redirect rules are documented as being processed last before
use_backend but were mistakenly processed before block rules.
Fortunately very few people use a mix of block and redirect
rules, so this bug has never been reported yet.
The splice code did not consider compatibility between both ends
of the connection. Now we set different capabilities on each
stream interface, depending on what the protocol can splice to/from.
Right now, only TCP is supported. Thanks to this, we're now able to
automatically detect when splice() is not implemented and automatically
disable it on one end instead of reporting errors to the upper layer.
It will soon be necessary to support permanent analysers (eg: HTTP in
keep-alive mode). We first have to slightly rework the call to the
request analysers so that we don't force ->analysers to be 0 before
forwarding data.
When the nolinger option is used, we must not close too fast because
some data might be left unsent. Instead we must proceed with a normal
shutdown first, then a close. Also, we want to avoid merging FIN with
the last segment if nolinger is set, because if that one gets lost,
there is no chance for it to be retransmitted.
We now support up to 10 distinct configuration files. They are
all loaded in the order defined by -f <file1> -f <file2> ...
This can be useful in order to store global, private, public,
etc... configurations in distinct files.
This is a first step towards support of multiple configuration files.
Now readcfgfile() only reads a file in memory and performs very minimal
parsing. The checks are performed afterwards.
Buffer errors (timeouts and I/O errors) were handled at two places,
just after the analysers and after again.
Now that the timeout detection has moved, it has become easier to
handle those errors.
This has also made it possible for the request and response analysers
to be processed together as a down-up event, and all the up-down I/O
updates to be processed afterwards, which is exactly what we're looking
for. Interestingly this has reduced the number of iterations of
(stream_int, req_resp) from (5,6,5) to (5,5,4).
Several tests have been run without any issue found.
It's useless to check for buffer timeouts every time we call
process_session() because we already control when we set the flag. So
let's check them at the precise moment where the flag is set.
We want to be able to keep information about errors and timeouts
as long as possible in the buffer. Let's not clear these flags
anymore and keep them static. This does not seem to cause any
trouble, though a finer review might be wise.
Sometimes it can be useful to limit the advertised TCP MSS on
incoming connections, for instance when requests come through
a VPN or when the system is running with jumbo frames enabled.
Passing the "mss <value>" arguments to a "bind" line will set
the value. This works under Linux >= 2.6.28, and maybe a few
earlier ones, though due to an old kernel bug most of earlier
versions will probably ignore it. It is also possible that some
other OSes will support this.
This new option enables combining of request buffer data with
the initial ACK of an outgoing TCP connection. Doing so saves
one packet per connection which is quite noticeable on workloads
mostly consisting in small objects. The option is not enabled by
default.
Setting TCP_CORK on a socket before sending the last segment enables
automatic merging of this segment with the FIN from the shutdown()
call. Playing with TCP_CORK is not easy though as we have to track
the status of the TCP_NODELAY flag since both are mutually exclusive.
Doing so saves one more packet per session and offers about 5% more
performance.
There is no reason not to do it, so there is no associated option.
This option disables TCP quick ack upon accept. It is also
automatically enabled in HTTP mode, unless the option is
explicitly disabled with "no option tcp-smart-accept".
This saves one packet per connection which can bring reasonable
amounts of bandwidth for servers processing small requests.
A new keyword prefix "default" has been introduced in order to
reset some options to their default values. This can be needed
for instance when an option is forced disabled or enabled in a
defaults section and when later sections want to use automatic
settings regardless of what was specified there. Right now it
is only supported by options, just like the "no" prefix.
Sometimes we would want to implement implicit default options,
but for this we need to be able to disable them, which requires
to keep track of "no option" settings. With this change, an option
explicitly disabled in a defaults section will still be seen as
explicitly disabled. There should be no regression as nothing makes
use of this yet.
Some users are already hitting the 64k source port limit when
connecting to servers. The system usually maintains a list of
unused source ports, regardless of the source IP they're bound
to. So in order to go beyond the 64k concurrent connections, we
have to manage the source ip:port lists ourselves.
The solution consists in assigning a source port range to each
server and use a free port in that range when connecting to that
server, either for a proxied connection or for a health check.
The port must then be put back into the server's range when the
connection is closed.
This mechanism is used only when a port range is specified on
a server. It makes it possible to reach 64k connections per
server, possibly all from the same IP address. Right now it
should be more than enough even for huge deployments.
When a new process fails to grab some ports, it sends a signal to
the old process in order to release them. Then it tries to bind
again. If it still fails (eg: one of the ports is bound to a
completely different process), it must send the continue signal
to the old process so that this one re-binds to the ports. This
is correctly done, but the newly bound ports are not released
first, which sometimes causes the old process to remain running
with no port bound. The fix simply consists in unbinding all
ports before sending the signal to the old process.
It is recommended to have -D in init scripts, but -D also implies
quiet mode, which hides warning messages, and both options are now
completely unrelated. Remove the implication to get warnings with
-D.
The stats HTML output were barely readable on some browsers such as
firefox on Linux, due to the selected helvetica font which is too
small. Specifying "arial" first fixes the issue without changing the
table size. Also, the default size of 0.8em choosen to get 10px out
of 12px is wrong because it gets 9px when rounded down.
