for certain specific domains.
This patch adds a "scope" box in the statistics page in order to
display only proxies with a name that contains the requested value.
The scope filter is preserved across all clicks on the page.
Commit a4312fa2 merged into dev18 improved log-format management by
processing "log-format" and "unique-id-format" where they were declared,
so that the faulty args could be reported with their correct line numbers.
Unfortunately, the log-format parser considers the proxy mode (TCP/HTTP)
and now if the directive is set before the "mode" statement, it can be
rejected and report warnings.
So we really need to parse these directives at the end of a section at
least. Right now we do not have an "end of section" event, so we need
to store the file name and line number for each of these directives,
and take care of them at the end.
One of the benefits is that now the line numbers can be inherited from
the line passing "option httplog" even if it's in a defaults section.
Future improvements should be performed to report line numbers in every
log-format processed by the parser.
The ALPN extension is meant to replace the now deprecated NPN extension.
This patch implements support for it. It requires a version of openssl
with support for this extension. Patches are available here right now :
http://html5labs.interopbridges.com/media/167447/alpn_patches.zip
While ACL args were resolved after all the config was parsed, it was not the
case with sample fetch args because they're almost everywhere now.
The issue is that ACLs now solely rely on sample fetches, so their args
resolving doesn't work anymore. And many fetches involving a server, a
proxy or a userlist don't work at all.
The real issue is that at the bottom layers we have no information about
proxies, line numbers, even ACLs in order to report understandable errors,
and that at the top layers we have no visibility over the locations where
fetches are referenced (think log node).
After failing multiple unsatisfying solutions attempts, we now have a new
concept of args list. The principle is that every proxy has a list head
which contains a number of indications such as the config keyword, the
context where it's used, the file and line number, etc... and a list of
arguments. This list head is of the same type as the elements, so it
serves as a template for adding new elements. This way, it is filled from
top to bottom by the callers with the information they have (eg: line
numbers, ACL name, ...) and the lower layers just have to duplicate it and
add an element when they face an argument they cannot resolve yet.
Then at the end of the configuration parsing, a loop passes over each
proxy's list and resolves all the args in sequence. And this way there is
all necessary information to report verbose errors.
The first immediate benefit is that for the first time we got very precise
location of issues (arg number in a keyword in its context, ...). Second,
in order to do this we had to parse log-format and unique-id-format a bit
earlier, so that was a great opportunity for doing so when the directives
are encountered (unless it's a default section). This way, the recorded
line numbers for these args are the ones of the place where the log format
is declared, not the end of the file.
Userlists report slightly more information now. They're the only remaining
ones in the ACL resolving function.
The acl_expr struct used to hold a pointer to the ACL keyword. But since
we now have all the relevant pointers, we don't need that anymore, we just
need the pointer to the keyword as a string in order to return warnings
and error messages.
So let's change this in order to remove the dependency on the acl_keyword
struct from acl_expr.
During this change, acl_cond_kw_conflicts() used to return a pointer to an
ACL keyword but had to be changed to return a const char* for the same reason.
ACL expressions now support "-m" in addition to "-i" and "-f". This new
option is followed by the name of the pattern matching method to be used
on the extracted pattern. This makes it possible to reuse existing sample
fetch methods with other matching methods (eg: regex). A "found" matching
method ignores any pattern and only verifies that the required sample was
found (useful for cookies).
The ACLs now use the fetch's ->use and ->val to decide upon compatibility
between the place where they are used and where the information are fetched.
The code is capable of reporting warnings about very fine incompatibilities
between certain fetches and an exact usage location, so it is expected that
some new warnings will be emitted on some existing configurations.
Two degrees of detection are provided :
- detecting ACLs that never match
- detecting keywords that are ignored
All tests show that this seems to work well, though bugs are still possible.
Proxy's acl_requires was a copy of all bits taken from ACLs, but we'll
get rid of ACL flags and only rely on sample fetches soon. The proxy's
acl_requires was only used to allocate an HTTP context when needed, and
was even forced in HTTP mode. So better have a flag which exactly says
what it's supposed to be used for.
These hooks, which established the relation between ACL_USE_* and the location
where the ACL were used, were never used because they were superseded with the
sample capabilities. Remove them now.
ACL fetch being inherited from the sample fetch keyword, we don't need
anymore to specify what function to use to validate the fetch arguments.
Note that the job is still done in the ACL parsing code based on elements
from the sample fetch structs.
