We don't needa to lock the memory when there is a single process. This can
make a difference on small systems where locking is much more expensive than
just a test.
Add keyword 'verify' on bind:
'verify none': authentication disabled (default)
'verify optional': accept connection without certificate
and process a verify if the client sent a certificate
'verify required': reject connection without certificate
and process a verify if the client send a certificate
Add keyword 'cafile' on bind:
'cafile <path>' path to a client CA file used to verify.
'crlfile <path>' path to a client CRL file used to verify.
Check the protocol pointer and not the socket to report an unknown family
in servers or peers. This can never happen anyway, it's just to be completely
clean.
It's better to set all listeners to ssl_sock when seeing the "ssl"
keyword that to loop on all of them afterwards just for this. This
also removes some #ifdefs.
Unix permissions are per-bind configuration line and not per listener,
so let's concretize this in the way the config is stored. This avoids
some unneeded loops to set permissions on all listeners.
The access level is not part of the unix perms so it has been moved
away. Once we can use str2listener() to set all listener addresses,
we'll have a bind keyword parser for this one.
Navigating through listeners was very inconvenient and error-prone. Not to
mention that listeners were linked in reverse order and reverted afterwards.
In order to definitely get rid of these issues, we now do the following :
- frontends have a dual-linked list of bind_conf
- frontends have a dual-linked list of listeners
- bind_conf have a dual-linked list of listeners
- listeners have a pointer to their bind_conf
This way we can now navigate from anywhere to anywhere and always find the
proper bind_conf for a given listener, as well as find the list of listeners
for a current bind_conf.
Otherwise we would risk a segfault when checking the config's validity
(eg: when looking for conflicts on ID assignments).
Note that the same issue exists with peers_fe and the global stats_fe. All
listeners should be reviewed and simplified to use a compatible declaration
mode.
When an unknown "bind" keyword is detected, dump the list of all
registered keywords. Unsupported default alternatives are also reported
as "not supported".
The "mode", "uid", "gid", "user" and "group" bind options were moved to
proto_uxst as they are unix-specific.
Note that previous versions had a bug here, only the last listener was
updated with the specified settings. However, it almost never happens
that bind lines contain multiple UNIX socket paths so this is not that
much of a problem anyway.
Registering new SSL bind keywords was not particularly handy as it required
many #ifdef in cfgparse.c. Now the code has moved to ssl_sock.c which calls
a register function for all the keywords.
Error reporting was also improved by this move, because the called functions
build an error message using memprintf(), which can span multiple lines if
needed, and each of these errors will be displayed indented in the context of
the bind line being processed. This is important when dealing with certificate
directories which can report multiple errors.
Now proto_tcp.c is responsible for the 4 settings it handles :
- defer-accept
- interface
- mss
- transparent
These ones do not need to be handled in cfgparse anymore. If support for a
setting is disabled by a missing build option, then cfgparse correctly
reports :
[ALERT] 255/232700 (2701) : parsing [echo.cfg:114] : 'bind' : 'transparent' option is not implemented in this version (check build options).
With the arrival of SSL, the "bind" keyword has received even more options,
all of which are processed in cfgparse in a cumbersome way. So it's time to
let modules register their own bind options. This is done very similarly to
the ACLs with a small difference in that we make the difference between an
unknown option and a known, unimplemented option.
Some settings need to be merged per-bind config line and are not necessarily
SSL-specific. It becomes quite inconvenient to have this ssl_conf SSL-specific,
so let's replace it with something more generic.
A side effect of this change is that the "ssl" keyword on "bind" lines is now
just a boolean and that "crt" is needed to designate certificate files or
directories.
Note that much refcounting was needed to have the free() work correctly due to
the number of cert aliases which can make a context be shared by multiple names.
SSL config holds many parameters which are per bind line and not per
listener. Let's use a per-bind line config instead of having it
replicated for each listener.
At the moment we only do this for the SSL part but this should probably
evolved to handle more of the configuration and maybe even the state per
bind line.
