Collecting captures of /sys isn't sufficient for NUMA development because
haproxy detects the number of CPUs at boot time and will not be able to
inspect more than this number. Let's just have a small utility to report
a fake number of CPUs, that will be loaded using LD_PRELOAD. It checks
the NCPU variable if it exists and will present this number of CPUs, or
if it does not exist, will expose the maximum supported number.
Some commands such as $(cmd_CC) etc already handle the quiet vs verbose
mode in the makefile, but sometimes we may want to pass other info. The
new "qinfo" macro can be called with a 9-char string argument (spaces
included) as a prefix for some commands, to emit that string when in
quiet mode. The caller must fill the spaces needed for alignment. E.g:
$(call quinfo, CC )$(CC) ...
Running "make clean" currently gets rid of a number of auxiliary tools,
including the standalone ones that do not depend on haproxy's build
options. This is a bit annoying as they have to be rebuilt each time.
Let's move them to the distclean target instead.
Since 5ee266b7 ("MINOR: error: simplify startup_logs_init_shm"), the FD
of the startup logs is always closed and the HAPROXY_STARTUPLOGS_FD
variable is not used anymore. Which means we only need a mmap.
Indeed the shm_open() function was only needed to keep the shm between
the exec() of the master so we can get the logs stored there after doing
the final exec() in wait mode. Since the wait mode doesn't exist
anymore and the parsing is done in a worker, we only need to share a
memory zone between the master and the worker.
This patch removes shm_open() and replace it with a simple mmap(), this
way the shared startup-logs become more portable and USE_SHM_OPEN is not
required anymore.
This bug arrived with this commit in the current dev branch:
056ec51c26 MEDIUM: ssl/ocsp: counters for OCSP stapling
and could occur for QUIC connections during handshake when the underlying
<conn> connection object is not already initialized. So in this case the TLS
counters attached to TLS listeners cannot be accessed through this object but
from the QUIC connection object.
Modify the code to initialize the listener (<li> variable) for both QUIC
and TCP connections, then initialize the variables for the TLS counters
if the listener is also initialized.
Thank you to @Tristan971 for having reported this issue in GH #2833.
Must be backported with the commit mentioned above if it is planned to be
backported.
A 'resolvers' section may be defined without any nameserver. In that case,
we must take care to not dump corresponding Prometheus metrics. However
there is an issue that could lead to a crash or a strange infinite loop
because we are looping on an empty list and, at some point, we are
dereferencing an invalid pointer.
There is an issue because the loop on the nameservers of a resolvers section
is performed via callback functions and not the standard list_for_each_entry
macro. So we must take care to properly detect end of the list and empty
lists for nameservers. But the fix is not so simple because resolvers
sections with and without nameservers may be mixed.
To fix the issue, in rslv_promex_start_ts() and rslv_promex_next_ts(), when the
next resolvers section must be evaluated, a loop is now used to properly skip
empty sections.
This patch is related to #2831. Not sure it fixes it. It must be backported
as far as 3.0.
This commit is a direct follow-up to the previous one. As already
described, a previous fix was merged to prevent streamdesc attach
operation on already completed QCS instances scheduled for purging. This
was implemented by skipping app proto decoding.
However, this has a bad side-effect for remote uni-directional stream.
If receiving a FIN stream frame on such a stream, it will considered as
complete because streamdesc are never attached to a uni stream. Due to
the mentionned new fix, this prevent analysis of this last frame for
every uni stream.
To fix this, do not skip anymore app proto decoding for completed QCS.
Update instead qcs_attach_sc() to transform it as a noop function if QCS
is already fully closed before streamdesc instantiation. However,
success return value is still used to prevent an invalid decoding error
report.
The impact of this bug should be minor. Indeed, HTTP3 and QPACK uni
streams are never closed by the client as this is invalid due to the
spec. The only issue was that this prevented QUIC MUX to close the
connection with error H3_ERR_CLOSED_CRITICAL_STREAM.
This must be backported along the previous patch, at least to 3.1, and
eventually to 2.8 if mentionned patches are merged there.
