This patch adds a reserve_finish callback that can be defined by the
subsystems that require a shared_context. It is called at the end of
shctx_row_reserve_hot after the shared_context lock is released.
Since a lock on the cache tree was added in the latest cache changes, we
do not need to use the shared_context's lock to lock more than pure
shared_context related data anymore. This already existing lock will now
only cover the 'avail' list from the shared_context. It can then be
changed to a rwlock instead of a spinlock because we might want to only
run through the avail list sometimes.
Apart form changing the type of the shctx lock, the main modification
introduced by this patch is to limit the amount of code covered by the
shctx lock. This lock does not need to cover any code strictly related
to the cache tree anymore.
The "hot" list stored in a shared_context was used to keep a reference
to shared blocks that were currently being used and were thus removed
from the available list (so that they don't get reused for another cache
response). This 'hot' list does not ever need to be shared across
threads since every one of them only works on their current row.
The main need behind this 'hot' list was to detach the corresponding
blocks from the 'avail' list and to have a known list root when calling
list_for_each_entry_from in shctx_row_data_append (for instance).
Since we actually never need to iterate over all members of the 'hot'
list, we can remove it and replace the inc_hot/dec_hot logic by a
detach/reattach one.
Every use of the cache tree was covered by the shctx lock even when no
operations were performed on the shared_context lists (avail and hot).
This patch adds a dedicated RW lock for the cache so that blocks of code
that work on the cache tree only can use this lock instead of the
superseding shctx one. This is useful for operations during which the
concerned blocks are already in the hot list.
When the two locks need to be taken at the same time, in
http_action_req_cache_use and in shctx_row_reserve_hot, the shctx one
must be taken first.
A new parameter needed to be added to the shared_context's free_block
callback prototype so that cache_free_block can take the cache lock and
release it afterwards.
Change the flags used for reversed connection :
* CO_FL_REVERSED is now put after reversal for passive connect. For
active connect, it is delayed when accept is completed after reversal.
* CO_FL_ACT_REVERSING replace the old CO_FL_REVERSED. It is put only for
active connect on reversal and removes once accept is done.
This allows to identify a connection as reversed during its whole
lifetime. This should be useful to extend reverse connect.
Make all the congestion support the maximum congestion control window
set by configuration. There is nothing special to explain. For each
each algo, each time the window is incremented it is also bounded.
Add a new ->max_cwnd member to bind_conf struct to store the maximum
congestion control window value for each QUIC binding.
Modify the "quic-cc-algo" keyword parsing to add an optional parameter
to its value: the maximum congestion window value between parentheses
as follows:
ex: quic-cc-algo cubic(10m)
This value must be bounded, greater than 10k and smaller than 1g.
This bug was introduced with 29b76ca ("BUG/MEDIUM: server/log: "mode log"
after server keyword causes crash ")
Indeed, we cannot safely rely on addr_proto being set when str2sa_range()
returns in parse_server() (even if SRV_PARSE_PARSE_ADDR is set), because
proto lookup might be bypassed when FQDN addresses are involved.
Unfortunately, the above patch wrongly assumed that proto would always
be set when SRV_PARSE_PARSE_ADDR was passed to parse_server() (so when
str2sa_range() was called), resulting in invalid postparsing checks being
performed, which could as well lead to crashes with log backends
("mode log" set) because some postparsing init was skipped as a result of
proto not being set and this wasn't expected later in the init code.
To fix this, we now make use of the previous patch to perform server's
address compatibility checks on hints that are always set when
str2sa_range() succesfully returns.
For log backend, we're also adding a complementary test to check if the
address family is of expected type, else we report an error, plus we're
moving the postinit logic in log api since _srv_check_proxy_mode() is
only meant to check proxy mode compatibility and we were abusing it.
This patch depends on:
- "MINOR: tools: make str2sa_range() directly return type hints"
No backport required unless 29b76ca gets backported.
str2sa_range() already allows the caller to provide <proto> in order to
get a pointer on the protocol matching with the string input thanks to
5fc9328a ("MINOR: tools: make str2sa_range() directly return the protocol")
However, as stated into the commit message, there is a trick:
"we can fail to return a protocol in case the caller
accepts an fqdn for use later. This is what servers do and in this
case it is valid to return no protocol"
In this case, we're unable to return protocol because the protocol lookup
depends on both the [proto type + xprt type] and the [family type] to be
known.
While family type might not be directly resolved when fqdn is involved
(because family type might be discovered using DNS queries), proto type
and xprt type are already known. As such, the caller might be interested
in knowing those address related hints even if the address family type is
not yet resolved and thus the matching protocol cannot be looked up.
Thus in this patch we add the optional net_addr_type (custom type)
argument to str2sa_range to enable the caller to check the protocol type
and transport type when the function succeeds.
It's common to see process_stream() being woken up by wake_expired_tasks
in the profiling output, without knowing which timeout was set to cause
this. By making it possible to record the call places of task_queue()
and task_schedule(), and by making wake_expired_tasks() explicitly not
replace it, we'll be able to know which task_queue() or task_schedule()
was triggered for a given wakeup.
For example below:
process_stream 51200 311.4ms 6.081us 34.59s 675.6us <- run_tasks_from_lists@src/task.c:659 task_queue
process_stream 19227 70.00ms 3.640us 9.813m 30.62ms <- sc_notify@src/stconn.c:1136 task_wakeup
process_stream 6414 102.3ms 15.95us 8.093m 75.70ms <- stream_new@src/stream.c:578 task_wakeup
It's visible that it's the run_tasks_from_lists() which in fact applies
on the task->expire returned by the ->process() function itself.
This is used for tracing and profiling. By permitting to have a NULL
caller, we allow a caller to explicitly pass zero to state that the
current caller must not be replaced. This will soon be used by
wake_expired_tasks() to avoid replacing a caller in the expire loop.
QUIC connections are pushed manually into a dedicated listener queue
when they are ready to be accepted. This happens after handshake
finalization or on 0-RTT packet reception. Listener is then woken up to
dequeue them with listener_accept().
This patch comptabilizes the number of connections currently stored in
the accept queue. If reaching a certain limit, INITIAL packets are
dropped on reception to prevent further QUIC connections allocation.