Now that ACLs solely rely on sample fetch functions, make them use the
same arg mask. All inconsistencies have been fixed separately prior to
this patch, so this patch almost only adds a new pointer indirection
and removes all references to ARG*() in the definitions.
The parsing is still performed by the ACL code though.
ACL fetch functions used to directly reference a fetch function. Now
that all ACL fetches have their sample fetches equivalent, we can make
ACLs reference a sample fetch keyword instead.
In order to simplify the code, a sample keyword name may be NULL if it
is the same as the ACL's, which is the most common case.
A minor change appeared, http_auth always expects one argument though
the ACL allowed it to be missing and reported as such afterwards, so
fix the ACL to match this. This is not really a bug.
The file acl.c is a real mess, it both contains functions to parse and
process ACLs, and some sample extraction functions which act on buffers.
Some other payload analysers were arbitrarily dispatched to proto_tcp.c.
So now we're moving all payload-based fetches and ACLs to payload.c
which is capable of extracting data from buffers and rely on everything
that is protocol-independant. That way we can safely inflate this file
and only use the other ones when some fetches are really specific (eg:
HTTP, SSL, ...).
As a result of this cleanup, the following new sample fetches became
available even if they're not really useful :
always_false, always_true, rep_ssl_hello_type, rdp_cookie_cnt,
req_len, req_ssl_hello_type, req_ssl_sni, req_ssl_ver, wait_end
The function 'acl_fetch_nothing' was wrong and never used anywhere so it
was removed.
The "rdp_cookie" sample fetch used to have a mandatory argument while it
was optional in ACLs, which are supposed to iterate over RDP cookies. So
we're making it optional as a fetch too, and it will return the first one.
If a log-format involves some sample fetches that may not be present at
the logging instant, we can now report a warning.
Note that this is done both for log-format and for add-header and carefully
respects the original fetch keyword's capabilities.
Samples fetches were relying on two flags SMP_CAP_REQ/SMP_CAP_RES to describe
whether they were compatible with requests rules or with response rules. This
was never reliable because we need a finer granularity (eg: an HTTP request
method needs to parse an HTTP request, and is available past this point).
Some fetches are also dependant on the context (eg: "hdr" uses request or
response depending where it's involved, causing some abiguity).
In order to solve this, we need to precisely indicate in fetches what they
use, and their users will have to compare with what they have.
So now we have a bunch of bits indicating where the sample is fetched in the
processing chain, with a few variants indicating for some of them if it is
permanent or volatile (eg: an HTTP status is stored into the transaction so
it is permanent, despite being caught in the response contents).
The fetches also have a second mask indicating their validity domain. This one
is computed from a conversion table at registration time, so there is no need
for doing it by hand. This validity domain consists in a bitmask with one bit
set for each usage point in the processing chain. Some provisions were made
for upcoming controls such as connection-based TCP rules which apply on top of
the connection layer but before instantiating the session.
Then everywhere a fetch is used, the bit for the control point is checked in
the fetch's validity domain, and it becomes possible to finely ensure that a
fetch will work or not.
Note that we need these two separate bitfields because some fetches are usable
both in request and response (eg: "hdr", "payload"). So the keyword will have
a "use" field made of a combination of several SMP_USE_* values, which will be
converted into a wider list of SMP_VAL_* flags.
The knowledge of permanent vs dynamic information has disappeared for now, as
it was never used. Later we'll probably reintroduce it differently when
dealing with variables. Its only use at the moment could have been to avoid
caching a dynamic rate measurement, but nothing is cached as of now.
This flag is used on ACL matches that support being looking up patterns
in trees. At the moment, only strings and IPs support tree-based lookups,
but the flag is randomly set also on integers and binary data, and is not
even always set on strings nor IPs.
Better get rid of this mess by only relying on the matching function to
decide whether or not it supports tree-based lookups, this is safer and
easier to maintain.
TCP Fast Open is supported in server mode since Linux 3.7, but current
libc's don't define TCP_FASTOPEN=23. Introduce the new USE flag USE_TFO
to define it manually in compat.h. Also note this in the TFO related
documentation.
Now that all addresses are parsed using str2sa_range(), it becomes easy
to add support for environment variables and use them everywhere an address
is needed. Environment variables are used as $VAR or ${VAR} as in shell.
Any number of variables may compose an address, allowing various fantasies
such as "fd@${FD_HTTP}" or "${LAN_DC1}.1:80".
These ones are usable in logs, bind, servers, peers, stats socket, source,
dispatch, and check address.