A recent fix was introduced to ensure that a streamdesc instance won't
be attached to an already completed QCS which is eligible to purging.
This was performed by skipping application protocol decoding if a QCS is
in such a state. Here is the patch responsible for this change.
caf60ac696
BUG/MEDIUM: mux-quic: do not attach on already closed stream
However, this is too restrictive, in particular for unidirection stream
where no streamdesc is never attached. To fix this behavior, first
qcs_attach_sc() API has been modified. Instead of returning a streamdesc
instance, it returns either 0 on success or a negative error code.
There should be no functional changes with this patch. It is only to be
able to extend qcs_attach_sc() with the possibility of skipping
streamdesc instantiation while still keeping a success return value.
This should be backported wherever the above patch has been merged. For
the record, it was scheduled for immediate backport on 3.1, plus merging
on older releases up to 2.8 after a period of observation.
The following patch was a major refactoring of QUIC MUX. It removes
pacing specific code path. In particular, qcc_wakeup() utility function
was removed and replaced by its tasklet_wakup() usage.
41f0472d96
MEDIUM: mux-quic: remove pacing specific code on qcc_io_cb
However, an incorrect substitution was performed in qcc_set_error(). As
such, there was no explicit wakeup in case an error is detected by QUIC
MUX or the app protocol layer. This may lead to missing error reporting
to clients.
Fix this by re-add tasklet_wakup() usage into qcc_set_error().
This must be backported up to 3.1 where above patch is scheduled.
errorfile and errorloc directives expect excatly two arguments. But extra
arguments were just ignored while an error should be emitted. It is now
fixed.
This patch could be backported as far as 2.2 if necessary.
The do-log action does not accept argument for now. But an error was
triggered if any extra arguments was found, preventing the use of if/unless
conditionnals.
When an action is parsed, expected arguments must be tested to detect
missing ones but not unexpected extra arguments because this should be
performed by the conditionnal parser. So just removing the test in the
do-log parser function is enough to fix the issue.
This patch must be backported to 3.1.
Due to QUIC packet reordering, a stream may be opened via a new
RESET_STREAM or STOP_SENDING frame. This would cause either Tx or Rx
channel to be immediately closed.
This can cause an issue with current QUIC MUX implementation with QCS
purging. QCS are inserted into QCC purge list when transfer could be
considered as completed. In most cases, this happens after full
request/response exchange. However, it can also happens after request
reception if RESET_STREAM/STOP_SENDING are received first.
A BUG_ON() crash will occur if a STREAM frame is received after. In this
case, streamdesc instance will be attached via qcs_attach_sc() to handle
the new request. However, QCS is already considered eligible to purging.
It could cause it to be released while its streamdesc instance remains.
A BUG_ON() crash detects this problem in qcc_purge_streams().
To fix this, extend qcc_decode_qcs() to skip app proto rcv_buf
invokation if QCS is considered completed. A similar condition was
already implemented when read was previously aborted after a
STOP_SENDING emission by QUIC MUX.
This crash was reproduced on haproxy.org. Here is the output of the
backtrace :
Core was generated by `./haproxy-dev -db -f /etc/haproxy/haproxy-current.cfg -sf 16495'.
Program terminated with signal SIGILL, Illegal instruction.
#0 0x00000000004e442b in qcc_purge_streams (qcc=0x774cca0) at src/mux_quic.c:2661
2661 BUG_ON_HOT(!qcs_is_completed(qcs));
[Current thread is 1 (LWP 1457)]
[ ## gdb ## ] bt
#0 0x00000000004e442b in qcc_purge_streams (qcc=0x774cca0) at src/mux_quic.c:2661
#1 0x00000000004e4db7 in qcc_io_process (qcc=0x774cca0) at src/mux_quic.c:2744
#2 0x00000000004e5a54 in qcc_io_cb (t=0x7f71193940c0, ctx=0x774cca0, status=573504) at src/mux_quic.c:2886
#3 0x0000000000b4f792 in run_tasks_from_lists (budgets=0x7ffdcea1e670) at src/task.c:603
#4 0x0000000000b5012f in process_runnable_tasks () at src/task.c:883
#5 0x00000000007de4a3 in run_poll_loop () at src/haproxy.c:2771
#6 0x00000000007deb9f in run_thread_poll_loop (data=0x1335a00 <ha_thread_info>) at src/haproxy.c:2985
#7 0x00000000007dfd8d in main (argc=6, argv=0x7ffdcea1e958) at src/haproxy.c:3570
This BUG_ON() crash can only happen since 3.1 refactoring. Indeed, purge
list was only implemented on this version. As such, please backport it
on 3.1 immediately. However, a logic issue remains for older version as
a stream could be attached on a fully closed QCS. Thus, it should be
backported up to 2.8, this time after a period of observation.