This should help to preserve system resources.
This limit is automatically derived from the listener backlog. Half of
its value is reserved for handshakes and the other half for accept
queues. By default, backlog is equal to maxconn which guarantee that
there can't be no more than maxconn connections in handshake or waiting
to be accepted.
Implement a limit per listener for concurrent number of QUIC
connections. When reached, INITIAL packets for new connections are
automatically dropped until the number of handshakes is reduced.
The limit value is automatically based on listener backlog, which itself
defaults to maxconn.
This feature is important to ensure CPU and memory resources are not
consume if too many handshakes attempt are started in parallel.
Special care is taken if a connection is released before handshake
completion. In this case, counter must be decremented. This forces to
ensure that member <qc.state> is set early in qc_new_conn() before any
quic_conn_release() invocation.
Accounting is implemented for half open connections which represent QUIC
connections waiting for handshake completion. When reaching a certain
limit, Retry mechanism is automatically activated prior to instantiate
new connections.
The issue with this behavior is that two notions are mixed : QUIC
connection handshake phase and Retry which is mechanism against
amplification attacks. As such, only peer address validation should be
taken into account to activate Retry protection.
This patch chooses to reduce the scope of half_open_conn. Now only
connection waiting to validate the peer address are now accounted for.
Most notably, connections instantiated with a validated Retry token
check are not accounted.
One impact of this patch is that it should prevent to activate Retry
mechanism too early, in particular in case if multiple handshakes are
too slow. Another limitation should be implemented to protect against
this scenario.
When a new QUIC connection is created, server considers peer address as
not yet validated. The server must limit its sending up to 3 times the
content already received. This is a defensive measure to avoid flooding
a remote host victim of address spoofing.
This patch adjust the condition to consider the peer address as
validated. Two conditions are now considered :
* successful handling of a received HANDSHAKE packet. This was already
done before although implemented in a different way.
* validation of a Retry token. This was not considered prior this patch
despite RFC recommandation.
This patch also adjusts how a connection is internally labelled as using
a validated peer address. Before, above conditions were checked via
quic_peer_validated_addr(). Now, a flag QUIC_FL_CONN_PEER_VALIDATED_ADDR
is set to labelled this. It already existed prior this patch but was
only used for quic_cc_conn. This should now be more explicit.
This bug could be reproduced with -dMfail option and detected by libasan.
During the TLS secrets allocations, when failed, quic_tls_ctx_secs_free()
is called. It resets the already initialized secrets. Some were detected
as initialized when not, or with a non initialized length, which leads
to big "memset(0)" detected by libsasan.
Ensure that all the secrets are really initialized with correct lengths.
No need to be backported.
This was no reason not to release as soon as possible the TLS/SSL QUIC connection
context from quic_conn_release() before allocating a "closing connection" connection
(quic_cc_conn struct).
This patch sets the handshake task in heavy task mode when receiving in disorder
CRYPTO data which results in in order bufferized CRYPTO data. This is done
thanks to a non-contiguous buffer and from qc_handle_crypto_frm() after having
potentially bufferized CRYPTO data in this buffer.
qc_treat_rx_crypto_frms() is no more called from qc_treat_rx_pkts() but instead
this is where the task is set in heavy task mode. Consequently,
this is the job of qc_ssl_provide_all_quic_data() to call directly
qc_treat_rx_crypto_frms() to provide the in order bufferized CRYPTO data to the
TLS stack. As this function releases the non-contiguous buffer for the CRYPTO
data, if possible, there is no need to do that from qc_treat_rx_crypto_frms()
anymore.
Add a new pool for the CRYPTO data frames received in order.
Add ->rx.crypto_frms list to each encryption level to store such frames
when they are received in order from qc_handle_crypto_frm().
Also set the handshake task (qc_conn_io_cb()) in heavy task mode from
this function after having received such frames. When this task
detects that it is set in heavy mode, it calls qc_ssl_provide_all_quic_data()
newly implemented function to provide the CRYPTO data to the TLS task.
Modify quic_conn_enc_level_uninit() to release these CRYPTO frames
when releasing the encryption level they are in relation with.
IOBUF_FL_EOI iobuf flag is now set by the producer to notify the consumer
that the end of input was reached. Thanks to this flag, we can remove the
ugly ack in h2_done_ff() to test the opposite SE flags.
Of course, for now, it works and it is good enough. But we must keep in mind
that EOI is always forwarded from the producer side to the consumer side in
this case. But if this change, a new CO_RFL_ flag will have to be added to
instruct the producer if it can forward EOI or not.
In the mux-to-mux data forwarding, we now try, as far as possible to send at
least a buffer. Of course, if the consumer side is congested or if nothing
more can be received, we leave. But the idea is to retry to fast-forward
data if less than a buffer was forwarded. It is only performed for buffer
fast-forwarding, not splicing.
The idea behind this patch is to optimise the forwarding, when a first
forward was performed to complete a buffer with some existing data. In this
case, the amount of data forwarded is artificially limited because we are
using a non-empty buffer. But without this limitation, it is highly probable
that a full buffer could have been sent. And indeed, with H2 client, a
significant improvement was observed during our test.
To do so, .done_fastfwd() callback function must be able to deal with
interim forwards. Especially for the H2 mux, to remove H2_SF_NOTIFIED flags
on the H2S on the last call only. Otherwise, the H2 stream can be blocked by
itself because it is in the send_list. IOBUF_FL_INTERIM_FF iobuf flag is
used to notify the consumer it is not the last call. This flag is then
removed on the last call.
In 2.6-dev1, the method used to decide how many pool entries could be
released at once was revisited to support releases in batches. This was
done with commits 91a8e28f9 ("MINOR: pool: add a function to estimate
how many may be released at once") and 361e31e3f ("MEDIUM: pool: compute
the number of evictable entries once per pool").
The first commit takes care of the possible inconsistency between the
moment the allocated count and the used count are read, but unfortunately
fixed it the wrong way, by adjusting "used" to match "alloc" whenever it
was lower (i.e. almost always). This results in a nasty case which is that
as soon as the allocated value becomes higher than the estimated count of
needed entries, we end up returning pool->minavail, which causes very
small batches to be released, starting from commit 1513c5479 ("MEDIUM:
pools: release cached objects in batches").