This is very convenient to reduce SSL processing priority compared to
other traffic. This applies to CPU usage only, but has a direct impact
on latency under congestion.
SSL connections take a huge amount of memory, and unfortunately openssl
does not check malloc() returns and easily segfaults when too many
connections are used.
The only solution against this is to provide a global maxsslconn setting
to reject SSL connections above the limit in order to avoid reaching
unsafe limits.
With SSL, connections are much more expensive, so it is important to be
able to limit concurrent connections per listener in order to limit the
memory usage.
I wrote a small path to add the SSL_OP_CIPHER_SERVER_PREFERENCE OpenSSL option
to frontend, if the 'prefer-server-ciphers' keyword is set.
Example :
bind 10.11.12.13 ssl /etc/haproxy/ssl/cert.pem ciphers RC4:HIGH:!aNULL:!MD5 prefer-server-ciphers
This option mitigate the effect of the BEAST Attack (as I understand), and it
equivalent to :
- Apache HTTPd SSLHonorCipherOrder option.
- Nginx ssl_prefer_server_ciphers option.
[WT: added a test for the support of the option]
This is aimed at disabling SSLv3 and TLSv1 respectively. SSLv2 is always
disabled. This can be used in some situations where one version looks more
suitable than the other.
Since the SSL handshake involves an immediate reply from the server
to the client, there's no point responding with a quick-ack before
sending the data, so disable quick-ack by default, just as it is done
for HTTP.
This shows a 2-2.5% transaction rate increase on a dual-core atom.
CVE-2009-3555 suggests that client-initiated renegociation should be
prevented in the middle of data. The workaround here consists in having
the SSL layer notify our callback about a handshake occurring, which in
turn causes the connection to be marked in the error state if it was
already considered established (which means if a previous handshake was
completed). The result is that the connection with the client is immediately
aborted and any pending data are dropped.
This option currently takes no option and simply turns SSL on for all
connections going to the server. It is likely that more options will
be needed in the future.
The PROXY protocol is now decoded in the connection before other
handshakes. This means that it may be extracted from a TCP stream
before SSL is decoded from this stream.
Some parts of the sock_ops structure were only used by the stream
interface and have been moved into si_ops. Some of them were callbacks
to the stream interface from the connection and have been moved into
app_cp as they're the application seen from the connection (later,
health-checks will need to use them). The rest has moved to data_ops.
Normally at this point the connection could live without knowing about
stream interfaces at all.
The "raw_sock" prefix will be more convenient for naming functions as
it will be prefixed with the data layer and suffixed with the data
direction. So let's rename the files now to avoid any further confusion.
The #include directive was also removed from a number of files which do
not need it anymore.
The correct spelling is "independent", not "independant". This patch
fixes the doc and the configuration parser to accept the correct form.
The config parser still allows the old naming for backwards compatibility.
This implements the feature discussed in the earlier thread of killing
connections on backup servers when a non-backup server comes back up. For
example, you can use this to route to a mysql master & slave and ensure
clients don't stay on the slave after the master goes from down->up. I've done
some minimal testing and it seems to work.
[WT: added session flag & doc, moved the killing after logging the server UP,
and ensured that the new server is really usable]
httponly This option tells haproxy to add an "HttpOnly" cookie attribute
when a cookie is inserted. This attribute is used so that a
user agent doesn't share the cookie with non-HTTP components.
Please check RFC6265 for more information on this attribute.
secure This option tells haproxy to add a "Secure" cookie attribute when
a cookie is inserted. This attribute is used so that a user agent
never emits this cookie over non-secure channels, which means
that a cookie learned with this flag will be presented only over
SSL/TLS connections. Please check RFC6265 for more information on
this attribute.
This one was already taken care of in proxy_cfg_ensure_no_http(), so if a
cookie is presented in a TCP backend, we got two warnings.
This can be backported to 1.4 since it's been this way for 2 years (although not dramatic).
Cookies were mixed with many other options while they're not used as options.
Move them to a dedicated bitmask (ck_opts). This has released 7 flags in the
proxy options and leaves some room for new proxy flags.