Add traces into qcs_attach_sc(). This function is called when a request
is received on a QCS stream and a streamdesc instance is attached. This
will be useful to facilitate debugging.
Properly fix BUG_ON() occurence when QUIC MUX emits only empty STREAM
frames. This was addressed by a previous patch but it causes another
regression so a revert was needed.
BUG_ON() on qcc_build_frms() return value is invalid. Indeed,
qcc_build_frms() may return 0, but this does not imply that frame list
is empty, as encoded frames can have a zero length payload. As such,
simply remove this invalid BUG_ON().
This must be backported up to 3.1.
This reverts commit 9806453742.
Above patch tried to fix a BUG_ON() occurence when MUX only emitted
empty STREAM frames via qcc_build_frms(). Return value of qcs_send() was
changed from the payload STREAM frame to the whole frame length.
However, this is invalid as this return value is used to ensure
connection flow-control is not exceeded on sending retry. This causes
occurence of BUG_ON() crash in qcc_io_send() as send-list is not
properly purged after QCS emission.
Reverts this incorrect fix. The original issue will be properly dealt in
the next commit.
This commit must be backported to 3.1 if reverted commit was already
applied on it.
When data was copied from RX buffers to the channel buffer, more data than
expected could be moved because amount of data copied was never decremented
from the limit. This could lead to a stream dead lock when the compression
filter was inuse.
The issue was introduced by commit 4eb3ff1 ("MAJOR: mux-h2: make streams use
the connection's buffers") but revealed by 3816c38 ("MAJOR: mux-h2: permit a
stream to allocate as many buffers as desired").
Because a h2 stream can now have several RX buffers, in h2_rcv_buf(), we
loop on these buffers to fill the channel buffer. However, we must still
take care to respect the limit to not copy to much data. However, the
"count" variable was never decremented to reflect amount of data already
copied. So, it was possible to exceed the limit.
It was an issue when the compression filter was inuse because the channel
buffer could be fully filled, preventing the compression to be
performed. When this happened, the stream was infinitly blocked because the
compression filter was asking for some space but nothing was scheduled to be
forwarded.
This patch should fix the issue #2826. It must be backported to 3.1.
A BUG_ON() is present in qcc_io_send() to ensure that encoded frame list
is empty if qcc_build_frms() previously returned 0.
This BUG_ON() may be triggered if empty STREAM frame is encoded for
standalone FIN. Indeed, qcc_build_frms() returns the sum of all STREAM
payload length. In case only empty STREAM frames are generated, return
value will be 0, despite new frames encoded and inserted into frame
list.
To fix this, change return value of qcs_send(). This now returns the
whole STREAM frame length, both header and payload included. This
ensures that qcc_build_frms() won't return a nul value if new frames are
encoded, even empty ones.
This must be backported up to 3.1.
Some actions such as "sc0_get_gpc0" (using smp_fetch_sc_stkctr()
internally) can take an optional table name as parameter to perform the
lookup on a different table from the tracked one but using the key from
the tracked entry. It is done by leveraging the stktable_lookup() function
which was originally meant to perform intra-table lookups.
Calling sc0_get_gpc0() with a different table name will result in
stktable_lookup() being called to perform lookup using a stktsess from
a different table. While it is theorically fine, it comes with a pitfall:
both tables (the one from where the stktsess originates and the actual
target table) should rely on the exact same key type and length.