The problem was further amplified in 2.9-dev3 with commit 7bf829ace
("MAJOR: pools: move the shared pool's free_list over multiple buckets")
because it now becomes possible for a thread to allocate from one bucket
and release into a few other different ones, causing an accumulation of
entries in that bucket.
The fix is trivial, simply adjust the alloc counter if the used one is
higher, before performing operations.
This must be backported to 2.6.
QUIC connections are accounted inside global sslconns. As with QUIC
actconn, it suffered from a similar issue if an intermediary allocation
failed inside qc_new_conn().
Fix this similarly by moving increment operation inside qc_new_conn().
Increment and error path are now centralized and much easier to
validate.
The consequences are similar to the actconn fix : on memory allocation
global sslconns may wrap, this time blocking any future QUIC or SSL
connections on the process.
This must be backported up to 2.6.
Recent fixes have shown <lra> and <fsb> uses were not prettu clear. So let's
try to improve documentation about these value. Especially when <lra> is
updated and how to used it.
In sc_need_room(), we compute the maximum room that can be requested to
restarted reading to be sure to be able to unblock the SC. At worst when the
buffer is emptied. Here, the buffer reserve is considered but it is an issue.
Counting the reserve can lead to a wicked bug with the H1 multiplexer, when
small amount of data are found at the end of the HTX buffer. In this case,
to not wrap, the H1 mux requests more room. It is an optim to be able to
resync the buffer with the consumer side and to be able to perform zero-copy
transfers. However, if this amount of data is smaller than the reserve and
if the consumer is congested, we fall in a loop because the wrong value is
used to request more room. The H1 mux continues to pretend there is not
enough space in the buffer, while the effective requested value is lower
than the free space in the buffer. While the consumer is congested and does
not consume these data, the is no way to stop the loop.
We can fix the function by removing the buffer reserve from the
computation. But it remains a dangerous decision to apply a max value on
room_needed. It is safer to require the caller must set a correct value. For
now, it is true. But at the end, it is totally unexepected to wait for more
room than an empty buffer can contain.
This patch must be backported to 2.8.
When receive or send expiration date of a stream-connector is retrieved, we
now automatically check if it may expire. If not, TICK_ETERNITY is returned.
The expiration dates of the frontend and backend stream-connectors are used
to compute the stream expiration date. This operation is performed at 2
places: at the end of process_stream() and in sc_notify() if the stream is
not woken up.
With this patch, there is no special changes for process_stream() because it
was already handled. It make thing a little simpler. However, it fixes
sc_notify() by avoiding to erroneously compute an expiration date in
past. This highly reduce the stream wakeups when there is contention on the
consumer side.
The bug was introduced with the commit 8073094bf ("NUG/MEDIUM: stconn:
Always update stream's expiration date after I/O"). It was an error to
unconditionnaly set the stream expiration data, without testing blocking
conditions on both SC.
This patch must be backported to 2.8.
When data are directly forwarded from a mux to the opposite one, we must not
forget to report send activity when data are successfully sent or report a
blocked send with data are blocked. It is important because otherwise, if
the transfer is quite long, longer than the client or server timeout, an
error may be triggered because the write timeout is reached.
H1, H2 and PT muxes are concerned. To fix the issue, The done_fastword()
callback now returns the amount of data consummed. This way it is possible
to update/reset the FSB data accordingly.
No backport needed.
This commit introduces a generic server-side parsing of type-value pair
arguments and allocation of a TLV list via a new keyword called
set-proxy-v2-tlv-fmt.
This allows to 1) forward any TLV type with the help of fc_pp_tlv,
2) generally, send out any TLV type and value via a log format expression.
To have this fully working the connection will need to be updated in
a follow-up commit to actually respect the new server TLV list.
default-server support has also been implemented.
In this patch, we add the possibility to declare on a table definition
("table" in peer section, or "stick-table" in proxy section) that we
want the remote/peer updates on that table to be pushed on a local
haproxy table in addition to the source table.
Consider this example:
|peers mypeers
| peer local 127.0.0.1:3334
| peer clust 127.0.0.1:3333
| table t1.local type string size 10m store server_id,server_key expire 30s
| table t1.clust type string size 10m store server_id,server_key write-to mypeers/t1.local expire 30s
With this setup, we consider haproxy uses t1.local as cache/local table
for read and write operations, and that t1.clust is a remote table
containing datas processed from t1.local and similar tables from other
haproxy peers in a cluster setup. The t1.clust table will be used to
refresh the local/cache one via the "write-to" statement.
What will happen, is that every time haproxy will see entry updates for
the t1.clust table: it will overwrite t1.local table with fresh data and
will update the entry expiration timer. If t1.local entry doesn't exist
yet (key doesn't exist), it will automatically create it. Note that only
types that cannot be used for arithmetic ops will be handled, and this
to prevent processed values from the remote table from interfering with
computations based on values from the local table. (ie: prevent
cumulative counters from growing indefinitely).
"write-to" will only push supported types if they both exist in the source
and the target table. Be careful with server_id and server_key storage
because they are often declared implicitly when referencing a table in
sticking rules but it is required to declare them explicitly for them to
be pushed between a remote and a local table through "write-to" option.
Also note that the "write-to" target table should have the same type as
the source one, and that the key length should be strictly equal,
otherwise haproxy will raise an error due to the tables being
incompatibles. A table that is already being written to cannot be used
as a source table for a "write-to" target.
Thanks to this patch, it will now be possible to use sticking rules in
peer cluster context by using a local table as a local cache which
will be automatically refreshed by one or multiple remote table(s).
This commit depends on:
- "MINOR: stktable: stktable_init() sets err_msg on error"
- "MINOR: stktable: check if a type should be used as-is"
stick table types now have an extra bit named 'as_is' that allows us to
check if such type should be used as-is or if it may be involved in
arithmetic operations such as counters. This can be useful since those
types are not common and may require specific handling.
e.g.: stktable_data_types[data_type].as_is will be set to 1 if the type
cannot be used in arithmetic operations.