Some users want to keep the max sessions/s seen on servers, frontends
and backends for capacity planning. It's easy to grab it while the
session count is updated, so let's keep it.
Some people are using haproxy in a shared environment where the
system logger by default sends alert and emerg messages to all
consoles, which happens when all servers go down on a backend for
instance. These people can not always change the system configuration
and would like to limit the outgoing messages level in order not to
disturb the local users.
The addition of an optional 4th field on the "log" line permits
exactly this. The minimal log level ensures that all outgoing logs
will have at least this level. So the logs are not filtered out,
just set to this level.
There is a patch made by me that allow for balancing on any http header
field.
[WT:
made minor changes:
- turned 'balance header name' into 'balance hdr(name)' to match more
closely the ACL syntax for easier future convergence
- renamed the proxy structure fields header_* => hh_*
- made it possible to use the domain name reduction to any header, not
only "host" since it makes sense to do it with other ones.
Otherwise patch looks good.
/WT]
Since 1.3.17, a config containing one of the following lines would
crash the parser :
tcp content reject
tcp content accept
This is because a check is performed on the condition which is not
specified. The obvious fix consists in checkinf for a condition
first.
Some big traffic sites have trouble dealing with logs and tend to
disable them. Here are two new options to help cope with massive
logs.
- dontlog-normal only disables logging for 100% successful
connections, other ones will still be logged
- log-separate-errors will cause non-100% successful connections
to be logged at level "err" instead of level "info" so that a
properly configured syslog daemon can send them to a different
file for longer conservation.
epoll, sepoll and kqueue pollers should check that their fd is not
closed before attempting to close it, otherwise we can end up with
multiple closes of fd #0 upon exit, which is harmless but dirty.
The small list of signals currently handled by haproxy were processed
as soon as they were received. This has caused trouble with calls to
pool_gc2() occuring in the middle of libc's memory management functions
seldom causing deadlocks preventing the old process from leaving.
Now these signals use the new async signal framework and are called
asynchronously, when there is no risk of recursion. This ensures more
reliable operation, especially for sensible processing such as memory
management.
If an asynchronous signal is received outside of the poller, we don't
want the poller to wait for a timeout to occur before processing it,
so we set its timeout to zero, just like we do with pending tasks in
the run queue.
These functions will be used to deliver asynchronous signals in order
to make the signal handling functions more robust. The goal is to keep
the same interface to signal handlers.
I have attached a patch which will add on every http request a new
header 'X-Original-To'. If you have HAProxy running in transparent mode
with a big number of SQUID servers behind it, it is very nice to have
the original destination ip as a common header to make decisions based
on it.
The whole thing is configurable with a new option 'originalto'. I have
updated the sourcecode as well as the documentation. The 'haproxy-en.txt'
and 'haproxy-fr.txt' files are untouched, due to lack of my french
language knowledge. ;)
Also the patch adds this header for IPv4 only. I haven't any IPv6 test
environment running here and don't know if getsockopt() with SO_ORIGINAL_DST
will work on IPv6. If someone knows it and wants to test it I can modify
the diff. Feel free to ask me questions or things which should be changed. :)
--Maik
The pointer arithmetics was wrong in http_capture_bad_message().
This has no impact right now because the error only msg->som was
affected and right now it's always 0. But this was a bug waiting
for keepalive support to strike.
The response message in the transaction structure was not properly
initialised at session initialisation. In theory it cannot cause any
trouble since the affected field os expected to always remain NULL.
However, in some circumstances, such as building on 64-bit platforms
with certain options, the struct session can be exactly 1024 bytes,
the same size of the requri field, so the pools are merged and the
uninitialised field may contain non-null data, causing crashes if
an invalid response is encountered and archived.
The fix simply consists in correctly initialising the missing fields.
This bug cannot affect architectures where the session pool is not
shared (32-bit architectures), but this is only by pure luck.
A race condition exists in the hot reconfiguration code. It is
theorically possible that the second signal is sent during a free()
in the first list, which can cause crashes or freezes (the later
have been observed). Just set up a counter to ensure we do not
recurse.
The byte counters have long been 64-bit to avoid overflows. But with
several sites nowadays, we see session counters wrap around every 10-days
or so. So it was the moment to switch counters to 64-bit, including
error and warning counters which can theorically rise as fast as session
counters even if in practice there is very low risk.
The performance impact should not be noticeable since those counters are
only updated once per session. The stats output have been carefully checked
for proper types on both 32- and 64-bit platforms.
It's useful to be able to accept an invalid header name in a request
or response but still be able to monitor further such errors. Now,
when an invalid request/response is received and accepted due to
an "accept-invalid-http-{request|response}" option, the invalid
request will be captured for later analysis with "show errors" on
the stats socket.
Sometimes it is required to let invalid requests pass because
applications sometimes take time to be fixed and other servers
do not care. Thus we provide two new options :
option accept-invalid-http-request (for the frontend)
option accept-invalid-http-response (for the backend)
When those options are set, invalid requests or responses do
not cause a 403/502 error to be generated.
This function sets CSS letter spacing after each 3rd digit. The page must
create a class "rls" (right letter spacing) with style "letter-spacing: 0.3em"
in order to use it.