This change allows one to force the address family in any address parsed
by str2sa_range() by specifying it as a prefix followed by '@' then the
address. Currently supported address prefixes are 'ipv4@', 'ipv6@', 'unix@'.
This also helps forcing resolving for host names (when getaddrinfo is used),
and force the family of the empty address (eg: 'ipv4@' = 0.0.0.0 while
'ipv6@' = ::).
The main benefits is that unix sockets can now get a local name without
being forced to begin with a slash. This is useful during development as
it is no longer necessary to have stats socket sent to /tmp.
Don't use a statically allocated address both for str2ip and str2sa_range,
use the same. The inet and unix code paths have been splitted a little
better to improve readability.
We'll need str2sa_range() to support a prefix for unix sockets. Since
we don't always want to use it (eg: stats socket), let's not take it
unconditionally from global but let the caller pass it.
An invalid copy-paste called it NR_splice instead of NR_accept4.
This does not lead to real issues because if this define is used,
then the code cannot compile since NR_accept4 is still missing.
Add new tunable "tune.ssl.maxrecord".
Over SSL/TLS, the client can decipher the data only once it has received
a full record. With large records, it means that clients might have to
download up to 16kB of data before starting to process them. Limiting the
record size can improve page load times on browsers located over high
latency or low bandwidth networks. It is suggested to find optimal values
which fit into 1 or 2 TCP segments (generally 1448 bytes over Ethernet
with TCP timestamps enabled, or 1460 when timestamps are disabled), keeping
in mind that SSL/TLS add some overhead. Typical values of 1419 and 2859
gave good results during tests. Use "strace -e trace=write" to find the
best value.
This trick was first suggested by Mike Belshe :
http://www.belshe.com/2010/12/17/performance-and-the-tls-record-size/
Then requested again by Ilya Grigorik who provides some hints here :
http://ofps.oreilly.com/titles/9781449344764/_transport_layer_security_tls.html#ch04_00000101
Right now we have multiple methods for parsing IP addresses in the
configuration. This is quite painful. This patch aims at adapting
str2sa_range() to make it support all formats, so that the callers
perform the appropriate tests on the return values. str2sa() was
changed to simply return str2sa_range().
The output values are now the following ones (taken from the comment
on top of the function).
Converts <str> to a locally allocated struct sockaddr_storage *, and a port
range or offset consisting in two integers that the caller will have to
check to find the relevant input format. The following format are supported :
String format | address | port | low | high
addr | <addr> | 0 | 0 | 0
addr: | <addr> | 0 | 0 | 0
addr:port | <addr> | <port> | <port> | <port>
addr:pl-ph | <addr> | <pl> | <pl> | <ph>
addr:+port | <addr> | <port> | 0 | <port>
addr:-port | <addr> |-<port> | <port> | 0
The detection of a port range or increment by the caller is made by
comparing <low> and <high>. If both are equal, then port 0 means no port
was specified. The caller may pass NULL for <low> and <high> if it is not
interested in retrieving port ranges.
Note that <addr> above may also be :
- empty ("") => family will be AF_INET and address will be INADDR_ANY
- "*" => family will be AF_INET and address will be INADDR_ANY
- "::" => family will be AF_INET6 and address will be IN6ADDR_ANY
- a host name => family and address will depend on host name resolving.
Support for server side TFO was actually introduced in linux-3.7,
linux-3.6 just has client support.
This patch fixes documentation and a code comment about the
kernel requirement. It also fixes a wrong tfo related code
comment in src/proto_tcp.c.
Support a agent health check performed by opening a TCP socket to a
pre-defined port and reading an ASCII string. The string should have one of
the following forms:
* An ASCII representation of an positive integer percentage.
e.g. "75%"
Values in this format will set the weight proportional to the initial
weight of a server as configured when haproxy starts.
* The string "drain".
This will cause the weight of a server to be set to 0, and thus it will
not accept any new connections other than those that are accepted via
persistence.
* The string "down", optionally followed by a description string.
Mark the server as down and log the description string as the reason.
* The string "stopped", optionally followed by a description string.
This currently has the same behaviour as down (iii).
* The string "fail", optionally followed by a description string.
This currently has the same behaviour as down (iii).
A agent health check may be configured using "option lb-agent-chk".
The use of an alternate check-port, used to obtain agent heath check
information described above as opposed to the port of the service,
may be useful in conjunction with this option.
e.g.
option lb-agent-chk
server http1_1 10.0.0.10:80 check port 10000 weight 100
Signed-off-by: Simon Horman <horms@verge.net.au>
Break out set weight processing code.