Simplify stick and store sticktable proxy rules postparsing by adding
a sticking rule entry resolve (postparsing) function.
This will ease code maintenance.
This new fetcher can be used to extract the list of cookie names from
Cookie request header or from Set-Cookie response header depending on
the stream direction. There is an optional argument that can be used
as the delimiter (which is assumed to be the first character of the
argument) between cookie names. The default delimiter is comma (,).
Note that we will treat the Cookie request header as a semi-colon
separated list of cookies and each Set-Cookie response header as
a single cookie and extract the cookie names accordingly.
Similar to the previous commit which check for maxconn before allocating
a QUIC connection, this patch checks for maxsslconn at the same step.
This is necessary as a QUIC connection cannot run without a SSL context.
This should be backported up to 2.6. It relies on the following patch :
"BUG/MINOR: ssl: use a thread-safe sslconns increment"
Increment actconn and check maxconn limit when a quic_conn is
instantiated. This is necessary because prior to this patch, quic_conn
instances where not counted. Global actconn was only incremented after
the handshake has been completed and the connection structure is
allocated.
The increment is done using increment_actconn() on INITIAL packet
parsing if a new connection is about to be created. If the limit is
reached, the allocation is cancelled and the INITIAL packet is dropped.
The decrement is done under quic_conn_release(). This means that
quic_cc_conn instances are not taken into account. This seems safe
enough because quic_cc_conn are only used for minimal usage.
The counterpart of this change is that maxconn must not be checked a
second time when listener_accept() is done over a QUIC connection. For
this, a new bind_conf flag BC_O_XPRT_MAXCONN is set for listeners when
maxconn is already counted by the lower layer. For the moment, it is
positionned only for QUIC listeners.
Without this patch, haproxy process could suffer from heavy memory/CPU
load if the number of concurrent handshake is high.
This patch is not considered a bug fix per-se. However, it has a major
benefit to protect against too many QUIC handshakes. As such, it should
be backported up to 2.6. For this, it relies on the following patch :
"MINOR: frontend: implement a dedicated actconn increment function"
Each time a new SSL context is allocated, global.sslconns is
incremented. If global.maxsslconn is reached, the allocation is
cancelled.
This procedure was not entirely thread-safe due to the check and
increment operations conducted at different stage. This could lead to
global.maxsslconn slightly exceeded when several threads allocate SSL
context while sslconns is near the limit.
To fix this, use a CAS operation in a do/while loop. This code is
similar to the actconn/maxconn increment for connection.
A new function increment_sslconn() is defined for this operation. For
the moment, only SSL code is using it. However, it is expected that QUIC
will also use it to count QUIC connections as SSL ones.
This should be backported to all stable releases. Note that prior to the
2.6, sslconns was outside of global struct, so this commit should be
slightly adjusted.
When a new frontend connection is instantiated, actconn global counter
is incremented. If global maxconn value is reached, the connection is
cancelled. This ensures that system limit are under control.
Prior to this patch, the atomic check/increment operations were done
directly into listener_accept(). Move them in a dedicated function
increment_actconn() in frontend module. This will be useful when QUIC
connections will be counted in actconn counter.
Now when calling ha_panic() with a thread still under malloc_trim(),
we'll set a new tainted flag to easily report it, and the output
trace will report that this condition happened and will suggest to
use no-memory-trimming to avoid it in the future.
William suggested that since we can detect the presence of Lua in the
stack, let's combine it with stuck detection to set a new pair of flags
indicating a stuck Lua context and a stuck Lua shared context.
Now, executing an infinite loop in a Lua sample fetch function with
yield disabled crashes with tainted=0xe40 if loaded from a lua-load
statement, or tainted=0x640 from a lua-load-per-thread statement.
In addition, at the end of the panic dump, we can check if Lua was
seen stuck and emit recommendations about lua-load-per-thread and
the choice of dependencies depending on the presence of threads
and/or shared context.
This will make it easier to know that the panic function was called,
for the occasional case where the dump crashes and/or the stack is
corrupted and not much exploitable. Now at least it will be sufficient
to check the tainted value to know that someone called ha_panic(), and
it will also be usable to condition extra analysis.
This function allows to safely map proxy mode to corresponding proto_mode
This will allow for easier code maintenance and prevent mixups between
proxy mode and proto mode.
In 9a74a6c ("MAJOR: log: introduce log backends"), a mistake was made:
it was assumed that the proxy mode was already known during server
keyword parsing in parse_server() function, but this is wrong.
Indeed, "mode log" can be declared late in the proxy section. Due to this,
a simple config like this will cause the process to crash:
|backend test
|
| server name 127.0.0.1:8080
| mode log
In order to fix this, we relax some checks in _srv_parse_init() and store
the address protocol from str2sa_range() in server struct, then we set-up
a postparsing function that is to be called after config parsing to
finish the server checks/initialization that depend on the proxy mode
to be known. We achieve this by checking the PR_CAP_LB capability from
the parent proxy to know if we're in such case where the effective proxy
mode is not yet known (it is assumed that other proxies which are implicit
ones don't provide this possibility and thus don't suffer from this
constraint).
Only then, if the capability is not found, we immediately perform the
server checks that depend on the proxy mode, else the check is postponed
and it will automatically be performed during postparsing thanks to the
REGISTER_POST_SERVER_CHECK() hook.
Note that we remove the SRV_PARSE_IN_LOG_BE flag because it was introduced
in the above commit and it is no longer relevant.
No backport needed unless 9a74a6c gets backported.
The two recent commits below each added one flag to h2c but omitted to
update the __APPEND_FLAG macro used by dev/flags so they are not
properly decoded:
3dd963b35 ("BUG/MINOR: mux-h2: fix http-request and http-keep-alive timeouts again")
68d02e5fa ("BUG/MINOR: mux-h2: make up other blocked streams upon removal from list")
This can be backported along with these commits.
Define a new function srv_add_to_avail_list(). This function is used to
centralize connection insertion in available tree. It reuses a BUG_ON()
statement to ensure the connection is not present in the idle list.