Failure to do so actually results in undefined behavior, because the key
type and/or length from one table is used to perform the lookup in
another table, while the underlying lookup API expects explicit type and
key length.
For instance, consider the below example:
peers testpeers
bind 127.0.0.1:10001
server localhost
table test type binary len 1 size 100k expire 1h store gpc0
table test2 type string size 100k expire 1h store gpc0
listen test_px
mode http
bind 0.0.0.0:8080
http-request track-sc0 bin(AA) table testpeers/test
http-request track-sc1 str(ok) table testpeers/test2
log-format "%[sc0_get_gpc0(testpeers/test2)]"
log stdout format raw local0
server s1 git.haproxy.org:80
Performing a curl request to localhost:8080 will cause unitialized reads
because string "ok" from test2 table will be compared as a string against
"AA" binary sample which is not NULL terminated:
==2450742== Conditional jump or move depends on uninitialised value(s)
==2450742== at 0x484F238: strlen (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==2450742== by 0x27BCE6: stktable_lookup (stick_table.c:539)
==2450742== by 0x281470: smp_fetch_sc_stkctr (stick_table.c:3580)
==2450742== by 0x283083: smp_fetch_sc_get_gpc0 (stick_table.c:3788)
==2450742== by 0x2A805C: sample_process (sample.c:1376)
So let's prevent that by adding some comments in stktable_set_entry()
func description, and by adding a check in smp_fetch_sc_stkctr() to ensure
both source stksess and target table share the same key properties.
While it could be relevant to backport this in all stable versions, it is
probably safer to wait for some time before doing so, to ensure that no
existing configs rely on this ambiguity because the fact that the target
table and source stksess entry need to share the same key type and length
is not explicitly documented.
In d54e8f8107 ("DOC: config: reorganize actions into their own section"),
"track-sc0" keyword was properly documented but the keyword was not placed
in the action keywords matrix alongside other track-sc* statements. It
was probably overlooked, so let's fix that.
Could be backported up to 2.9 with d54e8f8107.
Released version 3.2-dev2 with the following main changes :
- MINOR: build: define DEBUG_STRESS
- MINOR: applet: define applet_putchk_stress() alternative
- MINOR: stats: use stress mode to force reentrant dumps
- CI: scripts: add support for AWS-LC-FIPS in build-ssl.sh
- MINOR: ssl: add "FIPS" details in haproxy -vv
- MEDIUM: ssl: rename 'OpenSSL' by 'SSL library' in haproxy -vv
- CI: github: let's add an AWS-LC-FIPS job
- MINOR: window_filter: rely on the time to update the filter samples (QUIC/BBR)
- BUG/MINOR: quic: wrong logical statement in in_recovery_period() (BBR)
- BUG/MINOR: quic: fix BBB max bandwidth oscillation issue.
- BUG/MINOR: quic: wrong bbr_target_inflight() implementation
- BUG/MINOR: quic: remove max_bw filter from delivery rate sampling
- BUG/MINOR: quic: underflow issue for bbr_inflight_hi_from_lost_packet()
- BUG/MINOR: quic: reduce packet losses at least during ProbeBW_CRUISE (BBR)
- MINOR: quic: reduce the private data size of QUIC cc algos
- CLEANUP: quic: remove a wrong comment about ->app_limited (drs)
- BUG/MINOR: quic: fix the wrong tracked recovery start time value
- BUG/MINOR: quic: too permissive exit condition for high loss detection in Startup (BBR)
- BUG/MINOR: cli: cli_snd_buf: preserve \r\n for payload lines
- REGTESTS: ssl: add a PEM with mix of LF and CRLF line endings
- BUG/MINOR: quic: missing Startup accelerating probing bw states
- CLEANUP: quic: Rename some BBR functions in relation with bw probing
- REORG: startup: move global.maxconn calculations in limits.c
- REORG: startup: move code that applies limits to limits.c
- REORG: startup: move nofile limit checks in limits.c
- MINOR: ssl: add utils functions to extract X509 notAfter date
- MINOR: ssl/cli: allow to filter expired certificates with 'show ssl sni'
- MINOR: ssl/cli: add -A to the 'show ssl sni' command description
- BUG/MINOR: ssl/cli: 'show ssl cert' escape the first '*' of a filename
- BUG/MINOR: ssl/cli: 'show ssl crl-file' escape the first '*' of a filename
- BUG/MINOR: ssl/cli: 'show ssl ca-file' escape the first '*' of a filename
- BUG/MEDIUM: stconn: Only consider I/O timers to update stream's expiration date
- BUG/MEDIUM: queues: Make sure we call process_srv_queue() when leaving
- BUG/MEDIUM: queues: Do not use pendconn_grab_from_px().