This is in preparation for reusing the code.
Also, remove duplicate check in nested if clauses.
{px->lbprm.algo & BE_LB_PROP_DYN) is checked by
the immediate outer if clause, so there is no need
to check it a second time.
Signed-off-by: Simon Horman <horms@verge.net.au>
This corrects what appears to be logic errors in cut_crlf().
I assume that the intention of this function is to truncate a
string at the first cr or lf. However, currently lf are ignored.
Also use '\0' instead of 0 as the null character, a cosmetic change.
Cc: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Simon Horman <horms@verge.net.au>
[WT: this fix may be backported to 1.4 too]
This patch adds a new option "-Ds" which is exactly like "-D", but instead of
forking n times to get n jobs running and then exiting, prefers to wait for all the
children it just created. With this done, haproxy becomes more systemd-compliant,
without changing anything for other systems.
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
Commit 2b0108ad accidently got rid of the ability to emit a "-" for
empty log fields. This can happen for captured request and response
cookies, as well as for fetches. Since we don't want to have this done
for headers however, we set the default log method when parsing the
format. It is still possible to force the desired mode using +M/-M.
This new option ensures that there is no possible fallback to a default
certificate if the client does not provide an SNI which is explicitly
handled by a certificate.
Commit 290e63aa moved the unix parameters out of the global stats socket
to the bind_conf struct. As such the stats admin level was also moved
overthere, but it remained in the stats global section where it was not
used, except by a nasty memcpy() used to initialize the ux struct in the
bind_conf with too large data. Fortunately, the extra data copied were
the previous level over the new level so it did not have any impact, but
it could have been worse.
This bug is 1.5 specific, no backport is needed.
Reported-by: Dinko Korunic <dkorunic@reflected.net>
When a frontend is rate-limited to 1000 connections per second, the
effective rate measured from the client is 999/s, and connections
experience an average response time of 99.5 ms with a standard
deviation of 2 ms.
The reason for this inaccuracy is that when computing frequency
counters, we use one part of the previous value proportional to the
number of milliseconds remaining in the current second. But even the
last millisecond still uses a part of the past value, which is wrong :
since we have a 1ms resolution, the last millisecond must be dedicated
only to filling the current second.
So we slightly adjust the algorithm to use 999/1000 of the past value
during the first millisecond, and 0/1000 of the past value during the
last millisecond. We also slightly improve the computation by computing
the remaining time instead of the current time in tv_update_date(), so
that we don't have to negate the value in each frequency counter.
Now with the fix, the connection rate measured by both the client and
haproxy is a steady 1000/s, the average response time measured is 99.2ms
and more importantly, the standard deviation has been divided by 3 to
0.6 millisecond.
This fix should also be backported to 1.4 which has the same issue.
The "reqtarpit" rule is not very handy to use. Now that we have more
flexibility with "http-request", let's finally make the tarpit rules
usable there.
There are still semantical differences between apply_filters_to_request()
and http_req_get_intercept_rule() because the former updates the counters
while the latter does not. So we currently have almost similar code leafs
for similar conditions, but this should be cleaned up later.
These are exactly the same as the classic redirect rules except
that they can be interleaved with other http-request rules for
more flexibility.
The redirect parser should probably be changed to stop at the condition
so that the caller puts its own condition pointer. At the moment, the
redirect rule and condition are parsed at once by build_redirect_rule()
and the condition is assigned to the http_req_rule.
We now have http_apply_redirect_rule() which does all the redirect-specific
job instead of having this inside http_process_req_common().
Also one of the benefit gained from uniformizing this code is that both
keep-alive and close response do emit the PR-- flags. The fix for the
flags could probably be backported to 1.4 though it's very minor.
The previous function http_perform_redirect() was becoming confusing
so it was renamed http_perform_server_redirect() since it only applies
to server-based redirection.
It happens that all of them call parse_logformat_line() which sets
proxy->to_log with a number of flags affecting the line format for
all three users. For example, having a unique-id specified disables
the default log-format since fe->to_log is tested when the session
is established.
Similarly, having "option logasap" will cause "+" to be inserted in
unique-id or headers referencing some of the fields depending on
LW_BYTES.
This patch first removes most of the dependency on fe->to_log whenever
possible. The first possible cleanup is to stop checking fe->to_log
for being null, considering that it always contains at least LW_INIT
when any such usage is made of the log-format!