Reverse HTTP bind is very specific in that in rely on a server to
initiate connection. All connection settings are defined on the server
line and ignored from the bind line.
Before this patch, most of keywords were silently ignored. This could
result in a configuration from doing unexpected things from the user
point of view. To improve this situation, add a new 'rhttp_ok' field in
bind_kw structure. If not set, the keyword is forbidden on a reverse
bind line and will cause a fatal config error.
For the moment, only the following keywords are usable with reverse bind
'id', 'name' and 'nbconn'.
This change is safe as it's already forbidden to mix reverse and
standard addresses on the same bind line.
Previously, maxconn keyword was reused for a specific usage on reverse
HTTP binds to specify the number of active connect to proceed. To avoid
confusion, introduce a new dedicated keyword 'nbconn' which is specific
to reverse HTTP bind.
This new keyword is forbidden for non-reverse listener. A fatal error is
emitted during config parsing if this rule is not respected. It's safe
because it's also forbidden to mix standard and reverse addresses on the
same bind line.
Internally, nbconn value will be reassigned to 'maxconn' member of
bind_conf structure. This ensures that listener layer will automatically
reenable the preconnect task each time a connection is closed.
Reverse HTTP listeners are very specific and share only a very limited
subset of keywords with other listeners. As such, it is probable
meaningless to mix standard and reverse addresses on the same bind line.
This patch emits a fatal error during configuration parsing if this is
the case.
The number of updates sent at once was limited to not loop too long to emit
updates when the buffer size is huge or when the number of sync tables is
huge. The limit can be configured and is set to 200 by default. However,
this fix introduced a bug. It is impossible to syncrhonize two peers if the
number of tables is higher than this limit. Thus by default, it is not
possible to sync two peers if there are more than 200 tables to sync.
Technically speacking, a teaching process is finished if we loop on all tables
with no new update messages sent. Because we are limited at each call, the loop
is splitted on several calls. However the restart point for the next loop is
always the last table for which we emitted an update message. Thus with more
tables than the limit, the loop never reachs the end point.
Worse, in conjunction with the bug fixed by "BUG/MEDIUM: peers: Be sure to
always refresh recconnect timer in sync task", it is possible to trigger the
watchdog because the applets may be woken up in loop and leave requesting
more room while its buffer is empty.
To fix the issue, restart conditions for a teaching loop were changed. If
the teach process is interrupted, we now save the restart point, called
stop_local_table. It is the last evaluated table on the previous loop. This
restart point is reset when the teach process is finished.
In additionn, the updates_sent variable in peer_send_msgs() was renamed to
updates to avoid ambiguities. Indeed, the variable is incremented, whether
messages were sent or not.
This patch must be backported as far as 2.6.
Stefan Behte reported that since commit f279a2f14 ("BUG/MINOR: mux-h2:
refresh the idle_timer when the mux is empty"), the http-request and
http-keep-alive timeouts don't work anymore on H2. Before this patch,
and since 3e448b9b64 ("BUG/MEDIUM: mux-h2: make sure control frames do
not refresh the idle timeout"), they would only be refreshed after stream
frames were sent (HEADERS or DATA) but the patch above that adds more
refresh points broke these so they don't expire anymore as long as
there's some activity.
We cannot just revert the fix since it also addressed an isse by which
sometimes the timeout would trigger too early and provoque truncated
responses. The right approach here is in fact to only use refresh the
idle timer when the mux buffer was flushed from any such stream frames.
In order to achieve this, we're now setting a flag on the connection
whenever we write a stream frame, and we consider that flag when deciding
to refresh the buffer after it's emptied. This way we'll only clear that
flag once the buffer is empty and there were stream data in it, not if
there were no such stream data. In theory it remains possible to leave
the flag on if some control data is appended after the buffer and it's
never cleared, but in practice it's not a problem as a buffer will always
get sent in large blocks when the window opens. Even a large buffer should
be emptied once in a while as control frames will not fill it as much as
data frames could.
Given the patch above was backported as far as 2.6, this patch should
also be backported as far as 2.6.
tune.rcvbuf.client and tune.rcvbuf.server are not suitable for shared
dgram sockets because they're per connection so their units are not the
same. However, QUIC's listener and log servers are not connected and
take per-thread or per-process traffic where a socket log buffer might
be too small, causing undesirable packet losses and retransmits in the
case of QUIC. This essentially manifests in listener mode with new
connections taking a lot of time to set up under heavy traffic due to
the small queues causing delays. Let's add a few new settings allowing
to set these shared socket sizes on the frontend and backend side (which
reminds that these are per-front/back and not per client/server hence
not per connection).
Instead of speaking of an initialisation stage for each data
fast-forwarding, we now use the negociate term. Thus init_ff/init_fastfwd
functions were renamed nego_ff/nego_fastfwd.
The zero-copy forwarding or the mux-to-mux forwarding is a way to
fast-forward data without using the channels buffers. Data are transferred
from a mux to the other one. The kernel splicing is an optimization of the
zero-copy forwarding. But it can also use normal buffers (but not channels
ones). This way, it could be possible to fast-forward data with muxes not
supporting the kernel splicing (H2 and H3 muxes) but also with applets.
However, this mode can introduce regressions or bugs in future (just like
the kernel splicing). Thus, It could be usefull to disable this optim. To do
so, in configuration, the global tune settting
'tune.disable-zero-copy-forwarding' may be set in a global section or the
'-dZ' command line parameter may be used to start HAProxy. Of course, this
also disables the kernel splicing.
Because channel_is_empty() function does now only check the channel's
buffer, we can remove it and rely on co_data() instead. Of course, all tests
must be inverted.
channel_is_empty() is thus removed.
It is important to split channels and I/O buffers. When data are pushed in
an I/O buffer, we consider them as forwarded. The channel never sees
them. Fast-forwarded data are now handled in the SE only.
When data were sent using the kernel splicing, we tried to send all data
with no restriction. Most of time it is valid. However, because the payload
representation may differ between the producer and the consumer, it is
important to be able to specify how must data to send via the splicing.
Of course, for performance reason, it is important to maximize amount of
data send via splicing at each call. However, on edge-cases, this now can be
limited.