- CLEANUP: queues: Remove pendconn_grab_from_px().
- BUILD: debug: only dump/reset glitch counters when really defined
- MINOR: compiler: add a __has_builtin() macro to detect features more easily
- MINOR: compiler: rely on builtin detection for __builtin_unreachable()
- MINOR: compiler: add a new "ASSUME" macro to help the compiler
- MINOR: compiler: also enable __builtin_assume() for ASSUME()
- MINOR: compiler: add ASSUME_NONNULL() to tell the compiler a pointer is valid
- MINOR: bug: make BUG_ON() fall back to ASSUME
- CLEANUP: cache: use ASSUME_NONNULL() instead of DISGUISE()
- CLEANUP: hlua: use ASSUME_NONNULL() instead of ALREADY_CHECKED()
- CLEANUP: htx: use ASSUME_NONNULL() to mark the start line as non-null
- CLEANUP: mux-fcgi: use ASSUME_NONNULL() to indicate that the first block exists
- CLEANUP: stats: use ASSUME_NONNULL() to indicate that the first block exists
- CLEANUP: quic: replace ALREADY_CHECKED() with ASSUME_NONNULL() at a few places
- CLEANUP: ssl-sock: drop two now unneeded ALREADY_CHECKED()
- BUG/MEDIUM: mux-quic: do not mix qcc_io_send() return codes with pacing
- CLEANUP: mux-quic: remove unused qcc member send_retry_list
- MINOR: quic: add traces
- MINOR: mux-quic: refactor wait-for-handshake support
- MEDIUM/OPTIM: mux-quic: define a recv_list for demux resumption
- MEDIUM/OPTIM: mux-quic: implement purg_list
- MINOR: mux-quic: extract code to build STREAM frames list
- MINOR: mux-quic: split STREAM and RS/SS emission
- MEDIUM/OPTIM: mux-quic: do not rebuild frms list on every send
- MEDIUM: mux-quic: remove pacing specific code on qcc_io_cb
- MINOR: trace: implement tracing disabling API
- MINOR: mux-quic: hide traces when woken up on pacing only
- MINOR: ssl/cli: add a 'Uncommitted' status for 'show ssl' commands
- MINOR: ssl/ocsp: Add extra details in error logs when possible
- BUILD: ssl/ocsp: error: ‘%.*s’ directive argument is null
- MEDIUM: ssl/ocsp: OCSP response is expired with OCSP_MAX_RESPONSE_TIME_SKEW
- MINOR: ssl: improve HAVE_SSL_OCSP ifdef
- DOC: config: add example for server "track" keyword
- DOC: config: reorder "tune.lua.*" keywords by alphabetical order
- DOC: config: add "tune.lua.burst-timeout" to the list of global parameters
- MINOR: hlua: add option to preserve bool type from smp to lua
- REGTESTS: fix lua-based regtests using tune.lua.smp-preserve-bool
- BUG/MEDIUM: mux-quic: prevent BUG_ON() by refreshing frms on MAX_DATA
- CLEANUP: mux-quic: remove dead err label in qcc_build_frms()
- BUG/MINOR: h2/rhttp: fix HTTP2 conn counters on reverse
- MINOR: hlua: rename "tune.lua.preserve-smp-bool" to "tune.lua.bool-sample-conversion"
- MINOR: ssl: change visibility of ssl_stats_module
- MINOR: ssl: rework the error management in the OCSP callback
- MEDIUM: ssl/ocsp: counters for OCSP stapling
- CI: limit aws-lc and libressl Quic Interop to "haproxy" only
- BUG/MEDIUM: queue: Make process_srv_queue return the number of streams
- CI: github: try to build the latest WolfSSL master weekly
- CI: github: activate ASAN on the WolfSSL weekly job
- BUG/MINOR: stats: fix segfault caused by uninitialized value in "show schema json"
- MINOR: stktable: add stktable_get_data_type_idx() helper function
- MINOR: stktable: support optional index for array types in {set, clear, show} table commands
- CI: scripts: allow to build wolfssl with --enable-debug
- CI: github: activate debug in wolfssl weekly build
- BUG/MEDIUM: queues: Stricly respect maxconn for outgoing connections
- MEDIUM: queue: Handle the race condition between queue and dequeue differently
- CLEANUP: Remove pendconn_must_try_again().
