Using some Linux kernel patches, it is possible to redirect non-local
traffic to local sockets when IP forwarding is enabled. In order to
enable this option, we introduce the "transparent" option keyword on
the "bind" command line. It will make the socket reachable by remote
sources even if the destination address does not belong to the machine.
This patch adds a possibility to invert most of available options by
introducing the "no" keyword, available as an additional prefix.
If it is found arguments are shifted left and an additional flag (inv)
is set.
It allows to use all options from a current defaults section, except
the selected ones, for example:
-- cut here --
defaults
contimeout 4200
clitimeout 50000
srvtimeout 40000
option contstats
listen stats 1.2.3.4:80
no option contstats
-- cut here --
Currenly inversion works only with the "option" keyword.
The patch also moves last_checks calculation at the end of the readcfgfile()
function and changes "PR_O_FORCE_CLO | PR_O_HTTP_CLOSE" into "PR_O_FORCE_CLO"
in cfg_opts so it is possible to invert forceclose without breaking httpclose
(and vice versa) and to invert tcpsplice in one proxy but to keep a proper
last_checks value when tcpsplice is used in another proxy. Now, the code
checks for PR_O_FORCE_CLO everywhere it checks for PR_O_HTTP_CLOSE.
I also decided to depreciate "redisp" and "redispatch" keywords as it is IMHO
better to use "option redispatch" which can be inverted.
Some useful documentation were added and at the same time I sorted
(alfabetically) all valid options both in the code and the documentation.
The code in haproxy-1.3.13.1 only supports syslogging to an internet
address. The attached patch:
- Adds support for syslogging to a UNIX domain socket (e.g., /dev/log).
If the address field begins with '/' (absolute file path), then
AF_UNIX is used to construct the socket. Otherwise, AF_INET is used.
- Achieves clean single-source build on both Mac OS X and Linux
(sockaddr_in.sin_len and sockaddr_un.sun_len field aren't always present).
For handling sendto() failures in send_log(), it appears that the existing
code is fine (no need to close/recreate socket) for both UDP and UNIX-domain
syslog server. So I left things alone (did not close/recreate socket).
Closing/recreating socket after each failure would also work, but would lead
to increased amount of unnecessary socket creation/destruction if syslog is
temporarily unavailable for some reason (especially for verbose loggers).
Please consider this patch for inclusion into the upstream haproxy codebase.
This new function accepts inputs in various default units, from
the microsecond to the day. It detects suffixes after numbers
and performs the appropriate conversions between the user's unit
and the program's unit, considering a unit-less number in the
default unit.
In order to avoid issues in the future, we want to restrict
the set of allowed characters for identifiers. Starting from
now, only A-Z, a-z, 0-9, '-', '_', '.' and ':' will be allowed
for a proxy, a server or an ACL name.
A test file has been added to check the restriction.
AIX does not know about MSG_DONTWAIT. Fortunately, nearly all sockets
are already set to O_NONBLOCK, so it's not even required to change the
code. It was only necessary to add this fcntl to the log socket which
lacked it. The MSG_DONTWAIT value has been defined to zero when unset
in order to make the code cleaner and more portable.
Also, on AIX, "hz" is defined, which causes a problem with one function
parameter in time.c. It's enough to rename the parameter there. Last,
fix a missing #include <string.h> in proxy.c.
Hello,
You will find attached an updated release of previously submitted patch.
It polish some part and extend ACL engine to match IP and PORT parsed in
HTTP request. (and take care of comments made by Willy ! ;))
Best regards,
Alexandre
Currently, there is a hidden line length limit in the haproxy, set
to 256-1 chars. With large acls (for example many hdr(host) matches)
it may be not enough and which is even worse, error message may
be totally confusing as everything above this limit is treated
as a next line:
echo -ne "frontend aqq 1.2.3.4:80\nmode http\nacl e hdr(host) -i X X X X X X X www.xx.example.com stats\n"|
sed s/X/www.some-host-name.example.com/g > ha.cfg && haproxy -c -f ./ha.cfg
[WARNING] 300/163906 (11342) : parsing [./ha.cfg:4] : 'stats' ignored because frontend 'aqq' has no backend capability.