Option httplog needs to be checked only once the proxy has been validated,
so that its final mode (tcp/http) can be used. Also we need to check for
httplog before checking the log format, so that we can report a warning
about this specific option and not about the format it implies.
The listener struct is now aware of the socket layer to use upon accept().
At the moment, only sock_raw is supported so this patch should not change
anything.
Before it was possible to resize the buffers using global.tune.bufsize,
the trash has always been the size of a buffer by design. Unfortunately,
the recent buffer sizing at runtime forgot to adjust the trash, resulting
in it being too short for content rewriting if buffers were enlarged from
the default value.
The bug was encountered in 1.4 so the fix must be backported there.
Tunnel timeouts are used when TCP connections are forwarded, or
when forwarding upgraded HTTP connections (WebSocket) as well as
CONNECT requests to proxies.
This timeout allows long-lived sessions to be supported without
having to set large timeouts to normal requests.
Instead of hard-coding sock_raw in connect_server(), we set this socket
operation at config parsing time. Right now, only servers and peers have
it. Proxies are still hard-coded as sock_raw. This will be needed for
future work on SSL which requires a different socket layer.
All keywords registered using a cfg_kw_list now make use of the new error reporting
framework. This allows easier and more precise error reporting without having to
deal with complex buffer allocation issues.
This is mainly a massive renaming in the code to get it in line with the
calling convention. Next patch will rename a few files to complete this
operation.
All parsing errors were known but impossible to return. Now by making use
of memprintf(), we're able to build meaningful error messages that the
caller can display.
Patterns were using a bitmask to indicate if request or response was desired
in fetch functions and keywords. ACLs were using a bitmask in fetch keywords
and a single bit in fetch functions. ACLs were also using an ACL_PARTIAL bit
in fetch functions indicating that a non-final fetch was performed, which was
an abuse of the existing direction flag.
The change now consists in using :
- a capabilities field for fetch keywords => SMP_CAP_REQ/RES to indicate
if a keyword supports requests, responses, both, etc...
- an option field for fetch functions to indicate what the caller expects
(request/response, final/non-final)
The ACL_PARTIAL bit was reversed to get SMP_OPT_FINAL as it's more explicit
to know we're working on a final buffer than on a non-final one.
ACL_DIR_* were removed, as well as PATTERN_FETCH_*. L4 fetches were improved
to support being called on responses too since they're still available.
The <dir> field of all fetch functions was changed to <opt> which is now
unsigned.
The patch is large but mostly made of cosmetic changes to accomodate this, as
almost no logic change happened.
The Unique ID, is an ID generated with several informations. You can use
a log-format string to customize it, with the "unique-id-format" keyword,
and insert it in the request header, with the "unique-id-header" keyword.
* logformat functions now take a format linked list as argument
* build_logline() build a logline using a format linked list
* rename LOG_* by LOG_FMT_* in enum
* improve error management in build_logline()
Sometimes it is desirable to forward a particular request to a specific
server without having to declare a dedicated backend for this server. This
can be achieved using the "use-server" rules. These rules are evaluated after
the "redirect" rules and before evaluating cookies, and they have precedence
on them. There may be as many "use-server" rules as desired. All of these
rules are evaluated in their declaration order, and the first one which
matches will assign the server.
Merge http_sess_log() and tcp_sess_log() to sess_log() and move it to
log.c
A new field in logformat_type define if you can use a logformat
variable in TCP or HTTP mode.
doc: log-format in tcp mode
Note that due to the way log buffer allocation currently works, trying to
log an HTTP request without "option httplog" is still not possible. This
will change in the near future.
The principle behind this load balancing algorithm was first imagined
and modeled by Steen Larsen then iteratively refined through several
work sessions until it would totally address its original goal.
The purpose of this algorithm is to always use the smallest number of
servers so that extra servers can be powered off during non-intensive
hours. Additional tools may be used to do that work, possibly by
locally monitoring the servers' activity.
The first server with available connection slots receives the connection.