- BUILD: compat: add missing fcntl.h before defining F_SETPIPE_SZ
- BUILD: mworker: always initialize the saveptr of strtok_r()
- BUILD: limits: make normalize_rlim() take an rlim_t to fix build on m68k
- BUG/MINOR: checks: handle a possible strdup() failure
- BUG/MINOR: listener: handle a possible strdup() failure
- BUG/MINOR: mux_h1: handle a possible strdup() failure
- BUG/MINOR: debug: handle a possible strdup() failure
As can be seen here, the build fails on m68k since commit 665dde648
("MINOR: debug: use LIM2A to show limits") in 3.1:
https://github.com/haproxy/haproxy/actions/runs/12440234399/job/34735360177
The reason is the comparison between a ulong limit and RLIM_INFINITY.
Indeed, on m68k, rlim_t is an unsigned long long. Let's just change
the function's input type to take an rlim_t instead. This also allows
to get rid of the casts in the call place.
This can be backported to 3.1 though it's not important given the low
prevalence of this platform for such use cases.
Building with some libcs which define strtok_r() as an inline function
can yield a possibly uninitialized warning due to a loop dereferencing
this save pointer early, even though the doc clearly mentions that it
is ignored. This is actually more of a mismatch between the compiler
and the libc (gcc-4.7 and glibc-2.23 in that case). It's trivial to
set s2 to NULL here so let's do it to please this old couple. Note
that while the warning is triggered in all supported versions, there's
no point backporting it since it's unlikely this combination will be
relevant outside of backwards compatibility checks now.
n 1.5-dev8, 13 years ago, support for setting pipe size was added by
commit bd9a0a778 ("OPTIM/MINOR: make it possible to change pipe size
(tune.pipesize)"). For compatibility purposes, it was defining
F_SETPIPE_SZ in compat.h if it was not set. It apparently always had
F_SETPIPE_SZ defined before being included.
Now in 3.2-dev1, commit fbc534a6f ("REORG: startup: move nofile limit
checks in limits.c") reordered a few includes and ended up with
mworker-prog.c including compat.h before fcntl.h, causing a redefinition
error on certain libcs:
CC src/mworker-prog.o
In file included from /usr/include/bits/fcntl.h:61:0,
from /usr/include/fcntl.h:35,
from include/haproxy/limits.h:11,
from include/haproxy/mworker.h:18,
from src/mworker-prog.c:27:
/usr/include/bits/fcntl-linux.h:203:0: warning: "F_SETPIPE_SZ" redefined [enabled by default]
In file included from include/haproxy/api-t.h:35:0,
from include/haproxy/api.h:33,
from src/mworker-prog.c:23:
include/haproxy/compat.h:161:0: note: this is the location of the previous definition
Let's simply include fcntl.h in compat.h before the macro is redefined.
There's normally no need to backport this, though it's harmless to do
it if needed.
There is a small race condition, where a server would check if there is
something left in the proxy queue, and adding something to the proxy
queue. If the server checks just before the stream is added to the queue,
and it no longer has any stream to deal with, then nothing will take
care of the stream, that may stay in the queue forever.