Recently I hit simmilar problem and it took me a while to find why
requests for "stats" are not handled properly.
This patch:
- makes the limit configurable (LINESIZE)
- increases default line length limit from 256 to 2048
- increases MAX_LINE_ARGS from 40 to 64
- fixes hidden assignment in fgets()
- moves arg/end/args/line inside the loop, making code auditing easier
- adds a check that shows error if the limit is reached
- changes "*line++ = 0;" to "*line++ = '\0';" (cosmetics)
With this patch, when LINESIZE is defined to 256, above example produces:
[ALERT] 300/164724 (27364) : parsing [/tmp/ha.cfg:3]: line too long, limit: 255.
[ALERT] 300/164724 (27364) : Error reading configuration file : /tmp/ha.cfg
Building ev_kqueue on OpenBSD causes some warnings to occur,
because OpenBSD also uses LIST_* macros in sys/queue.h, included
from sys/event.h. Simply undefine those macros since we don't
need them.
This is in fact the same as ultoa() except that it's possible to
pass the string to be returned in case the value is NULL. This is
useful to report limits in printf calls.
Current ultoa() function is limited to one use per expression or
function call. Sometimes this is limitating. Change this in favor
of an array of 10 return values and shorter macros U2A0..U2A9
which respectively call the function with the 10 different buffers.
localtime() was called with pointers to tv_sec, which is time_t on
some platforms and long on others. A problem was encountered on
Sparc64 under OpenBSD where tv_sec is long (64 bits) and time_t is
32 bits. Since this architecture is big-endian, it exhibited the
bug because localtime() always worked with the high part of the
value which is always zero. This problem was identified and debugged
by Thierry Fournier.
The correct solution is to pass the date by value and not by pointer,
through an intermediate function. The use of localtime_r() instead of
localtime() also made it possible to get rid of the first call to
localtime() since it does not need to allocate memory anymore.
The strl2ic() and strl2uic() primitives used to convert string to
integers could return 10 times the value read if they stopped on
non-digit because of a mis-placed loop exit.
Hello,
This patch implements new statistics for SLA calculation by adding new
field 'Dwntime' with total down time since restart (both HTTP/CSV) and
extending status field (HTTP) or inserting a new one (CSV) with time
showing how long each server/backend is in a current state. Additionaly,
down transations are also calculated and displayed for backends, so it is
possible to know how many times selected backend was down, generating "No
server is available to handle this request." error.
New information are presentetd in two different ways:
- for HTTP: a "human redable form", one of "100000d 23h", "23h 59m" or
"59m 59s"
- for CSV: seconds
I believe that seconds resolution is enough.
As there are more columns in the status page I decided to shrink some
names to make more space:
- Weight -> Wght
- Check -> Chk
- Down -> Dwn
Making described changes I also made some improvements and fixed some
small bugs:
- don't increment s->health above 's->rise + s->fall - 1'. Previously it
was incremented an then (re)set to 's->rise + s->fall - 1'.
- do not set server down if it is down already
- do not set server up if it is up already
- fix colspan in multiple places (mostly introduced by my previous patch)
- add missing "status" header to CSV
- fix order of retries/redispatches in server (CSV)
- s/Tthen/Then/
- s/server/backend/ in DATA_ST_PX_BE (dumpstats.c)
Changes from previous version:
- deal with negative time intervales
- don't relay on s->state (SRV_RUNNING)
- little reworked human_time + compacted format (no spaces). If needed it
can be used in the future for other purposes by optionally making "cnt"
as an argument
- leave set_server_down mostly unchanged
- only little reworked "process_chk: 9"
- additional fields in CSV are appended to the rigth
- fix "SEC" macro
- named arguments (human_time, be_downtime, srv_downtime)
Hope it is OK. If there are only cosmetic changes needed please fill free
to correct it, however if there are some bigger changes required I would
like to discuss it first or at last to know what exactly was changed
especially since I already put this patch into my production server. :)
Thank you,
Best regards,
Krzysztof Oledzki
For people who manage many haproxies, it is sometimes convenient
to be informed of their version. This patch adds this, with the
option to disable this report by specifying "stats hide-version".
Also, the feature may be permanently disabled by setting the
STATS_VERSION_STRING to "" (empty string), or the format can
simply be adjusted.