The servers are choosen from the lowest numeric identifier to the highest
(see server parameter "id"), which defaults to the server's position in
the farm. Once a server reaches its maxconn value, the next server is used.
It does not make sense to use this algorithm without setting maxconn. Note
that it can however make sense to use minconn so that servers are not used
at full load before starting new servers, and so that introduction of new
servers requires a progressively increasing load (the number of servers
would more or less follow the square root of the load until maxconn is
reached). This algorithm ignores the server weight, and is more beneficial
to long sessions such as RDP or IMAP than HTTP, though it can be useful
there too.
parse_logformat_string: parse the string, detect the type: text,
separator or variable
parse_logformat_var: dectect variable name
parse_logformat_var_args: parse arguments and flags
add_to_logformat_list: add to the logformat linked list
When checking a configuration file using "-c -f xxx", sometimes it is
reported that a config is valid while it will later fail (eg: no enabled
listener). Instead, let's improve the return values :
- return 0 if config is 100% OK
- return 1 if config has errors
- return 2 if config is OK but no listener nor peer is enabled
If the local host is not found as a peer in a "peers" section, we have a
double free, and possibly a use-after-free because the peers section is
freed since it's aliased as the table's name.
In a config where server "s1" is marked disabled and "s2" tracks "s1",
s2 appears disabled on the stats but is still inserted into the LB farm
because the tracking is resolved too late in the configuration process.
We now resolve tracked servers before building LB maps and we also mark
the tracking server in maintenance mode, which previously was not done,
causing half of the issue.
Last point is that we also protect srv_is_usable() against electing a
server marked for maintenance. This is not absolutely needed but is a
safe choice and makes a lot of sense.
This fix must be backported to 1.4.
New option "http-send-name-header" specifies the name of a header which
will hold the server name in outgoing requests. This is the name of the
server the connection is really sent to, which means that upon redispatches,
the header's value is updated so that it always matches the server's name.
This patch settles the 2 loggers limitation.
Loggers are now stored in linked lists.
Using "global log", the global loggers list content is added at the end
of the current proxy list. Each "log" entries are added at the end of
the proxy list.
"no log" flush a logger list.
Up to now, if a cookie value was specified on a server when the proxy was
in TCP mode, it would cause a fatal error. Now we only report a warning,
since the cookie will be ignored. This makes it easier to generate configs
from scripts.
When reading the code, the "tracked" member of a server makes one
think the server is tracked while it's the opposite, it's a pointer
to the server being tracked. This is particularly true in constructs
such as :
if (srv->tracked) {
Since it's the second time I get caught misunderstanding it, let's
rename it to "track" to avoid the confusion.
Baptiste Assmann reported that a config where a non-existing peers
section is referenced by a stick-table causes a segfault after displaying
the error. This is caused by the freeing of the peers. Setting it to NULL
after displaying the error fixes the issue.
For a long time, the max number of headers was taken as a part of the buffer
size. Since the header size can be configured at runtime, it does not make
much sense anymore.
Nothing was making it necessary to have a static value, so let's turn this into
a tunable with a default value of 101 which equals what was previously used.
It makes no sense to have one pointer to the hdr_idx pool in each proxy
struct since these pools do not depend on the proxy. Let's have a common
pool instead as it is already the case for other types.
By default, pipes are the default size for the system. But sometimes when
using TCP splicing, it can improve performance to increase pipe sizes,
especially if it is suspected that pipes are not filled and that many
calls to splice() are performed. This has an impact on the kernel's
memory footprint, so this must not be changed if impacts are not understood.
If a peers section has no peer named as the local peer, we must destroy
it, otherwise a NULL peer frontend remains in the lists and a segfault
can happen upon a soft restart.
We also now report the missing peer name in order to help troubleshooting.
Peers' frontends must have logging disabled by default, which was not
the case, so logs were randomly emitted upon restart, sometimes causing
a new process to fail to replace the old one.
This made sense a long time ago but since the maxconn is dynamically
computed from the tracking tables, it does not make any sense anymore
and will harm future changes.