This was worked around with commit 5541d4995d, by checking for that exact
condition after adding the stream to the queue, and trying again to get
a server assigned if it is detected.
That fix lead to multiple infinite loops, that got fixed, but it is not
unlikely that it could happen again. So let's fix the initial problem
differently : a single server may mark itself as ready, and it removes
itself once used. The principle is that when we discover that the just
queued stream is alone with no active request anywhere ot dequeue it,
instead of rebalancing it, it will be assigned to that current "ready"
server that is available to handle it. The extra cost of the atomic ops
is negligible since the situation is super rare.
The "served" field of struct server is used to know how many connections
are currently in use for a server. But served used to be incremented way
after the server was picked, so there were race conditions that could
lead more than maxconn connections to be allocated for one server. To
fix this, increment served way earlier, and make sure at the time that
it never goes past maxconn.
We now should never have more outgoing connections than set by maxconn.
As discussed in GH #2286, {set, clear, show} table commands were unable
to deal with array types such as gpt, because they handled such types as
a non-array types, thus only the first entry (ie: gpt[0]) was considered.
In this patch we add an extra logic around array-types handling so that
it is possible to specify an array index right after the type, like this:
set table peer/table key mykey data.gpt[2] value
# where 2 is the entry index that we want to access
If no index is specified, then it implicitly defaults to 0 to mimic
previous behavior.
Same as stktable_get_data_type(), but tries to parse optional index in
the form "name[idx]" (only for array types).
Falls back to stktable_get_data_type() when no index is provided.
Since b3d5708 ("MINOR: stats: remove implicit static trash_chunk usage")
a segfault can occur when issuing "show schema json" on the stats socket.
Indeed, now the dumping functions don't rely on trash_chunk anymore, but
instead they rely on the appctx->chunk buffer. However, unlike other
stats dumping commands, the "show schema json" only have an io handler,
and no parse function. With other command, the parse function is
responsible for pre-setting some data, including applet ctx reservation.
Thus due to "show schema json" lacking parsing function, the applet ctx is
used uninitialized, which is a bug obviously.
To fix the issue we simply add a parse function for "show schema json",
although all it does for now is calling applet_reserve_svcctx() for the
current applet ctx.
This issue was reported by @dsuch in GH #2825. It must be backported up
to 3.0.
The WolfSSL latest version is still broken (5.7.4), no new release was
done with a new version.
Modify the weekly CI job so we could build with the latest git version.
Make process_srv_queue() return the number of streams unqueued, as
pendconn_grab_from_px() did, as that number is used by
srv_update_status() to generate logs.
This should be backported up to 2.6 with
111ea83ed4
Add 2 counters in the SSL stats module for OCSP stapling.
- ssl_ocsp_staple is the number of OCSP response successfully stapled
with the handshake
- ssl_failed_ocsp_stapled is the number of OCSP response that we
couldn't staple, it could be because of an error or because the
response is expired.
These counters are incremented in the OCSP stapling callback, so if no
OCSP was configured they won't never increase. Also they are only
working in frontends.
This was discussed in github issue #2822.
In order to add stats from other files, the ssl_stats_module need to be
visible from other files.
This moves the ssl_counters definition in ssl_sock-t.h and removes the
static of ssl_stats_module.
A better name was found for the option implemented in ec74438
("MINOR: hlua: add option to preserve bool type from smp to lua")
Indeed, "tune.lua.preserve-smp-bool {on | off}" wasn't explicit enough
nor did it encourage the adoption of the new "fixed" behavior (vs
historical behavior which is now considered as a bug).
Thus it becomes "tune.lua.bool-sample-conversion { normal | pre-3.1-bug }"
which actively encourage users to switch the new behavior after having
patched in-use Lua script if needed. From a technical point of view,
the logic remains the same, as the option currently defaults to
"pre-3.1-bug" to prevent script breakage, and a warning is emitted if
the option isn't set explicily and Lua is used.
Documentation and regtests were updated.