When one server in one backend has a very low check interval, it imposes
its value as the minimal interval, causing all other servers to start
their checks close to each other, thus partially voiding the benefits of
the spread checks.
The solution consists in ignoring intervals lower than a given value
(SRV_CHK_INTER_THRES = 1000 ms) when computing the minimal interval,
and then assigning them a start date relative to their own interval
and not the global one.
With this change, the checks distribution clearly looks better.
The version does not appear anymore in the Makefiles nor in
the include files. It was a nightmare to maintain. Now there
is a VERSION file which contains the major version, a VERDATE
file which contains the date for this version and a SUBVERS
file which may contain a sub-version.
A "make version" target has been added to all makefiles to
check the version. The GNU Makefile also has an update-version
target to update those files. This should never be used.
It is still possible to override those values by specifying
them in the equivalent make variables. By default, the GNU
makefile tries to detect a GIT repository and always uses the
version and date from the current repository. This can be
disabled by setting IGNOREGIT to a non-void value.
src/chtbl.c, src/hashpjw.c and src/list.c are distributed under
an obscure license. While Aleks and I believe that this license
is OK for haproxy, other people think it is not compatible with
the GPL.
Whether it is or not is not the problem. The fact that it rises
a doubt is sufficient for this problem to be addressed. Arnaud
Cornet rewrote the unclear parts with clean GPLv2 and LGPL code.
The hash algorithm has changed too and the code has been slightly
simplified in the process. A lot of care has been taken in order
to respect the original API as much as possible, including the
LGPL for the exportable parts.
The new code has not been thoroughly tested but it looks OK now.
Sometimes it may be desirable to automatically refresh the
stats page. Most browsers support the "Refresh:" header with
an interval in seconds. Specifying "stats refresh xxx" will
automatically add this header.
- acl: smarter integer comparison support in ACLs
- acl: specify the direction during fetches
- acl: provide the argument length for fetch functions
- acl: provide a reference to the expr to fetch()
- acl: implement matching on header values
- acl: support maching on 'path' component
- acl: permit to return any header when no name specified
- errorfile: use a local file to feed error messages
- negation in ACL conds was not cleared between terms
- fix segfault at exit when using captures
- improve memory freeing upon exit
- acl: support '-i' to ignore case when matching
- str2net() must not change the const char *
- provide default ACLs
- acl: distinguish between request and response headers
- added the 'use_backend' keyword for full content-switching
- acl: added the TRUE and FALSE ACLs.
- shut warnings 'is*' macros from ctype.h on solaris
- do not re-arm read timeout in SHUTR state
- optimize I/O by detecting system starvation
- the epoll FD must not be shared between processes
- limit the number of events returned by *poll*
By default, epoll/kqueue used to return as many events as possible.
This could sometimes cause huge latencies (latencies of up to 400 ms
have been observed with many thousands of fds at once). Limiting the
number of events returned also reduces the latency by avoiding too
many blind processing. The value is set to 200 by default and can be
changed in the global section using the tune.maxpollevents parameter.
- fixed ev_sepoll again by rewriting the state machine
- switched all timeouts to timevals instead of milliseconds
- improved memory management using mempools v2.
- several minor optimizations
When we're interrupted by another instance, it is very likely
that the other one will need some memory. Now we know how to
free what is not used, so let's do it.
Also only free non-null pointers. Previously, pool_destroy()
did implicitly check for this case which was incidentely
needed.
- keep the number of users of each pool
- call the garbage collector on out of memory conditions
- sort the pools by size for faster creation
- force the alignment size to 16 bytes instead of 4*sizeof(void *)
Also during this process, a bug was found in appsession_refresh().
It would not automatically requeue the task in the queue, so the
old sessions would not vanish.
The timeout functions were difficult to manipulate because they were
rounding results to the millisecond. Thus, it was difficult to compare
and to check what expired and what did not. Also, the comparison
functions were heavy with multiplies and divides by 1000. Now, all
timeouts are stored in timevals, reducing the number of operations
for updates and leading to cleaner and more efficient code.