The kernel splicing support was totally remove waiting for the mux-to-mux
fast-forward implementation. So corresponding mux callbacks can be removed
now.
mux-to-mux fast-forwarding will be added. To avoid mix with the splicing and
simplify the commits, the kernel splicing support is removed from the
stconn. CF_KERN_SPLICING flag is removed and the support is no longer tested
in process_stream().
In the stconn part, rcv_pipe() callback function is no longer called.
Reg-tests scripts testing the kernel splicing are temporarly marked as
broken.
To perform the mux-to-mux data fast-forwarding, 4 new callbacks were added
into the mux_ops structure. 2 callbacks will be used from the stconn for
fast-forward data. The 2 other callbacks will be used by the endpoint to
request an iobuf to the opposite endpoint.
* fastfwd() callback function is used by a producer to forward data
* resume_fastfwd() callback function is used by a consumer if some data are
blocked in the iobuf, to resume the data forwarding.
* init_fastfwd() must be used by an endpoint (the producer one), inside the
fastfwd() callback to request an iobuf to the opposite side (the consumer
one).
* done_fastfwd() must be used by an endpoint (the producer one) at the end
of fastfwd() to notify the opposite endpoint (the consumer one) if data
were forwarded or not.
This API is still under development, so it may evolved. Especially when the
fast-forward will be extended to applets.
2 helper functions were also added into the SE api to wrap init_fastfwd()
and done_fastfwd() callback function of the underlying endpoint.
For now, this API is unsed and not implemented at all in muxes.
It is unused for now, but the iobuf structure now owns a pointer to a
buffer. This buffer will be used to perform mux-to-mux fast-forwarding when
splicing is not supported or unusable. This pointer should be filled by an
endpoint to let the opposite one forward data.
Extra fields, in addition to the buffer, are mandatory because the buffer
may already contains some data. the ".offset" field may be used may be used
as the position to start to copy data. Finally, the amount of data copied in
this buffer must be saved in ".data" field.
Some flags are also added to prepare next changes. And helper stconn
fnuctions are updated to also count data in the buffer. For a first
implementation, it is not planned to handle data in the buffer and in the
pipe in same time. But it will be possible to do so.
Instead of talking about kernel splicing at stconn/sedesc level, we now try
to talk about mux-to-mux fast-forwarding. To do so, 2 functions were added
to know if there are fast-forwarded data and to retrieve this amount of
data. Of course, for now, there is only data in a pipe.
In addition, some flags were renamed to reflect this notion. Note the
channel's documentation was not updated yet.
The pipes used to put data when the kernel splicing is in used are moved in
the SE descriptors. For now, it is just a simple remplacement but there is a
major difference with the pipes in the channel. The data are pushed in the
consumer's pipe while it was pushed in the producer's pipe. So it means the
request data are now pushed in the pipe of the backend SE descriptor and
response data are pushed in the pipe of the frontend SE descriptor.
The idea is to hide the pipe from the channel/SC side and to be able to
handle fast-forwading in pipe but also in buffer. To do so, the pipe is
inside a new entity, called iobuf. This entity will be extended.
An interesting issue was met when testing the mux-to-mux forwarding code.
In order to preserve fairness, in h2_snd_buf() if other streams are waiting
in send_list or fctl_list, the stream that is attempting to send also goes
to its list, and will be woken up by h2_process_mux() or h2_send() when
some space is released. But on rare occasions, there are only a few (or
even a single) streams waiting in this list, and these streams are just
quickly removed because of a timeout or a quick h2_detach() that calls
h2s_destroy(). In this case there's no even to wake up the other waiting
stream in its list, and this will possibly resume processing after some
client WINDOW_UPDATE frames or even new streams, so usually it doesn't
last too long and it not much noticeable, reason why it was left that
long. In addition, measures have shown that in heavy network-bound
benchmark, this exact situation happens on less than 1% of the streams
(reached 4% with mux-mux).
The fix here consists in replacing these LIST_DEL_INIT() calls on
h2s->list with a function call that checks if other streams were queued
to the send_list recently, and if so, which also tries to resume them
by calling h2_resume_each_sending_h2s(). The detection of late additions
is made via a new flag on the connection, H2_CF_WAIT_INLIST, which is set
when a stream is queued due to other streams being present, and which is
cleared when this is function is called.
It is particularly difficult to reproduce this case which is particularly
timing-dependent, but in a constrained environment, a test involving 32
conns of 20 streams each, all downloading a 10 MB object previously
showed a limitation of 17 Gbps with lots of idle CPU time, and now
filled the cable at 25 Gbps.
This should be backported to all versions where it applies.
"log-bufsize" may now be used for a log server (in a log backend) to
configure the bufsize of implicit ring associated to the server (which
defaults to BUFSIZE).
hash lb algorithm can be configured with the "log-balance hash <cnv_list>"
directive. With this algorithm, the user specifies a converter list with
<cnv_list>.
The produced log message will be passed as-is to the provided converter
list, and the resulting hash will be used to select the log server that
will receive the log message.
split sample_process() in 2 parts in order to be able to only process
the converter part of a sample expression from an existing input sample
struct passed as parameter.
Allow the use of the "none" hash-type function so that the key resulting
from the sample expression is directly used as the hash.
This can be useful to do the hashing manually using available hashing
converters, or even custom ones, and then inform haproxy that it can
directly rely on the sample expression result which is explictly handled
as an integer in this case.
Using "mode log" in a backend section turns the proxy in a log backend
which can be used to log-balance logs between multiple log targets
(udp or tcp servers)
log backends can be used as regular log targets using the log directive
with "backend@be_name" prefix, like so:
| log backend@mybackend local0
A log backend will distribute log messages to servers according to the
log load-balancing algorithm that can be set using the "log-balance"
option from the log backend section. For now, only the roundrobin
algorithm is supported and set by default.
This helper function can be used to create a new sink from an existing
server struct (and thus existing proxy as well), in order to spare some
resources when possible.
implicit rings were automatically forced to the parent logger format, but
this was done upon ring creation.