Must be backported in 3.1 with ec74438 and f2838f5 ("REGTESTS: fix
lua-based regtests using tune.lua.smp-preserve-bool")
Dedicated HTTP/2 stats proxy counters are available for current and
total number of HTTP/2 connection on both frontend and backend sides.
Both counters are simply incremented into h2_init().
This causes issues when using reverse HTTP. First, increment is not
performed on the expected side, as it is triggered before
h2_conn_reverse() which switches a connection from frontend to backend
or vice versa. For example on active revers side, h2_total_connections
is incremented on the backend only even after connection is reversed and
attached to a listener for the remainder of its lifetime.
h2_open_connections suffers from a similar but arguably worst behavior
as it is also decremented. If increment and decrement operations are not
performed on the same proxy side, which happens for every connection
which has been successfully reversed, it causes an invalid counter
value, possibly with an integer overflow.
To fix this, delay increment operations on reverse HTTP from h2_init()
to h2_conn_reverse(). Both counters are updated only after reverse has
completed, thus using the expected frontend or backend side.
To prevent overflow on h2_open_connections, ensure h2_release()
decrement is not performed if a connection is freed before achieving its
reversal, as in this case it would not have been accounted by H2
counters.
This should be backported up to 2.9.
This should fix github issue #2821.
STREAM frames emission in qcc_build_frms() has been splitted from
RESET_STREAM/STOP_SENDING into qcc_emit_rs_ss(). Now, the former cannot
fail, as such err label can be removed as it is unreachable.
This should be backported up to 3.1.
This should fix github issue #2824.
QUIC MUX emission has been optimized recently by recycling STREAM frames
list between emission cycles. This is done via qcc frms list member. If
new data is available, frames list must be cleared before the next
emission to force the encoding of new STREAM frames.
If a refresh frames list is missed, it would lead to incomplete data
emission on the next transfer. In most cases, this is detected via a
BUG_ON() inside qcc_io_send(), as qcs instances remains in send_list
after a qcc_send_frames() full emission.
A bug was recently found which causes this BUG_ON() crash. This is
directly related to flow control. Indeed, when sending credit is
increased on the connection or a stream, frames list should be cleared
as new larger STREAM frames could be encoded. This was already performed
on MAX_DATA/MAX_STREAM_DATA reception but only if flow-control limit was
unblocked. However this is not the proper condition and it may lead to
insufficient frames refresh and thus this BUG_ON() crash.
Fix this by adjusting the condition for frames refresh on flow control
credit increase. Now, frames list is cleared if real offset is not
blocked and soft offset was equal or greater to the previous limit.
Indeed, this is the only case in which frames refreshing is necessary as
it would result in bigger encoded STREAM frames.
This bug was detected on QUIC interop with go-x-net client. It can also
be reproduced, albeit not systematically, using the following command :
$ ngtcp2-client -q --no-quic-dump --no-http-dump \
--exit-on-all-streams-close --max-data 10 \
127.0.0.1 20443 -n10 "http://127.0.0.1:20443/?s=10k"
This bug appeared with the following patch. As it is scheduled for 3.1
backporting, the current fix should be backported with it.
14710b5e6b
MEDIUM/OPTIM: mux-quic: do not rebuild frms list on every send
Because of the previous commit, configs making use of lua script without
setting "tune.lua.smp-preserve-bool" explicitly now raise a warning.
However, since 6f746af91 ("REGTESTS: use -dW by default on every
reg-tests"), regtests are not allowed to raise warnings anymore.
Because of this the CI now fails for every tests that relies on Lua.
To fix this, let's explicitly set the "tune.lua.smp-preserve-bool" for
all tests involving Lua. Here we set the value to "on" because we know
it is safe to do so, and this way it will be future-proof.
If ec7443827 ("MINOR: hlua: add option to preserve bool type from smp to
lua") is backported, then this patch must be backported with it (if it
is not trivial to backport, then simply follow this rule: grep for
"lua-load" in reg-tests directory, then for each match, make sure to set
the tune.smp-preserve-bool tunable in the global section.