This one enforces a per-process connection rate limit, regardless of what
may be set per frontend. It can be a way to limit the CPU usage of a process
being severely attacked.
The side effect is that the global process connection rate is now measured
for each incoming connection, so it will be possible to report it.
If "option forwardfor" has the "if-none" argument, then the header is
only added when the request did not already have one. This option has
security implications, and should not be set blindly.
Manoj Kumar reported a case where haproxy would crash upon start-up. The
cause was an "http-check expect" statement declared in the defaults section,
which caused a NULL regex to be used during the check. This statement is not
allowed in defaults sections precisely because this requires saving a copy
of the regex in the default proxy. But the check was not made to prevent it
from being declared there, hence the issue.
Instead of adding code to detect its abnormal use, we decided to implement
it. It was not that much complex because the expect_str part was not used
with regexes, so it could hold the string form of the regex in order to
compile it again for every backend (there's no way to clone regexes).
This patch has been tested and works. So it's both a bugfix and a minor
feature enhancement.
It should be backported to 1.4 though it's not critical since the config
was not supposed to be supported.
Adding health checks has become a real pain, with cross-references to all
checks everywhere because they're all a single bit. Since they're all
exclusive, let's change this to have a check number only. We reserve 4
bits allowing up to 16 checks (15+tcp), only 7 of which are currently
used. The code has shrunk by almost 1kB and we saved a few option bits.
The "dispatch" option has been moved to px->options, making a few tests
a bit cleaner.
This patch provides a new "option redis-check" statement to enable server health checks based on redis PING request (http://www.redis.io/commands/ping).
This was revealed with one of the very latest patches which caused
the listener_queue not to be initialized on the stats socket frontend.
And in fact a number of other ones were missing too. This is getting so
boring that now we'll always make use of the same function to initialize
any proxy. Doing so has even saved about 500 bytes on the binary due to
the avoided code redundancy.
No backport is needed.
This function is finally not needed anymore, as it has been replaced with
a per-proxy task that is scheduled when some limits are encountered on
incoming connections or when the process is stopping. The savings should
be noticeable on configs with a large number of proxies. The most important
point is that the rate limiting is now enforced in a clean and solid way.
All listeners that are limited by a proxy-specific resource are now
queued at the proxy's and not globally. This allows finer-grained
wakeups when releasing resource.
Never add connections allocated to this sever to a stick-table.
This may be used in conjunction with backup to ensure that
stick-table persistence is disabled for backup servers.
This adds the "on-marked-down shutdown-sessions" statement on "server" lines,
which causes all sessions established on a server to be killed at once when
the server goes down. The task's priority is reniced to the highest value
(1024) so that servers holding many tasks don't cause a massive slowdown due
to the wakeup storm.
The motivation for this is to allow iteration of all the connections
of a server without the expense of iterating over the global list
of connections.
The first use of this will be to implement an option to close connections
associated with a server when is is marked as being down or in maintenance
mode.
mysqld >= 5.5 want the client to announce 4.1+ authentication support, even if we have no password, so we do this.
I also check on a debian potato mysqld 3.22 and it works too so i assume we are good from 3.22 to 5.5.
[WT: this must be backported to 1.4]
The fullconn value is not easy to get right when doing dynamic regulation,
as it should depend on the maxconns of the frontends that can reach a
backend. Since the parameter is mandatory, many configs are found with
an inappropriate default value.
Instead of rejecting configs without a fullconn value, we now set it to
10% of the sum of the configured maxconns of all the frontends which are
susceptible to branch to the backend. That way if new frontends are added,
the backend's fullconn automatically adjusts itself.
Since version 1.0.0, it's forbidden to have a cookie specified without at
least one server. This test is useless and makes it complex to write APIs
to iteratively generate working configurations. Remove the test.