This is quite restrictive because we might want to choose the desired
format right before generating the log header (ie: when producing the
log message), depending on the logger (log directive) that is
responsible for the log message, and with current logic this is not
possible. (To this day, we still have dedicated implicit ring per log
directive, but this might change)
In ring_write(), we check if the sink->fmt is specified:
- defined: we use it since it is the most precise format
(ie: for named rings)
- undefined: then we fallback to the format from the logger
With this change, implicit rings' format is now set to UNSPEC upon
creation. This is safe because the log header building function
automatically enforces the "raw" format when UNSPEC is set. And since
logger->format also defaults to "raw", no change of default behavior
should be expected.
Introduce log_header struct to easily pass log header data between
functions and use that to simplify the logic around log header
handling.
While at it, some outdated comments were updated as well.
No change in behavior should be expected.
log targets were immediately embedded in logger struct (previously
named logsrv) and could not be used outside of this context.
In this patch, we're introducing log_target type with the associated
helper functions so that it becomes possible to declare and use log
targets outside of loggers scope.
When 'log' directive was implemented, the internal representation was
named 'struct logsrv', because the 'log' directive would directly point
to the log target, which used to be a (UDP) log server exclusively at
that time, hence the name.
But things have become more complex, since today 'log' directive can point
to ring targets (implicit, or named) for example.
Indeed, a 'log' directive does no longer reference the "final" server to
which the log will be sent, but instead it describes which log API and
parameters to use for transporting the log messages to the proper log
destination.
So now the term 'logsrv' is rather confusing and prevents us from
introducing a new level of abstraction because they would be mixed
with logsrv.
So in order to better designate this 'log' directive, and make it more
generic, we chose the word 'logger' which now replaces logsrv everywhere
it was used in the code (including related comments).
This is internal rewording, so no functional change should be expected
on user-side.
CIDs tree is now allocated dynamically since the following commit :
276697438d
MINOR: quic: Use a pool for the connection ID tree.
This can caused a crash if qc_new_conn() is interrupted due to an
intermediary failed allocation. When freeing all connection members,
free_quic_conn_cids() is used. However, this function does not support a
NULL cids.
To fix this, simply check that cids is NULL during free_quic_conn_cids()
prologue.
This bug was reproduced using -dMfail.
No need to backport.
Since commit 5afcb686b ("MAJOR: connection: purge idle conn by last usage")
in 2.9-dev4, the test on conn->toremove_list added to conn_get_idle_flag()
in 2.8 by commit 3a7b539b1 ("BUG/MEDIUM: connection: Preserve flags when a
conn is removed from an idle list") becomes misleading. Indeed, now both
toremove_list and idle_list are shared by a union since the presence in
these lists is mutually exclusive. However, in conn_get_idle_flag() we
check for the presence in the toremove_list to decide whether or not to
delete the connection from the tree. This test now fails because instead
it sees the presence in the idle or safe list via the union, and concludes
the element must not be removed. Thus the element remains in the tree and
can be found later after the connection is released, causing crashes that
Tristan reported in issue #2292.
The following config is sufficient to reproduce it with 2 threads:
defaults
mode http
timeout client 5s
timeout server 5s
timeout connect 1s
listen front
bind :8001
server next 127.0.0.1:8002
frontend next
bind :8002
timeout http-keep-alive 1
http-request redirect location /
Sending traffic with a few concurrent connections and some short timeouts
suffices to instantly crash it after ~10k reqs:
$ h2load -t 4 -c 16 -n 10000 -m 1 -w 1 http://0:8001/
With Amaury we analyzed the conditions in which the function is called
in order to figure a better condition for the test and concluded that
->toremove_list is never filled there so we can safely remove that part
from the test and just move the flag retrieval back to what it was prior
to the 2.8 patch above. Note that the patch is not reverted though, as
the parts that would drop the unexpected flags removal are unchanged.
This patch must NOT be backported. The code in 2.8 works correctly, it's
only the change in 2.9 that makes it misbehave.
Move all QUIC trace definitions from quic_conn.h to quic_trace-t.h. Also
remove multiple definition trace_quic macro definition into
quic_trace.h. This forces all QUIC source files who relies on trace to
include it while reducing the size of quic_conn.h.
This bug was detected when compiling haproxy against aws-lc TLS stack
during QUIC interop runner tests. Some algorithms could be negotiated by haproxy
through the TLS stack but not fully supported by haproxy QUIC implentation.
This leaded tls_aead() to return NULL (same thing for tls_md(), tls_hp()).
As these functions returned values were never checked, they could triggered
segfaults.
To fix this, one closes the connection as soon as possible with a
handshake_failure(40) TLS alert. Note that as the TLS stack successfully
negotiates an algorithm, it provides haproxy with CRYPTO data before entering
->set_encryption_secrets() callback. This is why this callback
(ha_set_encryption_secrets() on haproxy side) is modified to release all
the CRYPTO frames before triggering a CONNECTION_CLOSE with a TLS alert. This is
done calling qc_release_pktns_frms() for all the packet number spaces.
Modify some quic_tls_keys_hexdump to avoid crashes when the ->aead or ->hp EVP_CIPHER
are NULL.
Modify qc_release_pktns_frms() to do nothing if the packet number space passed
as parameter is not intialized.
This bug does not impact the QUIC TLS compatibily mode (USE_QUIC_OPENSSL_COMPAT).
Thank you to @ilia-shipitsin for having reported this issue in GH #2309.
Must be backported as far as 2.6.
The openssl-compat.h file has some function which were implemented in
order to provide compatibility with openssl < 1.0.0. Most of them where
to support the 0.9.8 version, but we don't support this version anymore.
This patch removes the deprecated code from openssl-compat.h
Many actions take arguments after a parenthesis. When this happens, they
have to be tagged in the parser with KWF_MATCH_PREFIX so that a sub-word
is sufficient (since by default the whole block including the parenthesis
is taken).
The problem with this is that the parser stops on the first match. This
was OK years ago when there were very few actions, but over time new ones
were added and many actions are the prefix of another one (e.g. "set-var"
is the prefix of "set-var-fmt"). And what happens in this case is that the
first word is picked. Most often that doesn't cause trouble because such
similar-looking actions involve the same custom parser so actually the
wrong selection of the first entry results in the correct parser to be
used anyway and the error to be silently hidden.