Also, some checks are wrong. s->logs.logwait cannot be nulled by
"logwait &= ~LW_*" since LW_INIT is always there. This results in
getting the wrong log at the end of a request or session when a
unique-id or add-header is set, because logwait is still not null
but the log-format is not checked.
Further cleanups are required. Most LW_* flags should be removed or at
least replaced with what they really mean (eg: depend on client-side
connection, depend on server-side connection, etc...) and this should
only affect logging, not other mechanisms.
This patch fixes the default log-format and tries to limit interferences
between the log formats, but does not pretend to do more for the moment,
since it's the most visible breakage.
These two new statements allow to pass information extracted from the request
to the server. It's particularly useful for passing SSL information to the
server, but may be used for various other purposes such as combining headers
together to emulate internal variables.
These macros (U2H, U2A, LIM2A, ...) have been used with an explicit
index for the local storage variable, making it difficult to change
log formats and causing a few issues from time to time. Let's have
a single macro with a rotating index so that up to 10 conversions
may be used in a single call.
At the moment, we need trash chunks almost everywhere and the only
correctly implemented one is in the sample code. Let's move this to
the chunks so that all other places can use this allocator.
Additionally, the get_trash_chunk() function now really returns two
different chunks. Previously it used to always overwrite the same
chunk and point it to a different buffer, which was a bit tricky
because it's not obvious that two consecutive results do alias each
other.
The dumpstats code looks like a spaghetti plate. Several functions are
supposed to be able to do several things but rely on complex states to
dispatch the work to independant functions. Most of the HTML output is
performed within the switch/case statements of the whole state machine.
Let's clean this up by adding new functions to emit the data and have
a few more iterators to avoid relying on so complex states.
The new stats dump sequence looks like this for CLI and for HTTP :
cli_io_handler()
-> stats_dump_sess_to_buffer() // "show sess"
-> stats_dump_errors_to_buffer() // "show errors"
-> stats_dump_raw_info_to_buffer() // "show info"
-> stats_dump_raw_info()
-> stats_dump_raw_stat_to_buffer() // "show stat"
-> stats_dump_csv_header()
-> stats_dump_proxy()
-> stats_dump_px_hdr()
-> stats_dump_fe_stats()
-> stats_dump_li_stats()
-> stats_dump_sv_stats()
-> stats_dump_be_stats()
-> stats_dump_px_end()
http_stats_io_handler()
-> stats_http_redir()
-> stats_dump_http() // also emits the HTTP headers
-> stats_dump_html_head() // emits the HTML headers
-> stats_dump_csv_header() // emits the CSV headers (same as above)
-> stats_dump_http_info() // note: ignores non-HTML output
-> stats_dump_proxy() // same as above
-> stats_dump_http_end() // emits HTML trailer
Using %[expression] it becomes possible to make the log engine fetch
some samples from the request or the response and provide them in the
logs. Note that this feature is still limited, it does not yet allow
to apply converters, to limit the output length, nor to specify the
direction which should be fetched when a fetch function works in both
directions.
However it's quite convenient to log SSL information or to include some
information that are used in stick tables.
It is worth noting that this has been done in the generic log format
handler, which means that the same information may be used to build the
unique-id header and to pass the information to a backend server.
The log-format parser reached a limit making it hard to add new features.
It also suffers from a weak handling of certain incorrect corner cases,
for example "%{foo}" is emitted as a litteral while syntactically it's an
argument to no variable. Also the argument parser had to redo some of the
job with some cases causing minor memory leaks (eg: ignored args).
This work aims at improving the situation so that slightly better reporting
is possible and that it becomes possible to extend the log format. The code
has a few more states but looks significantly simpler. The parser is now
capable of reporting ignored arguments and truncated lines.
stream_int_chk_rcv_conn() did not clear connection flags before updating them. It
is unsure whether this could have caused the stalled transfers that have been
reported since dev15.
In order to avoid such further issues, we now use a simple inline function to do
all the job.
Looking at the assembly code that updt_fd() and alloc/release_spec_entry
produce in the polling loops, it's clear that gcc has to recompute pointers
several times in a row because of limited spare registers. By better
grouping adjacent structure updates, we improve the code size by around
60 bytes in the fast path on x86.
The stick counters were in two distinct sets of struct members,
causing some code to be duplicated. Now we use an array, which
enables some processing to be performed in loops. This allowed
the code to be shrunk by 700 bytes.