There are some very rare server-to-server applications that abuse the HTTP
protocol and expect the payload phase to be highly interactive, with many
interleaved data chunks in both directions within a single request. This is
absolutely not supported by the HTTP specification and will not work across
most proxies or servers. When such applications attempt to do this through
haproxy, it works but they will experience high delays due to the network
optimizations which favor performance by instructing the system to wait for
enough data to be available in order to only send full packets. Typical
delays are around 200 ms per round trip. Note that this only happens with
abnormal uses. Normal uses such as CONNECT requests nor WebSockets are not
affected.
When "option http-no-delay" is present in either the frontend or the backend
used by a connection, all such optimizations will be disabled in order to
make the exchanges as fast as possible. Of course this offers no guarantee on
the functionality, as it may break at any other place. But if it works via
HAProxy, it will work as fast as possible. This option should never be used
by default, and should never be used at all unless such a buggy application
is discovered. The impact of using this option is an increase of bandwidth
usage and CPU usage, which may significantly lower performance in high
latency environments.
This change should be backported to 1.4 since the first report of such a
misuse was in 1.4. Next patch will also be needed.
It's always been a mess to debug wrong listening addresses because
the parsing function does not indicate the file and line number. Now
it does. Since the code was almost a duplicate of str2sa_range, it
now makes use of it and has been sensibly reduced.
The parser now distinguishes between pure addresses and address:port. This
is useful for some config items where only an address is required.
Raw IPv6 addresses are now parsed, but IPv6 host name resolution is still not
handled (gethostbyname does not resolve IPv6 names to addresses).
This option enables use of the PROXY protocol with the server, which
allows haproxy to transport original client's address across multiple
architecture layers.
And also rename "req_acl_rule" "http_req_rule". At the beginning that
was a bit confusing to me, especially the "req_acl" list which in fact
holds what we call rules. After some digging, it appeared that some
part of the code is 100% HTTP and not just related to authentication
anymore, so let's move that part to HTTP and keep the auth-only code
in auth.c.
This patch turns internal server addresses to sockaddr_storage to
store IPv6 addresses, and makes the connect() function use it. This
code already works but some caveats with getaddrinfo/gethostbyname
still need to be sorted out while the changes had to be merged at
this stage of internal architecture changes. So for now the config
parser will not emit an IPv6 address yet so that user experience
remains unchanged.
This change should have absolutely zero user-visible effect, otherwise
it's a bug introduced during the merge, that should be reported ASAP.
Since all of them are defined as proxy options, it's better to ensure
that at most one of them is enabled at once. The priority has been set
according to what is already performed in the backend :
1) dispatch
2) http_proxy
3) transparent
Till now we used the fact that the dispatch address was not null to use
the dispatch mode. This is very unconvenient, so let's have a dedicated
option.
We used to only count one socket instead of one per listener. This makes
the socket count wrong, preventing from automatically computing the proper
number of sockets to bind.
This fix must be backported to 1.4 and 1.3.
I have written a small patch to enable a correct PostgreSQL health check
It works similar to mysql-check with the very same parameters.
E.g.:
listen pgsql 127.0.0.1:5432
mode tcp
option pgsql-check user pgsql
server masterdb pgsql.server.com:5432 check inter 10000
One of the requirements we have is to run multiple instances of haproxy on a
single host; this is so that we can split the responsibilities (and change
permissions) between product teams. An issue we ran up against is how we
would distinguish between the logs generated by each instance. The solution
we came up with (please let me know if there is a better way) is to override
the application tag written to syslog. We can then configure syslog to write
these to different files.
I have attached a patch adding a global option 'log-tag' to override the
default syslog tag 'haproxy' (actually defaults to argv[0]).
By passing a negative value to the "mss" argument of "bind" lines, it
becomes possible to subtract this value to the MSS advertised by the
client, which results in segments smaller than advertised. The effect
is useful with some TCP stacks which ACK less often when segments are
not full, because they only ACK every other full segment as suggested
by RFC1122.
NOTE: currently this has no effect on Linux kernel 2.6, a kernel patch
is still required to change the MSS of established connections.