- several fixes in ev_sepoll
- fixed some expiration dates on some tasks
- fixed a bug in connection establishment detection due to speculative I/O
- fixed rare bug occuring on TCP with early close (reported by Andy Smith)
- implemented URI hashing algorithm (Guillaume Dallaire)
- implemented SMTP health checks (Peter van Dijk)
- replaced the rbtree with ul2tree from old scheduler project
- new framework for generic ACL support
- added the 'acl' and 'block' keywords to the config language
- added several ACL criteria and matches (IP, port, URI, ...)
- cleaned up and better modularization for some time functions
- fixed list macros
- fixed useless memory allocation in str2net()
- store the original destination address in the session
Peter van Dijk contributed this patch which implements the "smtpchk"
option, which is to SMTP what "httpchk" is to HTTP. By default, it sends
"HELO localhost" to the servers, and waits for the 250 message, but it
can also send a specific request.
tv_cmp2_ms handles multiple combinations of tv1 and tv2, but only
one form is used: (tv1 <= tv2). So it is overkill to use it everywhere.
A new function designed to do exactly this has been written for that
purpose: tv_cmp2_le. Also, removed old unused tv_* functions.
The fact that TV_ETERNITY was 0 was very awkward because it
required that comparison functions handled the special case.
Now it is ~0 and all comparisons are performed on unsigned
values, so that it is naturally greater than any other value.
A performance gain of about 2-5% has been noticed.
- modularized the polling mechanisms and use function pointers instead
of macros at many places
- implemented support for FreeBSD's kqueue() polling mechanism
- fixed a warning on OpenBSD : MIN/MAX redefined
- change socket registration order at startup to accomodate kqueue.
- several makefile cleanups to support old shells
- fix build with limits.h once for all
- ev_epoll: do not rely on fd_sets anymore, use changes stacks instead.
- fdtab now holds the results of polling
- implemented support for speculative I/O processing with epoll()
- remove useless calls to shutdown(SHUT_RD), resulting in small speed boost
- auto-registering of pollers at load time
The pollers will now be able to speculatively call the I/O
processing functions and decide whether or not they want to
poll on those FDs. The changes primarily consist in teaching
those functions how to pass the info they got an EAGAIN.
Patch #cf83df3d162687d9c74783357421bd89f596eaac was stupid. Including
limits.h is portable and easier. At least it now builds on Solaris,
FreeBSD, Linux and OpenBSD.
FreeBSD stores INT_MIN and INT_MAX in sys/limits.h only. Other systems
(Solaris) have it in sys/types.h and do not have sys/limits.h. Let's
include sys/limits.h only if INT_MAX is not defined.
- rewriting either the status line or request line could crash the
process due to a pointer which ought to be reset before parsing.
- rewriting the status line in the response did not work, it caused
a 502 Bad Gateway due to an erroneous state during parsing
- fix reqadd when no option httpclose is used.
- removed now unused fiprm and beprm from proxies
- split logs into two versions : TCP and HTTP
- added some docs about http headers storage and acls
- added a VIM script for syntax color highlighting (Bruno Michel)
- fixed several bugs which might have caused a crash with bad configs
- several optimizations in header processing
- many progresses towards transaction-based processing
- option forwardfor may be used in frontends
- completed HTTP response processing
- some code refactoring between request and response processing
- new HTTP header manipulation functions
- optimizations on the recv() patch to reduce CPU usage under very
high data rates.
- more user-friendly help about the 'usesrc' keyword (CTTPROXY)
- username/groupname support from Marcus Rueckert
- added the "except" keyword to the "forwardfor" option (Bryan German)
- support for health-checks on other addresses (Fabrice Dulaunoy)
- makefile for MacOS 10.4 / Darwin (Dan Zinngrabe)
- do not insert "Connection: close" in HTTP/1.0 messages
Generally, if a recv() returns less bytes than the MSS, it means that
there is nothing left in the system's buffers, and that it's not worth
trying to read again because we are very likely to get nothing. A
default read low limit has been set to 1460 bytes below which we stop
reading.
This has brought a little speed boost on small objects while maintaining
the same speed on large objects.
Multiple read polling was temporarily disabled, which had the side
effect of burning huge amounts of CPU on large objects. It has now
been re-implemented with a limit of 8 calls per wake-up, which seems
to provide best results at least on Linux.