But it's getting worse when accidentally declaring prefixes in multiple
files, because in this case it will solely depend on the object file link
order: if the longest name appears first, it will be properly detected,
but if it appears last, its other prefix will be detected and might very
well not be related at all and use a distinct parser. And this is random
enough to make some actions succeed or fail depending on the build options
that affect the linkage order. Worse: what if a keyword is the prefix of
another one, with a different parser but a compatible syntax ? It could
seem to work by accident but not do the expected operations.
The correct solution is to always look for the longest matching name.
This way the correct keyword will always be matched and used and there
will be no risk to randomly pick the wrong anymore.
This fix must be backported to the relevant stable releases.
sc_need_room() function may be called with a negative value. In this case,
the intent is to be notified if any space was made in the channel buffer. In
the function, we get the min between the requested room and the maximum
possible room in the buffer, considering it may be an HTX buffer.
However this max value is unsigned and leads to an unsigned comparison,
casting the negative value to an unsigned value. Of course, in this case,
this always leads to the wrong result. This bug seems to have no effect but
it is hard to be sure.
To fix the issue, we take care to respect the requested room sign by casting
the max value to a signed integer.
This patch must be backported to 2.8.
now forward_px only serves as a hint to know if a proxy was created
specifically for the sink, in which case the sink is responsible for it.
Everywhere forward_px was used in appctx context: get the parent proxy from
the sft->srv instead.
This permits to finally get rid of the double link dependency between sink
and proxy.
The regtests are using the "feature()" predicate but this one can only
rely on build-time options. It would be nice if some runtime-specific
options could be detected at boot time so that regtests could more
flexibly adapt to what is supported (capabilities, splicing, etc).
Similarly, certain features that are currently enabled with USE_XXX
could also be automatically detected at build time using ifdefs and
would simplify the configuration, but then we'd lose the feature
report in the feature list which is convenient for regtests.
This patch makes sure that haproxy -vv shows the variable's contents
and not the macro's contents, and adds a new hap_register_feature()
to allow the code to register a new keyword.
This patch add a hash of the Origin header to the cache's secondary key.
This enables to manage store responses that have a "Vary: Origin" header
in the cache when vary is enabled.
This cannot be considered as a means to manage CORS requests though, it
only processes the Origin header and hashes the presented value without
any form of URI normalization.
This need was expressed by Philipp Hossner in GitHub issue #251.
Co-Authored-by: Philipp Hossner <philipp.hossner@posteo.de>
This patch fixes the build with AWSLC and USE_QUIC=1, this is only meant
to be able to build for now and it's not feature complete.
The set_encryption_secrets callback has been split in set_read_secret
and set_write_secret.
Missing features:
- 0RTT was disabled.
- TLS1_3_CK_CHACHA20_POLY1305_SHA256, TLS1_3_CK_AES_128_CCM_SHA256 were disabled
- clienthello callback is missing, certificate selection could be
limited (RSA + ECDSA at the same time)
If a "Content-length" or "Transfer-Encoding; chunked" headers is found or
inserted in an outgoing message, a specific flag is now set on the H1
stream. H1S_F_HAVE_CLEN is set for "Content-length" header and
H1S_F_HAVE_CHNK for "Transfer-Encoding: chunked".
This will be useful to properly format outgoing messages, even if one of
these headers was removed by hand (with no update of the message meta-data).
Refactor alloc_bind_address() function which is used to allocate a
sockaddr if a connection to a target server relies on a specific source
address setting.
The main objective of this change is to be able to use this function
outside of backend module, namely for preconnections using a reverse
server. As such, this function is now exported globally.
For reverse connect, there is no stream instance. As such, the function
parts which relied on it were reduced to the minimal. Now, stream is
only used if a non-static address is configured which is useful for
usesrc client|clientip|hdr_ip. These options have no sense for reverse
connect so it should be safe to use the same function.
Improve EACCES permission errors encounterd when using QUIC connection
socket at runtime :
* First occurence of the error on the process will generate a log
warning. This should prevent users from using a privileged port
without mandatory access rights.
* Socket mode will automatically fallback to listener socket for the
receiver instance. This requires to duplicate the settings from the
bind_conf to the receiver instance to support configurations with
multiple addresses on the same bind line.
Define a new bind option quic-socket :
quic-socket [ connection | listener ]
This new setting works in conjunction with the existing configuration
global tune.quic.socket-owner and reuse the same semantics.
The purpose of this setting is to allow to disable connection socket
usage on listener instances individually. This will notably be useful
when needing to deactivating it when encountered a fatal permission
error on bind() at runtime.
When EBO was brought to pl_take_w() by plock commit 60d750d ("plock: use
EBO when waiting for readers to leave in take_w() and stow()"), a mistake
was made: the mask against which the current value of the lock is tested
excludes the first reader like in stow(), but it must not because it was
just obtained via an ldadd() which means that it doesn't count itself.
The problem this causes is that if there is exactly one reader when a
writer grabs the lock, the writer will not wait for it to leave before
starting its operations.
The solution consists in checking for any reader in the IF. However the
mask passed to pl_wait_unlock_*() must still exclude the lowest bit as
it's verified after a subsequent load.
Kudos to Remi Tricot-Le Breton for reporting and bisecting this issue
with a reproducer.
No backport is needed since this was brought in 2.9-dev3 with commit
8178a5211 ("MAJOR: threads/plock: update the embedded library again").
The code is now on par with plock commit ada70fe.
Add a new MUX flag MX_FL_REVERSABLE. This value is used to indicate that
MUX instance supports connection reversal. For the moment, only HTTP/2
multiplexer is flagged with it.
This allows to dynamically check if reversal can be completed during MUX
installation. This will allow to relax requirement on config writing for
'tcp-request session attach-srv' which currently cannot be used mixed
with non-http/2 listener instances, even if used conditionnally with an
ACL.
Define a new error code for connection CO_ER_REVERSE. This will be used
to report an issue which happens on a connection targetted for reversal
before reverse process is completed.