Haproxy does not include the hostname rather the IP of the machine in
the syslog headers it sends. Unfortunately this means that for each log
line rsyslog does a reverse dns on the client IP and in the case of
non-routable IPs one gets the public hostname not the internal one.
While this is valid according to RFC3164 as one might imagine this is
troublsome if you have some machines with public IPs, internal IPs, no
reverse DNS entries, etc and you want a standardized hostname based log
directory structure. The rfc says the preferred value is the hostname.
This patch adds a global "log-send-hostname" statement which accepts an
optional string to force the host name. If unset, the local host name
is used.
Using haproxy in multi-process mode (nbproc > 1), some features can be
not fully compatible or not work at all. haproxy will now display a warning on
startup for :
- appsession
- sticking rules
- stats / stats admin
- stats socket
- peers (fatal error in that case)
When the number of servers is a multiple of the size of the input set,
map-based hash can be inefficient. This typically happens with 64
servers when doing URI hashing. The "avalanche" hash-type applies an
avalanche hash before performing a map lookup in order to smooth the
distribution. The result is slightly less smooth than the map for small
numbers of servers, but still better than the consistent hashing.
Enhance pattern convs and fetch argument parsing, now fetchs and convs callbacks used typed args.
Add more details on error messages on parsing pattern expression function.
Update existing pattern convs and fetchs to new proto.
Create stick table key type "binary".
Manage Truncation and padding if pattern's fetch-converted result don't match table key size.
Some options depends on the target architecture or compilation options.
When such an option is used on a compiled version that doesn't support it,
it's probably better to identify it as an unsupported option due to
compilation options instead of an unknown option.
Edit: better check on the empty capability than on the option bits. -Willy
This option makes haproxy preserve any persistence cookie emitted by
the server, which allows the server to change it or to unset it, for
instance, after a logout request.
(cherry picked from commit 52e6d75374c7900c1fe691c5633b4ae029cae8d5)
When a backend defines a new cookie, it forgot to unset any params
that could have been set in a defaults section, resulting in configs
that would sometimes refuse to load or not work as expected.
(cherry picked from commit f80bf174ed905a29a3ed8ee91fcd528da6df174f)
The MySQL check has been revamped to be able to send real MySQL data,
and to avoid Aborted connects on MySQL side.
It is however backward compatible with older version, but it is highly
recommended to use the new mode, by adding "user <username>" on the
"mysql-check" line.
The new check consists in sending two MySQL packet, one Client
Authentication packet, with "haproxy" username (by default), and one
QUIT packet, to correctly close MySQL session. We then parse the Mysql
Handshake Initialisation packet and/or Error packet. It is a basic but
useful test which does not produce error nor aborted connect on the
server.
(cherry picked from commit a1e4dcfe5718311b7653d7dabfad65c005d0439b)
Health checks were all pure ASCII, but we're going to have to support some
binary checks (eg: SQL). When they're inherited from the default section,
they will be truncated to the first \0 due to strdup(). Let's fix that with
a simple malloc.
(cherry picked from commit 98fc04a766bcff80f57db2b1cd865c91761b131b)
Keywords were changed just before the commit but not in the help message.
Spotted by Hank A. Paulson.
(cherry picked from commit fdd46a0766dccec704aa1bd5acb0ac99a801c549)
The stats web interface must be read-only by default to prevent security
holes. As it is now allowed to enable/disable servers, a new keyword
"stats admin" is introduced to activate this admin level, conditioned by ACLs.
(cherry picked from commit 5334bab92ca7debe36df69983c19c21b6dc63f78)
Add two new arguments to the "cookie" keyword, to be able to
fix a max idle and max life on them. Right now only the parameter
parsing is implemented.
(cherry picked from commit 9ad5dec4c3bb8f29129f292cb22d3fc495fcc98a)
HTTP content-based health checks will be involved in searching text in pages.
Some pages may not fit in the default buffer (16kB) and sometimes it might be
desired to have larger buffers in order to find patterns. Running checks on
smaller URIs is always preferred of course.