The new rbtree-based scheduler makes heavy use of tv_cmp2(), and
this function becomes a huge CPU eater. Refine it a little bit in
order to slightly reduce CPU usage.
- fix critical bug introduced with 1.3.6 : an empty request header
may lead to a crash due to missing pointer assignment
- hdr_idx might be left uninitialized in debug mode
- fixed build on FreeBSD due to missing fd_set declaration
Sorin Pop reported a patch to fix build on FreeBSD.
The file common/standard.h used an fd_set in a declaration
but did not include enough headers for it to be known.
- stats now support the HEAD method too
- extracted http request from the session
- huge rework of the HTTP parser which is now a 28-state FSM.
- linux-style likely/unlikely macros for optimization hints
- do not create a server socket when there's no server
- added complete support and doc for TCP Splicing
- replaced the wait-queue linked list with an rbtree.
- stats: swap color sets for active and backup servers
- try to guess server check port when unset
- a few bugfixes and cleanups
The stats page could not tell the difference between a FE and a BE.
It has been revamped to indicate all relevant information. The font
is also slightly smaller in order for all the info to fit into small
screens. The data output path has been greatly simplified to use
string chunks.
Sin Yu's patch to permit to change the proxy from a regex was merged
with little changes :
- req_cap/rsp_cap are not reassigned to the new proxy, they stay
attached to the frontend
- the actions have been renamed "reqsetbe" and "reqisetbe" for
"set BackEnd".
- the buffer is not reset after the switch, instead, the headers are
parsed again by the backend
- in Sin's patch, it was theorically possible to switch multiple times,
but the switching track was lost, making it impossible to apply
server responsesin the reverse order. Now switching is limited to
1 action (separation between frontend and backend) but the filters
remain.
Now it will be extremely easy to add other switching conditions, such
as host matching, URI matching, etc...
There's still a hard work to be done on the logs and stats.
This structure will consume 4 bytes per header to keep track of
headers within a request or a response without having to parse
the whole request for each regex. As it's not possible to allocate
only 4 bytes, we define a max number of HTTP headers. We set it
to (BUFSIZE+79)/80 so that 8kB buffers can contain 100 headers
(like Apache), resulting in 400 bytes dedicated to indexation,
or about 400/(2*8kB) ~= 2.4% of the memory usage.
SO_REUSEPORT does not exist on Linux but the checks are available in
the code. With a little patch, it's possible to implement the feature,
but the value of SO_REUSEPORT will still have to be known from userland.
This patch adds a workaround to this problem by figuring out the value
for the one used by SO_REUSEADDR.
Released 1.3.3 with the following changes :
- fix broken redispatch option in case the connection has already
been marked "in progress" (ie: nearly always).
- support regparm on x86 to speed up some often called functions
- removed a few useless calls to gettimeofday() in log functions.
- lots of 'const char*' cleanups
- turn every FD_* into functions which are faster on recent CPUs
- builds again on OpenBSD and Solaris
Some of the tv_* functions are called very often. Passing their
arguments as registers is quite faster. This can be disabled
by setting CONFIG_HAP_DISABLE_REGPARM.
As suggested by Markus Elfring, a few "const char *" have replaced
some "char *" declarations where a function is not expected to
modify a value. It does not change the code but it helps detecting
coding errors.
- started the changes towards I/O completion callbacks. stream_sock* have
replaced event_*.
- added the new "reqtarpit" and "reqitarpit" protection features
It is now possible to tarpit connections based on regex matches.
The tarpit timeout is equal to the contimeout. A 500 server error
response is faked, and the logs show the status flags as "PT" which
indicate the connection has been tarpitted.
Released 1.3.1 with the following changes from 1.2.15 :
- now, haproxy warns about missing timeout during startup to try to
eliminate all those buggy configurations.
- added "Content-Type: text/html" in responses wherever appropriate, as
suggested by Cameron Simpson.
- implemented "option ssl-hello-chk" to use SSLv3 CLIENT HELLO messages to
test server's health
- implemented "monitor-uri" so that haproxy can reply to a specific URI with
an "HTTP/1.0 200 OK" response. This is useful to validate multiple proxies
at once.