(cherry picked from commit 043f44aeb835f3d0b57626c4276581a73600b6b1)
This patch adds the "http-check expect [r]{string,status}" statements
which enable health checks based on whether the response status or body
to an HTTP request contains a string or matches a regex.
This probably is one of the oldest patches that remained unmerged. Over
the time, several people have contributed to it, among which FinalBSD
(first and second implementations), Nick Chalk (port to 1.4), Anze
Skerlavaj (tests and fixes), Cyril Bonté (general fixes), and of course
myself for the final fixes and doc during integration.
Some people already use an old version of this patch which has several
issues, among which the inability to search for a plain string that is
not at the beginning of the data, and the inability to look for response
contents that are provided in a second and subsequent recv() calls. But
since some configs are already deployed, it was quite important to ensure
a 100% compatible behaviour on the working cases.
Thus, that patch fixes the issues while maintaining config compatibility
with already deployed versions.
(cherry picked from commit b507c43a3ce9a8e8e4b770e52e4edc20cba4c37f)
This patch provides a new "option ldap-check" statement to enable
server health checks based on LDAPv3 bind requests.
(cherry picked from commit b76b44c6fed8a7ba6f0f565dd72a9cb77aaeca7c)
This counter is incremented for each incoming connection and each active
listener, and is used to prevent haproxy from stopping upon SIGUSR1. It
will thus be possible for some tasks in increment this counter in order
to prevent haproxy from dying until they have completed their job.
The assumption that there was a 1:1 relation between tracked counters and
the frontend/backend role was wrong. It is perfectly possible to track the
track-fe-counters from the backend and the track-be-counters from the
frontend. Thus, in order to reduce confusion, let's remove this useless
{fe,be} reference and simply use {1,2} instead. The keywords have also been
renamed in order to limit confusion. The ACL rule action now becomes
"track-sc{1,2}". The ACLs are now "sc{1,2}_*" instead of "trk{fe,be}_*".
That means that we can reasonably document "sc1" and "sc2" (sticky counters
1 and 2) as sort of patterns that are available during the whole session's
life and use them just like any other pattern.
Doing so allows us to track counters from backends or depending on contents.
For instance, it now becomes possible to decide to track a connection based
on a Host header if enough time is granted to parse the HTTP request. It is
also possible to just track frontend counters in the frontend and unconditionally
track backend counters in the backend without having to write complex rules.
The first track-fe-counters rule executed is used to track counters for
the frontend, and the first track-be-counters rule executed is used to track
counters for the backend. Nothing prevents a frontend from setting a track-be
rule nor a backend from setting a track-fe rule. In fact these rules are
arbitrarily split between FE and BE with no dependencies.
Having a single tracking pointer for both frontend and backend counters
does not work. Instead let's have one for each. The keyword has changed
to "track-be-counters" and "track-fe-counters", and the ACL "trk_*"
changed to "trkfe_*" and "trkbe_*".
We're now able to return errors based on the validity of an argument
passed to a stick-table store data type. We also support ARG_T_DELAY
to pass delays to stored data types (eg: for rate counters).
Some data types will require arguments (eg: period for a rate counter).
This patch adds support for such arguments between parenthesis in the
"store" directive of the stick-table statement. Right now only integers
are supported.
This patch adds the ability to set a pointer in the session to an
entry in a stick table which holds various counters related to a
specific pattern.
Right now the syntax matches the target syntax and only the "src"
pattern can be specified, to track counters related to the session's
IPv4 source address. There is a special function to extract it and
convert it to a key. But the goal is to be able to later support as
many patterns as for the stick rules, and get rid of the specific
function.
The "track-counters" directive may only be set in a "tcp-request"
statement right now. Only the first one applies. Probably that later
we'll support multi-criteria tracking for a single session and that
we'll have to name tracking pointers.
No counter is updated right now, only the refcount is. Some subsequent
patches will have to bring that feature.
Sometimes it's necessary to be able to perform some "layer 6" analysis
in the backend. TCP request rules were not available till now, although
documented in the diagram. Enable them in backend now.
